Wasserstoff
Filtern
Dokumenttyp
- Vortrag (210)
- Zeitschriftenartikel (63)
- Beitrag zu einem Tagungsband (31)
- Posterpräsentation (30)
- Forschungsbericht (4)
- Sonstiges (3)
- Buchkapitel (1)
- Dissertation (1)
Schlagworte
- Hydrogen (93)
- Wasserstoff (49)
- H2Safety@BAM (32)
- Safety (27)
- Welding (22)
- LH2 (20)
- Hydrogen Embrittlement (12)
- Standards (12)
- Structural health monitoring (12)
- Diffusion (11)
- Hydrogen assisted cracking (11)
- Schweißen (11)
- Sicherheit (11)
- Wasserstoffspeicher (11)
- Machine learning (10)
- Fügetechnik (9)
- Patents (9)
- Publications (9)
- Release (9)
- Explosionsschutz (8)
- Fire (7)
- Hollow Specimen Technique (7)
- Hydrogen embrittlement (7)
- Hydrogen safety (7)
- LNG (7)
- Pipeline (7)
- SensRef (7)
- Composite (6)
- Creep-resistant steel (6)
- Druckbehälter (6)
- Explosion protection (6)
- Fiber optic sensors (6)
- Forschung (6)
- Gassensorik (6)
- High-entropy alloy (6)
- Impact (6)
- MLI (6)
- Markthochlauf (6)
- Pipelines (6)
- SSRT (6)
- Spectroscopic ellipsometry (6)
- BLEVE (5)
- Bewertung (5)
- Gaseous hydrogen (5)
- ISO 3690 (5)
- Jet flame (5)
- Lebensdauervorhersage (5)
- Normung (5)
- Oxygen evolution reaction (5)
- Pressure vessel (5)
- QI-Digital (5)
- Research (5)
- Structural Health Monitoring (5)
- Studie (5)
- Submerged arc welding (5)
- Thermal radiation (5)
- Zerstörungsfreie Prüfung (5)
- Assessment (4)
- Carrier gas hot extraction (4)
- Composite pressure vessel (4)
- Electrochemical permeation (4)
- Geführte Ultraschallwellen (4)
- Hollow specimen (4)
- Hydrogen Storage (4)
- Hydrogen storage (4)
- Ignition source (4)
- Liquid Hydrogen (4)
- Mechanical properties (4)
- MefHySto (4)
- Mesoporous iridium oxide films (4)
- Monte-Carlo-Experiment (4)
- Non-destructive operando analysis (4)
- Pipeline steel (4)
- RPT (4)
- Review (4)
- Schallemissionsanalyse (4)
- Stainless steel (4)
- Tank (4)
- Technological innovation system (4)
- ATEX (3)
- Additive manufacturing (3)
- Ageing (3)
- Burst test (3)
- Delfin (3)
- Druck-Volumen-Produkt (3)
- Electrocatalysis (3)
- Erdgas (3)
- Faseroptische Sensorik (3)
- Freistrahlflamme (3)
- Fuel cell vehicles (3)
- Gefahrgut (3)
- High-pressure (3)
- Hohlzugprobe (3)
- Hollow specimen technique (3)
- Hydrogen economy (3)
- Hydrogen measurement (3)
- In-service (3)
- Konsequenzbegrenzung (3)
- LIBS (3)
- Leckdetektion (3)
- Metrologie (3)
- Metrologie zur Wasserstoffspeicherung (3)
- Metrology (3)
- Microstructure (3)
- ModuH2Pipe (3)
- Neutron imaging (3)
- Offshore (3)
- Post weld heat treatment (3)
- Pressure vessels (3)
- Quality Infrastructure (3)
- Regulations (3)
- Reparatur (3)
- Residual stresses (3)
- Risikosteuerung (3)
- Stress relief cracking (3)
- Structural Health Monitoring (SHM) (3)
- Technological innovation system (TIS) (3)
- Technology interaction (3)
- Thermal desorption analysis (3)
- Ultrasonic guided waves (3)
- Wasserstofftechnologien (3)
- Wärmestrahlung (3)
- Zündquellen (3)
- Acoustic emission (2)
- Akzeptanz (2)
- Alterung (2)
- Atmospheric Corrosion (2)
- COPV (2)
- Carbon fibre (2)
- Chemical Analysis (2)
- Component testing (2)
- Composite Overwrapped Pressure Vessel (2)
- Composites (2)
- Computed tomography (CT) (2)
- Condensed Matter Physics (2)
- Corrosion protecting system (2)
- Country comparison (2)
- Cryogenic tank (2)
- Damage localization (2)
- Degradation (2)
- Density data (2)
- Digitalisation (2)
- Digitalisierung (2)
- Distributed strain sensing (2)
- EMPIR (2)
- Ectrocatalysis (2)
- Energy carrier (2)
- Equation of state (2)
- Equations of state (2)
- Explosion safety (2)
- Fiber optic sensor (2)
- Fiber-reinforced plastics (2)
- Fuel Cells (2)
- Fuel cell (2)
- Gas detection (2)
- Gasanalytik (2)
- Gasausbreitung (2)
- Gaswolkenexplosion (2)
- Glass-ceramics (2)
- Graduate School (2)
- Guided Waves (2)
- Guided waves (2)
- H2 (2)
- Hazardous areas (2)
- High-Pressure Gaseous Hydrogen (2)
- High-pressure density (2)
- Hochdruck (2)
- Hochfest (2)
- Hydrogen Trade (2)
- Hydrogen transport in pipelines (2)
- Hydrogen trapping (2)
- Hydrogen-enriched natural gas (2)
- Ignition (2)
- Image analysis (2)
- Kaltrissprüfung (2)
- Katastrophe (2)
- Kavernenspeicher (2)
- Knowledge and Technology Transfer (2)
- Knowledge and technology transfer (2)
- Laboratory Container (2)
- Laser Doppler Vibrometer (2)
- Lebensdauerüberwachung (2)
- Liquid hydrogen (2)
- Liquid hydrogen (LH2) (2)
- Materialkompatibilität (2)
- Mechanical sparks (2)
- Mechanochemistry (2)
- Minimum burst ratio (2)
- Modalanalyse (2)
- Multiparameter sensing (2)
- Non-equilibrium thermodynamics (2)
- Process control (2)
- QI Digital (2)
- Rapid Phase Transition (2)
- Rapid phase transition (2)
- Repair Welding (2)
- Repair welding (2)
- Research and innovation (2)
- Residual stress (2)
- Schlagfunken (2)
- Seal (2)
- Sensor (2)
- Sensor testing (2)
- Sensorik (2)
- Sensors (2)
- Sicherer Umgang (2)
- Single-sinker densimeter (2)
- Stahl (2)
- Statistische Bewertung (2)
- Technological Innovation System (2)
- Technology Gap Theory (2)
- Tensile Test (2)
- Tiefkalt (2)
- ToF-SIMS (2)
- TransHyDE (2)
- Trapping (2)
