Analytische Chemie
Filtern
Erscheinungsjahr
- 2014 (64) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (34)
- Beitrag zu einem Tagungsband (13)
- Vortrag (6)
- Forschungsbericht (3)
- Tagungsband (Herausgeberschaft für den kompletten Band) (2)
- Forschungsdatensatz (2)
- Buchkapitel (1)
- Dissertation (1)
- Sonstiges (1)
- Posterpräsentation (1)
Schlagworte
- Prozessanalytik (7)
- Raman spectroscopy (6)
- Digital detector array (DDA) (3)
- Electron backscatter diffraction (3)
- NDT (3)
- Reaction monitoring (3)
- Zerstörungsfreie Prüfung (3)
- Betatron (2)
- Image quality (2)
- Kikuchi pattern (2)
Eingeladener Vortrag
- nein (6)
Aus der Möglichkeit mittels Zentrifugentechnologie bis zu 8 Proben gleichzeitig einer Zugprüfung unter wirklich identischen Bedingungen, schnell über einfaches Einstecken der Proben und unter Ausschluss jeglicher Querkräfte, zu unterziehen , ergab sich für Klebverbindungen erstmals die Möglichkeit einer statistisch abgesicherten Prüfung identischer bzw. einer vergleichend bewertenden Prüfung unterschiedlicher Verbundsysteme. Es war deshalb naheliegend, auch das Aufkleben der Prüfstempel unter möglichst identischen Bedingungen und ebenfalls frei von Querkräften im OKTETT durchzuführen. Außerdem sind beim durchgehenden Handling im OKTETT die identische Vorbehandlung vor dem Kleben, identische Transferzeiten und -bedingungen zwischen den verschiedenen Prozessschritten, eine weitgehend gleichartige Klebstoffaufbereitung und -applikation sowie die bessere Einhaltung von gleichen Verarbeitungs- und Aushärtezeiten der Klebstoffe vor der Prüfung der Verbundfestigkeit für jeweils 8 Proben sichergestellt. Im Ergebnis dieser Überlegungen stellte sich schnell heraus, dass das Mehr-Proben-Kleben unter identischen Bedingungen für in Grenzen unterschiedliche Verbundsysteme eine ungelöste Aufgabenstellung ist.
The writing materials of the Silk Road book cultures in Turfan – Analysis of inks and pigments
(2014)
Manuscript fragments discovered in the oasis of Turfan and in other sites of present-day China in the beginning of the 20th century by A. Grünwedel and A. von Le Coq, represent one of the most fascinating cultural testimonies of people who both lived there and travelled along the trade routes between East and West. To determine the different materials used for writing and painting the Chinese, Sanskrit, Manichaean, Syrian, Sogdian, Tocharian and Uighur fragments of the Berlin collection, analysis of inks and pigments were conducted using non-destructive methods. The research was funded by the German Research Foundation DFG for a period of three years. The identification of specific techniques of preparation allows manuscript groups and sub-groups to be specified, aiding their cultural assignment. This is important for further cultural studies, for the development of conservation strategies and the identification of forgeries.
In the majority of cases, the red color of cinnabar on objects of cultural heritage is well preserved, though turning black is often claimed and has been the subject of investigations. To evaluate conditions for the stability of the pigment and understand the reactions, in this paper the problem is approached from various viewpoints. First of all the natural form cinnabarite is compared with the artificially prepared pigment vermilion. This establishes a differentiation of types in terms of quality, depending on structural impurities. With regard to the pigment’s reactions influencing the discoloration, the most commonly mentioned environmental factors, such as radiation or halogens, are evaluated. In relation to various usages, the pigment’s structural stability is then viewed in connection with adjacent pigments, glues, and the substrate, which may lead to a brown or black coloration or even the release of mercury, whereas the color is preserved in most cases when used on lime or in ink and lacquer. Due to the materials’ properties, attention is drawn to the fact that discoloration to a brownish-black is not necessarily a sign of damage and harmful reaction products, but may indicate good preservation of the painted material, provided that the mercury can be bound in the substrate.
The paintings and manuscripts discovered in the sealed ‘library cave’ in Dunhuang, Western China, contain the earliest surviving examples of Tibetan artistic and scribal practice (9the10th centuries AD). Despite their importance, their material characteristics have not previously been studied. The present paper discusses the results of the analysis of paper and pigments in a selection of items across a variety of forms and functions: (i) Buddhist manuscripts, (ii) official letters, (iii) hung paintings, (iv) ritual items, (v) banners, and (vi) stencils and preliminary sketches. The material analysis of these items is presented in historical context, to address three research questions. First, whether there is a correspondence between the materials used in the creation of these objects and their geographical origin. Second, in terms of the choices made in the available materials and techniques, whether there is a detectable correlation between materials chosen and the intended function of the objects. Third, whether the characteristics of the objects analysed here be considered to be part of a broader Central Asian artistic and scribal culture. The authors conclude that a local culture of paper and pigment production can be detected in these results, though further research is needed especially on the geographical origin of raw materials for pigments. The results show that artists and scribes made technological choices in paper and pigments depending on the function of the objects they were creating. Finally, understanding of the broader Central Asian context of these results will depend on future analysis of material from other archaeological sites, and comparison with the results of this study.
Schlaffe und vorgespannte Bewehrungen in Stahlbetonbauwerken lassen sich in einer Tiefe von etwa 30 – 35 cm gut mit dem Radarverfahren orten. In der Praxis zeigt sich aber häufig, daß der zeitliche Aufwand für eine Radarmessung stark variieren kann. Gründe dafür sind zum einen die Komplexität der Bewehrung im Betonbauteil, zum anderen aber auch die Unsicherheit des Anwenders bei der Durchführung der Radarmessung. Die Frage, ob die Bewehrung schon mit der Messung entlang einer einzelnen Messlinie gefunden werden kann, oder ob eine flächige Messung notwendig ist, kann häufig nicht schnell und einfach beantwortet werden.
Bei flächigen Radarmessungen ist ein wesentlicher Punkt dabei die Frage, wie dicht das Messraster sein soll. In der Praxis stellt sich häufig im Nachhinein heraus, daß ein weniger dichtes Raster mit einem Messlinienabstand von 10 cm oder 20 cm statt eines dichteren Rasters von z. B. 5 cm Messlinienabstand keine merkliche Verschlechterung des Ergebnisses beim Orten der Bewehrung liefert. Der zeitliche Aufwand für eine Radarmessung kann sich deshalb bei einer aufgabenbezogenen Wahl des Messrasters im Vergleich zur ursprünglichen Messung um deutlich mehr als die Hälfte verringern. Seltener tritt in der Praxis der Fall auf, daß ein Messraster zu groß gewählt wurde.
