Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (190) (entfernen)
Sprache
- Englisch (184)
- Deutsch (5)
- Portugiesisch (1)
Schlagworte
- Concrete (15)
- Corrosion (14)
- Alkali-activated materials (13)
- Flame retardant (9)
- Cement (6)
- Durability (5)
- Additive manufacturing (4)
- Carbon steel (4)
- Cone calorimeter (4)
- Fatigue (4)
- Flame retardancy (4)
- Mechanical properties (4)
- Phosphorus (4)
- Rheology (4)
- Rubber (4)
- Structural health monitoring (4)
- Acid resistance (3)
- Compressive strength (3)
- Corrosion testing (3)
- DFG SPP 2005 (3)
- Fire protection (3)
- Fire resistance (3)
- Fire test (3)
- Graphene (3)
- Ground vibration (3)
- High-density polyethylene (3)
- Hyperbranched (3)
- Impurities (3)
- Lithium-ion battery (3)
- Proper generalized decomposition (3)
- Spalling (3)
- Thermal runaway (3)
- Value of information (3)
- Accelerated testing (2)
- Alkali silica reaction (2)
- Aluminium (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Baustoffrecycling (2)
- Bridge (2)
- Building and Construction (2)
- Bus interior materials (2)
- CCUS (2)
- Calcined clay (2)
- Carbon fibers (2)
- Carbonation (2)
- Cement matrix (2)
- Characterization (2)
- Civil and Structural Engineering (2)
- Corrosion resistance (2)
- Crop protection products (2)
- Depletion force (2)
- Dripping (2)
- EPDM (2)
- Electrochemical methods (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FTIR (2)
- Fire behaviour (2)
- Fire statistics (2)
- Flame retardants (2)
- Flammability (2)
- Full notch creep test (FNCT) (2)
- Gel electrolytes (2)
- Geothermal (2)
- High-performance concrete (2)
- Human behaviour (2)
- Impact simulation (2)
- Intumescent coating (2)
- Isogeometric analysis (2)
- Laser scanning microscopy (LSM) (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leichte Gesteinskörnungen (2)
- Luminescence (2)
- MIC (2)
- Mauerwerkbruch (2)
- Microstructure (2)
- Model Updating (2)
- Model updating (2)
- Moisture transport (2)
- Monitoring (2)
- Nanocomposite (2)
- Nanocomposites (2)
- PFEM (2)
- Polymers of Intrinsic Microporosity (2)
- Polyurethane (2)
- Portland cement (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Reliability (2)
- Rice husk ash (2)
- SHM (2)
- Smoke gas emission (2)
- Sr isotopes (2)
- Structural Health Monitoring (2)
- Structural sealant glazing (2)
- Synergy (2)
- Synthesis (2)
- Thermal treatment (2)
- Thermoplastic polyurethane (2)
- Train-induced ground vibration (2)
- UL 94 (2)
- Verkehrsinfrastukturen (2)
- Weathering (2)
- 3-dimensional microscopy (1)
- 3DCP (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- AFm phase (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Acetylation (1)
- Acid attack (1)
- Acoustic emission (1)
- Acoustic emission monitoring (1)
- Adaptive importance sampling (1)
- Adhesives (1)
- Agar (1)
- Ageing (1)
- Aging (1)
- Agricultural by-product (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- Alkali aggregate reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali–silica reaction (1)
- Aluminium hydroxide (1)
- Aluminum trihydroxide (ATH) (1)
- Analytical methods (1)
- Angle of repose (1)
- Anode (1)
- Aquifer fluid (1)
- Architecture (1)
- Aromatic (1)
- Artificial ageing (1)
- Asymptotic local approach (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Austenitic stainless steel (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated expansion measurement (1)
- Automated operational modal analysis (1)
- Axle sequence (1)
- Bacterial attachment (1)
- Bauwerksüberwachung (1)
- Bayesian Inference (1)
- Bayesian updating of stress ranges (1)
- Behmite (1)
- Belastungstest (1)
- Bench-scale fire resistance (1)
- Bending (1)
- Beton (1)
- Binary zinc alloys (1)
- Bingham fluid (1)
- Bio-based concrete (1)
- Biocomposites (1)
- Biodegradable (1)
- Biofilm (1)
- Biomaterials (1)
- Bioreceptivity (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bituminous binders (1)
- Blade (1)
- Blended cement (1)
- Boehmite (1)
- Boson peak (1)
- Boundary element (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Building response (1)
- Building with earth (1)
- Burning behavior (1)
- Burning behaviour (1)
- CCS (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- Cables (1)
- Calorimetry (1)
- Carbon (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbonation behaviour (1)
- Casing (1)
- Cathode active material (1)
- Cement hydration (1)
- Cement paste (1)
- Cement suspension (1)
- Ceramics (1)
- Charge density (1)
- Charring (1)
- Chemical admixtures (1)
- Chemical synthesis (1)
