Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (632)
- Vortrag (581)
- Posterpräsentation (200)
- Forschungsdatensatz (67)
- Beitrag zu einem Tagungsband (27)
- Sonstiges (17)
- Forschungsbericht (13)
- Beitrag zu einem Sammelband (10)
- Buchkapitel (8)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (6)
Sprache
- Englisch (1462)
- Deutsch (113)
- Mehrsprachig (3)
- Spanisch (2)
Schlagworte
- Nanoparticles (122)
- Mechanochemistry (95)
- SAXS (89)
- XPS (60)
- Laser-induced periodic surface structures (LIPSS) (58)
- Automation (52)
- X-ray scattering (45)
- Electron microscopy (44)
- SEM (42)
- MALDI-TOF MS (41)
- Polylactide (36)
- Corrosion (34)
- In situ (34)
- VAMAS (34)
- Microplastics (33)
- HAXPES (32)
- TED-GC/MS (32)
- Surface functionalization (29)
- Small-angle X-ray scattering (28)
- Nanomaterials (27)
- Nanoparticle (27)
- Particle size distribution (26)
- MOUSE (25)
- Nanocomposites (23)
- Femtosecond laser (22)
- Mikroplastik (21)
- Reference materials (21)
- Boehmite (20)
- Standardisation (20)
- X-ray photoelectron spectroscopy (20)
- Crystallization (19)
- DFT (19)
- Thin films (19)
- Bonding analysis (18)
- Microplastic (18)
- Scattering (18)
- XRD (18)
- AFM (17)
- Catalysis (17)
- Ellipsometry (17)
- Geant4 (17)
- Laser processing (17)
- Simulation (17)
- Applications (16)
- NanoSolveIT (16)
- Radiation protection (16)
- Synthesis (16)
- Dosimetry (15)
- Materials Informatics (15)
- ToF-SIMS (15)
- Calcium sulfate (14)
- Conductivity (14)
- DNA (14)
- Inter-laboratory comparison (14)
- Interlaboratory comparison (14)
- Microdosimetry (14)
- Nanocomposite (14)
- Rigid amorphous fraction (14)
- Spectroscopic ellipsometry (14)
- Broadband dielectric spectroscopy (13)
- Computational Chemistry (13)
- Cyclization (13)
- Database (13)
- Femtosecond laser ablation (13)
- Geant4-DNA (13)
- Graphene (13)
- MCS (13)
- Machine learning (13)
- Sample preparation (13)
- Traceability (13)
- Workflows (13)
- XANES (13)
- EDS (12)
- MIC (12)
- Phonons (12)
- Polymer 3R (12)
- Reference material (12)
- Struvite (12)
- Bonding Analysis (11)
- C-F bond activation (11)
- Dielectric spectroscopy (11)
- Heterogeneous catalysis (11)
- Laser-induced X-ray emission (11)
- MOF (11)
- Phosphates (11)
- Polymer (11)
- Polymers (11)
- Polymorphism (11)
- Small angle scattering (11)
- X-ray diffraction (11)
- EBSD (10)
- Functionalized graphene (10)
- LEE (10)
- Methodology (10)
- Nanoplastics (10)
- Oxidation (10)
- Radiation damage (10)
- Ring-opening polymerization (10)
- Standardization (10)
- AuNP (9)
- Biofilm (9)
- Chemically Complex Materials (9)
- Cocrystal (9)
- Density functional theory (9)
- Diffraction (9)
- Flexible crystals (9)
- Glass transition (9)
- Laser-induced periodic surface structures, LIPSS (9)
- MOFs (9)
- Monte-Carlo simulation (9)
- Nanostructures (9)
- Oxygen evolution reaction (9)
- Phase diagrams (9)
- Radioactive decay (9)
- TED-GC-MS (9)
- TEM (9)
- Thin polymeric films (9)
- TiO2 (9)
- Additive manufacturing (8)
- BDS (8)
- CCMat (8)
- Data analysis (8)
- Energetic materials (8)
- Epoxy (8)
- Flash DSC (8)
- High-throughput (8)
- High-throughput computations (8)
- Hydrogen (8)
- In situ real-time monitoring (8)
- MALDI TOF MS (8)
- Magnetism (8)
- Materialbearbeitung (8)
- Metrology (8)
- Nanoconfinement (8)
- Protein (8)
- Synchrotron (8)
- XAS (8)
- Amorphous phases (7)
- Atomic force microscopy (7)
- Biobased polymers (7)
- Catalyst (7)
- DNA damage (7)
- Defects (7)
- Discotic Liquid Crystals (7)
- Dynamics (7)
- EXAFS (7)
- Electrocatalysis (7)
- Energy deposit (7)
- Fluorescence (7)
- Friction (7)
- Gold (7)
- Haftfestigkeit (7)
- High-entropy alloys (7)
- Ionic Liquid crystals (7)
- Mass spectrometry (7)
- Microstructures (7)
- Monte-Carlo simulations (7)
- Nanomaterial (7)
- Nanostructure (7)
- Polycondensation (7)
- Polydopamine (7)
- Polymerization (7)
- Radiationtherapy (7)
- Silver nanoparticles (7)
- Specific heat spectroscopy (7)
- TMDSC (7)
- TOPAS (7)
- Thin polymer films (7)
- Transition metals (7)
- Ultrashort laser material interaction (7)
- Ultrashort laser pulses (7)
- ZCF (7)
- Aktivkohle (6)
- Anhydrite (6)
- Atomic Force Microscopy (AFM) (6)
- Automated synthesis (6)
- Beta decay (6)
- Brachytherapy (6)
- Cancer treatment (6)
- Catalysts (6)
- Centrifugal Adhesion Testing (CAT) (6)
- EPMA (6)
- Electrochemistry (6)
- Fast Scanning Calorimetry (6)
- Gold Nanoparticles (6)
- High-pressure (6)
- ILC (6)
- Imaging (6)
- Kinetics (6)
- Klebfestigkeit (6)
- Lab automation (6)
- Laser ablation (6)
- Low energy electrons (6)
- Mechanical properties (6)
- Mesoporosity (6)
- Micropatterning (6)
- Microstructure (6)
- NP (6)
- Nanoplastic (6)
- Neutron scattering (6)
- Particle scattering simulations (6)
- Polyglycerol (6)
- Polymers of intrinsic microporosity (6)
- Radiation therapy (6)
- Size (6)
- Small-angle scattering (6)
- Small-angle x-ray scattering (6)
- Software (6)
- Steel (6)
- Surface chemistry (6)
- TOPAS-nbio (6)
- Thermoresponsive polymer (6)
- Titania nanoparticles (6)
- Topas (6)
- Transition metal (6)
- Transmission electron microscopy (6)
- UCST-type polymer (6)
- Ultrakurze Laserpulse (6)
- ZIF-8 (6)
- Ab initio simulations (5)
- Acrylamide (5)
- Adsorbed Layer (5)
- Adsorption (5)
- Analysis (5)
- Bacterial adhesion (5)
- Carbon nanotubes (5)
- Cement (5)
- Crystalinity (5)
- Deuterium (5)
- Ectoine (5)
- Elemental composition (5)
- FIB (5)
- G5P (5)
- Graphene oxide (5)
- Green chemistry (5)
- Gypsum (5)
- ISO/TC 202 (5)
- Instrumentation (5)
- Introduction (5)
- Ionic Liquid Crystals (5)
- LLG (5)
- Medium Entropy Alloys (5)
- Mesoporous iridium oxide films (5)
- Methanogens (5)
- Microbiologically influenced corrosion (5)
- Micromagnetism (5)
- Mikroplastik-Analytik (5)
- Multiphoton lithography (5)
- Nanotechnology (5)
- Nucleation (5)
- OH radical (5)
- OOMMF (5)
- Oxygen Reduction Reaction (5)
- PDF (5)
- PGM-free catalyst (5)
- Particle size (5)
- Photocatalysis (5)
- Polymer blends (5)
- Radiolysis (5)
- Raman (5)
- Reference data (5)
- Reproducibility (5)
- Ring-expansion polymerization (5)
- Risk assessment (5)
- Röntgenstrahlung (5)
- SAXS/WAXS (5)
- Shape (5)
- Silicon (5)
- Strahlenschutz (5)
- Surfaces (5)
- Synchrotron radiation (5)
- Transesterification (5)
- Tribology (5)
- Waveguide (5)
- Wear (5)
- X-ray (5)
- nPSize (5)
- AISI 304L (4)
- Additive Manufacturing (4)
- Adhesive strength (4)
- Advanced materials (4)
- Affinity chromatography (4)
- Aging (4)
- Atomic Forc Microscopy (4)
- Bassanite (4)
- Bending modulus (4)
- Bio-SAXS (4)
- CUSP (4)
- Capillary waves (4)
- Cement hydration (4)
- Clustered nanoparticles (4)
- Cocrystals (4)
- Composites (4)
- Core-shell (4)
- Cosolute (4)
- Cryo milling (4)
- Crystal Engineering (4)
- Cycloalyphatic epoxy oligosiloxane (4)
- Data (4)
- Data stewardship (4)
- Degradation (4)
- Diaminopyridine (4)
- Direct laser writing (4)
- Discotic liquid crystals (4)
- EC4SafeNano (4)
- Early hydration (4)
- Ectoin (4)
- Epoxy nanocomposites (4)
- Exchange interaction (4)
- Ferromagnetism (4)
- GVP (4)
- Harmonisation (4)
- High Entropy Alloys (4)
- High entropy alloy (4)
- High entropy alloys (4)
- ISO/TC 229 (4)
- Image analysis (4)
- Image segmentation (4)
- Ionizing radiation damage (4)
- Iron (4)
- Knowledge Readiness Level (4)
- Korrosion (4)
- Landau Lifshitz equation (4)
- Lignin (4)
- Livermore model (4)
- Machine Learning (4)
- Magnetic moment (4)
- Magnetic nanoparticles (4)
- Material Acceleration Platforms (MAPs) (4)
- McSAS3 (4)
- Metal organic framework (4)
- Metal phosphonates (4)
- Metal-organic-frameworks (4)
- Microbeam Analysis (4)
- Microbeam analysis (4)
- Microwave synthesis (4)
- Milling (4)
- Modelling (4)
- Multi-sample analysis (4)
- NAP-XPS (4)
- NEXAFS (4)
- NTE (4)
- Nano (4)
- Nano@BAM (4)
- NanoDefine (4)
- Nanoelectronics (4)
- Nanofibers (4)
- Nanomaterial classification (4)
- Nanoparticle concentration (4)
- Non-destructive operando analysis (4)
- Normung (4)
- OER (4)
- OH radical scavenger (4)
- Oberflächenanalytik (4)
- Oberflächenmesstechnik (4)
- Object oriented micromagnetic framework (4)
- Particle (4)
- Particle scattering (4)
- Penelope model (4)
- Phase transition (4)
- Polycarbonate (4)
- Polyethylene (4)
- Polymorph (4)
- Polypropylene (4)
- Polyurethane (4)
- Potentiodynamic Polarization (4)
- Probennahme (4)
- Protein unfolding (4)
- Proton conductivity (4)
- Quality assurance (4)
- Quantification (4)
- Quantum dots (4)
- Raman spectroscopy (4)
- Reactive extrusion (4)
- Regulation (4)
- SIMS (4)
- Scanning Kelvin Probe Force Microscopy (4)
- SiO2 (4)
- Single-source precursors (4)
- Single-stranded DNA-binding proteins (4)
- Size distribution (4)
- Sol-gel (4)
- Spectroscopic Ellipsometry (4)
- Spectroscopic imaging ellipsometry (4)
- Spectroscopy (4)
- Stability (4)
- Stochastic Landau Lifshitz Gilbert equation (4)
- Surface modification (4)
- Thermoelectrics (4)
- Thermography (4)
- Thermogravimetrie (4)
- Thin Films (4)
- Titanium dioxide (4)
- Two-photon polymerization (4)
- VSSA (4)
- WAXS (4)
- X-ray absorption spectroscopy (4)
- X-ray emission (4)
- particle scattering (4)
- ssDNA (4)
- 2PP (3)
- 3D (3)
- 3D printing (3)
- Ab-initio (3)
- Absorption edge tomography (3)
- Adsorbed layer (3)
- Advanced calorimetry (3)
- Aluminium (3)
- Amphiphilicity (3)
- Analytik (3)
- Analytische Zentrifuge (3)
- Antibacterial (3)
- Antibodies (3)
- Aqueous Corrosion (3)
- Archaea (3)
- Artificial digestion (3)
- Atomic Force Microscopy (3)
- Atomistic models (3)
- Austenitic stainless steel (3)
- BAM reference data (3)
- Bacteria (3)
- BioSAXS (3)
- Biofilm formation (3)
- Biomaterials (3)
- Bonding strength (3)
- C-C coupling (3)
- Coating (3)
- Coordination polymers (3)
- Copolymer (3)
- Correlative analysis (3)
- Correlative imaging (3)
- Corrosion monitoring (3)
- Creep (3)
- Crosslinking (3)
- Data-fusion (3)
- Differential scanning calorimetry (3)
- Digital Infrastructure (3)
- Direct laser interference patterning (DLIP) (3)
- Dynamic light scattering (3)
- Dünne Schichten (3)
- Electrical conductivity (3)
- Electro catalyst (3)
- Electrochemical Impedance Spectroscopy (3)
- Electrospinning (3)
- Element-specific spectroscopy (3)
- Ellipsometrie (3)
- Energy dispersive X-ray spectroscopy (3)
- Environmental Simulation (3)
- European Centre (3)
- FTIR (3)
- Fast scanning calorimetry (3)
- Femtosecond laser processing (3)
- Framework (3)
- Free electron laser (3)
- Gas separation membranes (3)
- General Chemistry (3)
- General Materials Science (3)
- Growth Kinetics (3)
- Grüneisen parameter (3)
- H bonds (3)
- HF-shuttle (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- Hard-energy X-ray photoelectron spectroscopy (3)
- High-entropy alloy (3)
- Homogeneity (3)
- Hybrid metrology (3)
- ICP-MS (3)
- ISO (3)
- ISO/TC 229 Nanotechnologies (3)
- In situ Raman (3)
- In situ studies (3)
- In-situ (3)
- Industrial applications (3)
- Interatomic potentials (3)
- Interfaces (3)
- Intermodulation AFM (3)
- Interpenetrating polymer network (3)
- Interphase (3)
- Iridium oxide films (3)
- Iron oxide (3)
- Iron oxide nanoparticles (3)
- LC-MS (3)
- Laser-induzierte Röntgenstrahlung (3)
- Lead ions (3)
- Liquid chromatography (3)
- Luminescence (3)
- MAPz@BAM (3)
- Magnetostriktive Beschichtung (3)
- Materials Chemistry (3)
- Materials Design (3)
- Mechanical flexibility (3)
- Mesocrystal (3)
- Mesocrystals (3)
- Mesoporous materials (3)
- Metal organic frameworks (3)
- Method (3)
- Microplastics standardisation (3)
- Microprinting (3)
- Microscopy (3)
- Monte Carlo (3)
- Mueller-Matrix imaging ellipsometry (3)
- Nanoindentation (3)
- Nanosafety (3)
- Nanostructure quantification (3)
- Non-classical crystallization (3)
- Non-classical crystallization theory (3)
- OH Radical (3)
- OH radicals (3)
- Oberflächenenergie (3)
- Oberflächentechnik (3)
- PXRD (3)
- Phase transitions (3)
- Photooxidation (3)
- Polycarboxylate ether (PCE) (3)
- Polyester (3)
- Polymers with intrinsic microporosity (3)
- Proteins (3)
- Purification (3)
- Python (3)
- QHA (3)
- Qualitätssicherung (3)
- Quantum yield (3)
- ROS (3)
- Radical Scavenger (3)
- Radiotherapy (3)
- Reference Material (3)
- Reference procedures (3)
- Referenzdaten (3)
- Referenzmaterial (3)
- Resonance frequency (3)
- Rigidity (3)
- Ring opening polymerization (3)
- Round robin (3)
- Röntgenemission (3)
- SEM/EDS (3)
- Saxs (3)
- Scanning electron microscopy (3)
- Scattering pattern analysis (3)
- Secondary hazard (3)
- Self-assembly (3)
- Self-driving-labs (SDLs) (3)
- Simvastatin (3)
- Small-angle xray scattering (3)
- Solid-state (3)
- Spectroskopic Imaging (3)
- Stainless steel (3)
- Stand der Normung (3)
- Standards (3)
- Surface chemical analysis (3)
- TDEP (3)
- TGA (3)
- Thermal decomposition (3)
- Thermal degradation (3)
- Thermodynamics (3)
- Thermoelectric materials (3)
- Thin film metrology (3)
- Time resolved (3)
- Time-resolved scattering (3)
- Topas-MC (3)
- Topas-nBio (3)
- Toxicology (3)
- Transmission Kikuchi Diffraction (TKD) (3)
- Two-photon polymerisation (3)
- Ultrafast laser processing (3)
- Ultrakurzpulslaser (3)
- Ultrashort laser processing (3)
- Ultrashort pulse laser processing (3)
- Ultrashort pulsed laser (3)
- Uncertainty budgets (3)
- Verbundfestigkeit (3)
- White light interference microscopy (3)
- X-ray spectroscopy (3)
- Zentrifugentechnologie (3)
- Zinc oxide (3)
- Zirconium (3)
- ZrF4 (3)
- beta particle (3)
- nanoparticle (3)
- 2D materials (2)
- 3D Fourier Transform (2)
- ACEnano (2)
- ALD-Hybridprozesse (2)
- API (2)
- APTES (2)
- Ab initio simulation (2)
- Ab initio thermodynamics (2)
- Abschirmung (2)
- Acoustic levitation (2)
- Additive (2)
- Adhäsion (2)
- Advanced Materials (2)
- Al2O3-Schichten (2)
- Alkali-activated materials (2)
- Alkaline earth metal coordination polymers (2)
- Alloys (2)
- Amorphization (2)
- Amyloid (2)
- Analytic (2)
- Analytical methods (2)
- Anlagensicherheit (2)
- Anodization (2)
- Antibacterial properties (2)
- Atomic Layer Deposition (2)
- Au (2)
- Auge (2)
- Automated analysis (2)
- Automated image analysis (2)
- Automated workflows (2)
- Automatisation (2)
- Automatisierung (2)
- BAMline (2)
- BET (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Base damage (2)
- Base loss (2)
- Bauteilmonitoring (2)
- Beanspruchung auf Zug und Druck (2)
- Beta particle (2)
- Biocorrosion (2)
- Biofilm growth (2)
- Biofilmbildung (2)
- Bioinspiration (2)
- Bismuth (2)
- Boson peak (2)
- Brechungsindex (2)
- Building and Construction (2)
- C3A (2)
- C3A hydration (2)
- CAT-Technologie (2)
- CEN/TC 352 Nanotechnologies (2)
- Cancer (2)
- Case studies (2)
- Centrifugal Adhesion Testing (2)
- Ceramics and Composites (2)
- Certification (2)
- Characterisation (2)
- Characterization (2)
- Chemical Bonds (2)
- Chemical analysis (2)
- Chemical bonds (2)
- Chemically complex alloys (2)
- Classification (2)
- Coatings and Films (2)
- Cobalt (2)
- Complex oxides (2)
- Computational Materials Science (2)
- Computerchemie (2)
- Concentration (2)
- Convolutional neural networks (2)
- Correlative Imaging (2)
- Correlative ex-situ ellipsometric analysis (2)
- Corrosion inhibition (2)
- Cribellate spiders (2)
- Crystal (2)
- Crystal engineering (2)
- Crystals (2)
- DFT calculation (2)
- DLS (2)
- DNA radiation damage (2)
- DSC (2)
- Data Management (2)
- Data conversion (2)
- Data curation (2)
- Data fitting (2)
- Data organization (2)
- Delamination (2)
- Delayed addition (2)
- Density Functional Theory (2)
- Desintegracion radioactiva (2)
- Dielectric Spectroscopy (2)
- Diffusion (2)
- Digestion (2)
- Dipsersive XAS (2)
- Direct damage (2)
- Direct laser-interference patterning (DLIP) (2)
- Dispersive XAS (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Double-strand break (DSB) (2)
- Duplex stainless steel (2)
- Dynamic Light Scattering (2)
- EDX (2)
- EMPIR (2)
- EOS (2)
- ESEM (2)
- EU FP7 project NanoValid (2)
- Ectrocatalysis (2)
- Electrical properties (2)
- Electrolysis (2)
- Electrolyte membrane (2)
- Electromagnetic scattering (2)
- Electron Microscopy (2)
- Electron probe microanalysis (EPMA) (2)
- Electronic, Optical and Magnetic Materials (2)
- Elektronenmikroskopie (2)
- Ellipsometric operando investigation (2)
- Energetic Materials (2)
- Energy materials (2)
- Energy storage (2)
- Extended X-ray absorption fine structure (EXAFS) (2)
- FFT (2)
- Faser-Bragg Gitter (2)
- Fe3O4 (2)
- FeNi (2)
- FeNi-Oxide NPs (2)
- Film thickness (2)
- Finite-difference time-domain calculations (2)
- Fließmittel (2)
- Fluoride (2)
- Formaldehyde (2)
- Fourier Transform (2)
- Fourier transforms (2)
- Functional materials (2)
- Functionalization (2)
- GEXRF (2)
- GUM-compliance (2)
- Gene five protein (2)
- Generische Kenngrößen (2)
- Geothermie (2)
- Glutaraldehyde (2)
- Grafting (2)
- Graphene oxide flakes (2)
- Graphene powder (2)
- Graphene related 2D materials (2)
- Graphitization (2)
- Grazing exit (2)
- H2020 (2)
- HDF5 (2)
- HF (2)
- HPLC (2)
- Haftvermittler (2)
- Halloysite nanotubes (2)
- Hard x-ray photoelectron spectroscopy (2)
- Harmonisation in microplastics (2)
- High Pressure (2)
- High pressure (2)
- High resolution (2)
- High temperature corrosion (2)
- Holistic experimental procedures (2)
- Holistic science (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration shell (2)
- Hydrogen economy (2)
- Hydrogen evolution reaction (2)
- Hydroxyectoine (2)
- Hydroxyl radical (2)
- Hyperbranched (2)
- Härteprüfung (2)
- ICP-OES (2)
- IIT (2)
- IR (2)
- ISO 14577 (2)
- Imaging XPS (2)
- In situ PXRD (2)
- In-situ SAXS/WAXS (2)
- Indirect damage (2)
- Industrial and Manufacturing Engineering (2)
- Instrumented Indentation Testing (2)
- Instrumented indentation testing (2)
- Integrated Development Environment (2)
- Interlaboratory Comparisons (2)
- Ionic liquid (2)
- Ionization (2)
- Iridium-titanium mixed oxides (2)
- Kinetic (2)
- Kleb- und Haftfestigkeit (2)
- Knoevenagel condensation (2)
- LDX (2)
- Laboratory management (2)
- Lactide (2)
- Lanthanide (2)
- Large-scale processing (2)
- Large-scale production (2)
- Laser-induced periodic surface structures (2)
- Laser-induced x-ray emission (2)
- Laserschutz (2)
- Layer-by-layer deposition (2)
- Legierungen (2)
- Lifetime (2)
- Liquid Crystals (2)
- Liquid crystals (2)
- Localised corrosion (2)
- MALDI (2)
- MOF composite (2)
- Magnesium alloy (2)
- Magnetic nano-particles (2)
- Magneto-optischer Sensor (2)
- Mapping modifizierter Oberflächen (2)
- Mass spectrometry of polymers (2)
- Material design (2)
- Material processing (2)
- Material synthesis (2)
- Materialinformatik (2)
- Materials (2)
- Materials Properties (2)
- Materials Science (2)
- Materials science (2)
- Measurement data conversion (2)
- Mechanical property (2)
- Medizinische Anwendung (2)
- Mehr-Proben-Prüfung (2)
- Mehrprobenprüfung (2)
- Mesoporous (2)
- Mesoporous iridium oxides films (2)
- Mesoporous thin films (2)
- Messtechnik (2)
- Metadata schema (2)
- Metal fluorides (2)
