Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2017 (211) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (211) (entfernen)
Sprache
- Englisch (203)
- Deutsch (7)
- Mehrsprachig (1)
Referierte Publikation
- ja (211) (entfernen)
Schlagworte
- Nanoparticle (11)
- Fluorescence (10)
- Mechanochemistry (9)
- Quantum yield (8)
- SAXS (7)
- Small-angle X-ray scattering (7)
- NIR (6)
- Femtosecond laser (5)
- IR (5)
- Lifetime (5)
- Quantification (5)
- Additive manufacturing (4)
- Degradation (4)
- Fatigue strength (4)
- Fracture mechanics (4)
- In situ (4)
- Lanthanide (4)
- Laser-induced periodic surface structures (LIPSS) (4)
- Multiple crack propagation (4)
- Residual stress (4)
- Residual stresses (4)
- Upconversion (4)
- Alkali-silica reaction (3)
- Cast iron (3)
- Computed tomography (3)
- Electron backscatter diffraction (3)
- Ellipsometry (3)
- Initial crack size (3)
- Integrating sphere spectroscopy (3)
- Laser ablation (3)
- MAG welding (3)
- MALDI-TOF MS (3)
- Method (3)
- Neutron diffraction (3)
- Phase transformation (3)
- Polymer (3)
- Raman spectroscopy (3)
- Sensor (3)
- Short crack propagation (3)
- Silver nanoparticles (3)
- Steel (3)
- X-ray computed tomography (3)
- XRD (3)
- Absolute fluorometry (2)
- Aktive Thermografie (2)
- Biodiesel (2)
- Brightness (2)
- Broadband Dielectric Spectroscopy (2)
- Broadband dielectric spectroscopy (2)
- Carbon fiber reinforced polymer (2)
- Carbon nanotubes (2)
- Composites (2)
- Concrete (2)
- Corrosion (2)
- Crystallization (2)
- DNA origami (2)
- Doped tin oxide (2)
- Dye (2)
- EBSD (2)
- Environment (2)
- Environmental stress cracking (ESC) (2)
- Epoxy resin (2)
- Fatigue (2)
- Femtosecond laser ablation (2)
- Gas sensing (2)
- Gefahrgutverpackung (2)
- Grain growth (2)
- Heat treatment (2)
- High-strength steel (2)
- High-strength steels (2)
- Iron oxide (2)
- LIBS (2)
- Laser-induced periodic surface structures (2)
- MALDI (2)
- Mechanical properties (2)
- Metal phosphonate (2)
- Microscopy (2)
- Microstructure (2)
- NMR (2)
- Nanocomposite (2)
- Nanocomposites (2)
- Nanocrystal (2)
- Nanostructures (2)
- Non-destructive testing (2)
- Oxidation (2)
- Polyethylen (2)
- Polylactide (2)
- Polylactides (2)
- Polymorphism (2)
- Porosity (2)
- Process parameters (2)
- Quantum dot (2)
- Rammed earth (2)
- Reliability (2)
- Restraint (2)
- Ring-opening polymerization (2)
- Semiconductor (2)
- Slow crack growth (SCG) (2)
- Spectroscopic ellipsometry (2)
- Surface chemistry (2)
- Thermography (2)
- Thin Films (2)
- Thin films (2)
- Titanium (2)
- ToF-SIMS (2)
- Wear (2)
- Welding (2)
- Welding simulation (2)
- Weldments (2)
- X-ray imaging (2)
- X-ray refraction (2)
- Zerstörungsfreie Prüfung (2)
- (Mn,Ga)As crystallites (1)
- 3D printing (1)
- 4'-hydroxyacetophenone (1)
- AC-nanochip calorimetry (1)
- AFM cantilever vibration (1)
- AFM intermittent contact (1)
- AFM tip shape (1)
- Aberfan flowslide (1)
- Abplatzen (1)
- Absolute flourescence (1)
- Absolute flourometry (1)
- Absolute fluoreometry (1)
- Accelerated time integration (1)
- Accuracy (1)
- Acoustic emissions analysis (1)
- Active and passive thermography (1)
- Active thermography (1)
- Adjustment calculation (1)
- Adsorption of phosphate (1)
- Ageing (1)
- Al-Cu-Li-Legierung (1)
- Alkali ingress (1)
- Aluminum alloy 2024-T3 (1)
- Amphiphilic dumbbells (1)
- Anodic oxidation (1)
- Antenna effect (1)
- Antifouling (1)
- Antiphase boundary (1)
- Aqdditive manufacturing (1)
- Archaeology (1)
- Artificial cells (1)
- Artificial turf (1)
- Artificial weathering (1)
- Assay (1)
- Asymmetric supercapacitor (1)
- Athletic tracks (1)
- Atomic force microscopy (1)
- Auger electron spectroscopy (1)
- Ausscheidungen (1)
- Axle (1)
- Azobenzene (1)
- BLE (1)
- BODIPY (1)
- Bacterial adhesion (1)
- Bacteroidetes (1)
- Ball milling (1)
- Behandlungsparameter (1)
- Biegefestigkeit (1)
- Biegesteifigkeit (1)
- Bio lubricants (1)
- Biocides (1)
- Bioconjugate (1)
- Biofilm (1)
- Biofilms (1)
- Biofuel cells (1)
- Biofuels (1)
- Biomass (1)
- Biomedical engineering (1)
- Biomineralization (1)
- Blockcopolymer (1)
- Bluetooth Low Energy (1)
- Bone tissue engineering (1)
- Bragg-edge imaging (1)
- Brake pad materials (1)
- Brand (1)
- Brass (1)
- Brithtness (1)
- Building materials (1)
- Building-blocks (1)
- CCS (1)
- CFK (1)
- CFRP (1)
- CO2-storage (1)
- Calcium alkali orthophosphate (1)
- Calcium phosphate (1)
- Calibration (1)
- Carbamazepine (1)
- Carbon fibre reinforced composite (1)
- Carbon fibres nanotubes interface (1)
- Carbon nanodots (1)
- Carbon-based nanomaterials (1)
- Carbon-fluorine bonds (1)
- Casting skin (1)
- Catalysis (1)
- Catalysts (1)
- Cationization (1)
- CdSe (1)
- Cell adhesion (1)
- Cellular solids (1)
- Ceramics (1)
- Cermet (1)
- Chemical analysis (1)
- Chemicals classification (1)
- Chemometrics (1)
- Circular dichroism (1)
- Climate simulation concrete prism test (1)
- Co-planar translational laminography (1)
- Cocrystal (1)
- Cocrystals (1)
- Colour center (1)
- Compatibility (1)
- Compatible solute (1)
- Complex formation (1)
- Complex structures (1)
- Component design (1)
- Compression (1)
- Compressive strength (1)
- Computational model for unsaturated flow (1)
- Computed thomography (1)
- Concrete pavement (1)
- Conductivity (1)
- Conductometry (1)
- Contamination (1)
- Continuum damage mechanics (1)
- Controlled radical polymerization (1)
- Coordination polymers (1)
- Copper (1)
- Correlative tomography (1)
- Corrosion fatigue (1)
- Corrosion resistance (1)
- Cr complex (1)
- Crack (1)
- Crack criterion (1)
- Crack detection (1)
- Crack driving force (1)
- Cracks (1)
- Creep (1)
- Critical micelle concentration (CMC) (1)
- Crystal phase determination (1)
- Crystal structure (1)
- Crystallography (1)
- Curing kinetics (1)
- Cuticle (1)
- Cyclic loading (1)
- Cyclic softening (1)
- Cyclopolymerization (1)
- Cysteine (1)
- C–C coupling (1)
- DNA (1)
- DSC (1)
- DSS (1)
- DSSC (1)
- Darkfield microscopy (1)
- Data correction (1)
- Data fusion (1)
- Decay time (1)
- Delamination (1)
- Dendrimersomes (1)
- Dendritic amphiphile (1)
- Dense alumina (1)
- Density functional theory (DFT) (1)
- Dentistry (1)
- Desiccation resistance (1)
- Dezincification (1)
- Dielectric materials (1)
- Dielectrics (1)
- Different electrochemical conditions (1)
- Different load cases (1)
- Differential scanning calorimetry (DSC) (1)
- Digital radiography (1)
- Dilatometry (1)
- Dislocations (1)
- Dispersity (1)
- Dissimilar welding (1)
- Distance transform (1)
- Doubly charged ions (1)
- Druckkraft (1)
- Dual emission (1)
- Dual-environment (1)
- Ductile cast iron (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dynamic fracture mechanics (1)
- EM-clustering (1)
- EN 16807-2016:12 (1)
- EPS (1)
- ESI-TOF-MS (1)
- EXAFS (1)
- Earth block masonry (EBM) (1)
- Economic wide technology replacement (1)
- Ectoine (1)
- Effective irradiation dose 0.2-16 [Gy] (1)
- Electroceramics (1)
- Electrochemical behavior (1)
- Electromagnetic scattering (1)
- Electron back-scattered diffraction (1)
- Electron irradiation 30 [kV] (1)
- Electronic structure (1)
- Electrospray ionization polymers (1)
- Emission standards (1)
- Emission test chamber (1)
- Emissivity (1)
- Energy efficiency (1)
- Energy input (1)
- Energy transfer (1)
- Epoxy (1)
- Etal-complexes (1)
- Ettringit (1)
- European Materials Research Society (E-MRS) (1)
- Excitation energy dependence (1)
- Excitation power density dependence (1)
- Excitation spectra (1)
- Exciton (1)
- External alkalis (1)
- External load test (1)
- FEA (1)
- FNCT (1)
- FRET (1)
- Fahrbahnbeton (1)
- Faserverbundwerkstoffe (CFK, GFK) (1)
- Fatigue assessment (1)
- Fatigue damage (1)
- Fatigue life time (1)
- Fatigue loading (1)
- Ferritic/martensitic steel (1)
