Nano
Filtern
Dokumenttyp
- Zeitschriftenartikel (347)
- Vortrag (338)
- Posterpräsentation (100)
- Forschungsdatensatz (50)
- Sonstiges (20)
- Beitrag zu einem Tagungsband (16)
- Buchkapitel (10)
- Beitrag zu einem Sammelband (10)
- Forschungsbericht (9)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (6)
Sprache
- Englisch (870)
- Deutsch (52)
- Spanisch (2)
- Mehrsprachig (1)
Schlagworte
- Nanoparticles (124)
- Nano (70)
- SAXS (64)
- XPS (60)
- Laser-induced periodic surface structures (LIPSS) (59)
- Fluorescence (53)
- Quantum yield (51)
- Electron microscopy (48)
- Nanoparticle (46)
- X-ray scattering (46)
- SEM (40)
- Nanomaterial (39)
- Quality assurance (39)
- Lifetime (35)
- VAMAS (35)
- HAXPES (33)
- Dye (32)
- Particle size distribution (30)
- Particle (29)
- Sensor (28)
- Nanomaterials (27)
- Lanthanide (26)
- Photophysics (25)
- MOUSE (24)
- Surface functionalization (24)
- Standardisation (23)
- Graphene (22)
- Photoluminescence (22)
- Synthesis (22)
- Method (21)
- Reference material (21)
- Simulation (20)
- Small-angle X-ray scattering (20)
- X-ray photoelectron spectroscopy (20)
- AFM (19)
- Interlaboratory comparison (19)
- NIR (19)
- Boehmite (17)
- Nanocomposites (17)
- Quantum dots (17)
- Reference materials (17)
- Sample preparation (17)
- Thin films (17)
- Traceability (17)
- Geant4 (16)
- Imaging (16)
- Laser processing (16)
- NanoSolveIT (16)
- Nanocomposite (16)
- Upconversion nanoparticle (16)
- Inter-laboratory comparison (15)
- Surface chemistry (15)
- Functionalized graphene (14)
- Metrology (14)
- Microdosimetry (14)
- Upconversion (14)
- Applications (13)
- Dosimetry (13)
- Femtosecond laser (13)
- Geant4-DNA (13)
- Luminescence (13)
- MCS (13)
- OECD (13)
- Quantum dot (13)
- SWIR (13)
- Scattering (13)
- DNA (12)
- EDS (12)
- Ellipsometry (12)
- Optical spectroscopy (12)
- Polymer (12)
- Quantitative spectroscopy (12)
- Conductivity (11)
- EBSD (11)
- Nanostructures (11)
- Particle size (11)
- Size (11)
- Surface analysis (11)
- Brightness (10)
- Energy transfer (10)
- Femtosecond laser ablation (10)
- Integrating sphere spectroscopy (10)
- LEE (10)
- Mechanism (10)
- Radiation damage (10)
- Small angle scattering (10)
- Standardization (10)
- TiO2 (10)
- Atomic force microscopy (9)
- AuNP (9)
- Broadband dielectric spectroscopy (9)
- Epoxy (9)
- Friction (9)
- Gold (9)
- Methodology (9)
- Microstructures (9)
- Monte-Carlo simulation (9)
- Oxygen evolution reaction (9)
- Quantification (9)
- Radioactive decay (9)
- Silica (9)
- Surface (9)
- Wear (9)
- Energy deposit (8)
- Nanoconfinement (8)
- Protein (8)
- Rigid amorphous fraction (8)
- Spectroscopic ellipsometry (8)
- Additive manufacturing (7)
- Advanced materials (7)
- Automation (7)
- Cancer treatment (7)
- Coating (7)
- DNA damage (7)
- Excitation power density (7)
- FIB (7)
- Flash DSC (7)
- Ionic Liquid crystals (7)
- Ligand (7)
- Monte-Carlo simulations (7)
- Nanoplastics (7)
- Nanostructure (7)
- Radiationtherapy (7)
- Reference data (7)
- Shape (7)
- Single particle (7)
- Spectroscopy (7)
- TEM (7)
- TOPAS (7)
- Titania nanoparticles (7)
- ToF-SIMS (7)
- Uncertainty (7)
- Advanced Materials (6)
- Assay (6)
- Beta decay (6)
- Brachytherapy (6)
- Calibration (6)
- Cell (6)
- Flow cytometry (6)
- G5P (6)
- Glass (6)
- Gold Nanoparticles (6)
- Indium phosphide (6)
- Lab automation (6)
- Laser ablation (6)
- Laser-induced periodic surface structures, LIPSS (6)
- Low energy electrons (6)
- Measurement uncertainty (6)
- Multiplexing (6)
- NP (6)
- Nano powder (6)
- Nanoplastic (6)
- Particle scattering simulations (6)
- Prüfrichtlinie (6)
- Radiation therapy (6)
- Radiolysis (6)
- Reproducibility (6)
- Small-angle scattering (6)
- TOPAS-nbio (6)
- Temperature (6)
- VSSA (6)
- Adsorbed Layer (5)
- Analysis (5)
- Application (5)
- Bacteria (5)
- Biofilm (5)
- Cancer (5)
- Carbon nanotubes (5)
- Characterization (5)
- Core-shell (5)
- Data analysis (5)
- Dynamics (5)
- EPMA (5)
- Ectoine (5)
- Elastomers (5)
- Elemental composition (5)
- Environment (5)
- ISO/TC 202 (5)
- LLG (5)
- Mesoporous iridium oxide films (5)
- Micromagnetism (5)
- Microscopy (5)
- Multiphoton lithography (5)
- Nanocrystal (5)
- Nanoparticle concentration (5)
- Nanosafety (5)
- Nanotechnology (5)
- OH radical (5)
- OOMMF (5)
- Oxidation (5)
- Particle scattering (5)
- Polycarbonate (5)
- Risk assessment (5)
- Rubber (5)
- Semiconductor quantum dot (5)
- Sensing (5)
- SiO2 (5)
- Single-stranded DNA-binding proteins (5)
- Software (5)
- Surfaces (5)
- Topas (5)
- X-ray (5)
- XRD (5)
- nPSize (5)
- 2D materials (4)
- 3D (4)
- Advanced manufacturing (4)
- BDS (4)
- Bacterial adhesion (4)
- Barcoding (4)
- Bead (4)
- Bending modulus (4)
- Bio-SAXS (4)
- Bioimaging (4)
- Calcium sulfate (4)
- Capillary waves (4)
- Catalysis (4)
- Certification (4)
- Clustered nanoparticles (4)
- Corrosion (4)
- Cosolute (4)
- Crystallization (4)
- DLS (4)
- Data (4)
- Data stewardship (4)
- Diffraction (4)
- Direct laser writing (4)
- EC4SafeNano (4)
- Ectoin (4)
- Encoding (4)
- Epoxy nanocomposites (4)
- Exchange interaction (4)
- Fast Scanning Calorimetry (4)
- Ferromagnetism (4)
- GVP (4)
- Glass transition (4)
- Guideline (4)
- Hard X-ray photoelectron spectroscopy (HAXPES) (4)
- ISO/TC 229 (4)
- Image analysis (4)
- Image segmentation (4)
- InP (4)
- Instrumentation (4)
- Introduction (4)
- Ionic liquid (4)
- Ionizing radiation damage (4)
- Iron oxide (4)
- Iron oxide nanoparticles (4)
- Knowledge Readiness Level (4)
- Landau Lifshitz equation (4)
- Life sciences (4)
- Livermore model (4)
- Magnetic moment (4)
- McSAS3 (4)
- Microbeam Analysis (4)
- Microbeam analysis (4)
- Microstructure (4)
- Modelling (4)
- NEXAFS (4)
- Nano@BAM (4)
- NanoDefine (4)
- Nanoelectronics (4)
- Nanofibers (4)
- Nanomaterial classification (4)
- Nanopartikel (4)
- Non-destructive operando analysis (4)
- Nucleation (4)
- OH radical scavenger (4)
- Object oriented micromagnetic framework (4)
- Optical assay (4)
- Orientation (4)
- PDF (4)
- Penelope model (4)
- Polymers (4)
- Probe (4)
- Protein unfolding (4)
- Radiotherapy (4)
- Reference product (4)
- Regulation (4)
- Round robin (4)
- Signal enhancement (4)
- Size distribution (4)
- Standard (4)
- Stochastic Landau Lifshitz Gilbert equation (4)
- Strategic Research Agenda (SRA) (4)
- Surface modification (4)
- Synchrotron (4)
- TMDSC (4)
- Thickness (4)
- Titanium dioxide (4)
- Transmission electron microscopy (4)
- Two-photon polymerization (4)
- Ultrashort laser processing (4)
- particle scattering (4)
- ssDNA (4)
- AIS (3)
- Aggregation (3)
- Aging (3)
- Analytical sciences (3)
- Antibacterial (3)
- Atomic Force Microscopy (3)
- Automated synthesis (3)
- BAM reference data (3)
- BioSAXS (3)
- Biofilm formation (3)
- CLS (3)
- Cement (3)
- Ceria (3)
- Contact resonance (3)
- Core-shell nanoparticles (3)
- Correlative analysis (3)
- Correlative imaging (3)
- Cycloalyphatic epoxy oligosiloxane (3)
- Cytotoxicity (3)
- Differential scanning calorimetry (3)
- Electrochemistry (3)
- Electromagnetic scattering (3)
- Electron Microscopy (3)
- Electrospinning (3)
- Energy dispersive X-ray spectroscopy (3)
- European Centre (3)
- European Metrology Network (EMN) (3)
- Extracellular vesicles (EV) (3)
- FTIR (3)
- Femtosecond laser processing (3)
- Framework (3)
- Free electron laser (3)
- General Materials Science (3)
- Gold nanocluster (3)
- Graphene oxide (3)
- Graphene related 2D materials (3)
- Growth Kinetics (3)
- Hard-energy X-ray photoelectron spectroscopy (3)
- Hybrid metrology (3)
- ISO (3)
- ISO/TC 229 Nanotechnologies (3)
- Immunoassay (3)
- Intermodulation AFM (3)
- Interpenetrating polymer network (3)
- Interphase (3)
- LIPSS (3)
- Laboratory automation (3)
- Laboratory management (3)
- Limit of detection (3)
- Linearity (3)
- Lubricants (3)
- MOF (3)
- Machine Learning (3)
- Machine learning (3)
- Magnetic nanoparticles (3)
- Mechanical properties (3)
- Method comparison (3)
- Method development (3)
- Micro- and nanoplastics (3)
- Microprinting (3)
- Modeling (3)
- Monte Carlo (3)
- NAP-XPS (3)
- NMR (3)
- Nano particle (3)
- Nano-powder (3)
- Nanomaterialien (3)
- Nanopipettes (3)
- Nanostructure quantification (3)
- OH Radical (3)
- OH radicals (3)
- Optical assays (3)
- Particle Synthesis (3)
- Photocatalysis (3)
- Pollutant (3)
- Polyglycerol (3)
- Porosity (3)
- Porous materials (3)
- Processing (3)
- Protein G (3)
- Proteins (3)
- Python (3)
- Quantitative NMR (3)
- ROS (3)
- Radical Scavenger (3)
- Ratiometric sensors (3)
- Resonance frequency (3)
- Rigidity (3)
- SAXS/WAXS (3)
- SEM/EDS (3)
- SOP (3)
- Safe-by-Design (3)
- Scattering pattern analysis (3)
- Semiconductor (3)
- Sensors (3)
- Shell (3)
- Small-angle xray scattering (3)
- Stability (3)
- Standards (3)
- Surface chemical analysis (3)
- Surface group analysis (3)
- Surface group quantification (3)
- Test guideline (3)
- Thin Films (3)
- Ti6Al4V alloy (3)
- Time-resolved scattering (3)
- Topas-MC (3)
- Topas-nBio (3)
- Toxicology (3)
- Transmission Kikuchi Diffraction (TKD) (3)
- Tribology (3)
- Ultrafast laser processing (3)
- Ultrashort laser pulses (3)
- Upconversion nanocrystal (3)
- Upconversion nanoparticles (3)
- Validation (3)
- X-ray Photoelectron Spectroscopy (3)
- beta particle (3)
- nanoparticle (3)
- pH probe (3)
- pH sensing (3)
- 100Cr6 (2)
- 150th anniversary (2)
- 2D Materials (2)
- 2PP (2)
- 3D Fourier Transform (2)
- 3D printing (2)
- ABC (2)
- ACEnano (2)
- APTES (2)
- Absolute fluorescence (2)
- Achsschenkel (2)
- Adsorption (2)
- Advanced Manufacturing (2)
- Advanced nanomaterials (2)
- Affinity chromatography (2)
- Agglomerates (2)
- Aktivkohle (2)
- Amorphous silica particles (2)
- Amplification (2)
- Amyloid (2)
- Anodization (2)
- Antibody (2)
- Antibody coating (2)
- Au (2)
- Automated image analysis (2)
- Automatisation (2)
- BAM (2)
- BET (2)
- Bacterial adhesion tests (2)
- Base damage (2)
- Base loss (2)
- Behavior and Systematics (2)
- Beta particle (2)
- Bio-based concrete (2)
- Bioconjugation (2)
- Biofilm growth (2)
- Biosensor (2)
- Bruchmechanische Auslegung (2)
- Bundesanstalt für Materialforschung und -prüfung (2)
- Bundesoberbehörden (2)
- CEN/TC 352 Nanotechnologies (2)
- Case studies (2)
- Catalysts (2)
- Cathodoluminescence (2)
- CeO2 (2)
- Cell studies (2)
- Ceramics and Composites (2)
- Characterisation (2)
- Chemical admixtures (2)
- Chemical analysis (2)
- Chemical composition (2)
- Cleavable probe (2)
- Cluster (2)
- Coatings (2)
- Collection (2)
- Commercial graphene (2)
- Comparison (2)
- Complex (2)
- Composites (2)
- Concentration (2)
- Concrete (2)
- Conductometry (2)
- Convolutional neural networks (2)
- Correlative Imaging (2)
- Cr(III) (2)
- Cribellate spiders (2)
- Crosslinker (2)
- DNA radiation damage (2)
- Data conversion (2)
- Data curation (2)
- Data fitting (2)
- Data organization (2)
- Decision support (2)
- Desintegracion radioactiva (2)
- Diagnosis (2)
- Dielectric Spectroscopy (2)
- Dielectric spectroscopy (2)
- Diopside (2)
- Direct damage (2)
- Direct laser interference patterning (DLIP) (2)
- Direct laser-interference patterning (DLIP) (2)
- Discotic Liquid Crystals (2)
- Dispersion process (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Double-strand break (DSB) (2)
- Dynamic Light Scattering (2)
- EDX (2)
- EMN (2)
- EMPIR (2)
- EMPIR 18HLT01 MetVesII (2)
- ESCA (2)
- EU FP7 project NanoValid (2)
- Ecology (2)
- Ectrocatalysis (2)
- Electrocatalysis (2)
- Electrolysis (2)
- Elektronenmikroskopie (2)
- Engineered Nanomaterials (2)
- Enhancement strategy (2)
- European Metrology Networks (EMNs) (2)
- Evolution (2)
- Excitation (2)
- FAIR (2)
- FFT (2)
- FLIM (2)
- Fail-safe (2)
- Fast scanning calorimetry (2)
- Fe3O4 (2)
- FeNi (2)
- FeNi-Oxide NPs (2)
- Film thickness (2)
- Finite-difference time-domain calculations (2)
- Flame retardancy (2)
- Flow cytometry (FCM) (2)
- Fluorescence standard (2)
- Fluorescent particles (2)
- Fluoride (2)
- Force distance curve (2)
- Fourier Transform (2)
- Fourier transforms (2)
- Functionalization (2)
- Funtional Groups (2)
- Gallium doping (2)
- Gene five protein (2)
- Glue (2)
- Graphene inks (2)
- Graphene oxide flakes (2)
- Graphene powder (2)
- Graphitization (2)
- HDF5 (2)
- Halloysite nanotubes (2)
- Hard x-ray photoelectron spectroscopy (2)
- Herceptin (2)
- Hierarchical micro-nanostructures (2)
- High resolution (2)
- Holistic experimental procedures (2)
- Holistic experimentation (2)
