Additive Fertigung
Filtern
Dokumenttyp
- Zeitschriftenartikel (55)
- Vortrag (48)
- Beitrag zu einem Tagungsband (25)
- Posterpräsentation (13)
- Forschungsbericht (3)
- Forschungsdatensatz (1)
Schlagworte
- Additive Manufacturing (34)
- Additive manufacturing (32)
- Additive Fertigung (27)
- Thermography (20)
- Laser metal deposition (18)
- Process monitoring (13)
- DED (10)
- Thermografie (10)
- Microstructure (8)
- Ti-6Al-4V (8)
- LMD (7)
- Laser Metal Deposition (7)
- Arc welding (6)
- Open science (6)
- Research data management (6)
- 3D printing (5)
- AM (5)
- Directed Energy Deposition (5)
- Hochfester Stahl (5)
- L-PBF (5)
- Mechanical properties (5)
- Quality assurance (5)
- WelDX (5)
- Widerstandspunktschweißen (5)
- 3D Druck (4)
- Additive Manufacturing (AM) (4)
- Computed Tomography (4)
- DED-Arc (4)
- Direct energy deposition (4)
- Laser Powder Bed Fusion (4)
- Laser Powder Bed Fusion (L-PBF) (4)
- Laser beam welding (4)
- Laser powder bed fusion (4)
- Liquid Metal Embrittlement (4)
- Low Cycle Fatigue (4)
- Porosity (4)
- ProMoAM (4)
- WAAM (4)
- 316L (3)
- AGIL (3)
- Artificial neural network (3)
- CT (3)
- Computed tomography (3)
- Digitalization (3)
- Dimensional accuracy (3)
- Direct Energy Deposition (3)
- Directed energy deposition (3)
- Grain refinement (3)
- Infrared thermography (3)
- Künstliche Intelligenz (3)
- Laser Pulver Auftragsschweißen (3)
- Laser beam melting (3)
- Laser-Pulver-Auftragschweißen (3)
- Mikrostruktur (3)
- Multispectral thermography (3)
- Online Process Monitoring (3)
- Prozessmonitoring (3)
- Prozessüberwachung (3)
- Residual stress (3)
- Resistance spot welding (3)
- Stainless Steel (3)
- TES (3)
- Temperature emissivity separation (3)
- Welding simulation (3)
- Aerosol measurements (2)
- AlSi10Mg (2)
- Computed tomography (CT) (2)
- Condition monitoring (2)
- Crack (2)
- DED-EB (2)
- Data fusion (2)
- Data preparation (2)
- Digital transformation (2)
- Directed Enery Deposition (2)
- Duplex AISI 2205 (2)
- EBAM (2)
- Elektronenstrahlschweißen (2)
- Embedded electronics (2)
- FGM (2)
- Fatigue (2)
- Flüssigmetallinduzierte Rissbildung (2)
- Fume (2)
- Heat treatment (2)
- High Temperature Testing (2)
- Inconel 718 (2)
- LCF (2)
- LPBF (2)
- Lack-of-fusion (2)
- Laser powder bed fusion (L-PBF) (2)
- Laserpulverauftragschweißen (2)
- Life Cycle Assessment (2)
- Liquid metal embrittlement (2)
- NDT (2)
- Neuronales Netz (2)
- Neutron Diffraction (2)
- Neutron diffraction (2)
- Nickel (2)
- Optical Tomography (2)
- Optical tomography (2)
- Optische Tomografie (2)
- Particle gas emission (2)
- Path planning (2)
- Plume (2)
- Powder Bed Fusion (2)
- Process chain (2)
- Refill friction stir spot welding (2)
- Residual Stress (2)
- Schweißnahtbewertung (2)
- Selected Laser Melting (2)
- Selective Laser Melting (SLM) (2)
- Selective laser melting (SLM) (2)
- Selektive-laser-melting (2)
- Simulation (2)
- Spatter (2)
- Submerged arc welding (2)
- Tensile Properties (2)
- Ti64 (2)
- TiAl5V4 (2)
- Time over threshold (2)
- Titan (2)
- Titanium (2)
- Welding (2)
- Wire arc additive manufacturing (2)
- Wire electron beam additive manufacturing (2)
- Wärmenachbehandlung (2)
- Zink (2)
- Zugeigenschaften (2)
- AHSS (1)
- AISI 316L (1)
- AM feature integration (1)
- Acoustic Emission (1)
- Additive manufacturing (AM) (1)
- Advanced High-Strength Steel (AHSS) (1)
- Advanced high strength steels (1)
- Advanced high-strength steel (1)
- Al-Mg-Si (1)
- Al-Mg-Si-Legierungen (1)
- AlMg0.7SiTiB filler wire (1)
- AlMgSi Legierungen (1)
- Aluminum bronze (1)
- Analytical model (1)
- Anlagen (1)
- Artificial intelligence (1)
- Auftragschweißen (1)
- Automobilindustrie (1)
- Automotive (1)
- Bending test (1)
- Build-up strategy (1)
- Calculation time (1)