- Trustworthy Hydrogen (2)
- Ultraschall (2)
- Verteilte faseroptische akustische Sensorik (2)
- Wassersoff (2)
- Wasserstofferzeugung (2)
- Wasserstofftankstelle (2)
- Weld metal (2)
- Werkstoffe (2)
- Wiederkehrende Prüfung (2)
- Zulassungskriterium (2)
- Zuverlässigkeit (2)
- pV-Produkt (2)
- µCT (2)
- 100Cr6 (1)
- 150 Jahre BAM (1)
- 9% Ni Steel (1)
- AISI 304L (1)
- ATEX rules (1)
- ATR Anerkanntes Technisches Regelwerk (1)
- Ab initio (1)
- Ab initio Simulation (1)
- Ab initio simulations (1)
- Absolute adsorption (1)
- Acceptance rate (1)
- Accidental scenarios (1)
- Acidic oxygen evolution reaction (1)
- Acids (1)
- Acoustic resonance (1)
- Additive Fertigung (1)
- Additive Manufacturing (1)
- Akzeptanzrate (1)
- Alternative Energieträger (1)
- Aluminosilicate glasses (1)
- Ammonia (1)
- Ammonia safety (1)
- Anaerobic pathways (1)
- Analytical calculation (1)
- Analytik (1)
- Anlagenbau (1)
- Application properties (1)
- Approval (1)
- Artificial intelligence (1)
- Artificial neural networks (1)
- Atemluftflaschen (1)
- Atomic and molecular physics, and optics (1)
- Atomic layer deposition (1)
- Atomistic model (1)
- Atomistic models (1)
- Auslegungsüberschreitend (1)
- Austenitic Stainless Steel (1)
- Austenitic Steels (1)
- Automatisierung (1)
- Automotive gases (1)
- Autonomous underwater vehicles (1)
- BAM-GGR 022 (1)
- BAM-Gefahrgutregel (1)
- BOFDA (1)
- BOTDA (1)
- Basic population (1)
- Batch test (1)
- Batch testing (1)
- Bauteilprüfung, -sicherheit und -zertifizierung (1)
- Bedarf (1)
- Bedeutung (1)
- Bergungsdruckgefäß (1)
- Berstfestigkeit (1)
- Berstversuch (1)
- Berufsgenossenschaft (1)
- Betrieb (1)
- Binary gas mixture (1)
- Bio-electrochemical (1)
- Biodeterioration and biodegradation (1)
- Biomaterials (1)
- Biotische/abiotische Faktoren (1)
- Borderline population (1)
- CCQM (1)
- CCQM-K (1)
- Carbide (1)
- Carbon fiber (1)
- Catalyst Layer (1)
- Ceramics and Composites (1)
- Certified reference materials (1)
- Classification (1)
- Cold (1)
- Cold Cracking (1)
- Cold cracking and welding (1)
- Commercial metal-organic frameworks (1)
- Competence Center (1)
- Competence center (1)
- Competence centre H2Safety@BAM (1)
- Complexity (1)
- Component (1)
- Component manufatcturing (1)
- Component test (1)
- Composite Overwrapped Pressure Vessels (1)
- Composite overwrapped pressure vessels (1)
- Composite pressure vessels (1)
- Composite-Druckbehälter (1)
- Composite-Druckgefäße (1)
- Compositionally complex alloy (1)
- Comprehensive study (1)
- Compression effect (1)
- Compression set (1)
- Conformity assessment (1)
- Consequence (1)
- Consequence limit (1)
- Consequences (1)
- Contamination (1)
- Conventional and Tubular Specimen (1)
- Corrosion (1)
- Corrosion Testing (1)
- Cr-Mo-V steel (1)
- Cracking (1)
- Creep resisting materials (1)
- Creep-resisting materials (1)
- Creep-resisting steel (1)
- Cross-cutting activities (1)
- Cross-cutting issues (1)
- Croyo-starage (1)
- Crygenic (1)
- Cryoadsorption (1)
- Cryoegenic storage vessel (1)
- Cryogenic Tank (1)
- Current results of the DELFIN project (1)
- Cyber security (1)
- Cyro storage tanks (1)
- DELFIN (1)
- DGUV (1)
- Data analytics (1)
- Data privacy (1)
- Database (1)
- Detonation (1)
- Deuterium (1)
- Diffusible hydrogen (1)
- Digital Calibration Certificate (1)
- Digital Certificates (1)
- Digital Traceability (1)
- Digital quality infrastructure (1)
- Digital twin (1)
- Digitale Transformation (1)
- Digitaler Produktpass DPP (1)
- Digitaler Zwilling (1)
- Digitalization (1)
- Dislocation cross slip (1)
- Distributed acoustic sensing (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fiber sensing (1)
- Distribution of relaxation times analysis (1)
- Druckgasspeicher (1)
- Druckgefäß (1)
- Druckgefäße (1)
- Druckspeicher (1)
- Duplex Stainless Steels (1)
- EBSD (1)
- Education (1)
- Electrocatalysts (1)
- Electrochemical catalysts (1)
- Electrochemical impedance spectra (1)
- Electrodialysis (1)
- Electrolysis (1)
- Electron microscopy (1)
- Electroosmosis (1)
- Embrittlement (1)
- Energiespeicherung (1)
- Energy Engineering and Power Technology (1)
- Energy Gases (1)
- Entropy Noise (1)
- Entropy-Nozzle Interaction (1)
- Erdgasinfrastruktur (1)
- Erdgasnetz (1)
- Etching (1)
- Explosion limits (1)
- Explosion pressure (1)
- Explosionsgrenzen (1)
- Explosionszonen (1)
- Explosive Mixtures (1)
- Faseroptik (1)
- Faseroptische Sensoren (1)
- Federated learning (1)
- Fehlervermeidung (1)
- Ferngasleitung (1)
- Ferritic steel (1)
- Feuersicherheit (1)
- Feuerwehr (1)
- Fibre-optic sensors (1)
- Filament winding (1)
- Fire ball (1)
- Flammability (1)
- Flammability classification (1)
- Flüssigwasserstoff (1)
- Foresight Prozess H2 (1)
- Forschungsbedarfe (1)
- Forschungslandschaft Wasserstoff (1)
- Forschungsnetzwerk Wasserstoff (1)
- Fragments (1)
- Free radicals (1)
- Fuel Gases (1)
- Fuel Technology (1)
- Functional safety (1)
- Funkgeräte (1)
- Fusion zone size (1)
- GTR 13 (1)
- Gas Reference Material (1)
- Gas analysis (1)
- Gas behaviour (1)
- Gas chromatography (1)
- Gas cloud explosion (1)
- Gas cylinders (1)
