Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Zeitschriftenartikel (363) (entfernen)
Sprache
- Englisch (363) (entfernen)
Schlagworte
- Laser beam welding (40)
- Additive manufacturing (37)
- Microstructure (23)
- Wear (22)
- Mechanical properties (18)
- Welding (17)
- Friction (16)
- Residual stresses (15)
- Hydrogen (14)
- Residual stress (14)
- Laser metal deposition (13)
- Laser powder bed fusion (12)
- Additive Manufacturing (11)
- High-strength steels (9)
- Niobium carbide (8)
- Solidification cracking (8)
- Ultrasonic-assisted milling (8)
- Cyclic R-curve (7)
- Fatigue crack propagation threshold (7)
- Fracture mechanics (7)
- Laser implantation (7)
- Laser welding (7)
- Resistance spot welding (7)
- Creep-resistant steel (6)
- DED (6)
- Fatigue (6)
- Heat treatment (6)
- Hybrid laser-arc welding (6)
- Neutron diffraction (6)
- Process monitoring (6)
- Steel (6)
- TIG welding (6)
- Thermography (6)
- AFM (5)
- Artificial neural network (5)
- Crack (5)
- Fatigue strength (5)
- GMA welding (5)
- High-strength steel (5)
- Hydrogen assisted cracking (5)
- Liquid metal embrittlement (5)
- Mechanical Engineering (5)
- Mechanics of Materials (5)
- Nickel (5)
- Numerical modeling (5)
- Numerical simulation (5)
- Porosity (5)
- Selective laser melting (SLM) (5)
- Simulation (5)
- Surface integrity (5)
- Thick-walled steel (5)
- Tribology (5)
- AISI 316L (4)
- Cermet (4)
- Critical strain (4)
- Diffusion (4)
- Fatigue crack growth (4)
- Hardness (4)
- Heat accumulation (4)
- Hot cracking (4)
- Hot stamping (4)
- Hybrid laser arc welding (4)
- Inconel 718 (4)
- L-PBF (4)
- LIBS (4)
- Laser Powder Bed Fusion (4)
- Laser powder bed fusion (L-PBF) (4)
- Post weld heat treatment (4)
- Process parameters (4)
- Solidification (4)
- Stress relief cracking (4)
- Submerged arc welding (4)
- Ti-6Al-4V (4)
- Weld pool shape (4)
- Welding simulation (4)
- 9%Ni steel (3)
- AGIL (3)
- Alloy 36 (3)
- Atomic force microscopy (3)
- Chemical composition (3)
- Crack closure (3)
- Cracking (3)
- Deep penetration (3)
- Defects (3)
- Diffusible hydrogen (3)
- Digital image correlation (3)
- Dimensional accuracy (3)
- Directed energy deposition (3)
- Dissimilar metal weld overlays (3)
- Distortion (3)
- Electron backscattered diffraction (3)
- Electron beam welding (3)
- Element transport (3)
- Fatigue crack propagation (3)
- Fracture (3)
- Grain size (3)
- High power laser beam welding (3)
- In situ measurement (3)
- In situ monitoring (3)
- Infrared thermography (3)
- Kitagawa-Takahashi diagram (3)
- Laser hybrid welding (3)
- Lubricants (3)
- Magnetic field (3)
- Magnetohydrodynamics (3)
- Mechanical mismatching (3)
- Metals and Alloys (3)
- Multi-physical modelling (3)
- Neutron imaging (3)
- Niobium carbide (NbC) (3)
- Numerical modelling (3)
- Polymers (3)
- Process simulation (3)
- Quality assurance (3)
- Restraint (3)
- Sintering (3)
- Surface modification (3)
- Surface texturing (3)
- Temperature (3)
- TiB2 (3)
- Tool wear (3)
- Weldments (3)
- 316L (2)
- AISI 304L (2)
- AISI D2 (2)
- Additive manufacturing (AM) (2)
- Advanced high strength steels (2)
- AlSi10Mg (2)
- Alloy modification (2)
- Alumina (2)
- Aluminum alloys (2)
- Archard's law (2)
- Austenite-to-martensite transformation (2)
- Bragg-edge imaging (2)
- Bulge effect (2)
- Carbon steel (2)
- Carrier gas hot extraction (2)
- Circumferential weld (2)
- Coarse-grained heat-affected zone (2)
- Cold cracking (2)
- Component assessment (2)
- Composites (2)
- Computed Tomography (2)
- Computed tomography (2)
- Constraint (2)
- Contact resonance (2)
- Cryogenic temperature (2)
- Crystallographic texture (2)
- Cutting tool (2)
- Damage tolerance (2)
- Data preparation (2)
- Debye–Waller factor (2)
- Deuterium (2)
- Directed Energy Deposition (2)
- Dual phase steel (2)
- Duplex AISI 2205 (2)
- Duplex stainless steel (2)
- EBSD (2)
- Electromagnetic forces (2)
- Electromagnetic weld pool support (2)
- End crater (2)
- Endurance limit (2)
- Equivalent heat source (2)
- Fatigue limit (2)
- Finite element method (2)
- Finite element simulation (2)
- Force-distance curves (2)
- Fracture resistance (2)
- Friction stir welding (2)
- Full penetration (2)
- Gap bridgeability (2)
- Gas tungsten arc welding (GTAW) (2)
- General Materials Science (2)
- Grain refinement (2)
- Hardmetal (2)
- Heat conduction (2)
- Heat control (2)
- Heat-affected zone (2)
- High entropy alloy (2)
- High strength steel (2)
- High strength steels (2)
- High-entropy alloy (2)
- High-power laser beam welding (2)
- Hot crack (2)
- Hot steam (2)
