Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Posterpräsentation (780) (entfernen)
Sprache
- Englisch (648)
- Deutsch (131)
- Französisch (1)
Schlagworte
- Corrosion (36)
- Additive manufacturing (29)
- Mechanochemistry (24)
- Glass (20)
- Nanoparticles (19)
- Additive Manufacturing (17)
- Crystallization (17)
- Degradation (14)
- Fluorescence (14)
- In situ (14)
- Computed tomography (13)
- Residual stress (13)
- Korrosion (12)
- Biofilm (11)
- Hydrogen (11)
- Laser-induced periodic surface structures (LIPSS) (11)
- Microstructure (11)
- SAXS (11)
- Catalysis (10)
- Methanogens (10)
- Nanoparticle (10)
- Sintering (10)
- Thermography (10)
- X-ray refraction (10)
- Boehmite (9)
- Stainless steel (9)
- Cocrystal (8)
- Computed Tomography (8)
- KorroPad (8)
- Laser powder bed fusion (8)
- Quality assurance (8)
- AFM (7)
- Corrosion resistance (7)
- EPR (7)
- Heat treatment (7)
- Nichtrostender Stahl (7)
- PE-HD (7)
- Selective laser melting (7)
- Synthesis (7)
- 316L (6)
- Amorphous phases (6)
- Automation (6)
- Creep (6)
- DNA (6)
- Dosimetry (6)
- Electron microscopy (6)
- Femtosecond laser ablation (6)
- Geant4 (6)
- Heterogeneous catalysis (6)
- MIC (6)
- MOFs (6)
- Microdosimetry (6)
- Neutron diffraction (6)
- Oxidation (6)
- Phosphates (6)
- Polymer (6)
- Polymorphism (6)
- Prüfmethode (6)
- Qualitätssicherung (6)
- Simulation (6)
- ToF-SIMS (6)
- Welding (6)
- Aluminium (5)
- Archaea (5)
- C-F bond activation (5)
- Coarsening (5)
- DFT (5)
- Dielectric spectroscopy (5)
- Duplexstahl (5)
- Dye (5)
- FTIR (5)
- Gefahrgut (5)
- Gefahrstoff (5)
- LEE (5)
- Laser Powder Bed Fusion (5)
- Milling (5)
- Nanocomposite (5)
- Nanocomposites (5)
- Niobium carbide (NbC) (5)
- Polymorph (5)
- Quantum dot (5)
- Radiation damage (5)
- Reference material (5)
- Self-healing (5)
- Silver nanoparticles (5)
- Struvite (5)
- ThermoCalc (5)
- Thin films (5)
- Transition metal (5)
- Transmission electron microscopy (5)
- UHPC (5)
- Wear (5)
- XANES (5)
- Ageing (4)
- AlSi10Mg (4)
- AuNP (4)
- Bioactive (4)
- Composite-Druckgefäße (4)
- Concrete (4)
- Corrosion testing (4)
- Crack growth (4)
- DCB (4)
- DNA damage (4)
- Diesel (4)
- Digitalisierung (4)
- Discotic Liquid Crystals (4)
- Energy deposit (4)
- FAIR (4)
- Fatigue (4)
- Flexible crystals (4)
- Friction (4)
- Geant4-DNA (4)
- Graphene (4)
- Hardness (4)
- Hydrogen assisted cracking (4)
- Implants (4)
- Inconel 686 (4)
- Iron oxide nanoparticles (4)
- LIBS (4)
- Laser Beam Melting (4)
- Laser profilometry (4)
- Low energy electrons (4)
- MCS (4)
- Metal phosphonates (4)
- Microplastic (4)
- Monte-Carlo simulation (4)
- NMR (4)
- Nano (4)
- Nanoconfinement (4)
- Nanoplastic (4)
- Pitting corrosion (4)
- Polymers (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- Ringversuch (4)
- SEM (4)
- Spectroscopic ellipsometry (4)
- Steel (4)
- Sulfidation (4)
- Synchrotron (4)
- TEM (4)
- TiO2 (4)
- Tribology (4)
- Upconversion (4)
- Validierung (4)
- X-ray diffraction (4)
- XRD (4)
- 3D High-temperature shape screening (3)
- AM (3)
- Ab-initio (3)
- Additive Fertigung (3)
- Alloy 2618A (3)
- Assay (3)
- Bending modulus (3)
- Beta decay (3)
- Biodiesel (3)
- Bitumen (3)
- Bonding analysis (3)
- Brachytherapy (3)
- Cancer treatment (3)
- Carbon nanotubes (3)
- Cermets (3)
- Clustered nanoparticles (3)
- Coating (3)
- Computational Chemistry (3)
- Conductivity (3)
- Corundum grinding (3)
- Dangerous goods (3)
- Database (3)
- Diffusion coefficient (3)
- EBSD (3)
- Ellipsometry (3)
- Environmental Simulation (3)
- Epoxy (3)
- Flourescence (3)
- Flow cytometry (3)
- Glass ceramic (3)
- Glass composition (3)
- Gold Nanoparticles (3)
- Imaging (3)
- Korrosionsbeständigkeit (3)
- Korundschleifen (3)
- LCF (3)
- Laser cladding (3)
- Laser implantation (3)
- Livermore model (3)
- Luminescence (3)
- MIPs (3)
- Machine learning (3)
- Martensitic stainless steels (3)
- Materialcharakterisierung (3)
- Materials Informatics (3)
- Mesoporosity (3)
- Metallographie (3)
- Metrology (3)
- Microbial induced corrosion (3)
- Microbiologically influenced corrosion (3)
- Micropatterning (3)
- Microplastics (3)
- Microscopy (3)
- Monitoring (3)
- NDT (3)
- NP (3)
- NTE (3)
- Nanofibers (3)
- Nanomaterial (3)
- Nichtrostende Stähle (3)
- OECD (3)
- OER (3)
- OH radical (3)
- Oberflächenbearbeitung (3)
- Optical spectroscopy (3)
- Orientation (3)
- Oxygen Reduction Reaction (3)
- PGM-free catalyst (3)
- PXRD (3)
- Penelope model (3)
- Phase grating (3)
- Polydopamine (3)
- Polyethylene (3)
- Polymer blends (3)
- ProMoAM (3)
- Quantum dots (3)
- REACH (3)
- Radiation therapy (3)
- Radiolysis (3)
- Raman Spectroscopy (3)
- Reactive extrusion (3)
- Reference data (3)
- Residual Stress (3)
- Rigidity (3)
- Röntgenrefraktion (3)
- SLM (3)
- Sample preparation (3)
- Schadensanalyse (3)
- Schweißen (3)
- Sensibilisierung (3)
- Sialic acid (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- Specific heat spectroscopy (3)
- Strahlen (3)
- Surface chemistry (3)
- Synchrotron tomography (3)
- TDEP (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermoelectrics (3)
- Thin Films (3)
- Thin polymeric films (3)
- Ti-6Al-4V (3)
- Two-photon polymerisation (3)
- VSSA (3)
- Vickers (3)
- WAXS (3)
- Waveguide (3)
- Wärmebehandlung (3)
- X-ray fluorescence (3)
- XPS (3)
- ZCF (3)
- ZrF4 (3)
- particle scattering (3)
- 3D (2)
- AGIL (2)
- AIS (2)
- ATR (2)
- Absorption edge tomography (2)
- Adaptives Schweißen (2)
- Adsorbed Layer (2)
- Aktivkohle (2)
- Alkali-silica-reaction (2)
- Alterung von Pyrotechnik (2)
- Aluminium alloys (2)
- Aluminum (2)
- Antimicrobials (2)
- Atomic packing factor (2)
- Atomization (2)
- Austenitic stainless steel (2)
- BAMline (2)
- Bacteria (2)
- Bacterial adhesion (2)
- Barcoding (2)
- Bead (2)
- Bildanalyse (2)
- Bildgebung (2)
- Broadband dielectric spectroscopy (2)
- Building Materials (2)
- Building materials (2)
- CALPHAD (2)
- CCMat (2)
- CCS (2)
- CLP (2)
- Calcium cobaltite (2)
- Carbon capture (2)
- Carbon dioxide (2)
- Catalysts (2)
- Characterization (2)
- Chemical composition (2)
- Chemically Complex Materials (2)
- Composite (2)
- Composites (2)
- Computertomographie (2)
- Confocal (2)
- Core-shell (2)
- Corrosion Testing (2)
- Corrosion inhibition (2)
- Crack (2)
- Crack Propagation (2)
- Crack growth velocity (2)
- Crack healing (2)
- Crack intensity factor (2)
- Creep-resistant steel (2)
- Crystal orientation (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Damage (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Data fusion (2)
- Dental materials (2)
- Deuterium (2)
- Digitalization (2)
- Double cantilever beam (2)
- Durability (2)
- ECHA (2)
- EDX (2)
- ESEM (2)
- Eigenspannungen (2)
- Einstufung (2)
- Electrocatalysis (2)
- Electrochemistry (2)
- Electron beam induced modification (2)
- Elemental composition (2)
- Emission (2)
- Emission test chamber (2)
- Encoding (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Exchange interaction (2)
- Explosionsschutz (2)
- Explosivstoffe (2)
- FEM (2)
- FIB (2)
- Faseroptik (2)
- FeNi-Oxide NPs (2)
- Ferromagnetism (2)
- Finite element method (2)
- Fire (2)
- Friction and wear (2)
- GMR (2)
- GMR-Sensorik (2)
- Gas-Staub-Gemische (2)
- Gel-type electrolytes (2)
- Geothermal (2)
- Glas (2)
- Gold nanocluster (2)
- Gold nanoparticles (2)
- Green chemistry (2)
- Grüneisen parameter (2)
- Hazardous substances (2)
- Henry's constant (2)
- High Pressure (2)
- High temperature corrosion (2)
- High-temperature corrosion (2)
- Hot stamping (2)
- Hybride Gemische (2)
- Hydrogen permeability (2)
- Hydrogen storage (2)
- IUCLID (2)
- Image analysis (2)
- Image processing (2)
- Imaging techniques (2)
- In situ heating (2)
- In-situ (2)
- InP (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- Interatomic potentials (2)
- Ionic Liquid crystals (2)
- Iron (2)
- L-PBF (2)
- LLG (2)
- LMD (2)
- LTCC (2)
- Landau Lifshitz equation (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser metal deposition (2)
- Least-squares adjustment (2)
- Lichtbogensensorik (2)
- Lifetime (2)
- Load transfer (2)
- Low Cycle Fatigue (2)
- MMC (2)
- MOF (2)
- MSG-Engspaltschweißen (2)
- Machine Learning (2)
- Macrophages (2)
- Magnesium alloy (2)
- Magnetic moment (2)
- Magnetic nanoparticles (2)
- Metadata schema (2)
- Metal Matrix Composite (2)
- Metal matrix composite (2)
- Metal organic frameworks (2)
- Metals (2)
- Method (2)
- Micromagnetism (2)
- Microwave synthesis (2)
- Mikrobiell induzierte Korrosion (2)
- Modellierung (2)
- Molecularly imprinted polymers (2)
- Multielectrode array sensors (2)
- Multiplexing (2)
- NFDI (2)
- NIR (2)
- Nanomechanics (2)
- Nanosensor (2)
- Neutron (2)
- Neutron Diffraction (2)
- Non-classical crystallization (2)
- Normung (2)
- Numerical modeling (2)
- OOMMF (2)
- Oberflächenenergie (2)
- Object oriented micromagnetic framework (2)
- Online Process Monitoring (2)
- Ontologie (2)
- Ontology (2)
- Optics (2)
- Oxidglas (2)
- PBF-LB/M (2)
- Particle (2)
- Phonons (2)
- Photocatalysis (2)
- Plastic (2)
- Polycarbonate (2)
- Polymer 3R (2)
- Polymer bilayer coatings (2)
- Polypropylene (2)
- Porosity (2)
- Powder Bed Fusion (2)
- Precipitation (2)
- Process Monitoring (2)
- Protein (2)
- Proteins (2)
- Pyrotechnik (2)
- QHA (2)
- QY (2)
- Quantum yield (2)
- Quecksilberporosimetrie (2)
- REM (2)
- Radiotherapy (2)
- Referenzdaten (2)
- Reflectography (2)
- Reinheitsgradbestimmung (2)
- Resistance (2)
- Resonance frequency (2)
- Robotische Glasschmelzanlage (2)
- Roughness (2)
- SCNC (2)
- SEM/EDS (2)
- SIMS (2)
- SWIR (2)
- Scanning electrochemical microscope (SECM) (2)
- Selected Laser Melting (2)
- Semantic Web Technologies (2)
- Semiconductor (2)
- Sicherheitstechnische Kenngrößen (2)
- Silica (2)
- Single molecule (2)
- Single particle spectroscopy (2)
- Small-angle scattering (2)
- SnO2 (2)
- Stainless steels (2)
- Stickstoff (2)
- Stochastic Landau Lifshitz Gilbert equation (2)
- Structural Health Monitoring (2)
- Surface (2)
- Surface functionalization (2)
- Surface integrity (2)
- Synchrotron X-Ray Refraction (2)
- Synchrotron X-ray computed tomography (2)
- Syngle Crystal alloy (2)
- Temperature (2)
- Thermally induced porosity (2)
- Thermodynamik (2)
- Thermoelectric materials (2)
- Thermogravimetrie (2)
- Thin film metrology (2)
- Titanium (2)
- Tool wear (2)
- Topotactic transformation (2)
- Traceability (2)
- Transition metals (2)
- Tungsten carbide (WC) (2)
- Ultra-Thin films (2)
- Ultraschalltauchtechnik (2)
- Ultrashort laser processing (2)
- Ultrasonic-assisted milling (2)
- Ultrasound (2)
- VOC (2)
- Verbundfestigkeit (2)
