Wissenschaftliche Artikel der BAM
Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (2065) (entfernen)
Sprache
- Englisch (2022)
- Deutsch (40)
- Mehrsprachig (2)
- Portugiesisch (1)
Schlagworte
- Additive manufacturing (64)
- Fluorescence (55)
- SAXS (46)
- Nanoparticles (45)
- Concrete (37)
- MALDI-TOF MS (36)
- Quantum yield (36)
- Corrosion (35)
- Mechanochemistry (29)
- Polylactide (28)
- Ultrasound (28)
- Laser beam welding (26)
- Microstructure (25)
- Nanoparticle (24)
- Raman spectroscopy (24)
- Sensor (24)
- Lifetime (23)
- Mechanical properties (23)
- Non-destructive testing (23)
- Quality assurance (23)
- Small-angle X-ray scattering (23)
- Laser-induced periodic surface structures (LIPSS) (22)
- Additive Manufacturing (21)
- Synthesis (21)
- Dye (20)
- Photophysics (18)
- Imaging (17)
- Machine learning (17)
- Nano (17)
- Computed tomography (16)
- Laser powder bed fusion (16)
- Residual stress (16)
- Reference material (15)
- Thermography (15)
- XPS (15)
- Cancer (14)
- Electrochemistry (14)
- Hydrogen (14)
- Mass spectrometry (14)
- Nanomaterial (14)
- Simulation (14)
- Steel (14)
- Structural health monitoring (14)
- Alkali-activated materials (13)
- Catalysis (13)
- Crystallization (13)
- Fatigue (13)
- NIR (13)
- Photoluminescence (13)
- Scattering (13)
- X-ray computed tomography (13)
- Immunoassay (12)
- LIBS (12)
- Magnetic resonance imaging (12)
- Monitoring (12)
- Polymer (12)
- Polymers (12)
- Welding (12)
- AFM (11)
- Ectoine (11)
- ICP-MS (11)
- In situ (11)
- Leaching (11)
- Luminescence (11)
- Soil (11)
- X-ray diffraction (11)
- X-ray scattering (11)
- Creep (10)
- DNA (10)
- Electron microscopy (10)
- Flame retardant (10)
- Graphene (10)
- Lanthanide (10)
- Microscopy (10)
- NDT (10)
- Residual stresses (10)
- Aging (9)
- Biocides (9)
- Circular economy (9)
- EBSD (9)
- Femtosecond laser (9)
- Friction (9)
- Laser ablation (9)
- Mechanism (9)
- Method (9)
- Particle (9)
- Quantum dots (9)
- Solidification cracking (9)
- Spectroscopy (9)
- Ti-6Al-4V (9)
- Tomography (9)
- X-ray photoelectron spectroscopy (9)
- XRD (9)
- Bacteria (8)
- Cement (8)
- Cracks (8)
- Degradation (8)
- Distributed acoustic sensing (8)
- Heat treatment (8)
- High entropy alloy (8)
- Microplastics (8)
- Moisture (8)
- Molecularly imprinted polymers (8)
- Nanomaterials (8)
- Phosphorus (8)
- Process monitoring (8)
- Quantification (8)
- Radiation protection (8)
- Reliability (8)
- Reproducibility (8)
- Synchrotron (8)
- Transmission electron microscopy (8)
- Wear (8)
- Air-coupled ultrasound (7)
- Atomic force microscopy (7)
- Bottom ash (7)
- DNA origami (7)
- Durability (7)
- ELISA (7)
- Energy transfer (7)
- Evolution (7)
- Interlaboratory comparison (7)
- MRI (7)
- Mechanical Engineering (7)
- Metals and Alloys (7)
- Metrology (7)
- Nanocomposite (7)
- Neutron diffraction (7)
- Neutron imaging (7)
- Raman (7)
- Reference materials (7)
- SEM (7)
- Sintering (7)
- Standards (7)
- Surface chemistry (7)
- Traceability (7)
- Tribology (7)
- Ultrasonic-assisted milling (7)
- XANES (7)
- Affinity chromatography (6)
- Antimicrobial resistance (6)
- Automation (6)
- Biofilm (6)
- Biofilms (6)
- Biomaterials (6)
- CCS (6)
- Calibration (6)
- Characterization (6)
- Coda wave interferometry (6)
- Construction products (6)
- Contrast agent (6)
- Cyclization (6)
- DNA radiation damage (6)
- Density functional theory (6)
- Distributed fiber optic sensing (6)
- EXAFS (6)
- FTIR (6)
- Fiber optics sensors (6)
- Gadolinium (6)
- General Chemistry (6)
- Glass (6)
- Ground vibration (6)
- High-strength steel (6)
- Iron (6)
- Laser metal deposition (6)
- Lithium-ion battery (6)
- MOF (6)
- MOUSE (6)
- Mass Spectrometry (6)
- Microplastic (6)
- Multiplexing (6)
- Mycotoxins (6)
- NEXAFS (6)
- Optical probe (6)
- Oxidation (6)
- PH (6)
- Phase transformation (6)
- Porosity (6)
- Radiography (6)
- Resistance spot welding (6)
- Software (6)
- Structural Health Monitoring (6)
- Struvite (6)
- Surface functionalization (6)
- Synchrotron X-ray diffraction (6)
- Synchrotron radiation (6)
- TED-GC/MS (6)
- TIG welding (6)
- Upconversion nanoparticle (6)
- XRF (6)
- 3D printing (5)
- Analytical Chemistry (5)
- Antikörper (5)
- Artificial neural networks (5)
- BAMline (5)
- Bioinformatics (5)
- Bridge (5)
- Carbon steel (5)
- Catalyst (5)
- Coating (5)
- Composites (5)
- Cone calorimeter (5)
- Core-shell particles (5)
- Corrosion resistance (5)
- Cr(III) (5)
- Creep-resistant steel (5)
- DFT (5)
- Dangerous goods packagings (5)
- Diffraction (5)
- Diffusion (5)
- Dosimetry (5)
- Fatigue strength (5)
- Flow cytometry (5)
- General Materials Science (5)
- Gold (5)
- Graphene oxide (5)
- ICP-OES (5)
- Industry 4.0 (5)
- Infrared thermography (5)
- Iron oxide (5)
- L-PBF (5)
- LA-ICP-MS (5)
- Laser processing (5)
- Ligand (5)
- Low energy electrons (5)
- MIC (5)
- Material moisture (5)
- Mechanics of Materials (5)
- Metabolomics (5)
- Microcracking (5)
- Molecular dynamics (5)
- NMR (5)
- Nitrotyrosine (5)
- Numerical simulation (5)
- Polycondensation (5)
- Polyethylene (5)
- Polymerization (5)
- Porous materials (5)
- Radar (5)
- Radiation damage (5)
- Ring-expansion polymerization (5)
- Ring-opening polymerization (5)
- SWIR (5)
- Sewage sludge (5)
- Silver nanoparticles (5)
- Single particle (5)
- Stainless steel (5)
- Standardization (5)
- Surface integrity (5)
- Texture (5)
- Thermal runaway (5)
- Thick-walled steel (5)
- Toxicity (5)
- Tyrosine (5)
- Validation (5)
- X-ray refraction (5)
- AISI 316L (4)
- Aggregation (4)
- Air pollution (4)
- Alumina (4)
- Antibiotics (4)
- Archaeometry (4)
- Artificial neural network (4)
- BODIPY (4)
- Brightness (4)
- Carbon dioxide (4)
- Carbon nanotubes (4)
- Civil engineering (4)
- Classification (4)
- Complex (4)
- Compressive strength (4)
- Computed Tomography (4)
- Corrosion fatigue (4)
- Crack (4)
- Crystalinity (4)
- DAS (4)
- Damage (4)
- Damage detection (4)
- Data fusion (4)
- Data processing (4)
- Deep learning (4)
- Defect detection (4)
- Defects (4)
- Diffusible hydrogen (4)
- Digital image correlation (4)
- Digitalization (4)
- Distributed fiber sensing (4)
- Distributed vibration sensing (4)
- Ectoin (4)
- Electron backscatter diffraction (4)
- Environmental Chemistry (4)
- Escherichia coli (4)
- Fertilizer (4)
- Finite element analysis (4)
- Finite element method (4)
- Food (4)
- Fungi (4)
- Gas chromatography (4)
- Geant4 (4)
- General Medicine (4)
- Geosynthetics (4)
- HPLC (4)
- Halomonas elongata (4)
- Hardness (4)
- Heat accumulation (4)
- High alloyed steel (4)
- Hybrid laser arc welding (4)
- Hybrid laser-arc welding (4)
- Hydrolysis (4)
- Hyperbranched (4)
- IgG (4)
- In situ measurement (4)
- In situ monitoring (4)
- Inconel 718 (4)
- Industrial and Manufacturing Engineering (4)
- Isotope ratio (4)
- Kinetics (4)
- LC-MS/MS (4)
- Lab-on-a-chip (4)
- Laser Powder Bed Fusion (4)
- MALDI TOF MS (4)
- Machine Learning (4)
- Materials Chemistry (4)
- Measurement uncertainty (4)
- Medium entropy alloy (4)
- Metaproteomics (4)
- Microdosimetry (4)
- Model updating (4)
- Modelling (4)
- Mycotoxin (4)
- Nanocomposites (4)
- Nanostructures (4)
- Neutron scattering (4)
- Nickel (4)
- Nitration (4)
- Nondestructive testing (4)
- Numerical modeling (4)
- Ontology (4)
- Oxygen evolution reaction (4)
- PFAS (4)
- Plastic deformation (4)
- Pollen (4)
- Pollution (4)
- Polyglycerol (4)
- Protein (4)
- Quality control (4)
- Quantitative spectroscopy (4)
- Radical scavenger (4)
- Raman microspectroscopy (4)
- Recycling (4)
- Regulation (4)
- Reinforced concrete (4)
- Residual Stress (4)
- Rheology (4)
- Rubber (4)
- SERS (4)
- Sample preparation (4)
- Scanning electron microscopy (4)
- Selective laser melting (SLM) (4)
- Signal enhancement (4)
- Signal processing (4)
- Small-angle scattering (4)
- Standardisation (4)
- Stress relief cracking (4)
- Surface (4)
- Synergy (4)
- Termites (4)
- Thin films (4)
- Titanium dioxide (4)
- ToF-SIMS (4)
- UV radiation (4)
- Ultrashort laser pulses (4)
- Ultrasonic testing (4)
- Upconversion (4)
- VOC (4)
- Virulence (4)
- Zerstörungsfreie Prüfung (4)
- 316L (3)
- AGIL (3)
- Acid resistance (3)
- Adsorption (3)
- Advanced materials (3)
- Ageing (3)
- Allergy (3)
- Alloy 36 (3)
- Aluminium (3)
- Amino acid analysis (3)
- Amyloid (3)
- Analytical methods (3)
- Antibody (3)
- Artificial Intelligence (3)
- Bead (3)
- Benchmarking (3)
- Binder Jetting (3)
- Biosensing (3)
- Bisphenol A (3)
- Boehmite (3)
- Brain (3)
- Building and Construction (3)
- Building materials (3)
- C-F bond activation (3)
- C-OTDR (3)
- CALPHAD (3)
- Carbon (3)
- Cement hydration (3)
- Ceramic (3)
- Ceramics (3)
- Ceramics and Composites (3)
- Certification (3)
- Chemical analysis (3)
- Chromatography (3)
- Cocrystal (3)
- Compatible solute (3)
- Composite (3)
- Compression set (3)
- Condensed Matter Physics (3)
- Copper (3)
- Core-shell (3)
- Corrosion Fatigue (3)
- Corrosion testing (3)
- Crack evolution (3)
- Crack propagation (3)
- Cracking (3)
- Crystal (3)
- Crystal plasticity (3)
- Crystals (3)
- Cytotoxicity (3)
- DED (3)
- DFG SPP 2005 (3)
- DNA damage (3)
- Debye–Waller factor (3)
- Deep penetration (3)
- Diagnostics (3)
- Differential scanning calorimetry (3)
- Digital detector array (DDA) (3)
- Direct laser writing (3)
- Disinfection (3)
- Distributed sensing (3)
- Double-strand break (DSB) (3)
- Duplex stainless steels (3)
- EPDM (3)
- Ecology (3)
- Electrocatalysis (3)
- Embedded sensors (3)
- Emission test chamber (3)
- Energetic materials (3)
- Energy label (3)
- Epoxy (3)
- Ergot alkaloids (3)
- Excitation power density (3)
- Extracellular matrix (3)
- FAIR (3)
- FEM (3)
- FRET (3)
- Fatigue crack propagation threshold (3)
- Fe-N-C catalysts (3)
- Fire (3)
- Fire protection (3)
- Fire resistance (3)
- Fire test (3)
- Flame retardancy (3)
- Flame retardants (3)
- Flexible crystals (3)
- Fluidics (3)
- Fluoride (3)
- Food analysis (3)
- Fracture mechanics (3)
- Fuel cells (3)
- Gadofosveset (3)
- Geant4-DNA (3)
- Geotextiles (3)
- Giant magnetoresistance (3)
- HRMS (3)
- Hausner ratio (3)
- High entropy alloys (3)
- High temperature (3)
- High-density polyethylene (3)
- High-entropy alloys (3)
- High-resolution mass spectrometry (3)
- High-throughput (3)
- Human serum (3)
- Hydration (3)
- Hydrogen embrittlement (3)
- Hydroxyectoine (3)
- Impurities (3)
- Infrared spectroscopy (3)
- Inspection (3)
- Intermodulation AFM (3)
- Internal defects (3)
- Interphase (3)
- Isotope dilution (3)
- Kikuchi patterns (3)
- Lamb waves (3)
- Lanthanides (3)
- Laser powder bed fusion (L-PBF) (3)
- Laser thermography (3)
- Laser-induced X-ray emission (3)
- Liquid metal embrittlement (3)
- Lithium (3)
- MALDI (3)
- Magnetic nanoparticles (3)
- Mass Spectroscopy (3)
- Metal phosphonate (3)
- Method development (3)
- Methodology (3)
- Micro-computed tomography (3)
- Microbiologically influenced corrosion (3)
- Microfluidics (3)
- Microwave (3)
- Modeling (3)
- Moisture transport (3)
- Molecular imaging (3)
- Molecular imprinting (3)
- Monoclonal antibody (3)
- Multiple crack propagation (3)
- NAP-XPS (3)
- NMR relaxometry (3)
- Nanopartikel (3)
- Nanoplastics (3)
- Nanostructure (3)
- Nanotechnology (3)
- Neutron tomography (3)
- Niobium carbide (3)
- Nucleation (3)
- Numerical modelling (3)
- Optical spectroscopy (3)
- Osmoadaptation (3)
- Oxygen reduction reaction (3)
- Ozone (3)
- PCA (3)
- PMMA (3)
- Papyrus (3)
- Peptide (3)
- Peptides (3)
- Permeability (3)
- Phase distribution (3)
- Phase-field simulation (3)
- Phenylalanine (3)
- Phonons (3)
- Photocatalysis (3)
- Pitting (3)
- Polycarbonate (3)
- Polyglycolide (3)
- Polyurethane (3)
- Post weld heat treatment (3)
- Post-weld heat treatment (3)
- Precipitation (3)
- Process Analytical Technology (3)
- Process Industry (3)
- Proper generalized decomposition (3)
- Protein A (3)
- Prozessanalytik (3)
- Pseudomonas aeruginosa (3)
- Reconstruction algorithm (3)
- Reference Material (3)
- Resource efficiency (3)
- Roughness (3)
- SSB (3)
- Safety characteristics (3)
- Screening (3)
- Self-assembly (3)
- Sensitization (3)
- Sensors (3)
- Shape memory polymer (3)
- Sift-proofness (3)
- Single particle ICP-MS (3)
- Single-strand break (SSB) (3)
- Small-angle x-ray scattering (3)
- Smart structures (3)
- Solid state NMR (3)
- Solubility (3)
- Spalling (3)
- Strength (3)
- Stress relaxation (3)
- Submerged arc welding (3)
- Super resolution (3)
- Surfaces, Coatings and Films (3)
- Sustainability (3)
- Switch (3)
- TEM (3)
- Temperature (3)
- Tensile properties (3)
- Termite (3)
- Teststreifen (3)
- Thermal desorption (3)
- Thermal expansion (3)
- Thermodynamics (3)
- Thermoelectrics (3)
- Thermoplastics (3)
- Topas (3)
- Toxicology (3)
- Transcriptomics (3)
- Transesterification (3)
- Transformation products (3)
- UL 94 (3)
- Ultrashort pulsed laser (3)
- Uncertainty (3)
- Upscaling (3)
- Value of information (3)
- Varestraint test (3)
- Viscosity (3)
- Volatile organic compounds (3)
- WAAM (3)
- Weathering (3)
- Weld pool shape (3)
- Wood Protection (3)
- X-ray imaging (3)
- XANES spectroscopy (3)
- XAS (3)
- XCT (3)
- Zinc (3)
- Zirconia (3)
- 2PP (2)
- 3D-printing (2)
- AAA (2)
- AAS (2)
- AISI 304L (2)
- Ab initio (2)
- Absolute isotope ratio (2)
- Accelerated testing (2)
- Acoustic emission (2)
- Acoustic sensing (2)
- Acoustic-flow interaction (2)
- Active thermal imaging (2)
- Additive manufacturing (AM) (2)
- Advanced high strength steels (2)
- Aeroacoustics (2)
- Affinitätschromatographie (2)
- Aggregation induced emission (2)
- Air sampling (2)
- Algorithms (2)
- Alkali silica reaction (2)
- Alkali zinc borate glasses (2)
- Alloy modification (2)
- Aluminum alloys (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Amorphization (2)
- Amorphous carbon (2)
- Amoxicillin (2)
- Amperometry (2)
- Amphiphilicity (2)
- Analysis (2)
- Angle of repose (2)
- Anode (2)
- Anodization (2)
- Aqueous solution (2)
- Aromatic amino acid analysis (2)
- Artificial ageing (2)
- Artificial intelligence (2)
- Assay (2)
- Assessment (2)
- Atherosclerosis (2)
- Atmospheric boundary layer (2)
- Atomic weight (2)
- Atomistic models (2)
- Au (2)
- AuNP (2)
- Austenite-to-martensite transformation (2)
- Automated image analysis (2)
- Automated synthesis (2)
- Axial force (2)
- BESSY (2)
- BOFDA (2)
- Bacterial attachment (2)
- Ball milling (2)
- Barcoding (2)
- Base damage (2)
- Base loss (2)
- Bassanite (2)
- Bauprodukte (2)
- Baustoffrecycling (2)
- Bead-based assay (2)
- Behavior and Systematics (2)
- Benz[a]anthracene (BaA) (2)
- Benzo[a]pyrene (BaP) (2)
- Beta decay (2)
- Betatron (2)
- Beton (2)
- Bio-SAXS (2)
- Bio-weathering (2)
- Bioactive glass (2)
- Bioactivity (2)
- Bioceramics (2)
- Biochemistry (2)
- Bioconjugation (2)
- Biodeterioration (2)
- Biodiesel (2)
- Biomarker (2)
- Biosensor (2)
- Biotechnology (2)
- Biotests (2)
- Bismuth (2)
- Black fungi (2)
- Black yeast (2)
- Bonding Analysis (2)
- Borehole (2)
- Brachytherapy (2)
- Bragg-edge imaging (2)
- Brillouin (2)
- Brillouin distributed sensing (2)
- Broadband dielectric spectroscopy (2)
- Bulge effect (2)
- Bulk metallic glasses (2)
- Bus interior materials (2)
- CCUS (2)
- CO2 (2)
- CONSENS (2)
- Calcined clay (2)
- Calcium carbonate (2)
- Calcium sulfate (2)
- Cancer treatment (2)
- Cannibalism (2)
- Carbide (2)
- Carbon capture and storage (2)
- Carbon fibers (2)
- Carbonation (2)
- Carrier protein (2)
- Cells (2)
- Cellular internalization (2)
- Cellular solids (2)
- Cellulose (2)
- Cement matrix (2)
- Ceramic matrix composites (2)
- Certified reference material (2)
- Charge transfer (2)
- Charring (2)
- Chemical composition (2)
- Chemisorption (2)
- Chemometrics (2)
- Chloride (2)
- Chlorides (2)
- Chlorine (2)
- Civil and Structural Engineering (2)
- Clustered nanoparticles (2)
- Clustering (2)
- Coatings and Films (2)
- Cobalt (2)
- Coda Wave Interferometry (CWI) (2)
- Collagen (2)
- Colourants (2)
- Combustion ion chromatography (CIC) (2)
- Comparability (2)
- Condition monitoring (2)
- Conformation (2)
- Conservation (2)
- Contact resonance (2)
- Convolutional neural network (2)
- Coptic (2)
- Core-shell nanoparticles (2)
