Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (2327) (entfernen)
Sprache
- Englisch (2163)
- Deutsch (143)
- Mehrsprachig (9)
- Russisch (7)
- Italienisch (2)
- Chinesisch (2)
- Portugiesisch (1)
Schlagworte
- Additive manufacturing (94)
- SAXS (67)
- Mechanochemistry (64)
- Quantum yield (61)
- Fluorescence (57)
- Nanoparticles (53)
- Corrosion (50)
- Microstructure (50)
- Nanoparticle (47)
- Laser beam welding (45)
- MALDI-TOF MS (43)
- Lifetime (41)
- Mechanical properties (41)
- Nano (38)
- Sensor (38)
- Polylactide (36)
- Small-angle X-ray scattering (34)
- Residual stress (32)
- Photophysics (31)
- Steel (31)
- Dye (29)
- Lanthanide (29)
- Wear (28)
- Crystallization (27)
- Photoluminescence (27)
- Synthesis (27)
- Additive Manufacturing (26)
- Laser-induced periodic surface structures (LIPSS) (26)
- NIR (26)
- Quality assurance (26)
- XPS (24)
- Computed tomography (23)
- Electron backscatter diffraction (23)
- Nanomaterial (23)
- Welding (23)
- EBSD (22)
- Electron microscopy (22)
- Friction (22)
- Particle (22)
- Upconversion (22)
- KorroPad (21)
- Creep (20)
- In situ (20)
- Hydrogen (19)
- Polymer (19)
- Residual stresses (19)
- SEM (19)
- XRD (19)
- Laser powder bed fusion (18)
- Mechanism (18)
- Nichtrostender Stahl (18)
- Simulation (18)
- Graphene (17)
- Korrosionsschnelltest (17)
- Laser metal deposition (17)
- Nanocomposite (17)
- Passivschicht (17)
- X-ray diffraction (16)
- Degradation (15)
- Porosity (15)
- Transmission electron microscopy (15)
- Cyclization (14)
- Fatigue (14)
- Heat treatment (14)
- Neutron diffraction (14)
- Polymers (14)
- Sintering (14)
- Upconversion nanoparticle (14)
- X-ray computed tomography (14)
- X-ray refraction (14)
- AFM (13)
- Fracture mechanics (13)
- Method (13)
- Quantification (13)
- Raman spectroscopy (13)
- Surface chemistry (13)
- Thermography (13)
- Aging (12)
- Concrete (12)
- Femtosecond laser (12)
- Nanocomposites (12)
- Oxidation (12)
- Rheology (12)
- Ring-opening polymerization (12)
- Rubber (12)
- X-ray scattering (12)
- Brightness (11)
- Energy transfer (11)
- Mechanical Engineering (11)
- Modeling (11)
- Silver nanoparticles (11)
- Solidification cracking (11)
- TED-GC/MS (11)
- TEM (11)
- Thin films (11)
- Ti-6Al-4V (11)
- Aggregation (10)
- Automation (10)
- Catalysis (10)
- Cement (10)
- Diffusion (10)
- Fatigue strength (10)
- General Materials Science (10)
- High entropy alloy (10)
- High-strength steels (10)
- Imaging (10)
- Laser processing (10)
- MOF (10)
- Mechanics of Materials (10)
- Niobium carbide (10)
- Scattering (10)
- Surface functionalization (10)
- Temperature (10)
- 3D printing (9)
- Additive Fertigung (9)
- Broadband dielectric spectroscopy (9)
- CCS (9)
- Ceramics (9)
- Composites (9)
- DNA (9)
- Glass (9)
- Gold (9)
- Laser implantation (9)
- Laser welding (9)
- Metals and Alloys (9)
- Phase transformation (9)
- Reference material (9)
- SWIR (9)
- Single particle (9)
- Adsorption (8)
- Biofilm (8)
- Coating (8)
- Composite (8)
- Cyclic R-curve (8)
- Defects (8)
- EXAFS (8)
- Femtosecond laser ablation (8)
- LIBS (8)
- Mass spectrometry (8)
- Microplastics (8)
- Nickel (8)
- Non-destructive testing (8)
- Polymerization (8)
- Polymorphism (8)
- Resistance spot welding (8)
- ToF-SIMS (8)
- Tribology (8)
- Ultrasonic-assisted milling (8)
- X-ray photoelectron spectroscopy (8)
- XANES (8)
- Aluminum alloys (7)
- Atomic force microscopy (7)
- Carbon steel (7)
- Catalyst (7)
- Characterization (7)
- Cocrystal (7)
- Diffraction (7)
- Digital image correlation (7)
- Duplex stainless steel (7)
- Durability (7)
- Electrochemistry (7)
- Energetic materials (7)
- Environment (7)
- Fatigue crack propagation threshold (7)
- Finite element method (7)
- Flame retardancy (7)
- Hardness (7)
- High-strength steel (7)
- Hydrogen embrittlement (7)
- IR (7)
- Ionic liquid (7)
- Kinetics (7)
- Korrosion (7)
- Laser ablation (7)
- MALDI TOF MS (7)
- Microscopy (7)
- Nanostructures (7)
- Numerical simulation (7)
- Portland cement (7)
- Quantum dots (7)
- Scanning electron microscopy (7)
- Semiconductor (7)
- Stainless steel (7)
- Surface (7)
- Transesterification (7)
- Ultrasound (7)
- X-ray absorption spectroscopy (7)
- Alumina (6)
- Aluminium (6)
- Bacteria (6)
- Carbon nanotubes (6)
- Compressive strength (6)
- Condensed Matter Physics (6)
- Corrosion resistance (6)
- Crack (6)
- Creep-resistant steel (6)
- Crystal (6)
- DED (6)
- DFT (6)
- Density functional theory (6)
- Dosimetry (6)
- EDS (6)
- Ellipsometry (6)
- FTIR (6)
- Geant4 (6)
- Geant4-DNA (6)
- High-entropy alloys (6)
- High-pressure (6)
- Hot cracking (6)
- Hybrid laser-arc welding (6)
- Hydrogen assisted cracking (6)
- Impurities (6)
- Infrared thermography (6)
- Iron oxide (6)
- Ligand (6)
- Liquid metal embrittlement (6)
- Luminescence (6)
- MAG welding (6)
- MIC (6)
- MOUSE (6)
- Materials Chemistry (6)
- Microcracking (6)
- Microdosimetry (6)
- NMR (6)
- Nanoindentation (6)
- Nanomaterials (6)
- Nickel alloys (6)
- Nucleation (6)
- Plastic deformation (6)
- Polycondensation (6)
- Polyethylene (6)
- Process monitoring (6)
- Process parameters (6)
- Protein (6)
- Quantum dot (6)
- Radiation damage (6)
- Radiation protection (6)
- Reliability (6)
- Reproducibility (6)
- Restraint (6)
- Ring-expansion polymerization (6)
- Selective laser melting (6)
- Silica (6)
- Size (6)
- Spectroscopic ellipsometry (6)
- Spectroscopy (6)
- Struvite (6)
- Surface modification (6)
- Synchrotron X-ray diffraction (6)
- TIG welding (6)
- Thermal expansion (6)
- Thermoelectrics (6)
- Thick-walled steel (6)
- TiO2 (6)
- Tribofilm (6)
- Widerstandspunktschweißen (6)
- Ageing (5)
- Alkali-activated materials (5)
- Application (5)
- Artificial neural network (5)
- Bioactive glass (5)
- Biomaterials (5)
- CALPHAD (5)
- Calcium sulfate (5)
- Catalysts (5)
- Cement hydration (5)
- Cermet (5)
- Computed Tomography (5)
- Copper (5)
- Cracks (5)
- Crosslinking (5)
- Crystal orientation (5)
- Damage (5)
- Editorial (5)
- Epoxy (5)
- Excitation power density (5)
- Fatigue crack growth (5)
- Flame retardant (5)
- Fracture (5)
- Functionalized graphene (5)
- GMA welding (5)
- General Chemistry (5)
- Glass transition (5)
- Graphene oxide (5)
- High entropy alloys (5)
- High strength steel (5)
- High temperature corrosion (5)
- Hybrid laser arc welding (5)
- Hydration (5)
- Inconel 718 (5)
- Integrating sphere spectroscopy (5)
- Iron (5)
- LEE (5)
- LTCC (5)
- Laserstrahlschweißen (5)
- Martensite (5)
- Metal phosphonate (5)
- Metallic glass (5)
- Modelling (5)
- Multiple crack propagation (5)
- NDT (5)
- NMR spectroscopy (5)
- Numerical modeling (5)
- Optical spectroscopy (5)
- Orientation relationship (5)
- POD (5)
- Pattern matching (5)
- Plasticity (5)
- Porous materials (5)
- Precipitation (5)
- Sample preparation (5)
- Selective laser melting (SLM) (5)
- Short crack propagation (5)
- Sicherheit (5)
- Signal enhancement (5)
- Silicon (5)
- Single crystal (5)
- Solidification (5)
- Stability (5)
- Standardization (5)
- Superalloy (5)
- Supercapacitor (5)
- Surface integrity (5)
- Switch (5)
- Synchrotron radiation (5)
- Texture (5)
- Titanium (5)
- Traceability (5)
- Viscosity (5)
- Welding simulation (5)
- Weldments (5)
- Zirconia (5)
- nanoparticle (5)
- AISI 316L (4)
- Advanced materials (4)
- Affinity chromatography (4)
- Aluminium alloys (4)
- Applications (4)
- Assay (4)
- BAMline (4)
- BODIPY (4)
- Bead (4)
- Binder Jetting (4)
- Biodiesel (4)
- Bioimaging (4)
- Cancer (4)
- Ceramic (4)
- Classification (4)
- Compression set (4)
- Cooling rate (4)
- Corrosion fatigue (4)
- Corrosion testing (4)
- Crack propagation (4)
- Critical strain (4)
- Crystalinity (4)
- DLO (4)
- Discotic Liquid Crystals (4)
- Dislocations (4)
- Druckgasbehälter (4)
- EPDM (4)
- EPR (4)
- Ectoine (4)
- Elemental composition (4)
- Environmental stress cracking (ESC) (4)
- Fatigue crack propagation (4)
- Feuerwehr (4)
- Finite element analysis (4)
- Flammability (4)
- Friction stir welding (4)
- Grain growth (4)
- HAXPES (4)
- HIP (4)
- HPLC (4)
- High alloyed steel (4)
- Hot stamping (4)
- IgG (4)
- In situ measurement (4)
- In-situ (4)
- Industrial and Manufacturing Engineering (4)
- Initial crack size (4)
- Interfacial strength (4)
- Interphase (4)
- Irradiation (4)
- Kikuchi patterns (4)
- L-PBF (4)
- Laser (4)
- Laser Powder Bed Fusion (4)
- Laser powder bed fusion (L-PBF) (4)
- Liquid Metal Embrittlement (4)
- MALDI (4)
- Machine learning (4)
- Magnetism (4)
- Metallic glasses (4)
- Metrology (4)
- Micro-computed tomography (4)
- Microplastic (4)
- Milling (4)
- Molecular dynamics (4)
- Monte-Carlo simulation (4)
- Multiplexing (4)
- NAP-XPS (4)
- NEXAFS (4)
- Nanoplastics (4)
- Nanotechnology (4)
- NbC (4)
- Neutron Diffraction (4)
- Neutron imaging (4)
- Optical probe (4)
- PDT (4)
- Phase diagrams (4)
- Phase identification (4)
- Phase transition (4)
- Phonons (4)
- Phosphates (4)
- Photocatalysis (4)
- Pitting corrosion (4)
- Polarity (4)
- Polyester (4)
- Polyglycerol (4)
- Polylactides (4)
- Polymers of intrinsic microporosity (4)
- Polyurethane (4)
- Pores (4)
- Post weld heat treatment (4)
- Probe (4)
- Qualitätssicherung (4)
- Radiography (4)
- Self-assembly (4)
- Self-healing (4)
- Small-angle x-ray scattering (4)
- Solubility (4)
- Specific heat spectroscopy (4)
- Standardisation (4)
- Stress relief cracking (4)
- Stress-strain behavior (4)
- Submerged arc welding (4)
- Surface roughness (4)
- Surface texturing (4)
- Synchrotron (4)
- Synchrotron X-ray refraction radiography (4)
- Tensile properties (4)
- Thermal analysis (4)
- TiB2 (4)
- Titanium alloy (4)
- Titanium dioxide (4)
- Toxicology (4)
- UV radiation (4)
- Weathering (4)
- Weld pool shape (4)
- X-ray (4)
- XAS (4)
- ZIF-8 (4)
- Zerstörungsfreie Prüfung (4)
- 316L (3)
- 3D-Printing (3)
- 9%Ni steel (3)
- AGIL (3)
- AIE (3)
- AIS (3)
- AISI D2 (3)
- Additive manufacturing (AM) (3)
- Adhesion (3)
- Adjustment calculation (3)
- Advanced calorimetry (3)
- Advanced high strength steels (3)
- Aggregation-induced emission (3)
- Alkali-Kieselsäure-Reaktion (3)
- Alkali-silica reaction (3)
- Alloy (3)
- Alloy 36 (3)
- Alloys (3)
- Aluminum alloy (3)
- Analysis (3)
- Anisotropy (3)
- Antibacterial (3)
- Aquifer (3)
- Artificial weathering (3)
- AuNP (3)
- Austenitic stainless steels (3)
- Automated synthesis (3)
- Bacterial adhesion (3)
- Ball milling (3)
- Barcoding (3)
- Beta decay (3)
- Betonfahrbahndecke (3)
- Betonfahrbahndecken (3)
- Bio-SAXS (3)
- Bioceramics (3)
- Bitumen (3)
- Boehmite (3)
- Bone tissue engineering (3)
- Brachytherapy (3)
- Bragg-edge imaging (3)
- Brass (3)
- Building and Construction (3)
- C-F bond activation (3)
- CFRP (3)
- Cancer treatment (3)
- Carbon dioxide (3)
- Carbon storage (3)
- Cast iron (3)
- Cell (3)
- Cellular solids (3)
- Cement paste (3)
- Ceramic matrix composites (3)
- Characterisation (3)
- Charge transfer (3)
- Chemical composition (3)
- Coarse-grained heat-affected zone (3)
- Cobalt (3)
- Cocrystals (3)
- Composite materials (3)
- Compression (3)
- Contrast agent (3)
- Corrosion Fatigue (3)
- Cosolute (3)
- Cr(III) (3)
- Crack closure (3)
- Crack growth (3)
- Cracking (3)
- Crystallographic texture (3)
- Cytotoxicity (3)
- DFG SPP 2005 (3)
- DNA damage (3)
- DNA origami (3)
- DSC (3)
- Data fusion (3)
- Deep penetration (3)
- Defect detection (3)
- Design of experiments (3)
- Deuterium (3)
- Differential scanning calorimetry (3)
- Diffusible hydrogen (3)
- Digital image correlation (DIC) (3)
- Dimensional accuracy (3)
- Direct laser writing (3)
- Directed energy deposition (3)
- Discotic liquid crystals (3)
- Dissimilar metal weld overlays (3)
- Distortion (3)
- Drug delivery (3)
- Duplex stainless steels (3)
- EDX (3)
- Ectoin (3)
- Elastic constants (3)
- Elastomers (3)
- Electrical conductivity (3)
- Electromagnetic weld pool support (3)
- Electron backscatter diffraction (EBSD) (3)
- Electron backscattered diffraction (3)
- Electron beam melting (3)
- Electron beam welding (3)
- Electronic (3)
- Electrospinning (3)
- Element transport (3)
- Element-specific spectroscopy (3)
- Embrittlement (3)
- End crater (3)
- Endurance limit (3)
- Energetic Materials (3)
- Energy deposit (3)
- Enhancement (3)
- Epoxy resin (3)
- Evolution (3)
- Explosion limits (3)
- FEM (3)
- FIB (3)
- FRET (3)
- Faserverbundwerkstoff (3)
- Finite element simulation (3)
- Fire (3)
- Flash DSC (3)
- Flexible crystals (3)
- Fluoride (3)
- Force-distance curves (3)
- Fractography (3)
- Full notch creep test (FNCT) (3)
- Functionalization (3)
- Fungi (3)
- G5P (3)
- GFRP (3)
- GVP (3)
- Gel-type electrolytes (3)
- Glass-ceramic (3)
- Gold Nanoparticles (3)
- Grain size (3)
- Green chemistry (3)
- Grinding (3)
- Heat accumulation (3)
- Heat affected zone (3)
- Heat-affected zone (3)
- High power laser beam welding (3)
- High pressure (3)
- High strength steels (3)
- High-entropy alloy (3)
- High-throughput (3)
- Hochfester Stahl (3)
- Hydrogen-assisted cracking (3)
- Hyperbranched (3)
- ICP-MS (3)
- Immunoassay (3)
- In situ studies (3)
- In vivo imaging (3)
- Inconel 625 (3)
- Infrared spectroscopy (3)
- Ink analysis (3)
- Interface (3)
- Interlaboratory comparison (3)
- Ionizing radiation damage (3)
- Isotope dilution analysis (3)
- Kikuchi diffraction (3)
- Kitagawa-Takahashi diagram (3)
- Kurdjumov-Sachs (3)
- Label (3)
- Lactide (3)
- Laser cladding (3)
- Laser hybrid welding (3)
- Laser-Pulver-Auftragschweißen (3)
- Laser-induced X-ray emission (3)
- Laser-induced periodic surface structures (3)
- Laser-induced periodic surface structures, LIPSS (3)
- Leaching (3)
- Lead ions (3)
- Life sciences (3)
- Liquid phase sintering (3)
- Low alloy steels (3)
- Low energy electrons (3)
- Lubricants (3)
- MCS (3)
- Machine Learning (3)
- Magnetic field (3)
- Magnetohydrodynamics (3)
- Mass transport (3)
- Materials (3)
- Mathematical modeling (3)
- Mechanical flexibility (3)
- Mechanical mismatching (3)
- Mechanical property (3)
- Medium entropy alloy (3)
- Melting (3)
- Metal matrix composite (3)
- Metal-organic-frameworks (3)
- Meteorite (3)
- Methodology (3)
- Micro-CT (3)
- Microalloyed steels (3)
- Microbiologically influenced corrosion (3)
- Microstructure and texture (3)
- Microstructures (3)
- Mixed ink (3)
- Molecular mobility (3)
- Monte-Carlo simulations (3)
- Multi-physical modelling (3)
- Multilayer graphene (3)
- NP (3)
- Nanostructure (3)
- Neutron scattering (3)
- Nickel-based superalloys (3)
- Niobium carbide (NbC) (3)
- Nishiyama-Wassermann (3)
- Numerical modelling (3)
- OH radical scavenger (3)
- Online monitoring (3)
- Ontology (3)
- Optical and Magnetic Materials (3)
- Orientation distribution (3)
- Oxygen evolution reaction (3)
- PDF (3)
- Papyrus (3)
- Particle size (3)
- Particle size distribution (3)
- Perovskite (3)
- Phase distribution (3)
- Phase-field (3)
- Phase-field simulation (3)
- Photooxidation (3)
- Pipeline (3)
- Pitting (3)
- Platinum (3)
- Poly(acrylic acid) (3)
- Polyethylen (3)
- Polyethylene glycol (3)
- Polymorphs (3)
- Polysaccharides (3)
- Protein A (3)
- Protein unfolding (3)
- Proton conductivity (3)
- Purification (3)
- Radiationtherapy (3)
- Radioactive decay (3)
- Rammed earth (3)
- Reactive oxygen species (3)
- Reference materials (3)
- Relative humidity (3)
- Relaxation (3)
- Renewable Energy, Sustainability and the Environment (3)
- Reporter (3)
- Residual Stress (3)
- Ring opening polymerization (3)
- Roughness (3)
- SEC (3)
- SIMS (3)
- Scaffold (3)
- Schadensanalyse (3)
- Sensing (3)
- Sensitization (3)
- Shape (3)
- Shell (3)
- Short cracks (3)
- Silver (3)
- Single-source precursors (3)
- Single-stranded DNA-binding proteins (3)
- Sliding simulation (3)
- Slow crack growth (SCG) (3)
- Small-angle scattering (3)
- Software (3)
- Solid state emission (3)
- Spark plasma sintering (3)
- Stainless Steel (3)
- Stainless steels (3)
- Strength (3)
- Stress relaxation (3)
- Surface coating (3)
- Surface plasmon resonance (3)
- Surface structuring (3)
- Surfaces (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thermal decomposition (3)
- Thermodynamics (3)
- Thin polymer films (3)
- Tool wear (3)
- Toughness (3)
- Transition metals (3)
- Twinning (3)
- UHPC (3)
- Ultra thin polymer films (3)
- Ultrafine particles (3)
- Ultrashort laser pulses (3)
- Ultrashort pulsed laser (3)
- Vacuum (3)
- Validation (3)
- Vickers indentation (3)
- Wasserstoff (3)
- Water (3)
- Weld defects (3)
- Welding residual stresses (3)
- X-ray CT (3)
- X-ray imaging (3)
- XAFS (3)
- Yb(III) complex (3)
- Young’s modulus (3)
- Zinc (3)
- Zinc coatings (3)
- Zinc oxide (3)
- Zirconium (3)
- cocrystal (3)
- fluorescence (3)
- pH (3)
- ssDNA (3)
- 100Cr6 (2)
- 1H-NMR (2)
- 2PP (2)
- 3D (2)
- 3D-printing (2)
- AISI 304L (2)
- AKR (2)
- API (2)
- ASR (2)
- Ab initio calculations (2)
- Ab initio simulation (2)
- Abrasive wear (2)
- Absolute fluorescence (2)
- Absolute fluorometry (2)
- Active thermography (2)
- Affinitätschromatographie (2)
- Aggregation induced emission (2)
- Aktive Thermografie (2)
- Aktivkohle (2)
- Al2O3 (2)
- AlSi10Mg (2)
- AlSi10Mg alloy (2)
- Alkali zinc borate glasses (2)
- Alkaline earth metal coordination polymers (2)
- Alloy 31 (2)
- Alloy design (2)
- Alloy modification (2)
- Alterung (2)
- Amorphous materials (2)
- Amphiphilicity (2)
- Amyloid (2)
- Annealing (2)
- Anodization (2)
- Antibiotics (2)
- Antibody (2)
- Antifouling (2)
- Arbeitsschutz (2)
- Archard's law (2)
- Artificial digestion (2)
- Asphalt (2)
- Atom probe tomography (2)
- Atom transfer radical polymerization (2)
- Atomic and Molecular Physics and Optics (2)
- Atomistic models (2)
- Au (2)
- Auftragschweißen (2)
- Austenite-to-martensite transformation (2)
- Austenitic stainless steel (2)
- Automated analysis (2)
- Automated expansion measurement (2)
- Automated image analysis (2)
- BET (2)
- Base damage (2)
- Base loss (2)
- Basic oxygen furnace slag (2)
- Bassanite (2)
- Baustoffe (2)
- Behavior and Systematics (2)
- Beständigkeit (2)
- Betoninstandsetzung (2)
- Binder jetting (2)
- BioSAXS (2)
- Bioactivity (2)
- Biobased polymers (2)
- Bioconjugate (2)
- Biocorrosion (2)
- Biofilms (2)
- Bismuth (2)
- Bisphenol A (2)
- Blockcopolymer (2)
- Bonding Analysis (2)
- Bone regeneration (2)
- Boson peak (2)
- Brittle fracture (2)
- Broadband Dielectric Spectroscopy (2)
- Bulge effect (2)
- Bulk metallic glasses (2)
- C-C coupling (2)
- CAFTP (2)
- CALPHAD approach (2)
- CCUS (2)
- Calcination (2)
- Calcium phosphate (2)
- Calibration (2)
- Carbon (2)
- Carbon capture and storage (2)
- Carbon fiber reinforced polymer (2)
- Carbon fibres (2)
- Carbon ink (2)
- Casting (2)
- Cell adhesion (2)
- Cellular uptake (2)
- Central venous access port (2)
- Ceramics and Composites (2)
- Ceria (2)
- Certification (2)
- Chaboche model (2)
- Charring (2)
- Chemical analysis (2)
- Chemical bonds (2)
- Chemicals classification (2)
- Circular economy (2)
- Circumferential weld (2)
- Clad steels (2)
- Cladding parameter (2)
- Cluster (2)
- Coatings (2)
- Coatings and Films (2)
- Coefficient of thermal expansion (2)
- Cold cracking (2)
- Combinatorial chemistry (2)
- Comparison (2)
- Compatibility (2)
- Complex (2)
- Complex oxides (2)
- Complication (2)
- Component assessment (2)
- Compositionally complex alloys (2)
- Computed tomography (CT) (2)
- Computer Science Applications (2)
- Condensate (2)
- Condition monitoring (2)
- Conductivity (2)
- Conservation (2)
- Constraint (2)
- Contact resonance (2)
- Coordination polymers (2)
- Coptic (2)
- Core-shell (2)
- Corrosion evolution (2)
- Corrosion protection (2)
- Corrosion rate (2)
- CrMnFeCoNi (2)
- Crack evolution (2)
- Crack initiation (2)
- Creep resisting materials (2)
- Cryogenic temperature (2)
- Crystal growth (2)
- Crystal plasticity (2)
- Crystal structure (2)
- Crystals (2)
- Curing kinetics (2)
- Curve fitting (2)
- Cutting tool (2)
- Cyanine (2)
- Cyclic loading (2)
- Cyclic softening (2)
- DFT calculation (2)
- DICTRA modeling (2)
- DLS (2)
- DMA (2)
- DNA radiation damage (2)
- Damage analysis (2)
- Damage tolerance (2)
- Dangerous goods (2)
- Data analysis (2)
- Data preparation (2)
- Data processing (2)
- Dead Sea Scrolls (2)
- Debye–Waller factor (2)
- Decarburization (2)
- Deep Learning (2)
- Deformation (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Dentistry (2)
- Depletion force (2)
- Dichtungswerkstoffe (2)
- Dielectric properties (2)
- Dielectric spectroscopy (2)
- Differential scanning calorimetry (DSC) (2)
- Diffraction elastic constants (2)
- Digestion (2)
- Digital Volume Correlation (2)
- Digital radiography (2)
- Digitalization (2)
- Dilatometry (2)
- Diopsid (2)
- Direct damage (2)
- Direct laser interference patterning (DLIP) (2)
- Directed Energy Deposition (2)
- Dislocation (2)
- Dispersity (2)
- Disposal repository (2)
- Dissimilar joints (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Distributed fiber optic sensing (2)
- Doped tin oxide (2)
- Double-strand break (DSB) (2)
- Dual phase steel (2)
- Duplex (2)
- Duplex AISI 2205 (2)
- DySEM (2)
- Dynamic Light Scattering (2)
- EBSD analysis (2)
- EOS (2)
- EPMA (2)
- ESI-TOF-MS (2)
- Earth block masonry (2)
- Ecology (2)
- Education (2)
- Elasticity (2)
- Electrocatalysis (2)
- Electrolysis (2)
- Electrolyte membrane (2)
- Electromagnetic forces (2)
- Electromagnetic weld pool control (2)
- Electron back-scattered diffraction (2)
- Electron diffraction (2)
- Electronic structure (2)
- Electronic, Optical and Magnetic Materials (2)
- Emission (2)
- Emission test chamber (2)
- Emissivity (2)
- Encoding (2)
- Energy Engineering and Power Technology (2)
- Energy dispersive diffraction (2)
- Energy dispersive x-ray spectroscopy (2)
- Engineered recycled mineral admixtures (2)
- Environmental Chemistry (2)
- Environmentally assisted cracking (2)
- Epoxy nanocomposites (2)
- Equivalent heat source (2)
- Escherichia coli (2)
- Eutectic (2)
- Evaporation (2)
- Excitation (2)
- Experimental kinetics (2)
- Explosion protection (2)
- Explosionsgrenzen (2)
- Explosivstoffe (2)
- Extended X-ray absorption fine structure (EXAFS) (2)
- FAIR (2)
- FEA (2)
- FPLC (2)
- FT-IR (2)
- Fatigue limit (2)
- Fatigue loading (2)
- Fe2TiO5 (2)
- Ferritic steels (2)
- Festigkeit (2)
- Fiber-reinforced concrete (2)
- Film thickness (2)
- Finite-element method (2)
- Flourescence (2)
- Flowability (2)
- Fluorescence standard (2)
- Foaming (2)
- Formaldehyde (2)
- Fourier series (2)
- Fracture resistance (2)
- Fracture surface energy (2)
- Fracture toughness (2)
- Fraktographie (2)
- Fuel Technology (2)
- Full penetration (2)
- GMR (2)
- GTN model (2)
- Gap bridgeability (2)
- Gas sensing (2)
- Gas separation (2)
- Gas separation membranes (2)
- Gas tungsten arc welding (GTAW) (2)
- Gefahrgutverpackung (2)
- Gel electrolytes (2)
- General Physics and Astronomy (2)
- Geometrical effect (2)
- Geothermal energy (2)
- Glass ceramic (2)
- Glass powder (2)
- Glasses (2)
- Grafting (2)
- Grain boundaries (2)
- Grain boundary (2)
- Grain boundary engineering (2)
- Grain refinement (2)
- Grain structure (2)
- Graphitization (2)
- Gypsum (2)
- HNBR (2)
- Hard x-ray photoelectron spectroscopy (2)
- Hardmetal (2)
- Hazardous chemicals (2)
- Hazardous substances (2)
- Heat conduction (2)
- Heat control (2)
- Heterogeneous catalysis (2)
- High Alloyed Steel (2)
- High temperature (2)
- High temperatures (2)
- High-density polyethylene (2)
- High-power laser beam welding (2)
- High-strength low-alloy steel (2)
- Hot crack (2)
- Hot steam (2)
- Hot-Stamping (2)
- Humidity (2)
- Hybrid welding (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration shell (2)
- Hydrogen evolution reaction (2)
- Hydroxyl radical (2)
- Hysteresis (2)
- ICP-OES (2)
- IN718 (2)
- ISO 6892-1 (2)
- Image processing (2)
- Image segmentation (2)
- Immunocapture (2)
- Immunoglobulins (2)
- Impact behaviour (2)
- Implant test (2)
- In situ PXRD (2)
- In situ diffraction (2)
- In situ monitoring (2)
- In situ real-time monitoring (2)
- Indirect damage (2)
- Indium phosphide (2)
- Ink (2)
- Instrumentation (2)
- Integrated analysis (2)
- Inter layer time (2)
- Inter-laboratory comparison (2)
- Interfacial shear strength (2)
- Interlaboratory test (2)
- Intermodulation AFM (2)
- Internal friction (2)
- Intumescence (2)
- Ionic Liquid Crystals (2)
- Ionization (2)
- Iron meteorite (2)
- Iron-gall ink (2)
- Joining dissimilar materials (2)
- Katalysator (2)
- Keyhole dynamics (2)
- Kikuchi pattern (2)
- Knoevenagel condensation (2)
- Künstliche Intelligenz (2)
- LMD (2)
- LTT weld filler materials (2)
- Lanthanides (2)
- Laser beam melting (2)
- Laser beam melting (LBM) (2)
- Laser dispersing (2)
- Laser energy distribution (2)
- Laser scanning microscopy (LSM) (2)
- Laser-induced slip casting (2)
- Laser-induced x-ray emission (2)
- Laserhybridschweißen (2)
- Lattice misfit (2)
- Lattice parameters (2)
- Lattice structures (2)
- Layerwise Slurry Deposition (2)
- Lead borate glasses (2)
- Leakage (2)
- Lifetime prediction (2)
- Liquid crystals (2)
- Llifetime (2)
- Local critical strain (2)
- Localized laser dispersing (2)
- Lochkorrosion (2)
- Lorentz force (2)
- Low cycle fatigue (2)
- Low heat input GMA welding (2)
- Low transformation temperature (2)
- Low transformation temperature (LTT) steel (2)
- Lunar regolith (2)
- MOFs (2)
- Machining (2)
- Magnesium alloy (2)
- Magnesium alloys (2)
- Magnetic nanoparticles (2)
- Magnetic resonance imaging (2)
- Magnetic stray field (2)
- Magnetocaloric effect (2)
- Mars (2)
- Martensitic stainless steels (2)
- Martensitic transformation (2)
- Matching ferritic welding electrode (2)
- Material science (2)
- Material sciences (2)
- Material synthesis (2)
- Materials informatics (2)
- McSAS3 (2)
- Measurement (2)
- Mechanical Properties (2)
- Mechanical behavior (2)
- Mechanically mixed layer (2)
- Medical implants (2)
- Melt pool dynamics (2)
- Mesoporosity (2)
- Mesoporous SiO2-CaO nanoparticles (2)
- Metal (2)
- Metal cluster (2)
- Metal fluorides (2)
- Metal magnetic memory (2)
- Metal matrix composites (2)
- Metal mixing (2)
- Metal−organic frameworks (2)
- Methane (2)
- Method development (2)
- Mg1-xZnxTiO3 (2)
- Micelle (2)
- Microbially induced corrosion (2)
- Microcracks (2)
- Microhardness (2)
- Micromechanics (2)
- Micropatterning (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure Design (2)
- Microstructure characterization (2)
- Microstructure evolution (2)
- Microwave synthesis (2)
- Mikroplastik (2)
- Modulus (2)
- Moisture (2)
- Moisture content (2)
- Moisture transport (2)
- Molecular Dynamics (2)
- Molecular imprinting (2)
- Monitoring (2)
- Monomer (2)
- Mueller-Matrix imaging ellipsometry (2)
- Multi-principal element alloys (2)
- Multi-sample analysis (2)
- Multiphoton lithography (2)
- Multiple cracks (2)
- Mussel-inspired adhesives (2)
- NIR-II (2)
- Nano-powder (2)
- Nanoconfinement (2)
- Nanocrystal (2)
- Nanoparticle concentration (2)
- Nanopatricle (2)
- Nanosensor (2)
- Native oxide (2)
- Natural rubber (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Network (2)
- Neural networks (2)
- Neutron radiography (2)
- Neutron tomography (2)
- Ni-base superalloy (2)
- Nickel-base superalloys (2)
- Nitric acid (2)
- Nitrides (2)
- Non-metallic inclusions (2)
- Nonlinearity (2)
- Normung (2)
- Nuclear waste (2)
- Numerical Simulation (2)
- Numerical process simulation (2)
- Numerische Simulation (2)
- OH Radical (2)
- OH radical (2)
- OH radicals (2)
- Oberflächenintegrität (2)
- Offshore (2)
- Online NMR spectroscopy (2)
- Optical assay (2)
- Optical detection (2)
- Optical flow (2)
- Organic Chemistry (2)
- Organic crystal (2)
- Orientation mapping (2)
- Osteogenesis (2)
- Ostwald ripening (2)
- Oxide (2)
- Oxyfuel (2)
- Oxygen evolution reaction (OER) (2)
- P92 (2)
- PIM-1 (2)
- Pacemaker (2)
- Partial penetration (2)
- Particle architecture (2)
- Particle scattering (2)
- Particle scattering simulations (2)
- Passivation (2)
- Peptide (2)
- Permeability (2)
- Permethrin (2)
- Phase field method (2)
- Phase field model (2)
- Phase stability (2)
- Phase transformations (2)
- Phosphate (2)
- Phosphine oxide (2)
- Photocatalyst (2)
- Photocatalytic activity (2)
- Photogrammetry (2)
- Photon counting detectors (2)
- Physical aging (2)
- Physical and Theoretical Chemistry (2)
- Physical and theoretical chemistry (2)
- Physical hazards (2)
- Pipe manufacturing (2)
- Plant Science (2)
- Plasma-transferred arc welding (2)
- Polyaniline (2)
- Polycaprolactone (2)
- Polycarbonate (2)
- Polydopamine (2)
- Polyesters (2)
- Polyglycolide (2)
- Polymer Testing (2)
- Polynorbornenes (2)
- Polypropylene (2)
- Post-weld heat treatment (2)
- Powder diffraction (2)
- Power density (2)
- Preceramic polymer (2)
- Prediction (2)
- Preheating (2)
- Prehydrated electron (2)
- Principal component analysis (2)
- Printing (2)
- Probability of detection (2)
- Process atmosphere (2)
- Process simulation (2)
- Properties (2)
- Protein G (2)
- Pseudobrookite (2)
- Pyrolysis (2)
- Quantitative spectroscopy (2)
- Quantum Yield (2)
- Quasi-direct damage (2)
- Quasicrystal (2)
- Quenching (2)
- Quick-EXAFS (2)
- ROPPOC (2)
- ROS (2)
- Radiation therapy (2)
- Radical (2)
- Radical Scavenger (2)
- Radiolysis (2)
- Raman (2)
- Rapid solidification (2)
- Rare earth nanoparticles (2)
- Ray tracing (2)
- Rectangular cross-section (2)
- Recycling (2)
- Reduced graphene oxide (2)
- Reference Material (2)
- Reference data (2)
- Refill friction stir spot welding (2)
- Refraction (2)
- Regeneration (2)
- Regulation (2)
- Release (2)
- Repair welding (2)
- Residual Stresses (2)
- Residual stress analysis (2)
- Resistance (2)
- Resonance testing (2)
- Reverse Monte Carlo (RMC) (2)
- Rigid amorphous fraction (2)
- Ring-opening Polymerization (2)
- Rissbildung (2)
- Rosin (2)
- S-N curve (2)
- S-Phase (2)
- S-phase (2)
- SBA-15 (2)
- SPR (2)
- SZ2080 negative photo-resist (2)
- Safety (2)
- Sample holder (2)
- Sapphire (2)
- Schmiedeteile (2)
- Schutzgasschweißen (2)
- Seam geometry (2)
- Secondary ion mass spectrometry (2)
- Selective Laser Melting (SLM) (2)