- Metal-organic frameworks (2)
- Metals and Alloys (2)
- Metal–organic frameworks (2)
- Methane (2)
- Methodology in metrology (2)
- Methodology in testing (2)
- Micro- and nanoplastics (2)
- Microanalysis (2)
- Microbially induced corrosion (2)
- Microplastic analysis (2)
- Microporous structure (2)
- Mikroplastik-Massengehalte (2)
- Mikroskaliert (2)
- Mixed gas atmosphere (2)
- Molecular masses (2)
- Molecular mobility (2)
- Multi photon lithography (2)
- Multiphoton Lithography (2)
- Mussel-inspired adhesives (2)
- Método de Montecarlo (2)
- Müller-Matrix-Ellipsometrie (2)
- N-Chlorination (2)
- NXsas (2)
- Nano-safety (2)
- NanoSIMS (2)
- Nanocharacterisation (2)
- Nanomaterialien (2)
- Nanomechanics (2)
- Nanometrology (2)
- Nanopatricle (2)
- Nanorisk (2)
- Nanoskaliert (2)
- Nanostructure investigation (2)
- NeXus (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Neural networks (2)
- Neutron (2)
- Nickel (2)
- Niobium (2)
- Nitrides (2)
- Non-destructive testing (2)
- Non-spherical shape (2)
- Oberflächenfunktionalisierung (2)
- Oberflächengeometrie (2)
- Oberflächenprüftechnik (2)
- Organic Chemistry (2)
- Organic crystal (2)
- Osmolyte (2)
- Oxygen evolution reaction (OER) (2)
- PCA (2)
- Pair distribution function (2)
- Particle number concentration (2)
- Particle scattering simulation (2)
- Particle size and shape distribution (2)
- Passivation (2)
- Passive film (2)
- Phenolic compounds (2)
- Phosphorus (2)
- Photocuring (2)
- Physical aging (2)
- Physical and Theoretical Chemistry (2)
- Platform MaterialDigital (2)
- Platinum (2)
- Polyacrylamide (2)
- Polycarboxylate ether (2)
- Polycarboxylatether (2)
- Polyethylene Terephtalate (2)
- Polyethylene glycol (2)
- Polyglycolide (2)
- Polymer bilayer coatings (2)
- Polymer nanocomposites (2)
- Polymer of intrisic microporosity (2)
- Polymer-based nanocomposites (2)
- Polymorphs (2)
- Polynorbornenes (2)
- Porous materials (2)
- Postfluorination (2)
- Powder X-ray diffraction (2)
- Precipitation (2)
- Prehydrated electron (2)
- Proximatanalyse (2)
- Pump-probe experiments (2)
- Quality testing (2)
- Quasi-direct damage (2)
- Quasielastic neutron scattering (2)
- Quick-EXAFS (2)
- REACH (2)
- ROPPOC (2)
- Radiation (2)
- Radical (2)
- Radical scavenger (2)
- Radioactive nanoparticle (2)
- Reactive oxygen species (2)
- Reconstructed ion chromatograms (2)
- Recycling (2)
- Reductive amination (2)
- Referenzmaterialien (2)
- Reliability (2)
- Reverse Monte Carlo (RMC) (2)
- Rheologie (2)
- Rietveld (2)
- Ring-opening Polymerization (2)
- Robotics (2)
- Rosin (2)
- Round Robin (2)
- SANS (2)
- SEC (2)
- SOP (2)
- SZ2080 negative photo-resist (2)
- Sapphire (2)
- Sc-ICP-ToF-MS (2)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (2)
- Scanning kelvin probe force microscopy (2)
- Scicat (2)
- Secondary ion mass spectrometry (2)
- Sekundärstrahlung (2)
- Selbstkalibrierung (2)
- Selective oxidation (2)
- Self-organization (2)
- SiGe (2)
- Silane (2)
- Silica (2)
- Silica nanoparticles (2)
- Silver nanoparticle (2)
- Single cell analysis (2)
- Single crystal (2)
- Single-strand break (SSB) (2)
- SnO2 (2)
- Solid state NMR (2)
- Solubility (2)
- Starch (2)
- Starch nanoparticle (2)
- Structural anomalies (2)
- Structural inhomogenities (2)
- Structure prediction (2)
- Sulfates (2)
- Sulfidation (2)
- Surface (2)
- Surface Analysis (2)
- Surface analysis (2)
- Surface charge (2)
- Surface morphology (2)
- Surface oxidation (2)
- Sustainability (2)
- Synchrotron studies (2)
- Synchrotron tomography (2)
- Syngle Crystal alloy (2)
- TCO (2)
- TGA-FTIR (2)
- TGA-MS (2)
- TKD (2)
- TRIS (2)
- Technical lignin (2)
- Temeprature scaling (2)
- Temperature (2)
- Temperature scaling (2)
- Thermoanalytical methods (2)
- Thermoanalytik (2)
- Thermoplastics (2)
- Thermoresponsive polymers (2)
- Thickness (2)
- Ti6Al4V alloy (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Time-resolved (2)
- Tin acetates (2)
- Titania (2)
- Titanium (2)
- Titanium alloy (2)
- Toxicity (2)
- Transparent Conductive Oxides (2)
- Trinkwasser (2)
- Twinning (2)
- Two-dimensional chromatography (2D-LC) (2)
- UV degradation (2)
- UV radiation (2)
- Ultra thin polymer films (2)
- Ultra-short pulse laser processing (2)
- Ultrakurze Laserimpulse (2)
- Uncertainties (2)
- Upconversion (2)
- Vesicles (2)
- Virus inhibition (2)
- Waschmaschine (2)
- Washing machine (2)
- Wasseraufbereitung (2)
- Water/alcohol mixtures (2)
- Workflow (2)
- X-ray Photoelectron Spectroscopy (2)
- X-ray and electron diffraction (2)
- X-ray refraction (2)
- XAFS (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- ZIF (2)
- Zahn (2)
- Zementleim (2)
- Zeolitic imidazolate framework (2)
- Zersetzungsgasanalyse (2)
- Zeta potential (2)
- ZnO nanopillars (2)
- low energy electrons (2)
- nanoparticula (2)
- 1,2,3-triazole (1)
- 1H-NMR (1)
- 2,6-diaminopyridine (1)
- 29Si (1)
- 2D (1)
- 2D Materials (1)
- 2D chromatography (1)
- 2D flakes (1)
- 2D nanomaterial (1)
- 3D FFT (1)
- 3D coherence scanning interferometry (CSI) (1)
- 3D-printing (1)
- 3d structuring (1)
- 5-hydroxynicotinic acid (1)
- 60-230V (1)
- 89Y MAS-NMR (1)
- A4F (1)
- AEMFC (1)
- AEROSIL® OX50 (1)
- AET (1)
- AFM force spectroscopy (1)
- AFM-IR (1)
- AI tool (1)
- ALD-Beschichtung (1)
- ASTM (1)
- ATZ (1)
- AZ31 (1)
- Aantimicrobial (1)
- Ab initio Simulation (1)
- Ab initio calculations (1)
- Abbildende Ellipsometrie (IE) (1)
- Ablation (1)
- Absorption edge (1)
- Absorption spectrometry (1)
- Abwasser (1)
- Accreditation (1)
- Acid corrosion (1)
- Acid resistance (1)
- Additiv (1)
- Additives (1)
- Adhesion (1)
- Adhesion by mechanical interlocking (1)
- Adhesive ALD interlayer (1)
- Adhesive strength determination (1)
- Adhesives (1)
- Adhesives - Determination (1)
- Admixtures (1)
- Advanced Oxidation (1)
- Advanced material (1)
- Advanced optics (1)
- Advanced ultrashort-laser technology (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag (1)
- Aged particles (1)
- Ageing (1)
- Aggregation (1)
- Air fragmentation (1)
- Al-based alloy (1)
- Al2O3 thin films (1)
- AlOOH (1)
- Algorithm (1)
- Alite (1)
- Alkaline brines (1)
- Alkaline earth metal (1)
- Alkoxysilanes (1)
- Alloy (1)
- Alloy 31 (1)
- Alpha (1)
- Alpha-tricalcium phosphate (1)
- Alternating co-poly(ether pyridine)s (1)
- Alumina (1)
- Alumina toughened zirconia (1)
- Aluminium alloy (1)
- Aluminium fluorides (1)
- Aluminium oxide hydroxide (1)
- Aluminium teflates (1)
- Aluminum alloys (1)
- Aluminum oxide (1)
- Amino acid analysis (1)
- Amorphous calcium sulfate (1)
- Amorphous materials (1)
- Amperometry (1)
- Analyses (1)
- Analysis approach (1)
- Analysis area measurements (1)
- Analytical Chemistry (1)
- Analytical services (1)
- Analytical techniques (1)
- Anatase (1)
- Anharmonicity (1)
- Annealing (1)
- Anthracene schiff base (1)
- Antiadhesive surfaces (1)
- Antibacterial surfaces (1)
- Antibakterielle Oberflächen (1)
- Antibody Purification (1)
- Antibody purification (1)
- Anticancer (1)
- Antifouling (1)
- Antifouling surface coatings (1)
- Antifriction coefficient (1)
- Antikensammlung Berlin (1)
- Antiviral activity (1)
- Anwendung von Kohlenstoffschichten (1)
- Application (1)
- Application properties (1)
- Aqueous synthesis (1)
- Arbitrary shapes (1)
- Argon gas cluster ion sputtering (1)
- Aromatic (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Aromatic organic compounds, (1)
- Aromatic pollutants (1)
- Artefact (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Artificial Intelligence (AI) (1)
- Artificial intelligence (1)
- Artificial neural network modelling (1)
- Artificial weathering (1)
- Atom probe tomography (1)
- Atomic and Molecular Physics and Optics (1)
- Atomic fraction (1)
- Au Nanoparticles (1)
- Au nanoparticles (1)
- Au-nanocubes (1)
- Au/Ag nanoparticles, (1)
- Augenbohne (1)
- Auger Electron Spectroscopy (1)
- Auger electron spectroscopy (1)
- Austenitic steel (1)
- Automated Image Analysis (1)
- Automated Purification (1)
- BADGER film (1)
- BAM Academy (1)
- BESSY (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial lipopolysaccharides (1)
- BadgerFilm (1)
- Ball milling (1)
- Band gap (1)
- Bbeverages (1)
- Beamline (1)
- Benchmarking (1)
- Bending mechanism (1)
- Berliner Tuffsteinfassaden (1)
- Beschichtung (1)
- Bessel-Strahlen (1)
- Bessel-beam laser dicing (1)
- Bestimmung der Messunsicherheit (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bifunctionality (1)
- Bimetallic frameworks (1)
- Bimetallic noble metal nanoparticles (1)
- Bimodal (1)
- Bimodal size distribution (1)
- Binary zinc alloys (1)
- Binder Jetting (1)
- Bio-ceramic engineering (1)
- Bioabbaubare Polymere (1)
- Biobased (1)
- Biocomposite (1)
- Bioconjugation (1)
- Biodegradable polymers (1)
- Biofilm quantification (1)
- Biofilme (1)
- Biofilms (1)
- Biofunctional Molecules (1)
- Biogene Schwefelsäurekorrosion (1)
- Biogenic acid corrosion (1)
- Biological & biomedical applications (1)
- Biologische Anwendungen (1)
- Biomarker (1)
- Biomedical application (1)
- Biomedizin (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomimicry (1)
- Bionic materials (1)
- Biopolymers (1)
- Bioresorbable Biomaterials (1)
- Bioseparation (1)
- Biosourced isosorbide (1)
- Bipyramid (1)
- Bismuth Ferrite (1)
- Bismuth titanates (1)
- Bisphenol A (1)
- Black phosphorus (1)
- Bloch wall (1)
- Blockcopolymer (1)
- Boehmite alumina (1)
- Boehmite nanoparticles (1)
- Bonds (1)
- Bone screws (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Borosilicate Glass (1)
- Bovine serum albumin (1)
- Bragg peak (1)
- Brilliant Blue R (1)
- Broadband Dielectric Spectrscopy (1)
- Broadband dielectric microscopy (1)
- Brunauer-Emmett-Teller (1)
- Bulk material (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Bundesoberbehörden (1)
- Buried interfaces (1)
- Bystander effect (1)
- Böhmit (1)
- C++ (1)
- C-F activation (1)
- C3S (1)
- C7H15N2O4P (1)
- CALPHAD (1)
- CAT (1)
- CAT – Technology (1)
- CAT-technology (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CEN (1)
- CEO (1)
- CO2 (1)
- COK-12 (1)
- Cadmium and lead remediation (1)
- Calamistrum (1)
- Calcium monofluoride (1)
- Calcium silicate hydrate (1)
- Calibration (1)
- Calibration structure (1)
- Caloric effects (1)
- Calorimetry (1)
- Cancer therapy (1)
- Cancer therapy (1)
- Capillary electrophoresis (1)
- Carbon Nanomembranes (1)
- Carbon dioxide reduction (1)
- Carbon fibers (1)
- Carbon ions (1)
- Carbon materials (1)
- Carbon nanoparticles (1)
- Carbon storage (1)
- Carboxyl group (1)
- Carboxylative cyclization of propargyl alcohols (1)
- Carrier (1)
- Carrier protein (1)
- Cassical nucleation theory (1)
- Catalogue of Services (CoS) (1)
- Catalogue of services (1)
- Catalyst layer (1)
- Catalytic fixation of carbon dioxide (1)
- Catechol (1)
- Cationic photocuring (1)
- Causes leading to scientific misconduct (1)
- CdS (1)
- Ce0.1Zr0.9O2 nanoparticles (1)
- Ce0.25Zr0.75O2 nanoparticles (1)
- Ce0.5Zr0.5O2 nanoparticles (1)
- Ce0.75Zr0.25O2 nanoparticles (1)
- Ce0.9Zr0.1O2 (1)
- CeO2 nanoparticles (1)
- CeO2/Co3O4 (1)
- Cell (1)
- Cell appendages (1)
- Cell imaging (1)
- Cell size (1)
- Cell-envelope (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Cellulose acetate (1)
- Cellulose nanofibrils (1)
- Cement admixtures (1)
- Centrifugal Adhesion Testing (CAT) Technologie (1)
- Centrifugal Force (1)
- Centrifugal adhesion testing (1)
- Centrifugal adhesion testing (CAT) (1)
- Ceramic matrix composites (1)
- Ceramic microprinting (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Ceria (1)
- Cerium oxide (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Certified standards (1)
- Channel access (1)
- Characterization method (1)
- Charge (1)
- Charge-to-size-ratio (1)
- Chemical Bonding (1)
- Chemical Understanding (1)
- Chemical analyses (1)
- Chemical bonding (1)
- Chemical composition (1)
- Chemical heuristics (1)
- Cheminformatics (1)
- Chemisorption (1)
- Chemistry (1)
- Chemometric analysis (1)
- Chemputer (1)
- Chromatography (HIC) (1)
- Citizen Science (1)
- Clean energy technology (1)
- Clerodin (1)
- Cluster (1)
- Cmake (1)
- Co (1)
- Co-crystal (1)
- Co0.75Fe2.25O4 nanoparticles (1)
- Co1.5Fe1.5O4 nanoparticles (1)
- Co2.25Fe0.75O4 nanoparticles (1)
- Co3O4 nanoparticles (1)
- Coaggregation (1)
- Coating materials (1)
- Coatings (1)
- Cobalt (III) Schiff base complex (1)
- Cobalt and zinc oxides (1)
- Coherent exchange (1)
- Column holder (1)
- Columnar Liquid Crystal (1)
- Columnar Liquid Crystals (1)
- Columnar liquid crystals (1)
- Combinatorial peptide library (1)
- Combined corrosive and mechanical load (1)
- Combined sewer system (1)
- Command line (1)
- Command-line interface (1)
- Commercialization (1)
- Comparability (1)
- Comparability of Measurement Results (1)
- Comparative test (1)
- Compatible solute (1)
- Complementary methodology and metrology (1)
- Complex (1)
- Complex Molecular Systems (1)
- Complex-shape (1)
- Composite materials (1)
- Composite strength (1)
- Compositional complex alloys (1)
- Compositionally complex alloys (1)
- Compound semiconductors (1)
- Compound strength (1)
- Compressive Stress (1)
- Computational chemistry (1)
- Computations (1)
- Computed tomography (1)
- Computer Science Applications (1)
- Computergestützte Materialwissenschaft (1)
- Computertomographie (1)
- Concentration step (1)
- Condensed Matter Physics (1)
- Conditioning layer (1)
- Conference (1)
- Confined Columnar Liquid Crystals (1)
- Confocal microscopy (1)
- Confocal raman imaging (1)
- Conservation (1)
- Construction (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Conversion (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolymerization (1)
- Copper (1)
- Coprecipitation (1)
- Core-clusters (1)
- Core-shell nanoparticle (1)
- Core-shell nanoparticle (CSNP) (1)
- Core-shell nanoparticles (1)
- Core-shell structures (1)
- Core–shell particles (1)
- Correlative Spectroscopy (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- Corrosion testing (1)
- Corundum (1)
- Coupled corrosive and mechanial load (1)
- Coupled corrosive/mechanical load (1)
- Covalend functionalization (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- CrMnFeCoNi (1)
- Cristobalite frameworks (1)
- Cross-sectioning (1)
- Crosslinking density (1)
- Croyo-starage (1)
- Cryo-TEM (1)
- Crystal Engeneering (1)
- Crystal Orbital Hamilton Populations (1)
- Crystal growth (1)
- Crystal structure (1)
- Crystallinity (1)
- Crystallization sequence (1)
- Crystalstructure (1)
- Cu catalysts (1)
- CuNPs (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cultural heritage (1)
- Curie temperature (1)
- Curing (1)
- Curve fitting (1)
- Curved surfaces (1)
- Cycles (1)
- Cyclic (1)
- Cyclic Voltammetry (1)
- Cyclic voltammetry (1)
- Cyclisation (1)
- Cycloaddition (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cycloparaphenylenes (1)
- Cytoskeleton mimic (1)
- D7755-11 (1)
- DFT calculations (1)
- DFT calculations of Raman spectra (1)
- DIN 50989 Parts 1 – 6 (1)
- DIN EN 15870 (1)
- DIN EN ISO/IEC 17025 (1)
- DIN EN ISO/IEC 17025:2018 (1)
- DMSO (1)
- DNA-Binding protein (1)
- DOPO (1)
- DRIFTS (1)
- DSB (1)
- DSS (1)
- DTAB (1)
- Damping factor (1)
- Data Analysis (1)
- Data analysis round robin (1)
- Data catalog (1)
- Data corrections (1)
- Data correlation (1)
- Data fusion (1)
- Data management (1)
- Data manipulation (1)
- Data pipelines (1)
- Data processing (1)
- Data provenance (1)
- Data readiness level (1)
- Data stewartship (1)
- Databases (1)
- Datasets (1)
- Debian (1)
- Debye scattering equation (1)
- Decision support (1)
- Decorative coatings on polymer substrates (1)
- Defect Analysis (1)
- Definition (1)
- Definition of nanomaterial (1)
- Deformation (1)
- Degradation mechanisms (1)
- Degradation of polyethylene (1)
- Degradation signatures (1)
- Degradation studies (1)
- Deliberate particle implementation (1)
- Demonstration (1)
- Dendrimer (1)
- Dendritic amphiphile (1)
- Dendritic polyglycerol (1)
- Density separation (1)
- Density-based Model (1)
- Density-functional theory (1)
- Dentistry (1)
- Depolarization contrast imaging (DCI) (1)
- Depollution (1)
- Depth profiling (1)
- Depth resolved XANES (1)
- Detektion von Mikroplastik (1)
- Diagnostic Antibodies (1)
- Diffusion multiples (1)
- Diffusion/diffusivity (1)
- Diffusons (1)
- Digital laboratory (1)
- Digitalization (1)
- Digitization (1)
- Dimorphs (1)
- Direct Laser Writing (1)
- Direct fluorine-metal bond (1)
- Direct laser interference patterning (1)
- Disorder (1)
- Dispersion of nano materials (1)
- Dispersive-XAS (1)
- Distribution of nanoparticles (1)
- Dodecanethiol (1)
- Domain wall (1)
- Doped ZnO nanostructures (1)
- Dose (1)
- Dosimetrie (1)
- Double complex compound (1)
- Double complex salts (1)
- Down Stream Processing (1)
- Downstream processing (1)
- Dry DNA (1)
- Drywood termite (1)
- Duplex stainless steels (1)
- Dye (1)
- Dynamic behavior (1)
- Dynamic heterogeneity (1)
- Dynamic testing (1)
- Dynamic vapor sorption (1)
- E. coli (1)
- EDS-TM002 (1)
- EIS (1)
- ELISA (1)
- EMPIR nPSize (1)
- EN 15870 (1)
- EPICS (1)
- EPMA (Electron Probe Microanalysis) (1)
- ESCA (1)
- ESI-TOF-MS (1)
- ESR (1)
- EU (1)
- Earthworms (1)
- Ectoine hydration (1)
- Editorial (1)
- Education (1)
- Elastic Crystal (1)
- Elastic membrane (1)
- Elasticity (1)
- Electric Safety Interlock (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical thin layers (1)
- Electro catalytic water splitting (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical CO2 conversion (1)
- Electrochemical Empedance Spectroscopy (EIS) (1)
- Electrochemical catalysts (1)
- Electrochemical deposition (ECD) (1)
- Electrochemical sensing (1)
- Electrochemical treatment (1)
- Electrode materials (1)
- Electrodes (1)
- Electrohpresis (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron Probe Microanalysis (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron density map (1)
- Electron probe X-ray microanalysis (EPMA) (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (1)
- Electron tomography (1)
- Electronic (1)
- Electronic structure (1)
- Electrons (1)
- Electrophoresis (1)
- Electrospun fibers (1)
- Electrospun nanocomposite fiber (1)
- Elektrolyse (1)
- Ellipsometric metrology (1)
- Ellipsometric porosimetry (1)
- Encapsulation (1)
- Energiedissipation im Kontakt (1)
- Energy (1)
- Energy input (1)
- Energy production (1)
- Energy systems (1)
- Enthalpy of solution (1)
- Enthalpy of sublimation (1)
- Environmental Chemistry (1)
- Environmental impacts (1)
- Epitaxy (1)
- Epoxi nanocomposites (1)
- Epoxide (1)
- Epoxy conversion degree (1)
- Epoxy-Anhydrid Duroplast (1)
- Escherichia coli (1)
- Estrogenic activity of plastic nanoparticles (1)
- Ettringen tuff (1)
- Eu (1)
- European funding strategies (1)
- Europium (1)
- Eutectic (1)
- Evaporation (1)
- Evaporite deposits (1)
- Ex-situ (1)
- Excess surface work (1)
- Exchange length (1)
