Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
Schlagworte
- Laser beam welding (25)
- Additive manufacturing (23)
- Welding (14)
- Microstructure (11)
- Additive Manufacturing (10)
- Hydrogen (10)
- Mechanical properties (10)
- Laser powder bed fusion (9)
- Residual stress (9)
- Residual stresses (9)
- Solidification cracking (8)
- Friction (7)
- Tribology (7)
- Ultrasonic-assisted milling (7)
- Wear (7)
- Creep-resistant steel (6)
- Laser metal deposition (6)
- Process monitoring (6)
- Thermography (6)
- Fatigue (5)
- Resistance spot welding (5)
- Surface integrity (5)
- TIG welding (5)
- AFM (4)
- AISI 316L (4)
- Diffusible hydrogen (4)
- Hardness (4)
- Heat accumulation (4)
- High-strength steel (4)
- Hybrid laser arc welding (4)
- Hybrid laser-arc welding (4)
- L-PBF (4)
- Laser Powder Bed Fusion (4)
- Neutron diffraction (4)
- Numerical modeling (4)
- Selective laser melting (SLM) (4)
- Stress relief cracking (4)
- Thick-walled steel (4)
- AGIL (3)
- Alloy 36 (3)
- Artificial neural network (3)
- Atomic force microscopy (3)
- DED (3)
- Deep penetration (3)
- Fatigue crack propagation threshold (3)
- Fatigue tests (3)
- Heat treatment (3)
- High entropy alloy (3)
- Hydrogen embrittlement (3)
- In situ measurement (3)
- In situ monitoring (3)
- Inconel 718 (3)
- Infrared thermography (3)
- LIBS (3)
- Laser powder bed fusion (L-PBF) (3)
- Mechanical Engineering (3)
- Numerical modelling (3)
- Polymers (3)
- Post weld heat treatment (3)
- Quality assurance (3)
- Steel (3)
- Submerged arc welding (3)
- Ti-6Al-4V (3)
- Tubular X-joints (3)
- Varestraint test (3)
- Weld pool shape (3)
- 316L (2)
- AISI 304L (2)
- Additive manufacturing (AM) (2)
- Alloy modification (2)
- Austenite-to-martensite transformation (2)
- Bragg-edge imaging (2)
- Bulge effect (2)
- Chemical composition (2)
- Computed Tomography (2)
- Computed tomography (2)
- Contact resonance (2)
- Crack (2)
- Cracking (2)
- Critical strain (2)
- Crystallographic texture (2)
- Cyclic R-curve (2)
- Data preparation (2)
- Debye–Waller factor (2)
- Deuterium (2)
- Diffusion (2)
- Directed Energy Deposition (2)
- Distortion (2)
- EBSD (2)
- Electron backscattered diffraction (2)
- Finite element simulation (2)
- Force-distance curves (2)
- Fracture (2)
- Full penetration (2)
- GMA welding (2)
- Gap bridgeability (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Grain refinement (2)
- Hardmetal (2)
- Heat control (2)
- High strength steels (2)
- High-entropy alloy (2)
- High-power laser beam welding (2)
- High-strength structural steel (2)
- Hot cracking (2)
- Hot stamping (2)
- Hydrogen Embrittlement (2)
- Hydrogen assisted cracking (2)
- Hydrogen-assisted cracking (2)
- Implant test (2)
- Inter layer time (2)
- LPBF (2)
- Laser beam melting (LBM) (2)
- Laser energy distribution (2)
- Laser hybrid welding (2)
- Laser-metal-deposition (2)
- Liquid metal embrittlement (2)
- Low transformation temperature (LTT) steel (2)
- Lubricants (2)
- Machining (2)
- Mechanics of Materials (2)
- Medium entropy alloy (2)
- Metals and Alloys (2)
- Microstructure characterization (2)
- Neutron imaging (2)
- Neutron radiography (2)
- Niobium carbide (2)
- Niobium carbide (NbC) (2)
- Numerical process simulation (2)
- Numerical simulation (2)
- Offshore (2)
- Optical flow (2)
- Pipeline steel (2)
- Plasma-transferred arc welding (2)
- Porosity (2)
- Post-weld heat treatment (2)
- Preheating (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Representative specimens (2)
- Residual Stress (2)
- Residual stress analysis (2)
- SSRT (2)
- Selective Laser Melting (2)
- Selective Laser Melting (SLM) (2)
- Simulation (2)
- Single pass welding (2)
- Software (2)
- Surface modification (2)
- Technical crack detection (2)
- Tensile properties (2)
- Texture (2)
- Thermal history (2)
- ToF-SIMS (2)
- Tool wear (2)
- Tribologie (2)
- WAAM (2)
- Weld pool dynamics (2)
- Wire arc additive manufacturing (2)
- X-ray diffraction (2)
- i-TRIBOMAT (2)
- 100Cr6 (AISI 52100) steel (1)
- 2101 duplex stainless steel (1)
- 3D Scanning (1)
- 3D printing (1)
- 9% Ni Steel (1)
- 9%Ni steel (1)
- AC magnetic field (1)
- AHSS (1)
- AM feature integration (1)
- ASTM E647 (1)
- Abdichtbauwerk (1)
- Accoustic emission (1)
- Additive Manufacturing (AM) (1)
- Additives (1)
- Advanced high strength steels (1)
- Advanced high-strength steel (1)
- Aging (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg (1)
- AlSi10Mg alloy (1)
- Alite (1)
- Alkyd resin-based coating (1)
- Aluminum alloys (1)
- Aluminum bronze (1)
