Analytische Chemie
Filtern
Erscheinungsjahr
- 2017 (907) (entfernen)
Dokumenttyp
- Vortrag (369)
- Zeitschriftenartikel (230)
- Posterpräsentation (193)
- Beitrag zu einem Tagungsband (62)
- Sonstiges (18)
- Buchkapitel (8)
- Forschungsbericht (8)
- Dissertation (7)
- Beitrag zu einem Sammelband (5)
- Tagungsband (Herausgeberschaft für den kompletten Band) (5)
Sprache
- Englisch (744)
- Deutsch (159)
- Französisch (2)
- Mehrsprachig (2)
Schlagworte
- Nanoparticles (47)
- Fluorescence (40)
- Nanoparticle (35)
- XPS (27)
- LIBS (26)
- Concrete (21)
- Quantum yield (21)
- NIR (20)
- Upconversion (20)
- Mechanochemistry (19)
Eingeladener Vortrag
- nein (369)
Ausgehend von dem in der Literatur beschriebenen Verfahren zur Bestimmung aromatischer Aminosäuren konnte eine Analysemethode zur Proteinbestimmung über die optische Detektion von Tyrosin und Phenylalanin nach chromatographischer Trennung der Protein-Hydrolysate entwickelt werden, die gegenüber dem Verfahren aus der Literatur erhebliche Vorteile besitzt. Der Einsatz von Rundbodenvials stellt eine Neuerung und kostengünstige Alternative zu der konventionellen Hydrolyse in Vakuumhydrolyseröhrchen wie auch zu den Mikrowellenvials der Mikrowellenhydrolyse dar, die das Potential für Miniaturisierungen der Proben hat und sich zudem für große Probendurchsätze eignet. Anstelle der Mikrowellenheizungen wurde ein konventionelles Ölbad als Heizquelle verwendet. Somit ergibt sich eine Verbesserung auch darin, dass diese Methode geringere Geräteinvestitionen erfordert. Wie die Ergebnisse nahelegen, sind sowohl Salzsäure als auch Bromwasserstoffsäure geeignete Reagenzien, die bei der sauren Hydrolyse von Proteinen verwendet werden können. Mit Hilfe antioxidativer Zusätze können Nebenreaktionen erfolgreich vermieden werden. Hier haben sich L-Cystein und Oxalsäure als wirkungsvolle Additive herausgestellt. Wichtige Verbesserungen betreffen vor allem die Zeitersparnis bei der Hydrolyse, die Aufarbeitung der Hydrolysate und die chromatographischen Separationen. Erstere konnte gegenüber der konventionellen Methode von 22 Stunden auf 45 Minuten reduziert werden. Die chromatographische Trennung wurde so weit optimiert, dass die Laufzeit von 64 auf 35 Minuten verkürzt werden konnte. Zudem konnte auf das zeitraubende und kontaminationsanfällige Eindampfen der Hydrolysate verzichtet werden. Während der Aufarbeitung der Hydrolysate konnten die Menge eingesetzter Chemikalien reduziert und damit mögliche Störungen während der optischen Detektion verringert werden. Letztere wurde zum einen durch das Einbeziehen der UV-Absorption bei 260 nm erweitert, sodass eine Alternative zur Absorption bei 215 nm vorliegt, die ebenere Basislinien im Chromatogramm ermöglicht. Zum anderen wurde gezeigt, dass mit Hilfe der Fluoreszenz die Empfindlichkeit der Methode gegenüber der UV-Absorption erheblich verbessert werden kann. Anhand der Probe eines Birkenpollenextraktes ließ sich die Anwendbarkeit der optimierten Methode auf Realproben demonstrieren.
In this thesis a protocol based on a direct competitive and non-competitive immunoassay using the microarray format was developed to screen emulated hybridoma supernatants against the drug carbamazepine (CBZ). As support, epoxy slides were manufactured by coating microscope glass slides with epoxy silanes. The manufactured epoxy slides showed similar capacity for protein immobilization as commercially available NEXTERION slides, but showed a higher autofluorescence background. On the epoxy slides, protein A, Cys-A, G and Cys-G were immobilized as antibody capturing coating. It could be shown that the Cys-tag considerably increased the immobilization of all compared proteins, especially of protein G. Protein Cys-G immobilized at pH 8-9 was considered the most suitable protein for antibody immobilization due to good spot uniformity and a high binding capacity for IgG. Additionally, in immobilization experiments it could be shown, that 10-500 fold excess of bovine IgG, introduced by two different fetal bovine serum (FBS) products, showed no significant competition on the immobilization of mice or goat IgG on protein Cys-G. To examine the captured antibodies for affinity to CBZ, the CBZ-TOTA-DY654 tracer was custom synthesized. It could be demonstrated, that the tracer antibody interaction was competitive with the tracer precursor, CBZ-TOTA-NH2 and CBZ. Furthermore, the synthesized tracer was also successfully used by externals to evaluate CBZ affine hybriodoma cells in flow cytometry. In the simulated screening, five antibodies with known affinity to CBZ were diluted in a cell culture medium. The screening method allowed to differentiate between affine antibodies (IC50 < 20 µg/ml) and unaffine antibodies (IC50 > 20 µg/ml), when concentrations of 0.1 µg/ml IgG or greater have been used. Of five applied antibodies, all highly affine clones (CE2 and B3212M) were reported as positives while no false-positive samples were observed. The screening included competitive, with around 89500 fold excess of CBZ, and non-competitive tracer incubation on different segments of the same chip, which resulted in total signal suppression on the competitive segment. The screening was performed in 20 hours, only a few nanoliters, of each simulated supernatant, were consumed in the screening process, furthermore in the method standard 96 well MTPs were used and no cleanroom facilities were required.
Im Rahmen eines BMWi Projekts der Fa. Innovent Jena, bei dem ein neuartiger optischer Sensor zur Bewertung der Oberflächenqualität und Reinheit von optischen Gläsern im Fokus stand, wurden die abbildende Ellipsometrie, die IR-Mikroskopie und die Weißlichtinterferenzmikroskopie als Referenzverfahren herangezogen. Mittels Brewster-Winkelmessungen konnten „Wolkenstrukturen“ identifiziert werden, die bei nachfolgenden Beschichtungsprozessen zu Schichtdefekten führen können. Außerdem wurden mittels Ellipsometrie Änderungen im Brechungsindex der Floatgläser (Luft- bzw. Zinnseite) nachgewiesen. Topographie Oberflächenmerkmale wie Welligkeit, Rauheit und Kreuzrillen konnten mittels Weißlichtinterferenzmikroskopie bzw. abbildender Ellipsometrie identifiziert werden.
Das Projekt KONTRAST adressiert die Qualitätskontrolle (QC) zur Erfassung nano- und mikroskaliger Belegung/Degradation mittels abbildender Ellipsometrie (IE). Das BAM-Teilvorhaben beinhaltet das Screening von Benchmark-Materialsystemen und die Validierung von Messstrategien. Im Ergebnis erfolgte eine Fokussierung auf das im Vergleich zur off Null Ellipsometrie (ONE) aussichtereichere Verfahren der referenzkompensierten Ellipsometrie(RKE), das marktstrategisch in RSE (referenced spectral ellipsometry) umbenannt wurde. Alle Materialsysteme der BAM-Unterauftragnehmer konnten mit IE visualisiert werden, mit dem RSE-System in wesentlich kürzeren Zeiten, auf größeren Flächen, bei vergleichbarer Empfindlichkeit und Auflösung, Komplementärverfahren waren für den schnellen Nachweis nano- und mikroskaliger Belegung nicht konkurrenzfähig, wobei zusätzliche Materialsysteme mit niedrigem Kontrast (SnO:Ni auf Glas bzw. Cr auf Chromstahl) in der BAM hergestellt wurden. Die öffentliche Präsentation des RSE-Prototyps erfolgte auf der ICSE-7 2016 mit der Publikation 2017 in Applied Surface Science.
Aufzählung der wichtigsten wissenschaftlich-technischen und anderer wesentlicher Ergebnisse
• ALD Abscheidungen auf Polymeren (PE, PP, PTFE) unter Atmosphärendruck und im Vakuum mit Ozon als Oxidationsmittel wurden durchgeführt:
- Mit Variation der Schichtdicke
- Mit Variation der Zykluszeit
- Mit und ohne Ozon Vorbehandlung der Oberfläche
• ALD Abscheidungen auf (PE, PP, PTFE) in Vakuum mit O2- und H2-Plasma Vorbehandlung wurden durchgeführt.
- Mit Variation der Schichtdicke
- Mit Variation der Zykluszeit
- Mit und ohne Plasma Vorbehandlung der Oberfläche
• Die ALD Prozesse wurden mit in situ Laserellipsometrie untersucht.
• Die ALD Schichten wurden für die Haftfestigkeit bei der BAM ausgewerte
Additive Manufacturing provides an important enabling technology for the digital transformation of the economy. As an emerging technology it has seen a remarkable development over the last three decades. Nevertheless, it is far from a broad adoption with several barriers to overcome yet. One of the major challenges is the lack of standards. The critical role of standardization for innovation is generally recognized, still the topic too often has been neglected in strategic roadmapping exercises for emerging technologies. Too little is known about the complex dynamics and interrelations of standardization and innovation. The anticipation of standardization needs and the timely and efficient implementation of standards is challenging. This paper aims at contributing to a better understanding of the role that standards play in the multi-dimensional system of innovation. It analyzes the trajectories of innovation in Additive Manufacturing in a systematic and holistic way, focusing on standardization activities with regard to coordination, stakeholders involved, the timing and types of standards developed. Putting standardization in context of the multi-dimensional innovation system of Additive Manufacturing the research shows where standards can support the diffusion of an emerging technology.
Leaking methane (CH4) from infrastructures, such as pipelines and landfills, is critical for the environment but can also pose a safety risk. To enable a fast detection and localization of these kind of leaks, we developed a novel robotic platform for aerial remote gas sensing. Spectroscopic measurement methods for remote sensing of selected gases lend themselves for use on mini-copters, which offer a number of advantages for inspection and surveillance over traditional methods. No direct contact with the target gas is needed and thus the influence of the aerial platform on the measured gas plume can be kept to a minimum. This allows to overcome one of the major issues with gas-sensitive mini-copters. On the other hand, remote gas sensors, most prominently Tunable Diode Laser Absorption Spectroscopy (TDLAS) sensors have been too bulky given the payload and energy restrictions of mini-copters. Here, we present the Unmanned Aerial Vehicle for Remote Gas Sensing (UAV-REGAS), which combines a novel lightweight TDLAS sensor with a 3-axis aerial stabilization gimbal for aiming on a versatile hexacopter. The proposed system can be deployed in scenarios that cannot be addressed by currently available robots and thus constitutes a significant step forward for the field of Mobile Robot Olfaction (MRO). It enables tomographic reconstruction of gas plumes and a localization of gas sources. We also present first results showing its performance under realistic conditions.
Im deutschen Eisenbahnnetz sind ca. 80 Millionen Spannbetonschwellen verbaut. Analog zu anderen Bauwerken werden Wpannbetonschwellen regelmäßig visuell inspiziert. Die Rissbildung ist bei diesen Inspektionen ein Kriterium für die Schädigung einer Spannbetonschwelle. Durch Rissbildung kann es passieren, dass Betonschwellen ihre Nutzungsdauer nicht erreichen.
Isotope amount ratios (hereafter referred to as simply isotope ratios) are proving useful in an ever increasing array of applications that range from studies unravelling transport processes, to pinpointing the provenance of specific samples as well as trace element quantification by using isotope dilution mass spectrometry (IDMS). These expanding applications encompass fields as diverse as archaeology, food chemistry, forensic science, geochemistry, medicine and metrology. However, to be effective tools, the isotope ratio data must be reliable and traceable to enable the comparability of measurement.
The importance of traceability and comparability in isotope ratio analysis has already been recognized by the Inorganic Analysis Working Group (IAWG) within the CCQM. Three pilot studies have focused on the quality of isotope ratio determinations (P48 “U isotope ratios in urine”, P75 “stable isotopes in Methionine”, P105 “87Sr/86Sr in wine”). Moreover, isotope ratio measurements are fundamental to IDMS amount of substance determinations. For example, when Pb quantification using IDMS is undertaken, this requires the measurements of Pb isotope ratios. While the requirements for isotope ratio accuracy and precision in the case of of IDMS are generally quite modest, “absolute” Pb isotope ratio measurements for geochemical age dating and source rock characterization as well as forensic provenance and fingerprinting studies require Pb isotope ratio measurements of the highest quality. To support present and future CMCs on isotope ratio determinations, a Key Comparison was urgently needed. Therefore, it was decided at the IAWG meeting in Paris in April 2011 that a Key Comparison on the determination of Pb isotope ratios in a pure Pb solution and in a bronze sample should be organized and accompanied by a pilot study.