- Characterisation (1)
- Cimensional Accuracy (1)
- Clad steels (1)
- Computertomografie (1)
- Convolutional neural network (1)
- Crack propagation (1)
- Crater (1)
- Creep behavior (1)
- Critical strain (1)
- Crystal Plasticity Modelling (1)
- CuSn1 (1)
- DED-L (1)
- DED-LB (1)
- DED-arc (1)
- DIC (1)
- Damage prediction (1)
- Defekte (1)
- Density measurement (1)
- Deposition rate (1)
- Design of experiments (1)
- Digital Image Correlation (1)
- Digital image correlation (1)
- Dissimilar joints (1)
- Distortion (1)
- Distortion simulation (1)
- Duktilität (1)
- Dwell-time (1)
- EBSD (1)
- Edge effects (1)
- Edge quality (1)
- Efficient modelling (1)
- Eindringprüfung (1)
- Electromagnetic support (1)
- Electron beam (1)
- Electron beam welding (1)
- Emisssivity (1)
- Energy parameters of the arc (1)
- Environment (1)
- FEM (1)
- Festigkeit (1)
- Finite Element Method (1)
- Finite element simulation (1)
- Flange width (1)
- Flüssigmetallversprödung (1)
- Formgedächtnislegierungen (1)
- Functionally Graded Materials (1)
- Funktionally Graded Material (1)
- Fusion welding (1)
- Fügequalität (1)
- Galvanized steel (1)
- Gap bridgeability (1)
- Gleeble (1)
- Hardness (1)
- Heat Input (1)
- Heat Treatment (1)
- Heat flow (1)
- Heißzug (1)
- High speed laser cladding (1)
- High strength AlMgSi aluminium alloys (1)
- High-Power Welding (1)
- High-stength aluminium alloys (1)
- High-strength fine-grained steels (1)
- Hot Cracks (1)
- Hybrid Laser-Arc Welding (1)
- Hybrid components (1)
- Hybrid laser arc welding (1)
- Hybrid laser-arc welding (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- In situ Monitoring (1)
- In-situ (1)
- In-situ Monitoring (1)
- In-situ Process Monitoring (1)
- Inconel 625 (1)
- Inconel 939 (1)
- Industrial and Manufacturing Engineering (1)
- Infrared Thermography (1)
- Integrated alignment features (1)
- Inter layer time (1)
- KI (1)
- Kriechen (1)
- Körperschall (1)
- Künstliche Neuronale Netze (1)
- LPA (1)
- Laser (1)
- Laser Beam Welding (1)
- Laser Metal Deposition (LMD) (1)
- Laser beam melting (LBM) (1)
- Laser cutting (1)
- Laser powder-based directed energy deposition (1)
- Laser surfacing (1)
- Laser welding (1)
- Laser-Pulver-Auftragschweißen (LPA) (1)
- Laser-metal-deposition (1)
- Laser-metal-depositon (1)
- Laserauftragschweißen (1)
- Laserstrahlschmelzen (1)
- Liquid Metal Embrittlement (LME) (1)
- Low cycle fatigue (1)
- Low-Cycle-Fatigue (1)
- MWIR (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Maritime Components (1)
- Mechanical properties of the joints (1)
- Mechanisch technologische Kennwerte (1)
- Mechanische Eigenschaften (1)
- Melt pool depth (1)
- Melt pool dinamics (1)
- Metal (1)
- Micro computed tomography (1)
- Microstructure characterisation (1)
- Mikro-Computertomographie (1)
- Model calibration (1)
- Multi-materials joining (1)
- NIR (1)
- NiTi-Legierungen (1)
- Nickel-based superalloy (1)
- Non-destructive Materials (1)
- Non-destructive testing (1)
- Normen (1)
- Numerical Simulation (1)
- Numerical simulation (1)
- Numerical simulations (1)
- Oberflächenmessung (1)
- Open Data (1)
- Open source (1)
- Optical Emission Spectroscopy (1)
- Optical emission spectroscopy (1)
- Optical flow (1)
- Optische Emissionsspektroskopie (OES) (1)
- Parabolic flight (1)
- Pearlitic microstructure (1)
- Pipe Welding (1)
- Pipe weld preparation (1)
- Plasma cutting (1)
- Plastic deformation (1)
- Porosität (1)
- Powder Analysis (1)
- Ppreheating temperature (1)
- Precipitation hardening aluminum alloys (1)
- Preheatin (1)
- Process development (1)
- Prüfverfahren (1)
- Quality monitoring (1)
- Qualität (1)
- Radiological inspections (1)
- Rail tracks (1)
- Recycling (1)
- Reduced order modelling (1)
- Reference data (1)
- Research data (1)
