Analytische Chemie
Filtern
Erscheinungsjahr
- 2022 (60) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (49)
- Beitrag zu einem Tagungsband (10)
- Sonstiges (1)
Sprache
- Englisch (60)
Referierte Publikation
- ja (60) (entfernen)
Schlagworte
- Ultrasound (8)
- Non-destructive testing (7)
- Air-coupled ultrasound (4)
- Thermography (4)
- Computed tomography (3)
- Concrete (3)
- Machine learning (3)
- NDT (3)
- Structural health monitoring (3)
- Aerial robot (2)
- Chemometric techniques (2)
- Coda Wave Interferometry (CWI) (2)
- Defect reconstruction (2)
- Electronic nose (2)
- Fiber orientation (2)
- Fluidics (2)
- Internal defects (2)
- Neural network (2)
- Open Guided Waves Platform (2)
- Simultaneous temperature and humidity sensing (2)
- Structural Health Monitoring (2)
- Super resolution (2)
- Synchrotron radiation (2)
- Ultrasonic Guided Waves (2)
- Ultrasonic testing (2)
- Ultrasonics (2)
- X-ray computed tomography (2)
- X-ray refraction (2)
- Փ-OTDR (2)
- 2101 duplex stainless steel (1)
- Acoustic Damping (1)
- Acoustical damping (1)
- Acousto-optic effect (1)
- Active thermal imaging (1)
- Additive manufacturing (1)
- Aeroacoustics (1)
- Analyzer-Based Imaging (1)
- Angle wedge (1)
- Anosteocytic bone (1)
- Artificial Neural Network (1)
- Artificial neural networks (1)
- Automotive industry (1)
- BOFDA (1)
- Bandgap quenching (1)
- Block-sparsity (1)
- Boltzmann plot (1)
- Bone porosity (1)
- Borehole (1)
- Bound water (1)
- Brillouin distributed sensing (1)
- Building materials (1)
- C-OTDR (1)
- Calcium carbide method (1)
- Carbon fibre-reinforced plastic (1)
- Chemisorption (1)
- Civil engineering (1)
- Coda wave interferometry (1)
- Composite panel (1)
- Composite structures (1)
- Composites (1)
- Condensed Matter Physics (1)
- Contact area (1)
- Corrosion (1)
- DLP (1)
- DMD (1)
- Damage detection (1)
- Darr method (1)
- Data fusion (1)
- Data infrastructures (1)
- Debye–Waller factor (1)
- Deep Learning (1)
- Deep unfolding (1)
- Delamination depth (1)
- Delamination width (1)
- Diffraction Enhanced Imaging (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dimensional metrology (1)
- Distributed Brillouin sensing (1)
- Distributed fiber optic sensing (1)
- Distributed vibration sensing (1)
- Double-multilayer monochromators (1)
- Eddy current testing (1)
- Elastic net (1)
- Electronic, optical and magnetic materials (1)
- Embedded Sensors (1)
- Entropy noise (1)
- Environmental analysis (1)
- Fiber optics sensors (1)
- Finite Element Method (1)
- Finite Volume Method (1)
- Finite-element analysis (1)
- Flexible Magnetic Sensors (1)
- Fluidic oscillators (1)
- Frequency Drift (1)
- Frequency modulation (1)
- Functional Materials (1)
- Gas Distribution Mapping (1)
- Gas sensing (1)
- Gas tomography (1)
- General Materials Science (1)
- General energy (1)
- Geometric phase measurement (1)
- Geometrical deviation (1)
- Geometrical magnification (1)
- Geosciences (1)
- Giant magneto resistance (GMR) (1)
- High temperature (1)
- Hilbert transform (1)
- Humidity sensing (1)
- Hydration (1)
- Hydrogen embrittlement (1)
- Ideal delamination (1)
- Illuminance (1)
- Impact damage (1)
- In Memoriam (1)
- In-air ranging (1)
- Indirect combustion noise (1)
- Industrial CT (1)
- Inspection (1)
- Inter-robot measurements (1)
- Interlayer delay (1)
- Interpretable machine learning (1)
- Inverse problems (1)
- Iterative shrinkage thresholding (1)
- Knowledge graphs (1)
- LSFD (1)
- Lamb waves (1)
- Laser (1)
- Laser Doppler vibrometer (1)
- Laser induced plasma (1)
- Laser powder bed fusion (1)
- Laser thermography (1)