- Analytical calculation (1)
- Applications (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- As-built LPBF IN718 alloy (1)
- Atomic force microscope (1)
- Austenitic stainless steels (1)
- Automated arc welding (1)
- Automated manufacturing (1)
- Automotive (1)
- Backlight (1)
- Bainitischer Schmiedestahl (1)
- Bauteilauslegung (1)
- Bayesian technique (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Bending test (1)
- Betriebsfestigkeit (1)
- Binders (1)
- Bismuth titanates (1)
- Bohrlochsonde (1)
- Bruchmechanik (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effects (1)
- CFD model (1)
- Cantilever microprobe (1)
- Carbide (1)
- Carbon (1)
- Carbon dioxide footprint (1)
- Carbon steel (1)
- Catalysis (1)
- Cellular substructure (1)
- Cermet (1)
- Characterisation (1)
- Characterization (1)
- Characterization of corrosion layers (1)
- Charakterisierung (1)
- Charpy impact toughness (1)
- Chunky graphite (1)
- Cimensional Accuracy (1)
- Circumferential weld (1)
- Clinker substitute (1)
- Clustering (1)
- Co-Cr-alloy (1)
- Cobalt-chromium alloy (1)
- Cold cracking (1)
- Cold cracking safety (1)
- Columnar crystal growth (1)
- Component test (1)
- Component-like test (1)
- Composites (1)
- Computed tomography (CT) (1)
- Computer vision (1)
- Condensed Matter Physics (1)
- Condition monitoring (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Core-shell structures (1)
- Corrosion (1)
- Crack closure effect (1)
- Crack-tip constraint (1)
- Creep (1)
- Creep behavior (1)
- Creep-resisting materials (1)
- Critical strain rate (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Crystal branch development (1)
- Crystal plasticity (1)
- Cutting forces (1)
- Cutting tool (1)
- Cyclic loading (1)
- Cylindrical turning (1)
- DED-EB (1)
- DED-arc (1)
- Damage prediction (1)
- Damage tolerance (1)
- Data evaluation methods (1)
- Data fusion (1)
- Data-driven quality assurance (1)
- Debye-Waller-Faktor (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Defect detection (1)
- Defects (1)
- Dental materials (1)
- Dichtungen (1)
- Diffraction (1)
- Diffraction-elastic constants (1)
- Diffusion/diffusivity (1)
- Digital Image Correlation (1)
- Digital image correlation (1)
- Digitalisation (1)
- Digitalization (1)
- Direct laser deposition (1)
- Directed energy deposition (1)
- Dislocation density (1)
- Dispersive XAS (1)
- Displacement (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Distortion upon baseplate removal (1)
- Ditigtal image correlation (1)
- Dual phase steel (1)
- Duplex AISI 2205 (1)
- Duplex stainless steel (1)
- Duplex stainless steels (1)
- Duplex steels (1)
- Dwell-time (1)
- EBAM (1)
- Edge quality (1)
- Effect of scanning strategies (1)
- Elastic modulus (1)
- Elastomers (1)
- Electrochemical permeation (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic forces (1)
- Electromagnetic stirring (1)
- Electromagnetic weld pool support (1)
- Electromagnetic weld pool support system (1)
- Electron backscatter diffraction (1)
- Electron beam welding (1)
- Electron microscopy (1)
- Element transport (1)
- Embedded electronics (1)
- Emisssivity (1)
- End crater (1)
- Endurance limit (1)
- Energy Engineering and Power Technology (1)
- Environmental conditions (1)
- Environmental impact categories (1)
- Error sources analysis (1)
- Evaporation (1)
- Experimental determination (1)
- Experimental procedure (1)
- FAIR data (1)
- FAT class (1)
- FEM (1)
- Fatigue Strength (1)
- Fatigue damage (1)
- Fatigue life (1)
- Fatigue limit (1)
- Fatigue properties (1)
- Femtosecond laser (1)
- Femtosecond laser processing (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferroelectricity/ferroelectric materials (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (FE) (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite element method (FEM) (1)
- Flange width (1)
- Flaw detection (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Formation (1)
- Fractography (1)
- Fracture Mechanics (1)
- Frequency domain (1)
- Frequenzanalyse (1)
- Friction stir welding (1)
- Fuel Technology (1)
- Fusion zone size (1)
- Galvanized steel (1)
- General analytical solutions (1)
- Geteilte Infrastruktur (1)
- Green Deal (1)
- HAZ-softening (1)
- HCF (1)
- HSLA steel (1)
- Hard metals (1)
- Hardly separable problem (1)
- Harmonisation (1)
- Hastelloy X (1)
- Heat Treatment (1)
- Heat source models (1)
- Heat-affected zone (1)
- High power laser beam welding (1)
- High process speeds (1)
- High strength steel (1)
- High-entropy alloys (1)