- Core−shell particles (2)
- Corrosion protection (2)
- Cosolute (2)
- Coulomb explosion (2)
- CrCoNi (2)
- CrMnFeCoNi (2)
- Crack depth (2)
- Crack detection (2)
- Critical strain (2)
- Crop protection products (2)
- Cross-linking (2)
- Crystal orientation (2)
- Crystal structure (2)
- Crystallographic texture (2)
- Cultural heritage (2)
- Cuprorivaite (2)
- Cyclic (2)
- Cyclic R-curve (2)
- Cyclic loading (2)
- DFT calculation (2)
- DIRECTT (2)
- DMSO (2)
- DOPO (2)
- DSC (2)
- DVS (2)
- Data Fusion (2)
- Data analysis (2)
- Data preparation (2)
- Data science (2)
- Dead Sea Scrolls (2)
- Decision support (2)
- Delamination (2)
- Delta scale (2)
- Density separation (2)
- Densty-based Thermodynamics (2)
- Dentistry (2)
- Depletion force (2)
- Derivatization (2)
- Design of experiment (2)
- Design of experiments (2)
- Destructive testing (2)
- Detection (2)
- Deuterium (2)
- Diagnosis (2)
- Diffraction Enhanced Imaging (2)
- Digestion (2)
- Digital Twins (2)
- Digital image correlation (DIC) (2)
- Digital radiography (2)
- Digitalisation (2)
- Dimerization (2)
- Direct laser interference patterning (DLIP) (2)
- Directed Energy Deposition (2)
- Discotic Liquid Crystals (2)
- Disposal (2)
- Dissolution (2)
- Distortion (2)
- Distributed fiber optic sensors (2)
- Distributed humidity sensing (2)
- Distributed strain sensing (2)
- Dityrosine (2)
- Documentation (2)
- Dothideomycetes (2)
- Dripping (2)
- Drop test (2)
- Dual sensing (2)
- Dynamic Light Scattering (2)
- Dynamic loads (2)
- Dynamic test (2)
- ESEM (2)
- Ecodesign (2)
- Ecotoxicity (2)
- Eddy current testing (2)
- Editorial (2)
- Education (2)
- Egyptian blue (2)
- Elasticity (2)
- Elastomers (2)
- Electrochemical impedance spectroscopy (2)
- Electrochemical methods (2)
- Electromagnetic weld pool support (2)
- Electron backscattered diffraction (2)
- Electron beam melting (2)
- Electron beam-induced fragmentation (2)
- Electronic (2)
- Electronic, Optical and Magnetic Materials (2)
- Element-specific spectroscopy (2)
- Elemental composition (2)
- Embedded humidity sensors (2)
- Emission spectroscopy (2)
- Encapsulation (2)
- Endocrine disruptor (2)
- Endokrine Disruptoren (2)
- Energy deposit (2)
- Energy dispersive diffraction (2)
- Energy efficiency (2)
- Enhancement (2)
- Entomopathogen (2)
- Environment (2)
- Environmental conditions (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Epoxy nanocomposites (2)
- Epoxy resin (2)
- Esterification (2)
- Ettringite (2)
- Europium (2)
- Evaporation (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FPLC (2)
- FTIR spectroscopy (2)
- Fatigue damage (2)
- Fatigue tests (2)
- Fatty acid metabolism (2)
- Fe L3 edge absorption spectra (2)
- Femtosecond laser ablation (2)
- Femtosecond laser processing (2)
- Ferromagnetism (2)
- Ferumoxytol (2)
- Fiber optic sensors (2)
- Fiber orientation (2)
- Fiber-optic sensors (2)
- Finite element simulation (2)
- Fire behaviour (2)
- Fire statistics (2)
- Flame inhibition (2)
- Flammability (2)
- Flow properties (2)
- Flowability (2)
- Fluoreszenz (2)
- Fluorides (2)
- Foaming (2)
- Force-distance curves (2)
- Formaldehyde (2)
- Forsterite (2)
- Fracture (2)
- Frequency analysis (2)
- Fuel Cells (2)
- Full notch creep test (FNCT) (2)
- Full penetration (2)
- Functionalized graphene (2)
- G5P (2)
- GFRP (2)
- GMA welding (2)
- GVP (2)
- Gap bridgeability (2)
- Gas analysis (2)
- Gas chromatography (GC) (2)
- Gas explosion (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Gel electrolytes (2)
- Gel electrophoresis (2)
- Gel-type electrolytes (2)
- General Earth and Planetary Sciences (2)
- Geology (2)
- Geometrical effect (2)
- Geophysics (2)
- Geothermal (2)
- Geruchsmessung (2)
- Glass powder (2)
- Glass transition (2)
- Glyphosate (2)
- Gold Nanoparticles (2)
- Grain boundaries (2)
- Grain refinement (2)
- Graphitization (2)
- Growth kinetics (2)
- Gut microbiota (2)
- Gypsum (2)
- HAXPES (2)
- HIP (2)
- HPLC-MS/MS (2)
- HTS (2)
- Halophilic bacteria (2)
- Hapten (2)
- Hardmetal (2)
- Health, Toxicology and Mutagenesis (2)
- Heart failure (2)
- Heat control (2)
- Heat transfer (2)
- Helium (2)
- Heterogeneity (2)
- Heterogeneous catalysis (2)
- High Alloyed Steel (2)
- High strength steel (2)
- High strength steels (2)
- High-performance concrete (2)
- High-power laser beam welding (2)
- High-strength structural steel (2)
- Hot cracking (2)
- Hot stamping (2)
- Human behaviour (2)
- Humidity (2)
- Hybrid metrology (2)
- Hybrid mixtures (2)
- Hybridoma (2)
- Hydrazinolysis (2)
- Hydrogen Embrittlement (2)
- Hydrogen assisted cracking (2)
- Hydrogen evolution reaction (2)
- Hydrogen storage (2)
- Hydrogen-assisted cracking (2)
- Hydroxyl radical (2)
- Hydroxyl radicals (2)
- ISO/IEC 27001 (2)
- Image analysis (2)
- Image quality (2)
- Immunoaffinity extraction (2)
- Immunocapture (2)
- Immunogen (2)
- Immunoglobulins (2)
- Immunosensor (2)
- Impact simulation (2)
- Impact target (2)
- Implant test (2)
- In-situ (2)
- In-situ polymerization (2)
- In-vivo (2)
- Incineration bottom ash (2)
- Indium phosphide (2)
- Indoor air (2)
- Indoor air quality (2)
- Inflammation (2)
- Information security (2)
- Initial crack size (2)
- Ink analysis (2)
- Insect biotechnology (2)
- Instrumentation (2)
- Inter layer time (2)
- Interface (2)
- Interfacial shear strength (2)
- Intumescence (2)
- Intumescent coating (2)
- Ionic liquid (2)
- Ionization (2)
- Ionizing radiation (2)
- Ionizing radiation damage (2)
- Irradiation (2)
- Isogeometric analysis (2)
- Isotope (2)
- Isotope dilution (ID) (2)
- Isotope ratios (2)
- Joint sparsity (2)
- Keratin (2)
- LC-MS (2)
- LEE (2)
- LIF (2)
- LPBF (2)
- Label (2)
- Lapis lazuli (2)
- Laser (2)
- Laser Doppler vibrometer (2)
- Laser beam melting (2)
- Laser beam melting (LBM) (2)
- Laser energy distribution (2)
- Laser hybrid welding (2)
- Laser scanning microscopy (LSM) (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Lateral flow assay (2)
- Lattice distortion (2)
- Lattice misfit (2)
- Lattice parameters (2)
- Lattice structures (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leaching control mechanisms (2)
- Leaching tests (2)
- Lead borate glasses (2)
- Lead ions (2)
- Leather (2)
- Leichte Gesteinskörnungen (2)
- Lethal dose (2)
- Life cycle assessment (2)
- Life sciences (2)
- Limit of detection (2)
- Lipidomic profile (2)
- Liquid Metal Embrittlement (2)
- Liquid chromatography (LC) (2)
- Liquid phase sintering (2)
- Lithium-ion batteries (2)
- Livermore model (2)
- Local structure (2)
- Lorenz transmission electron microscopy (2)
- Low transformation temperature (LTT) steel (2)
- Low-cost (2)
- Lubricants (2)
- Lysimeter (2)
- MC-ICP-MS (2)
- MCS (2)
- Magnesium (2)
- Magnesium hydroxide (2)
- Magnetic beads (2)
- Magnetic flux leakage (2)
- Magnetic properties (2)
- Magnetism (2)
- Management system standard (2)
- Manuscripts (2)
- Marine littering (2)
- Martensitic stainless steels (2)
- Maschinelles Lernen (2)
- Mass spectrometry (MS) (2)
- Material flow analysis (2)
- Materials (2)
- Materials Characterization (2)
- Materials characterization (2)
- Materials informatics (2)
- Mauerwerkbruch (2)
- Mechanical property (2)
- Medical implants (2)
- Melting experiments (2)
- Mercury (2)
- Mesoporous materials (2)
- Metabolic stress (2)
- Metabolism (2)
- Metal (2)
- Metal fluorides (2)
- Metal-organic-frameworks (2)
- Metallic glasses (2)
- Methane (2)
- Metrologie (2)
- Micro-XRF (2)
- Microarray (2)
- Microbeads (2)
- Microbiome (2)
- Microcolonial fungi (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure Design (2)
- Microstructure characterization (2)
- Mikrofluidik (2)
- Mikroplastik (2)
- Milling (2)
- Mitigation (2)
- Mixed ink (2)
- Mixture toxicity (2)
- Model (2)
- Modular Production (2)
- Modulus (2)
- Molecular Dynamics (2)
- Molecularly Imprinted Polymers (2)
- Monolithic column (2)
- Monte Carlo simulation (2)
- Monte-Carlo simulation (2)
- Monte-Carlo simulations (2)
- Multi-principal element alloys (2)
- Multidisciplinary (2)
- Multiphoton lithography (2)
- Multiplex (2)
- Multivariate data analysis (2)
- NMR spectroscopy (2)
- NP (2)
- Nanoindentation (2)
- Nanomaterial classification (2)
- Nanometrology (2)
- Nanoparticle concentration (2)
- Nanoscience (2)
- Native oxide (2)
- Neural network (2)
- Neural networks (2)
- Neutron radiography (2)
- Ni (2)
- Nickel-base superalloys (2)
- Niobium (2)
- Niobium carbide (NbC) (2)
- Nitrogen (2)
- Nitrogen dioxide (2)
- Nitrogen oxides (2)
- Non-Destructive Testing (2)
- Non-destructive Testing (2)
- Non-equilibrium thermodynamics (2)
- Nontarget analysis (2)
- Nuclear magnetic resonance (2)
- Number density (2)
- Numerical process simulation (2)
- OH radical (2)
- OH radical scavenger (2)
- Offshore (2)
- Online NMR Spectroscopy (2)
- Online NMR spectroscopy (2)
- Online monitoring (2)
- Open Science (2)
- Open data (2)
- Open science (2)
- OpenFOAM (2)
- Optical and Magnetic Materials (2)
- Optical detection (2)
- Optical fiber sensor (2)
- Optical flow (2)
- Optical tomography (2)
- Optimization (2)
- Optimization technique (2)
- Organic Chemistry (2)
- Organic contaminants (2)
- Orientation precision (2)
- Origami (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- Oxygen (2)
- P92 (2)
- PBF-LB/M (2)
- PFEM (2)
- PGAA (2)
- PGM-free catalysts (2)
- PIXE (2)
- POD (2)
- Particle scattering (2)
- Particle scattering simulations (2)
- Particle size (2)
- Particle size distribution (2)
- Particles (2)
- Partikel (2)
- Passivation (2)
- Passive RFID (2)
- Pathogen (2)
- Penelope model (2)
- Peptide library (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Phase diagrams (2)
- Phase transformations (2)
- Phosphates (2)
- Phosphine oxide (2)
- Phosphorus fertilizer (2)
- Phosphorus recovery (2)
- Phosphorylated peptides (2)
- Photodegradation (2)
- Phylogeny (2)
- Physical and Theoretical Chemistry (2)
- Physical and theoretical chemistry (2)
- Physics (2)
- Physisorption (2)
- Pigment analyses (2)
- Pigments (2)
- Pipeline steel (2)
- Pitting corrosion (2)
- Plant Science (2)
- Plasma (2)
- Plasma-transferred arc welding (2)
- Plasmid DNA in water (2)
- Plasticity (2)
- Polarity (2)
- Policy making (2)
- Poly(ester urethane) (2)
- Polycyclic aromatic hydrocarbon (PAH) (2)
- Polymer optical fiber (2)
- Polymer optical fibre (2)
- Polymere (2)
- Polymers of Intrinsic Microporosity (2)
- Polymorphism (2)
- Polysaccharides (2)
- Pore space (2)
- Portland cement (2)
- Post-injection pressure drop (2)
- Powders (2)
- Pre-ignition pressure rise (2)
- Prediction (2)
- Predisposal (2)
- Preferential exclusion (2)
- Preheating (2)
- Probability of detection (2)
- Probe (2)
- Process analytical technology (2)
- Process atmosphere (2)
- Process control (2)
- Production (2)
- Prostate cancer (2)
- Protein G (2)
- Protein nitration (2)
- Protein unfolding (2)
- Proteins (2)
- Proteomics (2)
- Proton conductivity (2)
- Provenance studies (2)
- Purification (2)
- Purity (2)
- Quality (2)
- Quality Control (2)
- Quality Infrastructure (2)
- Quantum dot (2)
- Quasicrystal (2)
- RFID sensors (2)
- ROPPOC (2)
- ROS (2)
- Radiation damage to biomolecules (2)
- Radiation therapy (2)
- Radiationtherapy (2)
- Radioactive decay (2)
- Radioactive waste (2)
- Radiolysis (2)
- Raman microscopy (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Ray tracing (2)
- Reactive oxygen species (2)
- Real-time process monitoring (2)
- Recovery (2)
- Rectangular cross-section (2)
- Red phosphorus (2)
- Reference (2)
- Reference data (2)
- Refill friction stir spot welding (2)
- Refraction (2)
- Regeneration (2)
- Regularization (2)
- Reinforced Concrete (2)
- Remediation (2)
- Renewable Energy (2)
- Renewable Energy, Sustainability and the Environment (2)
- Representative specimens (2)
- Residual stress analysis (2)
- Rice husk ash (2)
- Ring opening polymerization (2)
- Risk assessment (2)
- Road tankers (2)
- SAFT (2)
- SHM (2)
- SSRT (2)
- SZ2080 negative photo-resist (2)
- Safety (2)
- Salt (2)
- Salts (2)
- Sapphire (2)
- Scaffold (2)
- Scanning electron microscopy (SEM) (2)
- Screed (2)
- Secondary building materials (2)
- Secondary ion mass spectrometry (2)
- Secondary raw materials (2)
- Selective Laser Melting (SLM) (2)
- Selective laser melting (2)
- Self-healing (2)
- Self-organization (2)
- Semiconductor (2)
- Sensor requirements (2)
- Sensorpartikel (2)
- Sensors in concrete (2)
- Sequence coverage (2)
- Sequential learning (2)
- Serum (2)
- Sewage sludge ash (2)
- Shell (2)
- Short crack propagation (2)
- Short-range order (2)
- Sialic acid (2)
- Silica (2)
- Silicon (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single crystal (2)
- Single molecule (2)
- Single pass welding (2)
- Single-atom catalysts (2)
- Single-source precursors (2)
- Single-stranded DNA-binding proteins (2)
- Size (2)
- Sliding simulation (2)
- Smart sensors (2)
- Smoke gas emission (2)
- Sol-gel (2)
- Solid-state batteries (2)
- Solutions (pH, salinity, cosolutes) (2)
- Sorption isotherm (2)
- Space (2)
- Spark plasma sintering (2)
- Spectral induced polarization (2)
- Spectroscopic ellipsometry (2)
- Sr isotopes (2)
- Stability (2)
- Stainless Steel (2)
- Steels (2)
- Stimulated Brillouin scattering (2)
- Strain measurement (2)
- Stress corrosion cracking (2)
- Stress intensity factor (2)
- Structural dynamics (2)
- Structural integrity (2)
- Structural sealant glazing (2)
- Structure-property relationship (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sulfur (2)
- Surface analysis (2)
- Surface modification (2)
- Surface plasmon resonance (2)
- Surface roughness (2)
- Surface-enhanced Raman scattering (2)
- Surfaces (2)
- Sustainability and the Environment (2)
- Symbiosis (2)
- Synchrotron X-ray refraction radiography (2)
- Synthetic Training Data (2)
- Synthetic peptides (2)
- Sythesis (2)
- T-SEM (2)
- TOPAS (2)
- TOPAS-nbio (2)
- TXRF (2)
- Technological innovation system (2)
- Tempered martensite-ferritic steel (2)
- Terrorism (2)
- Test strips (2)
- Tetrapyrrolic Fe–N–C powders (2)
- Theory (2)
- Thermal analysis (2)
- Thermal conductivity (2)
- Thermal history (2)
- Thermal treatment (2)
- Thermo-responsiveness (2)
- Thermodynamic modelling (2)
- Thermoplastic polyurethane (2)
- Tin acetates (2)
- Tineola bisselliella (2)
- Titanium (2)
- Titanium alloy (2)
- Titanium alloys (2)
- Tool wear (2)
- Torsion (2)
- Train-induced ground vibration (2)
- Transformation (2)
- Transformation product (2)
- Transition metals (2)
- Transmission electron microscopy (TEM) (2)
- Tribologie (2)
- Triple isotope fractionation (2)
- Triplet-triplet annihilation (2)
- Truss structures (2)
- Tryptophan (2)
- Tubular X-joints (2)
- Tumor (2)
- Tumor metabolism (2)
- Two-photon polymerization (2)
- Ultra thin polymer films (2)
- Ultrafine particles (2)
- Ultraschall (2)
- Ultrashort laser material interaction (2)
- Ultrasonic (2)
- Ultrasonic guided waves (2)
- Ultrasonic imaging (2)
- Upconversion nanoparticles (2)
- Vaporization (2)
- Vehicle-track interaction (2)
- Vickers indentation (2)
- Virology (2)
- Virus (2)
- Virus inhibition (2)
- Volume fraction (2)
- Wasser (2)
- Waste management (2)
- Waste treatment (2)
- Water (2)
- Water analysis (2)
- Weld pool dynamics (2)
- Welding simulation (2)
- Weldments (2)
- Wind energy (2)
- Wind turbine (2)
- Wire arc additive manufacturing (2)
- Wood (2)
- Wood protection (2)
- X-ray (2)
- X-ray Photoelectron Spectroscopy (2)
- X-ray absorption near-edge structure (XANES) spectroscopy (2)
- X-ray absorption spectroscopy (2)
- X-ray backscatter imaging (2)
- X-ray computed tomography (CT) (2)
- X-ray computed tomography (XCT) (2)
- X-ray spectroscopy (2)
- X-ray tomography (2)
- Yb(III) complex (2)
- Young’s modulus (2)
- ZIF (2)
- ZIF-8 (2)
- ZfP (2)
- Zinc coatings (2)
- Zink (2)
- atomic force microscopy (2)
- cocrystal (2)
- in situ (2)
- magnesium (2)
- mass spectrometry (2)
- nanoparticle (2)
- ssDNA (2)
- surface modification (2)
- x-ray diffraction (2)
- µ-CT (2)
- Փ-OTDR (2)
- 'Click' reaction (1)
- (Quantitative) Structure-Active Relationships (1)
- 1-indanol (1)
