Wissenschaftliche Artikel der BAM
Filtern
Erscheinungsjahr
- 2020 (288) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (288) (entfernen)
Schlagworte
- Fluorescence (10)
- Additive manufacturing (9)
- MALDI-TOF MS (8)
- Laser-induced periodic surface structures (LIPSS) (7)
- Lifetime (7)
- Nanoparticles (7)
- SAXS (7)
- Additive Manufacturing (6)
- Mechanical properties (6)
- Polylactide (6)
- Quantum yield (6)
- Thermography (6)
- EBSD (5)
- Electrochemistry (5)
- Laser beam welding (5)
- Magnetic resonance imaging (5)
- Nanoparticle (5)
- Photoluminescence (5)
- Residual stress (5)
- Sensor (5)
- Tribology (5)
- Cancer (4)
- Dye (4)
- Multiplexing (4)
- NIR (4)
- Photophysics (4)
- Raman spectroscopy (4)
- XPS (4)
- AFM (3)
- Bottom ash (3)
- Computed tomography (3)
- Concrete (3)
- Corrosion (3)
- Gadolinium (3)
- ICP-MS (3)
- Lanthanide (3)
- Laser ablation (3)
- Machine learning (3)
- Mass spectrometry (3)
- Microbiologically influenced corrosion (3)
- Microscopy (3)
- Nano (3)
- Numerical simulation (3)
- Particle (3)
- Porosity (3)
- Process Industry (3)
- Process monitoring (3)
- Quality assurance (3)
- Quantification (3)
- Surface chemistry (3)
- Surface functionalization (3)
- Synthesis (3)
- TEM (3)
- Termites (3)
- Texture (3)
- Traceability (3)
- Ultrasound (3)
- Wear (3)
- Welding (3)
- X-ray photoelectron spectroscopy (3)
- Absolute isotope ratio (2)
- Alkali-activated materials (2)
- Aluminium (2)
- Artificial neural networks (2)
- Atherosclerosis (2)
- Atomic force microscopy (2)
- Bead (2)
- Biosensing (2)
- Black fungi (2)
- Calibration (2)
- Carbon steel (2)
- Catalysis (2)
- Coating (2)
- Cracks (2)
- Creep-resistant steel (2)
- Crystal (2)
- Cyclization (2)
- Data processing (2)
- Deep learning (2)
- Degradation (2)
- Diffusible hydrogen (2)
- Digestion (2)
- Digitalisation (2)
- Distributed fiber optic sensing (2)
- Ectoine (2)
- Electron backscatter diffraction (2)
- Fatigue (2)
- Femtosecond laser processing (2)
- Flame retardant (2)
- Flow cytometry (2)
- Fluorides (2)
- Forsterite (2)
- Gadofosveset (2)
- Giant magnetoresistance (2)
- Graphene oxide (2)
- Halomonas elongata (2)
- High-strength steel (2)
- Hot cracking (2)
- Hot stamping (2)
- Hybridoma (2)
- Hydrogen (2)
- Imaging (2)
- Implant test (2)
- Industry 4.0 (2)
- Infrared thermography (2)
- Iron (2)
- Iron oxide (2)
- LA-ICP-MS (2)
- LPBF (2)
- Lab-on-a-chip (2)
- Lanthanides (2)
- Laser powder bed fusion (2)
- Laser powder bed fusion (L-PBF) (2)
- Laser-induced oxide layer (2)
- Leaching (2)
- Leaching control mechanisms (2)
- Lithium-ion battery (2)
- Luminescence (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Method (2)
- Microplastic (2)
- Microstructure (2)
- Modeling (2)
- Niobium (2)
- Numerical modelling (2)
- Orientation precision (2)
- Oxygen evolution reaction (2)
- Phase transformation (2)
- Phosphorus fertilizer (2)
- Polymers (2)
- Post weld heat treatment (2)
- Quasicrystal (2)
- ROPPOC (2)
- Radiation protection (2)
- Reference material (2)
- SEM (2)
- SWIR (2)
- Scattering (2)
- Selective laser melting (SLM) (2)
- Simulation (2)
- Small-angle X-ray scattering (2)
- Solidification cracking (2)
- Spectroscopy (2)
- Stability (2)
- Stress relief cracking (2)
- Structural health monitoring (2)
- Surface modification (2)
- Synchrotron X-ray diffraction (2)
- TED-GC/MS (2)
- Ti-6Al-4V (2)
- Tomography (2)
- Triple isotope fractionation (2)
- Upconversion (2)
- Wood Protection (2)
- X-ray diffraction (2)
- XANES (2)
- (Quantitative) Structure-Active Relationships (1)
- 266nm (1)
- 2D chromatography (1)
- 2PP (1)
- 316L (1)
- 3D printing (1)
- 3D-printing (1)
- AIE (1)
- AIS (1)
- AISI 304L (1)
- AISI 316L (1)
- ANFO (1)
- ASR-Sensitive Aggregate (1)
- ATZ (1)
- Aautomatisation (1)
- Abasic site (1)
- Absorption (1)
- Abwasser (1)
- Academic genealogy (1)
- Acetylation (1)
- Acidobacteria (1)
- Acoustic emission analysis (1)
- Acoustic sensing (1)
- Acrylamide (1)
- Adaptation (1)
- Adaptive importance sampling (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (AM) (1)
- Adoption (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Adsorption (1)
- Aerosol (1)
- Aerosolsensor (1)
- Ag (1)
- Agarose gel electrophorese (1)
- Aggregation (1)
- Aggregation-induced emission (1)
- Aggressive environments (1)
- Aging (1)
- Agricultural by-product (1)
- Air-coupled transducers (1)
- Air-coupled ultrasound (1)
- Airport (1)
- Aktivkohle (1)
- Alkali aggregate reaction (1)
- Alkali aluminosilicate glasses (1)
- Alkali silica reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-silica reaction (1)
- Alkaline earth metal coordination polymers (1)
- Alpha-tricalcium phosphate (1)
- Alumina (1)
- Alumina toughened zirconia (1)
- Aluminum diethylphosphinate (1)
- Aluminum hydroxide (ATH) (1)
- Amplification (1)
- Amyloid (1)
- Analysis (1)
- Analytical Chemistry (1)
- Analytical methods (1)
- Analytical model (1)
- Angiography (1)
- Angle measurement (1)
- Anhydrite (1)
- Anodization (1)
- Anthropocene (1)
- Antibody (1)
- Antibody-gated indicator delivery (1)
- Antikörper (1)
- Antimicrobial coating (1)
- Antimicrobial resistance (1)
- Antimony (1)
- Applications (1)
- Approximant (1)
- Aqueous quantum dot (1)
- Archaeometry (1)
- Arrhenius (1)
- Artificial ageing (1)
- Artificial neural network (1)
- Artificial neural network modelling (1)
- Artificial weathering (1)
- Assay (1)
- Au (1)
- Austenitic stainless steels (1)
- Automated analysis (1)
- Automated manufacturing (1)
- Automated operational modal analysis (1)
- Automation (1)
- Aviation (1)
- Aza-BODIPY (1)
- BAMline (1)
- BPA removal (1)
- Bacillus subtilis (1)
- Back-side integration (1)
- Backlight (1)
- Bacteria (1)
- Bacterial attachment (1)
- Bacterial cell cycle (1)
- Bacterial second messenger (1)
- Barcoding (1)
- Bassanite (1)
- Batch tests (1)
- Bead-based assay (1)
- Bending modulus (1)
- Beneficial microbes (1)
- Benzothiadiazole (1)
- Bimetallic noble metal nanoparticles (1)
- Binder Jetting (1)
