Ingenieurwissenschaften und zugeordnete Tätigkeiten
Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (67) (entfernen)
Schlagworte
- Additive manufacturing (7)
- Thermography (6)
- Additive Fertigung (5)
- Additive Manufacturing (5)
- Thermografie (5)
- Röntgen-Refraktion (4)
- 3D Druck (3)
- Künstliche Bewitterung (3)
- Laser powder bed fusion (3)
- Active thermography (2)
- CFK (2)
- Carbon fiber reinforced polymers (2)
- Composite structures (2)
- Composites (2)
- Distributed fibre optic sensors (2)
- Hydrogen storage (2)
- In-situ monitoring (2)
- Infrared thermography (2)
- Lamb waves (2)
- Laminography (2)
- Laser metal deposition (2)
- Machine Learning (2)
- Non-destructive testing (2)
- Optical backscatter reflectometry (2)
- Optical fibre (2)
- Polymere (2)
- Pressure tanks (2)
- Residual stress (2)
- Scaled Boundary Finite Element Method (2)
- Selective laser melting (2)
- Serial sectioning (2)
- Structural Health Monitoring (2)
- Structural health monitoring (SHM) (2)
- Swept wavelength interferometry (SWI) (2)
- Ultraschall (2)
- Ultrasound (2)
- Verbundwerkstoffe (2)
- Zerstörungsfreie Prüfung (2)
- 3D printing (1)
- Acoustic emission (1)
- Additive Fertigung (AM) (1)
- Additive manufacturing (AM) (1)
- Adhesive joint (1)
- Adjustment calculation (1)
- Advanced Manufacturing (1)
- Air-coupled ultrasonic testing (1)
- Aktive Laserthermografie (1)
- All-optical switching (1)
- Analysis of wormholes (1)
- Artificial weathering (1)
- Asymmetric coupler (1)
- Atmospheric pressure plasma (1)
- Austenitic stainless steel (1)
- Automobilindustrie (1)
- Bauteilmonitoring (1)
- Bondline (1)
- Borehole probe (1)
- Brennfleckmessung (1)
- CFRP (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- COD-AGE (1)
- Capillary conductivity (1)
- Carbon fibre reinforced polymer (1)
- Carbonate matrix stimulation (1)
- Chemischer Angriff (1)
- Composite-Druckgefäß (1)
- Computed Tomography (1)
- Computed tompgraphy (1)
- Computertomographie (1)
- Concrete (1)
- Coupled generalized nonlinear Schrödinger equation (1)
- Crack growth (1)
- Damage detection (1)
- Damage tolerance (1)
- Dielectric materials (1)
- Diffraction (1)
- Digital Twin (1)
- Direct energy deposition (1)
- Dispersion curves (1)
- Dissimilar welds (1)
- Druckbehältern (1)
- Dual-core photonic crystal fiber (1)
- Eddy current (1)
- Eindringmodul (1)
- Engineered barrier; (1)
- Epoxy (1)
- European Metrology Network (EMN) (1)
- Faser-Bragg Gitter (1)
- Faseroptische Sensorik (1)
- Faserverbund (1)
- Fatigue (1)
- Fatigue crack growth (1)
- Fiber reinforced polymer (1)
- Finite Element Modelling (1)
- Finite element method (1)
- Flüssigkeitssensor (1)
- Fracture (1)
- Frequenzanalyse (1)
- GFRP (1)
- Gas discharges (1)
- Geführter Ultraschall (1)
- HPC (1)
- Haynes 282 (1)
- Heat accumulation (1)
- High-energy X-ray CT (1)
- Holz (1)
- Hybrid Materialien (1)
- Härtevergleichsplatten (1)
- IN718 (1)
- Image reconstruction (1)
- Impact (1)
- In-situ Monitoring (1)
- Individual cell tracking (1)
- Indoor Localization (1)
- Insitu test (1)
- Instrumentierte Eindringprüfung (1)
- Insulation material (1)
- Inverse Verfahren (1)
- Keramik (1)
- Keyhole porosity (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kraftabhängige Funktion (1)
- LMD (1)
- Laboratory specimens (1)
- Laminated metal composite (1)
- Laser Metal Deposition (1)
- Laser Powder Bed Fusion (1)
- Laser Pulver Auftragsschweißen (1)
- Laser beam melting (LBM) (1)
- Laser powderbed fusion (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Lebensdauerversuche (1)
- Longitudinal Wave (1)
- MSG-Schweißen (1)
- Magneto-optischer Sensor (1)
- Magnetostriktive Beschichtung (1)
- Maschinennachgiebigkeit (1)
- Materials Design (1)
- Mechanical strength (1)
- Melt-pool-monitoring (1)
- Metrology (1)
- Micro-CT (1)
- Mikro CT (1)
- Mobile Robot (1)
- Moisture clog (1)
- Moisture transport (1)
- Monitoring (1)
- Multi-layered system (1)
- Multispectral thermography (1)
- NDT (1)