- 1-propyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (1)
- 100Cr6 (AISI 52100) steel (1)
- 12%Cr steel (1)
- 150th anniversary (1)
- 150th anniversary of BAM (1)
- 17α-ethinylestradiol (EE2) (1)
- 1H-NMR (1)
- 2,5-dihydroxyacetophenone (1)
- 20 L-sphere (1)
- 20L-sphere (1)
- 2101 duplex stainless steel (1)
- 266nm (1)
- 280 nm (1)
- 2D Materials (1)
- 2D chromatography (1)
- 2D nanomaterial (1)
- 3-dimensional microscopy (1)
- 3D (1)
- 3D Scanning (1)
- 3D deep convolutional neural network (3D DCNN) (1)
- 3D microstructure (1)
- 3D-Mikrofluidik (1)
- 3DCP (1)
- 4-Dimensional scanning transmission (1)
- 4D tomographic data (1)
- 4H–SiC (1)
- 6xHis (1)
- 9% Ni Steel (1)
- 9%Ni steel (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- A key interface (1)
- A-DNA conformation (1)
- AAAA (1)
- ABC (1)
- ABID (1)
- ABS (1)
- AC magnetic field (1)
- ACEnano (1)
- ACEnet (1)
- ADC (1)
- ADMM (1)
- AEMFC (1)
- AF4 (1)
- AFM cantilever vibration (1)
- AFM force spectroscopy (1)
- AFM intermittent contact (1)
- AFm phase (1)
- AGE (1)
- AHSS (1)
- AHTN (1)
- AHTN-COOMe (1)
- AIE (1)
- AIS (1)
- AM feature integration (1)
- ANFO (1)
- API molecule (1)
- ASR (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- ASTM E647 (1)
- ATCUN (1)
- ATZ (1)
- AZ31 (1)
- Aantimicrobial (1)
- Aautomatisation (1)
- Ab initio Simulation (1)
- Ab initio calculations (1)
- Ab initio simulation (1)
- Ab initio thermodynamics (1)
- Abasic site (1)
- Abbildungsverfahren (1)
- Abdichtbauwerk / Verschlussbauwerk (1)
- Aberfan flowslide (1)
- Absolute dose (1)
- Absorption (1)
- Absorption correction (1)
- Abuse testing (1)
- Abwasser (1)
- Academic Software (1)
- Academic genealogy (1)
- Accelerated aging (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Accelerator mass spectrometry (1)
- Accoustic emission (1)
- Accreditation (1)
- Accuracy (1)
- Acetic acid (1)
- Acetylation (1)
- Acid attack (1)
- Acid-leaching (1)
- Acidic oxygen evolution reaction (1)
- Acidity (1)
- Acidobacteria (1)
- Acoustic (1)
- Acoustic emission analysis (1)
- Acoustic emission monitoring (1)
- Acoustic resonance (1)
- Acoustic test (1)
- Acoustical damping (1)
- Acoustics (1)
- Acousto-optic effect (1)
- Acoustoelasticity (1)
- Acrylamide (1)
- Activation energy (1)
- Active polymer (1)
- Active site density (1)
- Active thermography (1)
- Acute myocardial infarction (1)
- Adaptation (1)
- Adaption (1)
- Adaptive importance sampling (1)
- Additive Fertigung (1)
- Additive Manufacture (1)
- Additive Manufacturing (AM) (1)
- Additive manufactured Ni-base superalloys (1)
- Additives (1)
- Adhesives (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Adjuvantien (1)
- Adoption (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Adsorbed water layer thickness (1)
- Adsorbtion (1)
- Adsorption of pyridine (1)
- Adulteration (1)
- Adulteration detection (1)
- Advanced Materials (1)
- Advanced calorimetry (1)
- Advanced high-strength steel (1)
- Advanced manufacturing (1)
- Advanced material (1)
- Advanced nanomaterials (1)
- Aerial robot olfaction (1)
- Aeroallergens (1)
- Aerodynamic levitation (1)
- Aerosol (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosolsensor (1)
- Aerospace applications (1)
- Affinity (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Affinitätsextraktion (1)
- Aflatoxin (1)
- Ag (1)
- Ag nanoparticles (1)
- Ag-LDI-MS (1)
- AgInS (1)
- Agar (1)
- Agarose (1)
- Agarose gel electrophorese (1)
- Age hardening (1)
- Aggregates (1)
- Aggregation-induced emission (1)
- Aggressive environments (1)
- Agricultural by-product (1)
- Agriculture (1)
- Air analysis (1)
- Air conditioner (1)
- Air filter samples (1)
- Air particulate matter (1)
- Air quality monitoring (1)
- Air-based (1)
- Air-conditioning (1)
- Air-coupled transducers (1)
- Airport (1)
- Akaike information criterion picker (1)
- Akkreditierung (1)
- Aktivkohle (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- AlCl (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg (1)
- AlSi10Mg alloy (1)
- Alanine scan (1)
- Albumin (1)
- Alcium alkali phosphate (1)
- Alexander von Humboldt (1)
- Algal toxins (1)
- Alkali Activated Concrete (1)
- Alkali aggregate reaction (1)
- Alkali aluminosilicate glasses (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated (1)
- Alkali-activated binders (1)
- Alkali-activated building materials (1)
- Alkali-activated slag (1)
- Alkali-silica reaction (1)
- Alkaline brines (1)
- Alkaline earth metal coordination polymers (1)
- Alkalis (1)
- Alkali–silica reaction (1)
- Alkyd resin-based coating (1)
- Allergene (1)
- Allergie (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alloys (1)
- Alpha (1)
- Alpha-tricalcium phosphate (1)
- Altenuene (1)
- Alternaria mycotoxins (1)
- Alternative Energieträger (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminium fluorides (1)
- Aluminium hydroxide (1)
- Aluminium oxide hydroxide (1)
- Aluminium teflates (1)
- Aluminosilicate glasses (1)
- Aluminum (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Aluminum bronze (1)
- Aluminum diethyl phosphinate (1)
- Aluminum oxide (1)
- Aluminum trihydroxide (ATH) (1)
- Alveolar-capillary coculture model (1)
- Alzheimer’s disease (1)
- Al‐Cu‐Li‐alloy (1)
- Al–Si metal matrix composites (1)
- Ambient aerosols (1)
- Ammonium polyphosphate (1)
- Amorphous materials (1)
- Amorphous silica (1)
- Amphiphilic dumbbells (1)
- Amplification (1)
- Amyloid-beta (1)
- Anaerobic pathways (1)
- Analysis technique (1)
- Analytic signal (1)
- Analytical calculation (1)
- Analytical model (1)
- Analytical quality assurance (1)
- Analytical sciences (1)
- Analytical screening techniques (1)
- Analyzer-Based Imaging (1)
- Anatoxin-a (1)
- Anatoxin-a(s) (1)
- Ancestor of opportunistic pathogens & lichens (1)
- Ancient document production (1)
- Aneurysm (1)
- Angiography (1)
- Angiotensin II (1)
- Angle measurement (1)
- Angle wedge (1)
- Anhydrite (1)
- Aniline (1)
- Animal immune system (1)
- Animal slurry (1)
- Anion recognition (1)
- Anisotropic fiber orientation (1)
- Anisotropy (1)
- Annealing (1)
- Anobium punctatum (1)
- Anodic oxidation (1)
- Anomalous Small Angle X-ray Scattering (1)
- Anosteocytic bone (1)
- Antagonism (1)
- Antagonists (1)
- Antenna effect (1)
- Anthropocene (1)
- Anti-corrosion coatings (1)
- Anti-counterfeiting (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial properties (1)
- Antibacterial surfaces (1)
- Antibodies (1)
- Antibody Purification (1)
- Antibody coating (1)
- Antibody drug conjugate (1)
- Antibody identification (1)
- Antibody labeling (1)
- Antibody-gated indicator delivery (1)
- Anticancer (1)
- Antifouling surface (1)
- Antigen (1)
- Antigens (1)
- Antimicrobial coating (1)
- Antimicrobial materials (1)
- Antimicrobial surfaces (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimicrobials (1)
- Antimony (1)
- Antiphase boundary (1)
- Apis mellifera (1)
- App (1)
- Application (1)
- Applications (1)
- Approximant (1)
- Aptamere (1)
- Aqdditive manufacturing (1)
- Aquatic fungi (1)
- Aqueous media (1)
- Aqueous quantum dot (1)
- Aqueous synthesis (1)
- Aquifer fluid (1)
- Arabidopsis (1)
- Archaea (1)
- Architecture (1)
- Argon (1)
- Aromatic (1)
- Aromatic aldehydes (1)
- Array (1)
- Arrhenius (1)
- Arrhenius equation (1)
- Arsenite (1)
- Art restauration (1)
- Arthoniomycetes (1)
- Artificial Intelligence (AI) (1)
- Artificial Neural Networks (1)
- Artificial cells (1)
- Artificial neural network modelling (1)
- Artificial potential field (1)
- Artificial weathering (1)
- Arzneistoffe (1)
- As-built LPBF IN718 alloy (1)
- Ash content (1)
- AshDec (1)
- Aspergillus (1)
- Asphalt (1)
- Asymmetric flow filed-flow fractionation (1)
- Asymmetric supercapacitor (1)
- Asymptotic local approach (1)
- Atherosclerotic plaques (1)
- Atmospheric aerosol (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Atom catalysts (1)
- Atomic Absorption Spectrometry (1)
- Atomic Scale (1)
- Atomic absorption spectrometry (1)
- Atomic and molecular physics, and optics (1)
- Atomic force microscope (1)
- Atomic layer deposition (1)
- Attenuation (1)
- Au nanoparticles (1)
- Aufbereitung (1)
- Augenbohne (1)
- Augmented data (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic stainless steel (1)
- Austenitic stainless steels (1)
- Austenitic steel 316L (1)
- Auswaschung (1)
- Autoantibodies (1)
- Automated Bragg angle determination (1)
- Automated Data Evaluation (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated Purification (1)
- Automated analysis (1)
- Automated expansion measurement (1)
- Automated manufacturing (1)
- Automated operational modal analysis (1)
- Automated scanning systems (1)
- Automatic Segmentation (1)
- Automatic segmentation (1)
- Automotive (1)
- Automotive braking (1)
- Automotive engineering (1)
- Automotive industry (1)
- Autophagy (1)
- Aviation (1)
- Axle (1)
- Axle box measurements (1)
- Axle inspection (1)
- Axle sequence (1)
- Ayesian models (1)
- Aza-BODIPY (1)
- Azide-terminated surfaces (1)
- BAM (1)
- BAM SynthCOND (1)
- BAM SynthMAT (1)
- BAM-P109 (1)
- BCA test (1)
- BDP (1)
- BEMMA (1)
- BLEVE (1)
- BODIPY dyes (1)
- BODIPY probe (1)
- BODIPY-Farbstoffe (1)
- BODIPYs (1)
- BOTDA (1)
- BPA removal (1)
- BPF-LB/M (1)
- BSA (1)
- Bacillus subtilis (1)
- Back-side integration (1)
- Background processing (1)
- Backlight (1)
- Backscattered electrons (1)
- Backscattering (1)
- Bacteria detection (1)
- Bacterial adhesion (1)
- Bacterial cell cycle (1)
- Bacterial lipopolysaccharides (1)
- Bacterial lysates (1)
- Bacterial milking (1)
- Bacterial second messenger (1)
- Bags (1)
- Bainitischer Schmiedestahl (1)
- Banana (1)
- Barriers (1)
- Base isolation (1)
- Basic spatial resolution (1)
- Basidiomycetes (1)
- Batch fermentation (1)
- Batch reactions (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Battery (1)
- Battery Safety (1)
- Battery characterization (1)
- Baustoffe (1)
- Baustoffuntersuchungen (1)
- Bauteilauslegung (1)
- Bauwerksüberwachung (1)
- Bawit (1)
- Bayesian Inference (1)
- Bayesian Optimization (1)
- Bayesian hierachical modelling (1)
- Bayesian technique (1)
- Bayesian updating of stress ranges (1)
- Bead injections (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Bee diseases (1)
- Bee health (1)
- Behavioural mechanisms (1)
- Behmite (1)
- Belastungstest (1)
- Belastungsversuch (1)
- Bell (1)
- Bell pepper (1)
- Bench-scale fire resistance (1)
- Benchmarking study (1)
- Benchtop NMR (1)
- Bending (1)
- Bending mechanism (1)
- Bending modulus (1)
- Bending test (1)
- Beneficial microbes (1)
- Benzene-1,3,5-tricarboxylic acid (1)
- Benzin (1)
- Benzothiadiazole (1)
- Benzoxadiazole dyes (1)
- Berry phase (1)
- Beschichtung (1)
- Bet v 1 (1)
- Beta elimination (1)
- Beta particle (1)
- Betonbeschichtung (1)
- Betonschwellen (1)
- Betriebsfestigkeit (1)
- Betula pendula (1)
- Bewehrung (1)
- Bewertungsverfahren (1)
- Bifunctional 2D nanomaterials (1)
- Bifunctional MgF2 (1)
- Bildqualität (1)
- Bimetallic noble metal nanoparticles (1)
- Binary gas mixture (1)
- Binary zinc alloys (1)
- Binder (1)
- Binder jetting (1)
- Binders (1)
- Binders/binding (1)
- Binding molecule (1)
- Bingham fluid (1)
- Bio active ceramic (1)
- Bio-based concrete (1)
- Bio-based insulation (1)
- Bio-ceramic engineering (1)
- BioSAXS (1)
- Bioaccumulation (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioanalysis (1)
- Biobased (1)
- Biobased polymers (1)
- Biochip (1)
- Biocidal product (1)
- Biocidal products (1)
- Biocide tolerance (1)
- Bioconjugate (1)
- Biocorrosion (1)
- Biodegradable (1)
- Biodegradable implant (1)
- Biodeterioration and biodegradation (1)
- Biodiesel fuel (1)
- Biodosimetry (1)
- Bioeconomy (1)
- Bioengineering (1)
- Bioerosion (1)
- Biofilm formation (1)
- Biofouling (1)
- Biofuel cells (1)
- Biokorrosion (1)
- Biokunststoff (1)
- Biological & biomedical applications (1)
- Biological pest control (1)
- Biological structure (1)
- Biological techniques (1)
- Biologisches Dosimeter (1)
- Biology (1)
- Biomarkers (1)
- Biomass (1)
- Biomedical engineering (1)
- Biomimetic (1)
- Biomimicry (1)
- Biomolecules (1)
- Biopolymer (1)
- Biopolyol (1)
- Bioreceptivity (1)
- Bioresorbable Biomaterials (1)
- Biosensor development (1)
- Biosensoren (1)
- Biosensors (1)
- Bioseparation (1)
- Biosilicification (1)
- Biosynthesis (1)
- Biotic environment (1)
- Biotic weathering (1)
- Biotoxins (1)
- Biozidprodukte (1)
- Biphasic calcium phosphate (1)
- Biphasic growth (1)
- Bipyramid (1)
- Birch pollen allergen (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bismuth Ferrite (1)
- Bismuth titanates (1)
- Bistable fluidic amplifier (1)
- Bituminous binders (1)
- Bituminous material (1)
- Black phosphorus (1)
- Black writing ink (1)
- Blade (1)
- Blattodea (1)
- Blended cement (1)
- Blended learning (1)
- Blends (1)
- Bloch wall (1)
- Block regularization (1)
- Block-sparsity (1)
- Blockcopolymer (1)
- Blue-green algae (1)
- Boden (1)
- Boehmite nanoparticles (1)
- Boltzmann plot (1)
- Bombs (1)
- Bond energy (1)
- Bone grafting (1)
- Bone porosity (1)
- Bone regeneration (1)
- Bone screws (1)
- Bone substitutes (1)
- Bone tissue engineering (1)
- Borate (1)
- Boron compound (1)
- Boron isotope fractionation (1)
- Boron isotopes (1)
- Boron transport (1)
- Borosilicate Glass (1)
- Borosilicatglas (1)
- Borosilikatglas (1)
- Boson peak (1)
- Bound water (1)
- Boundary element (1)
- Bovine serum albumin (1)
- Bovine serum albumin (BSA) (1)
- Bradford (1)
- Bragg angles (1)
- Bragg peak (1)
- Bragg-edge (1)
- Braking-in-a-turn maneuver (1)
- Brass (1)
- Bravais lattices (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Brillouin distributed fiber optic sensors (1)
- Brillouin sensing (1)
- Brinell hardness (1)
- Broadband dielectric microscopy (1)
- Bromination (1)
- Bromoadenine (1)
- Bronsted acidity (1)
- Brown-rot fungi (1)
- Brownian motion (1)
- Bruchmechanik (1)
- Bubble test (1)
- Buffer (1)
- Building material (1)
- Building response (1)
- Building with earth (1)
- Built environment (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effects (1)
- Bulk temperature (1)
- Bundesanstalt für Materialforschung und -prüfung (1)
- Buried interfaces (1)
- Burning behavior (1)
- Burning behaviour (1)
- Byproducts (1)
- Bystander effect (1)
- C-C coupling (1)
- C-F activation (1)
- C-di-GMP (1)
- C7H15N2O4P (1)
- CALPHAD database analysis (1)
- CCMat (1)
- CCQM (1)
- CE/MC-ICP-MS (1)
- CEA (1)
- CFD (1)
- CFD model (1)
- CFD simulation (1)
- CGHE (1)
- CHC (1)
- CLP-regulation (1)
- CMT welding (1)
- CNTs (1)
- CO2 + n-alkanes (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- CO2-storage (1)
- COF (1)
- COK-12 (1)
- COPV (1)
- COST action CA15114 AMICI (1)
- COVID-19 (1)
- CPC calibration (1)
- CPD (1)
- CRISPR/Cas9 (1)
- CRM (1)
- CRP (1)
- CT simulation (1)
- CUINS2 nanocrystals (1)
- CXC (1)
- CaCl emission bands (1)
- Cables (1)
- Cabon capture and storage (1)
- Cadmium (1)
- Caenorhabdtis elegans (1)
- Caffeine (1)
- Calamistrum (1)
- Calcite (1)
- Calcium (1)
- Calcium alkali orthophosphate materials (1)
- Calcium alkali phosphate (1)
- Calcium alkaline orthophosphates (1)
- Calcium carbide method (1)
- Calcium carbonates (1)
- Calcium phosphate (1)
- Calcium phosphate bone cement (1)
- Calcium silicate (1)
- Calcium silicate hydrate (1)
- Calciumfluorid (1)
- Calibrated fluorescence measurements (1)
- Calibration-free analysis (1)
- Caloric effects (1)
- Calorimetry (1)
- Cancer awareness measure (1)
- Cancer cells (1)
- Cancer risk (1)
- Canine olfactometry (1)
- Canny approach (1)
- Cantilever microprobe (1)
- Cantor (1)
- Capacitive methods (1)
- Capillary (1)
- Capillary waves (1)
- Capnodiales (1)
- Carbamazepine (1)
- Carbohydrates (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Nanotubes (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon cycle (1)
- Carbon dioxide emissions (1)
- Carbon dioxide footprint (1)
- Carbon dioxide reduction (1)
- Carbon dots (1)
- Carbon fiber-reinforced polymer (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbon fibre-reinforced plastic (1)