Measuring Pb isotope amount ratios in a pure Pb solution, while seemingly straight forward, rigorously tests the ability of analyst to correct for any instrumental effects (such as mass discrimination and blank correction) on the measured ratios. Pb, present in trace amounts in a metal matrix sample (e.g. Pb in bronze), provides a real world test of the whole chemical and instrumental procedure, from chemical separation and sample purification to analysis and subsequent correction of appropriate instrumental effects on the separated samples.
A suitable bronze material with a Pb mass fraction between 10 and 100 mg·kg-1 was available at BAM. A high purity solution of Pb with a mass fraction of approximately 100 mg·kg-1 was also available. By comparing the Pb isotope ratio results obtained for the bronze sample with the Pb isotope ratio results from the Pb solution, potential biases arising from the processing of the bronze sample could be effectively identified and separated from the instrumental effects arising from the measurement and data processing protocol.
The efficiency of gas sensor application for facilitating the safe use of hydrogen depends considerably on the sensor response to a change in hydrogen concentration. Therefore, the response time has been measured for five different-type commercially available hydrogen sensors. Experiments showed that all these sensors surpass the ISO 26142 standard; for the response times t90 values of 2 s to 16 s were estimated. Results can be fitted with an exponential or sigmoidal function. It can be demonstrated that the results on transient behaviour depend on both the operating parameters of sensors and Investigation methods, as well as on the experimental conditions: gas change rate and concentration jump.
Präsentation der Ergebnisse eines Ringversuchs zur Kompetenzbewertung von Prüflaboratorien auf dem Gebiet der anorganischen und organischen Bodenanalytik: Polyzyklische aromatische Kohlenwasserstoffe (PAK) in Boden, Mineralölkohlenwasserstoffe (MKW) in Boden, Elemente in Sediment und Gesamtcyanid in Boden.
Bacterial biofilms represent a ubiquitous form of microbial life on Earth. Due to an evolved armory of protean biological responses to external stimuli, bacteria are able to adhere to, colonize and thrive on virtually all surfaces, whether natural or synthetic, even in challenging environmental conditions. In addition to significant health risks, biofilms are among the salient contributors to the deterioration of metals and their alloys, thereby causing safety risks for technical equipment. Hence, understanding the interaction mechanisms of electroactive sessile bacteria with metal surfaces is vital for facilitating the development of efficient control strategies and novel anti-fouling surfaces in various industries and technologies.
The present study focusses on a combined spectroelectrochemical approach, melding methods of surface enhanced Raman spectroscopy (SERS) and electrochemical techniques, to investigate the chemical characteristics and redox activities of electroactive bacteria during the initial stages of biofilm formation. Gold has been selected as a model substrate due to its inert character, considerably high surface enhancement factor, as well as its capability to allow surface chemistry modifications and substrate polarization in order to precisely control the surface charge. Square wave voltammetry (SWV) and cyclic voltammetry (CV) studies have been performed for quantitative determination of flavin concentration and electrochemical impedance spectroscopy (EIS) has been utilized to study the changes in electrochemical processes within biofilms during different stages of growth. Shewanella sp. have been chosen as microorganisms within this work due to their versatile exoelectrogenic respiratory behavior and their distinct ability to reduce metals via extracellular electron transfer mechanisms involving self-secreted electron shuttle redox molecules such as flavins. To further explicate the process of diffusion of flavins within biofilms, a model system has been developed to simulate the structural features of the bacterial extracellular polymeric substances typically found in biofilms. This has been achieved by creating hydrogel films comprised of calcium-cross-linked alginate. The results demonstrate an interplay of factors contributing to the initial phases of bacterial settlement and biofilm formation as a function of environmental parameters. Furthermore, the results allow insight into the diffusion of flavins, much like they would in a natural biofilm, and how their redox behavior affects the biofilm development.
Capillary electrophoresis (CE) is an analytical technique that
separates analytes based on their electrophoretic mobility with
the use of an applied voltage.
Nanoparticles separation using CE exhibits good separation and
analysis efficiency, especially for nanoparticles smaller than 30
nm. The coupling of CE with inductively coupled plasma mass
spectrometry (ICP-MS) provides the possibility to detect
nanoparticles in the concentration range of nanograms per litre
and enables the simultaneous detection of nanoparticles and its
[1][2] ionic counter parts.
Our objective is to develop a fast and reliable separation method
for differently modified nanoparticles using capillary
electrophoresis.
The performance of a miniaturized channel for the separation of polymer and metal nanoparticles (NP) using Asymmetrical Flow Field-Flow Fractionation (AF4) was investigated and compared with a conventional AF4 system. To develop standard separation methods, experimental parameters like cross flow, gradient profile and injection time were varied and optimized.
Corresponding chromatographic parameters were calculated and compared. Our results indicate that the chromatographic resolution in the miniaturized channel is lower, whereas significantly shorter analyses time and less solvent consumption were obtained. Moreover, the limit of detection (LOD) and limit of quantification (LOQ) obtained from hyphenation with a UV-detector are obviously lower than in a conventional channel, which makes the miniaturized channel interesting for trace analysis.
A common method for nanoparticle separation, which was introduced in 1976 by Giddings, represents asymmetrical field-flow fractionation (AF4). It is a flow based separation method, which can be theoretically used to separate particles range from 1 nm to 50 µm. However, when the particles are smaller than 10 nm, separation with AF4 will become difficult to perform. Because in this case strong separation force, which induces aggregation of particles, should be applied. This will decrease recoveries of analytes and limit its application in accurate quantitative analysis. Capillary electrophoresis (CE) is another well-developed separation technique, in which samples will be separated in relation to their electrophoretic mobility. In recent years, CE has been used to separate different kinds of nanoparticles like, gold colloids or CdSe Quantum dots. However, till now only separation of particles smaller than 50 nm was reported. Because large size distribution of bigger particles will result in strong peak broadening and long separation time.
A two-dimensional coupling of AF4 and CE might provide us a new separation method, which can extend the separation ranges of both methods and be a way to characterise particles with large size distributions.
Le monde de la Génizah du Caire et plus particulièrement la collection de Cambridge (CUL) a recu l’attention des chercheurs depuis le XIXe siècle mais peu de recherches ont été faites à ce jour sur l’aspect matériel des manuscrits. Pourtant l’archéométrie est un outil précieux pour mieux comprendre les sociétés qui ont créés ces documents.
Inhibition of Herpes Virus by Specific and Non-specific Interactions With Graphene Conjugates
(2017)
Herpes viruses (HSV) are global, host-adapted pathogens that cause a widespread diversity of diseases. The frequency of HSV infections all over the world has amplified over the last years, making it a major concern in the area of public health. Therefore, synthesis of systems that can inhibit development of these viruses is required. Various compounds already have shown inhibition of HSV, but concentration of these inhibitors is relatively high and resistance against those drugs is challenging.
Combination of biological knowledge, about structure of the active site on the surface of HSV that is responsible for inhibition of the pathogen, with the chemistry of graphene results in 2D systems with the ability of specific and nonspecific interactions with HSV. In this work, 2D nanomaterials with picomolar IC50 against HSV are synthesized by conjugation of peptides to the surface of graphene.
2D nanomaterials are characterized by various methods, including XPS, AFM and IR. Biological evaluation showed high potency of synthesized nanomaterials to inhibit HSV and therefore underlined possibility to use such materials in future biomedical applications.
Graphene and its derivatives have recently attracted much attention for sensing and deactivating pathogens. However, mechanism of multivalent interactions at the graphene-pathogen interface are not fully understood. Since different physicochemical parameters of graphene play a role at this interface, control over graphene’s structure is necessary to study the mechanism of these interactions. In this work, zwitterionic graphene nanomaterials (ZGNMs) were synthesized with defined isoelectric points and exposure, in terms of polymer coverage and functionality. Then, the switchable interactions of ZGNMs with E. coli were investigated to study the validity of the generally proposed “trapping” mechanism for inactivating pathogens by functionalized graphene derivatives. The ZGNMs were able to controllably trap and release E. coli by crossing their isoelectric points.
Metal organic frameworks and coordination polymers play an important role in different fields of applications. Moreover, particularly fluorinated metal-organic frameworks (FMOFs) are in the focus of interest during the last years. In most cases, fluorine is implemented using perfluorinated organic linkers at the synthesis, usually performed by solvothermal synthesis. However, only few examples are known so far where fluorine is coordinated directly to the metal cation. Recently, we reported about mechanochemical syntheses and characterization of fluorine-containing coordination polymers of alkaline earth metals by milling M(OH) (M: Ca, Sr, Ba) with fluorinated benzene dicarboxylic acids 2 and we reported about mechanochemical syntheses of alkaline earth metal fluorides with ammonium fluoride. Now we are reporting about a combination of both synthesis routes. That is the first mechanochemical synthesis of coordination polymers where fluorine is coordinated directly to the metal cation.
A plethora of innovative materials are produced by depositing thin and ultrathin coatings on different substrates. For instance, hard disks able to store terabytes of information are based on multiple magnetic and non-magnetic nano-layers. Moreover, protectives coatings might be used to enhance the mechanical properties of substrate materials; for instance Zn-based coatings are used in the Al industry.
In this context, solid analytical techniques are required to provide fast multi-elemental chemical analyses with high depth resolution (to monitor the different layers) and high sensitivity (to detect major, minor and trace elements). Direct solid analytical techniques, including Secondary Ion Mass Spectrometry, Secondary Neutral Mass Spectrometry, Auger Electron Spectroscopy or X-Ray Photoelectron Spectroscopy provide very valuable information about the atomic chemical composition of the surfaces/coatings; however, they also have some major drawbacks, such as high operating costs, complex sample pre-treatment and handling, low sample throughput and/or severe matrix effects that result in difficult quantification procedures. In order to overcome some of these drawbacks Glow Discharge Mass Spectroscopy (GD-MS) is proposed as a complementary methodology that provides an ideal solution for fast and accurate bulk and layer analyses. In this work, we evaluate the advantages and limitations of this technique and we discuss about recent progresses and new applications.
Innovative material with outstanding physical and chemical properties are produced upon the deposition of thin and ultrathin coatings on different substrates. For instance, hard disks able to store Tera-bytes of information are based on the deposition of multiple nano-layers, which include magnetic and non-magnetic layers. Many other analogous examples, including photovoltaic cells, coated Al substrates, oxidized thin film composite membranes, coated glasses, coated polymers, etc. could be cited. The physical performance of these emerging materials is directly related to their chemical properties, including the elemental distribution within the different layers and at the layer-interfaces, or the presence of critical non-desired trace elements. Therefore, quality control and R+D advances require the development of direct solid analytical techniques able to provide fast multi-elemental chemical analysis of these materials, with high depth resolution (to monitor the different layers) and high sensitivity (to detect major, minor and trace elements).
Atomic spectrometry techniques have long been used for direct elemental chemical characterization. Techniques, such as Secondary Ion Mass Spectrometry or Auger Electron Spectroscopy provide very valuable information about the chemical composition of the surfaces/coatings; however, they also have some major drawbacks, such as high operating costs, complex sample pre-treatment and handling, low sample throughput and/or severe matrix effects that result in difficult quantification procedures. To overcome some of these drawbacks Glow Discharge Mass Spectroscopy is proposed as a complementary methodology that provides an ideal solution for fast and accurate bulk and layer analyses. In this work, we evaluate the advantages and limitations of this technique and we discuss about recent progresses and new applications.
Die Einwerbung von Drittmitteln wird immer mehr zur zwingenden Notwendigkeit, wenn man Forschung betreiben möchte. Drittmittel sorgen nicht dafür, dass man zusätzliches Geld für die Forschung ausgeben kann, wie das früher einmal der Fall war, sie werden mehr und mehr zur Grundbedingung für Forschung überhaupt. Zu den Drittmitteln zählen insbesondere Projektmittel der Forschungsförderung des Bundes, der Länder, der EU und anderer öffentlicher Stellen, der Wirtschaft zur Durchführung von Forschungsaufträgen sowie der Deutschen Forschungsgemeinschaft. Sie machen bereits einen entscheidenden Teil des Budgets von Universitäten (25-30%, Tendenz steigend) und Forschungseinrichtungen aus. In den Präsidien und Rektoraten werden Stabsstellen eingerichtet, um mögliche Fördertöpfe zu finden und erfolgreiches Formulieren von Anträgen zu unterstützen und die Formalien der Antragstellung zu optimieren. Je mehr Drittmittel eine Einheit einwirbt, mit umso mehr Grundmitteln darf sie rechnen. Dem hohen Zeitaufwand der Wissenschaftler für das Schreiben von Anträgen stehen jedoch immer niedrigere Bewilligungsquoten gegenüber. Sehr umfangreiche Projekte mit sehr vielen Partnern scheinen immer schwieriger zu begründen zu sein. Lange Bearbeitungszeiten bis zur Bewilligung von Projekten und Laufzeiten von 4 Jahren stehen im Widerspruch zu den Planungszeiträumen für Forschungsprojekte im Industrielabor. Im Zeichen immer stärker geforderter Interdisziplinarität müssen andere Wege gefunden werden, um die Stärken einer Messtechnik überzeugend einzubringen.