- NDT Inspection (1)
- NMR (1)
- Natural gas (1)
- Neutron diffraction (1)
- Nondestructive testing (1)
- Nuclear magnetic resonance (1)
- Nuclear power plants (1)
- Numerische Simulation (1)
- Optical tomography (1)
- Optische Emissionsspektroskopie (OES) (1)
- Passive thermography (1)
- Phased array technique (1)
- Phononischer Kristall (1)
- Photon counting detector (1)
- Plasma acoustics (1)
- Polyamid 12 (1)
- Polymer (1)
- Pore-size distribution (1)
- Pores (1)
- Porosity (1)
- Porosität (1)
- ProMoAM (1)
- Process monitoring (1)
- Process parameter optimization (1)
- Prüfkörper (1)
- Rayleigh Rückstreuung (1)
- Rekonstruktion (1)
- Repair patch (1)
- Residual Stress (1)
- Residual Stresses (1)
- Rissbildung (1)
- Rissbildung in Stahl (1)
- Rissentwicklung (1)
- Röntgenrefraktion (1)
- Röntgenröhre (1)
- SBFEM (1)
- SWIR camera (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Scaled Boundary FEM (1)
- Schallemission (1)
- Schallemissionsanalyse (SEA) (1)
- Schallemissionsprüfung (1)
- Schmelzbadbeobachtung (1)
- Schweißnahtgeometrie (1)
- SealWasteSafe (1)
- Selbstkalibrierung (1)
- Selective Laser Melting (1)
- Selective laser melting (SLM) (1)
- Self-healing (1)
- Sequential Learning (1)
- Setup and Validation (1)
- Simulation (1)
- Smart industry (4.0) (1)
- Soft glass (1)
- Speed of sound (1)
- Sphärische Indenter (1)
- Strategic Research Agenda (SRA) (1)
- Sychrotron tomography (1)
- Synchrotron X-ray computed tomography (1)
- Synchrotron X-ray diffraction (1)
- Synchrotronstrahlung (1)
- TBC - Thermal barrier coatings (1)
- TES (1)
- THz Spectroscopy (1)
- THz radiation (1)
- THz-TDS (1)
- Temperature (1)
- Temperature emissivity separation (1)
- Terahertz synthetic aperture (1)
- Thermographie (1)
- Thermoplastic (1)
- Ti-6Al-4V (1)
- Tomographie, (1)
- Toughening mechanism (1)
- Transverse isotropy (1)
- Ultrafast soliton fission (1)
- Ultrasonic Transducer (1)
- Ultrasonic testing (1)
- Ultrasonics (1)
- Vereinfachtes Verfahren (1)
- Verpressanker (1)
- Wasserstoffspeicher (1)
- Welded (1)
- Wellenprüfung (1)
- Wind energy (1)
- Wirbelstromprüfung (1)
- Wood materials (1)
- X-ray CT (1)
- X-ray computed tomography (1)
- X-ray laminography (1)
- X-ray radiography (1)
- XL-CT (1)
- Zahnstifte (1)
- Zuverlässigkeit (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (67) (entfernen)
Das Ausbreitungsverhalten geführter Ultraschallwellen ermöglicht die großflächige Prüfung von Platten und schalenförmigen Bauteilen wie Rohren und Laminaten auf Fehlstellen von wenigen Prüfpunkten aus. Während die beschränkte Divergenz der geführten Wellen die Ultraschallprüfung begünstigt, erschwert das dispersive und multimodale Verhalten der Lamb-Wellen die Auswertung der Ultraschallsignale. Die dispersive und multimodale Wellenausbreitung verkompliziert die Bestimmung der Fehlerposition bei der Auswertung der Geschwindigkeiten einzelner Wellenpakete. Zudem ist es herausfordernd, einen einfachen Zusammenhang zwischen den Reflexionen der Fehlstelle und deren Größe und Form herzustellen. Eine Möglichkeit zur genauen Bestimmung der Fehlerposition und -geometrie bietet der direkte Vergleich der Messsignale mit den Signalen aus einem Simulationsmodell. Die Nachbildung des Schadens im Simulationsmodell stellt ein inverses Problem dar, das iterativ gelöst werden kann, indem ein Vorwärtsmodell immer weiter optimiert wird. Klassische Ansätze wie die Finite Elemente Methode (FEM) sind für die Simulation von Ultraschallwellen aufgrund der kleinen Wellenlängen im Vergleich zur Bauteilgröße meist ineffizient. Aus diesem Grund basiert das vorgestellte Vorwärtsmodell auf der semi-analytischen Scaled Boundary Finite Element Method (SBFEM), die große Teile der Wellenausbreitung analytisch berechnet. In diesem Beitrag wird die Validierung des zweidimensionalen Modells an Platten mit einer rechteckigen Nut als Ersatzfehler präsentiert und es werden erste Schritte zur Validierung von 3D-Modellen vorgestellt.