- Carbon fibres (1)
- Carbon ions (1)
- Carbon materials (1)
- Carbon nanodots (1)
- Carbon nanoparticles (1)
- Carbon storage (1)
- Carbon-based nanomaterials (1)
- Carbonate substrate (1)
- Carbonation behaviour (1)
- Cardiac troponin (1)
- Cardiolipins (1)
- Cardiovascular (1)
- Cargo sloshing (1)
- Carrier (1)
- Carrier load (1)
- Carrier-Material (1)
- Carriers (1)
- Cascade impactor (1)
- Casein standard (1)
- Casing (1)
- Cassical nucleation theory (1)
- Casting (1)
- Castings (1)
- Catalogues (1)
- Catalyst layer (1)
- Catalysts (1)
- Categorisation scheme (1)
- Cathode active material (1)
- Cationic photocuring (1)
- Cconventional method (1)
- Ccs (1)
- CdTe quantum dots (1)
- Cell (1)
- Cell adhesion (1)
- Cell appendages (1)
- Cell culture media (1)
- Cell proliferation (1)
- Cell size (1)
- Cell studies (1)
- Cell-repellent surfaces (1)
- Cellular structures (1)
- Cellular substructure (1)
- Cellulose ether (1)
- Cellulose nanofibrils (1)
- Cellulose synthase (1)
- Cement admixtures (1)
- Cement clinker remnants (1)
- Cement paste (1)
- Cement suspension (1)
- Center of mass (1)
- Central Asia (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Cermet (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Chaetothyriales (1)
- Chalcopyrite (1)
- Chance-risk analysis (1)
- Channeling-in (1)
- Characterisation (1)
- Characterisation techniques (1)
- Characterization and analytical techniques (1)
- Characterization of corrosion layers (1)
- Charakterisierung (1)
- Charge density (1)
- Charge-to-size-ratio (1)
- Charged dyes (1)
- Charpy impact toughness (1)
- Chelate (1)
- Chemical Biology (1)
- Chemical Process Control (1)
- Chemical Safety (1)
- Chemical admixtures (1)
- Chemical bonds (1)
- Chemical ecology (1)
- Chemical evolution (1)
- Chemical extraction (1)
- Chemical processes (1)
- Chemical protein modification (1)
- Chemical recycling (1)
- Chemical synthesis (1)
- Chemically Complex Materials (1)
- Chemically complex alloy (1)
- Chemicals classification (1)
- Chemiluminescence (1)
- Chemisches Recycling (1)
- Chemo-mechanical coupling (1)
- Chemodosimeter (1)
- Chemometric tools (1)
- Chemometrie (1)
- Chemputer (1)
- Chicken antibodies (1)
- Chicken manure ash (1)
- Chirality (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Chlorine determination (1)
- Chloroanilines (1)
- Chrystal orientation (1)
- Chunky graphite (1)
- Ciaaw.org (1)
- Cimensional Accuracy (1)
- Circular Bio-based Economy (1)
- Circular Economy (1)
- Circularity (1)
- Circumferential weld (1)
- Citation (1)
- Citizen Science (1)
- Citrullinated (1)
- Civil Engineering (1)
- Classical primary measurement method (CPM) (1)
- Clean steel (1)
- Cleaning (1)
- Clearing (1)
- Cleavage (1)
- Cleridae (1)
- Clerodin (1)
- Click Chemistry (1)
- Click chemistry (1)
- Click reaction (1)
- Climate (1)
- Clinical Biochemistry (1)
- Clinoptilolite (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Closed vessel combustion (1)
- Co (1)
- Co-Cr-alloy (1)
- Co-firings (1)
- Co2-Storage (1)
- Coaggregation (1)
- Coastal protection (1)
- Coatings (1)
- Cobaloxime complex (1)
- Cobalt-chromium alloy (1)
- Cockroach (1)
- Cockroaches (1)
- Cocoa (1)
- Coda (1)
- Coda Wave Interferometry (1)
- Codex (1)
- Coefficient of thermal expansion (1)
- Coexpression (1)
- Coherent optical time domain reflectometry (1)
- Cohesive zone (1)
- Coincidence (1)
- Cold cracking (1)
- Cold cracking safety (1)
- Cold to fast neutron testing (1)
- Coleoptera (1)
- Collaborative trial (1)
- Collection (1)
- Colloidal semiconductor nanocrystals (1)
- Colloids (1)
- Color (1)
- Color X-ray camera (1)
- Colour center (1)
- Colouring (1)
- Column holder (1)
- Column percolation (1)
- Columnar crystal growth (1)
- Combinatorial chemistry (1)
- Combinatorial peptide library (1)
- Combined finite-element boundary-element method (1)
- Combined sewer system (1)
- Combined techniques (1)
- Combustion (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Combustion ion chromatography (1)
- Commercial acoustic devices (1)
- Commercial metal-organic frameworks (1)
- Commercialization (1)
- Compact NMR (1)
- Comparative genomics (1)
- Comparative life cycle assessment (1)
- Comparison (1)
- Comparison of detectors (1)
- Compartmentalization (1)
- Compatibility evaluation (1)
- Complementary methodology and metrology (1)
- Complex Molecular Systems (1)
- Complex systems (1)
- Complex-shape (1)
- Complexation (1)
- Complexity (1)
- Component test (1)
- Component-like test (1)
- Components influence (1)
- Components of excitation (1)
- Composite Overwrapped Pressure Vessels (1)
- Composite material (1)
- Composite overwrapped pressure vessels (1)
- Composite panel (1)
- Composite structures (1)
- Composites in fire (1)
- Compositionally complex alloys (1)
- Compost (1)
- Compound semiconductors (1)
- Compound-independent calibration (1)
- Compressed earth (1)
- Compressed sensing (1)
- Compression mechanical (1)
- Compression strength (1)
- Compression stress relaxation (1)
- Compression testing (1)
- Compression tests (1)
- Compressive test (1)
- Computational Materials Science (1)
- Computational fluid dynamics (1)
- Computations (1)
- Computed radiography (CR) (1)
- Computed tomography (CT) (1)
- Computer Science Applications (1)
- Computer Tomography (1)
- Computer vision (1)
- Computertomographie (1)
- Comressed Sensing (1)
- Concentration (1)
- Concentration step (1)
- Concept (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete and screed (1)
- Concrete beam (1)
- Concrete bridges (1)
- Concrete deterioration (1)
- Concrete drying (1)
- Concrete evaluation (1)
- Concrete printing (1)
- Concrete repair (1)
- Concrete specimens (1)
- Concrete structures (1)
- Concrete testing (1)
- Condensate (1)
- Condensation particle counter (CPC) (1)
- Conditioning films (1)
- Conductive carbon tape (1)
- Conductivity (1)
- Cone claorimeter (1)
- Conference (1)
- Confined catalyst (1)
- Confocal raman imaging (1)
- Conformity assessment (1)
- Conformity assessment body (1)
- Conjugate (1)
- Conjugation density (1)
- Conjugation ratio (1)
- Connectivity (1)
- Consequences (1)
- Conservation of wooden artwork (1)
- Constantinomyces (1)
- Construction (1)
- Construction and demolition waste (1)
- Construction product (1)
- Consumer Products (1)
- Consumer products (1)
- Container inspection (1)
- Contaminated soil (1)
- Contaminated soils (1)
- Contamination (1)
- Continuous Processes (1)
- Continuous Sensor (1)
- Continuous culture (1)
- Continuous processes (1)
- Continuous wavelet transform (1)
- Contour scan strategy (1)
- Contraction (1)
- Control strategy (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Conventional isotope ratio (1)
- Conversion (1)
- Converter material (1)
- Convolutional Neural Network (DCNN) (1)
- Convolutional neural networks (1)
- Convolutional neural networks (CNN) (1)
- Coordination (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolymer sequence (1)
- Copolymerization (1)
- Copper Deposition (1)
- Copper sulfide (1)
- Coprecipitation (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptotermes (1)
- Coputed tomography (1)
- Core microbiome (1)
- Core-shell structures (1)
- Core–shell particles (1)
- Corner echo (1)
- Corona (1)
- Corona virus (1)
- Corophium volutator (1)
- Correlative analysis (1)
- Correlative tomography (1)
- Corresponding relative humidity (1)
- Corrosion costs (1)
- Corrosion investigations (1)
- Corrosion mechanism (1)
- Corrosion monitoring (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Corrugated fibreboard box (1)
- Corrugated fibreboard boxes (1)
- Corundum (1)
- Cost benefit analysis (1)
- Counterions (1)
- Coupling (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Coverslip seal (1)
- Covid-19 (1)
- Co−N-Cs (1)
- Cr(III) complex (1)
- Crack Detection (1)
- Crack closure effect (1)
- Crack damage detection (1)
- Crack driving force (1)
- Crack healing (1)
- Crack opening displacement (1)
- Crack-tip constraint (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creep behavior (1)
- Creep damage (1)
- Creep mechanisms (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Creep-resisting materials (1)
- Cribellate spiders (1)
- Critical chloride content (1)
- Critical energy release rate (1)
- Critical raw materials (1)
- Critical strain rate (1)
- Cross section (1)
- Cross-feeding (1)
- Cross-resistance (1)
- Cross-sectioning (1)
- Crosshole (1)
- Crosslinking (1)
- Crosslinking density (1)
- Cryo XPS (1)
- Cryoadsorption (1)
- Cryogenic Vessels (1)
- Cryogenic einvironment (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Crystal branch development (1)
- Crystal growth (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Crystalline admixture (1)
- Crystalline cones (1)
- Crystalline defects (1)
- Crystalline phase identification (1)
- Crystallization sequence (1)
- Crystallography (1)
- Crystalstructure (1)
- Cu catalysts (1)
- Cucurbituril (1)
- Cumin discrimination (1)
- Cumulative energy demand (1)
- Cupriavidus campinensis (1)
- Curie temperature (1)
- Curve fitting (1)
- Cuticular hydrocarbons (1)
- Cutting forces (1)
- Cutting tool (1)
- Cuttlefish (1)
- Cyanide in soil (1)
- Cyanotoxins (1)
- Cyber-Physical Systems (1)
- Cyber-physical system (1)
- Cyclic Voltammetry (1)
- Cyclic musk (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cyclic voltammetry (1)
- Cyclic weathering (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cylindrical turning (1)
- Cylindrospermopsin (1)
- Cytocompatibility (1)
- Cytop (1)
- Cytoplasm (1)
- C–C coupling (1)
- DAMP (1)
- DAR (1)
- DCB geometry (1)
- DED-EB (1)
- DED-arc (1)
- DFA (1)
- DFT calculations of Raman spectra (1)
- DFT simulations (1)
- DFT spectrum simulations (1)
- DHAP (1)
- DHN melanin (1)
- DIN tube furnace (1)
- DLO (1)
- DLP (1)
- DLS (1)
- DMA (1)
- DMD (1)
- DMDHEU (1)
- DNA Dosimeter (1)
- DNA base damage (1)
- DNA based data storage (1)
- DNA data storage (1)
- DNA degradation (1)
- DNA long term storage (1)
- DNA melting temperature (1)
- DNA origami nanostructures (1)
- DNA polymerase (1)
- DNA protection (1)
- DNA radiosensitizer (1)
- DNA reference material (1)
- DNA stability (1)
- DNA strand breaks (1)
- DNA strand-break (1)
- DNA transfer (1)
- DNA vortexing (1)
- DNPH (1)
- DPA (1)
- DRIFTS (1)
- DSB (1)
- DSM 5009 (1)
- DSS (1)
- DTAB (1)
- DTGS (1)
- DWV (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection systems (1)
- Damage evolution (1)
- Damage localization (1)
- Damage prediction (1)
- Damage tolerance (1)
- Damage-associated molecular patterns (DAMPs) (1)
- Damages (1)
- Dampfdruck (1)
- Damping factor (1)
- Dangerous substance (1)
- Darkfield imaging (1)
- Darkfield microscopy (1)
- Darr method (1)
- Data (1)
- Data Interoperability (1)
- Data Set (1)
- Data correction (1)
- Data curation (1)
- Data driven design (1)
- Data evaluation methods (1)
- Data fitting (1)
- Data infrastructures (1)
- Data integration (1)
- Data mapping (1)
- Data readiness level (1)
- Data-driven material design (1)
- Data-driven materials design (1)
- Data-driven quality assurance (1)
- Data-integration (1)
- Database (1)
- Datenfusion (1)
- Dauerhaftigkeit (1)
- De novo peptide sequencing (1)
- Debinding (1)
- Debonding (1)
- Debonding Mechanism (1)
- Debye scattering equation (1)
- Debye-Waller factor (1)
- Debye-Waller-Faktor (1)
- Decachlorotetrasilane (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Decline (1)
- Deep Convolutional Neural Network (DCNN) (1)
- Deep Discharge (1)
- Deep learning segmentation (1)
- Deep learning-based tools (1)
- Deep penetration laser beam welding (1)
- Defect population (1)
- Defect reconstruction (1)
- Definition (1)
- Degradation of refrigerants (1)
- Degradation studies (1)
- Degradative processes (1)
- Dehydration (1)
- Dehydroxylation (1)
- Delta isotope standard (1)
- Delta value (1)
- Demolition wastes (1)
- Dendrimer (1)
- Dendrimersomes (1)
- Dendritic (1)
- Dendritic polyglycerol (1)
- Denitrification (1)
- Denkmalpflege (1)
- Denoising Deblurring Sharpening (1)
- Density Functional Theory (1)
- Density data (1)
- Density-based Model (1)
- Dental composite materials (1)
- Dental materials (1)
- Dentin (1)
- Dentine (1)
- Depth profile (1)
- Desert ecology (1)
- Desorption (1)
- Detail detection (1)
- Detection of dangerous materials (1)
- Detectors (1)
- Deteriorating structures (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Deviatoric (1)
- Diagnostic Antibodies (1)
- Diastolic dysfunction (1)
- Diatomic molecule (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Dice score (1)
- Dichtheit (1)
- Dichtungen (1)
- Diclofenac (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Dielectric spectroscopy (1)
- Dielectrics (1)
- Diesel (1)
- Diesel Particulate Filter Materials (1)
- Diesel exhaust (1)
- Dietary adaptation (1)
- Difenoconazole (1)
- Different electrochemical conditions (1)
- Different load cases (1)
- Differential expression (1)
- Differential scanning calorimetry (DSC) (1)
- Difficult-to-copy (1)
- Diffraction contrast neutron imaging (1)
- Diffraction elastic constants (1)
- Diffraction peak width (1)
- Diffraction-elastic constants (1)
- Diffractive gratings (1)
- Diffusion/diffusivity (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Diffusivity (1)
- Diffusons (1)
- Digital Detector Array (DDA) (1)
- Digital Image Correlation (1)
- Digital Transformation (1)
- Digital detector array (1)
- Digital detectors (1)
- Digital holographic cytometry (1)
- Digital immunoassay (1)
- Digital industrial radiology (1)
- Digital radiology (1)
- Digital representations (1)
- Digital transformation (1)
- Digital twin (1)
- Digital twins (1)
- Digital volume correlation (1)
- Digital workflows (1)
- Digitale Radiographie (1)
- Digitale Radiologie (1)
- Digitalisierung der Prozessindustrie (1)
- Digitization of process industry (1)
- Dimensional metrology (1)
- Dimer (1)
- Dip-stick assay (1)
- Dipsersive XAS (1)
- Direct damage (1)
- Direct laser deposition (1)
- Direct laser interference patterning (1)
- Direct material input (1)
- Directed energy deposition (1)
- Directional grain growth (1)
- Disbond (1)
- Discontinuities (1)
- Discrete element method (1)
- Disease (1)
- Disinfection Fuel (1)
- Disinfection by-product (1)
- Dislocation (1)
- Dislocation density (1)
- Dislocations (1)
- Disorganized bone (1)
- Disorientation (1)
- Dispersion (1)
- Dispersion of nanomaterials (1)
- Dispersive XAS (1)
- Dispersive-XAS (1)
- Displacement (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Dissociative electron attachment (1)
- Dissociative electron attachment (DEA) (1)
- Dissociative electron transfer (DET) (1)
- Distortion upon baseplate removal (1)
- Distributed Acoustic Sensing (1)
- Distributed Fiber Optic Sensor (1)
- Distributed acoustic sensing (DAS) (1)
- Distributed fibre optic sensor (1)
- Distributed sensor (1)
- Distributed temperature gradient sensing (1)
- Distributed vibrations sensing (DVS) (1)
- Distribution of relaxation times analysis (1)
- Disulfides (1)
- Ditigtal image correlation (1)
- Dityrosine crosslinking (1)
- Diversity (1)
- Docking (1)
- Domain Ontology Development (1)
- Domain decomposition methods (1)
- Domain wall (1)
- Double complex compound (1)
- Double complex salts (1)
- Double notched creep specimen (1)
- Double-multilayer monochromators (1)
- Down Stream Processing (1)
- Downburst (1)
- Downhole (1)
- Downstream Processing (1)
- Downstream processing (1)
- Draft Genome (1)
- Drag resistance (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Drinking water (1)
- Driving rain (1)
- Driving style (1)
- Druckstabilität (1)
- Drug Development (1)
- Drug Discovery (1)
- Drug delivery (1)
- Drug discovery (1)
- Drug-to-antibody ratio (1)
- Dry contact transducers in boreholes (1)
- Dry reforming of methane (1)
- Dry treatment (1)
- Drywood termite (1)
- Dual phase steel (1)
- Dual-color labeling glycan (1)
- Dual-energy (1)
- Dual-environment (1)
- Ductile cast iron (1)
- Duplex AISI 2205 (1)
- Duplex stainless steel (1)
- Duplex steels (1)