- Holistic science (2)
- Homogeneity (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration (2)
- Hydration shell (2)
- Hydrogen evolution reaction (2)
- Hydroxyectoine (2)
- Hydroxyl radical (2)
- ICP-MS (2)
- IgG (2)
- Immunoassays (2)
- Immunocapture (2)
- Immunoglobulins (2)
- Immunoprecipitation (2)
- Immunosensor (2)
- In-situ (2)
- Indirect damage (2)
- Industrial applications (2)
- Instrument calibration (2)
- Interfaces (2)
- Interlaboratory Comparison (2)
- Interlaboratory Comparisons (2)
- Ionic Liquid Crystals (2)
- Ionisation (2)
- Ionization (2)
- Jahrestag (2)
- Kerbschlagarbeit (2)
- Kikuchi (2)
- Korrelation (2)
- Korrosion (2)
- Latex (2)
- Lattice parameters (2)
- Layer-by-layer deposition (2)
- Ligands (2)
- Lubrication (2)
- Material sciences (2)
- Measurement data conversion (2)
- Mesoporous (2)
- Metal cluster (2)
- Metal organic framework (2)
- Metals and Alloys (2)
- Method validation (2)
- Microanalysis (2)
- Microfluidics (2)
- Micropatterning (2)
- Microplastic (2)
- Microplastics (2)
- Molecularly Imprinted Polymers (2)
- Monitoring (2)
- Morphology (2)
- Multi photon lithography (2)
- Multilayer graphene (2)
- Multiphoton Lithography (2)
- Método de Montecarlo (2)
- NXsas (2)
- Nano- and microsensors (2)
- Nano-safety (2)
- Nanocarrier (2)
- Nanocharacterisation (2)
- Nanofasern (2)
- Nanoindentation (2)
- Nanomechanics (2)
- Nanometrology (2)
- Nanopulver (2)
- Nanorisk (2)
- Nanosensor (2)
- Nanostructure investigation (2)
- Natural rubber (2)
- NeXus (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Neural networks (2)
- Neutron (2)
- Neutron scattering (2)
- Niobium (2)
- Non-spherical shape (2)
- OECD TG 124 (2)
- OER (2)
- Oberflächenfunktionalisierung (2)
- Optical Spectroscopy (2)
- Optical probe (2)
- Oriented immobilization (2)
- Osmolyte (2)
- Oxygen (2)
- PAG (2)
- PDT (2)
- PEG (2)
- Particle number concentration (2)
- Particle scattering simulation (2)
- Particle size and shape distribution (2)
- Particle size distributuion (2)
- Particle surface analysis (2)
- Particle synthesis (2)
- Partikel (2)
- Partikelgrößenverteilung (2)
- Peptide (2)
- Peptide Library (2)
- Performance validation (2)
- Permethrin (2)
- Perovskite (2)
- Ph (2)
- Phosphor (2)
- Photocuring (2)
- Photonic crystal (2)
- Photoresist (2)
- Plant Science (2)
- Polydopamine (2)
- Polymer blends (2)
- Polymer nanocomposites (2)
- Polymer particle (2)
- Polymer-based nanocomposites (2)
- Polymers of Intrinsic Microporosity (2)
- Polypropylene (2)
- Polysaccharides (2)
- Power density (2)
- Prehydrated electron (2)
- Presolvated electron (2)
- Protein A (2)
- Proximity-enhanced reaction (2)
- Pump-probe experiments (2)
- Quantitative Analysis (2)
- Quantum yields (2)
- Quasi-direct damage (2)
- Radical (2)
- Radical scavenger (2)
- Radioactive nanoparticle (2)
- Raman (2)
- Ratio refinement (2)
- Reactive oxygen species (2)
- Reference Material (2)
- Reliability (2)
- Reproducibility crisis (2)
- Rheology (2)
- Robotics (2)
- Rosin (2)
- SANS (2)
- SBA-15 (2)
- SIMS (2)
- SZ2080 negative photo-resist (2)
- Safety (2)
- Saxs (2)
- Scanning electron microscopy (2)
- Scicat (2)
- Secondary ion mass spectrometry (2)
- Self-assembly (2)
- Self-organization (2)
- Sensor molecules (2)
- SiGe (2)
- Silane (2)
- Silanization (2)
- Silica and Polystyrene Particles (2)
- Silica and polystyrene nanoparticles (2)
- Silica nanoparticles (2)
- Silicon (2)
- Silver nanoparticle (2)
- Single particle spectroscopy (2)
- Single-strand break (SSB) (2)
- Special issue (2)
- Spectroscopic Ellipsometry (2)
- Spectroscopic imaging ellipsometry (2)
- Stakeholder (2)
- Standardisierung (2)
- Starch (2)
- Starch nanoparticle (2)
- Steel (2)
- Structure-property relationship (2)
- Struvite (2)
- Surface Analysis (2)
- Surface Group Analysis (2)
- Surface charge (2)
- Surface morphology (2)
- Surface oxidation (2)
- Sustainability (2)
- Synchrotron radiation (2)
- Sythesis (2)
- TED-GC/MS (2)
- TGA (2)
- TKD (2)
- Temeprature scaling (2)
- Temperature scaling (2)
- Test material (2)
- Thermoanalytik (2)
- Thermoplastics (2)
- Thin polymer films (2)
- TiAl64V (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Titania (2)
- Titanium alloy (2)
- Titration (2)
- Transmission electron microscopy (TEM) (2)
- Transparency (2)
- Transparent Conductive Oxides (2)
- Two photon polymerisation (2)
- Ultra thin polymer films (2)
- Uncertainties (2)
- Virus inhibition (2)
- Volume specific surface area (2)
- WAXS (2)
- White light interference microscopy (2)
- X-ray diffraction (2)
- X-ray spectroscopy (2)
- XANES (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- Zeta potential (2)
- Zinc oxide (2)
- fluorescence (2)
- low energy electrons (2)
- nanoparticula (2)
- pH (2)
- (Hard) X-ray Photoelectron Spectroscopy (1)
- 100Cr6 (AISI 52100) steel (1)
- 18HLT01 MetVes II (1)
- 2D (1)
- 2D flakes (1)
- 2D nanomaterial (1)
- 2D nanoparticle (1)
- 3D FFT (1)
- 3D etching (1)
- 3D printed hydrogel (1)
- 3D-printing (1)
- 3d structuring (1)
- 60-230V (1)
- AAAA (1)
- ACCORDs (1)
- ADA-GEL (1)
- AEROSIL® OX50 (1)
- AFM based test methods (1)
- AFM force spectroscopy (1)
- AFM-IR (1)
- AFM-Kraft-Abstand-Kurven (1)
- AI tool (1)
- AIS QD (1)
- ASAXS (1)
- ATH (1)
- ATZ (1)
- Aantimicrobial (1)
- Ab initio calculations (1)
- Absolute measurement (1)
- Absorption (1)
- Active Matter (1)
- Actuating materials (1)
- Additiv (1)
- Additive (1)
- Adhesion (1)
- Adhesives (1)
- Advanced optics (1)
- Ag (1)
- Ag2S (1)
- AgInS (1)
- Aggregation induced emission (1)
- Al-Composite (1)
- Al-based alloy (1)
- Al2O3 thin films (1)
- AlOOH (1)
- Albumin (1)
- Alloy 36 (1)
- Alpha (1)
- Alumina toughened zirconia (1)
- Aluminium alloy (1)
- Aluminium oxide hydroxide (1)
- Aluminiumoxid (1)
- Amphiphilicity (1)
- Analyses (1)
- Analysis approach (1)
- Analytical chemistry (1)
- Analytical methods (1)
- Analytical scanning electron microscopy (1)
- Analytical services (1)
- Analytische Zentrifuge (1)
- Anatase (1)
- Aneurism (1)
- Anhydrite (1)
- Anisotropy (1)
- Antiadhesive surfaces (1)
- Antibacterial properties (1)
- Antibacterial surfaces (1)
- Antibakterielle Oberflächen (1)
- Antibiotic delivery (1)
- Antibiotic release (1)
- Antibodies (1)
- Antibody-gated indicator delivery (1)
- Antifouling (1)
- Antikörper (1)
- Antimicrobial resistance (1)
- Antimicrobial titanium coating (1)
- Antioxydant (1)
- Antiviral activity (1)
- Aqueous quantum dot (1)
- Aqueous synthesis (1)
- Arbitrary shapes (1)
- Argon gas cluster ion sputtering (1)
- Aromatische Aminosäureanalytik (1)
- Article concentration (1)
- Artificial Intelligence (1)
- Artificial digestion (1)
- Artificial intelligence (1)
- Atomic force microscope (1)
- Atomic fraction (1)
- Au Nanoparticles (1)
- Au nanodisks (1)
- Au nanoparticles (1)
- Au-nanocubes (1)
- Augenbohne (1)
- Auger Electron Spectroscopy (1)
- Auger electron spectroscopy (1)
- Automated Image Analysis (1)
- Automated analysis (1)
- Automated assay (1)
- Autonomous Materials Discovery (1)
- Aza-BODIPY (1)
- BADGER film (1)
- BAM Academy (1)
- BCA (1)
- BMU (1)
- BNP (1)
- BODIPY (1)
- BODIPY probe (1)
- BSA (1)
- BTS (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- BadgerFilm (1)
- Basidiomycetes (1)
- Bassanite (1)
- Bead-based assays (1)
- Benchmarking (1)
- Bessel-Strahlen (1)
- Bimetallic noble metal nanoparticles (1)
- Bimodal (1)
- Bimodal size distribution (1)
- Bio-ceramic engineering (1)
- Bio-orthogonal chemistry (1)
- Biochip (1)
- Biofilme (1)
- Biofilms (1)
- Biofunctional Molecules (1)
- Bioinspiration (1)
- Biomaterials (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Bionic materials (1)
- Bioresorbable Biomaterials (1)
- Biosensing (1)
- Biosensors (1)
- Bipyramid (1)
- Black phosphorus (1)
- Bloch wall (1)
- Boehmite alumina (1)
- Boehmite nanoparticles (1)
- Bone screws (1)
- Bone tissue engineering (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Bradford-Assay (1)
- Bragg peak (1)
- Broadband dielectric microscopy (1)
- Brown-rot fungi (1)
- Brownian motion (1)
- Brownsche Molekularbewegung (1)
- Building and Construction (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Bystander effect (1)
- Böhmit (1)
- C++ (1)
- C-F bond activation (1)
- C7H15N2O4P (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CE-ICP-MS (1)
- CEN (1)
- CO2 (1)
- CRP (1)
- CUINS2 nanocrystals (1)
- Calamistrum (1)
- Calcium sulfoaluminate (CSA) cement (1)
- Calibrated fluorescence measurements (1)
- Calibration structure (1)
- Cancer therapy (1)
- Carbon (1)
- Carbon Nanomembranes (1)
- Carbon black (1)
- Carbon dot (1)
- Carbon fibers (1)
- Carbon footprint (1)
- Carbon ions (1)
- Carbon nanoparticles (1)
- Carbon storage (1)
- Carrier protein (1)
- Catalogue of Services (CoS) (1)
- Catalogue of services (1)
- Catalyst (1)
- Catalyst layer (1)
- Catch and release assay (1)
- Cationic photocuring (1)
- Causes leading to scientific misconduct (1)
- CdS (1)
- CdTe quantum dots (1)
- Ce0.1Zr0.9O2 nanoparticles (1)
- Ce0.25Zr0.75O2 nanoparticles (1)
- Ce0.5Zr0.5O2 nanoparticles (1)
- Ce0.75Zr0.25O2 nanoparticles (1)
- Ce0.9Zr0.1O2 (1)
- CeO2 nanoparticles (1)
- CeO2/Co3O4 (1)
- Cell appendages (1)
- Cell size (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Cellulose acetate (1)
- Cellulose nanofibrils (1)
- Ceramic matrix composites (1)
- Ceramic microprinting (1)
- Ceramic nano particles (1)
- Ceramics (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certified Referencematerial (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Ceruloplasmin (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Channel access (1)
- Characterization method (1)
- Charge (1)
- Charge transfer (1)
- Chemical analyses (1)
- Chemiluminescence (1)
- Chemistry (1)
- Chemometric analysis (1)
- Chromium (III) complexes (1)
- Civil and Structural Engineering (1)
- Classification (1)
- Cleavable linker (1)
- Cleavable probes (1)
- Click chemistry (1)
- Climate (1)
- Cmake (1)
- Co (1)
- Co0.75Fe2.25O4 nanoparticles (1)
- Co1.5Fe1.5O4 nanoparticles (1)
- Co2.25Fe0.75O4 nanoparticles (1)
- Co3O4 nanoparticles (1)
- Coaggregation (1)
- Coatings and Films (1)
- Cobalt (1)
- Coherent exchange (1)
- Colloidal semiconductor nanocrystals (1)
- Color (1)
- Color tuning (1)
- Combinatorial peptide library (1)
- Command line (1)
- Command-line interface (1)
- Commercialization (1)
- Comparability (1)
- Comparability of Measurement Results (1)
- Compatible solute (1)
- Complementary methodology and metrology (1)
- Complementary methods (1)
- Complex-shape (1)
- Composition (1)
- Compound semiconductors (1)
- Computed tomography (1)
- Computertomographie (1)
- Conference (1)
- Confined catalyst (1)
- Confocal raman imaging (1)
- Conjugate (1)
- Contrast agent (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Converter marterial (1)
- Converter material (1)
- Copper (1)
- Coprecipitation (1)
- Core-shell nanoparticle (1)
- Core-shell nanoparticle (CSNP) (1)
- Core-shell particles (1)
- Core-shell structures (1)
- Core/shell materials (1)
- Core/shell nanoparticle (1)
- Core/shell quantum dot (1)
- Core–shell particles (1)
- Correlative Spectroscopy (1)
- Corrosion rate (1)
- Coulomb explosion (1)
- Covalend functionalization (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- Cr(III) complex (1)
- Critical strain (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Crosslinking density (1)
- CuNPs (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Curie temperature (1)
- Curing (1)
- Curve fitting (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- DFT (1)
- DFT calculations of Raman spectra (1)
- DMAS (1)
- DMSO (1)
- DNA structures (1)
- DNA-Binding protein (1)
- DPA (1)
- DRIFTS (1)
- DSB (1)
- DSC (1)
- DTAB (1)
- Damage (1)
- Damping factor (1)
- Data Fusion (1)
- Data Management (1)
- Data analysis round robin (1)
- Data catalog (1)
- Data corrections (1)
- Data correlation (1)
- Data management (1)
- Data manipulation (1)
- Data pipelines (1)
- Data processing (1)
- Data provenance (1)
- Data readiness level (1)
- Data stewartship (1)
- Data visualisation (1)
- Databases (1)
- Datasets (1)
- Datenfusion (1)
- Debian (1)
- Debye scattering equation (1)
- Debye-Waller-Faktor (1)
- Decay kinetics (1)
- Defect Analysis (1)
- Defect photoluminescence (1)
- Definition (1)
- Definition of nanomaterial (1)
- Degradation signatures (1)
- Degradation studies (1)
- Demonstration (1)