- Hot-Stamping (2)
- Hydrogen embrittlement (2)
- Hydrogen-assisted cracking (2)
- IN718 (2)
- Implant test (2)
- In situ (2)
- Inter layer time (2)
- Joining dissimilar materials (2)
- Keyhole dynamics (2)
- LMD (2)
- LTT weld filler materials (2)
- Laser beam melting (LBM) (2)
- Laser dispersing (2)
- Laser energy distribution (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Localized laser dispersing (2)
- Low heat input GMA welding (2)
- Low transformation temperature (LTT) steel (2)
- Machining (2)
- Martensite (2)
- Matching ferritic welding electrode (2)
- Medium entropy alloy (2)
- Melt pool dynamics (2)
- Metal mixing (2)
- Microstructure and texture (2)
- Microstructure characterization (2)
- Multiple cracks (2)
- NbC (2)
- Neutron radiography (2)
- Nickel alloys (2)
- Non-metallic inclusions (2)
- Numerical process simulation (2)
- Offshore (2)
- Optical flow (2)
- Oxidation (2)
- Partial penetration (2)
- Plasma-transferred arc welding (2)
- Plastic deformation (2)
- Pores (2)
- Post-weld heat treatment (2)
- Preheating (2)
- Properties (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Repair-welding (2)
- Representative specimens (2)
- Residual Stress (2)
- Residual stress analysis (2)
- S-N curve (2)
- SEM (2)
- SIMS (2)
- Scattering (2)
- Seam geometry (2)
- Selective Laser Melting (SLM) (2)
- Selective laser melting (2)
- Short cracks (2)
- Single pass welding (2)
- Sliding (2)
- Small-scale specimens (2)
- Software (2)
- Solid lubricants (2)
- Stainless Steel (2)
- Stainless steels (2)
- Steel and aluminium (2)
- Surface roughness (2)
- Surface structuring (2)
- TPU (2)
- Temperature distribution (2)
- Tensile properties (2)
- Thermal cycles (2)
- Thermal history (2)
- Titanium (2)
- ToF-SIMS (2)
- Toughness (2)
- Tribofilm (2)
- Vacuum (2)
- Varestraint testing (2)
- Weld pool dynamics (2)
- Welded joints (2)
- Welding residual stresses (2)
- Wire arc additive manufacturing (2)
- X38CrMoV5-3 (2)
- μCT-analysis (2)
- 100Cr6 (1)
- 100Cr6 (AISI 52100) steel (1)
- 100Cr6 steel (1)
- 2101 duplex stainless steel (1)
- 3D Scanning (1)
- 3D printing (1)
- 3D-finite element modeling (1)
- AC magnetic field (1)
- ADXRD (1)
- AHSS (1)
- AISI 321 stainless steel (1)
- AM (1)
- AM 316L stainless steel (1)
- AM feature integration (1)
- ASTM (1)
- ASTM E647 (1)
- Abrasion (1)
- Abrasive wear (1)
- Absorbed energy (1)
- Accelerator magnets (1)
- Accoustic emission (1)
- Adaptive control (1)
- Adaptive remeshing (1)
- Adaptive welding beam oscillation (1)
- Additive Manufacturing (AM) (1)
- Additives (1)
- Adhesion (1)
- Adhesion by mechanical interlocking (1)
- Adsorption (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high strength steel (1)
- Advanced high-strength steel (1)
- Advanced high-strength steels (1)
- Aging (1)
- Al/Ti dissimilar joints (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg alloy (1)
- Alkyd resin-based coating (1)
- Alloys (1)
- Alternative test procedure (1)
- Aluminium oxide (1)
- Aluminum bronze (1)
- Analysis (1)
- Analytical calculation (1)
- Applications (1)
- Artificial Intelligence (1)
- As-built LPBF IN718 alloy (1)
- Atomic force microscope (1)
- Austenitic (1)
- Austenitic stainless steels (1)
- Austenitic welding electrode (1)
- Automotive application (1)
- Backlight (1)
- Bayesian technique (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Behavior (1)
- Bending test (1)
- Binders (1)
- Biopolymers (1)
- Bismuth titanates (1)
- Boundary element method (1)
- Boundary lubrication (1)
- Bragg-edge neutron 2D imaging (BENI) (1)
- Brazil nut Mesocarp (1)
- Build-up strategy (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effect (1)
- Bulging effects (1)
- Burst (1)
- CCT diagrams (1)
- CFD model (1)
- Cantilever microprobe (1)
- Carbide (1)
- Carbon (1)
- Carbon dioxide footprint (1)
- Carbonitride (1)
- Catalysis (1)
- CdSe/ZnS quantum Dots (1)
- Cellular substructure (1)
- Cellular uptake (1)
- Ceramic (1)
- Ceramic matrix composites (1)
- Chapetti’s and IBESS model (1)
- Characterisation (1)
- Characterization (1)
- Characterization of corrosion layers (1)
- Charpy Impact Test (1)
- Charpy Transition Curve (1)
- Charpy impact toughness (1)
- Charpy pendulum impact test (1)
- Chunky graphite (1)
- Cimensional Accuracy (1)
- Clad steels (1)
- Clustering (1)
- Co-Cr-alloy (1)
- Coarse grained heat affected zone (1)
- Coating (1)
- Cobalt-chromium alloy (1)
- Codes and standards (1)
- Coefficient of friction (1)
- Cold cracking safety (1)
- Cold-welding (1)
- Columnar crystal growth (1)