- Durability assessment (1)
- Durchstrahlungsprüfung (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-time (1)
- DySEM (1)
- Dyad (1)
- Dye loading optimisation (1)
- Dye monomers (1)
- Dye release (1)
- Dye-doped fiber (1)
- Dyes (1)
- Dyes and pigments (1)
- Dyes/pigments (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic calibration gas mixtures (1)
- Dynamic fracture mechanics (1)
- Dynamic light scattering (1)
- Dynamic scanning calorimetry (1)
- Dynamic surface leaching test (1)
- Dynamic test method (1)
- Dünnschichttechnik (1)
- E-aldoximes (1)
- E-nose (1)
- E. coli (1)
- EAF slags (1)
- EBAM (1)
- EC definition of a nanomaterial (1)
- EC nanomaterial definition (1)
- EC/MS (1)
- ECR (1)
- EDS (1)
- EDTAD (1)
- EDX (1)
- EFQM Excellence Modell (1)
- EFTEM (1)
- EN 717-3 (1)
- EN AW-2618A (1)
- EP-3533 (1)
- EPMA (1)
- EPR (1)
- EPREL (1)
- EPS (1)
- ESCA (1)
- ESMA (1)
- ESPR (1)
- EU-CLP (1)
- EU-WFD (1)
- EURAS (1)
- EVA (1)
- Early Earth (1)
- Early oxidation (1)
- Early sulfidation (1)
- Earth block masonry (1)
- Earth material (1)
- Earthen building materials (1)
- Earthquake Monitoring (1)
- Earthquake data (1)
- Earthworms (1)
- Eco-efficiency analysis (1)
- Ecological scarcity method (1)
- Ecotoxicity tests (1)
- Ecotoxixity (1)
- Ectoine DNA protection (1)
- Ectoine UV absorption (1)
- Ectoine excretion (1)
- Ectoine hydration (1)
- Ectoine-DNA binding (1)
- Eddy Current (1)
- Eddy-current testing (1)
- Edge quality (1)
- Effect of scanning strategies (1)
- Effective attenuation coefficient (1)
- Effective gas diffusion coefficient (1)
- Effective irradiation dose 0.2-16 [Gy] (1)
- Efficacy (1)
- Effusivity (1)
- Egress (1)
- Egypt (1)
- Elastic (1)
- Elastic Crystal (1)
- Elastic behavior (1)
- Elastic constants (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elastic reverse time migration (1)
- Elastic waves (1)
- Elastin (1)
- Elastin-specific contrast agent ESMA (1)
- Elastin-specific molecular agent (1)
- Elastodynamic Finite Inegration Technique (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electric conductivity (1)
- Electrical conductivity (1)
- Electrical insulators (1)
- Electrics (1)
- Electro-fused zirconia (1)
- Electrochemical (1)
- Electrochemical CO2 conversion (1)
- Electrochemical behavior (1)
- Electrochemical catalysts (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical permeation (1)
- Electrochemical titration (1)
- Electrochemical treatment (1)
- Electrochromism (1)
- Electrodialysis (1)
- Electrolysis (1)
- Electrolyte membrane (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic forces (1)
- Electromagnetic rectification (1)
- Electromagnetic scattering (1)
- Electromagnetic stirring (1)
- Electromagnetic theories (1)
- Electromagnetic weld pool support system (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron beam welding (1)
- Electron beam-induced charging (1)
- Electron irradiation (1)
- Electron irradiation 30 [kV] (1)
- Electron probe microanalysis (1)
- Electron tomography (1)
- Electron transfer (1)
- Electronic Lab Notebook (ELN) (1)
- Electronic skin (1)
- Electronic structure (1)
- Electrons (1)
- Electroosmosis (1)
- Electrophoresis (1)
- Electrospinning (1)
- Electrospun nanocomposite fiber (1)
- Elektrochemie (1)
- Elektrochemilumineszenz (1)
- Elektrolyse (1)
- Elektronenmikroskopie (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Element mass concentration (1)
- Element transport (1)
- Elemental analyser (1)
- Elementanalyse (1)
- Elevated temperature (1)
- Ellipsometrie (1)
- Eluates (1)
- Embedded Sensors (1)
- Embedded electronics (1)
- Embedded transducers (1)
- Embedded ultrasonic sensors (1)
- Emergence (1)
- Emergency (1)
- Emerging Pollutants (1)
- Emerging infectious disease (1)
- Emission (1)
- Emission Anisotropy (1)
- Emission chamber (1)
- Emission test method (1)
- Emission testing (1)
- Emissionen (1)
- Emissivity (1)
- Emisssivity (1)
- Empirical mode decomposition (1)
- Enamel (1)
- Enantiomeric excess ee (1)
- Encapsulation process (1)
- Encoding (1)
- End crater (1)
- Endocrine disruption (1)
- Endokriner Disruptor (1)
- Endurance Limit (1)
- Endurance limit (1)
- Energetic Materials (1)
- Energy Conversion (1)
- Energy Engineering and Power Technology (1)
- Energy consumption (1)
- Energy discrimination (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy dispersive X-ray spectroscopy (EDX) (1)
- Energy labelling (1)
- Energy materials (1)
- Energy-dispersive x-ray spectroscopy (1)
- Engineered barrier (1)
- Engineered barrier system (1)
- Engineered barrier systems (1)
- Engineering (1)
- Engineering data (1)
- Engineering egress data (1)
- Enhanced Imaging (1)
- Enhancement strategy (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Entropy noise (1)
- Environmental Engineering (1)
- Environmental Science (1)
- Environmental analysis (1)
- Environmental assessment (1)
- Environmental evaluation (1)
- Environmental impact (1)
- Environmental impact categories (1)
- Environmental influence (1)
- Environmental pollutants (1)
- Environmental simulations (1)
- Environmental speciation (1)
- Enzyme (1)
- Enzyme activity (1)
- Enzyme-Linked Immunosorbent Assay (1)
- Epimerization (1)
- Epitaxial thin films (1)
- Epoxies (1)
- Epoxy conversion degree (1)
- Equation of state (1)
- Equilibrium relaxation (1)
- Equivalent circuit (1)
- Ergopeptide (1)
- Ermüdung (1)
- Erosion (1)
- Error correction (1)
- Error sources analysis (1)
- Ersatzbaustoff (1)
- Estimation (1)
- Estrogen (1)
- Estrogen receptor (ER) (1)
- Estrogens (1)
- Etherification (1)
- Ethylene-vinyl acetate (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- Eu (1)
- European Metrology Networks (EMNs) (1)
- European Reference Material (1)
- European funding strategies (1)
- European project (1)
- European regulation (1)
- Eurotiomycetes (1)
- Eutectic (1)
- Evacuation (1)
- Evaporite deposits (1)
- Ex vivo (1)
- Ex-situ (1)
- Ex-situ X-ray computed tomography (1)
- Exchange interaction (1)
- Exchange length (1)
- Excimers (1)
- Excitation (1)
- Excitation forces (1)
- Excited states (1)
- Exergie (1)
- Exhaust (1)
- Existing Concrete Structures (1)
- Existing structure (1)
- Existing structures (1)
- Exocytosis (1)
- Expansion (1)
- Experiment (1)
- Experimental (1)
- Experimental and numerical techniques (1)
- Experimental determination (1)
- Experimental procedure (1)
- Expert system (1)
- Explosion limit (1)
- Explosionsschutz (1)
- Explosive welding (1)
- Explosiven (1)
- Explosives (1)
- Explosives detection (1)
- Exposure (1)
- Exposure modeling (1)
- Extended X-ray absorption fine structure (EXAFS) (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extracellular polymeric substances (1)
- Extractable organic fluorine (1)
- Extractable organically bound fluorine (EOF) (1)
- Extraction (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremotolerance (1)
- F pili (1)
- F-N-diagram (1)
- FAIR Data Management (1)
- FAIR data (1)
- FAIR research data management (1)
- FAIRification (1)
- FAME (1)
- FAT class (1)
- FEFF (1)
- FEM Simulation (1)
- FEM simulation (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FIB patterning (1)
- FIB/SEM slice and view (1)
- FLASH effect (1)
- FMEA (1)
- FSDC (1)
- FT-IR (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Fabrication parameters (1)
- Facade (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Factor analysis (1)
- Failure mechanisms (1)
- False-positive results (1)
- Faraday cup aerosol electrometer (1)
- Farben (1)
- Fast scanning calorimetry (1)
- Fatigue Strength (1)
- Fatigue behavior (1)
- Fatigue crack growth (1)
- Fatigue crack propagation (1)
- Fatigue life (1)
- Fatigue limit (1)
- Fatigue properties (1)
- Fe (1)
- Fe-Ni oxides (1)
- Fe3Al (1)
- FeNi (1)
- Feature selection (1)
- Feedstock powder (1)
- Femtosecond laser patterning (1)
- Femtosecond laser-processing (1)
- Fenton (1)
- Fenton Reaction (1)
- Fenton-like reaction (1)
- Fenton’s reagent (1)
- Fermi resonance (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic steels (1)
- Ferritic/martensitic steel (1)
- Ferritic–martensitic steel (1)
- Ferroelectret (1)
- Ferroelectric (1)
- Ferroelectricity/ferroelectric materials (1)
- Ferroic cooling (1)
- Ferromagnetic steel (1)
- Ferrous phosphate hydrate (1)
- Festkörperphysik (1)
- Festschrift (1)
- Fetal bovine serum (1)
- Fiber Bragg grating (1)
- Fiber Bragg gratings (1)
- Fiber characterization (1)
- Fiber optic (1)
- Fiber optic sensing (1)
- Fiber optic sensor (1)
- Fiber structuring (1)
- Fiber toxicology (1)
- Fiber-optic sensing (1)
- Fiber-reinforced concrete (1)
- Fiberoptic sensors (1)
- Fibre bragg grating (1)
- Fibre optic sensors (1)
- Field of view (1)
- Field test (1)
- Filler wire (1)
- Filler wire mixing (1)
- Film thickness (1)
- Filter (1)
- Filter effects (1)
- Filtration (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (1)
- Finite element (FE) (1)
- Finite element method (FEM) (1)
- Finite elements (1)
- Finite-element analysis (1)
- Finow Canal (1)
- Fire retardancy (1)
- Fire retardant (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Firing (1)
- First derivative (1)
- Fishmeal (1)
- Fixation (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flange width (1)
- Flash DSC (1)
- Flash thermography (1)
- Flask method (1)
- Flat bottom holes (1)
- Flaw detection (1)
- Flexible (1)
- Flexible Magnetic Sensors (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible magnetic field sensors (1)
- Flexible polyurethane foam (1)
- Flexible waveguide (1)
- Flexible wheelset (1)
- Flexural rigidity (1)
- Floor heating (1)
- Flourescence (1)
- Flourescin (1)
- Flow injection immunoassay (1)
- Flow system (1)
- Flow-through columns (1)
- Fluidic devices (1)
- Fluor-Substitution (1)
- Fluorescein (1)
- Fluorescence Polarization (1)
- Fluorescence label (1)
- Fluorescence life time (1)
- Fluorescence spectroscopy (1)
- Fluorescence standard (1)
- Fluorescent dyes (1)
- Fluorescent markers (1)
- Fluorescent microscopy (1)
- Fluorescent optical fiber (1)
- Fluorescent probes (1)
- Fluorescent sensors (1)
- Fluoride catalyst (1)
- Fluoride phosphate glasses (1)
- Fluorination (1)
- Fluorine coordination (1)
- Fluoroacetic acid (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorophilic interactions (1)
- Flux balance analysis (1)
- Flying line thermography (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Flüssigwasserstoff (1)
- Foam (1)
- Foams (1)
- Folding chirality (1)
- Food Science (1)
- Food fermentation (1)
- Food safety (1)
- Force-distance-curve (1)
- Forest fires (1)
- Formation (1)
- Formation enthalpy (1)
- Formic acid (1)
- Fourier transform spectroscopy (1)
- Fow injection analysis (1)
- Fractals (1)
- Fractography (1)
- Fracture Mechanics (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Fragility (1)
- Fragmentation (1)
- Fragmentation pathway (1)
- Frameshift (1)
- Free electron laser (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Freezing (1)
- Freilandtest (1)
- Freisetzung (1)
- Frequency Drift (1)
- Frequency domain (1)
- Fresnoite (1)
- Friction braking (1)
- Friction stir welding (1)
- Front-runner (1)
- Frost salt attack (1)
- Fs-inscription (1)
- Fuel (1)
- Fuel Technology (1)
- Fuel cell (1)
- Fuel consumption (1)
- Fuel sorption (1)
- Fuell cells (1)
- Full notch creep test (1)
- Full-field phase tomography (1)
- Fullerene (1)
- Fullerite (1)
- Fully aromatic frameworks (1)
- Functional Materials (1)
- Functional determinants (1)
- Functional fatigue (1)
- Functional group quantification (1)
- Functional monomers (1)
- Functional properties (1)
- Functionality (1)
- Functionalization of fullerenes (1)
- Functionally graded porous structure (1)
- Fungal cell-walls (1)
- Fungicide (1)
- Fungus (1)
- Funtional Groups (1)
- Furan derivatives (1)
- Furniture (1)
- Fusarium (1)
- Fusarium mycotoxin (1)
- Fusion zone size (1)
- Future‑oriented standards (1)
- G quadruplex (1)
- G quadruplexes (1)
- GC-MS (1)
- GC/MS (1)
- GC/MS-MS (1)
- GDL (1)
- GE-XANES (1)
- GF-MAS (1)
- GMAW (1)
- GNBP-2 (1)
- GPR (1)
- GPS data (1)
- GPU Parallel computing (1)
- GUR (1)
- Gadolinium-based contrast agent (1)
- Gadovist (1)
- Galvanic anodes (1)
- Galvanized steel (1)
- Gamma (1)
- Gamma radiation monitoring (1)
- Gamma ray (1)
- Gamma-hydroxybutyric acid (1)
- Gas adsorption (1)
- Gas calibration (1)
- Gas condensing boiler (1)
- Gas dispersion (1)
- Gas distribution mapping (1)
- Gas emission (1)
- Gas evolution (1)
- Gas flow assisted powder deposition (1)
- Gas sensing (1)
- Gas sorption (1)
- Gas tomography (1)
- Gas transport in porous media (1)
- Gas-sensitive micro-drone (1)
- Gasoline (1)
- Gated materials (1)
- Gd-DOTA (1)
- Gd3+ (1)
- Gefahrgutverpackungen (1)
- Gefährdungs- und Risikobeurteilung (1)
- Gel-bound Colorants (1)
- Gelartige Elektrolyte (1)
- Gemcitabine (1)
- Gene expression (1)
- Gene five protein (1)
- General Chemical Engineering (1)
- General Computer Science (1)
- General Energy (1)
- General Engineering (1)
- General Environmental Science (1)
- General Physics and Astronomy (1)
- General analytical solutions (1)
- Genetics (1)
- Genome (1)
- Genome annotation (1)
- Genome sequence (1)
- Genome sequencing (1)
- Genomics (1)
- Genotoxicity testing (1)
- Geocomposite drain (1)
- Geoenvironmental engineering (1)
- Geographical origins (1)
- Geogrid (1)
- Geological material (1)
- Geometric Phase (1)
- Geometric deep learning (1)
- Geometric phase (1)
- Geometric phase measurement (1)
- Geometric vehicle and track irregularities (1)
- Geometrical deviation (1)
- Geometrical factors (1)
- Geometrical magnification (1)
- Geopolymers (1)
- Geosciences (1)
- Geotextile (1)
- Geothermal environment (1)
- Gepulste Ramanspektrometer (1)
- Germanium chlorides (1)
- Gesteuerte Freisetzung (1)
- Gesteuerte Materialien (1)
- Gesteuerten Nanopartikeln (1)
- Geteilte Infrastruktur (1)
- Ggadolinium (1)
- Giant magneto resistance (1)
- Giant magneto resistance (GMR) (1)
- Gilding (1)
- Gips (1)
- Github (1)
- Glasmonolith (1)
- Glass Support (1)
- Glass fiber reinforced polymer (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass scintillator (1)
- Glass transition temperature (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Gleeble experiments (1)
- Gleisoberbau (1)
- Global ambient vibrations (1)
- Global hydrogen market (1)
- Global radiation (1)
- Globally harmonized system of classification and labelling of chemicals (1)
- Glycerol (1)
- Glycolide (1)
- Gnomonic projections (1)
- Goal-oriented (1)
- Gold nanocluster (1)
- Gold nanoparticles (1)
- Gold-Katalyse (1)
- Governance (1)
- Grafting (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary engineering (1)
- Grain boundary precipitates (1)
- Grain boundary sliding (1)
- Grain growth (1)
- Grain orientation (1)
- Grain structure (1)
- Granite (1)
- Granules (1)
- Graph databases (1)
- Graph learning (1)
- Graphen Oxide (1)
- Graphene Oxide (1)
- Graphene template (1)
- Graphene-based material (GBM) (1)
- Graphene-based polyglycerol sulfates (1)
- Graphical model (1)
- Graphite (1)
- Graphite furnace (1)
- Graphite induced hysteresis (1)
- Grass pollen (1)
- Grating interferometry (1)
- Grating method (1)
- Gravity response (1)
- Green facades (1)
- Green light excitation (1)
- Green urban construction (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Grinding (1)
- Ground Penetrating Radar (1)
- Ground motion detection (1)
- Ground water (1)
- Groundwater (1)
- Group profile (1)
- Grouts (1)
- Growth rate (1)
- Growth-rate homeostasis (1)
- Guanidinium receptors (1)
- Guided Waves (1)
- Guided waves (1)
- Gurson model (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Gyroid lattice (1)
- H2O2 (1)
- HAZ-softening (1)
- HCF (1)
- HEA (1)
- HERFD-XAS (1)
- HF (1)
- HF free Digestion (1)
- HF-shuttle (1)
- HIgh entropy, (1)
- HNBR (1)
- HPLC-DAD/FLD (1)
- HPLC/MS/MS technique (1)
- HPSEC (1)
- HR-CS-MAS (1)
- HTMS (1)
- Hackathon (1)
- Hafnium (1)
- Half-Cell Potential Mapping (1)
- Halloysite nanotubes (1)
- Halogen-free (1)
