Additive Fertigung
Filtern
Dokumenttyp
- Vortrag (218)
- Zeitschriftenartikel (187)
- Posterpräsentation (65)
- Beitrag zu einem Tagungsband (39)
- Forschungsdatensatz (9)
- Buchkapitel (3)
- Dissertation (3)
- Sonstiges (2)
Sprache
- Englisch (526) (entfernen)
Schlagworte
- Additive manufacturing (188)
- Additive Manufacturing (141)
- Laser powder bed fusion (49)
- Residual stress (49)
- Thermography (46)
- Computed tomography (28)
- Laser Powder Bed Fusion (22)
- Microstructure (22)
- 316L (20)
- Ti-6Al-4V (20)
- Process monitoring (19)
- L-PBF (18)
- Laser metal deposition (18)
- Neutron diffraction (16)
- 3D printing (14)
- Computed Tomography (14)
- X-ray computed tomography (14)
- AGIL (13)
- Inconel 718 (13)
- Residual Stress (13)
- Selective laser melting (13)
- Additive Fertigung (12)
- Diffraction (12)
- Porosity (11)
- AlSi10Mg (10)
- Ceramic (10)
- Infrared thermography (10)
- In-situ monitoring (9)
- Laser beam melting (9)
- Residual stresses (9)
- AISI 316L (8)
- Ceramics (8)
- Crystal plasticity (8)
- Fatigue (8)
- Heat treatment (8)
- Laser Metal Deposition (8)
- Metrology (8)
- PBF-LB/M (8)
- SLM (8)
- Selective Laser Melting (8)
- AM (7)
- Additive manufacturing (AM) (7)
- Anisotropy (7)
- DED (7)
- Defect detection (7)
- LMD (7)
- Layerwise slurry deposition (7)
- Neutron Diffraction (7)
- Residual Stresses (7)
- Selective Laser Melting (SLM) (7)
- Synchrotron X-ray diffraction (7)
- Creep (6)
- Heat accumulation (6)
- IN718 (6)
- In situ monitoring (6)
- LPBF (6)
- Laser Powder Bed Fusion (L-PBF) (6)
- Mechanical properties (6)
- Open science (6)
- Optical tomography (6)
- Powder (6)
- Research data management (6)
- X-ray diffraction (6)
- 3D-printing (5)
- Additive Manufacturing (AM) (5)
- Advanced manufacturing (5)
- Arc welding (5)
- Binder Jetting (5)
- Cyclic R-curve (5)
- Fatigue crack growth (5)
- Hochfester Stahl (5)
- Laser beam welding (5)
- Machine Learning (5)
- Micropatterning (5)
- Multiphoton lithography (5)
- Polydopamine (5)
- ProMoAM (5)
- Quality assurance (5)
- Residual stress analysis (5)
- Selective laser melting (SLM) (5)
- Sintering (5)
- Slurry (5)
- Texture (5)
- Ultrafine particles (5)
- WAAM (5)
- WelDX (5)
- 3D-Printing (4)
- Cold cracking safety (4)
- Defects (4)
- Direct energy deposition (4)
- Directed Energy Deposition (4)
- Eigenspannungen (4)
- Elastic modulus (4)
- Heat control (4)
- In-situ Monitoring (4)
- In-space manufacturing (4)
- Inter layer time (4)
- Lattice structures (4)
- Mechanical behavior (4)
- Metals (4)
- Microgravity (4)
- Position detection (4)
- Scale-bridging (4)
- Shear modulus (4)
- Simulation (4)
- Strategic Research Agenda (SRA) (4)
- Virtual experiments (4)
- Welding (4)
- Wind energy (4)
- X-ray refraction (4)
- Young's modulus (4)
- Advanced ceramics (3)
- AlSi10Mg alloy (3)
- Alumina (3)
- Artificial neural network (3)
- BAMline (3)
- Binder jetting (3)
- Component assessment (3)
- Composites (3)
- Convolutional Neural Networks (3)
- Crack propagation (3)
- Creep behavior (3)
- Cyclic R-Curve (3)
- DED-Arc (3)
- Data fusion (3)
- Digitalization (3)
- Dimensional accuracy (3)
- Direct laser writing (3)
- Directed energy deposition (3)
- Electron beam melting (3)
- European Metrology Network (EMN) (3)
- FEM (3)
- GMR (3)
- Heat Treatment (3)
- High-strength Steels (3)
- High-strength steel (3)
- Hybrid components (3)
- Hybrid repair (3)
- Hydrogen (3)
- ISRU (3)
- Implants (3)
- Interpenetrating polymer network (3)
- Laser (3)
- Laser Beam Melting (3)
- Laser Welding (3)
- Laser beam melting (LBM) (3)
- Laser powder bed fusion (L-PBF) (3)
- Laser welding (3)
- Lattice structure (3)
- Layerwise Slurry Deposition (3)
- Low Cycle Fatigue (3)
- MAG-Schweißen (3)
- Material Science (3)
- Mechanical Engineering (3)
- Multispectral thermography (3)
- Non-destructive testing (3)
- Online Process Monitoring (3)
- Optical Tomography (3)
- Process Monitoring (3)
- Resistance spot welding (3)
- Review (3)
- Scaffold (3)
- Silicon Carbide (3)
- Stainless Steel (3)
- Synchrotron X-ray computed tomography (3)
- TES (3)
- Temperature emissivity separation (3)
- Tensile properties (3)
- Thermografie (3)
- Ultrasonic-assisted milling (3)
- Welding simulation (3)
- X-Ray imaging (3)
- µ-gravity (3)
- μ-gravity (3)
- 3D Druck (2)
- Active thermography (2)
- Advanced Manufacturing (2)
- Aerosol measurements (2)
- Affinity Chromatography (2)
- Ageing (2)
- Alkali-activated materials (2)
- Artificial weathering (2)
- Atomic force microscopy (2)
- Austenitic steel 316L (2)
- Bead-on-plate welds (2)
- Bioactive glass (2)
- Bragg-edge (2)
- Bridging voids (2)
- Build direction (2)
- Build-up Orientation (2)
- Cold Spray (2)
- Computed tomography (CT) (2)
- Condensed Matter Physics (2)
- Condition monitoring (2)
- Copper powder particles (2)
- Crack (2)