- Component test (1)
- Component-like test (1)
- Composite (1)
- Compositionally complex alloy (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Condensed Matter Physics (1)
- Condition monitoring (1)
- Contact fatigue (1)
- Conversion of results (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Cooling rate (1)
- Coordinate measurement machine (1)
- Core-shell structures (1)
- Corrosion pits (1)
- Crack arrest (1)
- Crack closure effect (1)
- Crack closure mechanisms (1)
- Crack-tip constraint (1)
- Crater (1)
- Creep (1)
- Creep behavior (1)
- Creep resistant steel (1)
- Creep resisting materials (1)
- Creep-resisting materials (1)
- Critical strain rate (1)
- Crown-abutment connection (1)
- Cryogenic steel (1)
- Crystal branch development (1)
- Crystal plasticity (1)
- Crystallographic texture control (1)
- Curve fitting (1)
- Cutting forces (1)
- Cyclic J-integral (1)
- Cyclic R-curve analysis (1)
- Cyclic loading (1)
- Cyclic stress-strain curve (1)
- Cylindrical turning (1)
- D7755-11 (1)
- DED-EB (1)
- DED-arc (1)
- DEM (1)
- DIC (1)
- Damage prediction (1)
- Data evaluation methods (1)
- Data fusion (1)
- Data-driven quality assurance (1)
- Debye-Waller-Faktor (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Defect detection (1)
- Deformation (1)
- Deformed geometry (1)
- Dendrite growth (1)
- Density measurement (1)
- Dental materials (1)
- Deposition rate (1)
- Deposition welding (1)
- Design of experiments (1)
- Diaspore (1)
- Die-cast aluminum (1)
- Die-casted aluminum (1)
- Diffraction (1)
- Diffraction-elastic constants (1)
- Diffusion/diffusivity (1)
- Digital Image Correlation (1)
- Digitalization (1)
- Dilatometry (1)
- Direct energy deposition (1)
- Direct laser deposition (1)
- Dislocation density (1)
- Dispersive XAS (1)
- Displacement (1)
- Dissimilar friction stir welding (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Distortion upon baseplate removal (1)
- Ditigtal image correlation (1)
- Ductile iron (1)
- Duplex (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dwell-time (1)
- Dynamic load (1)
- EA4T steel (1)
- EBAM (1)
- EDS (1)
- Edge quality (1)
- Editorial Board (1)
- Effect of scanning strategies (1)
- Elastic follow-up (1)
- Elastic modulus (1)
- Elastic-plastic fracture mechanics (1)
- Elastomers (1)
- Electrical connectors (1)
- Electro-plated nickel coatings (1)
- Electro-thermomechnical model (1)
- Electrochemical permeation (1)
- Electrode geometry (1)
- Electroless Ni-P (1)
- Electromagnetic (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic influence (1)
- Electromagnetic stirring (1)
- Electromagnetic support (1)
- Electromagnetic supported degassing (1)
- Electromagnetic weld pool support system (1)
- Electron backscatter diffraction (1)
- Electron backscatter diffraction (EBSD) (1)
- Electron microscopy (1)
- Ellipsometry (1)
- Embedded electronics (1)
- Embrittlement (1)
- Emisssivity (1)
- Energetic reference parameter (1)
- Energy parameters of the arc (1)
- Environment (1)
- Environmental conditions (1)
- Environmental effect (1)
- Environmental effects (1)
- Environmental impact categories (1)
- Error sources analysis (1)
- Evaporation (1)
- Experimental design (1)
- Experimental determination (1)
- Experimental procedure (1)
- FAIR data (1)
- FAT class (1)
- FAT class approach (1)
- FEM (1)
- Fail-safe design (1)
- Fast single pulse response (1)
- Fatigue Strength (1)
- Fatigue crack initiation (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue life (1)
- Fatigue loading (1)
- Fatigue propagation threshold (1)
- Fatigue properties (1)
- Fatigue strength and life (1)
- Fatigue tests (1)
- Femtosecond laser (1)
- Femtosecond laser ablation (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic steels (1)
- Ferroelectricity/ferroelectric materials (1)
- Ferromagnetic steels (1)
- Fiber laser (1)
- Filler wire (1)
- Filler wire mixing (1)
- Fine-grained Steel (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (FE) (1)
- Finite element analysis (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flaw assessment procedures (1)
- Flaw detection (1)
- Flaw interaction (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Formation (1)
- Fractography (1)
- Fracture Mechanics (1)
- Fracture assessment (1)
- Frequency domain (1)
- Fresnel reflection (1)
- Fusion Zone (1)
- Fusion zone (1)
- Fusion zone profile (1)
- Fusion zone size (1)
- Fusion zone, nickel alloys (1)
- GMAW (1)
- GMAwelding (1)
- GMR (1)
- GMR sensors (1)
- GTAW (1)
- Galvanized steel (1)