- Halogenation (1)
- Hammer impact (1)
- Hard Carbon (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Hard metal (1)
- Hard metals (1)
- Hard x-ray photoelectron spectroscopy (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Hardly separable problem (1)
- Harmful algal bloom (1)
- Harmful algal blooms (1)
- Harsh environment (1)
- Hartmann effect (1)
- Hastelloy X (1)
- Hausmüllverbrennungsasche (1)
- Hay fever (1)
- Hazard assessment (1)
- Hazardous chemicals (1)
- Haze Samples (1)
- Hazenite (1)
- Health monitoring (1)
- Healthcare (1)
- Heart attack (1)
- Heat Treatment (1)
- Heat capacity (1)
- Heat flow (1)
- Heat maps (1)
- Heat of combustion (1)
- Heat pump (1)
- Heat release (1)
- Heat source models (1)
- Heat-affected zone (1)
- Heat-transfer Measurements (1)
- Heating oil with 10 % FAME (1)
- Heavy chains (1)
- Heavy gas (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Hemihydrate (1)
- Hepatocellular carcinoma (1)
- Herbaspirillum seropedicae (1)
- Herpotrichiellaceae (1)
- Heterodyning (1)
- Heusler alloys (1)
- HexaHis-Tag (1)
- Hexachlorodisilane (1)
- Hexagonally-arranged nano-protrusions (1)
- Hi-Tension (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High - temperature (1)
- High Cycle Fatigue (1)
- High Entropy Alloys (1)
- High density polyethylene (1)
- High ductility (1)
- High energy beam welding (1)
- High energy radiography (1)
- High heat resistance (1)
- High pH (1)
- High power laser beam welding (1)
- High pressure (1)
- High pressure experiments (1)
- High process speeds (1)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (1)
- High temperature corrosion (1)
- High temperature oxidation (1)
- High temperatures (1)
- High throughput screening (1)
- High voltage cable accessories (1)
- High-Entropy Alloys (1)
- High-Speed (1)
- High-Speed Separations (1)
- High-energy X-ray imaging (1)
- High-entropy alloy (1)
- High-fired gypsum (1)
- High-fired gypsum mortar (1)
- High-frequency arc discharge (1)
- High-precision nail penetration (1)
- High-pressure (1)
- High-pressure hydrogen environment (1)
- High-resolution (1)
- High-resolution continuum source graphite furnace atomic absorption spectrometry (1)
- High-resolution continuum source molecular absorption spectrometry (1)
- High-resolution transmission in SEM (TSEM) (1)
- High-rise building (1)
- High-strength filler metals (1)
- High-strength low-alloy steel (1)
- High-strength steel filler metal (1)
- High-strength steels (1)
- High-temperature ceramics (1)
- High-temperature corrosion (1)
- High-temperature polymer electrolyte membrane fuel cell (1)
- High-voltage testing (1)
- Highly reinforced concrete (1)
- Highspeed (1)
- High‐nitrogen steel (1)
- High‐temperature corrosion (1)
- Hilbert transform (1)
- His6 (1)
- His8 (1)
- Histidine (1)
- Hochfester Stahl (1)
- Hofmeister effect (1)
- Hollow Specimen Technique (1)
- Hollow specimen (1)
- Hollow specimen technique (1)
- Holzschutzmittel (1)
- Homogenization (1)
- Homogenization schemes (1)
- Honeybee (1)
- Honeycombing (1)
- Horizontal wind turbine (1)
- Horizontally polarized shear waves (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host guest molecules (1)
- Hot cracking test (1)
- Hot disc method (1)
- Hot electrons (1)
- Hot isostatic pressing (1)
- Hot pressing (1)
- Hot storage (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Hot-electrons (1)
- Human Plasma (1)
- Human error (1)
- Human factors (1)
- Human fibroblast growth factors (1)
- Human health (1)
- Human leukocyte antigen (HLA) (1)
- Human papillomavirus (1)
- Human serum albumin (1)
- Humic matter (1)
- Humidity sensing (1)
- Humidity sensor (1)
- Hunting phenomenon (1)
- Hybrid Laser arc Welding (1)
- Hybrid Manufacturing (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hybrid composite pressure vessel (1)
- Hybrid manufacturing (1)
- Hybrid monte carlo (1)
- Hybrid repair (1)
- Hydrated DNA (1)
- Hydrated electron (1)
- Hydrated silicate melts (1)
- Hydration shell (1)
- Hydration stoppage (1)
- Hydrocarbons (1)
- Hydrochemical evolution (1)
- Hydrochloric acid (1)
- Hydrodynamic chromatography (HDC) (1)
- Hydrodynamic model (1)
- Hydrofluorination (1)
- Hydrogarnet (1)
- Hydrogel (1)
- Hydrogen Storage (1)
- Hydrogen Transfer Film (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen bonding (1)
- Hydrogen diffusion (1)
- Hydrogen economy (1)
- Hydrogen measurement (1)
- Hydrogen permeation (1)
- Hydrogen policies (1)
- Hydrogen reduction (1)
- Hydrogen safety (1)
- Hydrogen storage tank (1)
- Hydrogen supply (1)
- Hydrogen uptake reproducibility (1)
- Hydrogen-containing gas mixture (1)
- Hydrogenasen (1)
- Hydrogenated nanostructures (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrometallurgie (1)
- Hydrophilicity (1)
- Hydrophobic interaction chromatography (1)
- Hydrothermal Ageging (1)
- Hydrothermal fluid (1)
- Hydrothermal treatment (1)
- Hydrous glass (1)
- Hydroxy warfarin (1)
- Hydroxylellestadite (1)
- Hygienic behavior (1)
- Hygromycin resistance (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hypermutation (1)
- Hyperthermia (1)
- Hystersis (1)
- I-shape sections (1)
- IAPV (1)
- IBESS (1)
- IBESS Approach (1)
- ICP-MS/MS (1)
- ICP-TOFMS (1)
- ICP-ToF-MS (1)
- ID-MS (1)
- IEPE (1)
- ILC (1)
- IMAC purification (1)
- IN 718 (1)
- IN725 (1)
- INCONEL 718 (1)
- IR (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- IRHD microhardness (1)
- ISO 12108 (1)
- ISO 16000-6 (1)
- ISO 22196 (1)
- ISO 9223 (1)
- ISO REMCO (1)
- ISRU (1)
- Icing conditions (1)
- Identification (1)
- Identification and quantification of additives (1)
- Identity (1)
- IgE (1)
- IgG determination (1)
- IgY (1)
- Ignition (1)
- Ignition sources (1)
- Illite (1)
- Image evaluation (1)
- Image processing (1)
- Image reconstruction (1)
- Image registration (1)
- Image segmentation (1)
- Imaging AES (1)
- Imaging SIMS (1)
- Imaging Technique (1)
- Imaging XPS (1)
- Imaging ellipsometry (1)
- Imaging technique (1)
- Imidazole (1)
- Immersion oil (1)
- Immobilisierung (1)
- Immunassay (1)
- Immunglobulin (1)
- Immunglobuline (1)
- Immunity (1)
- Immunoarray (1)
- Immunoassays (1)
- Immunoglobulin E (1)
- Immunohistochemistry (1)
- Immunology (1)
- Immunometric assay (1)
- Immunometric biosensor (1)
- Immunoprecipitation (1)
- Impact (1)
- Impact Absorbed Energy (1)
- Impact Sensitivity (1)
- Impact damage (1)
- Impact echo (1)
- Impact of standards (1)
- Imperceptible electronics (1)
- Implant material (1)
- Implants (1)
- Imprinting (1)
- Impurites (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ atomic force microscopy (1)
- In situ studies (1)
- In situ synchrotron x-ray diffraction (1)
- In situ synthesis (1)
- In situ tensile test (1)
- In vivo (1)
- In-air ranging (1)
- In-house calibration solution (1)
- In-line Monitoring (1)
- In-process monitoring (1)
- In-situ ED-XRD (1)
- In-situ SAXS/WAXS (1)
- In-situ SEM micro shear deformation (1)
- In-situ analysis (1)
- In-situ diffraction (1)
- In-situ phase analysis (1)
- In-situ process monitoring (1)
- In-situ scattering (1)
- In-situ tensile test (1)
- In-situ testing (1)
- Inca (1)
- Inclination angle (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Indenter modulus (1)
- Independent test method (1)
- Indicator displacement assay (1)
- Indicators (1)
- Indirect combustion noise (1)
- Indirect damage (1)
- Individual cell tracking (1)
- Indoor mycobiome (1)
- Induced polarization (1)
- Induction heating (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inductively coupled plasma mass spectroscopy (1)
- Inductively‑coupled mass spectrometry (1)
- Industrial CT (1)
- Industrial application (1)
- Industrial applications (1)
- Industrial gypsum (1)
- Industrial leak testing (1)
- Industrial safety (1)
- Industrie 4.0 (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Inelastic background (1)
- Inert gases (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infectious diseases (1)
- Information Security (1)
- Information Systems (1)
- Information carrier (1)
- Information security management system (ISMS) (1)
- Infraleichtbeton (1)
- Infrared nano AFM (1)
- Infrastructure monitoring (1)
- Infrastruktur (1)
- Inhibition (1)
- Ink (1)
- Ink corrosion (1)
- Inkjet (1)
- Inline Analytics (1)
- Innovation (1)
- Inorganic arsenic (1)
- Inorganic chemical analysis (1)
- Inorganic impurities (1)
- Insecticide (1)
- Inspection design and planning (1)
- Instantaneous wavenumber analysis (1)
- Institutional theory (1)
- Instrumental isotope fractionation (1)
- Instumented indentation test (1)
- Insulation (1)
- Integrated alignment features (1)
- Intellectual property rights (IPR) (1)
- Intelligent control (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter-comparison (1)
- Inter-laboratory comparison (1)
- Inter-laboratory test (1)
- Inter-layer time (1)
- Interactions (1)
- Intercomparison (1)
- Interface salt-concrete / rock salt (1)
- Interfaces (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial strength (1)
- Interferometric spectroscopy (1)
- Interferometry (1)
- Intergranular strain (1)
- Interlaboratory comparability (1)
- Interlaboratory study (1)
- Interlaboratory test (1)
- Intermittent microplasticity (1)
- Intermixing (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Internal friction (1)
- Internal standard (1)
- Internal stresses (1)
- Internet of Things (1)
- Interoperability (1)
- Interpenetrating polymer network (1)
- Interphase residual stress (1)
- Interpretable machine learning (1)
- Intra-plant isotope variability (1)
- Intrinsic OER activity (1)
- Intrinsic stress (1)
- Intrinsically conducting polymers (1)
- Intumescent additives (1)
- Invar (1)
- Inverse Design (1)
- Inverse Problem (1)
- Inverse analysis (1)
- Inverse design techniques (1)
- Inverted classroom (1)
- IoT (1)
- Ion beam therapy (1)
- Ion mobility spectrometry (1)
- Ion-exchange membranes (1)
- Ionic Liquid Crystals (1)
- Ionic liquids (1)
- Ionic porosity (1)
- Ionic stregth (1)
- Ionisation (1)
- Ionophore (1)
- Ionophore antibiotics (1)
- Iposomes (1)
- Iridium (1)
- Iridium oxide (1)
- Iron aluminide (1)
- Iron carbide (1)
- Iron gall ink (1)
- Iron nanoparticles (1)
- Iron nanophases (1)
- Iron nitride (1)
- Iron oxides (1)
- Iron reducing bacteria (1)
- Iron scrap (1)
- Iron-oxo oligomers (1)
- Irradiation geometry (1)
- Isothermal nucleic acid amplification (1)
- Isotope Dilution (1)
- Isotope Labelling (1)
- Isotope amount ratio (1)
- Isotope delta value (1)
- Isotope dilution analysis (1)
- Isotope dilution mass spectrometry (1)
- Isotope fractionation (1)
- Isotope mixture (1)
- Isotope reference material (1)
- Isotope-labeled (1)
- Isotopic analysis (1)
- Isotopic fractionation (1)
- Isotopologue Distribution (1)
- Issues (1)
- Iterative method (1)
- Iterative real-time optimization (1)
- Iterative reconstruction (1)
- JMAK model (1)
- Jacobsen-Stockmayer theory (1)
- Jahrestag (1)
- Janus dendrimers (1)
- Jet grout (1)
- Job plot (1)
- Joining dissimilar materials (1)
- Joining technology (1)
- Joint grouts (1)
- K-feldspar (1)
- K-nearest neighbor (1)
- KCl (1)
- Kaolinite (1)
- Kernel average misorientation (1)
- Keyhole collapse (1)
- Keyhole dynamics (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Kikuchi diffraction (1)
- Kinetic study (1)
- Kinetics from experiments (1)
- Kitagawa-Takahashi diagram (1)
- Kjeldahl (1)
- Klassifizierung (1)
- Klimaveränderung (1)
- Knock-out mutant (1)
- Knoevenagel condensation (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge Use (1)
- Knowledge and technology transfer (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Knowledge spillovers (1)
- Knudsen Effusion Mass Spectrometry (KEMS) (1)
- Knudsen diffusion (1)
- Koffein (1)
- Kohäsionsenergie (1)
- Kompost (1)
- Korrosion (1)
- Korynetes caeruleus (1)
- Kosmotrope (1)
- Kramers-Kronig detector (1)
- Kreislaufwirtschaft (1)
- Kumulierter Exergieaufwand (1)
- L-PBF IN718 material (1)
- L-lactide (1)
- LA-ICP-MS based immunoassays (1)
- LA/ICP-MS Imaging (1)
- LBM-DEM (1)
- LC-UV (1)
- LC-UV absorbance (1)
- LC/HRMS (1)
- LC/MS-MS (1)
- LCA (1)
- LCC (1)
- LCF (1)
- LET (1)
- LFIA (1)
- LIBS TIG welding (1)
- LL equation (1)
- LLG (1)
- LMD (1)
- LN2 cooling (1)
- LSFD (1)
- LSVEC (1)
- LTCC (1)
- LTT filler metal (1)
- LTT weld filler materials (1)
- Lab-on-a-Chip (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Laboratory 4.0 (1)
- Laboratory breeding (1)
- Laboratory energy-dispersive X-ray diffraction (EDXRD) (1)
- Laccase (1)
- Lache (1)
- Lack-of-fusion (1)
- Lactide (1)
- Lacunae (1)
- Lacunary Keggin ion (1)
- Ladder sequencing (1)
- Laminar burning velocity (LBV) (1)
- Laminate design (1)
- Laminated metallic composites (1)
- Laminates (1)
- Lamé curves (1)
- Landau Lifshitz Gilbert equation (1)
- Landau Lifshitz equation (1)
- Landau de-Gennes analysis (1)
- Landfill capping system (1)
- Landslide propagation modelling (1)
- Langmuir isotherm (1)
- Lanthanoide (1)
- Large Aperture Ultrasonic System (1)
- Large Language model (1)
- Large components (1)
- Large test fecility (1)
- Large volume samplers (1)
- Large-pore (1)
- Large-scale tests (1)
- Lasalocid (1)
- Laser Ablation (1)
- Laser Ablation ICP-MS (1)
- Laser Doppler Vibrometer (1)
- Laser Infrared thermography (1)
- Laser Machining (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Processing (1)
- Laser Thermography (1)
- Laser Welding (1)
- Laser ablation ICP-MS (1)
- Laser ablation-inductively coupled plasma-mass spectrometry (1)
- Laser ablation-inductively coupled plasma-mass spectroscopy (1)
- Laser cladding (1)
- Laser cleaning (1)
- Laser cutting (1)
- Laser damage (1)
- Laser direct writing (1)
- Laser energy absorption (1)
- Laser excitation (1)
- Laser implantation (1)
- Laser induced breakdown Spectrocopy (LIBS) (1)
- Laser induced breakdown spectroscopy (1)
- Laser induced plasma (1)
- Laser induced plasma deposition (1)
- Laser powder-based directed energy deposition (1)
- Laser powder-bed fusion (1)
- Laser scanner optics (1)
- Laser scanning (1)
- Laser welding (1)
- Laser-based additive manufacturing (1)
- Laser-induced breakdown spectroscopy (1)
- Laser-induced dielectric breakdown (LIDB) (1)
- Laser-induced fluorescence (1)
- Laser-induced forward transfer (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Laser-induced slip casting (1)
- Laser-metal-deposition (1)
- Laser-modified surface (1)
- Lastwechsel (1)
- Lateral dynamic displacement (1)
- Lateral resolution (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structure (1)
- Laves phase (1)
- Layer-by-Layer (1)
- Layer-by-layer deposition (1)
- Layered manganese oxide (1)
- Layers (1)
- Layerwise Slurry Deposition (1)
- Layerwise slurry deposition (1)
- Leaching of waste materials (1)
- Leaching test (1)
- Lead (1)
- Lead identification (1)
- Lead-free ceramics (1)
- Leak (1)
- Leak detection (1)
- Leak-tightness (1)
- Leakage rate (1)
- Leakproofness (1)
- Leakproofness test (1)
- Leather waste (1)
- Lecture films (1)
- Legacy pollution (1)
- Leichtgranulate (1)
- Lewis Acid (1)
- Lewis superacids (1)
- Lewis/Bronsted (1)
- Li dendrites (1)
- Li dendrites penetration mechanisms (1)
- LiFePO4 (1)
- LiYF4 (1)
- Library (1)
- Library and Information Sciences (1)
- Life cycle (1)
- Life history data (1)
- Life science (1)
- Life-cycle assessment (1)
- Life-cycle costing (1)
- Lifetime encoding (1)
- Lifetime-encoded beads (1)
- Ligand analysis (1)
- Ligandsubstitution (1)
- Light chain (1)
- Light chains (1)
- Light curing (1)
- Light harvesting (1)
- Light-harvesting (1)
- Lightweight structures (1)
- Lignin (1)
- Lignin modification (1)
- Lignocellulose (1)
- Lignosulfonates (1)
- Limestone powder (1)
- Limit of acceptable consequence (1)
- Limited data (1)
- Lindemann criterion (1)
- Linear array (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Linker (1)
- Lipid Nanodiscs (1)
- Lipidomics (1)
- Lipids (1)
- Liquefied Hydrogen (1)
- Liquefied Natural Gas (1)
- Liquefied hydrogen (1)
- Liquefied natural gas (1)
- Liquid Crystal (1)
- Liquid chromatography (1)
- Liquid crystal (1)