- Festigkeitssteigerung (1)
- Feuchtetransport (1)
- Fibre reinforced composites (1)
- Film (1)
- Finite element method (1)
- Finite element simulation (1)
- Fire (1)
- Flame retardants (1)
- Flammability (1)
- Flowability (1)
- Fluid transport (1)
- Fluorescence probe (1)
- Focused ion beam tomography (1)
- Force-distance curves (1)
- Fourier series (1)
- Fracture energy (1)
- Friction (1)
- Friction stir welding (1)
- Full notch creep test (FNCT) (1)
- Full-notch creep test (FNCT) (1)
- Fungi (1)
- GMR (1)
- Gas permeation (1)
- Gas separation (1)
- Gas separation membrane (1)
- Gel electrophoresis (1)
- Gel-type electrolytes (1)
- Gelartige Elektrolyte (1)
- Geothermal environment (1)
- Germylium ions (1)
- Glass-ceramic (1)
- Globally Harmonized System of Classification and Labelling of Chemicals (1)
- Glow discharge processes (1)
- Gold nanoparticles (1)
- Grain pest beetles (1)
- Graphene (1)
- Graphene oxide (1)
- Grating interferometry (1)
- Greenhouse gas mitigation (1)
- Gurson model (1)
- HPC (1)
- HSC (1)
- HSQ (1)
- Halbleiterphysik (1)
- Haltezeit (1)
- Hard object collisions (1)
- Hazardous chemicals (1)
- Heat-affected zone (1)
- Heating (1)
- Heterogeneity (1)
- High Cycle Fatigue (HCF) (1)
- High ductility (1)
- High power welding (1)
- High-density polyethylene (PE-HD) (1)
- Historical earthen building (1)
- Ho(III) (1)
- Hochleistungsbeton (1)
- Hot cracking (1)
- Hybrid laser-arc weld (1)
- Hybrid nanoparticles (1)
- Hydrodefluorination (1)
- Hydrogen embrittlement (1)
- Hydrogen trapping (1)
- Hydrogen-assisted cracking (1)
- Hyperbranched polymers (1)
- I-shape sections (1)
- ISO 6892-1 (1)
- Imaging (1)
- Impact behaviour (1)
- In situ PXRD (1)
- In situ XRD (1)
- In situ bending tests (1)
- In situ near-infrared (NIR) spectroscopy (1)
- Integrating sphere (1)
- Intermetallic compound (1)
- Interpass temperature (1)
- Interphase (1)
- Iron oxide nanoparticles (1)
- Iron oxides (1)
- Iron-oxo oligomers (1)
- Irradiation (1)
- Irreversible polycondensation (1)
- Janus dendrimers (1)
- Kikuchi patterns (1)
- Knoevenagel condensation (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Krypton (1)
- LED phosphors (1)
- LPSO Phase (1)
- LTT (1)
- Lactides (1)
- Landslide propagation modelling (1)
- Laser Processing (1)
- Laser heated pedestal growth (1)
- Laser-induced breakdown spectroscopy (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Laser-induced redox reactions (1)
- Laser-material interactions (1)
- Layer-wise slurry deposition (1)
- Leaching (1)
- Leakage (1)
- Lean duplex stainless steel (1)
- Lewis-acids (1)
- Life cycle assessment (LCA) (1)
- Life time prediction (1)
- Life-cycle assessment (1)
- Liftetime (1)
- Ligand (1)
- Light-harvesting (1)
- Limiting oxygen concentration (1)
- Liquid chromatography at critical conditions (1)
- Liquid petroleum products (1)
- Liquid phase sintering (1)
- Lizard (1)
- Load partition (1)
- Long-Term Monitoring (1)
- Low blow (1)
- Low temperature (1)
- Lubricant films (1)
- MALDI TOF MS (1)
- MEMS (1)
- MOF (1)
- Magnetic nanoparticles (1)
- Magnetic properties (1)
- Magnetic stray field (1)
- Mandible (1)
- Martensitic stainless steels (1)
- Material (1)
- Materials characterization (1)
- Mechanism (1)
- Medical imaging (1)
- Melanised microcolonial fungi (MCF) (1)
- Mesoporous films (1)
- Metal matrix composite (1)
- Metastable (1)
- Method evaluation (1)
- Methodology (1)
- Methods (1)
- Mg-Y-Zn Alloy (1)
- Micelle (1)
- Micro-CT (1)
- Microalloyed steels (1)
- Microbial adhesion tests (1)
- Microcracking (1)
- Microcracks (1)
- Micromechanics model (1)
- Microstructure and texture (1)
- Mill scale (1)
- Milling (1)
- Model friction tests (1)
- Modeling (1)
- Moisture Measurement (1)
- Moisture clog (1)
- Moisture transport (1)
- Molecular mobility (1)
- Monitoring of damage (1)
- Morphology (1)
- Mouthguard (1)
- Multi-regional inputeoutput data (1)
- Multi-sample analysis (1)
- Multidimensional Spectroscopy (1)
- Müller Polarimetry (1)
- NMR spectroscopy (1)
- Nano (1)
- Nanoclays (1)
- Nanocluster (1)
- Nanocorrosion of aluminium and silicon (1)
- Nanoindentation (1)
- Nanoparticles (1)
- Nanophysik (1)
- Nanostructure (1)
- Nanostructured capacitors (1)
- Nanoviscosity (1)
- Nanowires (1)
- Neon (1)
- Network (1)
- Neutron Diffraction (1)
- Neutron imaging (1)
- Ni-Co oxide (1)
- Nickel-based superalloy (1)
- Nile Red (1)
- Niobium carbide (1)
- Nitrile rubber (1)
- Non-Destructive testing (1)
- Nonlinear (1)
- Notches (1)
- Numerical inversion (1)
- Numerische Simulation (1)
- Oligospiroketals (1)
- Online NMR spectroscopy (1)
- Optical Wavefield (1)
- Optoelektronik (1)
- Orientation mapping (1)
- Oxides (1)
- Oxyfuel (1)
- PET (1)
- PH (1)
- PIM-1 (1)
- PLGA cement (1)
- POD (1)
- POSS (1)
- Pacemaker (1)
- Parameter Study (1)
- Partial safety factor (1)
- Particle (1)
- Particle architecture (1)
- Particle size (1)
- Particle size gradation (1)
- Pavement concrete (1)
- Perzyna viscoplasticity (1)
- Phosphine-ligands (1)
- Photo physics (1)
- Photocatalysis (1)
- Photon counting detectors (1)
- Photovoltaics (1)
- Physical ageing (1)
- Physical hazards (1)
- Piezopolarisation (1)
- Pipeline (1)
- Pitfalls (1)
- Pitting corrosion (1)
- Plasma polymers (1)
- Plasmid DNA pUC19 (1)
- Plasmonic absorption (1)
- Plasmonics (1)
- Plate girders (1)
- Polarity (1)
- Poly(acrylic acid) (1)
- Poly- (hydroxyethylmethacrylate) (1)
- Polyacrylic acid (1)
- Polyamorphism (1)
- Polycaprolactone (1)
- Polyester (1)
- Polyester fabric strips (1)
- Polyethylene (PE-HD) (1)
- Polyethylenterephthalat (1)
- Polymer MALDI (1)
- Polymer based nanocomposites (1)
- Polymer degradation (1)
- Polymer-metal (1)
- Polymerization (1)
- Polymers of intrinsic microporosity (1)
- Polymorphic transition (1)
- Polymorphs (1)
- Polysaccharides (1)
- Polystyrene (1)
- Porosimetry (1)
- Porous materials (1)
- Post-welding Imperfections (1)
- Powder diffraction (1)
- Pre-Columbian ceramics (1)
- Principal component analysis (1)
- Probe (1)
- Process innovations (1)
- Projective geometry (1)
- Protein (1)
- Pseudo-dynamic loads (1)
- Pseudobrookite (1)
- Pullulan (1)
- Pyrazinamide (1)
- Quantum Yield (1)
- Quantum rod (1)
- Quantum yield standard (1)
- Quenching and partitioning (1)
- R-curve (1)
- RSSI (1)
- Radioprotector ectoine (1)
- Rapid prototyping (1)
- Reduced graphene oxide (1)
- Reference material (1)
- Reference materials (1)
- Refractive index (1)
- Residual Stresses (1)
- Resistance (1)
- Resonance (1)
- Resonance testing (1)
- Reverse time migration (1)
- Rheology (1)
- Ring-expansion polymerization (1)
- Rock-art caves (1)
- Room-temperature (1)
- Rope (1)
- Rubber (1)
- Rubber granules (1)
- Rust (1)
- Röntgen-3D-Computertomographie (1)
- SA508 (1)
- SEM–EDS/EBSD (1)
- SERS (1)
- SHPB (1)
- SPH (1)
- STEM/TEM imaging (1)
- Saxs (1)
- Scaffold (1)
- Scanning nano beam electron diffraction (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Scattering Theory (1)
- Sealing materials (1)
- Selective laser melting (1)
- Self-assembled structures (1)
- Semiconductor quantum dot (1)
- Shear test (1)
- Shear-compression tests (1)
- Shell (1)
- Shock absorbtion (1)
- Shore hardness (1)
- Shrinkage (1)
- Silica (1)
- Silica nanowires (1)
- Silicate glasses (1)
- Silicon (1)
- Silver (1)
- Simulation (1)
- Single crystal fiber (1)
- Sinter/sintering (1)
- Sliding friction (1)
- Small-angle x-ray scattering (1)
- Sn catalysts (1)
- Soft matter (1)
- Soyean oil (1)
- Spalling (1)
- Spannungsrissbeständigkeit (1)
- Specific heat spectroscopy (1)
- Specific surface (1)
- Spectroelectrochemistry (1)
- Spectroscopic ellipsomety (1)
- Sphingan (1)
- Spontane Polarisation (1)
- Spot welding (1)
- Spot welds (1)