- Gap bridging (1)
- Gas metal arc welding (1)
- Gas shielded arc welding (1)
- General analytical solutions (1)
- Geteilte Infrastruktur (1)
- Gleeble testing (1)
- Global stability criterion (1)
- Grade S960QL steel (1)
- Grain structure (1)
- Graphene oxide (1)
- Graphite modules (1)
- Grease (1)
- Grease lubrication (1)
- Greens function method (1)
- HCF (1)
- HSLA (1)
- HT22 (1)
- Hard metals (1)
- Hardly separable problem (1)
- Hastelloy X (1)
- HeLa (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat affected zone (1)
- Heat flow (1)
- Heat generation (1)
- Heat input (1)
- Heat source models (1)
- High Entropy Alloy (1)
- High brightness (1)
- High power (1)
- High process speeds (1)
- High temperature corrosion (1)
- High-Power Welding (1)
- High-entropy alloys (1)
- High-power fibre laser (1)
- High-power laser beam (1)
- High-pressure hydrogen environment (1)
- High-strength fine-grained steels (1)
- High-strength low-alloy steel (1)
- High-strength steel filler metal (1)
- High-strength steel sheets (1)
- High-strength structural steel (1)
- Highspeed-plasma-laser-cladding (1)
- Hochfester Stahl (1)
- Hold time (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Humidity (1)
- Hybrid Laser Arc Welding (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid repair (1)
- Hybrid welding (1)
- Hydrogen assisted stress corrosion cracking (1)
- Hydrogen dependent mechanical properties (1)
- Hydrogen diffusion (1)
- Hydrogen measurement (1)
- Hydrogen-containing hot gas (1)
- Hydrophobin (1)
- IBESS (1)
- IBESS Approach (1)
- IBESS model for short cracks (1)
- IN 718 (1)
- IN718 PBF-LB/M (1)
- IN725 (1)
- ISO 12108 (1)
- ISO 3690 (1)
- Image processing (1)
- Image registration (1)
- Impact absorbed energy (1)
- Impact damage (1)
- Implant-supported prostheses (1)
- Implants (1)
- In situ strain (1)
- In-situ Process Monitoring (1)
- In-situ process monitoring (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inclusions (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Initial crack size (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter-layer time (1)
- Interfacial stability (1)
- Intergranular cracking (1)
- Intrinsic fatigue propagation threshold (1)
- Iron (1)
- Iron aluminide (1)
- Joining technology (1)
- Journal (1)
- Keyhole collapse (1)
- Keyhole mode welding (1)
- Keyhole stability (1)
- Kitagawa-Takahashi (K-T) diagram (1)
- L-PBF IN718 material (1)
- LA-ICP-SFMS (1)
- LCF (1)
- LCF region (1)
- LIBS TIG welding (1)
- LME (1)
- LPBF (1)
- LTT Weld Filler Materials (1)
- LTT filler metal (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Laboratory X-ray diffraction (1)
- Lack-of-fusion (1)
- Lamé curves (1)
- Lamé curves approximation (1)
- Large-scale test (1)
- Laser (1)
- Laser Beam Welding (1)
- Laser Implantation (1)
- Laser Metal Deposition (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Welding (1)
- Laser beam melting (1)
- Laser beam welding (LBW) (1)
- Laser cutting (1)
- Laser energy absorption (1)
- Laser keyhole welding (1)
- Laser melting (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser-based additive manufacturing (1)
- Laser-hybrid welding (1)
- Laser-metal-deposition (1)
- Lead-free ceramics (1)
- Life cycle assessment (1)
- Life prediction (1)
- Lifetime (1)
- Liquid Metal Embrittlement (1)
- Liquid Metal Embrittlement (LME) (1)
- Liquid phase sintering (1)
- Local Weld Geometry (1)
- Local critical strain (1)
- Local fatigue spproaches (1)
- Localized Laser Dispersing (1)
- Lorentz force (1)
- Lorentz forces (1)
- Low carbon steel (1)
- Low feed rates (1)
- Low heat input Gma welding (1)
- Low transformation temperature (1)
- Low transformation temperature filler materials (1)
- Low-cycle fatigue (1)
- Lubricant additives (1)
- Lubricated sliding (1)
- L‐PBF (1)
- MAG welding (1)
- MHD (1)
- MVT (1)
- MWIR (1)
- Machine learning (1)
- Machine vision (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Magnetic stray field (1)
- Magnetohydrodynamics (MHD) (1)
- Margin design (1)
- Matching ferritic filler metal (1)
- Material defects (1)
- Material modeling (1)
- Materials database (1)
- Mathematical modeling (1)
- Measurement (1)
- Mechanical Properties (1)
- Mechanical anisotropy (1)
- Mechanical properties of the joints (1)
- Mechanical property (1)
- Mechanical-technological properties (1)
- Medium Entropy Alloys (1)
- Melt pool defects (1)
- Melt pool depth (1)
- Metal (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (MAM) (1)
- Metallic vapour plume (1)
