Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (194)
- Beitrag zu einem Tagungsband (13)
Schlagworte
- Additive manufacturing (15)
- Additive Manufacturing (12)
- Corrosion (12)
- Creep (8)
- Microstructure (8)
- Transmission electron microscopy (8)
- EBSD (7)
- Crystallization (6)
- CCS (5)
- Fatigue (5)
- Glass (5)
- High entropy alloy (5)
- Sintering (5)
- Steel (5)
- X-ray diffraction (5)
- Aging (4)
- Alumina (4)
- Carbon steel (4)
- High alloyed steel (4)
- Laser powder bed fusion (4)
- Molecular dynamics (4)
- Ontology (4)
- Raman spectroscopy (4)
- Residual stress (4)
- AISI 316L (3)
- CALPHAD (3)
- Corrosion Fatigue (3)
- Corrosion fatigue (3)
- Crystal plasticity (3)
- Electron backscatter diffraction (3)
- Electron microscopy (3)
- Glass fiber reinforced polymers (3)
- High entropy alloys (3)
- Impurities (3)
- Inconel 718 (3)
- Kikuchi patterns (3)
- Mechanical properties (3)
- Phase-field simulation (3)
- Pitting (3)
- Scanning electron microscopy (3)
- 3D printing (2)
- 3D-printing (2)
- AGIL (2)
- AISI 304L (2)
- Alkali zinc borate glasses (2)
- Binder Jetting (2)
- Bioactive glass (2)
- Bioactivity (2)
- CCUS (2)
- Carbon capture and storage (2)
- Ceramic (2)
- Ceramics (2)
- Characterization (2)
- Computed Tomography (2)
- Coulomb explosion (2)
- CrMnFeCoNi (2)
- Crop protection products (2)
- Crystal orientation (2)
- Damage (2)
- Densty-based Thermodynamics (2)
- Deuterium (2)
- Diffusion (2)
- EXAFS (2)
- Electron beam-induced fragmentation (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Finite element analysis (2)
- Foaming (2)
- Full notch creep test (FNCT) (2)
- General Materials Science (2)
- Geothermal (2)
- Glass powder (2)
- Glass transition (2)
- Grain boundaries (2)
- HIP (2)
- Heat treatment (2)
- High Alloyed Steel (2)
- High-density polyethylene (2)
- Hydrogen (2)
- Interfacial shear strength (2)
- Interphase (2)
- LPBF (2)
- Laser Powder Bed Fusion (2)
- Laser scanning microscopy (LSM) (2)
- Lattice distortion (2)
- Lattice misfit (2)
- Lattice parameters (2)
- Lead borate glasses (2)
- Lorenz transmission electron microscopy (2)
- Luftultraschall (2)
- Mechanical Engineering (2)
- Mechanics of Materials (2)
- Metallic glasses (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure Design (2)
- Nanoindentation (2)
- Native oxide (2)
- Neutron diffraction (2)
- Nickel-base superalloys (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxidation (2)
- P92 (2)
- Permeability (2)
- Plastic deformation (2)
- Plasticity (2)
- Precipitation (2)
- Quasicrystal (2)
- Reproducibility (2)
- SEM (2)
- Self-healing (2)
- Short-range order (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Solubility (2)
- Space (2)
- Steels (2)
- Stress intensity factor (2)
- Stress relaxation (2)
- Tempered martensite-ferritic steel (2)
- Tensile properties (2)
- Texture (2)
- Thermal expansion (2)
- Thermography (2)
- Ti-6Al-4V (2)
- ToF-SIMS (2)
- Transmission electron microscopy (TEM) (2)
- Vickers indentation (2)
- Viscosity (2)
- Wind turbine blades (2)
- Zirconia (2)
- 12%Cr steel (1)
- 2PP (1)
- 316L (1)
- 4-Dimensional scanning transmission (1)
- ATZ (1)
- Acid-leaching (1)
- Additive manufactured Ni-base superalloys (1)
- Advanced high strength steels (1)
- Aggressive environments (1)
- Air-coupled ultrasonic testing (1)
- Airborne ultrasonic testing (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Al2O3 (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alpha-tricalcium phosphate (1)
- Alumina toughened zirconia (1)
- Aluminosilicate glasses (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Aluminum alloys (1)
- Amorphization (1)
- Amorphous silica (1)
- Angle measurement (1)
- Approximant (1)
- Aquifer fluid (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic steel 316L (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated image analysis (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Binder jetting (1)
- Binders/binding (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioceramics (1)
- Biopolymer (1)
- Biphasic calcium phosphate (1)
- Blended learning (1)
- Bond energy (1)
- Bone regeneration (1)
- Borate (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattices (1)
- Brinell hardness (1)
- Bulk metallic glasses (1)
- CALPHAD database analysis (1)
- CFK (1)
- CO2 (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- Cabon capture and storage (1)
- Calcium alkali orthophosphate materials (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon fibres (1)
