Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2017 (2) (entfernen)
Dokumenttyp
- Sonstiges (1)
- Forschungsbericht (1)
Sprache
- Englisch (2)
Referierte Publikation
- nein (2)
Schlagworte
- Hazardous substances (2) (entfernen)
The test methods UN Test L.2 / EN ISO 9038:2013 DIN EN 15188:2007 are applied to characterize the sustained combustibility of liquids i.e. the behaviour of a material under specified test conditions, whereby its vapour can be ignited by an ignition source and sufficient flammable vapour is produced to continue burning for at least 15 s after the source of ignition has been removed.
The aims of this interlaboratory test (IT) are the verification and/or the improvement (if necessary) of the verification data (reference material) in Annex B of EN ISO 9038:2013, the assessment of influencing (disturbing) factors (laboratory specific factors, which possibly may have an influence on the test result) and the assessment of the performance of the participating laboratories.
It could be demonstrated that the reference materials n-Dodecane, n-Decane and n-Undecane as mentioned in the standard are suitable and the verification shall continue to be valid.
Sustained combustibility tests are influenced by several factors like the presence of a draught shield, the experience of the laboratory assistant, verification of the apparatus, calibration of the metering device.
Based on the interlaboratory test, the gained experience and the actual results, well-founded measures / actions can be recommended to improve execution of the method.
The IT was organized by PTB, BAM and QuoData GmbH in the framework of the co-operation project CEQAT-DGHS Centre for Quality Assurance for Testing of Dangerous Goods and Hazardous Substances.
The use of renewable energy technologies, such as photovoltaics (PV) should be sustainable and environmentally compatible and therefore protect the environment from risks and damaging impacts. Regarding the growing number of installed photovoltaic systems, the end-of-life management of the pv-modules will become increasingly important. Thin film panels contain hazardous substances that may harm the environment if they are not recycled or disposed properly after reaching the end of their service life. Heavy metals, for example, can be toxic as well as carcinogenic or teratogenic. Processing methods for the recycling of PV thin film modules have to take these facts into account. Currently the available recycling techniques usually utilise chemicals such as acids for a wet-chemical treatment of end-of-life modules. The aim of RESOLVED was to identify and test alternative methods for a wet-mechanical treatment in order to reduce the consumption of chemicals in the recycling of thin film modules. Furthermore, the recovered Cadmium-Telluride (CdTe) and Copper-Indium-Diselenide/Disulfide (CIS) should be helping to save scare resources especially for limited elements such as tellurium and indium. The project RESOLVED investigated the recovery of semiconductors material as secondary raw material and the decontamination of the residues of the PV thin film modules. These goals were achieved by testing and optimising existing technologies for the recycling process as well as for the enrichment of the semiconductor materials. The target is to re-use the enriched recovered material in the production of new PV modules. Special efforts were made to look into life cycle analysis, process sustainability, economical aspects, and resource availability.