Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
- 2017 (157) (entfernen)
Dokumenttyp
- Beitrag zu einem Tagungsband (157) (entfernen)
Sprache
- Englisch (104)
- Deutsch (52)
- Portugiesisch (1)
Schlagworte
- Korrosion (7)
- Wear (6)
- Eigenspannungen (5)
- Friction (5)
- Microstructure (5)
- Wärmebehandlung (5)
- CFK (4)
- Zerstörungsfreie Prüfung (4)
- Additive manufacturing (3)
- CCS (3)
- Coarsening (3)
- Degradation (3)
- EPR (3)
- Fire (3)
- Gel-type electrolytes (3)
- Gelartige Elektrolyte (3)
- Hardness (3)
- NbC (3)
- Nichtrostender Stahl (3)
- Reliability (3)
- Simulation (3)
- Standards (3)
- TPU (3)
- Additive Manufacturing (2)
- Ageing (2)
- Aktive Thermografie (2)
- Baustoffe (2)
- Bewitterung (2)
- CCUS (2)
- CO2 corrosion (2)
- Carbon steels (2)
- Cermet (2)
- Composite materials (2)
- Computer simulation (2)
- Concrete (2)
- Corrosion (2)
- Corrosion resistance (2)
- Corrosion testing (2)
- Creep (2)
- Cutting tools (2)
- Deckschichtbildung (2)
- Emerging technologies (2)
- Fatigue (2)
- Fatigue strength (2)
- Finite element method (2)
- Fireworks (2)
- Formaldehyde (2)
- GFK (2)
- HPC (2)
- HSC (2)
- Hydrogen (2)
- J-integral (2)
- Kaltverfestigung (2)
- KorroPad (2)
- Korrosionsprüfung (2)
- Laser dispersing (2)
- Laser implantation (2)
- Laser metal deposition (2)
- Layer formation (2)
- Magnetic domains (2)
- Martensitischer nichtrostender Stahl (2)
- Mechanical properties (2)
- NDT (2)
- NMR (2)
- Niobium carbide (2)
- Niobium carbide (NbC) (2)
- Plastic deformation (2)
- Polymer optical fibre (2)
- Rubber (2)
- S-phase (2)
- Schweißen (2)
- Seal (2)
- Surface structuring (2)
- TEM (2)
- ThermoCalc (2)
- Thermografie (2)
- Ti-6Al-4V (2)
- Ultra-high performance concrete (2)
- Zinc coatings (2)
- Zinkdeckschichten (2)
- Zuverlässigkeit (2)
- 316L (1)
- 3D Printing (1)
- 3D-Formbestimmung (1)
- 3D-Printing (1)
- 3D-Scanner (1)
- AKR (1)
- Abbott (1)
- Abplatzen (1)
- Abrasion (1)
- Accelerated concrete prism test (1)
- Accuracy (1)
- Acoustic levitator (1)
- Additiv (1)
- Additive (1)
- Additive Fertigung (1)
- Adhesion (1)
- Adhäsion (1)
- Admixtures (1)
- Advanced high strength steels (1)
- Aerospace materials (1)
- Aged biodiesel (1)
- Aged heating oil with 10% biodiesel (B10) (1)
- Alkali-silica reaction (1)
- Alloy 2618A (1)
- Alterung (1)
- Aluminium alloy 2618A (1)
- Ambient vibration tests (1)
- Aperture focusing (1)
- Apha-alumina (1)
- Application (1)
- Aquifer (1)
- Arc sensor (1)
- Archäometie (1)
- Artificial third body (1)
- Artificial weathering (1)
- Asperities (1)
- Ausgangsriss (1)
- Austenitische Stähle (1)
- Austenitizing (1)
- Authorisation (1)
- Autoclaved aerated concrete (1)
- Automation (1)
- Automatisierung (1)
- Azodicarbonamid (1)
- BPR (1)
- Back scatter imaging (1)
- Bauteilprüfung (1)
- Beschichtung (1)
- Betontechnologie (1)
- Biocidal Products Regulation (1)
- Biodiesel (1)
- Bioethanol (1)
- Bitter method (1)
- Blasting (1)
- Brake friction materials (1)
- Brand (1)
- Brandschutz (1)
- Brillouin (1)
- Bruchmechanik (1)
- Building Materials (1)
- Building materials (1)
- Building product (1)
- CLP (1)
- CO2 (1)
- CO2-storage (1)
- CTOD (1)
- CTW test (1)
- CTW-Test (1)
- Carbon (1)
- Carbon Fber Reinforced Polymers (1)
- Carbon storage (1)
- Cement (1)
- Chemical composition (1)
- Chromverarmung (1)
- Chrush (1)
- Co-planar translational laminography (1)
- Coherent Rayleigh OTDR, (1)
- Coil winding (1)
- Cold cracking (1)
- Colloidal processing (1)
- Compatibility (1)
- Component Testing (1)
- Composite (1)
- Composite panels (1)
- Composite pressure vessel (1)
- Composite-Druckgefäß (1)
- Composite-Druckgefäße (1)
- Compression behaviour (1)
- Condensate (1)
- Condensation (1)
- Constitutive law (1)
- Continuous monitoring (1)
- Contrast Noise Ratio (1)
- Core-rim (1)
- Corrosion fatigue (1)
- Crack Detection (1)
- Crack propagation (1)
- Crack resistance curve (1)
- Cracking (Materials) (1)
- Cracking susceptibility (1)
- Crevice corrosion (1)
- Critical strain (1)
- Curative wood preservatives (1)
- Cutting material (1)
- Cutting tool (1)
- DIN 50100 (1)
- DSS (1)
- Damage (1)
- Damage onset (1)
- Dangerous goods packaging (1)
- Dark-field transmission electron microscopy (DFTEM) (1)
- Data-fusion (1)
- Deconvolution (1)
- Deflagrationen (1)
- Deflagrationsgeschwindigkeit (1)
- Deformation (1)
- Diagonal compression tests (1)
- Dichtung (1)
- Die-cast aluminum (1)
- Diffraction (1)
- Digital image corelation (1)
- Digital radiography (1)
- Digitalisierung (1)
- Distributed acoustic sensing (1)
- Distributed sensing (1)
- Distributed vibration sensing (1)
- Druckanstiegsrate (1)
- Druckversuch (1)
- Ductile cast iron (1)
- Duplex stainless steel (1)
- Duplexstahl (1)
- Durability (1)
- Dynamic characterisation (1)
- Dynamic loading (1)
- E-Modul (1)
- EBSD (1)
- ECHA (1)
- Earthen materials (1)
- Edge effects (1)
- Einstufung (1)
- Elastomer (1)
- Electrochemistry (1)
- Electromagnetic influence (1)
- Elektrochemisches Rauschen (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Emission chamber testing (1)
- Emission test chamber (1)
- Emissivität (1)
- Energetic systems (1)
- Equivalent volumetric heat source (1)
- Ermüdung (1)
- Expansion modelling (1)
- Explosive spalling (1)
- Explosives (1)
- Extensometer (1)
- Externally loaded test (1)
- FEM (1)
- Fatigue standardisation (1)
- Ferrofluid (1)
- Ferromagnetischer Stahl (1)
- Festigkeit (1)
- Feuchte (1)
- Feuchtetransport (1)
- Fiber reinforced plastics (1)
- Fiber sensors (1)
- Fibre melt (1)
- Finite Elemente Methode (1)
- Finite elements analysis (1)
- Firestone (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Foam tiles (1)
- Fracture (Process) (1)
- Fracture mechanics (1)
- Friction spot welding (1)
- GMAW (1)
- GMR (1)
- Gaps (1)
- Gas pressure sintering (1)
- Gefahrgut (1)
- Gefahrstoff (1)
- Geothermal energy (1)
- Gepulste Thermografie (1)
- Geschlossenes System (1)
- Gitterinterferometrische Röntgenabbildung (1)
- Glasanalysen (1)
- Guidance (1)
- Haftfestigkeit (1)
- Hard materials (1)
- Hard metal (1)
- Heat control (1)
- Heißbemessung (1)
- Heißriss (1)
- Heißrissresistenz (1)
- High power laser beam welding (1)
- High voltage cable accessories (1)
- Higher-strength steels (1)
- Hochfeste Feinkornbaustähle (1)
- Hochleistungsbeton (1)
- Holzschutz (1)
- Hot cracking test (1)
- Hot steam (1)
- Human factors (1)
- Hydrogen assisted cracking (1)
- Hygrothermal behaviour (1)
- IN718 (1)
- ISO 12106 (1)
- ISO 12111 (1)
- ISO 15686 (1)
- IUCLID (1)
- Impuls-Anregungsmethode (1)
- In situ (1)
- In-situ Zugbelastung (1)
- Inconel 686 (1)
- Inconel 718 (1)
- Influence (1)
- Initial hydration (1)
- Innovation (1)
- Irradiation (1)
- Kaltrisse (1)
- Klimawandel (1)
- Korrosionsschutz (1)
- Korrosionsschutzpigmente (1)
- Kunststoffe (1)
- Kurzfaserverstärktes Polyamid (1)
- Kurzzeit-Fouriertransformation (1)
- Künstliche neuronale Netze (1)
- LCA (1)
- LTCC technology (1)
- Laboratory method (1)
- Laser (1)
- Laser Metal Deposition (1)
- Laser beam Welding (1)
- Laser beam welding (1)
- Laser cladding (1)
- Laser processing (1)
- Laser-Metal-Deposition (1)
- Laser-Pulver-Auftragschweißen (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Laserstrahl-(Hybrid)schweißen (1)
- Laserthermografie (1)
- Latin Hypercube (1)
- Leakage (1)