- DED-arc (2)
- Damage evolution (2)
- Data preparation (2)
- Design for Additive Manufacturing (DfAM) (2)
- Dielectric properties (2)
- Digital transformation (2)
- Digitalisation (2)
- Distortion (2)
- Duplex AISI 2205 (2)
- EMN (2)
- Eddy Current (2)
- Eddy current testing (2)
- Electrical conductivity (2)
- Electron backscatter diffraction (2)
- Electron microscopy (2)
- Embedded electronics (2)
- Emission testing (2)
- Emissivity (2)
- European Metrology Networks (EMNs) (2)
- FPLC (2)
- Fatigue Crack Propagation (2)
- Fatigue performance (2)
- Fatigue properties (2)
- Flowability (2)
- Flying Spot Laser Thermography (2)
- Fume (2)
- General Materials Science (2)
- Grain refinement (2)
- HPLC (2)
- Heat treatments (2)
- High Temperature Testing (2)
- High strength steel (2)
- High-resolution camera (2)
- High-strength structural steels (2)
- Hot stamping (2)
- Hybrid Part (2)
- Image processing (2)
- In-process monitoring (2)
- In-situ process monitoring (2)
- Indoor air quality (2)
- Industrial and Manufacturing Engineering (2)
- Infrastructure (2)
- Joined nickel-based alloys (2)
- Kaltrisssicherheit (2)
- Keyhole porosity (2)
- LBM (2)
- LCF (2)
- LSD-print (2)
- Laboratory specimens (2)
- Lack-of-fusion (2)
- Large electrical high-voltage machine (2)
- Laser Powder Bed Fusion (PBF-LB/M) (2)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (2)
- Laser Pulver Auftragsschweißen (2)
- Laser implantation (2)
- Laser powderbed fusion (2)
- Laser-induced slip casting (2)
- Lattice Structures (2)
- Lattices (2)
- Layerwise (2)
- Life Cycle Assessment (2)
- Lightweight structures (2)
- Liquation Cracking (2)
- Liquid metal embrittlement (2)
- Lunar habitat (2)
- Lunar regolith (2)
- Lunar regolith simulant (2)
- MMC (2)
- Machine learning (2)
- Magnetocaloric (2)
- Mechanics of Materials (2)
- Melt pool boundary (2)
- Micro-CT (2)
- Microstructural characterization (2)
- Microstructure and texture (2)
- Multiphoton Lithography (2)
- NDT (2)
- Nickel (2)
- Non-Destructive testing (2)
- Nondestructive Testing (2)
- PBF-LB/M/316L (2)
- PBF/LB-M (2)
- Particle gas emission (2)
- Path planning (2)
- Paving (2)
- Plume (2)
- Porcelain (2)
- Pores (2)
- Porosity prediction (2)
- Powder Bed Fusion (2)
- Pre-weld Preparation (2)
- Process atmosphere (2)
- Process chain (2)
- Process parameter optimization (2)
- Quality Assurance (2)
- Raman spectroscopy (2)
- Refill friction stir spot welding (2)
- Refraction (2)
- Repair of gas turbine blades (2)
- Representative specimens (2)
- Reproducibility (2)
- Residual stress state (2)
- Ressidual stress (2)
- Roughness (2)
- Round robin (2)
- SWIR camera (2)
- SZ2080 negative photo-resist (2)
- Selected Laser Melting (2)
- Selektive-laser-melting (2)
- Silicon carbide (2)
- Solar sintering (2)
- Solidification cracking (2)
- Space (2)
- Spark plasma sintering (2)
- Spatter (2)
- Stakeholder (2)
- Submerged arc welding (2)
- Supportless (2)
- Surface integrity (2)
- Surface modification (2)
- Surface roughness analysis (2)
- Tensile Properties (2)
- Tensile performance (2)
- Tensile testing (2)
- Thermal Spray (2)
- Thermal history (2)
- Ti-Nb alloy (2)
- Time over threshold (2)
- Titanium (2)
- Transmission electron microscopy (2)
- Transparent ceramics (2)
- Two Photon Polymerization (2)
- Two-photon polymerisation (2)
- Two-photon polymerization (2)
- Vickers hardness (2)
- Windenergie (2)
- Wire Arc Additive Manufacturing (2)
- Wire arc additive manufacturing (2)
- X-Ray Diffraction (2)
- X-ray analysis (2)
- X-ray imaging (2)
- X-ray refraction techniques (2)
- ZCF (2)
- Zero-g (2)
- 2PP (1)
- 3D printer (1)
- 3D-Metal-Printing (1)
- 3d printing (1)
- 3d structuring (1)
- AFM (1)
- AHSS (1)
- AM IN718 (1)
- AM feature integration (1)
- ATZ (1)
- Absorption edge tomography (1)
- Acoustic Emission (1)
- Additive manufactured Ni-base superalloys (1)
- Additive surface treatment (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced Materials (1)
- Advanced high strength steels (1)
- Advanced high-strength steel (1)
- Aerospace (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Aging (1)
- Air Void System (1)
- Air pollution (1)
- Air-coupled ultrasonic testing (1)
- Al alloy (1)
- AlMg0.7SiTiB filler wire (1)
- Alcium alkali phosphate (1)
- Alloy 36 (1)
- Alloys (1)
- Alpha-tricalcium phosphate (1)
- Alumina toughened zirconia (1)
- Aluminium Alloy (1)
- Aluminum bronze (1)
- Analytical model (1)
- Antibodies (1)
- Antibody Purification (1)
- Artificial intelligence (1)
- As-built LPBF IN718 alloy (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atmospheric pressure plasma (1)
- Austenitischer Stahl (1)
- Automated Purification (1)
- Automotive (1)
- BPF-LB/M (1)
- Bending property (1)
- Bending test (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactivity (1)