- Resistance Spot Welding (RSW) (1)
- Ringversuch (1)
- SLM (1)
- SWIR (1)
- Safety (1)
- Schallemissionsanalyse (SEA) (1)
- Schutzgas (1)
- Schweißsimulation (1)
- Schweißstruktursimulation (1)
- Selective Laser Melting (1)
- Selective laser beam melting (1)
- Shipbuilding steel (1)
- Solidification behaviour (1)
- Solidification cracking (1)
- Stainless steels (1)
- Standardisation (1)
- Statistische Versuchsplanung (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Superalloy (1)
- TIG welding (1)
- Temperature behavior (1)
- Temperature distribution (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Tensile testing (1)
- Texture (1)
- Thermograhy (1)
- Thermographie (1)
- Thick-Walled Steel (1)
- Thick-walled steel (1)
- Titanium alloy (1)
- Turbine components (1)
- Two-run welding technique (1)
- Unterpulverschweißen (1)
- Verzug (1)
- WEBAM (1)
- Welding Current (1)
- Welding Simulation (1)
- Welding parameter (1)
- Weldx (1)
- Widerstandpunktschweißen (1)
- Wire Electron Beam Additive Manufacturing (1)
- Wire-based additive manufacturing (1)
- Wärmebehandlung (1)
- X-ray Diffraction (1)
- X-ray diffraction (1)
- Zinkbeschichtung (1)
- Zwischenlagenzeit (1)
- µ-gravity (1)
Organisationseinheit der BAM
- 9.3 Schweißtechnische Fertigungsverfahren (145) (entfernen)
Eingeladener Vortrag
- nein (48)
As industries move for ever faster development and adoption cycles of emerging new technologies in the field of welding, the meticulous and longer-winded approach of the scientific research process can feel harder to integrate. To help bridge this gap and increase the speed, quality, and adoption rate of publicly funded research, the Bundesanstalt für Materialforschung und -prüfung (BAM) continues to work towards enabling scientists with direct access to necessary software tools and - in the future – highest quality welding research reference data to further foster collaborations.
On the experimental side, the arc welding group at BAM division 9.3 “welding technologies” is continuing to expand and upgrade its capacities of robotic welding systems with integrated state of the art sensor technologies and software solutions. This allows all experiments to be recorded and measured in micro-millimeter accuracy and at sub-millisecond precision, including welding process data, complete spatial geometry and temperature measurements, process video recordings and more. The custom software-based solutions and interfaces allow scaling of the welding systems from large thick plate offshore applications to small additive repair weldments in wind turbine blades to multi-hour continuous weldments in additive manufacturing applications. In addition to the data gathered during the welding process itself, the relevant testing results and materials properties produced at BAM or externally can be integrated seamlessly. This allows detailed traceability of all results back to the actual welding process.
Regardless of the scope and application, complete datasets can be made accessible for research or industry partners in the highest resolution based on the open source WelDX (welding data exchange) file format.
Figure 1. Welding experiment representation including dynamic process data, cross-section imaging and hardness measurements from a single weldx file.
The talk will give an overview of the experimental facilities and workflows as well as current software developments with a focus on research data quality assurance, traceability, and accessibility.
Based on the integration into latest research trends and activities of the “welding technologies” division, the path to publishing reference datasets for arc welding process for various applications and materials is outlined and discussed.
