Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Posterpräsentation (779) (entfernen)
Sprache
- Englisch (648)
- Deutsch (130)
- Französisch (1)
Schlagworte
- Corrosion (36)
- Additive manufacturing (29)
- Mechanochemistry (24)
- Glass (20)
- Nanoparticles (19)
- Additive Manufacturing (17)
- Crystallization (17)
- Degradation (14)
- Fluorescence (14)
- In situ (14)
- Computed tomography (13)
- Residual stress (13)
- Korrosion (12)
- Biofilm (11)
- Hydrogen (11)
- Laser-induced periodic surface structures (LIPSS) (11)
- Microstructure (11)
- SAXS (11)
- Catalysis (10)
- Methanogens (10)
- Nanoparticle (10)
- Sintering (10)
- Thermography (10)
- X-ray refraction (10)
- Boehmite (9)
- Stainless steel (9)
- Cocrystal (8)
- Computed Tomography (8)
- KorroPad (8)
- Laser powder bed fusion (8)
- Quality assurance (8)
- AFM (7)
- Corrosion resistance (7)
- EPR (7)
- Heat treatment (7)
- Nichtrostender Stahl (7)
- PE-HD (7)
- Selective laser melting (7)
- Synthesis (7)
- 316L (6)
- Amorphous phases (6)
- Automation (6)
- Creep (6)
- DNA (6)
- Dosimetry (6)
- Electron microscopy (6)
- Femtosecond laser ablation (6)
- Geant4 (6)
- Heterogeneous catalysis (6)
- MIC (6)
- MOFs (6)
- Microdosimetry (6)
- Neutron diffraction (6)
- Oxidation (6)
- Phosphates (6)
- Polymer (6)
- Polymorphism (6)
- Prüfmethode (6)
- Qualitätssicherung (6)
- Simulation (6)
- ToF-SIMS (6)
- Welding (6)
- Aluminium (5)
- Archaea (5)
- C-F bond activation (5)
- Coarsening (5)
- DFT (5)
- Dielectric spectroscopy (5)
- Duplexstahl (5)
- Dye (5)
- FTIR (5)
- Gefahrgut (5)
- Gefahrstoff (5)
- LEE (5)
- Laser Powder Bed Fusion (5)
- Milling (5)
- Nanocomposite (5)
- Nanocomposites (5)
- Niobium carbide (NbC) (5)
- Polymorph (5)
- Quantum dot (5)
- Radiation damage (5)
- Reference material (5)
- Self-healing (5)
- Silver nanoparticles (5)
- Struvite (5)
- ThermoCalc (5)
- Thin films (5)
- Transition metal (5)
- Transmission electron microscopy (5)
- UHPC (5)
- Wear (5)
- XANES (5)
- Ageing (4)
- AlSi10Mg (4)
- AuNP (4)
- Bioactive (4)
- Composite-Druckgefäße (4)
- Concrete (4)
- Corrosion testing (4)
- Crack growth (4)
- DCB (4)
- DNA damage (4)
- Diesel (4)
- Digitalisierung (4)
- Discotic Liquid Crystals (4)
- Energy deposit (4)
- FAIR (4)
- Fatigue (4)
- Flexible crystals (4)
- Friction (4)
- Geant4-DNA (4)
- Graphene (4)
- Hardness (4)
- Hydrogen assisted cracking (4)
- Implants (4)
- Inconel 686 (4)
- Iron oxide nanoparticles (4)
- LIBS (4)
- Laser Beam Melting (4)
- Laser profilometry (4)
- Low energy electrons (4)
- MCS (4)
- Metal phosphonates (4)
- Microplastic (4)
- Monte-Carlo simulation (4)
- NMR (4)
- Nano (4)
- Nanoconfinement (4)
- Nanoplastic (4)
- Pitting corrosion (4)
- Polymers (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- Ringversuch (4)
- SEM (4)
- Spectroscopic ellipsometry (4)
- Steel (4)
- Sulfidation (4)
- Synchrotron (4)
- TEM (4)
- TiO2 (4)
- Tribology (4)
- Upconversion (4)
- Validierung (4)
- X-ray diffraction (4)
- XRD (4)
- 3D High-temperature shape screening (3)
- AM (3)
- Ab-initio (3)
- Additive Fertigung (3)
- Alloy 2618A (3)
- Assay (3)
- Bending modulus (3)
- Beta decay (3)
- Biodiesel (3)
- Bitumen (3)
- Bonding analysis (3)
- Brachytherapy (3)
- Cancer treatment (3)
- Carbon nanotubes (3)
- Cermets (3)
- Clustered nanoparticles (3)
- Coating (3)
- Computational Chemistry (3)
- Conductivity (3)
- Corundum grinding (3)
- Dangerous goods (3)
- Database (3)
- Diffusion coefficient (3)
- EBSD (3)
- Ellipsometry (3)
- Environmental Simulation (3)
- Epoxy (3)
- Flourescence (3)
- Flow cytometry (3)
- Glass ceramic (3)
- Glass composition (3)
- Gold Nanoparticles (3)
- Imaging (3)
- Korrosionsbeständigkeit (3)
- Korundschleifen (3)
- LCF (3)
- Laser cladding (3)
- Laser implantation (3)
- Livermore model (3)
- Luminescence (3)
- MIPs (3)
- Machine learning (3)
- Martensitic stainless steels (3)
- Materialcharakterisierung (3)
- Materials Informatics (3)
- Mesoporosity (3)
- Metallographie (3)
- Metrology (3)
- Microbial induced corrosion (3)
- Microbiologically influenced corrosion (3)
- Micropatterning (3)
- Microplastics (3)
- Microscopy (3)
- Monitoring (3)
- NDT (3)
- NP (3)
- NTE (3)
- Nanofibers (3)
- Nanomaterial (3)
- Nichtrostende Stähle (3)
- OECD (3)
- OER (3)
- OH radical (3)
- Oberflächenbearbeitung (3)
- Optical spectroscopy (3)
- Orientation (3)
- Oxygen Reduction Reaction (3)
- PGM-free catalyst (3)
- PXRD (3)
- Penelope model (3)
- Phase grating (3)
- Polydopamine (3)
- Polyethylene (3)
- Polymer blends (3)
- ProMoAM (3)
- Quantum dots (3)
- REACH (3)
- Radiation therapy (3)
- Radiolysis (3)
- Raman Spectroscopy (3)
- Reactive extrusion (3)
- Reference data (3)
- Residual Stress (3)
- Rigidity (3)
- Röntgenrefraktion (3)
- SLM (3)
- Sample preparation (3)
- Schadensanalyse (3)
- Schweißen (3)
- Sensibilisierung (3)
- Sialic acid (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- Specific heat spectroscopy (3)
- Strahlen (3)
- Surface chemistry (3)
- Synchrotron tomography (3)
- TDEP (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermoelectrics (3)
- Thin Films (3)
- Thin polymeric films (3)
- Ti-6Al-4V (3)
- Two-photon polymerisation (3)
- VSSA (3)
- Vickers (3)
- WAXS (3)
- Waveguide (3)
- Wärmebehandlung (3)
- X-ray fluorescence (3)
- XPS (3)
- ZCF (3)
- ZrF4 (3)
- particle scattering (3)
- 3D (2)
- AGIL (2)
- AIS (2)
- ATR (2)
- Absorption edge tomography (2)
- Adaptives Schweißen (2)
- Adsorbed Layer (2)
- Aktivkohle (2)
- Alkali-silica-reaction (2)
- Alterung von Pyrotechnik (2)
- Aluminium alloys (2)
- Aluminum (2)
- Antimicrobials (2)
- Atomic packing factor (2)
- Atomization (2)
- Austenitic stainless steel (2)
- BAMline (2)
- Bacteria (2)
- Bacterial adhesion (2)
- Barcoding (2)
- Bead (2)
- Bildanalyse (2)
- Bildgebung (2)
- Broadband dielectric spectroscopy (2)
- Building Materials (2)
- Building materials (2)
- CALPHAD (2)
- CCMat (2)
- CCS (2)
- CLP (2)
- Calcium cobaltite (2)
- Carbon capture (2)
- Carbon dioxide (2)
- Catalysts (2)
- Characterization (2)
- Chemical composition (2)
- Chemically Complex Materials (2)
- Composite (2)
- Composites (2)
- Computertomographie (2)
- Confocal (2)
- Core-shell (2)
- Corrosion Testing (2)
- Corrosion inhibition (2)
- Crack (2)
- Crack Propagation (2)
- Crack growth velocity (2)
- Crack healing (2)
- Crack intensity factor (2)
- Creep-resistant steel (2)
- Crystal orientation (2)
- Cycloalyphatic epoxy oligosiloxane (2)
- Damage (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Data fusion (2)
- Dental materials (2)
- Deuterium (2)
- Digitalization (2)
- Double cantilever beam (2)
- Durability (2)
- ECHA (2)
- EDX (2)
- ESEM (2)
- Eigenspannungen (2)
- Einstufung (2)
- Electrocatalysis (2)
- Electrochemistry (2)
- Electron beam induced modification (2)
- Elemental composition (2)
- Emission (2)
- Emission test chamber (2)
- Encoding (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Exchange interaction (2)
- Explosionsschutz (2)
- Explosivstoffe (2)
- FEM (2)
- FIB (2)
- Faseroptik (2)
- FeNi-Oxide NPs (2)
- Ferromagnetism (2)
- Finite element method (2)
- Fire (2)
- Friction and wear (2)
- GMR (2)
- GMR-Sensorik (2)
- Gas-Staub-Gemische (2)
- Gel-type electrolytes (2)
- Geothermal (2)
- Glas (2)
- Gold nanocluster (2)
- Gold nanoparticles (2)
- Green chemistry (2)
- Grüneisen parameter (2)
- Hazardous substances (2)
- Henry's constant (2)
- High Pressure (2)
- High temperature corrosion (2)
- High-temperature corrosion (2)
- Hot stamping (2)
- Hybride Gemische (2)
- Hydrogen permeability (2)
- Hydrogen storage (2)
- IUCLID (2)
- Image analysis (2)
- Image processing (2)
- Imaging techniques (2)
- In situ heating (2)
- In-situ (2)
- InP (2)
- Inks (2)
- Integrating sphere spectroscopy (2)
- Interatomic potentials (2)
- Ionic Liquid crystals (2)
- Iron (2)
- L-PBF (2)
- LLG (2)
- LMD (2)
- LTCC (2)
- Landau Lifshitz equation (2)
- Laser beam melting (2)
- Laser beam welding (2)
- Laser metal deposition (2)
- Least-squares adjustment (2)
- Lichtbogensensorik (2)
- Lifetime (2)
- Load transfer (2)
- Low Cycle Fatigue (2)
- MMC (2)
- MOF (2)
- MSG-Engspaltschweißen (2)
- Machine Learning (2)
- Macrophages (2)
- Magnesium alloy (2)
- Magnetic moment (2)
- Magnetic nanoparticles (2)
- Metadata schema (2)
- Metal Matrix Composite (2)
- Metal matrix composite (2)
- Metal organic frameworks (2)
- Metals (2)
- Method (2)
- Micromagnetism (2)
- Microwave synthesis (2)
- Mikrobiell induzierte Korrosion (2)
- Modellierung (2)
- Molecularly imprinted polymers (2)
- Multielectrode array sensors (2)
- Multiplexing (2)
- NFDI (2)
- NIR (2)
- Nanomechanics (2)
- Nanosensor (2)
- Neutron (2)
- Neutron Diffraction (2)
- Non-classical crystallization (2)
- Normung (2)
- Numerical modeling (2)
- OOMMF (2)
- Oberflächenenergie (2)
- Object oriented micromagnetic framework (2)
- Online Process Monitoring (2)
- Ontologie (2)
- Ontology (2)
- Optics (2)
- Oxidglas (2)
- PBF-LB/M (2)
- Particle (2)
- Phonons (2)
- Photocatalysis (2)
- Plastic (2)
- Polycarbonate (2)
- Polymer 3R (2)
- Polymer bilayer coatings (2)
- Polypropylene (2)
- Porosity (2)
- Powder Bed Fusion (2)
- Precipitation (2)
- Process Monitoring (2)
- Protein (2)
- Proteins (2)
- Pyrotechnik (2)
- QHA (2)
- QY (2)
- Quantum yield (2)
- Quecksilberporosimetrie (2)
- REM (2)
- Radiotherapy (2)
- Referenzdaten (2)
- Reflectography (2)
- Reinheitsgradbestimmung (2)
- Resistance (2)
- Resonance frequency (2)
- Robotische Glasschmelzanlage (2)
- Roughness (2)
- SCNC (2)
- SEM/EDS (2)
- SIMS (2)
- SWIR (2)
- Scanning electrochemical microscope (SECM) (2)
- Selected Laser Melting (2)
- Semantic Web Technologies (2)
- Semiconductor (2)
- Sicherheitstechnische Kenngrößen (2)
- Silica (2)
- Single molecule (2)
- Single particle spectroscopy (2)
- Small-angle scattering (2)
- SnO2 (2)
- Stainless steels (2)
- Stickstoff (2)
- Stochastic Landau Lifshitz Gilbert equation (2)
- Structural Health Monitoring (2)
- Surface (2)
- Surface functionalization (2)
- Surface integrity (2)
- Synchrotron X-Ray Refraction (2)
- Synchrotron X-ray computed tomography (2)
- Syngle Crystal alloy (2)
- Temperature (2)
- Thermally induced porosity (2)
- Thermodynamik (2)
- Thermoelectric materials (2)
- Thermogravimetrie (2)
- Thin film metrology (2)
- Titanium (2)
- Tool wear (2)
- Topotactic transformation (2)
- Traceability (2)
- Transition metals (2)
- Tungsten carbide (WC) (2)
- Ultra-Thin films (2)
- Ultraschalltauchtechnik (2)
- Ultrashort laser processing (2)
- Ultrasonic-assisted milling (2)
- Ultrasound (2)
- VOC (2)
- Verbundfestigkeit (2)
- Vessels (2)
- Wasserstoff (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- Wood (2)
- X-ray computed tomography (2)
- XRF (2)