- Gas diffusion layers (1)
- Gas grid (1)
- Gas permeation (1)
- Gas purity (1)
- Gas sensor (1)
- Gas separation membranes (1)
- Gas storage (1)
- Gasdetektion (1)
- Gasdruckprüfung (1)
- Gases (1)
- Gasgualität (1)
- Gasreinheit (1)
- Gassensoren (1)
- Gasspeicher (1)
- Gefährdungs- und Risikobeurteilung (1)
- Geological Storage (1)
- Geology (1)
- Geothermal borehole (1)
- German National Alliance for Hydrogen Safety (1)
- Gesetzliche Aufgaben (1)
- Glass liner (1)
- Glasspeicher (1)
- Global hydrogen market (1)
- Graduiertenkolleg (1)
- Grain boundaries (1)
- Gravimetric preparation (1)
- Green Deal (1)
- Green Hydrogen (1)
- Gremienarbeit (1)
- Ground movement (1)
- H2-Abbau (1)
- H2-Tankstelle (1)
- H2HohlZug (1)
- H2Hohlzug (1)
- H2Safety@BAM.de (1)
- H2safety (1)
- HAZID (1)
- HT-PEFC (1)
- Hardness (1)
- Hasard assessment (1)
- Haydrogen Assisted Cracking (1)
- Hazard and risk assessment (1)
- Heat radiation (1)
- Heating rate (1)
- High Entropy Materials (1)
- High Pressure Gaseous Hydrogen (1)
- High pressure gas storage (1)
- High strength fine grained structural steels (1)
- High-Pressure Hydrogen (1)
- High-pressure Gaseous Hydrogen (1)
- High-pressure volumetric analyzer (HPVA) (1)
- High-strength steel (1)
- High-temperature polymer electrolyte membrane fuel cell (1)
- Highly permeably polynorbornenes (1)
- Hollow tensile specimen (1)
- Hollow-specimen (1)
- Hybrid Laser arc Welding (1)
- Hybrid metrology measurement (1)
- Hydraulischer Lastwechselversuch (1)
- Hydride formation (1)
- Hydrogen Fuelling Stations (1)
- Hydrogen Infrastructure (1)
- Hydrogen Metrology (1)
- Hydrogen Purity (1)
- Hydrogen Safety (1)
- Hydrogen Standards (1)
- Hydrogen Storage Materials (1)
- Hydrogen Strategy (1)
- Hydrogen Supply (1)
- Hydrogen accidents (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen analysis (1)
- Hydrogen and fuel cell technology (1)
- Hydrogen cryostorage (1)
- Hydrogen degradation (1)
- Hydrogen diffusion (1)
- Hydrogen enhanced vacancy formation (1)
- Hydrogen gas (1)
- Hydrogen gas sensor (1)
- Hydrogen in metals (1)
- Hydrogen infrastructure (1)
- Hydrogen market (1)
- Hydrogen permeation (1)
- Hydrogen policies (1)
- Hydrogen quality (1)
- Hydrogen refueling station (1)
- Hydrogen release (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen solubility in steels (1)
- Hydrogen storage tank (1)
- Hydrogen strategy (1)
- Hydrogen supply (1)
- Hydrogen technologies (1)
- Hydrogen technology (1)
- Hydrogen transport (1)
- Hydrogen uptake reproducibility (1)
- Hydrogen-containing gas mixture (1)
- Hydrogen-containing natural gas (1)
- Höherfeste Feinkornbaustähle (1)
- IT-OT-Testplattform (1)
- Ignition sources (1)
- Ignition temperature (1)
- Imaging (1)
- Impact Absorbed Energy (1)
- Impakt (1)
- In situ Raman (1)
- In situ X-ray diffraction (1)
- In-situ (1)
- In-situ tensile test (1)
- Indirect Combustion Noise (1)
- Industrial explosions (1)
- Industry 4.0 (1)
- Infractstructure (1)
- Infrastruktur (1)
- Innovation (1)
- Innovation system (1)
- Inspection (1)
- Insulation (1)
- Internal combustion engines (1)
- Ion-exchange membranes (1)
- Iridium oxide (1)
- Isolation (1)
- Japanese-German energy partnership (1)
- Jet-fires (1)
- Joining (1)
- Joining process (1)
- KI (1)
- KICstartH2 (1)
- Kaltriss und Schweißen (1)
- Kompetenzzentrum H2Safety@BAM (1)
- Kontamination von H2 (1)
- Künstliche Intelligenz (1)
- LTCC (1)
- Large-scale processing (1)
- Lastwechsel (1)
- Lattice Boltzmann simulation (1)
- Leakage detection (1)
- Lebenslaufakte (1)
- Liquified hydrogen (1)
- Litiumbatterien (1)
- Low-carbon (1)
- Lubricants (1)
- MIC (1)
- MOF databases (1)
- Machining (1)
- Marine Corrosion (1)
- Market Rump Up (1)
- Maschinelles Lernen (1)
- Mass transport (1)
- MatCom (1)
- Material properties and compatibility (1)
- Materialeignung und -kompatibilität (1)
- Materials compatibility (1)
- Mean burst pressure (1)
- Measurement (1)
- Measurement uncertainty (1)
- Mechanical Engineering (1)
- Mechanical impacts (1)
- Mechanischer Schlag (1)
- Messung (1)
- Metal foam microstructure (1)
- Metal organic frameworks (1)
- Metal-organic Framework (1)
- Metal-organic frameworks (1)
- Metal-organic frameworks (MOFs) (1)
- Metal-organic-frameworks (1)
- Metals (1)
- Metals and Alloys (1)
- Metals and alloys (1)
- Metal−organic frameworks (1)
- Methan (1)
- Microbial simulation, (1)
- Microbiologically influenced corrosion (1)
- Microcracks (1)
- Microporous Layer (1)
- Microstructure characterization (1)
- Mikroorganismen (1)
- Mini-UAV (1)
- Minimum Waiting Time (1)
- Minimum waiting time (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Modeling (1)
- ModuH2Pipe@BAM (1)
- Modulare Pipelineanlage (1)
- Monte-Carlo-Analysis (1)
- Monte-Carlo-Simulation (1)
- Monte-Carlo-simulation (1)
- Multi-sample analysis (1)
- Multidimensional hydrogen technology adoption (1)
- Multidimensional technology adoption (1)
- Multiple principal element alloy (1)
- Multiple-principal element alloy (1)
- NAMUR Open Architecture (1)
- NDT (1)
- Nanomaterials (1)
- Natural gas (1)
- Net zero (1)
- Neutron (1)
- Neutron imaging techniques (1)