Direct energy deposition additive manufacturing technologies that utilize an electric arc have great potential for generating large volume metal components. However, selecting process parameters that yield the desired near net shape design and requested mechanical component behavior is not a trivial task due to the complex relationship between all process parameters and material characteristics. This presentation exemplifies the application of a newly developed solid welding wire doped with TiB to enhance grain refinement in the deposited metal for additive manufacturing based on DED-Arc of high-strength precipitation hardening AlMgSi-aluminum alloys. It is worth noting that the solid wire is the result of our preliminary metallurgical studies on grain refinement in aluminum weld metal.
Consequently, research focuses on the correlation between process parameters and component quality to understand the underlying mechanisms. This is crucial for evaluating a robust process parameter space that yields component quality in line with corresponding standards which are mainly taken from welding technology.
Specifically, we examine component quality by analyzing pore size and distribution, as well as grain morphology. To enhance the mechanical properties of the deposited metal, a post-weld heat treatment was conducted, comprising of solution treatment, quenching, and artificial aging. The study also evaluates the effects of various heat treatment strategies on the final mechanical properties of the material.
To demonstrate the applicability of 3D metal printing of high-strength aluminium alloys, a more complex demonstrator was created. It has been shown that DED-Arc can produce high-volume aluminium parts with the same quality as the corresponding subtractive processing strategy.
Additionally, the entire additive manufacturing chain has been digitally integrated, enabling traceability of all relevant process steps, which is essential for reliable subsequent quality assessment.
Direct energy deposition additive manufacturing technologies utilizing an electric arc offer a great potential in generating large volume metal components. However, the selection of process parameters that yield the desired near net shape design as well as the requested mechanical component behavior is not a trivial task due to the complex relationship. Exemplarily for additive manufacturing of high-strength precipitation hardening AlMgSi-aluminum alloy this paper shows the application of a newly developed matching solid welding wire doped with TiB as grain refiner. The correlation between process parameters and component quality is examined analyzing the size and distribution of pores as well as the grain morphology. Furthermore, the influences of different post-weld heat treatments are evaluated to meet the reference mechanical properties of the corresponding wrought material. Finally, the digital integration of the entire additive manufacturing chain enables an overall traceability of the relevant process steps which is the basis for a reliable subsequent quality assessment.
In manufacturing, fusion welding processes use a lot of resources, which presents an opportunity to reduce environmental impact. While there is a general understanding of the environmental impact of these processes, it is difficult to quantitatively assess key parameters. This study introduces a welding-specific methodology that uses life cycle assessment (LCA) to evaluate the environmental impact of fusion welding technologies. Our approach analyses the main parameters that affect the environmental performance of different welding techniques, including traditional methods and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. We integrate real-time resource usage data to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact, facilitating the advancement of sustainable manufacturing practices.
Life cycle assessment of fusion welding processes considering upstream and downstream process steps
(2023)
In manufacturing, fusion welding processes consume significant resources, presenting a significant opportunity for reducing environmental impact. Although there is a qualitative understanding of the environmental implications of these processes, a quantitative assessment of key parameters remains complex. This study introduces a welding-specific methodology that employs life cycle assessment (LCA) to quantitatively evaluate the environmental footprint of fusion welding technologies. Our approach identifies and analyses the principal parameters affecting the environmental performance of various welding techniques, including traditional joint welding and additive manufacturing via the Direct Energy Deposition-Arc (DED-Arc) process. Real-time resource usage data is integrated to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact. This facilitates the advancement of sustainable manufacturing practices.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.
Beim Unterpulverschweißen sind die Prozessgeräusche ein Indikator für eine gute Fügequalität. Diese Beurteilung kann i.d.R. nur von einer erfahrenen Fachkraft durchgeführt werden. Eine kürzlich entwickelte künstliche Intelligenz kann automatisch das akustische Prozesssignal anhand vortrainierter Merkmale klassifizieren und die Fügequalität anhand des Geräuschs beurteilen. Der Algorithmus, einmal richtig trainiert, kann den Prüfaufwand beim Unterpulverschweißen deutlich reduzieren.
