Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Posterpräsentation (780) (entfernen)
Sprache
- Englisch (648)
- Deutsch (131)
- Französisch (1)
Schlagworte
- Corrosion (36)
- Additive manufacturing (29)
- Mechanochemistry (24)
- Glass (20)
- Nanoparticles (19)
- Additive Manufacturing (17)
- Crystallization (17)
- Degradation (14)
- Fluorescence (14)
- In situ (14)
- Computed tomography (13)
- Residual stress (13)
- Korrosion (12)
- Biofilm (11)
- Hydrogen (11)
- Laser-induced periodic surface structures (LIPSS) (11)
- Microstructure (11)
- SAXS (11)
- Catalysis (10)
- Methanogens (10)
- Nanoparticle (10)
- Sintering (10)
- Thermography (10)
- X-ray refraction (10)
- Boehmite (9)
- Stainless steel (9)
- Cocrystal (8)
- Computed Tomography (8)
- KorroPad (8)
- Laser powder bed fusion (8)
- Quality assurance (8)
- AFM (7)
- Corrosion resistance (7)
- EPR (7)
- Heat treatment (7)
- Nichtrostender Stahl (7)
- PE-HD (7)
- Selective laser melting (7)
- Synthesis (7)
- 316L (6)
- Amorphous phases (6)
- Automation (6)
- Creep (6)
- DNA (6)
- Dosimetry (6)
- Electron microscopy (6)
- Femtosecond laser ablation (6)
- Geant4 (6)
- Heterogeneous catalysis (6)
- MIC (6)
- MOFs (6)
- Microdosimetry (6)
- Neutron diffraction (6)
- Oxidation (6)
- Phosphates (6)
- Polymer (6)
- Polymorphism (6)
- Prüfmethode (6)
- Qualitätssicherung (6)
- Simulation (6)
- ToF-SIMS (6)
- Welding (6)
- Aluminium (5)
- Archaea (5)
- C-F bond activation (5)
- Coarsening (5)
- DFT (5)
- Dielectric spectroscopy (5)
- Duplexstahl (5)
- Dye (5)
- FTIR (5)
- Gefahrgut (5)
- Gefahrstoff (5)
- LEE (5)
- Laser Powder Bed Fusion (5)
- Milling (5)
- Nanocomposite (5)
- Nanocomposites (5)
- Niobium carbide (NbC) (5)
- Polymorph (5)
- Quantum dot (5)
- Radiation damage (5)
- Reference material (5)
- Self-healing (5)
- Silver nanoparticles (5)
- Struvite (5)
- ThermoCalc (5)
- Thin films (5)
- Transition metal (5)
- Transmission electron microscopy (5)
- UHPC (5)
- Wear (5)
- XANES (5)
- Ageing (4)
- AlSi10Mg (4)
- AuNP (4)
- Bioactive (4)
- Composite-Druckgefäße (4)
- Concrete (4)
- Corrosion testing (4)
- Crack growth (4)
- DCB (4)
- DNA damage (4)
- Diesel (4)
- Digitalisierung (4)
- Discotic Liquid Crystals (4)
- Energy deposit (4)
- FAIR (4)
- Fatigue (4)
- Flexible crystals (4)
- Friction (4)
- Geant4-DNA (4)
- Graphene (4)
- Hardness (4)
- Hydrogen assisted cracking (4)
- Implants (4)
- Inconel 686 (4)
- Iron oxide nanoparticles (4)
- LIBS (4)
- Laser Beam Melting (4)
- Laser profilometry (4)
- Low energy electrons (4)
- MCS (4)
- Metal phosphonates (4)
- Microplastic (4)
- Monte-Carlo simulation (4)
- NMR (4)
- Nano (4)
- Nanoconfinement (4)
- Nanoplastic (4)
- Pitting corrosion (4)
- Polymers (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- Ringversuch (4)
- SEM (4)
- Spectroscopic ellipsometry (4)
- Steel (4)
- Sulfidation (4)
- Synchrotron (4)
- TEM (4)
- TiO2 (4)
- Tribology (4)
- Upconversion (4)
- Validierung (4)
- X-ray diffraction (4)
- XRD (4)
- 3D High-temperature shape screening (3)
- AM (3)
- Ab-initio (3)
- Additive Fertigung (3)
- Alloy 2618A (3)
- Assay (3)
- Bending modulus (3)
- Beta decay (3)
- Biodiesel (3)
- Bitumen (3)
- Bonding analysis (3)
- Brachytherapy (3)
- Cancer treatment (3)
- Carbon nanotubes (3)
- Cermets (3)
- Clustered nanoparticles (3)
- Coating (3)
- Computational Chemistry (3)
- Conductivity (3)
- Corundum grinding (3)
- Dangerous goods (3)
- Database (3)
- Diffusion coefficient (3)
- EBSD (3)
- Ellipsometry (3)
- Environmental Simulation (3)
- Epoxy (3)
- Flourescence (3)
- Flow cytometry (3)
- Glass ceramic (3)
- Glass composition (3)
- Gold Nanoparticles (3)
- Imaging (3)
- Korrosionsbeständigkeit (3)
- Korundschleifen (3)
- LCF (3)
- Laser cladding (3)
- Laser implantation (3)
- Livermore model (3)
- Luminescence (3)
- MIPs (3)
- Machine learning (3)
- Martensitic stainless steels (3)
- Materialcharakterisierung (3)
- Materials Informatics (3)
- Mesoporosity (3)
- Metallographie (3)
- Metrology (3)
- Microbial induced corrosion (3)
- Microbiologically influenced corrosion (3)
- Micropatterning (3)
- Microplastics (3)
- Microscopy (3)
- Monitoring (3)
- NDT (3)
- NP (3)
- NTE (3)
- Nanofibers (3)
- Nanomaterial (3)
- Nichtrostende Stähle (3)
- OECD (3)
- OER (3)
- OH radical (3)
- Oberflächenbearbeitung (3)
- Optical spectroscopy (3)
- Orientation (3)
- Oxygen Reduction Reaction (3)
- PGM-free catalyst (3)
- PXRD (3)
- Penelope model (3)
- Phase grating (3)
- Polydopamine (3)
- Polyethylene (3)
- Polymer blends (3)
- ProMoAM (3)
- Quantum dots (3)
- REACH (3)
- Radiation therapy (3)
- Radiolysis (3)
- Raman Spectroscopy (3)
- Reactive extrusion (3)
- Reference data (3)
- Residual Stress (3)
- Rigidity (3)
- Röntgenrefraktion (3)
- SLM (3)
- Sample preparation (3)
- Schadensanalyse (3)
- Schweißen (3)
- Sensibilisierung (3)
- Sialic acid (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- Specific heat spectroscopy (3)
- Strahlen (3)
- Surface chemistry (3)
- Synchrotron tomography (3)
- TDEP (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermoelectrics (3)
- Thin Films (3)
- Thin polymeric films (3)
- Ti-6Al-4V (3)
- Two-photon polymerisation (3)
- VSSA (3)
- Vickers (3)
- WAXS (3)
- Waveguide (3)
- Wärmebehandlung (3)
- X-ray fluorescence (3)
- XPS (3)
- ZCF (3)
- ZrF4 (3)
- particle scattering (3)
- 3D (2)
- AGIL (2)
- AIS (2)
- ATR (2)
- Absorption edge tomography (2)
- Adaptives Schweißen (2)
- Adsorbed Layer (2)
- Aktivkohle (2)
- Alkali-silica-reaction (2)
- Alterung von Pyrotechnik (2)
- Aluminium alloys (2)
- Aluminum (2)
- Antimicrobials (2)
- Atomic packing factor (2)
- Atomization (2)
- Austenitic stainless steel (2)
- BAMline (2)
- Bacteria (2)
- Bacterial adhesion (2)
- Barcoding (2)
- Bead (2)
- Bildanalyse (2)
- Bildgebung (2)
- Broadband dielectric spectroscopy (2)
- Building Materials (2)
- Building materials (2)
- CALPHAD (2)
- CCMat (2)
- CCS (2)
- CLP (2)
- Calcium cobaltite (2)
- Carbon capture (2)
- Carbon dioxide (2)
- Catalysts (2)
- Characterization (2)
- Chemical composition (2)
- Chemically Complex Materials (2)
- Composite (2)
- Composites (2)
- Computertomographie (2)
- Confocal (2)
- Core-shell (2)
- Corrosion Testing (2)
- Corrosion inhibition (2)
- Crack (2)
- Crack Propagation (2)
- Crack growth velocity (2)
- Crack healing (2)
- Crack intensity factor (2)
- Creep-resistant steel (2)
- Crystal orientation (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Damage (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Data fusion (2)
- Dental materials (2)
- Deuterium (2)
- Digitalization (2)
- Double cantilever beam (2)
- Durability (2)
- ECHA (2)
- EDX (2)
- ESEM (2)
- Eigenspannungen (2)
- Einstufung (2)
- Electrocatalysis (2)
- Electrochemistry (2)
- Electron beam induced modification (2)
- Elemental composition (2)
- Emission (2)
- Emission test chamber (2)
- Encoding (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Exchange interaction (2)
- Explosionsschutz (2)
- Explosivstoffe (2)
- FEM (2)
- FIB (2)
- Faseroptik (2)
- FeNi-Oxide NPs (2)
- Ferromagnetism (2)
- Finite element method (2)
- Fire (2)
- Friction and wear (2)
- GMR (2)
- GMR-Sensorik (2)
- Gas-Staub-Gemische (2)
- Gel-type electrolytes (2)
- Geothermal (2)
- Glas (2)
- Gold nanocluster (2)
- Gold nanoparticles (2)
- Green chemistry (2)
- Grüneisen parameter (2)
- Hazardous substances (2)
- Henry's constant (2)
- High Pressure (2)
- High temperature corrosion (2)
- High-temperature corrosion (2)
- Hot stamping (2)
- Hybride Gemische (2)
- Hydrogen permeability (2)
- Hydrogen storage (2)
- IUCLID (2)
- Image analysis (2)
- Image processing (2)
- Imaging techniques (2)
- In situ heating (2)
- In-situ (2)
- InP (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- Interatomic potentials (2)
- Ionic Liquid crystals (2)
- Iron (2)
- L-PBF (2)
- LLG (2)
- LMD (2)
- LTCC (2)
- Landau Lifshitz equation (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser metal deposition (2)
- Least-squares adjustment (2)
- Lichtbogensensorik (2)
- Lifetime (2)
- Load transfer (2)
- Low Cycle Fatigue (2)
- MMC (2)
- MOF (2)
- MSG-Engspaltschweißen (2)
- Machine Learning (2)
- Macrophages (2)
- Magnesium alloy (2)
- Magnetic moment (2)
- Magnetic nanoparticles (2)
- Metadata schema (2)
- Metal Matrix Composite (2)
- Metal matrix composite (2)
- Metal organic frameworks (2)
- Metals (2)
- Method (2)
- Micromagnetism (2)
- Microwave synthesis (2)
- Mikrobiell induzierte Korrosion (2)
- Modellierung (2)
- Molecularly imprinted polymers (2)
- Multielectrode array sensors (2)
- Multiplexing (2)
- NFDI (2)
- NIR (2)
- Nanomechanics (2)
- Nanosensor (2)
- Neutron (2)
- Neutron Diffraction (2)
- Non-classical crystallization (2)
- Normung (2)
- Numerical modeling (2)
- OOMMF (2)
- Oberflächenenergie (2)
- Object oriented micromagnetic framework (2)
- Online Process Monitoring (2)
- Ontologie (2)
- Ontology (2)
- Optics (2)
- Oxidglas (2)
- PBF-LB/M (2)
- Particle (2)
- Phonons (2)
- Photocatalysis (2)
- Plastic (2)
- Polycarbonate (2)
- Polymer 3R (2)
- Polymer bilayer coatings (2)
- Polypropylene (2)
- Porosity (2)
- Powder Bed Fusion (2)
- Precipitation (2)
- Process Monitoring (2)
- Protein (2)
- Proteins (2)
- Pyrotechnik (2)
- QHA (2)
- QY (2)
- Quantum yield (2)
- Quecksilberporosimetrie (2)
- REM (2)
- Radiotherapy (2)
- Referenzdaten (2)
- Reflectography (2)
- Reinheitsgradbestimmung (2)
- Resistance (2)
- Resonance frequency (2)
- Robotische Glasschmelzanlage (2)
- Roughness (2)
- SCNC (2)
- SEM/EDS (2)
- SIMS (2)
- SWIR (2)
- Scanning electrochemical microscope (SECM) (2)
- Selected Laser Melting (2)
- Semantic Web Technologies (2)
- Semiconductor (2)
- Sicherheitstechnische Kenngrößen (2)
- Silica (2)
- Single molecule (2)
- Single particle spectroscopy (2)
- Small-angle scattering (2)
- SnO2 (2)
- Stainless steels (2)
- Stickstoff (2)
- Stochastic Landau Lifshitz Gilbert equation (2)
- Structural Health Monitoring (2)
- Surface (2)
- Surface functionalization (2)
- Surface integrity (2)