- Chemisorption (1)
- Chloride (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Coating (1)
- Combined finite-element boundary-element method (1)
- Components of excitation (1)
- Composite material (1)
- Composites (1)
- Composites in fire (1)
- Compressed earth (1)
- Compression tests (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete beam (1)
- Concrete printing (1)
- Concrete repair (1)
- Condensate (1)
- Condensed Matter Physics (1)
- Cone claorimeter (1)
- Consequences (1)
- Construction and demolition waste (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Covalent Organic frameworks (1)
- Crack (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Critical chloride content (1)
- Crosslinking (1)
- Crystalline admixture (1)
- Crystalline phase identification (1)
- Cyclic weathering (1)
- DGEBA (1)
- DIN tube furnace (1)
- DMDHEU (1)
- DOPO (1)
- Damage Identification (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection (1)
- Damage detection systems (1)
- Damage evolution (1)
- Data infrastructures (1)
- Datenfusion (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Degradation (1)
- Dehydration (1)
- Demolition wastes (1)
- Dendritic (1)
- Denkmalpflege (1)
- Design of experiment (1)
- Destructive testing (1)
- Detection (1)
- Deteriorating structures (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dissolution (1)
- Distributed fiber optic sensing (1)
- Distributed fibre optic sensor (1)
- Domain decomposition methods (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Durability assessment (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic excitation (1)
- Dynamic loads (1)
- EPR (1)
- EVA (1)
- Earth block masonry (1)
- Earth material (1)
- Egress (1)
- Elastomers (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Elevated temperature (1)
- Engineering data (1)
- Engineering egress data (1)
- Environmental Chemistry (1)
- Environmental and Operational Variability (1)
- Environmental influence (1)
- Epoxies (1)
- Erosion (1)
- Estimation (1)
- Ethylene-vinyl acetate (1)
- European project (1)
- Evacuation (1)
- Excitation forces (1)
- Explosion limit (1)
- FAIR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Facade (1)
- Fatigue damage (1)
- Fatigue strength (1)
- Fiber optic sensor (1)
- Fibre bragg grating (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite elements (1)
- Fire (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible wheelset (1)
- Flow properties (1)
- Flowability (1)
- Flue gas desulfurization gypsum (1)
- Foam (1)
- Foams (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Frost salt attack (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Furniture (1)
- Future‑oriented standards (1)
- GPU Parallel computing (1)
- Gas analysis (1)
- Gas emission (1)
- Gas explosion (1)
- Gel-bound Colorants (1)
- General Materials Science (1)
- Geometric vehicle and track irregularities (1)
- Geopolymers (1)
- Gips (1)
- Glass fiber-reinforced composites (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Green facades (1)
- Green urban construction (1)
- Grinding (1)
- Halogen-free (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner ratio (1)
- Heat of combustion (1)
- Heat release (1)
- Heat transfer (1)
- Heat treatment (1)
- Heavy metal removal (1)
- Heterogeneity (1)
- High density polyethylene (1)
- High heat resistance (1)
- High throughput screening (1)
- High-rise building (1)
- High‐nitrogen steel (1)
- Horizontal wind turbine (1)
- Hot storage (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hydration (1)
- Hydration stoppage (1)
- Hydrogarnet (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- IEPE (1)
- ISO 9223 (1)
- Icing conditions (1)
- Identification and quantification of additives (1)
- Ignition (1)
- Illite (1)
- In-situ ED-XRD (1)
- In-situ testing (1)
- Inclination angle (1)
- Industrial by-products (1)
- Infra-lightweight concrete (1)
- Infraleichtbeton (1)
- Interlaboratory test (1)
- Intumescent additives (1)
- Ionic stregth (1)
- Kaolinite (1)
- Knowledge graphs (1)
- Korrosion (1)
- LBM-DEM (1)
- LIBS (1)
- Laminate design (1)
- Laminates (1)
- Large components (1)
- Large-scale tests (1)
- Laser-induced slip casting (1)
- Lateral dynamic displacement (1)
- Leather (1)
- Leather waste (1)
- Leichtgranulate (1)
- LiFePO4 (1)
- Lightweight aggregates (1)
- Limestone powder (1)
- Linear elastic fracture mechanics (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load identification (1)
- Load tests (1)
- Local approaches (1)
- Localized model order reduction (1)