- Bioceramic (1)
- Biomaterials (1)
- Biphasic calcium phosphate (1)
- Bone regeneration (1)
- Borosilicate Glass (1)
- Bragg-edge neutron 2D imaging (BENI) (1)
- Build Angle (1)
- Build-up strategy (1)
- C-F bond activation (1)
- CFR-PEEK (1)
- CONSENS (1)
- Calcium phosphate (1)
- Calculation time (1)
- Calibration structure (1)
- Camera (1)
- Cellular substructure (1)
- Cement (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Characterisation (1)
- Cimensional Accuracy (1)
- Citizen Science (1)
- Clad steels (1)
- Cladding (1)
- Clay ISRU (1)
- Coating (1)
- Column holder (1)
- Component (1)
- Computer Aided Manufacturing (1)
- Concentration step (1)
- Concrete modelling (1)
- Confocal raman imaging (1)
- Construction (1)
- Contour scan strategy (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Coordinate measurement machine (1)
- Corrosion (1)
- Crater (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Critical strain (1)
- Crystal Plasticity Modelling (1)
- Crystallization (1)
- Crystallographic texture control (1)
- Cutting forces (1)
- Cuttlefish (1)
- DED-EB (1)
- DED-L (1)
- DIC (1)
- Damage Tolerance (1)
- Damage prediction (1)
- Damage tolerance (1)
- Data (1)
- Data Fusion (1)
- Data Integrity (1)
- Data-driven quality assurance (1)
- Debinding (1)
- Defect Detection (1)
- Defect Prediction (1)
- Defect prediction (1)
- Density measurement (1)
- Dental (1)
- Deposition rate (1)
- Design of experiments (1)
- Diagnostic Antibodies (1)
- Dielectric Spectroscopy (1)
- Dielectric characterization (1)
- Diffraction Elastic Constants (1)
- Diffraction contrast neutron imaging (1)
- Diffraction elastic constants (1)
- Diffraction elastic constants (DECs) (1)
- Diffraction methods (1)
- Diffraction-elastic constants (1)
- Digital Image Correlation (1)
- Digital Twin (1)
- Digital image correlation (1)
- Direct Energy Deposition (1)
- Directional grain growth (1)
- Dissimilar joints (1)
- Distortion simulation (1)
- Distortion upon baseplate removal (1)
- Ditigtal image correlation (1)
- Down Stream Processing (1)
- Drywood termite (1)
- Dwell-time (1)
- EAC-1A (1)
- EBAM (1)
- EBSD (1)
- EBSD analysis (1)
- Early-age concrete (1)
- Eddy-current testing (1)
- Edge effects (1)
- Edge quality (1)
- Effect of scanning strategies (1)
- Efficient modelling (1)
- Elastic Constants (1)
- Elastic constants (1)
- Electrical insulation (1)
- Electromagnetic support (1)
- Electron Backscatter Diffraction (1)
- Electron backscatter diffraction (EBSD) (1)
- Electron backscattered diffraction (1)
- Electron beam (1)
- Electron beam powder bed fusion (1)
- Electron beam welding (1)
- Emerging technologies (1)
- Emission (1)
- Emission test chamber (1)
- Emisssivity (1)
- Energy dispersive X Ray diffraction (1)
- Energy harvesting (1)
- Energy parameters of the arc (1)
- Environment (1)
- Ermüdung (1)
- European Metrology Network (1)
- European Metrology Network for Advanced Manufacturing, Strategic Research Agenda (1)
- Exposure risk (1)
- FAIR data (1)
- FEM Simulation (1)
- FFF (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-3D-Printer (1)
- Fabrication parameters (1)
- Fartigue Strength (1)
- Fast scanning calorimetry (1)
- Fatigue Crack Growth (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stagesdefects (1)
- Fatigue damage (1)
- Fatigue life (1)
- Fatigue loading (1)
- Fatigue strength (1)
- Feedstock powder (1)
- Feldspar (1)
- Fenics (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element method (1)
- Finite element simulation (1)
- Finite-Elemente-Methode (1)
- Firing (1)
- Flange width (1)
- Flaw detection (1)
- Flexible Magnetic Sensors (1)
- Flow Cell (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Force-distance-curve (1)
- Fractography (1)
- Fracture Mechanics (1)
- Fracture mechanics (1)
- Friction (1)
- Functional Materials (1)
- Functionally graded porous scaffolds (1)
- Fused Filament Fabrication (1)
- Fusion welding (1)
- GMA welding (1)
- Galvanized steel (1)
- Gap bridgeability (1)
- Gas discharges (1)
- Gas flow assisted powder deposition (1)
- Gefügedegradation (1)
- Giant magnetoresistance (1)
- Glass (1)
- Glass Support (1)
- Glass-ceramics definition (1)
- Grain growth (1)
- Graphs (1)
- Gyroid lattice (1)
- HCF (1)
- HF-shuttle (1)
- HIP (1)
- HV-Insulation (1)
- Hardness (1)
- Hausner ratio (1)
- Haynes 282 (1)
- Haynes282 (1)
- Heat Input (1)
- Heat Treatments (1)
- Heat flow (1)
- Helium (1)
- Heterodyning (1)
- Heterogeneous catalysis (1)
- High Cycle Fatigue (1)
- High Voltage Insulation (1)
- High speed laser cladding (1)
- High strength AlMgSi aluminium alloys (1)
- High strength steels (1)
- High temperature alloys (1)
- High-Power Welding (1)
- High-Speed Separations (1)
- High-strength filler metals (1)
- High-strength fine-grained steels (1)