- Vessels (2)
- Wasserstoff (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- Wood (2)
- X-ray computed tomography (2)
- XRF (2)
- Zeolitic imidazolate framework (2)
- ZfP (2)
- Zinc coatings (2)
- Zustandsüberwachung (2)
- beta particle (2)
- cylinders (2)
- 18HLT01 MetVes II (1)
- 29Si-27Al TRAPDOR MAS (1)
- 3D High-temperatue shape screening (1)
- 3D analysis (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D imaging (1)
- 3D printing (1)
- 3D tomography (1)
- 3D-Formerkennung (1)
- 5-hydroxynicotinic acid (1)
- 5G (1)
- AFM-IR (1)
- AISI 304L (1)
- ALD (atomic layer deposited) (1)
- ALD-Beschichtung (1)
- ALD-Hybridprozesse (1)
- AM IN718 (1)
- ASAXS (1)
- ASR (1)
- ATH (1)
- ATRP (1)
- Abkühlgeschwindigkeit (1)
- Absolute flourometry (1)
- Absorption edge (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acrylamide based polymers (1)
- Active pharmaceutical ingredient (API) (1)
- Additiv gefertigter Stahl (1)
- Additive Manufacture (1)
- Additive Fertigung (AM) (1)
- Additive surface treatment (1)
- Admixtures (1)
- Adsorbed layer (1)
- Advanced manufacturing (1)
- Advanced nanomaterials (1)
- Aerosole (1)
- Affinity chromatography (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag2S (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging (1)
- Aging mechanisms (1)
- Air Void System (1)
- Air exchange rate (1)
- Al alloy (1)
- Al-Cu-Li alloys (1)
- Al2O3 (1)
- Al2O3 thin films (1)
- Al2O3-Schichten (1)
- AlSi10Mg alloy (1)
- Albumin (1)
- Alcali activated binders (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkalialumosilicatsysteme (1)
- Alkaline earth metal (1)
- Aln (1)
- Altglasfragmente (1)
- Altpapierrecycling (1)
- Alumina (1)
- Aluminium Alloy (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Ammoniumnitrat (1)
- Amorphous silica particles (1)
- Amphiphilicity (1)
- Amplification (1)
- Anaerob (1)
- Analyser-based imaging (1)
- Analytical solution (1)
- Anisotropy (1)
- Annealing study (1)
- Anodic Aluminum Oxide (1)
- Anodization (1)
- Antibiotics (1)
- Antibodies (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Artefact (1)
- Artificial digestion (1)
- Asphaltene content (1)
- Assays (1)
- Atmospheric Corrosion (1)
- Atmospheric Plasma Spraying (1)
- Atomic Force Microscopy (1)
- Atomic Layer Deposition (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Ausbildung (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Automatisation (1)
- Automatisierung (1)
- BADGER film (1)
- BBR (1)
- BCS (1)
- BLE (1)
- BSA (1)
- BTS (1)
- Bacterial growth (1)
- BadgerFilm (1)
- Baudenkmal (1)
- Baustahl (1)
- Baustoffe (1)
- Bauzustandsanalyse (1)
- Benannte Stelle (1)
- Bench braking sequence (1)
- Beratung Behörden/Ministerien (1)
- Beschichtung (1)
- Beta particle (1)
- Beton (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Betonschallplatte (1)
- Betonschäden (1)
- Bewitterung (1)
- Bexarotene (1)
- Bildverarbeitung (1)
- Bio Ceramics (1)
- Bio-SAXS (1)
- Bio-receptive (1)
- BioSAXS (1)
- Bioactive glass (1)
- Biocide (1)
- Biocides (1)
- Biocomposite (1)
- Biocorrosion (1)
- Biofilm cultivation (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilms (1)
- Bioimaging (1)
- Biomasseverbrennung (1)
- Biomimetics (1)
- Bioreceptivity (1)
- Bioresorbable (1)
- Blast injury (1)
- Bluetooth Low Energy (1)
- Boehmite alumina (1)
- Bonding Analysis (1)
- Bovine serum albumin (1)
- Bragg-edge (1)
- Brazing (1)
- Bremsbeläge (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Bronze (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Build Angle (1)
- Building products (1)
- Bulk diffusion (1)
- Bulk material (1)
- Bulk properties ageing (1)
- Burst pressure (1)
- Burst test (1)
- C-C coupling (1)
- CALPHAD databases analysis (1)
- CCUS (1)
- CEO (1)
- CERN (1)
- CFD (1)
- CMAS (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CMSX4 (1)
- CO2-Korrosion (1)
- CONSENS (1)
- CUSP (1)
- Calcium sulfoaluminate cement (1)
- Calculation (1)
- Camera (1)
- Capsules (1)
- Carbide (1)
- Carbon (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon nanomembranes (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (1)
- CdSe (1)
- Cearmics (1)
- Cell imaging (1)
- Cement (1)
- Cement hydration (1)
- Ceramic (1)
- Ceramic spring (1)
- Ceramic-ceramc joints (1)
- Ceramics (1)
- Cermet (1)
- Certification (1)
- Certified reference material (1)
- Certified standards (1)
- Charakterisierung (1)
- Chemical Bonds (1)
- Chemical analyses (1)
- Chemical compositions (1)
- Chemically Complex Alloy (1)
- Cheminformatics (1)
- Chloride (1)
- Chromatography (HIC) (1)
- Chromium (1)
- Chromium (III) complexes (1)
- Chromium oxide (1)
- Chromstahl (1)
- Climate chamber simulation (1)
- Co-axial monitoring (1)
- CoCrMo (1)
- Coatings (1)
- Coda Wave Interferometry (1)
- Coherent Rayleigh OTDR (1)
- Cold Spray (1)
- Column chromatography (1)
- Columnar crystal growth (1)
- Columnar liquid crystals (1)
- Compatible solute (1)
- Complex concentrated alloy (CCA) (1)
- Component test (1)
- Composite cylinder (1)
- Composition (1)
- Compound (1)
- Compression (1)
- Compsite tapes (1)
- Configurational entropy (1)
- Confined Columnar Liquid Crystals (1)
- Confocal fluorescence microscopy (1)
- Conservation (1)
- Construction products (1)
- Consumer articles (1)
- Contact resonance (1)
- Conventional testing (1)
- Convolutional neural networks (1)
- Coordination polymer (1)
- Core-shell architecture (1)
- Core/shell materials (1)
- Corosion (1)
- Corrosion behaviour (1)
- Corrosion investigations (1)
- Corrosion loss (1)
- Corrosion product layer (1)
- Corrosion products (1)
- Corrosion protecting system (1)
- Cosolute (1)
- Crack evolution (1)
- Crack propagation (1)
- Crack propagation analysis (1)
- Cracks (1)
- Creep-resistant Steel (1)
- Crush (1)
- Cryo-TEM (1)
- Crystal Engineering (1)
- Crystal plasticity (1)
- Crystal structure (1)
- Crystalline structure (1)
- Curing Monitoring (1)
- Curvelet Transform (1)
- Cutting material (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-L (1)
- DIC assisted compression (1)
- DIN 52186 (1)
- DIN EN 252 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DRIFTS (1)
- DSR (1)
- Damage Analysis (1)
- Damage mechanism (1)
- Damage repair (1)
- Dangerous goods packaging (1)
- Dangerous goods packagings (1)
- Dark-field transmission electron microscopy (1)
- Data (1)
- Data Fusion (1)
- Data Interoperability (1)
- Data Science (1)
- Data analysis (1)
- Databases (1)
- Datenanalyse (1)
- Datenträger (1)
- Deep Learning (1)
- Defect detection (1)
- Defects (1)
- Deformation (1)
- Deformationen (1)
- Degradation of Mechanical Properties (1)
- Degree of damage (1)
- Degree of purity (1)
- Delamination (1)
- Dendrimersomes (1)
- Dendritic amphiphiles (1)
- Density (1)
- Density Functional Theory (1)
- Dental material (1)
- Depth-profiling (1)
- Design Fire (1)
- Destabilization (1)
- Detection (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusion (1)
- Diffusion Coefficient (1)
- Diffusion barrier (1)
- Digital material representation (1)
- Digital twin (1)
- Digitaler Zwilling (1)
- Diopside (1)
- Direct fluorine-metal bond (1)
- Direct laser writing (1)
- Discotic Liquid Crystal (1)
- Discotic liquid crystals (1)
- Dislocations (1)
- Distortion (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed vibration sensing (1)
- Distribution during filling (1)
- Disäuren (1)
- Doping study (1)
- Downstream processing (1)
- Dredging mud (1)
- Drop test (1)
- Druckwelle (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dust analysis (1)
- Dynamic light scattering (1)
- Dynamics (1)
- EBSD analysis (1)
- EC4SafeNano (1)
- EDS (1)
- EDX Analysis (1)
- EDXRD (1)
- EMN (1)
- EMPIR project (1)
- EPMA (1)
- ESI-TOF-MS (1)
- EU H2020 project (1)
- Ectoin (1)
- Ectoine (1)
- Eddy Current (1)
- Edelstahl (1)
- Eigenspannung (1)
- Eindringmodul (1)
- Einkristalllegierung (1)
- Einzelfaserdurchzugsversuch (1)
- Eisen (1)
- Elastomer (1)
- Elastomers (1)
- Electro catalyst (1)
- Electrochemical noise (1)
- Electrodeposited Ni - coatings (1)
- Electrolysis (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron beam (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (EPMA) (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Ellipsometric metrology (1)
- Emission chamber testing (1)
- Energetic materials (1)
- Energietechnik (1)
- Energy (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Engineered Nanomaterials (1)
- Environment (1)
- Epox (1)
- Epoxy nanocomposite (1)
- Er(III) (1)
- Erneuerbare Energien (1)
- Erosion (1)
- European Metrology Network (1)
- European standard (1)
- Exciton diffusion (1)
- Experimental study (1)
- Extracellular polymeric substances (1)
- Extracellular vesicles (EV) (1)
- Extrusion (1)
- FE (1)
- FIB/SEM (1)
- FNCT (1)
- FTIR spectroscopy (1)
- Fachwerkträger (1)
- Fallhammer (1)
- Far-infrared spectroscopy (1)
- Farbätzen (1)
- Fasermodifikation (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Façade (1)
- Fe-Cr alloys (1)
- Fe-Ni (1)
- Fe2TiO5 (1)
- FeCr- alloys (1)
- FeNi (1)
- FeNi thin film (1)
- FeSnOx (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferroelektret (1)
- Fiber (1)
- Fiber reinforced dental post (1)
- Fiber sensors (1)
- Fiber-optic microarray (1)
- Fiberglass composite (1)
- Film depositition (1)
- Film thickness determination (1)
- Finite Element Method (1)
- Finite Element Modelling (1)
- Fire Retardant (1)
- Flow Cell (1)
- Flow-System (1)
- Fluorescence quenching (1)
- Fluorescence spectroscopy (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Fluoride (1)
- Fluorides (1)
- Fluorine Interaction (1)
- Flüssigmetallversprödung (1)
- Foam tiles (1)
- Focussed ion beam growth (1)
- Force distance curves (1)
- Formaldehyde (1)
- Foundation (1)
- Fractional factorial (1)
- Fractography (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Fraktografie (1)
- Fraktographie (1)
- Fre (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fullerene (1)
- Functional group detection (1)
- Functionality type distribution (1)
- Funktionelle Beschichtungen (1)
- Funtional Groups (1)
- Füllgradregelung (1)
- G5P (1)
- GD-OES (1)
- GEXRF (1)
- GUM-compliance (1)
- GVP (1)
- Gamma-Co60 radiation (1)
- Gamma-irradiation (1)
- Gas Sorption (1)
- Gas solubility (1)
- Gas turbine (1)
- Gefüge (1)
- Gel electrolytes (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Generator (1)
- Geopolymer (1)
- Geopolymers (1)
- Geothermal energy (1)
- Geothermie (1)
- Ggraphene polymer nanocomposite (1)
- GlasDigital (1)
- Glasanalyse (1)
