8.0 Abteilungsleitung und andere
Filtern
Dokumenttyp
- Zeitschriftenartikel (121) (entfernen)
Schlagworte
- Thermography (23)
- NDT (11)
- Non-destructive testing (9)
- Additive manufacturing (8)
- Laser thermography (8)
- Additive Manufacturing (7)
- Infrared thermography (6)
- GFRP (5)
- Machine learning (5)
- Super resolution (5)
- Internal defects (4)
- Process monitoring (4)
- Pulsed thermography (4)
- Active thermography (3)
- Concrete (3)
- Corrosion (3)
- Defect detection (3)
- Defect reconstruction (3)
- FEM (3)
- LIBS (3)
- Laser powder bed fusion (L-PBF) (3)
- Magnetocaloric effect (3)
- Moisture (3)
- NMR relaxometry (3)
- Numerical simulation (3)
- Selective laser melting (SLM) (3)
- Spectral induced polarization (3)
- Thermal conductivity (3)
- Thermografie (3)
- AISI 316L (2)
- Active thermal imaging (2)
- Additive manufacturing (AM) (2)
- Analytical model (2)
- Beton (2)
- Building materials (2)
- Cement (2)
- Compressed sensing (2)
- Computed Tomography (2)
- Computed tomography (2)
- Data fusion (2)
- Data processing (2)
- Delamination (2)
- Flash thermography (2)
- Heat accumulation (2)
- Image quality (2)
- In situ monitoring (2)
- Inspection (2)
- Inter layer time (2)
- Joint sparsity (2)
- Laminography (2)
- Laser (2)
- Laser Powder Bed Fusion (2)
- Laser Thermography (2)
- Machine Learning (2)
- Materials informatics (2)
- Mechanical properties (2)
- Micro-computed tomography (2)
- Neural network (2)
- Nuclear magnetic resonance (2)
- Oberflächenschutzsystem (2)
- Optical tomography (2)
- Photothermal (2)
- Pore space (2)
- Quantification (2)
- Radiography (2)
- Reliability (2)
- Residual Stress (2)
- Selective Laser Melting (SLM) (2)
- Semitransparent (2)
- Sequential learning (2)
- Thermal wave (2)
- Thermomagnetic generator (2)
- VCSEL (2)
- X-ray computed tomography (2)
- Zerstörungsfreie Prüfung (2)
- µ-CT (2)
- 2D model (1)
- 2PP (1)
- 3D particle analysis (1)
- 3D printing (1)
- 3D visualization (1)
- ADMM (1)
- AGIL (1)
- Ab initio calculations (1)
- Absorptance (1)
- Absorption (1)
- Absorption coefficient (1)
- Additive Fertigung (1)
- Additive Manufacturing (AM) (1)
- Afterglow (1)
- Air-conditioning (1)
- Alkali Activated Concrete (1)
- Alkali-activated binders (1)
- Alkali-activated building materials (1)
- Art restauration (1)
- Artificial Neural Networks (1)
- Artificial neural networks (1)
- Artificial weathering (1)
- Atomic Scale (1)
- Automated image analysis (1)
- Automation (1)
- Automatisierung (1)
- BPF-LB/M (1)
- Beam hardening (1)
- Betonbeschichtung (1)
- Bildqualität (1)
- Blind structured illumination (1)
- Block regularization (1)
- Block-sparsity (1)
- Brittle fracture (1)
- CFRP (1)
- Calibration (1)
- Canny approach (1)
- CdTe sensor (1)
- Cellular substructure (1)
- Cement hydration (1)
- Characterisation (1)
- Chloride (1)
- Chlorine (1)
- Circular economy (1)
- Civil Engineering (1)
- Civil engineering (1)
- Classification (1)
- Cold to fast neutron testing (1)
- Comparative operational characteristics (1)
- Composite (1)
- Composite Pipes (1)
- Composite materials (1)
- Compression strength (1)
- Compression test (1)
- Computed radiography (CR) (1)
- Computed tomography (CT) (1)
- Computertomographie (1)
- Comressed Sensing (1)
- Construction and demolition waste (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Coupling (1)
