Analytische Chemie
Filtern
Dokumenttyp
- Posterpräsentation (11) (entfernen)
Referierte Publikation
- nein (11)
Schlagworte
- Bridge monitoring (3)
- Ultrasound (3)
- Coda wave interferometry (2)
- Concrete (2)
- Elastic wave velocity (2)
- Ultraschall (2)
- Ablaufdiagramme (1)
- Ambient noise (1)
- Beton (1)
- Beton Ultraschall Monitoring (1)
Organisationseinheit der BAM
The evaluation of technical components and materials in terms of condition and quality with the aid of non-destructive testing methods plays an outstanding role both in industrial serial production and in the individual assessment of components. The ultrasonic echo method is used for a wide variety of testing tasks, such as measuring the thickness of a component. At the Bundesanstalt für Materialforschung und -prüfung (BAM) in Berlin, test methods are developed and their performance is demonstrated. For this purpose, references such as materials, test procedures or data sets are generated, which are used to evaluate these developed test methods. An important component of these references are data sets that are created according to the BAM Data Policy and made available to the scientific community and users of test methods in practice on the basis of the FAIR principles (Findability, Accessibility, Interoperability, and Reuse).
Zu jedem Endlager gehört die Entwicklung eines Verschlusskonzept. Im Endlager Morsleben und an anderer Stelle werden in Abhängigkeit vom Wirtsgestein verschiedene Materialien und Bauweisen für Streckenverschlüsse entwickelt und in großem Maßstab erprobt. Hierzu gehören auch Maßnahmen der Qualitätssicherung, die Informationen über Ausführung und Zustand der Versuchsbauwerke liefern. Hierzu werden von der Bundesanstalt für Materialforschung und -prüfung (BAM) für verschiedene Forschungsvorhaben und Prüfaufträge Methoden und Geräte getestet, verbessert und vor Ort unter Tage eingesetzt Die hier beschriebenen Verfahren lassen sich auch zu Untersuchungen im Wirtsgestein anwenden.
Previous work has shown that ultrasonic monitoring using externally applied or embedded transducers and imaging methods based on coda wave interferometry are able to detect subtle changes in concrete elements. In this study, a limited number of embedded transducers has been used to monitor changes in several 12 m long two-span concrete beams subjected to point or linear loads until failure.
The ultrasonic results showed the high sensitivity to stress changes and the nonlinear character of the associated effects. However, the ultrasonic features showed a very good correlation to several conventional monitoring parameters. For higher loads (significant amount of cracking), the technique had to be modified to cope with large wave velocity variations and high decorrelation compared to the reference signal.
Using a very simple imaging procedure, the 2D stress field inside the beam has been visualized including inhomogeneities and artifact at places where cracking occurred at higher loads. The technique has the potential to be included in real time monitoring systems.
Bridge monitoring using embedded ultrasonics First results from the BLEIB reference structure
(2017)
The BLEIB reference structure The structure is a two-span, 24 m long inverse u-shaped post-tensioned concrete beam. Fibre optic sensing cables, RFID sensors and ultrasonic transducers are permanently embedded. Other sensing techniques (vibrational, optical, ultrasonic, mechanical) are applied externally. Tension can be adjusted. Loads can be placed at arbitrary locations. Limited damage is introduced to one span. The BLEIB reference structure is located at BAM‘s test site in Horstwalde, south of Berlin. Ultrasonic transducer before concreting.
Embedded ultrasonic transducers 14 piezo transducers have been embedded before concreting. They are located in five sections, two close to the centers of both spans respectively and one above the central bearing.
Load experiment and data evaluation In a first experiment load 2 (weight 2 t) was moved three times along the southern (right) span. The tension forces were modified as well.
Ultrasonic transmission measurements were repeated over time and evaluated using Coda Wave Interferomerry (CWI), which determines correlation coefficients and relative velocity changes as subtle indicators for loads and other changes in the material.