- Dendritic polyglycerol (1)
- Density (1)
- Depth profiling (1)
- Deuterium (1)
- Diagnostic antibodies (1)
- Diclofenac (1)
- Diffractive gratings (1)
- Digestion (1)
- Digital laboratory (1)
- Digitalisation (1)
- Digitalisierung (1)
- Digitalization (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Diopsid (1)
- Direct Laser Writing (1)
- Direct laser interference patterning (1)
- Dispersion (1)
- Dispersion of nano materials (1)
- Dissolution (1)
- Distribution of nanoparticles (1)
- Domain wall (1)
- Doping (1)
- Drug delivery (1)
- Dual sensing (1)
- Durability (1)
- Dyad molecules (1)
- Dye labeling (1)
- Dyes (1)
- Dynamic behavior (1)
- Dynamic heterogeneity (1)
- Dynamische Lichtstreuung (1)
- Dünne Schichten (1)
- E. coli (1)
- EC nanomaterial definition (1)
- EDS-TM002 (1)
- ELISA (1)
- EMPIR nPSize (1)
- EMPIR project (1)
- EPICS (1)
- EPMA (Electron Probe Microanalysis) (1)
- EU (1)
- EXAFS (1)
- Ectoine hydration (1)
- Editorial (1)
- Education (1)
- Elastin (1)
- Elastomer (1)
- Electric Safety Interlock (1)
- Electrical Paramters (1)
- Electrical Properties (1)
- Electrical conductivity (1)
- Electrical properties (1)
- Electrical thin layers (1)
- Electrocatalytic Water Splitting (1)
- Electrochemical Degradation (1)
- Electrochemical Titration (1)
- Electrochemical catalysts (1)
- Electrochemical sensing (1)
- Electrochemical treatment (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron Probe Microanalysis (1)
- Electron Probe Microanalysis (EPMA) (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron beam-induced fragmentation (1)
- Electron density map (1)
- Electron probe microanallysis (EPMA) (1)
- Electron probe microanalysis (1)
- Electron spectroscopy (1)
- Electron tomography (1)
- Electronic, Optical and Magnetic Materials (1)
- Electrons (1)
- Electrospun fibers (1)
- Electrospun nanocomposite fiber (1)
- Elektronisches Laborbuch (1)
- Ellipsometric porosimetry (1)
- Ellipsometrie (1)
- Emission enhancement (1)
- Encapsulation (1)
- Endpoints (1)
- Energiedissipation im Kontakt (1)
- Energy materials (1)
- Engineered nanomaterials (1)
- Environmental Chemistry (1)
- Epoxi nanocomposites (1)
- Epoxy conversion degree (1)
- Epoxy-Anhydrid Duroplast (1)
- Escherichia coli (1)
- Estrogenic activity of plastic nanoparticles (1)
- Etofenprox (1)
- European Metrology Network (1)
- European Metrology Network for Advanced Manufacturing, Strategic Research Agenda (1)
- European funding strategies (1)
- Ex-situ (1)
- Exchange length (1)
- Exfoliation (1)
- Experiment tracking (1)
- Experimental traceability (1)
- Expert system (1)
- Extracellualr vesicles (1)
- Extracellular matrix (1)
- F pili (1)
- FAIRification (1)
- FLASH effect (1)
- FTIR spectroscopy (1)
- Fabrication parameters (1)
- Fe (1)
- Fe-Ni (1)
- Fe2O3 nanoparticles (1)
- FeNi nanoparticles (1)
- FeNi thin film (1)
- Femtosecond laser-processing (1)
- Fermi resonance (1)
- Ferrihydrite (1)
- Ferumoxytol (1)
- Fiber toxicology (1)
- Field of view (1)
- Field sensor (1)
- Filled rubbers (1)
- Filled thermosets and plastics (1)
- Finite element analysis (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Fire Retardant (1)
- Fityk (1)
- Flame retardant (1)
- Flammability (1)
- Flexural rigidity (1)
- Flourescence (1)
- Fluorescence intensity ratio (1)
- Fluorescence microscopy (1)
- Fluorescence quantum yield (1)
- Fluorescence spectroscopy (1)
- Fluorescent glasses (1)
- Fluorescent indicator (1)
- Fluorescent label (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Focused Ion Beam (1)
- Focussed ion beam (1)
- Food Science (1)
- Force distance curves (1)
- Force-distance curves (1)
- Force-distance-curve (1)
- Form factor (1)
- Forschungsstrategie (1)
- Free electron laser (FEL) (1)
- Freeze casting (1)
- Fresnoit (1)
- Frozen state photopolymerization (1)
- Fullerene (1)
- Fullerite (1)
- Fully aromatic frameworks (1)
- Functional fatigue (1)
- Functional group analysis (1)
- Functional properties (1)
- Functionalized Nanomaterials (1)
- Functionalized nano- and microparticles (1)
- Functionalized nanographene (1)
- Functionalized silica and polymeric particles (1)
- Gadolinium (1)
- Gamma (1)
- Gamma ray (1)
- Gas separation membranes (1)
- Gas sorption (1)
- Gastrointestinal barrier (1)
- Gated hybrid material (1)
- Gel (1)
- General Chemistry (1)
- General Medicine (1)
- Geology (1)
- Git (1)
- Glass Ceramic (1)
- Glass ceramic (1)
- Glass transition temperature (1)
- Glass-ceramic (1)
- Glow-discharge optical emission spectroscopy (1)
- Gold Nanoparticle (1)
- Gold nanoclusters (1)
- Gold-Nanopartikel (1)
- Governance (1)
- Grafting (1)
- Grain orientation (1)
- Granulometrie (1)
- Graphen Oxide (1)
- Graphene /-oxide (1)
- Graphene funcionalisation (1)
- Graphene functionalisation (1)
- Graphene functionalization (1)
- Graphene related materials (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphene-related 2D materials (1)
- Graphhene (1)
- Graphs (1)
- Green synthesis (1)
- Grenzfläche als Material (1)
- Größe (1)
- Größenbestimmung (1)
- Guanidine receptor (1)
- Gypsum' SAXS (1)
- HEA (1)
- Hard X-ray photoelectron spectroscopy (1)
- Heat maps (1)
- Heat-resistant nickel alloys (1)
- Hematite (1)
- Heterogeneous catalysis (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical porosities (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High Resolution (1)
- High pressure (1)
- High-resolution (1)
- High-resolution transmission electron microscopy (1)
- High-throughput (1)
- High-throughput measurements (1)
- History (1)
- Holistic experiment approaches (1)
- Holzschutzmittel (1)
- Homogeneous deposition (1)
- Human antibodies (1)
- Human factor (1)
- Human influence (1)
- Hybrid metrology measurement (1)
- Hydrodynamics (1)
- Hydrogen Generation (1)
- Hydrogenated nanostructures (1)
- Hydrothermal synthesis (1)
- Hygiene (1)
- Hyperbranched (1)
- Hyperspectral imaging (1)
- ICP-OES (1)
- ILC (1)
- IR (1)
- IR oxide (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- ISO 21363 (1)
- ISO 23173 (1)
- ISO/TC 201 (1)
- ISO/TC 202 Microbeam Analysis (1)
- ISO/TC229 (1)
- ISOGScope (1)
- Identification (1)
- ImAFM (1)
- Image Segmentation (1)
- Image manipulation (1)
- Images (1)
- Imaging Ellipsometry (1)
- Imaging ellipsometry (1)
- Imaging surface chemical analysis (1)
- Imaging techniques (1)
- Immobilisierung (1)
- Immobilization (1)
- Immunoaffinity extraction (1)
- Immunpräzipitation (1)
- Implant material (1)
- In situ (1)
- In situ Atomic Force Microscopy (AFM) (1)
- In situ synthesis (1)
- In vivo imaging (1)
- In-situ scattering (1)
- Indenter area function (1)
- Indium Tin Oxide (1)
- Industrial and Manufacturing Engineering (1)
- Industrial application (1)
- Inelastic background (1)
- Inelastic neutron scattering (1)
- Inflammation (1)
- Influenza A virus (1)
- Infrared nano AFM (1)
- Infrastructure (1)
- Insecticide (1)
- Instrument automation (1)
- Instrument compliance (1)
- Instrument control (1)
- Instrumentation utilization (1)
- Inter-laborator comparison (1)
- Inter-laboratory comparisons (1)
- Intercomparability (1)
- Interlaboratory (1)
- Interlaboratory comparability (1)
- Interlaboratory comparisons (1)
- Interlabority comparison (1)
- Intermixing (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Interpenetrating polymer networks (1)
- Intrinsic OER activity (1)
- Iodine (1)
- Ion beam erosion Sectioning (1)
- Ion beam therapy (1)
- Iridium oxide (1)
- Iron (1)
- Iron carbide (1)
- Iron nanoparticles (1)
- Iron nanophases (1)
- Iron nitride (1)
- Irreversible adsorption (1)
- JNP (1)
- JNP AdvManuNet (1)
- K+ doped (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Knowledge (1)
- Kunststoff (1)
- LET (1)
- LEVASIL 50/50 (1)
- LL equation (1)
- Label (1)
- Laboratory methodology (1)
- Landau Lifshitz Gilbert equation (1)
- Landau de-Gennes analysis (1)
- Lanthanide(III) (1)
- Lanthanides (1)
- Large number of participants (1)
- Laser (1)
- Laser Metal Deposition (LMD) (1)
- Laser damage (1)
- Laser direct writing (1)
- Laser light scattering (1)
- Laser nanostructuring (1)
- Laser technology (1)
- Laser writing (1)
- Laser-Materialbearbeitung (1)
- Laser-induced Periodic Surface Structures (LIPSS) (1)
- Laser-induced amorphization (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induzierte periodische Oberflächen-Nanostrukturen (1)
- Laser-induzierte periodische Oberflächenstrukturen (1)
- Laser-modified surface (1)
- Lateral dimensions (1)
- Lateral flow assay (1)
- Lateral flow test (1)
- Layer Materials (1)
- Layer system (1)
- Layered manganese oxide (1)
- Lead-free (1)
- Legionella (1)
- Leichtbau (1)
- Lichtstreuung (1)
- Lifetime analysis (1)
- Ligand exchange (1)
- Ligand quantification (1)
- Lignin (1)
- Linux (1)
- Liquid-liquid-phase-separation (1)
- Literature survey (1)
- Llifetime (1)
- Lonic liquid (1)
- Lorenz transmission electron microscopy (1)
- Low Reynolds number swimmers (1)
- Low-loading (1)
- Lubricant additives (1)
- Luminescence lifetime measurments (1)
- Luminescent lifetime (1)
- Luminescent materials (1)
- MCNP (1)
- MIC (1)
- MNP production technique (1)
- MPI (1)
- MPLS (1)
- MRT (1)
- Macrophage (1)
- Magic-sized cluster (1)
- Magnet coupling (1)
- Magnetic (1)
- Magnetic Nanoparticles (1)
- Magnetic anisotropy (1)
- Magnetic beads (1)
- Magnetic interacion (1)
- Magnetic nanoparticle (1)
- Magnetic resonance imaging (1)
- Magnetic swimmers (1)
- Magnetization dynamics (1)
- Magnetron Sputtering (1)
- Martin Seah (1)
- Mass spectrometry (1)
- Material chemistry (1)
- Material defects (1)
- Material-binding Peptides (1)
- Materials Chemistry (1)
- Materials Design (1)
- Materials and Processes Data Reusability (1)
- Materials science (1)
- Matrix (1)
- Matter reorganization (1)
- Matter reorganization theories (1)
- Me-TiO2 (1)
- Measurement methodology (1)
- Measurement science (1)
- Mechanical testing (1)
- Median lethal energy deposit (1)
- Medical implants (1)
- Mesocrystal (1)
- Mesoporous Materials (1)
- Mesoporous SiO2-CaO nanoparticles (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous particles (1)
- Mesoporous phosphate-based glasses (1)
- Meta material (1)
- Metadata (1)
- Metadata collection (1)
- Metadata structuring (1)
- Metal (1)
- Metal carbides (1)
- Metal fluorides (1)
- Metal organic frameworks (1)
- Metal-organic frameworks (1)
- Metal-semiconductor (1)
- Metal–organic framework (1)
- Metasurface (1)
- Methodology development (1)
- Methos comparision (1)
- Metrics (1)
- Metrological traceability (1)
- Metrology in Chemistry and Biology (1)
- Micelle (1)
- Micro- and Nanoplastics (1)
- Microarray (1)
- Microarray printing (1)
- Microbial adhesions (1)
- Microfabrication (1)
- Microfluids (1)
- Microorganism (1)
- Microparticle (1)
- Microparticles (1)
- Microplastic reference materials (1)
- Microstructure evolution (1)
- Microtribology (1)
- Microwave synthesis (1)
- Microwave-assisted synthesis (1)
- Mie resonances (1)
- Mikrostrukturen (1)
- Mitochondria (1)
- Mixed metal oxide (1)
- Model (1)
- Modulus (1)
- Molecular Dynamics (1)
- Molecular Mobility (1)
- Molecular mobility (1)
- Molecularly imprinted polymers (1)
- Monomer (1)
- Monte carlo (1)
- Monte-Carlo (1)
- Morpho-chemical characterization (1)
- Motor controller (1)
- Multi-photon light structuring (1)
- Multi-resistant bacteria (1)
- Multi-sample analysis (1)
- Multi-scale (1)
- Multi-scale measurements (1)
- Multicolored (1)
- Multifunctional nanoparticles (1)
- Multiphoton laser structuring (1)
- Multivalency (1)
- Mussel inspired materials (1)
- Mussel-inspired adhesives (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutual calibration (1)
- NFDI (1)
- NIR-II Imaging (1)
- NIR-II fluorescence (1)
- NIRII (1)
- NaCl-Methode (1)
- Nafion 117 (1)
- Naica (1)
- Nanaoparticle (1)
- Nano CRM (1)
- Nano Characterisation (1)
- Nano characterization (1)
- Nano material (1)
- Nano screening (1)
- Nano structure (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-characterisation (1)
- Nano-object (1)
- Nano-related data (1)
- Nano-risk assessment (1)
- NanoCAM (1)
- NanoValid (1)
- Nanoanalysis (1)
- Nanoanalytics (1)
- Nanobiointerfaces (1)
- Nanocasting (1)
- Nanocomposite fibers (1)
- Nanocubes (1)
- Nanodiamant (1)
- Nanodielectrics (1)
- Nanodosimetry (1)
- Nanofiller (1)
- Nanokomposit (1)
- Nanomaterial Properties (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial design (1)