- Lichtbogensensorik (1)
- Life span (1)
- Life time prediction (1)
- Limestone filler (1)
- Liquid crystals (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Lochkorrosion (1)
- Lock-in (1)
- Lock-in Thermografie (1)
- Low carbon steel (1)
- Low cycle Fatigue (1)
- Low cycle fatigue (1)
- Low temperature (1)
- Low-temperature (1)
- Luftultraschall (1)
- MAG-Schweißen (1)
- MSG-Schweißen (1)
- Machining (1)
- Magnesium (1)
- Martensitic stainless steel (1)
- Masonry tower (1)
- Material (1)
- Material properties (1)
- Material ranking (1)
- Materialcharakterisierung (1)
- Materialschutz (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Mehrfachriss (1)
- Metal forming tools (1)
- Metal sulphies (1)
- Metall-Matrix-Komposite (1)
- Micro cracking (1)
- Microbiological investigation (1)
- Modal analysis (1)
- Modalanalyse (1)
- Moisture clog (1)
- Moisture transport (1)
- Moving mesh (1)
- Narrow-gap welding (1)
- Neural network (1)
- Neutron diffraction (1)
- Neutron imaging (1)
- Neutron radiography (1)
- Neutron tomography (1)
- Neutronenstreuung (1)
- Ni (1)
- Nickel (1)
- Niobium Carbide (NbC) (1)
- Non-destructive testing (1)
- Non-linear vibration (1)
- Nondestructive Testing (1)
- Nonel (1)
- Numerical modelling (1)
- Nässe (1)
- OECD (1)
- OSB (1)
- Oberflächenbearbeitung (1)
- Optical connector (1)
- Optical layer analysis (1)
- Optical measurement technique (1)
- Optical properties of dielectric materials (1)
- Overlay (1)
- PT8 (1)
- Partial discharge detection (1)
- Particle board (1)
- Particle erosion (1)
- Pendelstrategie (1)
- Penetration (1)
- Phased Array Ultraschall (1)
- Phasengitter (1)
- Photo-oxidation (1)
- Photocatalysis (1)
- Photogrammetry (1)
- Photon counting detectors (1)
- Photothermisch (1)
- Phänomenologisch (1)
- Pipeline transport (1)
- Pointwise constraints (1)
- Polyamide (1)
- Polycarbonate (1)
- Polyester fabric strips (1)
- Polyethylene (1)
- Polyethylene terephthalate (1)
- Polymer optical fibers (1)
- Polymethyl methacrylate (1)
- Polypropylen fibres (1)
- Polyurethan (1)
- Porosity reduction (1)
- Portland cement (1)
- Preventive wood preservatives (1)
- Probabilistic Analysis (1)
- Probabilistic analysis (1)
- Probability of detection (1)
- Process chain (1)
- Process optimization (1)
- Production technology (1)
- Prüfmethode (1)
- Prüfmethoden (1)
- Pulverbettbasiert (1)
- Q+P (1)
- Qualitätssicherung (1)
- Quasi-distributed sensing (1)
- Qulitätssicherung (1)
- REACH (1)
- RF components (1)
- Rammed earth (1)
- Rayleigh scattering (1)
- Recovery (1)
- Refill friction stir spot welding (1)
- Regelwerke (1)
- Registrierungsdossiers (1)
- Reibung (1)
- Reinheitsgradbestimmung (1)
- Residual Stress (1)
- Residual lifetime (1)
- Residual stress (1)
- Residual stresses (1)
- Resistance spot welding (1)
- Resonanzmethode (1)
- Reversed austenite (1)
- Ringversuch (1)
- Risserkennung (1)
- Rissfortschritt (1)
- Rubber seal (1)
- Rutherford cable (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktions-Radiographie (1)
- Röntgenverfahren (1)
- S-N curve (1)
- S31266 (1)
- SEM analysis (1)
- SEP-1220-3 (1)
- SIEF (1)
- Schadensentwicklung (1)
- Scherbelastung (1)
- Schmierstoffe (1)
- Schweißsimulation (1)
- Schweißstruktursimulation (1)
- Schwingfestigkeit (1)
- Sealing materials (1)
- Sectioning Method (1)
- Seismic assessment (1)
- Selektive Laserschmelzen (1)
- Selektives Laserschmelzen (1)
- Self-healing (1)
- Self-restraint test (1)
- Shear behaviour (1)
- Shear-compression tests (1)
- Shells (1)
- Shock wave (1)
- Shore hardness (1)
- Silicone rubber (1)
- Simulations (1)
- Single crystal (1)
- Sintering (1)
- Size effect (1)
- Soil-pile interaction (1)
- Solidification cracking (1)
- Solution doping (1)
- Spalling (1)
- Spektrale Bestrahlung (1)
- Spiralstrategie (1)
- Spruce (1)
- Spurgröße (1)
- Stabilising agent (1)
- Stainless Steel (1)
- Stainless steel (1)
- Standardization (1)
- Steam (1)
- Steel (1)
- Steels (1)
- Stern Geary constant (1)
- Stern-Geary-Konstante (1)
- Stickstoff (1)
- Strahlen (1)
- Strain error (1)
- Strain gradients (1)
- Streifenlichtprojektion (1)
- Strengthening (1)
- Stress corrosion cracking (1)
- Stress cracking resistance (1)
- Structural simulation (1)
- Structure-property relationship (1)
- Struktur-Eigenschaftsbeziehung (1)
- Stähle (1)
- Stählen (1)
- Super-austenitic stainless steel (1)
- Superalloy (1)
- Surface functionalization (1)
- Synchrotronbeugung (1)
- THz-TDS (1)
- THz-ToF (1)
- TIG weld (1)
- TRC (1)
- Talbot-Lau Interferometrie (1)
- Tank materials (1)
- Technological innovation (1)
- Temperature (1)
- Temperature behavior (1)
- Temperature fluctuation (1)
- Temperaturentwicklung (1)
- Tensile properties (1)
- Test setup (1)
- Thermografische Qualitätsprüfung (1)
- Thermography (1)
- Thermomechanics (1)
- Thermomechanisch (1)
- TiC (1)
- Time resolution (1)
- Titanium-di-boride (1)
- ToF-SIMS (1)
- Tool wear (1)
- Transient heat transfer (1)
- Tribofilme (1)
- Tumbling (1)
- Tungsten carbide (WC) (1)
- Tunnel (1)
- Turbine industry (1)
- Turning trials (1)
- UHPC (1)
- UV (1)
- UV radiation (1)
- UV-Bestrahlung (1)
- Ultra high strength steels (1)
- Ultra-High Performance Concrete (UHPC) (1)
- Ultraschalltauchtechnik (1)
- Ultrasonic testing (1)
- Ultrasound (1)
- VCSEL (1)
- Vacuum (1)
- Validierung (1)
- Verbundfestigkeit (1)
- Viskoplastizität (1)
- Volltransient (1)
- Waethering (1)
- Wasserstoffbedingte Eigenschaftsdegradation (1)
- Water repellence (1)
- Wear behaviour (1)
- Wear mechanisms (1)
- Welding (1)
- Wirbelstromprüfung (1)
- Wood (1)
- Wälzreibung (1)
- Wärmeführung (1)
- X-Ray Diffraction (1)
- X-ray CT (1)
- X-ray Imaging (1)
- X-ray absorption tomography (1)
- X-ray diffraction (XRD) (1)
- X-ray imaging (1)
- ZFP Schweißnaht Ultraschall (1)
- Zentrifugentechnologie (1)
- ZfP (1)
- Zinc (1)
- Zink (1)
- Zugbelastung (1)
- Zugversuch (1)
- aktive Thermografie (1)
- analytische Zentrifuge (1)
- autoclaving (1)
- heat treatment (1)
- hochfeste Feinkornbaustähle (1)
- numerische Simulation (1)
- Überkritisch (1)
The plastic deformation results in irreversible microstructure changes in the steel, which can be considered as the initial stage of the fracture process. However, detecting, monitoring and evaluating, damage states and small defects non-destructively in advance still proves challenging. It was reported in literature the phenomenon of the spontaneous emergence of weak magnetic fields in structural steels and pipelines, which originates due to heterogeneous mechanical and / or thermal stresses. This observation is not associated with induced phase transformations by deformation and appears to be a promising tool for the prior characterization of damage in ferromagnetic steels. To provide a better understanding of the physical bases of the process, the magnetic microstructure of such materials and the change of magnetic domains after undergoing plastic deformation were studied. For this purpose, a colloidal solution with paramagnetic particles in the nanometer scale (ferrofluid) was used, through the Bitter technique, in order to, not only observe a change in size of the magnetic domains of the material, but also changes in their morphology. Ferritic steels with different carbon contents (0.08%; 0.22% and 0.45%) were studied in this work.