Was ist zu tun? In diesem Diskussionsbeitrag werden Informationen zusammengetragen, um Fördermöglichkeiten der Grundlagenforschung und Applikationen von GD-techniken auszuloten und die Kooperation von Forschungseinrichtungen und Industriepartnern praktikabel zu realisieren.
Analysis of writing materials in Genizah fragments written during the first half of the XIth century
(2017)
My doctoral dissertation in progress focuses on ink composition on some fragments found in the Cairo Genizah and written by the leaders of the Jewish communities in Fustat during the first half of the XIth century. This is a project at the intersection of historical (Hebrew paleography) and scientific (physics, chemistry and materials science) disciplines. Indeed, I’m analyzing the corpus I constituted (written by Ephraim ben Shemarya and Yephet ben David from the Palestinian congregation and Elhanan ben Shemarya, Abraham ben Sahlan and Sahlan ben Abraham from the Babylonian community). The interests of such a study are numerous: provide insights on trade, local technologies, and social structures. If sufficient data is collected, the tabulated results have the potential for use as an indirect geochronological marker, in particular in the case of iron-gall ink. The composition of the vitriol used for the iron-gall ink preparation depends on the place of extraction. While attributing the vitriol used to a specific source of extraction is seldom possible, a number of origins can be excluded thanks to such analysis. Though ink composition alone cannot be used as a direct geochronological marker, superposition of chemical, palaeographical, codicological, and textual data would help to date and localize and serve as an additional argument for a typology and dating of other Hebrew scripts.
The Cairo Geniza is an “archive” discovered in the 19th century in Ben Ezra Synagogue in Fustat, a district in Old Cairo (Egypt), located south of the center of modern Cairo. The giant collection of mostly Jewish documents that vary in genres, languages and writing supports contains a large number of early medieval Hebrew manuscripts, mostly in fragmentary form. The larger part of the Cairo Geniza is stored today in the Cambridge University Library.
The Geniza provides sources for the literary, linguistic, historical studies of the various aspects Jewish life. As the documents attest, at least two Jewish communities co-existed in Fustat up to 11th century: a so-called Babylonian and Palestinian. These communities had different leaders, different traditions and lived independently. The differences seem to manifest themselves also in the paleographical, codicological and some material properties of the manuscripts produced by each community.
My work addresses the ink composition in the documents attributed to the members of these communities. For the determination of the inks type and composition I employ reflectography and µ-XRF spectrometry, respectively. The preliminary typological studies indicate that iron-gall inks were found predominantly in the manuscripts attributed to the Palestinian community.
Additive Manufacturing provides an important enabling technology for the digital transformation of the economy. As an emerging technology it has seen a remarkable development over the last three decades. Nevertheless, it is far from a broad adoption with several barriers to overcome yet. One of the major challenges is the lack of standards. The critical role of standardization for innovation is generally recognized, still the topic too often has been neglected in strategic roadmapping exercises for emerging technologies. Too little is known about the complex dynamics and interrelations of standardization and innovation. The anticipation of standardization needs and the timely and efficient implementation of standards is challenging. This paper aims at contributing to a better understanding of the role that standards play in the multi-dimensional system of innovation. It analyzes the trajectories of innovation in Additive Manufacturing in a systematic and holistic way, focusing on standardization activities with regard to coordination, stakeholders involved, the timing and types of standards developed. Putting standardization in context of the multi-dimensional innovation system of Additive Manufacturing the research shows where standards can support the diffusion of an emerging technology.
Additive Manufacturing provides an important enabling technology for the digital transformation of the economy. As an emerging technology it has seen a remarkable development over the last three decades. Nevertheless, it is far from a broad adoption with several barriers to overcome yet. One of the major challenges is the lack of standards. The critical role of standardization for innovation is generally recognized, still the topic too often has been neglected in strategic roadmapping exercises for emerging technologies. Too little is known about the complex dynamics and interrelations of standardization and innovation. The anticipation of standardization needs and the timely and efficient implementation of standards is challenging. This paper aims at contributing to a better understanding of the role that standards play in the multi-dimensional system of innovation. It analyzes the trajectories of innovation in Additive Manufacturing in a systematic and holistic way, focusing on standardization activities with regard to coordination, stakeholders involved, the timing and types of standards developed. Putting standardization in context of the multi-dimensional innovation system of Additive Manufacturing the research shows where standards can support the diffusion of an emerging technology.
Under the Comité Consultatif pour la Quantité de Matière (CCQM), a key comparison, CCQM-K104, was coordinated by the National Institute of Metrology (NIM). The comparison was designed to demonstrate a laboratory's performance in determining the mass fraction of the main component in a complex high purity organic material. Nine NMIs or DIs participated in the comparison. Eight participants reported their results. An additional impurity was resolved from the avermectin B1a peak and was tentatively identified as an unknown impurity by NMIA (National Measurement Institute (Australia)). It was subsequently identified by NIM as a diastereoisomer of avermectin B1a at the C-26 position. Final reference value (KCRV) = 924.63 mg/g, with uncertainty (k=1) = 3.89 mg/g, and expanded uncertainty = 8.97 mg/g. The degrees of equivalence with the avermectin B1a KCRV for each participant were reported. The measurement results and degrees of equivalence should be indicative of the performance of a laboratory's measurement capability for the purity assignment of organic compounds of high structural complexity (relative molecular mass range of 500 Da -1000 Da and low polarity (-log KOW ≤ -2).
This project aims to develop capacity to produce certified reference materials (CRMs) for environmental analysis by transferring know-how between the partners and combining their skills to focus on environmental CRM production. The production process includes good manufacturing practices for processing materials, method development, the validation and application of homogeneity, stability and characterisation tests, the calculation of individual uncertainties (between-unit inhomogeneity, long term stability, characterisation) and combination of uncertainties to determine overall uncertainty of the matrix reference materials. An inter laboratory comparison registered as a EURAMET project is set as the ultimate project outcome, confirming the partners’ capabilities in applying newly acquired skills.
Accurate measurements of stable isotope abundance ratio variations are often reported using artifact based delta-scales, which rely on suitable isotopic reference materials (iRM) for their realization. For example, variations in the 26Mg/24Mg isotope abundance ratio in natural systems are typically reported as delta26Mg values that represents the relative difference between the 26Mg/24Mg ratio measured in a sample relative to its measurement preferably in an iRM. In the past, such delta26Mg measurements were referenced to NIST SRM 980, the initial zero of the delta26Mg scale. With the development of MC-ICPMS, the detection of small but measurable isotopic differences in different chips of SRM 980 became apparent. It was then replaced by a Mg solution (DSM3), the new zero of the delta26Mg scale. A potential replacement iRM for DSM3 has been developed, ERM-AE143. This iRM has also been measured for its absolute isotope amount ratios1,2 making it traceable to the SI.
The results of an delta26Mg intercomparison experiment include the Mg iRMs SRM 980, IRMM-009, ERM-AE143, AE144, AE145 standards DSM3 and Cambridge-1. The intercomparison involved 5 expert laboratories, consisting of 3 national metrological institutes (BAM, NIST, PTB) and 2 scientific research laboratories (GFZ Potsdam, UBremen).
The iRMs were measured relative to AE143 and cover a range of ≈5 ‰ in delta26Mg. IRMM-009 has the lowest delta26Mg value while DSM3 has the highest, spanning a range in values that covers natural Mg isotope variations. The 2SD reproducibilities of the individual values from the different laboratories range from 0.02 to 0.26 ‰. The mean delta26Mg values, calculated from the laboratory means however show 2SD reproducibilities varing between 0.025 and 0.093 ‰. Propagated measurement uncertainties suggest a standard uncertainty of about 0.1‰ for delta26Mg determinations.
Hepcidin-25 has attracted much attention ever since its discovery in 2001. It is widely recognized that this liver produced peptide hormone plays a major role in the regulation of iron levels in mammals and can reveal important clinical information about several pathological states in patients suffering from iron-related disorders.
With the aim to tackle the current difficulties in hepcidin quantification and improve the status of this promising biomarker in the clinical field, we developed a rapid and robust analytical strategy for the quantification of hepcidin-25 in human samples based on HPLC-MS/MS (QqQ) to be implemented in routine laboratories. The novelty of the method is the use of special HPLC vials to avoid adsorptive losses due to the basic character of the peptide that causes interaction with the silanol groups of the vial’s glass surface. Up to 90% decrease in the MS/MS signal was observed, when commercial HPLC vials were used, while vials treated with 3-(2-aminoethylamino)propylmethyl-dimethoxysilane or 1H,1H,2H,2H-perfluorooctyltriethoxysilane, leading to no significant losses in the dynamic range of physiological hepcidin-25 mean serum levels (10-20 µg/L).
Careful analytical validation was performed for determining the reproducibility, repeatability, limit of quantification (0.5 µg/L) and linearity (0.5-40 µg/L) of the method. Serum samples from 9 healthy volunteers were analyzed with a median hepcidin-25 level of 3.3 µg/L, comparable to results reported in the literature.
We developed a rapid and robust HPLC-MS/MS (QqQ) method for the quantification of hepcidin-25, a promising new biomarker in iron metabolism, in human samples. The novelty of the method is the use of special HPLC vials to avoid adsorptive losses due to the basic character of the peptide that causes interaction with the silanol groups of the vial’s glass surface. Up to 90% decrease in the MS/MS signal was observed, when commercial HPLC vials were used, while vials treated with 3-(2-aminoethylamino)propylmethyldimethoxysilane or 1H,1H,2H,2H-perfluorooctyltriethoxysilane, leading to no losses in the range of physiological hepcidin-25 mean serum levels (10-20 µg/L).
Artificial intelligence (AI), machine learning, and neural networks have revolutionized fields such as self-driving cars or machine translation. Indeed, AI has progressed so far that scientists such as Stephen Hawking now fear that it may destroy humankind altogether. So, let’s get started and use AI in surface science.
Here we train neural networks to use raw measurement data as input and immediately return the desired output parameters. We discuss the example of X-ray reflectivity measurements of ultrathin films, which contain reciprocal space information and must traditionally be fitted with dynamic scattering theory. Instead, we train the neural network with simulated X-ray data of multilayer structures and then apply it to measurement data. The neural network yields high accuracy results, is robust against noise, and performs significantly faster than fitting algorithms in real-time experiments. The presented neural network data analysis is becoming increasingly attractive, because free software has become very accessible and specialized computer chips (NPU) are currently being rolled out.
The presented development of a damping model is a research component of an experimental feasibility study about moisture in building materials measured with Bluetooth® Low Energy (BLE) signals. This study may be part of a structural health monitoring aiming on early damage detection in the built infrastructure and is increasingly focusing on wireless sensor Network technology. It is investigated, how the Received Signal Strength Indicator (RSSI) of a BLE signal, transmitted from the BLE-module embedded in building materials with changing moisture content is damped. The BLE-module communicates with a mobile Smart Device as tablet or mobile phone via 2.45 GHz-ISMfrequency band where water dipoles start to oscillate. If the BLE-signal transfers through a moist material, the moisture Content influences the RSS-Indicator. The damping model demonstrates this damping effect on RSSI by the abstraction of the reality observed in a real system.
The 7th International Conference on Spectroscopic Ellipsometry (ICSE-7) was held in Berlin in June 2016, jointly organised by ICSE and BAM. The publication of the proceedings special issue in Applied Surface Science follows this event. In the special issue, about 100 articles on current topics of optics and surface science related to ellipsometry, polarimetry, and similar techniques are presented, underpinning the high significance of these techniques for many fields of materials science.
Due to the demand of monitoring the water quality regarding emerging pollutants, such as drug residues, selective, high-throughput and multi-target analytical methods must be established. On the one hand, the influence of sewage on natural surface waters must be routinely monitored. On the other hand, estimation of removal efficiencies of pollutants, such as drug residues, is in the focus of industrial and public wastewater treatment. Immunoassays, such as ELISA, offer the possibility to be highly sensitive and selective due to the high target affine and specific recognition of antibodies to target molecules. Batch-wise processing in microtiter plates allow the necessary high-throughput, but only a single analyte can be determined within one measurement.
To overcome these disadvantages, we developed a four-plex micro-bead based flow cytometric assay, which is adaptable for the microtiter plate format. The modular and self-prepared bead support consists of polystyrene-core-silica-shell particles. While the polystyrene core is used for encoding, by introducing different amounts of fluorescent dyes, the silica-shell creates a solid-support for the immunoassay: The target analytes, three drugs, carbamazepine, diclofenac and caffeine and the f ecal marker isolithocholic acid are covalently coupled to amino-groups on the surface via NHS-chemistry. A competitive immunoassay is subsequently conducted in a simple mix-and-read procedure. Finally, we could use SAFIA to assess the influent of treated and untreated waste water on the Douro river estuary in Portugal. The results of the analysis are comparable to ELISA. However, measurements could be carried out in 25% the time of analysis.