- Low-carbon construction (1)
- Low-frequency shaker (1)
- Lunar regolith (1)
- MCC (1)
- Magnesium chloride brine (1)
- Magnesium hydroxide (1)
- Mapping for unseparable load (1)
- Martensitic steels (1)
- Maschinelles Lernen (1)
- Maschinenfundament (1)
- Mass loss (1)
- Material moisture (1)
- Materials (1)
- Materials Chemistry (1)
- Materials informatics (1)
- Measurement campaigns (1)
- Mechanical Engineering (1)
- Mechanical loading (1)
- Mechanical strength (1)
- Mechanics of Materials (1)
- Mechanistic study (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Metals and Alloys (1)
- Metathesis (1)
- Methyl group rotation (1)
- Micro-CT scanning (1)
- Microbially induced corrosion (1)
- Micromechanical modelling (1)
- Microplastic (1)
- Microscopy (1)
- Middle Pleistocene (1)
- Mitigation (1)
- Mitigation strategies (1)
- Mix-design (1)
- Model Building (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modern (1)
- Modes of action (1)
- Moisture content (1)
- Molecular mass distribution (1)
- Monitoring strategy (1)
- Monopile support structure (1)
- Mortar method (1)
- Movement characteristics (1)
- Multi-beam track model (1)
- Multilayer graphene (1)
- Multiscale methods (1)
- Multivariate evaluation (1)
- Nanoparticles (1)
- Natural rubber (1)
- Nelson’s method (1)
- Network (1)
- Neutron Scattering (1)
- Neutron scattering (1)
- Nitric acid (1)
- Non-destructive testing (1)
- Nondestructive testing (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Numerische Analysen (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Ontologies (1)
- Operational Modal Analysis (1)
- Optical backscatter reflectometry (1)
- Optical criterion of brittleness (1)
- Organophosphonate (1)
- Orthotropic steel deck (1)
- Oxyfuel (1)
- PCE (1)
- PVD hard coating (1)
- Packaging (1)
- Particle-bed binder jetting (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Permeation measurements (1)
- Phase development (1)
- Phospha-Michael addition (1)
- Phosphine oxide (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Physisoprtion (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polyethylene (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer of intrisic microporosity (1)
- Polymers (1)
- Polyolefins (1)
- Polyphosphoester (1)
- Polysaccharides (1)
- Polyurethane foams (1)
- Pore pressure (1)
- Pore structure (1)
- Porosity (1)
- Porous media (1)
- Portland clinker (1)
- Post-fire testing (1)
- Posterior fatigue reliability (1)
- Potassium ions (1)
- Powders (1)
- Prepregs (1)
- Pressure-sensitive adhesive (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Preventive strategies (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Probability of failure (1)
- Process upscaling (1)
- Proof loading (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Protective coatings (1)
- Provenance (1)
- Provenancing (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Quality (1)
- Quantitative moisture measurement (1)
- Railway induced vibration (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Reactive fire protection system (1)
- Real scale test (1)
- Recommendations (1)
- Recovery (1)
- Recyclable (1)
- Recycled materials (1)
- Recycling (1)
- Reduced order models (1)
- Reference values (1)
- Referenzbeispiel (1)
- Regulation (1)
- Reinforced concrete (1)
- Reinforcement corrosion (1)
- Relative humidity (1)
- Remote sensing vibrometer (1)
- Reproducibility (1)
- Resonance (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Rhenanite (1)
- Rheometry (1)
- Rigid (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Risk (1)
- Risk assessment (1)
- Road pavement (1)
- Room fire (1)
- Rregulations (1)
- Safety (1)
- Sample piece size (1)
- Scattering (1)
- Schnellladung (1)
- Scientific workflows (1)
- Screening test (1)
- Sealing structures (1)
- Self-healing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sift-proofness (1)
- Silica (1)
- Silicone elastomer (1)
- Simulation (1)
- Sintering (1)
- Size effect (1)
- Slag (1)
- Slow crack growth (SCG) (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil (1)
- Soil properties (1)
- Sol-gel (1)
- Solid-state NMR (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Spectral elements (1)
- Stainless steel (1)
- Static axle loads (1)
- Statistical pattern recognition (1)
- Steel (1)
- Steel construction (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steinergänzungsmassen (1)
- Stereophotogrammetry (1)
- Stiffness variation (1)
- Stone Age (1)
- Strain (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress corrosion tests (1)