- Bio-weathering (1)
- Bioceramics (1)
- Biocides (1)
- Biocorrosion (1)
- Biodeterioration (1)
- Biofilm (1)
- Biofilms (1)
- Bioinformatics (1)
- Biosensors (1)
- Biphasic growth (1)
- Bismuth (1)
- Blends (1)
- Boehmite (1)
- Bombs (1)
- Boron compound (1)
- Brain (1)
- Bubble test (1)
- Building response (1)
- Bulge effect (1)
- Burning behavior (1)
- C-di-GMP (1)
- CCUS (1)
- CEA (1)
- CO2 pipeline transport (1)
- CONSENS (1)
- COST action CA15114 AMICI (1)
- CPD (1)
- CRISPR/Cas9 (1)
- CUINS2 nanocrystals (1)
- Cadmium (1)
- Calcite (1)
- Cannibalism (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Nanotubes (1)
- Carbon dioxide emissions (1)
- Carbon fiber-reinforced polymer (1)
- Carbon materials (1)
- Carbon nanotubes (1)
- Carbonation (1)
- Cardiovascular (1)
- Cell-repellent surfaces (1)
- Cells (1)
- Cellulose synthase (1)
- Cement (1)
- Cement paste (1)
- Ceramic nano particles (1)
- Certified reference material (1)
- Chance-risk analysis (1)
- Characterization (1)
- Charge density (1)
- Chemical composition (1)
- Chemical extraction (1)
- Chemical processes (1)
- Chicken manure ash (1)
- Chloride penetration (1)
- Chlorine (1)
- Chrystal orientation (1)
- Circular economy (1)
- Circumferential weld (1)
- Classification (1)
- Clustering (1)
- Coaggregation (1)
- Coatings (1)
- Cocoa (1)
- Cocrystal (1)
- Coda Wave Interferometry (1)
- Coda wave interferometry (1)
- Colloidal semiconductor nanocrystals (1)
- Combustion ion chromatography (CIC) (1)
- Comparability (1)
- Comparison (1)
- Compatible solute (1)
- Complementary methodology and metrology (1)
- Composite (1)
- Compressed sensing (1)
- Computed Tomography (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Comressed Sensing (1)
- Cone claorimeter (1)
- Confined catalyst (1)
- Consumer products (1)
- Contact resonance (1)
- Continuous Sensor (1)
- Contour scan strategy (1)
- Contrast agent (1)
- Controlled morphology (1)
- Convolutional neural networks (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Coptic (1)
- Coptotermes (1)
- Core microbiome (1)
- Core-shell (1)
- Corophium volutator (1)
- Corrosion resistance (1)
- Corrosion testing (1)
- Counterions (1)
- Cr(III) (1)
- CrCoNi (1)
- CrMnFeCoNi (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack evolution (1)
- Critical raw materials (1)
- Critical strain (1)
- Critical strain rate (1)
- Cryogenic steel (1)
- Crystal orientation (1)
- Crystallographic texture (1)
- Crystallography (1)
- Crystalstructure (1)
- Cyber-physical system (1)
- Cyclic (1)
- Cyclic Voltammetry (1)
- Cyclic loading (1)
- Cyclic weathering (1)
- DCB geometry (1)
- DFG SPP 2005 (1)
- DFT calculation (1)
- DFT calculations of Raman spectra (1)
- DIRECTT (1)
- DMDHEU (1)
- DNA (1)
- DNA base damage (1)
- DNA damage (1)
- DNA melting temperature (1)
- DNA origami (1)
- DNA protection (1)
- DNA radiation damage (1)
- DNA strand breaks (1)
- DNA strand-break (1)
- Damage (1)
- Damage Quantification (1)
- Damage detection (1)
- Damage-associated molecular patterns (DAMPs) (1)
- Dangerous goods packagings (1)
- Data Fusion (1)
- Data fusion (1)
- Decachlorotetrasilane (1)
- Decision tree (1)
- Deep penetration (1)
- Definition (1)
- Delamination (1)
- Delta scale (1)
- Dendritic polyglycerol (1)
- Densty-based Thermodynamics (1)
- Dental materials (1)
- Depletion force (1)
- Design of experiment (1)
- Deuterium (1)
- Deviatoric (1)
- Diagnostics (1)
- Dietary adaptation (1)
- Differential scanning calorimetry (1)
- Diffraction Enhanced Imaging (1)
- Diffraction elastic constants (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusivity (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital radiography (1)
- Digital transformation (1)
- Digital twins (1)
- Direct laser interference patterning (1)
- Direct laser interference patterning (DLIP) (1)
- Directed Energy Deposition (1)
- Dislocation density (1)
- Disorientation (1)
- Displacement (1)
- Dissimilar materials (1)
- Distortion upon baseplate removal (1)
- Distributed acoustic sensing (1)
- Distributed fiber sensing (1)
- Dothideomycetes (1)
- Double complex compound (1)
- Double notched creep specimen (1)
- Drag resistance (1)
- Driving style (1)
- Durability (1)
- Durability assessment (1)
- Dwell-time (1)
- Dye monomers (1)
- Dynamic Bayesian Network (1)
- EAF slags (1)
- EDS (1)
- ELISA (1)
- EPDM (1)
- ESMA (1)
- Ectoine DNA protection (1)
- Ectoine UV absorption (1)
- Ectoine hydration (1)
- Ectoine-DNA binding (1)
- Eddy current testing (1)
- Effect of scanning strategies (1)
- Efficacy (1)
- Egypt (1)
- Elastin-specific contrast agent ESMA (1)
- Elastin-specific molecular agent (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electrocatalysis (1)
- Electrochemical treatment (1)
- Electrolysis (1)
- Electromagnetic field (1)
- Electromagnetic theories (1)
- Electron beam melting (1)
- Electron microscopy (1)
- Electron probe microanalysis (1)
- Electronic skin (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Element transport (1)
- Elemental composition (1)
- Emission chamber (1)
- Emisssivity (1)
- Encapsulation (1)
- End crater (1)
- Energy efficiency (1)
- Engineering egress data (1)
- Enhancement (1)
- Entomopathogen (1)
- Entropy (1)
- Environment (1)
- Environmental assessment (1)
- Environmental pollutants (1)
- Environmental simulations (1)
- Environmental speciation (1)
- Erosion (1)
- Error sources analysis (1)
- Escherichia coli (1)
- Etofenprox (1)
- European funding strategies (1)
- Eurotiomycetes (1)
- Excitation forces (1)
- Excited states (1)
- Explosiven (1)
- Explosives (1)
- Explosives detection (1)
- Extracellular matrix (1)
- Extracellular polymeric substances (1)
- Extractable organically bound fluorine (EOF) (1)
- Extremophiles (1)
- F-N-diagram (1)
- FEM (1)
- FRET (1)
- FTIR (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- False-positive results (1)
- Fatigue tests (1)
- FeNi (1)
- Feedstock powder (1)
- Femtosecond laser ablation (1)