Die zerstörungsfreie Prüfung von austenitischen Mischnähten, wie sie beispielsweise im Primärkreislauf von Kernkraftwerken vorkommen, stellt besondere Anforderungen an die eingesetzte Ultraschallprüfung. Voraussetzung für die positions- und größenrichtige Darstellung von Bauteilfehlern, insbesondere bei bildgebenden Ultraschallverfahren, ist die genaue Kenntnis der Materialparameter auf dem gesamten Schalllaufweg vom Sender zum Empfänger. Im Rahmen eines Forschungsprojekts entwickeln wir ein zerstörungsfreies, inverses Verfahren, das die Schweißnahtparameter entsprechend des Ogilvy-Modells aus der Schallschnelleverteilung bestimmt, die eine Longitudinalwelle an der Oberfläche erzeugt, nachdem sie durch die Schweißnaht gelaufen ist.
Mechanaochemistry is an effective method to yield pure compounds within a short reaction time. Mechanochemical C-C bond forming reactions gained increasing interest in the past decade. Among those the Knoevenagel condensation is an important reaction for synthezing a,b-unsaturated compounds. The information on the underlying mechanisms of mechanochemical reactions are scarce. In situ investigations using Raman spectroscopy and synchroton XRD either alone or in combination address this challenge. We present the in situ results of a Knoevenagel condensation with p-nitrobenzaldehyde and malononitrile under neat grinding conditions.
Mechanaochemistry is an effective method to yield pure compounds within a short reaction time. Mechanochemical C-C bond forming reactions gained increasing interest in the past decade. Among those the Knoevenagel condensation is an important reaction for synthezing a,b-unsaturated compounds. The information on the underlying mechanisms of
mechanochemical reactions are scarce. In situ investigations using Raman spectroscopy and synchroton XRD either alone or in combination address this challenge. We present the in situ results of a Knoevenagel condensation with p-nitrobenzaldehyde and malononitrile under neat grinding conditions.
Mechanaochemistry is an effective method to yield pure compounds within a short reaction time. Mechanochemical C-C bond forming reactions gained increasing interest in the past decade. Among those the Knoevenagel condensation is an important reaction for synthezing a,b-unsaturated compounds. The information on the underlying mechanisms of mechanochemical reactions are scarce. In situ investigations using Raman spectroscopy and synchroton XRD either alone or in combination address this challenge. We present the in situ results of a Knoevenagel condensation with p-nitrobenzaldehyde and malononitrile under neat grinding conditions.
Research and Development in Non-Destructive Testing in Civil Engineering at BAM has de-veloped over more than two decades. Highlights of present research are ultrasound phase array probes, ground penetrating radar applications for the assessment of existing structures and Laser Induced Breakdown Spec-troscopy (LIBS) to determine which chemical elements on the surface of a specimen are. RFID sensor devel-opments for wireless moisture monitoring and data fusion for the combined analysis of sensor data are fast developing areas. In addition, a selection of application cases is briefly described.
Half-cell potential mapping (HP) is the most popular nondestructive test (NDT)-method for the localization of corrosion damage in concrete. It is generally recognized, that HP is prone to the environmental factors that arise from salt induced deterioration, such as varying moisture and chloride gradients. Additional NDT-methods are capable to determine distinctive areas, but cannot yet be used to estimate more accurate testing results. We introduce a supervised machine learning (SML) based approach for data fusion to make use of the additional sensor information. SML are methods that explore relations between different (sensor) data from predefined data labels. We use a simple linear classifier named logistic regression to distinguish defect and intact areas. The test performance improves drastically compared to the best single method, HP. In order to generate representative, labeled data we conducted a comprehensive experiment that simulates the deterioration-cycle of a chloride-exposed building part in the lab. Our data set consist of 18 measurement campaigns, each containing HP-, ground-penetrating-radar-, microwave-moisture-, and Wenner-resistivity-data. We detail the challenges that arise with a data driven approach in NDT and how we addressed them.
This talk demonstrates the results of the IGSTC-project entitled "NDT-Data Fusion".
Project approach:
Nondestructive testing (NDT) of concrete buildings allows to coordinate efficient repair measures. Multi-sensor platforms collect large data sets. Nevertheless, data analysis is typically performed manually. Data Fusion uses the full potential of a multi-sensory data set in order to:
improve information quality (reliability, robustness, accuracy, clarity, completeness) and enables automated algorithm based data analysis.
We present the project achievements, namely:
- Development of building scanner system for multisensory NDT
- Laboratory multi sensor investigations
- Development of data fusion concept for honeycombing and pitting corrosion
- Field testing
Quantum dot (QD) based nanomaterials are very promising materials for the fabrication of optoelectronic devices like solar cells, light emitting diodes (LEDs), and photodetectors as well as as reporters for chemo- and biosensing and bioimaging. Many of These applications involve the monitoring of changes in photoluminescence intensity and energy transfer processes which can strongly depend on excitation wavelength or energy. In this work, we analyzed the excitation energy dependence (EED) of the photoluminescence quantum yields (PL QYs) and decay kinetics and the circular dichroism (CD) spectra of CdSe/CdS core/shell QDs with different thicknesses of the surface passivation shell. Our results demonstrate a strong correlation between the spectral position of local maxima observed in the EED of PL QY and the zero-crossing points of the CD profiles. Theoretical analysis of the energy band structure of the QDs with effective mass approximation suggests that these structures could correspond to exciton energy levels. This underlines the potential of CD spectroscopy for the study of electronic energy structure of chiroptically active nanocrystals which reveal quantum confinement effects.
The implementation of fluorescent methods is of outstanding importance in the field of optical chemical sensor Technology and biosciences. Their bioanalytical applications are manifold including fluorescence microscopy, fluorescence in situ hybridization, DNA sequencing, fluorescence-activated cell sorting, immunoassays, analysis of DNA and Protein microarrays, and quantitative PCR, just to name a few examples. Particularly, fluorescence microscopy is a valuable method in the versatile field of biomedical imaging methods which nowadays utilizes different fluorescence Parameters like emission wavelength/Color and lifetime for the discrimination between different targets. Sectional Images are available with confocal microscopes. Tissue, cells or single cellular compartments can be stained and visualized with fluorescent dyes and biomolecules can be selectively labeled with fluorescent dyes to Monitor biomolecular interactions inside cells or at Membrane bound receptors.
On the other hand , fluorophores can act as indicator (or "molecular probe") to visualize intrinsically colorless and non-fluorescent ionic and neutral analytes such as pH, Oxygen (pO2), metal ions, anions, hydrogen peroxide or bioactive small organic molecules such as Sugars or nucleotides. Thereby, their photoluminescent properties (fluorescence or phoporescence intensity, exitation and/or Emission wavelength, emission lifetime or anisotropy) respond to the presence of these species in their immediate Environment. In general, the use of luminescent probes has the advantage that they can be delivered directly into the sample, and detected in a contactless remote mode. By now, these probes are often encapsulated in different types of nanoparticles (NPs) made from (biodegradable) organic polymers, biopolymers or inorganic materials like silica or bound to their surface.
Despite their immense and rapidly increasing
importance as analytical tools or therapeutic drugs, the detailed
structural features of particular monoclonal antibodies are
widely unknown. Here, an antibody already in use for diagnostic
purposes and for molecular dosimetry studies in cancer therapy
with very high affinity and specificity for cisplatin-induced DNA
modifications was studied extensively. The molecular structure
and modifications as well as the antigen specificity were
investigated mainly by mass spectrometry. Using nano electrospray
ionization mass spectrometry, it was possible to characterize the antibody in its native state. Tandem-MS experiments not
only revealed specific fragments but also gave information on the molecular structure. The detailed primary structure was further
elucidated by proteolytic treatment with a selection of enzymes and high resolution tandem-MS. The data were validated by
comparison with known antibody sequences. Then, the complex glycan structures bound to the antibody were characterized in
all detail. The Fc-bound oligosaccharides were released enzymatically and studied by matrix-assisted laser desorption/ionization
mass spectrometry. Overall 16 different major glycan structures were identified. The binding specificity of the antibody was
investigated by applying synthetic single and double stranded DNA oligomers harboring distinct Pt adducts. The antibody−
antigen complexes were analyzed by mass spectrometry under native conditions. The stability of the complex with double
stranded DNA was also investigated.
The EC recommendation for the definition of nanomaterial [2011/696/EU] requires the quantitative size determination of constituent particles in samples down to 1 nm. Accordingly, a material is a nanomaterial if 50 % or more of the particles are in the size range 1-100 nm. The fact that engineered nanomaterials already exist in many industrial and consumer products challenges the development of measurement methods to reliably identify, characterize and quantify their occurrence as substance and in various matrices.
The EU FP7 NanoDefine project [www.nanodefine.eu] has addressed this challenge by developing a robust, readily implementable and cost-effective measurement strategy to obtain quantitative particle size distributions and to distinguish between nano and non-nano materials according to the EU definition. Based on a comprehensive evaluation of existing methodologies and intra- and inter-lab comparisons, validated measurement methods and instrument calibration procedures have been established to reliably measure the size of particles within 1-100 nm, and beyond, including different shapes, coatings and chemical compositions in industrial materials and consumer products. Case studies prove their applicability for various sectors, including food, pigments and cosmetics.
Main outcome is the establishment of an integrated tiered approach including rapid screening (tier 1) and confirmatory methods (tier 2), and a user manual to guide end-users, such as manufacturers, in selecting appropriate methods. Another main product is the “NanoDefiner” e-Tool allowing the standardised / semi-automated selection of appropriate methods for material classification according to the EU definition. Results also contribute to standardization efforts, such as CEN TC 352 or ISO TC 229.
Accurate measurements of stable isotope abundance ratio variations are often reported using artifact based delta-scales, which rely on suitable isotopic reference materials (iRM) for their realization. For example, variations in the 26Mg/24Mg isotope abundance ratio in natural systems are typically reported as delta26Mg values that represents the relative difference between the 26Mg/24Mg ratio measured in a sample relative to its measurement preferably in an iRM. In the past, such delta26Mg measurements were referenced to NIST SRM 980, the initial zero of the delta26Mg scale. With the development of MC-ICPMS, the detection of small but measurable isotopic differences in different chips of SRM 980 became apparent. It was then replaced by a Mg solution (DSM3), the new zero of the delta26Mg scale. A potential replacement iRM for DSM3 has been developed, ERM-AE143. This iRM has also been measured for its absolute isotope amount ratios1,2 making it traceable to the SI.
The results of an delta26Mg intercomparison experiment include the Mg iRMs SRM 980, IRMM-009, ERM-AE143, AE144, AE145 standards DSM3 and Cambridge-1. The intercomparison involved 5 expert laboratories, consisting of 3 national metrological institutes (BAM, NIST, PTB) and 2 scientific research laboratories (GFZ Potsdam, UBremen).
The iRMs were measured relative to AE143 and cover a range of ≈5 ‰ in delta26Mg. IRMM-009 has the lowest delta26Mg value while DSM3 has the highest, spanning a range in values that covers natural Mg isotope variations. The 2SD reproducibilities of the individual values from the different laboratories range from 0.02 to 0.26 ‰. The mean delta26Mg values, calculated from the laboratory means however show 2SD reproducibilities varing between 0.025 and 0.093 ‰. Propagated measurement uncertainties suggest a standard uncertainty of about 0.1‰ for delta26Mg determinations.
1 JAAS, 2015, 31,179; 2JAAS, 2016, 31, 1440
Micelles are of increasing importance as versatile carriers for hydrophobic substances and nanoprobes for a wide range of pharmaceutical, diagnostic, medical, and therapeutic applications. A key Parameter indicating the Formation and stability of micelles is the critical micelle concentration (CMC). In this respect, we determined the CMC of common anionic, cationic, and non-ionic surfactants fluorometrically using different fluorescent probes and fluorescence Parameters for Signal detection and ompared the results with conductometric and surface Tension measurements. Based upon These results, requirements, Advantages, and pitfalls of each methods are discussed. Our study underlines the versatility of fluorometric methods that do not impose specific requirements on surfactants and are especially suited for the quantification of very low CMC values. Conductivity and surface Tension measurements yield smaller uncertainties particularly for high CMC values, yet are more time- and substance consuming and not suitable for every surfactant.