- Self-organization (2)
- Self-reactive substances (2)
- Semantic web (2)
- Semiconductor nanocrystal (2)
- Semiconductor nanocrystals (2)
- Semiconductor quantum dot (2)
- Semiconductors (2)
- Sensors (2)
- Sequential learning (2)
- Shape memory alloy (2)
- Shape-memory alloys (2)
- Shear bands (2)
- Sheep (2)
- Short-range order (2)
- Silanes (2)
- Silicon carbide (2)
- Silicon nanowire (2)
- Silicon nanowires (2)
- Silicon nitride (2)
- Simvastatin (2)
- Single pass welding (2)
- Single-crystals (2)
- Single-shot XAFS (2)
- Single-strand break (SSB) (2)
- Singlet oxygen (2)
- Sliding (2)
- Sliding friction (2)
- Small angle scattering (2)
- Small-angle xray scattering (2)
- Small-scale specimens (2)
- Sol-gel (2)
- Solid lubricants (2)
- Solid state NMR (2)
- Sorption isotherm (2)
- Spectral induced polarization (2)
- Spectroskopic Imaging (2)
- Spray drying (2)
- Sr isotopes (2)
- SrF2 (2)
- Standards (2)
- Starch (2)
- Statistical analysis (2)
- Steel and aluminium (2)
- Steel corrosion (2)
- Steels (2)
- Stiffness (2)
- Stofftransport (2)
- Stress corrosion cracking (2)
- Stress distribution (2)
- Stress exponent (2)
- Stress intensity factor (2)
- Structural dynamics (2)
- Structural health monitoring (2)
- Structural sealant glazing (2)
- Sulfidation (2)
- Sulphidation (2)
- Superalloys (2)
- Superconducting magnet (2)
- Superconducting magnets (2)
- Superellipse (2)
- Superplasticizer (2)
- Surface analysis (2)
- Surfaces, Coatings and Films (2)
- Synergy (2)
- Sythesis (2)
- TGA (2)
- TIG-welding (2)
- TKD (2)
- TPU (2)
- Temperature distribution (2)
- Temperature field (2)
- Tempered martensite-ferritic steel (2)
- Tensile loading (2)
- Ternary quantum dots (2)
- Test method (2)
- Theory (2)
- Thermal conductivity (2)
- Thermal cycles (2)
- Thermal degradation (2)
- Thermal treatment (2)
- Thermochemistry (2)
- Thermoelectric properties (2)
- Thermomechanical fatigue (2)
- Thermoplastics (2)
- Thermosets (2)
- Thin Films (2)
- Ti-Nb alloy (2)
- Time resolution (2)
- Tin acetates (2)
- Tin catalysts (2)
- Titanium alloys (2)
- Topas (2)
- Topas-MC (2)
- Topas-nBio (2)
- Torsion (2)
- Toughening mechanisms (2)
- Toxicity (2)
- Transformable steels (2)
- Transmission Kikuchi diffraction (2)
- Transmission electron microscopy (TEM) (2)
- Trinkwasser (2)
- Triplet-triplet annihilation (2)
- Tungsten carbide (2)
- Two-photon polymerization (2)
- UHMWPE (2)
- UN-GHS (2)
- Ultraschall (2)
- Ultraschallunterstütztes Fräsen (2)
- Ultrashort laser material interaction (2)
- Ultrasonic echo technique (2)
- Upconverion (2)
- Upconversion nanoparticles (2)
- Upscaling (2)
- VAMAS (2)
- VOC (2)
- Vacancies (2)
- Vakuum (2)
- Vaporization (2)
- Varestraint testing (2)
- Virus inhibition (2)
- Viscous sintering (2)
- WAAM (2)
- WAXS (2)
- Wastewater (2)
- Water content (2)
- Water speciation (2)
- Wear resistance (2)
- Weld metal (2)
- Weld pool (2)
- Weld pool dynamics (2)
- Weld toe geometry (2)
- Weldability (2)
- Welded joints (2)
- Wetting (2)
- Wire arc additive manufacturing (2)
- Wood (2)
- Wood protection (2)
- Wärmebehandlung (2)
- Wärmeführung (2)
- X-ray absorption near-edge structure (2)
- X38CrMoV5-3 (2)
- XCT (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- Young's modulus (2)
- Young´s modulus (2)
- ZIF (2)
- ZfP (2)
- Zinc borate (2)
- Zinc phosphate (2)
- Zink (2)
- ZnO nanopillars (2)
- benzamide (2)
- in situ (2)
- laser welding (2)
- mechanochemistry (2)
- neutron diffraction (2)
- resistance spot welding (2)
- theophylline (2)
- tribofilm (2)
- wear (2)
- μCT-analysis (2)
- (Mn,Ga)As crystallites (1)
- 100Cr6 (AISI 52100) steel (1)
- 100Cr6 steel (1)
- 12%Cr steel (1)
- 150 Years (1)
- 150th anniversary (1)
- 16S rRNA gene (1)
- 2,6-diaminopyridine (1)
- 2101 duplex stainless steel (1)
- 29Si (1)
- 2D (1)
- 2D Materials (1)
- 2D chromatography (1)
- 2D nanomaterial (1)
- 2D nanomaterials (1)
- 2Disk (1)
- 3-dimensional microscopy (1)
- 3D Druck (1)
- 3D Fourier Transform (1)
- 3D Scanning (1)
- 3D etching (1)
- 3D metallography (1)
- 3D printed hydrogel (1)
- 3D printer (1)
- 3D printing Polyamide 12 (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4'-hydroxyacetophenone (1)
- 4-Dimensional scanning transmission (1)
- 4D tomographic data (1)
- 60 °C-Betonversuch (1)
- 6xHis (1)
- 89Y MAS-NMR (1)
- 9-12%Cr steel (1)
- A357-T6 cast aluminum alloy (1)
- A357-T6 casting (1)
- A4F (1)
- AA2024-T3 (1)
- ABC (1)
- AC magnetic field (1)
- AC-nanochip calorimetry (1)
- ACEnano (1)
- ADA-GEL (1)
- ADXRD (1)
- AEMFC (1)
- AET (1)
- AFM cantilever vibration (1)
- AFM force spectroscopy (1)
- AFM intermittent contact (1)
- AFM tip shape (1)
- AHSS (1)
- AIS QD (1)
- AISI 321 stainless steel (1)
- AM (1)
- AM 316L stainless steel (1)
- AM feature integration (1)
- ANFO (1)
- APTES (1)
- ASP20212 (1)
- ASR modelling (1)
- ASTM (1)
- ASTM E647 (1)
- ATH (1)
- ATR-FTIR (1)
- ATZ (1)
- AZ31 (1)
- Aantimicrobial (1)
- Ab initio Simulation (1)
- Ab initio calculation (1)
- Ab initio thermodynamics (1)
- Aberfan flowslide (1)
- Abplatzen (1)
- Abrasion (1)
- Abrasive belt (1)
- Absolute (1)
- Absolute flourescence (1)
- Absolute flourometry (1)
- Absolute fluoreometry (1)
- Absorbed energy (1)
- Absorption (1)
- Absorption spectrometry (1)
- Abwasser (1)
- Accelerated concrete prism test (1)
- Accelerated temporal integration (1)
- Accelerated test (1)
- Accelerated testing (1)
- Accelerated time integration (1)
- Accelerator magnet coils (1)
- Accelerator magnets (1)
- Accoustic emission (1)
- Accuracy (1)
- Acetic acid (1)
- Acetone (1)
- Acicular ferrite (1)
- Acid corrosion (1)
- Acid resistance (1)
- Acid-leaching (1)
- Acoustic emission analysis (1)
- Acoustic emissions analysis (1)
- Acoustic insulation (1)
- Acrylamide (1)
- Activatable probe (1)
- Active Matter (1)
- Active and passive thermography (1)
- Active fibers (1)
- Actuating materials (1)
- Adaptive control (1)
- Adaptive remeshing (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacture (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing, 3D printing (1)
- Additives (1)
- Adhesion by mechanical interlocking (1)
- Adhesives (1)
- Adiabatic Flame Temperatures (1)
- Admixture (1)
- Adolf Martens (1)
- Adsorbates (1)
- Adsorbent (1)
- Adsorption of phosphate (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced Materials (1)
- Advanced Oxidation (1)
- Advanced applications (1)
- Advanced ceramic (1)
- Advanced high strength steel (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Advanced manufacturing (1)
- Advanced material (1)
- Advanced nanomaterials (1)
- Aerodynamic levitation (1)
- Affinity (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinitätsextraktion (1)
- Ag (1)
- Ag nanoparticles (1)
- Agar (1)
- Agarose (1)
- Ageing behaviour (1)
- Ageing treatment (1)
- Agglomerates (1)
- Aggregate scattering (1)
- Aggressive environments (1)
- Aging tests (1)
- Agricultural by-product (1)
- Air fragmentation (1)
- Air pollution (1)
- Air sampling (1)
- Aktiv-Passiv-Element (1)
- Akustischer Isolator (1)
- Akzeptanzwahrscheinlichkeit (1)
- Al alloys (1)
- Al-3.85%Mg alloy (1)
- Al-Composite (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-Legierung (1)
- Al-Cu-Li-alloy (1)
- Al-TM-RE (1)
- Al-alloy (1)
- Al-based alloy (1)
- Al/SiO2 composite (1)
- Al/Ti dissimilar joints (1)
- AlMg0.7SiTiB filler wire (1)
- Alanine scan (1)
- Alcium alkali phosphate (1)
- Alcohols (1)
- Aldrithiol (1)
- Algorithm (1)
- Alkali Activated Concrete (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali ingress (1)
- Alkali silica reaction (1)
- Alkali-activated binders (1)
- Alkali-activated building materials (1)
- Alkali-activated slag (1)
- Alkali-silica-reaction (1)
- Alkaline brines (1)
- Alkaline digestion reaction (1)
- Alkali–silica reaction (1)
- Alkoxysilanes (1)
- Alkyd resin-based coating (1)
- All-optical switching (1)
- Alloy Safety (1)
- Alloy addition (1)
- Alloy microstructure (1)
- Alloys' Safety (1)
- Alpha (1)
- Alpha-tricalcium phosphate (1)
- Alternating co-poly(ether pyridine)s (1)
- Alternative materials (1)
- Alternative test procedure (1)
- Alumina toughened zirconia (1)
- Aluminium fluorides (1)
- Aluminium hydroxide (1)
- Aluminium oxide (1)
- Aluminium oxide hydroxide (1)
- Aluminium teflates (1)
- Aluminium trihydroxide (1)
- Aluminiumlegierung (1)
- Aluminosilicate glasses (1)
- Aluminum Alloys (1)
- Aluminum alloy 2024-T3 (1)
- Aluminum bronze (1)
- Aluminum hydroxide (ATH) (1)
- Aluminum oxide (1)
- Ambient vibration measurements (1)
- Amine derivatives (1)
- Amino acid (1)
- Ammonium nitrate (1)
- Ammonium polyphosphate (1)
- Amorphization (1)
- Amorphous Zinc phosphate (1)
- Amorphous phases (1)
- Amorphous silica (1)
- Amperometry (1)
- Amphiphilic dumbbells (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Amplification (1)
- Analysis area measurements (1)
- Analytical Chemistry (1)
- Analytical calculation (1)
- Analytical methods (1)
- Analytical scanning electron microscopy (1)
- Analytical sciences (1)
- Ancient document production (1)
- Aneurism (1)
- Angle measurement (1)
- Anhydrite (1)
- Anion recognition (1)
- Anisotropic fiber orientation (1)
- Annealing treatment (1)
- Anode (1)
- Anodic oxidation (1)
- Anpassung (1)
- Antenna effect (1)
- Anthracene schiff base (1)
- Anti-oxidative efficiency (1)
- Antibacterial agent (1)
- Antibacterial polymer (1)
- Antibacterial properties (1)
- Antibacterial surfaces (1)
- Antibodies (1)
- Antibody Purification (1)
- Antibody coating (1)
- Antibody conjuagtes (1)
- Antibody conjugates (1)
- Antibody-gated indicator delivery (1)
- Anticancer (1)
- Antifouling surface coatings (1)
- Antifriction coefficient (1)
- Antikensammlung Berlin (1)
- Antikörper (1)
- Antimicrobial (1)
- Antimicrobial resistance (1)
- Antimony black (stibnite) (1)
- Antioxidant (1)
- Antiphase boundary (1)
- Antiviral activity (1)
- Anwendungsmöglichkeiten (1)
- Approximant (1)
- Aqdditive manufacturing (1)
- Aqueous dispersion (1)
- Aqueous quantum dot (1)
- Aqueous solution (1)
- Aqueous synthesis (1)
- Aquifer fluid (1)
- Arbeitsanleitung (1)
- Archaeology (1)
- Archaeometry (1)
- Architecture (1)
- Argon gas cluster ion sputtering (1)
- Aromatic (1)
- Aromatic organic compounds, (1)
- Aromatic pollutants (1)
- Arrhenius (1)
- Artificial Intelligence (1)
- Artificial Intelligence (AI) (1)
- Artificial cells (1)
- Artificial hip joint (1)
- Artificial intelligence (1)
- Artificial neural network modelling (1)
- Artificial neural networks (1)
- Artificial photosynthesis (1)
- Artificial turf (1)
- Aryl phosphate (1)
- As-built LPBF IN718 alloy (1)
- As-shielded arc welding (1)
- Associated incidental substances (1)
- Asymmetric coupler (1)
- Asymmetric supercapacitor (1)
- Atemschutz (1)
- Athletic tracks (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Atomic Scale (1)
- Atomic force microscope (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Au nanoparticles (1)
- Au/Ag nanoparticles, (1)
- Aufgaben (1)
- Augenbohne (1)
- Auger electron spectroscopy (1)
- Auslaugung (1)
- Ausscheidungen (1)
- Austenite (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic (1)
- Austenitic alloys (1)
- Austenitic steel 316L (1)
- Austenitic welding electrode (1)
- Autocorrelation function (1)
- Automated Bragg angle determination (1)
- Automated Purification (1)
- Automated manufacturing (1)
- Automation Bias (1)
- Automatisation (1)
- Automatische Bildbewertung (1)
- Automatische Dehnungsmessung (1)
- Automatisierte Fertigung (1)
- Automobilindustrie (1)
- Automotive application (1)
- Automotive braking (1)
- Average phase stress concentrations (1)
- Axle (1)
- Aza-BODIPY (1)
- Azimuthal projection (1)
- Azobenzene (1)
- Açaí fiber (1)
- BAM (1)
- BAM-Fallhammer (1)
- BDS broadband dielectric spectroscopy (1)
- BESSY (1)
- BIMAX42 (1)
- BLE (1)
- BODIPY probe (1)
- BOFS (1)
- BPF-LB/M (1)
- BRET/CRET (1)
- BREXIT (1)
- Back scatter (1)
- Backlight (1)
- Backscattered electron imaging (1)
- Backscattered electrons (1)
- Bacterial attachment (1)
- Bacterial lipopolysaccharides (1)
- Bacterial lysates (1)
- Bacterial second messenger (1)
- Bacteroidetes (1)
- Bainitischer Schmiedestahl (1)
- Balls-on-flat (1)
- Balls-on-rod (1)
- Band gap (1)
- Basidiomycetes (1)
- Basin (1)
- Bauteilauslegung (1)
- Bauteilschweißungen (1)
- Bawit (1)
- Bayesian technique (1)
- Bbeverages (1)
- Bead-based assay (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Bearing (1)
- Bearing steel (1)
- Behandlungsparameter (1)
- Behavior (1)
- Behmite (1)
- Belüftungselement (1)
- Benchmarking (1)
- Benchmarking study (1)
- Bending mechanism (1)
- Bending modulus (1)
- Bending property (1)
- Bending test (1)
- Benzamide (1)
- Benzoxadiazole dyes (1)
- Berstprüfung (1)
- Beschichtung (1)
- Beta particle (1)
- Beta-Eucryptite (1)
- Beta-eucryptite (1)
- Beton (1)
- Betriebsfestigkeit (1)
- Biaxial strength (1)
- Biegefestigkeit (1)
- Biegesteifigkeit (1)
- Bifunctionality (1)
- Bildverarbeitung (1)
- Bimetallic frameworks (1)
- Bimetallic noble metal nanoparticles (1)
- Bimetallkorrosion (1)
- Bimodal size distribution (1)
- Binary zinc alloys (1)
- Binders (1)
- Binders/binding (1)
- Binding molecule (1)
- Bio Ceramic (1)
- Bio Ceramics (1)
- Bio active ceramic (1)
- Bio lubricants (1)
- Bio-based concrete (1)
- Bio-ceramic engineering (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Biobased (1)
- Biocidal product (1)
- Biocides (1)
- Biocomposites (1)
- Bioconjugation (1)
- Biodegradable implant (1)
- Biodeterioration (1)
- Bioengineering (1)
- Bioerosion (1)
- Biofilm formation (1)
- Biofilm quantification (1)
- Biofouling (1)
- Biofuel cells (1)
- Biofuels (1)
- Biofunctional Molecules (1)
- Biogene Schwefelsäurekorrosion (1)
- Biogenic acid corrosion (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Bioinformatics (1)
- Bioinspiration (1)
- Biokraftstoffe (1)
- Biological & biomedical applications (1)
- Biological structure (1)
- Biomarker (1)
- Biomass (1)
- Biomedical application (1)
- Biomedical engineering (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomimicry (1)
- Biomineralisation (1)
- Biomineralization (1)
- Bionic materials (1)
- Biopolymer (1)
- Biopolymers (1)
- Bioreceptivity (1)
- Bioresorbable Biomaterials (1)
- Biosensing (1)
- Biosensor (1)
- Biosensors (1)
- Bioseparation (1)
- Biosourced isosorbide (1)
- Biotechnology (1)
- Biphasic calcium phosphate (1)
- Bipyramid (1)
- Bismuth Ferrite (1)
- Bismuth titanates (1)
- Bisphenol-A bis(diphenyl)phosphate (BDP) (1)
- Bitter technique (1)
- Bitumen und bitumenhaltige Bindemittel (1)
- Bituminous material (1)
- Black phosphorus (1)
- Bloch wall (1)
- Block copolymer (1)
- Bluetooth Low Energy (1)
- Boehmite nanoparticles (1)
- Bond energy (1)
- Bone grafting (1)
- Bone marrow extrusion (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Bone screws (1)
- Bone substitutes (1)
- Borate glasses (1)
- Boratgläser (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Borosilicate Glass (1)
- Borosilicate glass (1)
- Borosilicatglas (1)
- Borosilikatglas (1)
- Boundary element method (1)
- Boundary lubrication (1)
- Bragg angles (1)
- Bragg peak (1)
- Bragg-edge (1)
- Bragg-edge neutron 2D imaging (BENI) (1)
- Brake pad materials (1)
- Braking load history (1)
- Brand (1)
- Brazil nut Mesocarp (1)
- Bremse (1)
- Bremsleitung (1)
- Bremsstrahlung (1)
- Brilliant Blue R (1)
- Brillouin (1)
- Brinell hardness (1)
- Brithtness (1)
- Brittle materials (1)
- Broadband Dielectric Spectrscopy (1)
- Broadband dielectric microscopy (1)
- Brominated carbon nanotubes (1)
- Brown-rot fungi (1)
- Bruchflächen (1)
- Bruchlastwechselzahlen (1)
- Bruchmechanik (1)
- Brunauer-Emmett-Teller (1)
- Brushite-forming calcium phosphate cement (1)
- Bubble formation (1)
- Build-up strategy (1)
- Building Materials (1)
- Building materials (1)
- Building with earth (1)
- Building-blocks (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effect (1)
- Bulging effects (1)
- Bulk temperature (1)
- Bundesanstalt für Materialforschung und -prüfung (1)
- Buried interfaces (1)
- Burst (1)
- Butt welds (1)
- Bystander effect (1)
- C&D waste (1)
- C-di-GMP (1)
- C-dot (1)
- C. lap-shear (1)
- C7H15N2O4P (1)
- CALPHAD database analysis (1)
- CCMat (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CCT diagrams (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CEC-L-103 (1)
- CFD model (1)
- CFD simulation (1)
- CFK (1)
- CFR-PEEK (1)
- CLP-Verordnung (1)
- CLP-regulation (1)
- CMAS (1)
- CMT welding (1)
- CNTs (1)
- CO adsoprtion (1)
- CO2 (1)
- CO2 + n-alkanes (1)
- CO2 lasers (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- CO2-storage (1)
- COK-12 (1)
- COOH rich surfaces (1)
- COSMO (1)
- CRP (1)
- CSS-42L (1)
- CT (1)
- CUINS2 nanocrystals (1)
- Cable (1)
- Cabon capture and storage (1)
- Cadmium and lead remediation (1)
- Calamistrum (1)
- Calcined clay (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate (1)
- Calcium alkali orthophosphate materials (1)
- Calcium cobaltite (1)
- Calcium monofluoride (1)
- Calcium phosphate bone cement (1)
- Calcium silicate (1)
- Calcium silicate hydrate (1)
- Calcium sulfoaluminate (CSA) cement (1)
- Calcium sulfoaluminate cement (1)
- Calcium-carbonate (1)
- Calculated intrinsic fracture toughness (1)
- Calibrated fluorescence measurements (1)
- Caloric effects (1)
- Caloric properties (1)
- Calorimetry (1)
- Cancer therapy (1)
- Cantilever microprobe (1)
- Capillary absorption (1)
- Capillary electrophoresis (1)
- Capillary waves (1)
- Carbamazepine (1)
- Carbide (1)
- Carbide phase NbC (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon Nanomembranes (1)
- Carbon black (1)
- Carbon capture (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide emissions (1)
- Carbon dioxide footprint (1)
- Carbon dioxide reduction (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon fibre reinforced composite (1)
- Carbon fibres nanotubes interface (1)
- Carbon footprint (1)
- Carbon ions (1)
- Carbon materials (1)
- Carbon nano-onion (1)
- Carbon nanodots (1)
- Carbon nanoparticles (1)
- Carbon nanotube (1)
- Carbon-based nanomaterials (1)
- Carbon-fluorine bonds (1)
- Carbonate substrate (1)
- Carbonation (1)
- Carbonitride (1)
- Carboxyl group (1)
- Carboxylative cyclization of propargyl alcohols (1)
- Carolingian (1)
- Carrier (1)
- Carrier gas hot extraction (1)
- Carrier plasmas (1)
- Carrier protein (1)
- Carrier-Material (1)
- Casing (1)
- Cassical nucleation theory (1)
- Casting skin (1)
- Castings (1)
- Catalogues (1)
- Catalyst layer (1)
- Catalytic activity (1)
- Catalytic fixation of carbon dioxide (1)
- Catch and release assay (1)
- Catechol (1)
- Catheters (1)
- Cationic photocuring (1)
- Cationization (1)
- Cavitation (1)
- Ccs (1)
- CdS (1)
- CdSe (1)
- CdSe/ZnS quantum Dots (1)
- Cell appendages (1)
- Cell size (1)
- Cell studies (1)
- Cell-envelope (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Cellular structures (1)
- Cellular substructure (1)
- Cellulose (1)
- Cellulose acetate (1)
- Cellulose synthase (1)
- Cement admixtures (1)
- Cement injection (1)
- Cement-based composites (1)
- Central Taurus (1)
- Ceramic materials (1)
- Ceramic matrix composite (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certified reference nanomaterials (1)
- Chalcogenides (1)
- Chalcopyrite (1)
- Changes with time (1)
- Channeling (1)
- Chapetti’s and IBESS model (1)
- Characterization and analytical techniques (1)
- Characterization of corrosion layers (1)
- Charakterisierung (1)
- Charge density (1)
- Charge-to-size-ratio (1)
- Charpy Impact Test (1)
- Charpy Transition Curve (1)
- Charpy impact toughness (1)
- Charpy pendulum impact test (1)
- Charpy toughness (1)
- Chelate (1)
- Chemical admixtures (1)
- Chemical durability (1)
- Chemical processes (1)
- Chemically Complex Materials (1)
- Chemically complex alloy (1)
- Chemikalienrecht (1)
- Chemisch instabile Gase (1)
- Chemisches Recycling (1)
- Chemisorption (1)
- Chemo-mechanical coupling (1)
- Chemometrics (1)
- Chemometrie (1)
- Chemotherapy (1)
- Chemputer (1)
- Chiral (1)
- Chitosan (1)
- Chlorbutylkautschuk (1)
- Chrystal orientation (1)
- Chunky graphite (1)
- Cimensional Accuracy (1)
- Circular dichroism (1)
- Citizen Science (1)
- Civil and Structural Engineering (1)
- Clay ISRU (1)
- Cleavable linker (1)
- Clerodin (1)
- Climate (1)
- Climate simulation concrete prism test (1)
- Clinker relicts (1)
- Clustered nanoparticles (1)
- Clustering (1)
- Co (1)
- Co-Cr-alloy (1)
- Co-crystal (1)
- Co-firing (1)
- Co-planar translational laminography (1)
- Co2-Storage (1)
- CoO (1)
- Coaggregation (1)
- Coarse grained heat affected zone (1)
- Coating materials (1)
- Cob (1)
- Cobald based alloy (1)
- Cobalt (III) Schiff base complex (1)
- Cobalt and zinc oxides (1)
- Cobalt-chromium alloy (1)
- Coconut fiber (1)
- Coda Wave Interferometry (1)
- Coda Wave Interferometry (CWI) (1)
- Coda wave interferometry (1)
- Codes and standards (1)
- Codex (1)
- Coefficient of friction (1)
- Coherent exchange (1)
- Cohesive finite elements (1)
- Cohesive zone (1)
- Cold cracking safety (1)
- Cold metal transfer process (1)
- Cold rolling (1)
- Cold-welding (1)
- Collection (1)
- Colloidal semiconductor nanocrystals (1)
- Color (1)
- Color coding (1)
- Color key (1)
- Color tuning (1)
- Colored glasses (1)
- Colour center (1)
- Colourants (1)
- Colouring (1)
- Column holder (1)
- Column percolation (1)
- Columnar Liquid Crystal (1)
- Columnar crystal growth (1)
- Combinatorial peptide library (1)
- Combinatorial polymer libraries (1)
- Combined non-linear hardening with cyclic loading (1)
- Combined sewer system (1)
- Commercialization (1)
- Community composition (1)
- Comparability (1)
- Compatibility evaluation (1)
- Compatible solute (1)
- Complementary methodology and metrology (1)
- Complex Molecular Systems (1)
- Complex formation (1)
- Complex structures (1)
- Complex-shape (1)
- Component design (1)
- Component test (1)
- Component-like test (1)
- Components influence (1)
- Composite material (1)
- Composition (1)
- Compositional complex alloys (1)
- Compositionally complex alloy (1)
- Compressed earth (1)
- Compression behavior (1)
- Compression strength (1)
- Compression stress relaxation (1)
- Compression test (1)
- Compression testing (1)
- Compression tests (1)
- Compressive test (1)
- Computational Materials Science (1)
- Computational Mechanics (1)
- Computational mechanics (1)
- Computational model for unsaturated flow (1)
- Computations (1)
- Computed thomography (1)
- Computer simulation (1)
- Computer vision (1)
- Computertomographie (1)
- Concentration (1)
- Concentration step (1)
- Concrete Prism Test at 60 °C (1)
- Concrete pavement (1)
- Concrete pavements (1)
- Concrete's porosity (1)
- Conductive carbon tape (1)
- Conductometry (1)
- Conductor-like screening model (1)
- Cone calorimeter (1)
- Conference (1)
- Confined catalyst (1)
- Confinement (1)
- Confocal microscopy (1)
- Confocal raman imaging (1)
- Conjugate (1)
- Conjugates (1)
- Construction (1)
- Construction product (1)
- Construction products (1)
- Consumer products (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Contact pressure (1)
- Contact resistance (1)
- Contaminated soils (1)
- Contamination (1)
- Continuum damage mechanics (1)
- Contour scan strategy (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Controlled radical polymerization (1)
- Conversion (1)
- Conversion of results (1)
- Convolutional neural network (1)
- Convolutional neural networks (1)
- Convolutional neural networks (CNN) (1)
- Coordinate measurement machine (1)
- Coordinate transformation (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolyester (1)
- Copolymer sequence (1)
- Copolymerization (1)
- Copper hydroxide (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coputed tomography (1)
- Cordierite (1)
- Core shell structure (1)
- Core-clusters (1)
- Core-shell nanoparticles (1)
- Core-shell structures (1)
- Core/shell quantum dot (1)
- Core–shell particles (1)
- Core−shell particles (1)
- Correlative analysis (1)
- Correlative tomography (1)
- Corrosion costs (1)
- Corrosion environment (1)
- Corrosion inhibitor (1)
- Corrosion investigations (1)
- Corrosion mechanism (1)
- Corrosion monitoring (1)
- Corrosion pits (1)
- Corrosion product (1)
- Corrosivity category (1)
- Corundum (1)
- Coulomb explosion (1)
- Counterpart materials (1)
- Coupled generalized nonlinear Schrödinger equation (1)
- Coupling (1)
- Covalend functionalization (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- Cr complex (1)
- CrCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack closure effect (1)
- Crack closure mechanisms (1)
- Crack criterion (1)
- Crack detection (1)
- Crack driving force (1)
- Crack growth in air (1)
- Crack healing (1)
- Crack initiation period (1)
- Crack opening displacement (1)
- Crack tip opening displacement (1)
- Crack-tip constraint (1)
- Cracks grouting (1)
- Crater (1)
- Creation-relaxation algorithm (1)
- Creep behavior (1)
- Creep damage (1)
- Creep deformation (1)
- Creep mechanisms (1)
- Creep models (1)
- Creep resistant steel (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Creep-resisting materials (1)
- Crevice corrosion (1)
- Cribellate spiders (1)
- Cristobalite frameworks (1)
- Critical chloride content (1)
- Critical distance (1)
- Critical energy release rate (1)
- Critical micelle concentration (CMC) (1)
- Critical pitting temperature (1)
- Critical strain rate (1)
- Crop protection products (1)
- Cross-sectioning (1)
- Crosslinking density (1)
- Crown-abutment connection (1)
- Cryo milling (1)
- Cryoadsorption (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Cryogenic einvironment (1)
- Cryogenic steel (1)
- Crystal Engineering (1)
- Crystal Texture (1)
- Crystal branch development (1)
- Crystal class (1)
- Crystal engineering (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystal phase determination (1)
- Crystal plasticity finite element modeling (CPFEM) (1)
- Crystal-growth (1)
- Crystalline admixture (1)
- Crystalline cones (1)
- Crystalline defects (1)
- Crystallinity (1)
- Crystallization sequence (1)
- Crystallographic descriptor (1)
- Crystallographic texture control (1)
- Crystallography (1)
- Crystalstructure (1)
- Cu catalysts (1)
- CuNPs (1)
- Cube slip (1)
- Cubical shape (1)
- Cultural heritage (1)
- Cupriavidus metallidurans (1)
- Curie temperature (1)
- Cuticle (1)
- Cutting forces (1)
- Cuttlefish (1)
- Cyanophenyl molecules (1)
- Cyclic (1)
- Cyclic J-integral (1)
- Cyclic R-curve analysis (1)
- Cyclic Voltammetry (1)
- Cyclic reuse (1)
- Cyclic steam oxidation (1)
- Cyclic stress-strain curve (1)
- Cyclic traffic loading and mechanical pre-damage (1)
- Cyclic voltammetry (1)
- Cyclics (1)
- Cyclisation (1)
- Cycloaddition (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cycloparaphenylenes (1)
- Cyclopolymerization (1)
- Cylindrical turning (1)
- Cysteine (1)
- Cytocompatibility (1)
- Cytoplasm (1)
- C–C coupling (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- D7755-11 (1)
- DCB (1)
- DCB geometry (1)
- DED-EB (1)
- DED-LB (1)
- DED-arc (1)
- DEM (1)
- DFT calculations (1)
- DFT calculations of Raman spectra (1)
- DIC (1)
- DIN EN 16516 (1)
- DIP transfer (1)
- DMSO (1)
- DNA/RNA (1)
- DNPH (1)
- DOPO (1)
- DPA (1)
- DRIFTS (1)
- DSB (1)
- DSS (1)
- DSSC (1)
- DTAB (1)
- Damage detection (1)
- Damage detection and localisation (1)
- Damage evolution (1)
- Damage prediction (1)
- Damage variable (1)
- Damping factor (1)
- Darkfield microscopy (1)
- Data Interoperability (1)
- Data Processing (1)
- Data Set (1)
- Data correction (1)
- Data curation (1)
- Data driven design (1)
- Data evaluation methods (1)
- Data fitting (1)
- Data infrastructures (1)
- Data mapping (1)
- Data readiness level (1)
- Data-driven material design (1)
- Data-driven materials design (1)
- Database (1)
- Datenbank (1)
- De novo peptide sequencing (1)
- Dealloying (1)
- Debonding (1)
- Debye scattering equation (1)
- Debye-Waller-Faktor (1)
- Decachlorotetrasilane (1)
- Decarbonisation (1)
- Decay kinetics (1)
- Decay time (1)
- Decision support (1)
- Deep learning (1)
- Deep learning-based tools (1)
- Deep penetration laser beam welding (1)
- Deep reactive ion etching (1)
- Defect density (1)
- Defect photoluminescence (1)
- Defects engineering (1)
- Definition (1)
- Deformation mechanisms (1)
- Deformed geometry (1)
- Degradable polymer (1)
- Degradation mechanisms (1)
- Degradation of polyethylene (1)
- Degradation signatures (1)
- Degradation studies (1)
- Degradative processes (1)
- Delamination (1)
- Demolition wastes (1)
- Dendrimer (1)
- Dendrimersomes (1)
- Dendrite growth (1)
- Dendritic amphiphile (1)
- Dendritic polyglycerol (1)
- Denoising filter (1)
- Dense alumina (1)
- Density Functional Theory (1)
- Density functional theory (DFT) (1)
- Density measurement (1)
- Density of states (1)
- Density separation (1)
- Density-based Model (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Dental (1)
- Dental materials (1)
- Dentin (1)
- Dentine (1)
- Deposition microstructure (1)
- Deposition rate (1)
- Deposition welding (1)
- Depth profiling (1)
- Depth resolved XANES (1)
- Desiccation (1)
- Desiccation resistance (1)
- Design of experiment (1)
- Desorption (1)
- Destabilization (1)
- Developing building materials (1)
- Deviatoric (1)
- Dezincification (1)
- Diagnostic Antibodies (1)
- Diaspore (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Dielectric breakdown (1)
- Dielectric ceramic (1)
- Dielectric heating (1)
- Dielectric materials (1)
- Dielectrics (1)
- Diesel (1)
- Diesel Fuel (1)
- Diesel particulates filter (1)
- Different electrochemical conditions (1)
- Different load cases (1)
- Differential scheme (1)
- Diffraction Enhanced Imaging (1)
- Diffraction analysis (1)
- Diffraction contrast neutron imaging (1)
- Diffraction peak width (1)
- Diffraction-elastic constants (1)
- Diffractive gratings (1)