- Exposed metal sites (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extrusion (1)
- F pili (1)
- FAIR (1)
- FAIRification (1)
- FLASH effect (1)
- FPLC (1)
- FT-IR (1)
- FTIR spectroscopy (1)
- Fabrication parameters (1)
- Facilitated activation (1)
- Failure pattern (1)
- Faser-Bragg-Gitter (FBG) (1)
- Fast scanning calorimeter (1)
- Fast scanning calormetry (1)
- Fatigue (1)
- Fe (1)
- Fe-Ni (1)
- Fe2O3 nanoparticles (1)
- FeNi nanoparticles (1)
- FeNi thin film (1)
- Femtosecond (1)
- Femtosecond Laser (1)
- Femtosecond laser-processing (1)
- Femtosekundenlaser (1)
- Fermi resonance (1)
- Ferrihydrite (1)
- Ferroelectric (1)
- Ferroelectricity/ferroelectric materials (1)
- Fexible crystals (1)
- Fiber Bragg grating (FBG) (1)
- Fiber toxicology (1)
- Fibers of textile origin (1)
- Fibre release (1)
- Field of View (1)
- Filled rubbers (1)
- Filled thermosets and plastics (1)
- Filter (1)
- Filter crucible (1)
- Filters (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Fityk (1)
- Flame retardant (1)
- Flexible (1)
- Flexible waveguide (1)
- Flexural rigidity (1)
- Flow system (1)
- Flow-System (1)
- Fluid-flow (1)
- Fluorides (1)
- Fluorinated MOFs (1)
- Fluorine Interaction (1)
- Fluorine coordination (1)
- Fluorine coordination polymers (1)
- Foaming (1)
- Food Science (1)
- Force distance curve (1)
- Force microscopy (1)
- Force-distance-curve (1)
- Forschungsstrategie (1)
- Fraktionierte Filtration (1)
- Free electron laser (FEL) (1)
- Fuel sorption (1)
- Fuell cells (1)
- Fullerene (1)
- Fully aromatic frameworks (1)
- Functional coatings (1)
- Functional properties (1)
- Functionality type distribution (1)
- Functionalized nanographene (1)
- Funktionelle Beschichtungen (1)
- Galvanotechnik (1)
- Gamma (1)
- Gamma ray (1)
- Gandolfi method (1)
- Gas flow assisted powder deposition (1)
- Gas monitoring (1)
- Gas sensors (1)
- Gas separation (1)
- Gas sorption (1)
- Gas transport (1)
- Gastrointestinal barrier (1)
- Gekrümmte Oberflächen (1)
- Gel (1)
- Gel electrolytes (1)
- General Energy (1)
- General Environmental Science (1)
- General Medicine (1)
- General Physics and Astronomy (1)
- Generator (1)
- Geology (1)
- Geothermal (1)
- Geringe Partikelfrachten (1)
- Ggraphene polymer nanocomposite (1)
- Git (1)
- Gitterfehlpassung (1)
- Glass Support (1)
- Glass powder (1)
- Glass transition temperature (1)
- Glass-ceramic (1)
- Glasses (1)
- Glassy Dynamics (1)
- Glassy polymer (1)
- Glassy polynorbornenes (1)
- Gleitlinien (1)
- Glow-discharge optical emission spectroscopy (1)
- Glucose (1)
- Glue (1)
- Glycolide (1)
- Gold Nanoparticle (1)
- Gold mit Synchrotronstrahlung (1)
- Governance (1)
- Gradient elution (1)
- Grain boundary engineering (1)
- Graphen Oxide (1)
- Graphene Oxide (1)
- Graphene funcionalisation (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene polymer nanocomposite (1)
- Graphene related materials (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphite furnace (1)
- Graphs (1)
- Grating (1)
- Grazin exit XANES (1)
- Greek curse tablets (1)
- Green Chemistry (1)
- Grenzfläche als Material (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Guideline (1)
- Gypsum' SAXS (1)
- H-bonds (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HEA (1)
- HERFD-XAS (1)
- HR-CS-MAS (1)
- HV cable accessories (1)
- Halide Perovskites (1)
- Halogen bond (1)
- Halogen bond interaction (1)
- Hamonisierung (1)
- Hard X-ray photoelectron spectroscopy (1)
- Hard magnetic materials (1)
- Hard magnets (1)
- Heat diffusion (1)
- Heating oil tanks (1)
- Heavy metals (1)
- Hematite (1)
- Hexafluorobenzen (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High Resolution (1)
- High density polyethylene (1)
- High specific surface area (1)
- High-Speed Separations (1)
- High-density polyethylene (1)
- High-pressure high-temperature (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-repetition rate ultrafast laser processing (1)
- High-resolution (1)
- High-resolution transmission electron microscopy (1)
- High-temperature fuel cells (1)
- High-throughput measurements (1)
- Highly permeable polynorbornenes (1)
- Highly permeably polynorbornenes (1)
- History (1)
- Hochdurchsatz (1)
- Hochentropie-Legierung (1)
- Holistic experiment approaches (1)
- Holzschutzmittel (1)
- Homogeneous deposition (1)
- Homogenization (1)
- Host–guest systems (1)
- Hot steam (1)
- Human Plasma (1)
- Human factor (1)
- Human influence (1)
- Human plasma (1)
- Human umbilical cell adhesion (1)
- Humidity (1)
- Hybrid metrology measurement (1)
- Hydantoin (1)
- Hydration (1)
- Hydrochemical evolution (1)
- Hydrodynamics (1)
- Hydrofluorination (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Generation (1)
- Hydrogen Storage (1)
- Hydrogen assisted cracking (1)
- Hydrogen storage (1)
- Hydrogenated nanostructures (1)
- Hydrophobic interaction (1)
- Hydrophobic interaction chromatography (1)
- Hydrophobicity (1)
- Hydrothermal synthesis (1)
- Hyperbranched polymer (1)
- Hyperspectral imaging (1)
- Härte (1)
- Härteverlauf Schweißnaht (1)
- ILC on detection methods (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- ISO 21363 (1)
- ISO 23131: 2021 (1)
- ISO/TC 201 (1)
- ISO/TC 202 Microbeam Analysis (1)
- ISO/TC229 (1)
- ISOGScope (1)
- Identification (1)
- IgG determination (1)
- Igg (1)
- ImAFM (1)
- Image Segmentation (1)
- Image manipulation (1)
- Images (1)
- Imaging Ellipsometry (1)
- Imaging ellipsometry (1)
- Imaging ellipsometry(IE) (1)
- Imaging modifizierter Oberflächen (1)
- Imaging surface chemical analysis (1)
- Imaging techniques (1)
- Immunoassay (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Impact Sensitivity (1)
- Implant material (1)
- In Situ (1)
- In situ AFM (1)
- In situ Atomic Force Microscopy (AFM) (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ XRD (1)
- In situ atomic force microscopy (1)
- In situ coupling (1)
- In situ diffraction (1)
- In-Situ Characterization (1)
- In-Situ Techniques (1)
- In-situ analysis (1)
- In-situ scattering (1)
- Incipient plasticity (1)
- Indenter area function (1)
- Indium (1)
- Industrial application (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Inelastic background (1)
- Inelastic neutron scattering (1)
- Information Systems (1)
- Infrared nano AFM (1)
- Instrument automation (1)
- Instrument compliance (1)
- Instrument control (1)
- Instrumentation utilization (1)
- Instrumented Indentation (IIT) (1)
- Instrumented Indentation Testing (IIT) (1)
- Instrumentierte Eindringprüfung (1)
- Instrumentierte Eindringprüfung (IIT) (1)
- Insulators (1)
- Inter-lab comparison (1)
- Inter-laborator comparison (1)
- Inter-laboratory comparisons (1)
- Intercomparability (1)
- Interfacial stability (1)
- Interlaboratory Comparison (1)
- Interlaboratory comparability (1)
- Interlaboratory comparision (1)
- Interlaboratory comparisons (1)
- Intermediate phases (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Interpenetrating polymer networks (1)
- Intrinsic OER activity (1)
- Intrinsically conducting polymers (1)
- Iodine (1)
- Ion beam implantation (1)
- Ion beam therapy (1)
- Ion implantation (1)
- Ionic liquid crystal (1)
- Ionic liquid crystalls (1)
- Ionic liquid crystals (1)
- Ionisation (1)
- Iridium compounds (1)
- Iridium oxide (1)
- Iron carbide (1)
- Iron nanoparticles (1)
- Iron nanophases (1)
- Iron nitride (1)
- Iron oxide films (1)
- Iron reducing bacteria (1)
- Irreversible adsorption (1)
- Isosorbide (1)
- Janus dendrimers (1)
- K-nearest neighbor (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kalottenverfahren (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Katalysator (1)
- Keggin Cluster (1)
- Kelvinsondenkraftmikroskopie (1)
- Kinetics from experiments (1)
- Klassifizierung von Kohlenstoffschichten (1)
- Klebfestigkeit von Stumpfklebungen (1)
- Kleine Partikel (1)
- Knoevenagel (1)
- Knowledge (1)
- Knufia petricola (1)
- Kombinierete korrosive und mechanische Beanspruchung (1)
- Kompaktierbarkeit (1)
- Kompressibilität (1)
- Korrosionsüberwachung (1)
- Kriechversuche (1)
- Kunststoff (1)
- Künstliche Intelligenz (1)
- L-lactide (1)
- LC / MALDI-TOF-MS coupling (1)
- LC x ESI-TOF-MS (1)
- LCCC (1)
- LET (1)
- LEVASIL 50/50 (1)
- LIPSS (1)
- LL equation (1)
- Laboratory automation (1)
- Laboratory methodology (1)
- Laborvergleich Härte (1)
- Lacunary Keggin ion (1)
- Landau Lifshitz Gilbert equation (1)
- Landau de-Gennes analysis (1)
- Lanthanide(III) (1)
- Lanthanides (1)
- Lanthanides doped coordination polymers (1)
- Lanthanoide (1)
- Large number of participants (1)
- Large volume samplers (1)
- Large-pore (1)
- Large-scale synthesis (1)
- Laser (1)
- Laser Machining (1)
- Laser cleaning (1)
- Laser damage (1)
- Laser diffraction (1)
- Laser direct writing (1)
- Laser micromachining (1)
- Laser nanostructuring (1)
- Laser technology (1)
- Laser writing (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Laser-modified surface (1)
- Lasermaterialbearbeitung (1)
- Lasermikrobearbeitung (1)
- Lasersicherheit (1)
- Lateral resolution (1)
- Lattice enthalpy (1)
- Lattice misfit (1)
- Layer Materials (1)
- Layer-by-Layer (1)
- Lead isotopes (1)
- Lead-free ceramics (1)
- Leichtbau (1)
- Levitation (1)
- Lewis Acid (1)
- Lewis superacids (1)
- Library and Information Sciences (1)
- Lifetime analysis (1)
- Ligand exchange (1)
- Ligandsubstitution (1)
- Lignin modification (1)
- Lignosulfonate (1)
- Lignosulfonates (1)
- Linear polyglycerol (1)
- Linker (1)
- Linux (1)
- Liquid Crystal (1)
- Liquid spattering (1)
- Liquid-liquid-phase-separation (1)
- Literature survey (1)
- Lithium-ion battery (1)
- Lithium-sulfur battery (1)
- Local corrosion (1)
- Local structure (1)
- Localized surface plasmon resonance (1)
- Lokale Korrosion (1)
- Lonic liquid (1)
- Loss module (1)
- Low-contrast surface modifications (1)
- Lubricant additives (1)
- Luminescent lifetime (1)
- Luminescent materials (1)
- MALDI-TOF mass spectrometry (1)
- MAPbI3 perovskites (1)
- MCC (1)
- MCNP (1)
- MOF-74 (1)
- MOF´s (1)
- MPI (1)
- MPLS (1)
- MRT (1)
- MWCNT (1)
- Machining (1)
- Macrocycles (1)
- Magic-sized cluster (1)
- Magnesium alloys (1)
- Magnet coupling (1)
- Magnetic Nanoparticles (1)
- Magnetic anisotropy (1)
- Magnetic hyperthermia (1)
- Magnetic interacion (1)
- Magnetic nanoparticle (1)
- Magnetic swimmers (1)
- Magnetization dynamics (1)
- Magneto-optical coupling (MOC) (1)
- Magnetocoloric (1)
- Magnetoeleastic couplin (1)
- Magnetpartikel (1)
- Martensite (1)
- Martin Seah (1)
- Mass contents (1)
- Material Science (1)
- Material characterization (1)
- Material chemistry (1)
- Material defects (1)
- Material science (1)
- Material selection (1)
- Material-binding Peptides (1)
- Materialdesign (1)
- Materials Stability (1)
- Materials Understanding (1)
- Materials acceleration platforms (MAPs) (1)
- Materials informatics (1)
- Matter reorganization theories (1)
- Me-TiO2 (1)
- Measurement (1)
- Measurement methodology (1)
- Measurement science (1)
- Measurement uncertainty (1)
- Mechanical Properties (1)
- Mechanical Sensitivity (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical characterization (1)
- Mechanical response (1)
- Mechanical testing (1)
- Mechanically flexible crystals (1)
- Mechanically flexible molecular crystals (1)
- Mechanism (1)
- Mechanochemical oxidation (1)
- Mechanochemical pictographs (1)
- Mechanochemical syntheses (1)
- Mechanochemical synthesis (1)
- Mechanochemictry (1)
- Mechanochemie (1)
- Mechanophotonics (1)
- Median lethal energy deposit (1)
- Medical implants (1)
- Medium entropy alloy (1)
- Medizintechnik (1)
- Mehr-Proben-Prüfverfahren (1)
- Melting (1)
- Membrane (1)
- Membrane polymers (1)
- Membranes (1)
- Mesoporous Materials (1)
- Mesoporous Silica (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Mesoporous oxide materials (1)
- Mesoporous phosphate-based glasses (1)
- Messunsicherheit (1)
- Metadata (1)
- Metadata collection (1)
- Metadata structuring (1)
- Metal Organic Frameworks (1)
- Metal and alloys (1)
- Metal carbides (1)
- Metal coatings (1)
- Metal nanoparicels (1)
- Metal oxides (1)
- Metal reducing bacteria (1)
- Metal-organic frameworks (MOFs) (1)
- Metal-organic polyhedra (1)
- Metal-oxides (1)
- Metal-semiconductor (1)
- Metallographie (1)
- Metallschichten (1)
- Metals (1)
- Metal−organic frameworks (1)
- Methanogen (1)
- Method development (1)
- Method validation (1)
- Methoxytrimethlsilane (1)
- Methyl group rotation (1)
- Metrics (1)
- Metrology in Chemistry and Biology (1)
- Mg alloys (1)
- Micelle (1)
- Micro- and Nanoplastics (1)
- Microarray printing (1)
- Microbial (1)
- Microbial adhesions (1)
- Microbial induced corrosion (1)
- Microbiological Corrosion (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microcracks (1)
- Microdroplet (1)
- Microencapsulation (1)
- Microfabrication (1)
- Microfluidic (1)
- Microfluidics (1)
- Micromanipulation (1)
- Micropatterned dry adhesive (1)
- Microplastic fibre release (1)
- Microplastic mass (1)
- Microplastic mass contents (1)
- Microplastic particles (1)
- Microplastic pathways (1)
- Microplastic pollution (1)
- Microplastic reference materials (1)
- Microplastics detection (1)
- Microplastics in milk (1)
- Microplastics in soil (1)
- Microplastics reference material (1)
- Microplastics sampling (1)
- Microporous polymers (1)
- Microstructure Design (1)
- Microstructure-property relations (1)
- Mikroplasik (1)
- Mikroplastik Böden (1)
- Mikroplastik in Luft (1)
- Mikroplastik-Analyse (1)
- Mikroplastikreferenzmaterial (1)
- Mikrostrukturen (1)
- Mild steel (1)
- Minerals (1)
- Mitochondria (1)
- Mixed Matrix Membrane (1)
- Mixed Oxides (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Mixed-linkers (1)
- MoO3 (1)
- Modeling (1)
- Modification (1)
- Modulus (1)
- Moisture (1)
- Molar mass distribution (1)
- Molecular Conformation (1)
- Molecular Dynamics (1)
- Molecular Mobility (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular mass distribution (1)
- Molecular recognition (1)
- Molybdenum (1)
- Monitoring (1)
- Monoclonal Antibodies (1)
- Monolith (1)
- Monte carlo (1)
- Monte-Carlo (1)
- Monte-Carlo Simulationen (1)
- Monte-Carlo Simulations (1)
- Morpho-chemical characterization (1)
- Morphogenesis (1)
- Morphology (1)
- Morphology control (1)
- Motor controller (1)
- Mueller-Matrix Ellipsometry (1)
- Multi-core particles (1)
- Multi-functional coatings for sensors (1)
- Multi-method analysis (1)
- Multi-photon light structuring (1)
- Multi-principal element alloys (1)
- Multi-principal element alloys (MPEAs) (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multi-resistant bacteria (1)
- Multi-scale (1)
- Multi-scale measurements (1)
- Multicomponent (1)
- Multielectrode (1)
- Multilayercoatings (1)
- Multiphoton laser structuring (1)
- Multiple-sample bonding (MSB) (1)
- Multiple-sample handling (MSH) (1)
- Multiport (1)
- Multiscale simulation (1)
- Multivalency (1)
- Multivariate data analysis (1)
- Mussel-inspired adhesive systems (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- MySpot (1)
- Mössbauer Spectroscopy (1)
- Müller-Matrix Ellipsometrie (MM-IE) (1)
- NMR (1)
- NMR probe Development (1)
- NMR spectroscopy (1)
- NMR-Spektroskopie (1)
- NaI (1)
- Nafion 117 (1)
- Naica (1)
- Nano CRM (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano particle (1)
- Nano particles (1)
- Nano screening (1)
- Nano structure (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-characterisation (1)
- Nano-object (1)
- Nano-particles alignment (1)
- Nano-powder characterization (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoCAM (1)
- NanoValid (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanobiointerfaces (1)
- Nanocarrier (1)
- Nanocasting (1)
- Nanocomposite fibers (1)
- Nanocubes (1)
- Nanodielectrics (1)
- Nanodosimetry (1)
- Nanokomposit (1)
- Nanomaterial Properties (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial legislation (1)
- Nanomaterial properties (1)
- Nanomaterial regulation (1)
- Nanomaterial screening (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanoparticle Characterization (1)
- Nanoparticle size distribution (1)
- Nanoparticle size measurement (1)
- Nanoparticle synthesis (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanopartikel (1)
- Nanoplatform (1)
- Nanoplattform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanopowder (1)
- Nanopropous materials (1)
- Nanorisk Governance (1)
- Nanorods (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale measurements (1)
- Nanoscience (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanosilver (1)
- Nanostrcutures (1)
- Nanostructured FeOx films (1)
- Nanostrukturen (1)
- Nanotechnologie (1)
- Nanotechnologies (1)
- Native oxide layer (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Near-field spectroscopy (1)
- Neel wall (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Neutron Scattering (1)
- Neutron backscattering (1)
- Ni (1)
- NiMaGa (1)
- Nickel nanoparticles (1)
- Niedrigenergie-Polymeren (1)
- Nitrene[2+1]cycloaddition (1)
- Nitric acid (1)
- Nitrification (1)
- Nitrobenzene reduction (1)
- Nitrogen (1)
- Nobel-metal free electrocatalysis (1)
- Nomenclature (1)
- Non-destructiv testing (1)
- Non-destructive ambient analysis (1)
- Non-destructuve testing (1)
- Non-spherical nanoparticles (1)
- Nonclassical crystallization (1)
- Noncovalent interactions (1)
- Nondestructive testing techniques (1)
- Nonlinear lithography (1)
- Nonlinear optics (1)
- Nonspecific binding (NSB) (1)
- Normung Ellipsometrie (1)
- Nuclear Energy and Engineering (1)
- Nuclear magnetic resonance (1)
- Nucleus (1)
- Numerical simulations (1)
- OECD (1)
- OECD TG 125 (1)
- OH (1)
- OMS (1)
- Oberflächenmodifikation (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Oberflächenstrukturierung (1)
- Ochratoxin A (1)
- One-pot synthesis (1)
- Open Science (1)
- Open data on zenodo (1)
- Ophthalmology (1)
- Optical Constants (1)
- Optical analysis (1)
- Optical and Magnetic Materials (1)
- Optical assay (1)
- Optical birefringence (1)
- Optical characterization (1)
- Optical fibers (1)
- Optical films (1)
- Optical measurement technology (1)
- Optical measurements (1)
- Optical near field (1)
- Optical porosimetry (1)
- Optical scattering (1)
- Optical spectroscopy (1)
- Optical waveguides (1)
- Optically active surfaces (1)
- Optische Konstanten (1)
- Oral uptake (1)
- Ordered mesoporous carbon (1)
- Ordered mesoporous silica (1)
- Organic compounds (1)
- Organic phosphates (1)
- Organic-inorganic adsorbents (1)
- Organic/inorganic block copolymer (1)
- Orientation (1)
- Origin (1)
- Osmium (1)
- Osteogenesis (1)
- Oxocobaltates (1)
- Oxygen Evolution Catalyst (1)
- Oxygen reduction reaction (1)
- P25 (1)
- PC characterisation (1)
- PES (1)
- PIM-1 (1)
- PQQ (1)
- PU Learning (1)
- PUR (1)
- PVD-coatings (1)
- PVD-processes (1)
- PVDF (1)
- PVDF-Based membrane (1)
- PVME (1)
- Pair Distribution Functions (1)