- Glasig-kristalline Sinterwerkstoffe (1)
- Glaskeramik (1)
- Glass paints (1)
- Glass transformation temperature (1)
- Glass transition (1)
- Glass-ceramic (1)
- Glasstruktur (1)
- Gleeble (1)
- Gleitlinien (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycerin (1)
- Gold (1)
- Gold Nanoparticle (1)
- Gold mosaics (1)
- Grain boundary corrosion (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Grazing exit (1)
- Grenzflächenaktive Verbindung (1)
- Grey cast iron machining (1)
- Growth Kinetics (1)
- Guideline (1)
- HDPE Sorption (1)
- HF (1)
- HR-CS-AAS (1)
- HV cable accessories (1)
- HV-Insulation (1)
- Haftfestigkeit (1)
- Haftvermittler (1)
- Halbleiterphysik (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Harsh environments (1)
- Hatch length (1)
- Hauptkomponentenanalyse (1)
- Hazmat (1)
- Heat Treatment (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heißzug (1)
- Helium- und Wasserstoffpermeation (1)
- Heterogene plastische Deformation (1)
- Hexafluorobenzen (1)
- HfO2 (1)
- High Cycle Fatigue (1)
- High Molecular Polyethylene (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High resolution ultrasonic testing (1)
- High temperature (1)
- High temperature corrosion resistance (1)
- High voltage cable accessories (1)
- High-Performance Concrete (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-strength steels (1)
- High-temperature stability (1)
- Historic buildings (1)
- Hochfester Feinkornbaustahl (1)
- Hochtemperaturanwendungen (1)
- Hollow specimen (1)
- Holz (1)
- Holzbaustoff (1)
- Holzprüfung (1)
- Homemade explosives (1)
- Honeycomb structure (1)
- Horizontaldilatometer (1)
- Human plasma (1)
- Humidity (1)
- Hybrid inorganic/organic copolymers (1)
- Hydration (1)
- Hydrogen diffusion (1)
- Hydrogen permeation (1)
- Hydrophobic interaction (1)
- Hydrothermal treatment (1)
- Hydroxyectoine (1)
- Härtevergleichsplatten (1)
- Härteverlauf Schweißnaht (1)
- IN 625 (1)
- IN 718 (1)
- IN718 (1)
- IR (1)
- IR spectroscopy (1)
- ISO 5725 (1)
- Illumina (1)
- ImAFM (1)
- Image Denoising (1)
- Image segmentation (1)
- Immersion tank testing (1)
- Impact excitation (1)
- Impact strength (1)
- Implant-Test (1)
- In situ Raman (1)
- In situ XRD (1)
- In situ analysis (1)
- In situ diffraction (1)
- In situ measurement (1)
- In situ measurement, (1)
- In situ tensile test (1)
- In situ testing (1)
- In-Situ (1)
- In-Situ Characterization (1)
- In-situ Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ loading (1)
- In-situ monitoring (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 718 (1)
- Indoor air (1)
- Industrieabwasseraufbereitung (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Initial hydration (1)
- Innovative Messtechnik (1)
- Inorganic polymers (1)
- Instrumented indentation testing (1)
- Instrumentierte Eindringprüfung (1)
- Integrated analysis (1)
- Interface (1)
- Interim storage (1)
- Interlaboratory comparison (1)
- Intermediate (1)
- Internal friction (1)
- Internal oxidation (1)
- Interpenetrating polymer network (1)
- Interphase (1)
- Invasive Arten (1)
- Inverse Analysis (1)
- Inverse analysis (1)
- Inverse problem (1)
- Ionic liquids (1)
- Ionizing radiation damage (1)
- Iridium oxide films (1)
- Iridium-titanium mixed oxides (1)
- Iron aluminides (1)
- Iron oxide (1)
- Isotope analysis (1)
- JNP AdvManuNet (1)
- Kalottenverfahren (1)
- Kaltrissprüfung (1)
- Kavitation (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Keramik (1)
- Kiefernholz (1)
- Kieselsäure (1)
- Klebfestigkeit (1)
- Kleidermotte (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Knowledge Readiness Level (1)
- Knowledge Representation (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konformitötsbewertung (1)
- Kontrastierung (1)
- Korrosionsabtrag (1)
- Kraftabhängige Funktion (1)
- Kristallplastizität (1)
- Künstliche neuronale Netze (1)
- L-PBF 316L (1)
- LBM (1)
- LIBS TIG welding (1)
- LIPSS (1)
- LPBF (1)
- LPSO (1)
- LTCC multilayer (1)
- Laboratory Container (1)
- Laboratory method (1)
- Laborvergleich Härte (1)
- Lanthanide(III) (1)
- Large scale test (1)
- Large-scale production (1)
- Large-scale synthesis (1)
- Large-scale test (1)
- Laser Cladding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser cludding (1)
- Laser dispersing (1)
- Laser structuring (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strcutures, LIPSS (1)
- Laserthermografie (1)
- Lasertriangulationssensor (1)
- Latex (1)
- Lattice structure (1)
- Layer-by-layer deposition (1)
- Leaching process (1)
- Least-Squares Adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lichtmikroskopie (1)
- Ligand (1)
- Ligands (1)
- Lightweight structures (1)
- Lignin (1)
- Lignosulfonate (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Lithium Ion Batteries (1)
- Lithium batteries (1)
- Lithium-ion batteries (1)
- Lizard (1)
- Load Partition (1)
- Load history (1)
- Loading factor (1)
- Localized corrosion (1)
- Lokale Korrosion (1)
- Long-term monitoring (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- Luftultraschall (1)
- Luminescence lifetime measurments (1)
- Luminescent materials (1)
- MIC projekt (1)
- MID IR Spectroscopy (1)
- ML (1)
- Machine-Learning Segmentation (1)
- Magic-sized cluster (1)
- Magnesium (1)
- Magnetic nano-particles (1)
- Magnetic stray fields (1)
- Magnetostrictive actuator layer (1)
- Magnetostrictive layer (1)
- Magnetron sputtering (1)
- Manganese oxide (1)
- Maritime atmosphere (1)
- Martensitische nichtrostende Stähle (1)
- Maschinennachgiebigkeit (1)
- Material characterization (1)
- Material degradation (1)
- Material design (1)
- Material model (1)
- Material oxidation (1)
- Material selection (1)
- McSAS3 (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical Behavior (1)
- Mechanical strength (1)
- Mechanichal behaviour (1)
- Mechanische Kennwertermittlung (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemie (1)
- Median lethal energy deposit (1)
- Medieval glasses (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Melt Flow Rate (MFR) (1)
- Melt pool behaviour (1)
- Melting (1)
- Mesoporous (1)
- Mesoporous materials (1)
- Mesoporous thin films (1)
- Messunsicherheit (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metal reducing bacteria (1)
- Metal seal (1)
- Metallsulfide (1)
- Metallurgie (1)
- Methodenvalidierung (1)
- Micro computed tomography (1)
- Micro-XRF (1)
- Micro-heterogeneity (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological investigation (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microfluidic (1)
- Micromanipulation (1)
- Micromixer (1)
- Microparticles (1)
- Micropatterned dry adhesive (1)
- Microplastics sampling (1)
- Microprinting (1)
- Microstructure Analysis (1)
- Microstructure analysis (1)
- Microstructure-property relations (1)
- Mikro-CT (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mikrostruktur (1)
- Mineralogie (1)
- Missbräuchliche Verwendung in Stadien (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model alloy (1)
- Model and measurement based analysis (1)
- Modeling (1)
- Moisture (1)
- Moisture drying (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular dynamic simulation (1)
- Monte-Carlo simulations (1)
- Morpho-chemical characterization (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multielectrode (1)
- Multiphoton Lithography (1)
- Multiple ageing and rejuvenation (1)
- Multiplexing sensory fiber-optic microarrays (1)
- NDT Monitoring (1)
- NFDI-MatWerk (1)
- Nano-landscape (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nanofiller (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticel based pH-probes (1)
- Nanophysik (1)
- Nanoporous media (1)
- Nanorisk (1)
- Nanosafety (1)
- Nanosensors (1)
- Nanostructures (1)
- Natural rubber (1)
- Nd-sensitizer (1)
- Nd3+ (1)
- Neintron diffraction (1)
- Neozoon (1)
- Netron diffraction (1)
- Network Communication (1)
- Neutronbeugungsverfahren (1)
- Neutronen (1)
- Neutronendiffraktion (1)
- Neutronenradiographie (1)
- Ni-base superalloy (1)
- Ni-based alloy (1)
- Nickel based alloy (1)
- Nickelbasislegierungen (1)
- Niobium carbide (1)
- Niobium carbide powder (1)
- Nitrogen (1)
- Non destructive testing (1)
- Non-Destructive Testing (1)
- Non-classical crystallization theory (1)
- Non-destructive testing (1)
- Normalbeton (1)
- Novel equipment (1)
- Nuclear Magnetic Resonance (1)
- Numerical Modeling (1)
- Numerical modelling (1)
- Numerische Simulation (1)
- OH Radical (1)
- OH radical scavenger (1)
- OH radicals (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenkeimbildung (1)
- Offshore (1)
- One-part formulation (1)
- Online NMR Spectroscopy (1)
- Open data (1)
- Open science (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Optical connector (1)
- Optical criterion (1)
- Optical layer model (1)
- Optical properties (1)
- Optoelektronik (1)
- Orientation-dependent microstructure (1)
- Orientierung (1)
- Osmolyte (1)
- Overlay (1)
- Oxide Glasses (1)
- Oxygen reduction reaction (1)
- P25 (1)
- P92 (1)
- PAEK (1)
- PDMS (1)
- PEG (1)
- PH (1)
- PIM-1 (1)
- PMD Core Ontology (1)
- PMDco (1)
- POD (1)
- POSS (1)
- PU Learning (1)
- PVD /ECD process (1)
- Pair Distribution Functions (1)
- Pair distribution function analysis (1)
- Paracetamol (1)
- Partial discharge detection (1)
- Partial penetration (1)
- Particle Synthesis (1)
- Particle measurement (1)
- Particle scattering (1)
- Particle scattering simulations (1)
- Particle size (1)
- Particle size distribution (1)
- Particle size distributuion (1)
- Particle synthesis (1)
- Paste (1)
- Peem (1)
- Permeability (1)
- Permeation (1)
- Perovskite (1)
- Pharmaceuticals (1)
- Phase composition (1)
- Phasenzusammensetzung (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorus (1)
- Photocuring (1)
- Photoluminescence (1)
- Photoresist (1)
- Photovoltaic (1)
- Phthalocyanine (1)
- Piezopolarisation (1)
- Pipeline (1)
- Plattform MaterialDigital (1)
- Politikberatung (1)
- Pollen (1)
- Polyacrylamide (1)
- Polyamid 12 (1)
- Polyaniline (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polyethylene, PE-HD (1)
- Polyglycerol (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer coating (1)
- Polymer nanocomposites (1)
- Polymer optical fibers (1)
- Polymer optical fibre (1)
- Polymer-Ceramic-Composite (1)
- Polymeric membrane (1)
- Polymers of intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pores (1)
- Porosity growth (1)
- Porosität (1)
- Porous Materials (1)
- Porous materials (1)
- Portland cement (1)
- Position detection (1)