Anhand von Praxisbeispielen werden die Unterschiede von Radarergebnissen bei einer Variation von Messrastern gezeigt. Die Wahl eines aufgabenbezogenen Messrasters wird ebenso wie die Wahl einer geschickten Antennenpolarisation bei der Ortung vorgespannter Bewehrung betrachtet und der Einfluss der Antennenpolarisation auf den Aufwand der Radarmessung diskutiert. Abschließend wird ein kurzer Ausblick gegeben, was für ein Potential dichte Messraster trotzdem in der Forschung haben können.
Die vorliegende Dissertation befasst sich mit der Herstellung von programmierbaren, supramolekularen Multischichten und Komposit-Multischichten auf Gold- und Siliziumoberflächen durch Anwendung eines koordinationschemischen Schicht-auf-Schicht-Selbstorganisationsverfahrens und den damit verbundenen Synthesen, Beschichtungen und Analysen. Um dieses Ziel zu erreichen, wurde zunächst eine Vielzahl von pyridin- und terpyridinterminierten selbstorganisierten Monoschichten (SAM) hergestellt und auf Gold- und Siliziumoberflächen abgeschieden. Die Abscheideprozedur wurde optimiert wobei zur Analytik der Oberflächen Röntgenphotoelektronenspektroskopie (XPS), winkelabhängiger kantennaher Röntgenabsorptionsfeinstrukturspektroskopie (NEXAFS-Spektroskopie), Flugzeit-Sekundärionen-Massenspektrometrie (ToF-SIMS), Transmissions-UV/Vis-Spektroskopie sowie Rasterkraftmikroskopie (AFM) eingesetzt wurde. Es konnte gezeigt werden, dass sich hochgeordnete monomolekulare und gemischte Monoschichten erzeugen lassen. Die terminalen funktionellen Gruppen dieser SAMs konnten als Ligand zur Komplexbildung mit Übergangsmetallionen verwendet werden.
Diese koordinative Haftschicht wurde zur Verknüpfung zunächst von Testliganden und später von terpyridin-terminierten Tetralactam-Makrozyklen (TLM) und darauf basierenden Etherrotaxanen verwendet. Hierbei wurden ebenfalls die Beschichtungsbedingungen optimiert, um einen vollständigen Bedeckungsgrad zu erreichen. Unter Verwendung dieser Bedingungen wurden anschließend Multischichten aus TLMs und Fe(II)-Ionen sowie alternierend Fe(II) und Ni(II) abgeschieden. Die Analyse der hergestellten Multischichten zeigte reproduzierbar ein regelmäßiges, kontrollierbares Wachstum und eine Vorzugsorientierung. Durch den Einsatz von pyridin- und terpyridin-terminierten TLMs mit variierenden Metallionen konnte gezeigt werden, dass es möglich ist, die Abfolge verschiedener Schichten der Multischicht gezielt festzulegen.
Im weiteren Verlauf der Arbeit wurden pyridin-terminierte Goldnanopartikel hergestellt und in die Multischichten integriert, um so Komposit-Multischichten herzustellen. Letztlich konnte gezeigt werden, dass die erzeugten Multischichten genutzt werden können, um über nicht-kovalente Wechselwirkungen reversibel Gastmoleküle zu binden und freizusetzten.
We report on calibration standards of nanoparticles meeting the definition of a nanomaterial given by the European Commission (EU 2011) which are relevant for the characterisation methods applied in the NanoDefine project. We found that the Impact of nanoparticles is outstanding in the scientific literature. A number of 270.000 paper titles on nanoparticles are listed in the Web of Science data base. But surprisingly, the availability of suitable certified standard reference materials is scarce. Only a few sources were found. For example, BAM provides the database Nanoscaled Reference Materials at http://www.nano-refmat.bam.de/en/ in cooperation with the ISO/TC 229 Nanotechnologies. In addition, two publications from 2013 on nanoscale reference materials are available. Candidates of nano-(certified) reference materials from other ongoing or just finished FP6 and FP7 nano-metrology projects have been extracted from the Compendium of Projects in the European NanoSafety Cluster (Compendium NSC, 2013). Recommendations for selection of representative test materials and calibration standards for NanoDefine internal tasks, respectively, are also given.
The EU FP7 NanoDefine project was launched in November 2013 and will run until October 2017. The Project is dedicated to support the implementation of the EU Recommendation on the Definition of Nanomaterial
by the provision of the required analytical tools and respective guidance. Main goal is to develop a novel
tiered approach consisting of (i) rapid and cost-efficient screening methods and (ii) confirmatory measurement
methods. The "NanoDefiner" eTool will guide potential end-users, such as concerned industries and regulatory bodies as well as enforcement and contract laboratories, to reliably classify if a material is nano or not. To achieve this objective, a comprehensive inter-laboratory evaluation of the performance of current
characterisation techniques, instruments and software is performed. Instruments, software and methods are
further developed. Their capacity to reliably measure the size of particulates in the size range 1-100 nm and
above (according to the EU definition) is validated. Technical reports on project results are published to
reach out to relevant stakeholders, such as policy makers, regulators, industries and the wider scientific community, to present and discuss our goals and results, to ensure a continuous exchange of views,
needs and experiences obtained from different fields of expertise and application, and to finally integrate the resulting feedback into our ongoing work on the size-related classification of nanomaterials.
The need to improve the sustainability and the need for innovation in the cement industry has brought to light the practice of using additives to the cement in order to decrease CO2 emissions in industrial plants and increase the quality of cement in terms of durability and performance. Currently some additives have been employed as granulated blast furnace slag, limestone and pozzolan. The additives give mortar and concrete larger energy efficiency, gain in durability and resistance, contributing to buildings with slender structures and cheaper and durable maintenance. Besides natural pozzolan can be used artificial ones, as calcined clays, and over a range of amorphous aluminates and silicates waste, with highly reactive function as a binder material in the presence of water and calcium hydroxide. Calcined kaolinite clays were characterized using various techniques such as XRD, thermal analysis, and NMR observing 27Al and 29Si nuclei. The results showed that there is a structural modification of the samples, from crystalline to amorphous phases with the increasing of temperature in the calcination process. There is an improving in the reactivity of calcined clays by the range of 600ºC to 750ºC temperature in the reaction with calcium oxide, according to data from Chapelle test, indicating the possibility of using them as additives for cement and confirming their pozzolanic potential.