- Spring Meeting 2016 (1)
- Stabilising agents (1)
- Stability (1)
- Standard (1)
- Standards (1)
- Stapeldruckprüfung (1)
- Starch (1)
- Static monitoring (1)
- Steam (1)
- Steel reinforced concrete (1)
- Stern Geary constant (1)
- Stern-Geary-Konstante (1)
- Stofftransport (1)
- Strengthening (1)
- Stress-strain behavior (1)
- Strontium yttrate (1)
- Structural Health Monitoring (1)
- Structural integrity (1)
- Structural properties (1)
- Structural relaxation (1)
- Structure solution (1)
- Sub-aerial biofilms (SAB) (1)
- Substitute model (1)
- Sulfobetaines (1)
- Supercapacitor (1)
- Superconducting magnets (1)
- Superconductor (1)
- Supercritical CO2 (1)
- Superparamagnetic nanoparticles (1)
- Superplasticity (1)
- Supra molecular polymerization (1)
- Surface analysis (1)
- Surface coating (1)
- Surface functionalization (1)
- Surface plasmon (1)
- Surface plasmon polariton (1)
- Surface plasmon resonance (1)
- Surface tension (1)
- Surface texture (1)
- Surface treatment (1)
- Surface wetting (1)
- Sustainability assessment (1)
- Symbiosis (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron, BAMline (1)
- Synthesis (1)
- TEM (1)
- TENSTAND WP4 Final Report (1)
- TIG-welding (1)
- TMF (1)
- Talbot-Lau interferometer (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Target plate material (1)
- Temper (1)
- Temperature (1)
- Tensile behavior (1)
- Tensile loading (1)
- Tensile properties (1)
- Tensile strength (1)
- Tensile testing procedure (1)
- Test methods (1)
- The charge transfer and ionization process (CTI) (1)
- Theory (1)
- Thermal desorption spectrometry (TDS) (1)
- Thermal diffusivity (1)
- Thermal softening (1)
- Thermische Diffusivität (1)
- Thermo-mechanical fatigue (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanical fatigue (1)
- Thermoresponsive polymers (1)
- Thermoresponsive polymres (1)
- Thick films (1)
- Thin film metrology (1)
- Thin polymeric films (1)
- Thiol (1)
- Three-dimensional printing (1)
- Ti-6Al-4V (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Tin catalysts (1)
- Titanite (1)
- Titanium alloy (1)
- Titanium alloys (1)
- Titanium dioxide (1)
- Titanium nitride films (1)
- Top-down (1)
- Transesterification (1)
- Transfer layer (1)
- Transformable steels (1)
- Transformation induced plasticity (1)
- Transmission Kikuchi diffraction (1)
- Transparent conductive oxides (1)
- Transport processes (1)
- UCST-type copolymer (1)
- UHMWPE (1)
- UN-GHS (1)
- UV radiation (1)
- UV/Vis and emission spectroscopy (1)
- Ultra thin polymer films (1)
- Ultra-Hochleistungsbeton (1)
- Ultrafast microscopy (1)
- Ultrasonic (1)
- Ultrasonic echo technique (1)
- Ultrasonic velocity (1)
- Uncertainty (1)
- Upconverion (1)
- VOC (1)
- Vapor-phase hydrofluorination (1)
- Vertebral (1)
- Vinyl fluoride (1)
- Void nucleation & growth (1)
- Volatile organic compound (1)
- Volumenbruchteil (1)
- Vorlagerungszeit (1)
- Vulcanisation system (1)
- Water oxydation catalysis (1)
- Welded Plate Girders (1)
- Welding residual stress (1)
- Welding residual stresses (1)
- Wärmebehandlung (1)
- X-ray CT (1)
- X-ray absorption fine structure (1)
- X-ray absorption near-edge structure (1)
- X-ray computer tomography (1)
- X-ray diffraction (1)
- X-ray diffractometry (XRD) (1)
- X-ray phase contrast (1)
- XAFS (1)
- XANES (1)
- XPS (1)
- Yb(III) (1)
- Yellowness index (1)
- Young's modulus (1)
- Young’s modulus (1)
- Zinc (1)
- Zinc(II) complexes (1)
- Zink (1)
- Zn-Fe-Zr nanoparticles (1)
- Zonierung (1)
- Zr(iV) compounds (1)
- biomineralization (1)
- calcium carbonate (1)
- microwave synthesis (1)
- nanoparticles (1)
- nucleation (1)
- photocatalysis (1)
- polymer additives (1)
- µCT (1)
- α-1,4- and α-1,6-glucans (1)
- β-eucryptite (1)
For the damage assessment of reinforced concrete structures the quantified ingress profiles of harmful species like chlorides, sulfates and alkali need to be determined. In order to provide on-site analysis of concrete a fast and reliable method is necessary. Low transition probabilities as well as the high ionization energies for chlorine and sulfur in the near-infrared range makes the detection of Cl I and S I in low concentrations a difficult task. For the on-site analysis a mobile LIBS-system (k = 1064 nm, Epulse ≤ 3 mJ, t = 1.5 ns) with an automated scanner has been developed at BAM. Weak chlorine and sulfur signal intensities do not allow classical univariate analysis for process data derived from the mobile system. In order to improve the analytical performance multivariate analysis like PLS-R will be presented in this work. A comparison to standard univariate analysis will be carried out and results covering important parameters like detection and quantification limits (LOD, LOQ) as well as processing variances will be discussed (Allegrini and Olivieri, 2014 [1]; Ostra et al., 2008 [2]). It will be shown that for the first time a low cost mobile system is capable of providing reproducible chlorine and sulfur analysis on concrete by using a low sensitive system in combination with multivariate evaluation.
Divalent metal phosphonates are promising hybrid materials with a broad field of application. The rich coordination chemistry of the phosphonate linkers enables the formation of structures with different dimensionalities ranging from isolated complexes and layered structures to porous frameworks incorporating various functionalities through the choice of the building blocks.
In brief, metal phosphonates offer an interesting opportunity for the design of multifunctional materials. Here, we provide a short review on the class of divalent metal phosphonates discussing their syntheses, structures, and applications. We present the advantages of the recently introduced mechanochemical pathway for the Synthesis of divalent phosphonates as a possibility to generate new, in certain cases metastable compounds. The benefits of in situ investigation of synthesis mechanisms as well as the implementation of sophisticated methods for the structure analysis of the resulting compounds are discussed.
Recent advances in our understanding of CaCO, nucleation from solution have provoked new and challenging questions. We have studied CaC03 formation using precipitation by carbonate ester hydrolysis which ensures precipitation from a strictly homogeneous solution state and allows “titrating” carbonate to a solution with a given Ca2+ concentration on a timescale suited for kinetic studies. Nucleation and crystallization were traced by combining dynamic light Scattering (DLS) and transmission electron microscopy (TEM). DLS served as in situ technique to identify the nucleation time, to monitor particle size evolution, to discriminate different precipitation mechanisms and to validate reproducibility. TEM snapshots taken during different stages of the precipitation process identified different phases and morphologies. At a high level of supersaturation homogeneous nucleation in solution led to the formation of amorphous CaC03 particles (diameter=30 nm), which transformed via vaterite to calcite. Nucleation occurred uniformly in solution which appears to be unique for the CaC03 System. In the presence of Na-polymethacrylate (Na-PMA), heterogeneous nucleation was suppressed and Ca-polymer aggregates were formed in the prenucleation stage. Beyond a critical threshold supersaturation CaC03 particles formed in solution outside of these aggregates. The nucleation process resembled that without additive, indicating that Na-PMA exerts only a minor effect on the CaC03 nucleation. In the postnucleation stage, the polymer led to the formation of extended liquid-like networks, which served as a precursor phase for solid ACC particles that formed alongside the network.