- Micro-shrinkages (1)
- Microalloyed steels (1)
- Microbiologically influenced corrosion (1)
- Microcracking (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Microstructure Tensile strength (1)
- Microtribology (1)
- Mild steels (1)
- Minimum Waiting Time (1)
- Mining head gear (1)
- Mis-match (1)
- Misalignment of edges (1)
- Misfit (1)
- Model calibration (1)
- Model order reduction (1)
- Modeling (1)
- Modelling studies (1)
- Modification of structural morphology (1)
- Molten pool (1)
- Molten pool dynamics (1)
- Molybdenum carbide (1)
- Molybdenum disulphide (1)
- Monotonic and cyclic crack driving force (1)
- Monte-Carlo simulation (1)
- Morphology control (1)
- Multi-materials joining (1)
- Multi-pass welding (1)
- Multi-physical modeling (1)
- Multi-principal element alloy (1)
- Multi-principal element alloys (1)
- Multiple crack initiation (1)
- Multiple crack propagation (1)
- Multiple cracking (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- NIR (1)
- Nanoadditive (1)
- Nanotribology (1)
- Nanowear (1)
- Narrow gap welding (1)
- Natural silver wires (1)
- Near-surface X-ray diffraction (1)
- Near-threshold regime (1)
- Neural networks (1)
- Neutron Diffraction (1)
- Neutron and X-ray diffraction (1)
- Ni alloy (1)
- Ni-based austenitic filler metal (1)
- Ni-based austenitic welding electrode (1)
- Ni-based superalloy (1)
- NiCrBSi (1)
- Nickel-based superalloys (1)
- Niobium alloying (1)
- Non-destructive Materials (1)
- Non-sharp defects (1)
- Novel metrology (1)
- Nuclear reactor systems (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical investigation (1)
- Numerical simulations (1)
- Numerical welding simulation (1)
- Numerical welding simulations (1)
- Offshore steel grade (1)
- Offshore steels (1)
- Online Process Monitoring (1)
- Online monitoring (1)
- Open science (1)
- Open source (1)
- Optical Tomography (1)
- Optical measurement (1)
- Optical measurment technique (1)
- Optical tomography (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Oxide-induced crack closure (1)
- PAEKs (1)
- PBF-LB/M (1)
- PBF-LB/M/316L (1)
- PEAK (1)
- Parabolic flight (1)
- Partial penetration welding (1)
- Particle erosion (1)
- Particle transfer (1)
- Path planning (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Periodic solidification pattern (1)
- Phase field method (1)
- Phase transformation (1)
- Photogrammetry (1)
- Photooxidation (1)
- Physical vapor deposition (PVD) (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Pipe Welding (1)
- Pipe manufacturing (1)
- Pipe weld preparation (1)
- Pipeline (1)
- Pipeline steel of grade X120 (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plastic material flow (1)
- Plume heating (1)
- Poly(acrylic acid) (1)
- Polyethylene (1)
- Polymer (1)
- Pool dimensions (1)
- Porosity reduction (1)
- Position detection (1)
- Potential drop technique (1)
- Potentiodynamic measurements (1)
- Ppreheating temperature (1)
- Precipitation hardening aluminum alloys (1)
- Pressure-dependent solubility (1)
- Prevention (1)
- Principal stress (1)
- Probabilistic assessment (1)
- Process chain (1)
- Process development (1)
- Product standard (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proper generalized decomposition (1)
- Prostheses (1)
- Pulse electric current sintering (1)
- Pulsed laser beam welding (1)
- Quantitative bioimaging (1)
- R-curve analysis (1)
- RSW (1)
- Raman spectroscopy (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Reactor conditions (1)
- Reciprocating sliding (1)
- Reciprocating sliding wear (1)
- Reference data (1)
- Reference standards (1)
- Refraction (1)
- Relative humidity (1)
- Repair welding (1)
- Research data management (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Resistance Spot Welding (RSW) (1)
- Retained Austenite (1)
- Review (1)
- Ripples (1)
- Roughness (1)
- S-N probabilistic field (1)
- S-Phase (1)
- SLM (1)
- SMAW (1)
- SS316L alloy (1)
- SWIR (1)
- SWIR thermography (1)
- Safety (1)
- Sample random results (1)
- Scan strategies (1)
- Scan strategy influence (1)
- Scratches (1)
- Secondary heat source (1)
- Secondary stresses (1)
- Selective Laser Melting (1)
- Selective laser beam melting (1)
- Selektive-laser-melting (1)
- Sensor (1)
- Shared infrastruture (1)
- Shear modulus (1)
- Ship building (1)
- Shipbuilding steel (1)
- Short crack propagation (1)
- Shrinkages (1)
- Silicon nitride (1)
- Single asperity (1)
- Single asperity contact (1)
- Single cell (1)
- Single-pass welding (1)
- Sliding wear (1)
- Solubility (1)