- Diffusion/diffusivity (1)
- Diffusons (1)
- Digital Image Correlation (1)
- Digital detector arrays (1)
- Digital holographic cytometry (1)
- Digital representations (1)
- Digital workflows (1)
- Digitale Bildkorrelation (DIC) (1)
- Digitalisierung (1)
- Digitization (1)
- Dilution (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Dimorphs (1)
- Dipole moment (1)
- Dipole polarisation (1)
- Dipsersive XAS (1)
- Direct Energy Deposition (1)
- Direct energy deposition (1)
- Direct laser deposition (1)
- Direct laser interference patterning (1)
- Directed Energy Depositio (1)
- Directional grain growth (1)
- Disc brakes (1)
- Discontinuities (1)
- Disinfectants (1)
- Disinfection Fuel (1)
- Dislocation avalanches (1)
- Dislocation density (1)
- Dislocation structure (1)
- Dislocation-climb-controlled creep (1)
- Disorder (1)
- Dispersion (1)
- Dispersion process (1)
- Dispersive XAS (1)
- Dispersive-XAS (1)
- Displacement (1)
- Dissimilar friction stir welding (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Dissimilar welding (1)
- Dissolution (1)
- Distance transform (1)
- Distortion upon baseplate removal (1)
- Ditigtal image correlation (1)
- Docking (1)
- Dodecanethiol (1)
- Dokumentation (1)
- Domain Ontology Development (1)
- Domain wall (1)
- Doped ZnO nanostructures (1)
- Double complex compound (1)
- Double complex salts (1)
- Double notched creep specimen (1)
- Double punch test (DPT) (1)
- Double-pulse experiments (1)
- Doubly charged ions (1)
- Down Stream Processing (1)
- Downstream Processing (1)
- Downstream processing (1)
- Drehen (1)
- Drinking water (1)
- Druck (1)
- Druckkraft (1)
- Druckschwellenversuch (1)
- Druckstabilität (1)
- Drug (1)
- Dry DNA (1)
- Dry preparation (1)
- Dry sliding (1)
- Drywood termite (1)
- Dual Energy Imaging (1)
- Dual emission (1)
- Dual sensing (1)
- Dual-color labeling glycan (1)
- Dual-core fibre (1)
- Dual-core photonic crystal fiber (1)
- Dual-environment (1)
- Ductile cast iron (1)
- Ductile damage (1)
- Ductile iron (1)
- Duplex steel (1)
- Duplex steels (1)
- Durability testing (1)
- Durchstrahlungsprüfung (1)
- Dust explosions (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-time (1)
- Dye degradation (1)
- Dyes (1)
- Dyes and pigments (1)
- Dynamic fracture mechanics (1)
- Dynamic glass transition (1)
- Dynamic heterogeneity (1)
- Dynamic light scattering (1)
- Dynamic load (1)
- Dynamic recrystallization (1)
- Dynamic testing (1)
- Dynamic vapor sorption (1)
- Dynamical simulation (1)
- Dynamische Tests (1)
- E10 (1)
- EA4T steel (1)
- EBAM (1)
- EBSD pattern (1)
- ECD-Aktorschicht (1)
- EDTAD (1)
- EIS (1)
- ELISA (1)
- EM-clustering (1)
- EN 16807-2016:12 (1)
- EN AW-2618A (1)
- EPMA (Electron Probe Microanalysis) (1)
- EPS (1)
- ESCA (1)
- ESI MS (1)
- ESR (1)
- EU-CLP (1)
- EVA (1)
- Early oxidation (1)
- Early stages (1)
- Early sulfidation (1)
- Earth block (1)
- Earth block masonry (EBM) (1)
- Earth blocks (1)
- Earth masonry (1)
- Earth mortar (1)
- Earthen construction (1)
- Earthworms (1)
- Economic wide technology replacement (1)
- Ectoine hydration (1)
- Eddy current testing (1)
- Eddy-current testing (1)
- Edge quality (1)
- Editorial Board (1)
- Effect of scanning strategies (1)
- Effective irradiation dose 0.2-16 [Gy] (1)
- Effective properties (1)
- Egypt (1)
- Eigenspannungen (1)
- Eigenvalue problem derivatives (1)
- Eindeutige Kennzeichnung (1)
- Eindringtechnik (1)
- Einseitenschweißung (1)
- Einzelzellanalyse (1)
- Eisenaluminid (1)
- Elastic Crystal (1)
- Elastic behavior (1)
- Elastic energy (1)
- Elastic follow-up (1)
- Elastic membrane (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elastic waves (1)
- Elastic-moduli (1)
- Elastic-plastic fracture mechanics (1)
- Elastin (1)
- Elastomer (1)
- Elastomer Dichtung (1)
- Elastomere (1)
- Electric conductivity (1)
- Electrical connectors (1)
- Electrical insulators (1)
- Electrical properties (1)
- Electrical resistance (1)
- Electro-fused zirconia (1)
- Electro-plated nickel coatings (1)
- Electro-thermomechnical model (1)
- Electroceramics (1)
- Electrochemical CO2 conversion (1)
- Electrochemical behavior (1)
- Electrochemical catalysts (1)
- Electrochemical characterisation (1)
- Electrochemical deposition (1)
- Electrochemical deposition (ECD) (1)
- Electrochemical methods (1)
- Electrochemical permeation (1)
- Electrochemical potentiodynamic reactivation (1)
- Electrochemical potentiokinetic reactivation (1)
- Electrochemical sensing (1)
- Electrochemical titration (1)
- Electrochemical treatment (1)
- Electrode geometry (1)
- Electrodes (1)
- Electrohydraulic effect (1)
- Electroless Ni-P (1)
- Electromagnetic (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic influence (1)
- Electromagnetic scattering (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic theories (1)
- Electromagnetic weld pool support system (1)
- Electron Rutherford backscattering (1)
- Electron beam (1)
- Electron beam cladding (1)
- Electron beam powder bed fusion (1)
- Electron density map (1)
- Electron energy (1)
- Electron irradiation 30 [kV] (1)
- Electron microscopy, transmission (1)
- Electron probe microanalysis (1)
- Electron probe microanalysis (EPMA) (1)
- Electron tomography (1)
- Electron transport (1)
- Electronic, optical and magnetic materials (1)
- Electrons (1)
- Electrophoresis (1)
- Electrospray ionization polymers (1)
- Electrospun nanocomposite fiber (1)
- Electrostatic filter ash (1)
- Elektrochemie (1)
- Elektrolyse (1)
- Elektromagnetische Badstütze (1)
- Elektromagnetische Schmelzbadunterstützung (1)
- Elemental fingerprints (1)
- Elevated temperatures (1)
- Ellman (1)
- Embedded electronics (1)
- Emission chamber (1)
- Emission enhancement (1)
- Emission standards (1)
- Emission testing (1)
- Emissionsprüfung (1)
- Emisssivity (1)
- Enamel (1)
- Enamels (1)
- Encapsulation (1)
- Endothelial progenitor cell (1)
- Endurance Limit (1)
- Energetic reference parameter (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy distribution (1)
- Energy efficiency (1)
- Energy input (1)
- Energy materials (1)
- Energy parameters of the arc (1)
- Energy storage (1)
- Energy systems (1)
- Energy-dispersive x-ray spectroscopy (1)
- Enhancement strategy (1)
- Enthalpy of solution (1)
- Enthalpy of sublimation (1)
- Entsorgung gefährlicher Stoffe (1)
- Entwicklung (1)
- Environmental Stress Cracking (1)
- Environmental benefits (1)
- Environmental conditions (1)
- Environmental effect (1)
- Environmental effects (1)
- Environmental impact categories (1)
- Environmental impacts (1)
- Environmental stress cracking (1)
- Enzymatic degradation (1)
- Epitaxial films (1)
- Epitaxial thin films (1)
- Epitaxy (1)
- Epoxy Resin (1)
- Epoxy composites (1)
- Epoxy conversion degree (1)
- Epoxy resins (1)
- Epoxy system (1)
- Equal area projection (1)
- Equilibration (1)
- Equilibrium relaxation (1)
- Equivalent stress concentration factors (1)
- Er(III) (1)
- Ermüdungsverhalten (1)
- Ernel average misorientation (KAM) (1)
- Error correction (1)
- Error sources analysis (1)
- Estrogenic activity of plastic nanoparticles (1)
- Etal-complexes (1)
- Etalon feature (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- Ettringit (1)
- Eu (1)
- European Centre (1)
- European Materials Research Society (E-MRS) (1)
- European Metrology Networks (EMNs) (1)
- European funding strategies (1)
- European regulation (1)
- Europium (1)
- Evaporite deposits (1)
- Evolution of bulk properties (1)
- Ex vivo (1)
- Ex-situ (1)
- Ex-situ X-ray computed tomography (1)
- Excess surface work (1)
- Exchange interaction (1)
- Exchange length (1)
- Excitation energy dependence (1)
- Excitation power density dependence (1)
- Excitation spectra (1)
- Exciton (1)
- Exfoliation (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Experimental design (1)
- Experimental determination (1)
- Experimental procedure (1)
- Explainability (1)
- Explosion (1)
- Explosions (1)
- Explosionsgefährliche Eigenschaften (1)
- Explosionsschutz (1)
- Explosivbearbeitung (Plattieren, Härten) (1)
- Explosive spalling (1)
- Explosive welding (1)
- Explosives (1)
- Explosivstoffrichtlinie (1)
- Exposed metal sites (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- External alkalis (1)
- External load test (1)
- Extracellular matrix (1)
- Extrapolation (1)
- Extreme environments (1)
- Extrusion (1)
- F pili (1)
- FAIR Data Management (1)
- FAIR data (1)
- FAIR research data management (1)
- FAIRification (1)
- FAME (1)
- FAT class (1)
- FAT class approach (1)
- FAT class concept (1)
- FEM Simulation (1)
- FEM simulation (1)
- FFF (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFT (1)
- FIB Tomography (1)
- FIB patterning (1)
- FKM (1)
- FLASH effect (1)
- FLIM (1)
- FNCT (1)
- FSDC (1)
- FT-IR spectroscopy (1)
- FT-Raman (1)
- FTIR-Spektroskopie (1)
- Fabrication (1)
- Fabrication parameters (1)
- Faceting (1)
- Facilitated activation (1)
- Factor analysis (1)
- Fahrbahnbeton (1)
- Fail-safe design (1)
- Failure probability (1)
- False-positive results (1)
- Family archives (1)
- Far-infrared spectroscopy (1)
- Faseroptik-Sensoren (1)
- Faserverbundwerkstoffe (CFK, GFK) (1)
- Fast Scanning Calorimetry (1)
- Fast measurement (1)
- Fast scanning calorimetry (1)
- Fast scanning calormetry (1)
- Fast single pulse response (1)
- Fatigue Strength (1)
- Fatigue Testing (1)
- Fatigue assessment (1)
- Fatigue behavior (1)
- Fatigue crack (1)
- Fatigue crack initiation (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue life (1)
- Fatigue life time (1)
- Fatigue performance (1)
- Fatigue propagation threshold (1)
- Fatigue properties (1)
- Fatigue strength and life (1)
- Fatigue striations (1)
- Fatigue tests (1)
- Fe (1)
- Fe-Mn steels (1)
- Fe3O4 (1)
- Fe3O4 nanoparticles (1)
- FeNi (1)
- Femtosecond laser processing (1)
- Femtosecond laser-processing (1)
- Fenton (1)
- Fenton-like reaction (1)
- Fermi resonance (1)
- Ferrihydrite (1)
- Ferrite (1)
- Ferrite integration (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic/martensitic steel (1)
- Ferritic–martensitic steel (1)
- Ferroelectric (1)
- Ferroelectricity/ferroelectric materials (1)
- Ferroic cooling (1)
- Ferromagnetic steel (1)
- Ferromagnetic steels (1)
- Ferromagnetism (1)
- Ferrous phosphate hydrate (1)
- Ferumoxytol (1)
- Festigkeitssteigerung (1)
- Feuchtemessung (1)
- Feuchtesorption (1)
- Feuchtetransport (1)
- Feuerwiderstand (1)
- Fiber Bragg grating (1)
- Fiber Bragg grating (FBG) (1)
- Fiber laser (1)
- Fiber optic sensors (1)
- Fiber orientation (1)
- Fiber reinforced dental post (1)
- Fiber toxicology (1)
- Fiber-reinforced composite (1)
- Fiber/matrix bond (1)
- Fiberglass composite (1)
- Fibre reinforced composites (1)
- Fibre reinforced plastic (1)
- Fibre release (1)
- Fibre/matrix bond (1)
- Field flow fractionation (1)
- Field sensor (1)
- Filler wire (1)
- Filler wire mixing (1)
- Film (1)
- Film replacement (1)
- Filmersatz durch digitale Detektoren (1)
- Filter (1)
- Filter crucible (1)
- Fine-grained Steel (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (FE) (1)
- Finite element method (FEM) (1)
- Finite element modelling (1)
- Finite-element simulation (1)
- Finland (1)
- Fire behavior (1)
- Fire property assessment (1)
- Fire residue (1)
- Fire retardancy (1)
- Fire retardant (1)
- Fire spalling (1)
- First derivative (1)
- Flame inhibition (1)
- Flame propagation (1)
- Flame retardance (1)
- Flame retardancy mechanism (1)
- Flame retardants (1)
- Flammability limits (1)
- Flammable Gas (1)
- Flammable Liquid (1)
- Flange width (1)
- Flaschenventile (1)
- Flash temperature (1)
- Flaw assessment procedures (1)
- Flaw detection (1)
- Flaw interaction (1)
- Flexible (1)
- Flexible Magnetic Sensors (1)
- Flexible waveguide (1)
- Flexural rigidity (1)
- Flow Chemistry (1)
- Flow cytometry (1)
- Flow system (1)
- Flue gas desulphurisation facilities (1)
- Fluid transport (1)
- Fluid-flow (1)
- Fluid-rock interactions (1)
- Fluidity (1)
- Fluoranthene (1)
- Fluorapatite-gelatin nanocomposites (1)
- Fluorescence intensity ratio (1)
- Fluorescence label (1)
- Fluorescence lifetime (1)
- Fluorescence probe (1)
- Fluorescence spectroscopy (1)
- Fluorescence spectroscopy and imaging (1)
- Fluorescent dye (1)
- Fluorescent label (1)
- Fluorescent probe (1)
- Fluorides (1)
- Fluorination (1)
- Fluorine coordination (1)
- Fluorine coordination polymers (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorophore (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Focused ion beam tomography (1)
- Food Science (1)
- Foot crack (1)
- Force microscopy (1)
- Force-distance-curve (1)
- Formaldehyd (1)
- Formation (1)
- Formic acid (1)
- Four-point bending test (1)
- Fractal (1)
- Fractal Microstructure (1)
- Fractals (1)
- Fractional brownian motion (1)
- Fractographic observations (1)
- Fracture Mechanics (1)
- Fracture assessment (1)
- Fracture energy (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture-Toughness (1)
- Fragility (1)
- Free electron laser (1)
- Free polymer (1)
- Free weathering (1)
- Freeze casting (1)
- Frequency domain (1)
- Fresh Concrete (1)
- Fresnel reflection (1)
- Fresnoite (1)
- Friction Stir Welding (1)
- Friction braking (1)
- Friction stir processing (1)
- Frost salt attack (1)
- Frozen state photopolymerization (1)
- Fräsbearbeitung (1)
- Fuel sorption (1)
- Fuell cells (1)
- Full Notch Creep Test (1)
- Full notch creep test (1)
- Full penetration welding (1)
- Full-field phase tomography (1)
- Full-notch creep test (FNCT) (1)
- Fullerene (1)
- Fullerene C60 (1)
- Fully aromatic frameworks (1)
- Functional Materials (1)
- Functional group analysis (1)
- Functional group quantification (1)
- Functional properties (1)
- Functionalized nanographene (1)
- Functionally graded porous scaffolds (1)
- Fundamental zone (1)
- Fungal decay (1)
- Funktionale Betonoberfläche (1)
- Funtional Groups (1)
- Fusion Zone (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- Future‑oriented standards (1)
- GAPSI 16 (1)
- GC-FID (1)
- GHS (1)
- GMA surfacing (1)
- GMAW (1)
- GMAwelding (1)
- GMR sensors (1)
- GTA welding (1)
- GTAW (1)
- GTR 13 (1)
- GUR (1)
- GaAs (1)
- GaP (1)
- Gadolinium (1)
- Galvanized steel (1)
- Gamma (1)
- Gamma irradiation (1)
- Gamma ray (1)
- Gandolfi method (1)
- Gap bridging (1)
- Gas flow assisted powder deposition (1)
- Gas metal arc welding (1)
- Gas permeability (1)
- Gas permeation (1)
- Gas sensors (1)
- Gas separation membrane (1)
- Gas shielded arc welding (1)
- Gas solubility (1)
- Gas sorption (1)
- Gas tungsten arc welding (1)
- Gase (1)
- Gaspermeation (1)
- Gastrointestinal barrier (1)
- Gated hybrid material (1)
- Gear (1)
- Gefahrgruppen (1)
- Gefahrstoff (1)
- Gefahrstoffrecht (1)
- Gefahrstoffverordnung (1)
- Gefährlicher Stoff (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- Gel (1)
- Gel electrophoresis (1)
- Gelartige Elektolyte (1)
- Gelartige Elektrolyte (1)
- Gene five protein (1)
- Gene-5 protein (1)
- General Chemical Engineering (1)
- General Computer Science (1)
- General Energy (1)
- General Engineering (1)
- General Environmental Science (1)
- General Medicine (1)
- General analytical solutions (1)
- General energy (1)
- Genetic algorithm (1)
- Geochemistry (1)
- Geology (1)
- Geometric descriptor (1)
- Geometrical factors (1)
- Geometrical model (1)
- Geopolymerbeton (1)
- Geosynthetics (1)
- Geothermal (1)
- Geothermal environment (1)
- Geothermie (1)
- Germylium ions (1)
- Geteilte Infrastruktur (1)
- Getting started (1)
- Giant magnetoresistance (1)
- Girders (1)
- Giulio Romano (1)
- Glasmonolith (1)
- Glass Ceramic (1)
- Glass Support (1)
- Glass crystallization stress (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming (1)
- Glass transition temperature (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Glazed tiles (1)
- Gleeble experiments (1)
- Gleeble testing (1)
- Global stability criterion (1)
- Globally Harmonized System of Classification and Labelling of Chemicals (1)
- Globally harmonized system of classification and labelling of chemicals (1)
- Glow discharge processes (1)
- Glucose (1)
- Glue (1)
- Glycolide (1)
- Gnomonic projection (1)
- Gnomonic projections (1)
- Gold nanocluster (1)
- Gold nanoclusters (1)
- Gold nanoparticles (1)
- Governance (1)
- Grade S960QL steel (1)
- Gradient elution (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary sliding (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain pest beetles (1)
- Granules (1)
- Graphen (1)
- Graphen Oxide (1)
- Graphene Oxide (1)
- Graphene powder (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphit (1)
- Graphite (1)
- Graphite furnace (1)
- Graphite induced hysteresis (1)
- Graphite modules (1)
- Grating (1)
- Grating interferometry (1)
- Gravimetry (1)
- Grazin exit XANES (1)
- Grease (1)
- Grease lubrication (1)
- Greek curse tablets (1)
- Green facades (1)
- Green synthesis (1)
- Green urban construction (1)
- Green-Death solution (1)
- Greenhouse gas mitigation (1)
- Greens function method (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Grooving (1)
- Ground penetrating radar (1)
- Growth competition (1)
- Growth defects (1)
- Growth kinetics (1)
- Growth rate (1)
- Guided waves (1)
- Gurson model (1)
- Gussteilprüfung (1)
- Gutachten (1)
- Gypsum' SAXS (1)
- Gyroid lattice (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HAZPRED (1)
- HCF (1)
- HERFD-XAS (1)
- HF (1)
- HF-shuttle (1)
- HPC (1)
- HR-CS-MAS (1)
- HR-SEM (1)
- HSC (1)
- HSLA (1)
- HSQ (1)
- HT22 (1)
- HTMS (1)
- Hackathon (1)
- Halbleiterphysik (1)
- Halide Perovskites (1)
- Halloysite nanotubes (1)
- Halogen bond (1)
- Halogen bond interaction (1)
- Halogen-free (1)
- Haltezeit (1)
- Hard Carbon (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Hard materials (1)
- Hard metals (1)
- Hard object collisions (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Hardening (1)
- Hardly separable problem (1)
- Hardness measurement (1)
- Hardystonite (1)
- Hartmann effect (1)
- Hastelloy X (1)
- Hausbockkäfer (1)
- Hausner ratio (1)
- HeLa (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat diffusion (1)
- Heat flow (1)
- Heat flux estimation (1)
- Heat generation (1)
- Heat input (1)
- Heat saturation function (1)
- Heat transfer (1)
- Heat-affected zone softening (1)
- Heat-resistant nickel alloys (1)
- Heated concrete (1)
- Heating (1)
- Heating oil with 10 % FAME (1)
- Heavy chains (1)
- Heavy metal free (1)
- Heavy metals (1)
- Hebrew studies (1)
- Heizöllagerbehälter (1)
- Helium (1)
- Hematite (1)
- Henry's law constant (1)
- Heory (1)
- Hermopolis (1)
- Hertzian cracks (1)
- Hessian analysis (1)
- Heterodyning (1)
- Heterogeneity (1)
- Heterostructure field effect transistor (1)
- Heusler alloys (1)
- HexaHis-Tag (1)
- Hexachlorodisilane (1)
- Hexagonally-arranged nano-protrusions (1)
- Hi-Tension (1)
- Hibbingite (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High - temperature (1)
- High Cycle Fatigue (1)
- High Cycle Fatigue (HCF) (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High Strength Concrete (1)
- High brightness (1)
- High density polyethylene (1)
- High ductility (1)
- High energy synchrotron diffraction (1)
- High interstitial austenitic steel (1)
- High performance liquid chromatography (1)
- High power (1)
- High power welding (1)
- High process speeds (1)
- High resolution (1)
- High specific surface area (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High throughput (1)
- High- viscosity PMMA cement (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-Power Welding (1)
- High-Speed Separations (1)
- High-density polyethylene (PE-HD) (1)
- High-performance concrete (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-pressure high-temperature (1)
- High-pressure hydrogen environment (1)
- High-pressure solubility (1)
- High-resolution (1)
- High-strength fine-grained steels (1)
- High-strength steel filler metal (1)
- High-strength steel sheets (1)
- High-strength structural steel (1)
- High-temperature ceramics (1)
- High-temperature fuel cells (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-throughput computations (1)
- High-voltage testing (1)
- Highly permeably polynorbornenes (1)
- Highspeed (1)
- Highspeed-plasma-laser-cladding (1)
- High‐nitrogen steel (1)
- High‐temperature corrosion (1)
- Hipims (1)
- His6 (1)
- His8 (1)
- Historical earthen building (1)
- Ho(III) (1)
- Hochfeste Feinkornbaustähle (1)
- Hochleistungsbeton (1)
- Hochleistungskeramik (1)
- Hochtemperatureigenschaften (1)
- Hohlprofilknoten (1)
- Hold time (1)
- Holy Family (1)
- Holzschutz (1)
- Holzschutzmittel (1)
- Homogeneity (1)
- Homogenization (1)
- Homogenization schemes (1)
- Host–guest systems (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hot pressing (1)
- Hot spot (1)
- Hot stage microscopy (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Human Factors (1)
- Human Plasma (1)
- Human factors (1)
- Human umbilical cell adhesion (1)
- Hybrid Laser Arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Manufacturing (1)
- Hybrid composite (1)
- Hybrid composite pressure vessel (1)
- Hybrid laser-arc weld (1)
- Hybrid manufacturing (1)
- Hybrid metrology (1)
- Hybrid metrology measurement (1)
- Hybrid nanoparticles (1)
- Hybrid repair (1)
- Hybridschweißen (1)
- Hydantoin (1)
- Hydrates (1)
- Hydration kinetics (1)
- Hydration products (1)
- Hydration stoppage (1)
- Hydrochemical evolution (1)
- Hydrodefluorination (1)
- Hydrofluorination (1)
- Hydrogarnet (1)
- Hydrogel (1)
- Hydrogen Storage (1)
- Hydrogen adsorption storage (1)
- Hydrogen assisted stress corrosion cracking (1)
- Hydrogen dependent mechanical properties (1)
- Hydrogen diffusion (1)
- Hydrogen diffusivity (1)
- Hydrogen storage (1)
- Hydrogen trapping (1)
- Hydrogen-containing hot gas (1)
- Hydrogenated nanostructures (1)
- Hydrophilic ionic liquid (1)
- Hydrophilicity (1)
- Hydrophobic interaction (1)
- Hydrophobic interaction chromatography (1)
- Hydrophobicity (1)
- Hydrophobin (1)
- Hydrothermal Ageging (1)
- Hydrothermal treatment (1)
- Hydrous glass (1)
- Hydroxyectoine (1)
- Hydroxylellestadite (1)
- Hygrothermal (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperbranched polymers (1)
- Hypergolic ionic liquids (1)
- Hysteresis measurement (1)
- Hystersis (1)
- Härteprüfung (1)
- I-shape sections (1)
- IASCC (1)
- IBESS (1)
- IBESS Approach (1)
- IBESS model for short cracks (1)
- IMAC purification (1)
- IN 718 (1)
- IN718 PBF-LB/M (1)
- IN725 (1)
- INCONEL 718 (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- IRHD microhardness (1)
- ISO 12108 (1)
- ISO 9223 (1)
- ISRU (1)
- ITS region (1)
- Identification (1)
- Identifizierung von Additiven (1)
- IgG determination (1)
- Ignition criterion (1)
- Image analysis (1)
- Image registration (1)
- Image-based analysis (1)
- Imaging XPS (1)
- Imaging ellipsometry (IE) (1)
- Imaging plates (1)
- Imaging technique (1)
- Immobilisierung (1)
- Immunglobulin (1)
- Immunglobuline (1)
- Immunoaffinity extraction (1)
- Immunoassays (1)
- Immunoprecipitation (1)
- Immunosensor (1)
- Impact Sensitivity (1)
- Impact absorbed energy (1)
- Impact damage (1)
- Impact factor (1)
- Impact loading (1)
- Impact wear (1)
- Impacts (1)
- Imperfektion (1)
- Implant material (1)
- Implant-supported prostheses (1)
- Implants (1)
- Impurity segregation (1)
- In situ EXAFS (1)
- In situ Raman (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ XRD (1)
- In situ alloying (1)
- In situ atomic force microscopy (1)
- In situ bending tests (1)
- In situ coupling (1)
- In situ near-infrared (NIR) spectroscopy (1)
- In situ reactions (1)
- In situ strain (1)
- In situ synchrotron x-ray diffraction (1)
- In situ tensile test (1)
- In situ thermal-annealing experiment (1)
- In vitro tests (1)
- In vivo (1)
- In-Situ X-ray CT (1)
- In-line Monitoring (1)
- In-situ Computed Tomography (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SAXS/WAXS (1)
- In-situ SEM micro shear deformation (1)
- In-situ analysis (1)
- In-situ characterization of GDLs (1)
- In-situ composites (1)
- In-situ neutron diffraction (1)
- In-situ phase analysis (1)
- In-situ process monitoring (1)
- In-situ scattering (1)
- In-situ synchrotron X-ray computed tomography (1)
- In-situ synchrotron X-ray radiography (1)
- In-vivo (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inclusions (1)
- Incoming goods control (1)
- Inconel 686 (1)
- Inconel 939 (1)
- Incorrect classification (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Indenter area function (1)
- Indenter modulus (1)
- Indium (1)
- Indoor air quality (1)
- Induction heating (1)
- Industrial application (1)
- Industrial applications (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Inelastic background (1)
- Inelastic neutron scattering (1)
- Inertisation (1)
- Inertisierung (1)
- Infection (1)
- Inflammation (1)
- Information Systems (1)
- Infrared nano AFM (1)
- Infrastructure (1)
- Inhibition rate constant (1)
- Initial shear strength (1)
- Ink analyses (1)
- Ink corrosion (1)
- Inkjet (1)
- Inline NMR Spectroscopy (1)
- Innenhydrophobierung (1)
- Innenraumluft (1)
- Innovation (1)
- Innovationsrecht (1)
- Inorganic polymers (1)
- Insecticide (1)
- Insoluble content (1)
- Instrument compliance (1)
- Instrumental analysis of ink (1)
- Instumented indentation test (1)
- Insulators (1)
- Integrated Processes (1)
- Integrated alignment features (1)
- Integrating sphere (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Intensity (1)
- Inter-layer time (1)
- Interdiffusion (1)
- Interdisciplinarity (1)
- Interfaces (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interfacial stability (1)
- Intergranular cracking (1)
- Intergranular strain (1)
- Intergranular strength (1)
- Interlaboratory comparability (1)
- Interlabority comparison (1)
- Interlayer delay (1)
- Intermediate phases (1)
- Intermetallic (1)
- Intermetallic compound (1)
- Intermetallic phases (1)
- Intermetallics (1)
- Intermittent microplasticity (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stress (1)
- Interpass temperature (1)
- Interphase residual stress (1)
- Intrinsic OER activity (1)
- Intrinsic fatigue propagation threshold (1)
- Intrinsic stress (1)
- Intrinsically conducting polymers (1)
- Invar (1)
- Inverse Design (1)
- Inverse analysis (1)
- Inverse design techniques (1)
- Inverse heat transfer problem (1)
- Inverse problem (1)
- IoT (1)
- Iodine (1)
- Ion beam erosion Sectioning (1)
- Ion beam implantation (1)
- Ion beam therapy (1)
- Ion implantation (1)
- Ionic liquid crystal (1)
- Ionic liquid crystalls (1)
- Ionic porosity (1)
- Ionic stregth (1)
- Ionisation (1)
- Iridium compounds (1)
- Iridium-titanium mixed oxides (1)
- Iron alloys (1)
- Iron aluminide (1)
- Iron carbide (1)
- Iron gall ink (1)
- Iron making (1)
- Iron meteorites (1)
- Iron nanoparticles (1)
- Iron nitride (1)
- Iron ore tailings (1)
- Iron oxide films (1)
- Iron oxide nanoparticles (1)
- Iron oxides (1)
- Iron reducing bacteria (1)
- Iron speciation (1)
- Iron-oxo oligomers (1)
- Iron–chromium–nickel alloy (1)
- Irreversible adsorption (1)
- Irreversible polycondensation (1)
- Isosorbide (1)
- Isostatic hot pressing (HIP) (1)
- Isothermal (1)
- Isotope dilution mass spectrometry (1)
- JMAK model (1)
- Jahrestag (1)
- Janus dendrimers (1)
- Joining technology (1)
- Joints/joining (1)
- Journal (1)
- K+ doped (1)
- K-nearest neighbor (1)
- K-rich Birnessite (K0.45MnO2) (1)
- KCl (1)
- KI (1)
- Kaltrisse (1)
- Kaltzähe Stähle (1)
- Katoite (1)
- Keramik (1)
- Kerbspannungskonzept (1)
- Keyhole collapse (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Kinematic approach (1)
- Kinetic study (1)
- Kinetics from experiments (1)
- Kirchhoff migration (1)
- Kitagawa-Takahashi (K-T) diagram (1)
- Kl (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Knowledge spillovers (1)
- Knudsen Effusion Mass Spectrometry (KEMS) (1)
- Knufia petricola (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kokillenguss (1)
- Konferenzbericht (1)
- Konzentrationselement (1)
- Korrosionsprüfung (1)
- Korrosionsschutz (1)
- Korund (1)
- Kraftstoffe mit und ohne biogene Anteile (1)
- Kreislaufwirtschaft (1)
- Krypton (1)
- Kupferazid (1)
- Kupferlegierungen (1)
- Kältemittel (1)
- Körperschall (1)
- L-PBF IN718 material (1)
- L-lactide (1)
- LA-ICP-SFMS (1)
- LC-MS (1)
- LCF (1)
- LCF region (1)
- LED phosphors (1)
- LET (1)
- LIBS TIG welding (1)
- LL equation (1)
- LLG (1)
- LME (1)
- LPBF (1)
- LPSO (1)
- LPSO Phase (1)
- LTT (1)
- LTT Weld Filler Materials (1)
- LTT filler metal (1)
- La(Fe,Si)13 phase (1)
- Lab-on-a-chip (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Laboratory X-ray diffraction (1)
- Laboratory XµCT (1)
- Laboratory energy-dispersive X-ray diffraction (EDXRD) (1)
- Lack-of-fusion (1)
- Lactides (1)
- Lacunary Keggin ion (1)
- Laminated metallic composites (1)
- Laminates (1)
- Laminography (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Landau Lifshitz Gilbert equation (1)
- Landau Lifshitz equation (1)
- Landslide propagation modelling (1)
- Langsame Berstprüfung (1)
- Lanthanide-doped nayf-4 (1)
- Lanthanides doped coordination polymers (1)
- Lanthanoide (1)
- Large Language model (1)
- Large animal model (1)
- Large volume samplers (1)
- Large-pore (1)
- Large-scale processing (1)
- Large-scale test (1)
- Laser Beam Welding (1)
- Laser Implantation (1)
- Laser Infrared thermography (1)
- Laser Machining (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Processing (1)
- Laser Welding (1)
- Laser beam Welding (1)
- Laser beam welding (LBW) (1)
- Laser beam weliding (1)
- Laser cleaning (1)
- Laser cutting (1)
- Laser damage (1)
- Laser direct writing (1)
- Laser energy absorption (1)
- Laser heated pedestal growth (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser metal fusion (1)
- Laser methods (1)
- Laser powder bed fusion (LPBF) (1)
- Laser powder-based directed energy deposition (1)