- High-pressure hydrogen environment (1)
- High-strength filler metals (1)
- High-strength steel filler metal (1)
- High-strength steels (1)
- Hochfester Stahl (1)
- Hollow Specimen Technique (1)
- Hollow specimen (1)
- Hollow specimen technique (1)
- Hot Cracks (1)
- Hot cracking test (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Hybrid Laser arc Welding (1)
- Hybrid repair (1)
- Hydraulic reactivity (1)
- Hydrogen Transfer Film (1)
- Hydrogen diffusion (1)
- Hydrogen measurement (1)
- IBESS (1)
- IBESS Approach (1)
- IN 718 (1)
- IN725 (1)
- ISO 12108 (1)
- Image processing (1)
- Image registration (1)
- Impact Absorbed Energy (1)
- Implants (1)
- In situ (1)
- In-situ process monitoring (1)
- In-situ tensile test (1)
- Inconel 625 (1)
- Industrial and Manufacturing Engineering (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter-layer time (1)
- Interoperability (1)
- Iron aluminide (1)
- Joining dissimilar materials (1)
- Joining technology (1)
- Kernel average misorientation (1)
- Keyhole collapse (1)
- Keyhole dynamics (1)
- Kitagawa-Takahashi diagram (1)
- L-PBF IN718 material (1)
- LCF (1)
- LIBS TIG welding (1)
- LMD (1)
- LTT Weld Filler Materials (1)
- LTT filler metal (1)
- LTT weld filler materials (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Lack-of-fusion (1)
- Lamé curves (1)
- Large-scale test (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Welding (1)
- Laser beam melting (1)
- Laser cutting (1)
- Laser energy absorption (1)
- Laser implantation (1)
- Laser metal deposition (LMD) (1)
- Laser powder-based directed energy deposition (1)
- Laser welding (1)
- Laser-based additive manufacturing (1)
- Laser-induced oxide layer (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Laser-plasma hybrid (1)
- Lead-free ceramics (1)
- Life cycle assessment (1)
- Lifetime (1)
- Liquid Metal Embrittlement (1)
- Liquid phase sintering (1)
- Local Weld Geometry (1)
- Local critical strain (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Localized laser dispersing (1)
- Lorentz force (1)
- Lorentz forces (1)
- Low-cycle fatigue (1)
- L‐PBF (1)
- MVT (1)
- MWIR (1)
- Machine learning (1)
- Machine vision (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Magnetic field (1)
- Martensite (1)
- Matching ferritic filler metal (1)
- Materials database (1)
- Mechanical anisotropy (1)
- Mechanical mismatching (1)
- Mechanical property (1)
- Melt pool depth (1)
- Melt pool dynamics (1)
- Metal (1)
- Metal mixing (1)
- Microalloying influences (1)
- Microbiologically influenced corrosion (1)
- Microcracking (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Mild steels (1)
- Minimum Waiting Time (1)
- Mining head gear (1)
- Misalignment of edges (1)
- Model calibration (1)
- Model order reduction (1)
- Modellierung (1)
- Modelling studies (1)
- Modification of structural morphology (1)
- Molten pool (1)
- Multi-materials joining (1)
- Multi-physical modelling (1)
- Multi-principal element alloy (1)
- Multi-principal element alloys (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- NIR (1)
- Nanotribology (1)
- Nanowear (1)
- Natural silver wires (1)
- Near-surface X-ray diffraction (1)
- Neutron Diffraction (1)
- Neutron and X-ray diffraction (1)
- Ni alloy (1)
- Ni-based austenitic filler metal (1)
- Nickel (1)
- Notch stress approach (1)
- Novel metrology (1)
- Numerical Simulation (1)
- Numerical investigation (1)
- Numerical welding simulations (1)
- Offshore steel grade (1)
- Online Process Monitoring (1)
- Online monitoring (1)
- Open science (1)
- Open source (1)
- Optical Tomography (1)
- Optical tomography (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Oxidation (1)
- PBF-LB/M (1)
- PBF-LB/M/316L (1)
- Parabolic flight (1)
- Partial penetration (1)
- Particle transfer (1)
- Path planning (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Penetration depth (1)
- Periodic solidification pattern (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Pipe weld preparation (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Polymer (1)
- Polymere (1)
- Polyurethan (1)
- Position detection (1)
- Post Weld Heat Treatment (PWHT) (1)
- Potential drop technique (1)
- Potentiodynamic measurements (1)
- Ppreheating temperature (1)
- Precipitation hardening aluminum alloys (1)
- Pressure-dependent solubility (1)
- Prevention (1)
- Probabilistic assessment (1)
- Process chain (1)
- Process simulation (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proper generalized decomposition (1)