- Spark plasma sintering (1)
- Spreading (1)
- Staircase method (1)
- Standard test piece (1)
- Standardisation (1)
- Static load (1)
- Statistical analysis (1)
- Statistical distributions (1)
- Statistics (1)
- Steady-state weld pool (1)
- Steel and Al (1)
- Stiffness (1)
- Stochastic sample functions (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain rate (1)
- Strain rates (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strain-rate (1)
- Strength mismatch (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress-strain behavior (1)
- Structural integrity assessment procedure (1)
- Structure analysis (1)
- Sub-oxide (1)
- Sub-size test piece (1)
- Sulphidation (1)
- Superalloy (1)
- Superconducting magnets (1)
- Supermartensitic steel (1)
- Support configurations (1)
- Surface (1)
- Surface Integrity (1)
- Surface cracks (1)
- Surface preparation (1)
- Surface structures (1)
- Surface temperature (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron diffraction (1)
- Synchrotron radiation (1)
- TEKKEN (1)
- TIG (1)
- TIG-welding (1)
- TaC (1)
- Tantalum carbide (1)
- Technical crack detection (1)
- Temperature dependence (1)
- Temperature field (1)
- Tensile loading (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Test standard (1)
- Testing method (1)
- Testing parameters (1)
- Texture (1)
- Thermal analysis (1)
- Thermal conductivity device (1)
- Thermal desorption analysis (1)
- Thermal-desorption spectroscopy (1)
- Thermal-fluid-structure coupling model (1)
- Thermo-fluid dynamics (1)
- Thermo-fluid flow (1)
- Thermodynamic modelling (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick plates (1)
- Thick-Walled Steel (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Thick-walled Structures (1)
- TiC (1)
- TiN (1)
- Titanium alloy (1)
- Titanium carbide (1)
- Tool (1)
- Tool service life (1)
- Tool-workpiece interaction (1)
- Toughening mechanisms (1)
- Transformable steels (1)
- Transient heat transfer (1)
- Transition temperature (1)
- Trapping (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribo-film (1)
- Tribologie (1)
- Tribooxidation (1)
- Triobology (1)
- Tubular X-joints (1)
- Tungsten carbide (1)
- Tungsten carbide (WC) (1)
- Turbine components (1)
- Turbine disk (1)
- Turning (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- UHMWPE (1)
- UV radiation (1)
- UV-blocker addition (1)
- Ultra-high strength steel (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic assited machining (1)
- V-notch impact toughness (1)
- Vapor recondensation (1)
- Vaporization (1)
- Varestraint test (1)
- Viscoplasticity (1)
- Void defect formation mechanism (1)
- WAAM (1)
- WAAM Ti-6Al-4V (1)
- WRC 1992 diagram (1)
- Wear mechanism (1)
- Wear mechanisms (1)
- Wear particles (1)
- Wear resistance (1)
- Weathering tests (1)
- Weld defects (1)
- Weld end crater (1)
- Weld geometry (1)
- Weld imperfections (1)
- Weld metal (1)
- Weld metal cracking (1)
- Weld pool (1)
- Weld pool behavior (1)
- Weld pool modeling (1)
- Weld root (1)
- Weld toe geometry (1)
- Weldability (1)
- Welded Joints (1)
- Welded joint (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Welding process simulation (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffdatenbank (1)
- White light interferometry (1)
- Widerstandspunktschweißen (1)
- Wind Energy (1)
- Wind energy (1)
- Wineglass shape (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- X-ray Diffraction (1)
- X-ray and Neutron Diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (1)
- X-ray computed tomography (XCT) (1)
- X-ray diffraction (1)
- X-ray refraction (1)
- XRF (1)
- Year in Review (1)
- Young's modulus (1)
- Zero wear (1)
- Zinc (1)
- Zinc coated steel (1)
- Zink (1)
- Zirconia (1)
- ZnO films (1)
- ZnO nanorods Nanocrystalline (1)
- a-C:H (1)
- arbidic austempered ductile iron (1)
- contact resonance (1)
- contour method (1)
- digital image correlation (1)
- dual phase steel (1)
- infrared Thermography (1)
- neutron diffraction (1)
- pL-droplets (1)
- residual stress analysis (1)
- resistance spot welding (1)
- µ-gravity (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (363) (entfernen)
Paper des Monats
- ja (7)
