Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (640)
- Vortrag (593)
- Posterpräsentation (204)
- Forschungsdatensatz (67)
- Beitrag zu einem Tagungsband (28)
- Sonstiges (14)
- Forschungsbericht (13)
- Beitrag zu einem Sammelband (10)
- Buchkapitel (8)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (6)
Sprache
- Englisch (1487)
- Deutsch (113)
- Mehrsprachig (3)
- Spanisch (2)
Schlagworte
- Nanoparticles (122)
- Mechanochemistry (95)
- SAXS (89)
- XPS (60)
- Laser-induced periodic surface structures (LIPSS) (58)
- Automation (52)
- Electron microscopy (45)
- X-ray scattering (45)
- SEM (42)
- MALDI-TOF MS (41)
- Polylactide (36)
- Corrosion (34)
- In situ (34)
- VAMAS (34)
- Microplastics (33)
- HAXPES (32)
- TED-GC/MS (32)
- Surface functionalization (29)
- Small-angle X-ray scattering (28)
- Nanomaterials (27)
- Nanoparticle (27)
- Particle size distribution (26)
- MOUSE (25)
- Nanocomposites (23)
- Femtosecond laser (22)
- Standardisation (22)
- Mikroplastik (21)
- Reference materials (21)
- Boehmite (20)
- X-ray photoelectron spectroscopy (20)
- Crystallization (19)
- DFT (19)
- Thin films (19)
- XRD (19)
- Bonding analysis (18)
- Microplastic (18)
- Scattering (18)
- AFM (17)
- Catalysis (17)
- Ellipsometry (17)
- Geant4 (17)
- Laser processing (17)
- Simulation (17)
- Applications (16)
- Interlaboratory comparison (16)
- NanoSolveIT (16)
- Radiation protection (16)
- Synthesis (16)
- Dosimetry (15)
- Materials Informatics (15)
- ToF-SIMS (15)
- Calcium sulfate (14)
- Conductivity (14)
- DNA (14)
- Functionalized graphene (14)
- Inter-laboratory comparison (14)
- Microdosimetry (14)
- Nanocomposite (14)
- Rigid amorphous fraction (14)
- Sample preparation (14)
- Spectroscopic ellipsometry (14)
- Broadband dielectric spectroscopy (13)
- Computational Chemistry (13)
- Cyclization (13)
- Database (13)
- Femtosecond laser ablation (13)
- Geant4-DNA (13)
- Graphene (13)
- MCS (13)
- Machine learning (13)
- Traceability (13)
- Workflows (13)
- XANES (13)
- EDS (12)
- MIC (12)
- Phonons (12)
- Polymer 3R (12)
- Reference material (12)
- Struvite (12)
- Bonding Analysis (11)
- C-F bond activation (11)
- Dielectric spectroscopy (11)
- Heterogeneous catalysis (11)
- Laser-induced X-ray emission (11)
- MOF (11)
- Oxidation (11)
- Phosphates (11)
- Polymer (11)
- Polymers (11)
- Polymorphism (11)
- Small angle scattering (11)
- X-ray diffraction (11)
- EBSD (10)
- LEE (10)
- Methodology (10)
- Nanoplastics (10)
- Radiation damage (10)
- Ring-opening polymerization (10)
- Standardization (10)
- AuNP (9)
- Biofilm (9)
- Chemically Complex Materials (9)
- Cocrystal (9)
- Density functional theory (9)
- Diffraction (9)
- Flexible crystals (9)
- Glass transition (9)
- Laser-induced periodic surface structures, LIPSS (9)
- MOFs (9)
- Monte-Carlo simulation (9)
- Nanostructures (9)
- Oxygen evolution reaction (9)
- Phase diagrams (9)
- Radioactive decay (9)
- Synchrotron (9)
- TED-GC-MS (9)
- TEM (9)
- Thin polymeric films (9)
- TiO2 (9)
- Additive manufacturing (8)
- BDS (8)
- CCMat (8)
- Data analysis (8)
- Energetic materials (8)
- Epoxy (8)
- Flash DSC (8)
- High-throughput (8)
- High-throughput computations (8)
- Hydrogen (8)
- Imaging (8)
- In situ real-time monitoring (8)
- MALDI TOF MS (8)
- Magnetism (8)
- Materialbearbeitung (8)
- Metrology (8)
- Nanoconfinement (8)
- Protein (8)
- XAS (8)
- Amorphous phases (7)
- Atomic force microscopy (7)
- Biobased polymers (7)
- Catalyst (7)
- DNA damage (7)
- Defects (7)
- Discotic Liquid Crystals (7)
- Dynamics (7)
- EXAFS (7)
- Electrocatalysis (7)
- Energy deposit (7)
- Fluorescence (7)
- Friction (7)
- Gold (7)
- Haftfestigkeit (7)
- High-entropy alloys (7)
- Ionic Liquid crystals (7)
- Mass spectrometry (7)
- Mechanical properties (7)
- Microstructure (7)
- Microstructures (7)
- Monte-Carlo simulations (7)
- Nanomaterial (7)
- Nanostructure (7)
- Polycondensation (7)
- Polydopamine (7)
- Polymerization (7)
- Radiationtherapy (7)
- Silver nanoparticles (7)
- Specific heat spectroscopy (7)
- Surface chemistry (7)
- TMDSC (7)
- TOPAS (7)
- Thin polymer films (7)
- Titania nanoparticles (7)
- Transition metals (7)
- Ultrashort laser material interaction (7)
- Ultrashort laser pulses (7)
- ZCF (7)
- Aktivkohle (6)
- Anhydrite (6)
- Atomic Force Microscopy (AFM) (6)
- Automated synthesis (6)
- Beta decay (6)
- Brachytherapy (6)
- Cancer treatment (6)
- Catalysts (6)
- Centrifugal Adhesion Testing (CAT) (6)
- EPMA (6)
- Electrochemistry (6)
- FIB (6)
- Fast Scanning Calorimetry (6)
- Gold Nanoparticles (6)
- High-pressure (6)
- ILC (6)
- Kinetics (6)
- Klebfestigkeit (6)
- Lab automation (6)
- Laser ablation (6)
- Low energy electrons (6)
- Mesoporosity (6)
- Micropatterning (6)
- Multiphoton lithography (6)
- NP (6)
- Nanoplastic (6)
- Neutron scattering (6)
- Particle scattering simulations (6)
- Polyglycerol (6)
- Polymers of intrinsic microporosity (6)
- Radiation therapy (6)
- Size (6)
- Small-angle scattering (6)
- Small-angle x-ray scattering (6)
- Software (6)
- Steel (6)
- TOPAS-nbio (6)
- Thermoresponsive polymer (6)
- Topas (6)
- Transition metal (6)
- Transmission electron microscopy (6)
- UCST-type polymer (6)
- Ultrakurze Laserpulse (6)
- ZIF-8 (6)
- Ab initio simulations (5)
- Acrylamide (5)
- Adsorbed Layer (5)
- Adsorption (5)
- Advanced materials (5)
- Analysis (5)
- Bacterial adhesion (5)
- Carbon nanotubes (5)
- Cement (5)
- Crystalinity (5)
- Deuterium (5)
- Ectoine (5)
- Elemental composition (5)
- G5P (5)
- Graphene oxide (5)
- Green chemistry (5)
- Gypsum (5)
- ISO/TC 202 (5)
- Instrumentation (5)
- Introduction (5)
- Ionic Liquid Crystals (5)
- LLG (5)
- Machine Learning (5)
- Medium Entropy Alloys (5)
- Mesoporous iridium oxide films (5)
- Methanogens (5)
- Microbiologically influenced corrosion (5)
- Micromagnetism (5)
- Mikroplastik-Analytik (5)
- Nanotechnology (5)
- Nucleation (5)
- OH radical (5)
- OOMMF (5)
- Oxygen Reduction Reaction (5)
- PDF (5)
- PGM-free catalyst (5)
- Particle size (5)
- Photocatalysis (5)
- Polymer blends (5)
- Radiolysis (5)
- Raman (5)
- Reference data (5)
- Reproducibility (5)
- Ring-expansion polymerization (5)
- Risk assessment (5)
- Röntgenstrahlung (5)
- SAXS/WAXS (5)
- Shape (5)
- Silicon (5)
- Strahlenschutz (5)
- Surface modification (5)
- Surfaces (5)
- Synchrotron radiation (5)
- Transesterification (5)
- Tribology (5)
- Waveguide (5)
- Wear (5)
- X-ray (5)
- nPSize (5)
- AISI 304L (4)
- Additive Manufacturing (4)
- Adhesive strength (4)
- Affinity chromatography (4)
- Aging (4)
- Atomic Forc Microscopy (4)
- Bassanite (4)
- Bending modulus (4)
- Bio-SAXS (4)
- CUSP (4)
- Capillary waves (4)
- Cement hydration (4)
- Clustered nanoparticles (4)
- Cocrystals (4)
- Composites (4)
- Core-shell (4)
- Cosolute (4)
- Cryo milling (4)
- Crystal Engineering (4)
- Cycloalyphatic epoxy oligosiloxane (4)
- Data (4)
- Data stewardship (4)
- Degradation (4)
- Diaminopyridine (4)
- Direct laser writing (4)
- Discotic liquid crystals (4)
- EC4SafeNano (4)
- Early hydration (4)
- Ectoin (4)
- Epoxy nanocomposites (4)
- Exchange interaction (4)
- Ferromagnetism (4)
- GVP (4)
- Harmonisation (4)
- High Entropy Alloys (4)
- High entropy alloy (4)
- High entropy alloys (4)
- High-entropy alloy (4)
- ISO/TC 229 (4)
- Image analysis (4)
- Image segmentation (4)
- Ionizing radiation damage (4)
- Iron (4)
- Knowledge Readiness Level (4)
- Korrosion (4)
- Landau Lifshitz equation (4)
- Lignin (4)
- Livermore model (4)
- Magnetic moment (4)
- Magnetic nanoparticles (4)
- Material Acceleration Platforms (MAPs) (4)
- McSAS3 (4)
- Metal organic framework (4)
- Metal phosphonates (4)
- Metal-organic-frameworks (4)
- Microbeam Analysis (4)
- Microbeam analysis (4)
- Microwave synthesis (4)
- Milling (4)
- Modelling (4)
- Multi-sample analysis (4)
- NAP-XPS (4)
- NEXAFS (4)
- NTE (4)
- Nano (4)
- Nano@BAM (4)
- NanoDefine (4)
- Nanoelectronics (4)
- Nanofibers (4)
- Nanomaterial classification (4)
- Nanoparticle concentration (4)
- Non-destructive operando analysis (4)
- Normung (4)
- OER (4)
- OH radical scavenger (4)
- Oberflächenanalytik (4)
- Oberflächenmesstechnik (4)
- Object oriented micromagnetic framework (4)
- Particle (4)
- Particle scattering (4)
- Penelope model (4)
- Phase transition (4)
- Polycarbonate (4)
- Polyethylene (4)
- Polymorph (4)
- Polypropylene (4)
- Polyurethane (4)
- Potentiodynamic Polarization (4)
- Probennahme (4)
- Protein unfolding (4)
- Proton conductivity (4)
- Quality assurance (4)
- Quantification (4)
- Quantum dots (4)
- Raman spectroscopy (4)
- Reactive extrusion (4)
- Regulation (4)
- Round robin (4)
- SIMS (4)
- Scanning Kelvin Probe Force Microscopy (4)
- SiO2 (4)
- Single-source precursors (4)
- Single-stranded DNA-binding proteins (4)
- Size distribution (4)
- Sol-gel (4)
- Spectroscopic Ellipsometry (4)
- Spectroscopic imaging ellipsometry (4)
- Spectroscopy (4)
- Stability (4)
- Stochastic Landau Lifshitz Gilbert equation (4)
- Surface analysis (4)
- Thermoelectrics (4)
- Thermography (4)
- Thermogravimetrie (4)
- Thin Films (4)
- Titanium dioxide (4)
- Two-photon polymerization (4)
- VSSA (4)
- WAXS (4)
- X-ray absorption spectroscopy (4)
- X-ray emission (4)
- particle scattering (4)
- ssDNA (4)
- 2PP (3)
- 3D (3)
- 3D printing (3)
- Ab-initio (3)
- Absorption edge tomography (3)
- Adsorbed layer (3)
- Advanced calorimetry (3)
- Alloys (3)
- Aluminium (3)
- Amphiphilicity (3)
- Analytik (3)
- Analytische Zentrifuge (3)
- Antibacterial (3)
- Antibodies (3)
- Aqueous Corrosion (3)
- Archaea (3)
- Artificial digestion (3)
- Atomic Force Microscopy (3)
- Atomistic models (3)
- Austenitic stainless steel (3)
- BAM reference data (3)
- Bacteria (3)
- BioSAXS (3)
- Biofilm formation (3)
- Biomaterials (3)
- Bonding strength (3)
- C-C coupling (3)
- Coating (3)
- Coordination polymers (3)
- Copolymer (3)
- Correlative analysis (3)
- Correlative imaging (3)
- Corrosion monitoring (3)
- Creep (3)
- Crosslinking (3)
- Data-fusion (3)
- Differential scanning calorimetry (3)
- Digital Infrastructure (3)
- Direct laser interference patterning (DLIP) (3)
- Dynamic light scattering (3)
- Dünne Schichten (3)
- Electrical conductivity (3)
- Electro catalyst (3)
- Electrochemical Impedance Spectroscopy (3)
- Electrospinning (3)
- Element-specific spectroscopy (3)
- Ellipsometrie (3)
- Energy dispersive X-ray spectroscopy (3)
- Environmental Simulation (3)
- European Centre (3)
- FTIR (3)
- Fast scanning calorimetry (3)
- Femtosecond laser processing (3)
- Framework (3)
- Free electron laser (3)
- Gas separation membranes (3)
- General Chemistry (3)
- General Materials Science (3)
- Graphene related 2D materials (3)
- Growth Kinetics (3)
- Grüneisen parameter (3)
- H bonds (3)
- HF-shuttle (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- Hard-energy X-ray photoelectron spectroscopy (3)
- Homogeneity (3)
- Hybrid metrology (3)
- ICP-MS (3)
- ISO (3)
- ISO/TC 229 Nanotechnologies (3)
- In situ Raman (3)
- In situ studies (3)
- In-situ (3)
- Industrial applications (3)
- Interatomic potentials (3)
- Interfaces (3)
- Intermodulation AFM (3)
- Interpenetrating polymer network (3)
- Interphase (3)
- Iridium oxide films (3)
- Iron oxide (3)
- Iron oxide nanoparticles (3)
- LC-MS (3)
- Laser-induzierte Röntgenstrahlung (3)
- Lead ions (3)
- Liquid chromatography (3)
- Luminescence (3)
- MAPz@BAM (3)
- Magnetostriktive Beschichtung (3)
- Materials Chemistry (3)
- Materials Design (3)
- Mechanical flexibility (3)
- Mesocrystal (3)
- Mesocrystals (3)
- Mesoporous materials (3)
- Metal organic frameworks (3)
- Method (3)
- Micro- and nanoplastics (3)
- Microplastics standardisation (3)
- Microprinting (3)
- Microscopy (3)
- Monte Carlo (3)
- Mueller-Matrix imaging ellipsometry (3)
- Nanoindentation (3)
- Nanosafety (3)
- Nanostructure quantification (3)
- Non-classical crystallization (3)
- Non-classical crystallization theory (3)
- OH Radical (3)
- OH radicals (3)
- Oberflächenenergie (3)
- Oberflächentechnik (3)
- PXRD (3)
- Phase transitions (3)
- Photooxidation (3)
- Polycarboxylate ether (PCE) (3)
- Polyester (3)
- Polymers with intrinsic microporosity (3)
- Proteins (3)
- Purification (3)
- Python (3)
- QHA (3)
- Qualitätssicherung (3)
- Quantum yield (3)
- ROS (3)
- Radical Scavenger (3)
- Radiotherapy (3)
- Reference Material (3)
- Reference procedures (3)
- Referenzdaten (3)
- Referenzmaterial (3)
- Resonance frequency (3)
- Rigidity (3)
- Ring opening polymerization (3)
- Röntgenemission (3)
- SEM/EDS (3)
- Saxs (3)
- Scanning electron microscopy (3)
- Scattering pattern analysis (3)
- Secondary hazard (3)
- Self-assembly (3)
- Self-driving-labs (SDLs) (3)
- Simvastatin (3)
- Small-angle xray scattering (3)
- Solid-state (3)
- Spectroskopic Imaging (3)
- Stainless steel (3)
- Stand der Normung (3)
- Standards (3)
- Surface chemical analysis (3)
- Sustainability (3)
- TDEP (3)
- TGA (3)
- Thermal decomposition (3)
- Thermal degradation (3)
- Thermodynamics (3)
- Thermoelectric materials (3)
- Thin film metrology (3)
- Time resolved (3)
- Time-resolved scattering (3)
- Topas-MC (3)
- Topas-nBio (3)
- Toxicology (3)
- Transmission Kikuchi Diffraction (TKD) (3)
- Two-photon polymerisation (3)
- Ultrafast laser processing (3)
- Ultrakurzpulslaser (3)
- Ultrashort laser processing (3)
- Ultrashort pulse laser processing (3)
- Ultrashort pulsed laser (3)
- Uncertainty budgets (3)
- Validation (3)
- Verbundfestigkeit (3)
- White light interference microscopy (3)
- X-ray spectroscopy (3)
- Zentrifugentechnologie (3)
- Zinc oxide (3)
- Zirconium (3)
- ZrF4 (3)
- beta particle (3)
- nanoparticle (3)
- 2D materials (2)
- 3D Fourier Transform (2)
- ACEnano (2)
- ALD-Hybridprozesse (2)
- API (2)
- APTES (2)
- Ab initio simulation (2)
- Ab initio thermodynamics (2)
- Abschirmung (2)
- Acoustic levitation (2)
- Additive (2)
- Adhäsion (2)
- Advanced Materials (2)
- Al2O3-Schichten (2)
- Alkali-activated materials (2)
- Alkaline earth metal coordination polymers (2)
- Amorphization (2)
- Amyloid (2)
- Analytic (2)
- Analytical methods (2)
- Anlagensicherheit (2)
- Anodization (2)
- Antibacterial properties (2)
- Atomic Layer Deposition (2)
- Au (2)
- Auge (2)
- Automated analysis (2)
- Automated image analysis (2)
- Automated workflows (2)
- Automatisation (2)
- Automatisierung (2)
- BAMline (2)
- BET (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Base damage (2)
- Base loss (2)
- Bauteilmonitoring (2)
- Beanspruchung auf Zug und Druck (2)
- Beta particle (2)
- Biocorrosion (2)
- Biofilm growth (2)
- Biofilmbildung (2)
- Bioinspiration (2)
- Bismuth (2)
- Boson peak (2)
- Brechungsindex (2)
- Building and Construction (2)
- C3A (2)
- C3A hydration (2)
- CAT-Technologie (2)
- CEN/TC 352 Nanotechnologies (2)
- Cancer (2)
- Case studies (2)
- Centrifugal Adhesion Testing (2)
- Centrifugal adhesion testing (2)
- Ceramics and Composites (2)
- Certification (2)
- Characterisation (2)
- Characterization (2)
- Chemical Bonds (2)
- Chemical analysis (2)
- Chemical bonds (2)
- Chemically complex alloys (2)
- Classification (2)
- Coatings and Films (2)
- Cobalt (2)
- Commercial graphene (2)
- Complex oxides (2)
- Computational Materials Science (2)
- Computerchemie (2)
- Concentration (2)
- Convolutional neural networks (2)
- Correlative Imaging (2)
- Correlative ex-situ ellipsometric analysis (2)
- Corrosion inhibition (2)
- Cribellate spiders (2)
- Crystal (2)
- Crystal engineering (2)
- Crystals (2)
- DFT calculation (2)
- DLS (2)
- DNA radiation damage (2)
- DSC (2)
- Data Management (2)
- Data conversion (2)
- Data curation (2)
- Data fitting (2)
- Data organization (2)
- Delamination (2)
- Delayed addition (2)
- Density Functional Theory (2)
- Desintegracion radioactiva (2)
- Dielectric Spectroscopy (2)
- Diffusion (2)
- Digestion (2)
- Dipsersive XAS (2)
- Direct damage (2)
- Direct laser-interference patterning (DLIP) (2)
- Dispersive XAS (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Double-strand break (DSB) (2)
- Duplex stainless steel (2)
- Dynamic Light Scattering (2)
- EDX (2)
- EMPIR (2)
- EOS (2)
- ESEM (2)
- EU FP7 project NanoValid (2)
- Ectrocatalysis (2)
- Electrical properties (2)
- Electrolysis (2)
- Electrolyte membrane (2)
- Electromagnetic scattering (2)
- Electron Microscopy (2)
- Electron probe microanalysis (EPMA) (2)
- Electronic, Optical and Magnetic Materials (2)
- Elektronenmikroskopie (2)
- Ellipsometric operando investigation (2)
- Energetic Materials (2)
- Energy materials (2)
- Energy storage (2)
- Extended X-ray absorption fine structure (EXAFS) (2)
- FFT (2)
- Faser-Bragg Gitter (2)
- Fe3O4 (2)
- FeNi (2)
- FeNi-Oxide NPs (2)
- Film thickness (2)
- Finite-difference time-domain calculations (2)
- Fließmittel (2)
- Fluoride (2)
- Formaldehyde (2)
- Fourier Transform (2)
- Fourier transforms (2)
- Functional materials (2)
- Functionalization (2)
- GEXRF (2)
- GUM-compliance (2)
- Gene five protein (2)
- Generische Kenngrößen (2)
- Geothermie (2)
- Glutaraldehyde (2)
- Grafting (2)
- Graphene inks (2)
- Graphene oxide flakes (2)
- Graphene powder (2)
- Graphitization (2)
- Grazing exit (2)
- H2020 (2)
- HDF5 (2)
- HF (2)
- HPLC (2)
- Haftvermittler (2)
- Halloysite nanotubes (2)
- Hard x-ray photoelectron spectroscopy (2)
- Harmonisation in microplastics (2)
- High Pressure (2)
- High pressure (2)
- High resolution (2)
- High temperature corrosion (2)
- Holistic experimental procedures (2)
- Holistic science (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration shell (2)
- Hydrogen economy (2)
- Hydrogen evolution reaction (2)
- Hydroxyectoine (2)
- Hydroxyl radical (2)
- Hyperbranched (2)
- Härteprüfung (2)
- ICP-OES (2)
- IIT (2)
- IR (2)
- ISO 14577 (2)
- Imaging XPS (2)
- In situ PXRD (2)
- In-situ SAXS/WAXS (2)
- Indirect damage (2)
- Industrial and Manufacturing Engineering (2)
- Instrumented Indentation Testing (2)
- Instrumented indentation testing (2)
- Integrated Development Environment (2)
- Interlaboratory Comparison (2)
- Interlaboratory Comparisons (2)
- Ionic liquid (2)
- Ionization (2)
- Iridium-titanium mixed oxides (2)
- Kinetic (2)
- Kleb- und Haftfestigkeit (2)
- Knoevenagel condensation (2)
- LDX (2)
- Laboratory management (2)