- Synchrotron X-Ray Refraction (2)
- Synchrotron X-ray computed tomography (2)
- Syngle Crystal alloy (2)
- Temperature (2)
- Thermally induced porosity (2)
- Thermodynamik (2)
- Thermoelectric materials (2)
- Thermogravimetrie (2)
- Thin film metrology (2)
- Titanium (2)
- Tool wear (2)
- Topotactic transformation (2)
- Traceability (2)
- Transition metals (2)
- Tungsten carbide (WC) (2)
- Ultra-Thin films (2)
- Ultraschalltauchtechnik (2)
- Ultrashort laser processing (2)
- Ultrasonic-assisted milling (2)
- Ultrasound (2)
- VOC (2)
- Verbundfestigkeit (2)
- Vessels (2)
- Wasserstoff (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- Wood (2)
- X-ray computed tomography (2)
- XRF (2)
- Zeolitic imidazolate framework (2)
- ZfP (2)
- Zinc coatings (2)
- Zustandsüberwachung (2)
- beta particle (2)
- cylinders (2)
- 18HLT01 MetVes II (1)
- 29Si-27Al TRAPDOR MAS (1)
- 3D High-temperatue shape screening (1)
- 3D analysis (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D imaging (1)
- 3D printing (1)
- 3D tomography (1)
- 3D-Formerkennung (1)
- 5-hydroxynicotinic acid (1)
- 5G (1)
- AFM-IR (1)
- AISI 304L (1)
- ALD (atomic layer deposited) (1)
- ALD-Beschichtung (1)
- ALD-Hybridprozesse (1)
- AM IN718 (1)
- ASAXS (1)
- ASR (1)
- ATH (1)
- ATRP (1)
- Abkühlgeschwindigkeit (1)
- Absolute flourometry (1)
- Absorption edge (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acrylamide based polymers (1)
- Active pharmaceutical ingredient (API) (1)
- Additiv gefertigter Stahl (1)
- Additive Manufacture (1)
- Additive Fertigung (AM) (1)
- Additive surface treatment (1)
- Admixtures (1)
- Adsorbed layer (1)
- Advanced manufacturing (1)
- Advanced nanomaterials (1)
- Aerosole (1)
- Affinity chromatography (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag2S (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging (1)
- Aging mechanisms (1)
- Air Void System (1)
- Air exchange rate (1)
- Al alloy (1)
- Al-Cu-Li alloys (1)
- Al2O3 (1)
- Al2O3 thin films (1)
- Al2O3-Schichten (1)
- AlSi10Mg alloy (1)
- Albumin (1)
- Alcali activated binders (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkalialumosilicatsysteme (1)
- Alkaline earth metal (1)
- Aln (1)
- Altglasfragmente (1)
- Altpapierrecycling (1)
- Alumina (1)
- Aluminium Alloy (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Ammoniumnitrat (1)
- Amorphous silica particles (1)
- Amphiphilicity (1)
- Amplification (1)
- Anaerob (1)
- Analyser-based imaging (1)
- Analytical solution (1)
- Anisotropy (1)
- Annealing study (1)
- Anodic Aluminum Oxide (1)
- Anodization (1)
- Antibiotics (1)
- Antibodies (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Artefact (1)
- Artificial digestion (1)
- Asphaltene content (1)
- Assays (1)
- Atmospheric Corrosion (1)
- Atmospheric Plasma Spraying (1)
- Atomic Force Microscopy (1)
- Atomic Layer Deposition (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Ausbildung (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Automatisation (1)
- Automatisierung (1)
- BADGER film (1)
- BBR (1)
- BCS (1)
- BLE (1)
- BSA (1)
- BTS (1)
- Bacterial growth (1)
- BadgerFilm (1)
- Baudenkmal (1)
- Baustahl (1)
- Baustoffe (1)
- Bauzustandsanalyse (1)
- Benannte Stelle (1)
- Bench braking sequence (1)
- Beratung Behörden/Ministerien (1)
- Beschichtung (1)
- Beta particle (1)
- Beton (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Betonschallplatte (1)
- Betonschäden (1)
- Bewitterung (1)
- Bexarotene (1)
- Bildverarbeitung (1)
- Bio Ceramics (1)
- Bio-SAXS (1)
- Bio-receptive (1)
- BioSAXS (1)
- Bioactive glass (1)
- Biocide (1)
- Biocides (1)
- Biocomposite (1)
- Biocorrosion (1)
- Biofilm cultivation (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilms (1)
- Bioimaging (1)
- Biomasseverbrennung (1)
- Biomimetics (1)
- Bioreceptivity (1)
- Bioresorbable (1)
- Blast injury (1)
- Bluetooth Low Energy (1)
- Boehmite alumina (1)
- Bonding Analysis (1)
- Bovine serum albumin (1)
- Bragg-edge (1)
- Brazing (1)
- Bremsbeläge (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Bronze (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Build Angle (1)
- Building products (1)
- Bulk diffusion (1)
- Bulk material (1)
- Bulk properties ageing (1)
- Burst pressure (1)
- Burst test (1)
- C-C coupling (1)
- CALPHAD databases analysis (1)
- CCUS (1)
- CEO (1)
- CERN (1)
- CFD (1)
- CMAS (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CMSX4 (1)
- CO2-Korrosion (1)
- CONSENS (1)
- CUSP (1)
- Calcium sulfoaluminate cement (1)
- Calculation (1)
- Camera (1)
- Capsules (1)
- Carbide (1)
- Carbon (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon nanomembranes (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (1)
- CdSe (1)
- Cearmics (1)
- Cell imaging (1)
- Cement (1)
- Cement hydration (1)
- Ceramic (1)
- Ceramic spring (1)
- Ceramic-ceramc joints (1)
- Ceramics (1)
- Cermet (1)
- Certification (1)
- Certified reference material (1)
- Certified standards (1)
- Charakterisierung (1)
- Chemical Bonds (1)
- Chemical analyses (1)
- Chemical compositions (1)
- Chemically Complex Alloy (1)
- Cheminformatics (1)
- Chloride (1)
- Chromatography (HIC) (1)
- Chromium (1)
- Chromium (III) complexes (1)
- Chromium oxide (1)
- Chromstahl (1)
- Climate chamber simulation (1)
- Co-axial monitoring (1)
- CoCrMo (1)
- Coatings (1)
- Coda Wave Interferometry (1)
- Coherent Rayleigh OTDR (1)
- Cold Spray (1)
- Column chromatography (1)
- Columnar crystal growth (1)
- Columnar liquid crystals (1)
- Compatible solute (1)
- Complex concentrated alloy (CCA) (1)
- Component test (1)
- Composite cylinder (1)
- Composition (1)
- Compound (1)
- Compression (1)
- Compsite tapes (1)
- Configurational entropy (1)
- Confined Columnar Liquid Crystals (1)
- Confocal fluorescence microscopy (1)
- Conservation (1)
- Construction products (1)
- Consumer articles (1)
- Contact resonance (1)
- Conventional testing (1)
- Convolutional neural networks (1)
- Coordination polymer (1)
- Core-shell architecture (1)
- Core/shell materials (1)
- Corosion (1)
- Corrosion behaviour (1)
- Corrosion investigations (1)
- Corrosion loss (1)
- Corrosion product layer (1)
- Corrosion products (1)
- Corrosion protecting system (1)
- Cosolute (1)
- Crack evolution (1)
- Crack propagation (1)
- Crack propagation analysis (1)
- Cracks (1)
- Creep-resistant Steel (1)
- Crush (1)
- Cryo-TEM (1)
- Crystal Engineering (1)
- Crystal plasticity (1)
- Crystal structure (1)
- Crystalline structure (1)
- Curing Monitoring (1)
- Curvelet Transform (1)
- Cutting material (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-L (1)
- DIC assisted compression (1)
- DIN 52186 (1)
- DIN EN 252 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DRIFTS (1)
- DSR (1)
- Damage Analysis (1)
- Damage mechanism (1)
- Damage repair (1)
- Dangerous goods packaging (1)
- Dangerous goods packagings (1)
- Dark-field transmission electron microscopy (1)
- Data (1)
- Data Fusion (1)
- Data Interoperability (1)
- Data Science (1)
- Data analysis (1)
- Databases (1)
- Datenanalyse (1)
- Datenträger (1)
- Deep Learning (1)
- Defect detection (1)
- Defects (1)
- Deformation (1)
- Deformationen (1)
- Degradation of Mechanical Properties (1)
- Degree of damage (1)
- Degree of purity (1)
- Delamination (1)
- Dendrimersomes (1)
- Dendritic amphiphiles (1)
- Density (1)
- Density Functional Theory (1)
- Dental material (1)
- Depth-profiling (1)
- Design Fire (1)
- Destabilization (1)
- Detection (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusion (1)
- Diffusion Coefficient (1)
- Diffusion barrier (1)
- Digital material representation (1)
- Digital twin (1)
- Digitaler Zwilling (1)
- Diopside (1)
- Direct fluorine-metal bond (1)
- Direct laser writing (1)
- Discotic Liquid Crystal (1)
- Discotic liquid crystals (1)
- Dislocations (1)
- Distortion (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed vibration sensing (1)
- Distribution during filling (1)
- Disäuren (1)
- Doping study (1)
- Downstream processing (1)
- Dredging mud (1)
- Drop test (1)
- Druckwelle (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dust analysis (1)
- Dynamic light scattering (1)
- Dynamics (1)
- EBSD analysis (1)
- EC4SafeNano (1)
- EDS (1)
- EDX Analysis (1)
- EDXRD (1)
- EMN (1)
- EMPIR project (1)
- EPMA (1)
- ESI-TOF-MS (1)
- EU H2020 project (1)
- Ectoin (1)
- Ectoine (1)
- Eddy Current (1)
- Edelstahl (1)
- Eigenspannung (1)
- Eindringmodul (1)
- Einkristalllegierung (1)
- Einzelfaserdurchzugsversuch (1)
- Eisen (1)
- Elastomer (1)
- Elastomers (1)
- Electro catalyst (1)
- Electrochemical noise (1)
- Electrodeposited Ni - coatings (1)
- Electrolysis (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron beam (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (EPMA) (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Ellipsometric metrology (1)
- Emission chamber testing (1)
- Energetic materials (1)
- Energietechnik (1)
- Energy (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Engineered Nanomaterials (1)
- Environment (1)
- Epox (1)
- Epoxy nanocomposite (1)
- Er(III) (1)
- Erneuerbare Energien (1)
- Erosion (1)
- European Metrology Network (1)
- European standard (1)
- Exciton diffusion (1)
- Experimental study (1)
- Extracellular polymeric substances (1)
- Extracellular vesicles (EV) (1)
- Extrusion (1)
- FE (1)
- FIB/SEM (1)
- FNCT (1)
- FTIR spectroscopy (1)
- Fachwerkträger (1)
- Fallhammer (1)
- Far-infrared spectroscopy (1)
- Farbätzen (1)
- Fasermodifikation (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Façade (1)
- Fe-Cr alloys (1)
- Fe-Ni (1)
- Fe2TiO5 (1)
- FeCr- alloys (1)
- FeNi (1)
- FeNi thin film (1)
- FeSnOx (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferroelektret (1)
- Fiber (1)
- Fiber reinforced dental post (1)
- Fiber sensors (1)
- Fiber-optic microarray (1)
- Fiberglass composite (1)
- Film depositition (1)
- Film thickness determination (1)
- Finite Element Method (1)
- Finite Element Modelling (1)
