Analytische Chemie
Filtern
Dokumenttyp
- Vortrag (2)
- Zeitschriftenartikel (1)
- Sonstiges (1)
Schlagworte
- LFIA (4) (entfernen)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (2)
The Short Course “Immunoanalytical Methods for Environmental, Food and Clinical Analysis” offers training in antibody-based analytical techniques. The course is suitable also for beginners. The Short Course comprises Lecture Units teaching the concepts, equipment, reagents and explains the protocols to be used in the practical part. Simple “Hands On” units are offered employing portable instrumentation. – The Short Course spans from antigen production, generation of antibodies, assay development and optimization, data evaluation to the different formats that have been developed. Examples are provided from the areas of environmental analysis (pharmaceuticals, hormones and anthropogenic markers in water and wastewater), food analysis (caffeine in beverages, mycotoxins) and clinical diagnostics (infarction biomarkers). The attendants will be enabled to select an appropriate method and to judge its applicability for their given analytical problem.
One of the most important chemicals used in the production of polymer plastics and coatings is bisphenol A. However, despite the large number of studies on the toxicity and hormonal activity of BPA, there are still open questions and thus considerable media attention regarding BPA toxicity. Hence, it is necessary to develop a sensitive, simple, cost-efficient, specific, portable, and rapid method for monitoring bisphenol A and for high sample throughput and on-site screening analysis. Lateral flow immunoassays have potential as rapid tests for on-site screening. To meet sensitivity criteria, they must be carefully optimized. A latex microparticle-based LFIA for detection of BPA was developed. The sensitivity of the assay was improved by non-contact printing of spot grids as the control and test lines with careful parameter optimization. Results of the test could be visually evaluated within 10 min with a visual cut-off of 10 µg/L (vLOD). Alternatively, photographs were taken, and image analysis performed to set up a calibration, which allowed for a calculated limit of detection (cLOD) of 0.14 µg/L. The method was validated for thermal paper samples against ELISA and LC–MS/MS as reference methods, showing good agreement with both methods