- Paper mills (1)
- Paramagnetism (1)
- Particale size (1)
- Participatory Approach (1)
- Particle accretion (1)
- Particle architecture (1)
- Particle scatterin simulations (1)
- Particles as add-on features (1)
- Particles as imperfections (1)
- Particulate distributions (1)
- Partikelgrößenverteilung (1)
- Passive films (1)
- Pb isotopes (1)
- Pelletization (1)
- Pentafluoropyridine (1)
- Peptide (1)
- Peptide Library (1)
- Peptide binder (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance check (1)
- Pergamonmuseums (1)
- Periodate oxidation (1)
- Permeation (1)
- Pflanzenvirus (1)
- PhD training (1)
- Phantome (1)
- Pharmaceuticals (1)
- Pharmacy (1)
- Phase mask (1)
- Phase stability (1)
- Phase-contrast microscopy (1)
- Phonon interactions (1)
- Phosphate (1)
- Phosphine oxide (1)
- Phosphinine (1)
- Phosphonate esters (1)
- Phosphonates (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Photoelectrochemistry (1)
- Photoluminescence (1)
- Photons (1)
- Photophysics (1)
- Photoreforming (1)
- Photovoltaik (1)
- Physical Aging (1)
- Physical and theoretical chemistry (1)
- Physicochemical characterization (1)
- Physics and Astronomy (miscellaneous) (1)
- Piezoresponse (1)
- Pitfalls (1)
- Plant virus (1)
- Plasma Polymerization (1)
- Plasma Polymers (1)
- Plasma activation (1)
- Plasma deposition (1)
- Plasma diagnostics (1)
- Plasma treatments (1)
- Plasma-assisted ALD modification (1)
- Plasmon resonance (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Plasmonic photocatalysis (1)
- Plastic bottles (1)
- Plastic deformation (1)
- Plastic reference materials (1)
- PlasticEurope (1)
- PlasticTrace (1)
- Plasticity mechanism (1)
- Plastics (1)
- Plastikstrategie (1)
- Platinum group metals (1)
- Platinum-ruthenium colloid (1)
- Polarimetry (1)
- Polarization (1)
- Polarization spectroscopy (1)
- Pollution (1)
- Poly(acrylic acid) (1)
- Poly(amino phosphodiester) (1)
- Poly(ether-phosphoramide)s sulfides (1)
- Poly(ether-sulfone) (1)
- Poly(lactides) (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polycarboxylate ether (PCE), (1)
- Polyclonal Antibodies (1)
- Polydispersity (1)
- Polyelektrolyt (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polylactides (1)
- Polylaktid (1)
- Polylaktide (1)
- Polymer Hydrolysis (1)
- Polymer aging (1)
- Polymer analysis/characterization (1)
- Polymer based Nanocomposites (1)
- Polymer composites (1)
- Polymer degradation (1)
- Polymer electrolyte fuel cell (1)
- Polymer film (1)
- Polymer foils (1)
- Polymer membranen (1)
- Polymer nanocomposite (1)
- Polymer of Intrisic Maicroporosity (1)
- Polymer of intrinsic microporosity (1)
- Polymer size (1)
- Polymer-binding Peptides (1)
- Polymer-ceramic mixtures (1)
- Polymere (1)
- Polymeric membrane (1)
- Polymers and Plastics (1)
- Polymers of Intrinsic Microporosity (1)
- Polymers of intrinsic Microporosity (1)
- Polymers with intrinic microporosity (1)
- Polymorphy (1)
- Polynorbornes (1)
- Polyoxometalates (1)
- Polystyrene microparticles (1)
- Polyurethane acetate vinyl acrylate (1)
- Polyurethanes (1)
- Polyvinyl alcohol (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Pore orientation (1)
- Pore size tailoring (1)
- Pore space (1)
- Pore structure (1)
- Porosity (1)
- Porous carbon (1)
- Porous carbons (1)
- Position of carboxylate group (1)
- Post-modification by L-cysteine (1)
- Poster presentation (1)
- Postsynthetic modification (1)
- Powder (1)
- Power Electronics (1)
- Power electronics (1)
- Pphosphates (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Prediction (1)
- Prediction relative (1)
- Preferred orientation (1)
- Preparation (1)
- Presolvated electron (1)
- Primer (1)
- Principal Component Analysis (1)
- Principle component analysis (1)
- Procedure (1)
- Process analytical technology (1)
- Process control (1)
- Propolis (1)
- Protection housing (1)
- Protein A (1)
- Protein Purification (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Protein structure (1)
- Proton conducting materials (1)
- Proton cunductor (1)
- Proton exchange membrane fuel cells (1)
- Prozessanalytik (1)
- Prozesskontrolle (1)
- Prüfgeschwindigkeiten (1)
- Prüftechnik (1)
- Pseudo-translationalsublattices (1)
- Pseudomonas aeruginosa (1)
- Pseudomonas fluorescens (1)
- Pull-off test (1)
- Pulse Laser (1)
- Pulsed laser ablation (1)
- Pump-probe (1)
- Py-GC/MS (1)
- QUASES (1)
- Quality Control (1)
- Quality control (1)
- Quality infrastructure (1)
- Quantitative surface chemical analysis (1)
- Quantum Chemistry (1)
- Quantum Dots (1)
- Quantum chemical bonding analysis (1)
- Quantum dot (1)
- Quantum mechanics (1)
- Quarzglas (1)
- Quasi-harmonic approximation (1)
- Quick-XAS (1)
- RAMAN (1)
- RBE (1)
- RNA (1)
- RUSEKU (1)
- RXES (1)
- Radical Scavenge (1)
- Radioactive NP (1)
- Radiografische Untersuchung (1)
- Raman Spectroscopy (1)
- Rare earth elements separations (1)
- Rauheit (1)
- Re-crystallization (1)
- Reactions (1)
- Reactive sputtering (1)
- Real-time infrared spectroscopy (1)
- Recycling-by-design (1)
- Reference Method (1)
- Reference Nanomaterials (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Reference products (1)
- Reference samples (1)
- Reference standards (1)
- Reference structure (1)
- Refractory alloys (1)
- Regeneration (1)
- Regional workshop (1)
- Reibungsreduktion (1)
- Reifenabrieb (1)
- Reliable characterization (1)
- Renewable Energy (1)
- Renewable Energy, Sustainability and the Environment (1)
- Renewable copolymers (1)
- Repelling surface coatings (1)
- Representative morphology modeling (1)
- Reproducibility crisis (1)
- Research ethics (1)
- Resins (1)
- Resonance (1)
- Reverse Monte Carlo (1)
- Reversible Hydrogen Storage (1)
- Reversible adsorption. (1)
- Rh-Ir alloys (1)
- Rhodiumcomplexes (1)
- Ridis amorphous fraction (1)
- Rigid (1)
- Ringversuch (1)
- Ringversuch Ellipsometrie (1)
- Ringversuche (1)
- Risk Governance (1)
- Risk asessment (1)
- Risstrajektorie (1)
- Roadmap (1)
- Robocasting (1)
- Robotic synthesis (1)
- Robotic-supported synthesis (1)
- Robust nano objects (1)
- Robustness (1)
- Rod-like liquid crystals (1)
- Roughness (1)
- Round robin test (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SDS-PAGE (1)
- SEM micrography (1)
- SEM/EDS/STRATAGem (1)
- SKPFM (1)
- SKPM (1)
- SLS (1)
- SPR (1)
- SSB (1)
- STEM-in-SEM (1)
- STEM-in-SEM (TSEM) (1)
- STL file input (1)
- Sabatier (1)
- Safe-by-design (1)
- Salicylate (1)
- Saline brine (1)
- Sall-angle scattering (1)
- Sample peparation (1)
- Saphir (1)
- Saponite (1)
- Scaffold (1)
- Scannig probe microscope (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning Probe Microscopy (1)
- Scanning Probe methods (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning probe measurements (1)
- Scanning probe microscopy (1)
- Scanning transmission X-ray microscopy (STXM) (1)
- Scattering pattern (1)
- Scattering pattern simulation (1)
- Schichtdicke (1)
- Schichtdicken (1)
- Schlangenbohne (1)
- Schriftrollen vom Toten Meer (1)
- SchwarzP cells (1)
- Scientific misconduct (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Segregation Engineering (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Self-degrading (1)
- Self-driving-labs (1)
- Self-healing (1)
- Self-healing silicone rubber (1)
- Self-lubricating coating (1)
- Semi-Interpenetrating Network (1)
- Semi-interpenetrating networks (1)
- Semiconductor (1)
- Semiconductor nanocrystals (1)
- Semiconductors (1)
- Sensing (1)
- Sensorvalidierung (1)
- Separability assumption (1)
- Separate sewer system (1)
- Separation (1)
- Separation membranes (1)
- Sequential spectroscopic data (1)
- Service life (1)
- Shape-controlled (1)
- Shape-memory alloys (1)
- Shell (1)
- Short chained Phthalates (1)
- Short chained phthalates (1)
- Short range order (1)
- Si wafer filter (1)
- Si-Ge (1)
- Siderite (1)
- Silanes (1)
- Silbernanopartikel (1)
- Silica gel modification (1)
- Silica particles (1)
- Silicone elastomer (1)
- Silk (1)
- Sillver (1)
- Silver (1)
- Simulations (1)
- Simvastatine (1)
- Single particle (1)
- Single source precursors (1)
- Singulettsauerstoff (1)
- Sintered Material (1)
- Sintering (1)
- Size and size distribution (1)
- Size measurement (1)
- Size measurements (1)
- Size-exclusion chromatography (SEC) (1)
- Slicers (1)
- Sliding (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle X-ray Scattering (1)
- Small-area XPS (1)
- Small-spot XPS (1)
- Smart materials (1)
- Soda lakes (1)
- Sodium carbonate minerals (1)
- Soft-templated (1)
- Software UNIFIT 2022 (1)
- Soil (1)
- Sol-gel synthesis (1)
- Solar concentrator (1)
- Solar energy (1)
- Solarpur (1)
- Solid phase (1)
- Solid-binding Peptides (1)
- Solid-phase extraction (SPE) (1)
- Sonochemical synthesis (1)
- Sorption isotherm (1)
- Sorption mechanism (1)
- Specific Surface Area (BET) (1)
- Specific heat spectroscopx (1)
- Spectral induced polarization (1)
- Spectroscopic Imaging (1)
- Spectroscopic ellipsometry (SE) (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spektrale Ellipsometrie (SE) (1)
- Spektroskopie (1)
- Spin (1)
- Spin-lattice coupling (1)
- Spirocyclic (1)
- Spontaneous emulsification (1)
- SrF2 (1)
- Stacking fault energy (1)
- Stainless Steel (1)
- Stakeholder (1)
- Standard Operation Procedures (1)
- Standard operation procedures (1)
- Standardarbeitsanweisung (1)
- Standardisierung (1)
- Standardization of Ellipsometry (1)
- Standardization of ellipsometry (1)
- Standardized check (1)
- Static light scattering (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Statistischen Untersuchung (1)
- Steels (1)
- Stereocomplex (1)
- Stimuli-responsive polymers (1)
- Stochastic Landau Lifshitz equation (1)
- Storage module (1)
- Stormwater retention tank (1)
- Strahlentherapie (1)
- Strategy and Management (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural Health Monitoring (SHM) (1)
- Structural Materials (1)
- Structural characterisation (1)
- Structural color (1)
- Structural control (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (SHM) (1)
- Structural phase transition (1)
- Structural precision (1)
- Structural sealant glazing (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure-mechanical property correlation (1)
- Structure-property relationship (1)
- Structures under extreme conditions (1)
- Structure–property correlation (1)
- Stuccos (1)
- Stumpfklebungen (1)
- Sulfated materials (1)
- Sulfur (1)
- Sulphidation (1)
- Sulphuric acid (1)
- Superconductivity (1)
- Superior sorbent (1)
- Superparamagnetism (1)
- Supramolecular chemistry (1)
- Supramolecules (1)
- Surface Activation (1)
- Surface Analysis Working Group (1)
- Surface Chemical Transformation (1)
- Surface characterization (1)
- Surface chemisttry (1)
- Surface coating (1)
- Surface engineering (1)
- Surface morphology and chemistry (1)
- Surface plasmon polaritons (1)
- Surface plasmon resonance (1)
- Surface plasmon resonance enhanced ellipsometry (SPREE) (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface-initated grafting (1)
- Surfaces, Coatings and Films (1)
- Sustainability and the Environment (1)
- Sustainable Synthesis (1)
- Sustainable chemisry (1)
- Suzuki-Miyaura coupling (1)
- Swell-capture (1)
- Synchrotron CT (1)
- Synthesis library (1)
- Synthesizability (1)
- System method (1)
- Systems architecture (1)
- TOPAS-nBio (1)
- TPU (1)
- TRIP Steel (1)
- TRL (1)
- TSEM (1)
- TWIP Steel (1)
- TXRF-XAS (1)
- Tara Mediterranee (1)
- Targeted nanoparticle (1)
- Technical Lignin (1)
- Technische Materialien (1)
- Temparatur modulated Flash DSC (1)
- Temperature dependent ellipsometry (1)
- Temperature effects (1)
- Temperature modulated DSC (1)
- Temperature modulated differential scanning calorimetry (1)
- Temporal beam shaping for precision machining (1)
- Tensile Stress (1)
- Tensile strength of coatings (1)
- Tensile strength of laminates (1)
- Tensile testing machine (TTM) (1)
- Termites (1)
- Ternary zinc alloys (1)
- Terpolymer (1)
- Test artifact (1)
- Test material (1)
- Test structure (1)
- Tetraethyl orthosilicate (1)
- Textile binder (1)
- Textile company (1)
- Textile fibres (1)
- Themal Transitions (1)
- Theoretical modelling (1)
- Theory (1)
- Therapeutic Antibodies (1)
- Thermal Properties (1)
- Thermal analysis (1)
- Thermal annealing (1)
- Thermal conductivity (1)
- Thermal desorption analysis (1)
- Thermal desorption mass spectrometry (1)
- Thermal expansion (1)
- Thermal extraction-desorption gas chromatography mass spectrometry (1)
- Thermal süectroscopy (1)
- Thermal transport (1)
- Thermo-desorption (1)
- Thermo-responsive polymers (1)
- Thermoanalytische Verfahren (1)
- Thermochemistry (1)
- Thermodynamic Properties (1)
- Thermogravimetry (1)
- Thermomagnetic material (1)
- Thermoplastic Polyurethane (1)
- Thermoset composition (1)
- Thermosets (1)
- Thetaevolve (1)
- Thin Layers (1)
- Thin Polymer Layers (1)
- Thin epoxy-based films (1)
- Thin film analysis (1)
- Thin film systems (1)
- Thin mesoporous films (1)
- Thiols (1)
- Threshold (1)
- Thumor therapy (1)
- Ti-6Al-4V alloy (1)
- Ti-based colloids (1)
- Ti6Al4V alloys (1)
- TiO2 D540 nanoparticles (1)
- TiO2 PVP (1)
- TiO2 nanoparticle (1)
- TiO2 nanoparticles (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-Flight secondary ion mass spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Tin catalysts (1)
- Tin(II)octanoate (1)
- Tire wear (1)
- Titanium alloys (1)
- Titanium oxide (1)
- ToF SIMS (1)
- Tomography (1)
- Tools (1)
- Tools to combat scientific misconduct (1)
- Topas-nbio (1)
- TopasMC (1)
- Topometric characterization (1)
- Topometry (1)
- Topotactic phase transitions (1)
- Total scattering (1)
- Total scattering analysis (1)
- Traceability derivation (1)
- Traceable nanoparticle size measurements; (1)
- Transformation pathways (1)
- Transition electron microscopy (1)
- Transition-metal doped (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transmissionselektronenmikroskopie (1)
- Transparency (1)
- Transparent conductive Oxides (1)
- Transpassive dissolution (1)
- Trends (1)
- Triazine (1)
- Tribochemistry (1)
- Tungsten (1)
- Twin orientation relationship (1)
- Twin-screw extrusion (TSE) (1)
- Two photon polymerisation (1)
- Two photon polymerization (1)
- Two-Photon Polymerization (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Two-dimensional liquid chromatography (2D-LC) (1)
- Two-photon adsorption (1)
- Two-photon polymerisatio (1)
- Tyrosine (1)
- UCST polymers (1)
- UCST-type polymers (1)
- UPLC (1)
- UV Weathering (1)
- UV-curing (1)
- UV-irradiation (1)
- Ultrafast scattering (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultrashort (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser (1)
- Uncertainty budget (1)
- Unintended particle generation (1)
- Up-cycling (1)
- Upscaling (1)
- VMAAS (1)
- VOx catalyst (1)
- VRFB (1)
- Validation (1)
- Validation concepts of ellipsometric measurements (1)
- Validierung (1)
- Van der Waals forces (1)
- Vanadium speciation (1)
- Variable excitation (1)
- Variable temperature (1)
- Vergleichsuntersuchungen (1)
- Vergleichsversuche (1)
- Verschleißreduktion (1)
- Vickers hardness (1)
- Video (1)
- Vigna unguiculata (1)
- Vinyl monomer (1)
- Virucidality (1)
- Visco-elastic (1)
- Volatiles from thermosets (1)
- Volcano plot (1)
- Volume processing, waveguide writing (1)
- Volume specific surface area (1)
- Wasserstoff (1)
- Waste heat recovery (1)
- Wastewater (1)
- Water (1)
- Water atmosphere (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water management (1)
- Water samples (1)
- Water stability (1)
- Water treatment (1)
- Waxs (1)
- Weathering (1)
- Weibern tuff (1)
- Weißlichtinterferenzmikroskopie (WLIM, 3D) (1)
- Welding (1)
- White Light Interference Microscopy (1)
- White light interference microscopy(WLIM) (1)
- White light interferometric microscopy (1)
- White light interferometry microscopy (1)
- White-light Interference Microscopy (1)
- Wide-bandgap semiconductors (1)
- Wide-range (1)
- Wood (1)
- Writing (1)
- X-Ray Imaging (1)
- X-Ray Reflectometry (1)
- X-Ray Spectroscopy (1)
- X-Ray imaging (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Fluorescence (1)
- X-ray Photoelectron Spectroscopy (XPS) (1)
- X-ray absorption near edge structure (XANES) (1)
- X-ray crystal analysis (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray fluorescence spectroscopy (1)
- X-ray generation (1)
- X-ray hazards during ultrafast laser processing (1)
- X-ray imaging (1)
- X-ray instrumentation (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray microscopy (1)
- X-ray photoelectron (1)
- X-ray photoelectron spectroscopy (XPS) (1)
- X-ray production efficiency (1)
- X-ray spectrometer (1)
- X-ray spectroscopic techniques (1)
- X-ray spectrum (1)
- X-ray tomographic (1)
- X-rays (1)
- XCT (1)
- XPS spctroscopy (1)
- XUV scattering (1)
- Xerogel (1)
- Xpoxy resin (1)
- Young´s modulus (1)
- Yttria-stabilized zirconia (1)
- Yttrium silicates (1)
- Zeolites (1)
- Zeolithe (1)
- Zeolitic Imidazolate Frameworks (1)
- Zinc catalyst (1)
- Zinc oxide nanoparticles (1)
- Zinc phosphate (1)
- ZnO (1)
- ZnO films (1)
- ZnO nanoparticles (1)
- ZnO nanorods (1)
- ZnO nanorods Nanocrystalline (1)
- ZnSe (1)
- ZrO2 nanoparticles (1)
- Zugprüfung mittels Zentrifugentechnologie (1)
- Zugprüfung mittels Zugprüfmaschine (1)
- Zweistichproben t Test: (ZPM) (1)
- Zyklen (1)
- [MMIM]+[DMP]− (1)
- abasic side (1)
- analytical service (1)
- attraktive Wechelwirkung (1)
- automation (1)
- base loss (1)
- clustered nanoparticles (1)
- corrosion (1)
- dielectric spectroscopy (1)
- dsDNA (1)
- electron microscopy (1)
- gamma ray (1)
- gas separation membranes (1)
- gold (1)
- graphene related 2D materials (1)
- high entropy alloys (1)
- instrument utilization (1)
- laboratory automation (1)
- laboratory management (1)
- mechanical properties (1)
- metadata collection (1)
- molecular mobility (1)
- nanoindentation (1)
- oxidation (1)
- oxidative stress (1)
- performance test (1)
- polymers (1)
- polymers of intrinsic microporosity (1)
- polynorbornenes (1)
- product specification (1)
- radiolysis (1)
- research efficiency (1)
- ring-expansion polymerization (1)
- scanning electron microscopy (1)
- shape control (1)
- stl code (1)
- sulfidation (1)
- temeprature dependent exchange length (1)
- total scattering (1)
- transmission mode (1)
- uncertainty (1)
- µ-CT (1)
- µ-FTIR (1)
- µ-Raman (1)
- µ-XRF (1)
- µ-contact printing (1)
- Ägyptisches Museum Berlin (1)
- Δμ XANES (1)
Organisationseinheit der BAM
- 6 Materialchemie (1580) (entfernen)
Paper des Monats
- ja (15)
Compound semiconductors (CS) are promising materials for the development of high-power electrical applications. They have low losses, can withstand high temperatures and can operate at very high voltages and currents. This makes them a key technology for the electrification of many high energy applications, especially electromobility and HVDC power lines.