- Lactide (2)
- Lanthanide (2)
- Large-scale processing (2)
- Large-scale production (2)
- Laser-induced periodic surface structures (2)
- Laser-induced x-ray emission (2)
- Laserschutz (2)
- Layer-by-layer deposition (2)
- Legierungen (2)
- Lifetime (2)
- Liquid Crystals (2)
- Liquid crystals (2)
- Localised corrosion (2)
- MALDI (2)
- MOF composite (2)
- Magnesium alloy (2)
- Magnetic nano-particles (2)
- Magneto-optischer Sensor (2)
- Mapping modifizierter Oberflächen (2)
- Mass spectrometry of polymers (2)
- Material design (2)
- Material processing (2)
- Material synthesis (2)
- Materialinformatik (2)
- Materials (2)
- Materials Properties (2)
- Materials Science (2)
- Materials science (2)
- Measurement data conversion (2)
- Measurement uncertainty (2)
- Mechanical property (2)
- Medizinische Anwendung (2)
- Mehr-Proben-Prüfung (2)
- Mehrprobenprüfung (2)
- Mesoporous (2)
- Mesoporous iridium oxides films (2)
- Mesoporous thin films (2)
- Messtechnik (2)
- Metadata schema (2)
- Metal fluorides (2)
- Metal-organic frameworks (2)
- Metals and Alloys (2)
- Metal–organic frameworks (2)
- Methane (2)
- Methodology in metrology (2)
- Methodology in testing (2)
- Microanalysis (2)
- Microbially induced corrosion (2)
- Microplastic analysis (2)
- Microporous structure (2)
- Mikroplastik-Massengehalte (2)
- Mikroskaliert (2)
- Mixed gas atmosphere (2)
- Molecular masses (2)
- Molecular mobility (2)
- Morphology (2)
- Multi photon lithography (2)
- Multiphoton Lithography (2)
- Mussel-inspired adhesives (2)
- Método de Montecarlo (2)
- Müller-Matrix-Ellipsometrie (2)
- N-Chlorination (2)
- NXsas (2)
- Nano-safety (2)
- NanoSIMS (2)
- Nanocharacterisation (2)
- Nanomaterialien (2)
- Nanomechanics (2)
- Nanometrology (2)
- Nanopatricle (2)
- Nanopipettes (2)
- Nanorisk (2)
- Nanoskaliert (2)
- Nanostructure investigation (2)
- NeXus (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Neural networks (2)
- Neutron (2)
- Neutron Scattering (2)
- Nickel (2)
- Niobium (2)
- Nitric acid (2)
- Nitrides (2)
- Non-destructive testing (2)
- Non-spherical shape (2)
- Oberflächenfunktionalisierung (2)
- Oberflächengeometrie (2)
- Oberflächenprüftechnik (2)
- Organic Chemistry (2)
- Organic crystal (2)
- Osmolyte (2)
- Oxygen evolution reaction (OER) (2)
- PCA (2)
- Pair distribution function (2)
- Particle number concentration (2)
- Particle scattering simulation (2)
- Particle size and shape distribution (2)
- Passivation (2)
- Passive film (2)
- Phenolic compounds (2)
- Phosphorus (2)
- Photocuring (2)
- Physical aging (2)
- Physical and Theoretical Chemistry (2)
- Platform MaterialDigital (2)
- Platinum (2)
- Polyacrylamide (2)
- Polycarboxylate ether (2)
- Polycarboxylatether (2)
- Polyethylene Terephtalate (2)
- Polyethylene glycol (2)
- Polyglycolide (2)
- Polymer bilayer coatings (2)
- Polymer nanocomposites (2)
- Polymer of intrisic microporosity (2)
- Polymer-based nanocomposites (2)
- Polymers of Intrinsic Microporosity (2)
- Polymorphs (2)
- Polynorbornenes (2)
- Porous materials (2)
- Postfluorination (2)
- Powder X-ray diffraction (2)
- Precipitation (2)
- Prehydrated electron (2)
- Proximatanalyse (2)
- Pump-probe experiments (2)
- Quality testing (2)
- Quasi-direct damage (2)
- Quasielastic neutron scattering (2)
- Quick-EXAFS (2)
- REACH (2)
- ROPPOC (2)
- Radiation (2)
- Radical (2)
- Radical scavenger (2)
- Radioactive nanoparticle (2)
- Reactive oxygen species (2)
- Reconstructed ion chromatograms (2)
- Recycling (2)
- Reductive amination (2)
- Referenzmaterialien (2)
- Reliability (2)
- Reproducibility crisis (2)
- Reverse Monte Carlo (RMC) (2)
- Rheologie (2)
- Rietveld (2)
- Ring-opening Polymerization (2)
- Robotics (2)
- Rosin (2)
- SANS (2)
- SEC (2)
- SOP (2)
- SZ2080 negative photo-resist (2)
- Sapphire (2)
- Sc-ICP-ToF-MS (2)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (2)
- Scanning kelvin probe force microscopy (2)
- Scicat (2)
- Secondary ion mass spectrometry (2)
- Sekundärstrahlung (2)
- Selbstkalibrierung (2)
- Selective oxidation (2)
- Self-organization (2)
- Sensing (2)
- SiGe (2)
- Silane (2)
- Silica (2)
- Silica nanoparticles (2)
- Silver nanoparticle (2)
- Single cell analysis (2)
- Single crystal (2)
- Single-strand break (SSB) (2)
- Small-area XPS (2)
- SnO2 (2)
- Solid state NMR (2)
- Solubility (2)
- Starch (2)
- Starch nanoparticle (2)
- Structural anomalies (2)
- Structural inhomogenities (2)
- Structure prediction (2)
- Sulfates (2)
- Sulfidation (2)
- Surface (2)
- Surface Analysis (2)
- Surface charge (2)
- Surface morphology (2)
- Surface oxidation (2)
- Synchrotron studies (2)
- Synchrotron tomography (2)
- Syngle Crystal alloy (2)
- TCO (2)
- TGA-FTIR (2)
- TGA-MS (2)
- TKD (2)
- TRIS (2)
- Technical lignin (2)
- Temeprature scaling (2)
- Temperature (2)
- Temperature scaling (2)
- Test material (2)
- Thermoanalytical methods (2)
- Thermoanalytik (2)
- Thermoplastics (2)
- Thermoresponsive polymers (2)
- Thickness (2)
- Ti6Al4V alloy (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Time-resolved (2)
- Tin acetates (2)
- Titania (2)
- Titanium (2)
- Titanium alloy (2)
- Toxicity (2)
- Transparent Conductive Oxides (2)
- Trinkwasser (2)
- Twinning (2)
- Two photon polymerisation (2)
- Two-dimensional chromatography (2D-LC) (2)
- UV degradation (2)
- UV radiation (2)
- Ultra thin polymer films (2)
- Ultra-short pulse laser processing (2)
- Ultrakurze Laserimpulse (2)
- Uncertainties (2)
- Upconversion (2)
- Vesicles (2)
- Virus inhibition (2)
- Waschmaschine (2)
- Washing machine (2)
- Wasseraufbereitung (2)
- Water/alcohol mixtures (2)
- Workflow (2)
- X-ray Photoelectron Spectroscopy (2)
- X-ray and electron diffraction (2)
- X-ray refraction (2)
- XAFS (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- ZIF (2)
- Zahn (2)
- Zementleim (2)
- Zeolitic imidazolate framework (2)
- Zersetzungsgasanalyse (2)
- Zeta potential (2)
- ZnO nanopillars (2)
- low energy electrons (2)
- nanoparticula (2)
- 1,2,3-triazole (1)
- 1H-NMR (1)
- 2,6-diaminopyridine (1)
- 29Si (1)
- 2D (1)
- 2D Materials (1)
- 2D chromatography (1)
- 2D flakes (1)
- 2D nanomaterial (1)
- 3D FFT (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D-printing (1)
- 3d structuring (1)
- 5-hydroxynicotinic acid (1)
- 60-230V (1)
- 89Y MAS-NMR (1)
- A4F (1)
- AEMFC (1)
- AEROSIL® OX50 (1)
- AET (1)
- AFM force spectroscopy (1)
- AFM-IR (1)
- AI tool (1)
- ALD-Beschichtung (1)
- ASTM (1)
- ATZ (1)
- AZ31 (1)
- Aantimicrobial (1)
- Ab initio Simulation (1)
- Ab initio calculations (1)
- Abbildende Ellipsometrie (IE) (1)
- Ablation (1)
- Absorption edge (1)
- Absorption spectrometry (1)
- Abwasser (1)
- Accreditation (1)
- Acid corrosion (1)
- Acid resistance (1)
- Additiv (1)
- Additives (1)
- Adhesion (1)
- Adhesion by mechanical interlocking (1)
- Adhesive ALD interlayer (1)
- Adhesive strength determination (1)
- Adhesives (1)
- Adhesives - Determination (1)
- Admixtures (1)
- Advanced Oxidation (1)
- Advanced material (1)
- Advanced optics (1)
- Advanced ultrashort-laser technology (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag (1)
- Aged particles (1)
- Ageing (1)
- Aggregation (1)
- Air fragmentation (1)
- Al-based alloy (1)
- Al2O3 thin films (1)
- AlOOH (1)
- Algorithm (1)
- Alite (1)
- Alkaline brines (1)
- Alkaline earth metal (1)
- Alkoxysilanes (1)
- Alloy (1)
- Alloy 31 (1)
- Alpha (1)
- Alpha-tricalcium phosphate (1)
- Alternating co-poly(ether pyridine)s (1)
- Alumina (1)
- Alumina toughened zirconia (1)
- Aluminium alloy (1)
- Aluminium fluorides (1)
- Aluminium oxide hydroxide (1)
- Aluminium teflates (1)
- Aluminum alloys (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Amorphous calcium sulfate (1)
- Amorphous materials (1)
- Amperometry (1)
- Analyses (1)
- Analysis approach (1)
- Analysis area measurements (1)
- Analytical Chemistry (1)
- Analytical services (1)
- Analytical techniques (1)
- Anatase (1)
- Anharmonicity (1)
- Annealing (1)
- Anthracene schiff base (1)
- Antiadhesive surfaces (1)
- Antibacterial surfaces (1)
- Antibakterielle Oberflächen (1)
- Antibody Purification (1)
- Antibody purification (1)
- Anticancer (1)
- Antifouling (1)
- Antifouling surface coatings (1)
- Antifriction coefficient (1)
- Antikensammlung Berlin (1)
- Antiviral activity (1)
- Anwendung von Kohlenstoffschichten (1)
- Application (1)
- Application properties (1)
- Aqueous synthesis (1)
- Arbitrary shapes (1)
- Argon gas cluster ion sputtering (1)
- Aromatic (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Aromatic organic compounds, (1)
- Aromatic pollutants (1)
- Artefact (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Artificial Intelligence (AI) (1)
- Artificial intelligence (1)
- Artificial neural network modelling (1)
- Artificial weathering (1)
- Atom probe tomography (1)
- Atomic and Molecular Physics and Optics (1)
- Atomic fraction (1)
- Au Nanoparticles (1)
- Au nanoparticles (1)
- Au-nanocubes (1)
- Au/Ag nanoparticles, (1)
- Augenbohne (1)
- Auger Electron Spectroscopy (1)
- Auger electron spectroscopy (1)
- Austenitic steel (1)
- Automated Image Analysis (1)
- Automated Purification (1)
- BADGER film (1)
- BAM Academy (1)
- BESSY (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial lipopolysaccharides (1)
- BadgerFilm (1)
- Ball milling (1)
- Band gap (1)
- Bayesian Optimization (1)
- Bbeverages (1)
- Beamline (1)
- Benchmarking (1)
- Bending mechanism (1)
- Berliner Tuffsteinfassaden (1)
- Beschichtung (1)
- Bessel-Strahlen (1)
- Bessel-beam laser dicing (1)
- Bestimmung der Messunsicherheit (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bifunctionality (1)
- Bimetallic frameworks (1)
- Bimetallic noble metal nanoparticles (1)
- Bimodal (1)
- Bimodal size distribution (1)
- Binary zinc alloys (1)
- Binder Jetting (1)
- Bio-ceramic engineering (1)
- Bioabbaubare Polymere (1)
- Biobased (1)
- Biocomposite (1)
- Bioconjugation (1)
- Biodegradable polymers (1)
- Biofilm quantification (1)
- Biofilme (1)
- Biofilms (1)
- Biofunctional Molecules (1)
- Biogene Schwefelsäurekorrosion (1)
- Biogenic acid corrosion (1)
- Biological & biomedical applications (1)
- Biologische Anwendungen (1)
- Biomarker (1)
- Biomedical application (1)
- Biomedizin (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomimicry (1)
- Bionic materials (1)
- Biopolymers (1)
- Bioresorbable Biomaterials (1)
- Bioseparation (1)
- Biosourced isosorbide (1)
- Bipyramid (1)
- Bismuth Ferrite (1)
- Bismuth titanates (1)
- Bisphenol A (1)
- Black phosphorus (1)
- Bloch wall (1)
- Blockcopolymer (1)
- Boehmite alumina (1)
- Boehmite nanoparticles (1)
- Bonds (1)
- Bone screws (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Borosilicate Glass (1)
- Bovine serum albumin (1)
- Bragg peak (1)
- Brilliant Blue R (1)
- Broadband Dielectric Spectrscopy (1)
- Broadband dielectric microscopy (1)
- Brunauer-Emmett-Teller (1)
- Bulk material (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Bundesoberbehörden (1)
- Buried interfaces (1)
- Bystander effect (1)
- Böhmit (1)
- C++ (1)
- C-F activation (1)
- C3S (1)
- C7H15N2O4P (1)
- CALPHAD (1)
- CAT (1)
- CAT – Technology (1)
- CAT-technology (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CEN (1)
- CEO (1)
- CO2 (1)
- COF (1)
- COFs (1)
- COK-12 (1)
- Cadmium and lead remediation (1)
- Calamistrum (1)
- Calcium monofluoride (1)
- Calcium silicate hydrate (1)
- Calibration (1)
- Calibration structure (1)
- Caloric effects (1)
- Calorimetry (1)
- Cancer therapy (1)
- Cancer therapy (1)
- Cantor (1)
- Capillary electrophoresis (1)
- Carbon Nanomembranes (1)
- Carbon dioxide reduction (1)
- Carbon fibers (1)
- Carbon ions (1)
- Carbon materials (1)
- Carbon nanoparticles (1)
- Carbon storage (1)
- Carboxyl group (1)
- Carboxylative cyclization of propargyl alcohols (1)
- Carrier (1)
- Carrier protein (1)
- Cassical nucleation theory (1)
- Catalogue of Services (CoS) (1)
- Catalogue of services (1)
- Catalyst layer (1)
- Catalytic fixation of carbon dioxide (1)
- Catechol (1)
- Cationic photocuring (1)
- Causes leading to scientific misconduct (1)
- CdS (1)
- Ce0.1Zr0.9O2 nanoparticles (1)
- Ce0.25Zr0.75O2 nanoparticles (1)
- Ce0.5Zr0.5O2 nanoparticles (1)
- Ce0.75Zr0.25O2 nanoparticles (1)
- Ce0.9Zr0.1O2 (1)
- CeO2 nanoparticles (1)
- CeO2/Co3O4 (1)
- Cell (1)
- Cell appendages (1)
- Cell imaging (1)
- Cell size (1)
- Cell-envelope (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Cellulose acetate (1)
- Cellulose nanofibrils (1)
- Cement admixtures (1)
- Centrifugal Adhesion Testing (CAT) Technologie (1)
- Centrifugal Force (1)
- Centrifugal adhesion testing (CAT) (1)
- Centrifuge technology (1)
- Ceramic matrix composites (1)
- Ceramic microprinting (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Ceria (1)
- Cerium oxide (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Certified standards (1)
- Channel access (1)
- Characterization method (1)
- Charge (1)
- Charge-to-size-ratio (1)
- Chemical Bonding (1)
- Chemical Understanding (1)
- Chemical analyses (1)
- Chemical bonding (1)
- Chemical composition (1)
- Chemical heuristics (1)
- Cheminformatics (1)
- Chemisorption (1)
- Chemistry (1)
- Chemometric analysis (1)
- Chemputer (1)
- Chromatography (HIC) (1)
- Citizen Science (1)
- Clean energy technology (1)
- Clerodin (1)
- Cluster (1)
- Cmake (1)
- Co (1)
- Co-crystal (1)
- Co0.75Fe2.25O4 nanoparticles (1)
- Co1.5Fe1.5O4 nanoparticles (1)
- Co2.25Fe0.75O4 nanoparticles (1)
- Co3O4 nanoparticles (1)
- Coaggregation (1)
- Coating materials (1)
- Coatings (1)
- Cobalt (III) Schiff base complex (1)
- Cobalt and zinc oxides (1)
- Coherent exchange (1)
- Column holder (1)
- Columnar Liquid Crystal (1)
- Columnar Liquid Crystals (1)
- Columnar liquid crystals (1)
- Combinatorial peptide library (1)
- Combined corrosive and mechanical load (1)
- Combined sewer system (1)
- Command line (1)
- Command-line interface (1)
- Commercialization (1)
- Comparability (1)
- Comparability of Measurement Results (1)
- Comparative test (1)
- Compatible solute (1)
- Complementary methodology and metrology (1)
- Complex (1)
- Complex Molecular Systems (1)
- Complex-shape (1)
- Composite materials (1)
- Composite strength (1)
- Compositional complex alloys (1)
- Compositionally complex alloys (1)
- Compound semiconductors (1)
- Compound strength (1)
- Compressive Stress (1)
- Computational chemistry (1)
- Computations (1)
- Computed tomography (1)
- Computer Science Applications (1)
- Computergestützte Materialwissenschaft (1)
- Computertomographie (1)
- Concentration step (1)
- Condensed Matter Physics (1)
- Conditioning layer (1)
- Conference (1)
- Confined Columnar Liquid Crystals (1)
- Confocal microscopy (1)
- Confocal raman imaging (1)
- Conservation (1)
- Construction (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Conversion (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolymerization (1)
- Copper (1)
- Coprecipitation (1)
- Core-clusters (1)
- Core-shell nanoparticle (1)
- Core-shell nanoparticle (CSNP) (1)
- Core-shell nanoparticles (1)
- Core-shell structures (1)
- Core–shell particles (1)
- Correlative Spectroscopy (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- Corrosion testing (1)
- Corundum (1)
- Coupled corrosive and mechanial load (1)
- Coupled corrosive/mechanical load (1)
- Covalend functionalization (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- CrMnFeCoNi (1)
- Cristobalite frameworks (1)
- Cross-sectioning (1)
- Crosslinking density (1)
- Croyo-starage (1)
- Cryo-TEM (1)
- Crystal Engeneering (1)
- Crystal Orbital Hamilton Populations (1)
- Crystal growth (1)
- Crystal structure (1)
- Crystallinity (1)
- Crystallization sequence (1)
- Crystalstructure (1)
- Cu catalysts (1)
- CuNPs (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cultural heritage (1)
- Curie temperature (1)
- Curing (1)
- Curve fitting (1)
- Curved surfaces (1)
- Cycles (1)
- Cyclic (1)
- Cyclic Voltammetry (1)
- Cyclic voltammetry (1)
- Cyclisation (1)
- Cycloaddition (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cycloparaphenylenes (1)
- Cytoskeleton mimic (1)
- D7755-11 (1)
- DFT calculations (1)
- DFT calculations of Raman spectra (1)
- DIN 50989 Parts 1 – 6 (1)
- DIN EN 15870 (1)
- DIN EN ISO/IEC 17025 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DMSO (1)
- DNA structures (1)
- DNA-Binding protein (1)
- DOPO (1)
- DRIFTS (1)
- DSB (1)
- DSS (1)
- DTAB (1)
- Damping factor (1)
- Data Analysis (1)
- Data analysis round robin (1)
- Data catalog (1)
- Data corrections (1)
- Data correlation (1)
- Data fusion (1)
- Data management (1)
- Data manipulation (1)
- Data pipelines (1)
- Data processing (1)
- Data provenance (1)
- Data readiness level (1)
- Data stewartship (1)
- Databases (1)
- Datasets (1)
- Debian (1)
- Debye scattering equation (1)
- Decision support (1)
- Decorative coatings on polymer substrates (1)
- Defect Analysis (1)
- Definition (1)
- Definition of nanomaterial (1)
- Deformation (1)
- Degradation mechanisms (1)
- Degradation of polyethylene (1)
- Degradation signatures (1)
- Degradation studies (1)
- Deliberate particle implementation (1)
- Demonstration (1)
- Dendrimer (1)
- Dendritic amphiphile (1)
- Dendritic polyglycerol (1)
- Density separation (1)
- Density-based Model (1)
- Density-functional theory (1)
- Dentistry (1)
- Depolarization contrast imaging (DCI) (1)
- Depollution (1)
- Depth profiling (1)
- Depth resolved XANES (1)
- Detektion von Mikroplastik (1)
- Diagnosis (1)
- Diagnostic Antibodies (1)
- Diffusion multiples (1)
- Diffusion/diffusivity (1)
- Diffusons (1)
- Digital laboratory (1)
- Digitalization (1)
- Digitization (1)
- Dimorphs (1)
- Direct Laser Writing (1)
- Direct fluorine-metal bond (1)
- Direct laser interference patterning (1)
- Disorder (1)
- Dispersion of nano materials (1)
- Dispersive-XAS (1)
- Distribution of nanoparticles (1)
- Dodecanethiol (1)
- Domain wall (1)
- Doped ZnO nanostructures (1)
- Dose (1)
- Dosimetrie (1)
- Double complex compound (1)
- Double complex salts (1)
- Down Stream Processing (1)
- Downstream processing (1)
- Dry DNA (1)
- Drywood termite (1)
- Duplex stainless steels (1)