- Crack detection (1)
- Crack evolution (1)
- Cracks (1)
- Cross laminography (1)
- Cyber-Physical Systems (1)
- DLP (1)
- DMD (1)
- Damage analysis (1)
- Damage characterization (1)
- Data Fusion (1)
- Data Processing (1)
- Data Set (1)
- Data driven design (1)
- Data infrastructures (1)
- Data reconstruction (1)
- Data-driven material design (1)
- Data-driven materials design (1)
- Data-integration (1)
- Datenfusion (1)
- Debond (1)
- Deep unfolding (1)
- Defect evaluation (1)
- Delaminations (1)
- Dentin (1)
- Detail detection (1)
- Digital Detector Array (DDA) (1)
- Digital Radiography (1)
- Digital light processing (1)
- Digital micromirror device (1)
- Digital radiography (1)
- Digital representations (1)
- Digital workflows (1)
- Digitale Radiographie (1)
- Digitalisierung (1)
- Digitisation (1)
- Direct Energy Deposition (1)
- Direct laser writing (1)
- Discharge arc (1)
- Dispersion (1)
- Drywood termite (1)
- Dual Energy Imaging (1)
- Dwell-time (1)
- Eddy-current testing (1)
- Effusivity (1)
- Elastic net (1)
- Electronic, optical and magnetic materials (1)
- Emissivity (1)
- Emisssivity (1)
- Energy harvesting (1)
- Environment (1)
- Epitaxial thin films (1)
- Etalon feature (1)
- Evaporative drying (1)
- Ex-situ X-ray computed tomography (1)
- FAIR research data management (1)
- FFF-3D printer (1)
- FMEA (1)
- Fachausschuss (1)
- Far-infrared spectroscopy (1)
- Fatigue (1)
- Feedstock powder (1)
- Ferroic cooling (1)
- Fiber orientation (1)
- Film noise (1)
- Film system classification (1)
- Fire spalling (1)
- Flash excitation (1)
- Flash lamp (1)
- Flat bottom holes (1)
- Flaw detection (1)
- Flying line thermography (1)
- Frost salt attack (1)
- General Chemical Engineering (1)
- General Chemistry (1)
- General Materials Science (1)
- General energy (1)
- Geosciences (1)
- Ground Penetrating Radar (1)
- Ground penetrating radar (1)
- Hackathon (1)
- Half-Cell Potential Mapping (1)
- Heat diffusion (1)
- Heat transfer (1)
- Heterogeneous (1)
- Heusler alloys (1)
- High temperature (1)
- Hot disc method (1)
- Human Factors (1)
- Human error (1)
- Human factors (1)
- IR-Spektroskopie (1)
- IR-spectroscopy (1)
- Image Quality (1)
- Image evaluation (1)
- Image processing (1)
- Image reconstruction (1)
- Image registration (1)
- Impact (1)
- Impact behaviour (1)
- In Memoriam (1)
- In situ studies (1)
- In-process monitoring (1)
- In-situ (1)
- In-situ Process Monitoring (1)
- In-situ process monitoring (1)
- Indoor air quality (1)
- Induced polarization (1)
- Industrial and Manufacturing Engineering (1)
- Industry 4.0 (1)
- Interlayer delay (1)
- Interoperability (1)
- Inverse Design (1)
- Inverse Problem (1)
- Inverse design techniques (1)
- Inverse problems (1)
- Iterative shrinkage thresholding (1)
- Klassifizierung (1)
- Knowledge graphs (1)
- Korrosion (1)
- L-PBF (1)
- LMD (1)
- LPBF (1)
- La(Fe,Si)13 phase (1)
- Lack-of-fusion (1)
- Laminates (1)
- Large Language model (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser beam melting (LBM) (1)
- Laser excitation (1)
- Laser heating (1)
- Laser metal deposition (1)
- Laser powder bed fusion (1)
- Laser powder bed fusion (PBF-LB/M, L-PBF) (1)
- Laser scanning (1)
- Laser-Pulver-Auftragschweißen (1)
- Linked open data (1)
- Lithium-ion battery (1)
- Lock-in (1)
- Lock-in excitation (1)
