Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Posterpräsentation (805) (entfernen)
Sprache
- Englisch (670)
- Deutsch (134)
- Französisch (1)
Schlagworte
- Corrosion (36)
- Additive manufacturing (30)
- Mechanochemistry (24)
- Additive Manufacturing (20)
- Glass (20)
- Nanoparticles (19)
- Crystallization (17)
- Fluorescence (15)
- Degradation (14)
- In situ (14)
- Computed tomography (13)
- Residual stress (13)
- Korrosion (12)
- Biofilm (11)
- Hydrogen (11)
- Laser-induced periodic surface structures (LIPSS) (11)
- Microstructure (11)
- SAXS (11)
- Catalysis (10)
- Methanogens (10)
- Nanoparticle (10)
- Sintering (10)
- Thermography (10)
- X-ray refraction (10)
- Boehmite (9)
- Computed Tomography (9)
- Stainless steel (9)
- AFM (8)
- Cocrystal (8)
- KorroPad (8)
- Laser powder bed fusion (8)
- Quality assurance (8)
- ToF-SIMS (8)
- Corrosion resistance (7)
- EPR (7)
- Electron microscopy (7)
- Heat treatment (7)
- Nichtrostender Stahl (7)
- PE-HD (7)
- SEM (7)
- Selective laser melting (7)
- Synthesis (7)
- 316L (6)
- Amorphous phases (6)
- Automation (6)
- Creep (6)
- DNA (6)
- Dosimetry (6)
- Femtosecond laser ablation (6)
- Geant4 (6)
- Heterogeneous catalysis (6)
- MIC (6)
- MOFs (6)
- Microdosimetry (6)
- Neutron diffraction (6)
- Oxidation (6)
- Phosphates (6)
- Polymer (6)
- Polymorphism (6)
- Prüfmethode (6)
- Qualitätssicherung (6)
- Simulation (6)
- Welding (6)
- Additive Fertigung (5)
- Aluminium (5)
- Archaea (5)
- C-F bond activation (5)
- Coarsening (5)
- DFT (5)
- Dielectric spectroscopy (5)
- Duplexstahl (5)
- Dye (5)
- FTIR (5)
- Gefahrgut (5)
- Gefahrstoff (5)
- Graphene (5)
- Imaging (5)
- LEE (5)
- Laser Powder Bed Fusion (5)
- Microplastic (5)
- Microplastics (5)
- Milling (5)
- Nanocomposite (5)
- Nanocomposites (5)
- Niobium carbide (NbC) (5)
- PBF-LB/M (5)
- Polymorph (5)
- Quantum dot (5)
- Radiation damage (5)
- Reference material (5)
- Self-healing (5)
- Silver nanoparticles (5)
- Struvite (5)
- ThermoCalc (5)
- Thin films (5)
- Transition metal (5)
- Transmission electron microscopy (5)
- UHPC (5)
- Wear (5)
- XANES (5)
- Ageing (4)
- AlSi10Mg (4)
- AuNP (4)
- Bioactive (4)
- Composite-Druckgefäße (4)
- Concrete (4)
- Corrosion testing (4)
- Crack growth (4)
- DCB (4)
- DNA damage (4)
- Diesel (4)
- Digitalisierung (4)
- Discotic Liquid Crystals (4)
- Energy deposit (4)
- FAIR (4)
- Fatigue (4)
- Flexible crystals (4)
- Friction (4)
- Geant4-DNA (4)
- Hardness (4)
- Hydrogen assisted cracking (4)
- Implants (4)
- Inconel 686 (4)
- Iron oxide nanoparticles (4)
- LIBS (4)
- Laser Beam Melting (4)
- Laser profilometry (4)
- Low energy electrons (4)
- MCS (4)
- Metal phosphonates (4)
- Monte-Carlo simulation (4)
- NMR (4)
- Nano (4)
- Nanoconfinement (4)
- Nanoplastic (4)
- Pitting corrosion (4)
- Polyethylene (4)
- Polymers (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- Ringversuch (4)
- Spectroscopic ellipsometry (4)
- Steel (4)
- Sulfidation (4)
- Surface chemistry (4)
- Synchrotron (4)
- TEM (4)
- TiO2 (4)
- Tribology (4)
- Upconversion (4)
- Validierung (4)
- X-ray diffraction (4)
- XPS (4)
- XRD (4)
- 3D High-temperature shape screening (3)
- AM (3)
- Ab-initio (3)
- Alloy 2618A (3)
- Assay (3)
- Bending modulus (3)
- Beta decay (3)
- Biodiesel (3)
- Bitumen (3)
- Bonding analysis (3)
- Brachytherapy (3)
- Cancer treatment (3)
- Carbon nanotubes (3)
- Cermets (3)
- Clustered nanoparticles (3)
- Coating (3)
- Computational Chemistry (3)
- Conductivity (3)
- Corundum grinding (3)
- Dangerous goods (3)
- Database (3)
- Diffusion coefficient (3)
- EBSD (3)
- Ellipsometry (3)
- Environmental Simulation (3)
- Epoxy (3)
- FIB (3)
- Flourescence (3)
- Flow cytometry (3)
- Glass ceramic (3)
- Glass composition (3)
- Gold Nanoparticles (3)
- In situ monitoring (3)
- Korrosionsbeständigkeit (3)
- Korundschleifen (3)
- LCF (3)
- Laser cladding (3)
- Laser implantation (3)
- Livermore model (3)
- Luminescence (3)
- MIPs (3)
- Machine Learning (3)
- Machine learning (3)
- Martensitic stainless steels (3)
- Materials Informatics (3)
- Mesoporosity (3)
- Metallographie (3)
- Metrology (3)
- Microbial induced corrosion (3)
- Microbiologically influenced corrosion (3)
- Micropatterning (3)
- Microscopy (3)
- Molecularly imprinted polymers (3)
- Monitoring (3)
- NDT (3)
- NP (3)
- NTE (3)
- Nanofibers (3)
- Nanomaterial (3)
- Nichtrostende Stähle (3)
- OECD (3)
- OER (3)
- OH radical (3)
- Oberflächenbearbeitung (3)
- Optical spectroscopy (3)
- Orientation (3)
- Oxygen Reduction Reaction (3)
- PGM-free catalyst (3)
- PXRD (3)
- Penelope model (3)
- Phase grating (3)
- Polydopamine (3)
- Polymer 3R (3)
- Polymer blends (3)
- Polypropylene (3)
- ProMoAM (3)
- Quantum dots (3)
- REACH (3)
- Radiation therapy (3)
- Radiolysis (3)
- Raman Spectroscopy (3)
- Reactive extrusion (3)
- Reference data (3)
- Residual Stress (3)
- Rigidity (3)
- Röntgenrefraktion (3)
- SLM (3)
- Sample preparation (3)
- Schadensanalyse (3)
- Schweißen (3)
- Sensibilisierung (3)
- Sialic acid (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- Specific heat spectroscopy (3)
- Strahlen (3)
- Surface analysis (3)
- Synchrotron tomography (3)
- TDEP (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermoelectrics (3)
- Thin Films (3)
- Thin polymeric films (3)
- Ti-6Al-4V (3)
- Two-photon polymerisation (3)
- VSSA (3)
- Vickers (3)
- WAXS (3)
- Waveguide (3)
- Wärmebehandlung (3)
- X-ray fluorescence (3)
- ZCF (3)
- ZrF4 (3)
- particle scattering (3)
- 3D (2)
- 3D printing (2)
- AGIL (2)
- AIS (2)
- ATR (2)
- Absorption edge tomography (2)
- Adaptives Schweißen (2)
- Adsorbed Layer (2)
- Aktivkohle (2)
- Alkali-silica-reaction (2)
- Alterung von Pyrotechnik (2)
- Aluminium alloys (2)
- Aluminum (2)
- Antimicrobials (2)
- Atomic packing factor (2)
- Atomization (2)
- Austenitic stainless steel (2)
- Automatisierung (2)
- BAMline (2)
- Bacteria (2)
- Bacterial adhesion (2)
- Barcoding (2)
- Bead (2)
- Bildanalyse (2)
- Bildgebung (2)
- Broadband dielectric spectroscopy (2)
- Building Materials (2)
- Building materials (2)
- CALPHAD (2)
- CCMat (2)
- CCS (2)
- CLP (2)
- Calcium cobaltite (2)
- Carbon capture (2)
- Carbon dioxide (2)
- Catalysts (2)
- Characterization (2)
- Chemical composition (2)
- Chemically Complex Materials (2)
- Composite (2)
- Composites (2)
- Computertomographie (2)
- Confocal (2)
- Core-shell (2)
- Correlative imaging (2)
- Corrosion Testing (2)
- Corrosion inhibition (2)
- Crack (2)
- Crack Propagation (2)
- Crack growth velocity (2)
- Crack healing (2)
- Crack intensity factor (2)
- Creep-resistant steel (2)
- Crystal orientation (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Damage (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Data fusion (2)
- Dental materials (2)
- Deuterium (2)
- Digitalization (2)
- Double cantilever beam (2)
- Durability (2)
- ECHA (2)
- EDX (2)
- ESEM (2)
- Eigenspannungen (2)
- Einstufung (2)
- Electrocatalysis (2)
- Electrochemistry (2)
- Electron beam induced modification (2)
- Elemental composition (2)
- Emission (2)
- Emission test chamber (2)
- Encoding (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Exchange interaction (2)
- Explosionsschutz (2)
- Explosivstoffe (2)
- FEM (2)
- Faseroptik (2)
- FeNi-Oxide NPs (2)
- Ferromagnetism (2)
- Finite element method (2)
- Fire (2)
- Friction and wear (2)
- Fused Filament Fabrication (2)
- GD-OES (2)
- GMR (2)
- GMR-Sensorik (2)
- Gas-Staub-Gemische (2)
- Gel-type electrolytes (2)
- Geothermal (2)
- Glas (2)
- Gold nanocluster (2)
- Gold nanoparticles (2)
- Graphene oxide flakes (2)
- Green chemistry (2)
- Grüneisen parameter (2)
- Hazardous substances (2)
- Henry's constant (2)
- High Pressure (2)
- High temperature corrosion (2)
- High-temperature corrosion (2)
- Hot stamping (2)
- Hybride Gemische (2)
- Hydrogen permeability (2)
- Hydrogen storage (2)
- IUCLID (2)
- Image analysis (2)
- Image processing (2)
- Imaging techniques (2)
- In situ heating (2)
- In-situ (2)
- InP (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- Interatomic potentials (2)
- Ionic Liquid crystals (2)
- Iron (2)
- L-PBF (2)
- LLG (2)
- LMD (2)
- LTCC (2)
- Landau Lifshitz equation (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser metal deposition (2)
- Least-squares adjustment (2)
- Lichtbogensensorik (2)
- Lifetime (2)
- Lithium Ion Batteries (2)
- Load transfer (2)
- Low Cycle Fatigue (2)
- MMC (2)
- MOF (2)
- MSG-Engspaltschweißen (2)
- Macrophages (2)
- Magnesium alloy (2)
- Magnetic moment (2)
- Magnetic nanoparticles (2)
- Materialcharakterisierung (2)
- Metadata schema (2)
- Metal Matrix Composite (2)
- Metal matrix composite (2)
- Metal organic frameworks (2)
- Metals (2)
- Method (2)
- Micromagnetism (2)
- Microwave synthesis (2)
- Mikrobiell induzierte Korrosion (2)
- Modellierung (2)
- Multielectrode array sensors (2)
- Multiplexing (2)
- NFDI (2)
- NIR (2)
- Nanomechanics (2)
- Nanosensor (2)
- Neutron (2)
- Neutron Diffraction (2)
- Non-classical crystallization (2)
- Normung (2)
- Numerical modeling (2)
- OOMMF (2)
- Oberflächenenergie (2)
- Object oriented micromagnetic framework (2)
- Online Process Monitoring (2)
- Ontologie (2)
- Ontology (2)
- Optics (2)
- Oxidglas (2)
- Particle (2)
- Phonons (2)
- Photocatalysis (2)
- Plastic (2)
- Plattform MaterialDigital (2)
- Polycarbonate (2)
- Polymer bilayer coatings (2)
- Porosity (2)
- Position detection (2)
- Powder Bed Fusion (2)
- Precipitation (2)
- Process Monitoring (2)
- Protein (2)
- Proteins (2)
- Prozessüberwachung (2)
- Pyrotechnik (2)
- QHA (2)
- QY (2)
- Quantum yield (2)
- Quecksilberporosimetrie (2)
- REM (2)
- Radiotherapy (2)
- Raman (2)
- Referenzdaten (2)
- Reflectography (2)
- Resistance (2)
- Resonance frequency (2)
- Robotische Glasschmelzanlage (2)
- Roughness (2)
- SCNC (2)
- SEM/EDS (2)
- SIMS (2)
- SWIR (2)
- Scanning electrochemical microscope (SECM) (2)
- Selected Laser Melting (2)
- Semantic Interoperability (2)
- Semantic Web Technologies (2)
- Semiconductor (2)
- Sicherheitstechnische Kenngrößen (2)
- Silica (2)
- Single molecule (2)
- Single particle spectroscopy (2)
- Small-angle scattering (2)
- SnO2 (2)
- Stainless steels (2)
- Stickstoff (2)
- Stochastic Landau Lifshitz Gilbert equation (2)
- Structural Health Monitoring (2)
- Surface (2)
- Surface functionalization (2)
- Surface integrity (2)
- Surface modification (2)
- Synchrotron X-Ray Refraction (2)
- Synchrotron X-ray computed tomography (2)
- Syngle Crystal alloy (2)
- TED-GC/MS (2)
- Temperature (2)
- Thermally induced porosity (2)
- Thermodynamik (2)
- Thermoelectric materials (2)
- Thermografie (2)
- Thermogravimetrie (2)
- Thin film metrology (2)
- Titanium (2)
- Tool wear (2)
- Topotactic transformation (2)
- Traceability (2)
- Transition metals (2)
- Tungsten carbide (WC) (2)
- Ultra-Thin films (2)
- Ultrashort laser processing (2)
- Ultrasonic-assisted milling (2)
- Ultrasound (2)
- VOC (2)
- Verbundfestigkeit (2)
- Vessels (2)
- Wasserstoff (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- Wood (2)
- X-ray computed tomography (2)
- XRF (2)
- Zeolitic imidazolate framework (2)
- ZfP (2)
- Zinc coatings (2)
- Zustandsüberwachung (2)
- beta particle (2)
- cylinders (2)
- 18HLT01 MetVes II (1)