Abstract
In the post-processing of large maritime components, a considerable amount of waste in the form of milling and grinding chips is produced. At the same time, additive manufacturing technologies have shown great potential in producing high-volume parts for maritime applications, allowing novel design approaches and short lead times. In this context, this study presents a sustainable approach to recycle and use aluminium bronze waste material, generated during post-processing of large cast ship propellers, as feedstock for laser-powder directed energy deposition. The recycling technology used to produce powder batches is inductive re-melting in combination with ultrasonic atomization. The derived metal powders are characterized using digital image analysis, powder flowability tests, scanning electron microscopy as well as energy dispersive X-ray spectroscopy. Compared to conventional metal powders produced by gas atomization, the recycled material shows excellent sphericity and a powder size distribution with a higher content of finer and coarser particles. Metallographic sections of deposited additively produced specimens show an increased hardness and reduced ductility, but also competitive densities and higher yield and ultimate tensile strength compared to cast material. The process chain shows high potential for the maritime sector to enable circular and sustainable manufacturing.
Die Additive Fertigung gewinnt zunehmend an Bedeutung für die Verarbeitung von Kupferwerkstoffen im industriellen Umfeld. Hierbei wird verstärkt auf drahtförmige Ausgangswerkstoffe gesetzt, da diese Vorteile im Handling bieten, bereits aus der Schweißtechnik bekannt sind und sich zumeist durch geringere Beschaffungskosten auszeichnen. In den letzten Jahren entwickelte sich unter den drahtbasierten Verfahren der Directed-Energy-Deposition (DED) eine Prozessvariante unter Nutzung des Elektronenstrahls zur industriellen Marktreife. Dabei zeigt die Technologie Wire Electron Beam Additive Manufacturing (DED-EB) besondere Vorteile gegenüber anderen DED-Prozessen für die Anwendung an Kupfer. Um das Verfahren einem breiten Anwenderkreis in der Industrie zugänglich zu machen, fehlen jedoch Daten zu Leistungsfähigkeit, Prozessgrenzen und Anwendungsmöglichkeit- en. Die vorliegende Untersuchung beschäftigt sich mit dieser Problemstellung am Beispiel der Legierung CuSn1MnSi. Über mehrstufige Testschweißungen werden die physikalisch möglichen Prozessgrenzen ermittelt und Rückschlüsse über die Eignung der Parameter zum additiven Aufbau gezogen. An verschiedenen additiv gefertigten Probekörpern werden anschließend Kennwerte für Aufbaurate, Härte, Mikrostruktur, Oberflächenqualität sowie mechanische Festigkeitswerte ermittelt. Es zeigt sich, dass das die durch DED-EB hergestellten Proben, trotz des groben Gefüges sowie der thermischen Belastung im Aufbauprozess, in ihren Eigenschaften gut mit den Spezifikationen des Ausgangsmaterials übereinstimmen.
Um Bauteile vor Verschleiß und Korrosion zu schützen werden Beschichtungen aus resistenteren Materialien aufgetragen. Hierzu zählen unter anderen die Legierungen auf Cobalt-Chrom Basis. Der diskrete Materialsprung ist jedoch unter thermischen und mechanischen Belastungen häufig Ursache für das Versagen der Beschichtung. In dieser Arbeit werden daher Materialgradierungen von verschiedenen Stahllegierungen zu einer Cobalt-Chrom Basislegierung untersucht. Die Ergebnissen werden dafür auch mit Resultaten zu vorangegangenen Untersuchungen verglichen. Kern der Arbeit bilden geätzte Schliffbilder der Materialpaarungen und Auswertungen mittels Farbeindringprüfung sowie die metallografische Bestimmung der Porosität. Ziel der Arbeit ist ein defektfreier Aufbau der funktional gradierten Materialpaarungen.
The present work deals with the recently confirmed widening of the weld pool interface, known as a bulging effect, and its relevance in high power laser beam welding. A combined experimental and numerical approach is utilized to study the influence of the bulge on the hot cracking formation and the transport of alloying elements in the molten pool. A technique using a quartz glass, a direct-diode laser illumination, a high-speed camera, and two thermal imaging cameras is applied to visualize the weld pool geometry in the longitudinal section. The study examines the relevance of the bulging effect on both, partial and complete penetration, as well as for different sheet thicknesses ranging from 8 mm to 25 mm. The numerical analysis shows that the formation of a bulge region is highly dependent on the penetration depth and occurs above 10 mm penetration depth. The location of the bulge correlates strongly with the cracking location. The obtained experimental and numerical results reveal that the bulging effect increases the hot cracking susceptibility and limits the transfer of alloying elements from the top of the weld pool to the weld root.
Liquid metal embrittlement (LME) cracking is a phenomenon observed during resistance spot welding (RSW) of zinccoated advanced highstrength steels (AHSS) in automotive manufacturing. In this study, severe cracks are observed at the edge of the sheet under reduced flange widths. These cracks, traversing the AHSS sheet, culminate at the edge with a width of approximately 1.2 mm.