- Dye (1)
- Dynamic behavior (1)
- Dynamic heterogeneity (1)
- Dynamic testing (1)
- Dynamic vapor sorption (1)
- E. coli (1)
- EDS-TM002 (1)
- EIS (1)
- ELISA (1)
- EMPIR nPSize (1)
- EN 15870 (1)
- EPICS (1)
- EPMA (Electron Probe Microanalysis) (1)
- ESCA (1)
- ESI-TOF-MS (1)
- ESR (1)
- EU (1)
- Earthworms (1)
- Ectoine hydration (1)
- Editorial (1)
- Education (1)
- Elastic Crystal (1)
- Elastic membrane (1)
- Elasticity (1)
- Electric Safety Interlock (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical thin layers (1)
- Electro catalytic water splitting (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical CO2 conversion (1)
- Electrochemical Empedance Spectroscopy (EIS) (1)
- Electrochemical catalysts (1)
- Electrochemical deposition (ECD) (1)
- Electrochemical sensing (1)
- Electrochemical treatment (1)
- Electrode materials (1)
- Electrodes (1)
- Electrohpresis (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron Probe Microanalysis (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron density map (1)
- Electron probe X-ray microanalysis (EPMA) (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (1)
- Electron tomography (1)
- Electronic (1)
- Electronic structure (1)
- Electrons (1)
- Electrophoresis (1)
- Electrospun fibers (1)
- Electrospun nanocomposite fiber (1)
- Elektrolyse (1)
- Ellipsometric metrology (1)
- Ellipsometric porosimetry (1)
- Encapsulation (1)
- Endpoints (1)
- Energiedissipation im Kontakt (1)
- Energy (1)
- Energy input (1)
- Energy production (1)
- Energy systems (1)
- Enthalpy of solution (1)
- Enthalpy of sublimation (1)
- Environmental Chemistry (1)
- Environmental impacts (1)
- Epitaxy (1)
- Epoxi nanocomposites (1)
- Epoxide (1)
- Epoxy conversion degree (1)
- Epoxy-Anhydrid Duroplast (1)
- Escherichia coli (1)
- Estrogenic activity of plastic nanoparticles (1)
- Ettringen tuff (1)
- Eu (1)
- European funding strategies (1)
- Europium (1)
- Eutectic (1)
- Evaporation (1)
- Evaporite deposits (1)
- Ex-situ (1)
- Excess surface work (1)
- Exchange length (1)
- Exposed metal sites (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extrusion (1)
- F pili (1)
- FAIR (1)
- FAIRification (1)
- FLASH effect (1)
- FPLC (1)
- FT-IR (1)
- FTIR spectroscopy (1)
- Fabrication parameters (1)
- Facilitated activation (1)
- Failure pattern (1)
- Faser-Bragg-Gitter (FBG) (1)
- Fast scanning calorimeter (1)
- Fast scanning calormetry (1)
- Fatigue (1)
- Fe (1)
- Fe-Ni (1)
- Fe2O3 nanoparticles (1)
- FeNi nanoparticles (1)
- FeNi thin film (1)
- Femtosecond (1)
- Femtosecond Laser (1)
- Femtosecond laser-processing (1)
- Femtosekundenlaser (1)
- Fermi resonance (1)
- Ferrihydrite (1)
- Ferroelectric (1)
- Ferroelectricity/ferroelectric materials (1)
- Fexible crystals (1)
- Fiber Bragg grating (FBG) (1)
- Fiber toxicology (1)
- Fibers of textile origin (1)
- Fibre release (1)
- Field of View (1)
- Field of view (1)
- Filled rubbers (1)
- Filled thermosets and plastics (1)
- Filter (1)
- Filter crucible (1)
- Filters (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Fityk (1)
- Flame Retardancy (1)
- Flame retardant (1)
- Flexible (1)
- Flexible waveguide (1)
- Flexural rigidity (1)
- Flow system (1)
- Flow-System (1)
- Fluid-flow (1)
- Fluorides (1)
- Fluorinated MOFs (1)
- Fluorine Interaction (1)
- Fluorine coordination (1)
- Fluorine coordination polymers (1)
- Foaming (1)
- Focussed ion beam (1)
- Food Science (1)
- Force distance curve (1)
- Force microscopy (1)
- Force-distance-curve (1)
- Forschungsstrategie (1)
- Fraktionierte Filtration (1)
- Free electron laser (FEL) (1)
- Fuel sorption (1)
- Fuell cells (1)
- Fullerene (1)
- Fully aromatic frameworks (1)
- Functional coatings (1)
- Functional properties (1)
- Functionality type distribution (1)
- Functionalized nanographene (1)
- Funktionelle Beschichtungen (1)
- GE-XANES (1)
- Galvanotechnik (1)
- Gamma (1)
- Gamma ray (1)
- Gandolfi method (1)
- Gas flow assisted powder deposition (1)
- Gas monitoring (1)
- Gas sensors (1)
- Gas separation (1)
- Gas sorption (1)
- Gas transport (1)
- Gastrointestinal barrier (1)
- Gekrümmte Oberflächen (1)
- Gel (1)
- Gel electrolytes (1)
- General Energy (1)
- General Environmental Science (1)
- General Medicine (1)
- General Physics and Astronomy (1)
- Generator (1)
- Geology (1)
- Geothermal (1)
- Geringe Partikelfrachten (1)
- Ggraphene polymer nanocomposite (1)
- Git (1)
- Gitterfehlpassung (1)
- Glass Support (1)
- Glass powder (1)
- Glass transition temperature (1)
- Glass-ceramic (1)
- Glasses (1)
- Glassy Dynamics (1)
- Glassy polymer (1)
- Glassy polynorbornenes (1)
- Gleitlinien (1)
- Glow-discharge optical emission spectroscopy (1)
- Glucose (1)
- Glue (1)
- Glycolide (1)
- Gold Nanoparticle (1)
- Gold mit Synchrotronstrahlung (1)
- Governance (1)
- Gradient elution (1)
- Grain boundary engineering (1)
- Graphen Oxide (1)
- Graphene /-oxide (1)
- Graphene Oxide (1)
- Graphene funcionalisation (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Graphene related materials (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphite furnace (1)
- Graphs (1)
- Grating (1)
- Grazin exit XANES (1)
- Greek curse tablets (1)
- Green Chemistry (1)
- Grenzfläche als Material (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Guideline (1)
- Gypsum' SAXS (1)
- H-bonds (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HEA (1)
- HERFD-XAS (1)
- HIgh entropy, (1)
- HR-CS-MAS (1)
- HV cable accessories (1)
- Halide Perovskites (1)
- Halogen bond (1)
- Halogen bond interaction (1)
- Hamonisierung (1)
- Hard X-ray photoelectron spectroscopy (1)
- Hard magnetic materials (1)
- Hard magnets (1)
- Heat diffusion (1)
- Heating oil tanks (1)
- Heavy metals (1)
- Hematite (1)
- Hexafluorobenzen (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High Resolution (1)
- High density polyethylene (1)
- High specific surface area (1)
- High-Speed Separations (1)
- High-density polyethylene (1)
- High-pressure high-temperature (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-repetition rate ultrafast laser processing (1)
- High-resolution (1)
- High-resolution transmission electron microscopy (1)
- High-temperature fuel cells (1)
- High-throughput measurements (1)
- Highly permeable polynorbornenes (1)
- Highly permeably polynorbornenes (1)
- History (1)
- Hochdurchsatz (1)
- Hochentropie-Legierung (1)
- Holistic experiment approaches (1)
- Holzschutzmittel (1)
- Homogeneous deposition (1)
- Homogenization (1)
- Host–guest systems (1)
- Hot steam (1)
- Human Plasma (1)
- Human factor (1)
- Human influence (1)
- Human plasma (1)
- Human umbilical cell adhesion (1)
- Humidity (1)
- Hybrid metrology measurement (1)
- Hydantoin (1)
- Hydration (1)
- Hydrochemical evolution (1)
- Hydrodynamics (1)
- Hydrofluorination (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Generation (1)
- Hydrogen Storage (1)
- Hydrogen assisted cracking (1)
- Hydrogen storage (1)
- Hydrogenated nanostructures (1)
- Hydrophobic interaction (1)
- Hydrophobic interaction chromatography (1)
- Hydrophobicity (1)
- Hydrothermal synthesis (1)
- Hyperbranched polymer (1)
- Hyperspectral imaging (1)
- Härte (1)
- Härteverlauf Schweißnaht (1)
- ILC on detection methods (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- ISO 21363 (1)
- ISO 23131: 2021 (1)
- ISO/TC 201 (1)
- ISO/TC 202 Microbeam Analysis (1)
- ISO/TC229 (1)
- ISOGScope (1)
- Identification (1)
- IgG determination (1)
- Igg (1)
- ImAFM (1)
- Image Segmentation (1)
- Image manipulation (1)
- Images (1)
- Imaging Ellipsometry (1)
- Imaging ellipsometry (1)
- Imaging ellipsometry(IE) (1)
- Imaging modifizierter Oberflächen (1)
- Imaging surface chemical analysis (1)
- Imaging techniques (1)
- Immunoassay (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Impact Sensitivity (1)
- Implant material (1)
- In Situ (1)
- In situ AFM (1)
- In situ Atomic Force Microscopy (AFM) (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ XRD (1)
- In situ atomic force microscopy (1)
- In situ coupling (1)
- In situ diffraction (1)
- In-Situ Characterization (1)
- In-Situ Techniques (1)
- In-situ analysis (1)
- In-situ polymerization (1)
- In-situ scattering (1)
- Incipient plasticity (1)
- Indenter area function (1)
- Indium (1)
- Industrial application (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Inelastic background (1)
- Inelastic neutron scattering (1)
- Information Systems (1)
- Infrared nano AFM (1)
- Instrument automation (1)
- Instrument compliance (1)
- Instrument control (1)
- Instrumentation utilization (1)
- Instrumented Indentation (IIT) (1)
- Instrumented Indentation Testing (IIT) (1)
- Instrumentierte Eindringprüfung (1)
- Instrumentierte Eindringprüfung (IIT) (1)
- Insulators (1)
- Inter-lab comparison (1)
- Inter-laborator comparison (1)
- Inter-laboratory comparisons (1)
- Intercomparability (1)
- Interfacial stability (1)
- Interlaboratory comparability (1)
- Interlaboratory comparision (1)
- Interlaboratory comparisons (1)
- Intermediate phases (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Interpenetrating polymer networks (1)
- Intrinsic OER activity (1)
- Intrinsically conducting polymers (1)
- Iodine (1)
- Ion beam implantation (1)
- Ion beam therapy (1)
- Ion implantation (1)
- Ionic liquid crystal (1)
- Ionic liquid crystalls (1)
- Ionic liquid crystals (1)
- Ionisation (1)
- Iridium compounds (1)
- Iridium oxide (1)
- Iron carbide (1)
- Iron nanoparticles (1)
- Iron nanophases (1)
- Iron nitride (1)
- Iron oxide films (1)
- Iron reducing bacteria (1)
- Irreversible adsorption (1)
- Isosorbide (1)
- Janus dendrimers (1)
- K-nearest neighbor (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kalottenverfahren (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Katalysator (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Kinetics from experiments (1)
- Klassifizierung von Kohlenstoffschichten (1)
- Klebfestigkeit von Stumpfklebungen (1)
- Kleine Partikel (1)
- Knoevenagel (1)
- Knowledge (1)
- Knufia petricola (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kompaktierbarkeit (1)
- Kompressibilität (1)
- Korrosionsüberwachung (1)
- Kriechversuche (1)
- Kunststoff (1)
- Künstliche Intelligenz (1)
- L-lactide (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LCCC (1)
- LET (1)
- LEVASIL 50/50 (1)
- LIPSS (1)
- LL equation (1)
- Laboratory automation (1)
- Laboratory methodology (1)
- Laborvergleich Härte (1)
- Lacunary Keggin ion (1)
- Landau Lifshitz Gilbert equation (1)
- Landau de-Gennes analysis (1)
- Lanthanide(III) (1)
- Lanthanides (1)
- Lanthanides doped coordination polymers (1)
- Lanthanoide (1)
- Large number of participants (1)
- Large volume samplers (1)
- Large-pore (1)
- Large-scale synthesis (1)
- Laser (1)
- Laser Machining (1)
- Laser cleaning (1)
- Laser damage (1)
- Laser diffraction (1)
- Laser direct writing (1)
- Laser micromachining (1)
- Laser nanostructuring (1)
- Laser technology (1)
- Laser writing (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Laser-modified surface (1)
- Lasermaterialbearbeitung (1)
- Lasermikrobearbeitung (1)
- Lasersicherheit (1)
- Lateral resolution (1)
- Lattice enthalpy (1)
- Lattice misfit (1)
- Layer Materials (1)
- Layer-by-Layer (1)
- Lead isotopes (1)
- Lead-free ceramics (1)
- Leichtbau (1)
- Levitation (1)
- Lewis Acid (1)
- Lewis superacids (1)
- Library and Information Sciences (1)
- Lifetime analysis (1)
- Ligand exchange (1)
- Ligandsubstitution (1)
- Lignin modification (1)
- Lignosulfonate (1)
- Lignosulfonates (1)
- Linear polyglycerol (1)
- Linker (1)
- Linux (1)
- Liquid Crystal (1)
- Liquid spattering (1)
- Liquid-liquid-phase-separation (1)
- Literature survey (1)
- Lithium-ion battery (1)
- Lithium-sulfur battery (1)
- Local corrosion (1)
- Local structure (1)
- Localized surface plasmon resonance (1)
- Lokale Korrosion (1)
- Lonic liquid (1)
- Loss module (1)
- Low-contrast surface modifications (1)
- Lubricant additives (1)
- Luminescent lifetime (1)
- Luminescent materials (1)
- MALDI-TOF mass spectrometry (1)
- MAPbI3 perovskites (1)
- MAPs (1)
- MCC (1)
- MCNP (1)
- MNP production technique (1)
- MOF-74 (1)
- MOF´s (1)
- MPI (1)
- MPLS (1)
- MRT (1)
- MWCNT (1)
- Machining (1)
- Macrocycles (1)
- Magic-sized cluster (1)
- Magnesium alloys (1)
- Magnet coupling (1)
- Magnetic Nanoparticles (1)
- Magnetic anisotropy (1)
- Magnetic hyperthermia (1)
- Magnetic interacion (1)
- Magnetic nanoparticle (1)
- Magnetic swimmers (1)
- Magnetization dynamics (1)
- Magneto-optical coupling (MOC) (1)
- Magnetocoloric (1)
- Magnetoeleastic couplin (1)
- Magnetpartikel (1)
- Magnetron sputtering (1)
- Manufacturing (1)
- Martensite (1)
- Martin Seah (1)
- Mass contents (1)
- Material Science (1)
- Material characterization (1)
- Material chemistry (1)
- Material defects (1)
- Material science (1)
- Material selection (1)
- Material-binding Peptides (1)
- Materialdesign (1)
- Materials Stability (1)
- Materials Understanding (1)
- Materials acceleration platforms (MAPs) (1)
- Materials informatics (1)
- Materials testing (1)
- Matter reorganization theories (1)
- Me-TiO2 (1)
- Measurement (1)
- Measurement methodology (1)
- Measurement science (1)
- Mechanical Properties (1)
- Mechanical Sensitivity (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical characterization (1)
- Mechanical response (1)
- Mechanical testing (1)
- Mechanically flexible crystals (1)
- Mechanically flexible molecular crystals (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical pictographs (1)
- Mechanochemical syntheses (1)
- Mechanochemical synthesis (1)
- Mechanochemictry (1)
- Mechanochemie (1)
- Mechanophotonics (1)
- Median lethal energy deposit (1)
- Medical implants (1)
- Medium entropy alloy (1)
- Medizintechnik (1)
- Mehr-Proben-Prüfverfahren (1)
- Melting (1)
- Membrane (1)
- Membrane polymers (1)
- Membranes (1)
- Mesoporous Materials (1)
- Mesoporous Silica (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Mesoporous oxide materials (1)
- Mesoporous phosphate-based glasses (1)
- Messunsicherheit (1)
- Metadata (1)
- Metadata collection (1)
- Metadata structuring (1)
- Metal Organic Frameworks (1)
- Metal and alloys (1)
- Metal carbides (1)
- Metal coatings (1)
- Metal nanoparicels (1)
- Metal oxides (1)
- Metal reducing bacteria (1)
- Metal-organic frameworks (MOFs) (1)
- Metal-organic polyhedra (1)
- Metal-oxides (1)
- Metal-semiconductor (1)
- Metallographie (1)
- Metallschichten (1)
- Metals (1)
- Metal−organic frameworks (1)
- Methanogen (1)
- Method development (1)
- Method validation (1)
- Methoxytrimethlsilane (1)
- Methyl group rotation (1)
- Metrics (1)
- Metrological traceability (1)
- Metrology in Chemistry and Biology (1)
- Mg alloys (1)
- Micelle (1)
- Micro- and Nanoplastics (1)
- Microarray printing (1)
- Microbial (1)
- Microbial adhesions (1)
- Microbial induced corrosion (1)
- Microbiological Corrosion (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microcracks (1)
- Microdroplet (1)
- Microencapsulation (1)
- Microfabrication (1)
- Microfluidic (1)
- Microfluidics (1)
- Micromanipulation (1)
- Micropatterned dry adhesive (1)
- Microplastic fibre release (1)
- Microplastic mass (1)
- Microplastic mass contents (1)
- Microplastic particles (1)
- Microplastic pathways (1)
- Microplastic pollution (1)
- Microplastic reference materials (1)
- Microplastics detection (1)
- Microplastics in milk (1)
- Microplastics in soil (1)
- Microplastics reference material (1)
- Microplastics sampling (1)
- Microporous polymers (1)
- Microstructure Design (1)
- Microstructure-property relations (1)
- Mikroplasik (1)
- Mikroplastik Böden (1)
- Mikroplastik in Luft (1)
- Mikroplastik-Analyse (1)
- Mikroplastikreferenzmaterial (1)
- Mikrostrukturen (1)
- Mild steel (1)
- Minerals (1)
- Mitochondria (1)
- Mixed Matrix Membrane (1)
- Mixed Oxides (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Mixed-linkers (1)
- MoO3 (1)
- Modeling (1)
- Modification (1)
- Modulus (1)
- Moisture (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular Dynamics (1)
- Molecular Mobility (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular mass distribution (1)
- Molecular recognition (1)
- Molybdenum (1)
- Monitoring (1)
- Monoclonal Antibodies (1)
- Monolith (1)
- Monte carlo (1)
- Monte-Carlo (1)
- Monte-Carlo Simulationen (1)
- Monte-Carlo Simulations (1)
- Morpho-chemical characterization (1)
- Morphogenesis (1)
- Morphology control (1)
- Motor controller (1)
- Mueller-Matrix Ellipsometry (1)
- Multi-core particles (1)
- Multi-functional coatings for sensors (1)
- Multi-method analysis (1)
- Multi-photon light structuring (1)
- Multi-principal element alloys (1)
- Multi-principal element alloys (MPEAs) (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multi-resistant bacteria (1)
- Multi-scale (1)
- Multi-scale measurements (1)
- Multicomponent (1)
- Multielectrode (1)
- Multilayercoatings (1)
- Multiphoton laser structuring (1)
- Multiple-sample bonding (MSB) (1)
- Multiple-sample handling (MSH) (1)
- Multiport (1)
- Multiscale simulation (1)
- Multivalency (1)
- Multivariate data analysis (1)
- Mussel inspired materials (1)
- Mussel-inspired adhesive systems (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- MySpot (1)
- Mössbauer Spectroscopy (1)
- Müller-Matrix Ellipsometrie (MM-IE) (1)
- NMR (1)
- NMR probe Development (1)
- NMR spectroscopy (1)
- NMR-Spektroskopie (1)
- NaI (1)
- Nafion 117 (1)
- Naica (1)
- Nano CRM (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano particle (1)
- Nano particles (1)
- Nano screening (1)
- Nano structure (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-characterisation (1)
- Nano-object (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoCAM (1)
- NanoValid (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanobiointerfaces (1)
- Nanocarrier (1)
- Nanocasting (1)
- Nanocomposite fibers (1)
- Nanocubes (1)
- Nanodielectrics (1)
- Nanodosimetry (1)
- Nanokomposit (1)
- Nanomaterial Properties (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial legislation (1)
- Nanomaterial properties (1)
- Nanomaterial regulation (1)