Various software products for the simulation of industrial X-ray radiography have been developed in recent years (e.g., aRTist 2, CIVA CT, Scorpius XLab, SimCT, Wilcore) and their application potential has been shown in numerous works. However, full systematic approaches to characterise a specific CT system for these simulation software products to obtain a truthful digital twin are still missing. In this contribution, we want to present two approaches to obtain realistic grey values in X-ray projections in aRTist 2 simulations based on measured projections. In aRTist 2, the displayed grey value of a pixel is based on the energy density incident on that pixel.
The energy density is calculated based on the X-ray tube spectrum, the attenuation between source and detector as well as an energy-dependent sensitivity curve of the detector. The first approach presented in this contribution uses the sensitivity curve as a free modelling parameter. We measured the signal response at different thicknesses of Al EN-AW6082 at different tube voltages (i.e., different tube spectra). We then regarded the grey values displayed by these projections as a data regression respectively an optimisation problem and obtained the sensitivity curve that is best able to reproduce the measured behaviour in aRTist 2. The resulting sensitivity curve does not necessarily hold physical meaning but is able to simulate the real system behaviour in the simulation software.
The second approach presented in this contribution is to estimate the sensitivity curve based on assumptions about the characteristics of the scintillation detector (e.g., scintillator material, scintillator thickness and signal processing characteristics). For this approach, a linear response function (linear relationship between the deposited energy per pixel and the resulting grey value) is assumed. If the detector characteristics, which affect the simulated deposited energy, are properly modelled, the slope and offset of the response function to match the measured grey values should be the same for different tube spectra. As the offset is constant and given by the grey values measured at no incident radiation, the slope is the remaining parameter to evaluate the success of the detector modelling. We therefore adapted the detector characteristics by changing the detector setup until the slope was nearly the same for all measured tube spectra. We are aware that the resulting parameters of the scintillator material and thickness might not be the real ones, but with those modelling parameters we are able to simulate realistic grey values in aRTist 2. Both of those approaches could potentially be a step forward to a full systematic approach for a digital twin of a real CT system in aRTist 2.
Early detection of fatigue cracks and accurate measurements of the crack growth play an important role in the maintenance and repair strategies of steel structures exposed to cyclic loads during their service life. Observation of welded connections is especially of high relevance due to their higher susceptibility to fatigue damage. The aim of this contribution was to monitor fatigue crack growth in thick welded specimens during fatigue tests as holistically as possible, by implementing multiple NDT methods simultaneously in order to record the crack initiation and propagation until the final fracture. In addition to well-known methods such as strain gauges, thermography, and ultrasound, the crack luminescence method developed at the Bundesanstalt für Materialforschung und -prüfung (BAM), which makes cracks on the surface particularly visible, was also used. For data acquisition, a first data fusion concept was developed and applied in order to synchronize the data of the different methods and to evaluate them to a large extent automatically. The resulting database can ultimately also be used to access, view, and analyze the experimental data for various NDT methods. During the conducted fatigue tests, the simultaneous measurements of the same cracking process enabled a comprehensive comparison of the methods, highlighting their individual strengths and limitations. More importantly, they showed how a synergetic combination of different NDT methods can be beneficial for implementation in large-scale fatigue testing but also in monitoring and inspection programs of in-service structures - such as the support structures of offshore wind turbines.
The European Commission has identified Advanced Manufacturing and Advanced Materials as two of six Key Enabling Technologies (KETs). It is considered that Metrology is a key enabler for the advancement of these KETs. Consequently, EURAMET, the association of metrology institutes in Europe, has strengthened the role of Metrology for these KETs by enabling the creation of a European Metrology Network (EMN) for Advanced Manufacturing. The EMN is comprised of National Metrology Institutes (NMIs) and Designated Institutes (DIs) from across Europe and was formally established in October 2021. The aim of the EMN is to provide a high-level coordination of European metrology activities for the Advanced Manufacturing community.