- Lock-in thermography (1)
- MWIR (1)
- Machine learning optimization (1)
- Magnetic materials (1)
- Magneto-structural transition (1)
- Magnetocaloric materials (1)
- Maschinelles Lernen (1)
- Mass Spectrometry (1)
- Material Moisture (1)
- Material cassification (1)
- Materials by design (1)
- Materials evaluation (1)
- Materials science (1)
- Mechanochemistry (1)
- Melt pool depth (1)
- Melt-extraction technique (1)
- Mensch-Maschine-Interaktion (1)
- Mercury intrusion porosimetry (1)
- Metal (1)
- Metallic glasses (1)
- Microstructure (1)
- Mid-IR absorption (1)
- Modeling (1)
- Modular Production (1)
- Modulation transfer function (1)
- Moisture transport (1)
- Multi-dimensional reconstruction (1)
- Multidisciplinary (1)
- Multilaysers (1)
- NIR (1)
- NMR (1)
- Nanoindentation (1)
- Natural stones (1)
- Neutron Diffraction (1)
- Neutron Imaging (1)
- Nitinol (1)
- Noise simulation (1)
- Non Destructive Testing (1)
- Non-destructive Materials (1)
- Nondestructive testing (1)
- Nondestructive testing (NDT) (1)
- Normung (1)
- Notches (1)
- Nuclear Magnetic Resonance Spectroscopy (1)
- Numeric simulation (1)
- Numerical modelling (1)
- Obituary (1)
- Online NMR spectroscopy (1)
- Online Process Monitoring (1)
- Online monitoring (1)
- Onsite inspection (1)
- Ontologies (1)
- Ontology (1)
- Ontology Engineering (1)
- Opaque materials (1)
- Operational characteristics (1)
- Optical Tomography (1)
- Optimization (1)
- Orchestration (1)
- Parker method (1)
- Peritectic reaction (1)
- Photoacoustic characterization (1)
- Photon Counting Detectors (1)
- Photon counting detector (1)
- Photothermal Technique (1)
- Photothermal imaging (1)
- Photothermal super resolution (1)
- Photothermisch (1)
- Physical and theoretical chemistry (1)
- Pitting corrosion (1)
- Planar tomography (1)
- Polymers (1)
- Pore size distribution (1)
- Pore space characterization (1)
- Porosity (1)
- Porosity prediction (1)
- Porous materials (1)
- Potential mapping (1)
- Ppreheating temperature (1)
- Prediction (1)
- Probability of detection (1)
- Process Monitoring (1)
- Process development (1)
- Process industry (1)
- Pulse energy (1)
- Pulse thermography (1)
- Pulsed magnetic field (1)
- Radar (1)
- Raman spectroscopy (1)
- Real-time process monitoring (1)
- Reconstruction algorithms (1)
- Recycling (1)
- Reflectivity (1)
- Regenerator (1)
- Regularization (1)
- Reinforced Concrete (1)
- Reinforced concrete structure (1)
- Relaxation times (1)
- Representative specimens (1)
- Reproducibility (1)
- Risk assessment (1)
- Röntgen-Refraktion (1)
- SCF (1)
- SEM micrography (1)
- SWIR (1)
- SWIR thermography (1)
- Safety (1)
- Sandstones (1)
- Saturation (1)
- Scattered radiation (1)
- Schadensanalyse (1)
- Schichtdickenbestimmung (1)
- Schichtdickenmessung (1)
- Schnittstellen (1)
- Scientific software (1)
- Selective laser beam melting (1)
- Selective laser melting (1)
- Semantic web (1)
- Semi-transparent composite (1)
- Semitransparency (1)
- Sensitivity (1)
- Shape memory alloy (1)
- Shear-band cavitation (1)
- Short-distance diffusion (1)
- Signal Features (1)
- Signal features (1)
- Single-sided NMR (1)
- Solid state cooling (1)
- Spectroscopy (1)
- Spot-welded joints (1)
- Stainless Steel (1)
- Stainless steel (1)
- Standardisation (1)
- Standards (1)
- Steel fiber reiniforced concrete (1)
