Analytische Chemie
Filtern
Erscheinungsjahr
Dokumenttyp
- Beitrag zu einem Tagungsband (7)
- Vortrag (6)
- Zeitschriftenartikel (5)
- Sonstiges (1)
- Posterpräsentation (1)
Schlagworte
- Radar (13)
- Zerstörungsfreie Prüfung (7)
- Ground penetrating radar (4)
- Non-destructive testing (4)
- Stahlbeton (4)
- Concrete (3)
- Railroad (3)
- GPR (2)
- Rebar (2)
- Ultraschall (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (6)
Das Projektziel war die Vermeidung von Schäden bei Erdarbeiten und Ausschachtungen durch Entwicklung eines innovativen Bodenradarsystems mit wesentlicher Verbesserung des räumlichen Auflösungsvermögens bei der zerstörungsfreien Ortung von folgenden Objekten im Untergrund: Gasleitungen, Frisch- und Abwasserleitungen, Leitungen zur Elektrizitäts- und Kommunikationsversorgung aus verschiedenen Materialien und umgeben mit unterschiedlichen Böden mit variierendem Feuchtegehalt. Darüber hinaus ging es um die Reduzierung der Kosten und Erhöhung der Akzeptanz des Verfahrens durch eine schnelle Echtzeit-Interpretation der Messdaten.
In this paper, a new method for the investigation of the degradation of ballast railway track beds is proposed. An array of antennas is used for simultaneous acquisition of reflected radar impulses, which have been transmitted from different sending positions. This array setup allows an automated CMP-measurement, which enables a direct calibration of the ballast thickness. These multiple offset measurements using the array setup are well suited for fast railway inspections. The method offers the possibility to visualize the state of degradation of the ballast in a velocity spectrum.
Die Ermittlung der genauen Bewehrungslage ist von großem Interesse bei der Instandsetzung und Ertüchtigung von Stahlbetonbauwerken. Denn nur wenn die Lage der für die Standsicherheit wichtigen Bewehrung bekannt ist, können Kernbohrungen oder Sägearbeiten schadensfrei durchgeführt werden. Das Bodenradar als zerstörungsfreie Methode ist wegen des einfachen Verfahrens der Antenne entlang einer Messspur für eine solche Aufgabenstellung sehr gut geeignet. Die Anwendung kann aber eingeschränkt werden, wenn die gesuchte Bewehrung zu tief liegt oder durch eine davor liegende Bewehrung abgeschattet wird. Bei der Ortung mehrlagiger Bewehrung ist es wichtig, einen mehrstufigen und effizienten Messplan zu erstellen, der den Aufwand auf einem vertretbaren Maß beschränkt und die Möglichkeit bietet, beim Erreichen der Verfahrensgrenzen rechtzeitig die Untersuchung abzubrechen. Am Beispiel einer Stahlbetonbrücke, die nachträglich mit externen Spanngliedern versehen wurde, wird das Vorgehen beim Orten von mehrlagiger Bewehrung gezeigt.
Ground penetrating radar (GPR) was used to characterize the frequency-dependent dielectric relaxation phenomena in ordinary Portland cement (OPC) hydration in concrete changing from fresh to hardened state. The study was experimented by measuring the changes of GPR A-scan waveforms over a period of 90 days, and processed the waveforms with short-time Fourier transform (STFT) in joint time-frequency analysis (JTFA) domain rather than a conventional time or frequency domain alone. The signals of the direct wave traveled at the concrete surface and the reflected wave from an embedded steel bar were transformed with STFT, in which the changes of peak frequency over ages were tracked. The peak frequencies were found to increase with ages and the patterns were found to match closely with primarily the well-known OPC hydration process and secondarily, the evaporation effect. The close match is contributed to the simultaneous effects converting free to bound water over time, on both conventional OPC hydration and dielectric relaxation mechanisms.
Muon Tomography of the Interior of a Reinforced Concrete Block: First Experimental Proof of Concept
(2021)
Quality assurance and condition assessment of concrete structures is an important topic world-wide due to the aging infrastructure and increasing traffic demands. Common topics include, but are not limited to, localisation of rebar or tendon ducts, geometrical irregularities, cracks, voids, honeycombing or other flaws. Non-destructive techniques such as ultrasound or radar have found regular, successful practical application but sometimes suffer from limited resolution and accuracy, imaging artefacts or restrictions in detecting certain features. Until the 1980s X-ray transmission was used in case of special demands and showed a much better resolution than other NDT techniques. However, due to safety concerns and cost issues, this method is almost never used anymore. Muon tomography has received much attention recently. Novel detectors for cosmic muons and tomographic imaging algorithms have opened up new fields of application, such as the investigation of freight containers. Muon imaging also has the potential to fill some of the gaps currently existing in concrete NDT. As a first step towards practical use and as a proof of concept we used an existing system to image the interior of a reference reinforced 600 kg concrete block. Even with a yet not optimized setup for this kind of investigation, the muon imaging results are at least of similar quality compared to ultrasonic and radar imaging, potentially even better. The data acquisition takes more time and signals contain more noise, but the images allowed to detect the same important features that are visible in conventional high energy X-ray tomography. In our experiment, we have shown that muon imaging has potential for concrete inspection. The next steps include the development of mobile detectors and optimising acquisition and imaging parameters.