AbstractThe sustainable and resource-efficient production of wind energy plants requires the use of modern high-strength fine-grain structural steels. This applies to both foundation and erection structures, like mobile or ship cranes. During the assembly of steel structures, unacceptable defects can occasionally be found in the weld area. In most cases, the economical solution would be local thermal gouging of the affected areas and re-welding. Due to the high shrinkage restraint of the joint groove in the overall structure, the superposition of global and local welding-induced stresses may lead to crack formation and component failure, particularly in interaction with the degradation of the microstructure and mechanical properties of high-strength steels during the repair process. However, manufacturers hardly have any information about these issues and there is a lack of recommendations and guidelines to take these safety-relevant aspects into account in adequate repair concepts. The aim of this research is to derive recommendations for repair concepts appropriate to the stresses and materials involved providing a basis for standards and guidelines to avoid cold cracking, damage and expensive reworking especially for high-strength steels. Part 1 of this study involves systematic investigations of influences of shrinkage restraint during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures. The quantification of the shrinkage restraint of repair weld joints was achieved by means of experimental and numerical restraint intensity analysis. In welding experiments with self-restrained slot specimens, restraint intensity and introduction of hydrogen via the welding arc using anti spatter spray were varied systematically to analyse the effect on welding result, residual stresses and cold cracking. It could be shown that increasing restraint intensities result in significantly higher transverse residual stress levels. In the case of hydrogen introduction S500MLO showed no cold cracking independent of the restraint conditions. However, S960QL was found to be considerably cold cracking sensitive if hydrogen is introduced. With increasing restraint intensity length and number of cold cracks increases significantly. Part 2 [1] of this study is focussed on microstructure and residual stresses due to gouging and stress optimization via adequate heat control parameters in repair welding.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
Stresses in repair welding of high-strength steels—part 2: heat control and stress optimization
(2024)
In welding of high-strength steels, e.g. for foundations and erection structures of wind energy plants, unacceptable defects can occasionally be found in the weld area, which should be removed by thermal gouging and subsequent re-welding. High shrinkage restraint of repair welds may lead to crack formation and component failure, predominantly in interaction with degraded microstructures and mechanical properties due to repair cycles. This study aims for elaboration of recommendations for repair concepts appropriate to the stresses and materials involved to avoid cold cracking, damage and expensive reworking. In part 1 [1] of this study, systematic investigations of influences of shrinkage restraint on residual stresses and cold cracking risk during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures were focussed. In this part 2, the microstructure, particularly hardness, and residual stresses due to gouging and influences of heat control parameters in repair welding are analysed. A clear reduction in residual stress after gouging can be observed, especially for the specimens with restrained transverse shrinkage. Gouging to a depth of approx. 2/3 of the seam height does not lead to a complete relaxation of the observed reaction forces. Particularly for the higher strength steel S960QL, there are pronounced areas influenced by the gouging process in which a degradation of the microstructure and properties should be assumed. Overall, the repair welds show a significant increase in the width of the weld and HAZ compared to the original weld, especially in the case of S960QL/G89. The repair welds show higher welding-induced stresses than the original welds, especially in the areas of the HAZ and the base metal close to the weld seam. This behaviour can be attributed overall to increased restraint conditions due to the remaining root weld or shorter gouge grooves. In good agreement with earlier investigations, the residual stresses transverse to the weld can be significantly reduced by upwardly limited working or interpass temperatures, and the reaction stresses resulting from high restraint conditions can be effectively counteracted. The influence of the heat input on the stress formation is low compared to the interpass temperature for both test materials.