- High-strength steel filler metal (1)
- Hot Cracks (1)
- Hot isostatic pressing (1)
- Hot stage microscopy (1)
- Human Plasma (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid Manufacturing (1)
- Hybrid laser arc welding (1)
- Hybrid laser-arc welding (1)
- Hybrid manufacturing (1)
- Hybrid part (1)
- Hygienische Bewertung (1)
- Hyperspectral (1)
- IBESS model for short cracks (1)
- IN 625 (1)
- IN 718 (1)
- IN718 PBF-LB/M (1)
- IN725 (1)
- IN738LC (1)
- INCONEL 718 (1)
- IgG determination (1)
- Image registration (1)
- Images (1)
- Imaging (1)
- In situ NDE (1)
- In situ alloying (1)
- In situ heating (1)
- In-Situ Techniques (1)
- In-Situ Testing (1)
- In-situ (1)
- In-situ CT (1)
- In-situ Process Monitoring (1)
- In-situ compression CT (1)
- In-situ heat treatment (1)
- In-situ thermography (1)
- In-situ tomography (1)
- In-vivo (1)
- In718 (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Indoor emission (1)
- Industry 4.0 (1)
- Influence of rheology modifying admixtures on hydration of cementitious suspensions (1)
- Infrared Thermography (1)
- Inkjet (1)
- Integrated alignment features (1)
- Inter-layer time (1)
- Intergranular strain (1)
- Intermodulation AFM (1)
- Interpenetrating polymer networks (1)
- Interphase residual stress (1)
- JNP (1)
- JNP AdvManuNet (1)
- Joining process (1)
- Kernel average misorientation (1)
- Kitagawa-Takahashi (K-T) diagram (1)
- Korrosion (1)
- L-PBF IN718 material (1)
- LSD print (1)
- LTCC (1)
- LW (1)
- Laboratory X-ray diffraction (1)
- Laboratory energy-dispersive X-ray diffraction (EDXRD) (1)
- Large Scale Facilities (1)
- Laser Beam Welding (1)
- Laser Implantation (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed fusion (1)
- Laser Welding (LW) (1)
- Laser cutting (1)
- Laser direct writing (1)
- Laser induced slipcasting (1)
- Laser methods (1)
- Laser powder bed fusion (PBF-LB/M, L-PBF) (1)
- Laser powder-based directed energy deposition (1)
- Laser powder-bed fusion (1)
- Laser surfacing (1)
- Laser thermography (1)
- Laser writing (1)
- Laser-based additive manufacturing (1)
- Laser-based powder bed fusion of metal (PBF-LB/M) (1)
- Laser-metal-deposition (1)
- Laser-metal-depositon (1)
- Layered double hydroxide (1)
- Liquid Metal Embrittlement (1)
- Liquid Metal Embrittlement (LME) (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Lithography-based technologies (1)
- Low cycle fatigue (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle-fatigue behaviour (1)
- MAG-Welding (1)
- MANUFACT (1)
- MGS-1 regolith simulant (1)
- MOUSE (1)
- MPI (1)
- MPLS (1)
- MWIR (1)
- Machine learning segmentation (1)
- Machine vision (1)
- Machine-Learning Segmentation (1)
- Machining (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic nano-particles (1)
- Magnetic swimmers (1)
- Magnetocoloric (1)
- Manufact (1)
- Maritime Components (1)
- Mars (1)
- Maskinteknik (1)
- Material characterization (1)
- Material extrusion (MEX) (1)
- Material properties (1)
- Material science (1)
- Materials Science (1)
- Materials science (1)
- Mean-field modelling (1)
- Mechanical Behavior (1)
- Mechanical properties of the joints (1)
- Medical implants (1)
- Mehrskalenmodell (1)
- Melt pool depth (1)
- Melt pool dinamics (1)
- Melt pool monitoring (1)
- Melt-pool-monitoring (1)
- Melting (1)
- Metal (1)
- Metal additive manufacturing (MAM) (1)
- Metal matrix composites (1)
- Metal organic framework (1)
- Metal powder characterization (1)
- Metallic Glass (1)
- Metals and Alloys (1)
- Micro computed tomography (1)
- Micro-computed tomography (1)
- Microfabrication (1)
- Micromechnical properties (1)
- Microprinting (1)
- Microscopy (1)
- Microstructural evolution (1)
- Microstructure analysis (1)
- Microstructure characterisation (1)
- Microstructure characterization (1)
- Microstructure evolution (1)
- Mikrostruktur (1)
- Model calibration (1)
- Monoclonal Antibodies (1)
- Monolith (1)
- Moon (1)
- Multi photon lithography (1)
- Multi-materials joining (1)
- Multi-photon light structuring (1)
- Multi-principal element alloys (1)
- Multiphoton laser structuring (1)
- Multiple-layered scaffold (1)
- Mussel-inspired materials (1)
- NIR (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- NanoCAM (1)
- Nanostructured powder (1)
- Near-surface X-ray diffraction (1)
- Networking (1)
- Neutron (1)
- Neutron and X-ray diffraction (1)
- Neutrons diffraction (1)
- Ni alloy (1)
- Nickel-based superalloy (1)
- Nickel-based superalloys (1)
- Non-destructiv testing (1)
- Non-destructive Materials (1)
- Non-destructuve testing (1)
- Non-weldable superalloy (1)
- Nondestructive testing (1)
- Numerical Simulation (1)
- Numerical simulation (1)
- Numerical simulations (1)
- OMS (1)
- On-line monitoring (1)
- Online NMR Spectroscopy (1)
- Online monitoring (1)
