Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
Schlagworte
- Additive manufacturing (27)
- Computed tomography (12)
- Residual stress (11)
- X-ray computed tomography (10)
- Additive Manufacturing (8)
- Laser powder bed fusion (8)
- Simulation (7)
- Neutron diffraction (6)
- Neutron imaging (5)
- Residual Stress (5)
- Synchrotron X-ray diffraction (5)
- Ti-6Al-4V (5)
- Tomography (5)
- X-ray refraction (5)
- Computed Tomography (4)
- Microcracking (4)
- Röntgen-Refraktion (4)
- Thermography (4)
- Ultrasound (4)
- AISI 316L (3)
- Concrete (3)
- Creep (3)
- Laser Powder Bed Fusion (3)
- Micro-computed tomography (3)
- Microstructure (3)
- Neutron tomography (3)
- Phase distribution (3)
- Selective laser melting (SLM) (3)
- Texture (3)
- X-ray imaging (3)
- AGIL (2)
- Additive manufacturing (AM) (2)
- Ceramic matrix composites (2)
- Computertomografie (2)
- Computertomographie (2)
- Crack evolution (2)
- DIRECTT (2)
- Defect detection (2)
- Defects (2)
- Diffraction Enhanced Imaging (2)
- Digital image correlation (DIC) (2)
- Electron backscatter diffraction (2)
- Electron beam melting (2)
- Fiber orientation (2)
- Geometrical effect (2)
- Heat treatment (2)
- Inconel 718 (2)
- Infrared thermography (2)
- LPBF (2)
- Laser beam melting (2)
- Laser powder bed fusion (L-PBF) (2)
- Lattice structures (2)
- Materials Characterization (2)
- Micro-CT (2)
- Neutron Diffraction (2)
- Non-destructive Testing (2)
- Non-destructive testing (2)
- Porosity (2)
- Process atmosphere (2)
- Process monitoring (2)
- Radiography (2)
- Rectangular cross-section (2)
- Residual stress analysis (2)
- Sintering (2)
- Solid-state batteries (2)
- Synchrotron X-ray refraction radiography (2)
- Synchrotron radiation (2)
- Synthetic Training Data (2)
- TIG welding (2)
- Torsion (2)
- Verbundwerkstoffe (2)
- X-ray computed tomography (XCT) (2)
- XCT (2)
- dXCT (2)
- 2101 duplex stainless steel (1)
- 316L (1)
- 3D deep convolutional neural network (3D DCNN) (1)
- 3D microstructure (1)
- 3D printing (1)
- 4D tomographic data (1)
- ACEnet (1)
- ANFO (1)
- ASR-Sensitive Aggregate (1)
- Academic genealogy (1)
- Additive Fertigung (1)
- Additive Fertigung (AM) (1)
- Advanced manufacturing (1)
- AlSi10Mg alloy (1)
- Alkali-Silica Reaction (ASR) (1)
- Aluminium alloys (1)
- Analyzer-Based Imaging (1)
- Anisotropic fiber orientation (1)
- Anisotropy (1)
- Anosteocytic bone (1)
- Artificial Intelligence (1)
- As-built LPBF IN718 alloy (1)
- Asphalt (1)
- Augmented data (1)
- Automatic Segmentation (1)
- Automatic segmentation (1)
- BAM SynthCOND (1)
- BAM SynthMAT (1)
- Banana (1)
- Binder Jetting (1)
- Biodegradable implant (1)
- Biokunststoff (1)
- Biopolyol (1)
- Bone porosity (1)
- Bragg-edge (1)
- Brennfleck (1)
- CFK (1)
- CMAS - Calcium-Magnesium-Aluminiumsilikat (1)
- CT simulation (1)
- Calcium phosphate (1)
- Calcium phosphate bone cement (1)
- Carbon Fiber Reinforced Plastics (1)
- Cells (1)
- Cellular structures (1)
- Ceramics (1)
- Cleanliness (1)
- Coating (1)
- Components influence (1)
- Composite (1)
- Compression mechanical (1)
- Compression testing (1)
- Compressive strength (1)
- Compressive test (1)
- Computed tomography (CT) (1)
- Computer Tomographie (1)
- Computer Tomography (1)
- Contour scan strategy (1)
- Convolutional Neural Network (DCNN) (1)
- Convolutional neural networks (1)
- Convolutional neural networks (CNN) (1)
- Copper Deposition (1)
- Copper sulfide (1)
- Coputed tomography (1)
- Crack Detection (1)
- Crack propagation (1)
- Cracking (1)
- Cracks (1)
- Creep behavior (1)
- Crystal plasticity (1)