- 29Si-27Al TRAPDOR MAS (1)
- 316L Stainless Steel (1)
- 3D High-temperatue shape screening (1)
- 3D analysis (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D imaging (1)
- 3D tomography (1)
- 3D-Formerkennung (1)
- 5-hydroxynicotinic acid (1)
- 5G (1)
- ACCORDs (1)
- AFM-IR (1)
- AISI 304L (1)
- ALD (atomic layer deposited) (1)
- ALD-Beschichtung (1)
- ALD-Hybridprozesse (1)
- AM IN718 (1)
- ASAXS (1)
- ASR (1)
- ATH (1)
- ATRP (1)
- Abkühlgeschwindigkeit (1)
- Absolute flourometry (1)
- Absorption edge (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acrylamide based polymers (1)
- Active pharmaceutical ingredient (API) (1)
- Additiv gefertigter Stahl (1)
- Additive Manufacture (1)
- Additive Fertigung (AM) (1)
- Additive surface treatment (1)
- Aditive Manufacturing (1)
- Admixtures (1)
- Adsorbed layer (1)
- Advanced manufacturing (1)
- Advanced materials (1)
- Advanced nanomaterials (1)
- Aerial Robot (1)
- Aerosole (1)
- Affinity chromatography (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag2S (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging (1)
- Aging mechanisms (1)
- Air Void System (1)
- Air exchange rate (1)
- Al alloy (1)
- Al-Cu-Li alloys (1)
- Al2O3 (1)
- Al2O3 thin films (1)
- Al2O3-Schichten (1)
- AlSi10Mg alloy (1)
- Albumin (1)
- Alcali activated binders (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkalialumosilicatsysteme (1)
- Alkaline earth metal (1)
- Aln (1)
- Altglasfragmente (1)
- Altpapierrecycling (1)
- Alumina (1)
- Aluminium Alloy (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Ammoniumnitrat (1)
- Amorphous silica particles (1)
- Amphiphilicity (1)
- Amplification (1)
- Anaerob (1)
- Analyser-based imaging (1)
- Analytical solution (1)
- Anisotropy (1)
- Anlage (1)
- Annealing study (1)
- Anodic Aluminum Oxide (1)
- Anodization (1)
- Antibiotics (1)
- Antibodies (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Artefact (1)
- Artificial digestion (1)
- Asphaltene content (1)
- Assays (1)
- Atmospheric Corrosion (1)
- Atmospheric Plasma Spraying (1)
- Atomic Force Microscopy (1)
- Atomic Layer Deposition (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Ausbildung (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Automatisation (1)
- BADGER film (1)
- BBR (1)
- BCS (1)
- BLE (1)
- BODIPY (1)
- BSA (1)
- BTS (1)
- Bacterial growth (1)
- BadgerFilm (1)
- Baudenkmal (1)
- Baustahl (1)
- Baustoffe (1)
- Bauzustandsanalyse (1)
- Benannte Stelle (1)
- Bench braking sequence (1)
- Beratung Behörden/Ministerien (1)
- Beschichtung (1)
- Beta particle (1)
- Beton (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Betonschallplatte (1)
- Betonschäden (1)
- Bewitterung (1)
- Bexarotene (1)
- Bildverarbeitung (1)
- Bio Ceramics (1)
- Bio-SAXS (1)
- Bio-receptive (1)
- BioSAXS (1)
- Bioactive glass (1)
- Biocide (1)
- Biocides (1)
- Biocomposite (1)
- Biocorrosion (1)
- Biofilm cultivation (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilms (1)
- Bioimaging (1)
- Biomasseverbrennung (1)
- Biomimetics (1)
- Bioreceptivity (1)
- Bioresorbable (1)
- Biosensor (1)
- Blast injury (1)
- Bluetooth Low Energy (1)
- Boehmite alumina (1)
- Bonding Analysis (1)
- Bovine serum albumin (1)
- Bragg-edge (1)
- Brazing (1)
- Bremsbeläge (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Bronze (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Build Angle (1)
- Building products (1)
- Bulk diffusion (1)
- Bulk material (1)
- Bulk properties ageing (1)
- Burst pressure (1)
- Burst test (1)
- C-C coupling (1)
- CALPHAD databases analysis (1)
- CCUS (1)
- CEO (1)
- CERN (1)
- CFD (1)
- CMAS (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CMSX4 (1)
- CO2-Korrosion (1)
- CONSENS (1)
- CUSP (1)
- Calcium sulfoaluminate cement (1)
- Calculation (1)
- Camera (1)
- Camera calibration (1)
- Capsules (1)
- Carbide (1)
- Carbon (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon nanomembranes (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (1)
- CdSe (1)
- Cearmics (1)
- Cell imaging (1)
- Cement (1)
- Cement hydration (1)
- Ceramic (1)
- Ceramic spring (1)
- Ceramic-ceramc joints (1)
- Ceramics (1)
- Cermet (1)
- Certification (1)
- Certified reference material (1)
- Certified standards (1)
- Charakterisierung (1)
- Chemical Bonds (1)
- Chemical analyses (1)
- Chemical compositions (1)
- Chemically Complex Alloy (1)
- Cheminformatics (1)
- Chloride (1)
- Chromatography (HIC) (1)
- Chromium (1)
- Chromium (III) complexes (1)
- Chromium oxide (1)
- Chromstahl (1)
- Climate chamber simulation (1)
- Co-axial monitoring (1)
- CoCrMo (1)
- Coatings (1)
- Coda Wave Interferometry (1)
- Coherent Rayleigh OTDR (1)
- Cold Spray (1)
- Column chromatography (1)
- Columnar crystal growth (1)
- Columnar liquid crystals (1)
- Compatible solute (1)
- Complex concentrated alloy (CCA) (1)
- Component test (1)
- Composite cylinder (1)
- Composition (1)
- Compound (1)
- Compression (1)
- Compsite tapes (1)
- Configurational entropy (1)
- Confined Columnar Liquid Crystals (1)
- Confocal fluorescence microscopy (1)
- Conservation (1)
- Construction products (1)
- Consumer articles (1)
- Contact resonance (1)
- Conventional testing (1)
- Convolutional neural networks (1)
- Coordination polymer (1)
- Core-shell architecture (1)
- Core/shell materials (1)
- Corosion (1)
- Corrosion behaviour (1)
- Corrosion investigations (1)
- Corrosion loss (1)
- Corrosion product layer (1)
- Corrosion products (1)
- Corrosion protecting system (1)
- Cosolute (1)
- Crack evolution (1)
- Crack propagation (1)
- Crack propagation analysis (1)
- Cracks (1)
- Creep-resistant Steel (1)
- Crush (1)
- Cryo-TEM (1)
- Crystal Engineering (1)
- Crystal plasticity (1)
- Crystal structure (1)
- Crystalline structure (1)
- Curing Monitoring (1)
- Curvelet Transform (1)
- Cutting material (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-L (1)
- DIC assisted compression (1)
- DIN 52186 (1)
- DIN EN 252 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DRIFTS (1)
- DSR (1)
- Damage Analysis (1)
- Damage mechanism (1)
- Damage repair (1)
- Dangerous goods packaging (1)
- Dangerous goods packagings (1)
- Dark-field transmission electron microscopy (1)
- Data (1)
- Data Fusion (1)
- Data Integration (1)
- Data Interoperability (1)
- Data Science (1)
- Data analysis (1)
- Databases (1)
- Datenanalyse (1)
- Datenträger (1)
- Deep Learning (1)
- Defect detection (1)
- Defects (1)
- Deformation (1)
- Deformation-Induced Martensite (1)
- Deformationen (1)
- Degradation of Mechanical Properties (1)
- Degree of damage (1)
- Degree of purity (1)
- Delamination (1)
- Demonstrators (1)
- Dendrimersomes (1)
- Dendritic amphiphiles (1)
- Density (1)
- Density Functional Theory (1)
- Dental material (1)
- Depth-profiling (1)
- Design Fire (1)
- Destabilization (1)
- Detection (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusion (1)
- Diffusion Coefficient (1)
- Diffusion barrier (1)
- Digital material representation (1)
- Digital twin (1)
- Digitaler Zwilling (1)
- Digtial Representation (1)
- Diopside (1)
- Direct fluorine-metal bond (1)
- Direct laser writing (1)
- Discotic Liquid Crystal (1)
- Discotic liquid crystals (1)
- Dislocations (1)
- Distortion (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed vibration sensing (1)
- Distribution during filling (1)
- Disäuren (1)
- Doping study (1)
- Downstream processing (1)
- Dredging mud (1)
- Drop test (1)
- Druckwelle (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dust analysis (1)
- Dynamic light scattering (1)
- Dynamics (1)
- EBSD analysis (1)
- EC4SafeNano (1)
- EDS (1)
- EDX Analysis (1)
- EDXRD (1)
- EMN (1)
- EMPIR project (1)
- EPMA (1)
- ESI-TOF-MS (1)
- EU H2020 project (1)
- Ectoin (1)
- Ectoine (1)
- Eddy Current (1)
- Edelstahl (1)
- Eigenspannung (1)
- Eindringmodul (1)
- Einkristalllegierung (1)
- Einzelfaserdurchzugsversuch (1)
- Eisen (1)
- Elastomer (1)
- Elastomers (1)
- Electro catalyst (1)
- Electrochemical noise (1)
- Electrodeposited Ni - coatings (1)
- Electrolysis (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron beam (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (EPMA) (1)
- Electronic Lab Notebook (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Ellipsometric metrology (1)
- Emission chamber testing (1)
- Emissivity (1)
- Energetic materials (1)
- Energietechnik (1)
- Energy (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Engineered Nanomaterials (1)
- Environment (1)
- Epox (1)
- Epoxy nanocomposite (1)
- Er(III) (1)
- Erneuerbare Energien (1)
- Erosion (1)
- European Metrology Network (1)
- European standard (1)
- Exciton diffusion (1)
- Experimental study (1)
- Explosives (1)
- Extracellular polymeric substances (1)
- Extracellular vesicles (EV) (1)
- Extrusion (1)
- FE (1)
- FIB/SEM (1)
- FNCT (1)
- FTIR spectroscopy (1)
- Fachwerkträger (1)
- Fallhammer (1)
- Far-infrared spectroscopy (1)
- Farbätzen (1)
- Fasermodifikation (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Façade (1)
- Fe-Cr alloys (1)
- Fe-Ni (1)
- Fe2TiO5 (1)
- FeCr- alloys (1)
- FeNi (1)
- FeNi thin film (1)
- FeSnOx (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferroelektret (1)
- Fiber (1)
- Fiber reinforced dental post (1)
- Fiber sensors (1)
- Fiber-optic microarray (1)
- Fiberglass composite (1)
- Film depositition (1)
- Film thickness determination (1)
- Finite Element Method (1)
- Finite Element Modelling (1)
- Fire Retardant (1)
- Flow Cell (1)
- Flow-System (1)
- Fluorescence quenching (1)
- Fluorescence spectroscopy (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Fluoride (1)
- Fluorides (1)
- Fluorine Interaction (1)
- Flüssigmetallversprödung (1)
- Foam tiles (1)
- Focussed ion beam (1)
- Focussed ion beam growth (1)
- Force distance curves (1)
- Formaldehyde (1)
- Foundation (1)
- Fractional factorial (1)
- Fractography (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Fraktografie (1)
- Fraktographie (1)
- Fre (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fullerene (1)
- Functional group detection (1)
- Functionality type distribution (1)
- Funktionelle Beschichtungen (1)
- Funtional Groups (1)
- Füllgradregelung (1)
- G5P (1)
- GEXRF (1)
- GUM-compliance (1)
- GVP (1)
- Gamma-Co60 radiation (1)
- Gamma-irradiation (1)
- Gas Sorption (1)
- Gas Tomography (1)
- Gas solubility (1)
- Gas turbine (1)
- Gefüge (1)
- Gel electrolytes (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Generator (1)
- Geopolymer (1)
- Geopolymers (1)
- Geothermal energy (1)
- Geothermie (1)
- Ggraphene polymer nanocomposite (1)
- GlasDigital (1)
- Glasanalyse (1)
- Glasig-kristalline Sinterwerkstoffe (1)
- Glaskeramik (1)
- Glass paints (1)
- Glass transformation temperature (1)
- Glass transition (1)
- Glass-ceramic (1)
- Glasstruktur (1)
- Gleeble (1)
- Gleitlinien (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycerin (1)
- Gold (1)
- Gold Nanoparticle (1)
- Gold mosaics (1)
- Grain boundary corrosion (1)
- Graphene /-oxide (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Graphene-related 2D materials (1)
- Grazing exit (1)
- Grenzflächenaktive Verbindung (1)
- Grey cast iron machining (1)
- Growth Kinetics (1)