Lanthanide-doped upconversion nanoparticles (UCNPs) are of great interest for biomedical applications. Currently, the applicability of UCNP bionanotechnology is hampered by the generally low luminescence intensity of UCNPs and inefficient energy Transfer from UCNPs to surface-bound chromophores used e.g. for photodynamic therapy or analyte sensing. In this work, we address the low-Efficiency issue by developing versatile core-Shell nanostructures, where high-concentration sensitizers and activators are confined in the core and Shell Region of representative hexagonal NaYF2:Yb,Er UCNPs. After Doping concentration optimization, the sensitizer-rich core is able to harvest/accumulate more excitation energy and generate almost one order of Magnitude higher luminescence intesity than conventional homogeneously doped nanostructures. At the same time, the activator Ions located in the Shell enable a ~6 times more efficient resonant energy Transfer from UCNPs to surface-bound acceptor dye molecules due to the short distance between donor-acceptor pairs. Our work provides new insights into the rational design of UCNPs and will greatly encrease the General applicability of upconversion nanotechnologies.
Scanning Electron Microscopy (SEM) or Transmission Electron Microscopy (TEM) ? This is a question, nowadays discussed in EM labs of research and industry involved in the characterization and metrology of nanoparticles. The Scanning principle is adapted to TEM, the Transmission mode is adapted to Ultra High Resolution SEM. Can modern SEM replace TEM, reach atomic resolution even without Cs corrector or nm lateral resolution for energydispersive X-ray spectroscopy (EDX)?
Due to the development of a New Cold Field Emission (NCFE) electron source Hitachi SEMs SU9000 and SU8200 can deliver routinely sub-nm image resolution and EDX mappings at very high count rates and a lateral EDX resolution of a few nm. A TiO2 sample provided by BAM was analysed at 30kV using low kV STEM – simultaneously with the Through-the-lens (TTL) SE detector, the Bright Field transmitted and Dark Field transmitted signals. By this method a pixel precise information of the particles surface using SE, its chemical nature using DF-STEM and its crystalline structure using Bright Field signal is given in one 40sec scan. The advantage of this observation mode compared to Ultra Low Voltage imaging is outlined.
Seit 2009 entsteht die historisch-kritische Hybridediton von Goethes „Faust“. Im Januar 2013 ist im Rahmen dieses editorischen Unternehmens die Röntgenfluoreszenzanalyse (RFA) zum Einsatz gekommen, um auf der Grundlage der Zusammensetzung der verwendeten Eisengallustinten entstehungsgeschichtliche Erkenntnisse über das handschriftliche Material zu gewinnen. Im Mittelpunkt stand neben der zeitlichen Einordnung von Handschriften vor allem die Identifikation von unterscheidbaren Bearbeitungsschichten innerhalb der jeweiligen Handschrift. Besonderes Interesse kommt dabei denjenigen Handschriften zu, von denen sicher ist oder angenommen wird, dass Goethe sie über längere Zeit hinweg oder sogar in sehr großen Abständen bearbeitet hat.
Die von der traditionellen Philologie in Anschlag gebrachten äußeren und inneren Gründe und die darauf gestützten Hypothesen haben nicht ausgedient. Hypothesen zur Datierung von Handschriften Goethes lassen sich in der Regel gut anhand bestehender materieller Zusammenhänge (wie der Zuordnung des Papiers in Kombination mit der Bestimmung der Schreiberhand) verifizieren. Dagegen ermöglicht materialwissenschaftliche Charakterisierung der Eisengallustinten alleine zunächst noch keine vergleichbar genauen Datierungen. Eine Kombination der beiden Zugänge und Verfahren kann jedoch dort Erkenntnisse zutage fördern, wo die traditionellen philologischen Mittel ausgeschöpft sind. Dies wird exemplarisch innerhalb der Publikation gezeigt werden.
Modification of polyethylene and polypropylene surfaces by atmospheric-pressure plasmas using mixtures of nitrogen and hydrogen was studied using Fouriertransform infrared spectroscopy in the attenuated total reflection mode (FTIR-ATR) and by near-edge x-ray absorption fine structure spectroscopy (NEXAFS) in order to shed some light on the chemical nature of nitrogen-containing functional Groups on the polymer surface. Using FTIR-ATR spectroscopy combined with hydrogendeuterium isotope exchange of active hydrogen atoms, it was shown that the direct treatment of PE foils by dielectric barrier discharges (DBDs) in N2/H2 mixtures and a subsequent exposure of the samples to the ambient air results in the formation of –NH2 moieties of primary amides on the polymer surface. Corresponding in situ experiments with streaming N2/H2 DBD post-discharges virtually free of H2O and O2, on the other hand, showing the absence of –NH2, proving that no primary amines or amides are formed by this treatment although substantial amounts of nitrogen are incorporated. Moreover, directly N2/H2-plasma-treated polymer surfaces, similar to afterglow-treated low-density polyethylene (LDPE), show amphiphilic character as to be seen by chemical derivatization with nucleophilic reagents 4-(trifluoromethyl) phenylhydrazine and 4-(trifluoromethyl)benzylamine, in addition to electrophilic aromatic aldehydes normally
used to derivatize such surfaces.
The presence of imines or other functional groups with CN moieties which may be invoked to explain the dual (amphiphilic) reactivity is proven by NEXAFS studies on ultrathin plasma-treated PE films, confirming significant amounts of nitrogen in CN bonds and carbon in CC bonds.
The development of low carbon cements has gained great importance over the last decades. In the effort to limit the carbon content related to its production, cement is often replaced with supplementary cementitious materials (SCMs). Commonly used SCMs such as fly ash and slag have undergone extensive research, but are currently limited in supply and availability. Among the researched SCMs, calcined clays have proven to be a suitable alternative pozzolan due to their worldwide availability and extremely low calcination temperatures when compared to clinker. This poster presents the results from an ongoing project, aimed at obtaining pozzolans, available in sufficient quantities for Portland-pozzolana cement production in Germany. The poster shows the analyses of seven brick clays from various deposits in central Germany. The chemical and mineral composition of the brick clays was evaluated through inductively coupled plasma – optical emission spectroscopy (ICP-OES), X-ray diffraction (XRD), and thermogravimetric analysis (TG/DTG). The particle size distribution (PSD) was also evaluated by laser granulometry. The results show that the brick clays contain a substantial amount of kaolinite, illite and smectite minerals, the relative proportions differing significantly between deposits. The suitable calcination temperature range of the clays is also evaluated through TG/DTG analysis to obtain the optimum degree of dehydroxylation from which the bricks clays can be suitable for use as a pozzolan.
At the core of luminescence color and lifetime Tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the Impact of the particle architecture for commonly used sensitizer (S) and activator (A) Ions. In this respect, a series of core@Shell NaYF4 UCNPs doped with Yb3+ and Ho3+ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@..., ...@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core-Shell NPs. As refealed by quantitative steady-state and time-resolved luminescence studies, the relative spatial Distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical Impact on ther luminescence characteristics. Although the increased amount of Yb3+ Ions boosts UCNP Performance by amplifying the Absorption, the Yb3+ ions can also efficiently dissipate the energy stored in the material through energy Migration to the surface, thereby reducing the Overall energy Transfer Efficiency to the activator ions. The results provide yet another proof that UC Phosphor chemistry combined with materials Engineering through intentional core@shell structures may help to fine-tune the luminescence Features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and Display technologies.
For in-service inspections on wheelset axles with a hollow drilling, mechanized ultrasound inspection systems with single element probes are typically used. The ultrasonic testing in the zones close to the external surface of the railway axles can be realized from the inside of the bore hole, without demounting the wheelset and without dismantling the wheels and the brake discs. The testing system must be able to find flaws in the external surface of the hollow shafts, whose surface lies in the radial-radial plane, these are called transversal flaw. Presently testing systems are used, where scanning is realized in the circumferential direction by mechanical rotation of the probe system in the actual drilling. The phased array probe system, which is presented here, can carry out the rotation scan electronically. The scan can be carried out by simply moving the system forward and backwards through the drilling without mechanical rotation. Manipulation becomes simpler and the inspection time can be shortened considerably. The ultrasonic beam can be inclined exactly and be focused in the plane vertical to the specimen axis.
The probe is designed with help of indispensable simulations using especially designed software developed by BAM. The feasibility and the alignment between the simulated and experimental results were shown in earlier projects reported by Boehm et al. (2006) and Völz et al. (2012). The main task here is to optimize a probe for bore holes with a diameter of 65 mm with an increase in sensitivity and a high spatial resolution. This development will be carried out by use of extensive simulations and result in certain changes of the relevant probe parameters.
A multilayer consisting of two different rotaxanes was investigated with different analytical methods. The rotaxanes can be switched with two different stimuli - chemical and photochemical. XPS indicates that our layer-by-layer approach worked and a layer growth with every deposition step is present. NEXAFS showed that both stimuli cause an increase of the multilayer's preferential orientation.
A sealable ultrathin window sample cell for the study of liquids by means of soft X-ray spectroscopy
(2017)
A new sample cell concept for the analysis of liquids or solid-liquid interfaces using soft X-ray spectroscopy is presented, which enables the complete sealing of the cell as well as the Transport into vacuum via, for example, a load-lock system. The cell uses pressure monitoring and active as well as passive pressure regulation systems, thereby facilitating the full control over the pressure during filling, sealing, evacuation, and measurement. The cell design and sample preparation as well as the crucial sealing procedure are explained in detail. As a first proof-of-principle experiment, successful nitrogen K-edge fluorescence yield near-edge X-ray absorption fine structure experiments of a biomolecular solution are presented. For this purpose, it is shown that the careful evaluation of all involved parameters, such as window type or photon flux, is desirable for optimizing the experimental result.
Fourteen hollow and one cast anthropomorphic and zoomorphic figurines produced in Incan times for ritual offerings from the Ethnologisches Museum in Berlin were selected to investigate the technologies and alloys used for their fabrication with portable optical microscopy and non-destructive XRF elemental analysis. This group of gold and silver figurines includes typical specimens of the Inca production, such as the four silver figurines from the Island Coati in Lake Titicaca and the two gold figurines from Pachacamac, as well as specimens that are seldom present in collections, which makes them atypical. In addition to the tall figurines with atypical hair or standing pose, one bicolour figurine half silver, half gold) and another with coloured inlays were included in this study for comparison. The large majority of the silver specimens are made from very high quality alloys and the gold figurines are made from alloys containing low copper contents and silver ranging from 30wt% to 52wt%.
The vulnerability of low quality concrete to changing weather conditions is well known. The constant exposure to temperature changes, biological activity, and humidity ends up in damage to buildings and structures which contain this material. It is therefore necessary to take preventive measures to control the extent of the damage done by weathering and possible penetration of adverse chemicals into structures which need public safety.
The Federal Institute for Materials Research and Testing (BAM), in cooperation with the small enterprise LinTech GmbH, is working on a project to monitor humidity changes in concrete by analyzing the changes in signal strength (RSSI) from Bluetooth Low Energy sensors. In this paper, we show results which demonstrate the influence of changing water content in concrete on the received RSSI. We observed that as water content in concrete decreases, the received RSSI improves. However, the damping effect is not linearly proportional to water content, rather exponentially proportional. This suggests that changes in the received signal strength are more easily observed when water content in concrete is higher. Finally, we reconstructed a RSSI distribution map using computed tomography
The vulnerability of low quality concrete to changing weather conditions is well known. The constant exposure to temperature changes, biological activity, and humidity ends up in damage to buildings and structures which contain this material. It is therefore necessary to take preventive measures to control the extent of the damage done by weathering and possible penetration of adverse chemicals into structures which need public safety.
The Federal Institute for Materials Research and Testing (BAM), in cooperation with the small enterprise LinTech GmbH, is working on a project to monitor humidity changes in concrete by analyzing the changes in signal strength (RSSI) from Bluetooth Low Energy sensors. In this paper, we show results which demonstrate the influence of changing water content in concrete on the received RSSI. We observed that as water content in concrete decreases, the received RSSI improves. However, the damping effect is not linearly proportional to water content, rather exponentially proportional. This suggests that changes in the received signal strength are more easily observed when water content in concrete is higher. Finally, we reconstructed a RSSI distribution map using computed tomography.
Melanised cell walls and extracellular polymeric matrices protect rock-inhabiting microcolonial fungi from hostile environmental conditions. How extracellular polymeric substances (EPS) perform this protective role was investigated by following development of the model microcolonial black fungus Knufia petricola A95 grown as a sub-aerial biofilm. Extracellular substances were extracted with NaOH/formaldehyde and the structures of two excreted polymers studied by methylation as well as NMR analyses. The main polysaccharide (~ 80%) was pullulan, also known as α-1,4-; α-1,6-glucan, with different degrees of polymerisation. Αlpha-(1,4)-linked-Glcp and α-(1,6)-linked-Glcp were present in the molar ratios of 2:1. A branched galactofuromannan with an α-(1,2)-linked Manp main chain and a β-(1,6)-linked Galf side chain formed a minor fraction (~ 20%). To further understand the roles of EPS in the weathering of minerals and rocks, viscosity along with corrosive properties were studied using atomic force microscopy (AFM). The kinetic viscosity of extracellular K. petricola A95 polysaccharides (≈ 0.97 × 10-6 m2 s-1) ranged from the equivalent of 2% (w/v) to 5% glycerine, and could thus profoundly affect diffusion-dominated processes. The corrosive nature of rock-inhabiting fungal EPS was also demonstrated by its effects on the aluminium coating of the AFM cantilever and the silicon layer below.