- Zeolitic imidazolate framework (2)
- ZfP (2)
- Zinc coatings (2)
- Zustandsüberwachung (2)
- beta particle (2)
- cylinders (2)
- 18HLT01 MetVes II (1)
- 29Si-27Al TRAPDOR MAS (1)
- 3D High-temperatue shape screening (1)
- 3D analysis (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D imaging (1)
- 3D printing (1)
- 3D tomography (1)
- 3D-Formerkennung (1)
- 5-hydroxynicotinic acid (1)
- 5G (1)
- AFM-IR (1)
- AISI 304L (1)
- ALD (atomic layer deposited) (1)
- ALD-Beschichtung (1)
- ALD-Hybridprozesse (1)
- AM IN718 (1)
- ASAXS (1)
- ASR (1)
- ATH (1)
- ATRP (1)
- Abkühlgeschwindigkeit (1)
- Absolute flourometry (1)
- Absorption edge (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acrylamide based polymers (1)
- Active pharmaceutical ingredient (API) (1)
- Additiv gefertigter Stahl (1)
- Additive Manufacture (1)
- Additive Fertigung (AM) (1)
- Additive surface treatment (1)
- Admixtures (1)
- Adsorbed layer (1)
- Advanced manufacturing (1)
- Advanced nanomaterials (1)
- Aerosole (1)
- Affinity chromatography (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag2S (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging (1)
- Aging mechanisms (1)
- Air Void System (1)
- Air exchange rate (1)
- Al alloy (1)
- Al-Cu-Li alloys (1)
- Al2O3 (1)
- Al2O3 thin films (1)
- Al2O3-Schichten (1)
- AlSi10Mg alloy (1)
- Albumin (1)
- Alcali activated binders (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkalialumosilicatsysteme (1)
- Alkaline earth metal (1)
- Aln (1)
- Altglasfragmente (1)
- Altpapierrecycling (1)
- Alumina (1)
- Aluminium Alloy (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Ammoniumnitrat (1)
- Amorphous silica particles (1)
- Amphiphilicity (1)
- Amplification (1)
- Anaerob (1)
- Analyser-based imaging (1)
- Analytical solution (1)
- Anisotropy (1)
- Annealing study (1)
- Anodic Aluminum Oxide (1)
- Anodization (1)
- Antibiotics (1)
- Antibodies (1)
- Antibody purification (1)
- Aromatic amino acid analysis AAAA (1)
- Artefact (1)
- Artificial digestion (1)
- Asphaltene content (1)
- Assays (1)
- Atmospheric Corrosion (1)
- Atmospheric Plasma Spraying (1)
- Atomic Force Microscopy (1)
- Atomic Layer Deposition (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Ausbildung (1)
- Austenitic stainless steels (1)
- Austenitic steel (1)
- Automatisation (1)
- Automatisierung (1)
- BADGER film (1)
- BBR (1)
- BCS (1)
- BLE (1)
- BSA (1)
- BTS (1)
- Bacterial growth (1)
- BadgerFilm (1)
- Baudenkmal (1)
- Baustahl (1)
- Baustoffe (1)
- Bauzustandsanalyse (1)
- Benannte Stelle (1)
- Bench braking sequence (1)
- Beratung Behörden/Ministerien (1)
- Beschichtung (1)
- Beta particle (1)
- Beton (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Betonschallplatte (1)
- Betonschäden (1)
- Bewitterung (1)
- Bexarotene (1)
- Bildverarbeitung (1)
- Bio Ceramics (1)
- Bio-SAXS (1)
- Bio-receptive (1)
- BioSAXS (1)
- Bioactive glass (1)
- Biocide (1)
- Biocides (1)
- Biocomposite (1)
- Biocorrosion (1)
- Biofilm cultivation (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilms (1)
- Bioimaging (1)
- Biomasseverbrennung (1)
- Biomimetics (1)
- Bioreceptivity (1)
- Bioresorbable (1)
- Blast injury (1)
- Bluetooth Low Energy (1)
- Boehmite alumina (1)
- Bonding Analysis (1)
- Bovine serum albumin (1)
- Bragg-edge (1)
- Brazing (1)
- Bremsbeläge (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Bronze (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Build Angle (1)
- Building products (1)
- Bulk diffusion (1)
- Bulk material (1)
- Bulk properties ageing (1)
- Burst pressure (1)
- Burst test (1)
- C-C coupling (1)
- CALPHAD databases analysis (1)
- CCUS (1)
- CEO (1)
- CERN (1)
- CFD (1)
- CMAS (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CMSX4 (1)
- CO2-Korrosion (1)
- CONSENS (1)
- CUSP (1)
- Calcium sulfoaluminate cement (1)
- Calculation (1)
- Camera (1)
- Capsules (1)
- Carbide (1)
- Carbon (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon nanomembranes (1)
- Carrier Gas Hot Extraction (1)
- Carrier gas hot extraction (1)
- CdSe (1)
- Cearmics (1)
- Cell imaging (1)
- Cement (1)
- Cement hydration (1)
- Ceramic (1)
- Ceramic spring (1)
- Ceramic-ceramc joints (1)
- Ceramics (1)
- Cermet (1)
- Certification (1)
- Certified reference material (1)
- Certified standards (1)
- Charakterisierung (1)
- Chemical Bonds (1)
- Chemical analyses (1)
- Chemical compositions (1)
- Chemically Complex Alloy (1)
- Cheminformatics (1)
- Chloride (1)
- Chromatography (HIC) (1)
- Chromium (1)
- Chromium (III) complexes (1)
- Chromium oxide (1)
- Chromstahl (1)
- Climate chamber simulation (1)
- Co-axial monitoring (1)
- CoCrMo (1)
- Coatings (1)
- Coda Wave Interferometry (1)
- Coherent Rayleigh OTDR (1)
- Cold Spray (1)
- Column chromatography (1)
- Columnar crystal growth (1)
- Columnar liquid crystals (1)
- Compatible solute (1)
- Complex concentrated alloy (CCA) (1)
- Component test (1)
- Composite cylinder (1)
- Composition (1)
- Compound (1)
- Compression (1)
- Compsite tapes (1)
- Configurational entropy (1)
- Confined Columnar Liquid Crystals (1)
- Confocal fluorescence microscopy (1)
- Conservation (1)
- Construction products (1)
- Consumer articles (1)
- Contact resonance (1)
- Conventional testing (1)
- Convolutional neural networks (1)
- Coordination polymer (1)
- Core-shell architecture (1)
- Core/shell materials (1)
- Corosion (1)
- Corrosion behaviour (1)
- Corrosion investigations (1)
- Corrosion loss (1)
- Corrosion product layer (1)
- Corrosion products (1)
- Corrosion protecting system (1)
- Cosolute (1)
- Crack evolution (1)
- Crack propagation (1)
- Crack propagation analysis (1)
- Cracks (1)
- Creep-resistant Steel (1)
- Crush (1)
- Cryo-TEM (1)
- Crystal Engineering (1)
- Crystal plasticity (1)
- Crystal structure (1)
- Crystalline structure (1)
- Curing Monitoring (1)
- Curvelet Transform (1)
- Cutting material (1)
- Cutting tool (1)
- Cutting tools (1)
- Cyclic R-curve (1)
- DED-L (1)
- DIC assisted compression (1)
- DIN 52186 (1)
- DIN EN 252 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DRIFTS (1)
- DSR (1)
- Damage Analysis (1)
- Damage mechanism (1)
- Damage repair (1)
- Dangerous goods packaging (1)
- Dangerous goods packagings (1)
- Dark-field transmission electron microscopy (1)
- Data (1)
- Data Fusion (1)
- Data Interoperability (1)
- Data Science (1)
- Data analysis (1)
- Databases (1)
- Datenanalyse (1)
- Datenträger (1)
- Deep Learning (1)
- Defect detection (1)
- Defects (1)
- Deformation (1)
- Deformationen (1)
- Degradation of Mechanical Properties (1)
- Degree of damage (1)
- Degree of purity (1)
- Delamination (1)
- Dendrimersomes (1)
- Dendritic amphiphiles (1)
- Density (1)
- Density Functional Theory (1)
- Dental material (1)
- Depth-profiling (1)
- Design Fire (1)
- Destabilization (1)
- Detection (1)
- Dielectric Spectroscopy (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusion (1)
- Diffusion Coefficient (1)
- Diffusion barrier (1)
- Digital material representation (1)
- Digital twin (1)
- Digitaler Zwilling (1)
- Diopside (1)
- Direct fluorine-metal bond (1)
- Direct laser writing (1)
- Discotic Liquid Crystal (1)
- Discotic liquid crystals (1)
- Dislocations (1)
- Distortion (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed vibration sensing (1)
- Distribution during filling (1)
- Disäuren (1)
- Doping study (1)
- Downstream processing (1)
- Dredging mud (1)
- Drop test (1)
- Druckwelle (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Dust analysis (1)
- Dynamic light scattering (1)
- Dynamics (1)
- EBSD analysis (1)
- EC4SafeNano (1)
- EDS (1)
- EDX Analysis (1)
- EDXRD (1)
- EMN (1)
- EMPIR project (1)
- EPMA (1)
- ESI-TOF-MS (1)
- EU H2020 project (1)
- Ectoin (1)
- Ectoine (1)
- Eddy Current (1)
- Edelstahl (1)
- Eigenspannung (1)
- Eindringmodul (1)
- Einkristalllegierung (1)
- Einzelfaserdurchzugsversuch (1)
- Eisen (1)
- Elastomer (1)
- Elastomers (1)
- Electro catalyst (1)
- Electrochemical noise (1)
- Electrodeposited Ni - coatings (1)
- Electrolysis (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron beam (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (EPMA) (1)
- Electrospinning (1)
- Elektrochemische Charakterisierung (1)
- Elevated Temperatures (1)
- Elevated temperatures (1)
- Ellipsometric metrology (1)
- Emission chamber testing (1)
- Energetic materials (1)
- Energietechnik (1)
- Energy (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy input (1)
- Engineered Nanomaterials (1)
- Environment (1)
- Epox (1)
- Epoxy nanocomposite (1)
- Er(III) (1)
- Erneuerbare Energien (1)
- Erosion (1)
- European Metrology Network (1)
- European standard (1)
- Exciton diffusion (1)
- Experimental study (1)
- Extracellular polymeric substances (1)
- Extracellular vesicles (EV) (1)
- Extrusion (1)
- FE (1)
- FIB/SEM (1)
- FNCT (1)
- FTIR spectroscopy (1)
- Fachwerkträger (1)
- Fallhammer (1)
- Far-infrared spectroscopy (1)
- Farbätzen (1)
- Fasermodifikation (1)
- Fatigue Crack Growth (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Façade (1)
- Fe-Cr alloys (1)
- Fe-Ni (1)
- Fe2TiO5 (1)
- FeCr- alloys (1)
- FeNi (1)
- FeNi thin film (1)
- FeSnOx (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferroelektret (1)
- Fiber (1)
- Fiber reinforced dental post (1)
- Fiber sensors (1)
- Fiber-optic microarray (1)
- Fiberglass composite (1)
- Film depositition (1)
- Film thickness determination (1)
- Finite Element Method (1)
- Finite Element Modelling (1)
- Fire Retardant (1)
- Flow Cell (1)
- Flow-System (1)
- Fluorescence quenching (1)
- Fluorescence spectroscopy (1)
- Fluorescent dyes (1)
- Fluorescent polymer optical fibres (1)
- Fluoride (1)
- Fluorides (1)
- Fluorine Interaction (1)
- Flüssigmetallversprödung (1)
- Foam tiles (1)
- Focussed ion beam growth (1)
- Force distance curves (1)
- Formaldehyde (1)
- Foundation (1)
- Fractional factorial (1)
- Fractography (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fragmentation (1)
- Fraktografie (1)
- Fraktographie (1)
- Fre (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fullerene (1)
- Functional group detection (1)
- Functionality type distribution (1)
- Funktionelle Beschichtungen (1)
- Funtional Groups (1)
- Füllgradregelung (1)
- G5P (1)
- GD-OES (1)
- GEXRF (1)
- GUM-compliance (1)
- GVP (1)
- Gamma-Co60 radiation (1)
- Gamma-irradiation (1)
- Gas Sorption (1)
- Gas solubility (1)
- Gas turbine (1)
- Gefüge (1)
- Gel electrolytes (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Generator (1)
- Geopolymer (1)
- Geopolymers (1)
- Geothermal energy (1)
- Geothermie (1)
- Ggraphene polymer nanocomposite (1)
- GlasDigital (1)
- Glasanalyse (1)
- Glasig-kristalline Sinterwerkstoffe (1)