- Carbon nanotubes (1)
- Casing (1)
- Ccs (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Chrystal orientation (1)
- Co-firings (1)
- Co2-Storage (1)
- Composite (1)
- Composites (1)
- Compositionally complex alloys (1)
- Concrete 3D-printing (1)
- Condensate (1)
- Confined catalyst (1)
- Corrosion costs (1)
- Corrosion mechanism (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- CrCoNi (1)
- Crack evolution (1)
- Crack healing (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Critical energy release rate (1)
- Cross linking (1)
- Cross-sectioning (1)
- Crystal growth (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Cure process (1)
- Cuttlefish (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- DCB geometry (1)
- Data Interoperability (1)
- Data analysis (1)
- Data infrastructures (1)
- Data mapping (1)
- Data processing (1)
- Debinding (1)
- Debonding (1)
- Defects (1)
- Degradation (1)
- Density-based Model (1)
- Dentine (1)
- Design of experiment (1)
- Desorption (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffusivity (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Directional grain growth (1)
- Dislocation (1)
- Disorientation (1)
- Diversity (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Drywood termite (1)
- Dwell periods (1)
- Dwell times (1)
- Dynamic mechanical analysis (DMA) (1)
- EFTEM (1)
- EN AW-2618A (1)
- Early oxidation (1)
- Early sulfidation (1)
- Elastic constants (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elasticity (1)
- Electric conductivity (1)
- Electrical insulators (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Electron beam-induced charging (1)
- Electronic (1)
- Enamel (1)
- Endurance Limit (1)
- Epoxy (1)
- Equilibrium relaxation (1)
- Eutectic (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR research data management (1)
- FSDC (1)
- Failure mechanisms (1)
- Fatigue damage (1)
- Fatigue of sandwich shell structures (1)
- Femtosecond laser (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferroelectret (1)
- Ferroelektret (1)
- Ferrous phosphate hydrate (1)
- Fiber reinforced polymer (1)
- Firing (1)
- First derivative (1)
- Fracture (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Fragility (1)
- Fresnoite (1)
- Friction (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Fullerite (1)
- Functional fatigue (1)
- GFRP (1)
- Gas flow assisted powder deposition (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- Geometrical factors (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Gnomonic projections (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary engineering (1)
- Grain boundary precipitates (1)
- Grain growth (1)
- Grain structure (1)
- Granules (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- Hausner ratio (1)
- Heat accumulation (1)
- High - temperature (1)
- High Cycle Fatigue (1)
- High Entropy Alloys (1)
- High density polyethylene (1)
- High temperature corrosion (1)
- High temperature oxidation (1)
- High-Entropy Alloys (1)
- High-temperature corrosion (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Homogenization (1)
- Hot pressing (1)
- Hybrid Manufacturing (1)
- Hydrogel (1)
- Hydrogen permeation (1)
- Hydrogen storage tank (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- IN 718 (1)
- IR spectroscopy (1)
- ISRU (1)
- In situ tensile test (1)
- In-situ ED-XRD (1)
- In-situ SEM micro shear deformation (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Infrared spectroscopy (1)
- Inkjet (1)
- Inter layer time (1)
- Interface (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial strength (1)
- Interlaboratory comparability (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal friction (1)
- Internal stresses (1)
- Intrinsic stress (1)
- Invar (1)
- Inverted classroom (1)
- Ionic porosity (1)
- Iron (1)
- Irradiation (1)
- JMAK model (1)
- KCl (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Kikuchi diffraction (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Laminographie (1)
- Laminography (1)
- Laser (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser beam melting (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser powder-based directed energy deposition (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Laves phase (1)
- Layered manganese oxide (1)
- Layerwise Slurry Deposition (1)
- Layerwise slurry deposition (1)
- Lecture films (1)
- Light curing (1)
- Lightweight materials (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Long-term aging (1)