The challenge with CS technology is that most of the process technology has to be developed anew to the high standards required by electronic applications. Today, compound semiconductors can be produced in thin layers on top of substrates fabricated from classical crystal growth processes that are already well established. A promising method for this is metal organic vapour phase epitaxy (MOVPE). With this method, many different compounds with semiconducting properties can be synthesized. Additionally, this process technology is a direct thin layer deposition method. Therefore, complex multilayer systems can be generated directly by the deposition process and without the need of doping after growing.
There are a number of critical defects that can originate from the deposition process of these thin film devices. Within this project, we intend to develop new correlative imaging and analysis techniques to determine defect types, to quantify defect size and number density, as well as to characterise defects for process optimisation.
We report here on the use of spectroscopic ellipsometry and imaging ellipsometry to investigate defects in several different compound semiconductor materials used in high-power electronic devices. The materials we investigated are β-Ga2O3, SiC, GaN, AlN, and AlGaN materials as well as oxidised SiC surfaces. All of these materials have their typical defects and require optimised measurement and analysis schemes for reliable detection and analysis. Spectroscopic ellipsometry is a highly sensitive method for determining the thicknesses and dielectric function of thin layers, yielding potentially a high number of microscopic properties. The combined method between ellipsometry and optical microscopy is called imaging ellipsometry and is especially powerful for the large amount of data it produces. We have analysed defects in SiC- and AlN-based thin film semiconductors as well as characterised the properties of different types of SiO2 layers created on top of SiC monocrystals. We developed ellipsometric models for the data analysis of the different semiconductor materials.
If the defects have geometric features, it is useful to combine the ellipsometric analysis with topometry method like interference microscopy and scanning probe microscopy. We have successfully characterised function-critical defects in MOVPE SiC layers and correlated the findings with topography from WLIM measurements. We have developed an imaging ellipsometric measurement methodology that allows to estimate the relative defect area on a surface by a statistical raw data analysis.
Compound semiconductors (CS) are promising materials for the development of high-power electrical applications. They have low losses, can withstand high temperatures and can operate at very high voltages and currents. This makes them a key technology for the electrification of many high energy applications, especially electromobility and HVDC power lines.
The challenge is that most of the process technology has to be developed specifically and tailored to the high standards required by electronic applications. Today, many different CS materials can be produced in thin layers on top of substrates fabricated from classical crystal growth processes that are already well established. A promising method for this is metal organic vapour phase epitaxy (MOVPE). This technology is a direct thin layer deposition method capable of producing complex multilayer systems directly from one deposition process without the need of doping after growing.
There are a number of critical defects that can originate from the deposition process when targeting electronic thin film devices. Within this project, we intend to develop new correlative imaging and analysis techniques to determine defect types, to quantify defect size and density, as well as to characterise defects for further process optimisation.
We report here on the use of spectroscopic and multispectral imaging ellipsometry to investigate defects in several different compound semiconductor materials used in high-power electronic devices. The materials we investigated are β-Ga2O3, SiC, GaN, AlN, and AlGaN as well as oxidised SiC. All of these materials have their typical defects and require optimised measurement and analysis schemes for reliable detection and analysis. Spectroscopic ellipsometry is a highly sensitive method for determining the thicknesses and dielectric function of thin layers, yielding potentially a high number of microscopic properties. The combined method between ellipsometry and optical microscopy is known as imaging ellipsometry and is especially powerful for the large amount of data it produces. We have analysed defects in SiC- and AlN-based thin film semiconductors as well as characterised the properties of different types of SiO2 layers created on top of SiC monocrystals. We developed ellipsometric models for the data analysis of the different semiconductor materials.
If the defects have geometric features, it is useful to combine the ellipsometric analysis with topometry methods like interference microscopy and scanning probe microscopy. We have successfully characterised function-critical defects in MOVPE SiC layers and correlated the findings with topography from WLIM measurements. We have developed an imaging ellipsometric measurement methodology that allows to estimate the relative defect area on a surface by a statistical raw data analysis.
Ellipsometry as optical metrology method for analysis of reference materials for nanoelectronics
(2024)
Electrical properties of materials at the nanoscale can be characterized using scanning microwave microscopes (SMM) and conductive atomic force microscopes (C AFM). However, the measurement results are difficult to compare since different setups and different reference standards are used. The development of new “out-of-lab” reference standards can contribute to the traceability and reliability of these scanning probe microscopy methods (SPM) and facilitate their broader industrial application.
In this study, we discuss the capability of optical methods such as ellipsometry for the characterization of existing and the development of new reference calibration samples for scanning microwave microscopy. Ellipsometry is a fast and non-destructive method, which enables very accurate determination of the layer thickness and the dielectric functions of the materials. Imaging ellipsometry is suitable for spatially resolved measurements when analyzing thin layers in microstructured samples.
We show how the electrical resistivity of indium tin oxide (ITO) layers in newly designed resistive calibration samples can be obtained from spectroscopic ellipsometric measurements. The extension of the measurement range into the mid-infrared region was necessary when analyzing ITO layers with low conductivity. This parameter was obtained by fitting a Drude function describing the absorption of the free carriers. The impact of the coating process conditions on the layer properties is discussed.
Imaging ellipsometry was applied for the characterisation of thin ITO and SiO2 layers in microstructured resistive and capacitance calibration kits. The uncertainties of determined layer thicknesses were specified according to standardized practice guides used in ellipsometry. We show how statistical fingerprint analysis of the measured ellipsometric transfer quantities can be used to validate the quality of potential reference materials for nano-electronics and to monitor the processing of structured samples.
The DACHS (Database for Automation, Characterization and Holistic Synthesis) project aims to create completely traceable experimental data, covering syntheses, measurements, analyses, and interpretations. DACHS_MOFs focuses on the synthesis and characterisation of metal-organic frameworks, across multiple, automation-assisted experimental series (AutoMOFs), with the overall goal of producing reproducible MOF samples through tracking of the synthesis parameters.
DACHS_MOFs is simultaneously used to test the DACHS principles.
This upload contain synthesis data from AutoMOFs_1 in HDF5 format (.h5). Each .h5 file contains detailed information on the chemical, experimenal, and synthesis parameters used during the synthesis of a single AutoMOF sample.
Recent publications indicate that the order of electrochemical anodization (before or after the laser processing step) plays an important role for the response of bone-forming osteoblasts—an effect that can be utilized for improving permanent dental or removable bone implants. For exploring these different surface functionalities, multimethod morphological, structural, and chemical characterizations are performed in combination with electrochemical pre- and postanodization for two different characteristic microspikes covered by nanometric laser-induced periodic surface structures on Ti–6Al–4V upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ≈1 ps pulse duration, 67 and 80 kHz pulse repetition frequency) at two distinct sets of laser fluence and beam scanning parameters. This work involves morphological and topographical investigations by scanning electron microscopy and white light interference microscopy, structural material examinations via X-ray diffraction, and micro-Raman spectroscopy, as well as near-surface chemical analyses by X-ray photoelectron spectroscopy and hard X-ray photoelectron spectroscopy. The results allow to qualify the mean laser ablation depth, assess the spike geometry and surface roughness parameters, and provide new detailed insights into the near-surface oxidation that may affect the different cell growth behavior for pre- or postanodized medical implants.
Morphological and chemical analysis of mesoporous mixed IrOx-TiOy thin films as electrode materials
(2024)
Porous films play an important role particularly in energy applications like photovoltaics, electrolysis or batteries. Thin film properties such as thickness, chemical composition, crystallinity of the framework, and porosity define the activity of the porous films. The accurate morpho-chemical characterisation of mesoporous thin films is a challenging analytical task which requires the consideration of new analytical approaches based on the combination of data of different methods able to address the structure and chemical composition at the nanoscale. In this contribution we characterise thin mesoporous iridium-titanium mixed oxide film properties by Electron Probe Microanalysis (EPMA) with Energy-Dispersive X-ray Spectroscopy (EDS) at an SEM applied in a dedicated “thin film analysis” approach (1). Thus, the film mass deposition, film thickness and the film density can be determined. Further, by dividing the measured film density to an assumed (theoretical) metal oxide framework (skeletal) density, the thin film porosity can be extracted, too.
In order to assess the homogeneity of the thin film properties like the chemical composition, Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS) and Auger Electron Spectrometry are applied in the depth profiling mode, so that possible in-depth gradients are detected. Lateral inhomogeneities in the chemical composition and structure of the thin mesoporous films are also identified by applying the same methods in the line-scan or mapping mode, which can be further combined with in-depth sputtering for 3D information. The role of the spatial resolution of the analytical methods considered, which can go down well below 100 nm, will be highlighted.
Traceable morphological and chemical characterization of nanomaterials with respect to the various possible sizes, size distributions, shapes, and concentrations of real-world nanoparticles (NPs) is a challenging task. Particularly for the nonspherical, non-monodisperse nanoparticles – as typically for most of the commercial particles, including their strong tendency to agglomerate, there is a lack of standard operation procedures providing accurate nanoparticle characterisation.
In the framework of the pre-standardisation framework of VAMAS (Versailles Project on Advanced Materials and Standards, www.vamas.org) two interlaboratory comparison (ILC) studies are being carried out under the Technical Working Area (TWA) 34 “Nanoparticle Populations”:i) Project #15 addresses the analysis of the size and shape distribution of TiO2 bipyramidal NPs by traceable imaging methods such as TEM, SEM, STEM-in-SEM, AFM as well as with SAXS as an ensemble method. This ILC is thought as the next level development of the case studies exemplified in the published ISO standards ISO 21363 and ISO 19749. It was agreed to complete the first ILC with the NPs already prepared according to the same procedure on a TEM grid, and, at a later stage, to carry out second ILCs with the same NPs distributed to the participants as liquid suspensions together with protocols for the uniform NP deposition on suited substrates - as developed and optimized within the European project nPSize. Once having good deposition protocols available, the door for automated image analysis gets opened. Corresponding image analysis protocols and reporting templates have been distributed to the ILC participants, too.
ii) Project #16: two spherical SiO2 NP samples with bi-modal size distributions in two nominal relative number concentrations were prepared and distributed also as liquid suspensions accompanied by sample preparation, measurement, and image analysis protocols and reporting templates. Here, the NP concentration is the primary parameter to be measured. For the imaging methods it is targeted to
measure the relative nanoparticle concentrations (relative populations of the two modes).
The results of all the participating laboratories, in both ILCs, compiled in comparative representations will be shown and discussed for the first time. The reduction of the measurement uncertainties associated to the size, shape and number-concentration results induced by the significant improvement of the sample preparation on substrates (as single particles with a high-density coverage), combined with welldefined image analysis procedures will be highlighted.
The production of formaldehyde on industrial scale requires huge amounts of energy due to the involvement of reforming processes in combination with the demand in the megaton scale. Hence, a direct route for the transformation of (bio)methane to formaldehyde would decrease costs and puts less pressure on the environment. Herein, we report on the use of zinc modified silicas as possible support materials for vanadium catalysts and the resulting consequences for the performance in the selective oxidation of methane to formaldehyde. After optimization of the Zn content and reaction conditions, a remarkably high space-time yield of 12.4 kgCH2O⋅kgcat − 1 ⋅h− 1 was achieved. As a result of the extensive characterization by means of UV–vis, Raman, XANES and NMR spectroscopy it was found that vanadium is in the vicinity of highly dispersed zinc atoms which promote the formation of active vanadium species as supposed by theoretical calculations. This work presents a further step of catalyst development towards direct industrial methane conversion which may help to overcome current limitations in the future.
Abstract. In power electronics, compound semiconductors with large bandgaps, like silicon carbide (SiC), are increasingly being used as material instead of silicon. They have a lot of advantages over silicon but are also intolerant of nanoscale material defects, so that a defect inspection with high accuracy is needed. The different defect types on SiC samples are measured with various measurement methods, including optical and tactile methods. The defect types investigated include carrots, particles, polytype inclusions and threading dislocations, and they are analysed with imaging ellipsometry, coherent Fourier scatterometry (CFS), white light interference microscopy (WLIM) and atomic force microscopy (AFM). These different measurement methods are used to investigate which method is most sensitive for which type of defect to be able to use the measurement methods more effectively. It is important to be able to identify the defects to classify them as critical or non-critical for the functionality of the end product. Once these investigations have been completed, the measurement systems can be optimally distributed to the relevant defects in further work to realize a hybrid analysis of the defects. In addition to the identification and classification of defects, such a future hybrid analysis could also include characterizations, e.g. further evaluation of ellipsometric data by using numerical simulations.
This contributions shows the first results of the ongoing interlaboratory comparisons under VAMAS/TWA 34 Nanoparticle populations related on the determination of pasrticle size distribution and relative concentration of nanoparticles and an example of an ILC running under VAMAS/TWA 41 Graphene and Related 2D Materials on the determination of the lateral diemsnions of graphene oxide flakes by Scanning Electron Microscopy. The link to related standardisation projects at ISO/TC Nanotechnologies are explained.
Advanced materials, such as nanomaterials, 2D materials, or thin films, play a crucial role in driving economic development and addressing major challenges in the coming years. These challenges include mitigating the impact of climate change, advancing lightweight engineering, enhancing catalysis, and improving medical applications.
To comprehend the performance of these materials and ensure their acceptance across various sectors as safe and sustainable for both humans and the environment, the availability of reference procedures, materials, and data is essential. One versatile tool for establishing such references and evaluating the proficiency of individual laboratories and their competencies is through (international) interlaboratory comparisons (ILC). Notably, initiatives like the Versailles Project on Advanced Materials and Standards (VAMAS) provide a platform for conducting ILCs.
This webinar will showcase various examples of interlaboratory comparisons, illustrating their impact on the development of reference products.
The presentation includes aspects of material design and characterization with a focus on lignin. Examples are the structural elucidation of lignosulfonates by means of two-dimensional chromatography, the mechanochemical degradation and functionalization of Kraft-Lignin with accompanying analytics. Future projects involving the incorporation of lignin into polymers will be presented.
A thousand times thinner than a human hair, nanoparticles (NPs) are finding applications in a range of modern products. However, as some can affect human health or the environment, knowing the types present is essential. Electron microscopy is the ‘gold standard’ for NP analysis, allowing identification based on manual size analysis, but a new method was required to analyse these particles quickly, accurately and in a consistent way.
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Compared to classical nonionic discotic liquid crystals, many liquid crystalline structures with a combination of electronic and ionic conductivity have been reported, which are of interest for separation membranes, artificial ion/proton conducting membranes, and optoelectronics. Unfortunately, a homogeneous alignment of the DILCs on the macroscale is often not achievable, which significantly limits the applicability of DILCs. Infiltration into nanoporous solid scaffolds can, in principle, overcome this drawback. However, due to the experimental challenges to scrutinize liquid crystalline order in extreme spatial confinement, little is known about the structures of DILCs in nanopores. Here, we present temperaturedependent high-resolution optical birefringence measurement and 3D reciprocal space mapping based on synchrotron X-ray scattering to investigate the thermotropic phase behavior of dopamine-based ionic liquid crystals confined in cylindrical channels of 180 nm diameter in macroscopic anodic aluminum oxide membranes. As a function of the membranes’ hydrophilicity and thus the molecular anchoring to the pore walls (edge-on or face-on) and the variation of the hydrophilic−hydrophobic balance between the aromatic cores and the alkyl side chain motifs of the superdiscs by tailored chemical synthesis, we find a particularly rich phase behavior, which is not present in the bulk state. It is governed by a complex interplay of liquid crystalline elastic energies (bending and splay deformations), polar interactions, and pure geometric confinement and includes textural transitions between radial and axial alignment of the columns with respect to the long nanochannel axis. Furthermore, confinement-induced continuous order formation is observed in contrast to discontinuous first-order phase transitions, which can be quantitatively described by Landau-de Gennes free energy models for liquid crystalline order transitions in confinement. Our observations suggest that the infiltration of DILCs into nanoporous solids allows tailoring their nanoscale texture and ion channel formation and thus their electrical and optical functionalities over an even wider range than in the bulk state in a homogeneous manner on the centimeter scale as controlled by the monolithic nanoporous scaffolds.
The talk summarizes challenges in microplastic analysis. It shows the preparation of microplastic reference materials as well as the testing on homogeneity and stability. The reference material is used in an international laboratory comparison to compare different detection methods used for microplastic analysis. The methods used were µ-IR (FTIR+LDIR) for number-based methods and TED-GC/MS and Py-GC/MS for mass-based methods. The ILC was done under the umbrella of VAMAS TWA 45. Results of the participants are presented.