- Glaskeramik (1)
- Glass paints (1)
- Glass transformation temperature (1)
- Glass transition (1)
- Glass-ceramic (1)
- Glasstruktur (1)
- Gleeble (1)
- Gleitlinien (1)
- Glue (1)
- Glutaraldehyde (1)
- Glycerin (1)
- Gold (1)
- Gold Nanoparticle (1)
- Gold mosaics (1)
- Grain boundary corrosion (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Grazing exit (1)
- Grenzflächenaktive Verbindung (1)
- Grey cast iron machining (1)
- Growth Kinetics (1)
- Guideline (1)
- HDPE Sorption (1)
- HF (1)
- HR-CS-AAS (1)
- HV cable accessories (1)
- HV-Insulation (1)
- Haftfestigkeit (1)
- Haftvermittler (1)
- Halbleiterphysik (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Harsh environments (1)
- Hatch length (1)
- Hauptkomponentenanalyse (1)
- Hazmat (1)
- Heat Treatment (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heißzug (1)
- Helium- und Wasserstoffpermeation (1)
- Heterogene plastische Deformation (1)
- Hexafluorobenzen (1)
- HfO2 (1)
- High Cycle Fatigue (1)
- High Molecular Polyethylene (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High resolution ultrasonic testing (1)
- High temperature (1)
- High temperature corrosion resistance (1)
- High voltage cable accessories (1)
- High-Performance Concrete (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-strength steels (1)
- High-temperature stability (1)
- Historic buildings (1)
- Hochfester Feinkornbaustahl (1)
- Hochtemperaturanwendungen (1)
- Hollow specimen (1)
- Holz (1)
- Holzbaustoff (1)
- Holzprüfung (1)
- Homemade explosives (1)
- Honeycomb structure (1)
- Horizontaldilatometer (1)
- Human plasma (1)
- Humidity (1)
- Hybrid inorganic/organic copolymers (1)
- Hydration (1)
- Hydrogen diffusion (1)
- Hydrogen permeation (1)
- Hydrophobic interaction (1)
- Hydrothermal treatment (1)
- Hydroxyectoine (1)
- Härtevergleichsplatten (1)
- Härteverlauf Schweißnaht (1)
- IN 625 (1)
- IN 718 (1)
- IN718 (1)
- IR (1)
- IR spectroscopy (1)
- ISO 5725 (1)
- Illumina (1)
- ImAFM (1)
- Image Denoising (1)
- Image segmentation (1)
- Immersion tank testing (1)
- Impact excitation (1)
- Impact strength (1)
- Implant-Test (1)
- In situ Raman (1)
- In situ XRD (1)
- In situ analysis (1)
- In situ diffraction (1)
- In situ measurement (1)
- In situ measurement, (1)
- In situ tensile test (1)
- In situ testing (1)
- In-Situ (1)
- In-Situ Characterization (1)
- In-situ Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ loading (1)
- In-situ monitoring (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 718 (1)
- Indoor air (1)
- Industrieabwasseraufbereitung (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Initial hydration (1)
- Innovative Messtechnik (1)
- Inorganic polymers (1)
- Instrumented indentation testing (1)
- Instrumentierte Eindringprüfung (1)
- Integrated analysis (1)
- Interface (1)
- Interim storage (1)
- Interlaboratory comparison (1)
- Intermediate (1)
- Internal friction (1)
- Internal oxidation (1)
- Interpenetrating polymer network (1)
- Interphase (1)
- Invasive Arten (1)
- Inverse Analysis (1)
- Inverse analysis (1)
- Inverse problem (1)
- Ionic liquids (1)
- Ionizing radiation damage (1)
- Iridium oxide films (1)
- Iridium-titanium mixed oxides (1)
- Iron aluminides (1)
- Iron oxide (1)
- Isotope analysis (1)
- JNP AdvManuNet (1)
- Kalottenverfahren (1)
- Kaltrissprüfung (1)
- Kavitation (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Keramik (1)
- Kiefernholz (1)
- Kieselsäure (1)
- Klebfestigkeit (1)
- Kleidermotte (1)
- Knoevenagel (1)
- Knoevenagel condensation (1)
- Knowledge Readiness Level (1)
- Knowledge Representation (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konformitötsbewertung (1)
- Kontrastierung (1)
- Korrosionsabtrag (1)
- Kraftabhängige Funktion (1)
- Kristallplastizität (1)
- Künstliche neuronale Netze (1)
- L-PBF 316L (1)
- LBM (1)
- LIBS TIG welding (1)
- LIPSS (1)
- LPBF (1)
- LPSO (1)
- LTCC multilayer (1)
- Laboratory Container (1)
- Laboratory method (1)
- Laborvergleich Härte (1)
- Lanthanide(III) (1)
- Large scale test (1)
- Large-scale production (1)
- Large-scale synthesis (1)
- Large-scale test (1)
- Laser Cladding (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser ablation (1)
- Laser cludding (1)
- Laser dispersing (1)
- Laser structuring (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strcutures, LIPSS (1)
- Laserthermografie (1)
- Lasertriangulationssensor (1)
- Latex (1)
- Lattice structure (1)
- Layer-by-layer deposition (1)
- Leaching process (1)
- Least-Squares Adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lichtmikroskopie (1)
- Ligand (1)
- Ligands (1)
- Lightweight structures (1)
- Lignin (1)
- Lignosulfonate (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Lithium Ion Batteries (1)
- Lithium batteries (1)
- Lithium-ion batteries (1)
- Lizard (1)
- Load Partition (1)
- Load history (1)
- Loading factor (1)
- Localized corrosion (1)
- Lokale Korrosion (1)
- Long-term monitoring (1)
- Longitudinal Wave (1)
- Low cycle fatigue (1)
- Lubricants (1)
- Luftultraschall (1)
- Luminescence lifetime measurments (1)
- Luminescent materials (1)
- MIC projekt (1)
- MID IR Spectroscopy (1)
- ML (1)
- Machine-Learning Segmentation (1)
- Magic-sized cluster (1)
- Magnesium (1)
- Magnetic nano-particles (1)
- Magnetic stray fields (1)
- Magnetostrictive actuator layer (1)
- Magnetostrictive layer (1)
- Magnetron sputtering (1)
- Manganese oxide (1)
- Maritime atmosphere (1)
- Martensitische nichtrostende Stähle (1)
- Maschinennachgiebigkeit (1)
- Material characterization (1)
- Material degradation (1)
- Material design (1)
- Material model (1)
- Material oxidation (1)
- Material selection (1)
- McSAS3 (1)
- Me-TiO2 (1)
- Measurement uncertainty (1)
- Mechanical Behavior (1)
- Mechanical strength (1)
- Mechanichal behaviour (1)
- Mechanische Kennwertermittlung (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical syntheses (1)
- Mechanochemie (1)
- Median lethal energy deposit (1)
- Medieval glasses (1)
- Medieval stained glass (1)
- Mehr-Proben-Kleben (MSB) (1)
- Mehr-Proben-Prüfen (CAT) (1)
- Melt Flow Rate (MFR) (1)
- Melt pool behaviour (1)
- Melting (1)
- Mesoporous (1)
- Mesoporous materials (1)
- Mesoporous thin films (1)
- Messunsicherheit (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metal reducing bacteria (1)
- Metal seal (1)
- Metallsulfide (1)
- Metallurgie (1)
- Methodenvalidierung (1)
- Micro computed tomography (1)
- Micro-XRF (1)
- Micro-heterogeneity (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological investigation (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microfluidic (1)
- Micromanipulation (1)
- Micromixer (1)
- Microparticles (1)
- Micropatterned dry adhesive (1)
- Microplastics sampling (1)
- Microprinting (1)
- Microstructure analysis (1)
- Microstructure-property relations (1)
- Mikro-CT (1)
- Mikrobiell beeinflusste Korrosion (1)
- Mikrostruktur (1)
- Mineralogie (1)
- Missbräuchliche Verwendung in Stadien (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model alloy (1)
- Model and measurement based analysis (1)
- Modeling (1)
- Moisture (1)
- Moisture drying (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular dynamic simulation (1)
- Monte-Carlo simulations (1)
- Morpho-chemical characterization (1)
- Multi-method Metrology (1)
- Multi-sample analysis (1)
- Multielectrode (1)
- Multiphoton Lithography (1)
- Multiple ageing and rejuvenation (1)
- Multiplexing sensory fiber-optic microarrays (1)
- NDT Monitoring (1)
- NFDI-MatWerk (1)
- Nano-landscape (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nanofiller (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticel based pH-probes (1)
- Nanophysik (1)
- Nanoporous media (1)
- Nanorisk (1)
- Nanosafety (1)
- Nanosensors (1)
- Nanostructures (1)
- Natural rubber (1)
- Nd-sensitizer (1)
- Nd3+ (1)
- Neintron diffraction (1)
- Neozoon (1)
- Netron diffraction (1)
- Network Communication (1)
- Neutronbeugungsverfahren (1)
- Neutronen (1)
- Neutronendiffraktion (1)
- Neutronenradiographie (1)
- Ni-base superalloy (1)
- Ni-based alloy (1)
- Nickel based alloy (1)
- Nickelbasislegierungen (1)
- Niobium carbide (1)
- Niobium carbide powder (1)
- Nitrogen (1)
- Non destructive testing (1)
- Non-classical crystallization theory (1)
- Non-destructive testing (1)
- Normalbeton (1)
- Novel equipment (1)
- Nuclear Magnetic Resonance (1)
- Numerical Modeling (1)
- Numerical modelling (1)
- Numerische Simulation (1)
- OH Radical (1)
- OH radical scavenger (1)
- OH radicals (1)
- Oberflächenfunktionalisierung (1)
- Oberflächenkeimbildung (1)
- Offshore (1)
- One-part formulation (1)
- Online NMR Spectroscopy (1)
- Open data (1)
- Open science (1)
- Optical Assays (1)
- Optical Emission Spectroscopy (1)
- Optical Tomography (1)
- Optical connector (1)
- Optical criterion (1)
- Optical layer model (1)
- Optical properties (1)
- Optoelektronik (1)
- Orientation-dependent microstructure (1)
- Orientierung (1)
- Osmolyte (1)
- Overlay (1)
- Oxide Glasses (1)
- Oxygen reduction reaction (1)
- P25 (1)
- P92 (1)
- PAEK (1)
- PDMS (1)
- PEG (1)
- PH (1)
- PIM-1 (1)
- PMD Core Ontology (1)
- PMDco (1)
- POD (1)
- POSS (1)
- PU Learning (1)
- PVD /ECD process (1)
- Pair Distribution Functions (1)
- Pair distribution function analysis (1)
- Paracetamol (1)
- Partial discharge detection (1)
- Partial penetration (1)
- Particle Synthesis (1)
- Particle measurement (1)
- Particle scattering (1)
- Particle scattering simulations (1)
- Particle size (1)
- Particle size distribution (1)
- Particle size distributuion (1)
- Particle synthesis (1)
- Paste (1)
- Peem (1)
- Permeability (1)
- Permeation (1)
- Perovskite (1)
- Pharmaceuticals (1)
- Phase composition (1)
- Phasenzusammensetzung (1)
- Phosphate (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorus (1)
- Photocuring (1)
- Photoluminescence (1)
- Photoresist (1)
- Photovoltaic (1)
- Phthalocyanine (1)
- Piezopolarisation (1)
- Pipeline (1)
- Plattform MaterialDigital (1)
- Politikberatung (1)
- Pollen (1)
- Polyacrylamide (1)
- Polyamid 12 (1)
- Polyaniline (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polyethylene, PE-HD (1)
- Polyglycerol (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer coating (1)
- Polymer nanocomposites (1)
- Polymer optical fibers (1)
- Polymer optical fibre (1)
- Polymer-Ceramic-Composite (1)
- Polymeric membrane (1)
- Polymers of intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore orientation (1)
- Pores (1)
- Porosity growth (1)
- Porosität (1)
- Porous Materials (1)
- Porous materials (1)
- Portland cement (1)
- Position detection (1)
- Poster presentation (1)
- Postfluorination (1)
- Powder X-ray diffraction (1)