- Fire Retardant (1)
- Flow Cell (1)
- Flow-System (1)
- Fluorescence quenching (1)
- Fluorescence spectroscopy (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Fluoride (1)
- Fluorides (1)
- Fluorine Interaction (1)
- Flüssigmetallversprödung (1)
- Foam tiles (1)
- Focussed ion beam growth (1)
- Force distance curves (1)
- Formaldehyde (1)
- Foundation (1)
- Fractional factorial (1)
- Fractography (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Fraktografie (1)
- Fraktographie (1)
- Fre (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fullerene (1)
- Functional group detection (1)
- Functionality type distribution (1)
- Funktionelle Beschichtungen (1)
- Funtional Groups (1)
- Füllgradregelung (1)
- G5P (1)
- GD-OES (1)
- GEXRF (1)
- GUM-compliance (1)
- GVP (1)
- Gamma-Co60 radiation (1)
- Gamma-irradiation (1)
- Gas Sorption (1)
- Gas solubility (1)
- Gas turbine (1)
- Gefüge (1)
- Gel electrolytes (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Generator (1)
- Geopolymer (1)
- Geopolymers (1)
- Geothermal energy (1)
- Geothermie (1)
- Ggraphene polymer nanocomposite (1)
- GlasDigital (1)
- Glasanalyse (1)
- Glasig-kristalline Sinterwerkstoffe (1)
- Glaskeramik (1)
- Glass paints (1)
- Glass transformation temperature (1)
- Glass transition (1)
- Glass-ceramic (1)
- Glasstruktur (1)
- Gleeble (1)
- Gleitlinien (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycerin (1)
- Gold (1)
- Gold Nanoparticle (1)
- Gold mosaics (1)
- Grain boundary corrosion (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Grazing exit (1)
- Grenzflächenaktive Verbindung (1)
- Grey cast iron machining (1)
- Growth Kinetics (1)
- Guideline (1)
- HDPE Sorption (1)
- HF (1)
- HR-CS-AAS (1)
- HV cable accessories (1)
- HV-Insulation (1)
- Haftfestigkeit (1)
- Haftvermittler (1)
- Halbleiterphysik (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Harsh environments (1)
- Hatch length (1)
- Hauptkomponentenanalyse (1)
- Hazmat (1)
- Heat Treatment (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heißzug (1)
- Helium- und Wasserstoffpermeation (1)
- Heterogene plastische Deformation (1)
- Hexafluorobenzen (1)
- HfO2 (1)
- High Cycle Fatigue (1)
- High Molecular Polyethylene (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High resolution ultrasonic testing (1)
- High temperature (1)
- High temperature corrosion resistance (1)
- High voltage cable accessories (1)
- High-Performance Concrete (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-strength steels (1)
- High-temperature stability (1)
- Historic buildings (1)
- Hochfester Feinkornbaustahl (1)
- Hochtemperaturanwendungen (1)
- Hollow specimen (1)
- Holz (1)
- Holzbaustoff (1)
- Holzprüfung (1)
- Homemade explosives (1)
- Honeycomb structure (1)
- Horizontaldilatometer (1)
- Human plasma (1)
- Humidity (1)
- Hybrid inorganic/organic copolymers (1)
- Hydration (1)
- Hydrogen diffusion (1)
- Hydrogen permeation (1)
- Hydrophobic interaction (1)
- Hydrothermal treatment (1)
- Hydroxyectoine (1)
- Härtevergleichsplatten (1)
- Härteverlauf Schweißnaht (1)
- IN 625 (1)
- IN 718 (1)
- IN718 (1)
- IR (1)
- IR spectroscopy (1)
- ISO 5725 (1)
- Illumina (1)
- ImAFM (1)
- Image Denoising (1)
- Image segmentation (1)
- Immersion tank testing (1)
- Impact excitation (1)
- Impact strength (1)
- Implant-Test (1)
- In situ Raman (1)
- In situ XRD (1)
- In situ analysis (1)
- In situ diffraction (1)
- In situ measurement (1)
- In situ measurement, (1)
- In situ tensile test (1)
- In situ testing (1)
- In-Situ (1)
- In-Situ Characterization (1)
- In-situ Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ loading (1)
- In-situ monitoring (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 718 (1)
- Indoor air (1)
- Industrieabwasseraufbereitung (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Initial hydration (1)
- Innovative Messtechnik (1)
- Inorganic polymers (1)
- Instrumented indentation testing (1)
- Instrumentierte Eindringprüfung (1)
- Integrated analysis (1)
- Interface (1)
- Interim storage (1)
- Interlaboratory comparison (1)
- Intermediate (1)
- Internal friction (1)
- Internal oxidation (1)
- Interpenetrating polymer network (1)
- Interphase (1)
- Invasive Arten (1)
- Inverse Analysis (1)
- Inverse analysis (1)
- Inverse problem (1)
- Ionic liquids (1)
- Ionizing radiation damage (1)
- Iridium oxide films (1)
- Iridium-titanium mixed oxides (1)
- Iron aluminides (1)
- Iron oxide (1)
- Isotope analysis (1)
- JNP AdvManuNet (1)
- Kalottenverfahren (1)
- Kaltrissprüfung (1)
- Kavitation (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Keramik (1)
- Kiefernholz (1)
- Kieselsäure (1)
- Klebfestigkeit (1)
- Kleidermotte (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Knowledge Readiness Level (1)
- Knowledge Representation (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konformitötsbewertung (1)
- Kontrastierung (1)
- Korrosionsabtrag (1)
- Kraftabhängige Funktion (1)
- Kristallplastizität (1)
- Künstliche neuronale Netze (1)
- L-PBF 316L (1)
- LBM (1)
- LIBS TIG welding (1)
- LIPSS (1)
- LPBF (1)
- LPSO (1)
- LTCC multilayer (1)
- Laboratory Container (1)
- Laboratory method (1)
- Laborvergleich Härte (1)
- Lanthanide(III) (1)
- Large scale test (1)
- Large-scale production (1)
- Large-scale synthesis (1)
- Large-scale test (1)
- Laser Cladding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser cludding (1)
- Laser dispersing (1)
- Laser structuring (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strcutures, LIPSS (1)
- Laserthermografie (1)
- Lasertriangulationssensor (1)
- Latex (1)
- Lattice structure (1)
- Layer-by-layer deposition (1)
- Leaching process (1)
- Least-Squares Adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lichtmikroskopie (1)
- Ligand (1)
- Ligands (1)
- Lightweight structures (1)
- Lignin (1)
- Lignosulfonate (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Lithium Ion Batteries (1)
- Lithium batteries (1)
- Lithium-ion batteries (1)
- Lizard (1)
- Load Partition (1)
- Load history (1)
- Loading factor (1)
- Localized corrosion (1)
- Lokale Korrosion (1)
- Long-term monitoring (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- Luftultraschall (1)
- Luminescence lifetime measurments (1)
- Luminescent materials (1)
- MIC projekt (1)
- MID IR Spectroscopy (1)
- ML (1)
- Machine-Learning Segmentation (1)
- Magic-sized cluster (1)
- Magnesium (1)
- Magnetic nano-particles (1)
- Magnetic stray fields (1)
- Magnetostrictive actuator layer (1)
- Magnetostrictive layer (1)
- Magnetron sputtering (1)
- Manganese oxide (1)
- Maritime atmosphere (1)
- Martensitische nichtrostende Stähle (1)
- Maschinennachgiebigkeit (1)
- Material characterization (1)
- Material degradation (1)
- Material design (1)
- Material model (1)
- Material oxidation (1)
- Material selection (1)
- McSAS3 (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical Behavior (1)
- Mechanical strength (1)
- Mechanichal behaviour (1)
- Mechanische Kennwertermittlung (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemie (1)
- Median lethal energy deposit (1)
- Medieval glasses (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Melt Flow Rate (MFR) (1)
- Melt pool behaviour (1)
- Melting (1)
- Mesoporous (1)
- Mesoporous materials (1)
- Mesoporous thin films (1)
- Messunsicherheit (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metal reducing bacteria (1)
- Metal seal (1)
- Metallsulfide (1)
- Metallurgie (1)
- Methodenvalidierung (1)
- Micro computed tomography (1)
- Micro-XRF (1)
- Micro-heterogeneity (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological investigation (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microfluidic (1)
- Micromanipulation (1)
- Micromixer (1)
- Microparticles (1)
- Micropatterned dry adhesive (1)
- Microplastics sampling (1)
- Microprinting (1)
- Microstructure Analysis (1)
- Microstructure analysis (1)
- Microstructure-property relations (1)
- Mikro-CT (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mikrostruktur (1)
- Mineralogie (1)
- Missbräuchliche Verwendung in Stadien (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model alloy (1)
- Model and measurement based analysis (1)
- Modeling (1)
- Moisture (1)
- Moisture drying (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular dynamic simulation (1)
- Monte-Carlo simulations (1)
- Morpho-chemical characterization (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multielectrode (1)
- Multiphoton Lithography (1)
- Multiple ageing and rejuvenation (1)
- Multiplexing sensory fiber-optic microarrays (1)
- NDT Monitoring (1)
- NFDI-MatWerk (1)
- Nano-landscape (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nanofiller (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticel based pH-probes (1)
- Nanophysik (1)
- Nanoporous media (1)
- Nanorisk (1)
- Nanosafety (1)
- Nanosensors (1)
- Nanostructures (1)
- Natural rubber (1)
- Nd-sensitizer (1)
- Nd3+ (1)
- Neintron diffraction (1)
- Neozoon (1)
- Netron diffraction (1)
- Network Communication (1)
- Neutronbeugungsverfahren (1)
- Neutronen (1)
- Neutronendiffraktion (1)
- Neutronenradiographie (1)
- Ni-base superalloy (1)
- Ni-based alloy (1)
- Nickel based alloy (1)
- Nickelbasislegierungen (1)
- Niobium carbide (1)
- Niobium carbide powder (1)
- Nitrogen (1)
- Non destructive testing (1)
- Non-Destructive Testing (1)
- Non-classical crystallization theory (1)
- Non-destructive testing (1)
- Normalbeton (1)
- Novel equipment (1)
- Nuclear Magnetic Resonance (1)
- Numerical Modeling (1)
- Numerical modelling (1)
- Numerische Simulation (1)
- OH Radical (1)
- OH radical scavenger (1)
- OH radicals (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenkeimbildung (1)
- Offshore (1)
- One-part formulation (1)
- Online NMR Spectroscopy (1)
- Open data (1)
- Open science (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Optical connector (1)
- Optical criterion (1)
- Optical layer model (1)
- Optical properties (1)