The rational design of brighter upconversion nanoparticles (UCNPs) requires a better understanding of the radiationless deactivation pathways in these materials. Here, we demonstrate the potential of excitation power density (P)-dependent studies of upconversion (UC) luminescence intensities, slope factors, and absolute quantum yields (ΦUC) of popular β-NaYF4:20% Yb3+,2% Er3+ UCNPs of different surface chemistries in organic solvents, D2O, and water as a tool to gain deeper insight into the UC mechanism including population and deactivation pathways particularly of the red emission. Our measurements, covering a P regime of three orders of magnitude, reveal a strong difference of the P-dependence of the ratio of the green and red luminescence bands (Ig/r) in water and organic solvents and P-dependent population pathways of the different emissive energy levels of Er3+. In summary, we provide experimental evidence for three photon processes in UCNPs, particularly for the red emission. Moreover, we demonstrate changes in the excited population dynamics via bi- and triphotonic processes dependent on the environment, surface chemistry, and P, and validate our findings theoretically
Experimental and analytical investigation of the TMF-HCF lifetime behavior of two cast iron alloys
(2017)
The combined loading Thermomechanical Fatigue (TMF) with High Cycle Fatigue (HCF) has been experimentally investigated for two cast iron alloys. Both alloys contain globular graphite nodules but the first one has a ferritic structure while the second one has an austenitic crystal structure. In particular, the influences of the HCF frequency, of the HCF loading amplitude and of the location of the superposed HCF cycles have been investigated. It was observed that the HCF frequency has a limited impact on the fatigue life. On the other side, the HCF-strain amplitude has a highly non-linear influence on the fatigue life. The experimental results can be understood in terms of a fracture mechanics based damage mechanism: Cracks quickly initiate due to the TMF loading and the growth of the cracks up to a few mm controls the fatigue life. If HCF-loading cycles are superposed, cyclic crack propagation dramatically accelerates after a threshold has been reached. This threshold is regarded as controlling the fatigue life reduction. The previous ideas have been expressed in a model that can be very simply applied to estimate the fatigue life reduction ratio due to the superposed HCF cycles. It only contains two adjustable parameters and can be combined with any TMF life assessment model.
Particle size gradation is regarded as an effective method for overcoming the contradicting requirements in three-dimensional printing (3DP). In present work, particle size gradation was optimized to obtain both acceptable flowability of the powder material and high-strength 3D-printed glass-ceramic products. The effect of gradation on the printing process, sintering process and performance of the 3D-printed glass-ceramic products was investigated comprehensively. The glass-ceramic powders with three size ranges were mixed in certain proportions and applied to print parts. The result showed parts printed with powder mixed by 60 wt% 45–100 µm and 40 wt% 0–25 µm particles had satisfactory density of 1.60 g/cm³ and bending strength of 13.8 MPa. The flowability decreased with an increasing proportion of fine particles. Part density was determined by the powder bulk density in the powder bed as well as the shrinkage during sintering while strength of part was found to be dependent on the sintering degree.
l-lactide or meso-lactide are polymerized either at 120 °C where the polymerization process of l-lactide is accompanied by crystallization, or at 180 °C where poly(l-lactide) remains in the molten state. Polymerizations at 120 °C initially yield even-numbered chains (with respect to lactic acid units) having relatively low dispersity, but the fraction of odd-numbered chains increases with time and the entire molecular weight distribution changes. Traces of cyclics are only formed after 7 d. Polymerizations at 180 °C yield equilibrium of even and odd-numbered chains from the beginning, but at low monomer/initiator ratios and short reaction times (<4 h) cyclics are again not formed. They appear at longer reaction times and entail higher dispersities. The results are discussed in terms of five different transesterification mechanisms.
L-Lactides were polymerized in bulk at 120 or 160 °C with cyclic dibutyltin catalysts derived from 1,2-dimercaptoethane or 2-mercaptoethanol. Only linear chains having one benzyl ester and one OH-end group were obtained when benzyl alcohol was added. When L-lactides were polymerized with neat dibutyl-2-stanna-1,3-dithiolane, exclusively cyclic polylactides were formed even at 120 °C. The temperature, time and monomer/catalyst ratio (M/C) were varied. These results are best explained by a combination of ring-expansion polymerization and ring-extrusion of cyclic oligo- or polylactides with Elimination of the cyclic catalyst. Neither syntheses of linear polylactides nor of cyclic lactides involved racemization up to 20 h at 160 °C.
Magura Cave, north-western Bulgaria, possesses valuable rock-art paintings made with bat guano and dated from the period between the Eneolithic and Bronze Ages. Since 2008, the Art Gallery is closed to the general public in order to protect the paintings from vandalism, microclimatic changes caused by visitors and artificial illumination, and the consequent growth of fungi and phototrophs. Nevertheless, some tourist visits are allowed under the supervision of cave managers. This study provides the first scientific report on cultivable fungal assemblages dwelling different substrata in the Art Gallery. A total of 78 strains, belonging to 37 OTUs (Ascomycota 81%, Zygomycota 13%, Basidiomycota 5%), were isolated in the study. This fungal diversity was clearly dominated by Penicillium (50% of strains) and Aspergillus (13%). The most relevant visible fungal colonies were detected in sediments rich in bat guano, where, besides Penicillium, other guanophilic fungi such as Mucor, Mortierella, Trichosporon and Trichoderma were dominant. Conversely, scarce fungi were detected on rock surface of painted walls. Based on the biocide susceptibility assay, octylisothiazolinone (OIT) and benzalkonium chloride (BAC) were effective inhibiting the in vitro growth of dominant fungal species in Magura Cave, when applied at concentrations ranged from 100 to 1,000 mg/L. These data provide a valuable knowledge about Magura fungi, and exemplify a type of preliminary test that may be conducted before planning any biocide treatment. However, considering the irreversible effects of biocides on the ecological balance in caves, and the low fungal contamination in painted walls of Magura Cave, there is no reason to use conventional biocides in this cave. Further studies, monitoring microbial communities and microclimatic parameters, should be conducted to improve the knowledge on microbial ecology in Magura Cave and possible human impacts, as well as to allow the early detection of potential microbial outbreaks.
A facile method to probe the vascular permeability of nanoparticles in nanomedicine applications
(2017)
The effectiveness of nanoparticles (NP) in nanomedicine depends on their ability to extravasate from vasculature towards the target tissue. This is determined by their permeability across the endothelial barrier. Unfortunately, a quantitative study of the diffusion permeability coefficients (Pd) of NPs is difficult with in vivo models. Here, we utilize a relevant model of vascular-tissue interface with tunable endothelial permeability in vitro based on microfluidics. Human umbilical vein endothelial cells (HUVECs) grown in microfluidic devices were treated with Angiopoietin 1 and cyclic adenosine monophosphate (cAMP) to vary the Pd of the HUVECs monolayer towards fluorescent polystyrene NPs (pNPs) of different sizes, which was determined from image analysis of their fluorescence intensity when diffusing across the monolayer. Using 70 kDa dextran as a probe, untreated HUVECs yielded a Pd that approximated tumor vasculature while HUVECs treated with 25 μg/mL cAMP had Pd that approximated healthy vasculature in vivo. As the size of pNPs increased, its Pd decreased in tumor vasculature, but remained largely unchanged in healthy vasculature, demonstrating a trend similar to tumor selectivity for smaller NPs. This microfluidic model of vascular-tissue interface can be used in any laboratory to perform quantitative assessment of the tumor selectivity of nanomedicine-based systems.
Control of organic polymorph formation: crystallization pathways in acoustically levitated droplets
(2017)
Theoretical and experimental studies indicate that crystal nucleation can take more complex pathways than expected on the ground of the classical nucleation theory. Among these pathways are the formation of pre-nucleation clusters and amorphous precursor phases. A direct in situ observation of the different pathways of nucleation from solution is challenging since the paths can be influenced by heterogeneous nucleation sites, such as container walls. Here, we provide insights into the crystallization process using the in situ combination of an acoustic levitator, Raman spectroscopy, and X-ray scattering. The contactless sample holder enables the observation of homogeneous crystallization processes and the detection of intermediates and final crystalline forms. We provide evidence for the existence of multiple pathways of nucleation based on the investigation of the crystallization of organic molecules from different solvents. Starting from a diluted solution, a supersaturation is reached during the experiment due to the evaporation of the solvent. The highly supersaturated solution reveals different pathways of crystallization. Depending on the degree of supersaturation either the thermodynamically stable or the metastable crystal form is observed.