- Laser powder-bed fusion (1)
- Laser surfacing (1)
- Laser-Pulver-Auftragsschweißen (1)
- Laser-based additive manufacturing (1)
- Laser-hybrid welding (1)
- Laser-induced breakdown spectroscopy (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced redox reactions (1)
- Laser-material interactions (1)
- Laser-metal-deposition (1)
- Laser-modified surface (1)
- Laser-thermal shock (1)
- Laserschweißen (1)
- Lastwechselprüfung (1)
- Lateral flow assay (1)
- Lateral flow test (1)
- Lateral resolution (1)
- Lattice distortion (1)
- Lattice distortions (1)
- Lattice enthalpy (1)
- Lattice parameter determination (1)
- Lattice rotation (1)
- Lattice structure (1)
- Lattices (1)
- Laves phase (1)
- Layer-by-Layer (1)
- Layer-by-layer deposition (1)
- Layer-wise slurry deposition (1)
- Layered double hydroxide (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Layerwise slurry deposition (1)
- Leaching of alkalis (1)
- Lead (1)
- Lead isotope composition (1)
- Lead isotopes (1)
- Lead-free (1)
- Lead-free ceramics (1)
- Leak-tightness (1)
- Leakage rate (1)
- Lean duplex (1)
- Lean duplex stainless steel (1)
- Least-squares adjustment (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lebensdauervorhersage (1)
- Legierungsmodifikation (1)
- Legionella (1)
- Lewis superacids (1)
- Lewis-acids (1)
- LiYF4 (1)
- Library and Information Sciences (1)
- Life cycle assessment (1)
- Life cycle assessment (LCA) (1)
- Life prediction (1)
- Life time prediction (1)
- Life-cycle assessment (1)
- Lifetime analysis (1)
- Liftetime (1)
- Ligand exchange (1)
- Ligands (1)
- Ligandsubstitution (1)
- Light chains (1)
- Light curing (1)
- Light harvesting (1)
- Light-harvesting (1)
- Lightweight structures (1)
- Lignin (1)
- Lignin modification (1)
- Lignosulfonates (1)
- Lime based grout (1)
- Limestone powder (1)
- Limit of detection (1)
- Limiting oxygen concentration (1)
- Lindemann criterion (1)
- Line scan (1)
- Linear polyglycerol (1)
- Linked open data (1)
- Liquid Crystal (1)
- Liquid Crystals (1)
- Liquid Metal Embrittlement (LME) (1)
- Liquid chromatography (1)
- Liquid chromatography at critical conditions (1)
- Liquid crystal (1)
- Liquid petroleum products (1)
- Liquid spattering (1)
- Liquid-liquid-phase-separation (1)
- Liquid-metal embrittlement (1)
- Literature survey (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Lithium-ion battery (1)
- Lithium-sulfur battery (1)
- Lithography-based technologies (1)
- Livermore model (1)
- Lizard (1)
- Load Partition (1)
- Load partition (1)
- Load transfer (1)
- Load-bearing behaviour (1)
- Local Weld Geometry (1)
- Local corrosion (1)
- Local fatigue spproaches (1)
- Local structure (1)
- Localised corrosion (1)
- Localized Laser Dispersing (1)
- Localized surface plasmon resonance (1)
- Lokale Effekte (1)
- Long-Term Monitoring (1)
- Long-term aging (1)
- Long-term storage (1)
- Longitudinal weld (1)
- Lonic liquid (1)
- Lorentz forces (1)
- Lotuseffekt (1)
- Low Reynolds number swimmers (1)
- Low Transformation Temperature filler wire (1)
- Low blow (1)
- Low carbon steel (1)
- Low expansion (1)
- Low feed rates (1)
- Low heat input Gma welding (1)
- Low melting glasses (1)
- Low strain (1)
- Low temperature (1)
- Low themperature (1)
- Low transformation temperature filler materials (1)
- Low transformation temperature filler wire (1)
- Low wear/high wear transition (1)
- Low-carbon construction (1)
- Low-cement concrete (1)
- Low-cost (1)
- Low-loading (1)
- Lubricant additives (1)
- Lubricant films (1)
- Lubricated contact (1)
- Lubricated sliding (1)
- Luminescent lifetime (1)
- Luorescence (1)
- Lupolen (1)
- Lysozyme (1)
- Lötrissigkeit (1)
- Lüftung (1)
- L‐PBF (1)
- MAG Welding (1)
- MALDI mass spectrometry (1)
- MALDI-TOF (1)
- MALDI-TOF MS/MS (1)
- MAPbI3 perovskites (1)
- MCA-modeling (1)
- MCC (1)
- MCNP (1)
- MEMS (1)
- MGS-1 regolith simulant (1)
- MHD (1)
- MOF-74 (1)
- MOF´s (1)
- MRFA (1)
- MRT (1)
- MS (1)
- MST (1)
- MVT (1)
- MWCNT (1)
- MWIR (1)
- Mach-Zehnder interferometer (1)
- Machine learning optimization (1)
- Machine learning segmentation (1)
- Machine vision (1)
- Macrocycles (1)
- Macrophage (1)
- Macroscopic stress (1)
- Magic-sized cluster (1)
- Magmatic and hydrothermal processes (1)
- Magnesium (1)
- Magnesium Alloy (1)
- Magnesium hydroxide (1)
- Magnesium-gadolinium alloy (1)
- Magnet coupling (1)
- Magnetic (1)
- Magnetic Nanoparticles (1)
- Magnetic anisotropy (1)
- Magnetic bath support (1)
- Magnetic domain distribution (1)
- Magnetic hyperthermia (1)
- Magnetic interacion (1)
- Magnetic materials (1)
- Magnetic moment (1)
- Magnetic nanocomposites (1)
- Magnetic properties (1)
- Magnetic shape memory (1)
- Magnetic stray fields (1)
- Magnetische Nanopartikel (1)
- Magnetite nanoparticles (1)
- Magnetization dynamics (1)
- Magneto-structural transition (1)
- Magnetocaloric materials (1)
- Magnetoeleastic couplin (1)
- Magnetohydrodynamics (MHD) (1)
- Magnetomechanical effect (1)
- Magnetpartikel (1)
- Magnetron sputtering (1)
- Magnéli phase (1)
- Mandible (1)
- Manganese (1)
- Manufacturing (1)
- Manuscript (1)
- Manuscript studies (1)
- Manuscripts (1)
- Map production and publishing (1)
- Mapping (1)
- Mapping for unseparable load (1)
- Maps and colours (1)
- Marangoni flow (1)
- Marble deterioration (1)
- Marble sculptures (1)
- Margin design (1)
- Marine atmosphere (1)
- Market access (1)
- Martensitic stainless steel (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Martin Seah (1)
- Maskinteknik (1)
- Masonry (1)
- Masonry tower (1)
- Mass contents (1)
- Mass loss (1)
- Matching ferritic filler metal (1)
- Material (1)
- Material Acceleration Platforms (MAPs) (1)
- Material and damage behaviour (1)
- Material chemistry (1)
- Material defects (1)
- Material degradation (1)
- Material design (1)
- Material extrusion (MEX) (1)
- Material failure (1)
- Material modeling (1)
- Material parameter identification (1)
- Material properties (1)
- Material-binding Peptides (1)
- Materialkennwerte (1)
- Materials Characterization (1)
- Materials Modelling (1)
- Materials Properties (1)
- Materials Science (1)
- Materials Stability (1)
- Materials Testing (1)
- Materials by design (1)
- Materials characterization (1)
- Materials chemistry (1)
- Materials database (1)
- Materials science (1)
- Materials science and engineering (1)
- Materialuntersuchung (1)
- Matrix influence (1)
- Matrix residual stress (1)
- Matter reorganization theories (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Measurement uncertainty (1)
- Measuremment uncertainty (1)
- Mechanical Load (1)
- Mechanical Sensitivity (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical analysis (1)
- Mechanical anisotropy (1)
- Mechanical deformation (1)
- Mechanical properties of the joints (1)
- Mechanical response (1)
- Mechanical strength (1)
- Mechanical testing (1)
- Mechanical-technological properties (1)
- Mechanically flexible crystals (1)
- Mechanically flexible molecular crystals (1)
- Mechanicalproperties (1)
- Mechanische Eigenschaften (1)
- Mechanochemical pictographs (1)
- Mechanochemical synthesis (1)
- Mechanophotonics (1)
- Medical imaging (1)
- Medium Entropy Alloys (1)
- Medium entropy alloys (1)
- MefHySto (1)
- Melamine poly(metal phosphate) (1)
- Melanised microcolonial fungi (MCF) (1)
- Melt dripping (1)
- Melt pool boundary (1)
- Melt pool defects (1)
- Melt pool depth (1)
- Melt pool monitoring (1)
- Melt-extraction technique (1)
- Membrane (1)
- Membrane polymers (1)
- Membranes (1)
- Merocyanine (1)
- Meso Portland cement (1)
- Mesocrystal (1)
- Mesoporous Silica (1)
- Mesoporous films (1)
- Mesoporous iridium oxide films (1)
- Mesoporous particles (1)
- Mesoporous phosphate-based glasses (1)
- Mesoporous thin films (1)
- Meta material (1)
- Metadata (1)
- Metal Magnetic Memory (1)
- Metal Matrix Composites (1)
- Metal Organic Frameworks (1)
- Metal additive manufacturing (1)
- Metal additive manufacturing (MAM) (1)
- Metal and alloys (1)
- Metal carbides (1)
- Metal foam (1)
- Metal halides (1)
- Metal nanoparicels (1)
- Metal organic framework (1)
- Metal organic frameworks (1)
- Metal oxides (1)
- Metal phosphonates (1)
- Metal-organic frameworks (1)
- Metal-organic polyhedra (1)
- Metal-oxides (1)
- Metal-semiconductor (1)
- Metallic materials (1)
- Metallic matrix pad (1)
- Metallic vapour plume (1)
- Metallschutzgasschweißen (1)
- Metals (1)
- Metal–organic frameworks (1)
- Metastable (1)
- Metastable phases (1)
- Metasurface (1)
- Methanogen (1)
- Methanogene (1)
- Method evaluation (1)
- Methods (1)
- Methods of scientific analysis (1)
- Methoxytrimethlsilane (1)
- Methyl group rotation (1)
- Metrology in Chemistry and Biology (1)
- Mg-Y-Zn Alloy (1)
- Micro analysis (1)
- Micro-CT scanning (1)
- Micro-asperity (1)
- Micro-shrinkages (1)
- Microalloyed Steels (1)
- Microalloyed steel (1)
- Microarray printing (1)
- Microbial adhesion tests (1)
- Microbial adhesions (1)
- Microbiological Corrosion (1)
- Microcracked ceramics (1)
- Microdroplet (1)
- Microencapsulation (1)
- Microfabrication (1)
- Microfluidics (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Micromagnetism (1)
- Micromanipulation (1)
- Micromechanical model (1)
- Micromechanical modeling (1)
- Micromechanics model (1)
- Microorganism (1)
- Microparticle (1)
- Microplastic analysis (1)
- Microplastic pathways (1)
- Microplastic pollution (1)
- Microplastic stress (1)
- Microplastics reference material (1)
- Microporous polymers (1)
- Microsegregation (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural evolution (1)
- Microstructure Tensile strength (1)
- Microstructure analysis (1)
- Microstructure, γ/γ' misfit (1)
- Microstructure-property relations (1)
- Microstrucure reconstruction (1)
- Microtribology (1)
- Microwave (1)
- Microwave frequency (1)
- Microwaves (1)
- Mid-IR absorption (1)
- Middle Ages (1)
- Middle Pleistocene (1)
- Mikroplasik (1)
- Mikroplastik-Analyse (1)
- Mikroplastik-Analytik (1)
- Mikroplastik-Massengehalte (1)
- Mikrostruktur (1)
- Mikrostrukturierung (1)
- Mild steel (1)
- Mild steels (1)
- Mill scale (1)
- Mineral additions (1)
- Minerals (1)
- Miniaturization (1)
- Minimally-invasive parapatellar approach (1)
- Minimum Waiting Time (1)
- Minimum ignition temperature (1)
- Mining head gear (1)
- Mining tailing (1)
- Mining tailings (1)
- Mis-match (1)
- Misalignment of edges (1)
- Misfit (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Missing fragmentation sites (1)
- Mitigation strategies (1)
- Mixed Ca-K-Na phosphates (1)
- Mixed Inks (1)
- Mixed conductors (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- MoO3 (1)
- MoS2 (1)
- Mobility (1)
- Modal analysis (1)
- Mode-tracing (1)
- Model (1)
- Model and measurement based analysis (1)
- Model calibration (1)
- Model friction tests (1)
- Model of constant adiabatic flame temperatures (CAFT) (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model tuning (1)
- Modell der konstanten Flammentemperaturen (1)
- Modellierung (1)
- Modelling studies (1)
- Modification of structural morphology (1)
- Modified spray arc (1)
- Modul (1)
- Modular Production (1)
- Modulus of elasticity (1)
- Moisture Measurement (1)
- Moisture clog (1)
- Moisture performance (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular beacon (1)
- Molecular diagnostics (1)
- Molecular mass distribution (1)
- Molecular masses (1)
- Molecular recognition (1)
- Molecular-dynamics (1)
- Molecularly Imprinted Polymers (1)
- Molecularly imprinted polymers (1)
- Molten pool (1)
- Molten pool dynamics (1)
- Molten salt (1)
- Molybdenum (1)
- Molybdenum carbide (1)
- Molybdenum disulphide (1)
- Monitoring of damage (1)
- Monoclonal Antibodies (1)
- Monoclonal antibody (1)
- Monolith (1)
- Monotonic and cyclic crack driving force (1)
- Monte Carlo simulation (1)
- Monte Carlo tree search (1)
- Monte-Carlo (1)
- Moon (1)
- Morphogenesis (1)
- Morphology (1)
- Morphology control (1)
- Mouthguard (1)
- Movable cellular automata (1)
- Multi photon lithography (1)
- Multi-core particles (1)
- Multi-energy CT (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-phase (1)
- Multi-physical modeling (1)
- Multi-principal element alloy (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multi-regional inputeoutput data (1)
- Multi-resistant bacteria (1)
- Multi-walled carbon nanotubes (1)
- Multiaxial deformation (1)
- Multicomponent (1)
- Multicomponent diffusion (1)
- Multidimensional Spectroscopy (1)
- Multidisciplinary (1)
- Multifunctional efficiency (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayercoatings (1)
- Multilayers (1)
- Multilaysers (1)
- Multimodal analysis (1)
- Multiphase microstructure (1)
- Multiple crack initiation (1)
- Multiple cracking (1)
- Multiple lines of evidence (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- Multiple reuse (1)
- Multiple-layered scaffold (1)
- Multiplexing immunoassay (1)
- Multiport (1)
- Multivalency (1)
- Multivariate Analysemethoden (1)
- Multivariate analysis methods (1)
- Multivariate data analysis (1)
- Museumsschädling (1)
- Mussel-inspired adhesive systems (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- MySpot (1)
- Mössbauer Spectroscopy (1)
- Müller Polarimetry (1)
- N-Chlorination (1)
- NBR (1)
- NGS (1)
- NIR dyes (1)
- NIR-II Imaging (1)
- NIR-II fluorescence (1)
- NIRII (1)
- NMR probe Development (1)
- NMR-Spektroskopie (1)
- Na and K rhenanites (1)
- NaI (1)
- Nafion 117 (1)
- Nahtgeometrie (1)
- Naica (1)
- Nanaoparticle (1)
- Nano CRM (1)
- Nano particles (1)
- Nano structure (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-composite (1)
- Nano-safety (1)
- Nano-scratch test (1)
- NanoCAM (1)
- NanoSIMS (1)
- Nanoadditive (1)
- Nanobiointerfaces (1)
- Nanocalorimetry (1)
- Nanocarrier (1)
- Nanocasting (1)
- Nanoclays (1)
- Nanocluster (1)
- Nanocomposite fibers (1)
- Nanocorrosion of aluminium and silicon (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanocrystals (1)
- Nanodosimetry (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanofibers (1)
- Nanohybrid (1)
- Nanokomposite (1)
- Nanolayer (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial design (1)
- Nanomaterial legislation (1)
- Nanomaterial regulation (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanomechanics (1)
- Nanomedicine (1)
- Nanometrology (1)
- Nanoparticle characterization (1)
- Nanoparticle synthesis (1)
- Nanopartikel (1)
- Nanophotonics (1)
- Nanophysik (1)
- Nanoplatform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanosafety (1)
- Nanosafety (Safe-by-design) (1)
- Nanoscale EDX analysis (1)
- Nanoscale T-SEM (1)
- Nanoscale multilayers (1)
- Nanoscience (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanosilica (NS) (1)
- Nanosilver (1)
- Nanospheres (1)
- Nanostructure quantification (1)
- Nanostructured FeOx films (1)
- Nanostructured capacitors (1)
- Nanostructured powder (1)
- Nanostructuring (1)
- Nanotribology (1)
- Nanoviscosity (1)
- Nanowear (1)
- Nanowires (1)
- Narrow gap welding (1)
- Nasschemie (1)
- Natural (1)
- Natural convection (1)
- Natural durability (1)
- Natural fibers (1)
- Natural silver wires (1)
- Naturbaustoffe (1)
- Nb12O29 (1)
- Nb2O5 (1)
- Nb2O5, NbO2F, Nb3O7F (1)
- Nb3Sn (1)
- Nd excitation (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Near infrared (1)
- Near-field spectroscopy (1)
- Near-infrared light (1)
- Near-infrared refectography (1)
- Near-infrared refelctography (1)
- Near-surface X-ray diffraction (1)
- Near-threshold regime (1)
- Neel wall (1)
- Neon (1)
- Neozoon (1)
- Networking (1)
- Neuronales Netz (1)
- Neutron Scattering (1)
- Neutron and X-ray diffraction (1)
- Ni (1)
- Ni alloy (1)
- Ni-Co oxide (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- NiMaGa (1)
- NiTi (1)
- Nicht lineare Prozesse (1)
- Nickel alloy (1)
- Nickel chelate (1)
- Nickel foam (1)
- Nickel nanoparticles (1)
- Nickel-/Nickel-Eisen- Magnetostriktion (1)
- Nickel-base alloy (1)
- Nickel-base superalloy (1)
- Nickel-based superalloy (1)
- Nickelbasis (1)
- Nicotinamide (1)
- Nile Red (1)
- Niobcarbid (1)
- Niobcarbid (NbC) (1)
- Niobium (1)
- Niobium alloying (1)
- Niobium oxide (1)
- Nitinol (1)
- Nitrene[2+1]cycloaddition (1)
- Nitride (1)
- Nitrification (1)
- Nitrile rubber (1)
- Nitrobenzene reduction (1)
- Nitrogen (1)
- Nnetwork (1)
- Nobel-metal free electrocatalysis (1)
- Nomenclature (1)
- Non lienear processes (1)
- Non-Destructive Testing (1)
- Non-Destructive testing (1)
- Non-atmospheric conditions (1)
- Non-classical crystallization (1)
- Non-classical crystallization theory (1)
- Non-destructive Materials (1)
- Non-destructive Testing (1)
- Non-destructive ambient analysis (1)
- Non-destructive characterisation (1)
- Non-invasive scientific methods (1)
- Non-propagating cracks (1)
- Non-serrated inhomogeneous flow (1)
- Non-sharp defects (1)
- Non-spherical nanoparticles (1)
- Non-thermally coupled levels (1)
- Non-weldable superalloy (1)
- Nonclassical crystallization (1)
- Noncovalent interactions (1)
- Nondestructive flaw detection (1)
- Nondestructive testing techniques (1)
- Nonferrous slag (1)
- Nonlinear (1)
- Nonlinear behavior (1)
- Nonlinear directional coupler (1)
- Nonlinear optics (1)
- Nonlinear stress-strain curve (1)
- Nonspecific binding (NSB) (1)
- Nosema ceranae (1)
- Notch (1)
- Notch fatigue (1)
- Notch sensitivity (1)
- Notch stress approach (1)
- Notches (1)
- Novel metrology (1)
- Novel optical measurement (1)
- Nuclear Energy and Engineering (1)
- Nuclear Magnetic Resonance (1)
- Nuclear magnetic resonance (1)
- Nuclear reactor systems (1)
- Nucleation tendency (1)
- Number density (1)
- Numeric modelling (1)
- Numerical analysis (1)
- Numerical inversion (1)
- Numerical investigation (1)
- Numerical simulation of welding (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Nydrogen melting (1)
- O-ring (1)
- OBOC library (1)
- OER (1)
- OH (1)
- OMS (1)
- OOMMF (1)
- Oberflächenausführung (1)
- Oberflächentechnik (1)
- Oberflächentexturierung (1)
- Obituary (1)
- Object oriented micromagnetic framework (1)
- Ochratoxin A (1)
- Octachlortrisilane (1)
- Offshore steel grade (1)
- Offshore-Windenergieanlage (1)
- Oil diesel fraction (1)
- Oil lubrication (1)
- Oil-based (1)
- Oligospiroketals (1)
- On-chip screening (1)
- One-bead-one-compound library (1)
- One-pot synthesis (1)
- Online Monitoring (1)
- Online Process Monitoring (1)
- Ontologies (1)
- Open Science (1)
- Open data on zenodo (1)
- Open science (1)
- Open source (1)
- Open-cell foam (1)
- Ophthalmology (1)
- Optical properties of ink (1)
- Optical Tomography (1)
- Optical Wavefield (1)
- Optical analysis (1)
- Optical centrifugation (1)
- Optical criterion of brittleness (1)
- Optical fibers (1)
- Optical measurement (1)
- Optical measurment technique (1)
- Optical microscopy (OM) (1)
- Optical near field (1)
- Optical properties (1)
- Optical temperature sensing (1)
- Optical tomography (1)
- Optical waveguides (1)
- Optically active surfaces (1)
- Optoelektronik (1)
- Oral uptake (1)
- Orchestration (1)
- Order parameter (1)
- Ordered mesoporous carbon (1)
- Ordered mesoporous silica (1)
- Ordering (1)
- Ore provenance (1)
- Organic compounds (1)
- Organic osmolytes (1)
- Organic peroxides (1)
- Organic/inorganic block copolymer (1)
- Organic–inorganic nanostructures (1)
- Organophosphonate (1)
- Orientation (1)
- Orientation description (1)
- Orientation precision (1)
- Orientation relationships (1)
- Oriented immobilization (1)
- Orientierungsverteilung (1)
- Origami (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Osmia bicornis (1)
- Osmium (1)
- Osmolyte (1)
- Osseointegration (1)
- Osteochondral stifle joint defect (1)
- Outdoor weathering (1)
- Ovarian cancer (1)
- Oxidation protection (1)
- Oxide melts (1)
- Oxide-films (1)
- Oxide-induced crack closure (1)
- Oxides (1)
- Oxocobaltates (1)
- Oxyfuel-Verbrennung (1)
- Oxygen Evolution Catalyst (1)
- Oxygen Reduction Reaction (1)
- Oxygen permability (1)
- Oxygen sensitive (1)
- Oxygen-containing functionalities (1)
- PAEKs (1)
- PBF-LB/M (1)
- PBF-LB/M/316L (1)
- PBFLB/M AlSi10Mg alloy (1)
- PC/ABS (1)
- PCA (1)
- PCE (1)
- PCE-Based superplasticizer (1)
- PE-HD Sorption (1)
- PEAK (1)
- PEEK (1)
- PEEK-Komposite (1)
- PEG (1)
- PES (1)
- PET (1)
- PGM-free catalyst (1)
- PH (1)
- PLGA cement (1)
- PMMA (1)
- POSS (1)
- PQQ (1)
- PUR (1)
- PVD hard coating (1)
- PVD-Haftfestigkeit (1)
- PVDF (1)
- PVDF-Based membrane (1)
- Packaging (1)
- Packing density (1)
- Pair distribution function (1)
- Paper sludge combustion ash (1)
- Parabolic flight (1)
- Paramagnetism (1)
- Parameter Study (1)
- Parametric modeling (1)
- Partial penetration welding (1)
- Partial safety factor (1)
- Partially observable Markov decision process (1)
- Particle accretion (1)
- Particle erosion (1)
- Particle scatterin simulations (1)
- Particle size and shape distribution (1)
- Particle size gradation (1)
- Particle synthesis (1)
- Particle transfer (1)
- Passive film (1)
- Passive films (1)
- Passive layer (1)
- Passivity (1)
- Patch (1)
- Path planning (1)
- Pathogen spillover (1)
- Pattern quality (1)
- Pattern simulation (1)
- Pavement concrete (1)
- Pb isotopes (1)
- Pd(II) (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Pelletization (1)
- Penelope model (1)
- Penetration test (1)
- Pentaerythritol (1)
- Pentafluoropyridine (1)
- Pentimenti (1)
- Peptide Library (1)
- Peptide aptamers (1)
- Peptide binder (1)
- Peptide library (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance assessment (1)
- Periodic solidification pattern (1)
- Peritectic reaction (1)
- Permeability tensor (1)
- Permittivity reduction (1)
- Perovskites (1)
- Perturbed-Chain Statistical Association Fluid Theory (1)
- Perzyna viscoplasticity (1)
- Pest control (1)
- Pesticide (1)
- Pflanzenvirus (1)
- Ph (1)
- Phase Diagram (1)
- Phase Equilibria (1)
- Phase contrast-enhanced micro-CT (1)
- Phase development (1)
- Phase diagram (1)
- Phase field crystal (1)
- Phase formation (1)
- Phase grating (1)
- Phase mask (1)
- Phase separation (1)
- Phase shifter (1)
- Phase specific residual stresses (1)
- Phase transformation temperature (1)
- Phase transitions (1)
- Phase-Field Simulations (1)
- Phase-contrast microscopy (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phased array ultrasonic testing (1)
- Phenolic compounds (1)
- Phenothrin (1)
- Phonon interactions (1)
- Phononic crystal (1)
- Phononischer Kristall (1)
- Phosphinate (1)
- Phosphine-ligands (1)
- Phosphinine (1)
- Phosphonate (1)
- Phosphonate esters (1)
- Phosphorous flame retardant (1)
- Phosphorous recovery (1)
- Phosphorus (1)
- Photo physics (1)
- Photoelectrochemistry (1)
- Photoelectron spectroscopy (1)
- Photoligation (1)
- Photoluminescence quantum yield (1)
- Photon Counting Detectors (1)
- Photonic crystal (1)
- Photonic crystal fibre (1)
- Photonic devices (1)
- Photonics (1)
- Photons (1)
- Photophysic (1)
- Photopolymer (1)
- Photoreforming (1)
- Photosensitizer (1)
- Photostability (1)
- Photovoltaic cell encapsulation (1)
- Photovoltaics (1)
- Physical Chemistry (1)
- Physical ageing (1)
- Physical properties (1)
- Physical vapor deposition (PVD) (1)
- Physical vapour deposition (PVD) (1)
- Physics and Astronomy (miscellaneous) (1)
- Phytolith (1)
- Picosecond acoustic (1)
- Piezopolarisation (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Piezoresponse (1)
- Pinholes (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Pipeline design (1)
- Pipeline network (1)
- Pipeline steel of grade X120 (1)
- Piston alloy (1)
- Pitfalls (1)
- Plane crystalization (1)
- Plant virus (1)
- Plasma (1)
- Plasma Polymerization (1)
- Plasma Polymers (1)
- Plasma cutting (1)
- Plasma deposited polymers (1)
- Plasma deposition (1)
- Plasma nanocoatings (1)
- Plasma polymerization (1)
- Plasma polymers (1)
- Plasma processing (1)
- Plasma spray (1)
- Plasma treatments (1)
- Plasma-chemical technique (1)
- Plasma-cut samples (1)
- Plasmid DNA pUC19 (1)
- Plasmon resonance (1)
- Plasmonic absorption (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Plasmonic photocatalysis (1)
- Plasmonics (1)
- Plastic bottles (1)
- Plastic material flow (1)
- Plasticity mechanism (1)
- Plastics (1)
- Plate girders (1)
- Platinum group metals (1)
- Platinum-group-metals (1)
- Platinum-ruthenium colloid (1)
- Plume heating (1)
- Polarimetry (1)
- Polarisation (1)
- Polarization (1)
- Polarization spectroscopy (1)
- Pole figure (1)
- Polishing (1)
- Pollen (1)
- Pollutant (1)
- Pollution (1)
- Poloxazolines (1)
- Poly(L‑lactide) (1)
- Poly(N-vinylpyrrolidone) (1)
- Poly(amino phosphodiester) (1)
- Poly(ether-phosphoramide)s sulfides (1)
- Poly(glycidyl methacrylate) (1)
- Poly(vinyl chloride) (1)
- Poly- (hydroxyethylmethacrylate) (1)
- Polyacrylamide (1)
- Polyacrylic acid (1)
- Polyamide 12 (1)
- Polyamorphism (1)
- Polybutadiene/chloroprene (1)
- Polycarbonate (PC) blends (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polycarboxylate superplasticizer (1)
- Polycarboxylate superplasticizers (PCE) (1)
- Polychlorosilanes (1)
- Polyclonal Antibodies (1)
- Polycrystal (1)
- Polycrystals (1)
- Polyelectrolyte (1)
- Polyelektrolyt (1)
- Polyester fabric strips (1)
- Polyethylene (PE-HD) (1)
- Polyethylene Fibres (1)
- Polyethylene composites (1)
- Polyethylene terephthalate (1)
- Polyethylenterephthalat (1)
- Polyioinic liquid (1)
- Polymer MALDI (1)
- Polymer analysis/characterization (1)
- Polymer based Nanocomposites (1)
- Polymer based nanocomposites (1)
- Polymer blends (1)
- Polymer composite (1)
- Polymer composites (1)
- Polymer degradation (1)
- Polymer electrolyte fuel cell (1)
- Polymer film (1)
- Polymer intrinsischer Mikroporosität (1)
- Polymer matrix (1)
- Polymer matrix composite (1)
- Polymer matrix composites (1)
- Polymer of intrinsic microporosity (1)
- Polymer of intrisic microporosity (1)
- Polymer optical fibre (1)
- Polymer particle (1)
- Polymer particles (1)
- Polymer-based nanocomposites (1)
- Polymer-binding Peptides (1)
- Polymer-ceramic mixtures (1)
- Polymer-matrix composites (PMC) (1)
- Polymer-metal (1)
- Polymeric Materials (1)
- Polymers and Plastics (1)
- Polymers and plastics (1)
- Polymers of Intrinsic Microporosity (1)
- Polymers with intrinsic microporosity (1)
- Polymer–matrix composites (1)
- Polymorph (1)
- Polymorphic transition (1)
- Polynorbornes (1)
- Polyolefins (1)
- Polyoxometalates (1)
- Polyphosphate (1)
- Polyphosphoester (1)
- Polypropylene fiber (1)
- Polystyrene (1)
- Polystyrene microparticles (1)
- Polyurethane acetate vinyl acrylate (1)
- Polyurethanes (1)
- Polyvinyl alcohol (1)
- Polyvinyl alcohol fiber (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Pool dimensions (1)
- Porcelain (1)
- Pore (1)
- Pore orientation (1)
- Pore size (1)
- Pore size distribution (1)
- Pore size tailoring (1)
- Pore solution (1)
- Pore space (1)
- Porosification (1)
- Porosimetry (1)
- Porosity reduction (1)
- Porous carbon (1)
- Porous carbons (1)
- Porous film (1)
- Porous medium (1)
- Porphyrin (1)
- Portland clinker (1)
- Portlandite (1)
- Portrayal of St Joseph (1)
- Position detection (1)
- Position of carboxylate group (1)
- Positron annihilation spectroscopy (1)
- Post-modification by L-cysteine (1)
- Post-welding Imperfections (1)
- Postfluorination (1)
- Postsynthetic modification (1)
- Potassium ions (1)
- Potential drop technique (1)
- Potentiodynamic measurements (1)
- Potentiometry (1)
- Powder (1)
- Powder X-ray diffraction (1)
- Powder analysis (1)
- Powder bed (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder bed fusion (1)
- Powder bed fusion Laser beam (1)
- Powder flow (1)
- Powder metallurgy (1)
- Powder methods (1)
- Powder processing (1)
- Powder rheology (1)
- Powder-based processes (1)
- Power law (1)
- Power law and power-law breakdown (1)
- Power-law breakdown (1)
- Pphosphates (1)
- Pphotophysics (1)
- Ppreheating temperature (1)
- Pre-Columbian ceramics (1)
- Preceramic Polymers (1)
- Preceramic polymers (1)
- Precipitate shape (1)
- Precipitation hardening (1)
- Precipitation hardening aluminum alloys (1)
- Precision polymer sequencing (1)
- Prediction relative (1)
- Preferential orientation (1)
- Preferred orientation (1)
- Preprocessing (1)
- Presolvated electron (1)
- Pressure assisted sintering (1)
- Pressure tanks (1)
- Pressure vessel steels (1)
- Pressure-assisted sintering (1)
- Pressure-dependent solubility (1)
- Prevention (1)
- Preventive strategies (1)
- Priam's treasure (1)
- Prill (1)
- Primer (1)
- Principal stress (1)
- Principal stress components (1)
- Principle component analysis (1)
- Printed Electronics (1)
- Probabilistic assessment (1)
- Probekörpergeometrien (1)
- Probennahme (1)
- Process (1)
- Process Analytical Technology (1)
- Process Metallurgy (1)
- Process Monitoring (1)
- Process analytical technology (1)
- Process chain (1)
- Process control (1)
- Process development (1)
- Process industry (1)
- Process innovations (1)
- Processing window (1)
- Product standard (1)
- Production (1)
- Proficiency testing (1)
- Proinflammatory cytokines (1)
- Projection center (1)
- Projection imaging (1)
- Projective geometry (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proper generalized decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Propolis (1)
- Prostheses (1)
- Protection (1)
- Protection housing (1)
- Protein Purification (1)
- Protein coating (1)
- Protein corona (1)
- Protein structure (1)
- Proteins (1)
- Provenance (1)
- Provenancing (1)
- Proximity-enhanced reaction (1)
- Prozessanalytik (1)
- Prozesskontrolle (1)
- Prozessüberwachung (1)
- Präzision (1)
- Prüfmaschine (1)
- Prüfraster (1)
- Prüfung und Simulation (1)
- Prüfverfahren (1)
- Pseudo peptides (1)
- Pseudo-dynamic loads (1)
- Pseudo-translationalsublattices (1)
- Pseudomonas aeruginosa (1)
- Pseudomonas fluorescens (1)
- Pseudosymmetry (1)
- Pt(II) (1)
- Pufferschichten (1)
- Pull-out (1)
