3.5 Sicherheit von Gasspeichern
Filtern
Dokumenttyp
- Vortrag (12)
Referierte Publikation
- nein (12)
Schlagworte
- H2Safety@BAM (12) (entfernen)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (12)
- 3.5 Sicherheit von Gasspeichern (12)
- 2 Prozess- und Anlagensicherheit (4)
- 2.1 Sicherheit von Energieträgern (4)
- 8 Zerstörungsfreie Prüfung (2)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (2)
- 1 Analytische Chemie; Referenzmaterialien (1)
- 1.4 Prozessanalytik (1)
- 5 Werkstofftechnik (1)
- 5.4 Multimateriale Fertigungsprozesse (1)
Eingeladener Vortrag
- nein (12)
Ein Aspekt des Gefahrguttransportes, der an Bedeutung in den letzten Jahren zugenommen hat, ist die Versorgung von Wasserstofftankstellen und anderen H2-Großverbrauchern über die Schiene aber insbesondere über die Straße.
Mit Blick auf die primäre Form der Speicherung wird der Begriff der Sicherheit über den Aspekt der Häufigkeit eines definierten Ereignisses erläutert und auf die Besonderheiten der Druckgefäße aus Verbundwerkstoffen hingewiesen, wie auch den regulatorischen Hintergrund der Lebensdauerüberprüfung nach 15 Jahren nach den Vorgaben der zuständigen Behörde. In Deutschland sind diese Vorgaben in der BAM-Gefahrgutregel 021 geregelt, die in der GGR 022 durch eine Regelung zur Wiederkehrenden Prüfung dieser Umschließungen ergänzt wird.
Beide BAM-Gefahrgutregeln basieren auf einem probabilistischen Ansatz und einer Konsequenzabschätzung über das Druck-Volumen-Produkt der Druckgefäße. Die neu im Recht verankerte EN 17339 ist die erste Norm, die speziell fest montierte Compositespeicher für den Wasserstofftransport regelt. Sie ermöglicht eine erhebliche Gewichtreduktion und führt eine Obergrenze für das Druckvolumen ein.
Es wird kurz erläutert, dass gerade mit Blick auf Wasserstofftransporte über eine Arbeitsgruppe der Vereinten Nationen eine Begrenzung des Konsequenzpotentials in das internationale Recht eingeführt werden soll und welche Kriterien bei der systematischen Ermittlung des akzeptierten Wertes von 1.5 Mio bar Liter Einfluss haben.
Mit Blick auf die Energiewende sieht es die BAM als besonders wichtig an, die Transportkosten zu senken, indem der Prüfaufwand reduziert und gleichzeitig die Erkenntnistiefe aus der betrieblichen Überwachung verbessert wird. Hierzu muss die Datenbasis für die probabilistische Bewertung der Lebensdauer von zerstörenden Prüfungen auf zerstörungsfreie Prüfungen umgestellt werden und idealerweise die 100% Prüfung zumindest in der ersten Hälfte des sicheren Lebens auf Stichproben reduziert werden.
Dies und andere Aufgaben, die wichtig für eine sichere und attraktive Wasserstoffwirtschaft sind werden von dem Kompetenzzentrum H2Safety@BAM bearbeitet, dass in seinen Grundzügen kurz vorgestellt wird.
Der Beitrag beinhaltet Themen vom H2Safety@BAM-Kompetenzfeld Sensorik, Analytik und zertifizierte Referenzmaterialien (SensRef) mit Fokus auf Mess- und Prüfverfahren mit verschiedenen Sensortechnologien und Ultraschallwellen:
Metrologie zur Wasserstoffspeicherung - Euramet-Vorhaben "MefHySto",
Erkennung von freigesetztem Wasserstoff sowie die Bestimmung des Wasserstoff-Luftverhälntisses mit Gassensoren, zerstörungsfreie Fehlstellenerkennung mit integriertem Zustandsüberwachungssystem basierend auf geführten Ultraschallwellen zur Lebensdauerüberwachung von Composite-Behältern (Wasserstoffspeicher) sowie faseroptische Sensorik zur Schadenfrüherkennung von Wasserstoffspeichern aufgrund erkennbarer Dehnungsänderungen an Druckbehältern.
Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To be able to achieve the targets defined by 2045, the EU and the German government have drafted a framework for action and are making long-term investments in research, development and the rapid implementation of innovative hydrogen technologies.
The conditions for a successful energy transition and the economic use of green hydrogen as a clean energy carrier are Hydrogen readiness and a rapid market ramp-up, as well as the establishment of the necessary value chains in the national and European framework. Reliable quality and safety standards are the prerequisite for ensuring safety of supply and environmental compatibility and for creating trust in these technologies.
