Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Vortrag (2)
- Zeitschriftenartikel (1)
Sprache
- Englisch (3)
Schlagworte
- Model (3) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
Single-crystal components made of nickel base superalloys contain pores after casting and homogenization heat treatment. Hot isostatic pressing (HIP), which is carried above the γ' -solvus temperature of the alloy, is industrially applied to reduce porosity. A modeling of HIP based on continuously distributed dislocations is developed in a 2D setting. Glide and climb of straight-edge dislocations, as well as vacancy diffusion, are the deformation mechanisms taken into account.
Thereby, dislocation glide is controlled by dragging a cloud of large atoms, and climb is controlled by vacancy diffusion. Relying on previous investigations of the creep behavior at HIP temperatures, it is assumed that new dislocations are nucleated at low-angle boundaries (LAB) and move through subgrains until they either reach the opposite LABs or react with other dislocations and annihilate.
Vacancies are created at the pore surface and diffuse through the alloy until they are either consumed by climbing dislocations or disappear at the LABs. The field equations are solved by finite elements. It is shown that pore shrinking is mostly controlled by vacancy diffusion as the shear stresses at the LABs are too low to
nucleate a sufficient amount of dislocations.
Microbiologically influenced corrosion (MIC) is an expensive but unpredictable problem for the industries. The most well-known culprit for MIC is the sulfate-reducing microorganisms (SRM), such as members from the genus Desulfovibrio. It has been widely accepted that SRM can contribute significantly to MIC through the production of hydrogen sulfide (HS-) or in some cases a direct electron uptake from the metal surface. However, in a real environmental system, SRM is not exclusive and often involved with other microorganisms that may also contribute to MIC, such as methanogens.
Methanogenic archaea can produce methane (CH4) using H2+CO2, formate, methylated amines or acetate. Methanogens are highly abundant in the environment and many are found in very extreme conditions, such as high temperature and high salinity. Previous researches have demonstrated that methanogens are capable of MIC, though the specific mechanisms are still under investigation. In the oil and gas industry, methanogens are not considered as the main contributor for MIC since the corrosion rates are often too low. However, the tests for methanogen-induced MIC are usually performed at static conditions, which cannot represent the system accurately. Here, we developed a novel anaerobic system to evaluate the corrosion potential of methanogens under flow conditions. We will use the Methanococcus maripaludis KA1 strain, which was isolated from a crude oil tank, as the organism of interest. A separate system for Desulfovibrio alaskensis will be established for corrosion rate comparisons. Furthermore, we will study the synergistic effects of M. maripaludis and D. alaskensis on MIC under flow.
The technological importance, the regularity of the microstructure and the complexity of the mechanical behavior of single crystal superalloys have motivated the development of a large number of mathematical models of the mechanical behavior of these alloys in the last two decades. While crystal viscoplasticity has proven to be an efficient framework to account for their anisotropy, several issues are still challenging. Indeed, most models consider that octahedral and cubic slip systems contribute to the largest part of the plastic deformation. However, the exact nature of cubic slip is still controversial and the precipitates can be sheared by <112> slip systems at intermediate temperatures, which largely influence the dependence of the flow rate on the orientation under creep conditions. Due to the different strengths of the matrix and the precipitates and the large volume fraction of the precipitate phase, a complex distribution of internal stresses exists, which can difficultly be captured by the conventional back stress models of plasticity. In addition, at high temperature, the microstructure degrades and the residual mechanical strength is reduced. The driving force for this microstructure degradation is intimately connected to the distribution of the internal stresses. As a result of this complexity, a large number of tests are usually required to fully characterize the mechanical behavior of single crystal superalloys. This in turn largely impedes the implementation of inelastic modeling in the industrial praxis.
The lecture summarizes the principal types of constitutive models for single crystal superalloys and reviews some recent advances in this area. In particular, it is shown how simulations at the microstructure scale level combined with conventional testing and microscopic analysis helped to improve our understanding of the mechanical behavior of single crystal superalloys. Directional coarsening, the importance of internal stresses, orientation dependency and the corresponding modeling issues are discussed. Also open questions are highlighted.