- Crystalline cones (1)
- Crystallography (1)
- Damage Quantification (1)
- Data fusion (1)
- Data processing (1)
- Debye-Waller-Faktor (1)
- Debye–Waller factor (1)
- Deep Convolutional Neural Network (DCNN) (1)
- Deep Discharge (1)
- Deep learning (1)
- Deep learning segmentation (1)
- Denoising Deblurring Sharpening (1)
- Deviatoric (1)
- Dice score (1)
- Diesel Particulate Filter Materials (1)
- Diffraction (1)
- Diffraction contrast neutron imaging (1)
- Diffraction elastic constants (1)
- Diffraction peak width (1)
- Diffraction-elastic constants (1)
- Diffusion (1)
- Digital volume correlation (1)
- Dimensional metrology (1)
- Dimensionelle Messung (1)
- Dislocations (1)
- Distortion (1)
- Distortion upon baseplate removal (1)
- Distribution of relaxation times analysis (1)
- Double-multilayer monochromators (1)
- Eddy Currents (1)
- Eddy-current testing (1)
- Effect of scanning strategies (1)
- Electro-fused zirconia (1)
- Energy-dispersive x-ray spectroscopy (1)
- European Metrology Networks (EMNs) (1)
- Explosives (1)
- FEM (1)
- FEM Simulation (1)
- Fatigue (1)
- Fatigue crack growth (1)
- Fatigue crack propagation (1)
- Fatigue damage (1)
- Festschrift (1)
- Fiber-reinforced concrete (1)
- Flaw detection (1)
- Fractals (1)
- Fracture (1)
- Friction braking (1)
- Fuel cell (1)
- Full-field phase tomography (1)
- Functionally graded porous structure (1)
- Gas evolution (1)
- Geometrical deviation (1)
- Geometrical magnification (1)
- Graphite induced hysteresis (1)
- Gyroid lattice (1)
- Helium (1)
- High entropy alloy (1)
- High-temperature ceramics (1)
- High-temperature polymer electrolyte membrane fuel cell (1)
- Homogenization schemes (1)
- Hot isostatic pressing (1)
- Hybrid manufacturing (1)
- Hydrogen embrittlement (1)
- Hystersis (1)
- INCONEL 718 (1)
- Image registration (1)
- Imaging (1)
- In situ monitoring (1)
- In situ tensile test (1)
- In-situ Druckversuch (1)
- In-situ compression (1)
- In-situ testing (1)
- Industrial CT (1)
- Inspection design and planning (1)
- Interfaces (1)
- Intergranular strain (1)
- Interphase residual stress (1)
- Inverse analysis (1)
- Iterative method (1)
- Iterative reconstruction (1)
- Keramik (1)
- Kernel average misorientation (1)
- L-PBF (1)
- L-PBF IN718 material (1)
- Laboratory energy-dispersive X-ray diffraction (EDXRD) (1)
- Lack-of-fusion (1)
- Laminated metallic composites (1)
- Laminographie (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser beam melting (LBM) (1)
- Laser powder-bed fusion (1)
- Laser powderbed fusion (1)
- Laser-based additive manufacturing (1)
- Lattice structure (1)
- Li dendrites (1)
- Li dendrites penetration mechanisms (1)
- Lightweight structures (1)
- Limited data (1)
- Lithium Ion Batteries (1)
- Lithium-ion battery (1)
- Litium Ion Cells (1)
- Low-cycle fatigue (1)
- Luftultraschall (1)
- L‐PBF (1)
- Machine learning (1)
- Machine learning segmentation (1)
- Macroscopic stress (1)
- Magnesium-gadolinium alloy (1)
- Magnetic Methods (1)
- Magnetic stray field (1)
- Magnéli phase (1)
- Maskinteknik (1)
- Mass transport (1)
- Material characterisation (1)
- Material science (1)
- Mechanical Engineering (1)
- Mechanical Properties (1)
- Mechanical anisotropy (1)
- Mechanicalproperties (1)
- Medical implants (1)
- Medium entropy alloy (1)
- Melt pool monitoring (1)
- Metal Matrix Composite (MMC) (1)
- Metal matrix composite (1)
- Metal matrix composite (MMC) (1)
- Metal matrix composites (1)
- Metallic matrix pad (1)
- Metamaterials (1)
- Metoligotoma (1)
- Metrology (1)
- Micromechanics (1)
- Microscopy (1)
