Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (32) (entfernen)
Sprache
- Englisch (32)
Schlagworte
- Additive manufacturing (6)
- Residual stresses (6)
- Welding (6)
- Ultrasonic-assisted milling (5)
- Creep-resistant steel (4)
- Diffusible hydrogen (4)
- High-strength steel (4)
- Stress relief cracking (4)
- Surface integrity (4)
- Alloy 36 (3)
- Post weld heat treatment (3)
- Residual stress (3)
- Additive Manufacturing (2)
- Alloy modification (2)
- GMA welding (2)
- Gas metal arc welding (2)
- Heat control (2)
- High-strength structural steel (2)
- Hydrogen-assisted cracking (2)
- Implant test (2)
- In situ measurement (2)
- LIBS (2)
- Plasma-transferred arc welding (2)
- Solidification cracking (2)
- Submerged arc welding (2)
- WAAM (2)
- 2101 duplex stainless steel (1)
- 3D Scanning (1)
- AGIL (1)
- Austenitic stainless steels (1)
- Chemical composition (1)
- Co-Cr-alloy (1)
- Cobalt-chromium alloy (1)
- Cold cracking (1)
- Cold cracking safety (1)
- Component test (1)
- Component-like test (1)
- Computed tomography (1)
- Cutting forces (1)
- DED-arc (1)
- Diffraction-elastic constants (1)
- Digital image correlation (1)
- Duplex stainless steel (1)
- Evaporation (1)
- Fatigue Strength (1)
- Fractography (1)
- Fracture Mechanics (1)
- HAZ-softening (1)
- Heat-affected zone (1)
- High-strength filler metals (1)
- High-strength steel filler metal (1)
- High-strength steels (1)
- Hydrogen (1)
- Hydrogen diffusion (1)
- Hydrogen embrittlement (1)
- Hydrogen measurement (1)
- IBESS Approach (1)
- IN725 (1)
- LIBS TIG welding (1)
- LTT filler metal (1)
- Laser-based additive manufacturing (1)
- Local Weld Geometry (1)
- MVT (1)
- Machining (1)
- Mechanical Engineering (1)
- Mechanics of Materials (1)
- Metals and Alloys (1)
- Microalloying influences (1)
- Microcracking (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Microstructure (1)
- Minimum Waiting Time (1)
- Modification of structural morphology (1)
- Neutron diffraction (1)
- Ni alloy (1)
- Offshore (1)
- Offshore steel grade (1)
- Post-weld heat treatment (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Repair-welding (1)
- Residual Stress (1)
- Residual stress analysis (1)
- Stainless Steel (1)
- Stainless steel (1)
- Steel (1)
- Strain-free lattice spacing (1)
- Synchrotron radiation (1)
- TEKKEN (1)
- TIG welding (1)
- Thermodynamic simulation (1)
- Thick-walled (1)
- Varestraint test (1)
- Varestraint testing (1)
- Weld metal cracking (1)
- Welded Joints (1)
- Wind energy (1)
- X-ray and Neutron Diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray diffraction (1)
- X-ray refraction (1)
Organisationseinheit der BAM
- 9.4 Integrität von Schweißverbindungen (32) (entfernen)
Paper des Monats
- ja (5)
The avoidance of failures during the fabrication or operation of petrochemical reactors made of creep-resistant, low-alloy steels as 13CrMoV9-10 requires still research despite over 60 years of international investigations in the field of stress relief cracking. The quality of modern base materials and filler metals leads to the fact that previously known crack causes, such as impurities of S or P, recede into the background. Rather, the causes are increasingly to be found in the fabrication process. Investigations on the influence of heat control on the stresses in welded components and thus on the stress relief cracking sensitivity under realistic manufacturing conditions are not yet available. This work is subdivided in two parts. Part 1 of this study focused on the effect of heat control during submerged arc welding on the stresses. For this purpose, a testing facility was applied, which allows to observe the forces and moments accumulating during welding or heat treatment in a component-like specimen under shrinkage restraint. The stress acting in the specimen increases with higher preheat/interpass temperatures and higher heat input. During the heat treatment, the stresses are relieved. Nevertheless, cracks are formed already during heating. The total crack length correlates with the heat input.
The subject of this study is how, and to what extent, Varestraint/Transvarestraint test results are influenced by both testing parameters and characteristics of evaluation methods. Several different high-alloyed martensitic LTT (low Transformation temperature) filler materials, CrNi and CrMn type, were selected for examination due to their rather distinctive solidification cracking behaviour, which aroused interest after previous studies. First, the effects of different process parameter sets on the solidification cracking response were measured using standard approaches. Subsequently, microfocus X-ray computer tomography (μCT) scans were performed on the specimens. The results consistently show sub-surface cracking to significant yet varying extents. Different primary solidification types were found using wavelength dispersive X-ray (WDX) analysis conducted on filler metals with varying Cr/Ni equivalent ratios. This aspect is regarded as the main difference between the CrNiand CrMn-type materials in matters of cracking characteristics. Results show that when it comes to testing of modern highperformance alloys, one set of standard Varestraint testing parameters might not be equally suitable for all materials. Also, to properly accommodate different solidification types, sub-surface cracking has to be taken into account.