Zur Onlineüberwachung von Fermentationsprozessen werden zunehmend schwingungsspektroskopische (Raman-, Mittel- und Nahinfrarotspektroskopie (NIRS) und UV-/VIS- Methoden(Absorptions- und Fluoreszenzspektroskopie) in Kombination mit multivariater Auswertung eingesetzt. Anliegen dieser Arbeit war es, zu testen, welche Verfahren für die spektroskopische On- und Offlineüberwachung des Fermentationsprozesses zur biotechnologischen Herstellung einer Malariavaccine grundlegend geeignet sind und welche Messbereiche und Genauigkeiten der Vorhersage im Idealfall bei der Abwesenheit von Hefezellen erzielt werden können.
The project InPROMPT aims to establish a robust hydroformylation reaction process of the alkene n-dodecene to the aldehyde n-tridecanal using a rhodium complex as catalyst in the presence of syngas. This industrial relevant production process demands further research for optimization and expansion. For that purpose, the fiber optic coupled probe of a process Raman spectrometer is directly introduced in the product stream, which enables the recording of spectra within short control intervals.
Medium resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and process monitoring. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra were treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprised direct integration, automated line fitting, indirect hard modeling, and partial least squares regression.
Die Abtrennung von CO2 aus industriellen Gasströmen ist eine großtechnisch wichtige Trennaufgabe. Neben der Aufarbeitung von Erdgas werden diese Verfahren zur Verminderung der CO2-Emission durch industrielle Rauchgase, insbesondere für alternativlose Prozesse wie die Stahl- und Zementproduktion diskutiert.
Optical and scanning electron microscopy, as well as electron microprobe analysis and electron backscatter diffraction, have been used to study diffusion processes that occur in a diffusion pair that consistsof a single-crystal CMSX-10 nickel-base superalloy and polycrystalline nickel, at temperatures of 1050–1250°C. It has been found that, in this system, the distributions of γ-stabilizing elements (Cr, Co, W, and Re) are described by the Boltzmann solution for diffusion between two semiinfinite plates of a binary alloy. The processing of these distributions has shown that the diffusion coefficients of Cr, Co, W, and Re in the multicomponent system are close to those in binary alloys of these elements with Ni. The diffusion redistribution of the elements leads to the dissolution of the γ′ phase in the nickel-base superalloy, growth of nickel grains toward the superalloy constituent of the diffusion pair, and the formation of porosity on both sides of the migrating interface, which is determined from a crystal misorientation of the alloy single crystal and nickel grains.
Computational Advances
(2014)
Symmetry and Euler angles
(2014)
The one-phase methods described in Chapter 2 were shown to be able to predict casting to some extent, but could not depict segregation, sedimentation and blockage occurring during flow. On the other hand, the distinct element methods described in Chapter 3 did not take into account the presence of two phases in the system and describes concrete as distinct elements interacting through more or less complex laws. A reliable numerical model of a multiphase material behaviour shall take into account both phases (solid and liquid). From the numerical point of view, concrete flow shall be seen therefore as the free surface flow of a highly-concentrated suspension of rigid grains.
Dieses jährliche Netzwerktreffen hat sich als Diskussionsplattform zu allen Themen rund um die Prozessanalysenmesstechnik etabliert und es erwarten uns spannende Vorträge und Diskussionen. Wir freuen uns dieses Jahr Ihr Gastgeber zu sein. Endress+Hauser ist ein weltweit tätiger Anbieter von Automatisierungslösungen. Als Kompetenzzentrum für Flüssigkeitsanalyse bietet Endress+Hauser Conducta mit eigenen Produktionsstandorten in Deutschland, Asien und den USA ein breites Spektrum von Sensoren und Messsystemen für die Prozessanalysentechnik (PAT). Exzellente Produkte und zukunftsweisende Dienstleistungen und Lösungen unterstützen die Prozesse der Kunden seit über 60 Jahren.
Das diesjährige Kolloquium hat den Schwerpunkt „Prozessanalytik in der Biotechnologie“. Erste biotechnologische Verfahren wurden bereits vor mehreren 1000 Jahren angewandt zur Herstellung von Brot oder auch Bier und Wein aus Hefen. Heute treiben biotechnologische Verfahren Innovationen auf vielen Gebieten und deren Bedeutung in der Produktion von Lebensmitteln, landwirtschaftlichen Produkten, Arzneimitteln und Impfstoffen sowie Chemikalien steigt überproportional an. Biotechnologische Prozesse erlauben es zum Beispiel Proteine, Antikörper oder Vakzine maßgeschneidert und gezielt für den therapeutischen Einsatz herzustellen. Die Wirtschaftlichkeit der biologischen Prozesse hängt in hohem Maße davon ab, dass die richtigen Bedingungen geschaffen werden, damit die Mikroorganismen oder Zellkulturen optimal wachsen und die Erträge stabil und vorhersagbar maximiert werden können. Dieses stellt neue Anforderungen an die Sensorik und auch an die prozessanalytischen Werkzeuge für die Prozessautomatisierung. Darüber hinaus fördert die PAT-Initiative der FDA und das Streben nach Operational Excellence den Einsatz der Prozessanalysentechnik. Intelligente digitale pH und Sauerstoffsensoren ermöglichen eine zuverlässige Steuerung von biotechnologischen Verfahren bei gleichzeitig intuitiver Bedienung und sicherer Diagnose des Sensorzustandes. Biotechnologische Hochdurchsatzanalytik wird zur Optimierung in der modernen Pflanzenzüchtung eingesetzt. Innovative Modelle helfen die biotechnologischen Prozesse und deren Analytik zu verstehen und zu beschreiben. Wir wünschen Ihnen ein erfolgreiches Kolloquium mit vielen anregenden Diskussionen im TRIALOG zwischen den Forschern, Geräteherstellern und Anwendern.