- Mikro-Computertomographie (1)
- Minimally-invasive parapatellar approach (1)
- Missing wedge (1)
- Modified U-Net architectures (1)
- Multi-energy CT (1)
- Multi-phase materials (1)
- Multimodal analysis (1)
- Multiple-layered scaffold (1)
- Muon (1)
- Near-surface X-ray diffraction (1)
- Neutron Bragg edge imaging (1)
- Neutron and X-ray diffraction (1)
- Neutron instrument (1)
- Neutron scattering (1)
- Nneutron imaging (1)
- Non-Destructive Evaluation (1)
- Non-linear finite element modelling (1)
- Non-weldable superalloy (1)
- Nonlinear behavior (1)
- Nonlinear stress-strain curve (1)
- Numerische Simulation (1)
- Oil-based (1)
- Online Monitoring (1)
- Online Process Monitoring (1)
- Online monitoring (1)
- Open Circuit Voltage (1)
- Optical Tomography (1)
- Optical tomography (1)
- Optimization (1)
- Organic Solar Cell (1)
- Osseointegration (1)
- Osteochondral stifle joint defect (1)
- Oxygen reduction reaction (1)
- PBF-LB/M/316L (1)
- PBFLB/M AlSi10Mg alloy (1)
- PMMA (1)
- Parabolic flight (1)
- Phase transformation (1)
- Phylogeny (1)
- Physics (1)
- Pink beams (1)
- Platinum-free catalyst (1)
- Polyamid 12 (1)
- Polybutylensuccinat (PBS) (1)
- Polycaprolactone (1)
- Polymer (1)
- Polymer electrolyte membrane fuel cell (1)
- Polyneoptera (1)
- Pores (1)
- Porosität (1)
- Powder analysis (1)
- Powder bed fusion Laser beam (1)
- Powder metallurgy (1)
- Powder removal (1)
- Power law and power-law breakdown (1)
- Preferential orientation (1)
- Primary Battery (1)
- Principal stress components (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proteoglycans (1)
- Pseudo-Voigt fit function (1)
- Pure aluminium (1)
- Python (1)
- Quantitative moisture measurement (1)
- Quellfleckgröße (1)
- Radar (1)
- Rauschen (1)
- Re-entrant surface feature (1)
- Ready-to-use (1)
- Refraction (1)
- Refractory (1)
- Region of interest (1)
- Residual Stresses (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Resolution (1)
- Rissentwicklung (1)
- Room-temperature (1)
- Rotor blade (1)
- Rotorblatt (1)
- Roughness analysis (1)
- Röntgenrefraktion (1)
- Röntgenröhre (1)
- SWIR thermography (1)
- SXRR - Synchrotron X-ray Refraction Radiography (1)
- Scaffold (1)
- Scan strategy influence (1)
- Scanning electron microscopy (1)
- Scanning electron microscopy (SEM) (1)
- Schalenprüfstand (1)
- Schaum (1)
- Scintillator (1)
- Segmentations (1)
- Selective Laser Melting (1)
- Selective Laser Melting (SLM) (1)
- Selective laser melting (1)
- Self-organization (1)
- Semi-metallic brake-pad material (1)
- Sheep (1)
- Sheep animal model (1)
- Signal processing (1)
- Solid electrolytes (1)
- Solidification cracking (1)
- Spectral CT (1)
- Spectral induced polarization (1)
- SrTiO3 (1)
- Stainless Steel (1)
- Stakeholder (1)
- Steel fiber reinforced concrete (1)
- Steel fiber reiniforced concrete (1)
- Stiffness (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strategic Research Agenda (SRA), (1)
- Strength (1)
- Strengthening mechanisms (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress-relief heat-treatments (1)
- Structural science (1)
- Super martensitic stainless steel (1)
- Surface area (1)
- Surface preparation (1)
- Surface roughness (1)
- Surface roughness analysis (1)
- Synchrotron X-ray CT (1)
- Synchrotron X-ray diffraction (SXRD) (1)
- Synchrotron computed tomography (1)
- Synchrotron x-ray refraction radiography (SXRR) (1)
- Synchrotronstrahlung (1)
- TBC - Thermal barrier coatings (1)
- Temperature-dependent neutron transmission (1)
- Tensile strength (1)
- Tensile testing (1)
- Ternary (1)
- Thermal expansion (1)