- Nanomaterial legislation (1)
- Nanomaterial properties (1)
- Nanomaterial regulation (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanon (1)
- Nanoparticle Characterization (1)
- Nanoparticle characterization (1)
- Nanoparticle size distribution (1)
- Nanoparticle size measurement (1)
- Nanoparticles Synthesis and Characterization (1)
- Nanoparticular TiO2 (Anatase) (1)
- Nanopipette modification (1)
- Nanoplatelet (1)
- Nanoplatform (1)
- Nanoplattform (1)
- Nanoporous (1)
- Nanopowder (1)
- Nanopropous materials (1)
- Nanorisk Governance (1)
- Nanosafety services (1)
- Nanoscale (1)
- Nanoscale luminescent reporters (1)
- Nanoscale measurements (1)
- Nanoscience (1)
- Nanosensors (1)
- Nanosilica (NS) (1)
- Nanosilver (1)
- Nanostrcutures (1)
- Nanostructural analysis (1)
- Nanostructured FeOx films (1)
- Nanostrukturen (1)
- Nanotechnologie (1)
- Nanotechnologies (1)
- Nanotoxicity (1)
- Nanotribology (1)
- Nanowear (1)
- Native oxide layer (1)
- Nd excitation (1)
- Near-field spectroscopy (1)
- Neel wall (1)
- Network (1)
- Neuartige Materialien (1)
- Neural Networks (1)
- Neutron Scattering (1)
- Neutron imaging (1)
- Next Generation Sequencing (1)
- Ni (1)
- Ni-Mn-Ga (1)
- Nichtrostender Stahl (1)
- Nickel (1)
- Nile Red (1)
- Nitrene[2+1]cycloaddition (1)
- Nitrogen (1)
- Nnano particle (1)
- Noble metal nanoparticles (1)
- Non-classical crystallization (1)
- Non-destructive ambient analysis (1)
- Non-destructive testing (1)
- Non-spherical nanoparticles (1)
- Non-thermally coupled levels (1)
- Non-vitriolic iron-gall inks (1)
- Nonclassical crystallization (1)
- Nonlinear lithography (1)
- Normung (1)
- Nuclear Energy and Engineering (1)
- Nucleus (1)
- Numerical simulations (1)
- OECD TG (1)
- OECD TG 125 (1)
- OH (1)
- OMS (1)
- Oberflächenanalytik (1)
- Oberflächenintegrität (1)
- Oberflächenmesstechnik (1)
- Oberflächenmodifikation (1)
- Oberflächenpotential (1)
- Oberflächensteifigkeit (1)
- Ontologies (1)
- Open data on zenodo (1)
- Operating Procedure (1)
- Optical Assays (1)
- Optical analysis (1)
- Optical birefringence (1)
- Optical constants (1)
- Optical detection (1)
- Optical flow (1)
- Optical measurement technology (1)
- Optical measurements (1)
- Optical near field (1)
- Optical probes (1)
- Optical properties (1)
- Optical scattering (1)
- Optical temperature sensing (1)
- Optical tweezers (1)
- Optically active surfaces (1)
- Oral uptake (1)
- Ordered mesoporous carbon (1)
- Organic phosphates (1)
- Organic–inorganic nanostructures (1)
- Origami (1)
- Osteogenesis (1)
- Oxygen evolution reaction (OER) (1)
- Oxygen sensing (1)
- Oxygen sensitive (1)
- P25 (1)
- PC characterisation (1)
- PES (1)
- PFAS (1)
- PH (1)
- PH probe (1)
- PVDF-Based membrane (1)
- Paint (1)
- Pair distribution function (1)
- Paper mills (1)
- Paramagnetism (1)
- Parameter correlation. (1)
- Participatory Approach (1)
- Particle accretion (1)
- Particle architecture (1)
- Particle scatterin simulations (1)
- Particle sensors (1)
- Particle shape (1)
- Particle size determination (1)
- Particle transfer (1)
- Particle, imaging (1)
- Partikeldurchmesser (1)
- Partikelgröße (1)
- Partikelgrößenbestimmung (1)
- Partikelkonzentration (1)
- Passivation shell (1)
- Pd(II) (1)
- Peem (1)
- Pelletization (1)
- Peptide binder (1)
- Peptides (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance check (1)
- Perovskites (1)
- Pesticide (1)
- Pflanzenvirus (1)
- Phage Display (1)
- Phase transition (1)
- Phase transitions (1)
- Phenothrin (1)
- Phosphinine (1)
- Photodynamic therapy (1)
- Photoelectrochemistry (1)
- Photoluminescence quantum yield (1)
- Photon bunching (1)
- Photonics (1)
- Photons (1)
- Photooxidation (1)
- Photophysic (1)
- Photopolymer (1)
- Photoreforming (1)
- Photostability (1)
- Physical and theoretical chemistry (1)
- Physicochemical characterization (1)
- Pigments (1)
- Pitfalls (1)
- Plant virus (1)
- Plasma deposition (1)
- Plasmon enhancement (1)
- Plasmon resonance (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Plastic reference materials (1)
- Plastics (1)
- Plastikstrategie (1)
- Platinum-ruthenium colloid (1)
- Polarimetry (1)
- Pollution (1)
- Polybutadiene/chloroprene (1)
- Polydispersity (1)
- Polyethylene (1)
- Polyethylene Glycol (1)
- Polyethylene glycol (1)
- Polyethylene glycol diacrylate (1)
- Polyethylene terephthalate (1)
- Polymer analysis/characterization (1)
- Polymer based Nanocomposites (1)
- Polymer electrolyte fuel cell (1)
- Polymer foils (1)
- Polymer nanocomposite (1)
- Polymer-binding Peptides (1)
- Polymer-ceramic mixtures (1)
- Porous carbon (1)
- Porous carbons (1)
- Porphyrin (1)
- Position of carboxylate group (1)
- Post-modification by L-cysteine (1)
- Postfluorination (1)
- Powder (1)
- Powder X-ray diffraction (1)
- Powder processing (1)
- Power Electronics (1)
- Power electronics (1)
- Pphotophysics (1)
- Practical aspects (1)
- Pre-standardisation (1)
- Preceramic polymer (1)
- Precipitation (1)
- Preparation (1)
- Primer (1)
- Principle component analysis (1)
- Procedure (1)
- Prodrug antibiotic (1)
- Production (1)
- Proficiency test (1)
- Propolis (1)
- Protection (1)
- Protein structure (1)
- Prürfrichtlinie (1)
- Pt(II) (1)
- Pump-probe (1)
- Purification (1)
- Pycnometry (1)
- Pyrethroid (1)
- QNMR (1)
- QUASES (1)
- Qantum yield (1)
- Quality assurcance (1)
- Quality control (1)
- Quality infrastructure (1)
- Quantitative surface chemical analysis (1)
- Quantum Dots (1)
- Quantum Yields (1)
- Quantum do (1)
- Quantum rod (1)
- Quartz nanopipettes (1)
- Quarzglas (1)
- RBE (1)
- REACH (1)
- RNA (1)
- Radiation (1)
- Radiation protection (1)
- Radical Scavenge (1)
- Radioactive NP (1)
- Raman spectroscopy (1)
- Ratiometric (1)
- Ratiometric Sensors (1)
- Real time growth control (1)
- Real-time infrared spectroscopy (1)
- Recycling (1)
- Recycling-by-design (1)
- Reference Method (1)
- Reference Nanomaterials (1)
- Reference methods (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Reference particles (1)
- Reference procedures (1)
- Reference products (1)
- Reference standards (1)
- Reference structure (1)
- Referenzdaten (1)
- Regeneration (1)
- Regional workshop (1)
- Reibungsreduktion (1)
- Reinforcement (1)
- Release (1)
- Release kinetics (1)
- Reliabiilty (1)
- Reliable characterization (1)
- Renewable Energy (1)
- Renewable energy (1)
- Repelling surface coatings (1)
- Reporter (1)
- Representative morphology modeling (1)
- Research Data Management (1)
- Resins (1)
- Resonance (1)
- Reverse microemulsion (1)
- Ridis amorphous fraction (1)
- Ripples (1)
- Risk Governance (1)
- Risk asessment (1)
- Risstrajektorie (1)
- Robocasting (1)
- Robotic synthesis (1)
- Robotic-supported synthesis (1)
- Roughness (1)
- Round Robin (1)
- Rreference material (1)
- Röntgenrefraktion (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SBA-16 (1)
- SDLs (1)
- SKPM (1)
- SMPS (1)
- SRA (1)
- SSB (1)
- SSbD (1)
- STEM-in-SEM (1)
- STEM-in-SEM (TSEM) (1)
- STL file input (1)
- SWIR photoluminescence (1)
- Sabatier (1)
- Saccharide sensing (1)
- Safe by design (1)
- Safe-by-design (1)
- Safer by design (1)
- Sall-angle scattering (1)
- Sample peparation (1)
- Saphir (1)
- Saponite (1)
- Scannig probe microscope (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (1)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (1)
- Scanning Probe Microscopy (1)
- Scanning Probe methods (1)
- Scanning micro-X-ray fluorescence (1)
- Scanning probe measurements (1)
- Scanning probe microscopy (1)
- Scanning transmission X-ray microscopy (STXM) (1)
- Scattering pattern (1)
- Scattering pattern simulation (1)
- Schlangenbohne (1)
- Schmiermittel (1)
- SchwarzP cells (1)
- Scientific misconduct (1)
- Screening (1)
- Screening method (1)
- Scribal corrections (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Self-degrading (1)
- Self-driving Labs (1)
- Semantic Interoperability (1)
- Semiconductor materials (1)
- Semiconductor nanocrystals (1)
- Semiconductur (1)
- Sensing; temperature (1)
- Sensitization (1)
- Sensor Materials (1)
- Separation membranes (1)
- Sequential Learning (1)
- Shape-controlled (1)
- Shape-memory alloys (1)
- Shortwave infrared (1)
- Si-Ge (1)
- SiO2 Nanoparticle (1)
- Sialic acid (1)
- Silanisation (1)
- Silica Nanoparticles (1)
- Silica coating (1)
- Silica particles (1)
- Silica- and Polystyrene Particles (1)
- Silica- and polystyrene particles (1)
- Silicon nanoparticles (1)
- Silver indium sulfide (1)
- Simulations (1)
- Single asperity (1)
- Single asperity contact (1)
- Single cell-ICP-ToF-MS (1)
- Single enhancement (1)
- Single molecule (1)
- Single particle-ICP-ToF-MS (1)
- Single-dot spectroscopy (1)
- Single-particle measurements (1)
- Singlet oxygen (1)
- Size and size distribution (1)
- Size measurement (1)
- Size measurements (1)
- Slicers (1)
- Sliding (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle X-ray Scattering (1)
- Small-angle x-ray scattering (1)
- Small-area XPS (1)
- Smartphone readout device (1)
- Software UNIFIT 2022 (1)
- Sol-gel (1)
- Sol-gel synthesis (1)
- Solar cell (1)
- Solar cells (1)
- Solarpur (1)
- Solid state (1)
- Solid-binding Peptides (1)
- Sonochemical synthesis (1)
- SpICP-MS (1)
- Speciation analysis (1)
- Specific Surface Area (BET) (1)
- Specific heat spectroscopy (1)
- Specific surface (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spektroskopie (1)
- Spezifische Oberfläche (1)
- Spin (1)
- Stabilization (1)
- Standard Operation Procedures (1)
- Standard operation procedures (1)
- Standardarbeitsanweisung (1)
- Standardarbeitsanweisungen (1)
- Standardized check (1)
- Stepwise growth (1)
- Stochastic Landau Lifshitz equation (1)
- Strain measurement (1)
- Strategic Research Agenda (SRA), (1)
- Strontium titanate (1)
- Structural characterisation (1)
- Structural color (1)
- Structural precision (1)
- Structure activity relationships (1)
- Structure–property correlation (1)
- Sulfated materials (1)
- Superconductivity (1)
- Superelasticity (1)
- Superparamagnetism (1)
- Surface Activation (1)
- Surface Analysis Working Group (1)
- Surface Analytics (1)
- Surface Chemical Transformation (1)
- Surface Chemistry (1)
- Surface Modification (1)
- Surface characterization (1)
- Surface chemisttry (1)
- Surface coating (1)
- Surface engineering (1)
- Surface functional group quantification (1)
- Surface group (1)
- Surface groups (1)
- Surface modified nano- and microparticles (1)
- Surface morphology and chemistry (1)
- Surface plasmon polaritons (1)
- Surface plasmon resonance (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface superconductivity (1)
- Surface-induced Melting (1)
- Surface-initated grafting (1)
- Surfaces, Coatings and Films (1)
- Sustainability and the Environment (1)
- Sustainable-by-Design (1)
- Suzuki-Miyaura coupling (1)
- Swarming (1)
- Switch (1)
- Synergistic effects (1)
- Synergy (1)
- Synthesis library (1)
- Systems architecture (1)
- TGA-MS (1)
- TMDCs (1)
- TOPAS-nBio (1)
- TRL (1)
- TSEM (1)
- Tafel Plot (1)
- Tag (1)
- Targeted nanoparticle (1)
- Temparatur modulated Flash DSC (1)
- Temperature effects (1)
- Temperature modulated DSC (1)
- Temperature modulated differential scanning calorimetry (1)
- Terminal functional groups (1)
- Termites (1)
- Test artifact (1)
- Test structure (1)
- Testguideline (1)
- Theoretical modelling (1)
- Theranostics (1)
- Therapeutic antibodies (1)
- Therapy (1)
- Thermal annealing (1)
- Thermal coupling energy level (1)
- Thermal desorption mass spectrometry (1)
- Thermally coupled levels (1)
- Thermogravimetry (1)
- Thermoset composition (1)
- Thermosets (1)
- Thetaevolve (1)
- Thick shells (1)
- Thickness measurements (1)
- Thin Layers (1)
- Thin film (1)
- Thin film analysis (1)
- Thin film systems (1)
- Thin magnetic films (1)
- Thin mesoporous films (1)
- Thiol-ene click chemistry (1)
- Thiols (1)
- Threshold (1)
- Thumor therapy (1)
- Ti oxide (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- TiO2 D540 nanoparticles (1)
- TiO2 PVP (1)
- TiO2 nanoparticle (1)
- TiO2 nanoparticles (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-of-Flight Secondary Ion Mass Spectrometry (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Titanium (1)
- Titanium alloys (1)
- Titanium oxide (1)
- ToF SIMS (1)
- Tools (1)
- Tools to combat scientific misconduct (1)
- Topas-nbio (1)
- TopasMC (1)
- Torah scrolls (1)
- Total scattering (1)
- Toxicity (1)