BAM has bundled its expertise in the field of hydrogen technologies into a competence center H2Safety@BAM to create confidence in the technology and to support the hydrogen strategies of the German government and the EU. The topic of hydrogen has been current at BAM for more than one hundred years and is also currently the focus of numerous research and cooperation activities. The competence centre H2Safety@BAM and its vision of “We build trust in hydrogen technologies” will be presented with its many safety-related topics, which can be found throughout the entire hydrogen value chain. Two deep dives will present the results on projects dealing with the design-to-cost issue of classical pressurized gas storage containments and the consequences of the release of liquid hydrogen, which will be roughly compared to the release of ammonia.
Markthochlauf von Wasserstoff - probabilistische Sicherheitsbewertung von Speichern und Normen
(2021)
Der Foliensatz beginnt mit der Kurzvorstellung des Kompetenzzentrums H2Safety@BAM und weiteren Informationen zum Kompetenzfeld MatCom. Danach werden die Erwartungen der EU zum Wasserstoffverbrauch vorgestellt und visualisiert, wie Risikosteuerung bei stark wachsender Technik funktionieren kann, und welchen zeitlichen Vorlauf man für die Einführung von neuen Zulassungsanforderungen benötigt. Der Begriff Sicherheit wird über den Risikobegriff definiert und am Beispiel quantifiziert. Danach werden verschiedene Werkzeuge vorgestellt, die dazu geeignet sind, die Risikosteuerung im Markthochlauf zu realisieren: Die statistische Bewertung von Stichproben, die probabilistische Bewertung von Populationen, die Lebensdauervorhersage von Populationen. Dies führt weiter zum Gedanken eines probabilistischen Zulassungsansatzes und zum Potential Monte-Carlo-Experimentes in der Bewertung der Wirkung von deterministischen Baumusterprüfkriterien. All dies sind Themen, die nach Meinung des Vortragenden Zukunftsprojekte der Normung sein sollten, um ein Werkzeug zu erhalten, das auch weitgehend ohne produktspezifische Erfahrung geeignet ist, Sicherheit in einer H2-Gesellschaft zu gewährleisten.
Der Vortrag stellt das Kompetenzzentrum H2Safety der BAM vor und zeigt Aspekte besonderer Kompetenz des Zentrums mit Blick auf das Kompetenzfeld TestCert.
Beginnend mit dem H2-Unfall auf dem Tempelhofer Feld in 1894 wird dargestellt welche Bedeutung Sicherheitsfragen zu Wasserstoff für das Kompetenzzentrum H2Safety haben. Danach wird die Struktur und die Arbeitsschwerpunkte erläutert und die verantwortlichen Personen kurz vorgestellt. Das Kompetenzfeld TestCert wird vertieft erläutert und hier auf das Spektrum der wissenschaftlichen und technischen Dienstleistungen hingewiesen. Darauf aufbauend werden die statistischen Aspekte eines Markthochlaufes wie auch die der Streuung einer Population und deren Alterung dargelegt. Zuletzt kommt der Hinweis auf das Potential der Bewertung von Baumusterprüfkriterien mithilfe der Monte-Carlo-Simulation.
The introduction reflects the political background in Germany and worldwide concerning hydrogen as energy carrier. This leads to available hydrogen strategies and the reaction of BAM by launching the competence centre H2Safety@BAM. Fokus is set on the competence area TestCert, the special role of the division “Safety of Gas Storage Systems” there and its increasing success in research activities.
The main part explains the needs for a risk-controlled market ramp-up concerning hydrogen products and appropriate measures being under development in division 3.5: risk control, tools for consequence estimation and limitation, probabilistic assessment of end of safe life, the efficiency assessment and optimization of current regulations, the structural health monitoring (SHM) with necessary improvement of measures for quality management in the digital world of safety assessment. Last but not least, the wide range of full-scale testing and simulation of worst-case scenarios is explained.
Green hydrogen is seen as a cornerstone of the energy transition and decarbonization efforts of industry, transportation and the utilities sectors. The binding goal of the EU and Germany to reduce net zero carbon emissions by 2045 will substantially increase the demand for green hydrogen as an important carbon-free substitute for fossil fuels. The World Energy Council expects an annual demand of 60 million tons (equivalent 2.000 TWh) hydrogen and its derivatives (especially ammonia and methanol) in the EU until 2050. lt is estimated that the EU can produce less than half of its needed hydrogen by 2050, and will need to import the rest. African coastal countries therefore have the opportunity to become net exporters of their carbon-free regenerative energy in the form of hydrogen and its derivatives and to enable better economic growth and generate wealth on the African continent. The large-scale production, transport and storage of green hydrogen will require large investments in the development of knowledge and training, logistics and capital goods - for both the EU and African countries.
BAM is already facing the lack of skilled workers and hydrogen experts. By bundling its expertise in the field of hydrogen technologies into a competence center H2Safety@BAM to create confidence in the technology The topic of hydrogen has been current at BAM for more than one hundred years and is also currently the focus of numerous research and cooperation activities. In order to transfer its expertise in this field BAM developed a number of education activities. The centre of all activities is the Graduate School “Trustworthy Hydrogen”, established in 2022 together with the BTU Cottbus. In the presentation all activities and especially those of the graduate school and details of the cooperation with the University of Namibia are shown.