The present paper provides a discussion on all these topics and it offers solutions for it. The authors present an analytical solution of a Delta J based crack driving force based on an R6 type approach but modified for cyclic loading. The gradual build-up of the crack closure effect is modelled by the so-called cyclic R curve which describes the crack size dependency of the fatigue crack propagation threshold in the short crack regime. It is explained how the cyclic R curve is experimentally determined and how it can be estimated by a modified Kitagawa-Takahashi approach.
In modernen Stahlkonstruktionen werden immer häufiger hochfeste Feinkornbaustähle erfolgreich eingesetzt. Dies resultiert aus dem aktuellen Bestreben, leichte Komponenten zu fertigen und damit die Energie- und Ressourceneffizienz zu steigern. Die Herausforderungen an die Auslegung und Herstellung geschweißter Bauteile nimmt jedoch mit steigenden Festigkeiten und abnehmenden Dehnungsreserven der eingesetzten Werkstoffe zu. So können hohe Schweißeigenspannungen die Beanspruchbarkeit und Bauteilsicherheit kritisch herabsetzen. Untersuchungen zeigten bereits deutliche Einflüsse von Werkstoff, Wärmeführung sowie Schweißprozessparametern und der um-gebenden Konstruktion der Schweißnaht auf den Beanspruchungszustand geschweißter Bauteile. Der Einsatz moderner modifizierter Sprühlichtbogenprozesse (mod.SLB) gestattet in diesen Zusammenhang neben den bekannten wirtschaftlichen Vorteilen das Schweißen einer deutlich schmaleren Nahtgeometrie. Aufgrund des resultierenden reduzierten Gesamtwärmeeintrages sind deutlich geringere schweißbedingte Beanspruchungen und eine höhere Beanspruchbarkeit hochfester Schweißkonstruktionen erreichbar. Unter Nutzung spezieller Prüfanlagen konnten mehrlagige Schweißexperimente zur Analyse des Einflusses der Nahtgeometrie auf die Eigenspannungsausbildung und Gesamtbeanspruchung hochfester Schweißverbindungen bei bauteilähnlichen Einspannbedingungen durchgeführt werden. Für die reduzierten Nahtvolumina zeigte sich eine signifikante Absenkung des Beanspruchungsniveaus während des Schweißens und nach der Abkühlung.
A two-dimensional numerical mesoscale model has been created representing a microstructure of a typical 2205/1.4462 duplex stainless steel to further elucidate the mechanisms of hydrogen-assisted crack initiation and propagation in multiphase non-hydride forming metallic microstructures. Hydrogen-assisted cracking (HAC) was simulated by considering different stress and strain behavior as well as different diffusion behavior in both phases. For simulation of crack initiation and propagation, the element elimination technique has been applied. The model allows the simulation of path-free crack propagation which contributes to a better understanding of the HAC process in two-phase microstructures. As a particular result, the analyses revealed that a global macroscopic elastic deformation might already cause plastic deformation in both phases entailing respective HAC.
The work presents the effects of the change of the laser cladding parameters on microstructure, chemical composition and mechanical properties of Inconel 686 overlays (coatings). To obtain the best quality of These coatings the various parameters of laser cladding such as the power density of the laser beam, the laser beam velocity and overlapping ratio of the weld tracks were applied. The substrates were boilers plate made of the 13CrMo4-5 steel. Ni - base alloys characterize by the excellent high-temperature corrosion resistance, good strength and good ability to work in aggressive environments. This could be achieved by the reduction of the substrate melting and its dissolution into the overlays. The microstructure, chemical composition of the obtained overlays were investigated by means of a light microscope, a scanning electron microscope (SEM) equipped with the EDS detector. The overlays had cellular-dendritic structure. The variations of the chemical composition (especially Mo, Ni and W ) in the interdendritic and dendritic regions were observed. The interdendritic regions were enriched during solidifications in Mo and W and had lower content of Ni.
A 30GHz liquid-crystal-based amplitude tuner is proposed for the first time. The amplitude of a signal can be controlled by using the interference principle. An input signal is divided into a tunable liquid crystal phase shifter and a fixed transmission line. Later, the divided signals are combined together at the output port. The output amplitude depends on the phase difference between the tunable and the fixed line. The low temperature co-fired ceramic technology is utilized to fabricate the device. The measurement shows an attenuation range of 11 dB to 30 dB with a maximum biasing voltage of 100V.
The ageing of Fe-Cr model alloys in 0.5 % SO2 and 99.5 % Ar atmosphere was investigated to aim in a fundamental and systematic analysis of the combined oxidation and sulfidation mechanism. The crystallization and reaction paths for oxide and sulfide formation were followed in-situ by energy dispersive X-ray diffraction (EDXRD) in an early stage of corrosion (30 s – 24 h). For this technique, high energetic white synchrotron X-ray radiation (10-100 keV) was used as radiation source. Diffraction pattern were collected continuously in an early stage of corrosion up to 24 h during the complete ageing experiment.
The crystalline phases, growing on top of the coupons, were identified directly via their specific dhkl values. The evolution of the extracted integral intensities of specific reflections of the corrosion products as a function of time access direct information about the kinetics of the nucleation and growth. The results presented here show for iron with 2 wt% Cr wuestite formation first. Wuestite vanishes after 10 min of reaction only and magnetite and hematite appear. Magnetite formation proceeds simultaneously with sulfide formation. Sulfides growth proceeds after an incubation time, which differs for low alloyed (2 wt% Cr) and high alloyed (9 wt% Cr) material.
Zur Effizienzsteigerung beim Einsatz von Lichtbogenverfahren für Fügeaufgaben im Dickblechbereich werden häufig angepasste Verfahren mit möglichst geringer Nahtquerschnittsfläche angewendet, beispielsweise das MSG-Engspaltschweißen für I-Nähte. Die Herausforderung für die Automatisierung des Verfahrens besteht neben der komplexen Prozessführung auch in der oftmals schlechten Zugänglichkeit der Prozesszone für optische Sensorik, weswegen verstärkt auf prozessorientierte Sensorik zurückgegriffen wird. Zur Steigerung des Prozessverständnisses und Entwicklung neuer Regelungskonzepte wurde ein Versuchsaufbau umgesetzt, der sowohl optische Messsysteme als auch prozessorientierte Sensorik in einer gemeinsamen Steuerungsumgebung vereint. Die umfassende prozessbegleitende Sensorik ermöglicht die sukzessive Erweiterung des Prozesswissens, welches direkt zur Umsetzung neuer Steuer- und Regelalgorithmen basierend auf Regressionsmodellen genutzt werden kann. Der gemeinsame Einsatz optischer und prozessorientierter Sensorik wurde zur Auslegung eines Lichtbogensensors zur Höhenführung genutzt. Die Versuchsdurchführung mit dem Ziel der Ableitung nichtlinearer Regressionsmodelle erfolgt automatisiert mit Hilfe eines optischen Sensors. Der Vorteil dieses Verfahrens liegt dabei neben der schnellen Umsetzbarkeit in der direkten Korrelation der Messwerte zu realen physikalischen Systemgrößen und der schnellen Adaption auf unterschiedliche Schweißparameter und -prozesse.