- Guanidine receptor (1)
- Guideline (1)
- HDPE Sorption (1)
- HF (1)
- HR-CS-AAS (1)
- HV cable accessories (1)
- HV-Insulation (1)
- Haftfestigkeit (1)
- Haftvermittler (1)
- Halbleiterphysik (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Harmonisation in microplastics (1)
- Harsh environments (1)
- Hatch length (1)
- Hauptkomponentenanalyse (1)
- Hazmat (1)
- Heat Treatment (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heißzug (1)
- Helium- und Wasserstoffpermeation (1)
- Heterogene plastische Deformation (1)
- Hexafluorobenzen (1)
- HfO2 (1)
- High Cycle Fatigue (1)
- High Molecular Polyethylene (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High resolution ultrasonic testing (1)
- High temperature (1)
- High temperature corrosion resistance (1)
- High voltage cable accessories (1)
- High-Performance Concrete (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-strength steels (1)
- High-temperature stability (1)
- Historic buildings (1)
- Hochfester Feinkornbaustahl (1)
- Hochtemperaturanwendungen (1)
- Hollow specimen (1)
- Holz (1)
- Holzbaustoff (1)
- Holzprüfung (1)
- Homemade explosives (1)
- Honeycomb structure (1)
- Horizontaldilatometer (1)
- Human plasma (1)
- Humidity (1)
- Hybrid build-up (1)
- Hybrid inorganic/organic copolymers (1)
- Hydration (1)
- Hydrogen diffusion (1)
- Hydrogen permeation (1)
- Hydrophobic interaction (1)
- Hydrothermal treatment (1)
- Hydroxyectoine (1)
- Härtevergleichsplatten (1)
- Härteverlauf Schweißnaht (1)
- ILC (1)
- IN 625 (1)
- IN 718 (1)
- IN718 (1)
- IR (1)
- IR spectroscopy (1)
- ISO 5725 (1)
- Illumina (1)
- ImAFM (1)
- Image Denoising (1)
- Image segmentation (1)
- Immersion tank testing (1)
- Impact excitation (1)
- Impact strength (1)
- Implant-Test (1)
- In situ Raman (1)
- In situ XRD (1)
- In situ analysis (1)
- In situ diffraction (1)
- In situ measurement (1)
- In situ measurement, (1)
- In situ tensile test (1)
- In situ testing (1)
- In-Situ (1)
- In-Situ Characterization (1)
- In-situ Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ heating up to 1400°C (1)
- In-situ loading (1)
- In-situ monitoring (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 718 (1)
- Indoor air (1)
- Industrieabwasseraufbereitung (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Initial hydration (1)
- Innovative Messtechnik (1)
- Inorganic polymers (1)
- Instrumented indentation testing (1)
- Instrumentierte Eindringprüfung (1)
- Integrated analysis (1)
- Interface (1)
- Interim storage (1)
- Interlaboratory comparison (1)
- Intermediate (1)
- Internal friction (1)
- Internal oxidation (1)
- Interoperability (1)
- Interpenetrating polymer network (1)
- Interpenetrating polymer networks (1)
- Interphase (1)
- Invasive Arten (1)
- Inverse Analysis (1)
- Inverse analysis (1)
- Inverse problem (1)
- Ionic liquids (1)
- Ionizing radiation damage (1)
- Iridium oxide films (1)
- Iridium-titanium mixed oxides (1)
- Iron aluminides (1)
- Iron oxide (1)
- Isotope analysis (1)
- JNP AdvManuNet (1)
- Kalottenverfahren (1)
- Kaltrissprüfung (1)
- Kavitation (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Keramik (1)
- Kiefernholz (1)
- Kieselsäure (1)
- Klebfestigkeit (1)
- Kleidermotte (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Knowledge Readiness Level (1)
- Knowledge Representation (1)
- Knowledge graph and ontologies (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konformitötsbewertung (1)
- Kontrastierung (1)
- Korrosionsabtrag (1)
- Kraftabhängige Funktion (1)
- Kristallplastizität (1)
- Künstliche neuronale Netze (1)
- L-PBF 316L (1)
- LBM (1)
- LIBS TIG welding (1)
- LIPSS (1)
- LPBF (1)
- LPSO (1)
- LTCC multilayer (1)
- Laboratory Container (1)
- Laboratory method (1)
- Laborvergleich Härte (1)
- Lanthanide(III) (1)
- Large scale test (1)
- Large-scale production (1)
- Large-scale synthesis (1)
- Large-scale test (1)
- Laser Cladding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser cludding (1)
- Laser dispersing (1)
- Laser structuring (1)
- Laser-Pulverbettschweißen (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strcutures, LIPSS (1)
- Laserthermografie (1)
- Lasertriangulationssensor (1)
- Latex (1)
- Lattice structure (1)
- Layer-by-layer deposition (1)
- Leaching process (1)
- Least-Squares Adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lichtmikroskopie (1)
- Ligand (1)
- Ligands (1)
- Lightweight structures (1)
- Lignin (1)
- Lignosulfonate (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Lithium batteries (1)
- Lithium-ion batteries (1)
- Lizard (1)
- Load Partition (1)
- Load history (1)
- Loading factor (1)
- Localized corrosion (1)
- Lokale Korrosion (1)
- Long-term monitoring (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- Luftultraschall (1)
- Luminescence lifetime measurments (1)
- Luminescent materials (1)
- MIC projekt (1)
- MID IR Spectroscopy (1)
- ML (1)
- MNP production technique (1)
- Machine-Learning Segmentation (1)
- Magic-sized cluster (1)
- Magnesium (1)
- Magnetic nano-particles (1)
- Magnetic stray fields (1)
- Magnetostrictive actuator layer (1)
- Magnetostrictive layer (1)
- Magnetron sputtering (1)
- Manganese oxide (1)
- Maritime atmosphere (1)
- Martensitische nichtrostende Stähle (1)
- Maschinennachgiebigkeit (1)
- Material characterization (1)
- Material degradation (1)
- Material design (1)
- Material model (1)
- Material oxidation (1)
- Material selection (1)
- McSAS3 (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical Behavior (1)
- Mechanical strength (1)
- Mechanichal behaviour (1)
- Mechanische Kennwertermittlung (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemie (1)
- Median lethal energy deposit (1)
- Medieval glasses (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Melt Flow Rate (MFR) (1)
- Melt pool behaviour (1)
- Melting (1)
- Mesoporous (1)
- Mesoporous materials (1)
- Mesoporous thin films (1)
- Messunsicherheit (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metal reducing bacteria (1)
- Metal seal (1)
- Metallsulfide (1)
- Metallurgie (1)
- Methodenvalidierung (1)
- Micro computed tomography (1)
- Micro- and nanoplastics (1)
- Micro-XRF (1)
- Micro-heterogeneity (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological investigation (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microcracking (1)
- Microfluidic (1)
- Micromanipulation (1)
- Micromixer (1)
- Microparticles (1)
- Micropatterned dry adhesive (1)
- Microplastics in milk (1)
- Microplastics sampling (1)
- Microprinting (1)
- Microstructure Analysis (1)
- Microstructure analysis (1)
- Microstructure-property relations (1)
- Mikro-CT (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mikrostruktur (1)
- Mineralogie (1)
- Missbräuchliche Verwendung in Stadien (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model alloy (1)
- Model and measurement based analysis (1)
- Modeling (1)
- Moisture (1)
- Moisture drying (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular dynamic simulation (1)
- Monte-Carlo simulations (1)
- Morpho-chemical characterization (1)
- Morphology (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multielectrode (1)
- Multiphoton Lithography (1)
- Multiphoton lithography (1)
- Multiple ageing and rejuvenation (1)
- Multiplexing sensory fiber-optic microarrays (1)
- NDT 4.0 (1)
- NDT Monitoring (1)
- NFDI-MatWerk (1)
- Nano-landscape (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nanofiller (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticel based pH-probes (1)
- Nanophysik (1)
- Nanopipette modification (1)
- Nanopipettes (1)
- Nanoplastics (1)
- Nanoporous media (1)
- Nanorisk (1)
- Nanosafety (1)
- Nanosensors (1)
- Nanostructures (1)
- Natural rubber (1)
- Nd-sensitizer (1)
- Nd3+ (1)
- Neintron diffraction (1)
- Neozoon (1)
- Netron diffraction (1)
- Network Communication (1)
- Neutronbeugungsverfahren (1)
- Neutronen (1)
- Neutronendiffraktion (1)
- Neutronenradiographie (1)
- Ni-base superalloy (1)
- Ni-based alloy (1)
- Nickel based alloy (1)
- Nickelbasislegierungen (1)
- Niobium carbide (1)
- Niobium carbide powder (1)
- Nitrogen (1)
- Non destructive testing (1)
- Non-Destructive Testing (1)
- Non-classical crystallization theory (1)
- Non-destructive testing (1)
- Normalbeton (1)
- Novel equipment (1)
- Nuclear Magnetic Resonance (1)
- Numerical Modeling (1)
- Numerical modelling (1)
- Numerische Simulation (1)
- OH Radical (1)
- OH radical scavenger (1)
- OH radicals (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenkeimbildung (1)
- Offshore (1)
- One-part formulation (1)
- Online NMR Spectroscopy (1)
- Open data (1)
- Open science (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Optical connector (1)
- Optical criterion (1)
- Optical layer model (1)
- Optical properties (1)
- Optische Tomografie (1)
- Optoelektronik (1)
- Orientation-dependent microstructure (1)
- Orientierung (1)
- Osmolyte (1)
- Overlay (1)
- Oxide Glasses (1)
- Oxygen reduction reaction (1)
- P25 (1)
- P92 (1)
- PAEK (1)
- PDMS (1)
- PEG (1)
- PFAS (1)
- PH (1)
- PIM-1 (1)
- PMD Core Ontology (1)
- PMDco (1)
- POD (1)
- POSS (1)
- PU Learning (1)
- PVD /ECD process (1)
- Pair Distribution Functions (1)
- Pair distribution function analysis (1)
- Paracetamol (1)
- Partial discharge detection (1)
- Partial penetration (1)
- Particle Synthesis (1)
- Particle measurement (1)
- Particle scattering (1)
- Particle scattering simulations (1)
- Particle size (1)
- Particle size distribution (1)
- Particle size distributuion (1)
- Particle synthesis (1)
- Paste (1)
- Peem (1)
- Permeability (1)
- Permeation (1)
- Perovskite (1)
- Pharmaceuticals (1)
- Phase composition (1)
- Phased array (1)
- Phasenzusammensetzung (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorus (1)
- Photocuring (1)
- Photoluminescence (1)
- Photoresist (1)
- Photovoltaic (1)
- Phthalocyanine (1)
- Piezopolarisation (1)
- Pipeline (1)
- Plume (1)
- Politikberatung (1)
- Pollen (1)
- Polyacrylamide (1)
- Polyamid 12 (1)
- Polyaniline (1)
- Polyethylene Terephtalate (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polyethylene, PE-HD (1)
- Polyglycerol (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer coating (1)
- Polymer nanocomposites (1)
- Polymer optical fibers (1)
- Polymer optical fibre (1)
- Polymer-Ceramic-Composite (1)
- Polymeric membrane (1)
- Polymers of intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pores (1)
- Porosity growth (1)
- Porosität (1)
- Porositätsvorhersage (1)
- Porous Materials (1)
- Porous materials (1)
- Portland cement (1)
- Poster presentation (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Powder method (1)
- Preferred orientation (1)
- Pressure loading (1)
- Pressure tanks (1)
- Pressure wave (1)
- Primäre Explosionswirkug (1)
- Probenpräparation (1)
- Process Control (1)
- Processing (1)
- Propagation modes (1)
- Property simulation (1)
- Protective glazing (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein unfolding (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Proximatanalyse (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Präparation (1)
- Prüfmethoden (1)
- Prüfrichtlinie (1)
- Pulse reflection (1)