Auch dieses Jahr war das interdisziplinäre Doktorandenseminar, organisiert von den Arbeitskreisen Prozessanalytik, Chemometrik und Qualitätssicherung, Chemo- und Biosensoren und Elektrochemische Analysenmethoden der Fachgruppe für Analytische Chemie der GDCh und erstmals in Kooperation mit den kreativen jungen Verfahrensingenieuren (kjVIs), wieder gut besucht und für alle Teilnehmer eine ausgezeichnete Gelegenheit zum interdisziplinären Wissensaustausch. Das Seminar fand wie bereits in den vergangenen zwei Jahre in Berlin statt, in der Eventpassage Nähe Bahnhof Zoo, grossartig vorbereitet und geleitet von Dr. Michael Maiwald und Grit Seifert, von der BAM Bundesanstalt für Materialforschung und -prüfung.
Die Vorträge der nächsten beiden Tage umfassten ein breites Themen-, Methoden- und Anwendungsspektrum von Applikationen im Mikrobereich, wie etwa der Entwicklung eines Chips als Leitfähigkeitssensor zur Bestimmung des CO2-Partialdrucks am Oxygenatorausgang während extrakorporaler Membranoxygenierung bis hin zu grossen Massstäben wie etwa der Sortierung von Altholz mit Nahinfrarotspektroskopie. Die vielen hoch interessanten Vorträge aus verschiedenen Bereichen und Technologien, wie NMR-Spektroskopie, Elektrochemie, Fluoreszenz-Spektroskopie, Surface enhanced Raman scattering (SERS), regten zu konstruktiven Diskussionen an und gaben Einblicke in wissenschaftliche Bereiche und deren Anwendung, die über den eigenen Themenbereich hinaus gehen.
Die interdisziplinäre Ausrichtung und Vielfalt der verschiedenen Forschungsbereiche spiegelte sich auch in der Postersession wieder. Die Themen umfassten etwa den Versuch zur Diskriminierung einer Lungenkrebszelllinie durch Honigbienen, die parallelen Analyse von Mikroschadstoffen in Wasser, sowie die Kombination von faser-optischer Methoden zur Inline Multiparameterprozessanalytik, um nur einige zu nennen.
In this contribution a Raman spectrometer based control structure for the heating of a desorption column is proposed. For this purpose calibration experiments for the absorption of carbon dioxide using monoethanolamine solutions are carried out and calibration models are developed to measure both carbon dioxide liquid loads and monoethanolamine mass fractions. The calibration experiments are supported by online NMR spectroscopy to accurately measure the appearance of all species in the electrolyte system. Both models are tested during the plant operation of a mini-plant for the oxidative coupling of methane and the proof of concept for the control structure is given. The Raman spectroscopy implemented in the ATEX conform mini-plant shows a reliable and robust performance being even indifferent to impurities hindering the GC analysis.
Hydroformylation in microemulsions under mild reaction conditions is investigated using a Rhodium-based catalyst yields high selectivity of 98:2 of the desired linear product. A successful mini-plant operation for over 130 hours was performed. Online concentration monitoring of the system was done using 785nm Raman spectrometer.
Der Vortrag stellt die aktuellen Forschungsschwerpunkte zum Thema Prozessanalytik an der Bundesanstalt für Materialforschung und -prüfung (BAM) vor und nennt aktuelle Entwicklungsfelder mit dem Ziel gemeinsamer F&E-Projekte. Zunächst wird die Prozessindustrie und ihre Wertschöpfungskette vorgestellt. Daraus ergibt sich eine Motivation für Prozessanalytik. Zwischen der Prozessanalytik in der Pharmazeutische Industrie und der Chemischen Industrie bzw. Verfahrenstechnik gibt es Unterschiede, die herausgearbeitet werden. Der Vortrag schließt mit Technologiewünschen und Technologievisionen und nennt Konkrete Beispiele für Visionen für PAT, insbesondere im Kontext des Zukunftsprojekts „Industrie 4.0“
This survey will discuss current and emerging isothermal and rapid polymerase chain reaction (PCR) based nucleic acid amplification methods for patient near diagnostics. To assess the clinical need of rapid diagnostics for infectious diseases based on nucleic acid tests (NATs) we performed and analysed a questionnaire among laboratories participating in corresponding INSTAND ring trials for external quality assurance. The questions concerning new amplification technologies like isothermal nucleic acid amplification, potentially suited to significantly decrease turnaround times, were complemented by questions to evaluate the present status of NATs. Besides end-users, companies were also addressed by sending out a manufacturer specific questionnaire. Analysis of the answers from 48 laboratories in 14 European countries revealed that a much shorter turnaround time is requested for selected pathogens compared to about 2 h or longer when applying temperature cycling amplification, i.e. PCR. In this context, most frequently mentioned were MRSA, norovirus, influenza A and B viruses, cytomegalovirus (CMV) as well as hepatitis B virus (HBV) and hepatitis C virus (HCV). At present, 8% of the laboratories having participated in this survey apply isothermal amplification of nucleic acid to identify infectious pathogens.
Starch is one of the most common and easily obtained natural polymers, making it attractive as a potential bio-based alternative to synthetic polymers. This study shows that a simple quaternary ammonium salt combined with urea or glycols forms effective modifiers that produce flexible plastics with good mechanical properties that are comparable to some polyolefin plastics. The processing conditions are shown to significantly affect the structure of the polymer which has a concomitant effect upon the mechanical and physical properties of the resulting plastic. Using a glycerol based modifier results in a totally sustainable and biodegradable material which can be injection moulded.
Die Ortung von schlaffer Bewehrung in Beton erfolgt routinemäßig mit bildgebenden Radar- oder Wirbelstromverfahren. Die Anwendung dieser Verfahren ist aber begrenzt, wenn es sich um die Ortung tiefliegender Bewehrung (ab ca. 30 cm) oder um jungen Beton handelt. Grund ist die Schwächung der Radarpulse durch oberflächennahe Bewehrung oder durch die Betonfeuchte. Das bildgebende Ultraschallechoverfahren bietet den Vorteil, dass die Ultraschallpulse in diesen Fällen eine wesentlich höhere Eindringtiefe erreichen.
Im vorliegenden Beitrag wird eine Fallstudie vorgestellt, bei der mehrlagig eingebrachte Bewehrungseisen in einer nur einseitig zugänglichen 60 cm dicken Betonplatte geortet werden sollten, um eine Kernbohrung ohne Verkanten der Bohrkrone durchzuführen.