- Poster presentation (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Powder method (1)
- Preferred orientation (1)
- Pressure loading (1)
- Pressure tanks (1)
- Pressure wave (1)
- Primäre Explosionswirkug (1)
- Probenpräparation (1)
- Process Control (1)
- Processing (1)
- Propagation modes (1)
- Property simulation (1)
- Protective glazing (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein unfolding (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Proximatanalyse (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Präparation (1)
- Prüfmethoden (1)
- Prüfrichtlinie (1)
- Pulse reflection (1)
- Pulse shape analysis (1)
- Pulvermethode (1)
- QD (1)
- QSPR (1)
- Quality control (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantum Chemistry (1)
- Quantum Dot-Rod (1)
- Quantum Yield (1)
- Quartz Crystal Microbalance QCM (1)
- Quasi-distributed sensing (1)
- Quenching and partitioning (1)
- Qulitätssicherung (1)
- RAFT (1)
- ROS (1)
- Radar (1)
- Radical Scavenger (1)
- Radical scavenger (1)
- Radicals (1)
- Radiografie (1)
- Radiological inspections (1)
- Raman spectroscopy (1)
- Rare earth nanoparticles (1)
- Ratiometric Sensors (1)
- Ratiometric sensors (1)
- Rauheit (1)
- Rayleigh scattering (1)
- Recycling (1)
- Reduction 4-nitrophenol (1)
- Reduction of agglomerates (1)
- Reductive amination (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference materials (1)
- Reference nanomaterials (1)
- Reference particles (1)
- Reference procedures (1)
- Reference product (1)
- Reference samples (1)
- Registrierungsdossiers (1)
- Reinforcing Bar (1)
- Reliable characterization (1)
- Repair (1)
- Reproducibility (1)
- Research Data Management (1)
- Research data management (1)
- Residual stress measurements (1)
- Residual stress state (1)
- Residual stresses (1)
- Resonance (1)
- Resonanz (1)
- Reverse-time migration (1)
- Rice husk ash (1)
- Rigid amorphous fraction (1)
- Ringversuche (1)
- Risse (1)
- Rissprüfung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Round robin (1)
- Round robin test (1)
- Rubber (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- S-phase (1)
- SALSA (1)
- SDS-PAGE (1)
- SEM analysis (1)
- SEP 1927 (1)
- SIEF (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Safe-by-Design (1)
- Safer by design (1)
- Salt melt (1)
- Sandblasting (1)
- Sandsteine (1)
- Sandstone (1)
- Sandstorm (1)
- Sanger sequencing (1)
- Sapphire (1)
- Sc-ICP-ToF-MS (1)
- Scaffold (1)
- Scale-bridging (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Schichtdicken (1)
- Schichtherstellung (1)
- Schichttestung (1)
- Schutzverglasung (1)
- Schwefelgehalt (1)
- Schweißdatenmanagement (1)
- Schweißnähte (1)
- Schwindungsinhomogenitäten (1)
- Schwindungsverhalten (1)
- Scientific software (1)
- Sea Water (1)
- Seenotrettungsmittel (1)
- Selbstreinigung (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser curing (1)
- Self-assembly (1)
- Self-healing silicone rubber (1)
- Self-powdering (1)
- Self-reactive substances (1)
- Semantic Interoperability (1)
- Semi-metallic friction material (1)
- Sende-Empfangs Prüfkopf (1)
- Sequential learning (1)
- Service life (1)
- Service life model (1)
- Shape (1)
- Shell (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si wafer filter (1)
- Si-Ge (1)
- SiGe (1)
- SiO2 (1)
- Silica Nanoparticles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicone rubber (1)
- Silver (1)
- Silver nanoparticle (1)
- Simvastatin (1)
- Single cell analysis (1)
- Single crystal X-ray diffraction (1)
- Single cystal (1)
- Single-stranded DNA-binding proteins (1)
- Size and size distribution (1)
- Size effect (1)
- Size-exclusion chromatography (SEC) (1)
- Sliding performances (1)
- Slow Strain Rate Testing (1)
- Slow crack growth (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle x-ray scattering (1)
- Small-angle xray scattering (1)
- Smart materials (1)
- Smouldering (1)
- Sodiumborosilicate glasses (1)
- Software (1)
- Soil (1)
- Soil-structure interaction (1)
- Solar Cell (1)
- Solarenergie (1)
- Solid-State-Reaction (1)
- Solution doping (1)
- Sorption (1)
- Spectral multiplexing (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopy (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Spinel (1)
- Spontane Polarisation (1)
- Spray drying (1)
- Sprengplattieren (1)
- Spring constant (1)
- Spruce (1)
- Stabilization of HT-structures at room temperature (1)
- Stabilizer (1)
- Stable suspensions (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless Steel (1)
- Stainless Steels (1)
- Standard (1)
- Standardisation (1)
- Standardization (1)
- Standardization of Ellipsometry (1)
- Starch (1)
- Starch nanoparticle (1)
- Strain sensors (1)
- Stress cracking resistance (1)
- Strontiumfluoride (1)
- Structural color (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Subgrain structure (1)
- Submerged arc welding (1)
- Substrate effect (1)
- Sulfiding (1)
- Sulfur (1)
- Superalloy (1)
- Superconducting (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Superplasticizer (1)
- Superplasticizers (1)
- Surface Chemical Transformation (1)
- Surface Energy (1)
- Surface Plasmon Resonance (1)
- Surface analysis (1)
- Surface characterization (1)
- Surface crystallization (1)
- Surface energy (1)
- Surface functionalities (1)
- Surface group analysis (1)
- Surface modification (1)
- Surface morphology (1)
- Surface structuring (1)
- Surface texturing (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron XRD (1)
- Synchrotron radiation (1)
- Synchrotron refraction radiography (1)
- Synthesizability (1)
- Synthetic air (1)
- TATP (1)
- TBC (1)
- TED-GC-MS (1)
- TED-GC/MS (1)
- TEKKEN-Test (1)
- TEM Image (1)
- TGA-FTIR (1)
- THz and mid IR spectroscopy (1)
- THz spectroscopy (1)
- TIG-welding (1)
- TKD (1)
- TMDSC (1)
- TMF (1)
- TRIP (1)
- TRIS (1)
- Talbot-Lau interferomerty (1)
- Talbot-Lau interferometry (1)
- Tankdesign (1)
- Tauchwägung (1)
- Technical Lignin (1)
- Temeprature scaling (1)
- Temperature dependence (1)
- Temperature scaling (1)
- Tensile (1)
- Tensile Properties (1)
- Tensile test (1)
- Terahertz Tomography synthetic aperture (1)
- Terahertz synthetic aperture dielectric materials (1)
- Termites (1)
- Ternary quantum dot (1)
- Test method (1)
- Test methods validation (1)
- Test procedure (1)
- Testing (1)
- Textile fibres (1)
- Texture (1)
- Themal Transitions (1)
- Thermal Spray (1)
- Thermal arrier coatings (1)
- Thermal barrier coatings (1)
- Thermal cycling (1)
- Thermal decomposition (1)
- Thermal treatment (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermografie (1)
- Thermomagnetic material (1)
- Thermomechanics (1)
- Thermoplastic Polyurethane (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thickness (1)
- Thin Films; (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiO2 nanoparticle (1)
- Time-offlight Diffraction (TOFD) (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium nitride (1)
- Titanium-di-boride (1)
- Titration (1)
- Tomographie (1)
- Tomography (1)
- Tool steel (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topografie (1)
- Topography (1)
- Topometry (1)
- Torsional fatigue (1)
- Total scattering analysis (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transport mechanism (1)
- Tribological behavior (1)
- Tribologie (1)
- Trinkwasser (1)
- Tunnel (1)
- Two photon polymerisation (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Type III composite pressure receptacles (1)
- Tyrosine (1)
- UCNP (1)
- UCST polymers (1)
- UCST-type polymer (1)
- UPLC (1)
- UV Weathering (1)
- UV-irradiation (1)
- Ultra sound (1)
- Ultrafast laser processing (1)
- Ultraschall (1)
- Ultrasonic (1)
- Ultrasonic Testing (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Ultrasonic echo technique (1)
- Uncertainty (1)
- Uncertainty budgets (1)
- UpConversion (1)
- Upconversion nanoparticles (1)
- Upconverting nanoparticles (1)
- VM12 SHC (1)
- Vacuum (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validation (1)
- Verbundwerkstoffe (1)
- Vereinfachtes Verfahren (1)
- Vergleichsstahlproben (1)
- Vernetzte Produktion (1)
- Verzinkungen (1)
- Videoskopie (1)
- Virtual experiments (1)
- Vitual computer tomography simulation (1)
- Volatile organic compounds (1)
- WIG-Blindschweißnaht (1)
- Waiting time (1)
- Wasseraufbereitung (1)
- Wasserstoffpermeation (1)
- Waste heat recovery (1)
- Water/alcohol mixtures (1)
- Wave propagation (1)
- Weld Joint (1)
- Wellenprüfung (1)
- White light interference microscopy(WLIM) (1)
- Widerstandpunktschweißen (1)
- Windkanal (1)
- Wood preservation (1)
- Workflow (1)
- X-Ray Diffraction (1)
- X-ray Computed Tomography (1)
- X-ray Diffraction (1)
- X-ray computer tomography (1)
- X-ray diffractometry (1)
- X-ray imaging (1)
- X-ray interferometry (1)
- X-ray scattering (1)
- X-ry Diffraction (1)
- XAS (1)
- Yb(III) (1)
- Yellowing (1)
- Young's modulus (1)
- Young´s modulus (1)
- Zahnmedizin (1)
- Zelluläres Polypropylen (1)
- Zement (1)
- Zementgebundene Baustoffe (1)
- Zentrifugentechnologie (1)
- Zeolite (1)
- Zersetzungsgasanalyse (1)
- Zerstörungsfreie Prüfung (1)
- Zinc and galvanized samples (1)
- Zirconium (1)
- ZnSe (1)
- Zonation (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zünder (1)
- additive manufacturing (1)
- aggregation-induced dual emission (AIDE) (1)
- bioimaging (1)
- burst test (1)
- cocrystal (1)
- creep behaviour (1)
- dangerous goods packagings (1)
- excess isotherms (1)
- excitation power density (1)
- extreme temperature (1)
- gas adsorption (1)
- gas solubility (1)
- high-resolution camera (1)
- hybrid repair (1)
- ionic liquids (1)
- life cycle test (1)
- low energy electrons (1)
- mechanochemistry (1)
- milling (1)
- pH probe (1)
- pH sensing (1)
- polyethylene terephthalate (1)
- porous solids (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- ssDNA (1)
- stress cracking resistance (1)
- test methods (1)
- µ-XRF (1)
- µCT (1)
- Örtliche Korrosion (1)
- β-cristobalite structure type (1)
Organisationseinheit der BAM
- 6 Materialchemie (196)
- 5 Werkstofftechnik (94)
- 8 Zerstörungsfreie Prüfung (90)
- 6.3 Strukturanalytik (65)
- 8.5 Röntgenbildgebung (60)
- 9 Komponentensicherheit (52)
- 6.6 Physik und chemische Analytik der Polymere (51)
- 1 Analytische Chemie; Referenzmaterialien (43)
- 6.1 Oberflächen- und Dünnschichtanalyse (39)
- 4 Material und Umwelt (36)