- Properties (1)
- Prostheses (1)
- Pulsed laser beam welding (1)
- Quality monitoring (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Reactor conditions (1)
- Reference data (1)
- Reference standards (1)
- Refraction (1)
- Renewable Energy, Sustainability and the Environment (1)
- Repair welding (1)
- Repair-welding (1)
- Research data management (1)
- Residual Stresses (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Ripples (1)
- Rissbildung in Stahl (1)
- Roughness (1)
- S-N curve (1)
- S-Phase (1)
- SEM (1)
- SIMS (1)
- SLM printed plasma torch (1)
- SWIR (1)
- SWIR thermography (1)
- Sample random results (1)
- Scan strategy influence (1)
- Scanning kelvin probe force microscopy (1)
- Scattering (1)
- Schallemission (1)
- Seam geometry (1)
- Selective laser beam melting (1)
- Selektive-laser-melting (1)
- Shared infrastruture (1)
- Shear modulus (1)
- Ship building (1)
- Shipbuilding steel (1)
- Sicherheit (1)
- Single asperity (1)
- Single asperity contact (1)
- Single-pass welding (1)
- Sliding wear (1)
- Small-scale specimens (1)
- Solidification (1)
- Solubility (1)
- Spark plasma sintering (1)
- Stainless Steel (1)
- Stainless steel (1)
- Stainless steels (1)
- Staircase method (1)
- Statistical analysis (1)
- Steel and aluminium (1)
- Steelmaking slag (1)
- Stochastic sample functions (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Stress Relief Cracking (SRC) (1)
- Stress balance (1)
- Stress balance condition (1)
- Structural stress approach (1)
- Structure analysis (1)
- Sub-oxide (1)
- Supermartensitic steel (1)
- Surface Integrity (1)
- Surface preparation (1)
- Surface processing (1)
- Surface structures (1)
- Synchrotron radiation (1)
- TEKKEN (1)
- Temperature (1)
- Temperature dependence (1)
- Tensile Strength (1)
- Tensile loading (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Thermal analysis (1)
- Thermal cycles (1)
- Thermodynamic modelling (1)
- Thermodynamic simulation (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Titanium (1)
- Trapping (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tungsten carbide (WC) (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- UV-blocker addition (1)
- Ultraschall-Echoverfahren (1)
- Ultraschall-Messtechnik (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic machining (1)
- Upscaling (1)
- V-notch impact toughness (1)
- Vaporization (1)
- Varestraint testing (1)
- Verschlussbauwerk (1)
- WRC 1992 diagram (1)
- Wear particles (1)
- Weathering tests (1)
- Weld metal cracking (1)
- Weld pool (1)
- Weldability (1)
- Welded Joints (1)
- Welded joint (1)
- Welded joints (1)
- Welding Simulation (1)
- Welding simulation (1)
- Welding thermal cycle (1)
- Weldx (1)
- Werkstoffdatenbank (1)
- White light interferometry (1)
- Widerstandspunktschweißen (1)
- Wind energy (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- X-ray Diffraction (1)
- X-ray and Neutron Diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computed tomography (XCT) (1)
- X-ray refraction (1)
- Young's modulus (1)
- Zero wear (1)
- Zerstörungsfreie Prüfung (1)
- Zink (1)
- contact resonance (1)
- infrared Thermography (1)
- µ-gravity (1)
- µCT (1)
- µCT-analysis (1)
- μCT-analysis (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (215) (entfernen)
Paper des Monats
- ja (9)
Notch impact toughness of laser beam welded thick sheets of cryogenic nickel alloyed steel X8Ni9
(2020)
The paper deals with the investigations of the impact toughness of laser beam welded 14.5 mm thick sheets made of cryogenic steel X8Ni9 as a function of preheating. This 9% nickel alloyed steel is widely used in the liquefied natural gas (LNG) industry. An application of highly efficient welding processes such as high-power laser beam welding (LBW) in LNG sector requires an understanding of the interactions between the LBW process parameters and weld properties, in particular the impact toughness. The results show that the original fine-grained martensitic microstructure of the base metal (BM) is significantly changed by melting and crystallization during the LBW, what can lead to a decrease in the impact toughness of the weld metal (WM) below the required level. An optimal preheating temperature range leads to the favorable thermal welding cycle and is of remarkable importance for maintaining the notch impact toughness of laser beam welded joints of these thick steel sheets. A parameter window was identified in which V-notch impact toughness comparable to that of the BM at -196 °C was achieved.