- Thermal runaway (1)
- Thermoelectrics (1)
- Thermographie (1)
- Thermography Computed (1)
- Tiatanium (1)
- Time-lapse X-ray computed tomography (1)
- Toughening mechanisms (1)
- Trilobite compound eyes (1)
- Triple UNet (1)
- Triply Periodical Minimal Surface (1)
- Triply periodic minimal surface structures (1)
- Ultra-high performance concrete (1)
- Ultrasonic testing (1)
- Uncertainty estimation (1)
- Virtual CT (1)
- Voltage Loss (1)
- Voxel size (1)
- WAAM (1)
- Water permeability (1)
- Water transport (1)
- Water-based (1)
- Wind turbine (1)
- Windkraft (1)
- X-ray (1)
- X-ray CT (1)
- X-ray Computed Tomography (1)
- X-ray Computed Tomography (CT) (1)
- X-ray Diffraction (1)
- X-ray and Neutron Diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (CT) (1)
- X-ray laminography (1)
- X-ray microtomography (1)
- X-ray optics (1)
- X-ray refraction radiography (1)
- X-ray tomography (1)
- XCT Data Conditioning (1)
- Young’s modulus (1)
- Zahnstifte (1)
- Zirconium (1)
- aRTist (1)
- i.S.Sy.Da.T.A. (1)
- infrared Thermography (1)
- µ-gravity (1)
Organisationseinheit der BAM
- 8.5 Röntgenbildgebung (133) (entfernen)
Paper des Monats
- ja (1)
Time-dependent in situ measurement of atmospheric corrosion rates of duplex stainless steel wires
(2018)
Corrosion rates of strained grade UNS S32202 (2202) and UNS S32205 (2205) duplex stainless steel wires have been measured, in situ, using time-lapse X-ray computed tomography. Exposures to chloride-containing (MgCl2) atmospheric environments at 50 °C (12–15 M Cl− and pH ~5) with different mechanical elastic and elastic/plastic loads were carried out over a period of 21 months. The corrosion rates for grade 2202 increased over time, showing selective dissolution with shallow corrosion sites, coalescing along the surface of the wire. Corrosion rates of grade 2205 decreased over time, showing both selective and pitting corrosion with more localised attack, growing preferentially in depth. The nucleation of stress corrosion cracking was observed in both wires.
Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
(2022)
This study presents a thorough characterization of the creep properties of austenitic stainless steel 316L produced by laser powder bed fusion (LPBF 316L) contributing to the sparse available data to date. Experimental results (mechanical tests, microscopy, X-ray computed tomography) concerning the creep deformation and damage mechanisms are presented and discussed. The tested LPBF material exhibits a low defect population, which allows for the isolation and improved understanding of the effect of other typical aspects of an LPBF microstructure on the creep behavior. As a benchmark to assess the material properties of the LPBF 316L, a conventionally manufactured variant of 316L was also tested. To characterize the creep properties, hot tensile tests and constant force creep tests at 600 °C and 650 °C are performed. The creep stress exponents of the LPBF material are smaller than that of the conventional variant. The primary and secondary creep stages and the times to rupture of the LPBF material are shorter than the hot rolled 316L. Overall the creep damage is more extensive in the LPBF material. The creep damage of the LPBF material is overall mainly intergranular. It is presumably caused and accelerated by both the appearance of precipitates at the grain boundaries and the unfavorable orientation of the grain boundaries. Neither the melt pool boundaries nor entrapped gas pores show a significant influence on the creep damage mechanism.