Laser-induced periodic surface structures (LIPSS, ripples) were generated on steel and titanium surfaces upon irradiation with multiple linear polarized femtosecond laser pulses (pulse duration 30 fs, central wavelength 790 nm). The experimental conditions (laser fluence, spatial spot overlap) were optimized in a sample-scanning geometry for the processing of large surface areas covered homogeneously by the nanostructures. The irradiated surface regions were subjected to optical microscopy (OM), white light interference microscopy (WLIM) and scanning electron microscopy (SEM) revealing sub-wavelength spatial periods. The nanostructured surfaces were tribologically tested under reciprocal sliding conditions against a sphere of hardened 100Cr6 steel at 1 Hz using paraffin oil and engine oil as lubricants. After 1000 sliding cycles at a load of 1.0 N, the corresponding wear tracks were characterized by OM and SEM. For specific conditions the laser-generated nanostructures endured the tribological treatment. Simultaneously, a significant reduction of the friction coefficient was observed in the laser-irradiated (LIPSS-covered) areas when compared to the non-irradiated surface, indicating the potential benefit of laser surface structuring for tribological applications.
Commercial grade-1 titanium samples (Ti, 99.5% purity) were treated using three alternative methods, i.e., fs-laser processing in air, thermal heat treatment in an oven, or anodization in an electrochemical bath, all resulting in the formation of differently conditioned superficial oxide layers. The laser processing was carried out by a Ti:sapphire laser (pulse duration 30 fs, central wavelength 790 nm, pulse repetition rate 1 kHz) in a regime of generating laser-induced periodic surface structures (LIPSS). The experimental conditions (laser fluence, spatial spot overlap) were optimized in a sample-scanning geometry for the processing of several square-millimetres large surface areas covered homogeneously by these nanostructures. The thermal processing in the oven was done at two different temperatures, while the electrochemical anodization was performed at room temperature, aiming to generate different polymorphs of titanium oxide at similar oxide layer thickness. The irradiated surface regions were characterized by optical and scanning electron microscopy, and micro Raman spectroscopy. The tribological performance of the differently treated titanium surfaces was characterized in the regime of mixed friction by reciprocating sliding tests against a sphere of hardened steel in un-additivated paraffin oil and fully formulated engine oil as lubricants. The specific tribological performance of the differently treated surfaces is discussed on the basis of possible physical and chemical mechanisms.
Over the last years, the weight of modern car bodies has risen significantly due to the increasing customers’ demand for comfort and safety equipment. However, this ongoing trend leads to an increasing fuel consumption and thus to higher carbon dioxide emissions. In order to counteract these problems, hot stamping has been established in the automotive industry as a key technology for lightweight construction, regarding the manufacturing of safety-relevant car body components. Hot stamped parts are commonly made out of boron-manganese steel 22MnB5, which is initially austenized and subsequently formed and quenched in one process step. As a result, geometrical complex structures with an ultimate tensile strength of 1500 MPa are generated. The surfaces of the workpieces are coated with an Al-Si layer to avoid oxide scale formation and to ensure corro-sion protection. However, the coating system leads to an increased adhesive wear on the tool sur-face due to the high thermo-mechanical tool stresses. Therefore, a time and cost consuming rework of the hot stamping tools is required. The aim of this study is to increase the tribological perfor-mance of hot stamping tools by using a laser implantation process. This technique allows the ma-nufacturing of separated, elevated and dome-shaped microstructures on the tool surface in conse-quence of a localized dispersing of hard ceramic particles by pulsed laser radiation. The generated surface features offer great potential for reducing the tribological load, due to their high hardness and wear resistance. For this purpose, the friction coefficient of unmodified and laser implanted tool surfaces were examined and compared by using a modified pin-on-disk test. In addition, the surfaces were analyzed by optical measurements in order to quantify the amount of wear.
Trash to treasure: recovery of transition metal phosphates for (electro-)catalytical applications
(2022)
Wastewaters containing high concentrations of NH4+, PO43- and transition metals are environmentally harmful and toxic pollutants. At the same time phosphorous and transition metals constitute valuable resources. Here, we report the synthesis routes for Co- and Ni-struvites (NH4MPO4∙6H2O, M = Ni2+, Co2+) out of aqueous solutions resembling synthetic/industrial waste water compositions, and allowing for P, ammonia and metal co-precipitation. Furthermore, the as-obtained struvites were further up-cycled. When heated, these transition metal phosphates (TMPs) demonstrate significant changes in the degree of crystallinity/coordination environment involving a high amount of amorphous phases and importantly develop mesoporosity (Figure 1). In this regard, amorphous and mesoporous TMPs are known to be highly promising (electro-)catalysts.
Amorphous phases do not represent a simple “disordered” crystal but more a complex system with a broad range of compositions and physicochemical properties, which remain mostly unknown. Consequently, we investigated the recrystallization and amorphization process during thermal treatment and a resolved the complex amorphous/crystalline structures (Figure 2). As a proof-of-principle for their applicational use, the as-obtained TMPs demonstrate significant proton conductivity properties similar to apatite-like structures from room to high temperatures (>800°C).
Hence, we have developed a promising recycling route in which environmental harmful contaminants like PO43-, NH4+ and 3d metals would be extracted out of waste waters in the form of precursor raw materials. These raw materials can be then further up-cycled through a simple thermal treatment for their specific application in electrocatalysis.
The scientific and technological interest in graphene has been growing more and more in the late years due to its outstanding properties and diverse promising applications. However, graphene implementation into the industrial market is still limited and many challenges are yet to be addressed before this material can become suitable for the large-scale production. One of the most crucial challenge to overcome is to develop reliable and reproducible ways to characterize the material properties which can heavily affect the product performance. In our study the chemical composition of nine different samples of industrial graphene, graphene oxide and functionalized graphene were investigated. The samples were analysed both in form of powder and pellets. A comparative characterisation of the chemical composition was performed through X-ray Photoelectron Spectroscopy (XPS) and Energy Dispersive X-ray Spectroscopy (EDX). XPS depth resolution is in the order of 10 nm, while for EDX the analysis was performed at two different energy levels, i.e. 5 keV and 15 keV, and thus varying the analysis depth from 200 nm to 2000 nm. The XPS measurement area is 300x700 µm² while the EDX measurement was performed by analysing a grid of 25 locations (5x5) of 150 x 150 ?m2 area, covering the whole pellet surface of 5 mm diameter and then calculating the mean of the elemental concentration. The results of the elemental concentration values from XPS and EDX analyses show a good agreement for all the elements presents in the samples, despite the different spatial resolutions of the two techniques. Therefore, the samples appear homogeneous both in the lateral and vertical directions. The results relative to powder and pellets samples do not differ in a significant way except for a slight increase in the carbon content regarding the pellet samples, probably due to a minor contamination effect introduced through pressing. Nevertheless, pellets samples appear to be quite representative for the material while being much more convenient in terms of handling and safety compared to nano-powders and providing a regular flat surface for EDX analysis. Finally, this approach correlating XPS and EDS represents a simple, fast and reliable way for characterizing the chemical composition and the homogeneity of industrial graphene. This study is part of the project Standardisation of structural and chemical properties of graphene (ISO-G-SCoPe) which has received funding from the EMPIR programme co-financed by the Participating States and from the European Union?s Horizon 2020 research and innovation programme under Grant agreement No. 19NRM04.
In this contribution different ways are explored with the aim to generate suitable training data for ‘non-ideal’ samples using various approaches, e.g., computer-generated images or unsupervised learning algorithms such as generative adversarial networks (GANs). We used these data to train simple CNNs to produce segmentation masks of SEM images and tested the trained networks on real SEM images of complex nanoparticle samples. The novel use of CNN for the automated analysis of the size of nanoparticles of complex shape and with a high degree of agglomeration has proved to be a promising tool for the evaluation of particle size distribution on a large number of constituent particles. Further development and validation of the preliminary model, respectively larger training and validation data sets are necessary.
A series of different nanoparticle suspensions (Gold, Latex, and SiO2 in varying concentrations) were microprinted onto TEM grids in a 4 x 4 array in the concentration range 7x10^8 to 1x10^11 NP/mL and imaged with SEM and TSEM. Concentrations and printing conditions (temperature, relative humidity) were varied in order to minimize the coffee ring effect.
In this paper one refined approach is applied to determine the exact orientation of bipyramidal TiO2 nanoparticles prepared with good dispersion as almost isolated particles on a carbon TEM grid. The advantages of the recently developed high-throughput Transmission Kikuchi Diffraction (TKD) are used to identify quickly and reliably the geometrical orientation of the crystalline TiO2 nanoparticle bipyramids (anatase) on a statistically relevant number of particles.