Through combined numerical and experimental investigations, and material testing, these cracks are identified and validated as a new type of LME crack. The mechanism behind this crack formation is attributed to unique geometric conditions that, when compared to center welding, amplify radial material flow by ninefold to 0.87 mm. The resultant tangential tensile stresses approximate 760 MPa, which exceed the yield strength of the examined advanced highstrength steel (AHSS) under heightened temperature conditions, and when combined with liquid zinc, promote the formation of this new type of LME crack.
Eine typische Automobilkarosserie kann bis zu 5000 Widerstandspunktschweißverbindungen aufweisen, welche hohen Qualitätsanforderungen genügen müssen. Daher ist eine durchgehende Prozessüberwachung unerlässlich. Die Transformation zur E-Mobilität in der Automobilindustrie und die damit einhergehende Reichweitenproblematik treiben die Entwicklung und Einführung neuer hochfester Stähle an. Dies resultiert in einem gesteigerten Fertigungsaufwand hinsichtlich einer stabilen Prozess-führung in der Fügetechnik. Um diesen Anstieg an Komplexität zu bewältigen, sind die Methoden der künstlichen Intelligenz ein geeignetes Mittel. Mit ihnen kann, durch Auswertung der Prozessparameter und -signale, die individuelle Schweißpunktqualität sichergesellt werden. Die Vorhersagegenauigkeit von neuen Daten, also das extrapolieren, stellt für die meisten Algorithmen eine große Herausforderung dar.
In dieser Arbeit wird ein künstliches neuronales Netz zur Vorhersage des Punktdurchmessers von Widerstandspunktschweißungen anhand von Prozessparametern implementiert. Die Vorhersagegenauigkeit und Extrapolationsfähigkeit des Modells wird durch die Auswertung des dynamischen Widerstandssignals verbessert.
Um die Extrapolationsfähigkeit zu untersuchen, wird die Vorhersagegenauigkeit des Modells mit Daten getestet, die sich in Bezug auf den Werkstoff und der Beschichtungszusammensetzung deutlich von den Trainingsdaten unterscheiden. Dazu wurden mehrere Schweißexperimente mit Werkstoffen verschiedener Hersteller durchgeführt und nur ein Teil der Daten in das Training einbezogen. Die Ergebnisse dieser Arbeit verdeutlichen den positiven Einfluss der Prozesssignale auf die Robustheit des Modells und die Skalierbarkeit der Algorithmen
künstlicher neuronaler Netze auf Daten außerhalb des Trainingsraums.
Durch pulverbasiertes Directed-Energy Deposition lassen sich Gradierungen fertigen, um diskrete Materialübergänge zu vermeiden und die Lebensdauer von Hartschichten zu erhöhen. Die Kombination aus Stahl als Basiswerkstoff und einer verschleiß- und korrosionsbeständigen Co-Cr Legierung verspricht durch Vermeiden von Spannungskonzentrationen das Verhindern von Abplatzungen und Rissen in der Schutzschicht. Um die Qualität des gefertigten Bauteils zu beurteilen, liegen für solche Funktional Gradierten Materialien (FGM) wenig Erkenntnisse vor. Daher wird im Rahmen dieser Studie eine Methodik erarbeitet, um die relative Dichte eines Funktional Gradierten Materials auf Stahl und Co-Cr Basis mittels Maschinendaten zu bestimmen. Anschließend wird unter Einsatz eines künstlichen neuronalen Netzes anhand von Sensordaten die relative Dichte vorhergesagt. Das trainierte Netz erreicht eine Vorhersagegenauigkeiten von 99,83%. Abschließend wird eine Anwendung anhand von einem Demonstrator gezeigt.
New developments in nickel-based superalloys and production methods, such as the use of additive manufacturing (AM), can result in innovative designs for turbines. It is crucial to understand how the material behaves during the AM process to advance industrial use of these techniques. An analytical model based on reaction-diffusion formalism is developed to better explain the solidification behavior of the material during laser metal deposition (LMD). The well-known Scheil-Gulliver theory has some drawbacks, such as the assumption of equilibrium at the solid-liquid interface, which is addressed by this method. The solidified fractions under the Scheil model and the pure equilibrium model are calculated using CALPHAD simulations. Differential scanning calorimeter is used to measure the heat flow during the solid-liquid phase transformation, the result of which is further converted to solidified fractions. The analytical model is compared with all the other models for validation.