- Nanomaterial screening (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanoparticle Characterization (1)
- Nanoparticle size distribution (1)
- Nanoparticle size measurement (1)
- Nanoparticle synthesis (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanopartikel (1)
- Nanopipette modification (1)
- Nanoplatform (1)
- Nanoplattform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanopowder (1)
- Nanopropous materials (1)
- Nanorisk Governance (1)
- Nanorods (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale measurements (1)
- Nanoscience (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanosilver (1)
- Nanostrcutures (1)
- Nanostructured FeOx films (1)
- Nanostrukturen (1)
- Nanotechnologie (1)
- Nanotechnologies (1)
- Native oxide layer (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Near-field spectroscopy (1)
- Neel wall (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Neutron backscattering (1)
- Ni (1)
- NiMaGa (1)
- Nickel nanoparticles (1)
- Niedrigenergie-Polymeren (1)
- Nitrene[2+1]cycloaddition (1)
- Nitrification (1)
- Nitrobenzene reduction (1)
- Nitrogen (1)
- Nobel-metal free electrocatalysis (1)
- Nomenclature (1)
- Non-destructiv testing (1)
- Non-destructive ambient analysis (1)
- Non-destructuve testing (1)
- Non-spherical nanoparticles (1)
- Nonclassical crystallization (1)
- Noncovalent interactions (1)
- Nondestructive testing techniques (1)
- Nonlinear lithography (1)
- Nonlinear optics (1)
- Nonspecific binding (NSB) (1)
- Normung Ellipsometrie (1)
- Nuclear Energy and Engineering (1)
- Nuclear magnetic resonance (1)
- Nucleus (1)
- Numerical simulations (1)
- OECD (1)
- OECD TG 125 (1)
- OH (1)
- OMS (1)
- Oberflächenmodifikation (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Oberflächenstrukturierung (1)
- Ochratoxin A (1)
- One-pot synthesis (1)
- Open Science (1)
- Open data on zenodo (1)
- Ophthalmology (1)
- Optical Constants (1)
- Optical analysis (1)
- Optical and Magnetic Materials (1)
- Optical assay (1)
- Optical birefringence (1)
- Optical characterization (1)
- Optical fibers (1)
- Optical films (1)
- Optical measurement technology (1)
- Optical measurements (1)
- Optical near field (1)
- Optical porosimetry (1)
- Optical scattering (1)
- Optical spectroscopy (1)
- Optical waveguides (1)
- Optically active surfaces (1)
- Optische Konstanten (1)
- Oral uptake (1)
- Ordered mesoporous carbon (1)
- Ordered mesoporous silica (1)
- Organic compounds (1)
- Organic phosphates (1)
- Organic-inorganic adsorbents (1)
- Organic/inorganic block copolymer (1)
- Orientation (1)
- Origin (1)
- Osmium (1)
- Osteogenesis (1)
- Oxocobaltates (1)
- Oxygen Evolution Catalyst (1)
- Oxygen reduction reaction (1)
- P25 (1)
- PC characterisation (1)
- PES (1)
- PIM-1 (1)
- PLA (1)
- PQQ (1)
- PU Learning (1)
- PUR (1)
- PVD-coatings (1)
- PVD-processes (1)
- PVDF (1)
- PVDF-Based membrane (1)
- PVME (1)
- Pair Distribution Functions (1)
- Paper mills (1)
- Paramagnetism (1)
- Particale size (1)
- Participatory Approach (1)
- Particle accretion (1)
- Particle architecture (1)
- Particle scatterin simulations (1)
- Particles as add-on features (1)
- Particles as imperfections (1)
- Particulate distributions (1)
- Partikelgrößenverteilung (1)
- Passive films (1)
- Pb isotopes (1)
- Pelletization (1)
- Pentafluoropyridine (1)
- Peptide (1)
- Peptide Library (1)
- Peptide binder (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance check (1)
- Pergamonmuseums (1)
- Periodate oxidation (1)
- Permeation (1)
- Pflanzenvirus (1)
- PhD training (1)
- Phantome (1)
- Pharmaceuticals (1)
- Pharmacy (1)
- Phase mask (1)
- Phase stability (1)
- Phase-contrast microscopy (1)
- Phonon interactions (1)
- Phosphate (1)
- Phosphine oxide (1)
- Phosphinine (1)
- Phosphonate esters (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Phosphorylated Algae (1)
- Phosphorylated lignin (1)
- Photoelectrochemistry (1)
- Photoluminescence (1)
- Photons (1)
- Photophysics (1)
- Photoreforming (1)
- Photovoltaik (1)
- Physical Aging (1)
- Physical and theoretical chemistry (1)
- Physicochemical characterization (1)
- Physics and Astronomy (miscellaneous) (1)
- Piezoresponse (1)
- Pitfalls (1)
- Plant virus (1)
- Plasma Polymerization (1)
- Plasma Polymers (1)
- Plasma activation (1)
- Plasma deposition (1)
- Plasma diagnostics (1)
- Plasma treatments (1)
- Plasma-assisted ALD modification (1)
- Plasmon resonance (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Plasmonic photocatalysis (1)
- Plastic bottles (1)
- Plastic deformation (1)
- Plastic reference materials (1)
- PlasticEurope (1)
- PlasticTrace (1)
- Plasticity (1)
- Plasticity mechanism (1)
- Plastics (1)
- Plastikstrategie (1)
- Platinum group metals (1)
- Platinum-ruthenium colloid (1)
- Polarimetry (1)
- Polarization (1)
- Polarization spectroscopy (1)
- Pollution (1)
- Poly(acrylic acid) (1)
- Poly(amino phosphodiester) (1)
- Poly(ether-phosphoramide)s sulfides (1)
- Poly(ether-sulfone) (1)
- Poly(lactides) (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polycarboxylate ether (PCE), (1)
- Polyclonal Antibodies (1)
- Polydispersity (1)
- Polyelektrolyt (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polylactides (1)
- Polylaktid (1)
- Polylaktide (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer analysis/characterization (1)
- Polymer based Nanocomposites (1)
- Polymer composites (1)
- Polymer degradation (1)
- Polymer electrolyte fuel cell (1)
- Polymer film (1)
- Polymer foils (1)
- Polymer membranen (1)
- Polymer nanocomposite (1)
- Polymer of Intrisic Maicroporosity (1)
- Polymer of intrinsic microporosity (1)
- Polymer size (1)
- Polymer-binding Peptides (1)
- Polymer-ceramic mixtures (1)
- Polymere (1)
- Polymeric membrane (1)
- Polymers and Plastics (1)
- Polymers of intrinsic Microporosity (1)
- Polymers with intrinic microporosity (1)
- Polymorphy (1)
- Polynorbornes (1)
- Polyoxometalates (1)
- Polystyrene microparticles (1)
- Polyurethane acetate vinyl acrylate (1)
- Polyurethanes (1)
- Polyvinyl alcohol (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Pore orientation (1)
- Pore size tailoring (1)
- Pore space (1)
- Pore structure (1)
- Porosity (1)
- Porous carbon (1)
- Porous carbons (1)
- Position of carboxylate group (1)
- Post-modification by L-cysteine (1)
- Poster presentation (1)
- Postsynthetic modification (1)
- Powder (1)
- Power Electronics (1)
- Power electronics (1)
- Pphosphates (1)
- Ppolyethylene (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Prediction (1)
- Prediction relative (1)
- Preferred orientation (1)
- Preparation (1)
- Presolvated electron (1)
- Primer (1)
- Principal Component Analysis (1)
- Principle component analysis (1)
- Procedure (1)
- Process analytical technology (1)
- Process control (1)
- Propolis (1)
- Protection housing (1)
- Protein A (1)
- Protein Purification (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein structure (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Prozessanalytik (1)
- Prozesskontrolle (1)
- Prüfgeschwindigkeiten (1)
- Prüftechnik (1)
- Pseudo-translationalsublattices (1)
- Pseudomonas aeruginosa (1)
- Pseudomonas fluorescens (1)
- Pull-off test (1)
- Pulse Laser (1)
- Pulsed laser ablation (1)
- Pump-probe (1)
- Py-GC/MS (1)
- QUASES (1)
- Quality Control (1)
- Quality control (1)
- Quality infrastructure (1)
- Quantitative surface chemical analysis (1)
- Quantum Chemistry (1)
- Quantum Dots (1)
- Quantum chemical bonding analysis (1)
- Quantum dot (1)
- Quantum mechanics (1)
- Quartz nanopipettes (1)
- Quarzglas (1)
- Quasi-harmonic approximation (1)
- Quick-XAS (1)
- RAMAN (1)
- RBE (1)
- RNA (1)
- RUSEKU (1)
- RXES (1)
- Radical Scavenge (1)
- Radioactive NP (1)
- Radiografische Untersuchung (1)
- Raman Spectroscopy (1)
- Rare earth elements separations (1)
- Rauheit (1)
- Re-crystallization (1)
- Reactions (1)
- Reactive sputtering (1)
- Real-time infrared spectroscopy (1)
- Recycling-by-design (1)
- Reference Method (1)
- Reference Nanomaterials (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Reference products (1)
- Reference samples (1)
- Reference standards (1)
- Reference structure (1)
- Refractory alloys (1)
- Regeneration (1)
- Regional workshop (1)
- Reibungsreduktion (1)
- Reifenabrieb (1)
- Reliable characterization (1)
- Renewable Energy (1)
- Renewable Energy, Sustainability and the Environment (1)
- Renewable copolymers (1)
- Repelling surface coatings (1)
- Representative morphology modeling (1)
- Research ethics (1)
- Resins (1)
- Resonance (1)
- Reverse Monte Carlo (1)
- Reversible Hydrogen Storage (1)
- Reversible adsorption. (1)
- Rh-Ir alloys (1)
- Rhodiumcomplexes (1)
- Ridis amorphous fraction (1)
- Rigid (1)
- Ringversuch (1)
- Ringversuch Ellipsometrie (1)
- Ringversuche (1)
- Risk Governance (1)
- Risk asessment (1)
- Risstrajektorie (1)
- Roadmap (1)
- Robocasting (1)
- Robotic synthesis (1)
- Robotic-supported synthesis (1)
- Robust nano objects (1)
- Robustness (1)
- Rod-like liquid crystals (1)
- Roughness (1)
- Round Robin (1)
- Round robin test (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SDLs (1)
- SDS-PAGE (1)
- SEM micrography (1)
- SEM/EDS/STRATAGem (1)
- SKPFM (1)
- SKPM (1)
- SLS (1)
- SPR (1)
- SSB (1)
- STEM-in-SEM (1)
- STEM-in-SEM (TSEM) (1)
- STL file input (1)
- Sabatier (1)
- Safe-by-design (1)
- Salicylate (1)
- Saline brine (1)
- Sall-angle scattering (1)
- Sample peparation (1)
- Saphir (1)
- Saponite (1)
- Scaffold (1)
- Scannig probe microscope (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning Probe Microscopy (1)
- Scanning Probe methods (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning probe measurements (1)
- Scanning probe microscopy (1)
- Scanning transmission X-ray microscopy (STXM) (1)
- Scattering pattern (1)
- Scattering pattern simulation (1)
- Schichtdicke (1)
- Schichtdicken (1)
- Schlangenbohne (1)
- Schriftrollen vom Toten Meer (1)
- SchwarzP cells (1)
- Scientific misconduct (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Segregation Engineering (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Self-degrading (1)
- Self-driving-labs (1)
- Self-healing (1)
- Self-healing silicone rubber (1)
- Self-lubricating coating (1)
- Semi-Interpenetrating Network (1)
- Semi-interpenetrating networks (1)
- Semiconductor (1)
- Semiconductor nanocrystals (1)
- Semiconductors (1)
- Sensorvalidierung (1)
- Separability assumption (1)
- Separate sewer system (1)
- Separation (1)
- Separation membranes (1)
- Sequential spectroscopic data (1)
- Service life (1)
- Shape-controlled (1)
- Shape-memory alloys (1)
- Shell (1)
- Short chained Phthalates (1)
- Short chained phthalates (1)
- Short range order (1)
- Si wafer filter (1)
- Si-Ge (1)
- Siderite (1)
- Silanes (1)
- Silanisation (1)
- Silanization (1)
- Silbernanopartikel (1)
- Silica gel modification (1)
- Silica particles (1)
- Silicone elastomer (1)
- Silk (1)
- Sillver (1)
- Silver (1)
- Simulations (1)
- Simvastatine (1)
- Single particle (1)
- Single source precursors (1)
- Singulettsauerstoff (1)
- Sintered Material (1)
- Sintering (1)
- Size and size distribution (1)
- Size measurement (1)
- Size measurements (1)
- Size-exclusion chromatography (SEC) (1)
- Slicers (1)
- Sliding (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle X-ray Scattering (1)
- Small-spot XPS (1)
- Smart materials (1)
- Soda lakes (1)
- Sodium carbonate minerals (1)
- Soft-templated (1)
- Software UNIFIT 2022 (1)
- Soil (1)
- Sol-gel synthesis (1)
- Solar concentrator (1)
- Solar energy (1)
- Solarpur (1)
- Solid phase (1)
- Solid-binding Peptides (1)
- Solid-phase extraction (SPE) (1)
- Sonochemical synthesis (1)
- Sorption isotherm (1)
- Sorption mechanism (1)
- Specific Surface Area (BET) (1)
- Specific heat spectroscopx (1)
- Spectral induced polarization (1)
- Spectroscopic Imaging (1)
- Spectroscopic ellipsometry (SE) (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spektrale Ellipsometrie (SE) (1)
- Spektroskopie (1)
- Spin (1)
- Spin-lattice coupling (1)
- Spirocyclic (1)
- Spontaneous emulsification (1)
- SrF2 (1)
- Stacking fault energy (1)
- Stainless Steel (1)
- Stakeholder (1)
- Standard Operation Procedures (1)
- Standard operation procedures (1)
- Standardarbeitsanweisung (1)
- Standardisierung (1)
- Standardization of Ellipsometry (1)
- Standardization of ellipsometry (1)
- Standardized check (1)
- Static light scattering (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Statistischen Untersuchung (1)
- Steels (1)
- Stereocomplex (1)
- Stimuli-responsive polymers (1)
- Stochastic Landau Lifshitz equation (1)
- Storage module (1)
- Stormwater retention tank (1)
- Strahlentherapie (1)
- Strategy and Management (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural Health Monitoring (SHM) (1)
- Structural Materials (1)
- Structural characterisation (1)
- Structural color (1)
- Structural control (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (SHM) (1)
- Structural phase transition (1)
- Structural precision (1)
- Structural sealant glazing (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure-mechanical property correlation (1)
- Structure-property relationship (1)
- Structures under extreme conditions (1)
- Structure–property correlation (1)
- Stuccos (1)
- Stumpfklebungen (1)
- Sulfated materials (1)
- Sulfur (1)
- Sulfur cathodes (1)
- Sulphidation (1)
- Sulphuric acid (1)
- Superconductivity (1)
- Superior sorbent (1)
- Superparamagnetism (1)
- Supramolecular chemistry (1)
- Supramolecules (1)
- Surface Activation (1)
- Surface Analysis Working Group (1)
- Surface Chemical Transformation (1)
- Surface characterization (1)
- Surface chemisttry (1)
- Surface coating (1)
- Surface engineering (1)
- Surface morphology and chemistry (1)
- Surface plasmon polaritons (1)
- Surface plasmon resonance (1)
- Surface plasmon resonance enhanced ellipsometry (SPREE) (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface-initated grafting (1)
- Surfaces, Coatings and Films (1)
- Sustainability and the Environment (1)
- Sustainable Synthesis (1)
- Sustainable chemisry (1)
- Suzuki-Miyaura coupling (1)
- Swell-capture (1)
- Synchrotron CT (1)
- Synthesis library (1)
- Synthesizability (1)
- System method (1)
- Systems architecture (1)
- TOPAS-nBio (1)
- TPU (1)
- TRIP Steel (1)
- TRL (1)
- TSEM (1)
- TWIP Steel (1)
- TXRF-XAS (1)
- Tara Mediterranee (1)
- Targeted nanoparticle (1)
- Technical Lignin (1)
- Technische Materialien (1)
- Temparatur modulated Flash DSC (1)
- Temperature dependent ellipsometry (1)
- Temperature effects (1)
- Temperature modulated DSC (1)
- Temperature modulated differential scanning calorimetry (1)
- Temporal beam shaping for precision machining (1)
- Tensile Stress (1)
- Tensile and cmpressive stress testing (1)
- Tensile strength of coatings (1)
- Tensile strength of laminates (1)
- Tensile testing machine (TTM) (1)
- Termites (1)
- Ternary zinc alloys (1)
- Terpolymer (1)
- Test artifact (1)
- Test structure (1)
- Tetraethyl orthosilicate (1)
- Textile binder (1)
- Textile company (1)
- Textile fibres (1)
- Themal Transitions (1)
- Theoretical modelling (1)
- Theory (1)
- Therapeutic Antibodies (1)
- Thermal Properties (1)
- Thermal analysis (1)
- Thermal annealing (1)
- Thermal conductivity (1)
- Thermal desorption analysis (1)
- Thermal desorption mass spectrometry (1)
- Thermal expansion (1)
- Thermal extraction-desorption gas chromatography mass spectrometry (1)
- Thermal süectroscopy (1)
- Thermal transport (1)
- Thermally treated sludge (1)
- Thermo-desorption (1)
- Thermo-responsive polymers (1)
- Thermoanalytische Verfahren (1)
- Thermochemistry (1)
- Thermodynamic Properties (1)
- Thermogravimetry (1)
- Thermomagnetic material (1)
- Thermoplastic Polyurethane (1)
- Thermoset composition (1)
- Thermosets (1)
- Thetaevolve (1)
- Thin Layers (1)
- Thin Polymer Layers (1)
- Thin epoxy-based films (1)
- Thin film (1)
- Thin film analysis (1)
- Thin film systems (1)
- Thin mesoporous films (1)
- Thiols (1)
- Threshold (1)
- Thumor therapy (1)
- Ti-6Al-4V alloy (1)
- Ti-based colloids (1)
- Ti6Al4V alloys (1)
- TiO2 D540 nanoparticles (1)
- TiO2 PVP (1)
- TiO2 nanoparticle (1)
- TiO2 nanoparticles (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-Flight secondary ion mass spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Tin catalysts (1)
- Tin(II)octanoate (1)
- Tire wear (1)
- Titanium alloys (1)
- Titanium oxide (1)
- ToF SIMS (1)
- Tomography (1)
- Tools (1)
- Tools to combat scientific misconduct (1)
- Topas-nbio (1)
- TopasMC (1)
- Topometric characterization (1)
- Topometry (1)
- Topotactic phase transitions (1)
- Total scattering (1)
- Total scattering analysis (1)
- Traceability derivation (1)
- Traceable nanoparticle size measurements; (1)
- Transformation pathways (1)
- Transition electron microscopy (1)
- Transition-metal doped (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transmissionselektronenmikroskopie (1)
- Transparency (1)
- Transparent conductive Oxides (1)
- Transpassive dissolution (1)
- Trends (1)
- Triazine (1)
- Tribochemistry (1)
- Tungsten (1)
- Twin orientation relationship (1)
- Twin-screw extrusion (TSE) (1)
- Two photon polymerization (1)
- Two-Photon Polymerization (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Two-photon adsorption (1)
- Two-photon polymerisatio (1)
- Tyrosine (1)
- UCST polymers (1)
- UCST-type polymers (1)
- UPLC (1)
- UV Weathering (1)
- UV exposure (1)
- UV-curing (1)
- UV-irradiation (1)
- Ultrafast scattering (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultrashort (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser (1)
- Uncertainty budget (1)
- Unintended particle generation (1)
- Up-cycling (1)
- Upscaling (1)
- VMAAS (1)
- VOx catalyst (1)
- VRFB (1)
- Validation concepts of ellipsometric measurements (1)
- Validierung (1)
- Van der Waals forces (1)
- Vanadium speciation (1)
- Variable excitation (1)
- Variable temperature (1)
- Vergleichsuntersuchungen (1)
- Vergleichsversuche (1)
- Verschleißreduktion (1)
- Vickers hardness (1)
- Video (1)
- Vigna unguiculata (1)