Zur Ortung der Bewehrung wurde das Ultraschallechoverfahren mitScherwellen der Mittenfrequenz 50 kHz mit einem automatisch arbeitenden Bauwerksscanner eingesetzt. Aus den flächig aufgenommenen Messdaten wurde mit der Rekonstruktionsrechnung nach dem Prinzip der synthetischen Apertur (SAFT, Synthetic Aperture Focusing Technique) die Position der Bewehrungseisen bildhaft ortsgenau dargestellt. Dies gelingt mit einer Auswertungsoption, bei der die Phase der reflektierten Ultraschallpulse ermittelt und farbcodiert dargestellt wird (Phasenauswertung). Damit lassen sich Reflexionen der Bewehrung eindeutig von eventuellen Fehlstellen oder Rückwandechos unterscheiden.
Klebverbindungen im modernen Hochbau können helfen, innovative ästhetische Bedürfnisse im Fassadenbau umzusetzen, technologische Verbesserungen zu erreichen, aber auch die Wechselwirkung von Gebäuden mit der Umwelt unter energetischen Aspekten zu optimieren. Aufgrund der hohen sicherheitstechnischen Bedeutung gibt es hohe Anforderungen an die Leistungsfähigkeit, Dauerhaftigkeit und die Gütesicherheit.
Mit einer zerstörungsfreien praxistauglichen Prüftechnik, die eine sichere Überprüfung der Integrität von Glas-Metall Klebverbindungen im Ingenieurhochbau gewährleistet, kann sowohl ein wichtiger Beitrag zur Qualitätssicherung bei der Herstellung von Fassadenelementen aber auch bei der späteren Bauwerksüberwachung im Verlauf der Nutzungsdauer geleistet werden. Für eine Beurteilung der Qualität der Verbundfuge (z.B. bezgl. Standsicherheit) sind dabei Aussagen zur Homogenität der Verbundfuge, zum adhäsiven und kohäsiven Verbundverhalten gefordert. Hierzu besteht aktuell insbesondere Bedarf an zerstörungsfreien praxisgerechten, hoch ortsauflösenden und möglichst bildgebenden Untersuchungsverfahren.
Es wird mit einem Matrixarray und mit konventionellen Winkelprüfköpfen eine Prüftechnik vorgestellt, mit der die Wechselwirkung zwischen Ultraschallwelle und Fehlstelle in der Klebefuge untersucht wird. Hierbei ist das erste Untersuchungsziel, mit einer angepassten Ultraschall-Prüftechnik mögliche Inhomogenitäten oder Schädigungsstellen in der geklebten Glas-Metall Verbindung zu detektieren.
Über diese qualitativen Aussagen hinaus werden weiterführende Informationen über die flächenhafte Ausdehnung und den Ort einer mangelnden Klebung ermittelt. Dazu werden die Messwerte zusammen mit den Positionen des Ultraschallprüfkopfs aufgezeichnet. Mit Hilfe einer bildhaften Auswertung der gemessenen Ultraschallechos in Abhängigkeit vom Prüfkopfort werden die Möglichkeiten einer detaillierten Integritätsanalyse der Glas-Metall Klebschicht dargestellt. In diesem Beitrag werden experimentelle Prüfergebnisse vorgestellt, die im Sinne einer Verfahrensvalidierung an einem speziellen Beispielprobekörper zur Nachstellung einer SSG-Verglasung (ermittelt wurden und die Detektion fehlerhafter Klebestellen in einer Glas-Metall-Klebverbindung zum Ziel haben.
Slicing - a new method for non destructive 3D elemental sensitive characterization of materials
(2014)
Recent advances in synchrotron sources and detector technology have led to substantial improvements in spatial resolution and detection limits for X-ray fluorescence analysis (XRF). However, the non-destructive three-dimensional elemental sensitive characterization of samples remains a challenge. We demonstrate the use of the so-called 'Color X-ray Camera' (CXC) for 3D measurements for the first time. The excitation of the sample is realized with a thin sheet-beam. The stepwise movement of the sample allows getting the elemental distribution for each layer with one measurement. These layers can be combined to a full 3D dataset for each element afterwards. Since the information is collected layer by layer, there is no need to apply reconstruction techniques, which quite often are the reason for artifacts in the results achieved by computed tomography (CT). The field of applications is wide, as the 3D elemental distribution of a material contains clues to processes inside the samples from a variety of origins. The technique is of special interest and well suited for biological specimens, because their light matrix minimizes restricting absorption effects. Measurement examples of a hornet and the teeth of a Sorex araneus are shown.
Quantitative determination of acidic surface sites is highly important for the characterization of solid acids because the activity of a catalyst is often related to the concentration of these sites. A recently developed method using 15N Nuclear Magnetic Resonance spectroscopy (NMR) for the quantification of acidic Lewis and Brønsted sites has been tested for a series of nanoscopic aluminum hydroxide fluorides. Comparison with other methods for the quantitative determination of acidic sites shows that this 15N NMR quantification method is a promising technique for the comprehensive investigation of acidic sites. Three different acidic sites, one Brønsted and two Lewis sites, can be distinguished by their 15N chemical shifts of pyridine and simultaneously quantified under conditions corresponding to catalytic reaction conditions. Determination of the individual concentrations of acidic sites allows further insight into the catalytic process. It was found that the concentration of Brønsted sites correlates with catalyzed conversion of citronellal to isopulegol in the investigated series of catalysts. Additionally, investigations indicate that one of the Lewis sites become blocked during the reaction of citronellal.
The digital photography has almost completely substituted the film photography. The film replacement is also fast progressing in medical X-ray radiography. This process is slower in NDT and especially in Europe. Reasons for the hesitating change to digital radiography (RT-D) in NDT are the necessary time for adoption of standards and the conservative request for film RT by auditors and NDT managers for applications in large plants and at construction areas. The fast serial inspection for small castings is already almost completely dominated by RT-D due to the cost effective short exposure and interpretation times. Standards were developed in parallel at CEN, ISO, ASTM and ASME. Unfortunately, the standard practices are different and the requirements on image quality and useable hardware are different too. The first standard series on Computed Radiography were developed and published by CEN and ASTM in 2005. Harmonized classification and qualification standards are available but the published practices are different. ASTM has developed the first standards for application of Digital Detector Arrays (DDA) in 2010. The first digital RT ISO standard practice is ISO 17636-2 (2013), which describes the practice for application of DDAs and Imaging Plates for weld inspection. At the first time this standard provides requirements for the selection of suitable hardware. Minimum image quality requirements are specified in analogy to film radiography and 3 Compensation Principles are defined to enable the application of a wider range of digital detectors. A comparison of the different international digital RT standards is given and first experiences with ISO 17636-2 are discussed. New standards on RT wall thickness and corrosion measurements (EN 16407, film and digital) have been developed recently.