Competence Centre H2Safety@BAM – Safeguarding the Quality Infrastructure in the Hydrogen Economy
(2022)
Hydrogen is a central component of the energy transition and the European Green Deal for a climate-neutral Europe. To achieve the goals defined for 2050, the EU and the German government have developed a framework for action and are making long-term investments in research, development, and the rapid implementation of innovative hydrogen technologies.
With the Competence Centre "H2Safety@BAM", BAM is creating the safety-related prerequisites for the successful implementation of hydrogen technologies at national as well as European level.
To this end, BAM conducts research, testing and consulting in a holistic and inter-disciplinary manner under one roof – in the Competence Centre H2Safety@BAM. The activities of the competence centre focus on ensuring the safety of infra-structures, plants, and processes as well as innovative hydrogen transport and storage systems based on digital quality testing and the experimental testing of components and systems. It thus creates the prerequisites for the implementation and adaptation of legal framework conditions as well as for standardization. Closely related to this are investigations into the properties and compatibility of metallic materials and polymers as well as friction systems for the safe operation of components, plants, processes, and systems. This interdisciplinary and holistic approach is complemented by the development of gas analytics and suitable sensors, online measurements of gas properties in process control, test scenarios under real conditions as well as impact assessments of accidents and risk assessments and risk management systems derived from them. With its portfolio of tasks and competences, BAM builds trust in the safety and reliability of technical system solutions for hydrogen.
The Gases Advisory Group is organized regularly by the Prevention Division of the German Employer's Liability Insurance Association for Raw Materials and the Chemical Industry. The event serves as an exchange between science and industry on current safety-related issues concerning oxygen and hydrogen. In this context, BAM presented an overview of its various activities of the competence center H2Safety@BAM, which are reflected in the entire hydrogen value chain. In addition, the plans for the expansion of the test infrastructure at BAM's Technical Safety Test Site were presented. The results of the DELFIN project on the safety of pressurized gas storage tanks, the release tests of liquid hydrogen as well as the underfiring of corresponding cryogenic storage tanks and the plans for the ModuH2Pipe@BAM project were also presented. The presentation concluded with the current recommendations of the Hydrogen Research Network.
Dr Mair presents the competence centre “H2Safety@BAM”. He starts with a spectacular hydrogen accident on the Tempelhofer Feld (Berlin) in 1894, comes to the foundation of the competence centre in the context of the hydrogen strategies of Germany and the EU and explains their safety-focused orientation in order to create and maintain confidence in hydrogen technologies.
Beyond the long-term changes in energy supply, in Sept. 2022 there are enormous cost leaps in gas supply, which puts hydrogen as an energy carrier in a different light.
Based on this, he presents the structure of the Competence Centre with its 5 competence areas and the corresponding contact persons. This is underpinned by a slide on each of the work packages in the fields of competence.
At the end of the presentation, he explains the focus of the competence area "Component Testing, Component Safety and Approval", for which he is responsible. This is the question of cost reduction by using the whole potential of digitalisation in connection with the safety surveillance of the storage systems. The run of a fully digital system is of great importance for both, for the hydrogen supply of large consumers via road and rail and for storage systems in stationary plants. A robust and well-thought-out digitalisation in all levels of documentation will lead to a new quality in monitoring safety porperties, integration of new components and cost reduction.
Der Vortrag stellt das Kompetenzzentrum H2Safety der BAM vor und zeigt Aspekte besonderer Kompetenz des Zentrums mit Blick auf das Kompetenzfeld TestCert.
Beginnend mit dem H2-Unfall auf dem Tempelhofer Feld in 1894 wird dargestellt welche Bedeutung Sicherheitsfragen zu Wasserstoff für das Kompetenzzentrum H2Safety haben. Danach wird die Struktur und die Arbeitsschwerpunkte erläutert und die verantwortlichen Personen kurz vorgestellt. Das Kompetenzfeld TestCert wird vertieft erläutert und hier insbesondere auf Sicherheitsaspekte des Markthochlaufes hingewiesen. Darauf aufbauend werden die statistischen Aspekte eines Markthochlaufes wie auch die der Streuung einer Population und deren Alterung dargelegt. Zuletzt kommt der Hinweis auf das Potential der Bewertung von Baumusterprüfkriterien mithilfe der Monte-Carlo-Simulation.
Die Präsentation ist der Startschuss für die Wasserstoffkolloquien der BAM. Sie beginnt mit Adolf Martens und zeigt den Weg vom Foresight-Prozess Wasserstoff bis zum Kompetenzzentrum H2Safety@BAM. Es werden die Kompetenzfelder vorgestellt und die handelnden Personen. Dies leitet über zu den drei Vorträgen des Tages und den Vortragenden.