- Optoelektronik (1)
- Orientation-dependent microstructure (1)
- Orientierung (1)
- Osmolyte (1)
- Overlay (1)
- Oxide Glasses (1)
- Oxygen reduction reaction (1)
- P25 (1)
- P92 (1)
- PAEK (1)
- PDMS (1)
- PEG (1)
- PH (1)
- PIM-1 (1)
- PMD Core Ontology (1)
- PMDco (1)
- POD (1)
- POSS (1)
- PU Learning (1)
- PVD /ECD process (1)
- Pair Distribution Functions (1)
- Pair distribution function analysis (1)
- Paracetamol (1)
- Partial discharge detection (1)
- Partial penetration (1)
- Particle Synthesis (1)
- Particle measurement (1)
- Particle scattering (1)
- Particle scattering simulations (1)
- Particle size (1)
- Particle size distribution (1)
- Particle size distributuion (1)
- Particle synthesis (1)
- Paste (1)
- Peem (1)
- Permeability (1)
- Permeation (1)
- Perovskite (1)
- Pharmaceuticals (1)
- Phase composition (1)
- Phasenzusammensetzung (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorus (1)
- Photocuring (1)
- Photoluminescence (1)
- Photoresist (1)
- Photovoltaic (1)
- Phthalocyanine (1)
- Piezopolarisation (1)
- Pipeline (1)
- Plattform MaterialDigital (1)
- Politikberatung (1)
- Pollen (1)
- Polyacrylamide (1)
- Polyamid 12 (1)
- Polyaniline (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polyethylene, PE-HD (1)
- Polyglycerol (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer coating (1)
- Polymer nanocomposites (1)
- Polymer optical fibers (1)
- Polymer optical fibre (1)
- Polymer-Ceramic-Composite (1)
- Polymeric membrane (1)
- Polymers of intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pores (1)
- Porosity growth (1)
- Porosität (1)
- Porous Materials (1)
- Porous materials (1)
- Portland cement (1)
- Position detection (1)
- Poster presentation (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Powder method (1)
- Preferred orientation (1)
- Pressure loading (1)
- Pressure tanks (1)
- Pressure wave (1)
- Primäre Explosionswirkug (1)
- Probenpräparation (1)
- Process Control (1)
- Processing (1)
- Propagation modes (1)
- Property simulation (1)
- Protective glazing (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein unfolding (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Proximatanalyse (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Präparation (1)
- Prüfmethoden (1)
- Prüfrichtlinie (1)
- Pulse reflection (1)
- Pulse shape analysis (1)
- Pulvermethode (1)
- QD (1)
- QSPR (1)
- Quality control (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantum Chemistry (1)
- Quantum Dot-Rod (1)
- Quantum Yield (1)
- Quartz Crystal Microbalance QCM (1)
- Quasi-distributed sensing (1)
- Quenching and partitioning (1)
- Qulitätssicherung (1)
- RAFT (1)
- ROS (1)
- Radar (1)
- Radical Scavenger (1)
- Radical scavenger (1)
- Radicals (1)
- Radiografie (1)
- Radiological inspections (1)
- Raman spectroscopy (1)
- Rare earth nanoparticles (1)
- Ratiometric Sensors (1)
- Ratiometric sensors (1)
- Rauheit (1)
- Rayleigh scattering (1)
- Recycling (1)
- Reduction 4-nitrophenol (1)
- Reduction of agglomerates (1)
- Reductive amination (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference materials (1)
- Reference nanomaterials (1)
- Reference particles (1)
- Reference procedures (1)
- Reference product (1)
- Reference samples (1)
- Registrierungsdossiers (1)
- Reinforcing Bar (1)
- Reliable characterization (1)
- Repair (1)
- Reproducibility (1)
- Research Data Management (1)
- Research data management (1)
- Residual stress measurements (1)
- Residual stress state (1)
- Residual stresses (1)
- Resonance (1)
- Resonanz (1)
- Reverse-time migration (1)
- Rice husk ash (1)
- Rigid amorphous fraction (1)
- Ringversuche (1)
- Risse (1)
- Rissprüfung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Round robin (1)
- Round robin test (1)
- Rubber (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- S-phase (1)
- SALSA (1)
- SDS-PAGE (1)
- SEM analysis (1)
- SEP 1927 (1)
- SIEF (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Safe-by-Design (1)
- Safer by design (1)
- Salt melt (1)
- Sandblasting (1)
- Sandsteine (1)
- Sandstone (1)
- Sandstorm (1)
- Sanger sequencing (1)
- Sapphire (1)
- Sc-ICP-ToF-MS (1)
- Scaffold (1)
- Scale-bridging (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Schichtdicken (1)
- Schichtherstellung (1)
- Schichttestung (1)
- Schutzverglasung (1)
- Schwefelgehalt (1)
- Schweißdatenmanagement (1)
- Schweißnähte (1)
- Schwindungsinhomogenitäten (1)
- Schwindungsverhalten (1)
- Scientific software (1)
- Sea Water (1)
- Seenotrettungsmittel (1)
- Selbstreinigung (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser curing (1)
- Self-assembly (1)
- Self-healing silicone rubber (1)
- Self-powdering (1)
- Self-reactive substances (1)
- Semantic Interoperability (1)
- Semi-metallic friction material (1)
- Sende-Empfangs Prüfkopf (1)
- Sequential learning (1)
- Service life (1)
- Service life model (1)
- Shape (1)
- Shell (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si wafer filter (1)
- Si-Ge (1)
- SiGe (1)
- SiO2 (1)
- Silica Nanoparticles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicone rubber (1)
- Silver (1)
- Silver nanoparticle (1)
- Simvastatin (1)
- Single cell analysis (1)
- Single crystal X-ray diffraction (1)
- Single cystal (1)
- Single-stranded DNA-binding proteins (1)
- Size and size distribution (1)
- Size effect (1)
- Size-exclusion chromatography (SEC) (1)
- Sliding performances (1)
- Slow Strain Rate Testing (1)
- Slow crack growth (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle x-ray scattering (1)
- Small-angle xray scattering (1)
- Smart materials (1)
- Smouldering (1)
- Sodiumborosilicate glasses (1)
- Software (1)
- Soil (1)
- Soil-structure interaction (1)
- Solar Cell (1)
- Solarenergie (1)
- Solid-State-Reaction (1)
- Solution doping (1)
- Sorption (1)
- Spectral multiplexing (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopy (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Spinel (1)
- Spontane Polarisation (1)
- Spray drying (1)
- Sprengplattieren (1)
- Spring constant (1)
- Spruce (1)
- Stabilization of HT-structures at room temperature (1)
- Stabilizer (1)
- Stable suspensions (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless Steel (1)
- Stainless Steels (1)
- Standard (1)
- Standardisation (1)
- Standardization (1)
- Standardization of Ellipsometry (1)
- Starch (1)
- Starch nanoparticle (1)
- Strain sensors (1)
- Stress cracking resistance (1)
- Strontiumfluoride (1)
- Structural color (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Subgrain structure (1)
- Submerged arc welding (1)
- Substrate effect (1)
- Sulfiding (1)
- Sulfur (1)
- Superalloy (1)
- Superconducting (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Superplasticizer (1)
- Superplasticizers (1)
- Surface Chemical Transformation (1)
- Surface Energy (1)
- Surface Plasmon Resonance (1)
- Surface analysis (1)
- Surface characterization (1)
- Surface crystallization (1)
- Surface energy (1)
- Surface functionalities (1)
- Surface group analysis (1)
- Surface modification (1)
- Surface morphology (1)
- Surface structuring (1)
- Surface texturing (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron XRD (1)
- Synchrotron radiation (1)
- Synchrotron refraction radiography (1)
- Synthesizability (1)
- Synthetic air (1)
- TATP (1)
- TBC (1)
- TED-GC-MS (1)
- TED-GC/MS (1)
- TEKKEN-Test (1)
- TEM Image (1)
- TGA-FTIR (1)
- THz and mid IR spectroscopy (1)
- THz spectroscopy (1)
- TIG-welding (1)
- TKD (1)
- TMDSC (1)
- TMF (1)
- TRIP (1)
- TRIS (1)
- Talbot-Lau interferomerty (1)
- Talbot-Lau interferometry (1)
- Tankdesign (1)
- Tauchwägung (1)
- Technical Lignin (1)
- Temeprature scaling (1)
- Temperature dependence (1)
- Temperature scaling (1)
- Tensile (1)
- Tensile Properties (1)
- Tensile test (1)
- Terahertz Tomography synthetic aperture (1)
- Terahertz synthetic aperture dielectric materials (1)
- Termites (1)
- Ternary quantum dot (1)
- Test method (1)
- Test methods validation (1)
- Test procedure (1)
- Testing (1)
- Textile fibres (1)
- Texture (1)
- Themal Transitions (1)
- Thermal Spray (1)
- Thermal arrier coatings (1)
- Thermal barrier coatings (1)
- Thermal cycling (1)
- Thermal decomposition (1)
- Thermal treatment (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermografie (1)
- Thermomagnetic material (1)
- Thermomechanics (1)
- Thermoplastic Polyurethane (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thickness (1)
- Thin Films; (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiO2 nanoparticle (1)
- Time-offlight Diffraction (TOFD) (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium nitride (1)
- Titanium-di-boride (1)
- Titration (1)
- Tomographie (1)
- Tomography (1)
- Tool steel (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topografie (1)
- Topography (1)
- Topometry (1)
- Torsional fatigue (1)
- Total scattering analysis (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transport mechanism (1)
- Tribological behavior (1)
- Tribologie (1)
- Trinkwasser (1)
- Tunnel (1)
- Two photon polymerisation (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Type III composite pressure receptacles (1)
- Tyrosine (1)
- UCNP (1)
- UCST polymers (1)
- UCST-type polymer (1)
- UPLC (1)
- UV Weathering (1)
- UV-irradiation (1)
- Ultra sound (1)
- Ultrafast laser processing (1)
- Ultraschall (1)
- Ultrasonic (1)
- Ultrasonic Testing (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Ultrasonic echo technique (1)
- Uncertainty (1)
- Uncertainty budgets (1)
- UpConversion (1)
- Upconversion nanoparticles (1)
- Upconverting nanoparticles (1)
- VM12 SHC (1)
- Vacuum (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validation (1)
- Verbundwerkstoffe (1)
- Vereinfachtes Verfahren (1)
- Vergleichsstahlproben (1)
- Vernetzte Produktion (1)
- Verzinkungen (1)
- Videoskopie (1)
- Virtual experiments (1)
- Vitual computer tomography simulation (1)
- Volatile organic compounds (1)
- WIG-Blindschweißnaht (1)