Magnetic iron oxide nanoparticle clusters (mnpc) coated with organic stabilizers were investigated using scanning transmission x-ray microscopy (STXM). Simultaneous surface and bulk sensitive Fe L3 edge absorption spectra, obtained using a photomultiplier tube and a channeltron, were used to detect subtle changes in the oxidation state in the surface and bulk of Iron Oxide mnpc.
The effectiveness of this mode of STXM operation is demonstrated for These nanoparticle clusters.
The sonication process is commonly used for de-agglomerating and dispersing nanomaterials in aqueous based media, necessary to improve homogeneity and stability of the suspension. In this study, a systematic step-wise approach is carried out to identify optimal sonication conditions in order to achieve a stable dispersion. This approach has been adopted and shown to be suitable for several nanomaterials (cerium oxide, zinc oxide, and carbon nanotubes) dispersed in deionized (DI) water. However, with any change in either the nanomaterial type or dispersing medium, there needs to be optimization of the basic protocol by adjusting various factors such as sonication time, power, and sonicator type as well as temperature rise during the process. The approach records the dispersion process in detail. This is necessary to identify the time Points as well as other above-mentioned conditions during the sonication process in which there may be undesirable changes, such as damage to the particle surface thus affecting surface properties. Our goal is to offer a harmonized approach that can control the Quality of the final, produced dispersion. Such a guideline is instrumental in ensuring dispersion quality repeatability in the nanoscience community, particularly in the field of nanotoxicology.
Fiber Optic sensing @BAM
(2017)
Currently, research in chemical manufacturing moves towards flexible plug-and-play approaches focusing on modular plants, capable of producing small scales on-demand with short down-times between individual campaigns. This approach allows for efficient use of hardware, a faster optimization of the process conditions, and thus, an accelerated introduction of new products to the market. Driven mostly by the search for chemical syntheses under biocompatible conditions, so-called “click” chemistry rapidly became a growing field of research. The resulting simple one-pot reactions are so far only scarcely accompanied by an adequate optimization via comparably straightforward and robust analysis techniques.
Here we report on a fast and reliable calibration-free online high field NMR monitoring approach for technical mixtures. It combines a versatile fluidic system, continuous-flow measurement with a time interval of 20 s per spectrum, and a robust, automated algorithm to interpret the obtained data. All spectra were acquired using a 500 MHz NMR spectrometer (Varian) with a dual band flow probe having a 1/16-inch polymer tubing working as a flow cell. Single scan 1H NMR spectra were recorded with an acquisition time of 5 s, relaxation delay of 15 s. As a proof-of-concept, the thiol-ene coupling between N-boc cysteine methyl ester and allyl alcohol was conducted in non-deuterated solvents while its time-resolved behaviour was characterised with step tracer experiments.
Through the application of spectral modeling the signal area for each reactant can be deconvoluted in the online spectra and thus converted to the respective concentrations or molar ratios. The signals which were suitable for direct integration were used herein for comparison purposes of both methods.
Process analytical techniques are extremely useful tools for chemical production and manufacture and are of particular interest to the pharmaceutical, food and (petro-) chemical industries.
Today, mainly optical online methods are applied. NMR spectroscopy has a high potential for direct loop process control. Compact NMR instruments based on permanent magnets are robust and relatively inexpensive analysers, which feature advantages like low cost, low maintenance, ease of use, and cryogen-free operation. Instruments for online NMR measurements equipped with a flow-through cell, possessing a good signal-to-noise-ratio, sufficient robustness, and meeting the requirements for integration into industrial plants (i.e., explosion safety and fully automated data analysis) are currently not available off the rack.
A major advantage of NMR spectroscopy is that the method features a high linearity between absolute signal area and sample concentration, which makes it an absolute analytical comparison method which is independent of the matrix. This is an important prerequisite for robust data evaluation strategies within a control concept and reduces the need for extensive maintenance of the evaluation model over the time of operation. Additionally, NMR spectroscopy provides orthogonal, but complimentary physical information to conventional, e.g., optical spectroscopy. It increases the accessible information for technical processes, where aromatic-to-aliphatic conversions or isomerizations occur and conventional methods fail due to only minor changes in functional groups.
As a technically relevant example, the catalytic hydrogenation of 2-butyne-1,4-diol and further pharmaceutical reactions were studied using an online NMR sensor based on a commercially available low-field NMR spectrometer within the framework of the EU project CONSENS (Integrated Control and Sensing).
Validation report on NMR
(2017)
The departure from the current automation landscape to next generation automation concepts for the process industry has already begun. Smart functions of sensors simplify their use and enable plug and play integration, even though they may appear to be more complex at first sight. Smart sensors enable concepts like self-diagnostics, self-calibration, and self-configuration/ parameterization whenever our current automation landscape allows it.
Here we summarize the currently discussed general requirements for process sensors 4.0 and introduce a smart online NMR sensor module as example, which was developed for an intensified industrial process funded by the EU’s Horizon 2020 research and innovation programme (www.consensspire.eu).
Our current projects focus on the material analysis of the writing materials
kept in the Taylor-Schechter Collection at Cambridge University Library,
which houses the largest collection of Cairo Geniza fragments, about 190,000.
Although Geniza manuscripts have attracted a great deal of scholarly attention,
the material aspects of these documents seem to have been largely neglected.
The current study aims to obtain information on the composition of the writing
supports and the inks that were used, the production of the original manuscripts
and the history of their degradation. The collected data should supplement the
description based on Hebrew palaeography and codicology. Moreover, a characterisation
of the writing materials would provide insights on trade, local production
techniques and social structures. The tabulated results have the potential to
be used as geo-chronological markers if sufficient data is collected.
For our study, we chose Hebrew legal documents and letters from three communities
that co-existed in Fustat (today Cairo) in the 11th century: the Jerusalemite
(or ‘Palestinian’) community, the Babylonian community and the Karaites, three
different communities with different scribal traditions. In addition to this, we
studied non-biblical scrolls attributed to the Palestinian and Babylonian communities.
The question we addressed was whether we can correlate the use of a
specific type of ink to an objective criterion.
For our analysis at Cambridge University Library, we used a number of protocols
developed at BAM (Bundesanstalt für Materialforschung und -prüfung) in
Berlin and at the Centre for Study of Manuscript Cultures, University of Hamburg
(CSMC). These include reflectographic examination followed by non-destructive
X-ray fluorescence (XRF) analysis using transportable instruments so that the
analysis can be carried out in situ.
We have illustrated our approach here by providing two examples. The first one
describes our investigation of the leather fragment containing a portion of the
Babylonian Talmud on its hair side (TS Misc.26.53.17). The second example illustrates
our ability to compare iron-gall inks using the XRF method. In this case,
we explored the question of the codicological attribution of three fragments (TS
F17.4, TS 12.755 and TS 12.756) to the same Talmud manuscript.
Near Ambient Pressure XPS opens up a new world of possibilities for measurements with XPS. While there are examples where NAP-XPS has been used to study electrochemical processes and heterogeneous catalysis, little attention has been paid to its potential use in biological materials. Until now, bacteria have only been characterised with conventional XPS, which requires tedious sample preparation usually involving freeze drying, a treatment that may degrade biological sample constituents. By studying biological samples in their native wet states, new insight about composition, absorption and transport of drugs through cell membranes and extracellular polymeric substance (EPS) layers can be obtained. Both artificial model-films of exopolysaccharides and biofilms of Escherichia Coli have been characterised at pressures ranging from ultra-high vacuum to 15 mbar by using SPECS’ EnviroESCA NAP-XPS instrument and conventional XPS. By applying antimicrobials to model biofilms, some of which are known to be resistant towards the antimicrobial in question, the distribution of antimicrobials in biofilms has been studied. Capabilities and limitations of the approach will be discussed.
Mechanochemistry is increasingly used for synthesizing soft matter materials including metal organic compounds and cocrystals.1,2 The ever-increasing interest in this method is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity. Time-resolved in situ investigations of milling reactions provide direct insights in the underlying mechanisms.3,4 We recently introduced a setup enabling in situ investigation of mechanochemical reactions using synchrotron XRD combined with Raman spectroscopy (Fig.1a) The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structure and thus obtaining reliable data for mechanistic studies. In this talk I will discuss our recent results investigating the formation of (polymorphic) cocrystals.
Inks and Pigments
(2017)
The writing materials used in various cultures and epochs can be divided into two groups. The first comprises materials that write themselves, producing script by rubbing their own material off onto the writing surface. It includes charcoal, graphite, chalk, raddle, and metal styluses. Depending on the material and consistency, these are cut or pressed to make styluses and then used for writing.
The second group comprises all coloring liquids that are applied to the writing surface with a quill, pen, or printing block. It includes inks made from dye solutions (for example, tannin inks) and those made from pigment dispersions (for example, sepia, soot, and bister inks). The latter are sometimes also rubbed as pastes into letters incised into the writing surface, where they increase visual contrast.
Due to the variety of recipes and the natural origin of raw materials, there is a wide range of different components and impurities in writing materials.
Soluble inks (Tinten)
Soluble inks are based mainly on dyes forming a water solution. Colored inks were manufactured with different plant or insect dyes (e.g. Brazil wood, kermes). To stabilize the volatile material, the dyes were mixed with a mordant (e.g., alum).
Brown plant inks – best-known as blackthorn or Theophilus’ inks – are usually produced from the blackthorn bark and wine. In the early European Middle Ages, inks of this kind were widely used in the production of manuscripts in monasteries. Usually, they are light brown, so sometimes small amounts of iron sulfate were added, which led to what was called an “imperfect” iron gall ink. The difference between “classic” iron gall ink and such imperfect ink is therefore not clear: the distinction is not possible, especially with the naked eye.
Dispersion inks (Tuschen)
According to its generic recipe, one of the oldest black writing materials is produced by mixing soot with a binder dissolved in a small amount of water. Thus, along with soot, binders such as gum arabic (ancient Egypt) or animal glue (China) are among the main components of soot inks. From Pliny’s detailed account of the manufacture of various soot-based inks, we learn that, despite its seeming simplicity, producing pure soot of high quality was not an easy task in Antiquity. Therefore, we expect to find various detectable additives that might be indicative of the time and place of production. One such carbon ink requires the addition of copper sulfate . The experimental discovery of this ink in 1990 led to a misleading expression “metal ink” that is sometimes found in the literature.
Colored dispersion inks based on pigments such as orpiment, cinnabar, or azurite have been known since Antiquity. Natural or artificially produced minerals are finely ground and dispersed in a binding medium. As in soot inks, water-soluble binders such as gum arabic or egg white were used.
Iron gall ink (Eisengallustinten)
Iron gall inks are a borderline case between these two groups. They are produced from four basic ingredients: galls, vitriol as the main source of iron, gum arabic as a binding media, and an aqueous medium such as wine, beer, or vinegar. By mixing gallic acid with iron sulfate, a water-soluble ferrous gallate complex is formed; this product belongs to the type “soluble inks”. Due to its solubility, the ink penetrates the writing support’s surface, making it difficult to erase. Exposure to oxygen leads to the formation of insoluble black ferric gallate pigment, i.e., “dispersion ink”.
Natural vitriol consists of a varying mixture of metal sulfates. Since for ink making it was obtained from different mines and by various techniques, inks contain many other metals, like copper, aluminum, zinc, and manganese, in addition to the iron sulfate. These metals do not contribute to color formation in the ink solution, but possibly change the chemical properties of the inks.
For many years after the discovery of the Dead Sea Scrolls, text analysis and fragment attribution were the main concern of the scholars dealing with them. The uncertain archaeological provenance of a large part of the collection added difficulties to the already formidable task of sorting thousands of fragments. After 60 years of scholarly research the questions of origin, archaeological provenance and correct attribution of the fragments are still debated. To help address these questions we have developed a methodology suitable to the material studies of the scrolls using combinations of X-ray, FTIR and Raman techniques. On the one hand, an accurate characterization of the highly heterogeneous writing media of the Dead Sea Scrolls leads to a reliable reconstruction of their history and, thus, contributes significantly to the current debate. On the other hand, it provides new information on the production of ancient parchment towards the end of the Second Temple period, opening a new page in the historical study of technology.