- Neutron radiography (1)
- Non-destructive testing (1)
- Offshore steel grade (1)
- Online-Monitoring (1)
- Operational Technology (1)
- Optische Fasern (1)
- Organic products (1)
- Overview (1)
- Oxygen reduction reaction (1)
- PEM-Wasserelektrolyse (1)
- PSA (1)
- Packing density (1)
- Perspektiven (1)
- Phosphoric acid (1)
- Physical and theoretical chemistry (1)
- Physics and Astronomy (miscellaneous) (1)
- Platinum-free catalyst (1)
- Policies (1)
- Polymer Electrolyte Membrane Fuel Cell (1)
- Polymer electrolyte membrane fuel cell (1)
- Polymers of intrinsic microporosity (1)
- Population (1)
- Population density (1)
- Porous materials (1)
- Post-weld heat treatment (1)
- Power to Gas (1)
- Power-to-Gas (1)
- Practical application (1)
- Pre-charging (1)
- Predictive maintenance (1)
- Pressure recepacles (1)
- Pressure wave (1)
- Pressure-dependent solubility (1)
- Prevention (1)
- Probabilistik (1)
- Probengeometrie (1)
- Process and plant safety (1)
- ProcessNet (1)
- Production scatter (1)
- Project QI Digital: Quo vadis Use Case H2 Refuelling Station? (1)
- Proof test (1)
- Properties (1)
- Proton conducting materials (1)
- Proton exchange membrane fuel cells (1)
- Prozess- und Anlagensicherheit (1)
- Prozesse (1)
- Prozessindustrie (1)
- Prüffristenfestlegung (1)
- Prüfung (1)
- Prüfverfahren (1)
- Push and pull effects (1)
- Qualitative results (1)
- Quality infrastructure (1)
- Quality management tool (1)
- Qualitätsinfrastruktur (1)
- Quantiative results (1)
- Quantitative Risikoanalyse (1)
- Quasielastic neutron scattering (1)
- RED (1)
- Radiography (1)
- Rapid gas decompression (1)
- Regel- und Messtechnik (1)
- Regelsetzung (1)
- Regelwerke (1)
- Regulations codes and standards (RCS) (1)
- Reliabillity (1)
- Renewable Energy (1)
- Renewable Energy, Sustainability and the Environment (1)
- Reparaturschweißen (1)
- Research and Development (1)
- Resistance (1)
- Rettungskräfte (1)
- Reversible Hydrogen Storage (1)
- Risikoanalyse (1)
- Risk Assessment (1)
- Risk control (1)
- Risk-based design (1)
- Roughness (1)
- Rubber sealing (1)
- Rückverstromung (1)
- SHM (1)
- Safe handling (1)
- Safety Related Properties (1)
- Safety assessment (1)
- Safety challenges (1)
- Safety measures (1)
- Sample Performance Chart (1)
- Sauerstoff (1)
- Scanning kelvin probe force microscopy (1)
- Schadenverhütung (1)
- Schweißverbindung (1)
- Sea Water (1)
- Sediment (1)
- Sensor Placement (1)
- Sensor network (1)
- Sensor response (1)
- Sensoren (1)
- Sensorik, Analytik und Referenzmaterialien (1)
- Sensors Placement (1)
- Sensors and analytics (1)
- Sicherheit von Wasserstofftechnologien (1)
- Sicherheitsbewertung (1)
- Sicherheitsmanagement (1)
- Sicherheitstechnische Eigenschaften (1)
- Sieverts’ law (1)
- Simulation (1)
- Skilled workers (1)
- Slow strain tensile tests (1)
- Social acceptance (1)
- Soft-templated mesoporous films (1)
- Solubility (1)
- Sondervorschrift 674 (1)
- Spectral intensity (1)
- Speed of sound (1)
- Standardisation (1)
- Standardization (1)
- Standortvorteil (1)
- Steel (1)
- Stichprobenprüfung (1)
- Strain and temperature measurements (1)
- Streuung (1)
- Structure activity relationships (1)
- Structure health monitoring (1)
- Strukturüberwachung (1)
- Study (1)
- Supercritical adsorption (1)
- Surfaces, Coatings and Films (1)
- Sustainability and the Environment (1)
- Syngas (1)
- Technologie (1)
- Technologies (1)
- Temperature (1)
- Temperature calibration (1)
- Tensile Strength (1)
- Tensile Testing (1)
- Tensile loading (1)
- Tensile test (1)
- Test area (1)
- Test area hydrogen safety (1)
- Test procedure (1)
- Testinfrastruktur (1)
- Testing (1)
- The upper consequence limit as a control instrument (1)
- Thermische Belastung (1)
- Thermodynamic modelling (1)
- Thin mesoporous films (1)
- Time-of-Flight Mass Spectrometry (1)
- Tomography (1)
- Transformation of LNG terminals (1)
- Transport gefährlicher Güter (1)
- Transport number (1)
- Tribologie (1)
- Trustworthy hydrogen (1)
- Trägergasheißextraktion (1)
- Tubular specimen technique (1)
- Twin-screw extrusion (TSE) (1)
- UN-Modellvorschriften (1)
- Ultrasonic Guided Waves (1)
- Uncertainty (1)
- Underground gas storage (UGS) (1)
- Unfallszenarien (1)
- Unterirdische Speicher (1)
- Uptake estimation (1)
- Use-Case Wasserstofftankstelle (1)
- Verbundwerkstoffe (1)
- Verflüssigt (1)
- Versuchsplattform (1)
- Verteilte faseroptische Sensoren (1)
- Vertrauen (1)
- Vertrauen in Wasserstofftechnologien (1)
- Verwaltungsschale (1)
- Virial coefficients (1)
- Volumenbegrenzung (1)
- Volumetric uptake (1)
- Waiting time (1)
- Wasserstoff Café (1)
- Wasserstoff Hydrogen (1)
- Wasserstoff Referenzmaterial (1)
- Wasserstoff-Druckbehälter (1)
- Wasserstoff-Qualität (1)
- Wasserstoff-Wirtschaft (1)
- Wasserstoffanalytik (1)
- Wasserstoffbindungsverhalten (1)
- Wasserstoffdegradation (1)
- Wasserstoffdiffusion (1)
- Wasserstofflagerung (1)
- Wasserstoffsicherheit (1)
- Wasserstoffspeicherung (1)
- Wasserstoffstrategie (1)
- Wasserstofftransport in Pipelines (1)
- Waste heat (1)
- Water Distribution (1)
- Water electrolysis (1)
- Weld joint (1)