- Stoichiometric phases (1)
- Stress Coupling (1)
- Structured heating (1)
- Structured light scanning (SLS) (1)
- Subsurface defects (1)
- Super Resolution (1)
- Super resolution (SR) (1)
- Super-resolution imaging (1)
- Supplementary cementitous materials (1)
- Surface cracks (1)
- Surface defects (1)
- Surface relaxivities (1)
- Surface relaxivity (1)
- Surfaces, coatings and films (1)
- Sustainable building materials (1)
- Sustainable concrete (1)
- Synchrotron X-ray computed tomography (1)
- TRISO (1)
- Tape casting (1)
- Thermal analysis (1)
- Thermal diffusivity (1)
- Thermal effusivity (1)
- Thermal emission (1)
- Thermal history (1)
- Thermal percolation threshold (1)
- Thermal testing (1)
- Thermal waves (1)
- Thermocouple (1)
- Thin film characterization (1)
- Three-dimensional measurement (1)
- Tomography of wood samples (1)
- Total transmittance reflectance (1)
- Two-photon polymerization (1)
- UV/VIS spectroscopy (1)
- Ultrafine particles (1)
- Ultrasound (1)
- VCSEL array (1)
- Validation (1)
- Virtual wave (1)
- Virtual wave concept (1)
- Virtual waves (1)
- Vocabulary providers (1)
- Waste heat conversion (1)
- Wavelet transformation (1)
- Wide angle reflection and refraction (1)
- Wind rotor blade (1)
- Wind turbine rotor blades (1)
- Windenergie Anlage Rotorblätter (1)
- Wire are additive manufacturing (1)
- X-Ray refraction (1)
- X-ray (1)
- X-ray Diffraction (1)
- X-ray and Neutron Diffraction (1)
- X-ray computed tomography (XCT) (1)
- X-ray diffraction (1)
- X-ray microscopy (1)
- X-ray tomographic (1)
- XCT (1)
- ZfP (1)
- ZfP 4.0 (1)
- Zuverlässigkeit (1)
- infrared Thermography (1)
- materials informatics (1)
- microstructural changes (1)
- standardization (1)
Organisationseinheit der BAM
- 8.0 Abteilungsleitung und andere (121) (entfernen)
Paper des Monats
- ja (5)
In this work, we present a novel approach to photothermal super resolution based thermographic resolution of internal defects using two-dimensional pixel pattern-based active photothermal laser heating in conjunction with subsequent numerical reconstruction to achieve a high-resolution reconstruction of internal defect structures. With the proposed adoption of pixelated patterns generated using laser coupled high-power DLP projector technology the complexity for achieving true two-dimensional super resolution can be dramatically reduced taking a crucial step forward towards widespread practical viability. Furthermore, based on the latest developments in high-power DLP projectors, we present their first application for structured pulsed thermographic inspection of macroscopic metal samples. In addition, a forward solution to the underlying inverse problem is proposed along with an appropriate heuristic to find the regularization parameters necessary for the numerical inversion in a laboratory setting. This allows the generation of synthetic measurement data, opening the door for the application of machine learning based methods for future improvements towards full automation of the method. Finally, the proposed method is experimentally validated and shown to outperform several established conventional thermographic testing techniques while conservatively improving the required measurement times by a factor of 8 compared to currently available photothermal super resolution techniques.