An approach to develop an arc sensor for gap-width estimation during automated NG-GMAW with a weaving electrode motion is introduced by combining arc sensor readings with optical measurement of the groove shape to allow precise analyses of the process. The two test specimen welded for this study were designed to feature a variable groove geometry in order to maximize efficiency of the conducted experimental efforts, resulting in 1696 individual weaving cycle records with associated arc sensor measurements, process parameters and groove shape information. Gap width was varied from 18 to 25 mm and wire feed rates in the range of 9 to 13 m/min were used in the course of this study. Artificial neural networks were used as a modelling tool to derive an arc sensor for estimation of gap width suitable for online process control that can adapt to changes in process parameters as well as changes in the weaving motion of the electrode. Wire feed rate, weaving current, sidewall dwell currents and angles were used as inputs to calculate the gap width. Evaluation the proposed arc sensor model show very good estimation capabilities for parameters sufficiently covered during experiments.
Die transiente nichtlineare 3D-Wärmeleitungsgleichung wurde zur numerischen Lösung mittels der Finite-Elemente-Methode im Ort und mittels explizitem Eulerschema in der Zeit diskretisiert. Der resultierende Algorithmus wurde in ein Computerprogramm überführt wobei besonderer Wert auf paralleles Rechnen gelegt wurde. Das Programm wurde auf die numerische Berechnung eines schweißtypischen transienten Temperaturfelds angewandt. Die Rechenzeit und Skalierbarkeit des Computerprogramms bezüglich der Anzahl verwendeter CPU Kerne wurde untersucht und mit dem kommerziellen FEM Programm Abaqus 6.14 verglichen. Die Anwendung der expliziten Zeitintegration resultiert in verbesserter Skalierbarkeit bezüglich der Anzahl verwendeter CPU Kerne und Rechenzeitersparnis gegenüber der in Abaqus implementierten impliziten Zeitintegrationsmethode.
Proben mit einer Mittelkerbe aus Polyamid 66 mit 35% Gewichtsan-teil an Kurzglasfaser (PA-GF35) wurden im Spritzgießverfahren hergestellt und in einem ungeschädigten und durch Schwingbeanspruch geschädigten Zustand mittels Röntgenverfahren charakterisiert. Sowohl die Faserorientierungsverteilung als auch die Riss-/Mikrorissbildung wurden mit der Röntgenrefraktionstopographie in einem SAXS-Aufbau und dem Diffraction-Enhanced-Imaging am Synchrotron (BESSY II) analysiert. Beide Verfahren spiegeln in guter Übereinstimmung die Charakteristiken dieser Werkstoffklasse in Bezug auf die Fertigungsqualität und die Schädigungsme-chanismen wider.
Laser metal deposition is described with its applications for additive manufacturing. The necessary process chain is discussed, with regard to weld bead dimensions and 3D build-up strategy. Metallurgical cross sections, x-ray and tensile tests are conducted. As demonstrative components, a gas turbine burner and a turbine blade are shown.
Additive Manufacturing provides an important enabling technology for the digital transformation of the economy. As an emerging technology it has seen a remarkable development over the last three decades. Nevertheless, it is far from a broad adoption with several barriers to overcome yet. One of the major challenges is the lack of standards. The critical role of standardization for innovation is generally recognized, still the topic too often has been neglected in strategic roadmapping exercises for emerging technologies. Too little is known about the complex dynamics and interrelations of standardization and innovation. The anticipation of standardization needs and the timely and efficient implementation of standards is challenging. This paper aims at contributing to a better understanding of the role that standards play in the multi-dimensional system of innovation. It analyzes the trajectories of innovation in Additive Manufacturing in a systematic and holistic way, focusing on standardization activities with regard to coordination, stakeholders involved, the timing and types of standards developed. Putting standardization in context of the multi-dimensional innovation system of Additive Manufacturing the research shows where standards can support the diffusion of an emerging technology.
Das Fügeverfahren Kleben bietet viele Vorteile, wie das Verbinden verschiedener Materialklassen und eine Lastverteilung über den gesamten Fügebereich, und erfordert schnelle Prüfverfahren zur Ermittlung von Verbundeigenschaften.
Das Messprinzip CAT-Technologie® (Centrifugal Adhesion Testing) verwendet die radial gerichtete Zentrifugalkraft als Belastungsgröße, die durch programmierbare Variation der Drehzahl statisch oder dynamisch vorgegeben wird. Bei Erreichen der kritischen Beanspruchung trennt sich der Prüfstempel vom Substrat, zeitgleich wird ein positionsbezogenes Signal aus dem drehenden Rotor gesendet und zusammen mit der Drehzahl an die PC-Software übertragen. Für jede Probe wird die Bruchkraft berechnet und in Echtzeit angezeigt. Der Adhesion Analyser LUMiFrac® untersucht simultan bis zu acht Prüfkörper unter identischen Bedingungen. Das neue Messprinzip erfüllt die Anforderungen von DIN EN 15870, DIN EN 14869-2 und ISO 4624.
Neben der Festigkeitsbestimmung von Klebverbindungen ist die Haftung von Schichtsystemen ein weiterer wichtiger Anwendungsbereich. Ergebnisse für Zug- und Scherbeanspruchung, realisiert mit unterschiedlichen Prüfkörper-Layouts, werden vorgestellt und Festigkeit beeinflussende Faktoren, wie Prüfgeschwindigkeit oder Substratverformung bei Beanspruchung, werden aufgezeigt. Die Charakterisierung von Klebebandeigenschaften über die Möglichkeiten der Schälprüfung hinaus wird gezeigt. Des Weiteren werden experimentelle Ergebnisse durch zyklische Belastung (Ermüdung) im Vergleich zu Stan-dard-Tests diskutiert.
Die Analyse der Lebensdauer von Bauteilen unter thermomechanischer Ermüdung (TMF) erfordert ein geeignetes Stoffgesetz, welches in der Lage ist, zyklische Plastizität die Abhängigkeit der Spannungsantwort nach der Dehnrate, Kriechen und Spannungsrelaxation temperaturabhängig zu beschreiben und ein Lebensdauermodell, welches in Abhängigkeit von der örtlich aufgelösten Spannungs- und Verformungsgeschichten eine Schätzung der Anzahl der Zyklen bis zum Anriss liefern kann.
Bei der Bewertung der Verlässlichkeit der im Labor gewonnenen Prüfergebnisse spielen Ringversuche eine entscheidende Rolle. Die Bundesanstalt für Materialforschung und –prüfung (BAM) unterstützt deshalb den weiteren Ausbau des Ringversuchsprogramms des im Jahr 2007 gegründeten Kompetenzzentrums zur Qualitätssicherung für Prüfungen von Gefahrgütern und Gefahrstoffen auf physikalische Gefahren (Centre for quality assurance for testing of dangerous goods and hazardous substances, CEQAT-DGHS).
Bei allen bisher untersuchten Prüfmethoden besteht ein Verbesserungsbedarf. Die RV müssen daher zunächst auf die Methodenentwicklung, -verbesserung und -validierung und auf die Bestimmung der Messunsicherheit der jeweiligen Prüfmethode abzielen und nicht auf Leistungstests.
Vergleichende Bewertung verschiedener Verfahren der E-Modulbestimmung für metallische Werkstoffe
(2017)
Für numerische Beanspruchungs- und Lebensdaueranalysen ist die Kenntnis des E-Moduls der eingesetzten Werkstoffe von zentraler Bedeutung. Für seine experimentelle Bestimmung wurden eine Vielzahl von Verfahren entwickelt, die zum Teil werkstoffspezifisch Eingang in die Normung gefunden haben. Prinzipiell können diese Verfahren in zwei Gruppen eingeteilt werden - die statischen und die dynamischen Prüfverfahren. Während die statischen Verfahren auf der direkten Messung des Spannungs-Dehnungs-Zusammenhangs während einer Belastung im elastischen Verformungsbereich beruhen (Zug-, Biege- bzw. Druckversuch) nutzen die dynamischen Verfahren die Analyse der resultierenden Schwingungen nach einer entsprechenden Anregung eines Prüfkörpers (Resonanz- bzw. Impulsanregungsmethode). Für verschiedene Werkstoffe wurden statische und dynamische Verfahren zur E-Modulbestimmung eingesetzt. Die Unterschiede und Vorteile der verschiedenen Verfahren werden vergleichend diskutiert.