- Werkstoff (1)
- Werkstoffkompatibilität (1)
- Wind energy (1)
- Wind turbine (1)
- X-ray CT (1)
- X-ray tomography (1)
- ZIF-8 (1)
- Zertifikat (1)
- Zuständige Behörde (1)
- Zündenergie (1)
- Zündquelle (1)
- modulare Pipelineanlage (1)
- statistische Bewertung (1)
- zertifizierte Referenzmaterialien (1)
- Überlebenswahrscheinlichkeit (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (101)
- 3 Gefahrgutumschließungen; Energiespeicher (95)
- 9.0 Abteilungsleitung und andere (76)
- 3.5 Sicherheit von Gasspeichern (75)
- 2 Prozess- und Anlagensicherheit (65)
- 2.1 Sicherheit von Energieträgern (63)
- 8 Zerstörungsfreie Prüfung (59)
- 9.4 Integrität von Schweißverbindungen (46)
- 1 Analytische Chemie; Referenzmaterialien (34)
- 1.4 Prozessanalytik (33)
Paper des Monats
- ja (4)
The key for a transition into clean energy sources is based on the construction of safe energy infrastructure, such as transportation pipelines for Hydrogen. Duplex Stainless Steels (DSS) are an essential component used nowadays in the construction of transportation pipelines because of their many distinctive qualities. The choice of DSS for a particular hydrogen application mainly depends on its susceptibility level to Hydrogen Embrittlement (HE) or Hydrogen Assisted Cracking (HAC). Since the 20th century, the literature indicates three factors that must be considered: the microstructure of the alloy steel, the hydrogen concentration, and the mechanical load. Several mechanisms have been also proposed to describe the occurring microscale processes behind HE or HAC, and these include metastable phase transformation, Hydrogen Enhanced Localized Plasticity (HELP), and Hydrogen Enhanced Decohesion (HEDE).
The following contribution describes the path to ascertain if DSS is suitable for high-pressure gaseous hydrogen applications. The interplay between several critical factors that result in HAC was examined using high-pressure gaseous hydrogen charging, Electron Backscatter Diffraction (EBSD), and hydrogen concentration measurements using Carrier Gas Hot Extraction (CGHE). It was determined whether the strain-induced martensitic transformation of the austenite was present in a DSS 1.4462 (DSS2205) in-service pipe and in samples of freshly charged DSS 1.4462. In comparison to the common electrochemical charging described broadly in the literature, no major direct martensitic phase transformation of the austenite phase under a high-pressure hydrogen environment was observed. As for future experiments, the intention is to analyse the impact of high-pressure gaseous hydrogen on the welded components of this grade, and under mechanical load via the hollow specimen technique.
To accelerate the transition to a low-carbon economy while exploiting existing infrastructure, hydrogen can be injected to the natural gas network. However, many technical and regulatory gaps should be closed, and adaptations and investments made to ensure that multi-gas networks across Europe will be able to operate in a reliable and safe way while providing a highly controllable gas quality and required energy demand. The SHIMMER project aims to enable a higher integration and safer hydrogen injection management in multi-gas networks by contributing to the knowledge and better understanding of hydrogen projects, their risks, and opportunities.
For industrial applications dealing with hydrogen, the definition of safety distances and the assessment of possible hazards emanating from releases is mandatory. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the momentum driven release of hydrogen from a leakage with subsequent ignition. In this scenario, the emitted heat radiation from the resulting jet flame to the surroundings has to be determined to define adequate safety distances. For hydrocarbon flames, different jet flame models are available to assess the hazards resulting from an ignited jet release. Since hydrogen flames differ from hydrocarbon flames in their combustion behavior, it has to be checked if these models are also applicable for hydrogen. To evaluate the accuracy of these models for hydrogen jet flames, tests at real-scale are carried out at the BAM Test Site for Technical Safety (BAM-TTS). Herein, the flame geometry and the heat radiation at defined locations in the surroundings are recorded for varying release parameters such as leakage diameter (currently up to 30 mm), release pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s). The challenge here is the characterization of the flame geometry in an open environment and its impact on the thermal radiation. Existing heat radiation data from the literature are mostly based on unsteady outflow conditions. For a better comparability with the steady state jet flame models, the experiments presented here are focused on ensuring a constant mass flow over the release duration to obtain a (quasi) stationary jet flame. In addition, stationary outflow tests with hydrocarbons (methane) were also carried out, which are intended to serve as reference tests for checking flame models based on hydrocarbon data.