- Powder method (1)
- Preferred orientation (1)
- Pressure loading (1)
- Pressure tanks (1)
- Pressure wave (1)
- Primäre Explosionswirkug (1)
- Probenpräparation (1)
- Process Control (1)
- Processing (1)
- Propagation modes (1)
- Property simulation (1)
- Protective glazing (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein unfolding (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Proximatanalyse (1)
- Prozessmonitoring (1)
- Prozessregelung (1)
- Präparation (1)
- Prüfmethoden (1)
- Prüfrichtlinie (1)
- Pulse reflection (1)
- Pulse shape analysis (1)
- Pulvermethode (1)
- QD (1)
- QSPR (1)
- Quality control (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantum Chemistry (1)
- Quantum Dot-Rod (1)
- Quantum Yield (1)
- Quartz Crystal Microbalance QCM (1)
- Quasi-distributed sensing (1)
- Quenching and partitioning (1)
- Qulitätssicherung (1)
- RAFT (1)
- ROS (1)
- Radar (1)
- Radical Scavenger (1)
- Radical scavenger (1)
- Radicals (1)
- Radiografie (1)
- Radiological inspections (1)
- Raman spectroscopy (1)
- Rare earth nanoparticles (1)
- Ratiometric Sensors (1)
- Ratiometric sensors (1)
- Rauheit (1)
- Rayleigh scattering (1)
- Recycling (1)
- Reduction 4-nitrophenol (1)
- Reduction of agglomerates (1)
- Reductive amination (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference materials (1)
- Reference nanomaterials (1)
- Reference particles (1)
- Reference procedures (1)
- Reference product (1)
- Reference samples (1)
- Registrierungsdossiers (1)
- Reinforcing Bar (1)
- Reliable characterization (1)
- Repair (1)
- Reproducibility (1)
- Research Data Management (1)
- Research data management (1)
- Residual stress measurements (1)
- Residual stress state (1)
- Residual stresses (1)
- Resonance (1)
- Resonanz (1)
- Reverse-time migration (1)
- Rice husk ash (1)
- Rigid amorphous fraction (1)
- Ringversuche (1)
- Risse (1)
- Rissprüfung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Round robin (1)
- Round robin test (1)
- Rubber (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- S-phase (1)
- SALSA (1)
- SDS-PAGE (1)
- SEM analysis (1)
- SEP 1927 (1)
- SIEF (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Safe-by-Design (1)
- Safer by design (1)
- Salt melt (1)
- Sandblasting (1)
- Sandsteine (1)
- Sandstone (1)
- Sandstorm (1)
- Sanger sequencing (1)
- Sapphire (1)
- Sc-ICP-ToF-MS (1)
- Scaffold (1)
- Scale-bridging (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering (1)
- Schichtdicken (1)
- Schichtherstellung (1)
- Schichttestung (1)
- Schutzverglasung (1)
- Schwefelgehalt (1)
- Schweißdatenmanagement (1)
- Schweißnähte (1)
- Schwindungsinhomogenitäten (1)
- Schwindungsverhalten (1)
- Scientific software (1)
- Sea Water (1)
- Seenotrettungsmittel (1)
- Selbstreinigung (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser curing (1)
- Self-assembly (1)
- Self-healing silicone rubber (1)
- Self-powdering (1)
- Self-reactive substances (1)
- Semantic Interoperability (1)
- Semi-metallic friction material (1)
- Sende-Empfangs Prüfkopf (1)
- Sequential learning (1)
- Service life (1)
- Service life model (1)
- Shape (1)
- Shell (1)
- Short chained phthalates (1)
- Shortwave infrared (1)
- Si wafer filter (1)
- Si-Ge (1)
- SiGe (1)
- SiO2 (1)
- Silica Nanoparticles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicone rubber (1)
- Silver (1)
- Silver nanoparticle (1)
- Simvastatin (1)
- Single cell analysis (1)
- Single crystal X-ray diffraction (1)
- Single cystal (1)
- Single-stranded DNA-binding proteins (1)
- Size and size distribution (1)
- Size effect (1)
- Size-exclusion chromatography (SEC) (1)
- Sliding performances (1)
- Slow Strain Rate Testing (1)
- Slow crack growth (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-angle X-ray scattering (1)
- Small-angle x-ray scattering (1)
- Small-angle xray scattering (1)
- Smart materials (1)
- Smouldering (1)
- Sodiumborosilicate glasses (1)
- Software (1)
- Soil (1)
- Soil-structure interaction (1)
- Solar Cell (1)
- Solarenergie (1)
- Solid-State-Reaction (1)
- Solution doping (1)
- Sorption (1)
- Spectral multiplexing (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopy (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Spinel (1)
- Spontane Polarisation (1)
- Spray drying (1)
- Sprengplattieren (1)
- Spring constant (1)
- Spruce (1)
- Stabilization of HT-structures at room temperature (1)
- Stabilizer (1)
- Stable suspensions (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless Steel (1)
- Stainless Steels (1)
- Standard (1)
- Standardisation (1)
- Standardization (1)
- Standardization of Ellipsometry (1)
- Starch (1)
- Starch nanoparticle (1)
- Strain sensors (1)
- Stress cracking resistance (1)
- Strontiumfluoride (1)
- Structural color (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Subgrain structure (1)
- Submerged arc welding (1)
- Substrate effect (1)
- Sulfiding (1)
- Sulfur (1)
- Superalloy (1)
- Superconducting (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Superplasticizer (1)
- Superplasticizers (1)
- Surface Chemical Transformation (1)
- Surface Energy (1)
- Surface Plasmon Resonance (1)
- Surface analysis (1)
- Surface characterization (1)
- Surface crystallization (1)
- Surface energy (1)
- Surface functionalities (1)
- Surface group analysis (1)
- Surface modification (1)
- Surface morphology (1)
- Surface structuring (1)
- Surface texturing (1)
- Sustainability (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron Tomography (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron XRD (1)
- Synchrotron radiation (1)
- Synchrotron refraction radiography (1)
- Synthesizability (1)
- Synthetic air (1)
- TATP (1)
- TBC (1)
- TED-GC-MS (1)
- TED-GC/MS (1)
- TEKKEN-Test (1)
- TEM Image (1)
- TGA-FTIR (1)
- THz and mid IR spectroscopy (1)
- THz spectroscopy (1)
- TIG-welding (1)
- TKD (1)
- TMDSC (1)
- TMF (1)
- TRIP (1)
- TRIS (1)
- Talbot-Lau interferomerty (1)
- Talbot-Lau interferometry (1)
- Tankdesign (1)
- Tauchwägung (1)
- Technical Lignin (1)
- Temeprature scaling (1)
- Temperature dependence (1)
- Temperature scaling (1)
- Tensile (1)
- Tensile Properties (1)
- Tensile test (1)
- Terahertz Tomography synthetic aperture (1)
- Terahertz synthetic aperture dielectric materials (1)
- Termites (1)
- Ternary quantum dot (1)
- Test method (1)
- Test methods validation (1)
- Test procedure (1)
- Testing (1)
- Textile fibres (1)
- Texture (1)
- Themal Transitions (1)
- Thermal Spray (1)
- Thermal arrier coatings (1)
- Thermal barrier coatings (1)
- Thermal cycling (1)
- Thermal decomposition (1)
- Thermal treatment (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermografie (1)
- Thermomagnetic material (1)
- Thermomechanics (1)
- Thermoplastic Polyurethane (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thickness (1)
- Thin Films; (1)
- Thin polymer films (1)
- Ti6Al4V alloy (1)
- TiO2 nanoparticle (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Titania nanoparticles (1)
- Titanium Dioxide (1)
- Titanium nitride (1)
- Titanium-di-boride (1)
- Titration (1)
- Tomographie (1)
- Tomography (1)
- Tool steel (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topografie (1)
- Topography (1)
- Topometry (1)
- Torsional fatigue (1)
- Total scattering analysis (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transport mechanism (1)
- Tribological behavior (1)
- Tribologie (1)
- Trinkwasser (1)
- Tunnel (1)
- Two photon polymerisation (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Type III composite pressure receptacles (1)
- Tyrosine (1)
- UCNP (1)
- UCST polymers (1)
- UCST-type polymer (1)
- UPLC (1)
- UV Weathering (1)
- UV-irradiation (1)
- Ultra sound (1)
- Ultrafast laser processing (1)
- Ultraschall (1)
- Ultrasonic (1)
- Ultrasonic Transducer (1)
- Ultrasonic assisted milling (1)
- Ultrasonic echo technique (1)
- Uncertainty (1)
- Uncertainty budgets (1)
- UpConversion (1)
- Upconversion nanoparticles (1)
- Upconverting nanoparticles (1)
- VM12 SHC (1)
- Vacuum (1)
- Vacuum hot extraction (1)
- Vakuumheißextraktion (1)
- Validation (1)
- Verbundwerkstoffe (1)
- Vereinfachtes Verfahren (1)
- Vergleichsstahlproben (1)
- Vernetzte Produktion (1)
- Verzinkungen (1)
- Videoskopie (1)
- Virtual experiments (1)
- Vitual computer tomography simulation (1)
- Volatile organic compounds (1)
- WIG-Blindschweißnaht (1)
- Waiting time (1)
- Wasseraufbereitung (1)
- Wasserstoffpermeation (1)
- Waste heat recovery (1)
- Water/alcohol mixtures (1)
- Wave propagation (1)
- Weld Joint (1)
- Wellenprüfung (1)
- White light interference microscopy(WLIM) (1)
- Widerstandpunktschweißen (1)
- Windkanal (1)
- Wood preservation (1)
- Workflow (1)
- X-Ray Diffraction (1)
- X-ray Computed Tomography (1)
- X-ray Diffraction (1)
- X-ray computer tomography (1)
- X-ray diffractometry (1)
- X-ray imaging (1)
- X-ray interferometry (1)
- X-ray scattering (1)
- X-ry Diffraction (1)
- XAS (1)
- Yb(III) (1)
- Yellowing (1)
- Young's modulus (1)
- Young´s modulus (1)
- Zahnmedizin (1)
- Zelluläres Polypropylen (1)
- Zement (1)
- Zementgebundene Baustoffe (1)
- Zentrifugentechnologie (1)
- Zeolite (1)
- Zersetzungsgasanalyse (1)
- Zerstörungsfreie Prüfung (1)
- Zinc and galvanized samples (1)
- Zirconium (1)
- ZnSe (1)
- Zonation (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zünder (1)
- additive manufacturing (1)
- aggregation-induced dual emission (AIDE) (1)
- bioimaging (1)
- burst test (1)
- cocrystal (1)
- creep behaviour (1)
- dangerous goods packagings (1)
- excess isotherms (1)
- excitation power density (1)
- extreme temperature (1)
- gas adsorption (1)
- gas solubility (1)
- high-resolution camera (1)
- hybrid repair (1)
- ionic liquids (1)
- life cycle test (1)
- low energy electrons (1)
- mechanochemistry (1)
- milling (1)
- pH probe (1)
- pH sensing (1)
- polyethylene terephthalate (1)
- porous solids (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- ssDNA (1)
- stress cracking resistance (1)
- test methods (1)
- µ-XRF (1)
- µCT (1)
- Örtliche Korrosion (1)
- β-cristobalite structure type (1)
Organisationseinheit der BAM
- 6 Materialchemie (196)
- 5 Werkstofftechnik (93)
- 8 Zerstörungsfreie Prüfung (89)
- 6.3 Strukturanalytik (65)
- 8.5 Röntgenbildgebung (60)
- 9 Komponentensicherheit (52)
- 6.6 Physik und chemische Analytik der Polymere (51)
- 1 Analytische Chemie; Referenzmaterialien (43)
- 6.1 Oberflächen- und Dünnschichtanalyse (39)
- 4 Material und Umwelt (36)