- Traceability derivation (1)
- Traceable nanoparticle size measurements; (1)
- Transition electron microscopy (1)
- Transition metal dichalcogenide (1)
- Transmission Electron Microscopy (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transparent conductive Oxides (1)
- Transport limitations (1)
- Trastuzumab (1)
- Trends (1)
- Triazine (1)
- Triggered (1)
- Trinkwasser (1)
- Triplet-triplet annihilation (1)
- Tungsten (1)
- Twin orientation relationship (1)
- Two photon polymerization (1)
- Two-Photon Polymerization (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Two-photon adsorption (1)
- Two-photon polymerisatio (1)
- Two-photon-polymerization (1)
- Type-I pyrethroids (1)
- UV Weathering (1)
- UV-curing (1)
- UiO (1)
- Ultrakurzpuls-Laser (1)
- Ultrakurzpuls-Laserbearbeitung (1)
- Ultraschall (1)
- Ultraschallunterstütztes Fräsen (1)
- Ultrashort lasers (1)
- Uncertainty budget (1)
- UpConversion (1)
- Upconverion (1)
- Upconversion luminescence (1)
- Upconverstion (1)
- Upscaling (1)
- VMAAS (1)
- VRFB (1)
- Van der Waals forces (1)
- Vanadium speciation (1)
- Variable excitation (1)
- Vernetzung (1)
- Verschleißreduktion (1)
- Video (1)
- Vigna unguiculata (1)
- Virucidality (1)
- Viskosität (1)
- Vitriolic iron-gall inks (1)
- Volatiles from thermosets (1)
- Volcano plot (1)
- Vulcanization (1)
- Wastewater (1)
- Water (1)
- Water analysis (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water management (1)
- Waxs (1)
- Wear particles (1)
- Werkstoffe (1)
- Wet dispersion (1)
- White light interferometric microscopy (1)
- White light interferometry microscopy (1)
- White-light Interference Microscopy (1)
- White-rot fungi (1)
- Wide-bandgap semiconductors (1)
- Wide-range (1)
- Wirksumme (1)
- Wood protection (1)
- Workflow (1)
- Workflows (1)
- X-Ray Spectroscopy (1)
- X-Ray analysis (1)
- X-ray Photoelectron Spectroscopy (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Fluorescence (1)
- X-ray Photoelectron Spectroscopy (XPS) (1)
- X-ray generation (1)
- X-ray instrumentation (1)
- X-ray microscopy (1)
- X-ray microspectroscopy (1)
- X-ray photoelectron spectroscopy (XPS) (1)
- X-ray production efficiency (1)
- X-ray spectrometer (1)
- X-rays (1)
- XCT (1)
- XPS spctroscopy (1)
- XRM (1)
- XUV scattering (1)
- Yb(III) complex (1)
- Young´s modulus (1)
- Yttria stabilized zirconia (1)
- Yttria-stabilized zirconia (1)
- ZIF-8 (1)
- Zeolitic Imidazolate Frameworks (1)
- Zero wear (1)
- Zinc phosphate (1)
- Zirconium (1)
- ZnO (1)
- ZnO nanoparticles (1)
- ZnSe (1)
- ZrO2 nanoparticles (1)
- [MMIM]+[DMP]− (1)
- abasic side (1)
- aggregation-induced dual emission (AIDE) (1)
- analytical service (1)
- anion-exchange (1)
- antibody (1)
- attraktive Wechelwirkung (1)
- automation (1)
- bacteria (1)
- bacteria detection (1)
- base loss (1)
- bended arrow of time (1)
- bioactive (1)
- bioimaging (1)
- biomaterials (1)
- bone (1)
- clustered nanoparticles (1)
- dispersion (1)
- dsDNA (1)
- electron microscopy (1)
- flow cytometry (1)
- fluorescence microscopy (1)
- fluorescence standards (1)
- gamma ray (1)
- graphene related 2D materials (1)
- immunoseparation (1)
- instrument utilization (1)
- laboratory automation (1)
- laboratory management (1)
- lifetime (1)
- magnetic nanoparticle (1)
- metadata collection (1)
- method (1)
- nm films (1)
- organic dyes (1)
- particle (1)
- particle size determination (1)
- qNMR (1)
- quality assurcance (1)
- quantum dot (1)
- quantum yield (1)
- radiolysis (1)
- research efficiency (1)
- sample preparation (1)
- screening tes (1)
- shape control (1)
- single cell-ICP-ToF-MS (1)
- single particle-ICP-ToF-MS (1)
- stl code (1)
- surface group analysis (1)
- synthesis (1)
- temeprature dependent exchange length (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
- total scattering (1)
- transmission mode (1)
- wrapping (1)
- µ-XRF (1)
- Äquivalenzdurchmesser (1)
Organisationseinheit der BAM
- 6 Materialchemie (656)
- 6.1 Oberflächen- und Dünnschichtanalyse (345)
- 1 Analytische Chemie; Referenzmaterialien (184)
- 1.2 Biophotonik (159)
- 6.6 Physik und chemische Analytik der Polymere (134)
- 6.5 Synthese und Streuverfahren nanostrukturierter Materialien (129)
- 6.2 Material- und Oberflächentechnologien (90)
- 5 Werkstofftechnik (61)
- 4 Material und Umwelt (46)
- 5.4 Multimateriale Fertigungsprozesse (33)
Paper des Monats
- ja (15)
Small-angle scattering (SAS) offers a reliable route to characterize the nanostructure of large amounts of material with a minimum of tedium, for example, easily extracting size distributions and volume fractions. There are a variety of analysis programs available while the evaluation of SAS measurements has been dominated by the classical curve fitting approach. SASfit represents such a classical curve fitting toolbox: it is one of the mature programs for SAS data analysis and has been available and used for many years. The latest developments will be presented and a scattering function of a mass fractal model of branched polymers in solution is provided as an example for implementing a plug-in.
Alternatively to classical curve fitting, part two presents the latest developments of the user-friendly open-source Monte Carlo regression package McSAS. The form-free Monte Carlo nature of McSAS means, it is not necessary to provide further restrictions on the mathematical form of the parameter distribution: without prior knowledge, McSAS is able to extract complex multimodal or odd- shaped parameter distributions from SAS data. The headless mode is presented by an example of operation within interactive programming environments such as a Jupyter notebook.
Structural modularity of polymer frameworks is a key advantage of covalent organic polymers, however, only C, N, O, Si and S have found their way into their building blocks so far. Here, we expand the toolbox available to polymer and materials chemists by one additional nonmetal, phosphorus. Starting with a building block that contains a λ⁵‐phosphinine (C₅P) moiety, we evaluate a number of polymerisation protocols, finally obtaining a π‐conjugated, covalent phosphinine‐based framework (CPF‐1) via Suzuki‐Miyaura coupling. CPF‐1 is a weakly porous polymer glass (72.4 m2 g‐1 N2 BET at 77 K) with green fluorescence (λmax 546 nm) and extremely high thermal stability. The polymer catalyzes hydrogen evolution from water under UV and visible light irradiation without the need for additional co‐catalyst at a rate of 33.3 μmol h‐¹ g‐¹. Our results demonstrate for the first time the incorporation of the phosphinine motif into a complex polymer framework. Phosphinine‐based frameworks show promising electronic and optical properties that might spark future interest in their applications in light‐emitting devices and heterogeneous catalysis.
Low temperature functionalization of two-dimensional boron nitride for electrochemical sensing
(2019)
Two-dimensional hexagonal boron nitride(h-BN)as an emerging nanomaterial exhibits uniquephysicochemical properties, making it suitable candidate for a wide spectrum of applications.However, due to its poor functionality, the processability of this nanomaterial is low. In this work, wereport on a straightforward and scalable approach for the functionalization of h-BN by nitrene[2+1]cycloaddition at room temperature. The triazine-functionalized h-BN(Trz-BNs)showed ahigh reactivity toward nucleophiles, through which post-modifications are performable. The post-modification of Trz-BNs by L-cysteine was studied using cyclic voltammetry and differential pulsevoltammetry. Taking advantage of the scalable and straightforward functionalization as well as abilityof triazine functional groups for the controlled post-modifications, Trz-BNs is a promisingnanoplatform for a wide range of future applications.
Thin films (200-7nm) of the asymmetric polymer blend poly(vinyl methyl ether) (PVME)/polystyrene (PS) (25/75wt%) were investigated by broadband dielectric spectroscopy (BDS). Thicker samples ([Formula: see text]37 nm) were measured by crossed electrode capacitors (CEC), where the film is capped between Al-electrodes. For thinner films ([Formula: see text]37 nm) nanostructured capacitors (NSC) were employed, allowing one free surface in the film. The dielectric spectra of the thick films showed three relaxation processes ( [Formula: see text] -, [Formula: see text] - and [Formula: see text] -relaxation), like the bulk, related to PVME fluctuations in local spatial regions with different PS concentrations. The thickness dependence of the [Formula: see text] -process for films measured by CECs proved a spatially heterogeneous structure across the film with a PS-adsorption at the Al-electrodes. On the contrary, for the films measured by NSCs a PVME segregation at the free surface was found, resulting in faster dynamics, compared to the CECs. Moreover, for the thinnest films ([Formula: see text]26 nm) an additional relaxation process was detected. It was assigned to restricted fluctuations of PVME segments within the loosely bounded part of the adsorbed layer, proving that for NSCs a PVME enrichment takes place also at the polymer/substrate interface.
Metal carbides have shown great promise in a wide range of applications due to their unique catalytic, electrocatalytic and magnetic properties. However, the scalable production of dispersible metal carbide nanoparticles remains a challenge. Here, we report a simple and scalable route to dispersible iron carbide (Fe3C) nanoparticles. This uses MgO nanoparticles as a removable ‘cast’ to synthesize Fe3C nanoparticles from Prussian blue (KFeIII[FeII(CN)6]). Electron tomography demonstrates how nanoparticles of the MgO cast encase the Fe3C nanoparticles to prevent sintering and agglomeration during the high-temperature synthesis. The MgO cast is readily removed with ethylenediaminetetraacetic acid (EDTA) to generate Fe3C nanoparticles that can be used to produce a colloidal ferrofluid or dispersed on a support material.
The rational synthesis and use of nanomaterials require the characterization of many different properties, ranging from particle size and size distribution over surface chemistry to more applicationrelevant features like optical, electrochemical, and magnetic properties. In the following, several methods for the characterization of functional groups on nanomaterials, like polymer and silica nanoparticles, semiconductor quantum dots, and lanthanide-based upconversion nanocrystals are presented. Additionally, procedures for the measurement of the key spectroscopic performance parameters of nanomaterials with linear and nonlinear photoluminescence, such as the photoluminescence quantum yield, are presented for the UV/vis/NIR/SWIR.
Yb,Nd,Er-doped upconversion nanoparticles (UCNPs) have attracted considerable interest as luminescent reporters for bioimaging, sensing, energy conversion/shaping, and anticounterfeiting due to their capability to convert multiple near-infrared (NIR) photons into shorter wavelength ultraviolet, visible or NIR luminescence by successive absorption of two or more NIR photons. This enables optical measurements in complex media with very little background and high penetration depths for bioimaging. The use of Nd3+ as substitute for the commonly employed sensitizer Yb3+ or in combination with Yb3+ shifts the excitation wavelength from about 980 nm, where the absorption of water can weaken upconversion luminescence, to about 800 nm, and laser-induced local overheating effects in cells, tissue, and live animal studies can be minimized. To systematically investigate the potential of Nd3+ doping, we assessed the performance of a set of similarly sized Yb3+,Nd3+,Er3+-doped core- and core–shell UCNPs of different particle architecture in water at broadly varied excitation power densities (P) with steady state and time-resolved fluorometry for excitation at 980 nm and 808 nm. As a measure for UCNPs performance, the P-dependent upconversion quantum yield (Φ) and its saturation behavior were used as well as particle brightness (B). Based upon spectroscopic measurements at both excitation wavelengths in water and in a lipid phantom and B-based calculations of signal size at different penetration depths, conditions under which excitation at 808 nm is advantageous are derived and parameters for the further optimization of triple-doped UCNPs are given.