Hydrogen gas plays a key role in the European energy transition strategy. When transmitting and storing compressed hydrogen gas, safety is one of the most important conditions. With increasing hydrogen pressure and temperature, more hydrogen is absorbed by the steel components, such as pipelines or valves, and may lead to embrittlement. Although, a deep understanding of microstructure on the hydrogen solubility in steels is missing. Classical Sieverts’ law is only valid at high temperatures and low gas pressures. For that purpose, new theory is presented, which explains the role of microstructure on hydrogen solubility. Hydrogen trapping at microstructural defects is a thermally activated mechanism and causes an increase of the hydrogen solubility with decreasing temperatures. This mechanism has to be considered in cryogenic applications, such liquid or compressed hydrogen storage.
The injection of hydrogen into the natural-gas grid is an alternative during the process of a gradual decarbonization of the heat and power supply. When dealing with hydrogen-enriched natural gas mixtures, the performance of the reference equations of state habitually used for natural gas should be validated by using high-precision experimental thermophysical data from multicomponent reference mixtures prepared with the lowest possible uncertainty in composition. In this work, we present experimental density data for an 11-compound high-calorific (hydrogen-free) natural gas mixture and for two derived hydrogen-enriched natural gas mixtures prepared by adding (10 and 20) mol-% of hydrogen to the original standard natural gas mixture. The three mixtures were prepared gravimetrically according to ISO 6142–1 for maximum precision in their composition and thus qualify for reference materials. A single-sinker densimeter was used to determine the density of the mixtures from (250–350) K and up to 20 MPa. The experimental density results of this work have been compared to the densities calculated by three different reference equations of state for natural gas related mixtures: the AGA8-DC92 EoS, the GERG-2008 EoS, and an improved version of the GERG-2008 EoS. While relative deviations of the experimental density data for the hydrogen-free natural gas mixture are always within the claimed uncertainty of the three considered equations of state, larger deviations can be observed for the hydrogen-enriched natural gas mixtures from any of the three equations of state, especially for the lowest temperature and the highest pressures.
The hollow specimen technique is a simple and economical method
that has the potential to overcome the limitations and complement
the current techniques for qualifying metallic materials under highpressure
hydrogen gas.
In this technique, an axial hole is manufactured in a tensile
specimen, which is then filled with hydrogen gas, sealed, and
placed in a standard testing machine. This method requires
significantly lower amounts of hydrogen, resulting in fewer safety
measures and does not require complex equipment or a specialised
laboratory, unlike the conventional autoclave technique.
Initial studies have demonstrated the feasibility of assessing
hydrogen effects in metallic materials using the hollow specimen
technique. This led to the establishment of the committee ISO/TC
164/SC 1/WG 9 to standardise the method, however, there are still
open questions that currently prevent the technique from being
standardised for hydrogen testing. These open questions are being
addressed in the H2HohlZug project, which is presented in this
contribution.
The use of hydrogen demands high safety requirements, since hydrogen can be absorbed by metallic materials and may cause hydrogen embrittlement (HE) under certain conditions. Slow strain rate (SSR) tensile testing is a widespread method to quantify the hydrogen-induced ductility loss of alloys. Here, the hollow specimen technique was used to evaluate the effect of 150 bar hydrogen on the tensile properties of solution annealed and hardened 100Cr6 steel, which is a common material for bearing systems. This technique reduces the required amount of hydrogen and minimizes the duration and costs of the tests performed compared to in-situ tensile tests in autoclaves.
The growing demand for hydrogen requires an expansion of testing capabilities to assess the performance of metallic materials under hydrogen exposure. Considering only gaseous atmospheres, there is a variety of in-situ and ex-situ methods used to investigate the material behavior while or after exposed to hydrogen, respectively.
Among these methods, a more conservative one is the in-situ testing at slow strain rates (SSRT) using conventional tensile specimens. While results obtained by a conservative procedure may be more applicable in many cases than those of ex-situ experiments, the tests are quite demanding, leading to limited testing capacities and high costs, especially for very slow strain rates. A possible solution that can enable in-situ testing at relatively low cost is the hollow specimen technique which gained increasing interest in the last decade. The main reasons are the minimal volume of hydrogen required and the elimination of a high-pressure hydrogen autoclave leading to significantly lower costs and enabling more laboratories worldwide to perform these tests. However, interpreting results from hollow specimens, especially when compared to conventional ones, remains a significant challenge.
To address this, an experimental study was conducted using conventional and hollow specimens, both uncharged and pre-charged. Pre-charging was achieved using pure hydrogen (5.0, i.e. 99.999 %) at 100 bar and 300 °C for around 21 days. In order to obtain suitable reference specimens, other specimens were stored in argon at 100 bar and 300 °C for the same period of time. The tests were performed at various strain rates, down to 1E-6 1/s.
While these ex-situ experiments are not directly comparable to in-situ tests with both types of specimens, they do provide some insights into the differences between the results of hollow and conventional specimens. Therefore, the elongation at fracture and reduction of area (RA) were compared, among other aspects. In addition, fractographical analyses were carried out using SEM images. Elongation at fracture was not significantly affected by hydrogen in conventional specimens, but it was slightly reduced in hollow specimens. RA, on the other hand, was lower for tests with hydrogen in both types of specimens across all strain rates. Moreover, the strain rate did not appear to influence hydrogen embrittlement in conventional specimens whereas in hollow specimens, tests conducted at higher strain rates (1E-4 1/s) showed a greater impact of hydrogen on elongation at fracture than those at lower strain rates (1E-6 1/s), which is contrary to the typical expectation.
These findings suggest that the influence of hydrogen differs between conventional and hollow specimens, possibly due to factors such as surface roughness and differing stress states. However, further experiments are needed to fully understand these differences, including in-situ experiments to understand potential differences in hydrogen absorption between the two specimen types.