The EMN itself is organized in three sections representing the major stages of the manufacturing chain: 1) Advanced Materials, 2) Smart Manufacturing Systems, and 3) Manufactured Components & Products. The EMN for Advanced Manufacturing is engaging with stakeholders in the field of Advanced Manufacturing (large companies & SMEs, industry organisations, existing networks, and academia), as well as the wider Metrology community, including Technical Committees, to provide input for the Strategic Research Agenda (SRA) on Metrology for Advanced Manufacturing.
This contribution will give an overview about the first version of the SRA prepared by the EMN for Advanced Manufacturing
Monitoring and maintenance of civil infrastructure are of great importance, as any undetected damage can cause high repair costs, unintended deadtime, or endanger structural integrity. The inspection of large concrete structures such as bridges and parking lots is particularly challenging and time-consuming. Traditional methods are mostly manual and involve mapping a grid of measurement lines to record the position of each measurement. Current semi-automated methods, on the other hand, use GPS or tachymeters for localization but still require trained personnel to operate. An entirely automated approach using mobile robots would be more cost- and time-efficient. While there have been developments in using GPS-enabled mobile robots for bridge inspection, the weak signal strength in indoor areas poses a challenge for the automated inspection of structures such as parking lots. This paper aims to develop a solution for the automated inspection of large indoor concrete structures by addressing the problem of robot localization in indoor spaces and the automated measurement of concrete cover and rebar detection.
For the wide acceptance of the use of additive manufacturing (AM), it is required to provide reliable testing methods to ensure the safety of the additively manufactured parts. A possible solution could be the deployment of in-situ monitoring during the build process. However, for laser powder bed fusion using metal powders (PBF-LB/M) only a few in-situ monitoring techniques are commercially available (optical tomography, melt pool monitoring), which have not been researched to an extent that allows to guarantee the adherence to strict quality and safety standards.
In this contribution, we present results of a study of PBF-LB/M printed parts made of the nickel-based superalloy Haynes 282. The formation of defects was provoked by local variations of the process parameters and monitored by thermography, optical tomography and melt pool monitoring. Afterwards, the defects were characterized by computed tomography (CT) to identify the detection limits of the used in-situ techniques.
Safety-critical applications of products manufactured by laser powder bed fusion (PBF-LB/M) are still limited to date. This is mainly due to a lack of knowledge regarding the complex relationship between process, structure, and resulting properties. The assurance of homogeneity of the microstructure and homogeneity of the occurrence and distribution of defects within complexly shaped geometries is still challenging. Unexpected and unpredicted local inhomogeneities may cause catastrophic failures. The identification of material specific and machine specific process parameter windows for production of fully dense simple laboratory specimens is state of the art. However, the incorporation of changing thermal conditions that a complexly shaped component can be faced with during the manufacturing process is often neglected at the stage of a process window determination. This study demonstrates the tremendous effect of changing part temperatures on the defect occurrence for the broadly used stainless steel alloy AISI 316L. Process intrinsic variations of the surface temperature are caused by heat accumulation which was measured by use of a temperature adjusted mid-wavelength infrared (MWIR) camera. Heat accumulation was triggered by simple yet effective temporal and geometrical restrictions of heat dissipation. This was realized by a variation of inter layer times and reduced cross section areas of the specimens. Differences in surface temperature of up to 800 K were measured. A severe development of keyhole porosity resulted from these distinct intrinsic preheating temperatures, revealing a shift of the process window towards unstable melting conditions. The presented results may serve as a warning to not solely rely on process parameter optimization without considering the actual process conditions a real component is faced with during the manufacturing process. Additionally, it motivates the development of representative test specimens.
Capillary active interior insulation materials are an important approach to minimize energy losses of historical buildings. A key factor for their performance is a high liquid conductivity, which enables redistribution of liquid moisture within the material. We set up an experiment to investigate the development of moisture profiles within two different interior insulation materials, calcium-silicate (CaSi) and expanded perlite (EP), under constant boundary conditions. The moisture profiles were determined by two different methods: simple destructive sample slicing with subsequent thermogravimetric drying as well as non-destructive NMR measurements with high spatial resolution. The moisture profiles obtained from both methods show good agreement, when compared at the low spatial resolution of sample slicing, which demonstrates the reliability of this method. Moreover, the measured T2-relaxation-time distributions across the sample depth were measured, which may give further insight into the saturation degree of the different pore sizes. In order to explain differences in the moisture profiles between CaSi and EP, we determined their pore-size distribution with different methods: conversion of the NMR T2 relaxationtime distribution at full saturation, mercury intrusion porosimetry and indirect determination from pressure plate measurements. CaSi shows a unimodal distribution at small pore diameters, while in EP, a bi-modal or wider distribution was found. We assume that the smaller pore diameters of CaSi lead to a higher capillary conductivity, which causes a more distributed moisture profile in comparison with that of EP.