A comparative study on the performance of digital detector systems for high energy applications
(2014)
For cast components reaching or exceeding total material thicknesses of 150mm, high energy sources such as linear accelerators or Betatrons are required in order to obtain reasonable exposure times. In this study, the performance of digital detector systems, involving imaging plates (IP) and digital detector arrays (DDA), was evaluated with respect to the testing class B requirements as formulated in the standard EN ISO 17636-2. As a reference, traditional radiographic film and a Cobalt-60 source was used. With film exposures, testing class B was achieved with Co-60 and Betatron (7.5 MV) at longer exposure times. The preliminary results show that the testing class B was not obtained with the examined digital detector arrays (DDA) and the high resolution imaging plates (IP) , even at 40, 60 and 80 minutes exposure time with a 7.5 MV Betatron. Class A was achieved using high resolution imaging plates with optimized metal filters between object and IPs and a high resolution DDA with intermediate Cu filters. Class A was also achieved applying a DDA with lower basic spatial resolution than required by Table B.13 of EN ISO 17636-2, but using the compensation principle as described in this standard. The next generation of digital detector arrays might potentially be able to obtain class B performance with the expected spatial resolution and sensitivity improvements.
The progress in X-ray detector electronics (sensitivity and speed) allows meanwhile fast single photon detection by a matrix detector. Combined photon counting and energy discrimination is implemented in the electronic circuit of each detector pixel. The company XCounter developed detectors based on CdTe single crystals, which can be tiled to larger areas and have a pixel size of 100ìm. The largest area available in beginning of 2014 is 50x75 mm². These detectors have very promising properties, which make them very suitable for NDT applications:
1. A CdTe attenuation layer of 750 µm thickness allows efficient X-ray detection up to ca. 300 keV. In counting mode only photon noise is important; no other detector noise sources need to be considered. There is no Offset signal without radiation.
2. Each of the detector pixels has two energy thresholds. These can be used for dual energy imaging for materials separation. Also the suppression of scattered radiation by energy thresholding will improve the image contrast sensitivity. First experiments will be presented which demonstrate the advantages of this new detector technology over the conventional charge integrating detectors.
A challenge is the development of a modified detector calibration procedure, which becomes critical at longer exposure times.
Using ultrafast X-ray diffraction, we study the coherent picosecond lattice dynamics of photoexcited thin films in the two limiting cases, where the photoinduced stress profile decays on a length scale larger and smaller than the film thickness. We solve a unifying analytical model of the strain propagation for acoustic impedance-matched opaque films on a semi-infinite transparent substrate, showing that the lattice dynamics essentially depend on two parameters: One for the spatial profile and one for the amplitude of the strain. We illustrate the results by comparison with high-quality ultrafast X-ray diffraction data of SrRuO3 films on SrTiO3 substrates.
Innovative X-ray backscatter technique for security applications: Detection of dangerous materials
(2014)
Radiological inspections, in general, are NDT&E methods to detect the bulk of explosives without invasion into the object of analysis. In contrast to personal luggage, cargo or structural components constitute a complexity that may significantly hamper the detection of a threat by conventional transmission radiography. A novel approach of interrogating a large object to a certain depth only with a single sided access will be presented. It consists of an X-ray backscatter camera with a special twisted slit collimator for imaging backscattered objects. The new X-ray backscatter camera is not only imaging the objects due to their densities but also by taking into account the influences of surrounding objects. Additionally, it does not only image illuminated features but also depicts shadows from absorbing materials. This is a unique characteristic of the developed X-ray backscatter camera. Experimental mock-ups are conducted imitating container with threats among a complex packing as they may be encountered in reality. At the end, the significant advantages of the presented X-ray backscatter camera in the context of aviation and port security will be discussed.
In this contribution, we present a dual high-energy X-ray imaging technique for cargo container inspection using the 'spectral high-energy X-ray attenuation method'. This method is based on attenuation of continuous highenergy spectra. The developed experimental technique consists of a betatron as high-energy (up to 7.5 MeV) X-ray source and a matrix detector with high spatial resolution (400 ìm) for digital X-ray imaging. In order to evaluate the material discrimination capability using dual high-energy X-ray imaging, a test specimen is proposed, comprising step wedges of different low and high atomic number (Z) materials. The selected X-ray spectra for the dual-energy experiments correspond to 3 MV and 7.5 MV acceleration potential of the betatron. We evaluated the ratio between low- and high-energy X-ray attenuation coefficients quantitatively based on simulated poly-energetic high-energy X-ray source spectra and the detector sensitivity using the 'analytical Radiographic Testing inspection simulation tool' (aRTist) developed at BAM. The simulated effective attenuation coefficients are compared with corresponding experimental results in order to establish a method for identification of low- and high-Z materials in the container. Finally, important applications of the proposed technique in the context of aviation security are discussed.
Critical parts in aircraft manufacturing such as stringers are very commonly used in modern aircraft structures to resist the compressive loads caused by the aerodynamic effects. They are generally made-up of thin aluminium (Al) metal sheets and are one of the key components in the aircraft wings. Any defects in the stringer leads to weakening of the stiffness of the whole wing structure and consequently, failures may occur. Hence, the structural integrity of the stringers should be evaluated using reliable non-destructive testing (NDT) methods. Due to the complex shaped structure of the stringer, the one-sided access NDT method such as X-ray backscatter technique is more preferable for the non-destructive imaging. In this paper, we present a new X-ray backscatter technique to image the internal sections of the stringer with only a single-sided access. The whole object was inspected by changing the viewing direction of the X-ray backscatter camera. For the first time, the X-ray backscatter measurements were conducted using high-energy (> 0.5MeV) X-rays and proved the applicability of the present technique to inspect thick carbon-fiber laminated components. In order to improve the inspection time and image quality of the backscatter image, we used high-resolution (180ìm) digital detector arrays (DDAs). At the end, important applications of the presented X-ray backscatter technique to the aerospace industry are discussed.