Iron can form numerous oxides, hydroxides, and oxide−hydroxides. Despite their relevance, many of the transformation processes between these phases are still poorly understood. In particular the crystallization of quasi-amorphous hydroxides and oxide−hydroxides is difficult to assess, since typical diffraction and scattering methods provide only sampleaveraged information about the crystallized phases. We report a new approach for the investigation of the crystallization of oxide−hydroxides. The approach relies on model-type films that comprise a defined homogeneous nanostructure. The nanostructure allows quantitative linking of Information obtained by bulk-averaging diffraction techniques (XRD, SAXS) with locally resolved information, i.e., Domain sizes (SEM, TEM, LEEM) and phase composition (SAED). Using time-resolved imaging and diffraction we deduce mechanism and kinetics for the crystallization of ferrihydrite into hematite. Hematite forms via nucleation of hematite domains and subsequent Domain growth that terminates only upon complete transformation. A Johnson−Mehl−Avrami−Kolmogorov model describes the kinetics over a wide temperature range. The derived understanding enables the first synthesis of ferrihydrite films with ordered mesoporosity and quantitative control over the films’ hematite and ferrihydrite content.
TMF tests were carried out on EN-GJSA-XNiSiCr35-5-2 at constant minimum temperature (400 °C) and varying maximum temperatures (Tmax = 700 °C, 800 °C, 900 °C) with hold times of 180 s at Tmax and two phase angles (in-phase (IP), 180° out-of-phase (OP)). The results showed a comparable strength under OP- and IP-TMF loading. At Tmax = 700 °C and 900 °C, the lifetime in IP-tests was slightly longer than that of OP-tests, while it is vice versa at Tmax = 800 °C. The IP-tests at Tmax = 900 °C showed a similar lifetime as OP-tests at Tmax = 700 °C and 800 °C, which was unexpected for such a high testing temperature. All IP-tests at Tmax = 900 °C showed a continuous cyclic softening from the beginning on, which was different from all other testing conditions. Complementary metallographic investigations indicated that under this test condition, intergranular creep damage is present in the volume of the test pieces.
Complex formation and the coordination of zirconium with acetic acid were investigated with Zr K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) and single-crystal diffraction. Zr K-edge EXAFS spectra show that a stepwise increase of acetic acid in aqueous solution with 0.1 M Zr(IV) leads to a structural rearrangement from initial tetranuclear hydrolysis species [Zr4(OH)8(OH2)16]8+ to a hexanuclear acetate species Zr6(O)4(OH)4(CH3COO)12. The solution species Zr6(O)4(OH)4(CH3COO)12 was preserved in crystals by slow evaporation of the aqueous solution. Single-crystal diffraction reveals an uncharged hexanuclear cluster in solid Zr6(μ3-O)4(μ3-OH)4(CH3COO)12·8.5H2O. EXAFS measurements show that the structures of the hexanuclear zirconium acetate cluster in solution and the solid state are identical.
An improved method of powder 3D printing leading to dense ceramic parts is presented. The application of powder-based binder jetting 3D printing technologies to technical ceramics is generally limited by the low packing density of the powder and by the need to use a flowable powder. With layer-wise slurry deposition, it is, however, possible to deposit powder beds with high particle packing and furthermore using submicron powders. This method was combined with the binder jetting technology to develop a novel process, named LSD-print. By means of LSD-print, a submicron Al2O3 powder could be processed to produce samples with a density comparable with that of standard pressed samples, both in the green state and after sintering.
This study assesses the structural vulnerability of part of a later medieval earthen building at
Ambel (near Zaragoza, Spain), once a preceptory or monastic house belonging to the Military
Orders. An inspection of its morphology and materials coupled with the results of an extensive
campaign of static monitoring reveals marked structural inhomogeneities, the product of more
than a thousand years of construction, failure, and repair from the 10th century to the present
day. Building materials are inappropriately juxtaposed, there are discontinuities between construction
phases and fundamental concerns remain over the long-term stability of the structure.
The current condition of the structure is mainly influenced by structural discontinuities introduced
at the time of construction, the unintended consequences of repair and modification and the
material decay that has affected the base of the rammed earth walls. The overall findings of the
static monitoring show that there is no related damage, variations in crack widths are related to
the building seasonal cycle. While static analysis is an essential prerequisite before a suitable
maintenance program can be fully defined, this study argues that no evaluation of the structural
behavior of any historic building can afford to ignore its archaeological “biography” of modification
and repair.
Using continuum damage mechanics (CDM) for lifetime prediction requires numerical integration of evolving damage until the onset of failure. The primary challenge for the simulation of structural fatigue failure is caused by the enormous computational costs due to cycle-by-cycle temporal integration throughout the whole loading history, which is in the order of 103–107 cycles. As a consequence, most approaches circumvent this problem and use empirical methods such as Wöhler curves. They are well suited for approximating the lifetime, but they are not capable to capture a realistic degradation of the material including redistribution of stresses. The main objective of the paper is to provide a technique for finite element (FE) simulations of structures under fatigue loading while reducing computational costs.
A Fourier transformation-based temporal integration (FTTI) scheme is proposed, which adapts the conventional FE method for modeling the viscoplastic deterioration in a structure subjected to cyclic loading. The response fields are represented by a Fourier series which assumes a temporal scale separation: a microchronological (short time) scale arises from the oscillatory loading and a macrochronological (long time) scale is due to the slow material relaxation resulting from yielding and damage evolution. The original dynamic boundary value problem (BVP) is approximated by the stationary BVP on the microchronological scale. Alternation of the displacement field on the macrochronological scale is correlated with evolution of the history variables by means of a high order adaptive cycle jump method. Performance and significant acceleration of the FE simulations is demonstrated at different loading scenarios for a constitutive damage model where the progressive damage accumulation is driven by viscoplastic yielding.
This article reports on the characterization of four superparamagnetic iron oxide nanoparticles stabilized with dimercaptosuccinic acid, which are suitable candidates for reference materials for magnetic properties. Particles p1 and p2 are single-core particles, while p3 and p4 are multi-core particles. Small-angle X-ray scattering analysis reveals a lognormal type of size distribution for the iron oxide cores of the particles. Their mean radii are 6.9 nm (p1), 10.6 nm (p2), 5.5 nm (p3) and 4.1 nm (p4), with narrow relative distribution widths of 0.08, 0.13, 0.08 and 0.12. The cores are arranged as a clustered network in the form of dense mass fractals with a fractal dimension of 2.9 in the multi-core particles p3 and p4, but the cores are well separated from each other by a protecting organic shell. The radii of gyration of the mass fractals are 48 and 44 nm, and each network contains 117 and 186 primary particles, respectively. The radius distributions of the primary particle were confirmed with transmission electron microscopy. All particles contain purely maghemite, as shown by X-ray absorption fine structure spectroscopy
Ti-6Al-4V bridges were additively fabricated by selective laser melting (SLM) under different scanning speed conditions, to compare the effect of process energy density on the residual stress state. Subsurface lattice strain characterization was conducted by means of synchrotron diffraction in energy dispersive mode. High tensile strain gradients were found at the frontal surface for samples in an as-built condition. The geometry of the samples promotes increasing strains towards the pillar of the bridges. We observed that the higher the laser energy density during fabrication, the lower the lattice strains. A relief of lattice strains takes place after heat treatment.
Single-wire gas metal arc welding (SGMAW) and high power tandem GMAW (TGMAW) are evaluated with respect to energy efficiency. The key performance indicator electrical deposition efficiency is applied to reflect the energy efficiency of GMAW in different material transfer modes. Additionally, the wall-plug efficiency of the equipment is determined in order to identify the overall energy consumption. The results show that energy efficiency can be increased by 24% and welding time is reduced over 50% by application of the tandem processes. A comparative life cycle assessment of a 30-mm-thick weld is conducted to investigate the influences of the energy efficiency on the environmental impacts. The environmental impacts on the categories global warming potential, acidification potential, eutrophication potential, and photochemical ozone creation potential can be reduced up to 11% using an energy-efficient TGMAW process.
Specific heat spectroscopy (SHS) employing AC nanochip calorimetry was used to investigate the glassy dynamics of ultra-thin films (thicknesses: 10 nm–340 nm) of a polymer blend, which is miscible in the bulk. In detail, a Poly(vinyl methyl ether) (PVME)/Polystyrene (PS) blend with the composition of 25/75 wt. % was studied. The film thickness was controlled by ellipsometry while the film topography was checked by atomic force microscopy. The results are discussed in the framework of the balance between an adsorbed and a free surface layer on the glassy dynamics. By a self-assembling process, a layer with a reduced mobility is irreversibly adsorbed at the polymer/substrate interface. This layer is discussed employing two different scenarios. In the first approach, it is assumed that a PS-rich layer is adsorbed at the substrate. Whereas in the second approach, a PVME-rich layer is suggested to be formed at the SiO2 substrate. Further, due to the lower surface tension of PVME, with respect to air, a nanometer thick PVME-rich surface layer, with higher molecular mobility, is formed at the polymer/air interface. By measuring the glassy dynamics of the thin films of PVME/PS in dependence on the film thickness, it was shown that down to 30 nm thicknesses, the dynamic Tg of the whole film was strongly influenced by the adsorbed layer yielding a systematic increase in the dynamic Tg with decreasing the film thickness. However, at a thickness of ca. 30 nm, the influence of the mobile surface layer becomes more pronounced. This results in a systematic decrease in Tg with the further decrease of the film thickness, below 30 nm. These results were discussed with respect to thin films of PVME/PS blend with a composition of 50/50 wt.%as well as literature results.