- Liner (1)
- Localization (1)
- MATLAB (1)
- MIMO (1)
- Magnetic Methods (1)
- Magnetic stray field (1)
- Material moisture (1)
- Material testing (1)
- Materials Characterization (1)
- Materials analysis (1)
- Materials informatics (1)
- Measurement uncertainty (1)
- Mechanical Engineering (1)
- Mechanical Load (1)
- Mechanical waves (1)
- Mechanics of Materials (1)
- Metal oxide semiconductor (1)
- Metals and Alloys (1)
- Metamaterial (1)
- Micro-computed tomography (1)
- Microcracking (1)
- Microstructure (1)
- Modulated photothermal radiometry (1)
- Neutron Bragg edge imaging (1)
- Neutron diffraction (1)
- Neutron imaging (1)
- Neutron tomography (1)
- Newton Raphson method (1)
- Nitinol (1)
- Non-Destructive Evaluation (1)
- Non-destructive Testing (1)
- Non-destructive evaluation (1)
- Non-linear finite element modelling (1)
- Nondestructive evaluation (1)
- Nondestructive testing (NDT) (1)
- Nondestructive testing techniques (1)
- Nuclear magnetic resonance (1)
- Numerical Methods (1)
- Obituary (1)
- Ontologies (1)
- Open data (1)
- Optimization (1)
- Oven drying (1)
- Performance assessment (1)
- Phased array (1)
- Photothermal imaging (1)
- Physical and theoretical chemistry (1)
- Physisorption (1)
- Pink beams (1)
- Plume (1)
- Printed Electronics (1)
- Probability of Detection (1)
- Probability of detection (1)
- Process monitoring (1)
- Proteoglycans (1)
- Pseudo-Voigt fit function (1)
- Pulse compression (1)
- Pulse-echo method (1)
- Python (1)
- Radiography (1)
- Reconstruction algorithm (1)
- Reference material (1)
- Refracto-vibrometry (1)
- Regularization (1)
- Reinforced Concrete (1)
- Reliability (1)
- Residual Stress (1)
- Residual stress (1)
- Resolution (1)
- Roll-to-Roll Processing (1)
- Scanning laser Doppler vibrometry (1)
- Scintillator (1)
- Sensor Network (1)
- Shape memory alloy (1)
- Signal processing (1)
- Simulation (1)
- Single-sided NMR (1)
- Sonic crystal (1)
- Spatial Interpolation (1)
- Spectral induced polarization (1)
- Steel fiber reinforced concrete (1)
- Steel fiber reiniforced concrete (1)
- Super martensitic stainless steel (1)
- Super resolution (SR) (1)
- Super-Resolution (1)
- Surfaces, coatings and films (1)
- Swirl (1)
- Symbolic computation (1)
- Synchrotron X-ray diffraction (1)
- TDLAS (1)
- TIG welding (1)
- Temperature-dependent neutron transmission (1)
- Thermography Computed (1)
- Time-of-flight measurements (1)
- Tomography (1)
- Trail detection (1)
- Trail following (1)
- Ultra-high performance concrete (1)
- Ultrasonic probe (1)
- Uncertainty estimation (1)
- Upscaling (1)
- Validation (1)
- Variational Calculation (1)
- Virtual CT (1)
- Visual inspection (1)
- Vocabulary providers (1)
- Voltammetric electronic tongue (1)
- Vorticity noise (1)
- Voxel size (1)
- Wastewater (1)
- Water permeability (1)
- Water quality control (1)
- Wire are additive manufacturing (1)
- X-ray optics (1)
- Zero Massflow Liner (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (60) (entfernen)
A semi-automatic thermographic procedure for the assessment of the welded area of resistance projection welded joints has been developed. Currently, to assess the quality of RPW joints destructive tests are used and the more commonly used non-destructive technique is the ultrasonic one. The possibility for a quantitative evaluation of the welded area by thermographic technique has been proved by means of an innovative procedure applied on steel RPW joints with ‘as it’ surface conditions. Measurements obtained by thermography and ultrasound have been compared, to verify the developed procedure.