Mechanochemistry is increasingly used for synthesizing soft matter materials including metal organic compounds and cocrystals.1,2 The ever-increasing interest in this method is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity. Time-resolved in situ investigations of milling reactions provide direct insights in the underlying mechanisms.3,4 We recently introduced a setup enabling in situ investigation of mechanochemical reactions using synchrotron XRD combined with Raman spectroscopy (Fig.1a) The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structure and thus obtaining reliable data for mechanistic studies. In this talk I will discuss our recent results investigating the formation of (polymorphic) cocrystals.6-7 First investigations of a mechanochemical synthesis under controlled temperature (Fig 2a) which allow determining the activation barrier are presented.8 Furthermore, in situ Raman spectroscopy coupled with thermography revealed a low temperature increase during milling reactions due to the mechanical impact and clear temperature increases as a result of the reaction heat.
Mechanochemistry is increasingly used for synthesizing soft matter materials including metal organic compounds and cocrystals. The ever-increasing interest in this method is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity. Time-resolved in situ investigations of milling reactions provide direct insights in the underlying mechanisms. We recently introduced a setup enabling in situ investigation of mechanochemical reactions using synchrotron XRD combined with Raman spectroscopy. The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structure and thus obtaining reliable data for mechanistic studies. In this contribution, I will discuss our recent results investigating the formation of (polymorphic) cocrystals and metal phosphonates. First investigations of a mechanochemical synthesis under controlled temperature which allow determining the activation barrier are presented. Furthermore, in situ Raman spectroscopy coupled with thermography revealed a low temperature increase during milling reactions due to the mechanical impact and clear temperature increases as a result of the reaction heat.5 Our results indicate that in situ investigation of milling reactions offer a new approach to tune and optimize mechanochemically synthesized compounds.
Mechanochemistry is increasingly used for synthesizing soft matter materials including metal organic compounds and cocrystals.1 The ever-increasing interest in this method is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity. Time-resolved in situ investigations of milling reactions provide direct insights in the underlying mechanisms.2,3 We recently introduced a setup enabling in situ investigation of mechanochemical reactions using synchrotron XRD combined with Raman spectroscopy. The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structure and thus obtaining reliable data for mechanistic studies. In this contribution, I will discuss our recent results investigating the formation of (polymorphic) cocrystals and metal phosphonates.4 First investigations of a mechanochemical synthesis under controlled temperature which allow determining the activation barrier are presented. Furthermore, in situ Raman spectroscopy coupled with thermography revealed a low temperature increase during milling reactions due to the mechanical impact and clear temperature increases as a result of the reaction heat.5 Our results indicate that in situ investigation of milling reactions offer a new approach to tune and optimize mechanochemically synthesized compounds.
Mechanochemistry is increasingly used for synthesizing soft matter materials including metal organic compounds and cocrystals. The ever-increasing interest in this method is contrasted by a limited mechanistic understanding of the mechanochemical reactivity and selectivity. Time-resolved in situ investigations of milling reactions provide direct insights in the underlying mechanisms. We recently introduced a setup enabling in situ investigation of mechanochemical reactions using synchrotron XRD combined with Raman spectroscopy. The specific combination allows to study milling processes comprehensively on the level of the molecular and crystalline structure and thus obtaining reliable data for mechanistic studies. In situ Raman spectroscopy coupled with thermography revealed a low temperature increase during milling reactions due to the mechanical impact and clear temperature increases because of the reaction heat.
Based on the data, temperature rises as postulated in the magma plasma and hot spot theory can be excluded for soft matter milling syntheses. Our results indicate that in situ investigation of milling reactions offer a new approach to tune and optimize mechanochemically synthesized compounds.
Monitoring chemical reactions is the key to chemical process control. Today, mainly optical online methods are applied. NMR spectroscopy has a high potential for direct loop process control. Compact NMR instruments based on permanent magnets are robust and inexpensive analysers, which feature advantages like low maintenance, ease of use, and cryogen-free operation. Instruments for online NMR measurements equipped with a flow-through cell, possessing a good signal-to-noise-ratio, robustness, and meeting the requirements for integration into industrial plants (i.e., explosion safety and fully automated data analysis) are currently not available off the rack.
Intensified continuous processes are in focus of current research. Flexible (modular) chemical plants can produce different products using the same equipment with short down-times between campaigns and quick introduction of new products to the market. In continuous flow processes online sensor data and tight closed-loop control of the product quality are mandatory. Otherwise there is a huge risk of producing large amounts of out-of-spec (OOS) products. This is addressed in the European Union’s Research Project CONSENS (www.consens-spire.eu) by development and integration of smart sensor modules for process monitoring and control within such modular plant setups.
The presented NMR module is provided in an explosion proof housing with a module size of 57 x 57 x 85 cm and involves a compact 43.5 MHz NMR spectrometer together with an acquisition unit and a programmable logic controller for automated data preparation (phasing, baseline correction) and evaluation. Indirect Hard Modeling (IHM) was selected for data analysis of the low-field NMR spectra. A set-up for monitoring continuous reactions in a thermostated 1/8” tubular reactor using automated syringe pumps was used to validate the IHM models by using high-field NMR spectroscopy as analytical reference method.
Colloidal metalorganic frameworks as novel biofunctional nanoparticles for immunoassay applications
(2017)
Metal-organic framework (MOF) colloids have unique features that render them ideal signalling agents for realizing advanced immunoassay-based detection systems. MOFs are porous coordination polymers of metal nodes and organic linkers. The pore size of MOFs can be engineered and tailored to allow specific host (MOF) and guest (analyte) interactions. The particle sizes of the colloidal MOF can be tailored by employing methods from colloidal chemistry in wet synthesis. The adaption of established Layer-by-Layer polyelectrolyte coating protocols [1] allows equipping colloidal MOF particles with a nanometer thin polyelectrolyte membrane. This polyelectrolyte membrane serves as an interface for antibody binding. These biofunctional MOF nanoparticles have shown a strong immuno-binding that is sufficient for solid state immunoassays. Our current research addresses the design of luminescence encoded colloidal particle libraries by adjusting the ratios of e.g. Terbium (green) and Europium (red) metal nodes in mixed lanthanide based MOF-76. These mixed lanthanide MOF-76 particles are envisioned to allow multiplexed immuno-detection of endocrine disruptors such as bisphenol A.
In addition we investigate the detection of analytes that do not allow the production of antibodies due to their inherent properties. Such “difficult analytes” have a strong hydrophobicity or are very small or highly toxic molecules. One example is the common plasticizer dioctylphthalate that is also a potent endocrine disruptor. MOF colloids can address this issue by specific host (MOF) : guest (analyte) interactions that result in analyte-specific colour change or exciplex-based fluorescence emission. Our overall aim is to develop methodologies that allow parallel sensing of two endocrine disruptors (e.g. bisphenol A & phthalates) by simultaneous immuno-detection and MOF:analyte specific interactions.
The cement proficiency testing (PT) scheme was set up by the German Metrology Institute (PTB) and the Federal Institute for Materials Research and Testing (BAM) in 2012. The PT scheme was a spin-off from a European Commission and African, Caribbean and Pacific-Group of States funded project entitled SPIN – Spearhead Network for Innovative, Clean and Safe Cement and Concrete Technologies (www.spin.bam.de). The SPIN project aimed at crosslinking experts in industry and policy making bodies, with the prospect of establishing a sustainable cement and concrete construction capacity in Africa.
After a successful first pan-African proficiency testing scheme in 2012/2013, it was decided to establish the scheme permanently and independent of the SPIN project.
The main focus of setting up a testing scheme was to enable all cement testing laboratories in Africa to evaluate their competence and efficiency in cement testing and further enhance their capacity to obtain better quality products according to their environment. The acronym developed for the PT scheme is PACE-PTS (Pan-African Cement Proficiency Testing Scheme). The framework for the PT scheme was set up jointly among the organisers and the first participants. The first PT scheme was initiated in Dar Es Salaam in 2012 followed by a final workshop in Berlin in 2013. The second PT scheme began in 2014. A final workshop was organised in Dar es Salaam in 2015. The third and current scheme was started in 2016 and the final workshop is held in Yaoundé.
With ongoing innovation in process technology, the challenges of concrete technology are more and more focused on the rheological optimisation for these processes, since improper mixture stability or poor compaction ability negatively affect the concrete homogeneity and quality. However, along with the increasing complexity of today’s concrete mixture compositions, concrete becomes more prone to failure regarding the casting process. Variable properties of the raw materials typically cause changing workability. The reasons can be found among others in scattering water contents, physical or chemical properties of the cement or varying environmental temperatures. Robustness in the delicately adjusted rheology, however, is of utmost importance for modern and future process technology, from sprayed concrete over pumpable concrete towards 3D-printing, with regard to the long-term strength, the function and the durability. Typically, material induced changes cannot be identified easily due to the complex interactions of concrete constituents. Therefore, a precise and prompt counteraction is impossible. However, it is known that the yield stress can be controlled by addition of supplementary superplasticizer or stabilising agent. In combination with computerized process observation tools that can rapidly interpret and react on changes in the rheology, it is therefore thinkable, that only these two admixture types can adjust the rheology steadily and permanently, regardless of the actual root cause for observed macroscopic rheology change. The presentation will firstly give a comprehensive overview of effects at the interface between pore solution, particles and hydrates, which affect the rheology of fresh concrete. Secondly, ways are recommended how the rheology can be actively manipulated before eventually computerized methods are demonstrated that help to actively and rapidly assess and counteract performance scatter during steady casting processes.
In October 2011 the European Commission (EC) published a "Recommendation on the definition of na-nomaterial" (2011/696/EU), to promote consistency in the interpretation of the term "nanomaterial" for legislative and policy purposes in the EU. The EC NM Definition includes a commitment to its review in the light of experience and of scientific and technological developments. This review is ongoing in 2017 and as a contribution to the review the Joint Research Centre of the European Commission (JRC) has already developed a series of three scientific-technical reports with the title: “Towards a review of the EC Recommendation for a definition of the term nanomaterial” which provides to the EC policy services sci-ence-based options on how the definition could be revised or supported with additional guidance.
The overarching nature and wide scope of the EC NM Definition, as it does not exclude a priori any particulate material regardless the state, form and size, creates many analytical challenges in its imple-mentation for all stakeholders, including enterprises and regulators.
The NanoDefine project has as core objective to support the implementation of the EC NM Definition. In an earlier report1 key aspects of the EC NM Definition were addressed, with the goal to improve the implementability of the EC NM Definition. Based on further developments and results obtained in NanoDefine project that first report was updated and is presented here. The key aspects are discussed based on the results of four years of research performed within the framework of the project. As a result this report assesses how well the requirements of the EC NM Definition can be fulfilled with currently available analytical possibilities. It presents recommendations and options on a revision of the EC NM Definition to improve the implementability of the definition based on currently available analytical possi-bilities, according to the state of the art in 2017. Of the technical issues considered in this report, the following seem to deserve the most attention in terms of clarification of the definition and/or provision of additional implementation guidance: 'external dimension', ‘number based particle size distribution‘, ‘polydispersity‘ and ‘upper size limit‘, the term ‘particle’, the ‘means to prove that a material is not a nanomaterial‘ and ‘the role of the volume specific sur-face area (VSSA)‘, and "particulate materials'.
In this study, series of coatings with the goal of sensitising gold SPR sensors towards CO, NH4, etc. were prepared. To better understand the mechanism behind the sensitizing effect and to enable the targeted production of optimized layers, the wide range of coatings was studied by multiple methods from spectroscopic ellipsometry for their dielectric function, by XPS for chemical composition and SEM, TEM to determine their microscopic structure. The coatings were deposited at inert Ar gas and reactive Ar/O2 gas mixture by RF magnetron sputtering or DC pulsed magnetron sputtering with settable RF bias on the substrates. The plasma processes were monitors by mass spectrometry.
The metal oxide coatings in SPR sensors have to be prepared reproducible with thickness about 5 nm therefore lower deposition rate conditions were advantages.
Variations in the isotope amount composition of some elements like lithium, boron, magnesium, calcium and copper have been used as proof of provenance of a sample and to describe geological processes. Routinely, isotope compositions are determinate by mass spectrometry; the working horse of the isotope analysis. However, mass spectrometric methods are expensive, time consuming and they require a high qualified analysist.
Here an alternative faster and low cost optical method for isotope ratio determination is proposed: high-resolution continuum source molecular absorption spectrometry (HR-CS-MAS). Stable isotope amount composition of X= Li, B, Mg, Ca, Cu and Sr have been determined by monitoring the absorption spectrum of their monohydride (XH) in graphite furnace HR-CS-MAS.
In this study, series of coatings with the goal of sensitising gold SPR sensors towards CO, NH4, etc. were prepared. To better understand the mechanism behind the sensitizing effect and to enable the targeted production of optimized layers, the wide range of coatings was studied by multiple methods from spectroscopic ellipsometry for their dielectric function, by XPS for chemical composition and SEM, TEM to determine their microscopic structure. The coatings were deposited at inert Ar gas and reactive Ar/O2 gas mixture by RF magnetron sputtering or DC pulsed magnetron sputtering with settable RF bias on the substrates. The plasma processes were monitors by mass spectrometry.