A copolymer consisting of acrylamide (AAm) and acrylonitrile (AN) in aqueous solution was investigated using broadband dielectric spectroscopy at frequencies between 10⁻¹ Hz and 10⁶ Hz in the temperature range from 2 °C to 60 °C. This system shows an UCST phase behavior. The phase transition and aggregation behavior is monitored by both the temperature and frequency dependence of the complex conductivity σ*(f, T), where the AN fraction and the concentration of the solution were varied.
Additionally, the dielectric data are compared with the results obtained from dynamic light scattering measurements. The temperature dependence of the DC conductivity (σDC) of the copolymer solution is monitored and the phase transition temperature (PTT) of the poly(AAm-co-AN) copolymer is deduced from a change in the T-dependence of the DC conductivity. The change in σDC can be explained by decreased effective charge carrier mobility and a reduction of the effective charge number density at temperatures below the phase Transition temperature of the poly(AAm-co-AN) solution. A pronounced interfacial polarization effect on the frequency dependence of the real part of the conductivity (σ') is observed at temperatures below the phase Transition temperature. The charge carriers are blocked at the formed aggregates giving rise to this interfacial polarization. The dependence of the interfacial polarization on the acrylonitrile fraction in the copolymer and the concentration of the solution is studied in detail and conclusions concerning the internal structures of the copolymer aggregates are drawn.
The duplex stainless steel 1.4062 (X2CrNiN22-2) is used as alternative material to austenitic stainless steels in the construction industry. The corrosion resistance of welded seams is influenced by the base material, the weld filler material, the welding process and also by the final surface treatment. The scale layer next to the weld seam can be removed by grinding, pickling, electro-polished or blasting depending on the application and the requested corrosion resistance. Blasted surfaces are often used in industrial practice due to the easier and cheaper manufacturing process compared to pickled or electro-polished surfaces. Furthermore blasting with corundum-grain is more effective than blasting with glass-beads which also lower the process costs. In recent years, stainless steel surfaces showed an unusually high susceptibility to pitting corrosion after grinding with corundum. For this reason, it is now also questioned critically whether the corrosion resistance is influenced by the applied blasting agent. This question was specifically investigated by comparing grinded, pickled, corundum-grain- and glass-bead-blasted welding seams. Results of the SEM analyses of the blasting agents and the blasted surfaces will be presented and correlated with the different performed corrosion tests (potential measurement, KorroPad-test and pitting potential) on welding seams with different surface treatments.
The novel heat treatment concept, “quenching and partitioning” (Q&P) has been developed for high strength steels with enhanced formability. This heat treatment involves quenching of austenite to a temperature between martensite start and finish, to receive a several amount of retained austenite. During the subsequent annealing treatment, the so called partitioning, the retained austenite is stabilized due to carbon diffusion, which results in enhanced formability and strength regarding strain induced austenite to martensite transformation. In this study a Q&P heat treatment was applied to a Fe-0.45C-0.65Mn-0.34Si-13.95Cr stainless martensite. Thereby the initial quench end temperature and the partitioning time were varied to characterize their influence on microstructural evolution. The microstructural changes were analysed by dilatometer measurements, X-ray diffraction and scanning electron microscopy, including electron backscatter diffraction. Compression testing was made to examine the mechanical behaviour. It was found that an increasing partitioning time up to 30 min leads to an enhanced formability without loss in strength due to a higher amount of stabilized retained and reversed austenite as well as precipitation hardening.
First single crystal fibers of cerium doped Strontium yttrate were fabricated using the laser-heated pedestal growth technique. Through thermodynamic Equilibrium calculations and by high-temperature mass spectrometry suitable growth conditions could be determined. The atmosphere played an important role during crystallization. It affected the composition shift, on the one hand, and the valence state of cerium, on the other hand. These dependencies can be explained by combining X-ray diffraction, elemental analysis, and optical spectroscopy. Crystallization in slightly reducing nitrogen atmosphere proved to be a reasonable choice, because evaporation is suppressed and trivalent cerium is stabilized. Strong green emission that depends on the Oxygen fugacity during crystallization could be excited using UV light. Optical properties of SrY2O4:Ce3+ were measured for the first time.
An UCST-type copolymer of acrylamide (AAm) and acrylonitrile (AN) (poly(AAm-co-AN)) was prepared by reversible addition fragmentation chain transfer (RAFT) polymerization and its temperature-induced phase transition and aggregation behaviour studied by turbidimetry, static and dynamic light scattering, small angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM) measurements. The phase transition temperature was found to increase with increasing AN content in the copolymer, concentration of the solutions and copolymer chain length. A significant effect was observed onto the phase transition temperature by addition of different electrolytes into the copolymer solution. The copolymer chains were aggregated below the phase transition temperature and disaggregated above it. The size of the aggregates increases with increasing AN contents and concentration of the copolymer solutions below the phase transition temperature. The copolymer chains were expanded and weekly associated in solution above the phase transition temperature. A model is proposed to explain such association–aggregation behaviour of poly(AAm-co-AN) copolymers depending on AN contents and concentration of the copolymer solutions as a function of temperature.
The paper presents a new method for the determination and evaluation of tafel factors using gel-type electrolytes and electrochemical frequency modulation technique (EFM). This relatively new electrochemical method offers the possibility to determine both polarization resistances and tafel factors within one measurement and in short measuring intervals. Starting from a comprehensive parameter study it is shown that a direct relationship between the two values exists that can be described mathematically. This contribution presents the determined tafel factors for the system gel-type electrolyte/zinc and discusses their applicability and their limits.
The cocrystal formation of pyrazinamide (PZA) with malonic acid (MA) was studied in situ. The mechanochemical reaction proceeds via conversion of a crystalline intermediate (PZA:MA II) into the thermodynamically more stable form (PZA:MA I) upon further grinding. The information derived from in situ powder X-ray diffraction (PXRD) enabled the isolation of this new metastable polymorph. On the basis of the PXRD data, the crystal structure of the 1:1 cocrystal PZA:MA II was solved. The polymorphs were further characterized and compared by Raman spectroscopy, solid-state NMR spectroscopy, differential thermal analysis/thermogravimetric analysis, and scanning electron microscopy. Our study demonstrates how monitoring mechanochemical reactions by in situ PXRD can direct the discovery and isolation of even short-lived intermediates not yet accessed by conventional methods.
Background: Gas sensors are very important in several fields like gas monitoring, safety and environmental applications. In this approach, a new gas sensing concept is investigated which combines the powerful adsorption probability of metal oxide conductive sensors (MOS) with an optical ellipsometric readout. This concept Shows promising results to solve the problems of cross sensitivity of the MOS concept.
Results: Undoped tin oxide (SnOx) and iron doped tin oxide (Fe:SnOx) thin add-on films were prepared by magnetron sputtering on the top of the actual surface plasmon resonance (SPR) sensing gold layer. The films were tested for their sensitivity to several gas species in the surface plasmon resonance enhanced (SPREE) gas measurement. It was found that the undoped tin oxide (SnOx) shows higher sensitivities to propane (C3H8) then to carbon monoxide (CO). By using Fe:SnOx, this relation is inverted. This behavior was explained by a change of the amount of binding sites for CO in the layer due to this iron doping. For hydrogen (H2) no such relation was found but the sensing ability was identical for both layer materials. This observation was related to a different sensing mechanism for H2 which is driven by the Diffusion into the layer instead of adsorption on the surface.
Conclusion: The gas sensing selectivity can be enhanced by tuning the properties of the thin film overcoating. A relation of the binding sites in the doped and undoped SnOx films and the gas sensing abilities for CO and C3H8 was found. This could open the path for optimized gas sensing devices with different coated SPREE sensors.
Nanoscale building blocks impart added functionalities to microelectromechanical systems (MEMS). The integration of silicon nanowires with MEMS-based sensors leading to miniaturization with improved sensitivity and higher noise immunity is one example highlighting the advantages of this multiscale approach. The accelerated pace of research in this area gives rise to an urgent need for batch-compatible solutions for scaling to nano. To address this challenge, a monolithic fabrication approach of silicon nanowires with 10-lm-thick silicon-on-insulator (SOI) MEMS is developed in this work. A two-step Si etching approach is adopted, where the first step creates a shallow surface protrusion and the second step releases it in the form of a nanowire. It is during this second deep etching step that MEMS—with at least a 2-order-of-magnitude scale difference - is formed as well. The technique provides a pathway for preserving the lithographic resolution and transforming it into a very high mechanical precision in the assembly of micro- and nanoscales with an extreme topography. Validation of the success of integration is carried out via in situ actuation of MEMS inside an electron microscope loading the nanowire up to its fracture. The technique yields nanowires on the top surface of MEMS, thereby providing ease of access for the purposes of carrying out surface processes such as doping and contact formation as well as in situ observation. As the first study demonstrating such monolithic integration in thick SOI, the work presents a pathway for scaling down to nano for future MEMS combining multiple scales.