- Femtosecond laser-processing (1)
- Fermi resonance (1)
- Ferroelectret (1)
- Fertilizer (1)
- Ferumoxytol (1)
- Festschrift (1)
- Fiber optic (1)
- Fiber optic sensors (1)
- Fiber toxicology (1)
- Field of view (1)
- Filler wire (1)
- Finite Element Method (1)
- Flame retardants (1)
- Flexible PU foam (1)
- Flexible crystals (1)
- Flexural rigidity (1)
- Flow system (1)
- Fluorescence life time (1)
- Fluorescence standard (1)
- Fluorescent microscopy (1)
- Fluoride (1)
- Fluorine coordination (1)
- Food analysis (1)
- Force-distance curves (1)
- Formaldehyde (1)
- Formation enthalpy (1)
- Fourier transform spectroscopy (1)
- Fractography (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Friction (1)
- Fuel consumption (1)
- Fuel sorption (1)
- GDL (1)
- GFRP (1)
- GMA welding (1)
- GNBP-2 (1)
- GPS data (1)
- GPU Parallel computing (1)
- Gadolinium-based contrast agent (1)
- Gadovist (1)
- Galvanic anodes (1)
- Gas evolution (1)
- Gas flow assisted powder deposition (1)
- Gas sorption (1)
- Gated materials (1)
- Genomics (1)
- Gesteuerten Nanopartikeln (1)
- Geteilte Infrastruktur (1)
- Glass (1)
- Glass transition (1)
- Gnomonic projections (1)
- Gold (1)
- Grafting (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Granules (1)
- Graphen Oxide (1)
- Graphitization (1)
- Gravity response (1)
- Green light excitation (1)
- Grinding (1)
- Ground vibration (1)
- Growth-rate homeostasis (1)
- Gypsum (1)
- HF (1)
- HF free Digestion (1)
- HTS (1)
- Half-Cell Potential Mapping (1)
- Halophilic bacteria (1)
- Hardness (1)
- Hastelloy X (1)
- Hazard assessment (1)
- Healthcare (1)
- Heat Treatment (1)
- Heat capacity (1)
- Heat of combustion (1)
- Heat transfer (1)
- Heat-affected zone (1)
- Hemihydrate (1)
- Hepatocellular carcinoma (1)
- Heterodyning (1)
- Heterogeneity (1)
- Hexachlorodisilane (1)
- Hierarchical structures (1)
- High - temperature (1)
- High density polyethylene (1)
- High entropy alloys (1)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (1)
- High strength steels (1)
- High temperature corrosion (1)
- High temperature oxidation (1)
- High-Entropy Alloys (1)
- High-Speed (1)
- High-pressure (1)
- High-rise building (1)
- High-throughput (1)
- Holzschutzmittel (1)
- Horizontal wind turbine (1)
- Hot pressing (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Human behaviour (1)
- Human leukocyte antigen (HLA) (1)
- Hybrid Manufacturing (1)
- Hybrid composite pressure vessel (1)
- Hybrid laser-arc welding (1)
- Hybrid manufacturing (1)
- Hydrodynamic chromatography (HDC) (1)
- Hydrofluorination (1)
- Hydrogen evolution reaction (1)
- Hydrogen-assisted cracking (1)
- Hydrous glass (1)
- Hydroxyectoine (1)
- Hydroxyl radicals (1)
- Hygienic behavior (1)
- Hyperthermia (1)
- ICP-OES (1)
- INCONEL 718 (1)
- Identification (1)
- Image reconstruction (1)
- Immunoassay (1)
- Immunoassays (1)
- Imperceptible electronics (1)
- Implants (1)
- Impurities (1)
- In situ (1)
- In situ measurement (1)
- In situ tensile test (1)
- In-situ ED-XRD (1)
- In-situ polymerization (1)
- Inclination angle (1)
- Inconel 686 (1)
- Inconel 718 (1)
- Indentation fracture toughness (1)
- Individual cell tracking (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inductively coupled plasma mass spectroscopy (1)
- Inductively‑coupled mass spectrometry (1)
- Industrial leak testing (1)
- Inelastic background (1)
- Infections (1)
- Information security (1)
- Infrared spectroscopy (1)
- Inhibition (1)
- Ink (1)
- Insect biotechnology (1)
- Insecticide (1)
- Instumented indentation test (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter layer time (1)
- Interferometric spectroscopy (1)
- Interlaboratory test (1)
- Internal friction (1)
- Intrinsic OER activity (1)
- Inverse Problem (1)
- Ionic porosity (1)
- Ionization (1)
- Iposomes (1)
- Iron nanoparticles (1)
- Iron reducing bacteria (1)
- Iron scrap (1)
- Iterative real-time optimization (1)
- Iterative reconstruction (1)
- Jacobsen-Stockmayer theory (1)
- Joining technology (1)
- Joint sparsity (1)
- Keratin (1)
- Kernel average misorientation (1)
- Kikuchi diffraction (1)
- Kikuchi patterns (1)
- Kinetic study (1)
- Knock-out mutant (1)
- Kramers-Kronig detector (1)
- L-PBF IN718 material (1)
- LBM-DEM (1)
- LC-MS (1)
- LC-UV (1)
- LIBS (1)
- LIBS TIG welding (1)
- LMD (1)
- LTT filler metal (1)
- LTT weld filler materials (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Label (1)
- Laboratory 4.0 (1)
- Lack-of-fusion (1)
- Lanthanoide (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Thermography (1)
- Laser ablation-inductively coupled plasma-mass spectrometry (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser implantation (1)
- Laser metal deposition (1)
- Laser scanning (1)
- Laser thermography (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Laser-induced x-ray emission (1)
- Lateral dynamic displacement (1)
- Lateral flow assay (1)
- Lattice rotation (1)
- Lattice structures (1)
- Layer-by-layer deposition (1)
- Layered manganese oxide (1)
- Layered soil (1)
- Layerwise Slurry Deposition (1)
- Leaching tests (1)
- Lead ions (1)
- Leakproofness test (1)
- Leather (1)
- LiYF4 (1)
- Lifetime-encoded beads (1)
- Ligandsubstitution (1)
- Light harvesting (1)
- Limit of acceptable consequence (1)
- Limited data (1)
- Literature survey (1)
- Localized laser dispersing (1)
- Long term monitoring (1)
- Lorentz force (1)
- Low-energy electrons (1)
- Low-loading (1)
- Lubricants (1)
- Luftgüte (1)
- Lymnaea stagnalis (1)
- Lysimeter (1)
- MCC (1)
- MLCT (1)
- MR Angiography (1)
- MR imaging (1)
- MRI (1)
- MSWI bottom ash (1)
- MVT (1)
- MWIR (1)
- MYCN (1)
- Machine Learning (1)
- Macroscopic stress (1)
- Magnetic sensor system (1)
- Management system standards (1)
- Manuscripts (1)
- Mapping (1)
- Marine corrosion (1)
- Mass-Spectrometry (1)
- Materials database (1)
- Matter reorganization theories (1)
- Mechanical loading (1)
- Mechanochemical synthesis (1)
- Mechanosensitive channel (1)
- Medical implants (1)