- Waiting time (1)
- Wasseraufbereitung (1)
- Wasserstoffpermeation (1)
- Waste heat recovery (1)
- Water/alcohol mixtures (1)
- Wave propagation (1)
- Weld Joint (1)
- Wellenprüfung (1)
- White light interference microscopy(WLIM) (1)
- Widerstandpunktschweißen (1)
- Windkanal (1)
- Wood preservation (1)
- Workflow (1)
- X-Ray Diffraction (1)
- X-ray Computed Tomography (1)
- X-ray Diffraction (1)
- X-ray computer tomography (1)
- X-ray diffractometry (1)
- X-ray imaging (1)
- X-ray interferometry (1)
- X-ray scattering (1)
- X-ry Diffraction (1)
- XAS (1)
- Yb(III) (1)
- Yellowing (1)
- Young's modulus (1)
- Young´s modulus (1)
- Zahnmedizin (1)
- Zelluläres Polypropylen (1)
- Zement (1)
- Zementgebundene Baustoffe (1)
- Zentrifugentechnologie (1)
- Zeolite (1)
- Zersetzungsgasanalyse (1)
- Zerstörungsfreie Prüfung (1)
- Zinc and galvanized samples (1)
- Zirconium (1)
- ZnSe (1)
- Zonation (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zünder (1)
- additive manufacturing (1)
- aggregation-induced dual emission (AIDE) (1)
- bioimaging (1)
- burst test (1)
- cocrystal (1)
- creep behaviour (1)
- dangerous goods packagings (1)
- excess isotherms (1)
- excitation power density (1)
- extreme temperature (1)
- gas adsorption (1)
- gas solubility (1)
- high-resolution camera (1)
- hybrid repair (1)
- ionic liquids (1)
- life cycle test (1)
- low energy electrons (1)
- mechanochemistry (1)
- milling (1)
- pH probe (1)
- pH sensing (1)
- polyethylene terephthalate (1)
- porous solids (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- ssDNA (1)
- stress cracking resistance (1)
- test methods (1)
- µ-XRF (1)
- µCT (1)
- Örtliche Korrosion (1)
- β-cristobalite structure type (1)
Organisationseinheit der BAM
- 6 Materialchemie (196)
- 5 Werkstofftechnik (94)
- 8 Zerstörungsfreie Prüfung (90)
- 6.3 Strukturanalytik (65)
- 8.5 Röntgenbildgebung (60)
- 9 Komponentensicherheit (52)
- 6.6 Physik und chemische Analytik der Polymere (51)
- 1 Analytische Chemie; Referenzmaterialien (43)
- 6.1 Oberflächen- und Dünnschichtanalyse (39)
- 4 Material und Umwelt (36)
- 7 Bauwerkssicherheit (34)
- 5.1 Mikrostruktur Design und Degradation (28)
- 6.0 Abteilungsleitung und andere (26)
- 1.2 Biophotonik (25)
- 5.4 Multimateriale Fertigungsprozesse (21)
- 8.0 Abteilungsleitung und andere (21)
- 9.4 Integrität von Schweißverbindungen (20)
- 4.1 Biologische Materialschädigung und Referenzorganismen (19)
- 5.6 Glas (19)
- 6.2 Material- und Oberflächentechnologien (19)
- 9.3 Schweißtechnische Fertigungsverfahren (19)
- 5.2 Metallische Hochtemperaturwerkstoffe (17)
- 2 Prozess- und Anlagensicherheit (14)
- 7.1 Baustoffe (13)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (12)
- 6.7 Materialsynthese und Design (12)
- 3 Gefahrgutumschließungen; Energiespeicher (11)
- 4.2 Material-Mikrobiom Wechselwirkungen (11)
- 7.6 Korrosion und Korrosionsschutz (11)
- 5.3 Polymere Verbundwerkstoffe (8)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (8)
- 8.4 Akustische und elektromagnetische Verfahren (7)
- 9.6 Additive Fertigung metallischer Komponenten (7)
- 1.4 Prozessanalytik (6)
- 1.9 Chemische und optische Sensorik (6)
- 9.0 Abteilungsleitung und andere (6)
- 2.5 Konformitätsbewertung Explosivstoffe/Pyrotechnik (5)
- 3.1 Sicherheit von Gefahrgutverpackungen und Batterien (5)
- 4.5 Kunst- und Kulturgutanalyse (5)
- 9.5 Tribologie und Verschleißschutz (5)
- 2.0 Abteilungsleitung und andere (4)
- 5.5 Materialmodellierung (4)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (4)
- 9.2 Versuchsanlagen und Prüftechnik (4)
- 1.6 Anorganische Referenzmaterialien (3)
- 2.1 Sicherheit von Energieträgern (3)
- 4.0 Abteilungsleitung und andere (3)
- 7.2 Ingenieurbau (3)
- 8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen (3)
- 8.6 Faseroptische Sensorik (3)
- VP Vizepräsident (3)
- VP.1 eScience (3)
- 1.1 Anorganische Spurenanalytik (2)
- 1.5 Proteinanalytik (2)
- 2.2 Prozesssimulation (2)
- 3.2 Gefahrguttanks und Unfallmechanik (2)
- 3.4 Sicherheit von Lagerbehältern (2)
- 1.8 Umweltanalytik (1)
- 3.0 Abteilungsleitung und andere (1)
- 3.3 Sicherheit von Transportbehältern (1)
- 3.6 Elektrochemische Energiematerialien (1)
- 5.0 Abteilungsleitung und andere (1)
- 6.4 Materialinformatik (1)
- 7.4 Baustofftechnologie (1)
- MP Mitglied des Präsidiums (1)
- MP.0 Mitglied des Präsidiums und andere (1)
- P Präsident (1)
- PST Präsidiale Stabsstelle (1)
One-part-geopolymers, produced by addition of water to a mixture of solid silica and sodium alumi-nate, are a less exhaustively studied approach to form geopolymeric binders. Depending on the silica source, the reaction products show significant amounts of zeolite Na-A besides amorphous compounds. Previously, 29Si MAS NMR has been used to analyze the chemical structure of such one-part geopolymers, having crystalline structures and amorphous phases (Q2, Q3, Q4).
In this work, pure zeolites and three different one-part-geopolymers cured for 1 day were investigated by 29Si-27Al TRAPDOR NMR. It was used to identify aluminum phases in overlapping silicon sites. Zeolites Na-X (Si/Al=1.4) and Na-Y (Si/Al=2.7) served as model systems to measure the TRAPDOR effect of the structural units Q4(mAl). Both materials show several Q4(mAl) signals, which are all separated by their chemical shifts. The more aluminum surrounds the silicon tetrahedron the higher are the normalized TRAPDOR difference signals (S0/∆S). The intensity ratios between Q4(mAl) to Q4({m-1}Al) of these signals is fixed but vary slightly between both zeolites. These results are transferred to the complex geopolymer structure.
Most crucial for components of complex shape or heterogeneous micro structure, precise control of sintering has decisive influence on dimensional accuracy, mechanical integrity and reliability of sintered components. In these cases, only in situ 3D high-temperature shape screening during shrinkage would allow revealing temporary sinter warpage and hereby caused potential defects. Against this background, nokra Optische Prüftechnik und Automation GmbH, HTM Reetz GmbH and BAM developed a testing device for in situ 3D shape screening for ceramic and glass-ceramic tapes up to 1000°C by means of high-temperature laser profilometry. The local repeatability of the sample-sensor distance (sample height profile) is 10 µm at 1000°C. Current work is focused on dropping these restrictions in sample shape and temperature. In a second testing device, currently being in development, samples up to 5 cm x 5 cm x 5 cm can be measured at temperatures up to 1500°C.The presentation illustrates the current state of this work and possible applications of the method.
To better understand the mechanism of hydrogen assisted cracking (HAC), it is important to investigate the 3D structure of the cracks non-destructively. Since, cracks introduced by HAC are usually very small, conventional x-ray imaging methods often lack the required spatial resolution.
However, the detection of those cracks can be enhanced by taking advantage of refraction at interfaces within the sample.
To image this refractive deflection we employ analyser based imaging (ABI). In this work we aim at proving the enhanced crack detection of ABI by investigating an alluminum alloy weld.
Application of 4Q-BSE detector and dedicated software enables 3D surface measurements of fracture samples in SEM. 3D surface measurement is independent from magnification and material invariant. Quantitative height measurements require careful detector adjustment and system calibration. Live 3D view allows a fast assessment of topographical features. In addition to SE and BSE imaging, 3D surface data help to analyse and interpret fracture samples.
In this poster we will present some results of a research projects dealing with Arabic recipes of black inks [1-2]. To improve conservation practices of Arabic manuscripts we have assessed the feasibility of the recipes collected from many Arabic sources on bookmaking and reproduced the most common inks. Ink samples were then artificially aged and analysed using an array of analytical techniques, mostly non-invasive, in order to build a database of Arabic inks and their ingredients and also to verify the detection limits of the portable equipment employed.
We will show procedures and problems concerning the identification of ink types and ingredients using reflectography (in Vis, IR and UV), X-Ray Fluorescence, Infrared and Raman spectroscopy. The focus will be in particular on squid ink [3] and mixed inks – both in the form of carbon inks with the addition of tannins and of a mixture of carbon and iron gall inks – which are particularly difficult to detect [4]. We will also examine the results of iron gall inks made with iron filings or nails instead of vitriol, the various precursor used to extract gallic acid that are mentioned in the sources as surrogates of gall nuts.
[1] A. Schopen, Tinten und Tuschen des arabisch-islamischen Mittelalters, Göttingen: Vandenhoeck & Ruprecht, 2004
[2] S. Fani, Le arti del libro secondo le fonti arabe originali. I ricettari arabi per la fabbricazione degli inchiostri (sec. IX-XIII): loro importanza per una corretta valutazione e conservazione del patrimonio manoscritto, PhD thesis, Napoli: Università L’Orientale, 2013
[3] S. Centeno, J. Shamir Journal of Molecular Structure, 873 (2008), 149-159
[4] C. Colini et. al, Manuscript cultures, 11 (2018) 43-50
In this poster we will present some results of a research projects dealing with Arabic recipes of black inks. To improve conservation practices of Arabic manuscripts we have assessed the feasibility of the recipes collected from many Arabic sources on bookmaking and reproduced the most common inks. Ink samples were then artificially aged and analysed using an array of analytical techniques, mostly non-invasive, in order to build a database of Arabic inks and their ingredients and also to verify the detection limits of the portable equipment employed.