This study presents the synthesis and characterization of zwitterionic core–shell hybrid nanoparticles consisting of a core of iron oxide multicore nanoparticles (MCNPs, γ-Fe2O3) and a shell of sultonated poly(2-vinylpyridine-grad-acrylic acid) copolymers. The gradient copolymers are prepared by reversible addition fragmentation chain transfer polymerization of 2-vinylpyridine (2VP), followed by the addition of tert-butyl acrylate and subsequent hydrolysis. Grafting of P(2VP-grad-AA) onto MCNP results in P(2VP-grad-AA)@MCNP, followed by quaternization using 1,3-propanesultone-leading to P(2VPS-grad-AA)@MCNP with a zwitterionic shell. The resulting particles are characterized by transmission electron microscopy, dynamic light scattering, and thermogravimetric analysis measurements, showing particle diameters of ≈70–90 nm and an overall content of the copolymer shell of ≈10%. Turbidity measurements indicate increased stability toward secondary aggregation after coating if compared to the pristine MCNP and additional cytotoxicity tests do not reveal any significant influence on cell viability.
This work demonstrates that phase-segregated poly(ester urethane) (PEU) with switching segments of crystallizable poly(1,4-butylene adipate) (PBA) can be programmed to generate two separate stress recovery events upon heating under constant strain conditions. For programming, two elongations are applied at different temperatures, followed by unloading and cooling. During the adjacent heating, two-step stress recovery is triggered. The results indicate that the magnitude of the stress recovery signals corresponds to the recovery of the two deformation stresses in reverse order. As demonstrated by further experiments, twofold stress recovery can be detected as long as the elongation at higher temperature exceeds the strain level of the deformation at lower temperature. Another finding includes that varying the lower deformation temperature enables a control over the stress recovery temperature and thus the implementation of so-called “temperature-memory effects”. Moreover, exerting only one elongation during programming enables a heating-initiated one-step stress recovery close to the deformation temperature. Based on these findings, such polymers may offer new technological opportunities in the fields of active assembly when used as fastening elements and in functional clothing when utilized for compression stockings.
Flash thermography is a fast and reliable non-destructive testing method for the investigation of defects in carbon fiber reinforced polymer (CFRP) materials. In this paper numerical simulations of transient thermography data are presented, calculated for a quasi-isotropic flat bottom hole sample. They are compared to experimental data. These simulations are one important step towards the quantitative reconstruction of a flaw by assessing thermographic data. The applied numerical model is based on the finite-element method, extended by a semi-analytical treatment of the boundary of the sample, which is heated by the flash light. A crucial part for a reliable numerical model is the prior determination of the material parameters of the specimen as well as of the experimental parameters of the set-up. The material parameters in plane and in depth diffusivity are measured using laser line excitation. In addition, the absorption and heat transfer process of the first layers is investigated using an IR microscopic lens. The performance of the two distinct components of CFRP during heating – epoxy resin and carbon fibers – is examined. Finally, the material parameters are optimized by variation and comparison of the simulation results to the experimental data. The optimized parameters are compared to the measured ones and further methods to ensure precise material parameter measurements are discussed.
Shrinkage measurements of miniaturized low temperature co-fired ceramics (LTCC) samples under load typically lead to collapsing of the samples, which hampers the characterization of shrinkage up to full densification. In this paper, a measurement setup is presented, which allows for in situ shrinkage measurements of practical, large LTCC panels during pressure-assisted sintering in a sintering press. The shrinkage behavior of two commercial LTCC systems (GreenTape 951 and Ceramtape GC) has been measured under loads of up to 1 MPa. No crushing of the specimens was observed and reproducible characterization of shrinkage up to full densification has been performed. Based on comparisons to thermomechanical analyzer measurements in this and other studies, it was found that the in situ approach is much better suited for shrinkage characterization of LTCC under load.
Reproducibility and accuracy of the method are discussed and practical as well as more academic applications are proposed.
Structural relaxation phenomena in binary and multicomponent lithium silicate glasses were studied upon irradiation with femtosecond (fs) laser pulses (800 nm central wavelength, 130 fs pulse duration) and subsequent thermal annealing experiments. Depending on the annealing temperature, micro-Raman spectroscopy analyses evidenced different relaxation behaviours, associated to bridging and non-bridging oxygen structures present in the glass network. The results indicate that the mobility of lithium ions is an important factor during the glass modification with fs-laser pulses. Quantitative phase contrast imaging (spatial light interference microscopy) revealed that these fs-laser induced structural modifications are closely related to local changes in the refractive index of the material. The results establish a promising strategy for tailoring fs-laser sensitivity of glasses through structural mobility.
A combination of nanosized dielectric relaxation (BDS) and thermal spectroscopy (SHS) was utilized to characterize the dynamics of thin films of Poly(vinyl methyl ether) (PVME) (thicknesses: 7 nm – 160 nm). For the BDS measurements, a recently designed nano-structured electrode system is employed. A thin film is spin-coated on an ultra-flat highly conductive silicon wafer serving as the bottom electrode. As top electrode, a highly conductive wafer with non-conducting nanostructured SiO2 nano-spacers with heights of 35 nm or 70 nm is assembled on the bottom electrode. This procedure results in thin supported films with a free polymer/air interface. The BDS measurements show two relaxation processes, which are analyzed unambiguously for thicknesses smaller than 50 nm. The relaxation rates of both processes have different temperature dependencies. One process coincidences in its position and temperature dependence with the glassy dynamics of bulk PVME and is ascribed to the dynamic glass transition of a bulk-like layer in the middle of the film. The relaxation rates were found to be thickness independent as confirmed by SHS. Unexpectedly, the relaxation rates of the second process obey an Arrhenius-like temperature dependence. This process was not observed by SHS and was related to the constrained fluctuations in a layer, which is irreversibly adsorbed at the substrate with a heterogeneous structure. Its molecular fluctuations undergo a confinement effect resulting in the localization of the segmental dynamics. To our knowledge, this is the first report on the molecular dynamics of an adsorbed layer in thin films.
We present a first direct measurement of the temperature during milling combined with in situ Raman spectroscopy monitoring. The data reveal a low temperature increase due to the mechanical impact and clear temperature increases as a consequence of the reaction heat. Based on the data, temperature rises as postulated in the magma plasma and hot spot theory can be excluded for soft matter milling syntheses.
Statistical ethylene oxide (EO) and propylene oxide (PO) copolymers of different monomer compositions and different average molar masses additionally containing two kinds of end groups (FTD) were investigated by ultra high pressure liquid chromatography under critical conditions (UP-LCCC) combined with electrospray ionization time-of flight mass spectrometry (ESI-TOFMS).
Theoretical predictions of the existence of a critical adsorption point (CPA) for statistical copolymers with a given chemical and sequence distribution1 could be studied and confirmed. A fundamentally new approach to determine these critical conditions in a copolymer, alongside the inevitable chemical composition distribution (CCD), with mass spectrometric detection, is described. The shift of the critical eluent composition with the monomer composition of the polymers was determined. Due to the broad molar mass distribution (MMD) and the presumed existence of different end group functionalities as well as monomer sequence distribution (MSD), Gradient separation only by CCD was not possible. Therefore, isocratic separation conditions at the CPA of definite CCD fractions were developed. Although the various present distributions partly superimposed the separation process, the goal of separation by end group functionality was still achieved on the basis of the additional dimension of ESI-TOF-MS. The existence of HO-H besides the desired allylO-H end group functionalities was confirmed and their amount estimated. Furthermore, indications for a MSD were found by UPLC/MS/MS measurements. This approach offers for the first time the possibility to obtain a fingerprint of a broad distributed statistical copolymer including MMD, FTD, CCD, and MSD.
This article provides an impression on potentials in applying nowadays welding simulation tools in construction design. This is carried out exemplary on plate girders from two structural steel grades. The calculated residual stresses are compared with measurements by sectioning method. It has been repeatedly stated that present Eurocode models fail to approximate the residual stresses. Especially for high strength steel (HSS) only limited information is available on realistic occurring residual stresses in typical I-girders. The investigations are aimed to give further guidance on these values. A few proposals on advanced models are discussed.
A test campaign was launched to determine the mechanical properties of the High Luminosity-Large HadronCollider (HL-LHC) 11 T Nb3Sn magnet components. The results can be used to accurately represent the mechanical properties in finite elementmodels that predict the stress and strain distribution in these magnets. Particular attention is paid to anisotropic mechanical behavior of the different magnet materials. Static and dynamic test methods have been applied for determining elastic materials’ behavior, and highly accurate Young’s moduli are obtained with the nondestructive dynamic methods resonance and impulse excitation at ambient temperature and during in situ heat cycles.