- Medium entropy alloys (1)
- Melanin Adhesion (1)
- Melt pool depth (1)
- Melt pool monitoring (1)
- Mesoporous iridium oxide films (1)
- Mesoporous particles (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolomics (1)
- Metal (1)
- Metal fluorides (1)
- Metal matrix composite (1)
- Metal matrix composites (1)
- Metal recovery (1)
- Metal toxicity (1)
- Metal uptake (1)
- Metaproteomics (1)
- Metarhizium (1)
- Methane (1)
- Methanogen (1)
- Methanol oxidation (1)
- Micro-comuted tomography (µCT) (1)
- Microarray (1)
- Microbiological Corrosion (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Micromechanical modelling (1)
- Micromechanics (1)
- Microplastic-induced effects (1)
- Microplatic (1)
- Microstrucrue Design (1)
- Mineral identification (1)
- Mineral paragenesis (1)
- Miniaturization (1)
- Minimally-invasive parapatellar approach (1)
- Minimum burst pressure (1)
- Mixed conductors (1)
- Mixed ink (1)
- Mixture toxicity (1)
- Mn-oxides (1)
- Modelling (1)
- Modelling studies (1)
- Modifier adaptation (1)
- Molecular VOx catalysts (1)
- Molecular-MRI (1)
- Molecularly imprinted polymers (1)
- Monoclonal Antibody (1)
- Monopile support structure (1)
- Movement characteristics (1)
- MscS (1)
- Multiple-injection sample-standard bracketing (1)
- Multiplex (1)
- Multiport (1)
- Multivariate analyses (1)
- Mussel-inspired adhesives (1)
- NDT (1)
- NIR-I (1)
- NMR spectroscopy (1)
- NSE (1)
- Nano Particles (1)
- Nano-carrier (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- NanoCAM (1)
- Nanocomposite (1)
- Nanoinformatics (1)
- Nanomaterial (1)
- Nanomaterials (1)
- Nanoparticle characterization (1)
- Nanoparticle synthesis (1)
- Nanoplatform (1)
- Nanostructure (1)
- Nanostructures (1)
- Nanostructuring (1)
- Natural products discovery (1)
- Nb3Sn (1)
- Near-field spectroscopy (1)
- Near-surface X-ray diffraction (1)
- Neural network (1)
- Neural networks (1)
- Neutron Diffraction (1)
- Neutron diffraction (1)
- Neutron imaging (1)
- Nickel nanoparticles (1)
- Nneutron imaging (1)
- Non Destructive Testing (1)
- Non-destructive ambient analysis (1)
- Non-ferrous metals (1)
- Non-serrated inhomogeneous flow (1)
- Noncovalent interactions (1)
- Notch stress approach (1)
- Nuclear magnetic resonance (1)
- Numerical Simulation (1)
- Numerical investigation (1)
- Nutrient (1)
- OH scavenger (1)
- Octachlortrisilane (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- On-line CE/MC-ICP-MS (1)
- Online NMR Spectroscopy (1)
- Online NMR spectroscopy (1)
- Online Process Monitoring (1)
- Operando (1)
- Optical detection (1)
- Optical flow (1)
- Optical imaging (1)
- Optical tomography (1)
- Optically excited lock-in thermography (1)
- Ordered mesoporous carbon (1)
- Organic electronics (1)
- Organic-inorganic hybrid composites (1)
- Organophosphonate (1)
- Oscillating ball-on-disc test (1)
- Osmoadaptation (1)
- Osmotic shock (1)
- Osteochondral stifle joint defect (1)
- Oxyfuel (1)
- Oxygen Evolution Reaction (1)
- PBS (1)
- PET (1)
- PFAS (1)
- PIC technology (1)
- PQQ (1)
- PSA (1)
- Packaging (1)
- Particle architecture (1)
- Particle emissions (1)
- Particle size (1)
- Partikel (1)
- Passive RFID (1)
- Path planning (1)
- Pattern matching (1)
- Pattern recognition receptor (1)
- Pedestrian dynamics (1)
- Peptide (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Permeability (1)
- Permethrin (1)
- Phase transformations (1)
- Phenothrin (1)
- Phospholipids (1)
- Phosphorescence (1)
- Phosphorous flame retardant (1)
- Phosphorus (1)
- Photoelectrochemistry (1)
- Photoinduced electron transfer (1)
- Photonic biosensor (1)
- Photosensitization (1)
- Photothermal Technique (1)
- Physical twin (1)
- Physico-chemical characterisation of minerals (1)
- Physics (1)
- Piezoresistive cantilever (1)
- Plant availability (1)
- Plant-model mismatch (1)
- Plasmonic nanofocusing (1)
- Plastic deformation (1)
- Platinum group metals (1)
- Platinum-ruthenium colloid (1)
- Polarity (1)
- Pollen (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polycarbonate (1)
- Polychlorosilanes (1)
- Polyethylene (1)
- Polyethylene glycol (1)
- Polymer-based products (1)
- Polyolefins (1)
- Polyurethane (1)
- Polyvinyl formaldehyde foam (1)
- Pore space (1)
- Porous carbons (1)
- Position of carboxylate group (1)
- Potassium ions (1)
- Powder diffraction (1)
- Ppreheating temperature (1)
- Predictive modelling (1)
- Preferential exclusion (1)
- Preheating (1)
- Pressure-volume product (1)
- Primary Battery (1)
- Probability of failure (1)
- Process Analytical Technology (1)
- Process Control (1)
- Process analytical technology (1)
- Process industry (1)
- Process intelligence (1)
- Projection center (1)
- Proper Generalized Decomposition (1)
- Prostheses (1)
- Protein (1)
- Protein nitration (1)
- Protein oligomerization (1)
- Pseudo-translationalsublattices (1)
- Pt(111) (1)
- Pulsed magnetic field (1)
- Pulsed thermography (1)
- QUASES (1)
- Quality Control (1)
- Quantum dot (1)
- Quantum dots (1)
- Quartz (1)
- Quartzite rock (1)
- RNA interference (1)
- Radiation damage (1)
- Radical scavenger (1)
- Radiocarbon (1)
- Railway induced vibration (1)
- Raman (1)
- Raman microspectroscopy (1)
- Rare earth elements separations (1)
- Reactor conditions (1)
- Reactor control (1)
- Real-time process monitoring (1)
- Recombinant Antibody (1)
- Recyclable (1)
- Recycling (1)
- Redox (1)
- Redox switch (1)
- Reduced order models (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reference (1)
- Reference Materials (1)
- Reference standards (1)
- Refraction (1)
- Refractory alloys (1)
- Regulation (1)
- Reinforced Concrete (1)
- Reinforced concrete (1)
- Reliability (1)
- Remediation (1)
- Remote sensing vibrometer (1)
- Renal disease (1)
- Renewable copolymers (1)
- Repelling surface coatings (1)
- Reproducibility (1)
- Residual Stress (1)
- Residual stress in AM (1)
- Resins (1)
- Resonance (1)
- Resonance frequency (1)
- Resonance wavelength shift (1)
- Rheology (1)