For the hydrogen-based energy economy of tomorrow, the construction of the necessary infrastructure will play a central role. Most materials used to date, such as welded steels, can be prone to hydrogen embrittlement under certain conditions. This includes the classic delayed cold cracking during welding as well as degradation phenomena during service of components in hydrogen-containing environment. For the evaluation of any hydrogen effect, for example, on the mechanical properties of a welded metallic material, the hydrogen content must be precisely determined. In the case of weld seams, the carrier gas hot extraction (CGHE) according to ISO 3690 is meanwhile state-of-the-art. CGHE is based on accelerated hydrogen degassing due to the thermal activation of hydrogen at elevated temperatures. In addition to the quantification of hydrogen, thermal desorption analysis (TDA) with varying heating rates can be used to determine and evaluate the hydrogen trapping at microstructural defects in the material. For both techniques, experimental and metrological influences must be considered, which have a major effect on the result. For example, ISO 3690 suggests different sample geometries and minimum extraction times for CGHE. This study summarizes the results and experiences of numerous investigations at the Federal Institute for Materials Research and Testing (BAM) with different sample temperatures and geometries (ISO 3690 type B and cylindrical TDA samples) regarding the influence of the sample surface (polished/welded), measurement accuracy depending on the sample volume and the insufficient monitoring of the effect of PI control on the extraction temperature. A deviating extraction temperature from the target temperature can significantly falsify the measurement results. Based on the results, methods are shown which allow the desired extraction temperature to be reached quickly without physically interfering with the measuring equipment. This serves to significantly improve the reliability of the hydrogen measurement through increased signal stability and accelerated hydrogen desorption. In general, an independent temperature measurement with dummy samples is recommended for the heating procedure of choice to exclude possible undesired temperature influences before the measurement. The methods described can be transferred directly to industrial applications
In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
Electromagnetic stirring is known to promote material flow, reduce porosity, uniform elements distribution, and refine grain in laser beam welding (LBW), which enhances the applicability of LBW in various industries. In this study, a phase-field model of dendrite growth in AA5754 Al alloy electromagnetic stirring laser beam welding was established. The model considered the thermal electromagnetic Lorentz force resulting from the interaction between the electric field generated by the Seebeck effect and the magnetic field, as well as the temperature gradient and solidification rate of the solidification interface obtained from the computational fluid dynamics electromagnetic stirring LBW model. The variation rules of dendrite growth with different magnetic parameters and effects are analyzed. Comprehensively, the magnetic field promotes the solidification rate, thus promoting interfacial instability and a large magnetic flux density leads to a faster interface instability. The solidification rate as well as the temperature gradient affect the growth rate, and the accelerated growth caused by the so lidification rate with a high frequency and a large magnetic flux density effectively inhibits the slow growth caused by the temperature gradient. The thermal electromagnetic Lorentz force is the main factor for the branch increment at low frequencies, while both thermal electromagnetic Lorentz force and temperature gradient in crease the number of branches at high frequencies. The calculated average branch numbers considering various factors in the stable stage under different magnetic parameters were consistent with the results of the scanning electron microscope tests.
Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers
(2024)
This study presents the influence of high-pressure hydrogen environment on the physical and mechanical properties of two types of cross-linked hydrogenated acrylonitrile butadiene rubbers. Based on the CSA/ANSI standard, static exposures in hydrogen experiments were performed up to 100 MPa at 120 °C. Characterization before and after exposure was conducted by means of density and hardness measurements, dynamic mechanical analysis (DMA), tensile tests, compression set, FT-IR and AFM analyses to assess effects after decompression. While the effect of high-pressure exposure is significant immediately after exposure, most of the physical and mechanical properties recover after 48 hours. FT-IR, AFM, SEM and compression set results indicate, however, permanent effects.
Multiple principal element alloys encompass the well-known high entropy alloys (HEA). The alloy system represents a new class of materials consisting of at least three alloying elements, each containing 5 to 35 at.%. Thus, this alloying concept differs fundamentally from conventional materials such as steel or nickel alloys. For this purpose, the alloying elements are specifically selected, the microstructures are adjusted in a single-phase and, in some cases, multi-phase manner. In particular, conflicting goals, such as the trade-off between strength and ductility in conventional steels, are overcome. However, in the last 20 years, the focus has been on material synthesis. With the increase in available material quantities, the focus is now on processing issues such as joining and welding processes. The weldability of HEAs has received very little attention so far. The experience with dissimilar metal welds is completely lacking but is essential for the application of these materials in combination with conventional materials. The present study presents comprehensive experimental results on the weldability of an equimolar CoCrFeMnNi-HEA in cold-rolled and heat-treated condition, which was joined by tungsten inert gas welding to an austenitic steel AISI 304. The mechanical properties of the dissimilar metal welds were characterized by cross-weld tensile samples, whereas the local deformation in the weld of the different welding zones was measured by digital image correlation. In accordance with the respective initial HEA condition (cold-rolled vs. heat-treated), the local strain behavior was divergent and influenced the global mechanical properties of both DMW types. Nonetheless, the experiments provided proof in principle of the weldability for dissimilar joints of the CoCrFeMnNi-HEA welded to conventional materials like austenitic stainless steels ensuring a corresponding capability for mechanical loading. This allows further considerations on the application of these innovative materials.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.