- Stress intensity factor (1)
- Stress stiffening (1)
- Stress-strain relation (1)
- Structural health monitoring (SHM) (1)
- Structural reliability (1)
- Structural system identification (1)
- Strukturmonitoring (1)
- Strätlingite (1)
- Sulfate attack (1)
- Sulfide (1)
- Sulfur containing polymers (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Surface conditions (1)
- Surface interactions (1)
- Surfaces, Coatings and Films (1)
- Sustainability (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- Synergism (1)
- System Identification (1)
- System identification (1)
- TED-GC/MS (1)
- TGA-FTIR (1)
- TGA-MS (1)
- Tannery industry (1)
- Tapes (1)
- Temperature effect (1)
- Tension members (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Testing (1)
- Testing methods (1)
- Testing procedure (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thermal Analysis (1)
- Thermal Gravimetric Analysis (1)
- Thermal analysis (1)
- Thermal transient problem (1)
- Thermodynamic modelling (1)
- Throwing-stick (1)
- Titanium nitride (1)
- Tobermorite (1)
- Tool comparison (1)
- Toxicity (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Train passage (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrasonic testing (1)
- Ultrasound gel (1)
- Uncertainty Quantification (1)
- Utility and decision theory (1)
- Value of action analysis (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Vitrimer (1)
- Vocabulary providers (1)
- Vulcanization (1)
- Waste management (1)
- Waste streams (1)
- Water transport (1)
- Wave propagation (1)
- Wavenumber integrals (1)
- Waxes (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Wellenausbreitung (1)
- Wheelset accelerations (1)
- Whole-chain CCS scenario (1)
- Wildfire (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine tower (1)
- Wire arc additive manufacturing (1)
- Wire break (1)
- Wood (1)
- Wood modification (1)
- Workflow management (1)
- Working life (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- Xpoxy resin (1)
- Yield stress (1)
- ZfP (1)
- Zinc (1)
- Zinc coatings (1)
- Znc (1)
- layered soil (1)
- magnesium (1)
- melamine (1)
- mortar method (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- spectral elements (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (190) (entfernen)
Paper des Monats
- ja (16)
In the processing of nanocomposites, high shear stresses at elevated tempera-tures orient two-dimensional nanoparticles like graphene. This orientationleads to anisotropic mechanical, thermal or barrier properties of the nanocom-posite. This anisotropy is addressed in this study by comparing graphene (few-layer graphene, FLG) with a nanoscaled carbon black (nCB) at a filler contentof 3 phr, by varying the vulcanization, and by comparing different FLG con-tents. Transmission electron microscopy gives insight into the qualitative ori-entation in the nanocomposite with FLG or nCB. The storage moduli paralleland normal to the orientation reveal the direction dependency of reinforce-ment through dynamic mechanical analysis (DMA). Dimensional swellingmeasurements show a restriction of the expansion parallel to the FLG orienta-tion, and an increased expansion normal to the orientation. The vulcanizationsystem and crosslinking determine the respective level of property values, andhigher crosslinking densities increase the anisotropy in DMA resulting invalues of up to 2.9 for the quantified anisotropy factor. With increasing FLGcontent, the anisotropy increases. A comparison of the results reveals swellingmeasurements as the most suitable method for the determination of anisot-ropy. Compared to recent literature, the presented processing induces higheranisotropy, leading to higher reinforcing effects in the direction of orientation
Several studies show that thermal and hydrothermal treatment can further improve the excellent properties of UHPC in terms of mechanical strength and durability. While for the thermal treatment the increase in strength is attributed to an intensified pozzolanic and hydraulic reaction, for the hydrothermal treatment previous studies accredited it mostly to the formation of tobermorite. In the presented study thermal and hydrothermal treatment of UHPC samples was systematically varied and the phase formation analysed related to the strength development of a reference sample cured for 28 days in water. For the thermal treatment the results show that the strength increase depends on the protection against desiccation and can be ascribed to an improved