- Liquid-liquid-phase-separation (1)
- Liquid-metal embrittlement (1)
- Literature survey (1)
- Lithium Ion Batteries (1)
- Lithium aluminosilicates (1)
- Litium Ion Cells (1)
- Liver X receptor (1)
- Lluminescence (1)
- Load identification (1)
- Load tests (1)
- Load transfer (1)
- Local Weld Geometry (1)
- Local approaches (1)
- Local corrosion (1)
- Local critical strain (1)
- Local fatigue spproaches (1)
- Local resonance (1)
- Local wavenumber analysis (1)
- Localised corrosion (1)
- Localization (1)
- Localized laser dispersing (1)
- Localized model order reduction (1)
- Localized surface plasmon resonance (1)
- Long term monitoring (1)
- Long-term aging (1)
- Long-term requirements (1)
- Longst luminescence lifetime (1)
- Lonic liquid (1)
- Lorentz force (1)
- Lorentz forces (1)
- Loss (1)
- Low Transformation Temperature filler wire (1)
- Low blow (1)
- Low cycle fatigue (1)
- Low transformation temperature filler wire (1)
- Low-carbon construction (1)
- Low-cycle fatigue (1)
- Low-energy electrons (1)
- Low-frequency shaker (1)
- Low-loading (1)
- Luftgüte (1)
- Luftverschmutzung (1)
- Luminescent lifetime (1)
- Lumineszenz (1)
- Luminol (1)
- Lunar regolith (1)
- Lupolen (1)
- Lymnaea stagnalis (1)
- Lysergic acid hydrazide (1)
- Lysosome (1)
- Lysozyme (1)
- L‐PBF (1)
- M-N-C catalysts (1)
- MALDI-TOF MS/MS (1)
- MALDI-TOF-MS (1)
- MATLAB (1)
- MC-TIMS (1)
- MCA-modeling (1)
- MCC (1)
- MCNP (1)
- MCR (1)
- MDCK cell (1)
- MDFEM (1)
- MEA (1)
- MESG (1)
- MICAP-MS (1)
- MIMO (1)
- MIP (1)
- MLCT (1)
- MLI (1)
- MOF´s (1)
- MOSH/MOAH (1)
- MR Angiography (1)
- MR imaging (1)
- MRT (1)
- MST (1)
- MSWI bottom ash (1)
- MVT (1)
- MW-AES (1)
- MWIR (1)
- MYCN (1)
- Maceration (1)
- Machine learning optimization (1)
- Machine learning segmentation (1)
- Machine vision (1)
- Machining (1)
- Macroion/growth factor assemblies (1)
- Macrophage (1)
- Macrophages (1)
- Macropores (1)
- Macroscopic stress (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnesium alloys (1)
- Magnesium carbonates (1)
- Magnesium chloride brine (1)
- Magnesium-gadolinium alloy (1)
- Magnet coupling (1)
- Magnetic (1)
- Magnetic Methods (1)
- Magnetic Nanoparticles (1)
- Magnetic alloys (1)
- Magnetic anisotropy (1)
- Magnetic bath support (1)
- Magnetic domains (1)
- Magnetic field (1)
- Magnetic interacion (1)
- Magnetic iron oxide nanoparticle clusters (1)
- Magnetic materials (1)
- Magnetic moment (1)
- Magnetic nanocatalyst (1)
- Magnetic sensor system (1)
- Magnetic sensors (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetic thin films (1)
- Magnetization dynamics (1)
- Magneto-structural transition (1)
- Magnetocaloric effect (1)
- Magnetocaloric materials (1)
- Magnetoeleastic couplin (1)
- Magnetomechanical effect (1)
- Magnetpartikel (1)
- Magnéli phase (1)
- Major transition (1)
- Management science and operations research (1)
- Management system standards (1)
- Manuscript studies (1)
- Map production and publishing (1)
- Mapping (1)
- Mapping for unseparable load (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marine corrosion (1)
- Market access (1)
- Market surveillance (1)
- Martensite (1)
- Martensitic steels (1)
- Maskinteknik (1)
- Mass contents (1)
- Mass loss (1)
- Mass transport (1)
- Mass-Spectrometry (1)
- Massenspektrometrie (1)
- Matching ferritic filler metal (1)
- Material Acceleration Platforms (MAPs) (1)
- Material Moisture (1)
- Material cassification (1)
- Material chemistry (1)
- Material defects (1)
- Material discrimination (1)
- Material efficiency (1)
- Material engineering (1)
- Material science (1)
- Material sciences (1)
- Material synthesis (1)
- Materials Modelling (1)
- Materials Properties (1)
- Materials Science (1)
- Materials Testing (1)
- Materials analysis (1)
- Materials by design (1)
- Materials chemistry (1)
- Materials database (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix (1)
- Matrix influence (1)
- Matter reorganization theories (1)
- McSAS3 (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Measurement Uncertainty (1)
- Measurement campaigns (1)
- Measurement uncertainties (1)
- Measurements (1)
- Mechanical Load (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical analysis (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical characterization (1)
- Mechanical flexibility (1)
- Mechanical loading (1)
- Mechanical mismatching (1)
- Mechanical modelling (1)
- Mechanical response (1)
- Mechanical strength (1)
- Mechanical stress (1)
- Mechanical treatment (1)
- Mechanical waves (1)
- Mechanically flexible crystals (1)
- Mechanicalproperties (1)
- Mechanisms of pathogenesis (1)
- Mechanistic study (1)
- Mechanochemical pictographs (1)
- Mechanochemical synthesis (1)
- Mechanochemically synthesis (1)
- Mechanosensitive channel (1)
- Medical diagnostics (1)
- Medical imaging (1)
- Medicinal application (1)
- Medicine (1)
- Medium entropy alloys (1)
- MefHySto (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melanised microcolonial fungi (MCF) (1)
- Melt dripping (1)
- Melt pool boundary (1)
- Melt pool depth (1)
- Melt pool dynamics (1)
- Melt pool monitoring (1)
- Mercaptans (1)
- Mercury intrusion porosimetry (1)
- Mercury speciation (1)
- Mesh routing (1)
- Meso Portland cement (1)
- Mesocellular foam (1)
- Mesofluidics (1)
- Mesopores (1)
- Mesoporosity (1)
- Mesoporous SiO2-CaO nanoparticles (1)
- Mesoporous Silica (1)
- Mesoporous iridium oxide films (1)
- Mesoporous particles (1)
- Mesoporous phosphate-based glasses (1)
- Mesoporous silica (1)
- Mesoporöse Träger (1)
- Messsysteme (1)
- Messung (1)
- Meta material (1)
- Meta-Omics (1)
- Meta-analysis (1)
- Metabolic Flux (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolization (1)
- Metadata (1)
- Metal Matrix Composite (MMC) (1)
- Metal Organic Frameworks (1)
- Metal additive manufacturing (1)
- Metal carbides (1)
- Metal cluster (1)
- Metal halides (1)
- Metal ions (1)
- Metal magnetic memory (1)
- Metal matrix composite (1)
- Metal matrix composite (MMC) (1)
- Metal matrix composites (1)
- Metal mixing (1)
- Metal nanoparticles (1)
- Metal phosphonates (1)
- Metal recovery (1)
- Metal seals (1)
- Metal toxicity (1)
- Metal uptake (1)
- Metal-organic polyhedra (1)
- Metal-oxides (1)
- Metallic Glass (1)
- Metallic materials (1)
- Metallic matrix pad (1)
- Metallo-supramolecular polyelectrolytes (1)
- Metalloprotein (1)
- Metals (1)
- Metals and alloys (1)
- Metal–organic frameworks (1)
- Metal−organic frameworks (1)
- Metamaterials (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Metathesis (1)
- Metformin (1)
- Methane Oxidation (1)
- Methane removal (1)
- Methane total oxidation (1)
- Methanogen (1)
- Methanogene (1)
- Methanogens (1)
- Methanol oxidation (1)
- Methods of scientific analysis (1)
- Methyl group rotation (1)
- Methylanilines (1)
- Methylmercury (1)
- Metoligotoma (1)
- Metrology in chemistry (1)
- Micelle (1)
- Micro X-ray fluorescence spectroscopy (1)
- Micro heat and power generation (1)
- Micro- and nanocapsules (1)
- Micro-CT (1)
- Micro-CT scanning (1)
- Micro-Raman imaging (1)
- Micro-comuted tomography (µCT) (1)
- Micro-concentrator solar cell (1)
- MicroXRF (1)
- Microalloying influences (1)
- Microarray printing (1)
- Microbe (1)
- Microbe interactions (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbially induced corrosion (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological Corrosion (1)
- Microbiology (1)
- Microchamber (1)
- Microcracks (1)
- Microcystins (1)
- Microencapsulated thermochromic pigments (1)
- Microfabrication (1)
- Microfluidic (1)
- Microfluidic mixing (1)
- Microfluidic system (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Microhardness (1)
- Micromagnetism (1)
- Micromechanical model (1)
- Micromechanical modelling (1)
- Micromechanics (1)
- Micrometeorites (1)
- Micromonospora aurantiaca (1)
- Microorganism (1)
- Micropatterning (1)
- Microplastic analysis (1)
- Microplastic fibers (1)
- Microplastic pathways (1)
- Microplastic pollution (1)
- Microplastic stress (1)
- Microplastic-induced effects (1)
- Microplastics detection (1)
- Microplatic (1)
- Microporous polymers (1)
- Microscope slides (1)
- Microspheres (1)
- Microstrain distribution (1)
- Microstructure evolution (1)
- Microstructured fibers (1)
- Microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) (1)
- Microwave synthesis (1)
- Microwave-assisted synthesis (1)
- Middle Pleistocene (1)
- Mild steels (1)
- Miller and Urey (1)
- Millipedes (1)
- Mineral (1)
- Mineral identification (1)
- Mineral oil hydrocarobons (1)
- Mineral paragenesis (1)
- Minerals (1)
- Miniaturization (1)
- Minimally-invasive parapatellar approach (1)
- Minimum Waiting Time (1)
- Minimum burst pressure (1)
- Minimum energy performance standards (1)
- Mining head gear (1)
- Misalignment of edges (1)
- Misfitting precipitate (1)
- Missing fragmentation sites (1)
- Missing wedge (1)
- Mitigation strategies (1)
- Mix-design (1)
- Mixed Inks (1)
- Mixed conductors (1)
- Mixed metal oxide (1)
- Mixed surface (1)
- Mixed-ligand MOFs (1)
- Mixing procedure (1)
- Mn-oxides (1)
- MoO3 (1)
- MoS2 (1)
- Mobile analytics (1)
- Mobile phase (1)
- Mobile robot olfaction (1)
- Mobiles LIBS (1)
- Mobility particle size spectrometer (MPPS) (1)
- Modal analysis (1)
- Modal parameters (1)
- Model Predictive Control (1)
- Model aerosols (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modellierung (1)
- Modelling studies (1)
- Modern (1)
- Modification of structural morphology (1)
- Modified U-Net architectures (1)
- Modified mycotoxins (1)
- Modifier adaptation (1)
- Moisture content (1)
- Moisture distribution (1)
- Moisture measurements (1)
- Molar extinction coefficient determination (1)
- Molecular Biology (1)
- Molecular MRI (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular identification (1)
- Molecular imprinted polymers (1)
- Molecular marker (1)
- Molecular mass distribution (1)
- Molecular recognition at interfaces (1)
- Molecular sieves (1)
- Molecular spectra (1)
- Molecular-MRI (1)
- Molecule (1)
- Molten pool (1)
- Monensin (1)
- Monitoring strategy (1)
- Monoclonal Antibodies (1)
- Monoclonal Antibody (1)
- Monoclonal antibodies (1)
- Monoklonal (1)
- Monolith (1)
- Monomer (1)
- Monopile support structure (1)
- Monte Carlo algorithm (1)
- Moon (1)
- Morphological image analysis (1)
- Mortar method (1)
- Mounting media (1)
- Mounting medium (1)
- Movement characteristics (1)
- MscS (1)
- Multi photon lithography (1)
- Multi-Offset Array (1)
- Multi-beam track model (1)
- Multi-collector inductively coupled plasma-mass spectrometry (ICP-MS) (1)
- Multi-dimensional reconstruction (1)
- Multi-element analysis (1)
- Multi-energy CT (1)
- Multi-hop (1)
- Multi-materials joining (1)
- Multi-omics (1)
- Multi-phase materials (1)
- Multi-physical modelling (1)
- Multi-principal element alloy (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multi-sample analysis (1)
- Multi-sensor (1)
- Multi-sensor approach (1)
- Multiaxial deformation (1)
- Multicellularity (1)
- Multidimensional technology adoption (1)
- Multifuncitonal material systems (1)
- Multigene phylogeny (1)
- Multilayer Insulation (1)
- Multilayer graphene (1)
- Multilayercoatings (1)
- Multilayers (1)
- Multilaysers (1)
- Multilocus phylogeny (1)
- Multimodal analysis (1)
- Multiple Displacement Amplification (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- Multiple sclerosis (1)
- Multiple-injection sample-standard bracketing (1)
- Multiple-layered scaffold (1)
- Multiplexed assay (1)
- Multiport (1)
- Multiscale methods (1)
- Multivalency (1)
- Multivariat (1)
- Multivariate (1)
- Multivariate analyses (1)
- Multivariate evaluation (1)
- Multivariate methods (1)
- Multi‐component diffusion (1)
- Muon (1)
- Murchison meteorite (1)
- Mushrooms (1)
- Mussel-inspired adhesive systems (1)
- Mussel-inspired adhesives (1)
- Mussel-inspired materials (1)
- MySpot (1)
- Mycoplasma (1)
- Mössbauer (1)
- Mössbauer Spectroscopy (1)
- Mössbauer spectroscopy (1)
- Mössbauer study (1)
- Müllverbrennung (1)
- M−N/Cs (1)
- N2-stripping (1)
- NAT (1)
- NDE (1)
- NGS (1)
- NH3-TPD (1)
- NHS (1)
- NHS-Ester (1)
- NIR Spectroscopy (1)
- NIR dyes (1)
- NIR imaging (1)
- NIR-I (1)
- NIR-II fluorescence (1)
- NIST (1)
- NIST-mAb 8671 (1)
- NMC Cathode (1)
- NMF (1)
- NMR Spectroscopy (1)
- NMR-Spektroskopie (1)
- NSE (1)
- NaI (1)
- Nachrechnung (1)
- Nanaoparticle (1)
- Nanaoparticles (1)
- Nano Particles (1)
- Nano particles (1)
- Nano-carrier (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-materials (1)
- Nano-powder (1)
- NanoCAM (1)
- Nanocarrier (1)
- Nanocasting (1)
- Nanocluster (1)
- Nanoconfinement (1)
- Nanocorrosion of aluminium and silicon (1)
- Nanodosimetry (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanofibers (1)
- Nanoinformatics (1)
- Nanolenses (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial design (1)
- Nanomaterial legislation (1)
- Nanomaterial regulation (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanomechanics (1)
- Nanon (1)
- Nanoparticle characterization (1)
- Nanoparticle dimers (1)
- Nanoparticle synthesis (1)
- Nanopatricle (1)
- Nanophotonics (1)
- Nanoplatform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanoporous carbon (1)
- Nanopowder (1)
- Nanopropous materials (1)
- Nanosafety (1)
- Nanosafety (Safe-by-design) (1)
- Nanosciences (1)
- Nanostructure quantification (1)
- Nanostructured FeOx films (1)
- Nanostructured material (1)
- Nanostructuring (1)
- Nanotoxicology (1)
- Nanotribology (1)
- Nanoviscosity (1)
- Nanowear (1)
- Naphthalene (Nap) (1)
- Narrow line method (1)
- Natrium (1)
- Natural (1)
- Natural abundance of 15N (1)
- Natural gas (1)
- Natural products (1)
- Natural products discovery (1)
- Natural rubber (1)
- Natural silver wires (1)
- Natural stones (1)
- Nb3Sn (1)
- NbC (1)
- Near ambient pressure xray photo electron spectroscopy (1)
- Near-field spectroscopy (1)
- Near-infrared refectography (1)
- Near-surface X-ray diffraction (1)
- Neel wall (1)
- Nelson’s method (1)
- Neoallergen (1)
- Neoepitopes (1)
- Net-ionization reaction (1)
- Network (1)
- Network science (1)
- Networking (1)
- Neurons (1)
- Neuropeptide (1)
- Neurotrophins (1)
- Neutral dyes (1)
- Neutron Bragg edge imaging (1)
- Neutron Diffraction (1)
- Neutron Imaging (1)
- Neutron Scattering (1)
- Neutron and X-ray diffraction (1)
- Neutron instrument (1)
- Neutron radiology (1)
- Newton Raphson method (1)
- Next generation sequencing (1)
- Ni alloy (1)
- Ni-Mn-Ga (1)
- Ni-based austenitic filler metal (1)
- Nickel alloys (1)
- Nickel chelate (1)
- Nickel nanoparticles (1)
- Nickel-base alloy (1)
- Nile Red (1)
- Nitric acid (1)
- Nitrification (1)
- Nitrobenzene reduction (1)
- Nitrogen fixation (1)
- Nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (1)
- Nitrogen monoxide (1)
- Nitrogen plasma (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Nneutron imaging (1)
- Nobel-metal free electrocatalysis (1)
- Nodularins (1)
- Noise in image (1)
- Nomenclature (1)
- Non Destructive Testing (1)
- Non linear dynamics (1)
- Non-Destructive Evaluation (1)
- Non-classical crystallization (1)
- Non-destructiv testing (1)
- Non-destructive ambient analysis (1)
- Non-destructive evaluation (1)
- Non-destructive testing in civil engineering (1)
- Non-destructive testing of concrete (1)
- Non-destructuive testing (1)
- Non-ferrous metals (1)
- Non-invasive analysis (1)
- Non-invasive scientific methods (1)
- Non-linear Arrhenius behavior (1)
- Non-linear finite element modelling (1)
- Non-metal determination (1)
- Non-negative matrix factorization (1)
- Non-serrated inhomogeneous flow (1)
- Non-spherical nanoparticles (1)
- Non-synoptic wind event (1)
- Non-targeted analysis (1)
- Non-vitriolic iron-gall inks (1)
- Non-weldable superalloy (1)
- Noncovalent interactions (1)
- Nondestructive testing (NDT) (1)
- Nondestructive testing techniques (1)
- Nonlinear Equation of Motion (1)
- Nonlinear Finite Element Formulations (1)
- Nonlinear behavior (1)
- Nonlinear stress-strain curve (1)