Der globale Handel mit Holz, als Rohware, Verpackungsholz, Mobiliar oder Kulturgut haben dazu beigetragen, dass einige Termitenarten eine weltweite Verbreitung erfahren haben. Ob sich eine Art in einem neuen Habitat erfolgreich etabliert, hängt dabei von vielen Faktoren ab. Für Termiten ist die Temperatur ein entscheidender Faktor. In Deutschland ist die Gefahr, dass Termiten ein regelmäßiger Bestandteil der Fauna werden, in naher Zukunft und trotz Klimawandels nicht zu erwarten. Es sind nicht die Jahresmitteltemperaturen, sondern die für Termiten extremen Minusgrade mit Bodenfrost im Winter – und sei es nur über ein paar Tage –, die ihr nachhaltiges Vorkommen verhindern. Nur unter bestimmten synanthropen Bedingungen treten Termiten gelegentlich in Deutschland in Erscheinung, wie die wenigen Beispiele zeigen
The increased application of higher-strength steels and filler materials necessitates a more profound understanding of the interactions between the welding process, the heat input, the cooling conditions and the resulting metallurgical processes in the weid and its surroundings. Strategies, which help to improve the strength properties and life-time of welded stmctures to such an extent that the utilisation of higher-strength materials can be justified and their lightweight construction potential can thus be exploited to the füll, can only be derived from the interaction between all the influencing factors. Examples of a few investigations on welded joints between higher-strength fine-grained structural steels with regard to the interactions between the main variables influencing the cold cracking are presented in this article.
Magnesium (Mg) alloys have attracted much attention due to their merits of meeting requirements of lightweight, energy-efficient and environmental friendly engineering. In this study, a modified refill friction stir spot welding (refill-FSSW) method is proposed to weid AMSO Mg alloy, in which pin and sleeve rotate at different states. Effects of process parameters on the microstructure, material flow, and mechanical properties of welds were studied. Results showed that, the modified refill-FSSW technology could enhance the intennixing of material by changing the flow state. Lap shear strength of welds could be significantly improved with changed failure modes. The modified refill FSSW technology is a competitive welding method for Mg alloy.
The safe joining of new, freshly developed steel types keeps challenging the industry–and is assumed to go on in doing so. In the body-in-white production, these materials are mainly joined using resistance spot welding. During the past ten years, various investigations on resistance spot welding of advanced high strength steels have been carried out at Fraunhofer IPK and the Federal Institute for Materials Research and Testing (BAM). This paper aims to give an overview about both the top former and recent studies and results. The investigated topics are the influences of manufacturing conditions as initial gaps and restraints on spot welds, their impact on the fatigue strength of a joint and the cracking-wise safe weldability of AHSS.
Caused by non-ideal manufacturing conditions, cracks in spot welds (e.g. caused by liquid metal embrittlement) are still regarded as a potential risk in industrial practice. Therefore, a method to evaluate the safe weldability regarding the cracking susceptibility was developed for AHSS. The method is easy to perform, even without expensive laboratory equipment. It allows the end user to establish a material ranking regarding the cracking susceptibility of the handled steels. Recently, coupled thermo-mechanical finite element modelling has been used to describe critical stress-strain conditions responsible for the occurrence of liquid metal embrittlement, and to improve the understanding of the process.
Chemical admixtures are widely used to adjust properties of the cementitious mixtures. Different superplasticizers (SP) are typically added to improve the flowability of the fresh cement paste. Their working period is the initial stage of the cement hydration from its beginning until stiffening. Currently, polycarboxylate-based SP (PCE-SP) are the most effective ones. They can act beyond their aimed function causing changes in the hydration course, e. g. retardation effects. The exact mechanisms and influencing factors are still under investigation. However, the occurrence of the retardation effect indicates the involvement of PCE in the hydration reactions. Some observations indicate, that the retardation depends on the type, molecular structure and concentration of PCE, and the presence of other admixtures (stabiliser, ST). These factors influence further the working time of admixture and its amount related efficacy in the flow improvement.
We investigate the cement hydration process in situ in levitated droplets. High resolution synchrotron X-ray diffraction allows gathering temporal course of the hydration reactions. The measurement setup is based on an ultrasonic levitator allowing in situ investigation of the temporal changes of the phase composition in the hydrating cementitious system. Further, the hydration can be followed ab initio avoiding the time loss for the sample preparation and filling in the sample holder. The collected data allows to conclude about the mechanisms of the admixture action and their involvement into the ongoing hydration process.
Im Bereich der optisch angeregten Thermografie haben sich Blitzlampen (impulsförmig-flächige Erwärmung) und Halogenlampen (moduliert-flächige Erwärmung) für die spezifischen Regime Impuls- und Lockin-Thermografie etabliert.
Mittels eines rasternden fokussierten Lasers wird die Flying-spot Laserthermografie z.B. zur Risserkennung (Dauerstrichbetrieb) und die photothermische Materialcharakterisierung (hochfrequent moduliert)implementiert. Durch die Verfügbarkeit neuer Technologien (schnelle und hochauflösende IR-Kameras, brillante innovativer Lichtquellen und performante Datenakquisitions- und Verarbeitungstechnik) wird ein Paradigmenwechsel von den getrennt voneinander stehenden photothermischen und
thermografischen Techniken hin zu einer einheitlichen quantitativen Mess-und Prüftechnik ermöglicht, die schneller und präziser ist. Ähnlich wie ein LED-Array, jedoch mit einer um zwei Größenordnungen höheren Bestrahlungsstärke, steht jetzt eine neuartige brillante Laserquelle, das VCSEL-Array (vertical-cavity surface-emitting laser) zur Verfügung, welches die starke Beschränkung der zeitlichen Dynamik der etablierten Lichtquellen aufhebt und gleichzeitig spektral sauber von der Detektionswellenlänge getrennt ist. Es vereint somit das schnelle zeitliche Verhalten eines Diodenlasers mit der hohen optischen Bestrahlungsstärke und dem großen Beleuchtungsbereich von Blitzlampen. Darüber hinaus kann die Erwärmung auch strukturiert vorgenommen werden, da einzelne Bereiche des VCSEL-Arrays unabhängig voneinander angesteuert werden können. Dieser neue Freiheitsgrad ermöglicht die Entwicklung ganz neuer thermografischer ZfP-Verfahren.
Vorhersage zur Bauteilmaßhaltigkeit bei der additiven Fertigung mittels Schweißstruktursimulation
(2017)
Ziel bei der Anwendung von Schweißstruktursimulation in der additiven Fertigung ist die Anzahl an notwendigen Experimenten bis zur Erreichung von Maßhaltigkeit und gewünschter Bauteilqualität zu reduzieren. Für die Laser-Metal-Deposition besteht durch die im Vergleich zu pulverbettbasierten Verfahren größeren Auftragsraten und Spurgrößen - die Möglichkeit, schon heute volltransiente thermomechanische Simulationen für kleine Bauteile durchzuführen. Da das Bauteil nicht von Pulver umschlossen ist, kann im Prozess die Wärmeverteilung und der Bauteilverzug gemessen werden.
In diesem Vortrag wird der Arbeitsablauf beim additiven Aufbau einer kleinen Struktur aus Inconel 718 demonstriert. Im Experiment werden die Temperaturverteilungen mittels Thermoelementen sowie der Verzug der Bodenplatte durch einen Laserabstandssensor gemessen. Die phänomenologische Wärmequelle in der Simulation wird anhand von Temperaturmessungen und Querschliffen kalibriert und der mechanische Verzug der Basisplatte wird mit in-situ Messwerten abgeglichen.
Abschließend wird die Rechenzeit des Modells bewertet und gezeigt wie die Simulation die Bauteilqualität vorhersagen kann.
Die Weiterentwicklung des Laser-Pulver-Auftragschweißens im Bereich der additiven Fertigung stellt dieses Verfahren vor neue Herausforderungen.
Bauteile können schnell und endformnah hergestellt werden, was diese Technik für den Prototypenbau sowie Kleinserienfertigung interessant macht.
Die Vielzahl an Varianten, um ein Volumen aus einzelnen Schichten aufzubauen, erhöhen die Möglichkeiten die Eigenschaften des entstehenden Bauteils zu beeinflussen. Hierfür müssen Strategien entwickelt werden, welche einen gleiclunäßigen Materialauftrag bei gleichzeitig optimalen Materialeigenschaften gewährleisten.
Die durchgeführten Untersuchungen behandeln den Einfluss von Pendelstrategien sowie Spiralstrategien auf die Temperaturentwicklung und stellen diese vergleichend gegenüber. Um den unterschiedlichen Bedingungen bei der Bauteilfertigung Rechnung zu tragen, wurden Versuche in Randbereichen sowie im zentralen Bereich des Testobjekts untersucht. Die Ergebnisse verdeutlichen die Notwendigkeit angepasste Baustrategien zu entwickeln, um durch einen stabilen Fertigungsprozess Qualität und Eigenschaften eines Bauteils gewährleisten zu können.