First, we will provide an overview of the sources [1-2] employed in the study – dating from 9th to 14th century, although the manuscripts in which they can be found dates up to the 20th century – with an eye on the ink typologies (real and perceived by the compilers). Then we will show how, by reproducing the recipes, it was possible to shed light on some oddities in the procedures and the choice of ingredients. In the end we will discuss problems concerning the identification of ink types and ingredients using reflectography (in Vis, IR and UV), X-Ray Fluorescence, Infrared and Raman spectroscopy. The focus will be in particular on mixed inks – both in the form of carbon inks with the addition of tannins and of a mixture of carbon and iron gall inks – which are particularly difficult to detect [3]. We will also examine the results of iron gall inks made with iron filings or nails instead of vitriol and the various precursor used to extract gallic acid that are mentioned in the sources as surrogates of gall nuts.
[1] A. Schopen, Tinten und Tuschen des arabisch-islamischen Mittelalters, Göttingen: Vandenhoeck & Ruprecht, 2004
[2] S. Fani, Le arti del libro secondo le fonti arabe originali. I ricettari arabi per la fabbricazione degli inchiostri (sec. IX-XIII): loro importanza per una corretta valutazione e conservazione del patrimonio manoscritto, PhD thesis, Napoli: Università L’Orientale, 2013
[3] C. Colini et. al, Manuscript cultures, 11 (2018) 43-50
A comparison between the results obtained from a Computational Fluid Dynamic (CFD) simulation and from the application of an empirical formula for determining the temperature distribution inside a tunnel in case of fire is presented. The temperature is measured and calculated at different distances from the location of the fire and at different time intervals. The fire considered varies with time following a time-heat release rate curve which has a parabolic growing phase, a constant period and a linear decay. The comparison reveals differences in the results. The temperatures calculated with the empirical formula resulted higher than the temperatures obtained by means of the CFD simulation. A list of possible reasons for this limited correspondence is also presented and commented. A proposal for further studies to better define the limitations of both the procedures and to define the influence of each parameter involved is finally presented.
The Kemnitz et al. developed a fluorolytic route to access metal fluorides 1 such as AlF3 2 and MgF2 3 which possess a high surface area. In aluminium-based systems, the synthetic approach led to amorphous xerogels that can be further converted into Lewis superacids.2 Still, despite zirconium oxide being described as a stronger Lewis acid than other metal oxides4 zirconium fluoride-based materials have only recently been reported or investigated. In this work we extend the class of amorphous Lewis acidic heterogeneous catalysts to an amorphous ZrF4 that is active in C-F bond activation.
Kemnitz et al. developed a fluorolytic route to access metal fluorides 2 such as AlF3 3 and MgF2 4 which possess a high surface area. In aluminium-based systems, the synthetic approach led to amorphous xerogels that can be further converted into Lewis superacids.3 Still, despite zirconium oxide being described as a stronger Lewis acid than other metal oxides 4 zirconium fluoride-based materials have only recently been reported or investigated. 6 In this work we extend the class of amorphous Lewis acidic heterogeneous catalysts to an amorphous ZrF4 that is active in C-F bond activation.
The main solidification parameters, namely the crystal axis, the growth rate, and the cross-sectional area of the columnar crystal control the primary microstructure and thus the final weld seam properties.
Limited understanding of solidification parameters due to complexities in experimental and theoretical weld pool boundary determination and
its mathematical description.
Application of local Lamé curves for efficient weld pool boundary reconstruction Derivation of general analytical solutions for the main solidification parameters of a two-dimensional columnar crystal growth during laser beam welding of thin steel sheets.
The Lamé curves approximation technique was successfully applied for the reconstruction of the rear part of the two-dimensional steady-state weld pool boundary. General analytical expressions for the main solidification parameters, namely the crystal axis, the growth rate and the cross-sectional area of the crystal were derived.
The derived expressions and herewith obtained results were verified and validated by comparing them to known theoretical solutions and experimental measurements. Dimensionless analysis of the influence of the size and shape of the rear weld pool boundary on the solidification parameters was provided.
The derived general solutions and the analysis provided allow for critical welding parameters to be estimated and adapted accordingly to improve the welding process.
The system Na2O.B2O3-SiO2 (NBS) is the basis of many industrial glass applications and therefore one of the most studied systems at all. Glass formation is possible over a wide compositional range, but the system also contains ranges of pronounced phase separation and crystallization tendency. Despite its importance, experimental data are limited to few compositional areas. The general understanding and modelling of glass formation, phase separation, and crystallization in this system would therefore be easier if small step melt series could be studied. The efficient melting of such glass series is now possible with the new robotic glass melting system at the Federal Institute for Materials Research and Testing (BAM, Division Glasses). Using three exemplary joins within this NBS system, the small step changes of glass transition temperature (Tg), crystallization behavior as well as glass density (Roh) was studied. Additionally, experimental Tg and Roh data were compared with their modeled counterparts using SciGlass and a newly developed DFT model, respectively.
A new tank design for Hazmat
(2016)
Initial studies have shown pre-deformed honeycomb structure
pressure vessels to have comparable burst pressure to straight steel vessels.
It was shown that honeycomp structured tanks have a higher energy absorption than straight steel tanks.
Future studies will investigate optimization of the deformed plate, to determine if increased payloads or a reduced wall thickness can be achieved.
One of today’s major problems in many technical plants as well as fuel tanks is Microbial induced corrosion (MIC), leading to considerable damage and huge financial losses. Successful prevention of MIC requires the localization of first signs of corrosion as well as the identification of factors influencing the corrosion process. Hence, there is a growing need for sensitive and preferably inexpensive tools that enable the early detection of MIC. Of utmost importance are methods, which provide spatially and time-resolved information and allow the determination of corrosion rates at sites of interest for possible prevention of MIC.
Understanding the chemistry and nature of individual chemical bonds is essential for materials design. Bonding analysis via the LOBSTER software package has provided valuable insights into the properties of materials for thermoelectric and catalysis applications. Thus, the data generated from
bonding analysis becomes an invaluable asset that could be utilized as features in large-scale data analysis and machine learning of material properties. However, no systematic studies exist that conducted high-throughput materials simulations to curate and validate bonding data obtained from LOBSTER. Here we present an approach to constructing such a large database consisting of quantum-chemical bonding information.
A deep insight into the chemistry and nature of individual chemical bonds is essential for understanding materials. Bonding analysis is expected to provide important features for large-scale data analysis and machine learning of material properties. Such information on chemical bonds can be calculated using the LOBSTER (www.cohp.de) software package, which post-processes data from modern density functional theory computations by projecting plane wave-based wave functions onto a local atomic orbital basis. We have performed bonding analysis on 1520 compounds (insulators and semiconductors) using a fully automated workflow combining the VASP and LOBSTER software packages. We then automatically evaluated the data with LobsterPy (https://github.com/jageo/lobsterpy) and provide results as a database. The projected densities of states and bonding indicators are benchmarked on VASP projections and available heuristics, respectively. Lastly, we illustrate the predictive power of bonding descriptors by constructing a machine-learning model for phononic properties, which shows an increase in prediction accuracies by 27 % (mean absolute errors) compared to a benchmark model differing only by not relying on any quantum-chemical bonding features.
When it comes to higher accuracies, new technologies and real applications in additive manufacturing, there is one topic which cannot be avoided: The material response on the chosen processing parameters and its agreement and correspondence with literature data of the wrought material grade counterpart. In industrial Additive Manufacturing (AM) standards in terms of printing parameters, protection gas atmospheres or powder handling instructions are not obligatory. Therefore, the question must be answered whether the AM process is reproducible and reliable over different printing companies. This was the motivation to realize a round robin test between 8 European printing companies and academic partners. The consortium had printed and tested fatigue and tensile testing bars under plant-specific conditions. A commonly used cast aluminum alloy, AlSi10Mg, was chosen as test material for the PBF-LB/M process. Differences of the results between the partners and the scatter itself were discussed in detail.
Polynuclear aluminium species (Al13 keggin cluster) find application in different areas like water purification [1], contaminant transport [2], and as pilling clays with high specific surface areas[3], due to their strong binding ability to aggregates and high positive charge.
In the present contribution, we report on the in situ investigation of the Al13 sulfate synthesis by synchrotron wide-angle X-ray scattering (WAXS). Al13 cluster were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using a custom-made acoustic levitator as sample holder. The study provides information about the intermediates during the crystallization process. From the data, a mechanism was derived indicating the influence of the crystallization process.
Polynuclear aluminium species (Al13 keggin cluster) find application in different areas like water purification, contaminant transport, and as pilling clays with high specific surface areas, due to their strong binding ability to aggregates and high positive charge.
In the present contribution, we report on the in situ investigation of the Al13 sulfate synthesis by synchrotron wide-angle X-ray scattering (WAXS). Al13 cluster were crystallized by precipitating hydrolyzed aluminum solutions by the addition of sodium sulfate. The measurements were performed using a custom-made acoustic levitator as sample holder. The study provides information about the intermediates during the crystallization process. From the data, a mechanism was derived indicating the influence of the crystallization process.
Ziel der Untersuchungen war es, herauszufinden ob die Druckfestigkeit hochfester Betone zerstörungsfrei mit dem Rückprallhammer PROCEQEQUOSCHMIDT durch Ermittlung des klassischen Rückprallwerts R in Kombination, mit einem aus der Untersuchung von Metallen bekannten neuen Messwert L mit ausreichender Sicherheit beschrieben werden kann.
Additive manufacturing (3D printing) of ceramics and other materials offers significant advantages compared to conventional production processes for several applications. While ceramics have been extensively investigated in this regard, additive manufacturing of geopolymers have received much less attention to date. In the present contribution we study a ‘standard’ metakaolin-based geopolymer, a fly ash-based geopolymer and a silica-based one-part geopolymer regarding their suitability for additive manufacturing via selective laser curing. Model geometries such as bars and cuboids could be produced by this route. After selective laser curing the specimens were additionally cured at 80 °C for 24 h. The specimens were studied by means of scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). SEM showed that the precursors in all geopolymers had reacted partially and geopolymeric gel had formed. XRD confirmed these results and additionally revealed that the crystalline byproducts (zeolites) in the one-part geopolymer differed from the byproducts observed in conventionally produced samples. This indicates that also the geopolymerization reactions differ between the two synthesis routes. The mechanical strength after selective laser curing and 80 °C-curing appeared to be highest for the metakaolin-based geopolymer. However, SEM also showed that a significant volume of macropores remained in most regions of all specimens, while some regions in the metakaolin-based geopolymer appeared to be significantly denser. These preliminary results demonstrate that selective laser curing offers potential for the production of geopolymers, but more research has to be undertaken to optimize the process.
The EC’s recommendation for a definition of nanomaterial (2011/696/EU) should allow the identification of a particulate nanomaterial based on the number-based metric criterion according to which at least 50% of the constituent particles have the smallest dimension between 1 and 100 nm. However, it has been recently demonstrated that the implementation of this definition for regulatory purposes is conditioned by the large deviations between the results obtained by different sizing methods or due to practical reasons such as high costs and time-consuming (SEM, TEM).
Within the European project NanoDefine (www.nanodefine.eu) a two-tier approach has been developed, whereby firstly a screening method is applied for the rough classification as a nano-/non-nanomaterial, and for borderline cases a confirmatory method (imaging methods or field flow fractionation) must be considered.