Im Additive Manufacturing Verfahren Directed Energy Deposition (DED) wird bei der Verarbeitung von Werkzeugstahl in der Regel reines Argon als Schutzgas verwendet. Dabei kann die Verwendung von speziellen Schutzgasgemischen, auch bei geringen Anteilen zugemischter Gase, durchaus die Bauteilqualität positiv beeinflussen.
In Vorarbeiten der Messer SE & Co. KGaA zeigte ein gewisser Sauerstoffanteil im Schutzgas die Tendenz, den Flankenwinkel von Schweißspuren beim DED zu verbessern. In der vorliegenden Studie wurde daher detailliert untersucht in wie weit unterschiedliche Schutzgasgemische einen Einfluss auf die Qualität sowie die geometrischen Eigenschaften der additiv gefertigten Strukturen des Werkzeugstahls 1.2709 beim Laser-DED ausüben. Es erfolgten zunächst Testschweißungen in Form von Einzelspuren mit unterschiedlichen Gemischen aus dem Basisschutzgas Argon mit geringen Anteilen verschiedener Gase. Dabei wurde der Einfluss der Zusätze auf die Spurgeometrie und Aufbauqualität untersucht. Auf Basis dieser Vorversuche wurde eine Auswahl vielversprechender Gasgemische getroffen und Detailuntersuchungen in Form von Spuren, Flächen und Quadern unter Zugabe verschiedener Mengen an Zusätzen durchgeführt. Zur Bewertung des Einflusses der Schutzgasbeimengungen wurden der Flankenwinkel, die Porosität und das Gefüge der Proben anhand metallografischer Schliffe untersucht. Es zeigte sich, dass eine Zugabe von geringen Anteilen an Zusätzen zunächst zu einer Vergrößerung des Flankenwinkels im Vergleich zu reinem Argon führt. Mit steigendem Anteil der Gase nimmt dieser Winkel jedoch ab. So kann je nach Menge des zugesetzten Gases eine individuelle Benetzung des aufgetragenen Materials an der Oberfläche erreicht werden. Auch die Porosität ließ sich durch Schutzgasgemische beeinflussen und zeigt ein abweichendes Verhalten im Vergleich zu reinem Argon.
In recent years, in addition to the commonly known wire-based processes of Directed Energy Deposition using lasers, a process variant using the electron beam has also developed to industrial market maturity. The process variant offers particular potential for processing highly conductive, reflective or oxidation-prone materials. However, for industrial usage, there is a lack of comprehensive data on performance, limitations and possible applications. The present study bridges the gap using the example of the high-strength aluminum bronze CuAl8Ni6. Multi-stage test welds are used to determine the limitations of the process and to draw conclusions about the suitability of the parameters for additive manufacturing. For this purpose, optimal ranges for energy input, possible welding speeds and the scalability of the process were investigated. Finally, additive test specimens in the form of cylinders and walls are produced, and the hardness profile, microstructure and mechanical properties are investigated. It is found that the material CuAl8Ni6 can be well processed using wire electron beam additive manufacturing. The microstructure is similar to a cast structure, the hardness profile over the height of the specimens is constant, and the tensile strength
and elongation at fracture values achieved the specification of the raw material.
Die Beschichtung hochfester Stahlfeinbleche beeinflusst das Auftreten von flüssigmetallinduzierter Rissbildung (LME). Daher wurden in dieser Arbeit industrieübliche Beschichtungen bei gleichem Grundwerkstoff hinsichtlich ihres Aufbaus und chemischer Zusammensetzung charakterisiert und bezüglich ihrer LME Anfälligkeit untersucht. Aus dieser vergleichenden Untersuchung heraus wurden Potentiale für die Widerstandsfähigkeit gegen LME identifiziert. Diese Potentiale werden experimentell durch den Einsatz einer von der Forschungsstelle entwickelten Methode überprüft. Gegenstand der Untersuchungen waren neben unbeschichteten Proben industrieübliche Zinküberzüge wie Elektrolytisch verzinkt, Feuerverzinkt, Galvannealed und Zink-Magnesium Beschichtungen.