The study deals with the application of the high-power hybrid-laser arc welding process on up to 15 mm thick pipe segments with the intention to avoid end crater imperfections during closing of the circumferential welds, where the pipes were turned during welding in 1G- and 2Gpositions.
Different techniques such as laser power ramp-down, abrupt switch-off of the laser power and change of the magnification of the laser spot diameter and defocusing of the laser beam relative to the workpiece were tested to remove the laser energy from the process. It could be shown that a high defocusing of the optic system above 40 mm with a resulting beam diameter > 2.9 mm in a short overlap length of approx.
20 mm leads to the formation of a cup-shaped weld seam, which is preferred for avoidance of cracks and pores in the end crater. A laser optics with motor-driven lens system was used for the welding experiments to defocuse the laser beam without changing the position of the arc.
The transport phenomena in the wire feed laser beam welding are investigated numerically. A three-dimensional transient heat transfer and fluid flow model coupled with free surface tracing and element transport is developed. A ray-tracing method with local grid refinement algorithm is used to calculate the multiple reflections and Fresnel absorption on the keyhole wall. The filler material flows backward along the lateral side of the weld pool, and subsequently flows forward along the longitudinal plane. The occurrence of the bulging phenomenon may further prevent the downward transfer of the additional elements to the root of the weld pool.
High Entropy Alloys (HEAs) are a recent class of materials. In contrast to conventional alloys, HEAs consist of five alloying elements in equiatomic equilibrium. The high entropy effect is due, among other things, to the increased configuration entropy, which promotes solid solution formation. Many HEAs have enormous application potential due to excellent structural property combinations from very low to high temperatures. For the introduction of HEAs in real components, however, the question of the applicability of machining production technologies for component manufacture is of central importance. This has so far received Little attention in global materials research. Reliable and safe processing is essential for the demand of economical component production for potential areas of application, e.g. in power plant technology.
For metals, milling is the standard machining process. This article presents the results of machining analyses. It focuses on the surface integrity resulting from the milling process on a Co20Cr20Fe20Mn20Ni20-HEA. For this purpose, investigations were carried out using ball nose end milling tools for conventional milling process in comparison to an innovative hybrid process available at BAM Berlin, Ultrasonic-Assisted Milling (USAM). USAM promises a lower Degradation of the surface properties due to lower loads on the workpiece surface during machining.
For this purpose, basic milling parameters (cutting speed and tooth feed) were systematically varied and cutting forces were measured during the milling experiments. The subsequent Analysis of these forces allows an understanding of the mechanical loads acting on the tool and component surface. These loads cause topographical, mechanical and microstructural influences on the surface and consequently on the surface integrity. For their characterization, light and scanning electron microscopy were used, and the roughness and residual stresses via X-ray diffraction were measured. The results indicate significant advantages using USAM, especially due to reduced cutting forces compared to the conventional milling process. This causes lower mechanical loads on the tool and surface, combined with lower tensile residual stresses on and below the surface, and ultimately results in a significantly enhanced surface integrity.
Recent studies have confirmed the widening of the weld pool interface, known as a bulge effect, during deep penetration high power laser beam welding. The link between such geometric particularities of the weld pool shape and the hot cracking phenomena is significant. The present work seeks to extend the level of understanding by investigating their relationship. A coupled multiphysics, multiscale numerical framework is developed, comprising a series of subsequent analyses. The study examines the influences of the bulge on the three most dominant effects causing hot cracking, namely the thermal cycles, the mechanical loading, and the local microstructure. The bulge in the weld pool shape forms approximately in the middle of the plate, thus correlating with the location of hot cracking. It increases the hot cracking susceptibility by enhancing the three dominant effects. The numerical results are backed up by experimental data.