- Online quality control (1)
- Ontology (1)
- Open Data (1)
- Open Science (1)
- Open data on zenodo (1)
- Open source (1)
- Optical Emission Spectroscopy (1)
- Optical emission spectroscopy (1)
- Optical flow (1)
- Optics (1)
- Optimization workflow (1)
- Osseointegration (1)
- Overview (1)
- PBFLB/M AlSi10Mg alloy (1)
- Packing density (1)
- Parabolic flight (1)
- Particle size distribution (1)
- Pearlitic microstructure (1)
- Performance oriented concrete design (1)
- Phase-field simulation (1)
- Photopolymerization (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Plasma acoustics (1)
- Plasma cutting (1)
- Plasma spray (1)
- Plastic deformation (1)
- Polycaprolactone (1)
- Polyclonal Antibodies (1)
- Polyethylene glycol diacrylate (1)
- Polyglycerol (1)
- Polymer (1)
- Polymer nanocomposites (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Polymeric Materials (1)
- Polymers (1)
- Polyurethane acetate vinyl acrylate (1)
- Pore formation (1)
- Porosity growth (1)
- Porous materials (1)
- Post NDE (1)
- Post processing heat treatment (1)
- Powder Analysis (1)
- Powder Characterization (1)
- Powder analysis (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder bed fusion (1)
- Powder bed fusion Laser beam (1)
- Powder deposition (1)
- Powder flow (1)
- Powder methods (1)
- Powder rheology (1)
- Powder-based processes (1)
- Ppreheating temperature (1)
- Precast concrete (1)
- Preceramic polymer (1)
- Precipitation hardening aluminum alloys (1)
- Preferential orientation (1)
- Preheatin (1)
- Preheating temperature (1)
- Principal stress (1)
- Principal stress components (1)
- Printed Electronics (1)
- Printing (1)
- Process (1)
- Process Chain Integration (1)
- Process Control (1)
- Process Simulation (1)
- Process development (1)
- Protein A (1)
- Protein Purification (1)
- Purification (1)
- Quality monitoring (1)
- Radiography (1)
- Radiological inspections (1)
- Rail tracks (1)
- Rapid prototyping (1)
- Re-entrant surface feature (1)
- Real-time deformation (1)
- Recycling (1)
- Reduced order modelling (1)
- Reference data (1)
- Reference material (1)
- Reference structure (1)
- Regeneration (1)
- Regolith (1)
- Repair welding (1)
- Reparaturschweißen (1)
- Representative Specimens (1)
- Research (1)
- Research and Development (1)
- Residual powder removal (1)
- Residual stress in AM (1)
- Residual stress measurements (1)
- Resistance Spot Welding (RSW) (1)
- Rheology (1)
- Rheometry (1)
- Robocasting (1)
- Robustness (1)
- Roll-to-Roll Processing (1)
- Rotational (1)
- SAXS (1)
- SEM micrography (1)
- SLS (1)
- SRA (1)
- SWIR (1)
- SWIR thermography (1)
- Safety (1)
- Scaffold geometry (1)
- Scan strategies (1)
- Scan strategy influence (1)
- SchwarzP cells (1)
- Seam geometry (1)
- Selective laser beam melting (1)
- Selective laser melted materials (1)
- Self-Assembly (1)
- Self-organization (1)
- Sensors (1)
- Separation (1)
- Shipbuilding steel (1)
- Silicate glass-ceramics (1)
- Sintered Material (1)
- Slicers (1)
- Smectite (1)
- Softening temperature (1)
- Sol-gel (1)
- Solid support (1)
- Solidification behaviour (1)
- Space exploration (1)
- Stainless steel (1)
- Stainless steels (1)
- Standardisation (1)
- Standardization (1)
- Standards (1)
- Steel (1)
- Steel 316L (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strategic Research Agenda (SRA), (1)
- Strengthening mechanisms (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress concentration tensor (1)
- Stress-relief heat-treatments (1)
- Structural Integrity (1)
- Structural precision (1)
- Sub-4nm particles (1)
- Superalloy (1)
- Superlattice extrinsic stacking faults (1)
- Support configurations (1)
- Surface coating (1)
- Surface properties (1)
- Surface roughness (1)
- Surface structuring (1)
- Surface temperature (1)
- Surface topography (1)
- Synchrotron CT (1)
- Synchrotron Radiation (1)
- Synchrotron X-ray CT (1)
- Synchrotron X-ray Refraction (1)
- Synchrotron X-ray diffraction (SXRD) (1)
- Synchrotron X-ray refraction radiography (1)
- Synchrotron computed tomography (1)
- Synchrotron refraction (1)
- Synchrotron refraction radiography (1)
- Synchrotron tomography (1)
- TIG welding (1)
- TPMS structures (1)
- Technical Ceramics (1)
- Technological innovation (1)
- Technologies (1)
- Temperature behavior (1)
- Temperature dependence (1)
- Temperature distribution (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Terpolymer (1)
- Test method (1)
- Test structure (1)
- Textile binder (1)
- Therapeutic Antibodies (1)
- Thermal imaging (1)
- Thermocouple (1)
- Thick-Walled Steel (1)
- Thick-walled steel (1)
- Ti6Al4V alloy (1)
- Titanium alloy (1)
- Tomography (1)
- Tool steel (1)
- Tricalcium Phosphate (1)
- Trinkwasser (1)
- Triobology (1)
- Triply Periodical Minimal Surface (1)