- Pull-out composite materials (1)
- Pull-out tests (1)
- Pullulan (1)
- Pulse Laser (1)
- Pulse electric current sintering (1)
- Pulse shaping (1)
- Pulsed laser ablation (1)
- Pulsed laser beam welding (1)
- Pulsed laser treatment (1)
- Pulsed magnetic field (1)
- Pulsed thermography (1)
- Pultruded fiber rods (1)
- Pump-probe experiments (1)
- Pure aluminium (1)
- Push-out test (1)
- Pyrazinamide (1)
- Pyrethroid (1)
- Pyrolyse (1)
- Pyrotechnik (1)
- QNMR (1)
- QSPR (1)
- QT steel (1)
- QUASES (1)
- Qantum yield (1)
- Qquantification and segmentation (1)
- Qualität (1)
- Quantenausbeute (1)
- Quantitative Analysis (1)
- Quantitative Structure-Property Relationships (1)
- Quantitative bioimaging (1)
- Quantitative damage measurement (1)
- Quantitative surface chemical analysis (1)
- Quantum Dots (1)
- Quantum chemistry (1)
- Quantum do (1)
- Quantum mechanics (1)
- Quantum rod (1)
- Quantum yield standard (1)
- Quartzite mining tailing (1)
- Quasielastic neutron scattering (1)
- Quenching and partitioning (1)
- Quick-XAS (1)
- Quinones (1)
- R&D (1)
- R-curve (1)
- R-curve analysis (1)
- RAMAN (1)
- RBE (1)
- REACH (1)
- RNA (1)
- RSSI (1)
- RSW (1)
- RT (1)
- RXES (1)
- Radar (1)
- Radiation (1)
- Radical Scavenge (1)
- Radical scavenger (1)
- Radio waves (1)
- Radioprotector ectoine (1)
- Radiotherapy (1)
- Railway rails (1)
- Raman Spectroscopy (1)
- Raman microspectroscopy (1)
- Raphael school (1)
- Rapid prototyping (1)
- Rare earth elements separations (1)
- Rate of model oxidation (1)
- Ratiometric (1)
- Ratiometric sensing (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Re-XANES (1)
- Re-entrant surface feature (1)
- Reaction Monitoring (1)
- Reaction Sintering (1)
- Reaction-sintering (1)
- Reaction-to-small-flame (1)
- Reactions (1)
- Reactor conditions (1)
- Ready-to-use (1)
- Real-time deformation (1)
- Real-time infrared spectroscopy (1)
- Real-time operation (1)
- Real-time process monitoring (1)
- Real-time rotation (1)
- Rebar (1)
- Recipes (1)
- Reciprocating sliding (1)
- Reciprocating sliding wear (1)
- Recombinant protein (1)
- Recommendations (1)
- Reconstructed ion chromatograms (1)
- Recovery (1)
- Recyclability (1)
- Recyclable (1)
- Recycled aggregate (1)
- Recycled materials (1)
- Recycled mineral admixture (1)
- Recyclingfähigkeit (1)
- Red phosphorus (1)
- Redox (1)
- Reference (1)
- Reference Method (1)
- Reference measurements (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference product (1)
- Reference standards (1)
- Referenced spectroscopic ellipsometry (RSE) (1)
- Reflection spectroscopy (1)
- Refractive index (1)
- Refractive index engineering (1)
- Refractory (1)
- Refractory alloy (1)
- Refractory alloys (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Reibung (1)
- Reinforced composites (1)
- Reinforced concrete (1)
- Reinforced epoxy composites (1)
- Reinforcement (1)
- Reinforcement Learning (1)
- Reinigung (1)
- Rejuvenation (1)
- Rejuvenator (1)
- Relaxation fatigue (1)
- Renewable Energy (1)
- Renewable copolymers (1)
- Renewable energy (1)
- Repair-welding (1)
- Reparability (1)
- Reparierbarkeit (1)
- Repelling surface coatings (1)
- Representative morphology modeling (1)
- Representative specimens (1)
- Representative volume element (1)
- Reproducible data processing (1)
- Research data management (1)
- Residual lifetime (1)
- Residual powder removal (1)
- Residual strains (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Residual stressMultiphase compositesInteractionMicromechanical schemesAnisotropy (1)
- Resins (1)
- Resistance Spot Welding (RSW) (1)
- Resistance model (1)
- Resistance stress (1)
- Resonance (1)
- Resonance frequency (1)
- Resonanzmessung (1)
- Resource (1)
- Resting time (1)
- Retained Austenite (1)
- Retardation (1)
- Reverse Monte Carlo (1)
- Reverse engineering (1)
- Reverse microemulsion (1)
- Reverse time migration (1)
- Reverse-time migration (1)
- Review (1)
- Reworking (1)
- Rh-Ir alloys (1)
- Rheological (1)
- Rheological properties (1)
- Rheological property (1)
- Rheometer (1)
- Rheometry (1)
- Rhodiumcomplexes (1)
- Rice husk ash (1)
- Rigid (1)
- Ripples (1)
- Risk asessment (1)
- Risk assessment (1)
- Rissanfälligkeit (1)
- Road inspection (1)
- Road pavement (1)
- Robocasting (1)
- Robust nano objects (1)
- Robustness (1)
- Rock-art caves (1)
- Rod structure (1)
- Rohrleitungen (1)
- Roll-to-Roll Processing (1)
- Rolling contact fatigue (1)
- Roman cement (1)
- Room-temperature (1)
- Rope (1)
- Round Robin (1)
- Round robin test (1)
- Rround robin test (1)
- Ru dye sensitizer (1)
- Rubber granules (1)
- Rust (1)
- Ruthenium (1)
- Röntgen-3D-Computertomographie (1)
- Röntgen-Refraktion (1)
- Rückverfolgbarkeit (1)
- S-N probabilistic field (1)
- SA508 (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SBA-16 (1)
- SBR (1)
- SDB (1)
- SDC (1)
- SEM micrography (1)
- SEM–EDS/EBSD (1)
- SERS (1)
- SHCC (1)
- SHPB (1)
- SIF evaluation (1)
- SKPFM (1)
- SLM (1)
- SMAW (1)
- SO2 (1)
- SPH (1)
- SS316L alloy (1)
- SSB (1)
- SSTC Model (1)
- STEM (1)
- STEM-in-SEM (1)
- STEM/TEM imaging (1)
- SWIR photoluminescence (1)
- SWIR thermography (1)
- Sabatier (1)
- Safety characteristics (1)
- Salicylate (1)
- Samarium doped ceria (1)
- Sample changer (1)
- Sample piece size (1)
- Sample pretreatment (1)
- Sample random results (1)
- Sand-lime block (1)
- Saponite (1)
- Saxs (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scaled Boundary Finite Element Method (1)
- Scan strategies (1)
- Scan strategy influence (1)
- Scanning Auger Spectroscopy (1)
- Scanning Kelvin probe (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scanning nano beam electron diffraction (1)
- Scanning probe microscopy (1)
- Scanning transmission electron microscopy (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattering Theory (1)
- Scavenging effect of iron (1)
- Schadstoffemission (1)
- Schadstoffsorption (1)
- Schallerzeuger (1)
- Schichtprüfung (1)
- Schiffsmotorbauteile (1)
- Schlangenbohne (1)
- Schleifen (1)
- Schlickerdeposition (1)
- Schmelze-Masse-Fließrate (1)
- Schneidstoff (1)
- Schneidwaren (1)
- Schutzgas (1)
- SchwarzP cells (1)
- Schwarzpulverähnliches Reinigungspulver (1)
- Schweißeignung (1)
- Schweißnahtausbildung (1)
- Schweißnahtgeometrie (1)
- Schweißsimulation (1)
- Schweißunregelmäßigkeiten (1)
- Schwingstreifen (1)
- Schädigung (1)
- Schädigungsgrad (1)
- Scientific software (1)
- Scientific workflows (1)
- Scratches (1)
- Seal (1)
- Seal failure (1)
- Sealing materials (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Secondary hazard (1)
- Secondary heat source (1)
- Secondary stresses (1)
- Segregation (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selbstreinigende Oberfläche (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser beam melting (1)
- Selective oxidation (1)
- Selektive-laser-melting (1)
- Self-Assembly (1)
- Self-assembled monolayers (SAM) (1)
- Self-assembled structures (1)
- Self-compacting concrete (1)
- Self-degrading (1)
- Self-driving-labs (SDLs) (1)
- Self-lubricating coating (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semi-interpenetrating networks (1)
- Semi-metallic brake-pad material (1)
- Semi-metallic sintered material (1)
- Semiconductive layer (1)
- Sensitisation (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensor Materials (1)
- Separability assumption (1)
- Separate sewer system (1)
- Separation (1)
- Sequence coverage (1)
- Sequence-defined oligomer (1)
- Sequencing (1)
- Sequencing algorithm (1)
- Sequential spectroscopic data (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Serum (1)
- Sets of archaeometric data (1)
- Shape memory alloys (1)
- Shape memory polymer (1)
- Shared infrastruture (1)
- Shark profiles (1)
- Shear (1)
- Shear behavior (1)
- Shear bond test (1)
- Shear exfoliation (1)
- Shear modulus (1)
- Shear strain (1)
- Shear strength (1)
- Shear test (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band structure (1)
- Shear-compression tests (1)
- Sheep animal model (1)
- Sheet resistivity (1)
- Shielding gases (1)
- Ship building (1)
- Shipbuilding steel (1)
- Shock absorbtion (1)
- Shore hardness (1)
- Shore-Härte (1)
- Short glass fiber (1)
- Short range order (1)
- Short-beam strength (1)
- Short-distance diffusion (1)
- Shrinkage (1)
- Shrinkages (1)
- Si network disintegration (1)
- SiGe (1)
- SiO2 (1)
- SiO2 Nanoparticle (1)
- Sicherheitsdatenblatt (1)
- Siderite (1)
- Signal amplification (1)
- Silane (1)
- Silanization (1)
- Silbernanopartikel (1)
- Silica and polystyrene nanoparticles (1)
- Silica coating (1)
- Silica gel modification (1)
- Silica nanoparticles (1)
- Silica nanowires (1)
- Silica support (1)
- Silicate (1)
- Silicate glass (1)
- Silicate glasses (1)
- Silicoborate glasses (1)
- Silicon dioxide (1)
- Silicon release (1)
- Silicone elastomer (1)
- Silicone rubber (SiR) (1)
- Silikatkeramik (1)
- Silk (1)
- Sillver (1)
- Silver diffusion (1)
- Silver indium sulfide (1)
- Silver nitrate (1)
- Simvastatine (1)
- Single asperity (1)
- Single asperity contact (1)
- Single carbon fibers (1)
- Single cell (1)
- Single crystal Ni-Base superalloys (1)
- Single crystal fiber (1)
- Single crystal superalloys (1)
- Single enhancement (1)
- Single molecule (1)
- Single particle ICP-MS (1)
- Single particle spectroscopy (1)
- Single photon and quantum effects (1)
- Single source precursors (1)
- Single-Crystal (1)
- Single-crystal (1)
- Single-dot spectroscopy (1)
- Single-pass welding (1)
- Singulettsauerstoff (1)
- Sinter retardation (1)
- Sinter/sintering (1)
- Sintered Material (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Sisal fiber (1)
- Sixteenth-century painting technique (1)
- Size distribution (1)
- Size effect (1)
- Size exclusion chromatography (1)
- Size measurements (1)
- Slag (1)
- Slicers (1)
- Sliding behaviour (1)
- Sliding wear (1)
- Slip localization (1)
- Slip-rolling (1)
- Slip-rolling resistance (1)
- Slow crack growth (1)
- Slurry (1)
- Slurry optimization (1)
- Small angle neutron scattering (1)
- Small-angle X-ray Scattering (1)
- Small-angle neutron scattering (1)
- Small-scale (1)
- Small-spot XPS (1)
- Smart materials (1)
- Smartphone readout device (1)
- Smectite (1)
- Sn catalysts (1)
- SnO2 (1)
- Soaking time (1)
- Soda lakes (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica (1)
- Soda-lime-silica glass (1)
- Sodium Ion Batteries (1)
- Sodium carbonate minerals (1)
- Sodium ion batteries (1)
- Sodium-metasilicate (1)
- Soft glass (1)
- Soft matter (1)
- Soft-templated (1)
- Softening temperature (1)
- Software UNIFIT 2022 (1)
- Soil incubation study (1)
- Sol-gel coating (1)
- Sol-gel synthesis (1)
- Solar cell (1)
- Solar cells (1)
- Solar concentrator (1)
- Solar energy (1)
- Solarpur (1)
- Solid (1)
- Solid lubricant (1)
- Solid lubrication (1)
- Solid-State-Synthesis (1)
- Solid-binding Peptides (1)
- Solid-phase extraction (SPE) (1)
- Solid-state NMR (1)
- Soliton self-trapping (1)
- Solubilizer (1)
- Solute atoms (1)
- Solution plasma (1)
- Solvation properties (1)
- Solvent replacement (1)
- Solvolyse (1)
- Sonochemical synthesis (1)
- Sorption (1)
- Sorption mechanism (1)
- Soyean oil (1)
- Space (1)
- Space charge polarisation (1)
- Spall (1)
- Spalling (1)
- Spannung-Dehnungs-Beziehung (1)
- Spannungs-Dehnungs-Kurve (1)
- Spannungsrissbeständigkeit (1)
- Spar cap design (1)
- Spatial analyses (1)
- Special issue (1)
- Speciation (1)
- Specific surface (1)
- Specific surface area (1)
- Specimen geometry (1)
- Spectral CT (1)
- Spectral irradiation (1)
- Spectral sensitivity (1)
- Spectroelectrochemistry (1)
- Spectroscopic ellipsomety (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spectrum (1)
- Sphalerite (1)
- Sphingan (1)
- Spin (1)
- Spin-lattice coupling (1)
- Spinodal decomposition (1)
- Spirocyclic (1)
- Split Hopkinson pressure bar (SHPB) (1)
- Split-vacancy defect complexes (1)
- Spontane Polarisation (1)
- Spontaneous emulsification (1)
- Spot welding (1)
- Spot welds (1)
- Spreading (1)
- Sprengarbeiten (1)
- Spring Meeting 2016 (1)
- Sr and Nd isotope analysis (1)
- SrTiO3 (1)
- Stabilising agents (1)
- Stabilization (1)
- Stable crack growth (1)
- Stabstruktur (1)
- Stacking fault energy (1)
- Staircase method (1)
- Stakeholder (1)
- Standard (1)
- Standard test piece (1)
- Standardisierung (1)
- Stapeldruckprüfung (1)
- Static Mixing (1)
- Static load (1)
- Static monitoring (1)
- Stationäre Phase (1)
- Statistical distributions (1)
- Statistical image analysis (1)
- Statistically relevant volumes (1)
- Statistics (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Steady-state creep (1)
- Steady-state weld pool (1)
- Steam (1)
- Steam oxidation resistance (1)
- Steam-cured concrete (1)
- Steel alloy (1)
- Steel and Al (1)
- Steel bar (1)
- Steel billets (1)
- Steel fiber reiniforced concrete (1)
- Steel reinforced concrete (1)
- Steel slag (1)
- Steel-concrete interface (1)
- Stepwise growth (1)
- Stereocomplex (1)
- Stereographic projection (1)
- Stern Geary constant (1)
- Stern-Geary-Konstante (1)
- Stichprobenumfang (1)
- Stimuli-responsive polymers (1)
- Stochastic Landau Lifshitz Gilbert equation (1)
- Stochastic Landau Lifshitz equation (1)
- Stochastic sample functions (1)
- Stoichiometric phases (1)
- Stone Age (1)
- Storage Mechanism (1)
- Stormwater retention tank (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strain fields prediction (1)
- Strain gauge factor (1)
- Strain hardening (1)
- Strain measurement (1)
- Strain rate (1)
- Strain rates (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strain-rate (1)
- Strategic Research Agenda (SRA), (1)
- Strategic alliances (1)
- Strategy and Management (1)
- Stray current (1)
- Streifenlichtprojektion (1)
- Strength mismatch (1)
- Strengthening (1)
- Strengthening mechanisms (1)
- Stress (1)
- Stress Coupling (1)
- Stress analysis (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress concentration tensor (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-relief heat-treatments (1)
- Stress-strain curve (1)
- Stress-strain relation (1)
- Stress-strain relations (1)
- Stress-strain-behavior (1)
- Stress– strain curves (1)
- Stress–strain-relation (1)
- String metal support interaction (1)
- Strontium titanate (1)
- Strontium yttrate (1)
- Structural Analysis (1)
- Structural Health Monitoring (1)
- Structural Materials (1)
- Structural analysis (1)
- Structural anomalies (1)
- Structural build-up (1)
- Structural characterization (1)
- Structural control (1)
- Structural defects (1)
- Structural identification (1)
- Structural inhomogenities (1)
- Structural integrity (1)
- Structural integrity assessment procedure (1)
- Structural phase transition (1)
- Structural precision (1)
- Structural properties (1)
- Structural relaxation (1)
- Structural steel (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure prediction (1)
- Structure propertyrelationship (1)
- Structure solution (1)
- Structure-mechanical property correlation (1)
- Structure-property relationship (1)
- Structured cantilever (1)
- Structures (1)
- Structures under extreme conditions (1)
- Structure–property correlation (1)
- Styrene butadiene rubber (1)
- Sub-4nm particles (1)
- Sub-aerial biofilms (SAB) (1)
- Sub-oxide (1)
- Sub-size test piece (1)
- Subcritical crack growth (1)
- Subgroup (1)
- Substitute model (1)
- Substitution (1)
- Sulfate resistant cement (SRC) (1)
- Sulfated materials (1)
- Sulfates (1)
- Sulfiding (1)
- Sulfobetaines (1)
- Sulfur containing polymers (1)
- Sulphate-chloride attack (1)
- Sulphuric acid (1)
- Super martensitic filler material (1)
- Superalloy single crystals (1)
- Superconducting (1)
- Superconductor (1)
- Supercritical CO2 (1)
- Superimposed loading (1)
- Superior sorbent (1)
- Supermartensitic steel (1)
- Superparamagnetic nanoparticles (1)
- Superparamagnetism (1)
- Superplasticity (1)
- Superplasticizers (1)
- Supersaturation (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Support configurations (1)
- Supra molecular polymerization (1)
- Supramolecular chemistry (1)
- Supramolecules (1)
- Surface Activation (1)
- Surface Analysis Working Group (1)
- Surface Chemistry (1)
- Surface Integrity (1)
- Surface Species (1)
- Surface area (1)
- Surface charge (1)
- Surface chemical analysis (1)
- Surface chemisttry (1)
- Surface cracks (1)
- Surface crystallization (1)
- Surface defects (1)
- Surface elasticity (1)
- Surface energy (1)
- Surface group analysis (1)
- Surface group quantification (1)
- Surface interactions (1)
- Surface ligand (1)
- Surface morphology (1)
- Surface nucleation (1)
- Surface plasmon (1)
- Surface plasmon polariton (1)
- Surface plasmon polaritons (1)
- Surface preparation (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface roughness analysis (1)
- Surface stress (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface temperature (1)
- Surface tension (1)
- Surface texture (1)
- Surface topography (1)
- Surface treatment (1)
- Surface treatments (1)
- Surface wetting (1)
- Surface-induced Melting (1)
- Surface-initated grafting (1)
- Surfaces, coatings and films (1)
- Surfactants (1)
- Survey (1)
- Survival rates (1)
- Sustainability (1)
- Sustainability and the Environment (1)
- Sustainability assessment (1)
- Sustainable Synthesis (1)
- Sustainable binders (1)
- Sustainable building materials (1)
- Sustainable cement (1)
- Sustainable chemisry (1)
- Sustainable concrete (1)
- Sustainable construction (1)
- Suzuki-Miyaura coupling (1)
- Swarming (1)
- Swell-capture (1)
- Swelling (1)
- Swept wavelength interferometry (1)
- Symbiosis (1)
- Symmetric dwell periods (1)
- Symmetry groups (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron X-ray CT (1)
- Synchrotron X-ray diffraction (SXRD) (1)
- Synchrotron X-ray refraction (1)
- Synchrotron X‐ray refraction radiography (1)
- Synchrotron computed tomography (1)
- Synchrotron diffraction (1)
- Synchrotron imaging (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synchrotron x-ray refraction radiography (SXRR) (1)
- Synchrotron, BAMline (1)
- Syntheseis (1)
- Synthetic aperture focusing technique (SAFT) (1)
- Synthetic peptides (1)
- System method (1)
- T-SEM (1)
- T1 precipitate (1)
- TEKKEN (1)
- TENSTAND WP4 Final Report (1)
- TENSTAND WP4 Report (1)
- TGA-FTIR (1)
- TGA-MS (1)
- THz time-domain spectroscopy (THz-TDS) (1)
- TIG (1)
- TMF (1)
- TPA (1)
- TPMS structures (1)
- TRBS (1)
- TRC (1)
- TRGS (1)
- TRIP - transformation induced plasticity (1)
- TRIP Steel (1)
- TRIS (1)
- TRL (1)
- TTS (1)
- TWIP Steel (1)
- TXRF (1)
- TXRF-XANES (1)
- TXRF-XAS (1)
- TaC (1)
- Tafel Plot (1)
- Tag (1)
- Talbot-Lau interferometer (1)
- Talbot-Lau interferometry (1)
- Tandem gas metal arc welding (1)
- Tandem welding (1)
- Tank leaching test (1)
- Tannins (1)
- Tantalum carbide (1)
- Target plate material (1)
- Tauchen (1)
- Tausalz (1)
- Teaching (1)
- Technical Ceramics (1)
- Technical crack detection (1)
- Technical lignin (1)
- Technikrecht (1)
- Technische Regeln (1)
- Temeprature scaling (1)
- Temerature (1)
- Temper (1)
- Temperature and humidity (1)
- Temperature dependence (1)
- Temperature dependency (1)
- Temperature effects (1)
- Temperature modulated differential scanning calorimetry (1)
- Temperature sensitivity (1)
- Temple Scroll (1)
- Tensile Test Ontology (1)
- Tensile behavior (1)
- Tensile deformation (1)
- Tensile load (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Tensile testing procedure (1)
- Termiten (1)
- Termites (1)
- Ternary zinc alloys (1)
- Terpolymer (1)
- Test methods (1)
- Test setup (1)
- Test standard (1)
- Testing (1)
- Testing method (1)
- Testing methodologies (1)
- Testing parameters (1)
- Testing procedure (1)
- Tetraethyl orthosilicate (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Textile binder (1)
- Textilschädling (1)
- The charge transfer and ionization process (CTI) (1)
- Theranostics (1)
- Therapeutic Antibodies (1)
- Therapy (1)
- Thermal Cycling (1)
- Thermal annealing (1)
- Thermal barrier coatings (1)
- Thermal conductivity device (1)
- Thermal coupling energy level (1)
- Thermal cycling (1)
- Thermal desorption analysis (1)
- Thermal desorption mass spectrometry (1)
- Thermal desorption spectrometry (TDS) (1)
- Thermal diffusivity (1)
- Thermal emission (1)
- Thermal extraction-desorption gas chromatography mass spectrometry (1)
- Thermal history (1)
- Thermal percolation threshold (1)
- Thermal shock stress (1)
- Thermal softening (1)
- Thermal stability (1)
- Thermal transient problem (1)
- Thermal transport (1)
- Thermal-Expansion (1)
- Thermal-desorption spectroscopy (1)
- Thermal-fluid-structure coupling model (1)
- Thermally coupled levels (1)
- Thermally induced porosity (TIP) (1)
- Thermally-induced moisture transport (1)
- Thermische Analyse (1)
- Thermische Diffusivität (1)
- Thermischer Ausdehnungkoeffizient (1)
- Thermo physical simulation (1)
- Thermo-desorption (1)
- Thermo-fluid dynamics (1)
- Thermo-fluid flow (1)
- Thermo-mechanical fatigue (1)
- Thermo-responsive polymers (1)
- Thermoanalytik (1)
- Thermoanalytische Verfahren (1)
- Thermobimetal (1)
- Thermocouple (1)
- Thermodynamic modelling (1)
- Thermoelectric (1)
- Thermografie (1)
- Thermogravimetric analysis (TGA) (1)
- Thermogravimetrie (1)
- Thermomagnetic generator (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermoplastic polyurethane (TPU) (1)
- Thermoplastic prepreg (1)
- Thermoresponsive polymer (1)
- Thermoresponsive polymers (1)
- Thermoresponsive polymres (1)
- Thermoset composition (1)
- Thick films (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick shells (1)
- Thick steel plates (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Thick-walled Structures (1)
- Thickening (1)
- Thickness (1)
- Thin film contact layer (1)
- Thin film metrology (1)
- Thin film systems (1)
- Thin magnetic films (1)
- Thin mesoporous films (1)
- Thin polymeric films (1)
- Thin steel plates (1)
- Thin tribofilm (1)
- Thioimidazolium (1)
- Thiol (1)
- Thiol-ene click chemistry (1)
- Thiols (1)
- Third body (1)
- Thixotropy (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional crystallization (1)
- Three-dimensional printing (1)
- Three-dimensional tomographies (1)
- Thrombosis (1)
- Throwing-stick (1)
- Thumor therapy (1)
- Ti-based colloids (1)
- Ti6Al4V alloy (1)
- Ti6Al4V alloys (1)
- TiC (1)
- TiMgN (1)
- TiN (1)
- TiO2 films (1)
- TiO2 nanoparticles (1)
- Tiatanium (1)
- Time-gated emission (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Time-resolved scattering (1)
- Tin(II)octanoate (1)
- Tire wear (1)
- Titan-Halterung (1)
- Titanaluminid (1)
- Titania (1)
- Titania nanoparticles (1)
- Titanite (1)
- Titanium aluminides (1)
- Titanium carbide (1)
- Titanium nitride (1)
- Titanium nitride films (1)
- Tnsile testing (1)
- Tobermorite (1)
- Tomography (1)
- Tool (1)
- Tool service life (1)
- Tool-workpiece interaction (1)
- Tooth wear (1)
- Top-down (1)
- TopasMC (1)
- Topographic analysis (1)
- Topographie (1)
- Topography (1)
- Topotactic phase transitions (1)
- Torsional in situ fatigue testing (1)
- Total scattering (1)
- Total transmittance reflectance (1)
- Trabecular structures (1)
- Traceable nanoparticle size measurements; (1)
- Transfer film (1)
- Transfer layer (1)
- Transformation (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transformation pathways (1)
- Transformer (1)
- Transient heat transfer (1)
- Transition electron microscopy (1)
- Transition metal (1)
- Transition temperature (1)
- Transition-metal doped (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microscope (TEM) (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transparency (1)
- Transparent ceramic (1)
- Transparent conductive oxides (1)
- Transpassive dissolution (1)
- Transport limitations (1)
- Transport processes (1)
- Transport properties (1)
- Trapping (1)
- Treated wood (1)
- Trennung (1)
- Triazine (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribo-film (1)
- Tribochemistry (1)
- Tribofilm model system (1)
- Tribological properties (1)
- Tribologie (1)
- Tribooxidation (1)
- Tricalcium Phosphate (1)
- Triggered (1)
- Trilobite compound eyes (1)
- Triobology (1)
- Triplet test (1)
- Triply Periodical Minimal Surface (1)
- Triply periodic minimal surfaces (1)
- Trojan silver artefacts (1)
- Tubular X-joints (1)
- Tubular joints (1)
- Tunable antenna (1)
- Tungsten (1)
- Tungsten carbide (WC) (1)
- Tungsten-Rhenium (1)
- Turbine (1)
- Turbine blade (1)
- Turbine components (1)
- Turbine disk (1)
- Turning (1)
- Twin orientation relationship (1)
- Twin-screw extrusion (TSE) (1)
- Two-dimensional chromatography (2D-LC) (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Two-dimensional solidification (1)
- Two-photon adsorption (1)
- Two-photon-polymerization (1)
- Two-run welding technique (1)
- Type-I pyrethroids (1)
- UCST polymers (1)
- UCST-type copolymer (1)
- UCST-type polymer (1)
- UL 94 (1)
- UN Test O.2 (1)
- UPLC (1)
- UV Vis (1)
- UV degradation (1)
- UV-VIS (1)
- UV-blocker addition (1)
- UV-irradiation (1)
- UV/VIS spectroscopy (1)
- UV/Vis and emission spectroscopy (1)
- Ultra high molecular weight (1)
- Ultra high molecular weight polyethylene (1)
- Ultra-Hochleistungsbeton (1)
- Ultra-high performance concrete (UHPC) (1)
- Ultra-high strength steel (1)
- Ultra-short pulse laser processing (1)
- Ultrafast all-optical switching (1)
- Ultrafast laser excitation (1)
- Ultrafast microscopy (1)
- Ultrafast optical techniques (1)
- Ultrafast optoacoustic (1)
- Ultrafast soliton fission (1)
- Ultrahigh-performance concrete (UHPC) (1)
- Ultrahochleistungsbeton (1)
- Ultraschallmessung (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Ultrasonic (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic assited machining (1)
- Ultrasonic measurement (1)
- Ultrasonic velocities (1)
- Ultrasonic velocity (1)
- Ultrasonic vibration (1)
- Ultrasonics (1)
- Ultrasound gel (1)
- Umlaufkühler (1)
- Umweltsimulation (1)
- Uncertainties (1)
- Uncertainty (1)
- Uniaxial compression tests (1)
- Unidirectional composites (1)
- Universal calibration (1)
- Unterpulverschweißen (1)
- Up-cycling (1)
- Upconversion luminescence (1)
- Upconverstion (1)
- Upconverting nanoparticles (1)
- Utilization, and storage (CCUS) technology (1)
- V-notch impact toughness (1)
- VHCF (1)
- VMAAS (1)
- VOC emission (1)
- VOx catalyst (1)
- VRFB (1)
- VVOCs (1)
- Van der Waals forces (1)
- Vanadium speciation (1)
- Vapor recondensation (1)
- Vapor-phase hydrofluorination (1)
- Varestraint test (1)
- Variable excitation (1)
- Variable temperature (1)
- Vasari (1)
- Ventile (1)
- Verarbeitung (1)
- Vererbung (1)
- Vergleichuntersuchung (1)
- Verkehrslasten (1)
- Verschleiß (1)
- Vertebral (1)
- Vertebroplasty (1)
- Verzug (1)
- Vibration (1)
- Vickers hardness (1)
- Vigna unguiculata (1)
- Vinyl fluoride (1)
- Vinyl monomer (1)
- Virucidality (1)
- Viscoelastic model (1)
- Viscoplastic (1)
- Viscoplasticity (1)
- Viscosity modifying agents (1)
- Visibility (1)
- Viskosität (1)
- Visual ontology development (1)
- Vitrimer (1)
- Vivianite (1)
- Vocabulary providers (1)
- Void defect formation mechanism (1)
- Void nucleation & growth (1)
- Volatile organic compound (1)
- Volatile organic compounds (1)
- Volatiles from thermosets (1)
- Volcano plot (1)
- Volume changes (1)
- Volume fraction (1)
- Volumenbruchteil (1)
- Volumetric properties (1)
- Vorlagerungszeit (1)
- Vulcanisation system (1)
- Vulcanization (1)
- WAAM Ti-6Al-4V (1)
- WRC 1992 diagram (1)
- Washing machine (1)
- Wasseraufbereitung (1)
- Wasserhaltige Gläser (1)
- Waste heat conversion (1)
- Waste management (1)
- Water Diffusion (1)
- Water analysis (1)
- Water atmosphere (1)
- Water dispersibility (1)
- Water droplet erosion resistance (1)
- Water electrolysis (1)
- Water filtration (1)
- Water in glass (1)
- Water management (1)
- Water migration (1)
- Water oxydation catalysis (1)
- Water stability (1)
- Water structure (1)
- Water treatment (1)
- Water uptake (1)
- Water-based (1)
- Water-bearing glasses (1)
- Water/alcohol mixtures (1)
- Wear mechanism (1)
- Wear mechanisms (1)
- Wear particle analysis (1)
- Wear particles (1)
- Wear rate (1)
- Weathering tests (1)
- Weibull statistics (1)
- Weld end crater (1)
- Weld fatigue (1)
- Weld filler (1)
- Weld geometry (1)
- Weld imperfections (1)
- Weld metal cracking (1)
- Weld pool behavior (1)
- Weld pool modeling (1)
- Weld pool support (1)
- Weld root (1)
- Weld seam geometry (1)
- Weld toes (1)
- Welded Joints (1)
- Welded Plate Girders (1)
- Welded joint (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Welding residual stress (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffauswahl (1)
- Werkstoffdatenbank (1)
- Werkstofffragen (1)
- Werkstoffranking (1)
- Werkzeug (1)
- Wet chemical etching (1)
- White light interferometry (1)
- White light interferometry microscopy (1)
- White-rot fungi (1)
- Whole-chain CCS scenario (1)
- Wide-range (1)
- Widerstandspressschweißen (1)
- Wild bees (1)
- Wind energy (1)
- Wind rotor blade (1)
- Windkraftanlagen (1)
- Wineglass shape (1)
- Wire are additive manufacturing (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wood Modification (1)
- Wood Protection (1)
- Work hardening (1)
- Work of adhesion (1)
- Workability (1)
- Workflow (1)
- Working mechanism (1)
- X-Ray Refraction (1)
- X-Ray flourescence spectroscopy (1)
- X-Ray refraction (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Diffraction (1)
- X-ray Fluorescence (1)
- X-ray Photoelectron Spectroscopy (XPS) (1)
- X-ray absorption fine structure (1)
- X-ray absorption near edge structure (XANES) (1)
- X-ray absorption tomography (1)
- X-ray analysis (1)
- X-ray and Neutron Diffraction (1)
- X-ray and electron diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- X-ray computer tomography (1)
- X-ray crystal analysis (1)
- X-ray diffraction (XRD) (1)
- X-ray diffraction analysis (1)