- Vinyl monomer (1)
- Virucidality (1)
- Visco-elastic (1)
- Volatiles from thermosets (1)
- Volcano plot (1)
- Volume processing, waveguide writing (1)
- Volume specific surface area (1)
- Wasserstoff (1)
- Waste heat recovery (1)
- Wastewater (1)
- Wastewater flame retardants (1)
- Water (1)
- Water atmosphere (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water management (1)
- Water samples (1)
- Water stability (1)
- Water treatment (1)
- Waxs (1)
- Weathering (1)
- Weibern tuff (1)
- Weißlichtinterferenzmikroskopie (WLIM, 3D) (1)
- Welding (1)
- White Light Interference Microscopy (1)
- White light interference microscopy(WLIM) (1)
- White light interferometric microscopy (1)
- White light interferometry microscopy (1)
- White-light Interference Microscopy (1)
- Wide-bandgap semiconductors (1)
- Wide-range (1)
- Wood (1)
- Writing (1)
- X-Ray Imaging (1)
- X-Ray Reflectometry (1)
- X-Ray Spectroscopy (1)
- X-Ray imaging (1)
- X-ray Photoelectron Spectroscopy (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Fluorescence (1)
- X-ray Photoelectron Spectroscopy (XPS) (1)
- X-ray absorption near edge structure (XANES) (1)
- X-ray crystal analysis (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray fluorescence spectroscopy (1)
- X-ray generation (1)
- X-ray hazards during ultrafast laser processing (1)
- X-ray imaging (1)
- X-ray instrumentation (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray microscopy (1)
- X-ray photoelectron (1)
- X-ray photoelectron spectroscopy (XPS) (1)
- X-ray production efficiency (1)
- X-ray spectrometer (1)
- X-ray spectroscopic techniques (1)
- X-ray spectrum (1)
- X-ray tomographic (1)
- X-rays (1)
- XCT (1)
- XPS spctroscopy (1)
- XUV scattering (1)
- Xerogel (1)
- Xpoxy resin (1)
- Young´s modulus (1)
- Yttria-stabilized zirconia (1)
- Yttrium silicates (1)
- Zeolites (1)
- Zeolithe (1)
- Zeolitic Imidazolate Frameworks (1)
- Zinc catalyst (1)
- Zinc oxide nanoparticles (1)
- Zinc phosphate (1)
- Zink phytate (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- ZnO films (1)
- ZnO nanoparticles (1)
- ZnO nanorods (1)
- ZnO nanorods Nanocrystalline (1)
- ZnSe (1)
- ZrO2 nanoparticles (1)
- Zugprüfung mittels Zentrifugentechnologie (1)
- Zugprüfung mittels Zugprüfmaschine (1)
- Zweistichproben t Test: (ZPM) (1)
- Zyklen (1)
- [MMIM]+[DMP]− (1)
- abasic side (1)
- analytical service (1)
- attraktive Wechelwirkung (1)
- automation (1)
- base loss (1)
- clustered nanoparticles (1)
- corrosion (1)
- dielectric spectroscopy (1)
- dsDNA (1)
- electron microscopy (1)
- gamma ray (1)
- gas separation membranes (1)
- gold (1)
- graphene related 2D materials (1)
- high entropy alloys (1)
- instrument utilization (1)
- laboratory automation (1)
- laboratory management (1)
- mechanical properties (1)
- metadata collection (1)
- molecular mobility (1)
- nanoindentation (1)
- oxidation (1)
- oxidative stress (1)
- performance test (1)
- polymers (1)
- polymers of intrinsic microporosity (1)
- polynorbornenes (1)
- product specification (1)
- radiolysis (1)
- research efficiency (1)
- ring-expansion polymerization (1)
- scanning electron microscopy (1)
- shape control (1)
- stl code (1)
- sulfidation (1)
- temeprature dependent exchange length (1)
- total scattering (1)
- transmission mode (1)
- uncertainty (1)
- µ-CT (1)
- µ-FTIR (1)
- µ-Raman (1)
- µ-XRF (1)
- µ-contact printing (1)
- Ägyptisches Museum Berlin (1)
- Δμ XANES (1)
Organisationseinheit der BAM
- 6 Materialchemie (1605) (entfernen)
Paper des Monats
- ja (15)
A series of different nanoparticle suspensions (Gold, Latex, and SiO2 in varying concentrations) were microprinted onto TEM grids in a 4 x 4 array in the concentration range 7x10^8 to 1x10^11 NP/mL and imaged with SEM and TSEM. Concentrations and printing conditions (temperature, relative humidity) were varied in order to minimize the coffee ring effect.
Clustering of magnetic nanoparticles can drastically change their collective magnetic properties, which in turn may influence their performance in technological or biomedical applications. Here, we investigate a commercial colloidal dispersion (FeraSpinTMR), which contains dense clusters of iron oxide cores (mean size around 9 nm according to neutron diffraction) with varying cluster size (about 18–56 nm according to small angle x-ray diffraction), and its individual size fractions (FeraSpinTMXS, S, M, L, XL, XXL). The magnetic properties of the colloids were characterized by isothermal magnetization, as well as frequency-dependent optomagnetic and AC susceptibility measurements. From these measurements we derive the underlying moment and Relaxation frequency distributions, respectively. Analysis of the distributions shows that the clustering of the initially superparamagnetic cores leads to remanent magnetic moments within the large clusters. At frequencies below 105 rad s−1, the relaxation of the clusters is dominated by Brownian (rotation) relaxation. At higher frequencies, where Brownian relaxation is inhibited due to viscous friction, the clusters still show an appreciable magnetic relaxation due to internal moment relaxation within the clusters. As a result of the internal moment relaxation, the colloids with the large clusters (FSL, XL, XXL) excel in magnetic hyperthermia experiments.
We here explore how ball-mill-grinding frequency affects the kinetics of a disulfide exchange reaction. Our kinetic data show that the reaction progress is similar at all the frequencies studied (15–30 Hz), including a significant induction time before the nucleation and growth process starts. This indicates that to start the reaction an initial energy accumulation is necessary. Other than mixing, the energy supplied by the mechanical treatment has two effects: (i) reducing the crystal size and (ii) creating defects in the structure. The crystal-breaking process is likely to be dominant at first becoming less important later in the process when the energy supplied is stored at the molecular level as local crystal defects. This accumulation is taken here to be the rate-determining step. We suggest that the local defects accumulate preferentially at or near the crystal surface. Since the total area increases exponentially when the crystal size is reduced by the crystal-breaking process, this can further explain the exponential dependence of the onset time on the milling frequency.
We demonstrate here using a disulfide system the first example of reversible, selective, and quantitative transformation between three crystalline polymorphs by ball mill grinding. This includes the discovery of a previously unknown polymorph. Each polymorph is reproducibly obtained under well-defined neat or liquid-assisted grinding conditions, revealing subtle control over the apparent thermodynamic stability. We discovered that the presence of a contaminant as low as 1.5% mol mol−1 acting as a template is required to enable all these three polymorph transformations. The relative stabilities of the polymorphs are determined by the sizes of the nanocrystals produced under different conditions and by surface interactions with small amounts of added solvent. For the first time, we show evidence that each of the three polymorphs is obtained with a unique and reproducible crystalline size. This mechanochemical approach gives access to bulk quantities of metastable polymorphs that are inaccessible through recrystallisation.
Using solid catalysts in disulfide-based dynamic combinatorial solution- and mechano-chemistry
(2022)
We here show for the first time that solid amines can act as catalysts for disulfide-based dynamic combinatorial chemistry by ball mill grinding. The mechanochemical Equilibrium for the two disulfide reactions studied is reached within one to three hours using ten different amine catalysts. This contrasts with the weeks to months to achieve solution equilibrium for most solid amine catalysts at 2%M at 2mM concentration in a suitable solvent. The final mechanochemical equilibrium is independent of the catalyst used, but varies with other ball mill grinding factors such as the presence of traces of solvent. The different efficiencies of the amines tested are discussed.
Thermo-Desorption Gas Chromatography-Mass Spectrometry (TD-GC-MS) was used to investigate the thermal degradation of two different polyurethanes (PU). PU samples were heated at different heating rates and the desorbed products were collected in a cold injection system and thereafter submitted to GC-MS. Prospects and limitations of the detection and quantification of semi-volatile degradation products were investigated. A temperature dependent PU depolymerization was
found at temperatures above 200 °C proved by an increasing release of 1,4-butanediol and methylene diphenyl diisocyanate (MDI) representing the main building blocks of both polymers. Their release was monitored quantitatively based on external calibration with authentic compounds. Size Exclusion Chromatography (SEC) of the residues obtained after thermodesorption confirmed the initial competitive degradation mechanism indicating an equilibrium of crosslinking and depolymerization as previously suggested. Matrix-Assisted Laser Desorption Ionization (MALDI) mass spectrometry of SEC fractions of thermally degraded PUs provided additional hints on degradation mechanism.
In Glasfasern eingeschriebene Bragg-Gitter (FBG: fibre-based Bragg gratings) sind über die Verschiebung der Bragg-Wellenlänge in der Lage, Stauchungen und Dehnungen von Glasfasern hochgenau zu erfassen. In Kompositwerkstoffe eingebettete faseroptische Sensoren können Bauteile bezüglich ihrer mechanischen Integrität überwachen und früh-zeitig Informationen über Materialveränderungen gewinnen.
Um die Zuverlässigkeit eines solchen Sensors zu gewährleisten, ist es wichtig, die korrekte Funktion des Sensors im Verbund mit der Werkstoff-Matrix on-line und in-situ sicherzu-stellen. Im Rahmen des DFG-Projekts FAMOS² (FAser-basierter Magneto-Optischer SchichtSensor) wurde ein selbstdiagnosefähiger Schichtsensor entwickelt, der mit Hilfe von magnetostriktiven Aktorschichten aus Nickel bzw. Eisen-Nickel validiert werden kann.
Der FAMOS²-Schichtsensor wird durch ein PVD (physical vapour deposition)/ECD (electro-chemical deposition) Hybridschichtsystem realisiert, das auf dem Fasermantel im Bereich des FBG haftfest, homogen und langzeitfunktional abzuscheiden ist. Dabei wird in einem ersten Schritt ein etwa 100 Nanometer dünnes PVD-Schichtsystem aus Chrom und Kupfer als Haftvermittler auf der Glasfaser bzw. als leitfähige Startschicht für den nachfolgenden ECD-Prozess abgeschieden. Um eine rotationssymmetrische Schich-tabscheidung zu gewährleisten, erfolgt während der PVD-Beschichtung eine Rotation der Glasfasern. In einem zweiten Schritt wird dann unter Verwendung eines klassischen Watts-Elektrolyten in einer speziell entwickelten ebenfalls rotationssymmetrisch aufgebau-ten ECD-Durchströmungszelle dann die etwa 30 Mikrometer dicke, magnetostriktive Ak-torschicht auf dem PVD-Schichtsystem abgeschieden, im Vergleich sowohl reine Nickel-Schichten als auch Nickel-Eisen-Schichten.
Ein äußeres Magnetfeld dehnt die magnetostriktive Aktorschicht und damit auch die Faser reversibel. Diese Dehnung führt zu einer Verschiebung der Bragg-Wellenlänge, welche direkt mit der Stärke eines zu messenden oder zu Validierungszwecken vorgegebenen Magnetfeldes korreliert. Die Anpassung der Beschichtungsverfahren an die Fasergeome-trie und die mechanischen Eigenschaften der Hybridschichten werden hinsichtlich der me-chanischen Integrität des faseroptischen Sensors diskutiert und der Nachweis der Selbst-diagnosefähigkeit erbracht.
Das Vorhaben ZENSUS beschäftigt sich mit der Erstellung eines Normenentwurfs bzw. einer normen-konformen Technischen Spezifikation für die Zentrifugen-basierte Prüfung der Klebfestigkeit von Stumpfklebungen. Das umfasst auch umfangreiche Validierungsversuche, um mögliche Unterschiede zwischen Kraft-gesteuerter (Zentrifuge) und Weg-gesteuerter (Zugprüfmaschine) bzw. ggf. dazu korrelierte Materialabhängigkeiten mit ihren Auswirkungen auf SOPs zu identifizieren. Die Zentri-fugen-basierte Mehr-Proben-Prüfung von bis zu 8 Klebverbunden wird im Weiteren mit CAT-Technologie („Centrifugal Adhesion Testing“) abgekürzt.
Im Fokus des Vorhabens steht das mit dem Innovationspreis Berlin-Brandenburg 2012 ausgezeichnete Mehr-Proben-Prüfverfahren zur Festigkeitsprüfung unter Verwendung einer analytischen Zentrifuge mit dem Ziel des Einsatzes in der Qualitätssicherung. Nachdem im MNPQ-Projekt QUO VADIS die grundsätzliche Anwendbarkeit der Zentrifugentechnologie auf Beanspruchungen auf Zug (Kleb-, Haft- und Verbundfestigkeit) nachgewiesen worden war, wurden im Vorhaben QUO VADIS PLUS folgende erweiterte Prüfszenarien und technische Weiterentwicklungen etabliert: 1. Beanspruchung auf Druck (Härte von Materialien, Kompressibilität von Schäumen, Kompaktierbarkeit von Pulvern), 2. Erweiterung der Beanspruchung auf Zug (Kombination von Normal- und Lateralkräften), 3. Erweiterung auf die Bewertung plasto-elastischenn Materialverhaltens, 4. Vermeidung von Schockwellen im Hochlastbereich
MISTRAL-Müller-Matrix-basierte Identifizierung von Inhomogenitäten und strukturellen Anomalien
(2020)
Mit abbildender Ellipsometrie (imaging ellipsometry: IE) können Nanometer-Beschichtungen/ Degradationen visualisiert und bezüglich Brechungsindex n, Extinktionskoeffizient k und Schichtdicke d charakterisiert werden. Materialseitig werden lokal Homogenität und Isotropie innerhalb eines/mehrerer Bildpunkte (field of analysis: FOA) und messtechnisch global die Ebenheit der Proben bezüglich aller Bildpunkte des Messfeldes vorausgesetzt. Für die Müller-Matrix-basierte abbildende Ellipsometrie (MM-IE), die den optischen Response anisotroper Materialien in jedem Bildpunkt über die bis zu 16 Müller-Matrix-Elemente erfasst, ist dies von besonderer Relevanz. Reale Substrate sind aber oft nicht eben, können lokal Noppen/Mulden (im FOA) aufweisen oder sind global konvex/ konkav im möglichen Messfeld (field of view: FOV) gekrümmt. Diese lokalen/globalen strukturellen Anomalien des Substrats werden schon für die IE messtechnisch/modellseitig oft nicht beherrscht und sind für die MM-IE in der Wirkung auf die MM-Elemente unbekannt. Diese Defizite sollen messtechnisch bzw. modellmäßig behoben und somit die Messung lokal/global gekrümmter Oberflächen ermöglicht werden (MM-CSIE, CS curved surface).
The paper addresses the “Functional coatings for mechanical applications: characterization and standardization” and the following points are discussed in more detail:
1. Mechanic alapplications (coatings for tools and components, system features vs. material parameters)
2. Mechanical characterization (instrumented indentation testing (IIT), centrifugal adhesion testing (CAT), state of standardization)
3. Topometric characterization (white light interference microscopy (WLIM, 3D), mechanical stylus (MS, 2D), state of standardization)
4. Optical characterization (spectroscopic ellipsometry (SE), inter-laboratory comparison, state of standardization)
Proposal for revision of en 15870 „Adhesives determination of tensile strength of butt joints”
(2021)
The paper addresses the PROPOSAL FOR REVISION OF EN 15870
„ADHESIVES -DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS” “ and the follow points are discussed in more detail: Adhesives-Determination of tensile strength of butt joints, Introduction of Centrifugal Adhesion Testing, Comparison of Testing Methods.
Der Vortrag widmet sich der „ELLIPSOMETRISCHE KLASSIFIZIERUNG VON KOHLENSTOFFSCHICHTEN“ und beschreibt die Punkte: 1. Anwendungen Kohlenstoffschichten–Carbon–based films (DLC) aus dem Vortrag N. Ohtakeet. al. (ISO TC 107, Tokyo 2017),2. Präparation der Kohlenstoffschichten für ISO TC 107 Ringversuch aus Vortrag M. Hiratsuka et. al. (ISO TC 107, Tokyo 2017), 3. Ellipsometrische Charakterisierung von Kohlenstoffschichten, Ergebnisse des Ringversuchs (ISO TC 107, Tokyo 2017) Vortrag Beck et. al. und 4.Deutsche Normungsaktivitäten national/international zur Ellipsometrie DIN NA 062-01-061 (DIN 50989-1)/TC 107 (PWI DE)“ im Einzelnen.
The paper addresses “WHITE LIGHT INTERFERENCE MICROSCOPY, ELLIPSOMETRY, AND INSTRUMENTED INDENTATION TESTING AS REFERENCE PROCEDURES“ and is subdivided in the following sections: 1. Measurement vs. testing vs. reference procedures, 2. White light interference microscopy (WLIM) for determination of step height h, 3. Spectroscopic ellipsometry (SE) for determination of layer thickness d and 4. Instrumented indentation testing (IIT) for determination of indentation hardness HIT. The following points are discussed in more detail: methodology of measurement and testing, uncertainty budgets for direct (WLIM), model-based (SE) and formula-based (IIT) reference procedures by means of specific examples. It is shown that standardization efforts are connected to reference procedures.
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächen-technik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider.
Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Charakterisierung von funktionellen Glasoberflächen für bioanalytische Anwendungen, zur Messung der Schichtdicke von Nanomaterialien mittels Ellipsometrie, zur Kalibrierung von Interferometern und Interferenzmikroskopen für die Formmessung, zur Rockwelleindringprüfung zur Bewertung der Schicht-haftung, zu den Grundlagen der Ellipsometrie, zur Messung der Schichtdicke mittels Wirbelstromverfahren, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zu Filtern und Augenschutzgeräten gegen Laserstrahlung sowie zur Bestimmung der Schichthaftung mittels Zugversuch.
In Glasfasern eingeschriebene Bragg-Gitter (FBG: fibre-based Bragg gratings) sind über die Verschiebung der Bragg-Wellenlänge in der Lage, Stauchungen und Dehnungen von Glasfasern hochgenau zu erfassen. In Kompositwerkstoffe eingebettete faseroptische Sensoren können Bauteile bezüglich ihrer mechanischen Integrität überwachen und früh-zeitig Informationen über Materialveränderungen gewinnen.