Recently, the photothermal determination of the thermophysical properties of concrete under lab conditions was reported. Their values are mainly needed to look at the energy consumption of buildings. Additionally, changes in their values in relation to the initial state might also be a good indicator for material quality or for moisture. The present contribution explains the photothermal method in a more general way to indicate the potential for on-site application. Secondly, a special application case is regarded: the detection of moisture in concrete. Two concrete samples were soaked with water, followed by a drying period, to obtain different levels of water penetration. The water contents were determined by weighing, and the photothermal response was measured. The results show a large influence on the measured temperature transients, which is larger than expected from the original simple model. They clearly provide two points: the photothermal method is suited to detect moisture in concrete, but the magnitude of the actual measurement effect is not yet understood.
Metallic glasses are known to have a remarkably robust yield strength, admitting Weibull moduli as high as for crystalline engineering alloys. However, their postyielding behavior is strongly varying, with large scatter in both flow stress levels and strains at failure. Using x-ray tomography, we reveal how a strain-dependent internal evolution of shear-band cavities underlies this unpredictable postyielding response.We demonstrate how macroscopic strain softening coincides with the first detection of internal shear-band cavitation. Cavity growth during plastic flow is found to follow a power law, which yields a fractal dimension and a roughness exponent in excellent agreement with self-similar surface properties obtained after fracture. These findings demonstrate how internal microcracking coexists with shear-band plasticity along the plastic part of a stress-strain curve, rationalizing the large variability of plastic flow behavior seen for metallic glasses.
Because of its mobility and ability to investigate exposed surfaces, single-sided (SiS) nuclear magnetic resonance (NMR) technology enables new application fields in geosciences. To test and assess its corresponding potential, we compare longitudinal (T1) and transverse (T2) data measured by SiS NMR with those of conventional geoscientific laboratory NMR. We use reference sandstone samples covering a broad range of pore sizes. Our study demonstrates that the lower signal-to-noise ratio of SiS NMR data generally tends to slightly overestimated widths of relaxation time distributions and consequently pore size distributions. While SiS and conventional NMR produce very similar T1 relaxation data, unbiased SiS NMR results for T2 measurements can only be expected for fine material, i.e. clayey or silty sediments and soils with main relaxation times below 0.05s. This limit is given by the diffusion relaxation rate due to the gradient in the primary magnetic field associated with the SiS NMR. Above that limit, i.e. for coarse material, the relaxation data is strongly attenuated. If considering the diffusion relaxation time of 0.2 s in the numerical data inversion process, the information content >0.2s is blurred over a range larger than that of conventional NMR. However, our results show that principle range and magnitudes of the relaxation time distributions are reconstructed to some extent. Regarding these findings, SiS NMR can be helpful to solve geoscientific issues, e.g. to assess the hydro-mechanical properties of the walls of underground facilities or to provide local soil moisture data sets for calibrating indirect remote techniques on the regional scale. The greatest opportunity provided by the SiS NMR technology is the acquisition of profile relaxation data for rocks with significant bedding structures at the µm scale. With this unique feature, SiS NMR can support the understanding and modeling of hydraulic and diffusional anisotropy behavior of sedimentary rocks.
Direct Laser Writing (DLW) and X-ray computed tomography (XCT) both offer unique possibilities in their respective fields. DLW produces full three-dimensional (3D) polymer structures on the microscale with resolutions below 100 nm. The fabricated structures can be analysed by XCT or X-ray microscopy (XRM), which incorporates additional X-ray lenses, in three dimensions down to a minimal basic spatial resolution of about 500 nm or 50 nm, respectively. In this work, two different DLW structures are analysed via XCT. Internal defects are detected and analysed for the purpose of quality control. Defects and structures with sizes down to 1.5 µm are successfully analysed. A 3D reconstruction and internal, hidden features of the fabricated structures are shown and discussed. In a first-of-its-kind study, we demonstrate the detectability of a single-voxel line inside a fabricated structure that would not be detectable with SEM or light microscopy. Furthermore, the direct fabrication on a PET substrate is shown to overcome the high X-ray absorbance of commonly used glass substrates. Attenuation spectra of SZ2080 and glass substrates are compared to a fabrication route direct on a 170 µm PET foil. The practical aspects of XCT measurements for DLW structures on different substrates will be discussed.