The understanding of process-microstructure-property-performance (PMPP) relationships in additive manufacturing (AM) of metals is highly necessary to achieve wide-spread industrial application and replace conventionally manufactured parts, especially regarding safety-relevant applications. To achieve this understanding, reliable data and knowledge regarding material’s microstructure-property relationships (e.g. the role of defects) is needed, since it represents the base for future more targeted process optimizations and more reliable calculations of performance. However, producing reliable material data and assessing the AM material behaviour is not an easy task: big challenges are e.g. the actual lack of standard testing methods for AM materials and the occasional difficulties in finding one-to-one comparable material data for the conventional counterpart.
This work aims to contribute to end this lack of reliable material data and knowledge for the low cycle fatigue behaviour of the most used titanium alloy in aerospace applications (Ti-6Al-4V). For this purpose, two sets of test specimens were investigated. The first set was manufactured from cylindrical rods produced by an optimized DED-L process and the second was manufactured from a hot formed round bar. The test specimens were cyclically loaded until failure in the low-cycle-fatigue (LCF) regime. The tests were carried out according to ISO 12106 between 0.3 to 1.0 % axial strain amplitude from room temperature up to 400°C. The LCF behaviour is described and compared between materials and with literature values based on cyclic deformation curves and strain-based fatigue life curves. Besides, the parameters of Manson-Coffin-Basquin relationship were calculated. The microstructures (initial and after failure) and fracture surfaces were comparative characterized. Thereby, the focus lied on understanding the role of grain morphology and defects on the failure mechanisms and fatigue lifetimes. For this latter characterization, optical microscopy (OM), scanning electron microscopy (SEM) and micro computed tomography (µCT) were used.
Reference datasets in the MSE domain represent specific material properties, e.g., structural, mechanical, … characteristics. A reference dataset must fulfill high-quality standards, not only in precision of measurement but also in a comprehensive documentation of material, processing, and testing history (metadata). This Infrastructure Use Case (IUC) of the consortium Materials Science and Engineering (MatWerk) of National Research Data Infrastructure (NFDI) aims to develop, together with BAM and other Participant Projects (PP), a framework for generating reference material datasets using creep data of a single crystal Ni-based superalloy as a best practice example. In a community-driven process, we aim to encourage the discussion and establish a framework for identifying reference material datasets. In this poster presentation, we highlight our current vision and activities and intend to stimulate the discussion about the topic reference datasets and future collaborations and work.
In our current view, reference datasets in the MSE domain represent specific material properties, e.g., structural, mechanical, … characteristics. A reference dataset must fulfill high-quality standards, not only in precision of measurement but also in a comprehensive documentation of material, processing, and testing history (metadata). This Infrastructure Use Case (IUC) aims to develop a framework for generating reference material datasets using creep data of a single crystal Ni-based superalloy as a best practice example. In a community-driven process, we aim to encourage the discussion and establish a framework for the creation and distribution of reference material datasets. In this poster presentation, we highlight our current vision and activities and intend to stimulate the discussion about the topic reference datasets and future collaborations and work.
Alkali-silica reaction (ASR) is a serious Problem concerning the deterioration of concrete. This leads to significant maintenance and reconstruction costs for concrete infrastructures all over the world. The geographical regions, which play a major role in concrete deterioration, are for example coastal Areas or in general, areas with a high air humidity/salinity due to closeness of rivers or lakes.
These exemplary results show, the application of Raman spectroscopy establishes a valuable approach for characterizing the chemical and structural composition of ASR-products. The results prove the potential to trace the kind of reaction products, developing in dependence on the aggregate and to follow up its local alteration from origin of the gel.
Mechanical properties of metals and their alloys are strongly governed by their microstructure. The nanometer-sized precipitates in hardenable wrought aluminium alloys, which can be controlled by heat treatment, act as obstacles to dislocation movement within the material and are critical to the mechanical performance of the component, in this case a radial compressor wheel of a ships’ engine. TEM-based image analysis is essential for the study to investigate the microstructural changes (precipitation coarsening) that occur as a result of ageing at elevated temperatures.
In the maritime context of offshore operation, corrosion, in combination with the materials used, poses a particular challenge to ensure safe operation over long indefinite periods and to minimise susceptibility to failure. Until today, only a few corrosion protection systems have proven themselves for the interaction of efficiency, installation, and maintenance in the offshore sector. In addition, available corrosion test methods sometimes have major deficits about conclusions of the durability. Therefore, there is more research and development needed.
The flagship project H2Mare of the Federal Ministry of Education and Research aims to enable the production of green hydrogen and PtX products at high seas. Research is being driven forward by the partners in four individual projects, where BAM is involved in two.
In PtX-Wind, major kinds of corrosion attacks at offshore constructions are characterized and investigated, and suitable corrosion protection measures determined. In TransferWind, attention focusses on transferring scientific results into standardization.
This poster at the H2Mare Conference 2023 presents an overview of the investigation methods and contribution of the department “Corrosion and Corrosion Protection”.
In this joint project, standardized measurement methods for hybrid
mixtures are developed, which serve to determine safety
characteristics for explosion protection.
A hybrid mixture is a multi-phase System consisting of fuel gas or
vapor, as well as air and flammable dust. This combination can occur
for instance in drying processes or during heterogenous reaction
processes.
The subsurface residual stress in laser powder bed fused 316L structures was analyzed using X-ray diffraction (XRD) and layer removal. The influence of varying structure thicknesses was investigated. In this study the importance of combining surface roughness measurements with XRD was shown. Moreover, a clear relation between the structure thickness and the subsurface residual stress profiles was observed.
Polymeric membranes represent a low-cost, energy efficient solution for gas separation. Recently polymers of intrinsic microporosity (PIMs) have emerged as prestigious membrane materials featuring a large concentration of pores smaller than 1 nm, a BET surface area larger than 700 m2/g and high gas permeability and selectivity. Unusual chain structure combining rigid segments with sites of contortion gives rise to the intrinsic microporosity. However, this novel class of glassy polymers are prone to pronounced physical aging. The initial microporous structures approach a denser state via local small scale fluctuataions, leading to a dramatic reduction in the gas permeabilities. For the first time, dielectric relaxation spectroscopy with state-of-the-art high-resolution analyzers was employed to investigate three representative PIMs with a systematic change in chain rigidity: PIM-EA-TB 〉 PIM-1 〉 PIM-MDPH-TB. The molecular mobility, the charge transport and their response upon heating (aging) in the polymers were measured in a broad temperature range through isothermal frequency scans during different heating / cooling cycles. Multiple dielectric processes following Arrhenius behavior were observed for the investigated polymers. Local fluctuations, Maxwell-Wagner-Sillars (MWS) polarization and structural relaxation phenomena were discussed and attempted to be correlated with the structural features of PIMs. Moreover, all PIMs showed conductivity in the glassy state. The significant increase in the conductivity with increasing temperature far below the glass transition temperature of PIMs is explained in terms of the loosely packed microporous structure and the formation of local intermolecular agglomerates due to interaction of π-electrons in aromatic moieties of the polymer backbone.
Due to their chemical structure, a rigid disk-like aromatic core and flexible alkyl chains attached to the core, discotic liquid crystals (DLCs) can organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropicphase. The overlap of the π orbitals of the aromatic core in the hexagonal columnar mesophase leads to a high charge-carrier mobilitie along the column axis – these columns can be considered as “moleculer nanowires” making liquid crystals a promising class of materials for electronic applications. Previous studies on DLCs showed that the phase behavior of DLCs is susceptible to nano confinement. Here in this study, the thermotropic collective orientational order of 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, and the effects of nano confinment on of its phase behavior were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous anodic aluminum oxide membranes by melt infiltration in the isotropic phase under argon atmosphere. The filled membranes have the thickness of 80 µm and the diameter of 15mm and parallel aligned tubular nanopores having the pore diameters of 25, 40, 80 and 180 nm. The filling degree for each sample was checked by thermogravimetric analysis (TGA) in order to ensure complete filling. The bulk HAT6 forms, a hexagonal columnar phase between the isotropic phase above 371 K, and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 forms two peaks in the heat flow during the plastic crystalline-to-hexagonal columnar phase transition, which might be the evidence of two different phase structures close to the wall and in the pore center. Moreover, the isotropic-to-columnar transition of the confined HAT6 shifts with decreasing pore diameter to lower temperatures.