We present a comprehensive investigation of the magnetic and optical properties of an ytterbium complex, which combines two desirable and practical features into a single molecular system. Based upon YbIII Ions that promote near-infrared optical activity and a chemical backbone that is ideal for an in-depth understanding of the magnetic behaviour, we have designed a multifunctional opto-magnetic species that operates as a luminescent thermometer and as a single-molecule magnet (SMM). Our magnetic investigations, in conjunction with ab initio calculations, reveal one of the highest energy barriers reported for an YbIII-based complex. Moreover, we correlate this anisotropic barrier with the Emission spectrum of the compound, wherein we provide a complete assignment of the energetic profile of the complex. Such studies lay the foundation for the design of exciting multi-faceted materials that are able to retain information at the single-molecule level and possess built-in thermal self-monitoring capabilities.
There are different ways how to prove the quality of the results obtained by electron microscopy and related microanalysis techniques, e.g. use of validated standard operation procedures, participation in proficiency testing exercises, use of certified reference materials, etc. International standards are able to provide requirements, specifications, guidelines or characteristics of methods, instruments or samples with the final goal that these can be used consistently in accredited laboratories. In the field of electron microscopy and microbeam analysis standardization and metrology are terms which are encountered rather seldom at major conferences and scientific publications. Nevertheless, spectra formats like EMSA/MSA for spectral-data exchange or tagged image file format (TIFF) for SEM, guidelines for performing quality assurance procedures or for the specification of X-ray spectrometers as well as of certified reference materials (CRMs) in EPMA, or measurement of average grain size by electron backscatter diffraction (EBSD), or guidelines for calibrating image magnification in SEM or TEM are ISO standards already published and used successfully by a large part of the electron microscopy and microbeam analysis community. A main and continuous task of ISO/TC 202 and its subcommittees is to identify and evaluate feasible projects/proposals needed to be developed into new international standards, particularly in respect to recent but established technology, such the silicon drift detector (SDD) EDS one.
Another international platform in the frame of which pre-standardization work can be organized is VAMAS (Versailles Project on Advanced Materials and Standards). International collaborative projects involving aim at providing the technical basis for harmonized measurements, testing, specifications, and standards to be further developed at ISO level. One key point of VAMAS activities is constituted by inter-laboratory comparisons for high-quality data. In the field of microbeam analysis, the technical working area (TWA) 37 Quantitative Microstructural Analysis deals with corresponding projects. Good ideas, e.g. on analysis of low-Z materials/elements and at low energies are particularly encouraged by directly contacting the author. Support and already available guidance will be supplied.
A new method for top‐down, one‐pot, gram‐scale production of high quality nanographene by incubating graphite in a dilute sodium hypochlorite solution at only 40 °C is reported here. The produced sheets have only 4 at% oxygen content, comparable with nanographene grown by chemical vapor deposition. The nanographene sheets are covalently functionalized using a nondestructive nitrene [2+1] cycloaddition reaction that preserves their π‐conjugated system. Statistical analyses of Raman spectroscopy and X‐ray photoelectron spectroscopy indicate a low number of sp3 carbon atoms on the order of 2% before and 4% after covalent functionalization. The nanographene sheets are significantly more conductive than conventionally prepared nanographene oxide, and conductivity further increases after covalent functionalization. The observed doping effects and theoretical studies suggest sp2 hybridization for the carbon atoms involved in the [2+1] cycloaddition reaction leading to preservation of the π‐conjugated system and enhancing conductivity via n‐type doping through the bridging N‐atom. These methods are easily scalable, which opens the door to a mild and efficient process to produce high quality nanographenes and covalently functionalize them while retaining or improving their physicochemical properties.
This report describes a standard operation procedure for dispersion of nanomaterials in liquids prior to toxicological or ecotoxicological testing. Main factors, who determine the state of agglomeration and aggregation of ENMs after dispersion are specific energy input, particle concentration and fluid composition. The method was validated in two round robin tests, where two typical nanomaterials (a nanopowder and a nanodispersion) were investigated. One main result arising out of the data comparison was that only those participants, who were able to follow the instructions in the SOPs completely, received similar results regarding particle size and zeta potential. The SOP is easy to adapt for other types of nanomaterials. The results provide the standardization process and were presented at DIN working group.
The coherent exchange of optical near fields between two neighbouring dipoles plays an essential role in the optical properties, quantum dynamics and thus the function of many naturally occurring and artificial nanosystems. These interactions are challenging to quantify experimentally. They extend over only a few nanometres and depend sensitively on the detuning, dephasing and relative orientation (that is, the vectorial properties) of the coupled dipoles. Here, we introduce plasmonic nanofocusing spectroscopy to record coherent light scattering spectra with 5 nm spatial resolution from the apex of a conical gold nanotaper.
The apex is excited solely by evanescent fields and coupled to plasmon resonances in a single gold nanorod. We resolve resonance energy shifts and line broadenings as a function of dipole distance and relative orientation. We demonstrate how These phenomena arise from mode couplings between different vectorial components of the interacting optical near fields, specifically from the coupling of the nanorod to both transverse and longitudinal polarizabilities of the taper apex.
Cd-free I–III–VI group semiconductor quantum dots (QDs) like Ag–In–S and Cu–In–S show unstructured absorption spectra with a pronounced Urbach tail, rendering the determination of their band gap energy (Eg) and the energy structure of the exciton difficult. Additionally, the origin of the broad photoluminescence (PL) band with lifetimes of several hundred nanoseconds is still debated. This encouraged us to study the excitation energy dependence (EED) of the PL maxima, PL spectral band widths, quantum yields (QYs), and decay kinetics of AIS/ZnS QDs of different size, composition, and surface capping ligands. These results were then correlated with the second derivatives of the corresponding absorption spectra. The excellent match between the onset of changes in PL band position and spectral width with the minima found for the second derivatives of the absorption spectra underlines the potential of the EED approach for deriving Eg values of these ternary QDs from PL data. The PL QY is, however, independent of excitation energy in the energy range studied. From the EED of the PL features of the AIS/ZnS QDs we could also derive a mechanism of the formation of the low-energy electronic structure. This was additionally confirmed by a comparison of the EED of PL data of as-synthesized and size-selected QD ensembles and the comparison of these PL data with PL spectra of single QDs. These results indicate a strong contribution of intrinsic inhomogeneous PL broadening to the overall emission features of AIS/ZnS QDs originating from radiative transitions from a set of energy states of defects localized at different positions within the quantum dot volume, in addition to contributions from dimensional and chemical broadening. This mechanism was confirmed by numerically modelling the absorption and PL energies with a simple mass approximation for spherical QDs and a modified donor–acceptor model, thereby utilizing the advantages of previously proposed PL mechanisms of ternary QDs. These findings will pave the road to a deeper understanding of the nature of PL in quantum confined I–III–VI group semiconductor nanomaterials.
Porous materials play an important role in several fields of technology, especially for energy applications like photovoltaics, electrolysis or batteries. The activity of porous films is affected by properties like porosity, film thickness, chemical composition of the material as well as the crystallinity of the framework. The complex morphology of such porous films constitutes a challenge for modern analytical techniques and requires approaches employing the combination/complementation of data of different analytical methods. In this contribution we characterize thin mesoporous iridium-titanium mixed oxide film properties by spectroscopic ellipsometry (SE).
Mesoporous iridium oxide - titanium oxide (IrOx-TiOx) films were prepared via dip-coating of a solution containing a triblock-copolymer as structure-directing agent, an iridium precursor as well as a titanium precursor in ethanol. Deposited films with different amounts of iridium (0 wt%Ir to 100 wt%Ir) were synthesized and calcined in air. The thin films were analyzed with SE using the Bruggeman effective medium approximation (BEMA) for modelling. The results were compared with electron probe microanalysis (EPMA) as part of a combined SEM/EDS/STRATAGem Analysis.
The synthesis and characterization of a chemiluminescent metal–organic framework with high porosity is reported. It consists of Zr6O6(OH)4 nodes connected by 4,4′‐(anthracene‐9,10‐diyl)dibenzoate as the linker and luminophore. It shows the topology known for UiO‐66 and is therefore denoted PAP‐UiO. The MOF was not only obtained as bulk material but also as a thin film. Exposure of PAP‐UiO as bulk or film to a mixture of bis‐(2,4,6‐trichlorophenyl) oxalate, hydrogen peroxide, and sodium salicylate in a mixture of dimethyl and dibutyl phthalate evoked strong and long lasting chemiluminescence of the PAP‐UiO crystals. Time dependent fluorescence spectroscopy on bulk PAP‐UiO and, for comparison, on dimethyl 4,4′‐(anthracene‐9,10‐diyl)dibenzoate provided evidence that the chemiluminescence originates from luminophores being part of the PAP‐UiO, including the luminophores inside the crystals.
The comparison of different emitter classes and the rational design of the next generation of molecular and nanoscale reporters require accurate and quantitative photo-luminescence measurements. This is of special importance for all photoluminescence applications in the life and material sciences and nanobiophotonics. In the following, procedures for the determination of the spectroscopic key parameter photoluminescence quantum yield, i.e., the number of emitted per absorbed photons, in the UV/vis/NIR/SWIR are presented including pitfalls and achievable uncertainties and material-specific effects related to certain emitter classes are addressed.
Nonclassical crystallization typically occurs via the attachment of individual nanoparticles. Intuitively, materials synthesized via this route should exhibit pronounced surface roughness and porosity as a hallmark of the formation process via particle accretion. Here, we demonstrate that nonclassical mineralization of calcium carbonate allows synthesis of ultra-smooth and dense surfaces with unprece-dented root-mean-square roughness of 0.285 nm, simply by con-trolling the hydration state of the nanosized building blocks using Mg doping. High fidelity coating of corrugated substrates can even be achieved. Nonclassical crystallization can thus lead to space-filling inorganic solid-state materials transgressing the implicit porosity commonly expected for particle-driven self-organization processes.
Extraction of true, 3D shape (and size) of non-spherical nanoparticles (NPs) is associated with Errors by conventional 2D electron microscopy using projection images. Significant efforts within the ISO technical committee TC 229 ‘Nanotechnologies’ are aimed at establishing accurate TEM and SEM measurement of NP size and shape as robust, standard procedures. Study groups have been organizing inter-laboratory comparisons on well-selected NP systems according to the market needs, such as aggregated titania nano-powder for which size and shape distribution of primary crystallites of irregular shape must be measured accurately. To be noticed is e. g. the fact that the measurement procedure allows only manual selection of the particles clearly distinguishable for analysis as well as manual definition of the contour of the imaged NPs.
An inter-laboratory exercise on titania NPs (pure anatase, grown by hydrothermal synthesis) of well-defined non-spherical shape, i.e. bipyramidal, has been recently started within ISO/TC 229 under similar conditions as for the irregular shaped titania. In the TEM micrograph the particles tracked manually according to the measurement protocol. Overlapped particles were allowed to be considered, as long as they are clearly distinguishable. One decisive NP selection criterion was to analyze only those NPs with a roundness value below 0.7, i.e. the NPs laying on the support foil and, hence, with projection areas clearly deviating from perfect circles (R=1). The overall evaluation (for 15 labs) of the size descriptors (area, Feret, minFeret, perimeter) and shape descriptors (aspect ratio, roundness, compactness, extent) by analysis of variance is just to be finished and included in ISO/WD 21363 Nanotechnologies -- Protocol for particle size distribution by transmission electron microscopy.
The European Commission's recommendation on the definition of nanomaterial [2011/696/EU] is broadly applicable across different regulatory sectors and requires the quantitative size Determination of constituent particles in samples down to 1 nm. A material is a nanomaterial if 50 % or more of the particles are in the size range 1-100 nm. The implementation of the definition in a regulatory context challenges measurement methods to reliably identify nanomaterials and ideally also nonnanomaterials as substance or product ingredient as well as in various matrices.
The EU FP7 NanoDefine project [www.nanodefine.eu] addressed these challenges by developing a robust, readily implementable and cost-effective measurement strategy to decide for the widest possible range of materials whether it is a nanomaterial or not. It is based on existing and emerging particle measurement techniques evaluated against harmonized, material-dependent performance criteria and by intra- and inter-lab comparisons. Procedures were established to reliably measure the size of particles within 1-100 nm, and beyond, taking into account different shapes, coatings and chemical compositions in industrial materials and consumer products. Case studies prove their applicability for various sectors, including food, pigments and cosmetics.
A main outcome is the establishment of an integrated tiered approach including rapid screening (Tier 1) and confirmatory methods (tier 2), a decision support flow scheme and a user manual to guide end-users, such as manufacturers, in selecting appropriate methods. Another main product is the “NanoDefiner” e-Tool which implements the flow scheme in a user-friendly software and guides the user in a semi-automated way through the entire decision procedure. It allows a cost-effective selection of appropriate methods for material classification according to the EC's nanomaterial definition and provides a comprehensive report with extensive explanation of all decision steps to arrive at a transparent identification of nanomaterials as well as non-nanomaterials for regulatory
purposes.
Titanium dioxide is one of the most studied metal oxides due to its chemical, surface, electronic and (photo)catalytic properties, providing this material of multisectorial applications ranging from healthcare, photocatalysis, smart materials with self cleaning and self sterilizing properties and solar energy harvesting. However it is difficult to correlate the functional properties of TiO2 nanomaterials to the properties at single nanoparticle level due to the high polydispersity in shape, size and surface features of the currently available TiO2 nanoparticles (NPs). Although intensive experimental and theoretical studies have been conducted on the reactivity of different surfaces of metal oxides such as TiO2 much less attention is paid on the dependence of functional properties, like photocatalytic activity, dye adsorption, open circuit potential and fill factor in dye sensitized solar cells, on crystal facets in different orientations. One of the goal of SETNanoMetro project was the development of design rules to tune crystal facets of TiO2 NPs in order to optimize and control functional properties. In the present work we have developed a series of design rules in order to obtain sets of anatase TiO2 NPs with low polydispersity and to tune their shape and size by hydrothermal processing of Ti(IV)-
Triethanolamine complex in presence of different shape controllers. Through a careful experimental design, a predictive soft model was developed. The model is able to predict the synthesis outcome allowing to tune the shape factor from 5 (prisms) to 1.5 (bipyramids) to 0.2 (platelets). This allows to control the main crystal facets exposed ranging from (100) to (001). Due to the dependence of functional properties of nanomaterials on shape distribution and not only size, the availability of NPs sets with uniform and well defined and tunable shapes can be of paramount relevance in order to produce reference nanomaterials for shape measurement.
The motivation and the measurement setup for large fast-scanning piezoresistive cantilevers are presented. The theory behind the measurements of mechanical properties through contact resonance is explained. Results of such measurements on two kinds of polymer are compared to results from force distance curves. Noise, time-dependency and dependency of the results on the vibration mode are identified as challenges of contact resonance.