pozzolanic reaction of the siliceous fillers. To achieve a significant enhancement of strength, a pre-storage time of few days and a long dwell time at elevated temperature/pressure are required. For the hydrothermal treatment already heating the specimens up to 185 °C in saturated steam followed by an immediate cooling leads to a substantial increase in compressive strength. Pre-storage time did not affect the result as far as a minimum of several hours is guaranteed. The improved performance is due to an increase in the pozzolanic and hydraulic reaction. Surprisingly, tobermorite was only found within a very thin layer at the surface of the sample, but not in the bulk. Sulphate and aluminium stemming from the decomposition of the ettringite are bound in the newly formed phases hydroxylellestadite and hydrogarnet.
To set up recommendations on how to define “reasonable minimum composition thresholds” for CO2 streams to access CO2 pipeline networks, we investigated potential impacts of CO2 streams with different and temporally variable compositions and mass flow rates along the CCS chain. All investigations were based on a generic “CCS cluster scenario” in which CO2 streams captured from a spatial cluster of eleven emitters (seven fossil-fired power plants, two cement plants, one refinery and one steel mill) are collected in a regional pipeline network. The resulting CO2 stream (19.78 Mio t impure CO2 per year) is transported in a trunk line (onshore and offshore) and injected into five generic replicate storage structures (Buntsandstein saline aquifers) offshore. Experimental investigations and modeling of selected impacts revealed beneficial as well as adverse impacts of different impurities and their combinations. Overall, no fundamental technical obstacles for transporting, injecting and storing CO2 streams of the considered variable compositions and mass flow rates were observed. We recommend to define minimum composition thresholds for each specific CCS project through limiting
i) the overall CO2 content,
ii) maximum contents of relevant impurities or elements,
iii) acceptable variability of concentrations of critical impurities, and defining impurity combinations to be avoided.
Additive manufacturing (AM) of alkali-activated materials is a promising method for producing ceramic precursors, construction elements and other parts. A recently introduced AM process is laser-induced slip casting of lithium aluminate/microsilica slurries, which yields parts with excellent mechanical strengths. To clarify the underlying mechanisms, μ-Raman spectroscopy was applied to parts produced by the process, and the dissolution and hydration of lithium aluminate was studied inter alia using conventional and in-situ X-ray diffraction. The results show that significant dissolution of lithium aluminate occurs, particularly at increased temperatures during laser interaction, which leads to an increase of pH and precipitation of an akopovaite-like Li-Al-CO3 layered double hydroxide. The increase of the pH is likely to induce dissolution of the microsilica and possibly formation of a hydrous lithium aluminosilicate gel. These observations explain the strength evolution of the studied parts and can also aid the development and improvement of related AM methods.
Textile-reinforced concrete (TRC) is a material consisting of high-performance concrete (HPC) and tensile reinforcement comprised of carbon roving with epoxy resin matrix. However, the problem of low epoxy resin resistance at higher temperatures persists. In this work, an alternative to the epoxy resin matrix, a non-combustible cement suspension (cement milk) which has proven stability at elevated temperatures, was evaluated. In the first part of the work, microscopic research was carried out to determine the distribution of particle sizes in the cement suspension. Subsequently, five series of plate samples differing in the type of cement and the method of textile reinforcement saturation were designed and prepared. Mechanical experiments (four-point bending tests) were carried out to verify the properties of each sample type. It was found that the highest efficiency of carbon roving saturation was achieved by using finer ground cement (CEM 52.5) and the pressure saturation method. Moreover, this solution also exhibited the best results in the four-point bending test. Finally, the use of CEM 52.5 in the cement matrix appears to be a feasible variant for TRC constructions that could overcome problems with its low temperature resistance.