- Pulse shape analysis (1)
- Pulvermethode (1)
- Py-GC/MS (1)
- QD (1)
- QSPR (1)
- Quality control (1)
- Qualitätsüberwachung (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantum Chemistry (1)
- Quantum Dot-Rod (1)
- Quantum Yield (1)
- Quartz Crystal Microbalance QCM (1)
- Quartz nanopipettes (1)
- Quasi-distributed sensing (1)
- Quenching and partitioning (1)
- Qulitätssicherung (1)
- RAFT (1)
- ROS (1)
- Radar (1)
- Radical Scavenger (1)
- Radical scavenger (1)
- Radicals (1)
- Radiografie (1)
- Radiological inspections (1)
- Raman spectroscopy (1)
- Rare earth nanoparticles (1)
- Ratiometric Sensors (1)
- Ratiometric sensors (1)
- Rauheit (1)
- Rayleigh scattering (1)
- Recycling (1)
- Reduction 4-nitrophenol (1)
- Reduction of agglomerates (1)
- Reductive amination (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference materials (1)
- Reference nanomaterials (1)
- Reference particles (1)
- Reference procedures (1)
- Reference product (1)
- Reference samples (1)
- Refractory materials (1)
- Registrierungsdossiers (1)
- Reinforcing Bar (1)
- Reinheitsgradbestimmung (1)
- Reliable characterization (1)
- Repair (1)
- Reproducibility (1)
- Research Data Management (1)
- Research data management (1)
- Residual stress measurements (1)
- Residual stress state (1)
- Residual stresses (1)
- Resonance (1)
- Resonanz (1)
- Reverse-time migration (1)
- Rice husk ash (1)
- Rigid amorphous fraction (1)
- Ringversuche (1)
- Risse (1)
- Rissprüfung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Round robin (1)
- Round robin test (1)
- Rubber (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- S-phase (1)
- SALSA (1)
- SDS-PAGE (1)
- SEM analysis (1)
- SEP 1927 (1)
- SIEF (1)
- SSbD (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Safe-by-Design (1)
- Safer by design (1)
- Salt melt (1)
- Sandblasting (1)
- Sandsteine (1)
- Sandstone (1)
- Sandstorm (1)
- Sanger sequencing (1)
- Sapphire (1)
- Sc-ICP-ToF-MS (1)
- Scaffold (1)
- Scale-bridging (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Schichtdicken (1)
- Schichtherstellung (1)
- Schichttestung (1)
- Schutzverglasung (1)
- Schwefelgehalt (1)
- Schweißdatenmanagement (1)
- Schweißnähte (1)
- Schwindungsinhomogenitäten (1)
- Schwindungsverhalten (1)
- Scientific software (1)
- Sea Water (1)
- Seenotrettungsmittel (1)
- Selbstreinigung (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser curing (1)
- Self-assembly (1)
- Self-healing silicone rubber (1)
- Self-powdering (1)
- Self-reactive substances (1)
- Semantic Data (1)
- Semi-metallic friction material (1)
- Sende-Empfangs Prüfkopf (1)
- Sensor (1)
- Sequential learning (1)
- Service life (1)
- Service life model (1)
- Shape (1)
- Shell (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si wafer filter (1)
- Si-Ge (1)
- SiGe (1)
- SiO2 (1)
- Silanisation (1)
- Silanization (1)
- Silica Nanoparticles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicone rubber (1)
- Silver (1)
- Silver nanoparticle (1)
- Simvastatin (1)
- Single cell analysis (1)
- Single crystal X-ray diffraction (1)
- Single cystal (1)
- Single-stranded DNA-binding proteins (1)
- Size and size distribution (1)
- Size effect (1)
- Size-exclusion chromatography (SEC) (1)
- Sliding performances (1)
- Slow Strain Rate Testing (1)
- Slow crack growth (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle x-ray scattering (1)
- Small-angle xray scattering (1)
- Smart materials (1)
- Smouldering (1)
- Sodiumborosilicate glasses (1)
- Software (1)
- Soil (1)
- Soil-structure interaction (1)
- Solar Cell (1)
- Solarenergie (1)
- Solid-State-Reaction (1)
- Solution doping (1)
- Sorption (1)
- Spectral multiplexing (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopy (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Spinel (1)
- Spontane Polarisation (1)
- Spray drying (1)
- Sprengplattieren (1)
- Spring constant (1)
- Spruce (1)
- Stabilization of HT-structures at room temperature (1)
- Stabilizer (1)
- Stable suspensions (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless Steel (1)
- Stainless Steels (1)
- Standard (1)
- Standardisation (1)
- Standardization (1)
- Standardization of Ellipsometry (1)
- Starch (1)
- Starch nanoparticle (1)
- Strain sensors (1)
- Stress cracking resistance (1)
- Strontiumfluoride (1)
- Structural color (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Subgrain structure (1)
- Submerged arc welding (1)
- Substrate effect (1)
- Sulfiding (1)
- Sulfur (1)
- Superalloy (1)
- Superconducting (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Superplasticizer (1)
- Superplasticizers (1)
- Surface Chemical Transformation (1)
- Surface Energy (1)
- Surface Plasmon Resonance (1)
- Surface characterization (1)
- Surface crystallization (1)
- Surface energy (1)
- Surface functionalities (1)
- Surface group analysis (1)
- Surface morphology (1)
- Surface structuring (1)
- Surface texturing (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron XRD (1)
- Synchrotron radiation (1)
- Synchrotron refraction radiography (1)
- Synchrotron µCT and refraction radiography (1)
- Synthesizability (1)
- Synthetic air (1)
- TATP (1)
- TBC (1)
- TDLAS (1)
- TED-GC-MS (1)
- TEKKEN-Test (1)
- TEM Image (1)
- TGA-FTIR (1)
- THz and mid IR spectroscopy (1)
- THz spectroscopy (1)
- TIG-welding (1)
- TKD (1)
- TMDSC (1)
- TMF (1)
- TRIP (1)
- TRIS (1)
- Talbot-Lau interferomerty (1)
- Talbot-Lau interferometry (1)
- Tankdesign (1)
- Tauchwägung (1)
- Technical Lignin (1)
- Temeprature scaling (1)
- Temperature dependence (1)
- Temperature scaling (1)
- Tensile (1)
- Tensile Properties (1)
- Tensile test (1)
- Terahertz Tomography synthetic aperture (1)
- Terahertz synthetic aperture dielectric materials (1)
- Termites (1)
- Ternary quantum dot (1)
- Test method (1)
- Test methods validation (1)
- Test procedure (1)
- Testing (1)
- Textile fibres (1)
- Texture (1)
- Themal Transitions (1)
- Thermal Spray (1)
- Thermal arrier coatings (1)
- Thermal barrier coatings (1)
- Thermal cycling (1)
- Thermal decomposition (1)
- Thermal treatment (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermomagnetic material (1)
- Thermomechanics (1)
- Thermoplastic Polyurethane (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thickness (1)
- Thin Films; (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiO2 nanoparticle (1)
- Time-offlight Diffraction (TOFD) (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium nitride (1)
- Titanium-di-boride (1)
- Titration (1)
- Tomographie (1)
- Tomography (1)
- Tool steel (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topografie (1)
- Topography (1)
- Topometry (1)
- Torsional fatigue (1)
- Total scattering analysis (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transport mechanism (1)
- Tribological behavior (1)
- Tribologie (1)
- Trinkwasser (1)
- Tunnel (1)
- Two photon polymerisation (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Type III composite pressure receptacles (1)
- Tyrosine (1)
- UCNP (1)
- UCST polymers (1)
- UCST-type polymer (1)
- UPLC (1)
- UV Weathering (1)
- UV-irradiation (1)
- Ultra sound (1)
- Ultrafast laser processing (1)
- Ultraschall (1)
- Ultraschallprüfung (1)
- Ultraschalltauchtechnik (1)
- Ultrasonic (1)
- Ultrasonic Testing (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Ultrasonic echo technique (1)
- Uncertainty (1)
- Uncertainty budgets (1)
- UpConversion (1)
- Upconversion nanoparticles (1)
- Upconverting nanoparticles (1)
- VM12 SHC (1)
- Vacuum (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validation (1)
- Verbundwerkstoffe (1)
- Vereinfachtes Verfahren (1)
- Vergleichsstahlproben (1)
- Vernetzte Produktion (1)
- Verzinkungen (1)
- Videoskopie (1)
- Virtual experiments (1)
- Vitual computer tomography simulation (1)
- Volatile organic compounds (1)
- WIG-Blindschweißnaht (1)
- Waiting time (1)
- Wasseraufbereitung (1)
- Wasserstoffpermeation (1)
- Waste heat recovery (1)
- Water/alcohol mixtures (1)
- Wave propagation (1)
- Weld Joint (1)
- Wellenprüfung (1)
- White light interference microscopy(WLIM) (1)
- Widerstandpunktschweißen (1)
- Windkanal (1)
- Wood preservation (1)
- Workflow (1)
- X-Ray Diffraction (1)
- X-ray Computed Tomography (1)
- X-ray Photoelectron Spectroscopy (1)
- X-ray Diffraction (1)
- X-ray computer tomography (1)
- X-ray diffractometry (1)
- X-ray imaging (1)
- X-ray interferometry (1)
- X-ray scattering (1)
- X-ry Diffraction (1)
- XAS (1)
- Yb(III) (1)
- Yellowing (1)
- Young's modulus (1)
- Young´s modulus (1)
- Zahnmedizin (1)
- Zelluläres Polypropylen (1)
- Zement (1)
- Zementgebundene Baustoffe (1)
- Zentrifugentechnologie (1)
- Zeolite (1)
- Zersetzungsgasanalyse (1)
- Zerstörungsfreie Prüfung (1)
- Zinc and galvanized samples (1)
- Zirconium (1)
- ZnSe (1)
- Zonation (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zünder (1)
- additive manufacturing (1)
- aggregation-induced dual emission (AIDE) (1)
- bioimaging (1)
- burst test (1)
- cocrystal (1)
- creep behaviour (1)
- dangerous goods packagings (1)
- depth-profiling (1)
- excess isotherms (1)
- excitation power density (1)
- extreme temperature (1)
- fluorine (1)
- gas adsorption (1)
- gas solubility (1)
- high-resolution camera (1)
- hybrid repair (1)
- ionic liquids (1)
- life cycle test (1)
- low energy electrons (1)
- mechanochemistry (1)
- milling (1)
- pH probe (1)
- pH sensing (1)
- polyethylene terephthalate (1)
- porous solids (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- ssDNA (1)
- stress cracking resistance (1)
- test methods (1)
- µ-FTIR (1)
- µ-Raman (1)
- µ-XRF (1)
- µCT (1)
- Örtliche Korrosion (1)
- β-cristobalite structure type (1)
Organisationseinheit der BAM
- 6 Materialchemie (205)
- 5 Werkstofftechnik (97)
- 8 Zerstörungsfreie Prüfung (97)
- 6.3 Strukturanalytik (65)
- 8.5 Röntgenbildgebung (61)
- 6.6 Physik und chemische Analytik der Polymere (56)
- 9 Komponentensicherheit (54)
- 6.1 Oberflächen- und Dünnschichtanalyse (48)
- 1 Analytische Chemie; Referenzmaterialien (46)
- 4 Material und Umwelt (36)
Eingeladener Vortrag
- nein (1)
Lanthanide doped photon upconverting nanophosphors (UCNPs) have the unique capability to produce narrow band, multi-color emission in the UV/vis/NIR upon multiphotonic absorption of infrared light, which makes them promising reporters for diagnostic, bioanalytical, and biological applications. This minimizes background signals, which normally occur due to autofluorescence from auxochromes, in biological matrices and enables deep penetration depths in biological applications. Moreover, UCNPs show long luminescence lifetimes in the μs range favorable for time gated emission in conjunction with a high photostability and chemical inertness and they do not blink. One of the most efficient upconversion (UC) phosphors for conversion of 976 nm to 655 nm and 545 nm light presents the hexagonal NaYF4-host crystal doped with 20 % Yb3+ used as sensitizer to absorb infrared light and 2 % Er3+ acting as activator mainly responsible for light emission. The high transparency in the relevant spectral windows of this host together with its low phonon frequencies ensure relatively high luminescence efficiencies.