Multiphoton lithography (MPL), an emerging microfabrication technique, shows great potential in a variety of applications ranging from tissue engineering to soft micro-robotics. Fabricated micro-objects often are expected to undergo shape morphing or bending. Furthermore, ensuring precise property tuning becomes detrimental for the functionality of MPL microstructures. Herein, we present novel MPL materials based on interpenetrating networks (IPNs), which effectively combine the advantages of acrylate and epoxy thermoset systems. A library of 3D MPL IPN microstructures with high 3D structural stability and tailored thermal and micromechanical properties is achieved. MPL laser velocity and fabrication power can be used to tune the morphology and therefore properties of IPN. New IPN microstructures with materials Young's moduli of 4 to 6 MPa demonstrate susceptibility to deformation with high to fully elastic response. Such soft elastic materials hold immense promise within morphable microsystems, soft micro-robotics and cell engineering applications.
Since microplastics (MPs) can be found everywhere and are becoming a problem of high concern, it is necessary to understand their physico-chemical properties. To obtain reliable analytical data a set of validated methods for sampling, sample preparation, detection, and data evaluation are needed.
To meet these needs an interlaboratory comparison (ILC) with 84 participants worldwide has been organized under the international pre-standardisation platform VAMAS (www.vamas.org/twa45/) as Project 2 “Development of standardized methodologies for characterisation of microplastics with microscopy and spectroscopy methods” within the Technical Working Area TWA 45 “Micro and Nano Plastics in the Environment”. In this ILC thermo-analytical methods (Py-GC/MS and TED-GC/MS) and vibrational methods (µ-Raman and µ-FTIR) have been tested and compared by providing a set of microplastic representative test materials and measurement protocols developed at BAM. The defined measurands were: particle number concentration, particle size distribution (PSD), and polymer identity and mass content. To increase the statistical quality, 6 samples were shipped together with blank samples. Hence, the ILC provides information on precision and accuracy of the results obtained with different methods as well as strengths and limitations of the proposed protocols.
Since microplastics (MPs) can be found everywhere and are becoming a problem of high concern, it is necessary to understand their occurrence and fate in the environment. However, to obtain data of high quality is very challenging, since measurement operating procedures differ from laboratory to laboratory. Currently, there are no standardized methods to analyze microplastics. One promissing possibility to adress standardization of the methodology and operating procedures are interlaboratory comparisons (ILCs). In this contribution we report the first results of an ILC on microplastic detection methods organized under the pre-stantdardisation plattform of VAMAS (www.vamas.org/twa45/) as Project 2 “Development of standardized methodologies for characterisation of microplastics with microscopy and spectroscopy methods”, within the Technical Working Area TWA 45 “Micro and Nano Plastics in the Environment”. The ILC has gathered 84 participants all over the world representing all continents. BAM, as the project leader, produced a set of reference microplastic materials, which have been distributed to all the participants together with the measurement protocols and reporting data templates.
Microplastic and nanoplastic particles (MNP) are spread all over the world in various types, shapes and sizes making it very challenging to accurately analyse them. Each sampling procedure, sample preparation method and detection technique needs suitable reference materials to validate the method for accurate results. Furthermore, the effects of these MNPs should be evaluated by risk and hazard assessment with test particles close to reality. To better understand MNP behavior and aid in clarification of their interactions with organisms, we produced several MNP materials by top-down procedure and characterized their properties. Since surface properties mostly determine particles’ toxicity, the aim of the present study was to determine which functional groups are present on MNPs and how the surface can be affected by the production process and particle’s environment.
Preliminary results of an interlaboratory comparison on microplastics organised by plasticsfate
(2023)
Microplastics are everywhere in the environment, but analytics is challenging. Since harmonisation is missing as well es suitable reference materials, BAM did under th umbrella of VAMAS funded by the EU Horizon 2020 project PlasticsFate a ILC for microplastic detection methods. Methods adressed were IR, Raman, Py-GC/MS and TED-GC/MS. The talk gives a first presentation and evaluation on the results.
Monitoring of microplastics in food matrices is crucial to determinate the human exposure. By direct ingestion microplastics could be released in the food during the production, through packaging and by consumer’s use. The absence of standard methods to quantify and detect different size range and type of microplastics has led to difficult and time consuming procedural steps, poor accuracy and lack of comparability. In this work, matrix characterization and laboratory experiments were used to investigate the efficiency of sample preparation in milk powder. This information is crucial to compile a standard procedure for sample preparation and digestion of common milk powder to detect different particle sizes and types of polymers. Charaterisation is done by TGA and TOC measurements.
Multiphoton lithography (MPL), an emerging truly 3D microfabrication technique, exhibits substantial potential in biomedical applications, including drug delivery and tissue engineering. Fabricated micro-objects are often expected to undergo shape morphing or bending of the entire structure or its parts. Furthermore, ensuring precise property tuning is detrimental to the realization of the functionality of MPL microstructures. Herein, novel MPL materials based on interpenetrating polymer networks (IPNs) are presented that effectively combine the advantages of acrylate and epoxy systems. IPNs with varying component ratios are investigated for their microfabrication performance and structural integrity with respect to thermal and micromechanical properties. A variety of high-resolution techniques is applied to comprehensively evaluate IPN properties at the bulk, micron, and segmental levels. This study shows that the MPL laser scanning velocity and power, photoinitiator content, and multi-step exposure can be used to tune the morphology and properties of the IPN. As a result, a library of 3D MPL IPN microstructures with high 3D structural stability and tailored thermal and micromechanical properties is achieved. New IPN microstructures with Young’s moduli of 3–4 MPa demonstrate high-to-fully elastic responses to deformations, making them promising for applications in morphable microsystems, soft micro-robotics, and cell engineering.
Cellulose nanofibrils (CNFs) with different charge densities were prepared and investigated by a combination of different complementary techniques sensitive to the structure and molecular dynamics of the system. The morphology of the materials was investigated by scanning electron microscopy (SEM) and X-ray scattering (SAXS/WAXS). The latter measurements were quantitatively analyzed yielding to molecular parameters in dependence of the charge density like the diameter of the fibrils, the distance between the fibrils, and the dimension of bundles of nanofibrils, including pores. The influence of water on the properties and the charge density is studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and broadband dielectric spectroscopy. The TGA measurements reveal two mass loss processes. The one at lower temperatures was related to the loss of water, and the second process at higher temperatures was related to the chemical decomposition. The resulting char yield could be correlated to the distance between the microfibrils. The DSC investigation for hydrated CNFs revealed three glass transitions due to the cellulose segments surrounded by water molecules in different states. In the second heating scan, only one broad glass transition is observed. The dielectric spectra reveal two relaxation processes. At low temperatures or higher frequencies, the β-relaxation is observed, which is assigned to localized fluctuation of the glycosidic linkage. At higher temperatures and lower frequencies, the α-relaxation takes places. This relaxation is due to cooperative fluctuations in the cellulose segments. Both processes were quantitatively analyzed. The obtained parameters such as the relaxation rates were related to both the morphological data, the charge density, and the content of water for the first time.
MALDI TOF Massenspektrometrie wurde verwendet, um Kristallisationsprozesse in Polyestern (Polylactide, Polyglycolide) zu untersuchen. Dabei konnte gezeigt werden, dass Zyklen und Linearen simultan, aber in unterschiedlichen Kristalliten, kristallisieren. Die dabei ablaufenden Umesterungen (Transesterifizierungen) konnten mit der MALDI TOF Massenspektrometrie nachgewiesen werden. Damit wurde ein völlig neues Anwendungsgebiet dieser MS Methode demonstriert.
The impact of magnetism on chemical ordering in face-centered cubic CrCoNi medium entropy alloy is studied by a combination of ab initio simulations, machine learning potentials, and Monte Carlo simulations. Large magnetic energies are revealed for some mixed L12 /L10 type ordered configurations, which are rooted in strong nearest-neighbor magnetic exchange interactions and chemical bonding among the constituent elements. There is a delicate interplay between magnetism and stability of MoPt2 and L12 /L10 type of ordering which may explain opposing experimental and theoretical findings.
An Amorphous Lewis-acidic Zirconium Chlorofluoride as HF Shuttle: C-F Bond Activation and Formation
(2024)
In recent years, fluorine chemistry has gained increasing political attention. Owing to a growing shortage of fluorspar, a raw material used for producing fluorinated base chemicals, fluorospar has been named among the 30 critical raw materials in the EU.2 As such, it becomes increasingly important to recycle existing fluorinated compounds and make them available as sources of fluorine for reactions. Significant progress has been made in the field of C-F bond activation using heterogeneous catalysts such as aluminum chlorofluoride (ACF).3–5 However, the transfer of fluorine atoms from one molecule to another using heterogeneous catalysts has not yet been reported. In this study, we successfully synthesized amorphous zirconium chlorofluoride (ZCF), and we were able to establish a catalytic behavior of ZCF in C-F bond activation reactions. We present a heterogeneous catalyst that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
Owing to a growing shortage of fluorspar, a raw material used for producing fluorinated base chemicals, fluorspar has been named among the 30 critical raw materials in the EU. 1 However, the sustainable transfer of fluorine atoms from one molecule to another using heterogeneous catalysts has not yet been reported. Herein, we present the heterogeneous catalyst zirconium chloro fluoride (ZCF) that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
Microplastic reference material is required for validation and harmonization purposes. This includes the analysis of the pure polymer particles and the validation of the respective measurement methods. In addition, there is the harmonization of different laboratories. On the other hand, sample preparation methods must be validated and harmonized with regard to their recovery and subsequent analysis in the respective matrices. For this purpose, we produce reference material candidates in the form of tablets with different mass fractions and particle numbers of polyethelene terephthalate. In the presentation first measurement results by µ-Raman, µ-FTIR, pyrolysis-GC-MS and TED-GC/MS will be presented.
The variability and heterogeneity in their structural composition is significant for nearly all synthetic and natural polymers. Beside molar mass also functionality type distribution, copolymer composition distribution and architectural features are responsible for changing the material properties.
A wide range of analytical techniques are available to get insight into these parameters. However, in most cases it is essential to combine different sophisticated techniques to get closer to actual structures and to avoid statistical averages.
Different liquid chromatographic separation modes and their coupling in a two-dimensional way (SEC, LCCC, HILIC, 2D-LC) in combination with suitable detection techniques (e.g. UV, RI, LS, IR, MALDI/ESI-MS) as well as techniques like BET, DCS, SEM/TEM were applied to make structural features visible.
A few aspects are discussed for structural different polylactides from various synthesis routes and their behavior in LC-MS.
Ring-opening polymerizations (ROPs) of l-lactide (LA) were performed with ethyl l-lactate or 11-bromoundecanol as initiators (In) and tin(II) ethyl hexanoate (SnOct2) as catalyst (Cat) using four different LA/In ratios (20/1, 40/1, 60/1, and 100/1). One series of ROPs was conducted in bulk at 120 °C, yielding PLAs with low dispersities (Ð ~ 1.2–1.4), and a second series was conducted in bulk at 160 °C, yielding higher dispersities (Ð ~ 1.3–1.9). Samples from both series were annealed for 1 or 14 days at 140 °C in the presence of SnOct2. Both polycondensation and disproportionation reactions occurred, so that all four samples tended to form the same type of molar mass distribution below 10,000 Da, regardless of their initially different number average molar masses (Mn). Both initiators gave nearly identical results. The thermodynamic control of all reversible transesterification processes favored the formation of crystallites composed of chains with a Mn around 3500–3700, corresponding to a crystal thickness of 10–13 nm.
Durch Auslagerungs- und elektrochemische Tests im Labor kann das Korrosionsverhalten verschiedener metallener Werkstoffe beurteilt werden. Aus den Versuchsergebnissen, die in verschiedenen synthetischen Geothermalwässern im Labor erzielt wurden, lassen sich die folgenden Schlussfolgerungen ziehen:
• Die Anfälligkeit für Spaltkorrosion wurde als wichtigster Aspekt für die Werkstoffqualifizierung ermittelt.
• Der niedriglegierte Stahl 25CrMo4 zeigte bei niedrigem Salzgehalt in MB-Geothermalwasser eine gleichmäßige Korrosion unterhalb der akzeptierten Schwelle von 0,3 mm/Jahr. Daher kann er als geeignet für geothermische Bedingungen mit niedrigem Salzgehalt angesehen werden, wie sie für MB getestet wurden. Es besteht keine Notwendigkeit, auf höherlegierte (teurere) Werkstoffe auszuweichen. Ein niedrigerer pH-Wert (wie bei LHD) führt zu Korrosionsraten oberhalb der akzeptablen Grenzwerte, so dass die niedriglegierten Werkstoffe nicht für Flüssigkeiten mit niedrigem pH-Wert geeignet sind.
• Stark salzhaltige Geothermalwässer erfordern höherlegierte Werkstoffe, da die Korrosionsrate von niedriglegiertem Stahl zu hoch ist.
• Der Duplexstahl X2CrNiMo22-5-3 und der Superduplexstahl X2CrNiMoCuWN25-7-4 wurden aufgrund ihrer kritischen Anfälligkeit für örtliche Korrosion in Form von Loch- und Spaltkorrosion unter Betriebsbedingungen nicht als geeignet für geothermische Anwendungen in Geothermalwässern mit einer mit NDB und ORG vergleichbaren Zusammensetzung angesehen.
• Der superaustenitische Stahl X1CrNiMoCu32-28-7 eignet sich für ORG und salzarme Wässer. In NDB-Geothermalwasser wurde er bei 100 °C als geeignet angesehen. Jedoch schränkt seine Anfälligkeit für Spaltkorrosion seine Anwendbarkeit ein. Neben seiner guten Korrosionsbeständigkeit ist sein Repassivierungsverhalten für seine begrenzte Anwendbarkeit in Geothermalwässern mit niedrigem pH-Wert verantwortlich.
• Die Nickelbasislegierung NiCr23Mo16Al wurde als geeignet erachtet und stellt eine sichere Option für den Einsatz in geothermischen Anlagen dar, selbst wenn mit stark salzhaltigem Geothermalwasser gearbeitet wird.
Durch Auslagerungs- und elektrochemische Tests im Labor kann das Korrosionsverhalten verschiedener metallener Werkstoffe beurteilt werden. Aus den Versuchsergebnissen, die in verschiedenen synthetischen Geothermalwässern im Labor erzielt wurden, lassen sich die folgenden Schlussfolgerungen ziehen:
• Die Anfälligkeit für Spaltkorrosion wurde als wichtigster Aspekt für die Werkstoffqualifizierung ermittelt.
• Der niedriglegierte Stahl 25CrMo4 zeigte bei niedrigem Salzgehalt in MB-Geothermalwasser eine gleichmäßige Korrosion unterhalb der akzeptierten Schwelle von 0,3 mm/Jahr. Daher kann er als geeignet für geothermische Bedingungen mit niedrigem Salzgehalt angesehen werden, wie sie für MB getestet wurden. Es besteht keine Notwendigkeit, auf höherlegierte (teurere) Werkstoffe auszuweichen. Ein niedrigerer pH-Wert (wie bei LHD) führt zu Korrosionsraten oberhalb der akzeptablen Grenzwerte, so dass die niedriglegierten Werkstoffe nicht für Flüssigkeiten mit niedrigem pH-Wert geeignet sind.
• Stark salzhaltige Geothermalwässer erfordern höherlegierte Werkstoffe, da die Korrosionsrate von niedriglegiertem Stahl zu hoch ist.
• Der Duplexstahl X2CrNiMo22-5-3 und der Superduplexstahl X2CrNiMoCuWN25-7-4 wurden aufgrund ihrer kritischen Anfälligkeit für örtliche Korrosion in Form von Loch- und Spaltkorrosion unter Betriebsbedingungen nicht als geeignet für geothermische Anwendungen in Geothermalwässern mit einer mit NDB und ORG vergleichbaren Zusammensetzung angesehen.
• Der superaustenitische Stahl X1CrNiMoCu32-28-7 eignet sich für ORG und salzarme Wässer. In NDB-Geothermalwasser wurde er bei 100 °C als geeignet angesehen. Jedoch schränkt seine Anfälligkeit für Spaltkorrosion seine Anwendbarkeit ein. Neben seiner guten Korrosionsbeständigkeit ist sein Repassivierungsverhalten für seine begrenzte Anwendbarkeit in Geothermalwässern mit niedrigem pH-Wert verantwortlich.
• Die Nickelbasislegierung NiCr23Mo16Al wurde als geeignet erachtet und stellt eine sichere Option für den Einsatz in geothermischen Anlagen dar, selbst wenn mit stark salzhaltigem Geothermalwasser gearbeitet wird.
In recent years, many protocols in computational materials science have been automated and made available within software packages (primarily Python-based). This ranges from the automation of simple heuristics (oxidation states, coordination environments) to the automation of protocols, including multiple DFT and post-processing tools such as (an)harmonic phonon computations or bonding analysis. Such developments also shorten the time frames of projects after such developments have been made available and open new possibilities. For example, we can now easily make data-driven tests of well-known rules and heuristics or develop quantum chemistry-based materials descriptors for machine learning approaches. These tests and descriptors can have applications related to magnetic ground state predictions of materials relevant for spintronic applications or for predicting thermal properties relevant for thermal management in electronics. Combining high-throughput ab initio computations with fitting, fine-tuning machine learning models and predictions of such models within complex workflows is also possible and promises further acceleration in the field. In this talk, I will show our latest efforts to link automation with data-driven chemistry and materials science.
The presentation gives an overview of BAM's activities on processing influences and application properties of MPEAs in the form of joined and machined high and medium entropy alloys (CoCrFeMnNi and CoCrNi). In the case of welding, the focus is on defect-free welded joints with sufficient mechanical properties. In the case of machining, the focus is on the possible influence on the surface quality of the materials through adequate milling parameters. In addition, the hydrogen absorption and diffusion properties as well as the electrochemical corrosion behavior are fundamentally examined.
Impact of organic phosphates on the structure and composition of short-range ordered iron nanophases
(2024)
Organic phosphates (OP) are important nutrient components for living cells in natural environments, where they readily interact with ubiquitous iron phases such as hydrous ferric oxide, ferrihydrite (FHY). FHY partakes in many key bio(geo)chemical reactions including iron-mediated carbon storage in soils, or iron-storage in living organisms. However, it is still unknown how OP affects the formation, structure and properties of FHY. Here, we document how β-glycerophosphate (GP), a model OP ligand, affects the structure and properties of GP–FHY nanoparticles synthesized by coprecipitation at variable nominal molar P/Fe ratios (0.01 to 0.5). All GP–FHY precipitates were characterized by a maximum solid P/Fe ratio of 0.22, irrespective of the nominal P/Fe ratio. With increasing nominal P/Fe ratio, the specific surface area of the GP–FHY precipitates decreased sharply from 290 to 3 m2 g−1, accompanied by the collapse of their pore structure. The Fe–P local bonding environment gradually transitioned from a bidentate binuclear geometry at low P/Fe ratios to monodentate mononuclear geometry at high P/Fe ratios. This transition was accompanied by a decrease in coordination number of edge-sharing Fe polyhedra, and the loss of the corner-sharing Fe polyhedra. We show that Fe(III) polymerization is impeded by GP, and that the GP–FHY structure is highly dependent on the P/Fe ratio. We discuss the role that natural OP-bearing Fe(III) nanophases have in biogeochemical reactions between Fe–P and C species in aquatic systems.
Laser-induced periodic surface structures (LIPSS) enable a large variety of different surface functionalizations for applications in the fields of optics, fluidics, tribology, or medicine. Moreover, high spatial frequency LIPSS (HSFL) provide an appealing and straightforward way for the generation of surface nanostructures featuring spatial periods even below 100 nm – far beyond the optical diffraction limit. However, the imposed surface functionalities are usually caused by both, topographic and chemical surface alterations. For exploring these effects in detail, multi-method characterization was performed here for HSFL processed on Ti-6Al-4V alloy upon irradiation with near-infrared ps-laser pulses (1030 nm wavelength, ~1 ps pulse duration, 1 – 400 kHz pulse repetition rate) under different scan processing conditions. The subsequent sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), stylus profilometry (SP), as well as near-surface chemical analyses by X-ray photoelectron spectroscopy (XPS), hard X-ray photoelectron spectroscopy (HAXPES) and depth-profiling time-of-flight secondary ion mass spectrometry (TOF-SIMS). The results allow to qualify the laser ablation depth, the geometrical HSFL characteristics and provide detailed insights into the depth extent and the nature of the ps-laser-induced near-surface oxidation arising from the laser-processing in ambient air and into the relevance of heat-accumulation effects at high pulse repetition rates. Moreover, the direct comparison of the HAXPES and XPS data reveals the role of surface-covering organic contaminants adsorbed from the ambient atmosphere without ion-sputter depth profiling. Furthermore, reduction of the oxides by sputtering can be avoided.
Advances in ultrafast laser manufacturing: nanostructures, thin films, and scaling perspectives
(2024)
Advanced ultrafast laser technology is a rapidly growing field that currently enables many new industrial and scientific applications. During the last decades, this has been significantly driven by the availability of high-repetition-rate laser sources and novel beam delivery concepts. At the laser side, Moore’s law equally manifests for ultrafast laser technologies, since the average output power of such lasers doubles approximately every two years. This development is mainly driven by the increase of the pulse repetition rates of energetic laser pulses, currently enforcing the development of smart beam control and novel scanning strategies for preventing heat-accumulation and plasma-shielding effects during laser-based materials processing. This keynote presentation addresses the advantages, recent developments, and perspectives of laser processing with ultrashort laser pulses. A special focus is laid on the tailored structuring of thin films as well as the manufacturing and probing of sub-diffraction surface nanostructures – an ongoing race to extreme scales. Current limitations are identified and an outlook to future scaling perspectives will be provided.