- Rheometry (1)
- Rhodiumcomplexes (1)
- Rice husk ash (1)
- Ring resonator (1)
- Ring-opening Polymerisation (1)
- Ring-opening polymerization (1)
- River water sulfate (1)
- Road tankers (1)
- Rolling resistance (1)
- Room-temperature (1)
- Roughness (1)
- Rubber (1)
- Ruthenium(II) complexes (1)
- S-N curve (1)
- SBA-15 (1)
- SBA-16 (1)
- SEC (1)
- SHM (1)
- SHT (1)
- SIMS (1)
- SSB (1)
- SYBR gold (1)
- Safe-by-design (1)
- Salt (1)
- Scaffold (1)
- Scale anchor (1)
- Scanning electron microscopy (1)
- SchwarzP cells (1)
- Screening (1)
- Seawater (1)
- Secondary ion mass spectrometry (1)
- Secondary metabolites (1)
- Sediment (1)
- Segmentations (1)
- Selected area XPS (1)
- Selective Laser Melting (SLM) (1)
- Selective laser beam melting (1)
- Selective laser melting (1)
- Selective oxidation (1)
- Self-assembly (1)
- Self-organization (1)
- Semiconductor (1)
- Semiconductor quantum dot (1)
- Semitransparent (1)
- Sensitization (1)
- Sensors (1)
- Separation (1)
- Sequence dependence (1)
- Series production (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (1)
- Shape (1)
- Shared infrastruture (1)
- Sheep animal model (1)
- Shell (1)
- SiGe (1)
- Single cell microbiology (1)
- Single crystal Ni-Base superalloys (1)
- Single particle (1)
- Single particle ICP-MS (1)
- Single-pass welding (1)
- Single-source precursors (1)
- Size (1)
- Slag (1)
- Slow crack growth (1)
- Slurry (1)
- Small-area XPS (1)
- Small-spot XPS (1)
- Smart sensors (1)
- Smart structures (1)
- Smart test laboratories (1)
- Smarter Sensor (1)
- Social immunity (1)
- Social insects (1)
- Soda-lime silicate glass (1)
- Software (1)
- Soil (1)
- Soil contact (1)
- Sol-gel process (1)
- Solar cells (1)
- Solid state emission (1)
- Solubility (1)
- Solute excretion (1)
- Spatial heterodyne spectrometer (1)
- Specific probe (1)
- Spectral induced polarization (1)
- Spectrometer (1)
- Spectroscopic ellipsometry (1)
- Spray drying (1)
- Stable crack growth (1)
- Stainless Steel (1)
- Staircase method (1)
- Standards (1)
- Statistical analysis (1)
- Stored energy (1)
- Strain (1)
- Stranski–Krastanow growth (1)
- Stress conditions (1)
- Stress distribution (1)
- Stress intensity factor (1)
- Stress relaxation (1)
- Stress-strain behaviour (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural science (1)
- Structural sealant glazing (1)
- Structural stress approach (1)
- Subaerial biofilms (1)
- Sugar cane bagasse (1)
- Sulfate attack (1)
- Sulfur isotopes (1)
- Sunscreen (1)
- Super Resolution (1)
- Super resolution (1)
- Superconductivity (1)
- Superior sorbent (1)
- Supermartensitic steel (1)
- Supplementary cementitious material (1)
- Supported catalyst (1)
- Surface area (1)
- Surface charge (1)
- Surface chemical analysis (1)
- Surface chemisttry (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface roughness (1)
- Surface superconductivity (1)
- Surface waters (1)
- Surface-initated grafting (1)
- Sustainable Production (1)
- Switch (1)
- Symbiosis (1)
- Synchrotron (1)
- Synchrotron micro-tomography (1)
- TGA-FTIR (1)
- TGA-MS (1)
- TTS (1)
- Termite (1)
- Termite-associated microbes (1)
- Terrorism (1)
- Test setup (1)
- Testing procedure (1)
- Theranostic (1)
- Theranostics (1)
- Therapy (1)
- Thermal Process Engineering (1)
- Thermal analysis (1)
- Thermal decomposition (1)
- Thermal runaway (1)
- Thermal treatment (1)
- Thermoanalytik (1)
- Thermochemical treatment (1)
- Thermodynamics (1)
- Thermoelectric properties (1)
- Thick-walled steel (1)
- Thickness (1)
- Thin films (1)
- Thiourea-formaldehyde (1)
- Ti6Al4V alloys (1)
- TiO2 (1)
- Tiatanium (1)
- Tineola bisselliella (1)
- Titania nanoparticles (1)
- Titanium dioxide (1)
- ToF-SIMS (1)
- Touch surfaces (1)
- Track and vehicle irregularities (1)
- Train tracking (1)
- Transcriptomics (1)
- Transmission electron microscopy (TEM) (1)
- Transportation energy (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribologie (1)
- Triplet-triplet annihilation (1)
- Tubular X-joints (1)
- Tutzing Symposion (1)
- Two-photon polymerization (1)
- Type-I pyrethroids (1)
- UN Test O.2 (1)
- UV absorption (1)
- UV irradiation (1)
- UV photons (1)
- UV protection (1)
- UV-A (1)
- UV-B (1)
- UV-C (1)
- UV-Vis (1)
- UV-irradiation (1)
- Ultrasensitive (1)
- Ultrashort pulse laser processing (1)
- Ultrasonic imaging (1)
- Ultrasound gel (1)
- Umweltmessung (1)
- Umweltschadstoffe (1)
- Uncertainty (1)
- Upconversion nanoparticle (1)
- Utilisation (1)
- V-notch impact toughness (1)
- Validation (1)
- Value of information (1)
- Vanadium oxide catalysts (1)
- Varestraint test (1)
- Varestraint testing (1)
- Vibration sensing (1)
- Vickers indentation (1)
- Virtual wave concept (1)
- Visualization (1)
- Vitrimer (1)
- Volatile organic compounds (1)
- Volume changes (1)
- WAAM (1)
- Waste management (1)
- Waste treatment (1)
- Waste-to-energy (1)
- Water content (1)
- Water speciation (1)
- Water stability (1)
- Water treatment (1)
- Web mining (1)
- Weld fatigue (1)
- Welding thermal cycle (1)
- Werkstoffdatenbank (1)
- White light interferometry (1)
- Wood (1)
- Wood materials (1)
- Wood modification (1)
- Wood samples (1)
- X-ray Computed Tomography (CT) (1)
- X-ray Diffraction (1)
- X-ray Fluorescence (1)
- X-ray absorption spectroscopy (1)
- X-ray dark-field radiography (1)
- X-ray imaging (1)
- X-ray micro-computed tomography (1)
- X-ray refraction (1)
- X-ray refraction radiography (1)
- XANES spectroscopy (1)
- XAS (1)
- XCT (1)
- XRF (1)
- Yb(III) complex (1)
- Yield stress (1)
- Zinc phosphate (1)
- Zirconia (1)
- Zirconia-toughened alumina (1)
- Zwitterion (1)
- calibration (1)
- contact resonance (1)
- dye (1)
- hydrogen storage (1)
- magnetic nanocatalysts (1)
- photoluminescence (1)
- research landscape (1)
- underexplored phyla (1)
- µ-CT (1)
- μCT-analysis (1)
Organisationseinheit der BAM
- 6 Materialchemie (80)
- 1 Analytische Chemie; Referenzmaterialien (59)
- 8 Zerstörungsfreie Prüfung (47)
- 9 Komponentensicherheit (39)