- Low cycle fatigue (1)
- Low-cycle fatigue (1)
- Low-loading (1)
- Lunar regolith (1)
- MOUSE (1)
- Machine learning (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Martensite (1)
- Martensitic steels (1)
- Materials Chemistry (1)
- Materials Modelling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Medium entropy alloys (1)
- Melt pool boundary (1)
- Meta material (1)
- Metal additive manufacturing (1)
- Metal magnetic memory (1)
- Metallic Glass (1)
- Metallic materials (1)
- Metals and Alloys (1)
- Methodology (1)
- Microhardness (1)
- Microplastic stress (1)
- Microstructure evolution (1)
- Milling (1)
- Misfitting precipitate (1)
- Mixed conductors (1)
- Mn-oxides (1)
- Model (1)
- Molecular Dynamics (1)
- Moon (1)
- Multiaxial deformation (1)
- Multilayers (1)
- NMR spectroscopy (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-powder (1)
- NanoCAM (1)
- Nanocomposites (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterials (1)
- Nanoparticles (1)
- Nanopowder (1)
- Nanostructure quantification (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Neutron Diffraction (1)
- Ni-Mn-Ga (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Non-destructive testing (1)
- Non-serrated inhomogeneous flow (1)
- Notch (1)
- Nucleation (1)
- Nucleation tendency (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Ontologies (1)
- Optical and Magnetic Materials (1)
- Optical criterion of brittleness (1)
- Ordered/disordered structures (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxyfuel (1)
- Oxygen evolution reaction (1)
- PBF-LB/M/316L (1)
- Packaging (1)
- Parabolic flight (1)
- Particle-bed binder jetting (1)
- Pattern matching (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase transformation (1)
- Phase transformations (1)
- Phase-Field Simulations (1)
- Phase-field modelling (1)
- Photon counting detector (1)
- Physical aging (1)
- Physical properties (1)
- Phytolith (1)
- Pipeline (1)
- Pipeline network (1)
- Pitting corrosion (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Polyethylene (1)
- Polymer (1)
- Polymer composite (1)
- Polymer matrix composites (1)
- Polymer-ceramic mixtures (1)
- Polyolefins (1)
- Porous materials (1)
- Portfolio (1)
- Positron annihilation spectroscopy (1)
- Powder bed density (1)
- Powder diffraction (1)
- Powder processing (1)
- Powder-based processes (1)
- Precipitate shape (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Principal stress components (1)
- Printing (1)
- Process (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Pseudosymmetry (1)
- Pull-out composite materials (1)
- Rapid solidification (1)
- Recommendations (1)
- Reference data (1)
- Refractory alloy (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Relaxation fatigue (1)
- Repair patch (1)
- Residual Stress (1)
- Residual Stresses (1)
- Residual strains (1)
- Resistance spot welding (1)
- Resistance stress (1)
- Rissentwicklung (1)
- Rotor blade (1)
- Rotorblatt (1)
- Rotorblattschalen (1)
- Roughness (1)
- Round Robin (1)
- Röntgen-Refraktion (1)
- S-Phase (1)
- S-phase (1)
- SDC (1)
- SEM micrography (1)
- SO2 (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sample preparation (1)
- Sandwich (1)
- Scaffold (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scarf joint (1)
- Scarf repairs (1)
- Scavenging effect of iron (1)
- Schalenprüfstand (1)
- SchwarzP cells (1)
- Segregation Engineering (1)
- Selective Laser Melting (1)
- Selective laser melting (SLM) (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Shape memory alloy (1)
- Shape-memory alloys (1)
- Shear load (1)
- Shear modulus (1)
- Shear testing (1)
- Shear thinning (1)
- Short-beam strength (1)
- Silicate glass-ceramics (1)
- Silicon release (1)
- Silver metallization paste (1)
- Single crystal (1)
- Single crystal Ni-Base superalloys (1)
- Single-Crystal (1)
- Single-crystals (1)
- Sinter retardation (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Sliding simulation (1)
- Slip localization (1)
- Slow crack growth (1)
- Slow crack growth (SCG) (1)
- Slurry (1)
- Small-angle scattering (1)
- Smart materials (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Softening temperature (1)
- Specimen geometry (1)
- Spray drying (1)
- Stable crack growth (1)
- Steel alloy (1)
- Strain difference (1)
- Stress corrosion cracking (1)
- Stress distribution (1)
- Structural steel (1)
- Sulfiding (1)
- Superalloy single crystals (1)