Control of ball milling conversions is required before the full potential of mechanochemical processing can be realized. It is well known that many parameters affect the outcome of mechanochemical polymorphism, but the energy of ball milling itself is often overlooked. We show here how this parameter alone can exert a significant influence on the polymorphic outcome of ball mill grinding by allowing the selective isolation of two polymorphic forms in their pure form under the same grinding conditions. Furthermore, we show how apparent mechanochemical equilibria can be deceptive. Our results clearly demonstrate the need for careful design and interpretation of ball milling experiments beyond current thinking.
Time-resolved studies on the formation of maghemite nanoparticles combining fast-XANES and SAXS
(2016)
Iron oxide nanoparticles find application in different areas like sensing, magnetic storage media, and biomedicine, due to their magnetic properties and environment-friendliness.
In the present contribution, we report on the in situ investigation of an iron oxide nanoparticle synthesis by coupled X-ray absorption near-edge structure (XANES) and small-angle X-ray scattering (SAXS). The combination provides simultaneously information about the size of particles (SAXS) and on the oxidation state and the local structure of the iron atoms (XANES). The co-precipitation synthesis was exemplary studied, using a stabilization agent to decelerate the fast precipitation of the iron oxides. This allows to detect intermediates in situ. The measurements were performed using a custom-made acoustic levitator as sample holder. From the data, a mechanism was derived indicating different phases of particle Formation and oxidation state changes.
Time- and space-resolved in situ LIBS measurements of chemical compositions during TIG-welding
(2017)
An in situ monitoring of chemical compositions in the weld pool and the heat affected zone (HAZ) can enable the control of the welding process through the regulation of the welding parameters, and thus can prevent possible weld defects.
The most critical parameter for hot cracking -from a metallurgical point of view- is the chemical composition of the weld pool.
Chemical composition can be measured and quantified during the welding process with the LIBS technique having the appropriate calibration measurements.
We report on the in situ investigation of the Al13 sulfate synthesis by WAXS. Al13 sulfates were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using an acoustic levitator. The study provides information about the intermediates during the crystallization process.
The ability to penetrate dielectric materials makes T-rays attractive to reveal discontinuities in polymer and ceramic materials. Changes of travelling time (ToF) and pulse shape due to the interactions of THz pulses with the dielectric material and its inherent discontinuities can be observed. A tomogram of the object under the test can be reconstructed from time of flight diffraction (ToFD) scans if a synthetic focusing aperture (SAFT) algorithm is applied.
THz and mid IR spectroscopy of high-molecular PE (HMW) and ultra high-molecular PE (UHMW) reveals modifications of the molecular structure. Characteristic absorption bands are changed if the two materials are exposed by -Co60 radiation up to 600 kGy and subsequently stored at an annealing temperature of 398 K until for 729 days. UHMW-PE and HMW-PE behave differently during the ageing process because of their molecular weight and inherent structure distinctions. The spectroscopic data offer characteristic absorption bands, which have been used to describe the complete ageing process in more detail. For instance, the integral absorption in the B1u THz-region can be used to describe quantitatively the reduction of crystallinity. The formation of trans vinylene unsaturation and the decay of vinyl during ageing can be observed in detail in the mid IR range.
In order to reduce CO2 emissions fossil fuelled power stations with high combustion efficiency are being developed. The increase of the operating temperature, a common way to improve combustion efficiency, leads to enhanced corrosion of heat exchange steel tubes in the power plants. Within the framework of the European project “Production of Coatings for New Efficient and Clean Coal Power Plant Materials” (POEMA)", high temperature corrosion protection coatings are now under investigation.
Thin porous sol-gel alumina films are promising candidate coating materials. Coatings were prepared by applying boehmite sols on grinded steel P92 and subsequent heat treatments at temperatures up to 650 °C. Thus a porous layer of worm-like particles was formed consisting of nano-crystallites and amorphous alumina. A dense interface with satisfying adhesion resulted from diffusion of chromium and iron ions out of the steel into the porous coating. However, the film locally exhibited some cracks caused by steep edges in the grinded steel surface. An appropriate substrate pretreatment should avoid this problem.
The protection of the steel relies on the barrier function of the alumina coating and the formation of a dense chromia layer at the steel surface.
To date, there are very few technologies available for the conversion of low-temperature waste heat into electricity. Thermomagnetic generators are one approach proposed more than a century ago. Such devices are based on a cyclic change of magnetization with temperature. This switches a magnetic flux and, according to Faraday’s law, induces a voltage.
Here we give an overview on our research, covering both materials and systems. We demonstrate that guiding the magnetic flux with an appropriate topology of the magnetic circuit improves the performance of thermomagnetic generators by orders of magnitude. Through a combination of experiments and simulations, we show that a pretzel-like topology results in a sign reversal of the magnetic flux. This avoids the drawbacks of previous designs, namely, magnetic stray fields, hysteresis and complex geometries of the thermomagnetic material.
Though magnetocaloric materials had been the first choice also for thermomagnetic generators, they require some different properties, which we illustrate with Ashby plots for materials selection. Experimentally we compare La-Fe-Co-Si and Gd plates in the same thermomagnetic generator. Furthermore, we discuss corrosion and deterioration under cyclic use is a severe problem occurring during operation. To amend this, composite plates using polymer as a matrix have been suggested previously.
Additive manufacturing (AM) opens the route to a range of novel applications.However, the complexity of the manufacturing process poses a challenge for the production of defect-free parts with a high reliability. Since process dynamics and resulting microstructures of AM parts are strongly influenced by the involved temperature fields, thermography is a valuable tool for process surveillance. The high process temperatures in metal AM processes allow one to use cameras usually operating in the visible spectral range to detect the thermally emitted radiation from the process. In our work, we compare the results of first measurements during the manufacturing processes of a commercial laser metal deposition (LMD) setup and a laser beam melting (LBM) setup using a MWIR camera with those from a VIS high-speed camera with band pass filter in the NIR range.
Introduction/purpose:
Multi-principal-element alloys (MPEAs), also known as complex concentrated alloys (CCAs), have recently come to the attention of the scientific community due to some interesting and unexpected microstructures, and their potential for improving properties such as, e.g. mechanical strength and oxidation resistance in high temperature structural applications. The AlMo0.5NbTa0.5TiZr refractory (r)CCA is one such candidate, showing a two-phase microstructure after a two-stage heat treatment under argon atmosphere at a controlled cooling rate. Since the application conditions intended for this alloy require a long-term high temperature (> 700 °C) mechanical and oxidation resistance, it becomes necessary to assess the possible phase development in this regime.
Methods:
In this contribution, the CALPHAD method is used to calculate phase equilibria for the AlMo0.5NbTa0.5TiZr CCA in the presence and absence of oxygen. Equilibrium phase amount evolution with temperature and Scheil Model for solidification (e.g. Fig.1a and Fig.1b, respectively) are analyzed, which are obtained using the databases TCNI9 and TTNI7 and the Gibbs energy minimizer in the Thermo-Calc software.
Results:
The diagrams reveal that two BCC-based phases could form during alloy solidification, where one phase would be enriched with Mo, Nb and Ta while the other phase, with Al, Ti and Zr. Activity oxides diagrams show that a stable form of aluminum oxide (α-Al2O3, Pearson symbol: hR10, corundum) can be formed. Results obtained by both databases, as well as discrepancies between property phase and Scheil approaches are discussed on the base of experimental results.
Conclusions:
A modeling tool is used to support alloy characterization and development, providing also the possibility to feedback information to improve existing thermodynamic databases.
Thermodynamic study of a refractory complex concentrated alloy (rCCA) using the CALPHAD method
(2019)
Multi-principal-element alloys (MPEAs), have recently come to the attention of the scientific community due to their potential for improving properties such as, e.g. mechanical strength and oxidation resistance in high temperature structural applications. The AlMo0.5NbTa0.5TiZr refractory (r)CCA is one such candidate, showing a two-phase microstructure after a two-stage heat treatment under argon atmosphere at a controlled cooling rate. Since the application conditions intended for this alloy require a long-term high temperature (> 700 °C) mechanical and oxidation resistance, it becomes necessary to assess the possible phase development in this regime. The diagrams reveal that two BCC-based phases could form during alloy solidification, where one phase would be enriched with Mo, Nb and Ta while the other phase, with Al, Ti and Zr. Activity oxides diagrams show that a stable form of aluminum oxide (α-Al2O3, Pearson symbol: hR10, corundum) can be formed.
Argyrodite-type materials have lately sparked a lot of research interest due to their thermoelectric properties.One promising candidate is canfieldite (Ag8SnS6), which has a Pna21 orthorhombic crystal structure at room temperature (RT). Recently, a new low-temperature (LT) phase transition of canfieldite at 120K has been found. Here, we investigate structural, vibrational and thermodynamic properties of Ag8SnS6 at room- and low-temperature employing density functional theory (DFT) and lattice dynamics computations. Thermal properties calculations were based on the quasi-harmonic approximation (QHA) as implemented in phonopy. We achieve good agreement with experiments. Thermal properties such as the constant-pressure heat capacity (Cp) and thermal conductivity are very close to experimental measurements. Furthermore, we compared RT and LT Ag8SnS6 Grüneisen parameters with argyrodites analogues, Ag8XS6 (X = Sn, Si, Ge), to arrive at an improved
Argyrodite-type materials have lately sparked a lot of research interest due to their thermoelectric properties. One promising candidate is canfieldite (Ag8SnS6), which has a Pna21 orthorhombic crystal structure at room temperature (RT). Recently, Slade group found a new low-temperature (LT) phase transition of canfieldite at 120K. Therefore, we investigate structural, vibrational and thermodynamic properties of Ag8SnS6 at room- and low-temperature employing density-functional theory (DFT) and lattice dynamics computations. Thermal properties calculations were based on the quasi-harmonic approximation (QHA) as implemented in phonopy. We achieve good agreement with experiments. Lattice parameters were overestimated by 2%, and thermal properties such as the constant-pressure heat capacity Cp are very close to experimental measurements. Our simulations also reveal a possible new phase transition at around 312 K. Furthermore, we compared RT and LT Ag8SnS6 Grüneisen parameters with some argyrodites analogues, Ag8TS6 (T = Si, Ge, Ti and Sn), finding a relationship between the anharmonicity and low thermal conductivity.
Ultra high performance concrete (UHPC) is known for its high compressive strength of more than 150 MPa and its high durability. Thermal treatment at 90°C can accelerate the strength development so that the 28-days-strength can be achieved immediately after the treatment and an additional increase up to 30 % in some cases. The reason for the strength development is an accelerated hydration of the clinker minerals and an intensified pozzolanic reaction leading to a denser microstructure.
In previous research inhomogeneities in form of a zonation after unprotected thermal treatment were observed and analysed in respect to changes in the microstructure. This zonation is defined by a different microstructure in the core compared to the outer zone in the matter of porosity, mineral phase composition and a significant change in the potassium and sulphur concentration of the zones is measurable.