Mit nicht-konformen oder schlecht dokumentierten Prüfergebnissen können weder Behörden noch Unternehmen etwas anfangen. Belastbare und eindeutige Informationen aus den Registrierungsdossiers sind entscheidend, damit industrielle und gewerbliche Verwender der Stoffe das Gefahrenpotenzial einschätzen und ggf. Maßnahmen zum Schutz von Menschen und Umwelt treffen können.
Darüber hinaus benötigen die Behörden verlässliche Daten aus den Registrierungen, um ihrer Verantwortung bei der Identifizierung regulierungsbedürftiger Stoffe nachkommen zu können.
It is known that the spalling risk of dense, high-strength concretes (HSC) can be reduced by the addition of polypropylene (PP) fibres and, in particular, PP-fibres that have been pre-treated using electron irradiation. It is presumed that the enhanced reduction in spalling resulting from electron irradiation pre-treatment of the fibres can be attributed to enhanced penetration of the molten fibre material into the micro-cracks around the fibres, due to their significantly decreased viscosity. So far there has been no experimental evidence for this. Against this background, this paper gives a com-parative analysis of the mode of action of PP-fibres with and without pre-treatment using multi-scale test methodology.
Initially, fire tests on small-scale building components with accompanying damage monitoring veri-fied that the amount of PP-fibres can be halved by using pre-treated PP-fibres without reducing the fire performance of HSC. Detailed investigations of PP-fibres carried out in a completed research project funded by DFG (the German Research Foundation) using digital scanning calorimetry and thermogravimetry measurements (DSC/TG) as well as viscometer measurements showed that the pre-treatment has no significant influence on the melting temperature of the PP-fibres. However, a drastic reduction of the melt viscosity due to the electron irradiation was detectable. Additional dila-tation tests showed that the expansion behaviour of both fibre types and their melts do not differ significantly [1]. Rather, both fibre types generate high pressures when their thermal expansion is hindered. Further detailed investigations by means of continuous heating tests with a low heating rate were carried out on separately produced concrete cylinders. These tests showed that the pre-treatment of the PP-fibres causes earlier dehydration in conjunction with stagnation of thermal expansion of the concrete cylinders (temperature reduction from 180 °C to 170 °C). This is accompanied by in-creased acoustic emission activity during the thermal expansion tests. This leads to the assumption that the pre-treatment of PP-fibres results in earlier micro-crack development. However, it was not possible to confirm this assumption by microscopic examination of drilling cores with a diameter of 30 mm exposed to defined temperatures in the range between 150°C and 300°C. Microscopic obser-vations and additional X-ray 3D computed tomography (3D-CT) scans on miniaturised drilling cores exposed to temperature cycles showed a similar networking of fibre beds by means of micro-cracks in HSC for both fibre types. However, energy dispersive X-ray spectroscopy and wavelength disper-sive X-ray spectroscopy revealed fundamental differences in the penetration capacity of the fibre melts of the two fibre types. The increased penetration of the pre-treated PP-fibre melt revealed in these tests, confirms the initial working hypothesis.
Unilateral thermal exposure of concrete building components induces moisture transport processes that have a significant influence on the spalling behaviour of dense high-strength concrete (HSC). These transport processes are based on evaporation and condensation mechanisms of liquid and gaseous water in the pores as well as the chemically bound water within the concrete. The low permeability of HSC and the formation of a saturated zone within building components (also known as a moisture clog) leads to high water-vapour pressures, which contributes to explosive spalling. The formation of these pressures has already been verified by means of pore-pressure measurement techniques. In addition, the redistribution of the moisture within concrete specimens subject to unilateral thermal exposure has been demonstrated on fractured surfaces. Investigations by means of the nuclear magnetic resonance (NMR) relaxometry technique and neutron radiography have shown one-dimensional changes in moisture distribution during thermal exposure.
However, none of these methods has been able to depict the moisture distribution in three dimensions (3D), so the link between pore size, concrete micro-structure and moisture content is missing. The research project presented in this paper aims to fill this gap by developing a new multi-level test methodology to characterise non-destructively the temporal course of spatial moisture distribution during unilateral thermal exposure. The procedure used during this programme included the collection of X-ray 3D-computed tomography (CT) measurements using a miniaturised specimen subjected to in-situ thermal exposure and the comparison of those CT results with the results of one-dimensional NMR-relaxometry before and after the heating process.
In the first step, a mobile heating device was developed, built and tested. To simulate a unilaterally-heated construction component, a cylindrical specimen made of HSC (Ø = 40 mm, L = 100 mm) was cast into an impermeable glass ceramic shell. The ceramic shell ensured a one-dimensional moisture flux and limited the thermal expansion of the concrete. An additional high-temperature wool (HTW) insulating shell ensured a one-dimensional heat flux. The heating device, which operated using infrared radiation (IR), allowed the unilateral heating of the specimens up to 300 °C using variable heating regimes.
In the second step, the mobile heating device was integrated into the CT-scanner, which enabled the collection of measurements before, during and after heating. By subtraction of successive 3D-CT images, X-ray attenuation differences could be resolved three-dimensionally in the specimen and interpreted as changes in the moisture content.
Initial results show that this test methodology can monitor the 3D changes of moisture content inside the specimen during thermal exposure. It enables the researcher to visualise areas with moisture accumulation as well as dehydrated areas inside the specimen. Comparative one-dimensional NMR-relaxometry measurements confirm the results of the CT image analysis.
Die Schicht-für-Schicht additive Fertigung (AM) in Form des selektiven Laserschmelzens (SLM) bietet einerseits Vorteile bezüglich des Probendesigns, andererseits sind thermische Eigenspannungen (ES) aufgrund des hohen Temperaturgradienten unvermeidbar. Diese Eigenspannungen wurden in zwei SLM-gefertigten Proben aus IN718 zerstörungsfrei mit Neutronenstreuung hinsichtlich der folgenden zwei Einflüsse analysiert: der Einfluss der Hatch-Länge und das Abtrennen des Werkstücks von der Bauplatte. Begleitet wurden die Messungen der Eigenspannungen durch optische Mikroskopie und die taktile Vermessung der Oberfläche. Eine Korrelation zwischen den Eigenspannungen und der Hatch-Länge konnte beobachtet und erklärt werden.
The purpose of the work presented in this paper is to analyze locally (at the element level) the contact behavior of a soil-pile contact problem. Therefore, a 2D shear test is modeled using the Finite Element Method. The formulation of a 4 nodded zero-thickness interface element of Beer is chosen with a linear interpolation function. Four constitutive contact models adapted for contact problems have been implemented. The Mohr-Coulomb and Clough and Duncan models were chosen initially, due to the ease of implementation and few number of parameters needed. After, more complicated models in the framework of elasto-plasticity such as: Lashkari and Mortara were implemented for the first time into the finite element code of the shear test problem. They include other phenomena such as: relative density of soil, the stress level and sand dilatancy. From the results the relation between shear displacement and shear stress has been deduced. Finally, a discussion of the advantages and the drawbacks during computation of each model is given at the end.
CCUS-Technologie (CO2-Abtrennung; Nutzung und Speicherung, engl. Carbon Dioxide Capture, Utilization and Storage) gilt als eine vielversprechende Methode zur Abschwächung des Beitrags von fossilen Emissionen zur globalen Erwärmung. Dabei wird das in den Verbrennungsprozessen entstandene Treibhausgas aufgefangen, zu verschiedenen Lagerstätten transportiert und langzeitig gespeichert bzw. einer chemischen Nutzung zugeführt.
In bisher veröffentlichten Untersuchungen wurde gezeigt, dass die CO2-Transport-Pipelines in hohem Maße gefährdet sind, wenn sie korrosiven Begleitstoffen des CO2-Stroms, wie SOx, NOx bei einem hohen Wasserdampfanteil ausgesetzt sind. Screening-Tests zeigten, dass bei einer Konzentration von 1000 ppmv H2O die Reaktionen und Kondensation von SO2 und NO2 mit O2 und H2O zu Säuretropfen (pH ~ 0,5) auf der Oberfläche von Metall-Prüfkörper und Gefäß führen. Die Werkstoffe 1.0582, 1.8977, 1.4313 und 1.4562 wurden in CO2-gesättigtem Kondensat mit unterschiedlichem Verhältnis der säurebildenden Komponenten untersucht. Diese Studien zeigten grundsätzlich den Mechanismus sowie die Rolle jedes CO2-Strom-Begleitstoffes auf den Korrosionsprozess. Allerdings spiegeln die bei Auslagerung und elektrochemischen Messungen in der künstlichen CO2-gesättigten Kondensat-Lösung auftretenden Bedingungen nicht im Detail die Realität in der Praxis, wo sich nur Tröpfchen bilden, wider.