Seismic wave velocities are related to elastic moduli and other properties and can serve as indicators for changes in the material. They are conventionally determined by active measurements. Using ideas from seismic interferometry determination from stacked cross-correlations of registrations of man-made and natural noise (“passive seimics“) is an effective alternative, as these data might be available from vibration monitoring anyway. The validity of this approach is demonstrated by a simple experiment based on recordings of man made noise using accelerometers at the reference structure. The s-wave (or more probable. guided wave) velocity was determined to be 2100 m/s in both active and passive experiments.
Seismic wave velocities are related to elastic moduli and other properties and can serve as indicators for changes in the material. They are conventionally determined by active measurements. Using ideas from seismic interferometry Determination from stacked cross-correlations of registrations of man- made and natural noise (“passive seimics“) is an effective alternative, as these data might be available from vibration monitoring anyway. The validity of this approach is demonstrated by a simple experiment based on recordings of man made noise using accelerometers at the reference structure. The s-wave (or more probable. guided wave) velocity was determined to be 2100 m/s in both active and passive experiments.
Das Ultraschall-Echo-Verfahren ist eine wichtige Methode der zerstörungsfreien Prüfung (ZfP). Prüfaufgaben im Bauwesen beinhalten unter anderem die korrekte Dickenbestimmung von Konstruktionen, sowie die Lokalisierung von Einbauteilen und Fehlstellen. Das Abbildungsverfahren RTM (Reverse Time Migration) liefert oft bessere Bilder als konventionelle Verfahren. Die Datenaufnahme am Betonprobekörper erfolgte mit einem Scannersystem der BAM, bei dem jeweils ein Ultraschall-Prüfkopf als Sender bzw. Empfänger diente. Es wurden senkrecht zur Profilrichtung horizontal polarisierte Scherwellen genutzt. Die RTM wurde mit dem Softwarepaket Madagascar gerechnet.
Die Ergebnis zeigt das Potential dieser Methode im Bezug auf komplexe Strukturen. Die lateralen Positionen der Risse im RTM-Bild sowie deren Höhe innerhalb des Probekörpers, entsprechen recht genau dem visuellen Befund.
Die Coda transmittierter Ultraschallsignale in Beton enthält Informationen zu Struktur und Zustand des Materials bzw. deren Änderung. Relevant sind u. a. Temperatur, Stress, Feuchtigkeit und verschiedene Schädigungsmechanismen. Die zahlreichen Einflussfaktoren sind nur schwer zu trennen und die Messeffekte oft zu Beginn sehr klein.Die CWI ermöglicht die Detektion kleinster Geschwindigkeitsveränderungen durch den Vergleich, der in kleinen Schritten gestauchten oder gestreckten Signalen mit eine Referenzmessung. Andere Indikatoren für Änderungen im Material sind:
• Kreuzkorrelation
• Laufzeit direkte Welle
• Energie/Amplitude
• Änderungen im Frequenzspektrum
Die beschriebene Technik wird von uns bisher primär in klein- und großskaligen Laborversuchen genutzt. Die Forschung konzentriert sich auf die Untersuchung und Trennung verschiedener Einflusseffekte. Aber auch erste reale Bauwerke wurden schon instrumentiert, z. B. Brücken und eine Tunneldecke.
Vor einer geplanten Weiter- oder Wiedernutzung von Bestandsfundamenten stellt sich die Frage nach deren Lage, Geometrie und Zustand im Untergrund. Hierfür gibt es verschiedene Prüfverfahren. Im Projekt REFUND (2014-2016) wurden unter Berücksichtigung der aktuellen Normen und des Standes der Technik Ablaufdiagramme für die Planung der Wiedernutzung und die Untersuchung des Bestandes entwickelt. Dies geschah getrennt für Einzel- und Streifenfundamente, Platten und Pfähle. An zwei Praxisbeispielen wurden die Abläufe getestet und optimiert. Die Ergebnisse wurden in einem Handbuch kompiliert, das bei der TU Darmstadt erscheint.