The metal oxide coatings in SPR sensors have to be prepared reproducible with thickness about 5 nm therefore lower deposition rate conditions were advantages.
Heavy alcohol induces several chronic diseases, including cirrhosis. Consequently, cirrhotic patients need liver transplantation. However, alcoholic patients are not suitable for this. How can be physicians sure of non-alcohol consumption of a potential organ receptor? Monitoring of biomarkers by mass spectrometric techniques is today the most suitable option. This subject was discussed at the Graduate School of Analytical Science Adlershof (SALSA) in Berlin, as a part of a lecture series in analytical science.
Analysis of stable isotopes has been used as proof of provenance of mineral and biological samples, to estimate a contamination source and to determine geological processes. This kind of analysis needs high accuracy and precision for reliable conclusions. Currently, stable isotope analysis is dominated by mass spectrometric techniques that are time consuming and expensive. Here we present a fast and low cost alternative for isotope analysis of boron and magnesium: high-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GFMAS). Two stable isotope systems were evaluated separately: boron (10B:11B) and magnesium 24Mg:25Mg:26Mg). Their isotope amount ratios were estimated by monitoring their absorption spectra in-situ generated monohydrides. The molecular absorption spectrum of a XH molecule (X= B or Mg) with n isotopes would be a linear combination of n isotopologue spectra and the amount of each component (isotope) could be calculated by a multivariate regression (n= 2 and 3 for B and Mg respectively). For the Analysis of boron certified reference materials (CRM), the band 1→1 for the electronic transition X1Σ+ → A1Π was measured around wavelength 437.1 nm. Since boron has a Memory effect in graphite furnaces, a combination of 2 % (v/v) hydrogen gas in argon, 1 % trifluoromethane in argon, an acid solution of calcium chloride and mannitol as chemical modifiers were used during the BH vaporization at 2600 °C. Partial least square regression (PLS) for analysis of samples was applied. For this, a spectral library with different isotope ratios for PLS regression was created. Magnesium does not have memory effect. Therefore, only 2 % of hydrogen in argon as gas modifier during vaporization at 2500 °C was employed for analysis of magnesium CRM. Absorption spectra of MgH for the X2Σ→A2Π electronic transition (band 0→0) were recorded around wavelength 513.45 nm. A similar PLS procedure to the BH was applied. Results for B and Mg CRM are metrologically compatible with those reported by mass spectrometric methods. An accuracy of 0.08 ‰ for B and 0.1 ‰ Mg was obtained as the average deviation from the isotope CRM. Expanded uncertainties with a coverage factor of k = 2 range between 0.10 - 0.40 ‰.
Immunoassays are in the majority of formats heterogeneous assays with one of the commodities – antibody or antigen – immobilized on a solid substrate or sometimes to nanoparticles or beads. All these formats require a washing step in order to separate bound from non-bound species before generating the measurement signal.
Measuring fluorescence polarization is a method to distinguish between a fluorescent macromolecule and a low-molecular weight fluorophore. After irradiation of the sample with polarized light, a macromolecule like e.g. an antibody, will emit still highly polarized light (high polarization, resp. small difference in degree of polarization to the background). In a fluorescence polarization immunoassay, the fluorescence of an analyte surrogate (a fluorescence “tracer”) is followed. Depolarization is high and so the measured polarization is low. When antibody is added, the tracer is bound, depolarization decreases and the in polarization is high. Increasing amounts of analyte more and more impede the tracer being bound by the tracer and thus the decreases, the typical sigmoidal relationship is obtained (Fig. 1). We dispose of 5 polarization platforms reading in plate mode, strip mode and cuvette mode. One is able to register polarization changes with time and so allows for kinetic measurements another one is hand-held. We have been comparing FPIA formats before [1-4] and now a comprehensive view on sensitivities, the importance of fast vs. slow binding kinetics as well as the choice of format can be presented.
The Short Course “Immunoanalytical Methods for Environmental, Food and Clinical Analysis” offers training in antibody-based analytical techniques. The course is suitable also for beginners. The Short Course comprises Lecture Units teaching the concepts, equipment, reagents and explains the protocols to be used in the practical part. Simple “Hands On” units are offered employing portable instrumentation. – The Short Course spans from antigen production, generation of antibodies, assay development and optimization, data evaluation to the different formats that have been developed. Examples are provided from the areas of environmental analysis (pharmaceuticals, hormones and anthropogenic markers in water and wastewater), food analysis (caffeine in beverages, mycotoxins) and clinical diagnostics (infarction biomarkers). The attendants will be enabled to select an appropriate method and to judge its applicability for their given analytical problem.
The neutron time-of-flight spectrometer NEAT has a long history of successful applications and is best suited to probe dynamic phenomena directly in the large time domain 10(-14) - 10(-10) s and on the length scale ranging from 0.05 to up to about 5 nm. To address user community needs for more powerful instrumental capabilities, a concept of the full upgrade of NEAT has been proposed. The upgrade started in 2010 after a rigorous internal and external selection process and resulted in 300-fold neutron count rate increase compared to NEAT01995. Combined with new instrumental and sample environmental capabilities the upgrade allows NEAT to maintain itself at the best world class level and provide an outstanding experimental tool for a broad range of scientific applications. The advanced features of the new instrument include an integrated guide-chopper system that delivers neutrons with flexible beam properties: either highly homogeneous beam with low divergence suitable for single crystals studies or "hot-spot" neutron distribution serving best small samples. Substantial increase of the detector angle coverage is achieved by using 416 He-3 position sensitive detectors. Placed at 3m from the sample, the detectors cover 20m(2) area and are equipped with modern electronics and DAQ using event recording techniques. The installation of hardware has been completed in June 2016 and on January 23, 2017 NEAT has welcomed its first regular users who took advantage of the high counting rate, broad available range of incoming neutron wavelengths and high flexibility of NEAT. Here we present details of NEAT upgrade, measured instrument characteristics and show first experimental results.
In der vorliegenden Dissertation wird die Verbesserung von Gassensoren durch Beschichtung mit dotierten Zinnoxidschichten untersucht, wobei zur Messung der Gase die Methode der oberflächenplasmonenresonanzverstärkten Ellipsometrie (SPREE) angewendet wurde. Die vorgestellten Ergebnisse unterteilen sich dabei in drei Schritte: Herstellung der Schichtsysteme, Analyse der chemischen, strukturellen und optischen Eigenschaften, sowie die Anwendung in der SPREE Gasmessung. Die dotierten Zinnoxidschichten wurden erfolgreich mittels Hochfrequenz-Magnetronsputtern hergestellt, indem das Zinnoxidtarget mit dem metallischen Dotierungsmaterial (Eisen bzw. Nickel) modifiziert wurde. Die chemische Analyse der Schichten wurde mit energiedispersiver Röntgenspektroskopie (EDX), Flugzeit-Sekundärionenmassenspektrometrie (TOF-SIMS) und Röntgenfluoreszenz unter streifendem Einfall (GI-XRF) durchgeführt. Die EDX Untersuchungen zeigten qualitativ, dass das Dotierungsmaterial in die Schicht eingebaut wurde. Mithilfe der TOF-SIMS Experimente konnte nachgewiesen werden, dass die Dotierungskonzentration innerhalb der Schicht heterogen verteilt ist und mithilfe der GI-XRF Messung konnte der Dotierungsgrad quantitativ mit ca. 10% bestimmt werden. Für die strukturelle Untersuchung wurden die Methoden der Rasterkraftmikroskopie (AFM) und Transmissionselektronenmikroskopie (TEM) ausgewählt. Die AFM Messungen zeigten, dass die Schichten eine mittlere quadratische Rauheit kleiner als 1 nm aufweisen und die Rauheit damit nicht als Faktor in der Gasmessung berücksichtigt werden muss. In den TEM Messungen wurde der Schichtaufbau bestätigt und gezeigt, dass in den dotierten Schichten nanokristalline Strukturen vorliegen. Die optische Charakterisierung der Schichten wurde mit spektraler Ellipsometrie (SE) durchgeführt, um die dielektrische Funktion in Abhängigkeit der Dotierung zu untersuchen. Dafür wurden Modelle für die dielektrische Funktion auf der Basis von mehreren Gauss-Funktionen entwickelt. Es zeigte sich, dass die undotierten Schichten sich wie typische Dielektrika mit Bandkanten >4 eV verhält und mit drei Gauss-Funktionen simuliert werden kann. Für die dotierten Schichten verschiebt sich die Bandkante, in Abhängigkeit vom Grad der Dotierung und dem Oxidationsgrad, zu bis zu 2.1 eV. Außerdem muss das Modell um eine zusätzliche Gauss-Funktion im nahen Infrarot erweitert werden, die auf die Anwesenheit von metallischen Nanopartikeln zurückzuführen ist. Weiterhin zeigte sich, dass die dielektrischen Eigenschaften von der Dicke der Schicht abhängen. Die Benutzung der Zusatzschichten in der SPREE Gasmessung zeigte, dass diese Schichten die Sensoroberfläche effektiv vor Degradation schützt. Weiterhin wurde nachgewiesen, dass die Sensitivität der jeweiligen Sensorschicht für bestimmte Gase von der Dotierung der Schicht abhängt. Es wurde gezeigt, dass eine Eisendotierung zu einer erhöhten Sensitivität für Kohlenmonoxid führt, während undotierte Schichten vor allem unpolare Alkane bevorzugen. Die Nickel-dotierten Schichten zeigten im Vergleich zur Eisendotierung deutlich schlechtere Ergebnisse für alle Gase. Diese Effekte wurden auf die unterschiedliche Bindungsstärke der Gase an die metallischen Nanopartikel und das Vorhandensein einer unterschiedlichen Zahl an Adsorptionsplätzen zurückgeführt. Für Wasserstoff wurden für alle Proben vergleichbare Ergebnisse gefunden, was darauf zurückzuführen ist, dass diese Moleküle aufgrund der geringen Größe und Masse in die Schicht diffundieren. Zusätzlich wurde das SPREE Verfahren signifikant verbessert, indem die Druckabhängigkeit Sensoren erstmals erfasst wurde. Weiterhin wurde die Auswertung weiterentwickelt, indem nur einzelne Parameter des Stokes-Vektors für die Gasmessung benutzt wurden.
Additive Manufacturing provides an important enabling technology for the digital transformation of the economy. As an emerging technology it has seen a remarkable development over the last three decades. Nevertheless, it is far from a broad adoption with several barriers to overcome yet. One of the major challenges is the lack of standards. The critical role of standardization for innovation is generally recognized, still the topic too often has been neglected in strategic roadmapping exercises for emerging technologies. Too little is known about the complex dynamics and interrelations of standardization and innovation. The anticipation of standardization needs and the timely and efficient implementation of standards is challenging. This paper aims at contributing to a better understanding of the role that standards play in the multi-dimensional system of innovation. It analyzes the trajectories of innovation in Additive Manufacturing in a systematic and holistic way, focusing on standardization activities with regard to coordination, stakeholders involved, the timing and types of standards developed. Putting standardization in context of the multi-dimensional innovation system of Additive Manufacturing the research shows where standards can support the diffusion of an emerging technology.
Over the last decade nanoparticles are progressively included in products of our daily life. Due to their antimicrobial properties, silver nanoparticles are used in a high variety of consumer products ranging from food containers over medicine and textiles. Therefore, research on the toxicological potential of nanosilver becomes increasingly important. This includes investigations concerning uptake, distribution and excretion of the particles. However, little attention was paid to changes of physical and chemical properties of the particles in the human body. One of the most important questions is if the particles can pass the digestion process without altering their shape and size. In this study we report on a versatile system of ultra-small silver nanoparticles with a mean volume weighted radius of 3.1 nm and a narrow size distribution width of 20%. The nanoparticles’ coating of poly (acrylic acid) can easily be exchanged by biocompatible ligands like albumin or glutathione. The particles are thoroughly characterized by small angle X-ray scattering (SAXS), DLS, IR and UV/Vis spectroscopy. We used the particles in an artificial digestion procedure which mimics the gastro-intestinal passage (Figure 1). Thereby the changes in the size distribution during the digestion process were analytically monitored by SAXS. Additionally, we used as food components oil, starch, skimmed milk powder and mixture thereof to provide a preferably realistic environment. Large aggregates of up to 56 nm were formed in the absence of food additives. In contrast, the presence of oil and starch limit the radii of aggregates to about 10 nm. Milk powder shows strong protective properties resulting in only small aggregates of 6 nm radii. Our results indicate that silver can indeed pass the digestion process in a nanoscale form depending on the nanoparticle coating and additional ingredients. These results have an impact on future toxicological considerations regarding silver nanoparticle-containing consumer products.