- X-ray diffractometry (XRD) (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray fluorescence spectroscopy (1)
- X-ray fuorescence (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray microscopy (1)
- X-ray microspectroscopy (1)
- X-ray phase contrast (1)
- X-ray photoelectron (1)
- X-ray powder diffraction (1)
- X-ray production efficiency (1)
- X-ray reefraction (1)
- X-ray refraction radiography (1)
- X-ray spectroscopy (1)
- X-ray spectrum (1)
- X-ray synchrotron tomography (1)
- X-ray tomographic (1)
- X-ray tomography (1)
- X-ray-CT (1)
- X-ray-diffraction (1)
- XPCS (1)
- XPS spctroscopy (1)
- XRF (1)
- XRF ink analysis (1)
- Xerogel (1)
- Xpoxy resin (1)
- YAG lasers (1)
- Yb(III) (1)
- Year in Review (1)
- Yellowness index (1)
- Yield strength (1)
- Yield stress (1)
- Young`s modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- Yttrium silicates (1)
- ZCF (1)
- Zeolite (1)
- Zeolites (1)
- Zeolithe (1)
- Zeolitic Imidazolate Frameworks (1)
- Zero wear (1)
- Zeta potential (1)
- Ziele (1)
- Zinc catalyst (1)
- Zinc coated steel (1)
- Zinc ferrite (1)
- Zinc(II) complexes (1)
- Zinkbeschichtung (1)
- Zinkdeckschichten (1)
- Zirconia-toughened alumina (1)
- Zn-Fe-Zr nanoparticles (1)
- ZnMgAl-alloy coatings (1)
- ZnO (1)
- ZnO films (1)
- ZnO nanorods Nanocrystalline (1)
- ZnSe (1)
- Znc (1)
- Zonation (1)
- Zonierung (1)
- Zr(iV) compounds (1)
- Zugeigenschaften (1)
- Zyklische Belastung (1)
- Zündenergie (1)
- Zündquellen (1)
- [MMIM]+[DMP]− (1)
- a-C:H (1)
- abasic side (1)
- active pharmaceutical ingredient (1)
- adsorption (1)
- ambient vibration tests (1)
- amorphous carbon film (1)
- amorphous silica film (1)
- analysis (1)
- analytical service (1)
- anion-exchange (1)
- anodic dissolution (1)
- antibody (1)
- arbidic austempered ductile iron (1)
- atomic imaging (1)
- bacteria (1)
- bacteria detection (1)
- base loss (1)
- bended arrow of time (1)
- beta particle (1)
- bioactive (1)
- biodegradation (1)
- biodiesel (1)
- biofuels (1)
- biokompatibel (1)
- biomaterials (1)
- biomineralization (1)
- bismuth (1)
- blended cements (1)
- bone (1)
- calcium carbonate (1)
- calibration (1)
- carbamate (1)
- carbon black (1)
- carrier system (1)
- cascade reaction (1)
- catalysis (1)
- clustered nanoparticles (1)
- composite materials (1)
- composites (1)
- conferences (1)
- contact resonance (1)
- contour method (1)
- corrosion (1)
- cryogenic steel (1)
- crystal structure (1)
- cyclic shear-compression tests (1)
- degradation (1)
- digital image correlation (1)
- dipolar polarization (1)
- dispersion-corrected density-functional theory (1)
- dry friction (1)
- dsDNA (1)
- dual phase steel (1)
- dye (1)
- dynamic characterisation (1)
- editorial (1)
- electron backscattering (1)
- electron diffraction (1)
- electron microscopy (1)
- enatioselective (1)
- end-of-life phase (1)
- explosives (1)
- finite element modelling (1)
- flow cytometry (1)
- fluorescence microscopy (1)
- fluorescent reporter (1)
- friction (1)
- gamma ray (1)
- gesintert (1)
- glass-like carbon (1)
- gold (1)
- graphene oxide (1)
- hardness (1)
- high entropy alloys (1)
- high pressure (1)
- hochfeste Stähle (1)
- holography (1)
- hot-embossing (1)
- hybrid nanocomposite (1)
- hydrate (1)
- immunoseparation (1)
- impact sensitivity (1)
- in-plane loads (1)
- in-situ synthesis (1)
- infrared Thermography (1)
- infrared spectroscopy (1)
- laponite (1)
- lifetime (1)
- liquids material characterization (1)
- local effects (1)
- lossy materials (1)
- low energy electrons (1)
- low temperature co-fired ceramics (1)
- machining (1)
- magnesium (1)
- magnetic nanoparticle (1)
- martensitisch (1)
- masonry (1)
- masonry towers (1)
- mechanical nonlinearity (1)
- mechanische Nichtlinearitäten (1)
- metal matrix composite (1)
- method (1)
- microstructural changes (1)
- microstructure (1)
- microwave synthesis (1)
- milling (1)
- molecular dynamics (1)
- multilayer graphene (1)
- multiphase composite (1)
- nanoclay (1)
- nanocomposites (1)
- nanocrystals (1)
- nanoparticles (1)
- nanostructure (1)
- negative crystal growth (1)
- nichtrostender Stahl (1)
- niobium carbide (1)
- nucleation (1)
- optimale Überdeckungshöhe (1)
- organic dye (1)
- organic dyes (1)
- organocatalysis (1)
- oxidation (1)
- oxidative stress (1)
- pH probe (1)
- pL-droplets (1)
- particle (1)
- particle scattering (1)
- passive films (1)
- permittivity (1)
- phosphate glasses (1)
- photocatalysis (1)
- photoemission (1)
- photoluminescence (1)
- photoluminescence quantum yield (1)
- photophysics (1)
- photovoltaics (1)
- plasmon lifetime (1)
- plasticity (1)
- plasticization (1)
- poly (2-hydroxyethyl methacrylate) (PHEMA) (1)
- polyethylene (1)
- polymer additives (1)
- polymorphism (1)
- powder diffraction (1)
- pressure-assisted sintering (1)
- proton conductors (1)
- pseudo-dynamic tests (1)
- pure aluminum (1)
- pyrazinamide (1)
- quality assurance (1)
- quality control (1)
- quantum dot (1)
- quantum yield (1)
- radiolysis (1)
- rammed earth (1)
- recycled material (1)
- residual stress analysis (1)
- ring-expansion polymerization (1)
- rubber (1)
- scanning electron microscopy (1)
- screening (1)
- screening tes (1)
- seismic assessment (1)
- sensitivity analysis (1)
- shear behaviour (1)
- sliding simulation (1)
- slip-rolling (1)
- solar cell (1)
- sorption (1)
- space charge polarization (1)
- square amide (1)
- standardization (1)
- strength (1)
- subgrain (1)
- subgrain structure (1)
- sulfidation (1)
- surface plasmon polaritons (1)
- sustainability (1)
- temeprature dependent exchange length (1)
- tensile strength (1)
- thermal methods (1)
- thermophysical properties (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
- topographic effect (1)
- trade fair (1)
- transmission mode (1)
- tribological performance (1)
- vacuum (1)
- vibration (1)
- water speciation (1)
- welding residual stresses (1)
- x-ray diffraction (1)
- µ-CT (1)
- µ-gravity (1)
- µCT (1)
- Ägyptisches Museum Berlin (1)
- Äquivalente Spannungskonzentrationsfaktoren (1)
- Ökodesign (1)
- Ökonomische und ökologische Vorteile (1)
- Überlebenswahrscheinlichkeit (1)
- Δμ XANES (1)
- α-1,4- and α-1,6-glucans (1)
- β-eucryptite (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- ГИДРОДИНАМИКА (1)
- КОНВЕКЦИЯ (1)
- ЛАЗЕРНАЯ СВАРКА (1)
- МЕТОД КОНЕЧНЫХ ЭЛЕМЕНТОВ (1)
- СВАРОЧНАЯ ВАННА (1)
- ТЕМПЕРАТУРНОЕ ПОЛЕ (1)
- ТЕПЛОПРОВОДНОСТЬ (1)
- ЧИСЛЕННОЕ МОДЕЛИРОВАНИЕ (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- кратер шва (1)
- кристаллизация, (1)
- монокристалл (1)
- плавление, (1)
- рентгеноструктурный анализ (1)
- сварочная ванна (1)
- температурное поле (1)
- функция теплонасыщения (1)
Organisationseinheit der BAM
- 6 Materialchemie (621)
- 9 Komponentensicherheit (386)
- 5 Werkstofftechnik (343)
- 6.3 Strukturanalytik (250)
- 8 Zerstörungsfreie Prüfung (214)
- 1 Analytische Chemie; Referenzmaterialien (189)
- 7 Bauwerkssicherheit (180)
- 9.3 Schweißtechnische Fertigungsverfahren (167)
- 8.5 Röntgenbildgebung (146)
- 5.1 Mikrostruktur Design und Degradation (128)
Paper des Monats
- ja (31)
The corrosion behavior of galvanized steels and zinc components under atmospheric exposure depends mostly on the corrosion product‐based cover layer formation under the prevailing conditions. The use of agar‐based gel electrolytes makes it possible to use electrochemical methods to obtain a characteristic value from these cover layers that describe their current and future protective capacity. It is shown here that different states of galvanized steel can be distinguished very well under laboratory conditions and that this method is also suitable for use under practical conditions. Based on the characteristic values and assuming future time of wetness, it is very easy to draw up a forecast for the future corrosion rate, which provides plausible values.
Esta pesquisa avaliou o fenômeno de autocicatrização nas propriedades mecânicas e absorção capilar de concretos estruturais. Foram avaliados dois aditivos cristalizantes em pó, dosados de acordo com o teor recomendado pelos fabricantes. Aditivos cristalizantes aumentam a densidade do gel C-S-H e formam cristais insolúveis, bloqueando fissuras. Três traços de concreto foram produzidos: referência, aditivo-X com 0,8% e aditivo-Y com 2,0% em relação a massa do cimento. Aplicou-se 75% da carga de ruptura aos 3- e 14-dias para gerar microfissuras e comparar com a referência. Posteriormente, a autocicatrização foi avaliada aos 28- e 76-dias. A propriedade de resistência à compressão axial foi determinada aos 28-dias, revelando que os aditivos cristalizantes contribuíram para um aumento médio de 12% desta propriedade. A idade do carregamento dos concretos não apresentou um impacto significativo na resistência à compressão axial, mas apontou resultados significativos entre os tipos de aditivos estudados, conforme ANOVA. As propriedades de absorção de água por capilaridade foram avaliadas aos 28- e 76-dias, indicando uma redução de absorção de água média de 42% devido ao uso dos aditivos cristalizantes. Em conclusão, a incorporação dos aditivos cristalizantes contribuiu de maneira positiva para a autocicatrização dos concretos estudados, indicando uma recuperação parcial das microfissuras.
This contribution reports the development of a polymerizable BODIPY-type fluorescent probe targeting small-molecule carboxylates for incorporation into molecularly imprinted polymers (MIPs). The design of the probe crosslinker includes a urea recognition site p-conjugated to the 3-position of the BODIPY core and two methacrylate moieties. Titration experiments with a carboxylate-expressing antibiotic, levofloxacin (LEVO), showed a blue shift of the absorption band as well as a broadening and decrease in emission, attributed to hydrogen bonding between the probe’s urea group and the carboxylate group of the antibiotic. Using this probe crosslinker, core–shell particles with a silica core and a thin MIP shell were prepared for the detection of LEVO. The MIP exhibited highly selective recognition of LEVO, with an imprinting factor of 18.1 compared to the non-imprinted polymer. Transmission electron microscopy confirmed the core–shell structure and spectroscopic studies revealed that the receptor’s positioning leads to a unique perturbation of the polymethinic character of the BODIPY chromophore, entailing the favourable responses. These features are fully preserved in the MIP, whereas no such response was observed for competitors such as ampicillin. The sensory particles allowed to detect LEVO down to submicromolar concentrations in dioxane. We have developed here for the first time a BODIPY probe for organic carboxylates and incorporated it into polymers using the imprinting technique, paving the way for BODIPY-type fluorescent MIP sensors.
Automated Wall Thickness Evaluation for Turbine Blades Using Robot-Guided Ultrasonic Array Imaging
(2024)
Nondestructive testing has become an essential part of the maintenance of modern gas turbine blades and vanes since it provides an increase in both safety against critical failure and efficiency of operation. Targeted repairs of the blade’s airfoil require localized wall thickness information. This information, however, is hard to obtain by nondestructive testing due to the complex shapes of surfaces, cavities, and material characteristics. To address this problem, we introduce an automated nondestructive testing system that scans the part using an immersed ultrasonic array probe guided by a robot arm. For imaging, we adopt a two-step, surface-adaptive Total Focusing Method (TFM) approach.
For each test position, the TFM allows us to identify the outer surface, followed by calculating an adaptive image of the interior of the part, where the inner surface’s position and shape are obtained. To handle the large volumes of data, the surface features are automatically extracted from the TFM images using specialized image processing algorithms. Subsequently, the collection of 2D extracted surface data is merged and smoothed in 3D space to form the outer and inner surfaces, facilitating wall thickness evaluation. With this approach, representative zones on two gas turbine vanes were tested, and the reconstructed wall thickness values were evaluated via comparison with reference data from an optical scan. For the test zones on two turbine vanes, average errors ranging from 0.05 mm to 0.1 mm were identified, with a standard deviation of 0.06–0.16 mm.
AbstractSorbents are promising materials for applications in atmospheric water harvesting, thermal energy storage, and passive cooling, thereby addressing central challenges related to water scarcity and the global energy transition. Recently, hygroscopic hydrogel composites have emerged as high‐performance sorbents. However, many of these systems are fabricated with unsustainable and costly sorbent materials, which hinders their wide deployment. Here, the synthesis of high‐performance, cost‐efficient polyacrylamide hydrogels loaded with unprecedented amounts of calcium chloride is demonstrated. To this end, the swelling procedure of polyacrylamide hydrogels in aqueous calcium chloride solutions is optimized. The achievable salt loading in the hydrogel is characterized as a function of temperature, calcium chloride concentration in the swelling solution, and the hydrogel preparation conditions. The obtained hydrogel‐salt composites are shown to be stable under repeated sorption‐desorption cycling and enable water uptakes of 0.92 and 2.38 grams of water per gram of dry materials at 30% and 70% relative humidity, respectively. The resulting cost‐performance ratio substantially exceeds lithium chloride‐based systems. Further, the mechanistic insights on hydrogel salt interactions can guide the design of sustainable and low‐cost sorbent materials for future applications in water and energy.
The present work demonstrates a sustainable approach of using relatively coarser iron ore particles for ironmaking. The motivation is to reduce the energy consumption in the milling of the iron ore by utilizing coarser iron ore particles (+0.05 mm) and to select a suitable binder for improving pellet properties. Iron ore fines in the range of 0.05–0.25 mm was selected and classified into three size ranges. Fluxed iron ore pellets were prepared using lime as a binder for the basicity of 0, 1, and 2. Reduction of these pellets with a packed bed of coal fines was performed in the temperature range of 900–1200 °C for a duration of 30–120 min. The direct reduction kinetics of the iron ore pellets were studied by employing diffusion and chemical reaction control models to the experimental data. The results show that pellets made with coarser iron ore particles have improved reduction behavior and kinetics. The reduction reaction is found to be a mixed control. The activation energy for the reduction reaction varies from 44.3 to 74.76 kJ mol−1 as iron ore particle size decreases from 0.25 to 0.05 mm and basicity increases from 0 to 2.
Processing and cytocompatibility of Cu-doped and undoped fluoride-containing bioactive glasses
(2024)
Sintered or additive-manufactured bioactive glass (BG) scaffolds are highly interesting for bone replacement applications. However, crystallization often limits the high-temperature processability of bioactive glasses (BGs). Thus, the BG composition must combine high bioactivity and processability. In this study, three BGs with nominal molar (%) compositions 54.6SiO2-1.7P2O3-22.1CaO-6.0Na2O-7.9K2O-7.7MgO (13–93), 44.8SiO2-2.5P2O3-36.5CaO-6.6Na2O-6.6K2O-3.0CaF2 (F3) and 44.8SiO2-2.5P2O3-35.5CaO-6.6Na2O-6.6K2O-3.0CaF2-1.0CuO (F3–Cu) were investigated. The dissolution and ion release kinetics were investigated on milled glass powder and crystallized particles (500–600 μm). All glasses showed the precipitation of hydroxyapatite (HAp) crystals after 7 days of immersion in simulated body fluid. No significant differences in ion release from glass and crystalline samples were detected. The influence of surface roughness on cytocompatibility and growth of preosteoblast cells (MC3T3-E1) was investigated on sintered and polished BG pellets. Results showed that sintered BG pellets were cytocompatible, and cells were seen to be well attached and spread on the surface after 5 days of incubation. The results showed an inverse relation of cell viability with the surface roughness of pellets, and cells were seen to attach and spread along the direction of scratches.
Glycolide was polymerized in bulk by means of four different ROPPOC catalysts: tin(II) 2-ethylhexanoate (SnOct2), dibutyltin bis(pentafluoro-phenoxide) (BuSnOPF),zinc biscaproate (ZnCap), and zinc bis(pentafluoro-phenyl sulfide) (ZnSPF). The temperature was varied between 110 and 180°C and the time between 3 h and 7 days. For the few polyglycolides (PGAs) that were soluble extremely high molecular masses were obtained. The MALDI TOF mass spectra had all a low signal-to-noise ration and displayed the peaks of cyclic PGAs with a“saw-tooth pattern ”indicating formation of extended-ring crystallites in the mass range below m/z 2500. The shape of DSC curves varied considerably with catalyst and reaction conditions, whereas the long-distance values measured by SAXS were small and varied little with the polymeriza-tion conditions.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Thermal transient problems, essential for modeling applications like welding and additive metal manufacturing, are characterized by a dynamic evolution of temperature. Accurately simulating these phenomena is often computationally expensive, thus limiting their applications, for example for model parameter estimation or online process control. Model order reduction, a solution to preserve the accuracy while reducing the computation time, is explored. This article addresses challenges in developing reduced order models using the proper generalized decomposition (PGD) for transient thermal problems with a specific treatment of the moving heat source within the reduced model. Factors affecting accuracy, convergence, and computational cost, such as discretization methods (finite element and finite difference), a dimensionless formulation, the size of the heat source, and the inclusion of material parameters as additional PGD variables are examined across progressively complex examples. The results demonstrate the influence of these factors on the PGD model’s performance and emphasize the importance of their consideration when implementing such models. For thermal example, it is demonstrated that a PGD model with a finite difference discretization in time, a dimensionless representation, a mapping for a moving heat source, and a spatial domain non-separation yields the best approximation to the full order model.
The output of C&D waste is increasing year by year, among which low-quality recycled brick aggregates (RBAs) have not been well utilized and brought environmental burden. The durability of steam-cured concrete (HCC) is often compromised due to the detrimental effects of this curing regime on the long-term performance and microstructure development of the concrete material. To address this issue, this study investigates the potential of incorporating RBAs to improve the long-term durability of HCC. The results demonstrate that the incorporation of a small amount of RBA (10–20%) not only enhances the 28-d strength of HCC by 2.5–11.3%, but also improves its impermeability by mitigating heat damage effects. The combined application of fine and coarse RBA was found to effectively balance the negative effects of coarse RBA on the performance of HCC. Furthermore, the utilization of RBA in HCC was shown to have economic and environmental benefits. The results of this study demonstrate a simple and effective approach to improve the long-term durability of HCC while promoting the high-value utilization of solid waste.
A corrosion study is performed on six variations of titanium grade 5 (Ti6Al4V) samples. Samples are prepared in different conditions by variation of preanodization, postanodization, and picosecond-laser (ps-laser) surface treatment, while polished and anodized samples serve as reference. Microcones and nanosized periodic surface features are successfully produced on Ti6Al4V samples. The morphology and topography of the structures are visualized by scanning electron microscopy and white light interference microscopy. Furthermore, the relative electrochemically active surface area (ECSA) is determined for the ps-laser-treated samples. It is determined that the preanodized and laser-treated sample has 3.5 times larger ECSA than a polished sample, and that the laser-treated sample has 4.1 times larger area. Moreover, Tafel analysis is performed to determine the corrosion properties of the samples. It is shown that the corrosion resistance improves for both laser-structured samples after the anodization. To further study the surface of the samples, electrochemical impedance spectroscopy measurements are conducted. The study indicates that the ps-laser-treated and anodized Ti6Al4V is suitable to be used for the fabrication of bone screws and plates due to its improved corrosion resistance as compared to nonanodized samples.
Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current “gold standard” enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions. A common concept to aim for detection limits comparable to those of enzymatic amplification reactions is the usage of polymer nanoparticles (NP) stained with a large number of chromophores. We explored different simple NP-based signal amplification strategies for heterogeneous sandwich immunoassays
that rely on an extraction-triggered release step of different types of optically detectable reporters. Therefore, streptavidinfunctionalized polystyrene particles (PSP) are utilized as carriers for (i) the fluorescent dye coumarin 153 (C153) and (ii) hemin (hem) molecules catalyzing the luminol reaction enabling chemiluminescence (CL) detection. Additionally, (iii) NP labeling with hemin-based microperoxidase MP11 was assessed. For each amplification approach, the PSP was first systematically optimized regarding size, loading concentration, and surface chemistry. Then, for an immunoassay for the inflammation marker C- eactive protein (CRP), the analyte sensitivity achievable with optimized PSP
ystems was compared with the established ELISA concept for photometric and CL detection. Careful optimization led to a limit of detection (LOD) of 0.1 ng/mL for MP11-labeled PSP and CL detection, performing similarly well to a photometric ELISA (0.13 ng/mL), which demonstrates the huge potential of our novel assay concept.
The 2023 Nobel Prize in Chemistry was awarded to Aleksey I. Ekimov (prize share 1/3), Louis E. Brus (prize share 1/3), and Moungi G. Bawendi (prize share 1/3) for groundbreaking inventions in the field of nanotechnology, i.e., for the discovery and synthesis of semiconductor nanocrystals, also termed quantum dots, that exhibit size-dependent physicochemical properties enabled by quantum size effects. This feature article summarizes the main milestones of the discoveries and developments of quantum dots that paved the road to their versatile applications in solid-state lighting, display technology, energy conversion, medical diagnostics, bioimaging, and image-guided surgery.
In situ chemical analysis of duplex stainless steel weld by laser induced breakdown spectroscopy
(2024)
The high corrosion resistance and good mechanical properties of duplex stainless steel (DSS) are due to its special chemical composition, which is a balanced phase ratio of ferrite (α) and austenite (γ). Many industrial applications require the integration of DSS components. For this, Gas tungsten arc welding (GTAW) is an excellent choice, as it allows an automated operation with high reproducibility. However, when the weld pool solidifies, critical ratios of α- and γ- phases can occur, which lead to solidification cracking, increased susceptibility to corrosion, and a decrease in ductility and critical strength. Previous studies have shown that these defects can be caused by the accumulation of manganese and chromium in the heat affected zone (HAZ), requiring ongoing monitoring of this accumulation. A suitable method for such monitoring is laser-induced breakdown spectroscopy (LIBS), which can be used in two operating modes: calibration using standard reference samples and calibration-free. Unlike conventional quantitative LIBS measurements, which require reference samples to generate a calibration curve, calibration-free LIBS (CF-LIBS) allows chemical compositions to be determined solely from the emission spectrum of the plasma. Numerous publications show that CF-LIBS is a fast and efficient analytical method for the quantitative analysis of metal samples. In this work, CF-LIBS is applied to spectra obtained during GTAW DSS welding and the result is compared with those obtained by PLS analysis. A good correlation was found between both types of analysis, demonstrating the suitability of the CF-LIBS method for this application. The CF-LIBS method has a significant advantage over conventional LIBS due to the rapid in situ measurement of concentrations of major alloying elements without calibration procedure. This, combined with fast feedback and appropriate adjustment of welding parameters, helps prevent welding defects.
Determination of short carbon fiber orientation in zirconium diboride ceramic matrix composites
(2024)
In fiber-reinforced components, the fiber alignment and orientation have paramount influence on the thermomechanical properties of the resulting composite, for both short and continuous fiber. Here we present the case of an ultra-refractory matrix intended for extreme environment applications, ZrB2, reinforced with 20 vol% and 50 vol% short carbon fibers. In both cases, fibers tend to align perpendicular to the uniaxial pressure applied during shaping and sintering of a pellet, although the fiber tilt across the pellet thickness is difficult to determine. Moreover, for high volume fractions of reinforcement, the spatial distribution of the fibers is heterogeneous and tends to have domains of preferential orientations. We compare the information on the fiber distribution as collected by scanning electron microscopy images, X-ray computed tomography and synchrotron X-ray refraction radiography (SXRR). The three techniques prove to be complementary. Importantly, we demonstrate that SXRR yields the most statistically significant information due to the largest field of view, yet with a sensitivity down to the nanometer, and that can be successfully applied also to heavy matrix materials, such as zirconium boride.
Transparent conductive oxides such as indium tin oxide (ITO) are standards for thin film electrodes, providing a synergy of high optical transparency and electrical conductivity. In an electrolytic environment, the determination of an inert electrochemical potential window is crucial to maintain a stable material performance during device operation. We introduce operando ellipsometry, combining cyclic voltammetry (CV) with spectroscopic ellipsometry, as a versatile tool to monitor the evolution of both complete optical (i.e., complex refractive index) and electrical properties under wet electrochemical operational conditions. In particular, we trace the degradation of ITO electrodes caused by electrochemical reduction in a pH-neutral, water-based electrolyte environment during electrochemical cycling. With the onset of hydrogen evolution at negative bias voltages, indium and tin are irreversibly reduced to the metallic state, causing an advancing darkening, i.e., a gradual loss of transparency, with every CV cycle, while the conductivity is mostly conserved over multiple CV cycles. Post-operando analysis reveals the reductive (loss of oxygen) formation of metallic nanodroplets on the surface. The reductive disruption of the ITO electrode happens at the solid–liquid interface and proceeds gradually from the surface to the bottom of the layer, which is evidenced by cross-sectional transmission electron microscopy imaging and complemented by energy-dispersive X-ray spectroscopy mapping. As long as a continuous part of the ITO layer remains at the bottom, the conductivity is largely retained, allowing repeated CV cycling. We consider operando ellipsometry a sensitive and nondestructive tool to monitor early stage material and property changes, either by tracing failure points, controlling intentional processes, or for sensing purposes, making it suitable for various research fields involving solid–liquid interfaces and electrochemical activity.
AbstractIn this study, we compare the residual stress state in a laser powder bed fusion (PBF‐LB/M) AlSi10Mg alloy in the as‐built (AB) condition with that after two different heat treatments (265 °C for 1 h, HT1; and 300 °C for 2 h, HT2). The bulk residual stress (RS) is determined using synchrotron X‐ray diffraction (SXRD), and near‐surface profiles are determined using laboratory energy‐dispersive X‐ray diffraction (EDXRD). The EDXRD results do not reveal any notable difference between the conditions at a depth of 350 μm, suggesting that the machining process yields a comparable residual stress state in the near‐surface regions. On the other hand, the SXRD results show that HT1 is more effective in relieving the bulk RS. It is observed that HT1 reduces the RS state in both the aluminium matrix and the silicon network. In addtion, HT2 does not have a significant impact on relaxing the RS as‐built state of the matrix, although it does induce a reduction in the RS magnitudes of the Si phase. It is concluded that the heat treatment stress relieving is effective as long as the Si‐network is not disaggregated.