Although UCNPs are ideal candidates for many chemical and biological sensing and imaging applications, compared to other well-known chromophores like organic dyes or QDs, they suffer from a comparatively low brightness due to the low absorption cross sections of the parity forbidden f-f-transitions and low photoluminescence quantum yields (QYUC) particularly in the case of small nanoparticles with sizes of < 50 nm. The rational design of more efficient UCNPs requires an improved understanding of the nonradiative decay pathways in these materials that are influenced by particle architecture including dopant ion concentration and homogeneity of dopant distribution within UCNPs, size/surface-to-volume ratio, surface chemistry, and microenvironment. A promising approach to overcome the low efficiency of UCNPs is to use plasmonic interactions between a noble metal (Ag or Au) structure in the proximity of UCNPs and the incident light. This interaction leads to a modification of the spectroscopic properties due
to local field enhancements and can involve an increase of the photoluminescence. In this respect, we study the interactions of UCNPs with metal structures (clusters and shells) by varying shape and size. Here, first results derived from integrating sphere spectroscopy and time-resolved fluorescence measurements are presented.
Theoretical and experimental studies indicate that crystal nucleation can take more complex pathways than expected on the ground of the classical nucleation theory. A direct in situ observation of the different pathways of nucleation from solution is challenging since the paths can be influenced by heterogeneous nucleation sites, such as container walls.
The custom-made acoustic levitator using in these experiments regulates the influence that solid surfaces, temperature, and humidity have on the crystallization process. The investigations of the crystallization process of paracetamol were performed with in situ analytical techniques and theoretical simulations to gain a comprehensive insight into processes, occurring intermediates, and required reaction conditions. The targeted choice of the solvent and the concentration enabled the guidance of the pathways, therefore, resulting in the isolation of one desired crystalline structure.
X-ray refraction techniques represent a very promising, yet not so wide-spread, set of X-ray techniques
based on refraction effects. They allow determining internal specific surface (surface per unit volume) in a non-destructive fashion, position and orientation sensitive, and with nanometric detectability. While they are limited by the X-ray absorption of the material under investigation, we demonstrate showcases of ceramics and composite materials, where understanding of microstructural features could be achieved in a way unrivalled even by high-resolution techniques such as electron microscopy or computed tomography.
Alkaline earth metal fluoride nanoparticles have been investigated for application in wood protection. Sols of MgF2 and CaF2 were synthesized and their efficacy was tested against fungi and termites (Rehmer 2016, Krahl et al. 2016). The sols were characterized by XRD and SEM. The wood specimens were vacuum impregnated with nanoparticles and then exposed to fungi and termites according to EU certified test conditions. Our results show that wood impregnated with metal fluoride nanoparticles significantly reduce cellulose hydrolysis by fungi and termites. The wood samples were exposed to brown-rot fungi; Coniophora puteana and Poria placenta. Between the two fungi, the overall mass lost due to fungal degradation was lower for treated (MgF2 and CaF2) wood samples exposed to Coniophora puteana. Thus, the metal fluoride nanoparticles impregnated in the wood samples were more efficient in reducing cellulose degradation from Coniophora puteana than from Poria placenta. However the mass loss in samples treated with MgF2 was similar to those treated with CaF2, irrespective of type of fungi. Therefore, it is likely that fungal degradation in treated samples was dependent on the biocidal action of fluorides rather than on the differences in chemical and physical properties of MgF2 and CaF2, respectively. Conversely, for termite exposure, wood samples treated with MgF2 had lower cellulose degradation compared to those treated with CaF2. A possible explanation for this difference in results could be fungi and termites use separate mechanisms for cellulose hydrolysis which will be further investigated. Future experiments include testing the leaching potential of MgF2 and CaF2 nanoparticles from wood. The results from the leaching experiment will test if metal fluoride nanoparticles can provide long-term and environmentally safe protection to wood.
For concrete production aggregates, cement and water are mixed together and after 28 days of hydration a porous and multiphase material is formed. To consider the heterogeneity of concrete a 2D scanning system is used. The coarse aggregates (limit > 2 X d ) can be excluded. laser spot The remaining content is a mixture of flour grains and cement particles (micro heterogeneity). Harmful species like chlorides may penetrate together with water through the capillary pore space. A quantification of Cl regarding to the cement content only (European standard EN 206) is necessary for the damage assessment. A LIBS system operating with a NdCr:YAG laser (pulse energy of 3 mJ, a wavelength of 1064 nm, a pulse width of 1.5 ns, a repetition rate of 100 Hz) and two Czerny-Turner spectrometer (UV and NIR range) have been used.
The practical strength of glasses under ambient conditions is substantially lower compared to its intrinsic strength because of sub-critical crack growth (SCCG) from microscopic flaws. While SCCG is related to the humidity of the ambient atmosphere, leading to stress corrosion phenomena, the detailed kinetics are still not fully understood. To get better insight to the contribution of water on the crack-tip, highly water bearing glasses will be investigated by a new device for inert SCCG-measurements using double cantilever beam (DCB) geometry specimens. This device was designed to investigate the stress intensity factor in modus I and crack velocity in vacuum, but different atmospheres can also be introduced.
For validation of the new device, first experiments were performed on microscope slides as well as on a soda-lime silicate and a borosilicate crown glass. The results achieved will be presented in comparison to the published results of Wiederhorn.
A comparison between the results obtained from a Computational Fluid Dynamic (CFD) simulation and from the application of an empirical formula for determining the temperature distribution inside a tunnel in case of fire is presented. The temperature is measured and calculated at different distances from the location of the fire and at different time intervals. The fire considered varies with time following a time-heat release rate curve which has a parabolic growing phase, a constant period and a linear decay. The comparison reveals differences in the results. The temperatures calculated with the empirical formula resulted higher than the temperatures obtained by means of the CFD simulation. A list of possible reasons for this limited correspondence is also presented and commented. A proposal for further studies to better define the limitations of both the procedures and to define the influence of each parameter involved is finally presented.
We have shown that for C-ODTR based DAS two UV-inscribed scattering segments within an optical fiber have a significant influence on the local sensitivity Fading characteristics. This method was experimental proven to be suitable for distributed dynamic strain measurement in a thermally unstable environment. Signal-to-noise ratio analyses for detecting a signal peak within the time-dependent spectra were performed. Results show an increase in SNR and additionally that the occurrence of total loss of sensitivity (SNR <1) could be decreased by a factor of six when compared to an untreated standard fiber.
Microstructure and wear behavior of improved NbC cermets for (BS-1452) grey cast iron machining
(2017)
Tungsten carbide (WC) and cobalt (Co) based cermets are the most successful commercial cermets beacuse of the good combination of physical, mechanical and behavioral properties. Niobium carbide (NbC) has good mechanical and physical properties, such as high hardness, very high melting point and low density. SPS refined the NbC grains and increased the hardness, while substitution of Co with Ni improved the fracture toughness.
The widespread use of antibiotics in livestock farming leads to trace residues in food products and wastewater, potentially entailing antimicrobial resistance in food-borne pathogens. The determination of antibiotics in aqueous environments and foodstuff is thus of major concern.
We have been developing optical sensors based on molecularly imprinted polymers (MIPs) due to the low production costs, stability, format adaptability and the possibility to imprint and thus their ability to recognize a wide variety of target analytes. As a fluorescently responding moiety in the polymer matrix a tailor-made fluorescent indicator cross-linker for direct transfer of the binding event into an optical signal was used. If such a cross-linker is integrated into a thin MIP-shell on microspheres such core/shell particles can be readily used in advanced multiplexing sensory fiber-optic microarrays.
Here, we propose such a fiber-optic microarray based on fluorescent MIP microspheres for antibiotics. The binding behavior and the selectivity of a microarray using these silica core/MIP shell beads were examined and compared with a non-imprinted polymer (NIP) control, employing the target molecules and other structurally closely related antibiotics.
Mediaeval stained glass has been treated with Polymethylmetacrylate coatings by Kwiatkowski in Poland during the 1950th. Such treated panels were found in the Johannis Church of Toruń (without protective glazing), in the Cathedral of Włocławek (behind a protective glazing), and on glass kept in exhibition cases in the museum of Toruń. Surface coatings have been detected and analyzed. There was no extensive contamination by fungi or bacteria if the glass was either coated or not.
The manufacturing of NbC with Ni binder with addition of titanium carbide by using a colloidal process for blending the different powders without a milling step were investigated. The the sintering process and formation of the resulting microstructures, the phase relations and the hardness of the produced cermet materials are characterized.