To isolate different transport mechanisms responsible for these element distributions UHPC samples were thermally treated at 90 °C and the microstructure was investigated under dry conditions and after immersion in water to investigate the influence of dehydration during and rehydration after the thermal treatment on the microstructure. Through durability testing via water absorption, water vapour diffusion, permeability testing and sulfuric acid resistance transport mechanisms like diffusion, migration, capillary suction are under investigation in correlation with the microstructure analysis. For the microstructure analysis measurements with µXRF, mercury intrusion porosity, XRD and SEM were conducted.
Nanocomposites are extremely versatile due to their physicochemical properties, which differ significantly from bulk homopolymers. One of the inorganic nanomaterials which are increasingly used as a filler in polymer matrices is boehmite, typically used as an inexpensive flame retardant. Here, it is used as a nanofiller in polycarbonate and polyamide, expecting to improve their mechanical properties. For industrial use boehmite is obtained by the solvothermal method, resulting in a layered nanomaterial, whereas naturally it occurs as single crystals with the size of <100µm. In this work we are obtaining and isolating boehmite crystals by a bottom-up method, in which a reaction between aluminum nitride and sodium hydroxide. Obtaining boehmite as microcrystals is necessary for its analysis and characterization, as well as to investigate its interaction with polymer matrices at the polymer/particle interface. Here, the obtained particles in polymer matrices are characterized with differential scanning calorimetry and thermogravimetry analysis.
Nanocomposites are extremely versatile due to their physicochemical properties, which differ significantly from bulk homopolymers. One of the inorganic nanomaterials which are increasingly used as a filler in polymer matrices is boehmite, typically used as an inexpensive flame retardant. Here, it is used as a nanofiller in polycarbonate and polyamide, expecting to improve their mechanical properties. For industrial use boehmite is obtained by the solvothermal method, resulting in a layered nanomaterial, whereas naturally it occurs as single crystals with the size of <100µm. In this work we are obtaining and isolating boehmite crystals by a bottom-up method, in which a reaction between aluminum nitride and sodium hydroxide. Obtaining boehmite as microcrystals is necessary for its analysis and characterization, as well as to investigate its interaction with polymer matrices at the polymer/particle interface. Here, the obtained particles in polymer matrices are characterized with differential scanning calorimetry and thermogravimetry analysis.
In the course of the energy transformation from fossil fuels to renewable energy sources, the use of hydrogen as fuel and energy storage can play a key role. This presents new challenges to industry and scientific community alike.
The storage and transport of hydrogen, which is nowadays mainly realised by austenitic stainless steels, remains problematic. That is due to the degradation of mechanical properties and the possibility of phase transformation by hydrogen diffusion and accumulation. Development of materials and technologies requires a fundamental understanding of these degradation processes. Therefore, studying the behaviour of hydrogen in austenitic steel contributes to an understanding of the damage processes which is crucial for both life assessment and safe use of components in industry and transportation.
As one of the few tools that is capable of depicting the distribution of hydrogen in steels, time-of-flight secondary ion mass spectrometry (ToF-SIMS) was conducted after electrochemical charging. To obtain furthermore information about the structural composition and cracking behaviour, electron-backscattered diffraction (EBSD) and scanning electron microscopy (SEM) were performed. Gathered data of chemical composition and topography was treated employing data fusion, thus creating a comprehensive portrait of hydrogen-induced effects in the austenite grade AISI 304L.
Specimens were electrochemically charged with deuterium instead of hydrogen. This arises from the difficulties to distinguish between artificially charged hydrogen and traces existing in the material or the rest gas in the analysis chamber. Similar diffusion and permeation behaviour, as well as solubility, allow nonetheless to draw conclusions from the experiments.
In the present study, internal damage to an AlSi12CuMgNi alloy reinforced with planar random Al2O3 short fibres was investigated after compression testing. Due to the alloy composition, this composite contains a second reinforcement phase in the form of eutectic Si, which builds interpenetrated networks in the volume and increases the creep resistance and load-bearing capacity of the material. Materials with their fibre plane parallel and transversal to the load direction were characterized in order to investigate the dependence of load partition and damage on fibre plane orientation. In-situ compression testing during neutron diffraction measurements showed that internal damage is strongly influenced by the load partition between matrix and reinforcement. Moreover, micro-computed tomography was performed in the same material after ex-situ compression for damage analysis. In the case of a fibre plane perpendicular to the applied load, breakage and interconnected cracks appeared in a significantly higher volume fraction than with a fibre plane parallel to load.
The microstructure of weld overlay Ni - base alloy deposited on carbon steel by laser QS-Nd:YAG
(2017)
Ni- base alloys are used as a one of the most important coating material and can be applied in a different environments and elements of devices having various applications. To protect the surface of the material from aggressive gases at high temperature, there are use different kinds of the Ni- base alloys. One of such alloy is Ni-Cr-Mo-W called commercial Inconel 686. This alloy based on NiCr22Mo9Nb (Inconel 625), in which content of molybdenum increased and niobium was replaced with the addition of tungsten, in order to counteract the strong segregation in the microstructure, which results in homogeneity of the chemical composition of the structure. Inconel 686 is also characterized by greater resistance to high temperature corrosion and heat resistance than Inconel 625. The Inconel 686 alloy was deposited on 13CrMo4-5 steel by laser QS - Nd:YAG. In the poster the microstructure (SEM) and chemical composition (EDS) of obtained weld overlays were investigated.
The Influence of the Temperature Gradient on the Distribution of Residual Stresses in AM AISI 316L
(2019)
Steep temperature gradients and solidification shrinkage are the main contributors to the formation of residual stresses in additively manufactured metallic parts produced by laser beam melting. The aim of this work was to determine the influence of the temperature gradient.
Diffraction results show a similar pattern for both specimens, indicating the shrinkage to be more dominant for the distribution of residual stresses than the temperature gradient. Thermography results imply that a higher energy input result in higher compressive residual stresses in the bulk.
Colloidal semiconductor nanoparticles with a spherical core and an elongated shell form bright emitters with a high absorption cross section. They show great potential for a multitude of optoelectronic applications such as LEDs or photovoltaic cells and can be used as gain material or as markers for bio imaging. For most of these applications high fluorescence quantum yields are a figure of merit for the emitter quality. In this work we investigate how the ensemble quantum yield is affected by the properties of the individual particles. In particular, we prove the role of non-emitting particles as well as the role of blinking. Using a combination of AFM and spatially resolved photoluminescence spectroscopy we measured hundreds of individual CdSe/CdS dot/rod particles of different shell lengths exciting with two different excitation wavelengths for shell or core excitation, respectively.
Ferritic steels with Cr-contents up to 13 wt. % are used as heat exchanger or boiler tube materials in combustion based power plants. These materials are subject to aggressive corrosion caused by the reaction of the steel with highly corrosive gases under high temperatures up to 650°C. The early stages of corrosion and sulfidation especially and the influence of the Cr-content in the alloy are thereby not understood but of fundamental interest.
Our work shows corrosion mechanisms and presents corrosion models for Fe and different Fe-Cr-alloys under pure SO2 und SO2+O2 atmospheres for different time scales. Modell alloys of high purity are used to focus on the reaction of the intended elements: Fe, Cr, S, and O. Long-time experiments (≥12h) took place in tube furnaces and short-time experiments (≥5min) in a special designed light furnace. Heating and cooling took place under inert atmosphere. The reactive gases were added not until the experimental temperature was reached. Samples were analyzed using high resolution synchrotron X-ray diffraction using a micro focus setup and electron microscopy including FIB.
Many earlier studies on corrosion and sulfidation on iron based alloys show a higher corrosion rate and material loss when sulfur was present in the atmosphere. In contrast, later studies propose an inhibiting effect of sulfur containing atmospheres. On the one side, most likely due to the formation of a protective layer of Mx(SO4)y -phases at the scale-gas interface. On the other side, a very recent study proposes the theory that MxSy-phases limit the further diffusion of elements. Up to now, no Mx(SO4)y –phases were detected in our samples, but sulfide phases nucleated within the oxide phases. For pure Fe our samples show FeS at the scale-metal interface working as a diffusion barrier for Fe-Cations from the base material in to the oxide scale. The above lying spalled off oxide-sulfide scale shows a wide area of small voids and accumulations of FeS-Crystals at the bottom. Under the main oxide scale a second generation of oxide-sulfide scale starts to form. For the Fe-Cr-alloys the inner oxide scale only shows FeS- and CrS-phases surrounded by hollow space. The here presented study will explain and discuss a new growth model for the shown phenomenon.
Different environmental samples reveal that methanogenic Archaea are part of a
multi-species biofilm on corroding metallic structures (Fig. 1). Studies on microbial
influenced corrosion (MIC) focus mainly on sulphate reducing Bacteria (SRB),
leading to the assumption that they are exclusively responsible for metal corrosion.
In fact, methanogenic Archaea are known to be involved in metal corrosion as well
(e.g.Methanococcus maripaludis DSM 2067). In some cases SRB and methanogenic
Archaea have comparable high corrosion rates. However, the underlying
mechanisms causing corrosion are still unknown. The goal of this study is to
analyse two environmental isolates (M. maripaludis DSM 2067, M. maripaludis
KA1) and two human-related isolates (Methanobrevibacter oralis and
Methanobrevibacter smithii) for their ability to deteriorate/transform metals,
which are relevant for technical and clinical applications. Moreover, the studies will
provide essential information on the interaction mechanisms of human-related
Archaea, which are frequently found in peri-implantitis, with dental material such
as implants, crowns and bridges leading to their degradation/transformation.
Microbiologically influence corrosion (MIC) has become a big concern due the increased usage of different metals by our society. Microorganisms can use metal as an electron donor, causing unpredictable but serious damages. Nowadays it is known that besides sulfate reducing bacteria (SRB), other microorganisms including acetogens, iron oxidizers and methanogens can also induce MIC. Current studies related to methanogen-induced MIC (MI-MIC) mainly focused on environmental isolates from the oil and gas industry (e.g. Methanococcus maripaludis) with industrial materials e.g. iron. However, MI-MIC can occur in many other environments as well, including the oral cavity. Methanobrevibacter oralis is a methanogen isolated from the human oral cavity and was found more frequently in patients suffering from peri-implantitis/periodontitis. Titanium-implants removed from those patients have also showed clear signs of corrosion. The aim of our study is to establish and analyze corrosion potentials of dental metals (e.g. titanium) by oral methanogens. Periodontal pockets samples from patients suffering from periodontitis/peri-implantitis were taken for methanogenic and SRB enrichments. Stainless steel, pure titanium or Ti-6Al-4V alloy was used for corrosion studies. Corrosion rates and methane production were measured using weight-loss method and gas chromatography, respectively. Metal surfaces were visualized with scanning electron microscopy. Microbial communities in the dental pockets of healthy people and patients will be compared using 16S rRNA amplicon sequencing. Overall, this is the first study investigating the susceptibility of different dental implant materials to corrosion using human-related Archaea. The outcomes of this study can be further explored for a variety of clinical applications.
The interest to additively manufacture Nickel-based superalloys has substantially grown within the past decade both academically and industrially. More specifically, additive manufacturing processes such as laser powder bed fusion (LPBF) offer the ability to produce dense parts within a single manufacturing step. In fact, the exceptional freedom in design associated with the layer-based nature of the processes is of particular interest for the complex shapes typically required in turbine applications. In certain cases, the overall part performance can be achieved by tailoring the microstructure and the crystallographic texture to the specific application. However, these advantages must be paid at a price: the large local temperature gradients associated with the rapid melting and solidification produce parts that inherently contain large residual stress in the as-manufactured state. In addition, the presence of pores in the final part may further affect the in-service part failure. As among Nickel-based alloys Inconel 718 exhibits excellent weldability, this alloy has been widely studied in open research in the domain of LPBF. However, significant microsegregation of the heavier alloying elements such as Niobium and Molybdenum accompanied by dislocation entanglements may preclude the application of conventional heat treatment schedules. Therefore, different post processing heat treatments are required for laser powder bed fused Inconel 718 as compared to conventional variants of the same alloy.