The development of high energy laser sources enables single-pass welds of thick plates up to 30 mm, but often additional materials are needed to influence the properties of the weld seams. However, the homogenous distribution of filler materials in form of e.g. electrodes is only possible up to 7 mm while the elements are only traceable up to a depth of 14 mm. To overcome this problem a two-step process is used where first the edges of the weld partners are coated with the filler material by laser metal deposition (LMD) and afterwards are welded by laser beam. Single-pass welds with electromagnetic weld pool support of 30 mm thick S355 J2+N-plates with austenitic AISI 316L-coatings were investigated as well as the influence of the coatings to the penetration depth of the laser beam without electromagnetic weld pool support in double-sided joints. The weld seams were tested by X-ray inspection and cross sections.
A self-restraint hot cracking test (free edge test) was used in combination with a novel optical measurement technique to determine the critical straining conditions for solidification cracking for the stainless steel grade 1.4828 (AISI 309). The Lucas-Kanade algorithm for the optical flow (OF) calculation was implemented to obtain the full-field displacement and then the full-field strain.
The use of external laser illumination with appropriate filters allows to obtain good image quality with good contrast. The critical straining conditions required for solidification cracking can be obtained by means the proposed technique in the immediate vicinity of the solidification front. A very good repeatability was demonstrated for the used measurement technique. The critical straining conditions for solidification cracking for the tested steel und under this welding conditions has been detected
Directed energy deposition additive manufactured parts have steep stress gradients and an anisotropic microstructure caused by the rapid thermo-cycles and the layer-upon-layer manufacturing, hence heat treatment can be used to reduce the residual stresses and to restore the microstructure. The numerical simulation is a suitable tool to determine the parameters of the heat treatment process and to reduce the necessary application efforts. The heat treatment simulation calculates the distortion and residual stresses during the process. Validation experiments are necessary to verify the simulation results. This paper presents a 3D coupled thermo-mechanical model of the heat treatment of additive components. A distortion-based validation is conducted to verify the simulation results, using a C-ring shaped specimen geometry. Therefore, the C-ring samples were 3D scanned using a structured light 3D scanner to compare the distortion of the samples with different post-processing histories.
In additive manufacturing (AM) directed energy deposition (DED), parts are built by welding layers of powder or wire feedstock onto a substrate with applications for steel powders in the fields of forging tools, spare parts, and structural components for various industries. For large and bulky parts, the choice of toolpaths influences the build rate, the mechanical performance, and the distortions in a highly geometry-dependent manner. With weld-path lengths in the range of hundreds of meters, a reliable, automated tool-path generation is essential for the usability of DED processes. This contribution presents automated tool-path generation approaches and discusses the results for arbitrary geometries. Socalled “zig-zag” and “contour-parallel” processing strategies are investigated and the tool-paths are automatically formatted into machine-readable g-code for experimental validation to build sample geometries. The results are discussed in regard to volume-fill, microstructure, and porosity in dependence of the path planning according to photographs and metallographic cross-sections.
Chemical compositions of a weld can be varying locally as a result of the welding process. These local variations can be due to the vaporization of individual alloying elements. In this work, tungsten inert gas (TIG) bead-on-plate stainless steel welds of EN grade 1.4404 and 1.4435 were investigated using laser-induced breakdown spectroscopy (LIBS) on the completed welds. This study aims to reveal the welding parameters’ influence on the resulting local chemical compositions of the stainless steel welds. We demonstrated Mn vaporize before Cr due to its lower latent enthalpy of vaporization. Hence, Mn accumulates on the heat-affected zone (HAZ) both sides across the weld bead by being swept away through the circulation flow of the welding plasma. Additionally, increasing the heat input tends to enhance the accumulated Mn content on the HAZ as well as increasing the shielding gas flow rate. The results are in good agreement with the literature and proved that LIBS is an effective method to inspect completed welds.
High-entropy alloys (HEAs) are characterized by a solid solution of minimum five and medium-entropy alloys (MEAs) of minimum three principal alloying elements in equiatomic proportions. They show exceptional application properties, such as high-strength and ductility or corrosion resistance. Future HEA/MEA-components could be exposed to hydrogen containing environments like vessels for cryogenic or high-pressure storage where the hydrogen absorption and diffusion in these materials is of interest. In our study, we investigated the HEA Co20Cr20Fe20Mn20Ni20 and the MEA Co33.3Cr33.3Ni33.3. For hydrogen ingress, cathodic charging was applied and diffusion kinetic was measured by high-resolution thermal desorption spectros-copy using different heating rates up to 0.250 K/s. Peak deconvolution resulted in high-temperature desorption peaks and hydrogen trapping above 280 °C. A total hydrogen concentration > 40 ppm was identified for the MEA and > 100 ppm for HEA. This indicates two important effects: (1) delayed hydrogen diffusion and (2) considerable amount of trapped hydrogen that must be anticipated for hydrogen assisted cracking phenomenon. Local electrochemical Volta potential maps had been measured for the hydrogen free condition by means of high-resolution Scanning Kelvin Probe Force Microscopy (SKPFM).