As humanity contemplates manned missions to Mars, strategies need to be developed for the design and operation of hospitable environments to safely work in space for years. The supply of spare parts for repair and replacement of lost equipment will be one key need, but in-space manufacturing remains the only option for a timely supply. With high flexibility in design and the ability to manufacture ready-to-use components directly from a computeraided model, additive manufacturing (AM) technologies appear extremely attractive. For the manufacturing of metal parts, laser-beam melting is the most widely used AM process. However, the handling of metal powders in the absence of gravity is one prerequisite for its successful application in space. A gas flow throughout the powder bed is successfully applied to compensate for missing gravitational forces in microgravity experiments. This so-called gas-flow-assisted powder deposition is based on a porous Building platform acting as a filter for the fixation of metal particles in a gas flow driven by a pressure difference maintained by a vacuum pump.
In recent years, low-temperature polymer electrolyte fuel cells have become an increasingly important pillar in a zero-carbon strategy for curbing climate change, with their potential to power multiscale stationary and mobile applications. The performance improvement is a particular focus of research and engineering roadmaps, with water management being one of the major areas of interest for development. Appropriate characterisation tools for mapping the evolution, motion and removal of water are of high importance to tackle shortcomings.
This article demonstrates the development of a 4D high-speed neutron imaging technique, which enables a quantitative analysis of the local water evolution. 4D visualisation allows the time-resolved studies of droplet formation in the flow fields and water quantification in various cell parts. Performance parameters for water management are identified that offer a method of cell classification, which will, in turn, support computer modelling and the engineering of next-generation flow field designs.
The understanding of dynamic processes in Li-metal batteries is an important consideration to enable the full capacity of cells to be utilised. These processes, however, are generally not directly observable using X-ray techniques due to the low attenuation of Li; and are challenging to visualise using neutron imaging due to the low temporal resolution of the technique. In this work, complementary X-ray and neutron imaging are combined to track the dynamics of Li within a primary Li/SOCl2 cell. The temporal challenges posed by neutron imaging are overcome using the golden ratio imaging method which enables the identification of Li diffusion in operando. This combination of techniques has enabled an improved understanding of the processes which limit rate performance in Li/SOCl2 cells and may be applied beyond this chemistry to other Li-metal cells.
The ability to track electrode degradation, both spatially and temporally, is fundamental to understand performance loss during operation of lithium batteries. X-ray computed tomography can be used to follow structural and morphological changes in electrodes; however, the direct detection of electrochemical processes related to metallic lithium is difficult due to the low sensitivity to the element. In this work, 4-dimensional neutron computed tomography, which shows high contrast for lithium, is used to directly quantify the lithium diffusion process in spirally wound Li/SOCl2 primary cells. The neutron dataset enables the quantification of the lithium transport from the anode and the accumulation inside the SOCl2 cathode to be locally resolved. Complementarity between the collected neutron and X-ray computed tomographies is shown and by applying both methods in concert we have observed lithium diffusion blocking by the LiCl protection layer and identified all cell components which are difficult to distinguish using one of the methods alone.
Copper sulfide shows some unique physico-chemical properties that make it appealing as a cathode active material (CAM) for solid-state batteries (SSBs). The most peculiar feature of the electrode reaction is the reversible formation of μm-sized Cu crystals during cycling, despite its large theoretical volume change (75%). Here, the dynamic microstructural evolution of CuS cathodes in SSBs is studied using in situ synchrotron X-ray tomography. The formation of μm-sized Cu within the CAM particles can be clearly followed. This process is accompanied by crack formation that can be prevented by increasing the stack pressure from 26 to 40 MPa. Both the Cu inclusions and cracks show a preferential orientation perpendicular to the cell stack pressure, which can be a result of a z-oriented expansion of the CAM particles during lithiation. In addition, cycling leads to a z-oriented reversible displacement of the cathode
pellet, which is linked to the plating/stripping of the Li counter electrode. The pronounced structural changes cause pressure changes of up to 6 MPa within the cell, as determined by operando stack pressure measurements. Reasons for the reversibility of the electrode reaction are discussed and are attributed to the favorable combination of soft materials.