Diese Arbeit konzentriert sich auf den Korrosionsprozess von Kondensat in Form von Tröpfchen, auf der Oberfläche von Rohrleitungswerkstoffen unter CO2-Atmosphäre bei 5 °C (Simulation des Transportzustandes). Die Experimente wurden nicht nur für Auslagerungsversuche, sondern auch für elektrochemische Tests mit nur einem Tröpfchen (weniger als 20 µL) konzipiert. Die Auslagerungs-versuche wurden sowohl unter Normaldruck als auch bei hohem Druck (> 70 bar) durchgeführt, wobei das CO2 als dichte – den Tropfen umgebende - Phase vorliegt. Die korrodierten Prüfkörper wurden rasterelektronenmikroskopisch (REM) und mittels Energiedispersiver Röntgenspektroskopie (EDX) analysiert, um nicht nur Korrosionsform, sondern auch die Elementverteilung der Korrosionsprodukte zu zeigen.
A probabilistic approach for finite element analysis (FEA) for tunnel linings exposed to the nominal fire is presented. The probabilistic FEA accounted for the uncertainties distributions tied to the conductivity and specific heat as well as of the compressive strength, tensile strength, Young’s modulus, and ultimate strain in compression. To get an understanding on the influence of different probability density functions on the distribution of maximum displacements of the tunnel lining, a sensitivity analysis was performed. Four sets of FEAs were carried out with different probability distributions of the conductivity, the specific heat, and the compressive strength of the concrete, respectively. An experimental design based on a Latin Hypercube Sampling algorithm was performed to define the input parameters which describe each analysis case. A reliability analysis was executed considering a limit state function based on the temperature-dependent ultimate strain. The results show that, depending on the distribution adopted, the standard deviation of the maximum displacements can vary up to 47,4% of the minimum standard deviation. The large standard deviation is associated with the possibility of a greater displacement and, hence, to a structure more vulnerable to fire.
Laser metal deposition (LMD) has been applied as coating technology for many years. Today, the technologies capacity to produce 3D depositions leads to a new field of application as additive manufacturing method. In this paper, 3D laser metal deposition of titanium alloy Ti-6Al-4V is studied with special regard to the demands of additive manufacturing. Therefore, only the powder nozzle is used to create the shielding gas atmosphere, which ensures high geometric flexibility. Furthermore, specimen with high aspect ratio and hundreds of layers are manufactured, which represent typical features in additive manufacturing.
Elastomer seals are widely used as barrier seals in containers for low and intermediate level radioactive waste. In addition, they are also used in waste fuel storage and transportation casks as auxiliary seals. Depending on the area of use, the rubber materials have to demonstrate proper sealing performance with respect to mechanical, thermal and environmental conditions as well as irradiation during the entire operation period. A fundamental understanding of the structure property relationship and their changes during aging can help to evaluate the long-term sealing performance.
In the present study, specific materials are investigated to study the structure-property and seal performance-correlation. Fluoro-elastomer (FKM), silicone rubber (VMQ) and ethylene propylene diene rubber (EPDM) were chosen as base rubbers. Comparable mechanical properties for these seals, especially in terms of a comparable compression behavior were achieved by careful control of base rubber formulation, i.e., by opting for the right filler and its concentration, amount of crosslinking chemicals, and with the assistance of process oils. Moreover, with the same rubber, similar mechanical properties were achieved by varying the filler concentration and crosslinking degree, which shall enable to correlate the particular influence on the structure property dependency of the seals in detail. The materials are investigated under pristine and aged conditions to evaluate the influence of aging, e.g. on the stress relaxation or recovery behavior. These values appear to be suitable parameters to judge the expected sealing performance.
Due to the electrically conducting nature of some fillers used to reinforce rubbers (such as carbon blacks, carbon nanotubes (CNTs), Graphene, etc.) it is possible to obtain current information about mechanical and visco-elastic properties by monitoring the electrical conductivity or resistivity. A simple relation that relates electrical resistance with mechanical stress was derived and the stress values were theoretically predicted from the electrical resistance values, which showed good correlation with experimental results.
For many sealing applications low temperature performance is required. The overall understanding of the relevant influences on low temperature performance of rubber seals are summarized and the currently running investigations described.
The correlation of the physical material properties with seal performance is studied. This includes as well purely static sealing applications as the performance during/after fast partial relief of seals at low temperatures.
Einfluss der Alterung auf dichtungsrelevante Eigenschaften von FKM-, VMQ- und EPDM-Elastomeren
(2017)
Da Elastomere in vielfältigen Dichtungsanwendungen eingesetzt werden und dabei teilweise großen Einfluss auf die Funktionsfähigkeit und Sicherheit haben, ist der Einfluss der Alterung auf dichtungsrelevante Eigenschaften relevant. Eine strukturierte Untersuchung des Einflusses von verschiedenen Mischungsrezepturen auf die Bauteileigenschaften, das Alterungsverhalten und die Funktion wird vorgestellt.
In this paper, titanium-di-boride is dispersed on a cold-working tool steel by use of a pulsed fiber laser with high beam quality to produce separated and elevated surface features. The potential to adjust the geometry as well as the mechanical properties of the produced structures in dependence on the process parameters (pulse power, pulse duration) is described by means of metallographic and topographical investigations. It can be ascertained that very hard (hardness > 1000 HV1) surface features of different shape (spots and short lines) can be produced. They are characterized by a fine-grained microstructure resulting from a rapid solidification and finely dispersed TiB2 particles. Finally, the paper proposes different applications for this structuring technique.
Classical film radiography is a well-established NDT technique and it is most commonly used for testing weld seams and corroded pipes e.g. in oil and gas industry or in nuclear power plants. In the course of digitization, digital detector arrays (DDA) are finding their way into industrial applications and are replacing film radiography step by step. This study deals with the latest generation of DDAs, the photon counting and energy resolving detectors (PCD), and their characteristics compared to charge integrating detectors (CID). No matter which technology to use, radiography still lacks a general issue: A three-dimensional object is projected onto a two dimensional image. Of course, advanced computed tomography (CT) algorithms exist since many years, but if the object to investigate is too large to fit into the manipulation system or its shape is not appropriate, CT is not feasible or sensible to be applied. To overcome this limitation, numerous laminographic algorithms have been developed in the past. In this study, photon counting detectors are used in combination with co-planar translational laminography to gain reconstructed three-dimensional volumes. Both laminographic testing and PCDs require a serious knowledge of many parameters that can influence the image quality in the resulting datasets. These are e.g. the detector efficiency and calibration procedure, setting of energy thresholds, exposure data, number of projections, beam length correction and spatial resolution. The use of PCDs yields more variables to be considered compared to CIDs. The most important parameters in laminographic testing and in the use of PCDs are described in this study and limits are discussed.
Laser Metal Deposition offers the chance to build near net shape parts. The temperature evolution within the process has an influence on track and layer geometries. There are special travel path strategies required to produce near net shape components and reduce shape deviation resulting of error propagation.
This paper deals with the temperature progression of individual layers and the maximum heating of deeper substrate regions. Spiral and zig-zag strategies are examined. The investigations are carried out using S235JR as substrate and 316L as powder material. The influence of different strategies on temperature evolution is discussed.
The results from the experiments show that various production strategies are associated with different temperature fields. Furthermore, the extent of the temperature variations of layer strategies and layer position are strongly dependent on the production direction. These results demonstrate the importance of developing suitable build-up strategies for parts of complex shape to ensure a stable process with constant temperature as well as even layers.
Within a current research project which is funded by the German Research Foundation (DFG) the influence of the size and the geometry of specimens on the spalling result in fire tests is going to be investigated at Bundesanstalt für Materialforschung und -prüfung (BAM). This paper describes some preliminary results and a newly developed test setup. The novel setup enables the efficient and precise quantification of spalling by using a special photogrammetric measurement system.
Bei der additiven Fertigung können sich während des Prozesses aufgrund von hohen Aufheiz- und Abkühlraten Eigenspannungen ausbilden, die potentiell zu einem Verzug von Bauteilen führen und sich negativ auf das mechanische Verhalten auswirken. In dieser Studie wurden Ti-6Al-4V Proben durch Selektives Laserschmelzen mit verschiedenen Lasergeschwindigkeiten additiv gefertigt, um die Auswirkung der Laserenergiedichte auf den Eigenspannungszustand zu untersuchen. Die oberflächennahe Eigenspannungsanalysen wurden mittels energiedispersiver Synchrotronbeugung durchgeführt. Insgesamt wurden hohe Zugspannungen an den Seitenflächen der Proben gefunden. Es wurde festgestellt, dass je höher die Laserenergiedichte während der Fertigung ist, desto geringer fallen die Eigenspannungen aus. Eine nachträglich durchgeführte Wärmebehandlung führt zu einem vollständigen Abbau von Eigenspannungen.