Die LME Anfälligkeit dieser unterschiedlichen Überzüge wird mit einem Schweißen unter Zugbelastung Versuchsaufbau untersucht. Dabei ergibt sich die resultierende Anfälligkeit aus den auftretenden Risslängen und der Auftrittswahrscheinlichkeit von LME bei den einzelnen Versuchen. Es konnte eine LME Anfälligkeits-Rangfolge für die Zinküberzüge festgestellt werden. Zink-Magnesium Beschichtungen galten als besonders LME Anfällig, gefolgt von Feuerverzinkt und Galvannealed. Die größte LME Resistenz wurde bei elektrolytisch verzinkten Proben festgestellt.
Aus den Ergebnissen werden Handlungsempfehlungen zur Erhöhung der Verarbeitungssicherheit bzw. Schweißpunktqualität abgeleitet.
The application of anti-corrosion coated, high-strength steels in the automotive industry has increased in recent years. In combination with various zinc-based surface coatings, liquid metal embrittlement cracking can be observed in some of these materials. A high-quality, crack-free spot-welded joint is essential to realize the lightweight potential of the materials. In this work, the LME susceptibility of different coatings, which will be determined by the crack length and the occurrence rate, will be investigated using a welding under external load setup. The uncoated specimens did not show any LME. EG, GI and GA showed significantly less LME than ZM coatings. The latter coatings showed much larger crack lengths than the EG, GI and GA coatings. Furthermore, two mechanisms regarding the LME occurrence rate were observed: the occurrence of LME in zinc–magnesium coatings was theorized to be driven by the material properties of the coatings, whereas the occurrence of LME at EG, GI and GA samples was forced mainly by the application of the external tensile load.
In the experimental setup of this work, the materials were exposed to unusually high mechanical loads (up to 80% of their yield strength) to evoke LME cracks.
Der Einsatz von hochfesten Stählen im Karosseriebereich des Automobilbaus hat während der letzten Jahre stark zugenommen. Hierzu zählen Dual- und Komplexphasenstähle, welche durch Kombination unterschiedlicher Gefügebestandteile auch deren Vorteile kombinieren, sowie TRIP (TRansformation Induced Plasticity) und Mangan-Bor Stähle, welche sehr gute Umformeigenschaften mit hohen Festigkeiten durch Martensitbildung bei der Umformung kombinieren. TWIP (Twinning Induced Plasticity) Stähle erreichen ähnliche Effekte durch forcierte Zwillingsbildung.
Die Ursachen für den Einsatz dieser Stähle liegen in dem Potential dieser Materialien zur Gewichts- und Kostenreduzierung, bei gleichzeitiger Erhöhung der Fahrgastsicherheit. Auf Grund der prinzipiell gegebenen Schweißeignung dieser Stähle, werden die klassischen Fügeverfahren im Karosseriebau wie das kostengünstige und effektive Widerstandspunktschweißen, das Metall-Schutzgas (MSG)-Schweißen oder das Laserschweißen angewendet. Allerdings treten teilweise Herausforderungen, beispielsweise durch Gefügeveränderungen in den Fügestellen auf, die zu ungewollten Aufhärtungen oder Erweichungen führen.
In diesem Projekt wird ein Verfahren entwickelt, mit welchem die lokalen Werkstoffeigenschaften von im Automobilbau typischen Werkstoffen und deren Fügestellen bestimmt werden können. Relevante Kennwerte sind in erster Linie das SpannungsDehnungs-Verhalten der verschiedenen Zonen einer Schweißverbindung; relevante Zonen wiederum sind neben dem Grundwerkstoff die Wärmeeinflusszone und das Schweißgut. Zu diesem Zweck wird das Verfahren der instrumentierten Eindringprüfung für den Einsatz bei hochfesten Stählen weiterentwickelt. Zunächst werden hierzu Zugversuche an einfachen Grundwerkstoffgeometrien durchgeführt. Im Anschluss wird die optische Dehnungsfeldmessung an stark taillierten, geschweißten Zugversuchsproben durchgeführt.
Die Taillierung dient dem Zweck, die WEZ auch mittels WPS über den gesamten Querschnitt der Probe erzeugen zu können, bzw. im Versuch auch Dehnungen in den relevanten Bereichen herbeizuführen.
Das im Projekt angewendete Auswerteverfahren, welches auf nichtlinearen Regressionsmodellen in Form von künstlichen, neuronalen Netzwerken beruht, ermöglicht die Vorhersage des Festigkeitsverhaltens des Werkstoffes anhand der gemessenen Krafteindringwegdaten.