In-situ monitoring of the Laser Powder Bed Fusion build process via bi- chromatic optical tomography
(2022)
As metal additive manufacturing (AM) is entering industrial serial production of safety relevant components, the need for reliable process qualification is growing continuously. Especially in strictly regulated industries, such as aviation, the use of AM is strongly dependent on ensuring consistent quality of components. Because of its numerous influencing factors, up to now, the metal AM process is not fully controllable. Today, expensive part qualification processes for each single component are common in industry.
This contribution focusses on bi-chromatic optical tomography as a new approach for AM in-situ quality control. In contrast to classical optical tomography, the emitted process radiation is monitored simultaneously with two temperature calibrated cameras at two separate wavelength bands. This approach allows one to estimate the local maximum temperatures during the manufacturing process, thus increases the comparability of monitoring data of different processes. A new process information level at low investment cost is reachable, compared to, e.g., infrared thermography.
Shape memory alloy structures for actuator and vibration damper applications may be manufactured using wire arc additive manufacturing (W AAM), which is one of the additive manufacturing technologies. Multilayer deposition causes heat accumulation during W AAM, which rises the preheat temperature of the previously created layer. This leads to process instabilities, which result in deviations from the desired dimensions and mechanical properties changes. During W AAM deposition of the wall structure, a systematic research is carried out by adjusting the interlayer delay from 10 to 30 s. When the delay period is increased from 10 to 30 s, the breadth decreases by 45% and the height increases by 33%. Grain refinement occurs when the interlayer delay duration is increased, resulting in better hardness, phase transformation temperature, compressive strength, and shape recovery behavior. This study shows how the interlayer delay affects the behavior of W AAM-built nickel-titanium alloy (NiTi) structures in a variety of applications.
Learned block iterative shrinkage thresholding algorithm for photothermal super resolution imaging
(2022)
Block-sparse regularization is already well known in active thermal imaging and is used for multiple-measurement-based inverse problems. The main bottleneck of this method is the choice of regularization parameters which differs for each experiment. We show the benefits of using a learned block iterative shrinkage thresholding algorithm (LBISTA) that is able to learn the choice of regularization parameters, without the need to manually select them. In addition, LBISTA enables the determination of a suitable weight matrix to solve the underlying inverse problem. Therefore, in this paper we present LBISTA and compare it with state-of-the-art block iterative shrinkage thresholding using synthetically generated and experimental test data from active thermography for defect reconstruction. Our results show that the use of the learned block-sparse optimization approach provides smaller normalized mean square errors for a small fixed number of iterations. Thus, this allows us to improve the convergence speed and only needs a few iterations to generate accurate defect reconstruction in photothermal super-resolution imaging.
The detection of internal irregularities is crucial for quality assessment in metal-based additive manufacturing (AM) technologies such as laser powder bed fusion (L-PBF). The utilization of in-process thermography as an in situ monitoring tool in combination with post-process X-ray micro computed tomography (XCT) as a reference technique has shown great potential for this aim. Due to the small irregularity dimensions, a precise registration of the datasets is necessary as a
requirement for correlation. In this study, the registration of thermography and XCT reference datasets of a cylindric specimen containing keyhole pores is carried out for the development of a porosity prediction model. The considered datasets show variations in shape, data type and dimensionality, especially due to shrinkage and material elevation effects present in the manufactured part. Since the resulting deformations are challenging for registration, a novel preprocessing methodology is introduced that involves an adaptive volume adjustment algorithm which is based on the porosity distribution in the specimen. Thus, the implementation of a simple three-dimensional image-to-image registration is enabled. The results demonstrate the influence of the part deformation on the resulting porosity location and the importance of registration in terms of irregularity prediction.