In Leichtbauanwendungen sind Materialien mit geringen Dichten und hohen Festigkeiten gefragt. Insbesondere Faser-Kunststoff-Verbunde (FKV) erfüllen diese Anforderungen und werden zunehmend für Strukturbauteile eingesetzt. Die Oberflächen moderner Rotorblätter von Windkraftanlagen werden aus FKV gefertigt. Das Versagen dieser Materialien hat massiven Einfluss auf die Einsatzfähigkeit der gesamten Windkraftanlage. Daher ist die Kenntnis des Versagensverhaltens dieser Komponenten unter statischer und zyklischer Belastung von großem Interesse, um die Betriebsbeanspruchung abzuschätzen. Im Idealfall wird die Schadensentwicklung unter Betriebslast mit zerstörungsfreien in-situ-Prüfverfahren ermittelt. Hier berichten wir über die Beobachtung der Rissentwicklung in Carbon-Faserverstärkten Kunststoffen (CFK) unter kontinuierlicher Zugbelastung durch in-situ Synchrotron-Röntgenrefraktionsradiographie. Eine selbst entwickelte elektromechanische Zugprüfmaschine mit einem Kraftbereich bis zu 15 kN wurde in den Strahlengang an der BAMline (BESSY II) integriert. Da in herkömmlichen (Absorptions-) Radiographien Defekte wie Zwischenfaserbrüche oder Faser-Matrix-Enthaftung keinen ausreichenden Kontrast verursachen, wird zur Kontrastanhebung die Röntgenrefraktion benutzt. Hier wird das sogenannte Diffraction Enhanced Imaging (DEI) angewandt, um Primär- und gebrochene Strahlung mit Hilfe eines Analysatorkristalls zu trennen. Diese Technik ermöglicht schnelle Messungen mit einem Gesichtsfeld von einigen Quadratmillimetern (hier: 14 mm × 7.2 mm) und ist ideal für in-situ Untersuchungen. Die Bildgebung und der Zugversuch erfolgen mit einer Bildfrequenz von 0.7 / s und einer Dehnrate von 0.00055 / s . Bei 0°/90° Fasergelegen treten die ersten Zwischenfaserrisse bei 380 MPa (Dehnung 0.8 %) auf. Vor dem Versagen bei ca. 760 MPa (Dehnung 2.0 %) beobachten wir die Ausbildung eines nahezu äquidistanten Rissmusters (Risse in ca. 1 mm Abstand), das sich im geschädigten Zustand über die gesamte Probe erstreckt.
Die Brechung von Röntgenstrahlen (Röntgenrefraktion) an Grenzflächen zwischen Materialien unterschiedlicher Dichte ist analog zur Ablenk-ung von sichtbarem Licht an z.B. Glasoberflächen. Es gibt jedoch zwei wesentliche Unterschiede:
a) konvexe Grenzflächen verursachen Divergenz (d.h. der Brechungsindex n ist kleiner als 1), und
b) die Ablenkungswinkel sind sehr klein, und reichen von einigen Bogensekunden bis zu einigen Bogenminuten (d.h. n ist nahe bei 1);
Wie auch bei sichtbarem Licht ist die Ablenkungsrichtung der Röntgenstrahlen abhängig von der Orientierung der durchstrahlten Grenzfläche. Aufgrund dieser Eigenschaften eignen sich Röntgenrefraktionsmethoden hervorragend für:
a) die Erkennung und Quantifizierung von Defekten wie Poren und Mikrorissen und
b) die Bewertung von Porosität und Partikeleigenschaften wie Orientierung, Größe und räumliche Verteilung.
Wir zeigen die Anwendung der Röntgenrefraktionsradiographie (2,5D Technik) und der -tomographie (3D Technik) für die Untersuchung verschiedener Probleme in der Werkstoffwissenschaft und -technologie:
a) Sintern von SiC-Grünkörpern
b) Porositätsanalyse in Dieselpartikelfiltersilikaten
c) Faser-Matrix-Haftung in Metall- und Polymermatrixverbundwerkstoffen
d) Mikrorissbildung in Glaskeramik.
Wir zeigen, dass der Einsatz von Röntgenrefraktionsmethoden quantitative Ergebnisse liefert, die direkt als Parameter in Werkstoffmodellen verwendet werden können.