The presentation demonstrates an application of multi-scale optical imaging methods such as spectroscopic imaging ellipsometry and white light interference microscopy for the investigation of wide-bandgap semiconductors for power electronics. The capabilities of these methods for the development of new reference calibration samples for scanning microwave microscopes (SMM) and conductive atomic force microscopes (C AFM) are discussed.
Interactions between a polymer and a substrate interface play a vital role in understanding the improvement in thin film material properties as well as serving as a model for nanocomposites. For any non-repulsive polymer-substrate interactions, polymer segments form an irreversibly adsorbed layer and show a slowdown in the glassy dynamics and thus an increase in the thermal glass transition temperature compared to the bulk-like values. The growth kinetics of the adsorbed layer showed a deviation for both poly (bisphenol-A carbonate) (PBAC) and polysulfone (PSU), two bulky polymers containing a functional group (phenyl ring) in the backbone, compared to conventional polymers previously studied like poly-2-vinyl pyridine (P2VP). This deviation was attributed to the bulkiness of the phenyl rings. . Further investigations into the influence of the adsorbed layer on glassy dynamics were conducted. The molecular mobility and glass transition for thin films of PBAC and PSU were compared to bulk samples of each polymer. Broadband dielectric spectroscopy, atomic force microscopy, and ellipsometry were primarily used and additionally supported by sum frequency generation spectroscopy.
This is a set of use examples for the HDF5Translator framework. This framework lets you translate measurement files into a different (e.g. NeXus-compatible) structure, with some optional checks and conversions on the way. For an in-depth look at what it does, there is a blog post here.
The use examples provided herein are each accompanied by the measurement data necessary to test and replicate the conversion. The README.md files in each example show the steps necessary to do the conversion for each.
We encourage those who have used or adapted one or more of these exampes to create their own conversion, to get in touch with us so we may add your example to the set.
AbstractSorbents are promising materials for applications in atmospheric water harvesting, thermal energy storage, and passive cooling, thereby addressing central challenges related to water scarcity and the global energy transition. Recently, hygroscopic hydrogel composites have emerged as high‐performance sorbents. However, many of these systems are fabricated with unsustainable and costly sorbent materials, which hinders their wide deployment. Here, the synthesis of high‐performance, cost‐efficient polyacrylamide hydrogels loaded with unprecedented amounts of calcium chloride is demonstrated. To this end, the swelling procedure of polyacrylamide hydrogels in aqueous calcium chloride solutions is optimized. The achievable salt loading in the hydrogel is characterized as a function of temperature, calcium chloride concentration in the swelling solution, and the hydrogel preparation conditions. The obtained hydrogel‐salt composites are shown to be stable under repeated sorption‐desorption cycling and enable water uptakes of 0.92 and 2.38 grams of water per gram of dry materials at 30% and 70% relative humidity, respectively. The resulting cost‐performance ratio substantially exceeds lithium chloride‐based systems. Further, the mechanistic insights on hydrogel salt interactions can guide the design of sustainable and low‐cost sorbent materials for future applications in water and energy.
Glycolide was polymerized in bulk by means of four different ROPPOC catalysts: tin(II) 2-ethylhexanoate (SnOct2), dibutyltin bis(pentafluoro-phenoxide) (BuSnOPF),zinc biscaproate (ZnCap), and zinc bis(pentafluoro-phenyl sulfide) (ZnSPF). The temperature was varied between 110 and 180°C and the time between 3 h and 7 days. For the few polyglycolides (PGAs) that were soluble extremely high molecular masses were obtained. The MALDI TOF mass spectra had all a low signal-to-noise ration and displayed the peaks of cyclic PGAs with a“saw-tooth pattern ”indicating formation of extended-ring crystallites in the mass range below m/z 2500. The shape of DSC curves varied considerably with catalyst and reaction conditions, whereas the long-distance values measured by SAXS were small and varied little with the polymeriza-tion conditions.
A corrosion study is performed on six variations of titanium grade 5 (Ti6Al4V) samples. Samples are prepared in different conditions by variation of preanodization, postanodization, and picosecond-laser (ps-laser) surface treatment, while polished and anodized samples serve as reference. Microcones and nanosized periodic surface features are successfully produced on Ti6Al4V samples. The morphology and topography of the structures are visualized by scanning electron microscopy and white light interference microscopy. Furthermore, the relative electrochemically active surface area (ECSA) is determined for the ps-laser-treated samples. It is determined that the preanodized and laser-treated sample has 3.5 times larger ECSA than a polished sample, and that the laser-treated sample has 4.1 times larger area. Moreover, Tafel analysis is performed to determine the corrosion properties of the samples. It is shown that the corrosion resistance improves for both laser-structured samples after the anodization. To further study the surface of the samples, electrochemical impedance spectroscopy measurements are conducted. The study indicates that the ps-laser-treated and anodized Ti6Al4V is suitable to be used for the fabrication of bone screws and plates due to its improved corrosion resistance as compared to nonanodized samples.
The use of a dedicated approach: DoE for synthesis + characterization + Chemometric Analysis, is a valuable method for the safe-by-design synthesis of several types of materials for large-scale application in catalysis, energy harvesting, biomedical and environmental applications, etc. This approach is not only related to the material synthesis, but can be expanded to any type of molecules/material, with relevant saving of solvents, energy and times.
New analytic ways to characterise mesoporous thin layers used in electrocatalytic water splitting
(2024)
Mesoporous materials are needed in many applications where a high specific surface area and adsorptive behaviour is needed. Important examples are separation techniques and barrier layers and catalysts. Electrochemical water splitting is the key technology for producing green hydrogen and there is no foreseeable alternative to this process for producing elementary hydrogen from green electrical power. Water electrolysis can be divided into the anodic Oxygen Evolution Reaction (OER) and the cathodic Hydrogen Evolution Reaction (HER). Both processes have to be heavily optimised to a large extent to avoid energy losses caused by overvoltage. The development of electrodes for these processes is especially difficult due to the many boundary conditions. Water splitting is a catalytic as well as electrochemical process. The contact area between the electrolyte and the electrode must be maximised maintaining the stability of the surface. Side reactions must be suppressed, and effective gas transport must be ensured. The whole process has to be tolerant with respect to temperature, harsh chemical conditions from the electrolyte as well as high current densities.
We present a hybrid analytical method combining several analytical techniques for determining the properties of thin layers of mixed oxides of the general composition Ir:TiOx. These materials are promising candidates for electrocatalytical top coatings of OER electrodes. To lower the costs of the electrolysers, the main goal is to lower the Ir content retaining the system efficiency. The main properties which are hard to determine are the porous volume fraction and the Ir:Ti element ratio. By a combination of electron microscopy, spectroscopic operando ellipsometry, ellipsometric porosimetry, and other techniques, we can determine key features of mesoporous thin layer materials. We aim to develop operando capable techniques used in process monitoring as well as measurement techniques optimised for accuracy. By developing reference materials, we support long term uptake of our methodology. This work can directly be used for optimising electrocatalytic layers and is a good example for the power of hybrid metrology for improving materials design.
Polydopamine (PDA) is a biological / biomimetic polymer which has spiked considerable interest in recent years. Its monomer is an important neurotransmitter and it is one of the strongest glues produced by biological organisms. Polydopamine is a candidate for several applications, mainly in the field of biology and medicine, but also - recently - for layer coatings with optical, electrical, and mechanical function.
In this work, we investigate PDA layers intended as reflectivity enhancers for mirror surfaces in X-ray astronomical observatories. It has previously been shown, that such X-ray telescopes can be improved by a coating of PDA in the thickness range of several nm. Accurate thickness determination is required to monitor and optimise the coating process. We use spectroscopic ellipsometry to determine first the dielectric function of the polydopamine layers using model coatings of sufficient thickness. This data is then used to accurately determine the layer thickness of much thinner PDA layers. This study resulted in data on the thickness and dielectric function of PDA layers that could lead to a better understanding of the correlation of layer thickness and layer properties depending on the process parameters.
Transparent conductive oxides such as indium tin oxide (ITO) are standards for thin film electrodes, providing a synergy of high optical transparency and electrical conductivity. In an electrolytic environment, the determination of an inert electrochemical potential window is crucial to maintain a stable material performance during device operation. We introduce operando ellipsometry, combining cyclic voltammetry (CV) with spectroscopic ellipsometry, as a versatile tool to monitor the evolution of both complete optical (i.e., complex refractive index) and electrical properties under wet electrochemical operational conditions. In particular, we trace the degradation of ITO electrodes caused by electrochemical reduction in a pH-neutral, water-based electrolyte environment during electrochemical cycling. With the onset of hydrogen evolution at negative bias voltages, indium and tin are irreversibly reduced to the metallic state, causing an advancing darkening, i.e., a gradual loss of transparency, with every CV cycle, while the conductivity is mostly conserved over multiple CV cycles. Post-operando analysis reveals the reductive (loss of oxygen) formation of metallic nanodroplets on the surface. The reductive disruption of the ITO electrode happens at the solid–liquid interface and proceeds gradually from the surface to the bottom of the layer, which is evidenced by cross-sectional transmission electron microscopy imaging and complemented by energy-dispersive X-ray spectroscopy mapping. As long as a continuous part of the ITO layer remains at the bottom, the conductivity is largely retained, allowing repeated CV cycling. We consider operando ellipsometry a sensitive and nondestructive tool to monitor early stage material and property changes, either by tracing failure points, controlling intentional processes, or for sensing purposes, making it suitable for various research fields involving solid–liquid interfaces and electrochemical activity.
AbstractMicroplastics (MP) can be detected in all environmental systems. Marine and terrestrial aquatic systems, especially the transported suspended solids, have often been the focus of scientific investigations in the past. Sediments of aquatic river systems, on the other hand, were often ignored due to the time‐consuming sample preparation and analysis procedures. Spectroscopic measurement methods counting particle numbers are hardly suitable as detection methods, because there are plenty of natural particles next to a small number of MP particles. Integral methods, such as thermoanalytical methods are determining the particle mass independently of the inorganic components.In this study, a workflow for sample preparation via density separation and subsequent analysis by thermal extraction desorption‐gas chromatography/mass spectrometry is presented, which leads to representative and homogeneous samples and allows fast and robust MP mass content measurements suitable for routine analysis. Polymers were identified and quantified in all samples. Polyethylene and styrene‐butadiene rubber are the dominant polymers, besides polypropylene and polystyrene. Overall, total polymer masses between 1.18 and 337.0 µg/g could be determined. Highest MP concentrations in riverbed sediment are found in sites characterized by low flow velocities in harbors and reservoirs, while MP concentrations in sandy/gravelly bed sediments with higher flow velocities are small.
The plastic value chain, central part of modern living, caused environmental pollution and bioaccumulation of plastic nanoparticles (PNPs). Their ubiquitous presence in different environmental and biological compartments has become a serious threat to human health and ecosystems. Frequently used plastic materials such as polypropylene (PP), polystyrene (PS) and polyethylene (PE) have been detected in the form of PNPs in the food chain, soil, water and air, as well as in human feces and blood. In this study, we aimed to provide novel insights in endocrine disrupting properties of PNPs using in vitro estrogen receptor (ER) transactivation assay. The effects of PP-NPs, PE-NPs and PS-NPs and their mixture on T47D-KBluc cell line stably transfected with luciferase as reporter enzyme was evaluated by means of cytotoxicity, cellular uptake and ER activation. Tested dose range for PNPs was 0.001 – 10 mg/L. Both cellular uptake and cytotoxicity for all PNPs was found to be dose-dependent. Only the highest dose of PP-NPs and PE-NPs induced apoptosis and cell death, while PS-NPs were not cytotoxic in tested dose range. For tested concentrations, PP-NPs and PE-NPs showed significant agonistic activity on ER, while PS-NPs cannot be considered ER active. When, applied as mixture, PNP demonstrated additive toxicity effects compared to the effect of each individual PNPs. Additivity was also observed for ER agonistic effect of PNPs mixture according to the benchmark dose-addition modelling approach. This study provides missing science-based evidence on endocrine disrupting effects of PE-NPs, PP-NPs, PS-NPs and their mixtures and highlights the importance of considering unintentional, aggregate and combined exposure to different PNPs in risk management.
Bonds and local atomic environments are crucial descriptors of material properties. They have been used to create design rules and heuristics and as features in machine learning of materials properties. Implementations and algorithms (e.g., ChemEnv and LobsterEnv) for identifying local atomic environments based on geometrical characteristics and quantum-chemical bonding analysis are nowadays available. Fully automatic workflows and analysis tools have been developed to use quantum-chemical bonding analysis on a large scale. The lecture will demonstrate how our tools, that assess local atomic environments and perform automatic bonding analysis, help to develop new machine learning models and a new intuitive understanding of materials. Furthermore, the general trend toward automation in density functional-based materials science and some of our recent contributions will be discussed.
Der Vortrag gibt einen Überblick zu ultrakurzen Laserpulsen, der Ultrakurzpulslaser-Materialbearbeitung und der dabei ggf. auftretenden unerwünschten Röntgenstrahlung. Es wird die Laserbearbeitung von technischen und biologischen Materialien diskutiert. Schutzmöglichkeiten gegenüber der Röntgenstrahlung werden erörtert.
Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1 M NaCl, pH 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV-Vis) spectroscopy to elucidate metal dissolution processes. In-situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
Corrosion behaviour of AlCrFe2Ni2Mox (x = 0.0, 0.1, 0.15, 0.3 and 0.6) high-entropy alloys was investigated in a 0.1 M H2SO4 solution. Passive films formed upon anodic polarisation, built of Al-based inner layer and (Cr, Fe, Mo)-based outer layer, had good protective properties. In particular, they prevented corrosion of the (Al, Ni)-rich BCC-B2 phase, which was observed under open-circuit conditions. Moderate amounts of Mo, up to x = 0.3, positively affected the passivation ability of AlCrFe2Ni2. Significant changes in microstructure and phase composition of the alloy at higher Mo concentrations (x = 0.6) resulted in deterioration of its corrosion resistance.
The Na salt of chloroacetic acid is condensed in suspension. Furthermore,glycolic acid is condensed in bulk or in concentrated solution by means of SnCl2 or 4-toluene sulfonic acid (TSA) as catalysts. The temperatures are varied from 160 to 200°C and the time from 1 to 5 days. Low molar mass cyclic poly(glycolic acid) (PGA) is detected by means of matrix-assisted laser desorption ionization time-of-flight (MALDI TOF) mass spectrometry in most PGAs. A predominance of certain cycles having an even number of repeat units is observed suggesting a thermodynamically favored formation of extended-ring crystals. Extremely high melting temperatures (up to 237.5°C)and high melting enthalpies are found for polycondensations with TSA in 1,2-dichlorobenzene.
Two-dimensional covalent organic frameworks (COFs) based on phosphinine and thiophene building blocks have been synthesized with two different side groups. The materials are denoted as CPSF-MeO and CPSF-EtO where CxxF correspond to the covalent framework, whereas P and S are related to heteroatoms phosphorous and sulfur. MeO and EtO indicate the substituents, i.e. methoxy and ethoxy.
Their morphologies were studied by scanning electron microcopy and X-ray scattering. The absence of crystalline reflexes in the X-ray pattern reveal that both materials are amorphous and can be considered as glasses. Furthermore, N2 adsorption measurements indicate substantial Brunauer–Emmett–Teller (BET) surface area values pointing to the formation of three-dimensional pores by stacking of the aromatic 2D layer. An analysis of the porosity of both COFs showed a mean radius of the pores to be of ca. 4 nm, consistent with their chemical structure. The COFs form nanoparticles with a radius of around 100 nm. The thermal behavior of the COFs was further investigated by fast scanning calorimetry. These investigations showed that both COFs undergo a glass transition. The glass transition temperature of CPSF-EtO is found to be ca. 100 K higher than that for CPSF-MeO. This large difference in the glass transition is discussed to be due to a change in the interaction of the COF sheets induced by the longer ethoxy group. It might be assumed that for CPSF-EtO more individual COF sheets assemble to larger stacks than for CPSF-MeO. This agrees with the much larger surface area value found for CPSF-EtO compared to CPSF-MeO. To corroborate the results obtained be fast scanning calorimetry dielectric measurements were conducted which confirm the occurrence of a dynamic glass transition. The estimated temperature dependence of the relaxation rates of the dielectric relaxation and their absolute values agrees well with the data obtained by fast scanning calorimetry. Considering the fragility approach to the glass transition, it was further found that CPSF-MeO is a fragile glass former whereas CPSF-EtO behaves as a strong glass forming material. This difference in the fragility points also to distinct differences in the interaction between the 2D COF molecules in both materials.
Der Vortrag gibt einen Überblick über die vielfältigen Möglichkeiten der Oberflächenfunktionalisierung mittels Mikro- und Nanostrukturierung durch Ultrakurzpuls-Lasermaterialbeabeitung. Dies schließt eine Diskussion des Phänomens der Laser-induzierten periodischen Oberflächenstrukturen (LIPSS, engl.: Laser-induced Periodic Surface Structures, Ripples), sowie deren Klassifikation und Bildungsmechanismen mit ein. Ein Schwerpunkt der Präsentation liegt auf der Diskussion verschiedener Anwendungsmöglichkeiten der LIPSS in Bereichen der Optik, Fluidik, Tribologie und Medizin, sowie auf einem Ausblick auf die industrielle Skalierbarkeit der LIPSS-Technologie.
Zirconium chloro fluoride as catalyst for C-F bond activation and HF transfer of fluoroalkanes
(2024)
In this work1, we have successfully synthesised amorphous zirconium chloro fluoride (ZCF), which exhibits medium lewis acidity. In addition to investigating the local coordination sphere around the Zr atoms and the material properties, we were able to establish a catalytic behavior of ZCF in C-F bond activation reactions. We present the first heterogeneous catalyst that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
Trinamic TMCL IOC is a Python package designed for controlling stepper motors connected to a Trinamic board using the TMCL language (all boards supported by PyTrinamic should now work, has been tested on the TMCM 6110 and the TMCM 6214). Since it is implementing the TMCL protocol, it should be easy to adapt to other Trinamic motor controller boards. This package assumes the motor controller is connected over a machine network via a network-to-serial converter, but the underlying PyTrinamic package allows for other connections too.
This allows the control of attached motors via the EPICS Channel-Access virtual communications bus. If EPICS is not desired, plain Pythonic control via motion_control should also be possible. An example for this will be provided in the example.ipynb Jupyter notebook.
This package leverages Caproto for EPICS IOCs and a modified PyTrinamic library for the motor board control, and interfaces between the two via an internal set of dataclasses. Configuration for the motors and boards are loaded from YAML files (see tests/testdata/example_config.yaml).
The modifications to PyTrinamic involved extending their library with a socket interface. This was a minor modification that should eventually find its way into the official package (a pull request has been submitted).
Interactions between a polymer and a substrate interface play a vital role in understanding the improvement in thin film material properties as well as serving as a model for nanocomposites. For any non-repulsive polymer-substrate interactions, polymer segments form an irreversibly adsorbed layer and show a slowdown in the glassy dynamics and thus an increase in the thermal glass transition temperature compared to the bulk-like values. The growth kinetics of the adsorbed layer showed a deviation for both poly (bisphenol-A carbonate) (PBAC) and polysulfone (PSU), two bulky polymers containing a functional group (phenyl ring) in the backbone.
This presentation highlights ongoing scientific misconduct as found in academic literature. This includes data- and image manipulation, and paper mills. Starting with an expose of examples, it delves deeper into the causes and metrics driving this phenomenon. Finally a range of possible tools is presented, that the young researcher can use to prevent themselves from sliding into the dark scientific methods.
By automatically recording as much information as possible in automated laboratory setups, reproducibility and traceability of experiments are vastly improved. This presentation shows what such an approach means for the quality of experiments in an X-ray scattering laboratory and an automated synthesis set-up.
Kemnitz et al. developed a fluorolytic route to access metal fluorides 2 such as AlF3 3 and MgF2 4 which possess a high surface area. In aluminium-based systems, the synthetic approach led to amorphous xerogels that can be further converted into Lewis superacids.3 Still, despite zirconium oxide being described as a stronger Lewis acid than other metal oxides 4 zirconium fluoride-based materials have only recently been reported or investigated. 6 In this work we extend the class of amorphous Lewis acidic heterogeneous catalysts to an amorphous ZrF4 that is active in C-F bond activation.
Nanoparticles (NPs) are tiny – around 1 to 100 billionths of a meter – and can have different chemistries and behaviours than the same material of larger size. This property has led to advances in a wide range of industries, but it can also confer toxicity. Size measurements are the main way NPs are identified but a lack of standardised methods for identifying ones with complex shapes has hindered evaluation of their potential harm.
Amorphous materials play an important role in C-F bond activation but face the difficulty of limited available structural information by methods such as powder XRD and solid-state MAS NMR spectroscopy especially if the nucleus is not abundant enough. Here, we present heterogeneous catalysts, active in C-F bond activation, where EXAFS allowed specifically elucidating the local structure, which would have not been possible elsewise.