- 4 Material und Umwelt (36)
- 5 Werkstofftechnik (31)
- 6.3 Strukturanalytik (29)
- 7 Bauwerkssicherheit (26)
- 6.1 Oberflächen- und Dünnschichtanalyse (20)
- 8.5 Röntgenbildgebung (19)
Paper des Monats
- ja (11)
In the present work a series of design rules are developed in order to tune the morphology of TiO2 nanoparticles through hydrothermal process. Through a careful experimental design, the influence of relevant process parameters on the synthesis outcome are studied, reaching to the develop predictive models by using Machine Learning methods. The models, after the validation and training, are able to predict with high accuracy the synthesis outcome in terms of nanoparticle size, polydispersity and aspect ratio. Furthermore, they are implemented by reverse engineering approach to do the inverse process, i.e. obtain the optimal synthesis parameters given a specific product characteristic. For the first time, it is presented a synthesis method that allows continuous and precise control of NPs morphology with the possibility to tune the aspect ratio over a large range from 1.4 (perfect truncated bipyramids) to 6 (elongated nanoparticles) and the length from 20 to 140 nm.
Modern air-liners and wind turbine rotor blades are made up primarily of fiber reinforced plastics. Failure of these materials heavily impairs the serviceability and the operational safety. Consequently, knowledge of the failure behavior under static and cyclic loads is of great interest to estimate the operational strength and to compare the performance of different materials. Ideally, the damage evolution under operational load is determined with in situ non-destructive testing techniques. Here, we report in-situ synchrotron X-ray imaging of tensile stress induced cracks in carbon fiber reinforced plastics due to inter-fiber failure. An inhouse designed compact tensile testing machine with a load range up to 15 kN was integrated into the beamline. Since conventional radiographs do not reveal sufficient contrast to distinguish cracks due to inter-fiber failure and micro cracking from fiber bundles, the Diffraction Enhanced Imaging (DEI) technique is applied in order to separate primary and scattered (refracted) radiation by means of an analyzer crystal. This technique allows fast measurements over large fields-of-view and is ideal for in-situ investigations. Imaging and the tensile test are run at the highest possible frame rate (0.7 s-1 ) and the lowest possible strain rate (5.5∙10-4 s -1 ). For 0°/90° non-crimp fabrics, the first inter-fiber cracks occur at 380 MPa (strain 0.8 %). Prior to failure at about 760 MPa (strain 2.0 %), we observe the evolution of nearly equidistant (1 mm distance) cracks running across the entire sample in the fully damaged state.
Raman spectroscopy provides vibrational fingerprints of chemical compounds enabling their unambiguous identification. The assignment of Raman spectra to minerals is straightforward, if appropriate reference data is accessible. Modern couplings of Raman spectroscopy with microscopy (Raman microspectroscopy) merge the high structural specificity with down to sub-micrometre spatial resolution. This analytical tool has high potential not only in the identification of minerals from natural sources but also for studying the complex microstructure and mineral distribution of both ancient and modern man-made materials. In addition to the chemical identity of minerals, Raman spectra are affected by crystal orientations (varying relative Raman band intensities); (sub)stoichiometric compositional changes (e.g., in solid solution series), traces of foreign ions, strain (the latter three shifting Raman bands); and crystallinity (changing Raman band widths), enabling a comprehensive physico-chemical characterisation of minerals. Thus, Raman spectroscopy – including its in situ measurement capabilities – provides possibilities to study mineral paragenesis in both, natural and man-made samples at the micrometre scale. While in 1928 the first experimental evidence for inelastic light scattering was provided by C. V. Raman and K. S. Krishnan by using sunlight for excitation, filters for selecting the inelastically scattered light, and their eyes for detection (later, photographic plates for acquisition of spectra were employed), modern Raman spectrometers make use of laser excitation, dispersive spectrographs and charge coupled device (CCD) detection. This Special Issue includes technological developments and applications in the field of modern Raman spectroscopy of minerals in a broad sense, from natural mineral deposits and archaeological objects to inorganic phases in man-made materials. The studied minerals include fossil resins, typical rock-forming minerals (calcite, quartz, forsterite), iron-sulphur species (e.g., mackinawite), a range of sulphates (gypsum, bassanite, anhydrite III, anhydrite II, celestine, barite, ternesite), as well as silicate minerals like garnets (e.g., almandine).
Low cost, high-efficiency catalysts towards water splitting are urgently required to fulfil the increasing demand for energy. In this work, low-loading (<20 wt%) Ni-confined in layered metal oxide anode catalysts (birnessite and lepidocrocite titanate) have been synthesized by facile ion exchange methodology and subjected to systematic electrochemical studies. It was found that Ni-intercalated on K-rich birnessite (Ni-KMO) presents an onset overpotential (ηonset) as low as 100 mV and overpotential at 10 mA cm−2 (η10) of 206 mV in pH = 14 electrolyte. By combining electrochemical methods and X-ray absorption and emission spectroscopies (XAS and XES), we demonstrate Ni sites are the active sites for OER catalysis and that the Mn3+ sites facilitate Ni intercalation during the ion-exchange process, but display no observable contribution towards OER activity. The effect of the pH and the nature of the supporting electrolyte on the electrochemical performance was also evaluated.