- Triply periodic minimal surfaces (1)
- Turbine components (1)
- Two photon polymerisation (1)
- Two-Photon Polymerization (1)
- Two-photon adsorption (1)
- Two-photon polymerisatio (1)
- Two-run welding technique (1)
- UV/VIS spectroscopy (1)
- Upscaling (1)
- VHCF (1)
- VOC (1)
- Vinyl monomer (1)
- WAAM Ti-6Al-4V (1)
- Water-based (1)
- Wear (1)
- Weld geometry (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Weldx (1)
- Wetting (1)
- White light interferometry microscopy (1)
- Widerstandspunktschweißen (1)
- Wire electron beam additive manufacturing (1)
- Wire-based additive manufacturing (1)
- Wärmeführung (1)
- X-Ray Computed Tomography (1)
- X-Ray Imaging (1)
- X-Ray refraction (1)
- X-ray CT (1)
- X-ray Computed tomography (1)
- X-ray Diffraction (1)
- X-ray Refaction radiography (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (XCT) (1)
- X-ray photoelectron spectroscopy (1)
- X-ray refraction radiography (1)
- X-ray scattering (1)
- X-ray tomographic (1)
- X-ray-refraction (1)
- Young´s modulus (1)
- Zink (1)
- Zirconium (1)
- additive manufacturing (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- ceramic (1)
- cold cracking safety (1)
- dental (1)
- fatigue crack growth (1)
- high-resolution camera (1)
- high-strength steel (1)
- hybrid repair (1)
- in-situ (1)
- infrared Thermography (1)
- microstructure analysis (1)
- position detection (1)
- powder bed fusion of metals utilizing a laser beam (1)
- selective laser melting (1)
- stl code (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (257)
- 9 Komponentensicherheit (244)
- 8.5 Röntgenbildgebung (192)
- 5 Werkstofftechnik (148)
- 9.3 Schweißtechnische Fertigungsverfahren (98)
- 9.4 Integrität von Schweißverbindungen (89)
- 8.0 Abteilungsleitung und andere (82)
- 5.4 Multimateriale Fertigungsprozesse (77)
- 9.6 Additive Fertigung metallischer Komponenten (70)
- 5.2 Metallische Hochtemperaturwerkstoffe (37)
Paper des Monats
- ja (6)
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.
For a deep process understanding of the laser powder bed fusion process (PBF-LB/M), recording of the occurring surface temperatures is of utmost interest and would help to pave the way for reliable process monitoring and quality assurance. A notable number of approaches for in-process monitoring of the PBF-LB/M process focus on the monitoring of thermal process signatures. However, due to the elaborate calibration effort and the lack of knowledge about the occurring spectral directional emissivity, only a few approaches attempt to measure real temperatures. In this study, to gain initial insights into occurring in the PBF-LB/M process, measurements on PBF-LB/M specimens and metal powder specimens were performed for higher temperatures up to T = 1290 °C by means of the emissivity measurement apparatus (EMMA) of the Center for Applied Energy Research (CAE, Wuerzburg, Germany). Also, measurements at ambient temperatures were performed with a suitable measurement setup. Two different materials—stainless steel 316L and aluminum AlSi10Mg—were examined. The investigated wavelength λ ranges from the visible range (λ-VIS = 0.40–0.75 µm) up to the infrared, λ = 20 µm. The influence of the following factors were investigated: azimuth angle φ, specimen temperature TS, surface texture as for PBF-LB/M surfaces with different scan angles α, and powder surfaces with different layer thicknesses t.
For a deep process understanding of the laser powder bed fusion process (PBF-LB/M), recording of the occurring surface temperatures is of utmost interest and would help to pave the way for reliable process monitoring and quality assurance. A notable number of approaches for in-process monitoring of the PBF-LB/M process focus on the monitoring of thermal process signatures. However, due to the elaborate calibration effort and the lack of knowledge about the occurring spectral directional emissivity, only a few approaches attempt to measure real temperatures. In this study, to gain initial insights into occurring in the PBF-LB/M process, measurements on PBF-LB/M specimens and metal powder specimens were performed for higher temperatures up to T = 1290 °C by means of the emissivity measurement apparatus (EMMA) of the Center for Applied Energy Research (CAE, Wuerzburg, Germany). Also, measurements at ambient temperatures were performed with a suitable measurement setup. Two different materials—stainless steel 316L and aluminum AlSi10Mg—were examined. The investigated wavelength λ ranges from the visible range (λ-VIS= 0.40–0.75 µm) up to the infrared, λ = 20 µm. The influence of the following factors were investigated: azimuth angle φ, specimen temperature TS, surface texture as for PBF-LB/M surfaces with different scan angles α, and powder surfaces with different layer thicknesses t.