One of the measurement methods well suited to particulate powder is the determination of volume-specific surface area (VSSA) by means of gas adsorption as well as skeletal density. The value of 60 m2/cm3 corresponding to spherical, monodisperse particles with a diameter of 100 nm constitutes the threshold for decisioning if the material is a nano- or non-nanomaterial. The correct identification of a nanomaterial by VSSA method is accepted by the EU recommendation.
However, the application of the VSSA method is associated also by some limitations. The threshold of 60 m2/cm3 is dependent on the particle shape, so that it changes considerably with the number of nano-dimensions of the particles. For particles containing micro-pores or having a microporous coating false positive results will be produced. Furthermore, broad particle size distributions make necessary to adjust the threshold. Based on examples of commercially available ceramic powders, the applicability of the VSSA approach will be tested (in relation with SEM and TEM measurements) in order to expand the actual knowledge and to improve this good available and agglomeration tolerant method.
The EU recommendation for a definition of nanomaterial (2011/696/EU) should allow the identification of a particulate nanomaterial based on the number-based metric criterion according to which at least 50% of the constituent particles have the smallest dimension between 1 and 100 nm. Within the European Project NanoDefine (www.nanodefine.eu) a two-tier approach has been developed, whereby firstly a screening method is applied for the rough classification as a nanomaterial or non-nanomaterial, and for borderline cases a confirmatory method (imaging methods or field flow fractionation) must be considered.
One of the measurement methods well suited to particulate powder is the determination of volume-specific surface area (VSSA) by means of gas adsorption as well as skeletal density. The value of 60 m2/cm3 corresponding to spherical, monodisperse particles with a diameter of 100 nm constitutes the threshold for decisioning if the material is a nanomaterial or non-nanomaterial. The correct identification of a nanomaterial by VSSA method (positive test) is accepted by the EU recommendation.
However, the application of the VSSA method is associated also by some limitations. The threshold of 60 m2/cm3 is dependent on the particle shape. For particles containing micro-pores or having a microporous coating, false positive results will be produced.
Furthermore, broad particle size distributions – as typically for ceramic materials – as well as multi-modal size distributions make necessary to adjust the threshold.
Based on examples of commercially available ceramic powders, the applicability of the VSSA approach will be tested (in relation with SEM and TEM measurements) in order to expand the actual knowledge and
improve the method.
Die Rasterkraftmikroskopie (AFM) hat sich in den letzten Jahren als eine vielseitige Abbildungstechnik von Oberflächen mit einer sehr hohen Ortsauflösung etabliert. Über die Untersuchung der reinen Oberflächentopographie sind erweiterte Modi in der Lage, gleichzeitig Informationen über die elektrischen und magnetischen Eigenschaften sowie Adhäsionsprozesse auf Oberflächen zu liefern. Interessanter wird es, wenn das AFM mit geeigneten Messzellen für in-situ-Untersuchungen in kontrollierten Atmosphären oder in Elektrolyten unter elektrochemischer Kontrolle ausgestattet ist. Dies ermöglicht die Untersuchung von Korrosions- und Adhäsionsprozessen unter Bedingungen, die die Betriebsumgebung repräsentieren.
Ein aktueller Forschungsschwerpunkt unseres Fachbereiches liegt in den Untersuchungen der Deformationseigenschaften von Funktionsschichten auf Leichtmetalllegierungen, sowie in situ Untersuchungen des Korrosionsverhaltens unter kombinierter korrosiver und mechanischer Beanspruchung mittels AFM. Durch die Integrierung eines Zug-Druckmoduls in den Probentisch des Rasterkraftmikroskops haben wir jetzt die Möglichkeit, verschiedene Materialien uniaxialen Umformversuchen mit bis zu 5 kN Kraft zu unterziehen. Dabei können unter anderem auch zyklische Belastungen genutzt werden, um Ermüdungsprozesse zu simulieren. Da die Messungen in situ ohne die De- und Remontage der Probe durchgeführt werden, ermöglicht der Aufbau nicht nur Messungen mit präziser Positionssteuerung, sondern auch die Untersuchung von Prozessen im elastischen Bereich, die für die Aufklärung der Mechanismen, die zu Ermüdungsversagen führen, entscheidend sind.
Die Posterpräsentation wird detaillierte Informationen zum neuen AFM-Setup liefern und unsere aktuellen Ergebnisse zur Verformung dünner Schutzschichten auf AA2024-T3 zusammenfassen.
The copper alloyed stainless steel 1.4542 (X5CrNiCuNb16-4) is used in different areas due to its good mechanical properties and corrosion resistance. Strength and corrosion resistance can be adjusted by the heat treatment, which is of importance for the application of this alloy. The mechanical properties (strength and hardness) are attributed to the dispersive precipitation of the copper rich ε–Phase. The additional precipitation of chromi-um carbides can reduce the corrosion resistance. Different ageing states were produced to investigate the precipitation behaviour with various methods. Furthermore, the influence of cold-rolling on the precipitation behaviour was studied in comparison to a solution annealed state without deformation. The microstructure was studied by SEM and the variations of hardness and magnetic proportion were characterised. The electrochemical potentiodynamic reactivation (EPR) was used to determine the corrosion resistance and detect chromium depletion in all heat-treated states. The results show that a work hard-ening accelerates the precipitation rate, while ageing at 600 °C reduces the corrosion resistance due to chromium depletion.
The copper alloyed stainless steel 1.4542 (X5CrNiCuNb16-4) is used in different areas due to its good mechanical properties and corrosion resistance. Strength and corrosion re-sistance can be adjusted by the heat treatment, which is of importance for the application of this alloy. The mechanical properties (strength and hardness) are attributed to the dispersive precipitation of the copper rich ε–Phase. The additional precipitation of chromium carbides can reduce the corrosion resistance. Different ageing states were produced to investigate the precipitation behaviour with various methods. Furthermore, the influence of cold-rolling on the precipitation behaviour was studied in comparison to a solution annealed state without deformation. The microstructure was studied by SEM and the variations of hardness and magnetic proportion were characterised. The electrochemical potentiodynamic reactivation (EPR) was used to determine the corrosion resistance and detect chromium depletion in all heat-treated states. The results show that a work hardening accelerates the precipitation rate, while ageing at 600 °C reduces the corrosion re-sistance due to chromium depletion.
Eine umfangreich ausgestaltete Trinkwasseraufbereitung als Multibarrieren-System ist notwendig, wenn das Rohwasser direkt aus Fließgewässern entnommen wird (z. B. für das Mülheimer Verfahren). Eine der Barrieren wird, als gezielte Behandlungs- oder Sicherheitsstufe, oft als Filter mit granulierter Aktivkohle (GAK-Filter) realisiert. Ihre Standzeit kann bei geringer Wasserbelastung (DOC < 2 mg/L), z. B. bei der Landeswasserversorgung Langenau, bis zu 5 Jahre betragen. Bei Rohwasser mit höherem Organikgehalt (DOC > 7 mg/L), wie bei der Nordwasser in Rostock, wird hingegen mindestens alle drei Jahre die GAK in den Filterkolonnen ausgetauscht.
Die Rest-Adsorptionskapazität der GAK kann durch verschiedene Verfahren abgeschätzt werden, ist aber nach wie vor Gegenstand aktueller Forschung. Die weitergehende Charakterisierung der beladenen GAK kann hierbei helfen.
Auf dem Poster sollen erste Ergebnisse zu den in Langenau und Rostock eingesetzten Aktivkohlen präsentiert werden. Hierzu wurden die frischen und nach unterschiedlichen Laufzeiten beladenen GAK untersucht. Die Zusammensetzung der Anorganik und der adsorbierten Organik, welche mittels Zersetzungs¬gasanalyse charakterisiert wurde, zeigt deutliche Unterschiede. Bspw. nimmt der Calcium-Gehalt der GAK in Langenau kontinuierlich zu, wohingegen dieser in den Proben aus Rostock mit zunehmender Laufzeit zurückgeht. Umgekehrt verhält es sich mit der Organik: Die GAK aus Rostock zeigen Hinweise auf biologische Besiedelung, während diese in Langenau trotz längerer Filterlaufzeit auszubleiben scheint.
Zur Vermeidung der schädigenden Alkali-Kieselsäure-Reaktion in Betonbauwerken wird die Alkalireaktivität von Gesteinskörnungen im Vorhinein getestet. Der 60°C-Betonversuch ermöglicht eine vergleichsweise schnelle Einschätzung nach fünf-monatiger Testzeit. Dazu wird die Dehnung von Betonprüfkörpern, die mit der zu testenden Gesteinskörnung hergestellt wurden, manuell alle 28 Tage gemessen. Ein alternatives, an der BAM in den vergangen Jahren entwickeltes Verfahren setzt Dehnungssensoren ein, um kontinuierlich und online zu messen. Die Dehnungskurven sind eine gute Grundlage sowohl für die Prognose vom Expansionsverhalten während des Tests als auch für die Validierung von Expansionsmodellen.
The full-notch creep test (FNCT) is a common method to evaluate the environmental stress cracking (ESC) behavior of high-density polyethylene (PE-HD) container materials . The test procedure as specified in ISO 16770 provides a comparative measure of the resistance against ESC using the time to failure of specimens mechanically loaded in a well-defined liquid environment. Since the craze-crack damage mechanism underlying the ESC process is associated with brittle failure, the occurrence of globally brittle fracture surfaces is a prerequisite to consider an FNCT measurement as representative for ESC . Therefore, an optical evaluation of FNCT fracture surfaces concerning their brittleness is essential. Due to the experimental setup, an inevitable increase of the true mechanical stress and the associated appearance of small ductile parts on fracture surfaces is induced in any case. Hence, an FNCT experiment is considered as 'valid', if the corresponding fracture surface is predominantly brittle . Based on laser scanning microscopy (LSM) height data of FNCT fracture surfaces , a universal and easy-to-use phenomenological criterion was developed to assess the validity of distinct FNCT experiments. This criterion is supposed to facilitate a quick evaluation of FNCT results in practical routine testing.
Due to their excellent combination of ductility, strength and corrosive resistance, austenitic stainless steels (ASS) are widely used in many industrial applications. Thus, these steel grades can be found as structural components in the (petro-)chemical industry, in offshore applications and more recent for storage and transport of hydrogen fuel. Steels employed for these applications are exposed to aggressive environments and hydrogen containing media. The ingress and accumulation of hydrogen into the microstructure is commonly observed during service leading to a phenomenon called “hydrogen embrittlement”. A loss in ductility and strength, the formation of cracks and phase transformations are typical features of this hydrogen-induced degradation of mechanical properties.
Although, great efforts are made to understanding hydrogen embrittlement, there is an ongoing debate of the underlying mechanisms. This knowledge is crucial for the safe use and durability of components on the one side and the development of new materials on the other.
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was proven to be a powerful tool for depicting the distribution of the hydrogen isotope deuterium in the microstructure of austenitic and duplex steels. The combination with imaging techniques such as electron backscatter diffraction (EBSD) and scanning electron microscopy (SEM), delivering structural and morphological information, creates a comprehensive picture of the hydrogen/deuterium-induced effects in the materials. All the gathered data is treated with principal component analysis (PCA) and data fusion to enhance the depth of information.
The mobility of hydrogen and deuterium in a steel microstructure is affected by external mechanical stress. To investigate the behaviour of deuterium in a strained microstructure, a new in situ experimental approach was developed. This gives the possibility of analysing samples in the SIMS instrument simultaneously to four-point-bending-tests.