Bakterielle Biofilme stellen in medizinischen und industriellen Bereichen ein ernsthaftes Problem dar. Eine der größten gesellschaftlichen Herausforderungen liegt in der zunehmenden Resistenz von Bakterien gegen Biozide, die bei antimikrobiellen Behandlungen eingesetzt werden, z.B. durch übermäßigen Einsatz in Medizin, Industrie und Landwirtschaft oder durch Reinigung und Desinfektion in Privathaushalten. Daher sind neue effiziente bakterienabweisende Strategien, die den Einsatz von Bioziden vermeiden, dringend erforderlich.
Ein vielversprechender Weg zur Erzielung bakterienabweisender Oberflächen liegt in der berührungslosen und aseptischen großflächigen Laserbearbeitung von technischen Oberflächen. Maßgeschneiderte Oberflächentexturen, ermöglicht durch verschiedene Laserbearbeitungsstrategien, die zu topographischen Skalen im Bereich von Nanometern bis Mikrometern führen, können eine Lösung für diese Herausforderung darstellen.
In dem Vortrag wird ein Überblick über den aktuellen Stand der Technik bei der subtraktiven Texturierung von Laseroberflächen zur Kontrolle der Biofilmbildung bei verschiedenen Bakterienstämmen und in unterschiedlichen Umgebungen gegeben. Auf der Grundlage spezifischer Eigenschaften von Bakterien und laserbearbeiteten Oberflächen werden die Herausforderungen antimikrobieller Oberflächendesigns erörtert und zukünftige Richtungen aufgezeigt.
The LOBSTER (Deringer et al., 2011;Maintz et al., 2013 ,2016 ;Nelson et al., 2020 ) software aids in extracting quantum-chemical bonding information from materials by projecting the plane-wave based wave functions from density functional theory (DFT) onto an atomic orbital basis. LobsterEnv, a module implemented in pymatgen (Ong et al., 2013) by some of the authors of this package, facilitates the use of quantum-chemical bonding information obtained from LOBSTER calculations to identify neighbors and coordination environments. LobsterPy is a Python package that offers a set of convenient tools to further analyze and summarize the LobsterEnv outputs in the form of JSONs that are easy to interpret and process. These tools enable the estimation of (anti) bonding contributions, generation of textual descriptions, and visualization of LOBSTER computation results. Since its first release, both LobsterPy and LobsterEnv capabilities have been extended significantly. Unlike earlier versions, which could only automatically analyze Crystal Orbital Hamilton Populations (COHPs) (Dronskowski & Blöchl, 1993), both can now also analyze Crystal Orbital Overlap Populations (COOP) (Hughbanks & Hoffmann, 1983) and Crystal Orbital Bond Index (COBI) (Müller et al., 2021). Extracting the information about the most important orbitals contributing to the bonds is optional, and users can enable it as needed. Additionally, bonding-based features for machinelearning (ML) studies can be engineered via the sub-packages “featurize” and “structuregraphs”. Alongside its Python interface, it also provides an easy-to-use command line interface (CLI) that runs automatic analysis of the computations and generates a summary of results and publication-ready figures. LobsterPy has been used to produce the results in Ngo et al. (2023), Chen et al. (2024), Naik et al. (2023), and it is also part of Atomate2 (2023) bonding analysis workflow for generating bonding analysis data in a format compatible with the Materials Project (Jain et al., 2013) API.
Der Vortrag gibt einen Überblick über die Erzeugung und Charakterisierung anisotroper Nanostrukturen mittels ultrakurzgepulster Laserstrahlung. Besonderes Augenmerk liegt dabei auf dem Phänomen der sogenannten Laser-induzierten periodischen Oberflächen-Nanostrukturen auf dielektrischen Werkstoffen und ihrer zeitlichen Dynamik. Weitere Beispiele von Volumen-Nanostrukturen aus der Literatur werden diskutiert.
Bonds and local atomic environments are crucial descriptors of material properties. They have been used to create design rules and heuristics and as features in machine learning of materials properties. Implementations and algorithms (e.g., ChemEnv and LobsterEnv) for identifying local atomic environments based on geometrical characteristics and quantum-chemical bonding analysis are nowadays available. Fully automatic workflows and analysis tools have been developed to use quantum-chemical bonding analysis on a large scale. The lecture will demonstrate how our tools, that assess local atomic environments and perform automatic bonding analysis, help to develop new machine learning models and a new intuitive understanding of materials.[5,6] Furthermore, the general trend toward automation in density functional-based materials science and some of our recent contributions will be discussed.
The main objective was to assess homogeneity of two bimodal gold materials, namely nPsize1 and nPSize2, containing approximately 1:1 and 10:1 particle number-based ratio of ~30nm and ~60nm particles. Particle number-based concentration within the two size fractions was determined with spICP-MS using the particle frequency method of calibration.
Crystalline materials that exhibit reversible mechanical responses upon exposure to external stimuli have garnered significant attention owing to their potential applications in various fields. Herein, we report a crystal of (2Z,2′Z)-2,2′-(1,4-phenylene)bis(3-(4-bromophenyl)acrylonitrile) (DSBr), which displays simultaneous elasto-plastic behaviour and reversible thermosalient effects. While elasto-plastic behaviour is attributed to underlying packing features, reversible thermosalient expansion is attributed to uniaxial expansion mediated by heat. Exceptional length increase and contraction upon cooling is due to the restorative nature of weak interactions through a cooperative effect. The cooperative movement of molecules is reflected in the unidirectional expansion of the habit plane. Thermosalient reversible expansion–contraction in elasto-plastic crystals have not been discussed in the literature so far. Detailed analysis reported herein provides a comprehensive understanding of the underlying mechanism of flexibility and thermosalient responses. This crystal's unique blend of reversible thermal expansion with flexibility holds substantial promise for applications in flexible thermal actuators.
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a “chaotic” (rough) surface from an aperiodic into a periodic structure.
Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to pronounced physical aging. In this study a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO were incorporated as a nanofiller (concentration range 0-10 wt%) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on aggregate level with domains up to 100 nm as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller.
As the molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method the gas permeability and the permselectivity were determined for N2, O2, CH4 and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50 % increase compared to pure PIM-1) was observed for a concentration of 5 wt% of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt%.
This study investigates the mechanochemical reactions between AgBr 3-picolylamine and 4-picolylamine. The use of different stoichiometry ratios of the reagents allows [(AgBr)(n-pica)]n and [(AgBr)2(n-pica)]n to be obtained, and we report the new structures of [(AgBr)2(3-pica)]n and [(AgBr)2(4-pica)]n which are characterized by the presence of the following: (a) infinite inorganic chains, (b) silver atom coordinated only by bromide atoms and (c) argentophilic interactions. Furthermore, we studied the interconversion of [(AgBr)(n-pica)]n/[(AgBr)2(n-pica)]n by mechanochemical and thermal properties. The in situ experiments suggest that [(AgBr)(3-pica)]n is kinetically favoured while [(AgBr)2(3-pica)]n is converted into [(AgBr)(3-pica)]n only with a high excess of the ligand. Finally, the liquid nature of the ligands is not sufficient to assist the grinding process, and the complete reaction is observed with the addition of a small quantity of acetonitrile.
Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
The cleaning of aged silk fibers poses a common challenge in the conservation of textiles, since traditional cleaning techniques often yield unsatisfactory results or even harm objects. In this regard, cleaning objects with laser radiation is a promising addition to the range of available methods. Due to it being contactless, even brittle and touch-sensitive objects with disfiguring or harmful soiling could potentially be cleaned and therefore made accessible for research and presentation. Examples of treatment have sometimes shown spectacular results. Still there is some skepticism concerning the safety of this treatment for textile materials, which has been strengthened through previous 532 nm wavelength nanosecond laser cleaning studies on silk fibers. Taking these published results into account, the range of examined laser parameters has been extended in this study, from 532 nm nanosecond laser to 1064 nm nanosecond and even 800 nm femtosecond laser, reevaluating the effect of this treatment on the fibers. The physicochemical processes taking place on the silk fibers when cleaning with lasers are complex and still not fully understood. The aim of this project was therefore to bring more clarification about potential effects of those processes on the condition of silk samples treated with a set of different parameters for wavelength, pulse duration, energy density and number of pulses per spot. It also looks at the influence of the presence of soiling on the results. The analysis of potential effects was then carried out using statistical methods and advanced analytics. Scanning electron microscopy, Fourier-transform infrared spectroscopy and colorimetry technology provided the required insights to better assess the effects. Results show that laser cleaning of silk fibers, like most other conventional cleaning techniques, is not completely without risk, but knowing what the possible effects are helps making decisions on whether the benefits of the technique used justify these risks.
The 2-methoxyphenol units (G-units) in lignin are modified by demethylation and oxidation to provide the activated lignin as one part of an advanced biobased two-component (2K) adhesive system, which exhibits promising shear strengths in dry and underwater applications. The activation of lignin is straightforward and generates quinones via demethylation and periodate oxidation. These act as Michael acceptors and react smoothly with multi-thiol-star polymers to yield thiol-catechol connectivities (TCCs). The mussel-inspired material platform acts as a very robust and versatile adhesive, combining low-cost and readily available lignin with multi-thiols to achieve outstanding adhesion strengths of up to 15 MPa in dry application. In particular, the 2K system is compatible with the marine biological environment and shows no acute toxicity to sensitive organisms such as fish eggs. Thus, one possible application of this material could be an adhesive for setting temperature-resistant corals in damaged reefs.
Luminescence lifetimes are an attractive analytical method for detection due to its high sensitivity and stability. Iridium probes exhibit luminescence with long excited-state lifetimes, which are sensitive to the local environment. Perfluorooctanoic acid (PFOA) is listed as a chemical of high concern regarding its toxicity and is classified as a “forever chemical”. In addition to strict limits on the presence of PFOA in drinking water, environmental contamination from industrial effluent or chemical spills requires rapid, simple, accurate, and cost-effective analysis in order to aid containment. Herein, we report the fabrication and function of a novel and facile luminescence sensor for PFOA based on iridium modified on gold surfaces. These surfaces were modified with lipophilic iridium complexes bearing alkyl chains, namely, IrC6 and IrC12, and Zonyl-FSA surfactant. Upon addition of PFOA, the modified surfaces IrC6-FSA@Au and IrC12-FSA @Au show the largest change in the red luminescence signal with changes in the luminescence lifetime that allow monitoring of PFOA concentrations in aqueous solutions. The platform was tested for the measurement of PFOA in aqueous samples spiked with known concentrations of PFOA and demonstrated the capacity to determine PFOA at concentrations >100 μg/L (240 nM).
Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein.
Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein.
Die Material Acceleration Platform der BAM (MAPz@BAM) bündelt unsere Automatisierungs-Expertise auf dem Gebiet der Materialwissenschaft und -prüfung. Wir entwickeln modulare Experimentmodule, automatische Prüf- und Auswerteverfahren und setzen künstliche Intelligenz für eine effiziente und autonome Versuchsplanung, - vorhersage und Datenanalyse ein.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.
Die Laserbearbeitung von Materialien mit ultrakurzen Laserpulsen kann zu einer sekundären Emission gefährlicher Röntgenstrahlen führen. Dieser Effekt wurde bisher bei der Bearbeitung von technischen Materialien wie Metallen beobachtet. Die Röntgenemission bei der abtragenden Bearbeitung von biologischen Geweben ist noch weitgehend unerforscht. Der Vortrag präsentiert erste Untersuchungen und Ergebnisse des radiologischen Gefährdungspotentials bei der medizinischen Anwendung von Ultrakurzpulslasern am Menschen.
The efficient exploration of novel alloy compositions is crucial for advancing the development of new materials. One widely utilized approach for creating phase diagrams is the use of diffusion-controlled synthesis for gradient alloys. This method is also an effective means for rapidly identifying potential material combinations.
The present study focusses on the exploration of quaternary multi-principle-element alloys (MPEAs) using diffusion multiples. We established a diffusion system by combining an equimolar ternary alloy (FeNiCr) with single diffusing elements Mn and Mo. Using ThermoCalc simulations, we determined suitable temperature ranges where we can expect the formation of single-phase alloys. Depending on the diffusion constants of the selected metals, diffusion times were adjusted to obtain diffusion zones with a depth of greater than 50 μm. Microstructural and compositional information was gathered via scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) and correlated to local mechanical properties evaluated by means of nanoindentation. Local corrosion properties were examined using Atomic Force Microscopy (AFM) and Scanning Electrochemical Microscopy (SECM).
Our results indicate that the ThermoCalc simulations have a good predictive power for crystallographic phases. However, especially with the Mn-FeNiCr system, formation of Cr-rich secondary phases were observed, which led to Cr-depletion and thus to localized corrosion processes in the matrix at the vicinity of the secondary phases. Based on the results of the local electrochemical tests, we have selected single-phase compositions along the diffusion zone and synthesized these alloys in bulk for corrosion studies by means of potentiodynamic polarization and SECM.
The presentation will summarize our methodology using diffusion couples as an
efficient tool for exploring compositional spaces of MPEAs in the search for novel single-phase alloys and the results of our correlative study on the mechanical and corrosion properties of these materials.
The efficient exploration of novel alloy chemistries is crucial for advancing the development of new materials. Diffusion-controlled synthesis of gradient alloys is an intelligent approach for creating phase diagrams and to effectively identify potential material combinations with tailored properties.
This project focusses on the design of quaternary multi-principle-element alloys (MPEAs) using diffusion couples. Our diffusion system contains an equimolar ternary alloy (FeNiCr) and additional single diffusing elements e.g. Mn and Mo. We determined the optimal temperature ranges for the diffusion thermal treatment by means of ThermoCalc simulations with the aim to form single-phase MPEAs. Microstructure and chemical characterization of the diffusion couples were performed by means of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). For most alloy couples, the diffusion zone contained a single-phase alloy matrix with diffusion-induced compositional gradient as well as precipitation phases. This heterogeneity makes the diffusion couples interesting materials to investigate local mechanical and corrosion properties. Thus, local corrosion properties were examined using Atomic Force Microscopy (AFM) and Scanning Electrochemical Microscopy (SECM). Nanoindentation was used for the analysis of local mechanical properties.
Based on the results of the local corrosion analysis, we have selected single-phase alloy chemistries along the diffusion zone and reproducibly synthesized these alloys in bulk for detailed corrosion studies by means of potentiodynamic polarization and SECM.
The presentation will briefly summarize our methodology and motivation for using diffusion couples as an efficient tool for exploring phase diagrams of MPEAs in the search for new alloy chemistries and the results of our correlative study on the mechanical and corrosion properties of these materials.
Old materials, new life: Using diffusion-controlled synthesis for discovery of novel alloy systems
(2023)
Multi principal element alloy (MPEAs) concept allows us to rethink how we develop application-tailored, sustainable materials. The vast composition space leads to nearly indefinite material combinations and will facilitate finding Pareto optimal materials with lower CO2 footprint and avoidance of critical minerals as design criteria. To probe this large compositional space efficiently, the use high-throughput screening methods is inevitable. Diffusion-controlled synthesis of gradient materials is the optimal technique for screening complex compositional materials that would otherwise require comprehensive modelling or experimental efforts.
In this study, we have used a series of diffusion couples of pure metals and alloys with the aim to create a materials library with correlated data on composition and microstructure. With future recycling prospects in mind, and possible applications of Cu containing alloys in electrocatalytic carbon dioxide reduction and antimicrobial alloys we have generated diffusion couples of brass (Cu63Zn37) and bronze (Cu89Sn11) with either pure metals (Fe, Ni, etc.) or with binary or ternary alloys (FeNi, FeNiCr etc.). For different diffusion times and temperatures, we calculated diffusion constants for the material combinations. Following a detailed characterisation of the gradient materials, we have investigated general and local corrosion properties, electrocatalytic activity for oxygen evolution reaction (OER) and carbon dioxide reduction reaction (CRR) as well as mechanical properties (hardness, elastic modulus) on single-phase alloys synthesized in bulk by means of vacuum arc-melting based on the selected local compositions.
In most cases, due to the short diffusion times, the contact between the diffusion couples lead to two separate diffusion zones and thus, different alloy families on both sides. Especially with ternary alloys, interesting selective diffusion processes and unexpected repulsion effects were observed. The presentation will provide an overview of the gradient materials with a focus on the functional properties of single-phase alloy families derived from them.
Due to their favorable mechanical and anti-corrosion properties, medium entropy alloys (MEA) are of high academic and industrial interest as novel materials for engineering and catalytic applications. Previous studies on general corrosion behavior indicate high current densities at high anodic potentials for MEAs. Further investigations of the underlying transpassive dissolution and local corrosion behavior remain scarce.
To understand the passivation behavior of MEAs CrCoNi and FeCrNi at high anodic potentials, the mechanisms of transpassive dissolution and the oxygen evolution reaction were investigated in this project. Scanning electrochemical microscopy (SECM) was applied in the interrogative mode for the detection of evolving metal species and oxygen. By means of ICP-MS analysis, dissolved metal species were quantified to provide a fundamental understanding on the transpassive dissolution. As the oxygen evolution reaction (OER) may contribute a large percentile to the observed current at high anodic potentials, SECM measurements were employed to analyze the onset of the OER. Potentiodynamic, potentiostatic and chronoamperometric techniques as well as different electrolytes were used to induce precisely controlled corrosion loads during the SECM experiments and for the ICP-MS analysis. Macroscopic corrosion properties of the alloys, electrical and chemical properties of the passive films were studied by means of potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and X-Ray Photoelectron Spectroscopy (XPS), respectively.
Finally, the analysis of the corrosion morphology and the potential of the surface before, during and after passivity breakdown was carried out by means of in-situ atomic force microscopy (AFM) and scanning Kelvin probe force microscopy (SKPFM). The presentation will summarize our results on the interplay of anodic passivation and oxygen evolution of MEAs in aqueous NaCl electrolytes.
The high-throughput synthesis and characterization of potential material combinations plays an important role in accelerating the development of new materials. Diffusion controlled synthesis of gradient alloys is widely used to create phase diagrams, and it is also one of the most effective combinatorial approaches for rapid realization of potential material combinations.
This study focuses on the synthesis and investigation of the quaternary multi-principle-element alloy (MPEA) FeNiCrMn by means of diffusion multiples, the correlation of their microstructural and chemical characterization data with their application relevant properties like local mechanical and corrosion properties. A diffusion system was set up by combining an equimolar ternary alloy (FeNiCr) with a single diffusing metallic component (Mn) with the highest interdiffusion coefficient. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to collect microstructural and compositional information which were correlated to local mechanical properties studied with nanoindentation. Local corrosion properties were investigated by means of Atomic Force Microscopy (AFM) and Scanning Electrochemical Microscopy (SECM). We have observed that a >50 μm deep homogeneous diffusion zone was formed the thickness of which scales with the duration of the thermal treatment. Beyond the Mn-concentration gradient in the FeNiCr matrix, a distinct Cr-rich secondary phase, characterized by high hardness and elastic modulus values appeared. We synthesized MPEAs with selected compositions from the diffusion zone as well as the Cr-rich phase as bulk alloys for electrochemical corrosion studies under different environmental conditions. The presentation will summarize the results of our correlative study on the mechanical properties and corrosion resistance of the quaternary multi-principle-element alloy (MPEA) FeNiCrMn family.
The motivation and overall objective of the project are to develop electrocatalysts that are free of noble metals (e.g., Pt or Au) and are instead based on medium and high entropy alloys (MEA\HEA) of transition metals for the electrochemical reduction of CO2.
The MEA\HEA are multi principal element alloys (MPEAs) consisting of more than three elements with almost equal alloying proportions, forming solid solutions without intermetallic phases. In such a crystal structure, the individual elements are well mixed, and each atom has different nearest neighbours. In catalysis, especially in selectivity, it is precisely this atomic chaos that matters. Due to the large number of possible combinations of elements, these materials offer excellent conditions to tune their functional properties for specific applications.
Especially, catalyst systems in which Cu is combined with another metallic component show a significant increase in catalytic efficiency compared to monometallic systems. Since the catalytic activity, selectivity, and stability of electrocatalysts strongly depend on the size and surface, systematic studies on the influence of the organic stabilizers on heterogeneous catalysis are also of interest.
The focus of this project is to design Cu-based MEA\HEA electrocatalysts on the atomic level. For this purpose, base alloys will be prepared, processed into high-purity nanoparticles by pulsed laser ablation, and tested as electrocatalysts.
Multi-principal element alloy (MPEA) nanoparticle electrocatalysts have the potential to provide a cost-effective and efficient alternative to noble metal electrocatalysts. The chemically complex nature and the high configurational entropy of MPEAs offer advantages in tailoring catalytic activity, product selectivity, and improved stability under harsh reaction conditions. Cu-containing bimetallic catalyst systems have already been demonstrated to lead to a significant increase in catalytic efficiency compared to monometallic systems. Thus, this project aims at the design of Cu-containing MPEAs and nanoparticle electrocatalysts for carbon dioxide reduction reaction.
In this project, base alloys were prepared by means of arc melting with subsequent homogenization treatments and processed by pulsed laser ablation in water and organic solvents into high-purity nanoparticles. The nanoparticles were characterized by means of transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). Electrochemical testing was performed both on bulk alloy samples and nanoparticle film coated glassy carbon electrodes by means of cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Nanoparticle coated electrodes have been investigated by means of atomic force microscopy (AFM) and scanning kelvin probe force microscopy (SKPFM) to assure a homogeneous distribution on the electrode surface. The presentation will summarize our initial results on the electrocatalytic activity of Cu-MPEA system for carbon dioxide reduction.