Wasserstoff als Energieträger gewinnt zunehmend an Bedeutung. Die Untersuchung von Störfallauswirkungen mit Wasserstoff rückt somit stärker in den Fokus. Da Wasserstoff meist unter Druck gelagert und transportiert wird, ist ein zu betrachtendes Szenario die Freisetzung aus einer Leckage mit anschließender Zündung. Die daraus resultierende Freistrahlflamme (Jet Flame) muss hinsichtlich der in die Umgebung emittierten Wärmestrahlung charakterisiert werden. In der Literatur existieren bereits verschiedene Modelle ([1], [2]), welche jedoch vermehrt auf Daten aus Kohlenwasserstoffflammen mit geringem Impuls basieren. Zur Überprüfung dieser Modelle wird im Zuge des BAM internen H2 Jet Flame Projektes die sicherheitstechnische Untersuchung von impulsbehafteten Wasserstoff Freistrahlflammen vorgenommen. Hierfür finden Versuche im Realmaßstab auf dem Testgelände Technische Sicherheit der BAM (BAM-TTS) statt. Gegenstand der Untersuchungen ist die Beurteilung der Auswirkungen von realistischen Freisetzungsszenarien hinsichtlich der Flammengeometrie und der freigesetzten Wärmestrahlung. Dabei werden Parameter wie Freisetzungswinkel, Leckagedurchmesser (z.Zt. 1 mm bis 10 mm), Druck (z.Zt. bis max. 250 bar) und Massenstrom (bis max. 0,5 kg/s) variiert. Zusätzlich können auch Einflüsse wie Art der Zündung, Zündort sowie Zündung mit zeitlichem Verzug untersucht werden. Gewonnene Erkenntnisse werden mit den Ergebnissen bereits vorhandener Modelle verglichen und diese im Bedarfsfall weiterentwickelt. Insbesondere wird der Fokus auf die Modellierung der freigesetzten Wärmestrahlung von Wasserstoffflammen gelegt. Herausforderung dabei stellt die IR-Vermessung und Modellierung von Sichtmodellen der Flammen dar. Die Visualisierung der Flammengeometrie wird mit Hilfe mehrerer Infrarot Kamerasystemen (aus mindestens zwei Blickwinkeln) vorgenommen.
Bisherige Messungen, die in der Literatur zu finden sind, basieren meist auf instationären Auströmbedingungen. Der hier verwendete Versuchsaufbau ermöglicht ein stationäres Ausströmen für mehrere Minuten und somit eine direkte Vergleichbarkeit mit den existierenden (stationären) Modellen.
Weiterhin ist der Versuchsstand umrüstbar für Vergleichsmessungen mit Kohlenwasserstoffen (Methan etc.) sowie Mischungen aus Wasserstoff und Kohlenwasserstoffen.
For industrial applications dealing with hydrogen, the definition of safety distances and the assessment of possible hazards emanating from releases is mandatory. Since hydrogen is usually stored and transported under pressure, one scenario to be considered is the momentum driven release of hydrogen from a leakage with subsequent ignition. In this scenario, the emitted heat radiation from the resulting jet flame to the surroundings has to be determined to define adequate safety distances. For hydrocarbon flames, different jet flame models are available to assess the hazards resulting from an ignited jet release. Since hydrogen flames differ from hydrocarbon flames in their combustion behavior, it has to be checked if these models are also applicable for hydrogen. To evaluate the accuracy of these models for hydrogen jet flames, tests at real-scale are carried out at the BAM Test Site for Technical Safety (BAM-TTS). Herein, the flame geometry and the heat radiation at defined locations in the surroundings are recorded for varying release parameters such as leakage diameter (currently up to 30 mm), release pressure (currently up to max. 250 bar) and mass flow (up to max. 0.5 kg/s). The challenge here is the characterization of the flame geometry in an open environment and its impact on the thermal radiation. Existing heat radiation data from the literature are mostly based on unsteady outflow conditions. For a better comparability with the steady state jet flame models, the experiments presented here are focused on ensuring a constant mass flow over the release duration to obtain a (quasi) stationary jet flame. In addition, stationary outflow tests with hydrocarbons (methane) were also carried out, which are intended to serve as reference tests for checking flame models based on hydrocarbon data.
Hydrogen-enriched natural gas, H2NG is a mixture of natural gas and H2 that can be used on existing natural gas infrastructure with little or even no modification to be applied H2NG is thus an option in the transition from fossil fuels to a hydrogen economy, as it can reduce greenhouse gas emissions and can accelerate the adoption of H2 from renewable sources. Theoretically, H2 can be mixed with NG in any ratio, but H2NG mixtures with up to 20 vol-% of H2 represent the most realistic near term option due to technical and economic reasons. The addition of H2 to natural gas alters the thermodynamic properties of the mixture, which affects its transport, storage, and combustion characteristics. In this work, we present experimental density measurements for different H2NG mixtures, performed with a high-precision single sinker densimeter from 250 to 350 K and up to 20 MPa. The mixtures were prepared gravimetrically according to ISO 6142-1 for maximum precision in their composition.
Modern high-pressure H2 tanks consist of fiber-reinforced composite materials and a plastic lining on the inside. The use of glass would drastically increase the H2 barrier effect. This could be achieved with glass liners or fiber-reinforced polymer-bonded glass capillary storage tanks and would enable lower wall thicknesses, higher gravimetric storage densities and variable designs and thus a much more effective use of space.
However, the decisive material parameters for the development of these technologies, such as the hydrogen permeation, are unknown. This study focuses on H2 diffusion in glasses of different chemical compositions.
H2 permeation is measured by mass spectrometry. For this purpose, the mass spectrometer (MS), which is located in a high vacuum, is separated from the pressure side by the test specimen. Pure H2 gas is present on the pressure side, so that the mass flow is recorded qualitatively and quantitatively in the MS. The permeation coefficients are calculated from the sample geometry and the mass flow rates. The very low H2 permeation of glass is measured on bundles of thin-walled commercially available glass capillaries and compared with the hydrogen permeation data of the glass powder method.