Um die Zuverlässigkeit eines solchen Sensors zu gewährleisten, ist es wichtig, die korrekte Funktion des Sensors im Verbund mit der Werkstoff-Matrix on-line und in-situ sicherzu-stellen. Im Rahmen des DFG-Projekts FAMOS² (FAser-basierter Magneto-Optischer SchichtSensor) wurde ein selbstdiagnosefähiger Schichtsensor entwickelt, der mit Hilfe von magnetostriktiven Aktorschichten aus Nickel bzw. Eisen-Nickel validiert werden kann.
Der FAMOS²-Schichtsensor wird durch ein PVD (physical vapour deposition)/ECD (electro-chemical deposition) Hybridschichtsystem realisiert, das auf dem Fasermantel im Bereich des FBG haftfest, homogen und langzeitfunktional abzuscheiden ist. Dabei wird in einem ersten Schritt ein etwa 100 Nanometer dünnes PVD-Schichtsystem aus Chrom und Kupfer als Haftvermittler auf der Glasfaser bzw. als leitfähige Startschicht für den nachfolgenden ECD-Prozess abgeschieden. Um eine rotationssymmetrische Schich-tabscheidung zu gewährleisten, erfolgt während der PVD-Beschichtung eine Rotation der Glasfasern. In einem zweiten Schritt wird dann unter Verwendung eines klassischen Watts-Elektrolyten in einer speziell entwickelten ebenfalls rotationssymmetrisch aufgebau-ten ECD-Durchströmungszelle dann die etwa 30 Mikrometer dicke, magnetostriktive Ak-torschicht auf dem PVD-Schichtsystem abgeschieden, im Vergleich sowohl reine Nickel-Schichten als auch Nickel-Eisen-Schichten.
Ein äußeres Magnetfeld dehnt die magnetostriktive Aktorschicht und damit auch die Faser reversibel. Diese Dehnung führt zu einer Verschiebung der Bragg-Wellenlänge, welche direkt mit der Stärke eines zu messenden oder zu Validierungszwecken vorgegebenen Magnetfeldes korreliert. Die Anpassung der Beschichtungsverfahren an die Fasergeome-trie und die mechanischen Eigenschaften der Hybridschichten werden hinsichtlich der me-chanischen Integrität des faseroptischen Sensors diskutiert und der Nachweis der Selbst-diagnosefähigkeit erbracht.
Mit der Zentrifugentechnologie ist seit einigen Jahren ein neuartiges Mehr-Proben-Prüf-verfahren auf dem Markt etabliert, welches die klassische Zugprüfung in den Trommelrotor einer Tischzentrifuge überträgt. In der Beanspruchung auf Zug ist die Prüfung der Verbundfestigkeit mittels CAT-Technologie (centrifugal adhesion testing) an der BAM seit 2017 nach DIN EN ISO/IEC 17025 akkreditiert, wobei die Verbundfestigkeit von Klebungen direkt bestimmt wird und in Abhängigkeit von den Versagensformen Rückschlüsse auf die Klebfestigkeit von Klebstoffen/Klebebändern oder die Haftfestigkeit von Beschichtungen gezogen werden können.
Imaging of surfaces regarding topographical, morphological, micro-structural, and chemical features is a key requirement for quality control for the identification of contaminated, degraded, damaged or deliberately modified surface areas vs. clean, virgin, undamaged or unmodified regions. As optical functions may represent any of these changes on the micro- and nano-scale, imaging ellipsometry (IE) is the technique of choice using either intensity, phase, or/and amplitude contrast for visualization of low-contrast surface modifications [1, 2]. Defects or surface and film features whether native or artificial, intended or unintended, avoidable or unavoidable as well as surface pattern are of interest for quality control. In contrast to microscopic techniques operated at normal incidence, ellipsometry as oblique-incidence technique provides improved contrast for vertically nano-scaled add-on or sub-off features such as ultra-thin transparent films, metallic island films, carbon-based thin films, laser modification or laser induced damage, dried stain, cleaning agent or polymeric residue. Two-sample reference techniques, i.e. referenced spectroscopic ellipsometry (RSE) may further increase sensitivity and decrease measurement time. In case of particulate accumulations depolarization contrast imaging (DCI) may improve the lateral resolution beyond the Abbe limit. This has been proven for silica spheres as reference in terms of single particles, particulate accumulations or particulate monolayers and layer stacks. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used for reference measurements of particle diameter, particle height, or particulate layer/accumulation thickness. It has been shown that single silica particles of 250 nm in diameter, i.e. at least a factor of 4 better than the lateral resolution limit as of now, can be visualized on even substrates. However, the ellipsometric measurement of particle diameters of this size needs further efforts interpretation.
The application of PVD-coatings ranges from mechanical engineering, i.e. thicker tribological coatings, to precision optics, i.e. thinner optical coatings. For physical vapor deposition (PVD) technologies such as evaporation, sputtering, ion beam assisted/driven deposition, vacuum is a prerequisite for two reasons: at first process-related ones (evaporation source, plasma discharge, and mean free path) and at second coating-related ones (pure, perfect, and dense films). Usually, the goal is a homogenous coating of defined stoichiometry and micro-structure without any imperfection.
However, the implementation of micro- or nano-particles may occur accidentally or delibe-rately. Independent of the particle origin, there are two fundamental rules regarding coating functionality: at first, the larger the particle diameter to coating thickness ratio the more affected the functionality of the coating, and at second, the larger the material contrast in terms of the functional feature of interest the more affected the coating performance. Hence, embedded particles have to be avoided for the majority of thin films by all means. The unintended implementation of particles usually results in a malfunction of the coating from the beginning or is at least considered as a weak point of the coating creating a time-dependent defect under service conditions. The intended implementation of particles on surfaces and in coatings may create add-on features, topographic ones and functional ones, however, the facts mentioned hold true.
Examples of particle-initiated coating defects are demonstrated in dependence on the origin and the field of application. Strategies for deliberate attachment/embedding of particles on surfaces/in coatings are discussed regarding process compatibility and coating integrity. For industrial applications, both the validation of process compatibility of particle injection and the plasma resistance of particles under vacuum and plasma conditions have to be confirmed. Further points of interest are the homogeneity of particle distribution and the avoidance of particle agglomeration which is still a crucial point for dry dispersed particles. So far, technical applications are limited to PVD hybrid coatings, plasma dispersion coatings are still a challenge except for applications where homogeneity is not required as in case of product authentication.
Multi-functional coatings are a key requirement for surface engineering. General demands are adhesion and long-term stability under service conditions. The modification of surfaces by means of PVD-, ECD- or hybrid processes allows an add-on functionalization of surfaces by a huge diversity of materials with both lateral and vertical micro-/nano-designs. This fact is a prerequisite for micro- and sensor-systems in lab-on-chip and sensor-on-chip technology. Two layer-based sensor principles are presented, i.e. surface plasmon resonance enhanced spectroscopic ellipsometry (SPREE) for detection of hazardous gases and magneto-optical sensors on smart-coated fiber Bragg gratings (FBG) for structural health monitoring (SHM).
The interdependence of substrate features, coating properties, and layer design is discussed firstly for gas sensitivity and selectivity of SPREE-sensors and secondly for sensitivity and selectivity of magneto-strictive coatings to mechanical strain or external magnetic fields resulting in an optical displacement of the Bragg wavelength of FBG-sensors. Moreover, generic features such long-term stability, crucial process-related fabrication conditions, and effects of operational and environmental parameters are discussed with respect to the sensor performance. It has been shown that appropriate layer design and adapted selection of layer materials (SnOx/Au, Fe/Ni:SnOx/Au; Ni/NiFe-Cu-Cr) result in improved sensor parameters and may enable new sensor applications.
The talk addresses the STANDARDIZATION OF ELLIPSOMETRY and the following points are discussed in more detail: historical background of ellipsometry, history of International Conferences on Ellipsometry, Workshops Ellipsometry in Germany and Europe, information on German/European Working Group Ellipsometry, technical/industrial importance of ellipsometry, applications on non-ideal material systems and standardization activities on ellipsometry.
Sufficient adhesion/tensile strength are basic requirements for any coating/composite material. For coatings, adhesive strength in N/mm2 is of Major interest for various applications such as decorative and water-repellent coatings on wood (paints and varnishes), optical coatings on glass and polymers (reflectors and filters), electrical coatings on semiconductors, glass and polymers (conducting and bondable layers), mechanical coatings on metals and polymers (wear-reduction, scratch-resistance) and adhesion-promoting layers. For composite materials, tensile strength in N/mm2 is also a key quantity for carbon fiber reinforced composites (CFC), laminates and adhesive-bonded joints. Centrifugal adhesion testing (CAT) transfers the single-sample tensile test from a tensile or universal testing machine into an analytical centrifuge as multiple-sample test of up to eight test pieces. The one-sided sample support instead of a two-sided sample clamping and the absence of mounting- and testing-correlated shear forces provides fast and reliable results both for adhesive strength and bonding strength by means of bonded test stamps. For bonding strength, the evaluation of failure pattern from microscopic inspection is required in order to determine the failure pattern according to ISO 10365 such as adhesive failure (AF), delamination failure (DF) and cohesive failure (CF). Hence, one test run by CAT-technology provides either statistics or ranking of up to eight samples at once. For adhesive strength of coatings, a variety of examples is discussed such as ALD-Al203 layers as adhesion promoters, evaporated Ag-layers on N-BK7 glass, sputtered Cr- and Al-layers on Borofloat 33 glass, evaporated Au-films on N-BK7 glass and sputtered SiO2 -layers on CR39 Polymer. Provided adhesive or bonding strength are high enough, the substrate or the joining part may also fail.
Der Vortrag widmet sich der „Zentrifugentechnologie zur statistischen Untersuchung von Stumpfklebungen“ und beschreibt drei wesentlich verschiedene Realsysteme (Fügefläche 1/Klebstoff/ Fügefläche 2), um die Statistik ZPM (wiederholte Ein-Proben-Prüfung) vs. CAT (Mehr-Proben-Prüfung) zu vergleichen. Dazu wurden drei unterschiedliche Klebstoff-klassen mit typischen Fügeteilmaterialkombinationen ausgewählt und in einem Vorversuch mit jeweils 3 unterschiedlichen Prüfgeschwindigkeiten sowohl im Weg-geregelten als auch Kraft-geregelten Mode beansprucht. Die Ergebnisse ZPM vs. CAT und Kraft- vs. Weg-Regelung des Vorversuches zeigten keinerlei Unterschiede auf. Im Ergebnis wurde ein Ringversuch im Kraft-geregelten Mode (6xZPM vs. 8xCAT) für ein Referenzsystem durchgeführt, der nachwies, dass die CAT-Technologie statistisch relevante Prüfergebnisse zur Klebfestigkeit bereitstellt. Es zeigte sich, dass für zwei ZPM-Teilnehmer im Vertrauensbereich 99% statistisch signifikant etwas kleinere Werte der Klebfestigkeit bestimmt wurden, was auf geringfügige Abweichungen von der axialen Ausrichtung des eingespannten Prüflings bei der Ein-Proben-ZPM-Zugprüfung zurückgeführt wird.
Mechanische, topometrische und optische Charakterisierung von Schichten mit Stand der Normung
(2019)
Der Vortrag „MECHANISCHE, TOPOMETRISCHE UND OPTISCHE CHARAKTERISIERUNG VON SCHICHTEN MIT STAND DER NORMUNG“ widmet sich unterschiedlichen Beschichtungssystemen und deren mechanischer, topometrischer und optischer Charakterisierung. Über die entsprechenden aktuellen Normen wird informiert. Es betrifft Verfahren wie die Instrumentierte Eindringprüfung (IIT), Centrifugal Adhesion Testing, Weißlichtinterferenzmikroskopie, Tastschnittverfahren und Ellipsometrie (SE).
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächentechnik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider. Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Bewertung von Auflösung und Schärfe mit strahlbasierten Methoden im Nanometer- und Mikrometerbereich, zur Messung von Schichtdicken und Nanopartikeln in kritischen Dimensionen einschließlich Größen- und Formverteilungen mittels REM, zur Messung der Schichtdicke von Nanomaterialien und zur Klassifizierung von Kohlenstoffschichten mittels Ellipsometrie, zur Standardisierung der Ellipsometrie, zur Kalibrierung von Konfokalmikros-kopen für die Formmessung, zur linear elastisch dynamischen instrumentierten Eindringprüfung, zur Messung der flächenbezogenen Masse mittels AAS und ICP, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zur Schichtdicken und Flächen-widerstandsbestimmung sowie zur Bestimmung der Schichthaftung mittels Zentrifugentechnologie.
Der Vortrag gibt den aktuellen Stand der Normung im Bereich der Oberflächen-technik insbesondere der Oberflächenanalytik und der Oberflächenmess- und -prüftechnik wider. Vorgestellt wird der Status technischer Berichte, Normenentwürfe und Normen u.a. zur Charakterisierung von funktionellen Glasoberflächen für bioanalytische Anwendungen, zur Messung der Schichtdicke von Nanomaterialien mittels Ellipsometrie, zur Kalibrierung von Interferometern und Interferenzmikroskopen für die Formmessung, zur Rockwelleindringprüfung zur Bewertung der Schicht-haftung, zu den Grundlagen der Ellipsometrie, zur Messung der Schichtdicke mittels Wirbelstromverfahren, zur Schichtpotentialmessung von Mehrfach-Nickelschichten, zu Filtern und Augenschutzgeräten gegen Laserstrahlung sowie zur Bestimmung der Schichthaftung mittels Zugversuch.
Up until several years ago, tensile and compressive tests have been exclusively carried out as single-sample tests within a tensile, hardness or universal testing machine. The availability of centrifuge technology changed this situation in 2013 in several ways because centrifugal force is used as testing force within a rotational reference frame.
Firstly, multiple-sample strength testing became feasible for both tensile load condi-tions, e.g. determination of composite, bonding or adhesive strength, and compressive load conditions, e.g. hardness, compressibility and compactibility. Secondly, there is no need for a two-sided sample clamping and double-cardanic suspensions as samples are simply inserted using a one-sided sample support. Thirdly, shear forces can be avoided by means of guiding sleeves which steer test stamps acting as mass bodies for either tensile or compressive testing. Fourthly, up to eight samples can be tested under identical conditions within a very short period of time, typically within 15 minutes including sample loading and unloading. Hence, either a reliable statistics (of identical samples) or a ranking (of different samples) can be derived from one test run.
The bench-top test system is described in detail and demonstrated that centrifugal force acts as testing force in an appropriate way because Euler and Coriolis force do not affect the testing results. Examples for both tensile strength testing, i.e. bonding strength of adhesives-bonded joints and adhesive strength of coatings, and compres-sive strength testing, i.e. Vickers-, Brinell- and ball indentation hardness and deter-mination of spring constants, are presented, discussed and compared with conven-tional tests within tensile, hardness or universal testing machines.
At present, a maximum testing force of 6.5 kN can be realized which results at test stamp diameters of 5 mm, 7 mm, and 10 mm in tensile or compressive stress values of 80 MPa, 160 MPa, and 320 MPa. For tensile strength, this is already beyond bonding strength of cold- and warm-curing adhesives. Moreover, centrifuge technology is compliant to standards such as EN 15870, EN ISO 4624, EN ISO 6506/6507 and VDI/VDE 2616. Programmable test cycles allow both short-term stress and log-term fatigue tests. Based on a variety of examples of surface and bonding technology, applications in both fields R&D and QC are presented. Meanwhile, centrifuge technology is also accredited according to DIN EN ISO/IEC 17025.
Bonding strength is crucial on polymers of low surface energy, for clean surfaces limited to 0.5, 1, and 2 MPa for PTFE, PP, and PE. Plasma treatment may improve bonding strength by a factor of 2 (PTFE) or 5 (PP and PE). The efficiency of treatment is usually 10% as both low pressure and atmospheric pressure processes show low topographic conformity.
Besides, lifetime of activation/modification is rather short. Hence, bonding has to be carried out immediately after plasma treatment.
The concept of plasma-assisted ALD (atomic layer deposition) interlayers was introduced in the project HARFE of SENTECH (modification/deposition/in-situ monitoring) and BAM (bonding, characterization, testing). ALD deposition has a high surface conformity and for dielectric films of Al2O3 also a good long-term stability given that the films are dense enough.
Based on TMA and O2/O3 precursors, ALD layer stacks from 60 to 375 monolayers were prepared under different conditions. For a transfer time of 24 hours from deposition to measurement, bonding strength could be increased up to 5 MPa (PTFE) respectively 10 MPa (PP, PE). The huge potential of ALD layers as adhesive interlayers was demonstrated for Al2O3 on stainless steel with bonding strength beyond 15 MPa, i.e. interface
strength within the ALD stack is also in this range.
This is a prerequisite for subsequent PVD/CVD-deposition in hybrid systems. By means of the SI ALD LL system of SENTECH thermal and plasma-supported ALD processes can be alternatively realized.
Ellipsometric in-situ monitoring provides monolayer sensitivity and reveals that the efficient bonding of the lower ALD layers on the polymer has to be further improved. Testing of bonding strength was realized by CAT (centrifugal adhesion testing) technology. It was shown that ALD modification correlates with the increase of surface energy and bonding strength.
Transparent conductive oxide (TCO) films are a vital part of a large part of modern technology. The production of TCO materials has sparked much development in plasma coating technology. Quality control measurements of these layers are therefore important in many fields of optics and electronics such as high efficiency thin film photovoltaics. In this presentation, we report on optical measurements of ZnSnOx layers generated by DC/RF magnetron plasma co-sputtering. By changing the respective power on two different targets, the overall power, the gas composition and post-treatment, the properties of this type of layers can be varied in a number of parameters. The optical, electrical, and chemical properties of TCO layers are the technically most important properties together with the layer thickness. The dielectric function of layers is accessible by means of spectroscopic ellipsometry, which also yields the very important value for the layer thickness at the same time. It would be a significant step forward in quality control to use this non-destructive method also as a fast test for electrical properties. Therefore, we report on the optical properties connected to the production parameters, and also on our preliminary results connecting the optical dielectric function (in the visible and near infrared) to the electrical conductivity of the layers. We discuss the effect of deposition parameters on the optical properties of the layers and present an approach for correlating optical and electrical properties. Further, we discuss the question of accuracy of optical properties gained from model-fit-based optical methods and the use of different parameterised models for the dielectric function to achieve this.
The paper addresses the “State-of-the-Art in Multiple-Sample Evaluation of Adhesive and Bonding Strength” and the following points are discussed in more detail:
1. Motivation (coatings, varnishes, tapes, laminates, CFRP, adhesive-bonded joints)
2. Conventional single-sample testing (evaluation of adhesive and bonding strength; failure pattern)
3. Multiple-sample handling (MSH), bonding (MSB), and testing: centrifugal adhesion testing (CAT) (multiple-sample approach, tensile test within a centrifuge)
4. Application examples of CAT-Technology™ (laminates, optical coatings, CFRP joints)
Finally, a summary is given regarding status quo and benefits of CAT-technology under tensile stress conditions whereas examples of testing in a centrifuge under compressive stress conditions are mentioned in the outlook.
Auf dem Weg zu Industrie 4.0: Bestimmung von Messunsicherheitsbudgets in der Oberflächentechnik
(2019)
Vorgestellt wurde die Bestimmung von Messunsicherheitsbudgets für sehr unterschiedliche physikalische Größen, die in der Oberflächentechnik von hoher Relevanz sind: Stufenhöhe h, Schichtdicke d, Eindringhärte HIT und Haftfestigkeit. Die Unterschiede betreffen die Art der Prüfmethodik (optisch zerstörungsfrei vs. mechanisch invasiv/zer-störend), die laterale Größe des Integrationsgebietes der Messung (lokal:nano bis sub-mikro vs. global: mikro bis makro) und die Art der Bestimmung von Messunsicherheitsbudgets (physikalische Größen: direkt rückführbar; Werkstoffkenngröße: genormt; Systemkenngröße: genormt).
Im Rahmen von Industrie 4.0 werden ausgehend der geforderten Spezifikation des beschichteten Produkts (Mittelwert mit Vertrauensbereich oder Mindestwert) durchgehende Toleranzbänder zur Oberflächenmodifizierung/Beschichtung des Substrats, einhergehend mit Prozessfenstern, die diese Toleranzbänder garantieren, erforderlich, die zuverlässig erfasst werden müssen. Die Frage der anzuwendenden Mess- und Prüftechnik und die damit notwendige Betrachtung von Messunsicherheitsbudgets ist für die Digitalisierung von Konditionierungs-, Zustands-, Regel- und Steuergrößen unverzichtbar. Mit Blick auf die Einhaltung von Prozessfenstern und die dafür notwendige Prozessführung wird technologisches Kern-Know-how digitalisiert, das es unbedingt zu schützen gilt. Nur lokale Netze können diese Sicherheit garantieren, in globalen Netzen ist die Datensicherheit bestenfalls maximierbar.