Powder Bed Fusion – Laser Beam (PBF-LB) of high γ’ strengthened Ni-base superalloys, such as CM247LC, is of great interest for high temperature applications in gas turbines. However, PBF-LB of CM247LC is challenging due to the high cracking susceptibility during PBF-LB processing (solidification cracking) and heat treatment (strain age cracking, mostly caused by residual stresses). This study focuses on understanding the impact of process parameters on microstructure, residual stresses and solidification cracking. Laser power (P), speed (v) and hatch spacing (h) were varied while the layer thickness (t) was fixed. The melt pool size and shape were found to be key factors in minimizing solidification cracking. Narrower and shallower melt pools, achieved using a low line energy density (LED = P/v ≤ 0.1 J/mm), gave low crack densities (0.7 mm/mm2). A tight hatch spacing (h = 0.03 mm) resulted in reduced lack of fusion porosity. Electron backscatter diffraction investigations revealed that parameters giving finer microstructure with 〈100〉crystallographic texture had low crack densities provided they were processed with a low LED. Atom probe tomography elucidated early stages of spinodal decomposition in the as-built condition, where Cr and Al cluster separately. The extent of spinodal decomposition was found to be affected by the LED and the hatch spacing. Samples with low LED and small hatch spacing showed higher degrees of spinodal decomposition. X-ray diffraction residual stress investigations revealed that the residual stress is proportional to the volumetric energy density (VED = P/(v. h. t)). Although low residual stresses can be achieved by using low VED, there is a high risk of lack of fusion. Hence, other parameters such as modified scan strategy, build plate pre-heating and pulsed laser mode, must be further explored to minimize the residual stresses to reduce the strain age cracking susceptibility.
The frequency-domain (FD) method provides an alternative to the commonly used time-domain (TD) approach in characterizing the luminescence kinetics of luminophores, with its own strengths, e.g., the capability to decouple multiple lifetime components with higher reliability and accuracy. While extensively explored for characterizing luminophores with down-shifted emission, this method has not been investigated for studying nonlinear luminescent materials such as lanthanide-doped upconversion nanoparticles (UCNPs), featuring more complicated kinetics. In this work, employing a simplified rate-equation model representing a standard two-photon energy-transfer upconversion process, we thoroughly analyzed the response of the luminescence of UCNPs in the FD method. We found that the FD method can potentially obtain from a single experiment the effective decay rates of three critical energy states of the sensitizer/activator ions involved in the upconversion process. The validity of the FD method is demonstrated by experimental data, agreeing reasonably well with the results obtained by TD methods.
AbstractMicroplastics (MP) can be detected in all environmental systems. Marine and terrestrial aquatic systems, especially the transported suspended solids, have often been the focus of scientific investigations in the past. Sediments of aquatic river systems, on the other hand, were often ignored due to the time‐consuming sample preparation and analysis procedures. Spectroscopic measurement methods counting particle numbers are hardly suitable as detection methods, because there are plenty of natural particles next to a small number of MP particles. Integral methods, such as thermoanalytical methods are determining the particle mass independently of the inorganic components.In this study, a workflow for sample preparation via density separation and subsequent analysis by thermal extraction desorption‐gas chromatography/mass spectrometry is presented, which leads to representative and homogeneous samples and allows fast and robust MP mass content measurements suitable for routine analysis. Polymers were identified and quantified in all samples. Polyethylene and styrene‐butadiene rubber are the dominant polymers, besides polypropylene and polystyrene. Overall, total polymer masses between 1.18 and 337.0 µg/g could be determined. Highest MP concentrations in riverbed sediment are found in sites characterized by low flow velocities in harbors and reservoirs, while MP concentrations in sandy/gravelly bed sediments with higher flow velocities are small.
Antibacterial photodynamic therapy (a‐PDT) has emerged as a promising non‐invasive therapeutic modality that utilizes the combination of a photosensitive agent, molecular oxygen, and excitation light to generate reactive oxygen species (ROS), demonstrating remarkable activity against multidrug‐resistant bacterial infections. However, the effective use of conventional photosensitizers is significantly limited by a number of their shortcomings, namely, poor water solubility and low selectivity. Herein, we present a novel biocompatible water‐soluble nanocomposite based on hydrophobic tetraphenylporphyrin (TPP) molecules and hydrophilic ternary AgInS2/ZnS quantum dots incorporated into a chitosan matrix as an improved photosensitizer for a‐PDT. We demonstrated that TPP molecules could be successfully transferred into chitosan solution while remaining primarily in the form of monomers, which are capable of singlet oxygen generation. We performed a detailed analysis of the Förster resonance energy transfer (FRET) between quantum dots and TPP molecules within the nanocomposite and proposed the mechanism of the singlet oxygen efficiency enhancement via FRET.
The plastic value chain, central part of modern living, caused environmental pollution and bioaccumulation of plastic nanoparticles (PNPs). Their ubiquitous presence in different environmental and biological compartments has become a serious threat to human health and ecosystems. Frequently used plastic materials such as polypropylene (PP), polystyrene (PS) and polyethylene (PE) have been detected in the form of PNPs in the food chain, soil, water and air, as well as in human feces and blood. In this study, we aimed to provide novel insights in endocrine disrupting properties of PNPs using in vitro estrogen receptor (ER) transactivation assay. The effects of PP-NPs, PE-NPs and PS-NPs and their mixture on T47D-KBluc cell line stably transfected with luciferase as reporter enzyme was evaluated by means of cytotoxicity, cellular uptake and ER activation. Tested dose range for PNPs was 0.001 – 10 mg/L. Both cellular uptake and cytotoxicity for all PNPs was found to be dose-dependent. Only the highest dose of PP-NPs and PE-NPs induced apoptosis and cell death, while PS-NPs were not cytotoxic in tested dose range. For tested concentrations, PP-NPs and PE-NPs showed significant agonistic activity on ER, while PS-NPs cannot be considered ER active. When, applied as mixture, PNP demonstrated additive toxicity effects compared to the effect of each individual PNPs. Additivity was also observed for ER agonistic effect of PNPs mixture according to the benchmark dose-addition modelling approach. This study provides missing science-based evidence on endocrine disrupting effects of PE-NPs, PP-NPs, PS-NPs and their mixtures and highlights the importance of considering unintentional, aggregate and combined exposure to different PNPs in risk management.
The development of hydrogen technologies entails high safety requirements in distribution and dispensing infrastructure. Therefore, it is necessary to pursue research on material compatibility in hydrogen, especially for critical parts with tribological issues.
The focus of this study is to evaluate the influence of hydrogen on a wider range of commercially available polymer materials. Thereby, the friction and wear behavior of different grades of TPE, POM, PA66, PA12, PPA, PEEK, PPS, PTFE, PAI, PI and PBI were investigated against a rotating steel disk (AISI 304). Filled and unfilled polymers from different suppliers were evaluated at room temperature in air, vacuum and hydrogen gas (H2) as well as in liquid hydrogen at - 253°C (LH2).
The sliding behavior of the polymer materials is discussed by means of surface analyses, whereby special attention is paid to the formation of a transfer film.
According to the results at ambient temperature, the effect of hydrogen environment on the tribological behavior of neat polymers may be related to lack of moisture, but also to saturated hydrocarbons in gaseous hydrogen. In liquid hydrogen, the best tribological performances were achieved with neat PA polymers as well as PPS and PI composites.
Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers
(2024)
This study presents the influence of high-pressure hydrogen environment on the physical and mechanical properties of two types of cross-linked hydrogenated acrylonitrile butadiene rubbers. Based on the CSA/ANSI standard, static exposures in hydrogen experiments were performed up to 100 MPa at 120 °C. Characterization before and after exposure was conducted by means of density and hardness measurements, dynamic mechanical analysis (DMA), tensile tests, compression set, FT-IR and AFM analyses to assess effects after decompression. While the effect of high-pressure exposure is significant immediately after exposure, most of the physical and mechanical properties recover after 48 hours. FT-IR, AFM, SEM and compression set results indicate, however, permanent effects.
Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1 M NaCl, pH 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV-Vis) spectroscopy to elucidate metal dissolution processes. In-situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
Corrosion behaviour of AlCrFe2Ni2Mox (x = 0.0, 0.1, 0.15, 0.3 and 0.6) high-entropy alloys was investigated in a 0.1 M H2SO4 solution. Passive films formed upon anodic polarisation, built of Al-based inner layer and (Cr, Fe, Mo)-based outer layer, had good protective properties. In particular, they prevented corrosion of the (Al, Ni)-rich BCC-B2 phase, which was observed under open-circuit conditions. Moderate amounts of Mo, up to x = 0.3, positively affected the passivation ability of AlCrFe2Ni2. Significant changes in microstructure and phase composition of the alloy at higher Mo concentrations (x = 0.6) resulted in deterioration of its corrosion resistance.
A fundamental study of physical mechanisms of wineglass-shaped fusion zone profile in laser melting
(2024)
The fusion zone geometry in laser melting processes e.g., laser welding and laser-based additive manufacturing, of metallic materials has commonly a wineglass-shaped profile which is critical to the grain orientation and stress distribution. Hereby, we adopt for the first time a decoupling work through a combination of multi-physics modelling and experiments to reveal the fundamental mechanisms of this special morphology. Two physicsbased easy-to-use metal vapour models are proposed to consider the vapour’s momentum and thermal effects separately. It is found that the direct laser energy absorption and Marangoni shear stress which are widely hypothesised to dominate the wineglass-shape formation show only a minor influence. The additional heating from the metallic vapour plume rather than its momentum impact contributes predominantly to the enlarging of the molten pool top region, resulting directly in the formation of the wineglass-shaped fusion zone. The generality of the plume heating effect is also validated in two types of materials (steel and Al) in a wide range of parameters.
The Na salt of chloroacetic acid is condensed in suspension. Furthermore,glycolic acid is condensed in bulk or in concentrated solution by means of SnCl2 or 4-toluene sulfonic acid (TSA) as catalysts. The temperatures are varied from 160 to 200°C and the time from 1 to 5 days. Low molar mass cyclic poly(glycolic acid) (PGA) is detected by means of matrix-assisted laser desorption ionization time-of-flight (MALDI TOF) mass spectrometry in most PGAs. A predominance of certain cycles having an even number of repeat units is observed suggesting a thermodynamically favored formation of extended-ring crystals. Extremely high melting temperatures (up to 237.5°C)and high melting enthalpies are found for polycondensations with TSA in 1,2-dichlorobenzene.
Two-dimensional covalent organic frameworks (COFs) based on phosphinine and thiophene building blocks have been synthesized with two different side groups. The materials are denoted as CPSF-MeO and CPSF-EtO where CxxF correspond to the covalent framework, whereas P and S are related to heteroatoms phosphorous and sulfur. MeO and EtO indicate the substituents, i.e. methoxy and ethoxy.
Their morphologies were studied by scanning electron microcopy and X-ray scattering. The absence of crystalline reflexes in the X-ray pattern reveal that both materials are amorphous and can be considered as glasses. Furthermore, N2 adsorption measurements indicate substantial Brunauer–Emmett–Teller (BET) surface area values pointing to the formation of three-dimensional pores by stacking of the aromatic 2D layer. An analysis of the porosity of both COFs showed a mean radius of the pores to be of ca. 4 nm, consistent with their chemical structure. The COFs form nanoparticles with a radius of around 100 nm. The thermal behavior of the COFs was further investigated by fast scanning calorimetry. These investigations showed that both COFs undergo a glass transition. The glass transition temperature of CPSF-EtO is found to be ca. 100 K higher than that for CPSF-MeO. This large difference in the glass transition is discussed to be due to a change in the interaction of the COF sheets induced by the longer ethoxy group. It might be assumed that for CPSF-EtO more individual COF sheets assemble to larger stacks than for CPSF-MeO. This agrees with the much larger surface area value found for CPSF-EtO compared to CPSF-MeO. To corroborate the results obtained be fast scanning calorimetry dielectric measurements were conducted which confirm the occurrence of a dynamic glass transition. The estimated temperature dependence of the relaxation rates of the dielectric relaxation and their absolute values agrees well with the data obtained by fast scanning calorimetry. Considering the fragility approach to the glass transition, it was further found that CPSF-MeO is a fragile glass former whereas CPSF-EtO behaves as a strong glass forming material. This difference in the fragility points also to distinct differences in the interaction between the 2D COF molecules in both materials.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
It is proposed to model the experimentally observed weld pool boundary with superellipses (Lamé curves) and to find the unknown parameters of the curves using optimization methods. It has been shown experimentally that during laser welding of austenitic stainless steel with a thickness of 2 mm at a speed of 20 mm/s, the rear weld pool part has a shape close to triangular which can be accurately approximated by a superellipse. Analytical dependences of the trajectory and growth rate of the crystal and its cross-sectional area on the geometry of the rear weld pool part are obtained.
A method of solving the thermo-fluid dynamics problem is presented, enabling the prediction of the shape and dimensions of the weld pool during keyhole laser welding of thick plates. It is shown that the rear weld pool boundary can be satisfactorily approximated by a set of superellipses (Lamé curves). The presence of a convex rear weld pool boundary in the mid-plane has been observed experimentally and reproduced numerically. It was shown that in this zone the concentration of liquating impurities increases and the local solidification temperature decreases, contributing to the susceptibility to hot cracking.
Thermoelectric generators are very attractive devices for waste heat energy harvesting as they transform a temperature difference into electrical power. However, commercially available generators show poor power density and limited operation temperatures. Research focuses on high‐temperature materials and innovative generator designs. Finding the optimal design for a given material system is challenging. Here, a theoretical framework is provided that allows appropriate generator design selection based on the particular material properties. For high‐temperature thermoelectric oxides, it can be clearly deduced that unileg multilayer generators have the highest potential for effective energy harvesting. Based on these considerations, prototype unileg multilayer generators from the currently best thermoelectric oxide Ca3Co4O9 are manufactured for the first time by industrially established ceramic multilayer technology. These generators exhibit a power density of 2.2 mW/cm² at a temperature difference of 260 K, matching simulated values and confirming the suitability of the technology. Further design improvements increase the power density by a factor of 22 to facilitate practicable power output at temperature differences as low as 7 K. This work demonstrates that reasonable energy harvesting at elevated temperatures is possible with oxide materials and appropriate multilayer design.
The development of new fluorescent organic probes effective in the NIR-II region is currently a fast-growing field and represents a challenge in the domain of medical imaging. In this study, we have designed and synthesized an innovative series of aza-boron dipyrromethenes emitting in the NIR-II region. We have investigated the effect of different water-solubilizing groups not only on the photophysical properties of the compounds but also on their in vitro and in vivo performance after bioconjugation to the antibody trastuzumab. Remarkably, we discovered that the most lipophilic compound unexpectedly displayed the most favorable in vivo properties after bioconjugation. This underlines the profound influence that the fluorophore functionalization approach can have on the efficiency of the resulting imaging agent.
The emission of ultrafine particles from small desktop Fused Filament Fabrication (FFF) 3D printers has been frequently investigated in the past years. However, the vast majority of FFF emission and exposure studies have not considered the possible occurrence of particles below the typical detection limit of Condensation Particle Counters and could have systematically underestimated the total particle emission as well as the related exposure risks. Therefore, we comparatively measured particle number concentrations and size distributions of sub-4 nm particles with two commercially available diethylene glycol-based instruments – the TSI 3757 Nano Enhancer and the Airmodus A10 Particle Size Magnifier. Both instruments were evaluated for their suitability of measuring FFF-3D printing emissions in the sub-4 nm size range while operated as a particle counter or as a particle size spectrometer. For particle counting, both instruments match best when the Airmodus system was adjusted to a cut-off of 1.5 nm. For size spectroscopy, both instruments show limitations due to either the fast dynamics or rather low levels of particle emissions from FFF-3D printing in this range. The effects are discussed in detail in this article. The findings could be used to implement sub-4 nm particle measurement in future emission or exposure studies, but also for the development of standard test protocols for FFF-3D printing emissions.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
The LOBSTER (Deringer et al., 2011;Maintz et al., 2013 ,2016 ;Nelson et al., 2020 ) software aids in extracting quantum-chemical bonding information from materials by projecting the plane-wave based wave functions from density functional theory (DFT) onto an atomic orbital basis. LobsterEnv, a module implemented in pymatgen (Ong et al., 2013) by some of the authors of this package, facilitates the use of quantum-chemical bonding information obtained from LOBSTER calculations to identify neighbors and coordination environments. LobsterPy is a Python package that offers a set of convenient tools to further analyze and summarize the LobsterEnv outputs in the form of JSONs that are easy to interpret and process. These tools enable the estimation of (anti) bonding contributions, generation of textual descriptions, and visualization of LOBSTER computation results. Since its first release, both LobsterPy and LobsterEnv capabilities have been extended significantly. Unlike earlier versions, which could only automatically analyze Crystal Orbital Hamilton Populations (COHPs) (Dronskowski & Blöchl, 1993), both can now also analyze Crystal Orbital Overlap Populations (COOP) (Hughbanks & Hoffmann, 1983) and Crystal Orbital Bond Index (COBI) (Müller et al., 2021). Extracting the information about the most important orbitals contributing to the bonds is optional, and users can enable it as needed. Additionally, bonding-based features for machinelearning (ML) studies can be engineered via the sub-packages “featurize” and “structuregraphs”. Alongside its Python interface, it also provides an easy-to-use command line interface (CLI) that runs automatic analysis of the computations and generates a summary of results and publication-ready figures. LobsterPy has been used to produce the results in Ngo et al. (2023), Chen et al. (2024), Naik et al. (2023), and it is also part of Atomate2 (2023) bonding analysis workflow for generating bonding analysis data in a format compatible with the Materials Project (Jain et al., 2013) API.
Multiple principal element alloys encompass the well-known high entropy alloys (HEA). The alloy system represents a new class of materials consisting of at least three alloying elements, each containing 5 to 35 at.%. Thus, this alloying concept differs fundamentally from conventional materials such as steel or nickel alloys. For this purpose, the alloying elements are specifically selected, the microstructures are adjusted in a single-phase and, in some cases, multi-phase manner. In particular, conflicting goals, such as the trade-off between strength and ductility in conventional steels, are overcome. However, in the last 20 years, the focus has been on material synthesis. With the increase in available material quantities, the focus is now on processing issues such as joining and welding processes. The weldability of HEAs has received very little attention so far. The experience with dissimilar metal welds is completely lacking but is essential for the application of these materials in combination with conventional materials. The present study presents comprehensive experimental results on the weldability of an equimolar CoCrFeMnNi-HEA in cold-rolled and heat-treated condition, which was joined by tungsten inert gas welding to an austenitic steel AISI 304. The mechanical properties of the dissimilar metal welds were characterized by cross-weld tensile samples, whereas the local deformation in the weld of the different welding zones was measured by digital image correlation. In accordance with the respective initial HEA condition (cold-rolled vs. heat-treated), the local strain behavior was divergent and influenced the global mechanical properties of both DMW types. Nonetheless, the experiments provided proof in principle of the weldability for dissimilar joints of the CoCrFeMnNi-HEA welded to conventional materials like austenitic stainless steels ensuring a corresponding capability for mechanical loading. This allows further considerations on the application of these innovative materials.
Irradiation assisted stress corrosion cracking (IASCC) is a form of intergranular stress corrosion cracking that occurs in irradiated austenitic alloys. It requires an irradiated microstructure along with high temperature water and stress. The process is ubiquitous in that it occurs in a wide range of austenitic alloys and water chemistries, but only when the alloy is irradiated. Despite evidence of this degradation mode that dates back to the 1960s, the mechanism by which it occurs has remained elusive. Here, using high resolution electron backscattering detection to analyze local stress-strain states, high resolution transmission electron microscopy to identify grain boundary phases at crack tips, and decoupling the roles of stress and grain boundary oxidation, we are able to unfold the complexities of the phenomenon to reveal the mechanism by which IASCC occurs. The significance of the findings impacts the mechanical integrity of core components of both current and advanced nuclear reactor designs worldwide.
In the past two decades, numerous relaxation or physical aging experiments of metallic glasses have revealed signatures of intermittent atomic-scale processes. Revealed via intensity cross-correlations from coherent scattering using X-ray photon correlation spectroscopy (XPCS), the observed abrupt changes in the time-domain of atomic motion does not fit the picture of gradual slowing down of relaxation times and their origin continues to remain unclear. Using a binary Lennard-Jones model glass subjected to microsecond-long isotherms, we show here that temporally and spatially heterogeneous atomic-cluster activity at different length-scales drive the emergence of highly non-monotonous intensity cross-correlations. The simulated XPCS experiments reveal a variety of time-dependent intensity-cross correlations that, depending on both the structural evolution and the 𝑞-space sampling, give detailed insights into the possible structural origins of intermittent aging measured with XPCS.
Crystalline materials that exhibit reversible mechanical responses upon exposure to external stimuli have garnered significant attention owing to their potential applications in various fields. Herein, we report a crystal of (2Z,2′Z)-2,2′-(1,4-phenylene)bis(3-(4-bromophenyl)acrylonitrile) (DSBr), which displays simultaneous elasto-plastic behaviour and reversible thermosalient effects. While elasto-plastic behaviour is attributed to underlying packing features, reversible thermosalient expansion is attributed to uniaxial expansion mediated by heat. Exceptional length increase and contraction upon cooling is due to the restorative nature of weak interactions through a cooperative effect. The cooperative movement of molecules is reflected in the unidirectional expansion of the habit plane. Thermosalient reversible expansion–contraction in elasto-plastic crystals have not been discussed in the literature so far. Detailed analysis reported herein provides a comprehensive understanding of the underlying mechanism of flexibility and thermosalient responses. This crystal's unique blend of reversible thermal expansion with flexibility holds substantial promise for applications in flexible thermal actuators.
AbstractThe sustainable and resource-efficient production of wind energy plants requires the use of modern high-strength fine-grain structural steels. This applies to both foundation and erection structures, like mobile or ship cranes. During the assembly of steel structures, unacceptable defects can occasionally be found in the weld area. In most cases, the economical solution would be local thermal gouging of the affected areas and re-welding. Due to the high shrinkage restraint of the joint groove in the overall structure, the superposition of global and local welding-induced stresses may lead to crack formation and component failure, particularly in interaction with the degradation of the microstructure and mechanical properties of high-strength steels during the repair process. However, manufacturers hardly have any information about these issues and there is a lack of recommendations and guidelines to take these safety-relevant aspects into account in adequate repair concepts. The aim of this research is to derive recommendations for repair concepts appropriate to the stresses and materials involved providing a basis for standards and guidelines to avoid cold cracking, damage and expensive reworking especially for high-strength steels. Part 1 of this study involves systematic investigations of influences of shrinkage restraint during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures. The quantification of the shrinkage restraint of repair weld joints was achieved by means of experimental and numerical restraint intensity analysis. In welding experiments with self-restrained slot specimens, restraint intensity and introduction of hydrogen via the welding arc using anti spatter spray were varied systematically to analyse the effect on welding result, residual stresses and cold cracking. It could be shown that increasing restraint intensities result in significantly higher transverse residual stress levels. In the case of hydrogen introduction S500MLO showed no cold cracking independent of the restraint conditions. However, S960QL was found to be considerably cold cracking sensitive if hydrogen is introduced. With increasing restraint intensity length and number of cold cracks increases significantly. Part 2 [1] of this study is focussed on microstructure and residual stresses due to gouging and stress optimization via adequate heat control parameters in repair welding.
Maintaining and modulating mechanical anisotropy is essential for biological processes. However, how this is achieved at the microscopic scale in living soft matter is not always clear. Although Brillouin light scattering (BLS) spectroscopy can probe the mechanical properties of materials, spatiotemporal mapping of mechanical anisotropies in living matter with BLS microscopy has been complicated by the need for sequential measurements with tilted excitation and detection angles. Here we introduce Brillouin light scattering anisotropy microscopy (BLAM) for mapping high-frequency viscoelastic anisotropy inside living cells. BLAM employs a radial virtually imaged phased array that enables the collection of angle-resolved dispersion in a single shot, thus enabling us to probe phonon modes in living matter along different directions simultaneously. We demonstrate a precision of 10 MHz in the determination of the Brillouin frequency shift, at a spatial resolution of 2 µm. Following proof-of-principle experiments on muscle myofibres, we apply BLAM to the study of two fundamental biological processes. In plant cell walls, we observe a switch from anisotropic to isotropic wall properties that may lead to asymmetric growth. In mammalian cell nuclei, we uncover a spatiotemporally oscillating elastic anisotropy correlated to chromatin condensation. Our results highlight the role that high-frequency mechanics can play in the regulation of diverse fundamental processes in biological systems. We expect BLAM to find diverse applications in biomedical imaging and material characterization.
Using the method of directional solidification, single crystals of experimental nickel-based superalloys with negative, zero, and positive γ/γ' misfits are obtained. The γ' solvus, solidus, and liquidus temperatures of the alloys are determined, and the microstructures of the alloys after directional solidification, heat treatment, and creep tests are investigated. Creep tests are performed at temperatures of 800 and 1000°C. It is found that single crystals of the alloy with a negative γ/γ' misfit have the highest creep resistance and lifetime (the crystal lattice period of the γ' phase is smaller than that of the γ matrix).
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a “chaotic” (rough) surface from an aperiodic into a periodic structure.
Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to pronounced physical aging. In this study a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO were incorporated as a nanofiller (concentration range 0-10 wt%) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on aggregate level with domains up to 100 nm as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller.
As the molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method the gas permeability and the permselectivity were determined for N2, O2, CH4 and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50 % increase compared to pure PIM-1) was observed for a concentration of 5 wt% of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt%.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.
Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren.
This study investigates the mechanochemical reactions between AgBr 3-picolylamine and 4-picolylamine. The use of different stoichiometry ratios of the reagents allows [(AgBr)(n-pica)]n and [(AgBr)2(n-pica)]n to be obtained, and we report the new structures of [(AgBr)2(3-pica)]n and [(AgBr)2(4-pica)]n which are characterized by the presence of the following: (a) infinite inorganic chains, (b) silver atom coordinated only by bromide atoms and (c) argentophilic interactions. Furthermore, we studied the interconversion of [(AgBr)(n-pica)]n/[(AgBr)2(n-pica)]n by mechanochemical and thermal properties. The in situ experiments suggest that [(AgBr)(3-pica)]n is kinetically favoured while [(AgBr)2(3-pica)]n is converted into [(AgBr)(3-pica)]n only with a high excess of the ligand. Finally, the liquid nature of the ligands is not sufficient to assist the grinding process, and the complete reaction is observed with the addition of a small quantity of acetonitrile.
An observation of the fracture process in front of the crack tip inside a dentin sample by means of ex-situ X-ray computed tomography after uniaxial compression at different deformation values was carried out in this work. This ex-situ approach allowed the microstructure and fracturing process of human dentin to be observed during loading. No cracks are observed up to the middle part of the irreversible deformation in the samples at least visible at 0.4μm resolution. First cracks appeared before the mechanical stress reached the compression strength. The growth of the cracks is realized by connecting the main cracks with satellite cracks that lie ahead of the main crack tip and parallel its trajectory. When under the stress load the deformation in the sample exceeds the deformation at the compression strength of dentin, an appearance of micro-cracks in front of the main cracks is observed. The micro-cracks are inclined (~60°) to the trajectory of the main cracks. The further growth of the main cracks is not realized due to the junction with the micro-cracks; we assume that the micro-cracks dissipate the energy of the main crack and suppressed its growth. These micro-cracks serve as additional stress accommodations, therefore the samples do not break apart after the compression test, as it is usually observed under bending and tension tests.
Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Die additive Fertigung mittels Schweißverfahren bietet große ökonomische Vorteile für eine ressourceneffiziente Bauteilherstellung. Offene Fragen bezüglich Homogenität, Anisotropie der Schweißgefüge und den damit verbundenen Bauteileigenschaften stehen einer wirtschaftlichen Verarbeitung oftmals im Wege. Finale Bauteilgeometrie und Oberflächengüte erfordern meist komplementäre subtraktive Fertigungsschritte. Werkstoffe für hochbelastbare Komponenten sind oftmals schwer spanbar. In einem Vorhaben der BAM und des ISAF wurde untersucht, wie die Modifikation der AM-Schweißzusätze und das ultraschallunterstützte Fräsen (US) die Zerspanungssituation verbessern. Der vorliegende Artikel stellt wesentliche Zusammenhänge zwischen Legierung, Gefüge und Zerspanung zweier schwer spanbarer Hochleistungslegierungen (FeNi und CoCr) dar. Großes Potenzial zeigte neben dem US die Modifikation mit Zr und Hf bei Zulegierung in das Schweißgut mittels Beschichtung von Massivdrähten bzw. Herstellung von Fülldrähten.
The cleaning of aged silk fibers poses a common challenge in the conservation of textiles, since traditional cleaning techniques often yield unsatisfactory results or even harm objects. In this regard, cleaning objects with laser radiation is a promising addition to the range of available methods. Due to it being contactless, even brittle and touch-sensitive objects with disfiguring or harmful soiling could potentially be cleaned and therefore made accessible for research and presentation. Examples of treatment have sometimes shown spectacular results. Still there is some skepticism concerning the safety of this treatment for textile materials, which has been strengthened through previous 532 nm wavelength nanosecond laser cleaning studies on silk fibers. Taking these published results into account, the range of examined laser parameters has been extended in this study, from 532 nm nanosecond laser to 1064 nm nanosecond and even 800 nm femtosecond laser, reevaluating the effect of this treatment on the fibers. The physicochemical processes taking place on the silk fibers when cleaning with lasers are complex and still not fully understood. The aim of this project was therefore to bring more clarification about potential effects of those processes on the condition of silk samples treated with a set of different parameters for wavelength, pulse duration, energy density and number of pulses per spot. It also looks at the influence of the presence of soiling on the results. The analysis of potential effects was then carried out using statistical methods and advanced analytics. Scanning electron microscopy, Fourier-transform infrared spectroscopy and colorimetry technology provided the required insights to better assess the effects. Results show that laser cleaning of silk fibers, like most other conventional cleaning techniques, is not completely without risk, but knowing what the possible effects are helps making decisions on whether the benefits of the technique used justify these risks.
The 2-methoxyphenol units (G-units) in lignin are modified by demethylation and oxidation to provide the activated lignin as one part of an advanced biobased two-component (2K) adhesive system, which exhibits promising shear strengths in dry and underwater applications. The activation of lignin is straightforward and generates quinones via demethylation and periodate oxidation. These act as Michael acceptors and react smoothly with multi-thiol-star polymers to yield thiol-catechol connectivities (TCCs). The mussel-inspired material platform acts as a very robust and versatile adhesive, combining low-cost and readily available lignin with multi-thiols to achieve outstanding adhesion strengths of up to 15 MPa in dry application. In particular, the 2K system is compatible with the marine biological environment and shows no acute toxicity to sensitive organisms such as fish eggs. Thus, one possible application of this material could be an adhesive for setting temperature-resistant corals in damaged reefs.
Luminescence lifetimes are an attractive analytical method for detection due to its high sensitivity and stability. Iridium probes exhibit luminescence with long excited-state lifetimes, which are sensitive to the local environment. Perfluorooctanoic acid (PFOA) is listed as a chemical of high concern regarding its toxicity and is classified as a “forever chemical”. In addition to strict limits on the presence of PFOA in drinking water, environmental contamination from industrial effluent or chemical spills requires rapid, simple, accurate, and cost-effective analysis in order to aid containment. Herein, we report the fabrication and function of a novel and facile luminescence sensor for PFOA based on iridium modified on gold surfaces. These surfaces were modified with lipophilic iridium complexes bearing alkyl chains, namely, IrC6 and IrC12, and Zonyl-FSA surfactant. Upon addition of PFOA, the modified surfaces IrC6-FSA@Au and IrC12-FSA @Au show the largest change in the red luminescence signal with changes in the luminescence lifetime that allow monitoring of PFOA concentrations in aqueous solutions. The platform was tested for the measurement of PFOA in aqueous samples spiked with known concentrations of PFOA and demonstrated the capacity to determine PFOA at concentrations >100 μg/L (240 nM).
Abstract
In the post-processing of large maritime components, a considerable amount of waste in the form of milling and grinding chips is produced. At the same time, additive manufacturing technologies have shown great potential in producing high-volume parts for maritime applications, allowing novel design approaches and short lead times. In this context, this study presents a sustainable approach to recycle and use aluminium bronze waste material, generated during post-processing of large cast ship propellers, as feedstock for laser-powder directed energy deposition. The recycling technology used to produce powder batches is inductive re-melting in combination with ultrasonic atomization. The derived metal powders are characterized using digital image analysis, powder flowability tests, scanning electron microscopy as well as energy dispersive X-ray spectroscopy. Compared to conventional metal powders produced by gas atomization, the recycled material shows excellent sphericity and a powder size distribution with a higher content of finer and coarser particles. Metallographic sections of deposited additively produced specimens show an increased hardness and reduced ductility, but also competitive densities and higher yield and ultimate tensile strength compared to cast material. The process chain shows high potential for the maritime sector to enable circular and sustainable manufacturing.
Efficient density evolution during sintering of the as-printed component is vital to reach full densification and required properties of binder jet (BJT) components. However, due to the high porosity and brittle nature of the green compact, analysis of the microstructure development during sintering is very difficult, resulting in lack of understanding of the densification process. Density development from green state (57 ± 1.6 %) up to full density (99 ± 0.3 %) was characterized by high-resolution synchrotron X-Ray computed tomography (SXCT) on BJT 316L samples from ex-situ interrupted sintering tests. Periodicity of density fluctuations along the building direction was revealed for the first time and was related to the layer thickness of ~ 42 μm during printing that decreased down to ~ 33 μm during sintering. Sintering simulations, utilizing a continuum sintering model developed for BJT, allowed to replicate the density evolution during sintering with a mean error of 2 % and its fluctuation evolution from green (1.66 %) to sintered (0.56 %) state. Additionally, simulation of extreme particle size segregation (1 μm to 130 μm) suggested that non-optimized printing could lead to undesirable density fluctuation amplitude rapid increase (~10 %) during sintering. This might trigger the nucleation of defects (e.g., layer delamination, cracking, or excessive residual porosity) during the sintering process.
Die neue Generation von bainitischen Schmiedestählen bietet auf der einen Seite ein erhebliches Festigkeitspotenzial, das es im Sinne des Leichtbaus auch für zyklisch belastete Sicherheitsbauteile zu heben gilt. Auf der anderen Seite geht mit dieser Festigkeitssteigerung im Vergleich zu Vergütungsstählen ein Verlust an Duktilität und Zähigkeit einher. Am Beispiel des Demonstratorbauteils Achsschenkel ging das Forschungsvorhaben der Frage nach, wie ein Freigabeprozess zu gestalten ist, damit das Festigkeitspotenzial der neuen Stähle zuverlässig ausgenutzt werden kann. Als Ergebnis wird eine Vorgehensweise dargestellt, die den Eigenschaften der neuen Generation von Schmiedestählen Rechnung trägt, um den sicheren Betrieb der Komponenten zu gewährleisten.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.