Collective Orientational Order and Phase Behavior of a Discotic Liquid Crystal under Confinement
(2018)
Discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to self-organize into columns in a hexagonal columnar mesophase, driven by the overlapping of the π orbitals of their aromatic cores. This leads to a high charge-carrier mobility along the column axis. Previous studies on DLCs showed that their properties, such as phase transition temperatures and enthalpies, are susceptible to nanoconfinement. In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6) was confined into parallel aligned cylindrical nanopores of anodic aluminum oxide (AAO) membranes by melt infiltration. Furthermore, the pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. Collective orientational order and phase behavior of HAT6 confined into modified and unmodified nanopores of AAO were investigated by broadband dielectric spectroscopy and differential scanning calorimetry respectively.
The interest in porous anodic aluminum oxide (AAO) has been rapidly growing due to its numerous applications in separation, catalysis, energy generation and storage, electronics, and sensors. From the scientific point of view, AAO is a topical interest in soft matter fields. Spatial confinement of soft matter in nanoporous media influences its structure, thermodynamics, and mobility. Embedding polymers and liquid crystals into nanopores of AAO results in a 2D nanoconfinement of these materials. This confinement affects their properties, compared to the bulk, such as phase transition temperatures and enthalpies, molecular mobility, and architecture of the crystallization. On the other hand, discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to organize and stack themselves into columns in a hexagonal columnar mesophase, a mesophase in between the plastic crystalline and isotropic phase, driven by the overlap of the π orbitals of their aromatic core. This leads to a high charge-carrier mobility along the column axis. Further, these columns could then be considered as “molecular nanowires”. In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6), a triphenylene based DLC, was confined into nanoporous AAO membranes. The structure, dynamics and the phase behavior of the confined HAT6 were investigated by broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). HAT6 was embedded into nanoporous AAO membranes by melt infiltration in the isotropic phase under argon atmosphere. The membranes have parallel aligned cylindrical nanopores, with pore diameter of 10, 20, 25, 40, 80, 120 and 180 nm. The filling degree for each sample was checked by thermogravimetric analysis (TGA) in order to ensure complete filling. Bulk HAT6 forms a hexagonal columnar phase; in between the isotropic phase above 371 K and the plastic crystalline phase below 340 K. Unlike the bulk, the confined HAT6 split the plastic crystalline-to-hexagonal columnar phase transition in two, which might be interpret as two different phase structures; close to the wall and at the pore center. Moreover, the isotropic-to-columnar transition of the confined HAT6 shifted, with decreasing pore diameter, to lower temperatures. Furthermore, pore surfaces of a series of membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. HAT6 was embedded into the modified membranes by the same aforementioned preparation. The influence of the changed host-guest-interaction, on the structure, dynamics, and the phase behavior of HAT6 confined in the modified membranes, was also investigated by BDS and DSC.
Collective Orientational Order and Phase Behavior of a Discotic Liquid Crystal under Confinement
(2018)
Discotic liquid crystals (DLCs) are a promising class of soft matter for electronic applications. This is due to their ability to self-organize into columns in a hexagonal columnar mesophase, driven by the overlapping of the π orbitals of their aromatic cores. This leads to a high charge-carrier mobility along the column axis. Embedding liquid crystals into nanopores of anodic aluminum oxide (AAO) results in a 2D nanoconfinement of these materials. This confinement affects their properties, compared to the bulk, such as phase transition temperatures and enthalpies, molecular mobility, and crystallization.
In this study, 2,3,6,7,10,11 hexakis[hexyloxy] triphenylene (HAT6) was confined into parallel aligned cylindrical nanopores of AAO membranes by melt infiltration. The membrane as confining hosts used have varying pore diameters, from 10 nm to 160 nm, covering a broad pore size range, thus, a better understanding of the confinement effect on phase behavior and molecular configuration in the pores. Furthermore, it is aimed to obtain axial ordering or to increase degree of axial ordering by chemically modifying the surfaces of the pores. Therefore, the pore surfaces the membranes were chemically modified, resulting in a more hydrophobic pore surface than the unmodified ones. The phase behavior was explored by a power-compensated DSC allowing the detecting of small changes in the phase behavior. In the literature, dielectric spectroscopy was demonstrated as a method to monitor molecular order inside the pores. Here, we also investigate the collective orientational order, corresponding to dominating molecular ordering, by dielectric spectroscopy.
Since discovery of discotic liquid crystals (DLCs), consisting of a disklike rigid aromatic core and flexible alkyl chains attached to the core, dating back to Chandrasekhar’s work in 1977, they have been extensively investigated to reveal their fundamental properties and potential for applications. The researches on DLCs in last decades showed that DLCs can be considered as promising materials for organic electronic applications since they exhibit one dimensional high charge mobility along the column axis in a columnar mesophase. The mobilies of the rigid aromatic core and the flexible alkyl chains can influence their application properites, e.g. the charge carrier mobility, therefore, it needs to be explored in detailed.
In this study, a series of dipole functionalized triphenylene-based discotics, forming a columnar mesophase, were investigated to reveal the influence of the functionalization on phase behavior, molecular dynamics and as well as conductivity. The molecular mobility of the discotics was probed by broadband dielectric spectroscopy (BDS). In addition to conductivity and localized dynamics, glassy dynamics were also observed. The phase behavior of the material was explored by a power-compansated differential scanning calorimetry (DSC). Beside the phase transition temperatures and enthalpies, thermal glass transitions were found for all the materials. Moreover, the glassy dynamics were further investigated by Flash DSC, which is a chip-based calorimetry technique allows fast heating and cooling rates as high as 10000K/s.
Non-linear optical emitters are promising materials for energy applications and biotechnologies. Solid-state multi-band emitters like lanthanide doped up-conversion nanoparticles (UCNPs) show excellent photostability, are excitable in the near infrared (NIR), and show emission bands from the UV to SWIR spectral regions. The optical properties of these materials strongly depend on the excitation power density, i.e., the number of photons absorbed per time interval. The upconversion (ΦUC) and downshifting quantum efficiencies (ΦDS) of these materials, the excitation power dependent population, and the deactivation dynamics are influenced by nanoparticle architecture, doping concentration, and the microenvironment. We studied the fundamental changes of the luminescence properties of ß-NaYF4 UCNPs doped with Yb3+ and Er3+ depending on size, different surroundings such as aqueous and organic media, and different surface chemistries. We obtained further insights into shelling procedures, FRET optimization, influence of doping concentration, and advantages of different sensitizer ions.
The manufacturing of NbC with Ni binder with addition of titanium carbide by using a colloidal process for blending the different powders without a milling step were investigated. The the sintering process and formation of the resulting microstructures, the phase relations and the hardness of the produced cermet materials are characterized.
Metal reducing bacteria (MRB) are able to utilize various materials such as iron, uranium and manganese as well as many organic compounds as electron acceptors. This process leads to the conversion of Fe(III) containing passive film species to soluble Fe(II) oxides and hydroxides. The reduction process triggers the acceleration of general and local corrosion processes. Electron transfer mechanisms are not yet fully understood. In literature it has been controversially discussed to which extend secreted electron shuttles contribute to the extracellular electron transfer (EET).
To understand the chemical and electrochemical interaction mechanisms of MRB with steel surfaces this project combines a variety of in-situ techniques. The changes in oxide chemistry on Fe/steel surfaces in the presence of biomolecules and MRB are under investigation using a newly designed electrochemical cell for in situ XANES (x-ray absorption near edge structure) spectroscopy. Electrochemical quartz crystal microbalance (eQCM) studies support the spectroscopic investigations to gain information about the kinetics of attachment processes and changes in biofilm viscosity. The biofilm structure and composition as well as cell viability are investigated by complementary ex situ spectroscopic and microscopic analysis.
Combining spectroscopic techniques and eQCM data with electrochemical measurements, biological processes and the resulting degradation of steel surfaces can be observed in a non-destructive manner. Selecting model systems and a defined biological medium allows the determination of individual effects of diverse surface and environmental parameters. The fundamental understanding of bacterial attachment mechanisms and initial steps of biofilm formation will contribute to the development of new antifouling strategies.
The role of metal reducing bacteria (MRB) in corrosion is being controversially discussed in the literature. They can utilize metals including iron, uranium and manganese as well as many organic compounds as electron acceptors. The reduction of Fe(III) compounds to soluble Fe(II) species leads to the destruction of passive films on steel, resulting in acceleration of general and local corrosion processes. Recent research shows that the secretion of electron shuttles like riboflavins also contribute to the extracellular electron transfer (EET).
The aim of this project is to understand the chemical and electrochemical interaction mechanisms of MRB with steel surfaces by means of combined in situ techniques. An electrochemical XANES (x-ray absorption near edge spectroscopy) cell has been designed to study the changes of passive film chemistry in the presence of biomolecules and MRB. Electrochemical quartz crystal microbalance (eQCM) is used for studying the kinetics of bacterial cell attachment and diffusion of biomolecules in model biofilms. In situ investigations are complemented by ex situ spectroscopic and microscopic analysis to investigate the biofilm structure, composition and cell viability.
Via the combination of electrochemical methods with spectroscopic techniques and QCM we are able to follow biological processes and resulting degradation of steel surfaces in a non-destructive manner. The selection of model systems and a defined biological medium allows the identification of the effects of individual surface and environmental parameters. The fundamental understanding of bacterial attachment mechanisms and initial steps of biofilm formation will contribute to the development of new antifouling strategies.
Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.
Many engineering structures are made of composite materials or metal foam. To simulate the deformational behaviour of these structures often requires a high number of discretisation elements. This in turn yields a very large system of linear
equations that are extremely time and memory consuming or practically impossible to solve. It is therefore desirable to find an approach to overcome this obstacle.
The integration of finite element method (FEM) into the least-squares adjustment presented in is further extended for a joint evaluation of an elastostatic model and displacement field measurement. For linear solids which obey the Hooke's law, the material parameters determination from measurements is being examined.
Ferritic alloys containing Cr form Cr5S6 precipitates along grain boundaries in hot SO2 environment. Grain boundary precipitates may influence the steel’s mechanical behavior. Cr5S6 precipitates were reconstructed three-dimensionally using FIB tomography analysis to determine the volume, number, and penetration depth. The volume growth of Cr5S6 precipitates increased only for the initial aging time of 3 h but became constant after 6 h. The number of precipitates increased linearly.
Die Rasterkraftmikroskopie (AFM) hat sich in den letzten Jahren als eine vielseitige Abbildungstechnik von Oberflächen mit einer sehr hohen Ortsauflösung etabliert. Über die Untersuchung der reinen Oberflächentopographie sind erweiterte Modi in der Lage, gleichzeitig Informationen über die elektrischen und magnetischen Eigenschaften sowie Adhäsionsprozesse auf Oberflächen zu liefern. Interessanter wird es, wenn das AFM mit geeigneten Messzellen für in-situ-Untersuchungen in kontrollierten Atmosphären oder in Elektrolyten unter elektrochemischer Kontrolle ausgestattet ist. Dies ermöglicht die Untersuchung von Korrosions- und Adhäsionsprozessen unter Bedingungen, die die Betriebsumgebung repräsentieren.
Ein aktueller Forschungsschwerpunkt unseres Fachbereiches liegt in den Untersuchungen der Deformationseigenschaften von Funktionsschichten auf Leichtmetalllegierungen, sowie in situ Untersuchungen des Korrosionsverhaltens unter kombinierter korrosiver und mechanischer Beanspruchung mittels AFM. Durch die Integrierung eines Zug-Druckmoduls in den Probentisch des Rasterkraftmikroskops haben wir jetzt die Möglichkeit, verschiedene Materialien uniaxialen Umformversuchen mit bis zu 5 kN Kraft zu unterziehen. Dabei können unter anderem auch zyklische Belastungen genutzt werden, um Ermüdungsprozesse zu simulieren. Da die Messungen in situ ohne die De- und Remontage der Probe durchgeführt werden, ermöglicht der Aufbau nicht nur Messungen mit präziser Positionssteuerung, sondern auch die Untersuchung von Prozessen im elastischen Bereich, die für die Aufklärung der Mechanismen, die zu Ermüdungsversagen führen, entscheidend sind.