Manufacturing austenitic stainless steels (ASSs) using additive manufacturing is of great interest for cryogenic applications. Here, the mechanical and microstructural responses of a 316L ASS built by laser powder bed fusion were revealed by performing in situ neutron diffraction tensile tests at the low-temperature range (from 373 to 10 K). The stacking fault energy almost linearly decreased from 29.2 ± 3.1 mJm⁻² at 373 K to 7.5 ± 1.7 mJm⁻² at 10 K, with a slope of 0.06 mJm⁻²K⁻¹, leading to the transition of the dominant deformation mechanism from strain-induced twinning to martensite formation. As a result, excellent combinations of strength and ductility were achieved at the low-temperature range.
Many advanced materials consist of fibers. They are used as nonwovens, fabrics, or in composite materials. Characterization of individual fibers allows us to predict resulting material properties. We present a measurement setup and analysis software to characterize individual, micrometer-sized fibers fast and reliably. The setup is based on the lock-in thermography principle. Thermal diffusivity values of seven reference samples agree very well with previously reported values. We use our setup to investigate critical measurement parameters like excitation frequency, excitation power, pixel size, and fiber orientation. Our results show that fibers with subpixel diameters can be measured even if they are not aligned. However, special care has to be taken to choose an adequate excitation power. Measurements at high intensities can underestimate thermal diffusivity even though the raw data looks reasonable. By automatically measuring at different excitation powers, our setup solves this issue.
The aim of this work is to achieve reliable nondestructive evaluation (NDE) of adhesively bonded aerospace components by developing novel multidimensional data fusion techniques, which would combine the information obtained by ultrasonic and X-ray NDE methods. Separately, both NDE techniques have their advantages and limitations. The integration of data obtained from pulse echo immersion ultrasound testing and radiography holds immense potential to help improve the reliability of non-destructive evaluation. In this study, distinctive features obtained from single techniques, traditional ultrasonic pulse echo testing, and radiography, as well as fused images, were investigated and the suitability of these distinctive features and fusion techniques for improving the probability of defect detection was evaluated. For this purpose, aluminum single lap joints with brass inclusions were analyzed using ultrasound pulse echo and radiography techniques. The distinctive features were extracted from the data obtained, and images of features obtained by both techniques were fused together. Different combinations of features and fusion algorithms were investigated, considering the desire to automate data evaluation in the future.
This work focuses on the design and fabrication of low-cost and fast-response of an electronic nose (E-nose) based on semiconductor gas sensors, for discriminating some synthetic gases such as ammonia (NH3), ethanol (C2H5OH), and hydrogen sulfide (H2S). Additionally, the capability of separating different concentration levels of each considered gases was checked. Dataset treatment of E-nose by using Principal Component Analysis (PCA) showed a good discrimination of the different synthetic gases. Furthermore, perfect classification was reached of different concentration levels of the analysed gases by using Discriminant Function Analysis (DFA). In the light of these results, it could be stated that the developed E-nose system constitutes an inexpensive, rapid, simple to use, and efficient tool for synthetic gases detection.
Validation of novel ultrasonic phased array borehole probe by using simulation and measurement
(2022)
Low-frequency ultrasonic testing is a well-established non-destructive testing (NDT) method in civil engineering for material characterization and the localization of cracks, reinforcing bars and delamination. A novel ultrasonic borehole probe is developed for in situ quality assurance of sealing structures in radioactive waste repositories using existing research boreholes. The aim is to examine the sealing structures made of salt concrete for any possible cracks and delamination and to localize built-in components. A prototype has been developed using 12 individual horizontal dry point contact (DPC) shear wave transducers separated by equidistant transmitter/receiver arrays. The probe is equipped with a commercially available portable ultrasonic flaw detector used in the NDT civil engineering industry. To increase the sound pressure generated, the number of transducers in the novel probe is increased to 32 transducers. In addition, the timed excitation of each transducer directs a focused beam of sound to a specific angle and distance based on the previously calculated delay time. This narrows the sensitivity of test volume and improves the signal-to-noise ratio of the received signals. In this paper, the newly designed phased array borehole probe is validated by beam computation in the CIVA software and experimental investigations on a half-cylindrical test specimen to investigate the directional characteristics. In combination with geophysical reconstruction methods, it is expected that an optimised radiation pattern of the probe will improve the signal quality and thus increase the reliability of the imaging results. This is an important consideration for the construction of safe sealing structures for the safe disposal of radioactive or toxic waste.