Noble metal-free nanoparticles (NPs) based on multi-principal element alloys (MPEAs) were synthesized using a one-step pulsed laser ablation in liquids (PLALs) method for the electrochemical reduction of CO2. Laser ablation was performed in pure water or poly-(diallyldimethylammonium chloride) (PDADMAC)-containing an aqueous solution of Al8Cr17Co17Cu8Fe17Ni33 MPEA targets. Transmission electron microscopy (TEM) measurements combined with energy dispersive X-ray (EDX) mapping were used to characterize the structure and composition of the laser-generated MPEA nanoparticles (MPEA-NPs). These results confirmed the presence of a characteristic elemental distribution of a core-shell phase structure as the predominant NP species. The electrocatalytic performance of the laser-generated MPEA-NPs was characterized by linear sweep voltammetry (LSV) demonstrating an enhanced electrocatalytic CO2 activity for PDADMAC-stabilized NPs. The findings of these investigations indicate that MPEAs have great potential to replace conventional, expensive noble metal electrocatalysts.
The production of plastics is rising since they have been invented. Micro, submicro- and nanoplastics are produced intentionally or generated by environmental processes, and constitute ubiquitous contaminants which are ingested orally by consumers. Reported health concerns include intestinal translocation, inflammatory response, oxidative stress and cytotoxicity. Every digestive milieu in the gastrointestinal tract does have an influence on the properties of particles and can cause changes in their effect on biological systems. In this study, we subjected plastic particles of different materials (polylactic acid, polymethylmethacrylate, melamine formaldehyde) and sizes (micro- to nano-range) to a complex artificial digestion model consisting of three intestinal fluid simulants (saliva, gastric and intestinal juice). We monitored the impact of the digestion process on the particles by performing Dynamic Light Scattering, Scanning Electron Microscopy and Asymmetric Flow Field-Flow Fractionation. An in vitro model of the intestinal epithelial barrier was used to monitor cellular effects and translocation behavior of (un)digested particles. In conclusion, artificial digestion decreased cellular interaction and slightly increased transport of all particles across the intestinal barrier. The interaction with organic matter resulted in clear differences in the agglomeration behavior. Moreover, we provide evidence for polymer-, size- and surface-dependent cellular effects of the test particles.
Iron oxide of various structures is frequently used as food colorant (E 172). The spectrum of colors ranges from yellow over orange, red, and brown to black, depending on the chemical structure of the material. E 172 is mostly sold as solid powder. Recent studies have demonstrated the presence of nanoscaled particles in E 172 samples, often to a very high extent. This makes it necessary to investigate the fate of these particles after oral uptake. In this study, 7 differently structured commercially available E 172 food colorants (2 x Yellow FeO(OH), 2 x Red Fe2O3, 1 x Orange Fe2O3 + FeO(OH) and 2 x Black Fe3O4) were investigated for particle dissolution, ion release, cellular uptake, crossing of the intestinal barrier and toxicological impact on intestinal cells. Dissolution was analyzed in water, cell culture medium and artificial digestion fluids. Small-angle X-ray scattering (SAXS) was employed for determination of the specific surface area of the colorants in the digestion fluids. Cellular uptake, transport and toxicological effects were studied using human differentiated Caco-2 cells as an in vitro model of the intestinal barrier. For all materials, a strong interaction with the intestinal cells was observed, albeit there was only a limited dissolution, and no toxic in vitro effects on human cells were recorded.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.
With 2,2-dibutyl-2-stanna-1,3-dithiolane (DSTL) and 2-stanna-1,3-dioxa-4,5,6,7-dibenzoxepane (SnBiPh) as catalysts ring-expansion polymerizations (REP) were performed either in 2 M solution using three different solvents and two different temperatures or in bulk at 140 and 120 ◦C. A kinetically controlled rapid REP up to weight average molecular masses (Mẃs) above 300 000 was followed by a slower degradation of the molecular masses at 140 ◦C, but not at 120 ◦C Furthermore, a low molecular mass cyclic poly(L-lactide) (cPLA) with a Mn around 16 000 was prepared by polymerization in dilute solution and used as starting material for ring-ring equilibration at 140 ◦C in 2 M solutions. Again, a decrease of the molecular mass was detectable, suggesting that the equilibrium Mn is below 5 000. The degradation of the molecular masses via RRE was surprisingly more effective in solid cyclic PLA than in solution, and a specific transesterification mechanism involving loops on the surface of crystallites is proposed. This degradation favored the formation of extended-ring crystallites, which were detectable by a “saw-tooth pattern” in their MALDI mass spectra.
A density-based phase field model is developed where the free energy functional is explicitly linked with molecular dynamics and is referred to as the Molecular Phase Field Method (MoPF). MoPF simulations involve expressing interatomic potentials in terms of density to form a density based free energy functional. Inputs to this functional are taken from atomistics such that the phase field density profile matches the corresponding density profile from atomistic simulations. We analyze our results by comparing the MoPF calculated excess interfacial energies with excess interfacial energies calculated using molecular dynamics associated with several nickel grain boundaries. Additionally, a comparison is made between our results and the interfacial energies of a \Sigma7 boundary across a variety of FCC systems simulated using density functional theory. The MoPF method is able to successfully predict grain boundary free energy trends between grain boundary and material types offering an atomistically informed mesoscale formulation for studying grain boundary physics.
A route to a ZrF4 catalyst active in room temperature Friedel–Crafts and dehydrofluorination reactions was developed via a fluorolytic sol–gel route, which was followed by a postfluorination step using a stream of CHClF2. The behaviour of different Zr(IV) precursors in a sol–gel reaction with anhydrous isopropanol/HF solution was investigated. The subsequent post-fluorination step was optimised in its temperature ramp and confirmed the necessity of a fluorination of the generated xerogels to obtain catalytic activity. The process is discussed in the context of the analysis of the materials using Brunauer–Emmett–Teller analysis (BET), powder X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The local structure of the amorphous catalyst was elucidated by extended X-ray absorption fine structure spectroscopy (EXAFS).
This study investigates the sintering and crystallization behavior and kinetic of the bioactive glass (BG) 13–93 with nominal composition (in mol%): 54.6 SiO2 - 1.7 P2O3 - 22.1 CaO - 6.0 Na2O - 7.9 K2O - 7.7 MgO. Sintering and crystallization were investigated non-isothermally for various particle size fractions smaller than 315 μm as well as for bulk samples. Densification was not hindered by the presence of crystalline phases across all particle size fractions. Afterwards, wollastonite was found as the dominant crystal phase at higher temperature which resorb primary surface precipitation-like quartz crystallites. The growth direction shifts into volume when the sample surface is nearly covered. The crystal growth rate of wollastonite was calculated from the crystalline surface layer thickness measured during heating. The findings of this study are relevant for the high temperature processing of BG 13–93.
Mean-field modeling and Phase-field simulation of Grain Growth under Directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> \propto t^n with an exponent n ~ 0.6–0.7. The exponent
exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n~0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.
We demonstrate the determination of anharmonic acoustic phonon properties via second-order Raman scattering exemplarily on copper iodide single crystals. The origin of multi-phonon features from the second-order Raman spectra was assigned by the support of the calculated 2-phonon density of states. In this way, the temperature dependence of acoustic phonons was determined down to 10 K. To determine independently the harmonic contributions of respective acoustic phonons, density functional theory in quasi-harmonic approximation was used. Finally, the anharmonic contributions were determined. The results are in agreement with earlier publications and extend CuI’s determined acoustic phonon properties to lower temperatures with higher accuracy. This approach demonstrates that it is possible to characterize the acoustic anharmonicities via Raman scattering down to zero-temperature renormalization constants of at least 0.1 cm−1.
The polarization of the laser beam exhibits more substantial differences in laser micromachining as the angle of incidence deviates from zero. In the reported work, our focus was to explore the effects of circularly, p- and s-polarized laser on angled ultrashort pulse laser micromachining of micropillar arrays. The examination encompassed laser process factors, including angles of incidence, microstructure dimensions, and inter-pillar spacing. A comparison between the resulting structures demonstrated that p-polarized laser beam was the most efficient in material removal in angled laser micromachining, followed by circularly polarized laser. While the s-polarized beam exhibited the lowest ablation efficiency among the three. Such distinction is mainly attributed to the distinguishing reflectivity of the three states of polarization on tilted planes. The development of structural heights during ablation processes was examined, and potential defects in laser processing methodologies were interpreted. The dependency of structural heights on inter-pillar spacing was analyzed. This study bridges the gap between existing studies on angled ultrashort pulse laser machining and the influences of polarization on laser machining. The comparison between structures produced using laboratory-scale and industrial-scale laser systems also yielded pertinent recommendations for facilitating a smooth transition of angled laser micromachining from laboratory-scale research to industrial applications.
High-strength steels offer potential for weight optimization due to reduced wall thicknesses in modern constructions. Additive manufacturing processes such as Wire Arc Additive Manufacturing (WAAM) enable the resource-efficient production of structures. In the case of defects occurring in weld seams orWAAM components due to unstable process conditions, the economical solution is local gouging or machining and repair welding. It is important to understand the effects of machining steps on the multiaxial stress state in conjunction with the design-related shrinkage restraints. Research into how welding and slot milling of welds andWAAM structures affects residual stresses is still lacking. For this reason, component-related investigations with high-strength steels with yield strengths ≥790 MPa are carried out in our research. In-situ digital image correlation (DIC) and ex-situ X-ray diffraction (XRD) were used to analyze the stresses and strains induced on specimens during and after milling. The systematic analyses revealed a significant interaction of the stiffness and microstructure of the specimens with the initial residual stresses induced by welding. Subsequent repair welds can result in significantly higher residual stresses.
We present Jobflow, a domain-agnostic Python package for writing computational workflows tailored for high-throughput computing applications. With its simple decorator-based approach, functions and class methods can be transformed into compute jobs that can be stitched together into complex workflows. Jobflow fully supports dynamic workflows where the full acyclic graph of compute jobs is not known until runtime, such as compute jobs that launch
other jobs based on the results of previous steps in the workflow. The results of all Jobflow compute jobs can be easily stored in a variety of filesystem- and cloud-based databases without the data storage process being part of the underlying workflow logic itself. Jobflow has been intentionally designed to be fully independent of the choice of workflow manager used to dispatch the calculations on remote computing resources. At the time of writing, Jobflow
workflows can be executed either locally or across distributed compute environments via an adapter to the FireWorks package, and Jobflow fully supports the integration of additional workflow execution adapters in the future.
The production of plastics is rising since they have been invented. Micro, submicro- and nanoplastics are produced intentionally or generated by environmental processes, and constitute ubiquitous contaminants which are ingested orally by consumers. Reported health concerns include intestinal translocation, inflammatory response, oxidative stress and cytotoxicity. Every digestive milieu in the gastrointestinal tract does have an influence on the properties of particles and can cause changes in their effect on biological systems. In this study, we subjected plastic particles of different materials (polylactic acid, polymethylmethacrylate, melamine formaldehyde) and sizes (micro- to nano-range) to a complex artificial digestion model consisting of three intestinal fluid simulants (saliva, gastric and intestinal juice). We monitored the impact of the digestion process on the particles by performing Dynamic Light Scattering, Scanning Electron Microscopy and Asymmetric Flow Field-Flow Fractionation. An in vitro model of the intestinal epithelial barrier was used to monitor cellular effects and translocation behavior of (un)digested particles. In conclusion, artificial digestion decreased cellular interaction and slightly increased transport of all particles across the intestinal barrier. The interaction with organic matter resulted in clear differences in the agglomeration behavior. Moreover, we provide evidence for polymer-, size- and surface-dependent cellular effects of the test particles.
Reliable measurement of the size of polydisperse, complex-shaped commercial nanopowders is a difficult but necessary task, e.g., for regulatory requirements and toxicity risk assessment. Suitable methods exist for the accurate characterization of the size of non-aggregated, stabilized, spherical and monodisperse nanoparticles. In contrast, industrial nanoscale powders usually require dedicated sample preparation procedures developed for the analysis method of choice. These nano-powders tend to agglomerate and/or aggregate, a behavior which in combination with an innate broad particle size distribution and irregular shape often significantly alters the achievable accuracy of the measured size parameters. The present study systematically tests two commercially available nanoscale powders using different sample preparation methods for correlative analysis by scanning electron microscopy, dynamic light scattering, Brunauer–Emmet–Teller method and differential mobility analysis. One focus was set on the sample preparation by embedding nanoparticles in carbon-based hot-mounting resin. Literature on this topic is scarce and the accuracy of the data extracted from cross sections of these particles is unclearly stated. In this paper systematic simulations on the deviation of the size parameters of well-defined series of nanoparticles with different shapes from the nominal value were carried out and the contributing factors are discussed.
Knowledge representation in the Materials Science and Engineering (MSE) domain is a vast and multi-faceted challenge: Overlap, ambiguity, and inconsistency in terminology are common. Invariant (consistent) and variant (context-specific) knowledge are difficult to align cross-domain. Generic top-level semantic terminology often is too abstract, while MSE domain terminology often is too specific. In this paper, an approach how to maintain a comprehensive MSE-centric terminology composing a mid-level ontology–the Platform MaterialDigital Core Ontology (PMDco)–via MSE community-based curation procedures is presented. The illustrated findings show how the PMDco bridges semantic gaps between high-level, MSE-specific, and other science domain semantics. Additionally, it demonstrates how the PMDco lowers development and integration thresholds. Moreover, the research highlights how to fuel it with real-world data sources ranging from manually conducted experiments and simulations with continuously automated industrial applications.
The usefulness of seven different Tin catalysts, Bismuth subsalicylate and Titan tetra(ethoxide) for the polycondensation of ethyl L-lactate (ELA) was examined at 150 °C/6 d. Dibutyltin bis(phenoxides) proved to be particularly effective. Despite the low reactivity of ELA, weight average molecular masses (Mw) up to 12 500 were found along with partial crystallization. Furthermore, polylactides (PLAs) of similar molecular masses were prepared via ELA-initiated ROPs of L-lactide by means of the four most effective polycondensation catalysts. The crystalline linear PLAs were annealed at 140 or 160 °C in the presence of these catalysts. The consequences of the transesterification reactions in the solid PLAs were studied by means of matrix-assisted laser desorption/ionization (MALDI TOF) mass spectrometry, gel permeation chromatography (GPC) and small-angle X-ray scattering (SAXS). The results indicate that polycondensation and formation of cycles proceed in the solid state via formation of loops on the surface of the crystallites. In summary, five different transesterification reactions are required to explain all results.
A systematic study on a face‐centered cubic‐based compositionally complex alloy system Al–Co–Cr–Cu–Fe–Ni in its single‐phase state is carried out, where a mother senary compound Al₈Co₁₇Cr₁₇Cu₈Fe₁₇Ni₃₃ and five of its suballoys, obtained by removing one element at a time, are investigated and exhaustively analyzed determining the contribution of each alloying element in the solid solution. The senary and the quinaries are compared using experimental techniques including X‐ray absorption spectroscopy, X‐ray diffraction, transmission electron microscopy, and first principles hybrid Monte Carlo/molecular dynamics simulations. Chemical short‐range order and bond length distances have been determined both at the experimental and computational level. Electronic structure and local atomic distortions up to 5.2 Å have been correlated to the microhardness values. A linear regression model connecting hardness with local lattice distortions is presented.
In this work, the thermal properties of ternary Li₃ₓCo₇₋₄ₓSb₂₊ₓO₁₂ solid solutions are studied for different concentrations in the range 0 ≤ x ≤ 0.7. Samples are elaborated at four different sintering temperatures: 1100, 1150, 1200 and 1250 °C. The effect of increasing the content of Li⁺ and Sb⁵⁺, accompanied by the reduction of Co²⁺, on the thermal properties is studied. It is shown that a thermal diffusivity gap, which is more pronounced for low values of x, can be triggered at a certain threshold sintering temperature (around 1150 °C in this study). This effect is explained by the increase of contact area between adjacent grains. Nevertheless, this effect is found to be less pronounced in the thermal conductivity. Moreover, a new framework for heat diffusion in solids is presented that establishes that both the heat flux and the thermal energy (or heat) satisfy a diffusion equation and therefore highlights the importance of thermal diffusivity in transient heat conduction phenomena.
The hydrogen permeation current increase was noticed for carbon steel in 0.5 mol/L NaCl solution under strong anodic potentials, which is contrary to the common understanding. Hydrogen permeation under cathodic potentials has been widely studied because of possible hydrogen embrittlement failures of high strength steels in seawater, but investigations of anodic polarization on hydrogen permeation are fairly rare, as the hydrogen evolution reaction shall be retarded. To corroborate the observed phenomenon, experiments were conducted using both as-received and vacuum-annealed sheet specimens. It was verified that the observed phenomena originated from the released hydrogen in traps by metal dissolution under anodic polarization.
The feasibility of microbial hydrogen consumption to mitigate the hydrogen embrittlement (HE) under different cathodic potentials was evaluated using the Devanathan-Stachurski electrochemical test and the hydrogen permeation efficiency h. The hydrogen permeation efficiency h in the presence of strain GA-1 was lower than that in sterile medium. The cathodic potential inhibited the adherence of strain GA-1 to AISI 4135 steel surface, thereby reducing the hydrogen consumption of strain GA-1. The adherent GA-1 cells were capable of consuming ‘cathodic hydrogen’ and reducing the proportions of absorbed hydrogen, indicating that it is theoretically possible to control HE by hydrogen-consuming microbes.
Manufacturing austenitic stainless steels (ASSs) using additive manufacturing is of great interest for cryogenic applications. Here, the mechanical and microstructural responses of a 316L ASS built by laser powder bed fusion were revealed by performing in situ neutron diffraction tensile tests at the low-temperature range (from 373 to 10 K). The stacking fault energy almost linearly decreased from 29.2 ± 3.1 mJm⁻² at 373 K to 7.5 ± 1.7 mJm⁻² at 10 K, with a slope of 0.06 mJm⁻²K⁻¹, leading to the transition of the dominant deformation mechanism from strain-induced twinning to martensite formation. As a result, excellent combinations of strength and ductility were achieved at the low-temperature range.
Future lunar exploration will be based on in-situ resource utilization (ISRU) techniques. The most abundant raw material on the Moon is lunar regolith, which, however, is very scarce on Earth, making the study of simulants a necessity. The objective of this study is to characterize and investigate the sintering behavior of EAC-1A lunar regolith simulant. The characterization of the simulant included the determination of the phase assemblage, characteristic temperatures determination and water content analysis. The results are discussed in the context of sintering experiments of EAC-1A simulant, which showed that the material can be sintered to a relative density close to 90%, but only within a very narrow range of temperatures (20–30 °C). Sintering experiments were performed for sieved and unsieved, as well as for dried and non-dried specimens of EAC-1A. In addition, an analysis of the densification and mechanical properties of the sintered specimens was done. The sintering experiments at different temperatures showed that the finest fraction of sieved simulant can reach a higher maximum sintering temperature, and consequently a higher densification and biaxial strength. The non-dried powder exhibited higher densification and biaxial strength after sintering compared to the dried specimen. This difference was explained with a higher green density of the non-dried powder during pressing, rather than due to an actual influence on the sintering mechanism. Nevertheless, drying the powder prior to sintering is important to avoid the overestimation of the strength of specimens to be fabricated on the Moon.
The new multi-element alloying concept of systems with defined entropy (HEA — high-entropy alloy or MEA — medium-entropy alloy) is increasing in material research interest. Improved properties or combinations of properties are shown by several systems. Thus, the resulting microstructures and production of HEA/MEA as well as properties have been primarily investigated so far. Furthermore, processing is a key issue to transfer HEA/MEA systems to real components. Since welding is the most important joining process for metals, it is crucial to investigate the influence of welding to guarantee component integrity. Since most HEA are made of expensive alloying elements such as Co or Ni, they will not be used entirely as structural materials. Thus, it can be advantageous to weld conventional alloys such as austenitic stainless steels with the HEA and MEA to produce components that are both application-oriented and economically viable. Therefore, in this paper, first results of dissimilar metal welding, by tungsten inert gas (TIG) and friction stir welding (FSW), of a CoCrFeMnNi HEA as well as a CoCrNi MEA with a conventional AISI 304 austenitic stainless steel are presented. The focus is on the microstructure formation due to the two welding processes. The results of TIG welding show a dendritic microstructure, whereas in FSW both materials are stirred but still coexist.
Laser powder bed fusion of metallic components (PBF-LB/M) is gaining acceptance in industry. However, the high costs and lengthy qualification processes required for printed components create the need for more effective in-situ monitoring and testing methods. This article proposes multispectral Optical Tomography (OT) as a new approach for monitoring the PBF-LB/M process. Compared to other methods, OT is a low-cost process monitoring method that uses long-time exposure imaging to observe the build process. However, it lacks time resolution compared to expensive thermographic sensor systems. Monochromatic OT (1C-OT) is already commercially available and observes the building process layer-wise using a single wavelength window in the NIR range. Multispectral OT (nC-OT) utilizes a similar setup but can measure multiple wavelength ranges per location simultaneously. By comparing the classical 1C-OT and nC-OT approaches, this article examines the advantages of nC-OT (two channel OT and RGB-OT) in reducing the false positive rate for process deviations and approximating maximum temperatures for a better comparison between different build processes and materials. This could ultimately reduce costs and time for part qualification. The main goal of this contribution is to assess the advantages of nC-OT compared to 1C-OT for in-situ process monitoring of PBF-LB/M.
Offshore wind turbines continuously increase in size and weight and demand adequate offshore foundations concepts like monopiles, tripods, or jackets. These components are typically constructed using submerged arc welding (SAW) with high-strength thick steel plates like the S420ML. During welding, the occurrence of delayed hydrogen-assisted cracking (HAC) must be anticipated. HAC is a critical combination of the local hydrogen concentration within a susceptible microstructure under certain mechanical load, i.e., the occurring (welding) residual stresses. The welding sequence of the thick-walled plates complicates the residual stress distribution due to the necessary repeated thermal cycling, i.e., welding seam/layer deposition to fill the joint. For that purpose, SAW with two-wire-technique was used to weld a specially designed and prototype-like mock-up of a real component with a thickness of 50 mm, filled with over 20 passes and a seam length of 1000 mm. Additional welded stiffeners simulated the effect of a high restraint, to achieve critical HAC conditions. The necessity of a minimum waiting time (MWT) before the NDT can be conducted (to exclude HAC) was critically verified by the application of ultrasonic testing of the welded joint at different time-steps of the NDT of up to 48 h after the completion welding. The residual stresses were determined by a robot XRD goniometer. Tensile residual stresses up to the yield limit are found both in the weld metal and in the heat-affected zone. Numerical modeling allowed the qualitative estimation of the hydrogen diffusion in the weld. No noticeable HAC occurrence was identified and confirms the high cracking resistance of the investigated material. Finally, the applicability of the MWT concept should be critically discussed.
Here, we elucidate nonclassical multistep crystallization pathways of transition metal phosphates from aqueous solutions. We followed precipitation processes of M-struvites, NH4MPO4·6H2O, and M-phosphate octahydrates, M3(PO4)2·8H2O, where M = Ni, Co, or NixCo1–x, by using in situ scattering and spectroscopy-based techniques, supported by elemental mass spectrometry analyses and advanced electron microscopy. Ni and Co phosphates crystallize via intermediate colloidal amorphous nanophases, which change their complex structures while agglomerating, condensing, and densifying throughout the extended reaction times. We reconstructed the three-dimensional morphology of these precursors by employing cryo-electron tomography (cryo-ET). We found that the complex interplay between metastable amorphous colloids and protocrystalline units determines the reaction pathways. Ultimately, the same crystalline structure, such as struvite, is formed. However, the multistep process stages vary in complexity and can last from a few minutes to several hours depending on the selected transition metal(s), their concentration, and the Ni/Co ratio.
(1) Background: The desire to avoid autograft harvesting in implant dentistry has prompted an ever-increasing quest for bioceramic bone substitutes, which stimulate osteogenesis while resorbing in a timely fashion. Consequently, a highly bioactive silicon containing calcium alkali orthophosphate (Si-CAP) material was created, which previously was shown to induce greater bone cell maturation and bone neo-formation than β-tricalcium phosphate (β-TCP) in vivo as well as in vitro. Our study tested the hypothesis that the enhanced effect on bone cell function in vitro and in sheep in vivo would lead to more copious bone neoformation in patients following sinus floor augmentation (SFA) employing Si-CAP when compared to β-TCP. (2) Methods: The effects of Si-CAP on osteogenesis and Si-CAP resorbability were evaluated in biopsies harvested from 38 patients six months after SFA in comparison to β-TCP employing undecalcified histology, histomorphometry, and immunohistochemical analysis of osteogenic marker expression. (3) Results: Si-CAP as well as β-TCP supported matrix mineralization and bone formation. Apically furthest away from the original bone tissue, Si-CAP induced significantly higher bone formation, bone-bonding (bone-bioceramic contact), and granule resorption than β-TCP. This was in conjunction with a higher expression of osteogenic markers. (4) Conclusions: Si-CAP induced higher and more advanced bone formation and resorbability than β-TCP, while β-TCP’s remarkable osteoconductivity has been widely demonstrated. Hence, Si-CAP constitutes a well-suited bioactive graft choice for SFA in the clinical arena.
Large temperature gradients inherent to additive manufacturing (AM) processes induce large residual stress (RS) in the final part. Because RS can influence the tribological properties, this study focuses on the relationship between wear sliding properties and RS in IN718 coatings. Such coatings were deposited with a Laser metal deposition (LMD) machine using two different scanning strategies.
The wear resistance and RS state were investigated after surface milling. RS were measured before and after wear tests on a reciprocating sliding test apparatus.
Two different X-ray diffraction techniques were employed to measure the surface and subsurface state RS: Laboratory Energy Dispersive X-ray Diffraction (LEDXD) and Synchrotron X-ray Energy Dispersive Diffraction (SXEDD). Due to the milling process, the coatings show similar depth distributions of RS from 22 to 92 μm depth, but exhibit different magnitudes depending on the scanning strategy used. Reciprocating sliding wear tests induced high compressive residual stresses that erased the initial RS state, and a similar wear behavior was observed in the two samples. These samples possess similar texture and grain morphology. This demonstrates that the influence of RS on wear resistance is a second-order effect. Nevertheless, it was observed that RS can still impact the wear performance at the early testing stages of the repaired parts.
We report the selective ring opening copolymerisation (ROCOP) of
oxetane and phthalic thioanhydride by a heterobimetallic Cr(III)K
catalyst precisely yielding semi-crystalline alternating poly(esteralt-
thioesters) which show improved degradability due to the
thioester links in the polymer backbone.
Die Fourier-Transformations-Infrarot-Spektroskopie (FTIR-Spektroskopie) stellt eine innovative und wirkungsvolle Methode zur Charakterisierung von Bitumen und bitumenhaltigen Bindemitteln dar. So erlaubt die FTIRCharakterisierung nicht nur eine Bewertung des Alterungsfortschritts eines Bindemittels, sondern zudem auch die Identifizierung von im Bitumen enthaltenen Additiven und Schadstoffen wie z. B. polyzyklischen aromatischen Kohlenwasserstoffen (PAK), die Ableitung verschiedener physikalischer und chemischer Kennwerte sowie weiterhin eine Klassifizierung von Bindemitteln nach verschiedenen übergeordneten Eigenschaften wie der Raffinerie, dem Alterungszustand und auch der Alterungsempfindlichkeit.
Synthesis of Li ion battery materials via ball milling has been a huge area of growth, leading to new high-capacity electrode materials, such as a number of promising disordered rocksalt (DRS) phases. In prior work, it was generally assumed that the synthesis was facilitated simply by local heating effects during the milling process. In this work, we show that ball milling Li2MoO4 leads to a phase transformation to the high pressure spinel polymorph and we report electrochemical data for this phase. This observation of the formation of a high pressure polymorph shows that local heating effects alone cannot explain the phase transformation observed (phenakite to spinel) and so indicates the importance of other effects. In particular, we propose that when the milling balls collide with the material, the resulting shockwaves exert a localised pressure effect, in addition to local heating. To provide further support for this, we additionally report ball milling results for a number of case studies (Li2MnO3, Li2SnO3, Nb2O5) which reinforces the conclusion that local heating alone cannot explain the phase transformations observed. The work presented thus provides greater fundamental understanding of milling as a synthetic pathway and suggests potential strategies to prepare such samples without milling (e.g., doping to create internal chemical pressure). In addition, we suggest that further research is needed into the effect of the use of milling as a route to smaller particles, since we believe that such milling may also be affecting the surface structure of the particles through the influence of the shockwaves generated.
This data article introduces a dataset comprising 1630 alkali-activated concrete (AAC) mixes, compiled from 106 literature sources. The dataset underwent extensive curation to address feature redundancy, transcription errors, and duplicate data, yielding refined data ready for further data-driven science in the field of AAC, where this effort constitutes a novelty. The carbon footprint associated with each material used in the AAC mixes, as well as the corresponding CO2 footprint of every mix, were approximated using two published articles. Serving as a foundation for future expansions and rigorous data applications, this dataset enables the characterization of AAC properties through machine learning algorithms or as a benchmark for performance comparison among different formulations. In summary, the dataset provides a resource for researchers focusing on AAC and related materials and offers insights into the environmental benefits of substituting traditional Portland concrete with AAC.
In recent decades, the number of components in concrete has grown, particularly in formulations aimed at reducing carbon footprints. Innovations include diverse binders, supplementary cementitious materials, activators, concrete admixtures, and recycled aggregates. These developments target not only the enhancement of material properties but also the mitigation of the ecological and economic impacts of concrete — the most extensively used material by humankind. However, these advancements also introduce a greater variability in the composition of raw materials. The material’s behavior is significantly influenced by its nanoscale properties, which can pose challenges in accurate characterization. Consequently, there’s an increasing need for experimental tuning of formulations. This is accompanied by a more inconsistent composition of raw materials, which makes an experimental tuning of formulations more and more necessary. However, the increased complexity in composition presents a challenge in finding the ideal formulation through trial and error. Inverse design (ID) techniques offer a solution to this challenge by allowing for a comprehensive search of the entire design space to create new and improved concrete formulations. In this publication, we introduce the concept of ID and demonstrate how our open-source app “SLAMD” provides all necessary steps of the workflow to adapt it in the laboratory, lowering the application barriers. The intelligent screening process, guided by a predictive model, leads to a more efficient and effective data-driven material design process resulting in reduced carbon footprint and improved material quality while considering socio-economic factors in the materials design.
Large-language models (LLMs) such as GPT-4 caught the interest of many scientists. Recent studies suggested that these models could be useful in chemistry and materials science. To explore these possibilities, we organized a hackathon. This article chronicles the projects built as part of this hackathon. Participants employed LLMs for various applications, including predicting properties of molecules and materials, designing novel interfaces for tools, extracting knowledge from unstructured data, and developing new educational applications. The diverse topics and the fact that working prototypes could be generated in less than two days highlight that LLMs will profoundly impact the future of our fields. The rich collection of ideas and projects also indicates that the applications of LLMs are not limited to materials science and chemistry but offer potential benefits to a wide range of scientific disciplines.
Interpreting high-temperature corrosion induced by mixed-gas atmospheres is challenging due to the different contributions of oxidizing gases. Here, a comprehensive study on the combined oxidation/sulfidation using label molecules is presented. Fe-Cr model alloys with 2 wt% and 9 wt% Cr were isothermally exposed using a volumetric mixture of 0.5%S16O2/27%H218O and 0.5%S16O2/7%H218O at 650 ◦C for 5 h and then characterized by secondary ion mass spectroscopy (SIMS). Additionally, the reactions were followed in-situ utilizing energy dispersive X-ray diffraction. The study showed that both S16O2 and H218O contribute to the oxidation of the alloys but to different extents depending on the Cr-content.
Titanium and its alloys are known to allow the straightforward laser-based manufacturing of ordered surface nanostructures, so-called high spatial frequency laser-induced periodic surface structures (HSFL). These structures exhibit sub-100 nm spatial periods – far below the optical diffraction limit. The resulting surface functionalities are usually enabled by both, topographic and chemical alterations of the nanostructured surfaces. For exploring these effects, multi-method characterizations were performed here for HSFL processed on Ti–6Al–4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm, ≈1 ps pulse duration, 1–400 kHz) under different laser scan processing conditions, i.e., by systematically varying the pulse repetition frequency and the number of laser irradiation passes. The sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), tactile stylus profilometry, as well as near-surface chemical analyses hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (ToF-SIMS). This provides a quantification of the laser ablation depth, the geometrical HSFL characteristics and enables new insights into the depth extent and the nature of the non-ablative laser-induced near-surface oxidation accompanying these nanostructures. This allows to answer the questions how the processing of HSFL can be industrially scaled up, and whether the latter is limited by heat-accumulation effects.
Although the use of noble metal catalysts can increase the efficiency of hydrogen evolution reaction, the process is still limited by the characteristics of the metal-hydrogen (M−H) bond, which can be too strong or too weak, depending on the metal employed. Studies revealed that the hydrogen affinity for the metal surface (i.e. H absorption/desorption) is regulated also by the potential at the metal nanoparticles. Through controlled periodic illumination (CPI) of a series of metal/TiO2 suspensions, here we demonstrated that an increase of the HER efficiency is possible for those photodeposited metals which have a Tafel slope below 125 mV. Two possible explanations are here reported, in both of them the M−H interaction and the metal covering level play a prominent role, which also depend on the prevailing HER mechanism (Volmer-Heyrovsky or Volmer-Tafel).