Der Vortrag widmet sich der „CAT-TECHNOLOGIE ZUR BESTIMMUNG DER HAFTFESTIGKEIT DÜNNER SCHICHTEN“ und beschreibt die Punkte „Motivation –CAT-Technologie“ (CAT: Centrifugal Adhesion Testing) und die „Haftfestigkeit von Schichten“, (Ag-Schichten auf N-BK7 Glas, Cr- und Al-Schichten auf Borofloat 33 Glas, Au-Schichten auf N-BK7 Glas und SiO2-Schichten auf CR39 Polymer) im Einzelnen.
Der Vortrag widmet sich der „ CAT-TECHNOLOGIE ZUR BESTIMMUNG DER KLEBFESTIGKEIT“ und beschreibt die Punkte „Motivation –CAT-Technologie (Centrifugal Adhesion Testing), Klebfestigkeit ( Materialscreening verschiedener Werkstoffklassen, Klebstoffscreening fürV2A gegenV2A als Referenz, Klebstoffscreening für Niedrigenergie-Polymere und Oberfächenmodifizierung von Niedrigenergie-Polymeren) und Verbundfestigkeit (“Stirnabzug vs. Zug-Scher-Prüfung an CFK) im Einzelnen.
One-pot covalent functionalization of 2D black phosphorus by anionic ring opening polymerization
(2022)
In this work, a one-pot approach for the covalent functionalization of few-layer black phosphorus (BP) by anionic ring opening polymerization of glycidol to obtain multifunctional BP-polyglycerol (BP-PG) with high amphiphilicity for near-infrared-responsive drug delivery and biocompatibility is reported. Straightforward synthesis in combination with exceptional biological and physicochemical properties designates functionalized BP-PG as a promising candidate for a broad range of biomedical applications.
The structure and composition of polycarbonate polydimethylsiloxane copolymer (PC-co-PDMS) was investigated by applying various analytical approaches including chromatographic separation methods, spectrometric, and spectroscopic detection techniques. In particular, size exclusion chromatography (SEC) and liquid adsorption chromatography operating at different conditions (e.g. using gradient solvent systems) were used to achieve separations according to molar mass and functionality distribution. The coupling of both techniques resulted in fingerprint two-dimensional plots, which could be used to easily compare different copolymer batches. Matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) mass spectrometry was applied for structural investigations. The different ionization behavior of both comonomers, however, strongly limited the applicability of this technique. In contrast to that, Fourier-transform Infrared (FTIR) spectroscopy could be used to quantify the amount of PDMS in the copolymer at different points in the chromatogram. The resulting methodology was capable of distinguishing PC-co-PDMS copolymer from PC homopolymer chains present in the material.
Microplastic detection in water samples becomes important for tracing microplastic sources. Microplastic may harm desalination facilities by blocking filters and disturbing the marine food chain. Thermo analytical methods such as pyrolysis gas chromatography mass spectroscopy, and spectroscopic methods like (micro) Raman spectroscopy or (micro) Fouriertransform infrared spectroscopy in combination with appropriate filters and sample preparation are suitable for analyzing microplastics on a scale from 1 µm to 1000 µm fast and unambiguous. While the thermo analytical methods are suitable for larger sample volumes, Raman spectroscopy and Fouriertransform infrared spectroscopy are able to detect and analyze single microplastic particles for instance in bottled water. Machine learning algorithms ensure a reliable classification of different plastic materials.
A rigid aromatic phosphorus-containing hyperbranched flame retardant structure is synthesized from 10-(2,5 dihydroxyphenyl)-10H-9-oxa-
10-phosphaphenanthrene-10-oxide (DOPO-HQ), tris(4-hydroxyphenyl)phosphine oxide (THPPO), and 1,4-terephthaloyl chloride (TPC). The resulting poly-(DOPO-HQ/THPPO-terephthalate) (PDTT) is implemented as a flame retardant into an epoxy resin (EP) at a 10 wt% loading. The effects on EP are compared with those of the monomer DOPO-HQ and triphenylphosphine oxide (OPPh3) as low molar mass flame retardants. The glass transition temperature, thermal decomposition, flammability (reaction to small flame), and burning behavior of the thermosets are investigated using differential scanning calorimetry, thermogravimetric analysis, pyrolysis combustion flow calorimetry, UL 94-burning chamber testing, and cone calorimeter measurements.
Although P-contents are low at only 0.6 wt%, the study aims not at attaining V-0, but at presenting a proof of principle: Epoxy resinswith PDTT show promising fire performance, exhibiting a 25% reduction in total heat evolved (THE), a 30% reduction in peak heat release rate (PHRR) due to flame inhibition (21% reduction in effective heat of combustion (EHC)), and an increase in Tg at the same time. This study indicates that rigid aromatic hyperbranched polymeric structures offer a promising route toward multifunctional flame retardancy.
One aim of the EMPIR nPSize project 17NRM04 was to develop and validate three classes of candidate reference (test) materials (RTMs), with i) well-defined non-spherical shape, ii) relatively high polydispersity index, and iii) accurate particle concentrations.
To fulfil the requirements of the project, 11 different types of materials were prepared. Following the initial assessment of the materials suitability, nPSize5_PT_UNITO, nPSize6_AC_UNITO and nPSize7_GN_CEA materials were found unsuitable for the project, due to various reasons. PT material was deemed unsuitable due to its predominantly agglomerated nature. AC material contained relatively high amount of impurities (other particle forms). GN material was found too heterogeneous in both the length and width for the purpose of the project. The remaining 8 candidate RTMs were assessed for their homogeneity and stability and used for successful delivery of the associated activities within the nPSize project.
The main objective was to assess homogeneity of two bimodal gold materials, namely nPsize1 and nPSize2, containing approximately 1:1 and 10:1 particle number-based ratio of ~30nm and ~60nm particles. Particle number-based concentration within the two size fractions was determined with spICP-MS using the particle frequency method of calibration.
One of the biggest problems in high-voltage silicone rubber insulation cable accessories is the damage on electrical treeing, initiated by partial discharges. The electrical treeing starts at unavoidable imperfections inside the material or at interfaces. The damage is usually irreversible and leads around the starting points to a partial destruction of the material. To prolong the lifetime and thereby to increase the assurance of the structural component commonly, for mechanical improvement constituted filler is modified to obtain a self-healing silicone rubber. Damage mechanism is analysed to address the filler to the damage mode.
3D microstructures with sub-micron resolution can be manufactured in additive manner applying multi-photon laser structuring technique. This paper is focused on the incorporation of superparamagnetic iron oxide nanoparticles into the photoresist in order to manufacture micrometer-sized devices featuring a magnetic moment. The aim of the project is to achieve untethered actuation of the presented objects through externally applied magnetic fields. Future medical application scenarios such as drug delivery and tissue engineering are targeted by this research.
A variety of methods used to prepare nano-objects for surface analysis are described along with information about when they might be best applied. Intrinsic properties of NPs which complicate their characterization and need to be considered when planning for surface or other analyses of NPs are identified, including challenges associated with reproducible synthesis and functionalization of the particles as well as their dynamic nature. The relevant information about the sample preparation processes, along with analysis details and data that need to be added to the collection of material provenance information is identified. Examples of protocols that have been successfully used for preparation of nano-objects for surface analysis are included in an annex.
Novel agar-based test electrolytes are used to perform electrochemical corrosion investigations on ZnFe and ZnNi binary as well as ZnFeMo ternary zinc coatings. The objectives of the electrochemical investigations include the characterization of the corrosion behavior, the description of the protective effect of the coatings as well as the investigation of the layer formation and degradation under artificial aging. ZnFe and ZnFeMo coatings are applied with varying iron content as well as an additional passivation layer, respectively, to study the effect on corrosion resistance. The results show that the protective effect of the coatings is not negatively influenced by different iron contents or the addition of molybdenum. Additional passivation of the ZnFe-containing coatings by means of a passivating agent leads to a significant improvement in the protective effect. Artificial aging leads to slight degradation of the additional passivation layer whereas coatings without post-treatment enhance their protective effect by the formation of corrosion product layers.
The formation mechanisms of Pd-Os and Pt-Os alloys in the course of thermal decomposition of iso-formular and isostructural complex salts [Pd(NH3)4][OsCl6] and [Pt(NH3)4][OsCl6] in an inert atmosphere have been studied by in-situ QXAFS, XPS and PXRD. The mechanisms of thermal decomposition of the precursors are found to differ from each other, but the detected intermediate products show no significant effect on the local atomic structure around Os, Pt/Pd in their final products. A crystalline beta-trans-[Pd(NH3)2Cl2] intermediate of the first step of thermal decomposition of [Pd(NH3)4][OsCl6] makes the anion [OsCl6]2− transform differently than that of [Pt(NH3)4][OsCl6]. It transforms into a short-lived [Os(NH3)xCl6-x] (2≤x≤4), and then to a distorted octahedron [OsCl6]2−, similar to the high-temperature modification of OsCl4. In case of [Pt(NH3)4][OsCl6], the intermediate [Os(NH3)2Cl4] modifies into four chlorine coordinated Os,{OsCl4}0/1−. Consecutive reduction of Pd(II)/Pt(II) and Os(IV) to the metals defines the homophilic atomic order with the fcc-Pd covered by a random Pd-Os alloy layer and Os on the surface, that is supported by High-Resolution Transmission Electron Mictroscopy (HRTEM) and Scanning TEM (STEM) energy dispersive X-ray (EDX) data, and the diffusion direction going from the surface (hcp-Os) to bulk (fcc-Pd/Pt). As a result, the heterogeneous alloys are formed with a very similar electronic and local atomic structure of Os and Pd/Pt. Upon alloying, the Os 5d5/2,3/2 and Pt 5d5/2,3/2 levels are depleted in the Pt-Os alloys compared to dispersed hcp-Os, fcc-Pt, and Pt foil. This is an unusual behaviour for Os and Pt, calling into question the versatility of d-band theory in bimetallic Os-alloys. The spin-orbit effect at the Os site has been found for both the Pd-Os and Pt-Os alloys, but it is about 4 times less compared to the complex salts. The obtained values for the complex compounds are comparable with those for the iridates, proposed as materials with spin-orbit-induced properties.
Combining experiments and all-atom molecular dynamics simulations, we study the conformational behavior of polyacrylamide (PAM) in aqueous alcohol mixtures over a wide range of temperatures. This study Shows that even when the microscopic interaction is dictated by hydrogen bonding, unlike its counterparts that present a lower critical solution temperature (LCST), PAM shows a counterintuitive tunable upper critical solution temperature (UCST)-type phase transition in water/alcohol mixtures that was not reported before. The Phase transition temperature was found to be tunable between 4 and 60 1C by the type and concentration of alcohol in the mixture as well as by the solution concentration and molecular weight of the polymer. In addition, molecular dynamics simulations confirmed a UCST-like behaviour of the PAM in aqueous alcoholic solutions.
Additionally, it was observed that the PAM is more swollen in pure alcohol solutions than in 80% alcoholic solutions due to y-like behaviour. Additionally, in the globular state, the size of the aggregates was found to increase with increasing solvent hydrophobicity and polymer concentration of the solutions. Above ist Phase transition temperature, PAM might be present as individual polymer chains in the coil state (r10 nm). As PAM is a widespread polymer in many biomedical applications (gel electrophoresis, etc.), this finding could be of high relevance for many more practical applications in high performance pharmaceuticals and/or sensors.
A novel cop olyme r based on supramolecular motif2,6-diaminopyridin e and water-soluble acrylamide, poly[N-(6-ace tamidopyridin-2-yl) acrylamide-co-acrylamide], was synthe-size d via rev ersible addi tion–fragmentation chain transfer (RAFT)polymerization with various monomer compositions. The thermo-respon sive behavior of the copolymers was studied by turbidime-try and dynamic light scattering (DLS). The obtained copolymersshowed an upper critical solution temperature (UCST)-typ e phasetransition behavior in water and electrolyte solution. The phasetransition temperature was found to increase with decreasingam ount of acrylamide in the copolymer and increasing concentra-tion of the solution. Furth ermore, the phase transition temperatureva ried in aqueous solutions of electrolytes according to the naturean d concentration of the electrolyte in accordance with theHoffmeister series. A dramatic solvent isotope effect on thetransition temperature was o bserved in this study, as the transitiontemperature was almost 10–12C higher in D2OthaninH2Oatthesame concentration and acrylamide co mposition. The size of theaggregates below the transition temperature was larger in D2Ocompared to that in H2O that can be explained by deuterium iso-tope effect. The thermoresponsive behavior of the copolymers wasalso investigated in different cell medium and found to be exhibitedUCST-type phase transition behavior in different cell medium.Such behavior of the copo lyme rs can be useful in many a pplica-tions including biomedical, microfluidics, optical materials, and indrug delivery.
A recent approach to measure electron radiation doses in the kGy range is the use of phosphors with an irradiation dose-dependent luminescence decay time. However, the applicability of the previously investigated material NaYF4:Yb3+,Er3+ is limited as it shows pronounced fading. Therefore, in this work, a modified SrF2 synthesis is presented that results in SrF2 nanoparticles codoped with Yb and either Er, Hm, or Tm. To assess their suitability as dosimeter material, dose response, as well as its degree of fading over 50 up to 140 days after irradiation were measured. Fading rates as small as 5% in SrF2:Er,Yb and 4% in SrF2:Ho,Yb were derived, which are comparable to established dosimeter materials. A combination of spectroscopy, diffraction and DFT calculations was used to elucidate the effect of irradiation, pointing towards the formation of a secondary phase of Yb2+ that we predict could be Yb2OF2. This irreversible formation of a secondary phase is considered to be the explanation for the low fading behavior in SrF2-based phosphors compared to NaYF4:Yb, Er, a highly attractive feature for electron beam dosimetry.
Iron-based catalysts are employed in CO2-FTS due to their ability to convert CO2 into CO in a first step and their selectivity towards higher hydrocarbons in a second CO hydrogenation step. According to the literature, iron carbides represent the active phase for hydrocarbon formation and are claimed to emerge in the presence of CO. We propose nanostructured FeOx films as model systems to assess information about the complex phase transformations during CO2-FTS. Mesoporous hematite, ferrihydrite, maghemite, maghemite/magnetite films were exposed to CO2-FTS atmospheres at 20 bar and 300°C. Up to three distinct phases were observed depending on the timeon-stream (TOS): a sintered maghemite/magnetite phase, a carbidic core-shell structure, and a low-crystalline, needle-type oxide phase. Our findings indicate that the formation of an intermediary maghemite/magnetite phase, predominant after short TOS (30 h), precedes the evolution of the carbide phase.
Yet, even after prolonged TOS (185 h), no full conversion into a bulk carbide is observed.
The oxides, hydroxides, and oxo-hydroxides of iron belong to the most abundant materials on earth. They also feature a wide range of practical applications. In many environments, they can undergo facile phase transformations and crystallization processes.
Water appears to play a critical role in many of these processes. Despite numerous attempts, the role of water has not been fully revealed yet. We present a new approach to study the influence of water in the crystallization and phase transformations of iron oxides.
The approach employs model-type iron oxide films that comprise a defined homogeneous nanostructure. The films are exposed to air containing different amounts of water reaching up to pressures of 10 bar. Ex situ analysis via scanning electron microscopy, Transmission electron microscopy, selected area electron diffraction, and X-ray diffraction is combined with operando near-ambient pressure X-ray photoelectron spectroscopy to follow water-induced changes in hematite nd ferrihydrite. Water proves to be critical for the nucleation of ematite domains in ferrihydrite, the resulting crystallite orientation, and the underlying crystallization mechanism.
Highly anharmonic thermal vibrations may serve as a source of structural instabilities resulting in phase transitions, chemical reactions and even the mechanical disintegration of a material. Ab initio calculations model thermal motion within a harmonic or sometimes quasi-harmonic approximation and must be complimented by experimental data on temperature-dependent vibrational frequencies. Here multi-temperature atomic displacement parameters (ADPs), derived from a single-crystal synchrotron diffraction experiment, are used to characterize low-frequency lattice vibrations in the alpha-FOX-7 layered structure. It is shown that despite the limited quality of the data, the extracted frequencies are reasonably close to those derived from inelastic scattering, Raman measurements and density functional theory (DFT) calculations. Vibrational anharmonicity is parameterized by the Grüneisen parameters, which are found to be very different for in-layer and out-of-layer vibrations.
Supramolecular copolymerization driven by integrative self-sorting of hydrogen-bonded rosettes
(2020)
Molecular recognition to preorganize noncovalently polymerizable supramolecular complexes is a characteristic process of natural supramolecular polymers, and such recognition processes allow for dynamic self-alteration, yielding complex polymer systems with extraordinarily high efficiency in their targeted function. We herein show an example of such molecular recognition-controlled kinetic assembly/disassembly processes within artificial supramolecular polymer systems using six-membered hydrogen-bonded supramolecular complexes (rosettes). Electron-rich and poor monomers are prepared that kinetically coassemble through a temperature-controlled protocol into amorphous coaggregates comprising a diverse mixture of rosettes. Over days, the electrostatic interaction between two monomers induces an integrative self-sorting of rosettes. While the electron-rich monomer inherently forms toroidal homopolymers, the additional electrostatic interaction that can also guide rosette association allows helicoidal growth of supramolecular copolymers that are comprised of an alternating array of two monomers. Upon heating, the helicoidal copolymers undergo a catastrophic transition into amorphous coaggregates via entropy-driven randomization of the monomers in the rosette.
Niobium metal is the pure element with the highest superconducting critical temperature (T_c = 9.2 K), which is present in many applications. Particularly, in superconducting radio frequency (SRF) cavities of particle accelerators, the control of the surface characteristics of pure Nb is crucial, as the presence of defects may generate magnetic flux pinning that can increase by more than two orders of magnitude the surface critical current, ic. Several procedures such as chemical- or electro-polishing have been used aiming at cleaning surface contamination and decreasing its roughness. Sub-nanosecond lasers can be applied to generate a broad range of micro and nanostructures (e.g. Laser-Induced Periodic Surface Structures, LIPSS) that strongly modify the materials properties - as wettability, color, oxidation resistance or antibacterial behavior. In this work, we analyze a variety of surface structures generated on pure Nb sheets with different laser systems (UV, Vis and n-IR, fs and ps) by exploring a range of processing parameters. These include pulse overlap, irradiance or the effective number of pulses, under different atmospheres (air, N2, Ar, vacuum). The effects on Tc, critical currents and critical fields (Bc1, Bc2 and Bc3) have been obtained from magnetization, ac susceptibility and heat capacity measurements, revealing their dependence with the different surface nanostructures and the chemical changes generated with these laser treatments.
Currently, sulfate-reducing bacteria (SRB) is regarded as the main culprit of microbiologically influenced corrosion (MIC), mainly due to the low reported corrosion rates of other microorganisms. For example, the highest reported corrosion rate for methanogens is 0.065 mm/yr. However, by investigating methanogen-induced microbiologically influenced corrosion (Mi-MIC) using an in-house developed versatile multiport flow test column, extremely high corrosion rates were observed. We analyzed a large set of carbon steel beads, which were sectionally embedded into the test columns as substrates for iron-utilizing methanogen Methanobacterium IM1. After 14 days of operation using glass beads as fillers for section separation, the highest average corrosion rate of Methanobacterium IM1 was 0.2 mm/yr, which doubled that of Desulfovibrio ferrophilus IS5 and Desulfovibrio alaskensis 16109 investigated at the same conditions. At the most corroded region, nearly 80% of the beads lost 1% of their initial weight (fast-corrosion), resulting in an average corrosion rate of 0.2 mm/yr for Methanobacterium IM1-treated columns. When sand was used as filler material to mimic sediment conditions, average corrosion rates for Methanobacterium IM1 increased to 0.3 mm/yr (maximum 0.52 mm/yr) with over 83% of the beads having corrosion rates above 0.3 mm/yr. Scanning electron images of metal coupons extracted from the column showed methanogenic cells were clustered close to the metal surface. Methanobacterium IM1 is a hydrogenotrophic methanogen with higher affinity to metal than H2. Unlike SRB, Methanobacterium IM1 is not restricted to the availability of sulfate concentration in the environment. Thus, the use of the multiport flow column provided a new insight on the corrosion potential of methanogens, particularly in dynamic conditions, that offers new opportunities for monitoring and development of mitigation strategies. Overall, this study shows under certain conditions methanogenic archaea can cause higher corrosion than SRB, specific quantifications, i.e., maximum, average, and minimum corrosion rates can be determined, and that spatial statistical evaluations of MIC can be carried out.
In the pursuit of discovering materials with desirable properties, extending the available material libraries is crucial. High-throughput simulations have become an integral part in designing new materials in the past decades. However, there is no straightforward way of distinguishing synthesizable materials from all the proposed candidates. This project focuses on employing AI-driven methods to estimate synthesizability of materials.
