Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2017 (6) (entfernen)
Dokumenttyp
- Vortrag (4)
- Beitrag zu einem Tagungsband (1)
- Posterpräsentation (1)
Sprache
- Englisch (6)
Referierte Publikation
- nein (6)
Schlagworte
- Composite (6) (entfernen)
Eingeladener Vortrag
- nein (4)
Atomic force microscopy based Infrared spectroscopy (AFM-IR) is a quickly evolving technique that provides chemical analysis and compositional mapping with spatial resolution far below conventional optical diffraction limits. This is possible since the detection method is based on a very sharp AFM tip which starts to oscillate when the sample starts to thermally expand (the changed is caused by the absorption of IR wavelength) where the thermal expansion is related to the IR absorption. This presentation briefly described the application of that new technique from polymer characterization and utilization of AFM-IR in material research, up to life science applications.
An extraction of silica from natural sands of Bancar has been conducted by means of alkali fusion route using NaOH and mechanical alloying using planetary ball milling. The PANI/SiO2 Composite system has been coated in steel surfaces using spraying method. This study was designed to obtain PANI/SiO2 as an anti-corrosion coating material. The filler materials in the composite System consist of micro- and nano-SiO2. The structure of synthesized SiO2 be characterized using XRD and TEM. Corrosion of PANI/SiO2 composite has been tested using immersion method in synthetic geothermal atmosphere (Nord Deutsche Becken/NDB solution). The surface morphology after corrosion was observed by using SEM/EDX. XRD-Patterns and TEM show that the size of produced SiO2 is micro and nano. The size and composition of filler have influenced to surface degradation in geothermal atmosphere significantly. The addition of nano-SiO2 in the PANI matrix influenced corrosion resistance better than micro-SiO2 filler qualitatively. The nano-SiO2 has a high potential as an anti-corrosion material in geothermal atmosphere. The product of corrosion is mainly Fe2O3 and the corrosion process is identified as a pitting corrosion.
In this study, quasi-static material tests on unidirectional and multi-angle glass fiber reinforced epoxy laminates at ambient temperatures from -213 K to 353 K (-60 °C to +80 °C) are performed. In addition, neat resin is investigated under tension and compression loads at different temperatures. The coefficient of thermal expansion is determined for neat resin and unidirectional reinforced specimens. The dependence of the resin’s thermomechanical properties on the ambient temperature is shown. The point of damage onset at which first cracks appear within the matrix under quasi-static loading is investigated by means of optical grey scale analysis. The correlation between damage onset and effective matrix stress at different ambient temperatures is identified. An approach for the calculation of thermomechanical loads and the prediction of the damage onset by means of inverse calculations is presented. The impact of the strain blocking effect of the matrix is considered as well as residual thermal stresses due to curing and resin shrinkage.
In this study, quasi-static material tests on unidirectional and multi-angle glass fiber reinforced epoxy laminates at ambient temperatures from -213 K to 353 K (-60 °C to +80 °C) are performed. In addition, neat resin is investigated under tension and compression loads at different temperatures. The coefficient of thermal expansion is determined for neat resin and unidirectional reinforced specimens. The dependence of the resin’s thermomechanical properties on the ambient temperature is shown. The point of damage onset at which first cracks appear within the matrix under quasi-static loading is investigated by means of optical grey scale analysis. The correlation between damage onset and effective matrix stress at different ambient temperatures is identified. An approach for the calculation of thermomechanical loads and the prediction of the damage onset by means of inverse calculations is presented. The impact of the strain blocking effect of the matrix is considered as well as residual thermal stresses due to curing and resin shrinkage.
The application range of CPV (composite pressure vessels)
is multifaceted. But also the failure forms and the spectrum of measurement methods is manifold. On various, at BAM observed effects, it is shown why the micromechanical analysis of the composites is of such great interest for the prediction of aging effects of CPVs.
Partially crystalline glasses are predominantly used as solid oxide fuel cell (SOFC) sealants due to their superior long term durability. However, cracks caused by thermal cycling still remain a substantial bottleneck in developing durable SOFC sealants inasmuch as, in contrast to crystal free glasses, large crystal volume fractions can retard healing. Hence, the basic understanding of crack healing in glassy crystalline materials and the effects of micro structure are important for finding optimum micro structures for both, durability and crack healing.
For studying these effects, several model glass matrix composites (GMC), for which simultaneous crystal growth and crack healing can be excluded, have been synthesized. Sodium calcium silicate glass – zirconia GMC turned out to provide sufficiently homogeneous, dense and durable model GMC for our studies. The microstructure of this GMC shows large crystal free glassy regions embedded in network of finely dispersed ZrO2 nanoscale crystals. Whereas the glassy regions allow easy local crack healing, the network of dispersed crystals increases the effective viscosity on a global scale. This effect substantially retards crack broadening during later healing stages, which often ends up in large pores. Therefore, this type of microstructure seems to be an interesting candidate for crack healing optimized sealants.