Specimens made from ASS AISI 304L were electrochemically charged with deuterium instead of hydrogen. This necessity stems from the difficulty to separate between artificially charged hydrogen and hydrogen existing in the pristine material or adsorbed from the rest gas in the analysis chamber. Nonetheless, similar diffusion, permeation and solubility data allow to draw qualitative conclusions from the experiments, which are relevant for the application addressed.
Porous materials play an important role in several fields of technology, especially for energy applications like photovoltaics, electrolysis or batteries. The activity of porous films is affected by properties like porosity, film thickness, chemical composition of the material as well as the crystallinity of the framework. The complex morphology of such porous films constitutes a challenge even for modern analytical techniques and requires new approaches employing the combination/complementation of data of different analytical methods. In this contribution we characterize thin mesoporous iridium-titanium mixed oxide film properties by Electron Probe Microanalysis (EPMA) with energy dispersive X-ray spectroscopy (EDS) at an SEM.
Analysis of elemental composition of Fe1-xNix and Si1-xGex alloy thin films by EPMA and µ-XRF
(2019)
The present study reports on measurements on thin Fe-Ni films on silicon and first-time results of analysis on Si-Ge thin films deposited on a non-conductive aluminium oxide Substrate by electron probe microanalysis (EPMA). Standard-based and standardless EPMA (with EDS) results were used in combination with the thin film analysis software Stratagem for the quantification.
Further, X-ray fluorescence analysis (XRF) can be used for the determination of elemental composition and thickness of such films as well. In this case, XRF with a μ-focus X-ray source (μ-XRF) attached to a SEM was applied. For quantification, a fundamental parameter (FP) approach has been used to calculate standard-based and standardless results.
Both thin film systems have been chosen as samples of an international round robin test (RRT) organised in the frame of standardisation technical committee ISO/TC 201 ‘Surface chemical analysis’, under the lead of KRISS. The main objective of the RRT is to compare the results of atomic fractions of Fe1-xNix and Si1-xGex alloy films obtained by different surface Analysis techniques, such as X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES), and secondary ion mass spectrometry (SIMS) applied in the depth-profiling operation mode.
Five samples of different atomic fractions of each thin film system, i.e., Fe1-xNix and Si1-xGex, have been grown by ion beam sputter deposition on silicon and Al2O3 wafers, respectively. Reference FeNi and SiGe films with well-known elemental composition and thickness have been also supplied for standard-based analysis. An excellent agreement has been obtained between the atomic fractions determined by EPMA and µ-XRF with the KRISS certified values.
Due to the favorable properties of polymers, their production and thus their input into the environment has increased significantly in recent decades. Currently, FTIR or Raman spectroscopy are mainly applied for the analysis of microplastic particles (MP) in environmental samples. However, these methods have great difficulties in determining metrologically traceable MP values, especially with regard to the limiting values, as preferred in regulation. Therefore, we developed a systematic and fast thermoanalytical method called TED-GC-MS (thermal extraction desorption gas chromatography mass spectrometry), which determines mass contents. Now the current goal is the determination of its process parameters.
This poster illustrates the theoretical requirements for MP analysis (left side) and contrast them with the current state of research (right side).Unexpected practical problems are presented and the relatively new method is discussed concerning the quality requirements of well-established methods such as LC-or GC-MS.
The present study addresses the capability of measurement of relative particle number concentration by scanning electron microscopy for model bimodal silica and gold samples prepared in the frame of the European research project “nPSize - Improved traceability chain of nanoparticle size measurements” as candidate reference nanoparticles.
Analytical model for ball-lensed couplers to calculate the insertion loss for each optical mode. The basis for the calculation are commercial perfluorinated polymer optical (PFGI-POFs) and silica based fibres (SOFs). The modal power distribution for given misalignments are presented as well as the reflection-based losses at all optical interfaces. Additionally, the ball-lensed interconnection between PFGI-POF and SOF was theoretically demonstrated.
The degradation effect of hydrogen on the mechanical properties of steels is well known, but still not sufficiently understood. The fast and safe market ramp up of hydrogen technologies makes it evident to evaluate a wider understanding of this topic. In general it is often described as hydrogen embrittlement. Therefore it is desirable to achieve a test method which is able to provide material properties under hydrogen atmosphere in an easy way. Currently mechanical tests under hydrogen atmosphere are executed in autoclaves. For this technique complex hardware is needed, therefore tests are expensive and test capacities are only available in a small scale. The shown test method promises a trendsetting approach for reducing costs and machine time by using hollow specimen.
Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear
equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.
Aqueous dispersions of polypropylene: towards referencematerials for nanoplastics characterization
(2022)
Plastic pollution in the environment is a rising concern for the health of our planet. The plastic litter that pollutes our environment leads to microplastic particles. They can be found (nearly) everywhere. The processes that lead to microplastic can also form nanoplastic particles, which have a size below 1 µm. Because of the small size they can penetrate tissue more easily. Only few risk assessment studies of nanoplastics were carried out so far.
Using polystyrene (PS) nanoparticles to test effects on organisms is easy because it is commercially available. However, this falls a little short, as the polyolefins i.e., polypropylene (PP) and polyethylene (PE), are produced in a larger proportion than PS. Moreover, these plastics are mainly used for disposable products, which means that they also account for a large proportion of plastic waste. Therefore, the percentage of polyolefins in environmental nanoplastic is presumably high. It is important to test the toxicological effects also with nanoplastics made of PP and PE to have more realistic results.
Herein, we present an easy and repeatable method to prepare an aqueous dispersion of polypropylene nanoplastics (nano-PP). They are stabilized electrostatically, resulting in a strongly negative zeta potential of -43 mV (± 2 mV) and making no surfactant necessary to keep the dispersion stable.
The size and the size distribution were determined via Dynamic Light Scattering (DLS) and gives a hydrodynamic diameter of 180.5 nm (± 5.8 nm) and a PDI of 0.084 (± 0.023).
Finally, ca. 480 bottles of the dispersion with a volume of 10 mL each were prepared to serve as a potential reference material for further testing of detection methods or risk assessments.
A series of aroyl-S,N-ketene acetal based bichromophores is readily synthesized by Buchwald-Hartwig amination and Ullmann reaction in moderate to good yields. The aminated aroyl-S,N-ketene acetals are emissive in the solid state and in the aggregate, but not in solution, thus, they are AIEgens (aggregation induced emission chromogens). Aggregation is induced by fractional alternation of the solvent mixture, here by increasing the water fraction of ethanol/water mixtures. For most derivatives, the emission upon induced aggregation stems solely from the aroyl-S,N-ketene acetal chromophore, regardless whether excitation occurs at the absorption maximum of the triarylamine or the aroyl-S,N-ketene acetal. Therefore, a pronounced energy transfer from the triarylamine donor to the aroyl-S,N-ketene acetal acceptor can be inferred. The color of the emission can be controlled by choosing the para-aroyl substituent. A partial energy transfer could also be observed for some bichromophores, leading to aggregation-induced dual emission (AIDE). In addition, four examples of aminated diaroyl-S,N-ketene acetals were added to the compound library. The electron-withdrawing properties of the additional aroyl group provide a bathochromic shift of the emission band of the aroyl-S,N-ketene acetal. These bichromophores also show AIDE and in one case even aggregation-induced white light emission as a result of additive color mixing.
The understanding of process-microstructure-property-performance (PMPP) relationships in additive manufacturing (AM) of metals is highly necessary to achieve wide-spread industrial application and replace conventionally manufactured parts, especially regarding safety-relevant applications. To achieve this understanding, reliable data and knowledge regarding material’s microstructure-property relationships (e.g. the role of defects) is needed, since it represents the base for future more targeted process optimizations and more reliable calculations of performance. However, producing reliable material data and assessing the AM material behaviour is not an easy task: big challenges are e.g. the actual lack of standard testing methods for AM materials and the occasional difficulties in finding one-to-one comparable material data for the conventional counterpart.
This work aims to contribute to end this lack of reliable material data and knowledge for the low cycle fatigue behaviour of the most used titanium alloy in aerospace applications (Ti-6Al-4V). For this purpose, two sets of test specimens were investigated. The first set was manufactured from cylindrical rods produced by an optimized DED-L process and the second was manufactured from a hot formed round bar. The test specimens were cyclically loaded until failure in the low-cycle-fatigue (LCF) regime. The tests were carried out according to ISO 12106 between 0.3 to 1.0 % axial strain amplitude from room temperature up to 400°C. The LCF behaviour is described and compared between materials and with literature values based on cyclic deformation curves and strain-based fatigue life curves. Besides, the parameters of Manson-Coffin-Basquin relationship were calculated. The microstructures (initial and after failure) and fracture surfaces were comparative characterized. Thereby, the focus lied on understanding the role of grain morphology and defects on the failure mechanisms and fatigue lifetimes. For this latter characterization, optical microscopy (OM), scanning electron microscopy (SEM) and micro computed tomography (µCT) were used.
Algal biofilm façades are an alternative to traditional green façades which can help to improve biodiversity and air quality within cities. They present a low maintenance approach in which subaerial algae are grown directly on concrete substrates. The intrinsic bioreceptivity of the substrate is a critical factor in successful facade colonisation. Existing research has identified several environmental and material properties which influence concrete bioreceptivity, however a consensus has yet to be made on which properties are most influential and how the interaction between properties may promote algal biofilm growth under specific conditions.
Heating oil storage tanks made of polyethylene grades have been on the market in Germany since the early 1970s. To ensure safety, their replacement is recommended by tank manufacturers after a period of 30 years. Polyethylene is subject to ageing by alteration of the properties during its life cycle. The degree of degradation and the nature of the process mainly depend on the chemical alteration of the polyethylene, the wall thickness of the tank and the environmental conditions. There are no data available on the long-term behaviour of the polyethylene grades, especially after a service life of more than 30 years.
The aim of this investigation was to find a suitable test method to determine the factual degree of damage in comparison to the uncontaminated polyethylene grades. Material data of the used polyethylene grades are available because the BAM was the competent authority for the tests and expert reports for the approval of these tanks until the middle of the 1990s. Therefore, tank sections from the bottom, the shell and the roof of 22 individual storage tanks produced of polyethylene grades A and B have been examined by Melt Flow Rate (MFR) and Attenuated Total Reflectance (ATR). Their service life was in the range between 20 and 41 years.
The MFR measurements of the tank sections showed differences in the values depending on the weight which was used (5 kg or 21.6 kg). An increase of the MFR was determined for the samples of polyethylene grade A, whereas a reduction of the MFR values was measured for most samples of polyethylene grade B. This grade is mainly subject to the internal ageing by cross-linkages, increased degree of branched molecules and loss of the plasticizer.
ATR analysis exhibits an absorption band at 909 cm‒1 predominantly in samples of polyethylene grade A indicating chain scission and concomitantly formed terminal vinyl groups. This absorption band can be used for the characterization of the ageing of the polyethylene grades.
We created a workflow that fully automates bonding analysis using Crystal Orbital Hamilton Populations, which are bond-weighted densities of states. This enables understanding of crystalline material properties based on chemical bonding information. To facilitate data analysis and machine-learning research, our tools include automatic plots, automated text output, and output in machine-readable format.