The Federal Institute for Materials Research and Testing (BAM) and the Institute for Machine Tools and Factory Management (IWF) of the Technical University Berlin analyzed the suitability of various NbC types in comparison to tungsten carbide (WC) for use as a tool in cutting processes. The focus was placed on the optimization of the functional profile of NbC-based cutting materials with reproducible industrial production.
An efficient energy provision using fuel cells is linked to effecitve hydrogen storage capabilities. Because of its low intrinsic hydrogen permeability, glass has a huge potential in modern concepts of hydrogen storage. Previous studies on oxidic glasses showed an empirical connection between glass composition and gas permeation, which was mainly derived from the behavior of silica glass. In this study we focus on the relationship between topologic (free volume; network polymerization) and thermodynamic (configurational entropy) parameters. The comparison of three glasses within the meta (earth-) alkaline alumino silicate system to silica glass shows that an increase of the atomic packing factor (APF) does not necessarily decrease the permeability. Furthermore, the results suggest a connection between ΔCp at Tg and hydrogen permeability of the glass. All experiments were performed assuming that chemical hydrogen solubiltity in glass is negligible at temperatures well below the glass transition temperature.
Most crucial for components of complex shape or heterogeneous micro structure, precise control of sintering has decisive influence on dimensional accuracy, mechanical integrity and reliability of sintered components. In these cases, only in situ 3D high-temperature shape screening during shrinkage would allow revealing temporary sinter warpage and hereby caused potential defects. Against this background, nokra Optische Prüftechnik und Automation GmbH, HTM Reetz GmbH and BAM developed a testing device for in situ 3D shape screening for ceramic and glass-ceramic tapes up to 1000°C by means of high-temperature laser profilometry. The local repeatability of the sample-sensor distance (sample height profile) is 10 µm at 1000°C. Current work is focused on dropping these restrictions in sample shape and temperature. In a second testing device, currently being in development, samples up to 5 cm x 5 cm x 5 cm can be measured at temperatures up to 1500°C.The presentation illustrates the current state of this work and possible applications of the method.
The development of glassy hydrogen barriers requires the determination of low H2 permeabilities. Previous studies and numerical simulations have shown that the VHE powder method (vacuum hot extraction with mass spectrometric gas detection) is suitable for this purpose. The measured isothermal gas emission is fitted to a classical diffusion model for spherical particles from which the diffusion coefficient of the glass is calculated. The H2 permeability is determined by means of the solubility determined from the same measurement data. This presentation is referring to the optimization of the method regarding sample preparation and measurement data evaluation using suitable experimentally determined particle size distributions is reported. For quartz glass, it is shown that the accuracy of classical measuring methods is achieved with the VHE powder method. Furthermore, other examples of substantially gas-tighter glasses are given.
The chemical industry has expressed great interest in using polyethylene terephthalate (PET) as material for packagings for the transport of dangerous goods. Due to the high strength and stiffness of PET, the wall thickness and weight of packagings can be reduced.
The aim of this work was to find a laboratory test method for the determination of the stress cracking resistance of PET. One test method is the Full Notch Creep Test (FNCT), which was developed for polyethylene (PE) and is described in the standards EN ISO 13274 and EN 15507. It was investigated whether testing specimens made of PET with a full coplanar notch around the middle of the specimens show weakening after the impact of a tensile force in a wetting solution at 50°C. Unfortunately, this method couldn’t be used for PET because the specimens broke during notching due to the high brittleness of PET. The molding of the sheets and the following temper process for twelve hours are very time-consuming, Another possibility is laid down in BAM’s Dangerous Goods Rule BAM-GGR 015. This test was carried out with 1l PET bottles, which were filled with a 5% wetting solution and mounted with a clamping tool for 28 days at 40°C. Tensile test specimens were cut out afterwards from the middle of the bottles in the deformed areas. The tensile properties of the PET specimens couldn’t be determined due to the hardness of the material.
In conclusion, the only way to provide information about the stress cracking resistance of PET was to perform stacking tests with PET design types of packagings. 1l bottles made of PET were filled with a 5% wetting solution and stored with a stacking load for 28 days at 40°C according to EN ISO 16495. The test bottles of PET passed the stacking tests.
Several restoration projects of stained-glass windows have been performed in Poland since 2010.Chemical analysis of glass samples was performed with SEM/EDX on a FEI ESEM-XL 30, (EDX-EDAX) and with Micro-XRF (M4 Tornado, Bruker).The chemical composition of medieval glass samples and of glass samples of the 19th Century have been determined.
Leichtbaustrukturen aus Verbundwerkstoffen stellen einen immer größeren Anteil im Flugzeug- und Automobilbau dar. Hiermit steigt die Nachfrage nach zuverlässigen, zerstörungsfreien Prüfmethoden, welche an solche Strukturen angepasst sind. Besonders Luftultraschall (LUS) eignet sich für diese Aufgabe, da hier kein Koppelmedium benötigt wird. Derzeit wird für diese Methode jedoch oft ein beidseitiger Bauteilzugang für eine Prüfung in Durchschallung vorausgesetzt. Handelsübliche Prüfköpfe für Luftultraschallanwendungen nutzen zudem meist Anpassschichten um den Impedanzunterschied zwischen Schwinger und Luft zu reduzieren. Sowohl Signal-Rausch-Abstand als auch die Bandbreite der resultieren-den Prüfköpfe ist für viele Anwendungen jedoch nicht ausreichend. Durch den Einsatz von Ferroelektreten wie zellulärem Polypropylen (zPP) kann hingegen vollständig auf Anpassschichten verzichtet werden. Hierbei handelt es sich um polarisierte, zelluläre Polymerschichten mit sehr geringer Dichte, Steifigkeit und Schallgeschwindigkeit.
In diesem Beitrag stellen wir drei verschiedene Sende-Empfangs-Prüfköpfe vor, welche auf zellulärem Polypropylen basieren. Anhand von Schallfeld, Signal-Rausch-Abstand und Sendepegel werden diese Prüfköpfe charakterisiert. Die Ergebnisse werden mit den Ergebnissen von Referenzprüfköpfen ohne Sende-Empfangs-Charakteristik verglichen. Bei den Referenzprüfköpfen werden sowohl handelsübliche LUS-Prüfköpfe, sowie bisher entwickelte Prüfköpfe aus zellulärem Polypropylen berücksichtigt.
Ferritic steels with chromium contents up to 13 wt% are used as materials for power plant components as boiler materials (< 2 wt% Cr) and super heater tubes (> 9 wt% Cr). These materials are subject to aggressive corrosion caused by hot gases such as CO2, H2O, O2 and SO2. Especially SO2 causes fatal corrosion even as a minor component. To examine sulfurous corrosion mechanisms, experiments with pure SO2 were conducted. A proper analysis of the material changes requires phase identification and quantification with a high lateral resolution within the corrosion scale.
Additive Manufacturing (AM) by Selective Laser Melting (SLM) offers ample scope for producing geometrically complex parts in comparison to the traditional subtractive manufacturing strategies. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The present study aims to evaluate the bulk residual stresses in SLM parts by using neutron diffraction measurements performed at E3 line -BER II neutron reactor- of Helmholtz-Zentrum für Materialien und Energie (HZB) Berlin. Together with microstructure characterization and distortion measurements, it is possible to describe the stress state throughout the whole sample. The sample was measured in as-build condition (on a build plate) and after releasing from the build plate. The used material is the nickel based superalloy 718. This alloy is widely used in aerospace and chemical industries due to its superior corrosion and heat resistant properties.
Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component. The normal and transversal component exhibits a rather compressive behavior while the longitudinal was tensile in the center part of the sample and became compressive towards the tip. As expected, the absolute values of all stress components decreased after releasing the sample from the building plate. A surface scan utilizing a coordinate-measuring machine (CMM) allowed us to present top surface distortion before and after releasing. The top surface showed a distortion around ±80µm after releasing. Microstructure evolution in the scanning-building cross-section is largely dominated by columnar grains. In addition, many small random orientated grains are prominent in the regions of a laser overlap during SLM.
In summary, for the sample of superalloy 718 manufactured by SLM, a small distortion occurred when removing the sample from the build plate whereby the residual stress state decreases. Moreover, the observed columnar grains in the building direction could give a reason for the lowest stress values in that normal direction. However, the most important parameter controlling the residual stresses is the temperature gradient. Hence, future investigations are planned for a different scan strategy to distribute the laser impact in a more homogenous manner.
Die Mikrostruktur ferromagnetischer Materialien hat einen maßgeblichen Einfluss auf deren magnetischen Eigenschaften. Gerade bei niedrigen Feldstärken zeigen sich Parameter wie Koerzitivität, Permeabilität und Verlustleistung hoch sensitiv.
Wir zeigen am Beispiel des unlegierten Baustahls S235JR, dass die magnetische Mikrostruktur an der Probenoberfläche in hohem Maße mit inhomogenen Dehnungen übereinstimmt. Zur Detektion der Kleinststreufelder verwenden wir speziell designte GMR Sensorik, die Sensitivität (3mV/V/kA/m) mit hoher Ortsauflösung (180 µm) vereint. Infolgedessen können wir auf eine aktive magnetische Anregung verzichten. Wir nutzen allein die sich durch magneto-mechanische Prozesse ausbildende „spontane“ magnetische Mikrostruktur des Materials.
Das hervorragende Signal-Rausch-Verhältnis unserer GMR-Sensorik für inhomogene Streufelder erlaubt, schon geringe und lokal abgegrenzte plastische Deformationen in Form und Position reproduzierbar zu visualisieren. Die zugehörigen Signale zeigen die typische Sequenz von erhöhten positiven und negativen Normalkomponenten wie sie bei einer Rissanzeige der aktiven Streuflussprüfung (MFL - Magnetic Flux Leakage) beobachtet wird. Magnetisch kann eine plastische Zone daher als Vorstufe eines Risses betrachtet werden, deren relative Permeabilität für den Riss als Grenzfall zu μr = 1 tendiert.
Die mechanische Spannung ist ein maßgeblicher Parameter ferromagnetischer Materialien. Wird ein solches Material unter die Curie Temperatur abgekühlt, zerfällt es spontan in nahezu selbstgesättigte magnetische Domänen. Diese Magnetisierung führt gleichzeitig zu einer Verformung der mit ihr gekoppelten Kristallgitter. Ein Effekt der auch reziprok gilt: wird die Gitterverformung durch eine Spannung behindert ändert sich zwangsweise der magnetische Zustand.
Man kann annehmen, dass zwischen unterschiedlichen, für sich aber homogen verspannten Werkstoffbereichen, lokale magnetische Streufelder auftreten, weil magneto-mechanische Effekte eine Inkompatibilität der Domänenstruktur induzieren. Bekanntlich bilden sich Spannungsgradienten nach Schweißprozessen durch ungleichmäßigen Wärmeeintrag, thermischer Dehnung, und unterschiedlichen Abkühlraten aus.
Unter dieser Prämisse untersuchen wir Wolfram-Inertgas geschweißte Blindnahtproben (250x100x4,8 mm^3) aus einem hypereutektoiden Baustahl.
Der Spannungszustand der Proben wurde anhand von Neutronendiffraktometrie (ND) am Instrument E3 am Reaktor BERII (Helmholzzentrum Berlin, HZB) charakterisiert. ND ist ein Referenzverfahren für die quantitative Bestimmung von elastischen Dehnungen in kristallinen Materialien, deren Gitter selbst der Messmaßstab ist. Die Auswertung zeigt hohe Längsspannungen mit lokalen Maxima in Größenordnung von 600 MPa, die von umgebenen Druckspannungszonen kompensiert werden.
Zur Detektion der magnetischen Kleinststreufelder verwenden wir speziell designte GMR-Sensorik (GMR - Giant Magneto Resistance), die aufgrund der geringen Größe ihrer aktiven Sensorelemente hohe Ortsauflösung mit Sensitivität vereint. Die Visualisierung der Messergebnisse lässt eine klare magnetische Mikrostruktur der Schweißnähte erkennen, in der die Streufelder lateral in Größenordnung des Erdmagnetfeldes variieren (~50 µT).