At the Stakeholder meeting of the EMPIR project “Multifunctional ultrafast microprobes for on-the-machine measurements”, details about two measurement modes were presented. Force distance curves and contact resonance measurements are compared. The basic principles are explained and exemplary measurements concerning mechanical properties of polymers are shown.
Force-distance curves have been recorded on thin films of lubricants. The lubricants wet the AFM tip, which causes a capillary force. This force depends on the shape of the tip, as well as on physical properties like viscosity and surface tension, which have been determined additionally with other methods. This way, their influence on the shape of the curves could be analyzed.
Organic and inorganic nanoparticles (NPs) are increasingly used as drug carriers, fluorescent sensors, and multimodal labels in the life and material sciences. These applications require knowledge of the chemical nature, total number of surface groups, and the number of groups accessible for subsequent coupling of e.g., antifouling ligands, targeting bioligands, or sensor molecules. To establish the concept of catch-and-release assays, cleavable probes were rationally designed from a quantitatively cleavable disulfide moiety and the optically detectable reporter 2-thiopyridone (2-TP). For quantifying surface groups on nanomaterials, first, a set of monodisperse carboxy-and amino-functionalized, 100 nm-sized polymer and silica NPs with different surface group densities was synthesized. Subsequently, the accessible functional groups (FGs) were quantified via optical spectroscopy of the cleaved off reporter after its release in solution. Method validation was done with inductively coupled plasma optical emission spectroscopy (ICP-OES) utilizing the sulfur atom of the cleavable probe. This comparison underlined the reliability and versatility of our probes, which can be used for surface group quantification on all types of transparent, scattering, absorbing and/or fluorescent particles. The correlation between the total and accessible number of FGs quantified by conductometric titration, qNMR, and with our cleavable probes, together with the comparison to results of conjugation studies with differently sized biomolecules reveal the potential of catch-and-release reporters for surface analysis. Our findings also underline the importance of quantifying particularly the accessible amount of FGs for many applications of NPs in the life sciences.
Nanoporous media exhibit structures significantly smaller than the wavelengths of visible light and can thus act as photonic metamaterials. Their optical functionality is not determined by the properties of the base materials, but rather by tailored, multiscale structures, in terms of precise pore shape, geometry, and orientation. Embedding liquid crystals in pore space provides additional opportunities to control light–matter interactions at the single-pore, meta-atomic scale. Here, we present temperature-dependent 3D reciprocal space mapping using synchrotron-based X-ray diffraction in combination with high-Resolution birefringence experiments on disk-like mesogens (HAT6) imbibed in self-ordered arrays of parallel cylindrical pores 17 to 160 nm across in monolithic anodic aluminium oxide (AAO). In agreement with Monte Carlo computer simulations we observe a remarkably rich self-assembly behaviour, unknown from the bulk state. It encompasses transitions between the isotropic liquid state and discotic stacking in linear columns as well as circular concentric ring formation perpendicular and parallel to the pore axis. These textural transitions underpin an optical birefringence functionality, tuneable in magnitude and in sign from positive to negative via pore size, pore surface-grafting and temperature. Our study demonstrates that the advent of large-scale, self-organised nanoporosity in monolithic solids along with confinement-controllable phase behaviour of liquid-crystalline matter at the single-pore scale provides a reliable and accessible tool to design materials with adjustable optical anisotropy, and thus offers versatile pathways to finetune polarisation-dependent light propagation speeds in materials. Such a tailorability is at the core of the emerging field of transformative optics, allowing, e.g., adjustable light absorbers and extremely thin metalenses.
We report the synthesis and characterization of carbon nanodots (CDs) with high quantum yield (>50%) and tailored optical absorption as well as emission properties. A well-described protocol with polyethyleneimine (PEI) as amine precursor is used as a reference to a new CD system which is stabilized by aromatic 2,3-diaminopyridine (DAP) molecules instead. The DAP stabilizer is installed in order to red-shift the absorption peak of the n-π* electron transition allowing efficient radiative recombination and light emission. Size, shape, and chemical composition of the samples are determined by (HR)TEM, EDX and FTIR-spectroscopy. Optical parameters are investigated using UV-VIS, PL and QY measurements. Several parameters such as concentration, excitation wavelength and pH are studied. Zeta-potential analysis indicate that pH-induced (de-)protonation processes of functional moieties directly affect the n-π* energy bands. This results in unique pH-dependent absorption and emission characteristics which are discussed on the specific chemical composition of each CD system.
Eleventh canSAS Meeting: International Cooperation and Collaboration in Small-Angle Scattering
(2019)
The eleventh canSAS workshop was held in Freising, Germany, July 8–10, 2019.
These international meetings, promoting collective action for nomadic small-angle scatterers, have been taking place since 1998 and act as forums to catalyze cooperation amongst the SAS community in order to provide better facilities and equipment, combined with reliable data interpretation and analysis. The meeting attracted over 60 participants from major neutron and X-ray laboratories, as well as manufacturers of SAXS equipment, and users from academia and industry. There was also a wide geographical spread with participants from Australia, Asia, and North America joining European colleagues.
The influence of size effects on the thermoelectric properties of thin platinum films is investigated and compared to the bulk. Structural properties, like the film thickness and the grain size, are varied. We correlate the electron mean free path with the temperature dependence of the electrical conductivity and the absolute Seebeck coefficient SPt of platinum. A measurement platform was developed as a standardized method to determine SPt and show that SPt,film is reduced compared to SPt,bulk. Boundary and surface scattering reduce the thermodiffusion and the phonon drag contribution to SPt,film by nearly the same factor. We discuss in detail on behalf of a model, which describes the temperature dependence of the absolute Seebeck coefficient, the influence of size effects of electron-phonon and phonon-phonon interaction on SPt.
In this paper, the influence of the bulk temperature (BT) of Polycarbonate (PC) on the occurrence and growth of Laser-induced Periodic Surface Structures (LIPSS) is studied. Ultrashort UV laser pulses with various laser peak fluence levels F_0 and various numbers of overscans (N_OS) were applied on the surface of pre-heated Polycarbonate at different bulk temperatures. Increased BT leads to a stronger absorption of laser energy by the Polycarbonate. For N_OS < 1000 High Spatial Frequency LIPSS (HSFL), Low Spatial Frequency LIPSS perpendicular (LSFL-I) and parallel (LSFL-II) to the laser polarization were only observed on the rim of the ablated tracks on the surface but not in the center of the tracks. For N_OS ≥ 1000 , it was found that when pre-heating the polymer to a BT close its glass transition temperature (T_g), the laser fluence to achieve similar LIPSS as when processed at room temperature decreases by a factor of two. LSFL types I and II were obtained on PC at a BT close to T_g and their periods and amplitudes were similar to typical values found in the literature. To the best of the author’s knowledge, it is the first time both LSFL types developed simultaneously and consistently on the same sample under equal laser processing parameters. The evolution of LIPSS from HSFL, over LSFL-II to LSFL I, is described, depending on laser peak fluence levels, number of pulses processing the spot and bulk temperature.
Organic and inorganic micro- and nanoparticles are increasingly used as drug carriers, fluorescent sensors, and multimodal labels in the life and material sciences. Typically, these applications require further functionalization of the particles with, e.g., antifouling ligands, targeting bioligands, stimuli-responjsive caps, or sensor molecules. Besides serving as an anchor point for subsequent functionalization, the surface chemistry of these particles also fundamentally influences their interaction with the surrounding medium and can have a significant effect on colloidal stability, particle uptake, biodistribution, and particle toxicity in biological systems. Moreover, functional groups enable size control and tuning of the surface during the synthesis of particle systems.
For these reasons, a precise knowledge of the chemical nature, the total number of surface groups, and the number of groups on the particle surface that are accessible for further functionalization is highly important. In this contribution, we will will discuss the advantages and limitiations of different approaches to quantify the amount of commonly used surface functional groups such as amino,[1,2] carboxy,[1,2] and aldehyde groups.[3] Preferably, the quantification is carried out using sensitive and fast photometric or fluorometric assays, which can be read out with simple, inexpensive instrumentation and can be validated by complimentary analytic techniques such as ICP-OES and quantitative NMR.
Laser-induced periodic surface structures (LIPSS, ripples) are a universal phenomenon that can be observed on almost any material after the irradiation by linearly polarized laser beams, particularly when using ultrashort laser pulses with durations in the femtosecond to picosecond range. During the past years significantly increasing industrial and research activities have been reported in the field of LIPSS, since their generation in a single-step process provides a simple way of nanostructuring and surface functionalization towards the control of optical, mechanical or chemical surface properties. In this contribution the mechanisms of formation and current trends and applications of LIPSS are reviewed, including the colorization of technical surfaces, the control of surface wetting properties, the mimicry of the natural texture of animals, the tailoring of surface colonization by bacterial biofilms, the advancement of leadless medical pacemakers, and the improvement of the tribological performance of nanostructured metal surfaces.
The properties of fiber-reinforced polymers (CFRP) or concretes (ECC) strongly depend on the interface between the fiber and the surrounding matrix. Different methods such as plasma oxidation, chemical or electrolytic etching and chemical vapor deposition have been investigated to increase, for example, the bonding strength. The present study deals with the functionalization of the fiber surface based on laser-induced periodic surface structures (LIPSS). They can be characterized as a modulation of the surface topography on the nano- and microscale that results from the irradiation of the surface with linearly polarized laser radiation close to the ablation threshold. According to their spatial period, LIPSS are classified into low-spatial frequency LIPSS (LSFL) and high-spatial frequency LIPSS (HSFL). The great potential of both types of LIPSS structures regarding functional surface properties was demonstrated in numerous investigations. The objective of the present study was the homogenous manufacturing of both types of LIPSS on large areas of carbon fiber arrangements without damage. The results are discussed based on a detailed analysis of the topographic and chemical surface properties.
Neuartige Materialien, die bekannte (Werk-)Stoffe mit neuen Funktionalitäten ausstatten, spielen eine zunehmend wichtige Rolle im Bereich der Materialforschung und -prüfung. Das Spektrum neuartiger Materialien reicht von der gezielten Oberflächenfunktionalisierung und -strukturierung makroskopischer Materialien, dünnen Beschichtungen bis hin zu mikro- und nanoskaligen Kompositmaterialien und funktionalen Materialien an der Schnittstelle zur Biologie, Biotechnologie, nachhaltige Energiespeicherung und Sensorik. Dabei bieten neuartige Materialien die Chance, Werkstoffe und Produkte mit erweiterter oder verbesserter Funktionalität zu erhalten und Sicherheit bereits im Designprozess zu berücksichtigen. Durch dieses breite Anwendungsspektrum und die Herausforderungen, die solche Materialien für die Sicherheit in Chemie und Technik mit sich bringen, sind diese in allen Themenfeldern der BAM repräsentiert (Material, Analytical Sciences, Energie, Infrastruktur und Umwelt).
Die Aufgaben der BAM erstrecken sich dabei von der Herstellung von Referenzmaterialien für Industrie, Forschung und Regulation, über die Erstellung von standardisierten Referenzverfahren für nachhaltige Messungen im Umwelt- und Lebenswissenschaftsbereich bis hin zur Bereitstellung von belastbaren und zitierbaren Referenzdaten. Durch die genaue Charakterisierung neuartiger Materialien können potentiell problematische Substanzen identifiziert und deren Risiken besser abgeschätzt werden. In diesem Beitrag werden einige aktuelle Beispiele aus diesen Bereichen vorgestellt.
Laser-induced periodic surface structures (LIPSS, ripples) are a universal phenomenon that can be observed on almost any material after the irradiation by linearly polarized laser beams, particularly when using ultrashort laser pulses with durations in the femtosecond to picosecond range. During the past years significantly increasing industrial and research activities have been reported in the field of LIPSS, since their generation in a single-step process provides a simple way of nanostructuring and surface functionalization towards the control of optical, mechanical, biological, or chemical surface properties. In this contribution the mechanisms of formation and current trends and applications of LIPSS are reviewed, including the colorization of technical surfaces, the control of surface wetting properties, the mimicry of the natural texture of animals, the tailoring of surface colonization by bacterial biofilms, the advancement of leadless medical pacemakers, and the improvement of the tribological performance of nanostructured metal surfaces.
Non-linear optical emitters are promising materials for energy applications and biotechnologies. Solid-state multi-band emitters like lanthanide doped up-conversion nanoparticles (UCNPs) show excellent photostability, are excitable in the near infrared (NIR), and show emission bands from the UV to SWIR spectral regions. The optical properties of these materials strongly depend on the excitation power density, i.e., the number of photons absorbed per time interval. The upconversion (ΦUC) and downshifting quantum efficiencies (ΦDS) of these materials, the excitation power dependent population, and the deactivation dynamics are influenced by nanoparticle architecture, doping concentration, and the microenvironment. We studied the fundamental changes of the luminescence properties of ß-NaYF4 UCNPs doped with Yb3+ and Er3+ depending on size, different surroundings such as aqueous and organic media, and different surface chemistries. We obtained further insights into shelling procedures, FRET optimization, influence of doping concentration, and advantages of different sensitizer ions.
In den vergangen Jahren hat das Umweltbewusstsein in der Bevölkerung stark zugenommen und somit auch das Interesse an der Vermeidung von anthropogenen (Schad-)Stoffen in der Umwelt. Eine (neue) Substanzklasse, deren Umweltauswirkungen noch nicht vollständig untersucht sind und die in den vergangenen Jahren immer mehr an Bedeutung gewonnen hat, sind (metallbasierte) Nanomaterialien. Im Gegensatz zu bspw. Elementspezies weisen Nanomaterialien eine Vielzahl von Eigenschaften auf und lassen sich nicht über nur ein Merkmal beschreiben - dies stellt eine große analytische Herausforderung dar. Hier haben sich vor allem die Feld-Fluss-Fraktionierung (AF4) und die single-particle-ICP-MS als leistungsstarke analytische Methoden herausgestellt. In (aquatischen) Umweltmatrizes (z.B. Oberflächengewässern) liegen neben artifiziellen auch natürliche Partikel vor, was eine weitere große Herausforderung für den Nachweis von Nanomaterialien darstellt.
Neben dem Nachweis von anthropogenen Stoffen in der Umwelt ist zudem deren ökotoxikologische Bewertung wichtig. In der aquatischen Ökotoxikologie werden hierzu Testorganismen mit den jeweiligen Substanzen über die Wasserphase exponiert. Effektkonzentrationen (EC50) werden dabei auf Basis der Konzentrationen in der Wasserphase abgeleitet - tatsächlich bioakkumulierte Mengen werden hierbei jedoch meist nicht ermittelt; eine weitere große Herausforderung besteht zudem in der Bewertung von Mischungstoxizitäten. Gängige Testorganismen sind u.a. Kieselalgen (Diatomeen). Diatomeen stehen am Anfang der Nahrungskette - toxikologisch relevante Metalle/Nanomaterialien können sich hierüber im Nahrungsnetz der Oberflächengewässer anreichern und ggf. nachhaltig auswirken.