High-strength steels with yield strength of 960 MPa are susceptible to hydrogen-assisted cracking (HAC) during welding processing. In the present paper, the implant test is used to study HAC in a quenched and tempered steel S960QL and a high-strength steel produced by thermo-mechanical controlled process S960MC. Welding is performed using the gas metal arc welding process. Furthermore, diffusible hydrogen concentration (HD) in arc weld metal is determined. Based on the implant test results, lower critical stress (LCS) for complete fracture, critical implant stress for crack initiation, and embrittlement index (EI) are determined. At HD of 1.66 ml/100 g, LCS is 605 MPa and 817 MPa for S960QL and S960MC, respectively. EI is 0.30 and 0.46 for S960QL and S960MC, respectively. Fracture surfaces of S960QL show higher degradation with reduced deformation. Both, higher EI of S960MC and fractography show better resistance to HAC in the HAZ of S960MC compared to S960QL.
A European EMPIR project, which aims to use large-scale piezoresistive microprobes for contact resonance applications, a well-established measurement mode of atomic force microscopes (AFMs), is being funded. As the probes used in this project are much larger in size than typical AFM probes some of the simplifications and assumptions made for AFM probes are not applicable. This study presents a guide on how to systematically create a model that replicates the dynamic behavior of microprobes, including air damping, nonlinear sensitivities, and frequency dependencies. The model is then verified by analyzing a series of measurements.
Solidification Cracking Assessment of LTT Filler Materials by Means of Varestraint Testing and μCT
(2020)
Investigations of the weldability of metals often deal with hot cracking, as one of the most dreaded imperfections during weld fabrication. The hot cracking investigations presented in this paper were carried out as part of a study on the development of low transformation temperature (LTT) weld filler materials. These alloys allow to mitigate tensile residual stresses that usually arise during welding using conventional weld filler materials. By this means, higher fatigue strength and higher lifetimes of the weld can be achieved. However, LTT weld filler materials are for example, high-alloyed Cr/Ni steels that are susceptible to the formation of hot cracks. To assess hot cracking, we applied the standardized modified varestraint transvarestraint hot cracking test (MVT), which is well appropriate to evaluate different base or filler materials with regard to their hot cracking susceptibility. In order to consider the complete material volume for the assessment of hot cracking, we additionally applied microfocus X-ray computer tomography (μCT). It is shown that by a suitable selection of welding and MVT parameter the analysis of the complete 3D hot crack network can provide additional information with regard to the hot cracking model following Prokhorov. It is now possible to determine easy accessible substitute values (e.g., maximum crack depth) for the extent of the Brittleness Temperature Range (BTR) and the minimum critical strain Pmin.
The accurate determination of wear volumes is a prerequisite for the study of numerous tribological phenomena. Wear volumes can be measured with different techniques or else be calculated starting from some quantities measured from the wear scar. Advantages and drawbacks of the measuring techniques are shown by means of wear scars and calottes resulting from ball-on-plane tests with 100Cr6 specimens. When measuring wear volumes, white light interferometry results to be one of the most suitable techniques. When wear volumes are calculated, errors result mainly from two sources: (1) the arbitrary choice of one or few line profiles for the determination of the width and of the planimetric wear, and (2) approximations in the calculation, which are even necessary when values of the wear volumes of the single tribological partners and not only the total volume are of interest. The effect of both error sources on the accuracy in the determination of wear volumes is characterized and elucidated by examples. It is found that errors due to approximations are negligible when compared to errors due to the arbitrary choice of one line profile.
Hydrogen-charged supermartensitic steel samples were used to systematically investigate imaging artifacts in neutron radiography. Cadmium stencils were placed around the samples to shield the scintillator from excessive neutron radiation and to investigate the influence of the backlight effect. The contribution of scattered neutrons to the total detected intensity was investigated by additionally varying the sample-detector distance and applying a functional correlation between distance and intensity. Furthermore, the influence of the surface roughness on the edge effect due to refraction was investigated.