Die Posterpräsentation wird detaillierte Informationen zum neuen AFM-Setup liefern und unsere aktuellen Ergebnisse zur Verformung dünner Schutzschichten auf AA2024-T3 zusammenfassen.
Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs.[1] Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs.
Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs.
An alternative method for lithium isotope amount ratio analysis is proposed by combining atomic absorption spectrometry with spectra data analysis by machine leaning. It is based on the well-known isotope shift of around 15 pm for the electronic transition at wavelength 670.7845 nm which can be measured by a high-resolution continuum source atomic absorption spectrometer (HR-CS-AAS). For isotope amount ratio analysis, a scalable three boosting machine learning algorithm (XGBoost) was employed and calibrated with a set of samples with a 6Li isotope amount fraction ranging from 99% to 6%. The absolute Li isotope amount fractions of these calibration samples were previously measured by multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) and used as ab-initio data for the machine learning algorithm. Validation of the machine leaning model was performed with two standard reference materials (LSVEC and IRMM-016). The procedure was employed for the isotope amount ratio determination of a set of stock chemicals (Li2CO3, LiNO3, LiCl, LiOH, and LiF) as well as a BAM candidate LiMNC cathode reference material. Achieved uncertainties are one order of magnitude higher than those obtained by MC-ICP-MS. This precision and accuracy is nonetheless sufficient to resolve natural occurring variations in Lithium isotope ratios. Also, the LiMNC material was analyzed by HR-CS-AAS with and without matrix purification. The results are comparable within statistical error.
Comparison of Formaldehyde Concentrations in Emission Test Chambers Using EN 717-1 and EN 16516
(2018)
For many years EN 717-1 (Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method) is the standard for formaldehyde emission testing of wooden boards. In 2017 EN 16516 (Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air) was published as a new harmonised standard for the emission testing of construction products. Because test chamber conditions are different, both standards give different concentrations for formaldehyde. For the determination of a conversion factor four test series were set up with different wooden boards.
Acoustics is an important aspect for large rooms especially in schools, kindergartens and offices. Foam tiles made from melamine resins are often used for acoustic insulation because they show good fire resistance and good thermal insulation properties. But they can emit formaldehyde. In Germany there are cases with a resulting indoor air concentration of higher than 100 µg/m³. In this study samples from two schools and one office were investigated. Additionally, new tiles were purchased and tested to evaluate the general potential as formaldehyde source.
Quality Aspects of Additively Manufactured Medical Implants - Defect Detection in Lattice Parts
(2019)
Additive Manufacturing technologies are developing fast to enable a rapid and flexible production of parts. Tailoring products to individual needs is a big advantage of this technology, which makes it of special interest for the medical device industry and the direct manufacturing of final products. Due to the fast development, standards to assure reliability of the AM process and quality of the printed products are often lacking. The EU project Metrology for Additively Manufactured Medical Implants (MetAMMI) is aiming to fill this gap by investigating alternative and cost efficient non-destructive measurement methods.
Upconversion nanoparticles are characterized by their ability to convert low energy near-infrared excitation in high energy emissions in the visible range. This is enabled by sequential absorption of two or more photons via energy transfer from the sensitizer lanthanide ion Yb3+ to an activator lanthanide ion, e.g. Er3+. Yb3+ sensitation has the advantage of 980 nm excitation achieved by commercial available low power cw laser modules.
Nevertheless, for some applications, especially in aqueous media, which is predominantely in bioanalytical applications, there is the drawback of a local Absorption maximum of water at this wavelength. Sample heating can occur, and excitation power density is strongly distance dependent.
To overcome this issue, the idea is to shift the excitation wavelength to 808 nm. This can be achieved by a tandem-excitation using Nd3+ and Yb3+ ions. Nd3+ gets excited by 808 nm irradiation and transfers the energy to Yb3+, which triggers the upconversion emission of the Er3+ ions. Therefore, it is mandatory to separate Nd3+ and Er3+ by core-shell architecture for reducing the energy backtransfer from Er3+ to Nd3+.
To further enhance the upconversion luminescence an additional inert shell formed by the host material NaYF4 reduces the quenching effects caused by surface defects and dangling bonds.
Fibre-Matrix-Debonding in glass fibre reinforced dental posts can play an important role for their mechanical performance and long term stability… We show that synchrotron X-ray refraction radiography (SXRR) allows analysis of large samples (up to several millimetres) without compromising the detectability of sub micrometer defects.
The assessment of high cycle fatigue in additive manufactured (AM) components is a challenge due to complex microstructure, anisotropic material behavior, residual stresses and porosity / lack-of-fusion defects. Due to the statistical distribution of defects, a high scatter band of S-N-curves is expected. The fracture mechanics-based fatigue assessment of additive manufactured components must consider the propagation of short cracks emanating from defects.
In this work, the fatigue crack propagation resistance in the short and large crack regimes of additive and conventionally manufactured AISI 316L stainless steel is examined experimentally based on the cyclic R-curve. However, remaining residual stresses in the AM specimen lead to unexpected and dramatic crack-growth during the pre-cracking procedure.
Components in aircrafts are usually replaced when critical defects are present.
An alternative approach is repairing using gas dynamic cold spraying: metal particles are shot at a surface at supersonic speeds to selectively rebuild damaged material. Compared to other material-deposition techniques, its advantage is the small thermal impact on the component, preserving its mechanical properties.
Component-repair can save considerable amounts of energy and resources. However, its industrial application at large scale needs reproducible, good repair-material properties to guarantee a safe component life. The aim of this project is the development of safe, automatized repair-procedures considering the mechanical fatigue properties of the repair.
Additively Manufactured (AM) parts are still far from being used in safety-relevant applications, mainly due to a lack of understanding of the feedstock-process-propertiesperformance relationship. This work aims at providing a characterization of the fatigue behavior of the additively manufactured AISI 316L austenitic stainless steel and a direct comparison with the fatigue performance of the wrought steel. A set of specimens has been produced by laser powder bed fusion (L-PBF) and a second set of specimens has been machined out of hot-rolled plates. The L-PBF material shows a higher fatigue limit and better finite life performance compared to the wrought material, accompanied by an extensive amount of cyclic softening.
The chemical industry has expressed great interest in using polyethylene terephthalate (PET) as material for packagings for the transport of dangerous goods. Due to the high strength and stiffness of PET, the wall thickness and weight of packagings can be reduced. This is a relevant cost factor. PET is a semi-crystalline thermoplast which is produced by polycondensation of terephthalic acid and ethylene glycol.
According to the European dangerous goods regulations RID and ADR, samples of PET design types of packagings for dangerous goods must be pre-stored with the original filling good for six months at 23°C, before the design type tests can be carried out. For packagings made of polyethylene (PE) tests to prove the stress cracking resistance by using laboratory methods are possible to reduce time and costs. Therefore, standard liquids, simulating the different types of damaging effects on PE are defined in RID and ADR. However, there is no information and research available about the damaging mechanisms on PET in comparison to PE, especially regarding to stress cracking resistance and test methods.
The aim of this work is to compare the stress cracking resistance of PE and PET with the Full Notch Creep Test (FNCT), which was developed by chemical industry and is described in the standards EN ISO 16101 and EN 15507. It was investigated whether testing specimens made of PE and PET with a full coplanar notch around the middle of the specimens show weakening after the impact of a tensile force in a wetting solution (Lutensol® FSA 10) at 50°C in a test device on the basis of the FNCT.
The test results confirmed the suitability of the method for eight PE grades. Unfortunately, this method couldn’t be used for PET because the specimens broke during notching. In addition the molding of the sheets and the following temper process for twelve hours are very time-consuming, and the specimens broke during notching due to the high brittleness of PET.
Another possibility to provide evidence of stress cracking resistance of PE packagings is laid down in BAM’s Dangerous Goods Rule BAM-GGR 015. This test was carried out with PE and PET bottles to compare both materials. Therefore 1l test bottles were filled with a 5% wetting solution and mounted with a clamping tool for 28 days at 40°C. Tensile test specimens were cut out afterwards from the middle of the bottles in the deformed areas. Tensile strength and breaking elongation of PE specimens were determined in comparison to the PET specimens. The tensile properties of the PET specimens couldn’t be determined due to the strength and the stiffness of the material.
In conclusion the only way to provide information about the stress cracking resistance of PET was to perform stacking tests. 1l bottles made of PE and PET were filled with a 5% wetting solution and stored with a stacking load for 28 days at 40°C according to EN ISO 16495. Design types of PE and PET both passed the stacking tests.
The chemical industry has expressed great interest in using polyethylene terephthalate (PET) as material for packagings for the transport of dangerous goods. Due to the high strength and stiffness of PET, the wall thickness and weight of packagings can be reduced.
The aim of this work was to find a laboratory test method for the determination of the stress cracking resistance of PET. One test method is the Full Notch Creep Test (FNCT), which was developed for polyethylene (PE) and is described in the standards EN ISO 13274 and EN 15507. It was investigated whether testing specimens made of PET with a full coplanar notch around the middle of the specimens show weakening after the impact of a tensile force in a wetting solution at 50°C. Unfortunately, this method couldn’t be used for PET because the specimens broke during notching due to the high brittleness of PET. The molding of the sheets and the following temper process for twelve hours are very time-consuming, Another possibility is laid down in BAM’s Dangerous Goods Rule BAM-GGR 015. This test was carried out with 1l PET bottles, which were filled with a 5% wetting solution and mounted with a clamping tool for 28 days at 40°C. Tensile test specimens were cut out afterwards from the middle of the bottles in the deformed areas. The tensile properties of the PET specimens couldn’t be determined due to the hardness of the material.
In conclusion, the only way to provide information about the stress cracking resistance of PET was to perform stacking tests with PET design types of packagings. 1l bottles made of PET were filled with a 5% wetting solution and stored with a stacking load for 28 days at 40°C according to EN ISO 16495. The test bottles of PET passed the stacking tests.
Tanks for heating oil made of polyethylene grades have been on the market since the early 1970s in Germany. Tank manufacturers recommend the replacement of the tanks after a period of 30 years due to guarantee safety. Polyethylene grades are subject to ageing by alteration of the properties during their life cycle. The degree of ageing and the nature of the degradation process mainly depend on the chemical degradation of the polyethylene, the wall thickness of the tank and the environmental conditions. There are no results available on the long-term behavior of the polyethylene grades, especially after a service life of more than 30 years. The aim of this investigation was the determination of the factual degree of damage in comparison to the uncontaminated polyethylene grades. Material data of the used polyethylene grades are available because the BAM was the competent authority for the tests and expert reports for the approval of these tanks until the middle of the 1990s.
The determination of the Melt Flow Rate (MFR) and the Fourier Transmission IR Spectroscopy (FTIR) of tank sections from the bottom, the shell and the roof of 10 segregated heating oil storage tanks produced of polyethylene grades A and B were used as tests methods.
The MFR measurements of the tank sections showed differences in the values depending on the weight which was used (5 kg or 21.6 kg). A reduction of the MFR values was measured for most of the sections of tanks made of polyethylene grade B after a service life of the tanks of more than 30 years. This grade is mainly subject to the internal ageing by cross-linkages, increased degree of branched molecules and loss of the plasticizer, and to a lesser extent by oxidative degradation. The FTIR analysis, especially of tank sections of the bottom and the shell showed that the intensity of the CH2 asymmetric and symmetric stretching vibrations in the range: 2800 - 2900 cm-1 and the CH2 bending deformation vibration at 1400 cm-1 increased due chain scissions. The intensity of the carbonyl stretching vibration C=O at 1740 cm-1 is low. The carbonyl index characterizes the degree of oxidation.