The safe fatigue design of metallic components fabricated by additive manufacturing (AM) is still a largely unsolved problem. This is primarily due to (a) a significant inhomogeneity of the material properties across the component; (b) defects such as porosity and lack of fusion as well as pronounced surface roughness of the asuilt components; and (c) residual stresses, which are very often present in the as‐built parts and need to be removed by post‐fabrication treatments. Such morphological and microstructural features are very different than in conventionally manufactured parts and play a much bigger role in determining the fatigue life. The above problems require specific solutions with respect to the identification of the critical (failure) sites in AM fabricated components. Moreover, the generation of representative test specimens characterized by similar temperature cycles needs to be guaranteed if one wants to reproducibly identify the critical sites and establish fatigue assessment methods taking into account the effect of defects on crack initiation and early propagation. The latter requires fracture mechanics‐based approaches which, unlike common methodologies, cover the specific characteristics of so‐called short fatigue cracks. This paper provides a discussion of all these aspects with special focus on components manufactured by laser powder bed fusion (L‐PBF). It shows how to adapt existing solutions, identifies fields where there are still gaps, and discusses proposals for potential improvement of the damage tolerance design of L‐PBF components
Li dendrites penetration through solid electrolytes (SEs) challenges the development of solid-state Li batteries (SSLBs). To date, significant efforts are devoted to understand the mechanistic dynamics of Li dendrites nucleation, growth, and propagation in SEs, and various strategies that aim to alleviate and even inhibit Li dendrite formation have been proposed. Nevertheless, most of these conventional strategies require either additional material processing steps or new materials/layers that eventually increase battery cost and complexity. In contrast, using external fields, such as mechanical force, temperature physical field, electric field, pulse current, and even magnetic field to regulate Li dendrites penetration through SEs, seems to be one of the most cost-effective strategies. This review focuses on the current research progress of utilizing external physical fields in regulating Li dendrites growth in SSLBs. For this purpose, the mechanical properties of Li and SEs, as well as the experimental results that visually track Li penetration dynamics, are reviewed. Finally, the review ends with remaining open questions in future studies of Li dendrites growth and penetration in SEs. It is hoped this review can shed some light on understanding the complex Li dendrite issues in SSLBs and potentially guide their rational design for further development.
To assess the clinical course of a sheep stifle joint model for osteochondral (OC) defects, medial femoral condyles (MFC) were exposed without patella luxation using medial parapatellar skin (3–4 cm) and deep incisions (2–3 cm). Two defects (7 mm diameter; 10 mm depth; OC punch) were left empty or refilled with osteochondral autologous transplantation cylinders (OATS) and explanted after six weeks. Incision-to-suture time, anesthesia time, and postoperative wound or impairment scores were compared to those in sham-operated animals. Implant performance was assessed by X-ray, micro-computed tomography, histology, and immunohistology (collagens 1, 2; aggrecan). There were no surgery-related infections or patellar luxations. Operation, anesthesia, and time to complete stand were short (0.5, 1.4, and 1.5 h, respectively). The wound trauma score was low (0.4 of maximally 4; day 7). Empty-defect and OATS animals reached an impairment score of 0 significantly later than sham animals (7.4 and 4.0 days, respectively, versus 1.5 days). Empty defects showed incomplete healing and dedifferentiation/heterotopic differentiation; OATS-filled defects displayed advanced bone healing with remaining cartilage gaps and orthotopic expression of bone and cartilage markers. Minimally-invasive, medial parapatellar surgery of OC defects on the sheep MFC allows rapid and low-trauma recovery and appears well-suited for implant testing.