Wir zeigen durch einen Vergleich beider Messverfahren, dass lokale magnetische Streufeldmaxima in hohem Maße mit den Spannungsgradienten übereinstimmen.
Regelwerke zur zerstörungsfreien Bestimmung des Reinheitsgrades wie das SEP 1927 und die ASTM E588 erreichen ihre Vergleichbarkeit unter Anwendung von - vergleichsweise einfachen - Referenzfehlern. Hinsichtlich Realisierbarkeit wird somit der Kompromiss zwischen Herstellung des Referenzfehlers und der erreichbaren Nachweisgrenze gefunden.
Zur Weiterentwicklung über die Grenzen der SEP1927 hinaus, wurde der Versuch unternommen Fehler kleiner 500 μm herzustellen - welche aufgrund der geringen geometrischen Ausdehnung fertigungsbedingt schwierig zu realisieren sind. Bei den vergleichenden Untersuchungen kristallisierten sich zwei Fertigungsverfahren, Funkenerosion (EDM: electrical discharge maching) und die Fertigung der Bohrungen unter Verwendung eines Hochleistungslasers, als vielversprechend heraus. Zunächst wurden die Fehler mit beiden Verfahren in unterschiedlichen Größen (100, 250 und 100 μm) und Tiefen (1, 1,5 und 2 mm) unter Anwendung von computertomographischen Verfahren der Röntgenprüfung, die Geometrie der eingebrachten Fehlstellen und anschließend durch hochauflösende Tauchtechnikmessungen das Reflektionsverhalten charakterisiert.
Time- and space-resolved in situ LIBS measurements of chemical compositions during TIG-welding
(2017)
An in situ monitoring of chemical compositions in the weld pool and the heat affected zone (HAZ) can enable the control of the welding process through the regulation of the welding parameters, and thus can prevent possible weld defects.
The most critical parameter for hot cracking -from a metallurgical point of view- is the chemical composition of the weld pool.
Chemical composition can be measured and quantified during the welding process with the LIBS technique having the appropriate calibration measurements.
Fluorescence microscopic and spectroscopic monitoring of degradation processes upon polymer ageing
(2017)
The majority of all routinely used methods to assess polymer aging are based on destructive tests and methods. Early indicators for the deterioration of polymer materials are e.g., physical or mechanical properties like tensile strength, adhesion, brittleness, and color. It is well-known, however, that predominantly chemical changes are the underlying process of the physical changes that occur in organic materials upon aging over time. Typical initial steps during polymer degradation are crosslinking or chain breaking, alteration of autofluorescence, “yellowing” or bleaching caused by the formation of new functional groups. A straightforward strategy towards the sensitive detection and monitoring of chemical changes in the course of polymer aging is based on non-destructive optical measurements. Luminescence techniques, one of the most sensitive spectroscopic methods are the method of choice. Here, we present first results of luminescence-based monitoring of polymer degradation induced by different environmentally relevant weathering factors (e.g. humidity and UV exposure). Our studies include fluorescence spectroscopy as well as spectral scanning confocal fluorescence microscopy and clearly demonstrate the possibility to follow accelerate-aging processes by luminescence detection.
Metallic springs undergo oxidation and creep at elevated temperatures and their use is limited to temperature of about 650°C. Therefore, there is a need for stable materials which can easily withstand temperatures up to 1000°C for long periods in different atmospheres. Ceramic materials have been drawing attention due to their excellent properties. This work aimed at investigating the high-temperature stability of zirconia and alumina ceramic springs at elevated temperatures under different atmospheres (air, N2 and H2) in order to determine the limitation of use of these ceramic springs.
The synthesis of hybrid inorganic/organic copolymers, using reversible deactivation radical polymerization (RDRP) techniques, has been an intensively studied research topic over recent years. A plethora of hybrid inorganic/organic copolymers were synthesized, including hybrid inorganic/organic block copolymers as well as random copolymers,[1–4] that showed great potential in fabricating hybrid (nano)materials with tailored properties [5]. Two widely employed RDRP techniques to prepare such hybrid inorganic/organic copolymers are atom transfer radical polymerization (ATRP) [1,2] and reversible addition-fragmentation chain transfer (RAFT) polymerization [3,4]. In order, to afford hybrid inorganic/organic copolymers with narrow dispersity, high conversions and precise structures, it is required to choose proper reaction conditions. Due to the importance of both ATRP and RAFT in the preparation of such hybrid polymers, we aim to compare both RDRP techniques by preparing 2-acetoxyethyl methacrylate (AcEMA) and 3-(triethoxysilyl)propyl methacrylate (TESPMA) based homopolymers. For this purpose, AcEMA and TESPMA were polymerized in 1,4-dioxane at 60 °C mediated by CuBr/N,N,N',N'-pentamethyldiethylenetriamine (PMDETA) and 2-(2-carboxylethylsulfanylthiocarbonyl-sufanyl) propionic acid (TTC) as well as cumyl dithiobenzoate (CDB) to evaluate the suitability and reliability of ATRP and RAFT to prepare such hybrid (co)polymers.
Polyurethanes (PU) are formed by polyaddition reaction between diols and diisocyantes. They can be formed utilizing three building blocks, namely a polyol or long-chain diol, a chain extender or short-chain diol, and a diisocyanate. The derived multi-phase block copolymer has thermoplastic properties and is called thermoplastic PU (TPU). This modular approach allows for a variety of alternations yielding a broad range of structural properties and applications. TPUs are based on three main classes of polyols, i.e. polyethers, polyesters, and polycaprolactones. With these different polyols and the ability of changing the ratio of building blocks a variety of material properties can be obtained thus TPUs find numerous applications in e.g. lightweight construction1, insulation, flame retardants, lacquer and glue, as well as medicine.
Linear, isocyanate terminated, polyurethane prepolymers prepared from non-equivalent amounts of diisocyanate such as methylene diphenyl diisocyanate (MDI) attached to a polyol are widely used as precursors of the correspondent polymers. Chain-extending reactions with low molecular weight compounds bearing different amounts of active hydrogens enable both linear and crosslinked polyurethane to be formed.
Due to TPUs being used in a broad range of applications facing a variety of stress (e.g. mechanical, hydrolytic, thermal, radiative/UV, as well as its combinations) the complexity of possible degradation mechanism is high. A functional group derived from degradation of the bulk matrix can be detected utilizing a suited fluorogenic sensor molecule. There are several fluorogenic dyes known for the application as sensor for amine groups e.g. fluorescamine, pyrylium dyes, deriving a fluorescent signal upon reaction.
One of today’s major problems in many technical plants as well as fuel tanks is Microbial induced corrosion (MIC), leading to considerable damage and huge financial losses. Successful prevention of MIC requires the localization of first signs of corrosion as well as the identification of factors influencing the corrosion process. Hence, there is a growing need for sensitive and preferably inexpensive tools that enable the early detection of MIC. Of utmost importance are methods, which provide spatially and time-resolved information and allow the determination of corrosion rates at sites of interest for possible prevention of MIC.
Experimental study on M23C6 nucleation and growth mechanisms in Ni-base superalloy single crystals
(2017)
The addition of carbon to Ni-base superalloy single crystals has been increasingly carried out to improve low angle grain boundary (LAGB) resistance and castability. Consequently, the precipitation of carbides is highly probable during long-term application of components subjected to higher temperatures (> 1000 °C). While the view on the role of carbides as strengthening or detrimental is polemical, their inevitable increased presence in carbon-doped alloys must be addressed. In the present work, the evolution of M23C6 carbides forming in the commercial grade Ni-base superalloy LEK 94 during high-temperature and low-stress creep exposure is assessed. Although carbon is not intentionally added to the LEK 94 alloy, it admits up to 0.1 at. %, which together with the high content of M23C6-forming transition metals, leads to their precipitation. The precipitation is induced here during creep experiments at 1020 °C and a nominal applied stress of 160 MPa along [001]. The correlation of precipitation and external load is carried out by evaluating the carbides in the gage section of parallel and circularly notched cylindrical samples, as well as in their heads. Characterization is made by transmission electron microscopy (TEM). Although primary MC carbides form mostly in interdendritic regions during casting, high temperature exposure induces M23C6 carbide nucleation especially in the γ phase of dendritic regions, where a stronger partitioning of refractory elements is present. The carbides have a needle shape with their main axis on 〈100〉 and a cube-on-cube orientation relationship. They present incoherent {100} facets along their elongated region and semi-coherent {111} facets at their ends. Their nucleation and growth mechanisms are discussed based on microstructural observation under different experimental conditions.
Zur Vermeidung der schädigenden Alkali-Kieselsäure-Reaktion in Betonbauwerken wird die Alkalireaktivität von Gesteinskörnungen im Vorhinein getestet. Der 60°C-Betonversuch ermöglicht eine vergleichsweise schnelle Einschätzung nach fünf-monatiger Testzeit. Dazu wird die Dehnung von Betonprüfkörpern, die mit der zu testenden Gesteinskörnung hergestellt wurden, manuell alle 28 Tage gemessen. Ein alternatives, an der BAM in den vergangen Jahren entwickeltes Verfahren setzt Dehnungssensoren ein, um kontinuierlich und online zu messen. Die Dehnungskurven sind eine gute Grundlage sowohl für die Prognose vom Expansionsverhalten während des Tests als auch für die Validierung von Expansionsmodellen.
The interest in porous anodic aluminum oxide (AAO) has been rapidly growing due to its numerous applications in separation, catalysis, energy generation and storage, electronics, and sensors. From the scientific point of view, AAO is a topical interest in soft matter fields. Spatial confinement of soft matter in nanoporous media influences its structure, thermodynamics, and mobility. Embedding polymers and liquid crystals into nanopores of AAO results in a 2D nanoconfinement of these materials. This confinement affects their properties, compared to the bulk, such as phase transition temperatures and enthalpies, molecular mobility, and architecture of the crystallization. On the other hand, discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropic phase, driven by the overlap of the π orbitals of their aromatic core. This leads to a high charge-carrier mobility along the column axis. Further, these columns could then be considered as “molecular nanowires”. In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, was confined into nanoporous AAO membranes. The structure, dynamics and the phase behavior of the confined HAT6 were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous AAO membranes by melt infiltration in the isotropic phase under argon atmosphere. The membranes have parallel aligned cylindrical nanopores, with pore diameter of 10, 20, 25, 40, 80, 120 and 180 nm. The filling degree for each sample was checked by thermogravimetric analysis (TGA) in order to ensure complete filling. Bulk HAT6 forms a hexagonal columnar phase; in between the isotropic phase above 371 K and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 split the plastic crystalline-to-hexagonal columnar phase transition in two, which might be interpret as two different phase structures; close to the wall and at the pore center. Moreover, the isotropic-to-columnar transition of the confined HAT6 shifted, with decreasing pore diameter, to lower temperatures. Furthermore, pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. HAT6 was embedded into the modified membranes by the same aforementioned preparation. The influence of the changed host-guest-interaction, on the structure, dynamics, and the phase behavior of HAT6 confined in the modified membranes, was also investigated by BDS and DSC.
Upconversion nanoparticles are characterized by their ability to convert low energy near-infrared excitation in high energy emissions in the visible range. This is enabled by sequential absorption of two or more photons via energy transfer from the sensitizer lanthanide ion Yb3+ to an activator lanthanide ion, e.g. Er3+. Yb3+ sensitation has the advantage of 980 nm excitation achieved by commercial available low power cw laser modules.
Nevertheless, for some applications, especially in aqueous media, which is predominantely in bioanalytical applications, there is the drawback of a local Absorption maximum of water at this wavelength. Sample heating can occur, and excitation power density is strongly distance dependent.