Genetic transformation of Knufia petricola A95 - a model organism for biofilm-material interactions
(2014)
We established a protoplast-based system to transfer DNA to Knufia petricola strain A95, a melanised rock-inhabiting microcolonial fungus that is also a component of a model sub-aerial biofilm (SAB) system. To test whether the desiccation resistant, highly melanised cell walls would hinder protoplast formation, we treated a melanin-minus mutant of A95 as well as the type-strain with a variety of cell-degrading enzymes. Of the different enzymes tested, lysing enzymes from Trichoderma harzianum were most effective in producing protoplasts. This mixture was equally effective on the melanin-minus mutant and the type-strain. Protoplasts produced using lysing enzymes were mixed with polyethyleneglycol (PEG) and plasmid pCB1004 which contains the hygromycin B (HmB) phosphotransferase (hph) gene under the control of the Aspergillus nidulans trpC. Integration and expression of hph into the A95 genome conferred hygromycin resistance upon the transformants. Two weeks after plating out on selective agar containing HmB, the protoplasts developed cell-walls and formed colonies. Transformation frequencies were in the range 36 to 87 transformants per 10 µg of vector DNA and 106 protoplasts. Stability of transformation was confirmed by sub-culturing the putative transformants on selective agar containing HmB as well as by PCR-detection of the hph gene in the colonies. The hph gene was stably integrated as shown by five subsequent passages with and without selection pressure.
In this article, the high potential of the fluorolytic sol–gel process to synthesize nanoscopic rare earth-doped calcium fluoride sols is shown. Through a fluorolytic sol–gel process we manage to achieve spherical monodisperse ~5 nm sized nanoparticles using a simple and reproducible one-pot-wet chemical route at room temperature. The as-synthesized clear sols exhibit an intense red and green luminescence under UV excitation at room temperature. A spectroscopic study of the sols revealed the characteristic transitions 5D0 → 7FJ of Eu3+ and 5D4 → 7FJ of Tb3+, with 5D0 → 7F2 (611 nm) of Eu3+ and 5D4 → 7F4 (581 nm) of Tb3+ as the most prominent transitions. This facile synthetic strategy is also valuable for developing other luminescent nanoparticles.
Der Large Hadron Collider (LHC) des europäischen Kernforschungszentrums CERN ist einer der weltweit größten und leistungsfähigsten Teilchenbeschleuniger. Um den Teilchenstrahl auf seiner Kreisbahn zu halten, werden mit Hilfe supraleitender Spulen sehr starke Magnetfelder erzeugt. Die hierzu benötigten hohen Ströme werden über Verbunddrähte aus Niob-Titan und Kupfer geleitet.
Die Drähte werden u.a. durch Ultraschallschweißungen miteinander verbunden. Eine mangelhafte Verbindung kann zur Erwärmung der Kontaktstelle und in Folge davon zum Zusammenbruch der Supraleitung führen. Auf Anfrage des CERN wurden an der BAM Untersuchungen zur Prüfbarkeit solcher Verbindungen bei Umgebungstemperatur durchgeführt. Es gelang, für einen Verbindungstypen einen Wirbelstromsensor für eine manuelle Prüfung zu entwickeln. Ein Prototyp des Sensors befindet sich beim CERN in der praktischen Erprobung. Das Sensorprinzip sowie Prüfergebnisse aus Labor und Praxis werden vorgestellt.
A flexible, sustainable, one-step thermal decomposition route for the synthesis of hierarchical, heteroatom doped carbon foams is presented. Task-specific semi-organic crystals combine functions for three different purposes: the carbon and heteroatom source, a foaming agent (CO2) and an in situ generable template (NaCl). Insights to the decomposition pathway were gained through FTIR/MS coupled TGA and an ultrafast out-of-furnace heating procedure and the products were analysed with (HR)SEM/TEM, EELS, FTIR, and N2 sorption. The resulting macroporous carbon foams are excellent supports for metallic nanoparticles due to their hierarchical structure, high surface area and tuneable heteroatom contents. This was demonstrated for catalytically active copper or the magnetic CoNi alloy for water purification.
Structural properties of iron-phosphate glasses: spectroscopic studies and ab initio simulations
(2014)
Vitrification is the most effective method for the immobilization of hazardous waste by incorporating toxic elements into a glass structure. Iron phosphate glasses are presently being considered as matrices for the storage of radioactive waste, even of those which cannot be vitrified using conventional borosilicate waste glass. In this study, a structural model of 60P2O5–40Fe2O3 glass is proposed. The model is based on the crystal structure of FePO4 which is composed of [FeO4][PO4] tetrahedral rings. The rings are optimized using the DFT method and the obtained theoretical FTIR and Raman spectra are being compared with their experimental counterparts. Moreover, the proposed model is in very good agreement with X-ray absorption fine structure spectroscopy (XANES/EXAFS) and Mössbauer spectroscopy measurements. According to the calculations the Fe3+ is in tetrahedral and five-fold coordination. The maximal predicted load of waste constituents into the glass without rebuilding of the structure is 30 mol%. Below this content, waste constituents balance the charge of [FeO4]- tetrahedra which leads to their strong bonding to the glass resulting in an increase of the chemical durability, transformation and melting temperatures and density.
Rigid rod-type metallo-supramolecular coordination polyelectrolytes with Fe(II) centres (Fe-MEPEs) are produced via the self-assembly of the ditopic ligand 1,4-bis(2,2':6',2''-terpyridine-4'-yl)benzene (tpy-ph-tpy) and Fe(II) acetate. Fe-MEPEs exhibit remarkable electrochromic properties; they change colour from blue to transparent when an electric potential is applied. This electrochemical process is generally reversible. The blue colour in the ground state is a result of a metal-to-ligand charge transfer at the Fe(II) centre ion in a quasi-octahedral geometry. When annealed at temperatures above 100 °C, the blue colour turns into green and the formerly reversible electrochromic properties are lost, even after cooling down to room temperature. The thermally induced changes in the Fe(II) coordination sphere are investigated in situ during annealing of a solid Fe-MEPE using X-ray absorption fine structure (XAFS) spectroscopy. The study reveals that the thermally induced transition is not accompanied by a redox process at the Fe(II) centre. From the detailed analysis of the XAFS spectra, the changes are attributed to structural changes in the coordination sphere of the Fe(II) site. In the low temperature state, the Fe(II) ion rests in a quasi-octahedral coordination environment surrounded by six nitrogen atoms of the pyridine rings. The axial Fe–N bond length is 1.94 Å, while the equatorial bond length amounts to 1.98 Å. In the high temperature state, the FeN6-site exhibits a distortion with the axial Fe–N bonds being shortened to 1.88 Å and the equatorial Fe–N bonds being elongated to 2.01 Å.