AbstractPowder Bed Fusion with Laser Beam of Metals (PBF-LB/M) has gained more industrial relevance and already demonstrated applications at a small series scale. However, its widespread adoption in various use cases faces challenges due to the absence of interfaces to established Manufacturing Execution Systems (MES) that support customers in the predominantly data-driven quality assurance. Current state-of-the-art PBF-LB/M machines utilize communication architectures, such as OPC Unified Architecture (OPC UA), Message Queuing Telemetry Transport (MQTT) and Representational State Transfer Application Programming Interface (REST API). In the context of the Reference Architecture Model Industry 4.0 (RAMI 4.0) and the Internet of Things (IoT), the assets, particularly the physical PBF-LB/M machines, already have an integration layer implemented to communicate data such as process states or sensor values. Missing is an MES component acting as a communication and information layer. To address this gap, the proposed Extract Transform Load (ETL) pipeline aims to extract relevant data from the fabrication of each build cycle down to the level of scan vectors and additionally to register process signals. The suggested data schema for archiving each build cycle adheres to all terms defined by ISO/TC 261—Additive Manufacturing (AM). In relation to the measurement frequency, all data are reorganized into entities, such as the AM machine, build cycle, part, layer, and scan vector. These scan vectors are stored in a runtime-independent format, including all metadata, to be valid and traceable. The resulting machine log represents a comprehensive documentation of each build cycle, enabling data-driven quality assurance at process level.
Motivated by the aim of developing an additive manufacturing (AM) technology easily integrated in the process chains of the ceramic industry, the LSD-print technology was conceived as a slurry-based variation of binder jetting (BJ).
BJ and other powder bed technologies (such as powder bed fusion) are amongst the most successful AM techniques, especially for metals and polymers, thanks to their high productivity and scalability. The possibility to use commercially available feedstocks (in the form of powders or granules) makes BJ also attractive for ceramic materials. The application of these techniques to most advanced ceramics has however been difficult so far, because of the limitations in depositing homogeneous layers with fine, typically poorly flowable powders.
In this context, the "layerwise slurry deposition" (LSD) was proposed at TU Clausthal (Germany) as a slurry-based deposition of ceramic layers by means of a doctor blade. Combined with layer-by-layer laser sintering of the material, the LSD process was originally demonstrated for the rapid prototyping of silicate ceramics. Due to the difficulties in controlling the microstructure and the defect formation in laser-sintered technical ceramics, the LSD process was later combined with inkjet printing in the LSD-print technology, which has been further developed at BAM (Germany) in the past decade.
The LSD-print technology combines the high speed of inkjet printing, typical of BJ, with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. Due to the mechanical stability of the powder bed, the process can also be carried out with continuous layer deposition on a rotating platform, which further increases its productivity.
This presentation will delve into 10 years of research on the LSD-print of a wide variety of technical ceramics including alumina, silicon carbides and dental ceramics. The discussion highlights how a seemingly small process and feedstock modification (from powders to slurries) has great influence on the challenges and potential of this process, which are being addressed on its path to industrialization.
Multiphoton lithography (MPL), an emerging microfabrication technique, shows great potential in a variety of applications ranging from tissue engineering to soft micro-robotics. Fabricated micro-objects often are expected to undergo shape morphing or bending. Furthermore, ensuring precise property tuning becomes detrimental for the functionality of MPL microstructures. Herein, we present novel MPL materials based on interpenetrating networks (IPNs), which effectively combine the advantages of acrylate and epoxy thermoset systems. A library of 3D MPL IPN microstructures with high 3D structural stability and tailored thermal and micromechanical properties is achieved. MPL laser velocity and fabrication power can be used to tune the morphology and therefore properties of IPN. New IPN microstructures with materials Young's moduli of 4 to 6 MPa demonstrate susceptibility to deformation with high to fully elastic response. Such soft elastic materials hold immense promise within morphable microsystems, soft micro-robotics and cell engineering applications.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method enabling the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder. Not only very fine, submicron powders can be processed with low organics, but also the dense powder bed provides excellent support to the parts built. The LSD technology can be combined with binder jetting to develop the so-called “LSD-print” process. LSD-print combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to traditional processing.
The latest development of this technology shows that it is possible to print ceramic parts in a continuous process by depositing a layer onto a rotating platform, growing a powder bed following a spiral motion. The unique mechanical stability of the layers in LSD-print allows to grow a powder bed several centimeters thick without any lateral support. The continuous layer deposition allows to achieve a productivity more than 10X higher compared to the linear deposition, approaching a build volume of 1 liter/hour.
Fully automated and decentralized fused filament fabrication of ceramics for remote applications
(2024)
Manufacturing of ceramic components in remote (i.e., geographically isolated) settings poses significant challenges where access to conventional manufacturing facilities is limited or non-existent. Fused Filament Fabrication (FFF) enables the rapid manufacturing of ceramic components with complex geometries. Parts formed by FFF require subsequent debinding and sintering to reach full density. Debinding and sintering are typically executed in separate steps with different equipment, necessitating extensive human handling which hinders process automation and may be challenging for the operator in isolated environments. This poster presents an innovative approach: the integration of all process steps into a single, fully automated system, streamlining the process and minimizing human involvement. Our system combines a dual extrusion filament printer with a porous and heat-resistant ceramic print bed. The porous print bed enables mechanical interlocking of the first printed layers, ensuring adhesion and structural integrity during FFF. Ceramic parts are printed onto thin sacrificial rafts, which are built using an interface material with the same binder as the ceramic filament. After the print is completed, the heat-resistant print bed with all parts is transferred seamlessly with a carrier system into a high-temperature furnace for debinding and sintering. During sintering the sacrificial raft is disintegrated, allowing for unconstrained sintering of the ceramic parts and easy removal of the finished parts. In conclusion, our integrated approach enables significant advancements in the fabrication of complex ceramic components in remote environments with increased efficiency and minimal human handling.