The aim of this study is to develop nanometer-thin epoxy-based films on aluminium alloy AA2024-T3 as a model coating system for high resolution corrosion studies. Spin coating was used for the layer-by-layer (LbL) deposition of poly-(ethylenimine) (PEI) and poly([o-cresyl glycidyl ether]-co-formaldehyde) (CNER) bilayers. The film chemistry and the cross-linking process were characterized by means of Fourier-transform infrared spectroscopy (FTIR).
Ellipsometric data confirmed the linear increase of film thickness. The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) results indicate the improvement of the film barrier properties with increasing film thickness. Mapping of the topography and the volta potential was performed by means of scanning Kelvin probe force microscopy (SKPFM).
The results indicate the presence of a homogeneous film structure, while the intermetallic phases can still be identified below the coating. The SKPFM Analysis confirmed that the model films are suitable for investigation of corrosion processes at the coating/metal interface.
Mixed ionic electronic conducting ceramics Nd6-yWO12-d (d is the Oxygen deficiency) provide excellent stability in harsh environments containing strongly reactive gases such as CO2, CO, H2, H2O or H2S. Due to this chemical stability, they are promising and cost-efficient candidate materials for gas separation, catalytic membrane reactors and protonic ceramic fuel cell technologies. As in La6-yWO12-d, the ionic/electronic transport mechanism in Nd6-yWO12-d is expected to be largely controlled by the crystal structure, the conclusive determination of which is still lacking. This work presents a crystallographic study of Nd5.8WO12-d and molybdenum-substituted Nd5.7W0.75Mo0.25O12-d prepared by the citrate complexation route. High-resolution synchrotron and neutron powder diffraction data were used in combined Rietveld refinements to unravel the crystal structure of Nd5.8WO12-d and Nd5.7W0.75Mo0.25O12-d. Both investigated samples crystallize in a defect fluorite crystal structure with space group Fm3m and doubled unit-cell parameter due to cation ordering. Mo replacesWat bothWyckoff sites 4a and 48h and is evenly distributed, in contrast with La6-yWO12-d. X-ray absorption spectroscopy as a function of partial pressure pO2 in the near-edge regions excludes oxidation state changes of Nd (Nd3+) and W(W6+) in reducing conditions: the enhanced hydrogen permeation, i.e. ambipolar conduction, observed in Mo-substituted Nd6-yWO12-d is therefore explained by the higher Mo reducibility and the creation of additional – disordered – oxygen vacancies.
X-ray computed tomography has many applications in materials science and non-destructive testing. While the standard filtered back-projection reconstruction of the radiographic data sets is fast and simple, it typically fails in returning accurate results from missing or inconsistent projections. Among the alternative techniques that have been proposed to handle such data is the Direct Iterative REconstruction of Computed Tomography Trajectories (DIRECTT) algorithm. We describe a new approach to the algorithm, which significantly decreases the computational time, while achieving a better reconstruction quality than that of other established algorithms.
Phosphorus (P) recovery from sewage sludge ash (SSA) is one of the most promising approaches of phosphate rock substitution in mineral fertilizers and might be a sustainable way to secure supply of this raw material in the future. In the current investigation, the process of thermochemical treatment of SSA was applied to SSA coming from selected mono-incineration plants of municipal sewage sludge in Poland (Cracow, Gdansk, Gdynia, Lodz, Kielce and Szczecin).
The Polish SSA was thermochemically converted in the presence of sodium (Na) additives and a reducing agent (dried sewage sludge) to obtain secondary raw materials for the production of marketable P fertilizers. The process had a positive impact on the bioavailability of phosphorus and reduced the content of heavy metals in the obtained products. The P solubility in neutral Ammonium citrate, an indicator of its bioavailability, was significantly raised from 19.7–45.7% in the raw ashes and 76.5–100% in the thermochemically treated SSA. The content of nutrients in the recyclates was in the range of 15.7–19.2% P2O5, 10.8–14.2% CaO, 3.5–5.4% Na2O, 2.6–3.6% MgO and 0.9–1.3% K2O. The produced fertilizer raw materials meet the Polish norms for trace elements covered by the legislation: the content of lead was in the range 10.2–73.1 mg/kg, arsenic 4.8–22.7 mg/kg, Cadmium 0.9–2.8 mg/kg and mercury <0.05 mg/kg. Thus, these products could be potentially directly used for fertilizer production. This work also includes an analysis of the possibilities of using ashes for fertilizer purposes in Poland, based on the assumptions indicated in the adopted strategic and planning documents regarding waste management and fertilizer production.
Superficial white matter (SWM) contains the most cortico-cortical white matter connections in the human brain encompassing the short U-shaped association fibers. Despite its importance for brain connectivity, very little is known about SWM in humans, mainly due to the lack of noninvasive imaging methods. Here, we lay the groundwork for systematic in vivo SWM mapping using ultrahigh resolution 7 T magnetic resonance imaging. Using biophysical modeling informed by quantitative ion beam microscopy on postmortem brain tissue, we demonstrate that MR contrast in SWM is driven by iron and can be linked to the microscopic iron distribution. Higher SWM iron concentrations were observed in U-fiber–rich frontal, temporal, and parietal areas, potentially reflecting high fiber density or late myelination in these areas. Our SWM mapping approach provides the foundation for systematic studies of interindividual differences, plasticity, and pathologies of this crucial structure for cortico-cortical connectivity in humans.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect wood from termite attack.
The 13CrMo4-5 ferritic steel is commonly used in power plants, due to its favorable mechanical properties. According to EN 10028-2, this steel can be used at temperatures up to 570°C because of its creep behavior. The inefficient corrosion resistance limits the application of this steel to lower temperatures depending on the gas temperature and slag formation. Therefore, the application of a highly resistant Ni-based coating is proposed to extend the corrosion resistance of elements made of ferritic steel. The corrosion test was performed in an environment containing a mixture of gases, like O2, COx, and SOx, and deposited ashes with elements, e.g., Na, Cl, Ca, Si, C, Fe, and Al. The exposure time was, respectively, 240 h, 1000 h and 4500 h at a temperature of 600°C. The oxide scale formed on the 13CrMo4-5 steel was significantly thicker than on the IN686 coating. The microstructure and chemical and phase compositions of the oxide scale were investigated using light optical microscopy together with scanning and transmission electron microscopy techniques. Energy dispersive x-ray analyses were performed when appropriate.
This paper reports the formation of zinc phosphate nanoparticles from the artificial digestion of zinc chloride. Initially, the formation of amorphous primary particles with a mean radius of 1.1 nm is observed, alongside the formation of larger, protein stabilized aggregates. These aggregates, with a radius of gyration of 37 nm, are observed after 5 minutes of exposure to artificial saliva and are shown to be colloidally stable for a minimum time of two weeks. The initially formed primary particles are thought to consist of amorphous zinc phosphate, which is then transformed into crystalline Zn3(PO4)2·4H2O over the course of two weeks. Our results demonstrate that the interaction of inorganic salts with bodily fluids can induce the formation of de novo nanoparticles, which in turn, provides insights into how zinc‐enriched foods may also facilitate the formation of nanoparticles upon contact with saliva. As such, this may be considered as an undesirable (bio)mineralization.