In this study, we investigated two different heat treatment routes for LPBF Inconel 718. In a first routine, the samples were stress relieved and subsequently subjected to hot isostatic pressing (HIP) followed by a solution heat treatment and a two-step age (referred to as FHT). In a second routine, the samples were subjected to a single-step direct age post stress relieving heat treatment (referred to DA). We investigated the consequences of such heat treatment schedules on the microstructure, texture, and mechanical behavior. We show that by applying a DA heat treatment the typical columnar microstructure possessing a crystallographic texture is retained, while an equiaxed untextured microstructure prevails in case of an FHT heat treatment. We further evaluate how these heat treatments affect the mechanical behaviour on the macroscopic and microscopic scale.
A number of environmental monitoring projects were performed on historic stained-glass windows in Germany. The quality of the protective glazing was assessed by recording environmental parameters in the interspace between the original and the protective glazing and on the inside of the original window. For this purpose, temperature, humidity and air velocity were measured. Particles were sampled with different methods and analysed by scanning electron microscopy combined with energy dispersive X-ray spectroscopy to determine their chemical composition. The effect of particles on model glass samples was investigated in climate chambers under accelerated weathering conditions.
The oxygen reduction reaction (ORR) – an important reaction in electrochemical devices, such as fuel cells - is characterized by its sluggish kinetics and therefore requires catalysis. The industry currently relies on platinum as a catalyst, although it is scarce and expensive, hindering the commercial breakthrough of fuel cells in automotive applications. Platinum-free catalysts on basis of nitrogen- and metal doped carbons (NMCs) and fluorinated carbons are promising materials to replace platinum-based catalysts for the ORR. In this work we prepared six metal-organic frameworks (MOFs) by mechanical ball mill grinding and studied their formation by in-situ powder X-ray diffraction. Furthermore, the samples were carbonized under controlled conditions (900°C, 1h, N2-atmosphere) to yield carbon materials, that were employed in ORR-electrocatalysis. The effect of Co-doping and fluorination was systematically studied and outstanding ORR activity was found for the catalyst prepared from the Co-doped fluorinated ZIF-8.
A central challenge to ensure the sustainable production and use of nanotechnologies is to understand and effectively control the risks along the industrial innovation value chain. Knowledge about nanotechnology processes and nanosafety issues (hazards, fate, risk...) is growing rapidly but the effective use of this knowledge for risk management by market actors is lagging behind.
EC4SafeNano (European Centre for Risk Management and Safe Innovation in Nanomaterials and Nanotechnologies) promotes a harmonized vision of expertise in risk assessment and management for the public and private sectors to enable the safe development and commercialization of nanotechnology.
EC4SafeNano is operated together by major European risk institutes with the support of numerous associated partners, gathering all stakeholders involved in Nanomaterials and Nanotechnologies (regulators, industry, society, research, service providers...).
In a case study the surface chemical transformations upon 2 different ageing procedures (long-term UV irradiation or swimming pool water) of a representative set of titanium dioxide nanoparticles has been investigated. The materials have been analyzed by various analytical techniques. Each method addresses different aspects of the complex endpoint surface chemistry. The multi technique approach allows evaluation of the capabilities and limitations of the applied methods regarding their suitability to address the endpoint surface chemistry and their sensitivity to identify even small surface chemical transformations.
Results:
- To obtain a comprehensive picture, it is insufficient to concentrate on a single analysis technique.
- By using time-of-flight secondary ion mass spectrometry (ToF-SIMS) in combination with principal component analysis (PCA) it was possible to identify even subtle changes in the surface chemistry of the investigated materials.
- A general trend that was observed for the UV-aged samples is the decrease of organic material on the nanomaterial surface.
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 723623.
Maintaining a consistent product quality is critical for the thin film industry. Therefore, the development of highly accurate protocols able to detect variations and nonidealities in manufactured thin film devices is essential and helps improve production quality and decrease manufacturing costs. The present work will discuss the accuracy and reproducibility in the determination of the thickness of thin films relevant for optoelectronic industry using spectroscopic ellipsometry, starting with the importance of set-up calibration, the need for very well defined calibration standards suitable for real devices and not least, the importance of accurate data analysis. As ellipsometry is an indirect method and theoretical modelling is needed to obtain the desired information regarding the investigated samples (e.g. thickness, roughness, optical constants), the model uncertainty has to be discussed and taken into account. If for ideal samples consisting of single layers with well-known optical constants the determination of thickness and roughness is straight forward and pretty accurate, for real samples, more complex theoretical models are needed and extracting accurate information regarding the samples can be very challenging. With careful calibration and a multidisciplinary approach, a combined measurement methodology can be developed enabling reliability, comparability, and accuracy. For production-relevant operation, maintaining the ease of use and scalability of ellipsometry as a technique can also be retained.
The results are based on data1. Figure 3 displays temperatures of the tank wall and of the gas phase over testing time. It can be seen that a complete coating strongly delayed the heating of tank wall and gas phase, whereas the partly coated tanks only had a minor influence on temperature development. There was no significant difference between a half coated and a thirdly coated tank measurable. Figure 4 shows the internal pressure of tanks over testing time. Only the fully coated tank enabled a low pressure over 90 min testing time. Hence, a complete coating is necessary to guarantee the fire safety of hazmat tanks and a partly coating is not sufficient.
The particle size distribution is considered the most relevant information for nanoscale property identification and material characterization. The current OECD test guideline on particle size and size distribution (TG 110) is not applicable to ‘nano-sized’ objects. In this project we thus develop a new OECD test guideline for the measurement of the size and size distribution of particles and fibers with at least one dimension in the nanoscale. A fiber is defined as an object having an aspect ratio of length/diameter l/d >3. The width and length of each fiber should be measured concurrently.
In order to measure the particle size distributions, many techniques are available. 9 methods for particles and 2 methods for fibres have been tested in a prevalidation study and appropriate methods will be compared in an interlaboratory round robin test starting in February 2019.
The movement of the macroscopic magnetic moment in ferromagnetic systems can be described by the Landau-Lifshitz (LL) or Landau-Lifshitz-Gilbert (LLG) equation. These equations are strictly valid only at absolute zero temperature. To include temperature effects a stochastic version of the LL or LLG equation for a spin density of one per unit cell can be used instead. To apply the stochastic LL to micromagnetic simulations, where the spin density per unit cell is generally higher, a conversion regarding simulation cell size and temperature has to be established. Based on energetic considerations, a conversion for ferromagnetic bulk and thin film systems is proposed. The conversion is tested in micromagnetic simulations which are performed with the Object Oriented Micromagnetic Framework (OOMMF). The Curie temperatures of bulk Nickel, Cobalt and Iron systems as well as Nickel thin-film systems with thicknesses between 6.3 mono layer (ML) and 31ML are determined from micromagnetic simulations. The results show a good agreement with experimentally determined Curie temperatures of bulk and thin film systems when temperature scaling is performed according to the presented model.
The movement of the macroscopic magnetic moment in ferromagnetic systems can be described by the Landau-Lifshitz (LL) or Landau-Lifshitz-Gilbert (LLG) equation. These equations are strictly valid only at absolute zero temperature. To include temperature effects a stochastic version of the LL or LLG equation for a spin density of one per unit cell can be used instead. To apply the stochastic LL to micromagnetic simulations, where the spin density per unit cell is generally higher, a conversion regarding simulation cell size and temperature has to be established. Based on energetic considerations, a conversion for ferromagnetic bulk and thin film systems is proposed. The conversion is tested in micromagnetic simulations which are performed with the Object Oriented Micromagnetic Framework (OOMMF). The Curie temperatures of bulk Nickel, Cobalt and Iron systems as well as Nickel thin-film systems with thicknesses between 6.3 mono layer (ML) and 31ML are determined from micromagnetic simulations. The results show a good agreement with experimentally determined Curie temperatures of bulk and thin film systems when temperature scaling is performed according to the presented model.
The arrangement of the measuring sensors allowed the
capture of air flow induced temperatures and material
temperatures on various points of the cylinder body. Four
significant temperature levels could be observed: Inside the cylinder (far from the wall, close to the wall), inside the aluminium liner and outer surface. Figure 5 shows the temperature distribution after a regular filling process with a filling time of ten minutes. The temperature sensors T1 - T9 are marked with different colors. The corresponding measurement points are shown in Figure 4. Due to the high thermal conductivity of the aluminum liner the induced temperature peaks are quickly derived. A flow-induced exceeding of the maximum approval temperature is not expected. Regarding the safety assessement the results show that the pressure and temperature profilesmustbe taken into account.
In special cases of angle beam ultrasonic measurement the applied transducer has to withstand extreme temperatures. Since the irradiation angle depends on the speed of sound in both the wedge material and the tested object, the developer must take into account the speed of Sound in a wedge material over the whole temperature range of transducers application.
This work aims to investigate the role of F-F and F-π interactions in dictating structural and mechanical properties, through a combination of X-ray powder diffraction and dispersion-corrected density functional. As no benchmarking data exist for F-dominating organic system, we first assess how different functionals affect the mechanical properties of the material.
ZrF4 species have shown to exhibit hard Lewis acidity in homogeneous systems. In order to study solid state Lewis acidic ZrF4 a sol-gel synthesis was adapted following previous approaches for AlF3 and a necessary post fluorination is being optimised to obtain a Lewis acidic heterogeneous catalyst for C-F bond activation. The influence of different Zr precursors was also studied while the local coordination sphere of a active species was found to be similar to β-ZrF4 using EXAFS of the Zr K-edge.
The synthesis of hybrid inorganic/organic copolymers, using reversible deactivation radical polymerization (RDRP) techniques, has been an intensively studied research topic over recent years. A plethora of hybrid inorganic/organic copolymers were synthesized, including hybrid inorganic/organic block copolymers as well as random copolymers,[1–4] that showed great potential in fabricating hybrid (nano)materials with tailored properties [5]. Two widely employed RDRP techniques to prepare such hybrid inorganic/organic copolymers are atom transfer radical polymerization (ATRP) [1,2] and reversible addition-fragmentation chain transfer (RAFT) polymerization [3,4]. In order, to afford hybrid inorganic/organic copolymers with narrow dispersity, high conversions and precise structures, it is required to choose proper reaction conditions. Due to the importance of both ATRP and RAFT in the preparation of such hybrid polymers, we aim to compare both RDRP techniques by preparing 2-acetoxyethyl methacrylate (AcEMA) and 3-(triethoxysilyl)propyl methacrylate (TESPMA) based homopolymers. For this purpose, AcEMA and TESPMA were polymerized in 1,4-dioxane at 60 °C mediated by CuBr/N,N,N',N'-pentamethyldiethylenetriamine (PMDETA) and 2-(2-carboxylethylsulfanylthiocarbonyl-sufanyl) propionic acid (TTC) as well as cumyl dithiobenzoate (CDB) to evaluate the suitability and reliability of ATRP and RAFT to prepare such hybrid (co)polymers.