The subject of this study is how, and to what extent, Varestraint/Transvarestraint test results are influenced by both testing parameters and characteristics of evaluation methods. Several different high-alloyed martensitic LTT (low Transformation temperature) filler materials, CrNi and CrMn type, were selected for examination due to their rather distinctive solidification cracking behaviour, which aroused interest after previous studies. First, the effects of different process parameter sets on the solidification cracking response were measured using standard approaches. Subsequently, microfocus X-ray computer tomography (μCT) scans were performed on the specimens. The results consistently show sub-surface cracking to significant yet varying extents. Different primary solidification types were found using wavelength dispersive X-ray (WDX) analysis conducted on filler metals with varying Cr/Ni equivalent ratios. This aspect is regarded as the main difference between the CrNiand CrMn-type materials in matters of cracking characteristics. Results show that when it comes to testing of modern highperformance alloys, one set of standard Varestraint testing parameters might not be equally suitable for all materials. Also, to properly accommodate different solidification types, sub-surface cracking has to be taken into account.
Laser material processing is an emerging technology that generates surface functionalities on the basis of optical, mechanical, or chemical properties. In the form of laser surface texturing (LST), it has attracted a remarkable amount of research to tailor surface properties towards various tribological applications. The main advantages of this single-step, laser-based technology are the contactless machining, featuring a high flexibility, efficiency, and speed, along with the excellent quality of the processed products. LST can be applied precisely localized to sub-micrometric areas, but, via laser beam scanning, it is also feasible for structuring large surface areas at the square meter size.
This Special Issue focuses on the latest developments concerning the tribological performance of laser-generated periodic surface nano- and microstructures and their applications. This includes the laser-based processing of different surface patterns, such as “self-organized” laser-induced periodic surface structures (LIPSS, ripples), grooves, micro-spikes, hierarchical hybrid nano-/micro-structures, microfeatures generated by direct laser interference patterning (DLIP), or even dimples or other topographic geometries shaped by direct laser modification or ablation. The applications of these periodically nano- and micro-patterned surfaces may improve the lubricated or non-lubricated tribological performance of surfaces in conformal and even non-conformal contact through a reduction of wear, a variation of the coefficient of friction, altered load carrying capacity, etc., resulting in energy saving, improved reliability, increased lifetimes as well as durability, leading in turn to extended maintenance intervals/reduced down-time. This can be beneficial in terms of bearings, gears, engines, seals, cutting tools, or other tribological components. Fundamental aspects addressed may involve the investigation of the relevant physical and chemical effects accompanying the laser-generated nano- and microscale topographies, such as alterations of the material structures, the hardness, superficial oxidation, the role of additives contained in lubricants, surface wettability, micro-hydrodynamic effects, etc.
For this Special Issue we aim to attract both academic and industrial researchers and would like to provide a bridge between research in the fields of tribology and laser material processing in order to foster the current knowledge and present new ideas for future applications and new technologies.
The avoidance of failures during the fabrication or operation of petrochemical reactors made of creep-resistant, low-alloy steels as 13CrMoV9-10 requires still research despite over 60 years of international investigations in the field of stress relief cracking. The quality of modern base materials and filler metals leads to the fact that previously known crack causes, such as impurities of S or P, recede into the background. Rather, the causes are increasingly to be found in the fabrication process. Investigations on the influence of heat control on the stresses in welded components and thus on the stress relief cracking sensitivity under realistic manufacturing conditions are not yet available. This work is subdivided in two parts. Part 1 of this study focused on the effect of heat control during submerged arc welding on the stresses. For this purpose, a testing facility was applied, which allows to observe the forces and moments accumulating during welding or heat treatment in a component-like specimen under shrinkage restraint. The stress acting in the specimen increases with higher preheat/interpass temperatures and higher heat input. During the heat treatment, the stresses are relieved. Nevertheless, cracks are formed already during heating. The total crack length correlates with the heat input.
Welding of 13CrMoV9-10 vanadium steel requires care due to an increased susceptibility to stress relief cracking during post weld heat treatment. Previous research into the crack formation in creep-resistant steels has focused on thermal and metallurgical factors; however, little knowledge has been gathered regarding the crack formation during post weld heat treatment considering real-life restraint conditions. This work is subdivided in two parts. Part I showed that an increasing heat input during submerged arc welding under restraint led to an increasing stress level in the joint prior to the post weld heat treatment. The magnitude of stress relief cracking observed in the heat-affected zone after the post weld heat treatment is affected by the heat input. In Part II of this work, the cracks and the associated microstructure which occurred under restraint were studied. The application of a Special acoustic emission analysis indicated that the cracks formed in a temperature range between 300 and 500 °C during the post weld heat treatment. The toughness in the heat-affected zone of the restrained welds was affected by the welding heat input.
Microstructural analyses of all specimens revealed accelerated aging due to precipitation of carbides during post weld heat treatment under restraint.