Mittels Wärmebehandlung lassen sich die hervorragenden Eigenschaften von UHFB nochmals verbessern. Die für eine optimale Umsetzung relevanten Randbedingungen werden aktuell in der Fachwelt diskutiert. In dieser Veröffentlichung werden die Ergebnisse eines Forschungsprojekts vorgestellt, das die Wirkung verschiedener Einflussgrößen bei der Wärmebehandlung auf die Eigenschaften von UHFB zum Thema hatte. Dabei wurden die Art des Schutzes gegen das Austrocknen, die Vorlagerungszeit und die Haltezeit variiert. Um die zugrunde liegenden Prozesse zu verstehen, wurde der Phasenbestand mittels Röntgendiffraktometrie untersucht. Die höchsten Druckfestigkeiten des UHFB ließen sich bei einer Wärmebehandlung mit Wasserlagerung erzielen, da hierbei eine weitere Hydratation begünstigt wird. Vergleichsweise niedriger waren die Steigerungen bei einer Behandlung mit Schutz vor Austrocknung, während eine ungeschützte Behandlung zu deutlich geringeren Festigkeiten führte. Die Vorlagerungszeit beträgt im Idealfall einige Tage, um die Ausbildung eines offenbar günstigen Ausgangsgefüges sicherzustellen. Die Haltezeit sollte möglichst ausgedehnt sein, weil die Hydratation entsprechend lange gefördert wird. Im oberflächennahen Bereich war unter bestimmten Bedingungen eine Zonierung zu beobachten, deren Ursachen und Folgen, insbesondere in Bezug auf die Dauerhaftigkeit, weitere Forschung erfordern.
Polymers with intrinsic microporosity (PIMs) are of great interest in the field of gas separation membranes. Already the first synthesized PIM-1 shows extraordinary permeability and selectivity. Unfortunately, PIM-1 is susceptible to physical aging and thus gradually loses its outstanding properties. In this study a polyhedral oligomeric silsesquioxane with phenethyl substituents (PhenethylPOSS) was used as a nanofiller (0–40 wt%) in the PIM-1 matrix to potentially improve the gas transport properties and prevent physical aging. The molecular mobility of the solution-cast nanocomposite films was analyzed by Broadband Dielectric Spectroscopy (BDS). Furthermore, gas permeability was determined with the time lag method (0–20 bar upstream pressure) at 35 °C for N2, O2, CH4 and CO2.
Silica nanowires spanning 10 μm-deep trenches are fabricated from different types of silsesquioxane-based precursors by direct e-beam patterning on silicon followed by release through deep reactive ion etching. Nanowire aspect ratios as large as 150 are achieved with a critical dimension of about 50 nm and nearly rectangular cross-sections. In situ bending tests are carried out inside a scanning electron microscope, where the etch depth of 10 mm provides sufficient space for deformation. Silica NWs are indeed observed to exhibit superplastic behavior without fracture with deflections reaching the full etch depth, about two orders of magnitude larger than the nanowire thickness. A large-deformation elastic bending model is utilized for predicting the deviation from the elastic behavior. The results of forty different tests indicate a critical stress level of 0.1–0.4 GPa for the onset of plasticity. The study hints at the possibility of fabricating silica nanowires in a monolithic Fashion through direct e-beam patterning of silsesquioxane-based resins. The fabrication technology is compatible with semiconductor manufacturing and provides silica nanowires with a very good structural integrity.
The kinetics of the anodic dissolution of brass (CuZn42 and CuZn21Si3P) in synthetic tap water were investigated by atomic emission spectroelectrochemistry. Elemental Cu and Zn dissolution rates were measured in situ and in real time during galvanostatic dissolution. A complete mass/charge balance for the system yielded, as a function of applied current and a function of time, the quantity of Cu in the dezincification layer and the quantity of Cu and Zn in the oxide layer. In this way, a complete kinetic characterization of the fundamental chemical processes occurring during dezincification was realized for the first time. The oxide layer was composed primarily of Cu2O as indicated by grazing incidence XRD and Raman analysis. The soluble Cu oxidation product was determined to be Cu(II) by a mass/charge balance. Zn was oxidized to soluble Zn(II) leaving behind a trivial amount of solid Zn corrosion product on the surface. The kinetic analysis depicts a two-stage dissolution process of dezincification: a first stage of a rapid growth of the dezincified layer and a second stage where the growth of dezincified layer was much slower. The Cu2O layer grows continually during the exposure.
Polar semiconductor materials enable a variety of classic and quantum-light sources, which are optimized continuously. However, one key problem—the inherent electric crystal polarization of such materials—remains unsolved and deteriorates the radiative exciton decay rate. We suggest a sequence of reverse interfaces to compensate these polarization effects, while the polar, natural crystal growth direction is maintained. Former research approaches, like growth on less-polar crystal planes or even the stabilization of unnatural phases, never reached industrial maturity. In contrast, our concept provides a way for the development of ultrafast devices based on established growth processes for polar materials, while the electric potential landscape becomes adjustable.
Circumventing boundary effects while characterizing epoxy/copper interphases using nanoindentation
(2017)
Characterization of the size and mechanical properties of interphases is essential when designing multicomponent materials. When nanoindentation is used to investigate the size and mechanical properties of an interphase, a common challenge is that the indenter or the stress zone formed around it are often restricted by the reinforcement, making it difficult to distinguish the mechanical property variations caused by the interphase itself from those caused by the boundary effect. In this work, a testing system was developed that allows determining the indent affected zone and accounting for it in the interphase measurements of an epoxy/Cu system. Using finite element analysis, we confirmed the validity of the proposed system. Nanoindentation was used to investigate the Interphase between copper and two different epoxy systems; amine-cured and anhydride-cured. Nanoindentation results showed that a copper layer that is only 10 nm thick still exhibits a constriction effect on the indentations in its vicinity. The amine-cured epoxy did not show any sign of interphase existence using the introduced method. However,
a soft interphase with a thickness of ~1.7 μm was measured on theanhydride-cured epoxy. Furthermore, we show that the proposed system can be used to determine the interphase thickness as well as its relative mechanical properties regardless of the indentation depth.
This system can be further used for investigating other polymer/metal interphases to better understand the factors influencing them, thus helping engineer the interphase size and properties to enhance composite performance.
Non-isothermal heating rate kinetics was applied to two epoxy resin systems. In situ near-infrared (NIR) measurements were taken with a heatable NIR cell which allowed the cure to be monitored by characteristic absorption bands. An autocatalyzed reaction of the nth order was shown to describe the epoxy conversion curves. Differential Scanning Calorimetry (DSC) was used as a complementary method. The kinetic models developed by both NIR and DSC are in good accordance with experimental epoxy conversion in the in situ NIR setup for single and multiple cure temperature ramps.
A linear calibration curve of the characteristic absorption bands of epoxy normalized to aromatic vibrations was introduced. The curing degree of structural epoxies that were cured according to an industrial temperature cure profile was determined by NIR using the calibration curve. The epoxy conversions of the structural components showed good agreement with the experimental in situ NIR. Several degrees of cure for structural specimens were evaluated by NIR and residual reaction enthalpy by DSC. We present the non-destructive NIR spectroscopy as an alternative to determine fast and non-destructive epoxy conversion, particularly suitable for high degrees of cure on structural components.
3D imaging techniques are very fashionable nowadays, and allow enormous progress in understanding ceramic microstructure, its evolution, and its link to mechanical, thermal, and transport properties. In this feature article, we report the use of a powerful, yet not so wide-spread, set of X-ray techniques based on refraction effects. X-ray refraction allows determining internal specific surface (surface per unit volume) in a non-destructive fashion, position and orientation sensitive, and with a nanometric detectability. While the techniques are limited by the X-ray absorption of the material under investigation, we demonstrate showcases of ceramics and composite materials, where understanding of process parameter influence or simply of microstructural parameters could be achieved in a way unrivalled even by high-resolution techniques such as electron microscopy or computed tomography.
The effectiveness of distinct fillers, from micro to nano-size scaled, on the fire behaviour of an epoxy resin and its carbon fibre reinforced composites was assessed by cone calorimetry. The performance was compared not only regarding the reaction to fire performance, but also in terms of thermal stability, glass transition temperature and microstructure. Regarding the fire reaction behaviour of nanofilled epoxy resin, anionic nanoclays and thermally oxidized carbon nanotubes showed the best results, in agreement with more compact chars formed on the surface of the burning polymer. For carbon fibre reinforced composite plates, the cone calorimeter results of modified resin samples did not show significant improvements on the heat release rate curves. Poorly dispersed fillers in the resin additionally caused reductions on the glass transition temperature of the composite materials.
In order to study the temporally distributed energy deposition in the formation of laser-induced periodic surface structures (LIPSS) on single-crystalline zinc oxide (ZnO), two-colour double-fs-pulse experiments were performed. Parallel or cross-polarised double-pulse sequences at 400 and 800 nm wavelength were generated by a Mach–Zehnder interferometer, exhibiting inter-pulse delays up to a few picoseconds between the sub-ablation 50-fs-pulses. Twenty two-colour double-pulse sequences were collinearly focused by a spherical mirror to the sample surface. The resulting LIPSS periods and areas were analysed by scanning electron microscopy. The delay-dependence of these LIPSS characteristics shows a dissimilar behaviour when compared to the semiconductor silicon, the dielectric fused silica, or the metal titanium. A wavelength-dependent plasmonic mechanism is proposed to explain the delay-dependence of the LIPSS on ZnO when considering multi-photon excitation processes. Our results support the involvement of nonlinear processes for temporally overlapping pulses. These experiments extend previous two-colour studies on the indirect semiconductor silicon towards the direct wide band-gap semiconductor ZnO and further manifest the relevance of the ultrafast energy deposition for LIPSS formation.