Wasserstoffbarrieren aus Glas erfahren zunehmend Bedeutung als Werkstoff in der Energietechnik. Trotz wachsender Anwendungen liegen überwiegend empirisch gewonnene Beziehungen zwischen Glaszusammensetzung und Wasserstoffpermeation vor, die im wesentlichen aus dem Verhalten von Kieselglas abgeleitet werden. In dieser Studie werden daher topologische Parameter der Glasstruktur identifiziert und mit thermodynamischen Parametern korreliert. Auf der Seite der Glastopologie steht das freie Volumen und der Vernetzungsgrad des Netzwerkes während auf der thermodynamischen Seite die Konfigurationsentropie bzw. die Konfigurationswärmekapazität Aufschluss über die Verteilung des freien Volumens geben kann. Dabei wird angenommen, dass für Temperaturen weit unterhalb der Glasübergangstemperatur die chemische Löslichkeit von H2 zu vernachlässigen ist. Um die eingeschränkte Datenlage für die Wasserstoffpermeation kompositionell zu erweitern, wurden zusätzlich Heliumpermeationsmessungen ausgewertet. Die Ergebnisse zeigen, dass für Silicatgläser ein charkteristisches Verhältnis von freiem Volumen zu Netzwerkaufspaltung herrschen muss, um permeationsstabile Gläser zu erhalten.
An efficient energy provision using fuel cells is linked to effecitve hydrogen storage capabilities. Because of its low intrinsic hydrogen permeability, glass has a huge potential in modern concepts of hydrogen storage. Previous studies on oxidic glasses showed an empirical connection between glass composition and gas permeation, which was mainly derived from the behavior of silica glass. In this study we focus on the relationship between topologic (free volume; network polymerization) and thermodynamic (configurational entropy) parameters. The comparison of three glasses within the meta (earth-) alkaline alumino silicate system to silica glass shows that an increase of the atomic packing factor (APF) does not necessarily decrease the permeability. Furthermore, the results suggest a connection between ΔCp at Tg and hydrogen permeability of the glass. All experiments were performed assuming that chemical hydrogen solubiltity in glass is negligible at temperatures well below the glass transition temperature.
Effective hydrogen storage capacities are prerequisite for an efficient energy provision using fuel cells. Since glass has low intrinsic hydrogen permeability, it is a promising material for hydrogen storage containers as well as hydrogen diffusion barriers. Previous studies on oxidic glasses suggest a correlation between the glass composition and hydrogen permeation that was derived mainly from silica glass. In the present study, we concentrate on the relationship between thermodynamic (i.e., configurational entropy) and topologic (i.e., free volume, network polymerization) parameters. Experimental data were gathered well below the glass transition temperature, excluding significant effects caused by structural relaxation and chemical dissolution of hydrogen. The results of seven analysed glasses on the SiO2-NaAlO2 joint showed that the hydrogen permeability in fully polymerized glasses cannot solely be derived from the total free volume of the glass structure. Hence, evidence is provided that the size distribution of free volume contributes to hydrogen solubility and diffusion. Additionally, the results indicate that the configurational heat capacity ΔCp at Tg affects the hydrogen permeability of the investigated glasses.
3D coherence scanning interferometry (CSI) is anoptical, non-contact and rapide measurement technique using a defined bandwidth of white light at normal incidence. White light interference microscopy (WLIM) providest here-dimensional surface topometry data up to a resolution of 0.4 µm lateral and 0.1 nm vertical. Three operating modi, surface, films and advanced films, enable measurements of step heights, roughness, wear volume, cone angle, surface pattern and layer thickness. Traceability to SI system is ensured by certified standards (PTB/NIST) within a DAkkS DIN EN ISO/IEC 17025:2018 accredited lab.
- einer der größten zusammenhängenden Gebäudekomplexe in Europa
- Anfang der dreißiger Jahre von Prof. Sagebiel geplant, 1936 Baubeginn, heute zu 70%fertiggestellt
- steht heute wegen großer verkehrs- und baugeschichtlicher Bedeutung unter Denkmalschutz
- in Abfertigungshalle befindliche Fachwerkträger mit selbsttätiger Vorspannung zeigen Anfang des Spannbetonbaus
- ab 1997 Überarbeitung des Nutzungskonzeptes der Räume über den Fachwerkträgern durch Berliner Flughafengesellschaft
- Erfordernis der Abschätzung der Tragfähigkeit der Fachwerkträger
1. Introduction
A normally unwanted process that can arise when converging an electron beam onto, e.g. microparticles, has been called "damage induced by electric field" (DIEF) [1]. By DIEF, the convergent electron beam (CEB) imparts a high amount of energy to the microparticle locally and strongly interacts with its atoms. At a specific current density J, which can be controlled by the convergence angle α, the irradiated material begins to transform. The phenomenon of expelling nanomaterial from microparticles under the influence of a convergent electron beam (CB) in a transmission electron microscope (TEM) has been largely studied [2]. Several types of nanoparticles (NPs) have been observed for different metallic materials and metal oxides after specific CB protocols (P) in the TEM. Thus, DIEF can be used as a promising synthesis method controlled changes of micrometric material to create new nanometric material compositions and morphologies.
While these reactions have been observed in situ at the high acceleration voltages associated with TEM, it remains unclear whether the SEM can also be used to fabricate NPs via DIEF. In contrast to TEM there is no possibility to statically convert the electron beam to a range of α to reach the needed J as in TEM. Instead, the scanning parameters and the magnification can be manipulated so as to find an integrated J. Considering that the scanning electron microscope (SEM) is easier to use, more accessible and cheaper than a TEM, here we explore the possibility to transfer the concepts of DIEF known to operate in the TEM for in situ NP generation SEM.
2. Objectives
The main goal is to determine whether DIEF can be translated to the SEM perform to controlled in situ fabrication of nanoparticles from microparticles, using gold microparticles on amorphous SiO substrate as precursors. We determine what experimental parameters must be taken into account to create SEM-based CBPs for NP creation in the SEM with these materials.
3. Materials & methods
Gold microparticles with diameter of around 1 to 3 µm were deposited on electron transparent amorphous SiO/SiO2 substrate. Using a convergent electron beam protocol (CBP) in a scanning electron microscope (SEM) at an acceleration voltage of 30 kV, the gold microparticles were irradiated until a production of NPs takes place as shown in figure 1. The beam current varied between 16 and 23 nA.
4. Results
Depending on the CBP parameters, either only Au NPs or a mixture of Au and Si NPs are produced. The particle size ranges from a few nm up to 100 nm, and it depends on the distance of the NP to the initial position of the microparticle. Further beam parameters such as the dwell time, the effective irradiated volume and particle size determine whether NPs are produced or if the microparticles only are expelled from the substrate without reacting.
5. Conclusion
The SEM can be used as an instrument for synthesizing nanomaterials via DIEF. Different CBP protocols can be applied for obtaining either gold nanoparticles or silicon + gold nanoparticles
The phenomenon of expelling nanomaterial from microparticles of different materials, such as Au, WO3 or B2O3 under the influence of a convergent electron beam (CB) of a transmission electron microscope (TEM) was reviewed by Ignacio Gonzalez-Martinez [1]. Converging the e-beam in a TEM means that a high amount of energy enters the microparticle at a very local place and interact with the matter. Obviously, during the convergent beam protocol, no imaging with the electron beam is possible, but at the end, nanoparticles with different appearances lie down next to the microparticle while its size is reduced.
Hence, there is a blind spot in the observation, which we want to fill, as we want to help clarify the nature of the expelling phenomenon. One hypothesis that explains the phenomenon is the so-called damage (of the microparticle) induced by an electric field (DIEF). Within this theory, the material is ionized and expelled in form of ionic waves. Our aim is therefore to fabricate specimens with artificial microlandscapes, as schematically exemplified in figure 1a), using the focused ion beam (FIB) and micromanipulators, as experimental setups to follow the paths of the expelled material.
As a first step towards the fabrication of such specimen, we make experimental feasibility studies for each fabrication method, FIB structuring with Ga+ ion beam and micromanipulated microparticle deposition. Bridges (gray regions in Fig. 1) are created by milling a commercially available electron transparent membrane (silicon oxide or carbon) of a Cu-TEM grid. Platinum or carbon walls (blue features in Fig. 1) are built to stand on those bridges. Microparticles (yellow sphere in Fig. 1) of gold or other material are deposited in the center of the bridges.
Figure 2a) shows four square holes (black area) and between them the residual silicon oxide membrane bridges (dark grey). On top of the bridges, walls (light grey) are deposited. The width of the bridges is different, the walls overlap the holes as well as the distance between the walls is very small, so these and other parameters need to be optimized. Figure 2b) shows a square hole (black) with bridges (white) on the right side on top of a carbon membrane (grey). There are still some obstacles which needs to be eliminated. For instance, the deposition process of the walls is not reliable as visible at the wall on top where a hole arises instead of a wall.
These studies are still in progress and the results are further discussed in terms of the applicability for the DIEF experiment in the TEM.
Damage induced by electric field (DIEF) that happens in the transmission electron microscope (TEM) when converging the electron beam (e-beam) on microparticles (MPs) can be used to synthesis new nanomaterial and nanomaterial compositions. The research questions are to clarify the limits and possibilities of the method regarding materials that can be produced, systems to which it is applicable and working beam parameters. Synthesis of nano-objects from microparticles using DIEF in TEM could be shown for different materials. Additionally, DIEF using the e-beam in a scanning electron microscope (SEM) can also be used to synthesis nano-objects. A deeper material analysis of this nano-objects was done using TEM and shows that the material of the nanoparticles (NPs) can be gold or/and silicon. Furthermore, the size of the NPs depends on the distance to the center of DIEF whereby the larger NPs are closer to the center. The areas of gold NPs are promising candidates for plasmonic or photonic devices for energy storage or transport.
The optical properties of semiconductor nanocrystals (SCNC) are controlled by constituent material, particle size, and surface chemistry, specifically the number of dangling bonds favoring nonradiative deactivation, and hence also by particle synthesis. In this respect, the fluorescence properties of coreshell CdSe SCNCs with different shells and surface chemistries were studied on ensemble and single particle level, using steady state and timeresolved fluorometry and confocal microscopy with time correlated single photon counting detection. Special emphasis was dedicated to correlate ensemble photoluminescence (PL) quantum yields and decay kinetics with particle brightness, PL time traces, and the Ontime fraction of the single SCNCs. Additionally, the confocal PL images were correlated with AFM measurements in order to derive the amount of absorbing, yet nonemisssive ”dark” SCNCs, the presence of which leading to an underestimation of ensemble PL quantum yields. The results of this study can help to identify synthetic routes and surface modifications minimizing the fraction of dark SCNC, thereby closing the gap to the ultimate goal of colloidally and photochemically stable SCNCs with a PL quantum yield of close to unity.
The optical properties of semiconductor nanocrystals (SCNCs) depend on constituent material, particle size, and surface chemistry, with the size of the photoluminescence (PL) quantum yield (QY) and the PL decay kinetics being largely controlled by the number of dangling bonds, which have to be properly passivated for high quality materials. Hence, PL measurements can provide insight not only in SCNC photophysics, yet can be also used for quality control of SCNC synthesis and surface modification. In this respect, steady state and time-resolved fluorometry and confocal microscopy with time correlated single photon counting were used to study the PL properties of core-shell CdSe SCNCs with different shells and surface chemistries on ensemble and single particle level, thereby focusing on a correlation of ensemble PL QY and PL decay kinetics with particle brightness, PL time traces, and the On-time fraction of single SCNCs. Additionally, confocal PL images were correlated with AFM measurements in order to derive the amount of absorbing, yet non-emissive ”dark” SCNCs, the presence of which resulting in an underestimation of ensemble PL quantum yields. The results of this study can help to identify synthetic routes and surface modifications, which minimize the fraction of dark SCNCs.