Up to now, material scientists and engineers have relied on domain knowledge as well as empirical heuristics to guess the stability and synthesizability of molecules and crystals. The famous Pauling rules of crystal stability are an example of such heuristics. However, after the accelerating material discovery in all the years since Pauling, these rules now fail to account for the stability of most known crystals. A new predictive set of heuristics for crystal stability/synthesizability is unlikely to be uncovered by human perception, given the magnitude and dimensionality of crystallographic data. Hence, a data-driven approach should be proposed to find a predictive model or set of heuristics which differentiate synthesizable crystal structures from the rest. The main challenge of this research problem is the lack of a negative set for classification. Here, there are two classes of data: the positive class which contains synthesizable materials and the negative class which contains materials which are not synthesizable. While the data from the positive class is simply the data of crystals which have been experimentally synthesized, we do not have access to data points which are certainly unsynthesizable. Strictly speaking, if an attempt of synthesizing a crystal fails, it does not necessarily follow that the crystal is not synthesizable. Also, there is no database available which contains the intended crystal structures of unsuccessful synthesis attempts.
This project proposes a semi-supervised learning scheme to predict crystal synthesizability. The ML model is trained on experimental and theoretical crystal data. The initial featurization focuses on local environments which is inspired by the Pauling Rules. The experimental data points are downloaded through the Pymatgen API from the Materials Project database which contains relaxed structures recorded in Inorganic Crystal Structure Database – ICSD. The theoretical data is queried from select databases accessible through the Optimade project’s API.
Zielsetzung des vom Bundesministerium für Bildung und Forschung geförderten Projektes RUSEKU war es, repräsentative Untersuchungsstrategien für die Detektion von Mikroplastik mittels TED GC/MS in wässerigen Medien zu ermitteln. Dabei wurden verschiedene Probenahmekonzepte und – verfahren für unterschiedliche Fallgestaltungen und Fragestellungen untersucht, sowie neue Filtersysteme entwickelt. Bei der Detektion der Partikel lag der Fokus auf der Anwendung und Weiterentwicklung der ThermoExtraktion/Desorption-Gaschromatographie-Massenspektrometrie (TED-GC/MS) zur Bestimmung von Mikroplastikgehalten. Anwendung fanden die Methoden bei der Beprobung von Flaschenwasser, Waschmaschinenabläufen, dem urbanen Abwassersystem der Stadt Kaiserslautern, sowie in Oberflächengewässer.
In recent years, thermoextraction/desorption-gas chromatography/mass spectrometry (TED-GC/MS) has been developed as a rapid detection method for the determination of microplastics (MP) mass contents in numerous environmentally relevant matrices and, in particular, for the measurement of polymers in water samples without time-consuming sample preparation. The TED-GC/MS method was applied to investigate a typical European municipal wastewater system for possible MP masses. Such investigations are important in view of the recent revision of the Urban Wastewater Treatment Directive. Four different representative sampling sites were selected: greywater (domestic wastewater without toilet), combined sewer, and influent and effluent of a wastewater treatment plant (WWTP). All samples were collected by fractional filtration. Filtration was carried out over mesh sizes of 500, 100, 50, and in some cases, 5 µm. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were detected in all samples, with the PE fraction dominating in all cases. Styrene-butadiene rubber which serves as an indication of tire abrasion, was only found in the influent of the WWTP. The highest MP mass contents were found in the combined sewer, so MP can become a source of pollution during heavy rain events when the capacity limits of the effluent are reached, and the polluted effluent is released uncontrolled into the environment. Based on the studies, MP retention from the WWTP could be estimated to be approximately 96%. Few trends in polymer type or mass contents were detected within the different fractions of the samples or when comparing samples to each other.
Results from different methods applied to micro- and nanoplastics (MNPs) analysis show that there are large gaps in harmonisation with respect to terminology, size classes, sample preparation protocols and, finally, to the comparability of the measurands and descriptors.
Within the European research cluster to understand the health impacts of micro- and nanoplastics (CUSP) working group WG3-Inter-Laboratory Comparisons an overview of the existing detection methods revealing advantages and disadvantages regarding the analytical tasks is being compiled. There is a clear need to develop high class characterized reference materials for MNPs in the size ranges of 100-10 µm and smaller than 10 µm, so that these can be used to validate methods and to make results comparable. Inter-laboratory comparisons (ILCs) on model samples with complex matrices regarding mass, or water samples for number-based methods, will help us to advance the process of harmonization as well as to train users early in process of developing new methods.
We plan to keep all five CUSP projects well-connected also with the 'outside' MNP projects and ILCs and to extract the optimum of needs, capabilities, and efforts in order to launch new VAMAS ILCs which should expand already available ones.
Zur Ermittlung von Mikroplastik-Gehalten in verschiedenen Umweltmatrices ist ein schnelles Detektionsverfahren für die Routineanalytik notwendig. Ein solches Verfahren wird hier in Form der ThermoExtraktion/Desorption-GasChromatographie/ MassenSpektroskopie (TED-GC/MS) vorgestellt. Neben grundlegenden verfahrensspezifischen Erläuterungen zur Identifizierung und Quantifizierung von Mikroplastik werden auch exemplarische Beispiele aus unterschiedlichen Umweltkompartimenten und Produkten dargestellt. Neu vorgestellt wird ein neues Verfahren zur Analytik von Flaschenwasser. Dazu wurde ein Messfiltertiegel entwickelt, der besonders für Proben mit geringen Gehalten an abfiltrierbaren Stoffen geeignet ist
The occurrence of microplastic (MP) in food products, such as beverages in plastic bottles, is of high public concern. Existing analytical methods focus on the determination of particle numbers, requiring elaborate sampling tools, laboratory infrastructure and generally time-consuming imaging detection methods. A comprehensive routine analysis of MP in food products is still not possible. In the present work, we present the development of a smart filter crucible as sampling and detection tool. After filtration and drying of the filtered-off solids, a direct determination of the MP mass content from the crucible sample can be done by thermal extraction desorption gas chromatography mass spectroscopy (TED-GC/MS). The new filter crucible allows a filtration of MP down to particle sizes of 5 µm. We determined MP contents below 0.01 µg/L up to 2 µg/L, depending on beverages bottle type. This may be directly related to the bottle type, especially the quality of the plastic material of the screw cap. Dependent on the plastic material, particle formation increases due to opening and closing operations during the use phase. However, we have also found that some individual determinations of samples were subjected to high errors due to random events. A conclusive quantitative evaluation of the products is therefore not possible at present.
Monitoring von Mikroplastik
(2021)
Im Verbundprojekt RUSEKU wurde die Probenahme von Wasserproben entscheidend weiterentwickelt. Wichtig ist hierbei zu gewährleisten, dass genügend Merkmalsträger in jeder Probe untersucht werden. Es muss daher eine für den Probenahmeort repräsentative Beprobung hinsichtlich des Wasservolumens in Abhängigkeit der Partikelanzahl gewährleistet sein.
Das Hauptaugenmerk lag im vorliegenden Projekt auf einer praxisnahen Beprobungsstrategie. Es wurden verschiedene Konzepte ausprobiert.
• Grundsätzlich hat sich gezeigt, dass eine Stichprobe eine Momentaufnahme des MP-Massengehaltes zeigt. Es wird eine hohe Statistik, also eine Vielzahl an Messungen am gleichen Probenahmeort, benötigt, um eine valide Aussage über den MP-Gehalt zu machen.
• Es zeigt sich, dass eine integrale Probenahme über mehrere Wochen mit dem SK routinemäßig möglich ist. Die erfassten MP-Massen sind reproduzierbar und robust.
• Die DFZ ist für Stichproben geeignet. Partikel < 50 µm werden eventuell unterschätzt
• Die fraktionierte Filtration kann für Stich- und Mischproben direkt im Feld genutzt werden. Fraktionen von 10 und 5 µm werden später im Labor Vakuum filtriert. Es erfolgt eine Fraktionierung der Probe mit Siebmaschenweiten von 1000, 500, 100, 50, 10 und 5 µm.
• Die fraktionierte Filtration kann auch anschließend an die Beprobung mit dem SK zur Anwendung kommen. Wird die mit dem SK gewonnene Wasserprobe fraktioniert filtriert, kann neben einem MP-Gesamtgehalt auch eine Einschätzung über die Partikelgrößen gewonnen werden.
• Für Wässer mit geringen Partikelzahlen wurde ein Messfiltertiegel entwickelt. Dieser hat eine Maschenweite von 6 µm. Seine Anwendung kann mögliche Verluste beim Transferieren vom Probenahmetool zum Messgefäß und mögliche Kontaminationen reduzieren.
Die Optimierung der Probenahmestrategie wurde durch Modellversuche und Simulationen unterstützt. Modellversuche zum Sinkverhalten und Simulationen von MP in realen Gewässern verdeutlichten das komplexe Verhalten der Partikel. Es konnte gezeigt werden, dass Partikel ab einer bestimmten Größe (und kleiner) bei genügend starker Turbulenz sich in der Wassersäule unabhängig von ihrer Dichte verhalten und so auch MP mit kleiner Dichte (z.B. PE) in der gesamten Wassersäule zu finden sind. Es konnte mit dem TEM die Existenz von NP gezeigt werden.
Ein wesentlicher Aspekt des RUSEKU Projektes war die Beprobung realer Kompartimente. Beprobt wurde neben Oberflächengewässern, das urbane Abwassersystem der Stadt Kaiserslautern, Waschmaschinenabwasser und Flaschenwasser.
• In Oberflächengewässern wurde hauptsächlich PE gefunden. Je nach Probe und Gewässer konnten auch PP, PS, PET, PA, SBR und Acrylate nachgewiesen werden.
• Im urbanen Abwassersystem der Stadt Kaiserslautern konnte an allen Probenahmestandorten MP nachgewiesen werden. Es wurde hauptsächlich PE, neben geringeren Mengen an PP, PS und SBR gefunden. Nach einem Regenereignis war der SBR Anteil deutlich erhöht.
• Die Beprobung eines realen Wäschepostens, bestehend aus T-Shirts und Hemden mit PA/CO oder PES/CO Mischgewebe, zeigte einen PA- und PES-Austrag im Waschwasser. Der überwiegende Teil der detektierten Fasern ist aber auf Baumwolle zurückzuführen. Reine gravimetrische Messungen zur Detektion von MP führen zu einer starken Überschätzung.
• In Flaschenwasser (PET-Flaschen) konnte MP detektiert werden. PET wurde nur im stillen Mineralwasser, nicht in Mineralwasser mit Kohlensäure gefunden werden. Teilweise wurde auch das MP-Material des Verschlusses im Wasser detektiert.
• Für Luftproben konnte ein Aufbau zur größenselektiven Beprobung getestet werden.
Neben der Probenahme hat das Projekt auch gezeigt, dass die TED-GC/MS geeignet für die MP-Detektion im Routinebetrieb ist. Die TED-GC/MS konnte weiter optimiert werden. Es wurden MP-Massen bestimmt.
Im Projekt wurden erste realitätsnahe Referenzmaterialien für die MP Detektion hergestellt. Die Herstellung von realitätsnahen Polymeren in ausreichender Homogenität und Menge hat sich als große Herausforderung herausgestellt.
Preliminary results of an interlaboratory comparison on microplastics organised by plasticsfate
(2023)
Microplastics are everywhere in the environment, but analytics is challenging. Since harmonisation is missing as well es suitable reference materials, BAM did under th umbrella of VAMAS funded by the EU Horizon 2020 project PlasticsFate a ILC for microplastic detection methods. Methods adressed were IR, Raman, Py-GC/MS and TED-GC/MS. The talk gives a first presentation and evaluation on the results.
The talk summarizes challenges in microplastic analysis. It shows the preparation of microplastic reference materials as well as the testing on homogeneity and stability. The reference material is used in an international laboratory comparison to compare different detection methods used for microplastic analysis. The methods used were µ-IR (FTIR+LDIR) for number-based methods and TED-GC/MS and Py-GC/MS for mass-based methods. The ILC was done under the umbrella of VAMAS TWA 45. Results of the participants are presented.
Materials
(2022)
This presentation summarizes outcomes of the CUSP projects POLYRISK and PlasticsFatE according to thermoanalytical methods.It highlights the importants of analytical methods to measure physical and chemical properties of the test materials. These informations are neccessary for interpretation of the toxicological test results.
Der Vortrag wurde im Rahmen der Abschlusskonferenz des Forschungsschwerpunktes "Plastik in der Umwelt" des BMBF gehalten. Er fasst die Ergebnisse des Verbundprojektes RUSEKU zusammen. Es wurde die Herstellung verschiedener Testmaterialien für die Mikroplastik (MP) Analytik beschrieben. Im weiteren geht es um verschiedene Ansätze MP kostengünstig und schnell zu detektieren, z.B. mit Nahinfrarotspektroskopie. Nanoplastik konnte mit der Transmissionselektronenmikroskopie sichtbar gemacht werden. Für die praxisnahe Beprobung von Gewässern wurde die Fraktionierte Filtration entwickelt. Integrale Beprobungen können mit dem Sedimentationskasten erfolgen. Als Beispiele für die Beprobung realer Gewässer wurde das urbane Abwassersystem Kaiserslautern, Getränkewasser und Waschmaschinenwasser gezeigt.
Mikroplastik findet sich in Ozeanen, Seen, Flüssen und Bächen. Es kann in unserem Boden, in der Luft und sogar in Organismen nachgewiesen werden. Jedes Jahr werden weltweit Millionen Tonnen freigesetzt. Doch wo und wie landet Mikroplastik in der Umwelt? Und wie können wir diese winzigen Partikel nachweisen?
Material Selection Strategy
(2023)
All over the world, microplastic (MP) particles (particle size: 1 - 1.000 µm) are found in water, soil, air, biota and even food products. But plenty of these discussed findings are based on a very low number of real datasets, which are extrapolated to general projections. Furthermore, most data are not comparable because the strategies for sampling, sample preparation and detection methods are not harmonised/ or standardised. This would require extensive proficiancy tests. Because of the ubiquity presence and the unclear risks, which might arise from those particles, various political and environmental organisations (i.e. OECD, UNEP, WHO) identify the reduction of plastic entry in the environment as a key challenge for now and the future. This challenge includes the identification of relevant entry pathways but also the demand of harmonised, meaningful and reliable analytical procedures.
Regarding this task within the last few years, a fast practical solution for MP analysis has been developed, which includes the steps of representative sampling, adequate sample preparation and fast detection. Sampling is done by fractional filtration over sieves with mesh sizes of 500, 100, 50 and 5 µm [1]. The received samples are measured by ThermoExtraction/Desorption-Gas Chromatography-Mass Spectrometry (TED-GC-MS) [1,2]. for the most abundant polymers used in practice, which are polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET), polyamide (PA) and acrylate as well as styrene-butadiene-rubber (SBR), a main component of tires.
The present presentation will give first-time insight in a comprehensive dataset of microplastic analysis for an exemplary urban sewage system. MP mass contents of different waters at several days, such as greywater, stormwater retention tank, influent and effluent of a wastewater treatment plant (WWTP) within an urban sewage system in Germany are determined. Furthermore, the mass of the polymers found in dry weather and rain weather flow are compared. The use of these large datasets allows first expressive conclusions regarding the contribution of urban sewage system to the MP entry sources in the environments.
We found PP and PS in all different waters. Furthermore, there is SBR in influent and also in effluent of the WWTP. Surprisingly, we could also detect hugh amounts of PE in the effluent of the WWTP.
Detektion von Mikroplastik
(2022)
Zur Validierung und Harmonisierung von verschiedenen Methoden in der Mikroplastik-Analytik werden polymere Referenzmaterialien benötigt. In diesem Vortrag wird dargestellt, was bisher an der BAM zu Referenzmaterialien für die Mikroplastik-Analytik entwickelt wurde, wo es hingehen soll und ein Überblick über bisher gelaufene Vergleichsuntersuchungen gebracht.
The application of characterization methods with high spatial resolution to the analysis of buried coating/metal interfaces requires the design and use of model systems. Herein, an epoxy-like thin film is used as a model coating resembling the epoxy-based coatings and adhesives widely used in technical applications. Spin coating is used for the deposition of a 30 nm-thin bilayer (BL) composed of poly-(ethylenimine) (PEI) and poly[(o-cresyl glycidyl ether)-co-formaldehyde] (CNER). Fourier-transform infrared spectroscopy (FTIR) results confirm that the exposure of coated AA2024-T3 (AA) samples to the corrosive electrolyte solution does not cause the degradation of the polymer layer. In situ atomic force microscopy (AFM) studies are performed to monitor local corrosion processes at the buried interface of the epoxy-like film and the AA2024-T3 aluminum alloy surface in an aqueous electrolyte solution. Hydrogen evolution due to the reduction of water as the cathodic corrosion reaction leads to local blister formation. Based on the results of the complementary energy-dispersive X-ray spectroscopy (EDX) analysis performed at the same region of interest, most of the hydrogen evolved originates at the vicinity of Mg-containing intermetallic particles.
The aim of this study is to develop nanometer-thin epoxy-based films on aluminium alloy AA2024-T3 as a model coating system for high resolution corrosion studies. Spin coating was used for the layer-by-layer (LbL) deposition of poly-(ethylenimine) (PEI) and poly([o-cresyl glycidyl ether]-co-formaldehyde) (CNER) bilayers. The film chemistry and the cross-linking process were characterized by means of Fourier-transform infrared spectroscopy (FTIR).
Ellipsometric data confirmed the linear increase of film thickness. The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) results indicate the improvement of the film barrier properties with increasing film thickness. Mapping of the topography and the volta potential was performed by means of scanning Kelvin probe force microscopy (SKPFM).
The results indicate the presence of a homogeneous film structure, while the intermetallic phases can still be identified below the coating. The SKPFM Analysis confirmed that the model films are suitable for investigation of corrosion processes at the coating/metal interface.
The complex nature of liquid water saturation of polymer electrolyte fuel cell (PEFC) catalyst layers (CLs) greatly affects the device performance. To investigate this problem, we present a method to quantify the presence of liquid water in a PEFC CL using small-angle X-ray scattering (SAXS). This method leverages the differences in electron densities between the solid catalyst matrix and the liquid water filled pores of the CL under both dry and wet conditions. This approach is validated using ex situ wetting experiments, which aid the study of the transient saturation of a CL in a flow cell configuration in situ. The azimuthally integrated scattering data are fitted using 3D morphology models of the CL under dry conditions. Different wetting scenarios are realized in silico, and the corresponding SAXS data are numerically simulated by a direct 3D Fourier transformation. The simulated SAXS profiles of the different wetting scenarios are used to interpret the measured SAXS data which allows the derivation of the most probable wetting mechanism within a flow cell electrode.
CsCoO2, featuring a two-dimensional layered architecture of edge- and vertex-linked CoO4tetrahedra, is subjected to a temperature-driven reversible second-order phase transformation at 100 K, which corresponds to a structuralrelaxation with concurrent tilting and breathing modes of edge-sharing CoO4tetrahedra. In the present investigation, it was found that pressure induces a phase transition, which encompasses a dramatic change in the connectivity ofthe tetrahedra. At 923 K and 2 GPa, beta-CsCoO2 undergoes a first-order phasetransition to a new quenchable high-pressure polymorph,alpha-CsCoO2. It is built up of a three-dimensional cristobalite-type network of vertex-sharing CoO4 tetrahedra. According to a Rietveld refinement of high-resolution powderdiffraction data, the new high-pressure polymorph gamma-CsCoO2 crystallizes in the tetragonal space groupI41/amd:2 (Z= 4) with the lattice constants a= 5.8711 (1) and c= 8.3214 (2) A, corresponding to a shrinkage in volume by 5.7% compared with the ambient-temperature and atmospheric pressure-CsCoO2polymorph.The pressure-induced transition (beta>gamma) is reversible;-CsCoO2 stays metastable under ambient conditions, but transforms back to the-CsCoO2structure upon heating to 573 K. The transformation pathway revealed isremarkable in that it is topotactic, as is demonstrated through a clean displacive transformation track between the two phases that employs the symmetry oftheir common subgroupPb21a(alternative setting of space group No. 29 that matches the conventional-phase cell).
A series of Ca-based coordination polymers were prepared mechanochemically by milling Ca(OH)2 with phthalic acid (H2oBDC), isophthalic acid (H2mBDC), and terephthalic acid (H2pBDC). The hydrated compounds [Ca(oBDC)(H2O)], [Ca(mBDC)(H2O)3.4], and [Ca(pBDC)(H2O)3] were prepared for the first time via mechanochemical routes. The refined structures were validated by extended X-ray absorption data. The new dehydrated compound [Ca(oBDC)] (1-H2O), obtained after the thermal post-treatment of 1 in a reversible phase transition process, was determined ab initio based on the powder X-ray diffraction (PXRD) data. The materials were thoroughly characterized using elemental analysis, thermal analysis, and spectroscopic methods: magic-angle spinning NMR and attenuated total reflection-infrared spectroscopy. The specific surface areas and sorption properties of the hydrated and dehydrated samples were determined using the isotherms of gas sorption and dynamic vapor sorption measurements.