The Laser-Induced Slip Casting is an additive manufacturing technology specifically developed for ceramic materials using water-based ceramic slurries. The process takes place layer-by-layer in a similar fashion as top-down vat photopolymerization, selectively consolidating each layer by means of a laser energy source positioned on the top. Contrary to vat photopolymerization, in which the consolidation is achieved by selectively cross-linking a ceramic-filled resin, LIS uses water-based slurries with a low amount of organic additives (typically < 5 wt%) as feedstocks.
In LIS, a green body is formed by local evaporation of water which causes the suspension to collapse forming a cast, following a mechanism similar to slip casting. Only a small content of organic additives is needed to effectively disperse the ceramic particles and to increase the green strength.
The technology is very versatile and can be applied to all ceramic systems that can be dispersed in water. One of the main advantages is that even dark materials such as silicon carbide can be processed without issues related to light scattering and absorption.
The presentation will discuss strengths and limitations of LIS compared to other AM technologies and will highlight the latest results for alumina and for silicon carbide ceramics.
The presentation will start with an overview of ceramic additive manufacturing (AM) technologies and will discuss the potential of AM in the field of bioceramics.
The presentation will then focus on two possible use cases of binder jetting technologies.
In the first example, standard powder-based binder jetting is used to manufacture a porous implant design for large scale bone defects. The related challenges in the process chain will be discussed, from powder synthesis to sintering and characterization of the printed part.
In the second example, the LSD-print slurry-based binder jetting technology is presented as a possibility to adapt powder-bed AM to produce dense ceramic parts. The use case will focus on an application in the field of dental ceramics, specifically for the manufacturing of patient individualized single tooth restorations (veneers, crowns) with a high throughput process chain.
Rotational rheometry test of Portland cement-based materials - A systematic literature review
(2024)
This study systematically reviews 62 papers on the use of rotational rheometry to assess the fresh state behavior of Portland cement-based materials. The research highlights the wide variation in test methods and aims to provide a comprehensive overview. Findings reveal that 50.0% of studies employed vane geometry, despite its limitations in providing transformation equations. Regarding dynamic shearing tests, 67.0% followed a consensus using a pre-shearing step and a step-wise routine with stabilization times ≥ 10 s. While the Bingham model is commonly used, the study emphasizes the importance of considering shear-thinning behavior in cementitious materials. Models like Herschel-Bulkley and modified Bingham may be more appropriate. This review offers insights into testing conditions for rotational rheometry of cementitious materials, serving as a foundation for future research in the field.
Additive manufacturing of metals – and in particular building with laser-based powder bed fusion – is highly flexible and allows high-resolution features and feedstock savings. Meanwhile, though space stations in low Earth orbit are established, a set of visits to the Moon have been performed, and humankind can send out rovers to explore Venus and Mars, none of these milestone missions is equipped with technology to manufacture functional metallic parts or tools in space. In order to advance space exploration to long-term missions beyond low Earth orbit, it will be crucial to develop and employ technology for in-space manufacturing (ISM) and in-situ resource utilisation (ISRU). To use the advantages of laser-based powder bed fusion in these endeavours, the challenge of powder handling in microgravity must be met. Here we present a device capable of building parts using metallic powders in microgravity. This was proven on several sounding rocket flights, on which occasions Zr-based metallic glass parts produced by additive manufacturing in space were built. The findings of this work demonstrate that building parts using powder feedstock, which is more compact to transport into space than wire, is possible in microgravity environments. This thus significantly advances ISRU and ISM and paves the way for future tests in prolonged microgravity settings.
Multiphoton lithography (MPL), an emerging truly 3D microfabrication technique, exhibits substantial potential in biomedical applications, including drug delivery and tissue engineering. Fabricated micro-objects are often expected to undergo shape morphing or bending of the entire structure or its parts. Furthermore, ensuring precise property tuning is detrimental to the realization of the functionality of MPL microstructures. Herein, novel MPL materials based on interpenetrating polymer networks (IPNs) are presented that effectively combine the advantages of acrylate and epoxy systems. IPNs with varying component ratios are investigated for their microfabrication performance and structural integrity with respect to thermal and micromechanical properties. A variety of high-resolution techniques is applied to comprehensively evaluate IPN properties at the bulk, micron, and segmental levels. This study shows that the MPL laser scanning velocity and power, photoinitiator content, and multi-step exposure can be used to tune the morphology and properties of the IPN. As a result, a library of 3D MPL IPN microstructures with high 3D structural stability and tailored thermal and micromechanical properties is achieved. New IPN microstructures with Young’s moduli of 3–4 MPa demonstrate high-to-fully elastic responses to deformations, making them promising for applications in morphable microsystems, soft micro-robotics, and cell engineering.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
An Amorphous Lewis-acidic Zirconium Chlorofluoride as HF Shuttle: C-F Bond Activation and Formation
(2024)
In recent years, fluorine chemistry has gained increasing political attention. Owing to a growing shortage of fluorspar, a raw material used for producing fluorinated base chemicals, fluorospar has been named among the 30 critical raw materials in the EU.2 As such, it becomes increasingly important to recycle existing fluorinated compounds and make them available as sources of fluorine for reactions. Significant progress has been made in the field of C-F bond activation using heterogeneous catalysts such as aluminum chlorofluoride (ACF).3–5 However, the transfer of fluorine atoms from one molecule to another using heterogeneous catalysts has not yet been reported. In this study, we successfully synthesized amorphous zirconium chlorofluoride (ZCF), and we were able to establish a catalytic behavior of ZCF in C-F bond activation reactions. We present a heterogeneous catalyst that performs dehydrofluorination of a fluoroalkane and consecutive hydrofluorination of an alkyne at room temperature.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with light into the volume of a ceramic powder compound, its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP), and other volumetric methods for the additive manufacture of filigree structures within the volume of ceramic slurries.