Approximant-based orientation determination of quasicrystals using electron backscatter diffraction
(2020)
Orientation mapping of quasicrystalline materials is demonstrated using crystalline approximant structures in the technique of electron backscatter diffraction (EBSD). The approximant-based orientations are symmetrised according to the rotational point group of the quasicrystal, including the visualization of orientation maps using proper colour keys for quasicrystal symmetries. Alternatively, approximant-based orientation data can also be treated using pseudosymmetry post-processing options in the EBSD system software, which enables basic grain size estimations. Approximant-based orientation analyses are demonstrated for icosahedral and decagonal quasicrystals.
In this work the flexural rigidity of individual large diameter multi-walled carbon nanotubes (MWCNTs) was investigated. The bending modulus were obtained by detecting the resonance frequencies of mechanically excited cantilevered carbon nanotubes using the so-called dynamic scanning electron microscopy technique, and applying the Euler–Bernoulli beam theory. For the nanotubes studied, we determined a modulus of up to 160 GPa. This agrees with values reported by other authors for MWCNTs produced by catalytic chemical vapor deposition, however, it is 6-8 times smaller than values reported for single and multi-walled carbon nanotubes produced by arc-discharge synthesis. Toxicological studies with carbon nanotubes have been showing that inhaled airborne nanofibers that reach the deep airways of the respiratory system may lead to serious, asbestos-like lung diseases. These studies suggested that their toxicity critically depends on the fiber flexural rigidity, with high rigidity causing cell lesions. To complement the correlation between observed toxicological effects and fiber rigidities, reliable and routinely applicable measurement techniques for the flexural rigidity of nanofibers are required.
The aim of this study is to increase the tribological performance of hot stamping tools by using a laser implantation process. This technique allows the fabrication of separated, elevated and dome-shaped microfeatures on the tool surface in consequence of a localized dispersing of ceramic particles via pulsed laser radiation. Hence, the topography and material properties of the tool are modified, which influences the tribological interactions at the blank-die interface. However, an appropriate selection of ceramic particles is an essential prerequisite, in order to obtain tailored and highly wear resistant surface features. In this regard, different titanium-based hard particles (TiB2 and TiN) were laser-implanted on hot working tool specimens and subsequently tested by means of a modified pin-on-disk test regarding to their wear and friction behavior.
The use of load and structural performance measurement information is vital for efficient structural integrity management and for the cost of energy production with Offshore Wind Turbines (OWTs). OWTs are dynamically sensitive structures subject to an interaction with a control unit exposed to repeated cyclic wind and wave loads causing deterioration and fatigue. This study focuses on the quantification of the value of structural and environmental information on the integrity management of OWT structures, with the focus on fatigue of welded joints. By utilizing decision analysis, structural reliability methods, measurement data, as well as the cost-benefit models, a Value of Information (VoI) analysis can be performed to quantify the most beneficial measurement strategy. The VoI assessment is demonstrated for the integrity management of a butt welded joint of a monopile support structure for a 3 MW OWT with a hub height of approximately 71m. The conditional value of three-year measured oceanographic information and one-year strain monitoring information is quantified posteriori in conjunction with an inspection and repair planning. This paper provides insights on how much benefits can be achieved through structural and environmental information, with practical relevance on reliability-based maintenance of OWT structures.
Surface nanostructuring enables the manipulation of many essential surface properties. With the recent rapid advancements in laser technology, a contactless large‐area processing at rates of up to m2 s−1 becomes feasible that allows new industrial applications in medicine, optics, tribology, biology, etc. On the other hand, the last two decades enable extremely successful and intense research in the field of so‐called laser‐induced periodic surface structures (LIPSS, ripples). Different types of these structures featuring periods of hundreds of nanometers only—far beyond the optical diffraction limit—up to several micrometers are easily manufactured in a single‐step process and can be widely controlled by a proper choice of the laser processing conditions. From a theoretical point of view, however, a vivid and very controversial debate emerges, whether LIPSS originate from electromagnetic effects or are caused by matter reorganization. This article aims to close a gap in the available literature on LIPSS by reviewing the currently existent theories of LIPSS along with their numerical implementations and by providing a comparison and critical assessment of these approaches.
In a recent publication the authors have presented theoretical and experimental results indicating that the Jacobson–Stockmayer (JS) theory does not provide a correct description of reversible polycondensations for all polymers and for high conversions (e.g. polycondensation in bulk). In this context reversibility means that all condensation step whether resulting in chain growth or in cyclization are reversible and thus, part of an equilibrium. The first two sections of that paper were focused on the demonstration that small, and above all, large cycles can be formed by end-to-end (ete) cyclization in reversible like in irreversible polycondensations. A significant contribution of ete-cyclization to the course of reversible polycondensations was denied by J + S apparently as a contribution to Florýs dogma, that the end groups of long polymer chains will never meet.
Hydrogen economy is a central aspect of future energy supply, as hydrogen can be used as energy storage and fuel. In order tomake water electrolysis efficient, the limiting oxygen evolution reaction (OER) needs to be optimized. Therefore, C-based composite materials containing earth-abundant Fe and Mn were synthesized, characterized and tested in the OER. For pyrolysis temperatures above 700°C N-rich multi-walled carbon nanotubes (MWCNT) are obtained. Inside the tubes Fe3C particles are formed, Fe and Mn oxides are incorporated in the carbon matrix and metal spinel nanoparticles cover the outer surface. The best catalyst prepared at 800°C achieves a low overpotential of 389 mV (at 10 mA/cm2) and high stability (22.6 h). From electrochemical measurements and characterization it can be concluded that the high activity is mainly provided by MWCNT, Fe3C and the metal oxides in the conductive carbon matrix. The metal spinel nanoparticles in
contrast protect the MWCNT from oxidation and thereby contribute to the high stability.
Physical storage of gaseous hydrogen under high-pressure in glassy micro-containers such as spheres and capillaries is a promising concept for enhancing safety and the volumetric capacity of mobile hydrogen storage systems. As very low permeation through the container wall is required for storage of compressed hydrogen, development of glasses of minimal hydrogen permeability is needed. For this purpose, one has to understand better the dependence of hydrogen permeability on glass structure. The paper points out that minimizing the accessible free volume is as one strategy to minimize hydrogen permeability. Based on previously measured and comprehensive literature data, it is shown that permeation is independently controlled by ionic porosity and network modifier content. Thus, ionic porosity in modified and fully polymerized networks can be decreased equally to the lowest hydrogen permeability among the glasses under study. Applying this concept, a drop of up to 30,000 with respect to the permeation of hydrogen molecules through silica glass is attainable.