Non-Destructive Testing (NDT) of type 4 composite pressure vessels can be seen as key to better understanding the behaviour of the composite structure and the impact of the manufacturing process on its quality. In this presentation, NDT methods used in the “Trustworthy Hydrogen” project are introduced. A brief discussion of the observed phenomena is provided.
Distributed fiber optic sensing (DFOS) technique is a promising and robust non-destructive testing tool that can seamlessly acquire environmental conditions over large scales. Therefore, it has found extensive applications in structural health monitoring. Its appeal for monitoring underground facilities lies in the intrinsic properties of the optical fiber, such as immunity to magnetic interference, small size, chemical inertia, etc. This paper provides a concise overview of DFOS applications in underground facility monitoring. Following a brief introduction to the workingbnprinciple of the DFOS technique, various examples are provided to demonstrate how distributed fiber sensors contribute to monitoring underground facilities. The paper presents unpublished field test results with an emphasis in the energy sector, including monitoring gas storage facilities, geothermal reservoir exploration, and ground movement detection. Furthermore, the paper identifies several directions for enhancing the DFOS system.
Hydrogen will be one of the most important energy carriers of tomorrow. For the necessary large-scale and long-distance transportation, a reliable pipeline infrastructure is required. It is meanwhile in the most countries accepted to follow a two-way strategy by (I) repurposing the existing natural gas (NG) grid combined with (II) the installation of new pipelines. For example, in Europe a so-called European Hydrogen Backbone (EHB) is planned for 2040. Currently, 28 countries work together to establish a hydrogen pipeline grid of several thousands of kilometers. In that connection, a wide number of materials are used with different thicknesses, strength levels, chemical composition, surface conditions and so on. Worldwide research projects suggest the general compatibility of the currently applied pipeline steels e.g., in Germany the “SysWestH2” project. Nonetheless, the hydrogen gas grid will require regular inspections, repair, and maintenance. In addition, sometimes pipeline tees are required to connect new grids or pipelines the existing infrastructure. From that point of view, existing concepts from NG-grids must be investigated in terms of the transferability to hydrogen service. An overview on occurring challenges for this hydrogen transition, especially for in-service weld repair procedures is given in this presentation.
Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels
(2024)
We report on the development and testing of 70 MPa hydrogen pressure
vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading.
Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels
(2024)
We report on the development and testing of 70 MPa hydrogen pressure vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading.
Hydrogen pressure vessels are among the most essential components for reliable hydrogen technology. Under current regulations, a mostly conservative strategy is employed, restricting the usage time of hydrogen pressure vessels without providing information on the real remaining lifetime. During the service life, pressure vessels are inspected periodically. However, no established method that can provide continuous monitoring or information on the remaining safe service life of the vessel. In this paper, we propose a sensor network for Structural Health Monitoring (SHM) of hydrogen pressure vessels where data from all sensors are collected and centrally evaluated. Specifically, we integrate three different SHM sensing technologies namely Guided Wave ultrasonics (GW), Acoustic Emission testing (AT), and distributed Fiber Optic Sensing (FOS). This integrated approach offers significantly more information and could therefore enable a transition from costly and time-consuming periodic inspections to more efficient and modern predictive maintenance strategies, including Artificial Intelligence (AI)-based evaluation. This does not only have a positive effect on the operational costs but enhances safety through early identification of critical conditions in the overall system in real-time. We demonstrate an experimental set-up of a lifetime test where a Type IV Composite Overwrapped Pressure Vessel (COPV) is investigated under cyclic loading instrumented with AT, FOS, and GW methods. We acquired data from the sensor network until the pressure vessel failed due to material degradation. The data collected using the three different SHM sensor technologies is planned to be evaluated individually, using data fusion, and AI. In the future, we aim to integrate the measurement setup into a hydrogen refueling station with the data stream implemented into a digital signal processing chain and a digital twin.
The transition toward a hydrogen-based economy requires a widespread transport and distribution network, and repurposed natural gas pipelines are a viable option. An assessment of the hydrogen-induced degradation of pipeline steels is needed to inject H2 gas into the existing infrastructure safely. The conservative and standardized method consists of in-situ tensile tests in an autoclave filled with high-pressure hydrogen gas. A proposed alternative method involves
using a hollow specimen as containment volume and applying the gas pressure in the inner cavity.
This technique has lower costs and shorter test preparation time but is not standardized yet. This study aims to evaluate and compare the tensile properties of API 5L X65 pipeline steel in two states: vintage and modern. The influence of the surface roughness is investigated through parallel tests with drilled and reamed specimens. Hydrogen tests are compared with reference tests in an inert environment. A significant hydrogen-induced decrease in tensile properties is observed, and no significant difference between vintage and modern X65 can be drawn. The reduction in tensile properties is more significant in specimens with higher inner surface roughness. The evaluation of surface conditions appears crucial when assessing the HE susceptibility of hydrogen transport and storage equipment.
Structural health monitoring of hydrogen pressure vessels using distributed fiber optic sensing
(2024)
We report on distributed fiber optic sensing-based monitoring of hydrogen composite overwrapped pressure vessels (COPV) to simultaneously increase the operational lifespan and mitigate maintenance costs. Our approach represents, to the best of our knowledge, the first application of distributed fiber optic sensing for COPV Type IV monitoring, where the sensing fibers are attached to the surface, rather than integrated into the composite material. Specifically, we attach an optical fiber of 50 m to the pressure vessel's surface, covering both the cylindrical and dome sections. We note that our fiber optic sensing technique relies on swept wavelength interferometry providing strain information along the entire length of the optical fiber with high spatial resolution even at the millimeter scale. When the vessel is pressurized, the sensing optical fiber shows a linear strain response to pressure at every position along the fiber. After thousands of load cycles, the vessel finally fails with the optical fiber detecting and precisely localizing the damage in the vessel’s blind dome area. Furthermore, we discuss the potential of state-of-the-art signal processing methods and machine learning for advancing predictive maintenance. This could reduce the number of regular inspections, mitigate premature maintenance costs, and simultaneously increase the vessel’s remaining safe service life. We believe that the structural health monitoring of hydrogen pressure vessels with fiber optic sensors can enhance trust in hydrogen technology contributing to the energy transition in the future.