- Superalloys (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Supersaturation (1)
- Surface (1)
- Surface crystallization (1)
- Surface elasticity (1)
- Surface roughness (1)
- Surface stress (1)
- Surface treatments (1)
- Surface-induced Melting (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synchrotronstrahlung (1)
- Synthesis (1)
- T1 precipitate (1)
- TEM (1)
- Temperature (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile strength (1)
- Tensile testing (1)
- Thermal Cycling (1)
- Thermo-mechanics (1)
- Thermobimetal (1)
- Thermodynamics (1)
- Thermoelectric properties (1)
- Thermographie (1)
- Thermoplastic (1)
- Thermoset polymers (1)
- Thickening (1)
- Thin tribofilm (1)
- Three-dimensional tomographies (1)
- Titanium (1)
- Tooth wear (1)
- Topography (1)
- Transducers (1)
- Transmission Kikuchi diffraction (1)
- Transparency (1)
- Transparent ceramic (1)
- Triply Periodical Minimal Surface (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Two-photon-polymerization (1)
- UV-irradiation (1)
- Ultrasound (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volume changes (1)
- Volume fraction (1)
- Wandler (1)
- Water Diffusion (1)
- Water content (1)
- Water in glass (1)
- Water speciation (1)
- Wetting (1)
- Whole-chain CCS scenario (1)
- Wind energy (1)
- Wind turbine (1)
- Windkraft (1)
- Work of adhesion (1)
- X-ray Diffraction (1)
- X-ray absorption spectroscopy (1)
- X-ray computed tomography (CT) (1)
- X-ray laminography (1)
- X-ray refraction (1)
- X-ray tomographic (1)
- XPCS (1)
- Young's modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- corrosion (1)
- electron microscopy (1)
- high entropy alloys (1)
- hydrogen storage (1)
- microstructural changes (1)
- oxidation (1)
- scanning electron microscopy (1)
- sulfidation (1)
- µ-gravity (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (207) (entfernen)
Paper des Monats
- ja (7)
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
The present work addresses powder bed binder jetting additive manufacturing by selective magnesium phosphate cement activation. Despite the potential of this technology to aid the digitalization of the construction industry, the effect of processing parameters on the mechanical performance of printed materials has not yet been studied to generate a guideline for the further development of the technology. Statistical methodologies were used to screen the effect of four printing process parameters (printing speed, layer thickness, raster angle, and build direction on flexural and compressive strength). As the exploited technology works with constant fluid pressure, the physical interpretation of the effect of each factor can be considered taking into account the interactions between the binder materials in the powder bed. Analysis of variance (ANOVA) indicated that printing speed and layer thickness significantly affect mechanical performances. Furthermore, the layout of samples for the printing process is preferable to be parallel the printhead movement. An anisotropic behavior was observed, and the samples subjected to compressive forces parallel to the layer plane possessed lower strength values. This effect can be interpreted as a result of a weak area of low density in between layers, leading to a pronounced delamination under compression. Even though the strength of the printed material is not suitable for a structural concrete, it can be marginally improved by design of experiment and optimized for non-structural applications, such as for porous artificial stone. Design of experiment coupled with ANOVA methods can be used in the future to support the development of novel material mixtures, thus expanding the fields of application of this novel additive manufacturing technology.
A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO.
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.
High‐temperature KCl‐induced corrosion of high Cr and Ni alloys investigated by in‐situ diffraction
(2024)
High‐temperature KCl‐induced corrosion in laboratory air was observed in situ utilizing X‐ray diffraction. High Cr‐containing model alloys (Fe‐13Cr, Fe‐18Cr‐12Ni, and Fe‐25Cr‐20Ni) were coated with KCl and exposed to dry air at 560°C. KCl‐free alloys were studied in the equivalent atmosphere as a reference. After exposure to KCl‐free environments, all alloys showed the formation of very thin oxide layers, indicating good corrosion resistance. In contrast, KCl‐bearing alloys showed distinct damage after exposure.
Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
Additive manufacturing of metals – and in particular building with laser-based powder bed fusion – is highly flexible and allows high-resolution features and feedstock savings. Meanwhile, though space stations in low Earth orbit are established, a set of visits to the Moon have been performed, and humankind can send out rovers to explore Venus and Mars, none of these milestone missions is equipped with technology to manufacture functional metallic parts or tools in space. In order to advance space exploration to long-term missions beyond low Earth orbit, it will be crucial to develop and employ technology for in-space manufacturing (ISM) and in-situ resource utilisation (ISRU). To use the advantages of laser-based powder bed fusion in these endeavours, the challenge of powder handling in microgravity must be met. Here we present a device capable of building parts using metallic powders in microgravity. This was proven on several sounding rocket flights, on which occasions Zr-based metallic glass parts produced by additive manufacturing in space were built. The findings of this work demonstrate that building parts using powder feedstock, which is more compact to transport into space than wire, is possible in microgravity environments. This thus significantly advances ISRU and ISM and paves the way for future tests in prolonged microgravity settings.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as “electron beam-induced fragmentation” or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field B = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. B = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as ‘‘electron beam-induced fragmentation’’ or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field 𝐵 = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. 𝐵 = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
Processing and cytocompatibility of Cu-doped and undoped fluoride-containing bioactive glasses
(2024)
Sintered or additive-manufactured bioactive glass (BG) scaffolds are highly interesting for bone replacement applications. However, crystallization often limits the high-temperature processability of bioactive glasses (BGs). Thus, the BG composition must combine high bioactivity and processability. In this study, three BGs with nominal molar (%) compositions 54.6SiO2-1.7P2O3-22.1CaO-6.0Na2O-7.9K2O-7.7MgO (13–93), 44.8SiO2-2.5P2O3-36.5CaO-6.6Na2O-6.6K2O-3.0CaF2 (F3) and 44.8SiO2-2.5P2O3-35.5CaO-6.6Na2O-6.6K2O-3.0CaF2-1.0CuO (F3–Cu) were investigated. The dissolution and ion release kinetics were investigated on milled glass powder and crystallized particles (500–600 μm). All glasses showed the precipitation of hydroxyapatite (HAp) crystals after 7 days of immersion in simulated body fluid. No significant differences in ion release from glass and crystalline samples were detected. The influence of surface roughness on cytocompatibility and growth of preosteoblast cells (MC3T3-E1) was investigated on sintered and polished BG pellets. Results showed that sintered BG pellets were cytocompatible, and cells were seen to be well attached and spread on the surface after 5 days of incubation. The results showed an inverse relation of cell viability with the surface roughness of pellets, and cells were seen to attach and spread along the direction of scratches.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Thermoelectric generators are very attractive devices for waste heat energy harvesting as they transform a temperature difference into electrical power. However, commercially available generators show poor power density and limited operation temperatures. Research focuses on high‐temperature materials and innovative generator designs. Finding the optimal design for a given material system is challenging. Here, a theoretical framework is provided that allows appropriate generator design selection based on the particular material properties. For high‐temperature thermoelectric oxides, it can be clearly deduced that unileg multilayer generators have the highest potential for effective energy harvesting. Based on these considerations, prototype unileg multilayer generators from the currently best thermoelectric oxide Ca3Co4O9 are manufactured for the first time by industrially established ceramic multilayer technology. These generators exhibit a power density of 2.2 mW/cm² at a temperature difference of 260 K, matching simulated values and confirming the suitability of the technology. Further design improvements increase the power density by a factor of 22 to facilitate practicable power output at temperature differences as low as 7 K. This work demonstrates that reasonable energy harvesting at elevated temperatures is possible with oxide materials and appropriate multilayer design.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
Irradiation assisted stress corrosion cracking (IASCC) is a form of intergranular stress corrosion cracking that occurs in irradiated austenitic alloys. It requires an irradiated microstructure along with high temperature water and stress. The process is ubiquitous in that it occurs in a wide range of austenitic alloys and water chemistries, but only when the alloy is irradiated. Despite evidence of this degradation mode that dates back to the 1960s, the mechanism by which it occurs has remained elusive. Here, using high resolution electron backscattering detection to analyze local stress-strain states, high resolution transmission electron microscopy to identify grain boundary phases at crack tips, and decoupling the roles of stress and grain boundary oxidation, we are able to unfold the complexities of the phenomenon to reveal the mechanism by which IASCC occurs. The significance of the findings impacts the mechanical integrity of core components of both current and advanced nuclear reactor designs worldwide.
In the past two decades, numerous relaxation or physical aging experiments of metallic glasses have revealed signatures of intermittent atomic-scale processes. Revealed via intensity cross-correlations from coherent scattering using X-ray photon correlation spectroscopy (XPCS), the observed abrupt changes in the time-domain of atomic motion does not fit the picture of gradual slowing down of relaxation times and their origin continues to remain unclear. Using a binary Lennard-Jones model glass subjected to microsecond-long isotherms, we show here that temporally and spatially heterogeneous atomic-cluster activity at different length-scales drive the emergence of highly non-monotonous intensity cross-correlations. The simulated XPCS experiments reveal a variety of time-dependent intensity-cross correlations that, depending on both the structural evolution and the 𝑞-space sampling, give detailed insights into the possible structural origins of intermittent aging measured with XPCS.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.