Optimization of the duration of Structural Health Monitoring (SHM) campaigns is rarely performed.
This article provides a utility-based solution to posteriorly determine: i) optimal monitoring Durations and ii) the extension of the service life of the welds on a steel bridge deck. The approach is Illustrated with a case study focusing on remaining fatigue life estimation of the welds on the orthotropic steel deck of the Great Belt Bridge, in Denmark. The identification of the optimal monitoring duration and the decision about extending the service life of the welds are modelled by maximizing the expected benefits and minimizing the structural risks. The results are a parametric analysis, mainly on the effect of the target probability, benefit, cost of failure, cost of rehabilitation, cost of monitoring and Discount rate on the posterior utilities of monitoring strategies and the choice of service life considering the risk variability and the costs and benefits models. The results show that the decision on short-term monitoring, i.e., 1 week every six months, is overall the most valued SHM strategy. In addition, it is found that the target probability is the most sensitive parameter affecting the optimal SHM Durations and service life extension of the welds.
Ground vibrations near railway lines are generated by the forces that are acting between wheel and rail. It seems to be a straight forward assumption that the vehicle dynamics are important for the level and the frequencies of the excitation forces. Different vehicle dynamics phenomena are analysed for their role in the excitation of ground vibrations: rigid body modes of the bogies, elastic (bending) modes of the car body, and elastic modes of the wheelset. The theoretical analyses use rigid body models, simplified elastic models, and detailed elastic models. Some of these problems are vehicle–track interaction problems where 3D finite‑element boundary‑element models have been used for the track and soil. It is shown that the rigid or flexible vehicle modes are well in the frequency range of ground vibrations (4 to 100 Hz). They have an influence on the excitation force but the additional forces are rather small and can be neglected in ground vibration prediction. The theoretical results are checked by experimental results of a simultaneous measurement of vehicle,
track, and ground vibrations.
Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results.
The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
The Bundesanstalt für Materialforschung und -prüfung (BAM) collaborates with TNO to develop a software framework for automated calibration of structural models based on monitoring data. The ultimate goal is to include such models in the asset management process of engineering structures. As a basis for developing the framework, a multi-span road bridge consisting of ten simply supported steel box girders was selected as a test case. Our group measured output-only vibration data from one box girder under ambient conditions. From the data, we determined eigenfrequencies and mode shapes. In parallel, we developed a preliminary structural model of the box girder for the purpose of predicting its modal properties. In this contribution, we provide an overview of the measurement campaign, the operational modal analysis, the structural modeling and qualitatively compare the identified with the predicted modes. As an outlook, we discuss the further steps in the calibration process and future applications of the calibrated model.
Leather is among the most ancient, widely used materials worldwide. Industrial-scale leather production produces large quantities of organic waste attained during shaving and buffing steps during processing. In this study, leather wastes (LW) are used as fillers in flame retarded polymer composites. LW is investigated as a multifunctional bio-filler that enhances the fire performance of flame retarded poly(ethylene–vinyl acetate) (EVA) containing phosphorus flame retardants (P-FRs) ammonium polyphosphate (APP) or a melamine-encapsulated APP (eAPP). Using LW from tanneries as adjuvants to enhance P-FRs in EVA reduces industrial wastes that otherwise require costly waste management solutions. Materials are characterized multi-methodically via mechanical tests, electron microscopy, rheology, thermogravimetric analysis, evolved gas analysis, and condensed phase FTIR, also reaction-to-small-flames and cone calorimeter tests. EVA containing 10 wt-% LW and 20 wt-% P-FRs achieve 20% reductions in fire loads versus EVA, and up to 10% reduction in effective heats of combustion versus EVA with equal (30 wt-%) P-FR loadings. Enhanced char stabilization of EVA composites with LW and P-FRs lowered peaks of heat release rates up to 53% compared to EVA, and up to 40% compared to equal P-FRs loadings. Synergisms between LW and P-FRs in EVA are quantified. A chemical decomposition mechanism is proposed.