Im ersten Teil des Vortrages werden zunächst neue elementanalytische Methoden zum Nachweis von metallbasierten Nanopartikeln in Umweltmatrizes auf Basis der AF4/ICP-SFMS sowie stabilen Isotopenlabeln am Beispiel von Eisennanopartikeln vorgestellt.
Im zweiten Teil wird eine neue elementanalytische Methode als komplementäre Technik zur ökotoxikologischen Bewertung von (Schad-)Stoffen vorgestellt. Die neue Methode basiert auf der on-line Kopplung von HPLC mit der single-cell-ICP-(ToF)-MS (sc-ICP-(ToF)-MS) [1, 3-5]. Hierüber konnten wir erfolgreich die automatisierte Multielementanalytik einzelner Diatomeen realisieren und zur Analyse von mit Metallen inkubierten Diatomeen (cyclotella meneghiniana) einsetzen. Wir konnten zeigen, dass die sc-ICP-ToF-MS zukünftig eine leistungsstarke, komplementäre Technik in der aquatischen Ökotoxikologie zum z.B. Test von Metallen und Nanomaterialien darstellt.
Multiplexed encoding schemes of nano- and micrometer sized particles with fluorescent dyes or quantum dots (QDs) and their optical detection, are of increasing interest for applications in the life sciences, for example in flow cytometry. Almost all strategies utilizing fluorescence focus on spectrally distinguishable emission bands or colors and different intensity levels as fluorescence codes. The fluorescence parameter lifetime has been, however, barely exploited. In this work the goal is to perform multiplexing with encoding fluorophores with different fluorescence lifetimes (LTs). In comparison to the spectral multiplexing strategies this has the advantage, that the different fluorescence LT codes can be measured with the excitation and emission wavelength, thus reducing instrument costs. Moreover, LTs should not depend on emitter concentration. Unlike organic dyes, the LTs of which are typically < 10 ns, the fluorescence LTs of ternary semiconductor QDs that represent a “green” alternative to conventional Cd-containing QDs are in the range of several hundred ns, independent of oxygen concentration, and can be tuned to a certain extent by chemical composition and surface chemistry. This present a time region that can be barely covered by other emitters that have either much shorter or longer lifetimes. In this project, different encoding strategies will be assessed and the encoded particles will be then used for fluorescence assays for the analysis of several targets in parallel. Therefor the encoded particles will be functionalized with different target-specific bioligands and read out with a specifically designed flow cytometer enabling time-resolved fluorescence detection. With this instrument, the particles will be discriminated by their fluorescence LTs In one detection channel while the analytes will be quantified by fluorescence labels in a second channel in the intensity domain.
This presentation reviews the current state in the field of Laser-induced Periodic Surface Structures (LIPSS). These surface nanostructures are a universal phenomenon and can be generated on almost any material by irradiation with intense linearly polarized laser radiation. LIPSS are formed in a “self-ordered” way and are often accompanying material processing applications. They can be produced following a single-step process and enable surface functionalization through the adaption of optical, mechanical and chemical surface properties. Their structural sizes typically range from several micrometers down to less than 100 nanometers exhibiting a clear correlation with the polarization direction of the laser radiation. Various types of surface structures are classified, relevant control parameters are identified, and their material specific formation mechanisms are analyzed for different types of inorganic solids, i.e., metals, semiconductors, and dielectrics, through time-resolved optical experiments and theoretical simulations. Finally, technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.
A concept for the growth of silica shells with a thickness of 5–250 nm onto oleate-coated NaYF4:Yb3+/Er3+ upconversion nanoparticles (UCNP) is presented. The concept enables the precise adjustment of shell thicknesses for the preparation of thick-shelled nanoparticles for applications in plasmonics and sensing. First, an initial 5–11 nm thick shell is grown onto the UCNPs in a reverse microemulsion. This is followed by a stepwise growth of these particles without a purification step, where in each step equal volumes of tetraethyl orthosilicate and ammonia water are added, while the volumes of cyclohexane and the surfactant Igepal® CO-520 are increased so that the ammonia water and surfactant concentrations remain constant. Hence, the number of micelles stays constant, and their size is increased to accommodate the growing core–shell particles. Consequently, the formation of core-free silica particles is suppressed. When the negative zeta potential of the particles, which continuously decreased during the stepwise growth, falls below −40 mV, the particles can be dispersed in an ammoniacal ethanol solution and grown further by the continuous addition of tetraethyl orthosilicate to a diameter larger than 500 nm. Due to the high colloidal stability, a coalescence of the particles can be suppressed, and single-core particles are obtained. This strategy can be easily transferred to other nanomaterials for the design of plasmonic nanoconstructs and sensor systems.
Surface functionalization of 2D- and 3D-supports and nanomaterials are nowadays at the core of many applications of functional materials in the life and material sciences. Examples range from membranes and microarrays over bead-based assays, immunoseparation, and next generation sequencing to nanometer-sized optical reporters, nanosensors, and magnetic and optical contrast agents. Typically performed functionalization procedures include silanization and grafting reactions with reactive monomers to introduce functional groups like amino or carboxylic acid groups and the attachment of ligands like polyethylene glycol (PEG) molecules and biomolecules such as peptides, proteins, and DNA.[1-3]
We present here a versatile concept to quantify the number of bioanalytically relevant functional groups like carboxyl, amino, and aldehyde moieties through the specific binding and subsequent release of small reporter molecules such as fluorescent dyes and non-fluorescent chromophores utilizing cleavable linkers or the formation of cleavable bonds as a reversible covalent labeling strategy. This is representatively demonstrated for different types of nano- and microparticles with different labeling densities of carboxyl, amino, and aldehyde groups. This strategy enables to separate the signal-generating molecule from the bead surface, thereby circumventing uncertainties associated with light scattering, binding-induced changes in reporter fluorescence, and fluorescence quenching dye-dye interactions on crowded material surfaces.[1-3] Moreover, the reporters are chosen to be detectable with different analytical methods as prerequisite for straightforward validation via method compari-sons and mass balances. Applications of these assays and multimodal cleavable probes range from a quantitative comparison of bead batches and process control to a qualitative prediction of the coupling efficiencies in bioconjugation reactions.
Different types of optical spectroscopies are introduced with special emphasis on method-inherent limitations and reliable instrument calibration and performance validation. In addition, procedures for the determination of spectroscopic key parameters like the photoluminescence quantum yield are presented including required instrument calibrations and material-specific effects related to certain emitters.
Mesoporous phosphates are a group of nanostructured materials with promising applications, particularly in biomedicine and catalysis. However, their controlled synthesis via conventional template-based routes presents a number of challenges and limitations. Here, we show how to synthesize a mesoporous Magnesium phosphate with a high surface area and a well-defined pore structure through thermal decomposition of a crystalline struvite (MgNH4PO4·6H2O) precursor. In a first step, struvite crystals with various morphologies and sizes, ranging from a few micrometers to several millimeters, had been synthesized from supersaturated aqueous solutions (saturation index (SI) between 0.5 and 4) at ambient pressure and temperature conditions. Afterwards, the crystals were thermally treated at 70–250 °C leading to the release of structurally bound water (H2O) and ammonia (NH3). By combining thermogravimetric analyses (TGA), scanning and transmission electron microscopy (SEM, TEM), N2 sorption analyses and small- and wide-angle X-ray scattering (SAXS/WAXS) we show that this decomposition process results in a pseudomorphic transformation of the original struvite into an amorphous Mg-phosphate. Of particular importance is the fact that the final material is characterized by a very uniform mesoporous structure with 2–5 nm wide pore channels, a large specific surface area of up to 300 m2 g−1 and a total pore volume of up to 0.28 cm3 g−1. Our struvite decomposition method is well controllable and reproducible and can be easily extended to the synthesis of other mesoporous phosphates. In addition, the so produced mesoporous material is a prime candidate for use in biomedical applications considering that Magnesium phosphate is a widely used, non-toxic substance that has already shown excellent biocompatibility and biodegradability.
The molecular mobility of the highly asymmetric miscible blend poly(vinyl methyl ether)/polystyrene was investigated by broadband dielectric (frequency range 10^-1 Hz – 10^9 Hz) and specific heat spectroscopy (frequency range 10^1 Hz – 10^4 Hz). The dielectric spectra revealed a complex molecular dynamic behavior, where three different relaxation processes were observed. At temperatures below the glass transition temperature an α´-relaxation was found, with an Arrhenius-like temperature dependence of its relaxation rates. It is assigned to localized fluctuations of the confined PVME segments within a frozen glassy matrix dominated by PS. Above the thermal glass transition temperature two processes with a VFT behavior of their relaxation rates were detected called α1- and α2-relaxation, both originating from PVME dipoles fluctuating in PS-rich environments, however with diverse PS concentrations. The relevant length scales for the processes are assumed to be different, corresponding to the Kuhn segment length for the former relaxation and to the CRR for the latter one. The observed multiple glassy dynamics result from spatial local compositional heterogeneities on a microscopic level. Additionally, SHS investigations were performed for the first time for this system, proving an existence of a fourth relaxation process (α3-relaxation) due to the cooperative fluctuations of both PS and PVME segments. The separation between the thermal α3- and dielectric α2-relaxation increases dramatically with increasing polystyrene concentration, proving that the thermal response is dominated by PS.
Broadband dielectric spectroscopy in the frequency range from 10-1 to 109 Hz is employed to revisit the segmental dynamics of the miscible blend system poly(vinyl methyl ether)/polystyrene (PVME/PS) in dependence on the composition firstly in the bulk state. Here especially the case of high polystyrene concentrations is considered. It is important to note that only the molecular dynamics of PVME segments as affected by PS is observed because the dipole moment of polystyrene is negligible. Three relaxation processes are found which are due to fluctuations of differently constrained or confined PVME segments. The degree of the confinement of PVME segments due to PS is discussed in dependence on the composition.
Further a spatial confinement is considered by investigating thin films of the PVME/PS blend where the film thickness was varied from 100 nm down to 5 nm. Two concentrations of PVME/PS (50/50 wt% and 25/75 wt%) are investigated. To measure nanometer thick films a novel electrode system based on nanostructured electrodes was employed. Nanostructured electrodes can be considered as a cut-edge technology in dielectric spectroscopy. The relaxation spectra of the films showed multiple processes which are discussed in dependence on the film thickness.
The phase behavior and molecular ordering of hexakishexyloxy triphenylene (HAT6) DLC under cylindrical nanoconfinement is studied utilizing differential scanning calorimetry (DSC) and dielectric spectroscopy (DS), where cylindrical nanoconfinement is established through embedding HAT6 into the nanopores of anodic aluminum oxide membranes (AAO), and a silica membrane with pore diameters ranging from 161 nm down to 12 nm. Both unmodified and modified pore walls were considered, and in the latter case the pore walls of AAO membranes were chemical treated with n octadecylphosphonic acid (ODPA) resulting in the formation of a 2.2 nm thick layer of grafted alkyl chains. Phase transition enthalpies decrease with decreasing pore size, indicating that a large proportion of the HAT6 molecules within the pores has a disordered structure, which increases with decreasing pore size for both pore walls. In the case of the ODPA modification the amount of ordered HAT6 is increased compared to the unmodified case. The pore size dependencies of the phase transition temperatures were approximated using the Gibbs Thomson equation, where the estimated surface tension is dependent on the molecular ordering of HAT6 molecules within the pores and upon their surface. DS was employed to investigate the molecular ordering of HAT6 within the nanopores. These investigations revealed that with a pore size of around 38 nm, for the samples with the unmodified pore walls, the molecular ordering changes from planar axial to homeotropic radial. However, the planar axial configuration, which is suitable for electronic applications, can be successfully preserved through ODPA modification for most of the pore sizes.
We investigate the nearfield dipole mobility of protein membranes in a wide frequency range from 3 kHz to 10 GHz. The results of our nanoscale dielectric images and spectra of bacteriorhodopsin (bR) reveal Debye relaxations with time constants of τ ∼ 2 ns and τ ∼ 100 ns being characteristic of the Dipole moments of the bR retinal and α-helices, respectively. However, the dipole mobility and therefore the protein biophysical function depend critically on the amount of surface water surrounding the protein, and the characteristic mobility in the secondary structure is only observed for humidity levels <30%. Our results have been achieved by adding the frequency as a second fundamental dimension to quantitative dielectric microscopy. The key elements for the success of this advanced technique are the employed heterodyne detection scheme, the broadband electrical signal source, a high frequency optimized cabling, development of calibration procedures and precise finite element modelling. Our study demonstrates the exciting possibilities of broadband dielectric microscopy for the investigation of dynamic processes in cell bioelectricity at the individual molecular level. Furthermore, the technique may shed light on local dynamic processes in related materials science applications like semiconductor Research or nano-electronics.
Overview about the surface initiated microstructure formation in glass surfaces. Samples which are exposed to a temperature treatment, can develop a crystalline microstructure above Tg at the surface. These separated crystals can be preferably oriented towards the surface of the sample. First experiments about the origin of these orientation phenomenon as well as the potentially causing mechanisms are presented and discussed within the presentation.
Synthetic microswimmers mimicking biological movements at the microscale have been developed in recent years. Actuating helical magnetic materials with a homogeneous rotating magnetic field is one of the most widespread techniques for propulsion at the microscale, partly because the actuation strategy revolves around a simple linear relationship between the actuating field frequency and the propeller velocity.
However, full control of the swimmers’ motion has remained a challenge. Increasing the controllability of micropropellers is crucial to achieve complex actuation schemes that, in turn, are directly relevant for numerous applications. However, the simplicity of the linear relationship limits the possibilities and flexibilities of swarm control. Using a pool of randomly shaped magnetic microswimmers, we show that the complexity of shape can advantageously be translated into enhanced control. In particular, directional reversal of sorted micropropellers is controlled by the frequency of the actuating field. This directionality change is linked to the balance between magnetic and hydrodynamic forces. We further show an example of how this behavior can experimentally lead to simple and effective sorting of individual swimmers from a group. The ability of these propellers to reverse swimming direction solely by frequency increases the control possibilities and is an example for propeller designs, where the complexity needed for many applications is embedded directly in the propeller geometry rather than external factors such as actuation sequences.