This paper considers an indirect measurement approach to reconstruct a defect in a two-dimensional waveguide model for a non-destructive ultrasonic inspection via derivative-based optimization. The propagation of the mechanical waves is simulated by the scaled boundary finite element method that builds on a semi-analytical approach. The simulated data are then fitted to given data associated with the reflected waves from a defect which is to be reconstructed. For this purpose, we apply an iteratively regularized Gauss-Newton method in combination with algorithmic differentiation to provide the required derivative information accurately and efficiently. We present numerical results for three kinds of defects, namely, a crack, delamination, and corrosion. The objective function and the properties of the reconstruction method are investigated. The examples show that the parameterization of the defect can be reconstructed efficiently as well as robustly in the presence of noise.
Vertebrate bones are made of a nanocomposite consisting of water, mineral and organics. Water helps bone material withstand mechanical stress and participates in sensation of external loads. Water diffusion across vertebrae of medaka (bone material lacking osteocytes) and zebrafish (bone material containing osteocytes) was compared using neutron tomography. Samples were measured both wet and following immersion in deuterated-water (D2O). By quantifying H+ exchange and mutual alignment with X-ray lCT scans, the amount of water expelled from complete vertebra was determined. The findings revealed that anosteocytic bone material is almost twice as amenable to D2O diffusion and H2O exchange, and that unexpectedly, far more water is retained in osteocytic zebrafish bone. Diffusion in osteocytic bones (only 33 % – 39 % water expelled) is therefore restricted as compared to anosteocytic bone (~ 60 % of water expelled), presumably because water flow is confined to the lacunar-canalicular network (LCN) open-pore system. Histology and Raman spectroscopy showed that anosteocytic bone contains less proteoglycans than osteocytic bone. These findings identify a previously unknown functional difference between the two bone materials. Therefore, this study proposes that osteocytic bone retains water, aided by non-collagenous proteins, which contribute to its poroelastic mechano-transduction of water flow confined inside the LCN porosity.
Hydration is the exothermic reaction between anhydrous cement and water, which forms the solid cement matrix of concrete. Being able to evaluate the hydration is of high interest for the use of both conventional and more climate-friendly building materials. The experimental monitoring is based on temperature or moisture measurements. The first needs adiabatic conditions, which can only be achieved in laboratory. The latter is often measured comparing the weight of the material sample before and after oven drying, which is time-consuming. This study investigates the moisture content of two cement-based and two calcium sulphate based mixtures for the first 90 days by using the calcium carbide method and oven drying at 40 °C and 105 °C (Darr method). Thereby, the amount of chemically bound water is determined to derive the degree of hydration. The calcium carbide measurements highly coincide with oven drying at 40 °C. The calcium carbide method is therefore evaluated as a suitable alternative to the time-consuming Darr drying. The prompt results are seen as a remarkable advantage and can be obtained easily in laboratory as well as in the field.
In this study, the concept of a zero mass flow liner is evaluated. The concept enables impedance control by theinduction of, acoustically actuated, periodic bias flowthrough the facing sheet of the liner. Bymeans of the periodic bias flow, the impedance of the liner is adapted to different grazing flowconditions.The equivalent fluid impedancemodel for perforated plates is modified to account for the effects of periodic bias and grazing flow. A generally applicable optimization routine, using the impedance of the lined surface as a boundary condition in a numeric calculation, is implemented. Based on the results of the optimization, a zero mass flow liner is manufactured and evaluated experimentally. The damping characteristics are assessed in the form of dissipated energy along the lined surface.
Prediction and measurements show reasonable agreement. The zero mass flow liner delivers broadband dissipation of high peak value over a range of grazing flow Mach numbers. Under grazing flow, the effect of periodic bias flow is reduced. For a ratio of grazing to bias flow velocities larger than five, no appreciable effect is found. This poses considerable energy requirements on the actuation source for the application in high-Mach-number flow regimes.