To overcome this issue, the idea is to shift the excitation wavelength to 808 nm. This can be achieved by a tandem-excitation using Nd3+ and Yb3+ ions. Nd3+ gets excited by 808 nm irradiation and transfers the energy to Yb3+, which triggers the upconversion emission of the Er3+ ions. Therefore, it is mandatory to separate Nd3+ and Er3+ by core-shell architecture for reducing the energy backtransfer from Er3+ to Nd3+.
To further enhance the upconversion luminescence an additional inert shell formed by the host material NaYF4 reduces the quenching effects caused by surface defects and dangling bonds.
By means of an effective medium (EMA) based approach, it is possible to use spectroscopic ellipsometry to determine the mixing ratios between air and material in porous dielectrics and calculate a quantitative value of the porosity for these materials. As this method is model-based, it is very difficult to provide a quantitative measure for the accuracy of porosity values determined by this method. Valuable additional information can often be obtained by combining ellipsometry with other complementary methods. In the present study, the ellipsometry results were validated by Electron Probe Microanalysis (EPMA) with the option of layer analysis (by the socalled “STRATAGem” approach), gravimetry, and electron microscopy. We analysed porous TiO2 thin layers synthesised by means of a template synthesis Approach (evaporation induced self assembly).
Ellipsometry measurements on porous samples are difficult to analyse due to the complexity of the models necessary. Often it is difficult to decide if the measured data contains enough information to successfully determine the target quantities (mixing ratio, dielectric function of the matrix material). One method to decrease the complexity of the fit and therefore use the measurement data most efficiently is a multi-sample analysis. In the present case, multi-sample analysis was used for determining the porosity factors of the individual layers while using one common set of dielectric function values for the matrix in all cases.
While the results of the fit analysis in this case can be used to show the feasibility and also the limitations of the multi-method approach, the porosity values themselves show a promising agreement between the Independent methods. It can therefore be concluded that determining porosity values with ellipsometry is in accordance to other methods to the level of accuracy provided by the complementary methodologies.
Chemical admixtures like superplasticizers or stabilizing agents are of ever increasing importance for modern concrete technology. Although such admixtures have meanwhile become common practice in many applications of concrete technology, the understanding of these highly complex systems is still limited and the relevant parameters, which predominantly control the interaction between the superplasticizer and the cement components, have not been identified yet.
Optical methods have been successfully used for the analysis and monitoring of the interactions between a broad variety of nanoscale and molecular systems like nanoparticles of various chemical composition and different types of organic ligands or biomolecules. This encouraged us to assess the potential of these methods, and particularly reflectance and fluorescence measurements, for the study of the interactions that occur at the interface between particle or hydrate surfaces and the fluid phase at a very early stage of concrete formation. Special emphasis is dedicated to search for and identify differences between commonly used superplasticizers.
Here, we focus on hydration effects using commercial comb shape polycarboxylate ethers (PCEs) with different charge densities, which are known to allow a very low water/cement ratio (w/c of 0.20 or less) while maintaining good workability. Based upon changes of the intensity of the reflectance and fluorescence signal and spectral effects of a dye, acting as optical reporter, a model for the interactions of dye, PCE molecules and cement nanoparticles in the very first phase of cement hydration is derived
The results are based on data1. Figure 3 displays temperatures of the tank wall and of the gas phase over testing time. It can be seen that a complete coating strongly delayed the heating of tank wall and gas phase, whereas the partly coated tanks only had a minor influence on temperature development. There was no significant difference between a half coated and a thirdly coated tank measurable. Figure 4 shows the internal pressure of tanks over testing time. Only the fully coated tank enabled a low pressure over 90 min testing time. Hence, a complete coating is necessary to guarantee the fire safety of hazmat tanks and a partly coating is not sufficient.
Spray drying based granulation processes aim for flowable granules neither containing voids nor hard shells thus leading to a homogenous microstructure in the green and sinter bodies without strength reducing large pores. The increase of the specific surface area due to the utilization of finer powders as raw materials makes the production of granules of demanded quality more sophisticated. Innovations regarding additives as well as process engineering are therefore required.
While conventional spray granulation processes of ceramic materials are based on rotational, one stream or two stream nozzles for nebulization, the investigations in the ZIM project concentrate on the applicability of an ultra sound atomizer unit. A spray dryer comprised of the aforementioned ultra sound atomization unit implemented in a commercial spray dryer (Niro, Denmark) was used as test system. Potential advantages of the ultra sound nebulization are investigated for model systems of alumina, zirconia and a ZTA composite while focusing on solids content, yield, pressability and granule properties (size, size distribution, flowability, shape and microstructure) as well as the final sinter body properties (density, microstructure and flexural strength).
First ultra sound spray drying experiments yielded granules with excellent processability. Spray drying of identical slurries, as before tested and optimized for a two stream nozzle atomization process, resulted in a more suitable size distribution for dry pressing (less particles below 20 µm) and a higher yield. Furthermore, sinter bodies produced of ultra sound granules seem to have less large pores and a more homogenous microstructure
Additive manufacturing (3D printing) of ceramics and other materials offers significant advantages compared to conventional production processes for several applications. While ceramics have been extensively investigated in this regard, additive manufacturing of geopolymers have received much less attention to date. In the present contribution we study a ‘standard’ metakaolin-based geopolymer, a fly ash-based geopolymer and a silica-based one-part geopolymer regarding their suitability for additive manufacturing via selective laser curing. Model geometries such as bars and cuboids could be produced by this route. After selective laser curing the specimens were additionally cured at 80 °C for 24 h. The specimens were studied by means of scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). SEM showed that the precursors in all geopolymers had reacted partially and geopolymeric gel had formed. XRD confirmed these results and additionally revealed that the crystalline byproducts (zeolites) in the one-part geopolymer differed from the byproducts observed in conventionally produced samples. This indicates that also the geopolymerization reactions differ between the two synthesis routes. The mechanical strength after selective laser curing and 80 °C-curing appeared to be highest for the metakaolin-based geopolymer. However, SEM also showed that a significant volume of macropores remained in most regions of all specimens, while some regions in the metakaolin-based geopolymer appeared to be significantly denser. These preliminary results demonstrate that selective laser curing offers potential for the production of geopolymers, but more research has to be undertaken to optimize the process.
Einfluss des Schwefelgehalts auf die Korrosionsbeständigkeit des nichtrostenden Stahls 1.4404
(2016)
Die Korrosionsbeständigkeit nichtrostender Stähle wird maßgeblich von ihrer chemischen Zusammensetzung bestimmt. Der tendenzielle Einfluss ist für die Hauptlegierungselemente in der wissenschaftlichen Fachliteratur beschrieben. Bei Begleitelement Schwefel gibt es dagegen keine konkreten Untersuchungen die belegen, ab welchem Gehalt mit einer Verringerung der Korrosionsbeständigkeit zu rechnen ist. Im Lichtbogenschmelzofen wurden verschiedene Legierungen mit abgestuftem Schwefelgehalten hergestellt, um den Einfluss dieses Begleitelementes auf die Korrosionsbeständigkeit systematisch zu untersuchen. Die KorroPad-Prüfung und die Bestimmung kritischer Lochkorrosionspotentiale wurden zur Charakterisierung der Legierungen genutzt. Beide Methoden belegen eine zunehmende Verringerung der Lochkorrosionsbeständigkeit mit dem Schwefelgehalt.
Die Korrosionsbeständigkeit geschweißter Konstruktionen aus nichtrostenden Duplexstählen wird von den Schweißparametern und der Nachbehandlung der Oberflächen bestimmt. Eine etablierte Methode der Schweißnahtnachbehandlung ist das Strahlen der Oberfläche mit Glasperlen. Diese Methode soll aus wirtschaftlichen Gründen durch das Strahlen mit Korund ersetzt werden, welches deutliche Zeit- und Kostenvorteile bietet. Besonders bei der Lochkorrosionsbeständigkeit hat sich das Schleifen mit Korund bereits als nachteilig erwiesen, weshalb diese Umstellung auch beim Stahlen kritisch hinterfragt wird. Daher wurden Probeschweißungen bei der Firma Modersohn hergestellt und mit verschiedenen Oberflächenbearbeitungsmethoden (Glasperlenstrahlen, Korundstrahlen, Beizen, Elektropolieren, Schleifen) nachbehandelt. Diese verschiedenen Oberflächenzustände wurden analytisch (REM, Rauheit) charakterisiert und hinsichtlich ihrer Lochkorrosionsbeständigkeit vergleichend untersucht werden, um die Eignung des Strahlens mit Korund zu beurteilen.
Martensitische nichtrostende Stähle werden in verschiedenen technischen Bereichen eingesetzt, bei denen eine optimale Kombination aus hoher mechanischer Festigkeit und guter korrosiver Beständigkeit gefordert wird. Beide Eigenschaften werden in der Industrie primär durch die Wärmebehandlung gesteuert. Die Korrosionseigenschaften sind dabei stark von der diffusionsbedingten Bildung und Auflösung von Chromkarbiden abhängig. In vergangenen wissenschaftlichen Arbeiten konnte nachgewiesen werden, dass die Abkühlgeschwindigkeit nach dem Austenitisieren einen großen Einfluss auf die Bildung solcher Karbide hat. Der Einfluss der Abkühlgeschwindigkeit auf die Lochkorrosionsbeständigkeit wurde an den Stählen 1.4108 und 1.4116 systematisch untersucht. Mit Hilfe des Stirnabschreckversuches wurde dabei die Abkühlgeschwindigkeiten variiert und anschließend die Veränderung von Gefüge, Lochkorrosionsbeständigkeit und Härte untersucht. Als Ergebnis konnten kritische Abkühlgeschwindigkeiten ermittelt werden, bei denen eine kritische Verringerung der Korrosionsbeständigkeit einsetzt.
Renewable resources become more and more relevant to maintain energy demands for an increasing global population. Biosynthetic fuels like biodiesel might replace conventional petrochemical fuels. In this study the influence of microbial growth on biodiesel and diesel on the storage tank systems were investigated. Polymeric fuel storage tanks for diesel and biodiesel provide suitable environmental conditions for a broad spectrum of fungi and various bacteria, including cyanobacteria and aerobic heterotrophic, and even anaerobic, fermentative Bacteria. However, the questions whether and how ageing of the materials is affected by biofouling processes have not been answered so far. Therefore, a model system for biofilm formation was established to study the initial attachment phase of bacteria in dependency of ageing, quality and surface modification of thermoplastic polymers used for storage tank systems. The microbial survey is closely connected with a detailed characterization of the material’s properties and its ageing processes.
A widely applied plastic used for fuel storage tanks is high-density polyethylene (PE-HD), which is available with various additives to increase UV-light stability and even for the storage of biodiesel. These materials were aged under UV-light and temperature using a defined climate chamber set-up. Further, the repeated filling of fuels was mimicked for such storage tanks, as this has an important impact on the life-cycle length for the storage Container. The aged polymers showed a significant change in the material’s characteristics, including surface characteristics (e.g. hydrophobicity) and carbonyl groups. The effect of the changed material properties on the biofilm formation are studied using bacterial isolates, previously obtained from a “dieselpest”, and as a model-reference E. coli. The unaged polymers showed already some significant differences for the initial attachment of E. coli K12. Polyethylene with additives was colonized faster than the reference material (without additives) although the final biofilm coverage was not impaired. Likewise, the settlement of a kerosene-isolated Bacillus species on the unaged materials independently of additives was only minor interfered.
In future, our results should give stakeholders in industry and public authorities a better estimation of the life-cycle security for fuel storage tank systems and on the fuel quality. Further, our results could help to test and develop new materials or additives to prevent biofouling processes.
Polynuclear aluminium species (Al13 keggin cluster) find application in different areas like water purification, contaminant transport, and as pilling clays with high specific surface areas, due to their strong binding ability to aggregates and high positive charge.
In the present contribution, we report on the in situ investigation of the Al13 sulfate synthesis by synchrotron wide-angle X-ray scattering (WAXS). Al13 cluster were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using a custom-made acoustic levitator as sample holder. The study provides information about the intermediates during the crystallization process. From the data, a mechanism was derived indicating the influence of the crystallization process.