We investigated the possibility of surrounding waves
along with perimeter of large diameter tendon ducts during
ground penetrating radar (GPR) testing of concrete structures.
The surrounding waves influence the primary reflection from
tendon duct and alter the phase as well as amplitude of signal
depending on the diameter of the tendon duct. This phenomenon
was studied in detail by conducting several simulations using a
commercial software Reflexw®. Finite Difference Time Domain
method was adopted to analyze reflection patterns from objects
of various diameters located at different depths in concrete
media.
The proposed methodology will be useful in qualitative
assessment of size of metallic objects greater than a diameter of
6 cm. In general, the identification of large diameter tendon ducts
in a civil structure is carried out by prior knowledge of the civil
plan and its diagonal appearance to smaller diameter object
mesh. The proposed methodology will enhance the confidence in
identification of the larger diameter tendon ducts even if the civil
plan is not known accurately.
The concreting of prefabricated concrete structures can lead to insufficient bonding or even to remaining cavities. Honeycombs (aggregate clusters without cement) represent potential weakening of the structure and need to be detected non-destructively. In our study we tested the capability of ground penetrating radar (GPR)techniques for this purpose. We applied GPR in reflection mode and zero-offset profiling (ZOP) Transmission mode on a precast concrete twin wall with built-in honeycombs. GPR measurements were performed as twochannel measurement with ground coupled antennas with centre frequencies of 1.5 GHz and 2.6 GHz mounted to an automated scanner system.
Our findings show that ZOP transmission measurements are a more efficient method to detect voids in reinforced concrete structures compared to reflection mode measurements. This holds for both the effort needed for the measurement and the evaluation as well as the validity of the data. Honeycombs (basically representing voids) are usually characterized by strongly reduced amplitudes and earlier arrivals of the transmitted wave.
Dunkelfärbung der Betonfahrbahndecke im AKR-Kontext - Ursachenanalyse mit innovativer Prüftechnik
(2018)
Die AKR-Schadensevolution von Betonfahrbahndecken ist in der Anfangsphase durch eine Dunkelfärbung der Oberfläche im Fugenbereich gekennzeichnet. Es wird vermutet, dass eine erhöhte Durchfeuchtung der Betonrandzone ursächlich für diese Erscheinung ist. Vor diesem Hintergrund wurde exemplarisch eine Fahrbahnplatte eines repräsentativen Bundesautobahnabschnitts systematisch mit verschiedenartiger zerstörungsfreier Prüftechnik vor Ort untersucht. Die Ergebnisse der zunächst erfolgten großflächigen Durchmusterung mit Radar zeigen, dass in den Bereichen mit einer Dunkelfärbung der Betonfahrbahndecke erhöhte Laufzeiten der Radarimpulse zwischen der
Oberfläche und der Rückseite der Betonfahrbahndecke auftreten, was auf eine erhöhte integrale Durchfeuchtung der Betonfahrbahndecke schließen lässt. Vertiefend durchgeführte NMR-Feuchtemessungen in der Betonrandzone zeigen eine gute Korrelation zwischen erhöhtem Feuchtegehalt und der dunkel gefärbten Fahrbahnoberfläche. Die Ergebnisse beider zerstörungsfreien Prüfmethoden lassen den Schluss zu, dass die Betonfahrbahndecke in der Nähe des Fugenkreuzes eine höhere Durchfeuchtung als im Bereich der Querscheinfuge aufweist. Die geringste Durchfeuchtung besitzt die Betonfahrbahndecke in der Plattenmitte. Die mit den zerstörungsfreien Prüfverfahren ermittelten Befunde stimmen prinzipiell gut mit den punktuell mittels Darr-Wäge-Verfahren an Bohrmehlproben gewonnenen Ergebnissen überein.
Research and Development in Non-Destructive Testing in Civil Engineering at BAM has de-veloped over more than two decades. Highlights of present research are ultrasound phase array probes, ground penetrating radar applications for the assessment of existing structures and Laser Induced Breakdown Spec-troscopy (LIBS) to determine which chemical elements on the surface of a specimen are. RFID sensor devel-opments for wireless moisture monitoring and data fusion for the combined analysis of sensor data are fast developing areas. In addition, a selection of application cases is briefly described.