High resolution ToF-SIMS imaging of deuterium permeation and cracking in duplex stainless steels
(2017)
Fundamental understanding and elucidation of hydrogen assisted degradation and trapping mechanisms is dependent on sufficient imaging techniques for respective hydrogen interactions, in particular with multi-phase metallic microstructures. The present work shows the progress in elucidating the deuterium behavior in austenitic-ferritic duplex stainless steels under the consideration that deuterium behaves in many ways similarly to hydrogen. A novel combination of deuterium permeation and in-situ Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) imaging technique is compared with post charging ToF-SIMS imaging experiments. As a step beyond state-of-the-art, integration of chemo-metric and high resolution structural characterization techniques with computational multivariate data analysis (MVA) and data fusion is presented.
Experimental determination and analysis of dynamic fracture toughness data of ductile cast iron
(2017)
Ductile Cast Iron materials (DCI) have become important structural materials. Neverthe-less, to draw maximum benefit from DCIs property potential, tailored testing methods must be provided. The established dynamic Jd-R and CTOD 5d-R curve procedures are based on material specifically developed, independent experimental techniques but pro-vide almost matching results. This can be seen as additional validation of the Jd procedure which was mandatory.
Transient Process Simulation of Heat Transfer in Laser Beam Welding with an Equivalent Heat Source
(2017)
This paper presents a multiphysics modelling framework developed for the prediction of the three-dimensional transient temperature field of the laser welding process. The numerical model consists of two studies. In the first study, a steady-state CFD process simulation of full-penetration keyhole laser beam welding was performed. Considering the effects of, thermo-capillary and natural convection, latent heat of fusion and temperature-dependent material properties up to evaporation temperature the local weld pool geometry and temperature field were obtained. These results were used in the second subsequent study as an equivalent volumetric heat source by the prediction of the transient thermal cycle during and after fusion welding. Here the energy input and the movement of the heat source were realized by a novel technique, making use of pointwise constraints and a moving mesh provided with helper lines and additional remeshing condition. The numerically calculated results were compared to experimentally observed weld pool shapes and time-temperature curves showing a very good agreement.
The paper presents a comparison between different numerical modelling approaches aiming to simulate the in-plain behaviour of three types of earthen materials, namely adobe masonry, rammed earth and cob. For this purpose, uniaxial and diagonal compression tests were carried out, which allowed determining important mechanical parameters, such as compressive strength, Young’s modulus, Poisson’s ratio, shear strength and shear modulus. Furthermore, the tests allowed assessing the level of non-linear behaviour of the respective stress–strain relationships as well as the failure modes. The experimental results were then used for the calibration of numerical models (based on the finite element method) for simulating the non-linear behaviour of the earth materials under in-plane shear loading. Both macro- and micro-modelling approaches were considered for this purpose. The procedures adopted for model calibration established the reliability of various modelling strategies for the different loading conditions. The simplified Approach based on macromodelling shows a satisfactory accuracy and low computational costs. The results reproducing the uniaxial compression are in good correspondence with the post-elastic behaviour observed in the experimental campaign. The micro-modelling approach adopted to reproduce the shear behaviour, even with higher computational cost, represents a suitable tool to predict the adobe masonry and rammed earth collapse mechanisms.
Quantitative Auswertemöglichkeiten bei der spektralen Bestrahlung – Berechnung des Wirkungsspektrums
(2017)
Für die Bewertung des Wellenlängeneinflusses auf die Alterungsvorgänge bei der Bestrahlung UV- oder lichtempfindlicher Materialien kann die Methode der spektralen Bestrahlung angewendet werden. Im Prinzip wird dabei das linear dispergierte Spektrum einer Strahlenquelle mit kontinuierlichem Spektrum (z.B. Xe-Lampe) auf eine Probenoberfläche abgebildet, so dass Ort einer Materialänderung und Wellenlänge der Bestrahlung einander zugeordnet werden können. Nachfolgende lokal-auflösende Analysemethoden ermitteln eine Eigenschaftsänderung an einem spezifischen Ort der Probe, aus dem sich dann die Bestrahlungswellenlänge ergibt.
Der verwendete Aufbau wird beschrieben. Es wird an einem ausgewählten Beispiel gezeigt, wie durch geeignete Anbindung eines Messsystems zur Bestimmung der spektralen Bestrahlungsstärke und ortsaufgelöste Messungen der Eigenschaftsänderungen eine quantitative Auswertung realisiert werden kann. Der Einfluss nichtlinearer Alterungsverläufe wird diskutiert. Grenzen der Methode werden aufgezeigt und Erweiterungsmöglichkeiten dargestellt.
A further improvement of the excellent properties of UHPC can be realized with thermal Treatment. Like for normal concrete, it accelerates the hardening and prevents shrinkage after the treatment. Additionally, an increase in strength can be achieved. Aim of this study was the optimisation of the thermal Treatment conditions of UHPC for very different Treatment methods; heat Treatment at 90 °C for unprotected and sealed samples, hot water bath at 90 °C and hydrothermal Treatment at 185 °C/1.1 MPa. The pre-storage time and the dwell time were systematically varied for each method to gain a higher strength. The compressive strength depends on the manner of Treatment at which higher water accessibility leads to higher strengths. The Phase composition changes considerably with different Treatment tempereatures. Finally, it can activate unhydrated binder components forming additional C-S-H, leading to higher strength.
In den letzten 15 Jahren hat im deutschen Autobahnnetz die Anzahl von Schäden an Betonfahrbahnen, die vor 2005 er-richtet wurden zugenommen. Dies führt oft zu einer Vermin-derung der Lebensdauer von 30 auf 10 bis 15 Jahre. Trotz umfassender Untersuchungen wurde die Ursache bis jetzt nicht eindeutig geklärt, jedoch scheint die Alkali-Kieselsäure-Reaktion (AKR) hierbei eine Rolle zu spielen. Vor diesem Hintergrund wurden AKR-Performance-Tests entwickelt, die jedoch die mechanischen Einwirkungen aus Klima und Ver-kehr nicht berücksichtigen. Aus diesem Grund wurde eine AKR-Forschergruppe von der Deutschen Forschungsgemein-schaft ins Leben gerufen, welche sich experimentell und auf Simulationsebene mit diesem Thema befasst. Inhalt dieses Beitrages sind ausgewählte Ergebnisse des an der BAM bear-beiteten experimentellen Projektteils, welche in eine auf die Auswirkung einer mechanischen Degradation fokussierte Promotionsarbeit einfließen.
Ziel der ausgewählten Untersuchung ist es, den Einfluss einer mechanisch induzierten Betondegradation auf den Stofftrans-port herauszuarbeiten. Hierzu wird ein großformatiger Balken einem zyklischen Vier-Punkt Biegezugversuch mit einer Anzahl von 5 Mio. Lastwechseln unterzogen. Während des Versuches findet ein Schadensmonitoring mit verschiedenen zerstörungsfreien Prüftechniken statt. Hierzu zählen Deh-nungsmessungen, Schallemissionsanalyse und Ultraschall-messungen (vgl. Bild 1). Nach dem zyklischen Belastungs-versuch werden kleinformatige Probekörper aus dem belasteten Balken entnommen. Als Referenz dienen unbelas-tete Probekörper aus der gleichen Herstellungscharge. Die Oberflächen der entnommenen Probekörper werden in einem kapillaren Saugversuch zum einen mit deionisiertem Wasser und zum anderen mit einer 3,6 %igen NaCl-Lösung beauf-schlagt. Während der Saugversuche dienen verschiedene zerstörungsfreie bzw. -arme Messmethoden dazu, die Feuch-teaufnahme bzw. -verteilung in den Probekörpern zu messen. Hierzu gehören neben der Gravimetrie die Messung mit NMR (Nuclear-Magnetic-Resonance) sowie TDR (Time-Domain-Reflectometry). Nach den Saugversuchen wird die Na- und Cl-Verteilung an den mit NaCl-Lösung beaufschlagten Pro-bekörpern zerstörend mittels LIBS (Laser-Induced-Breakdown-Spectroscopy) ermittelt. Erste Ergebnisse zeigen, dass die zyklische Ermüdungsdegradation den Stofftransport tendenziell verstärkt (vgl. Bild 2).