The combination of complementary characterization techniques such as SEM (Scanning Electron Microscopy), T-SEM (Scanning Electron Microscopy in Transmission Mode), EDX (Energy Dispersive X-ray Spectroscopy) and SAM (Scanning Auger Microscopy) has been proven to be a powerful and relatively quick characterization strategy for comprehensive morphological and chemical characterization of individual silica and titania nanoparticles. The selected real life test materials, silica and titania, are listed in the OECD guidance manual as representative examples because they are often used as commercial nanomaterials. Imaging by high resolution SEM and in the transmission mode by T-SEM allows almost simultaneous surface and in-depth inspection of the same particle using the same instrument. EDX and SAM enable the chemical characterization of bulk and surface of individual nanoparticles. The core–shell properties of silica based materials are addressed as well. Titania nominally coated by silane purchased from an industrial source has been found to be inhomogeneous in terms of chemical composition.
Two design approaches for multifunctional information carriers are introduced. In the first one, quick response (QR) code carriers, which were composed of poly(ester urethane) (PEU) and microencapsulated thermochromic pigments (T-PIGs), differing in color and color switching temperature (CST), were prepared. The obtained material systems exhibited machine-readable QR codes at 23 °C and a two-stage decolorization when heated, culminating in unreadable QR codes at temperatures above the highest CST of the employed T-PIGs. In the second scenario, information carriers were sealed with a dark, thermochromic PEU layer. As a result, the QR codes were hidden at 23 °C and became readable upon heating due to color fading. Beyond the characterization of the employed components, preparation methods, functionality analyses and durability investigations are reported. When heated after thermo-mechanical programming, pronounced shape memory properties could be verified. The thermo-responsiveness of such multifunctional material systems may qualify them for usage in anti-counterfeiting applications.
Flash lamps are widely used excitation sources in the field of non-destructive testing with active thermography. Though the realized energy density in front of the investigated object is a significant factor with regard to detection sensitivity, only few data concerning this issue have been published so far. It is shown here that local energy densities can be estimated by means of a simple metal plate, which exhibits a certain temperature increase after flash excitation. After discussing the underlying calorimetric principle the sensor concept is reviewed using constant blackbody radiation and short laser pulses, since both kinds of sources generate known energy densities. The relative uncertainty of measurements of the energy density is found to be in the range of 10%. The last part of the present paper describes an application for characterizing the radiation of a usual 6 kJ flash lamp. The energy conversion efficiency was found to be only about 11%.
DNA origami nanostructures allow for the arrangement of different functionalities such as proteins, specific DNA structures, nanoparticles, and various chemical modifications with unprecedented precision. The arranged functional entities can be visualized by atomic force microscopy (AFM) which enables the study of molecular processes at a single-molecular level. Examples comprise the investigation of chemical reactions, electron-induced bond breaking, enzymatic binding and cleavage events, and conformational transitions in DNA. In this paper, we provide an overview of the advances achieved in the field of single-molecule investigations by applying atomic force microscopy to functionalized DNA origami substrates.
Fourier-Spektroskopische Untersuchungen von hochmolekularem Polyethylen (HMW-PE) und ultrahochmolekularem Polyethylen (UHMW-PE) im Mittleren - und Fernen Infrarotbereich können Veränderungen der molekularen Strukturen nachweisen, die durch Co60 γ-Strahlung und Rekristallisationsprozesse initiiert werden. UHMW-PE und HMW-PE sind im gewählten IR-Bereich unterscheidbar. Die integrale Absorption der B1u – Gitterschwingungen im Fernen Infrarotbereich (THz-Bereich) ermöglichen die quantitative Beschreibung des Kristallinitätsgrades und dessen Abbau. Die Bildung ungesättigter Vinylengruppen und der Abbau ungesättigter Methylengruppen können im Mittleren Infrarotbereich nachgewiesen werden.
The synthesis of the polymorphic cocrystal caffeine:anthranilic acid was investigated to obtain a better understanding of the processes leading to the formation of different polymorphic forms. In the case of these cocrystal polymorphs synthesized by liquid-assisted grinding a distinct influence of the dipole moment of the solvent was found. A pre-coordination between the solvent molecules and the caffeine:anthranilic acid cocrystal could be identified in the formation of form II. In the case of form II the solvent can be regarded as a catalyst. The formation pathway of each polymorph was evaluated using synchrotron X-ray diffraction.
Bikontinuierliche poröse Keramiken für Filteranwendungen weisen eine komplizierte Mikrostruktur auf, in der Poren und Festkörperphase 'vermischt' sind. Mechanische, thermische sowie Filtereigenschaften können nur präzise bestimmt werden, wenn die Morphologie beider Phasen quantitativ angegeben werden kann. Hier werden unter Anwendung von 3D Computertomographie (CT) und verschiedenen Techniken, die auf der Röntgenrefraktion basieren, die Porosität und die Porenorientierung in keramischen Cordierit-Dieselpartikelfiltern bewertet. Dabei werden zur Auswertung der Tomogramme die Fouriertransformierten sowie eine neu entwickelte richtungssensitive Bildanalyse (DIVA, directional interface variance analysis) angewandt. Sowohl die genannten Messtechniken als auch der statistische Ansatz gestatten die Extraktion optional ortsaufgelöster oder gemittelter Werte. Es ergeben sich sehr gute Übereinstimmungen der experimentell ermittelten Porositätswerte mit Ergebnissen aus Quecksilberintrusionsversuchen als auch der ermittelten Porenorientierung im Vergleich zu publizierten Angaben zur kristallographischen Textur. Dies legt den Schluss nahe, dass die Kenntnis der Grenzflächen (zwischen Poren und Materie) genügt, die morphologischen Eigenschaften solcher Materialien hinreichend zu beschreiben.