- Nonspecific binding (NSB) (1)
- Nosema (1)
- Nosema ceranae (1)
- Notch (1)
- Notch stress approach (1)
- Notches (1)
- Novel metrology (1)
- Nuclear Energy and Engineering (1)
- Nuclear Magnetic Resonance Spectroscopy (1)
- Nuclear power plant (1)
- Nuclear receptor (1)
- Nuclear waste (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Nucleation tendency (1)
- Nucleic acid tests (1)
- Nucleobase (1)
- Nucleocapsid (1)
- Number-weighted median size (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical inversion (1)
- Numerical investigation (1)
- Numerical models (1)
- Numerical welding simulations (1)
- Nutrient (1)
- Nydrogen melting (1)
- OBOC library (1)
- OECD (1)
- OER (1)
- OH (1)
- OH Radical (1)
- OH radicals (1)
- OH scavenger (1)
- OH-radical (1)
- OMS (1)
- OOMMF (1)
- OTDR (1)
- Oberflächenschutzsystem (1)
- Object oriented micromagnetic framework (1)
- Obstacles (1)
- Ochratoxin A (1)
- Octachlortrisilane (1)
- Oddy test (1)
- Offshore geomechanics (1)
- Offshore steel grade (1)
- Offshore wind turbine (1)
- Oil (1)
- Oil spills (1)
- Oil-based (1)
- Oligomerization (1)
- Oligonucleotides (1)
- On-chip screening (1)
- On-line CE/MC-ICP-MS (1)
- On-site detection (1)
- One-bead-one-compound library (1)
- Online Monitoring (1)
- Online Process Monitoring (1)
- Online biosensor (1)
- Online detection (1)
- Onsite inspection (1)
- Ontologies (1)
- Ontology Engineering (1)
- Open Circuit Voltage (1)
- Open data on zenodo (1)
- Open source (1)
- Operando (1)
- Ophthalmology (1)
- Optical Tomography (1)
- Optical assay (1)
- Optical backscatter reflectometry (1)
- Optical birefringence (1)
- Optical criterion of brittleness (1)
- Optical frequency-domain reflectometry (1)
- Optical imaging (1)
- Optical microphone (1)
- Optical time domain reflectometry (1)
- Optical tweezers (1)
- Optically active surfaces (1)
- Optically excited lock-in thermography (1)
- Optische Konstanten (1)
- Orbitrap (1)
- Orchestration (1)
- Ordered mesoporous carbon (1)
- Ordered/disordered structures (1)
- Organic Solar Cell (1)
- Organic Synthesis (1)
- Organic calibration solution (1)
- Organic compounds (1)
- Organic crystal (1)
- Organic electronics (1)
- Organic osmolytes (1)
- Organic peroxides (1)
- Organic phosphates (1)
- Organic-inorganic hybrid composites (1)
- Organic–inorganic nanostructures (1)
- Organophosphonate (1)
- Oriented immobilization (1)
- Orowan Mechanism (1)
- Ortho-Phthalaldehyde (1)
- Orthotropic steel deck (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Oscillation (1)
- Osmia bicornis (1)
- Osmolyte (1)
- Osmophobic effect (1)
- Osmotic minipumps (1)
- Osmotic shock (1)
- Osseointegration (1)
- Osteochondral stifle joint defect (1)
- Osteogenesis (1)
- Outburst floods (1)
- Ovalbumin (1)
- Ovariectomy (1)
- Oven drying (1)
- Overhead transmission line (1)
- Oxidative metabolism (1)
- Oxide melts (1)
- Oxyfuel-Verbrennung (1)
- Oxygen Evolution Reaction (1)
- Oxygen Reduction Reaction (1)
- Oxygen isotope ratios (1)
- Oxygen permability (1)
- Oxygen sensitive (1)
- Oxygenation (1)
- Ozon (1)
- P-efficiency (1)
- P. Fluorescens (1)
- PAHs (1)
- PALM (1)
- PBF-LB/M/316L (1)
- PBFLB/M AlSi10Mg alloy (1)
- PBS (1)
- PCCA+ (1)
- PCE (1)
- PCR (1)
- PDT (1)
- PEM-Wasserelektrolyse (1)
- PET (1)
- PGM-free catalyst (1)
- PIC technology (1)
- PLSR (1)
- PM monitors (1)
- POP (1)
- PQQ (1)
- PS (1)
- PSA (1)
- PTFE (1)
- PUR (1)
- PV module (1)
- PVD hard coating (1)
- PVDF-based membrane (1)
- Pacemaker (1)
- Packaging (1)
- Packing density (1)
- Paints (1)
- Pair distribution function (1)
- Pancharatnam–Berry phase (1)
- Pants (1)
- Papyrology (1)
- Parabolic flight (1)
- Paramagnetism (1)
- Parker method (1)
- Partial discharge (1)
- Partial least square discriminant analysis (PLS-DA) (1)
- Partial least squares regression (1)
- Partial penetration (1)
- Partial pore saturation (1)
- Partial safety factor modification (1)
- Particle architecture (1)
- Particle emission (1)
- Particle emissions (1)
- Particle image velocimetry (1)
- Particle motion trajectory (1)
- Particle size analysis (1)
- Particle size and shape distribution (1)
- Particle synthesis (1)
- Particle transfer (1)
- Particle-bed binder jetting (1)
- Partikelmesstechnik (1)
- Passive sampling (1)
- Patch (1)
- Patents (1)
- Path planning (1)
- Path-based analysis (1)
- Pathogen transmission (1)
- Pattern matching (1)
- Pattern recognition receptor (1)
- Pd(II) (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Peer review (1)
- Pentafluorophosphates (1)
- Pepper (1)
- Peptide aptamers (1)
- Peptide binder (1)
- Peptide folding (1)
- Peptide identification (1)
- Peptide mass fingerprinting (1)
- Peptide probe (1)
- Peptide synthesis (1)
- Peptides and Proteins (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Perfluorinated polymer optical fiber (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance (1)
- Periodic solidification pattern (1)
- Perlite (1)
- Permeation measurements (1)
- Permethrin (1)
- Peroxidase (1)
- Peroxy-fuels (1)
- Persistence (1)
- Perturbed-Chain Statistical Association Fluid Theory (1)
- Perzyna viscoplasticity (1)
- Pesticide (1)
- Pesticide parathion-methyl (1)
- Pestizid (1)
- Petroleum (1)
- Pflanzenvirus (1)
- Pflanzenwachstum (1)
- Ph (1)
- Pharmaceutical (1)
- Pharmaceutical Science (1)
- Pharmaceuticals (1)
- Pharmacy (1)
- Pharmazeutika (1)
- Phase Imaging (1)
- Phase boundary (1)
- Phase development (1)
- Phase error (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase formation (1)
- Phase shifter (1)
- Phase specific residual stresses (1)
- Phase stability (1)
- Phase transition (1)
- Phase unwrapping (1)
- Phase-Field Simulations (1)
- Phase-field modelling (1)
- Phase-sensitive (1)
- Phase-sensitive optical time-domain reflectometry (1)
- Phased Array (1)
- Phased array (1)
- Phased array technique (1)
- Phase‐field modeling (1)
- Phenanthrene (1)
- Phenothrin (1)
- Phenotypic diversity (1)
- Phenotypic heterogeneity (1)
- Phenylketonuria (1)
- Phl p 5 (1)
- Phleum pratense (1)
- Phonon interactions (1)
- Phospha-Michael addition (1)
- Phosphate (1)
- Phosphate extractability and availability (1)
- Phosphinate (1)
- Phosphinine (1)
- Phospholipids (1)
- Phosphonate (1)
- Phosphor (1)
- Phosphorescence (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Phosphotyrosine Biomimetics (1)
- Phosphous recovery (1)
- Photo counting (1)
- Photoacoustic characterization (1)
- Photocatalytic reduction (1)
- Photocatalytic surfaces (1)
- Photochemistry (1)
- Photodynamic therapy (1)
- Photoelectrochemistry (1)
- Photoinduced Electron Transfer (1)
- Photoinduced electron transfer (1)
- Photoligation (1)
- Photometric P determination (1)
- Photonendichtewellen-Spektroskopie (1)
- Photonic biosensor (1)
- Photonic devices (1)
- Photonic wire (1)
- Photonics (1)
- Photons (1)
- Photopolymer (1)
- Photoreforming (1)
- Photosensitization (1)
- Photostability (1)
- Photostabilität (1)
- Photoswitchable rotaxane (1)
- Photothermal (1)
- Photothermal Technique (1)
- Photothermal super resolution (1)
- Photothermisch (1)
- Photovoltaics (1)
- Physical aging (1)
- Physical hazards (1)
- Physical properties (1)
- Physical relaxation (1)
- Physical twin (1)
- Physico-chemical characterisation of minerals (1)
- Physics and Astronomy (miscellaneous) (1)
- Physics and society (1)
- Physisoprtion (1)
- Phytolith (1)
- Phytoliths (1)
- Piezoelectric transducer (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Piezoresponse (1)
- Pink beams (1)
- Pipe weld preparation (1)
- Pipeline (1)
- Pipeline integrity (1)
- Pipeline monitoring (1)
- Pipeline network (1)
- Pipeline vibrations (1)
- Plagioclase (1)
- Planck function (1)
- Plant availability (1)
- Plant pathogen (1)
- Plant virus (1)
- Plant-model mismatch (1)
- Plants (1)
- Plasma Polymerization (1)
- Plasma chemistry (1)
- Plasma cutting (1)
- Plasma deposition (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasma-cut samples (1)
- Plasmid DNA (1)
- Plasmid DNA pUC19 (1)
- Plasmon enhancement (1)
- Plasmonic heating (1)
- Plasmonic nanofocusing (1)
- Plasmonic photocatalysis (1)
- Plastic debris (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Plastic waste recycling (1)
- Plate girders (1)
- Platinum group metals (1)
- Platinum-free catalyst (1)
- Platinum-ruthenium colloid (1)
- Plume (1)
- Polarised light microscopy (1)
- Polarization (1)
- Polishing (1)
- Pollen extract (1)
- Pollinator (1)
- Pollutant (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polybutylensuccinat (PBS) (1)
- Polycaprolactone (1)
- Polychlorosilanes (1)
- Polyclonal Antibodies (1)
- Polycrystal (1)
- Polycrystalline thin films (1)
- Polycyclic aromatic hydrocarbons (1)
- Polydopamine (1)
- Polyelectrolytes (1)
- Polyelektrolyt (1)
- Polyester (1)
- Polyethylene colonization (1)
- Polyethylene glycol (1)
- Polyethylene terephthalate (1)
- Polyimide-coated optical fibers (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer based Nanocomposites (1)
- Polymer blends (1)
- Polymer composite (1)
- Polymer electrolyte fuel cell (1)
- Polymer electrolyte membrane fuel cell (1)
- Polymer encapsulant (1)
- Polymer matrix composites (1)
- Polymer membranes (1)
- Polymer of intrisic microporosity (1)
- Polymer optical fiber POF (1)
- Polymer optical fibers (1)
- Polymer optical fibres (1)
- Polymer particles (1)
- Polymer-based products (1)
- Polymer-ceramic mixtures (1)
- Polymerase mutant (1)
- Polymers and Plastics (1)
- Polymers and plastics (1)
- Polymethyl methacrylate (1)
- Polymorph (1)
- Polyneoptera (1)
- Polynorbornenes (1)
- Polyolefins (1)
- Polyoxometalates (1)
- Polyoxymethylene (1)
- Polyphosphoester (1)
- Polypropylene (1)
- Polysarcosine (1)
- Polystyrene microparticles (1)
- Polyurethan (1)
- Polyurethane foams (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Pore fluids (1)
- Pore pressure (1)
- Pore size distribution (1)
- Pore space characterization (1)
- Pore structure (1)
- Pore volume distribution (1)
- Pores (1)
- Porous building materials (1)
- Porous carbon (1)
- Porous carbons (1)
- Porous media (1)
- Porous rock (1)
- Porphyrin (1)
- Portable (1)
- Portfolio (1)
- Portland clinker (1)
- Position detection (1)
- Position of carboxylate group (1)
- Positron annihilation spectroscopy (1)
- Post-consumer plastic waste (1)
- Posterior fatigue reliability (1)
- Postfluorination (1)
- Pot experiments (1)
- Potash (1)
- Potassium ions (1)
- Potential drop technique (1)
- Potential toxic elements (1)
- Potentiodynamic measurements (1)
- Pouch cell (1)
- Powder X-ray diffraction (1)
- Powder X-ray diffraction (XRD) (1)
- Powder analysis (1)
- Powder bed (1)
- Powder bed density (1)
- Powder bed fusion Laser beam (1)
- Powder diffraction (1)
- Powder diffraction measurements (1)
- Powder metallurgy (1)
- Powder processing (1)
- Powder removal (1)
- Powder-based processes (1)
- Power density (1)
- Power law and power-law breakdown (1)
- Pphosphates (1)
- Pphotophysics (1)
- Ppreheating temperature (1)
- Prebiotic chemistry (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation hardening aluminum alloys (1)
- Precision agriculture (1)
- Precision farming (1)
- Prediction relative (1)
- Predictive maintenance (1)
- Predictive modelling (1)
- Preferential orientation (1)
- Prehydrated electron (1)
- Preprocessing (1)
- Presolvated electron (1)
- Pressure assisted sintering (1)
- Pressure technique (1)
- Pressure-dependent solubility (1)
- Pressure-sensitive adhesive (1)
- Pressure-volume product (1)
- Pressurised liquid extraction (1)
- Prestressed concrete (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Prevention (1)
- Preventive Innovation (1)
- Preventive strategies (1)
- Primary Battery (1)
- Primary difference measurement method (PDM) (1)
- Primary transfer standards (PTSs) (1)
- Primordial soup (1)
- Principal component analysis (1)
- Principal component analysis (PCA) (1)
- Principal stress components (1)
- Principle component analysis (1)
- Printed Electronics (1)
- Printing (1)
- Priority effect (1)
- Probabilistic assessment (1)
- Probabilistic methods (1)
- Probability of damage indication (1)
- Probability of failure (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process (1)
- Process Analytical Tecnology (1)
- Process Control (1)
- Process Monitoring (1)
- Process chain (1)
- Process industry (1)
- Process intelligence (1)
- Process sensors 4.0 (1)
- Process simulation (1)
- Process upscaling (1)
- Product life cycle (1)
- Proficiency test (1)
- Proficiency testing (1)
- Programmed cell death (1)
- Programming (1)
- Progressive catalyst poisoning (1)
- Proinflammatory cytokines (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proof loading (1)
- Proofreading deficient (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Properties (1)
- Prostheses (1)
- Protection housing (1)
- Protective coatings (1)
- Protein Purification (1)
- Protein Tyrosine Phosphatases (1)
- Protein analysis (1)
- Protein coating (1)
- Protein conjugation (1)
- Protein content (1)
- Protein degradation (1)
- Protein folding (1)
- Protein hydrolysis (1)
- Protein oligomerization (1)
- Protein oligomers (1)
- Protein protection (1)
- Protein quantification (1)
- Protein structure (1)
- Protein test (1)
- Protein-modification (1)
- Proteine microarray (1)
- Proteinoid (1)
- Protemics (1)
- Proteoglycans (1)
- Proteome (1)
- Proteomic analysis (1)
- Protocol development (1)
- Proton exchange membrane fuel cell (1)
- Protoplasts (1)
- Prouess-Sensoren 4.0 (1)
- Provenance (1)
- Provenancing (1)
- Proximal soil sensing (1)
- Proximate analysis (1)
- Proximity-enhanced reaction (1)
- Prozesskontrolle (1)
- Prozesssensoren (1)
- Pseudo-Voigt fit function (1)
- Pseudo-translationalsublattices (1)
- Pseudomonas veronii (1)
- Pseudosymmetry (1)
- Pt catalysts (1)
- Pt(111) (1)
- Pt(II) (1)
- PtNP (1)
- Ptinidae (1)
- Pt–Si layers (1)
- Public Health, Environmental and Occupational Health (1)
- Public funding (1)
- Publications (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Pull-out composite materials (1)
- Pullulan (1)
- Puls-echo method (1)
- Pulse Laser (1)
- Pulse compression (1)
- Pulse-echo method (1)
- Pulsed laser ablation (1)
- Pulsed laser beam welding (1)
- Pulsed magnetic field (1)
- Pulsed thermography (1)
- Pump-probe experiments (1)
- Pure aluminium (1)
- Push and pull effects (1)
- Push-out test (1)
- Pyrolyse (1)
- Pyrolysis (1)
- Pyrometallurgie (1)
- Python (1)
- QI-FoKuS (1)
- QR code carrier (1)
- QUASES (1)
- Quality assurancemechanism (1)
- Quality infrastructure (1)
- Quality monitoring (1)
- Qualitätskontrolle (1)
- Quanten-Kaskadenlaser (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantitative NMR-Spektroskopie (1)
- Quantitative determination (1)
- Quantitative moisture measurement (1)
- Quantitative protein analysis (1)
- Quantum Dot (1)
- Quantum Dot Rod (1)
- Quantum Dots (1)
- Quantum Yield (1)
- Quantum chemistry (1)
- Quantum mechanics (1)
- Quartz (1)
- Quartzite rock (1)
- Quasi-direct damage (1)
- Quellungsmessung (1)
- Quenching and partitioning (1)
- Questionnaire (1)
- Quick-XAS (1)
- R package (1)
- R&D (1)
- R-curve (1)
- RAMAN (1)
- RBD (1)
- RBE (1)
- RDF (1)
- REACH regulation (1)
- RED (1)
- REMPI (1)
- RFID based sensors (1)
- RNA (1)
- RNA interference (1)
- RNA virus (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RT (1)
- RXES (1)
- Racemate (1)
- Radiated wavefield (1)
- Radiation (1)
- Radiation-induced attenuation (1)
- Radical (1)
- Radical Scavenge (1)
- Radical Scavenger (1)
- Radioactive waste disposal (1)
- Radiocarbon (1)
- Radiographic procedures (1)
- Radiographic testing (RT) (1)
- Radioprotector ectoine (1)
- Radiotherapy (1)
- Radon (1)
- Rail vibrations (1)
- Railroad (1)
- Railway (1)
- Railway braking forces (1)
- Railway induced vibration (1)
- Railway measurement campaign (1)
- Railway vibration measurements (1)
- Rainwater (1)
- Raman spectra (1)
- Raman-spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Rapid solidification (1)
- Rapid test (1)
- Rapid tests (1)
- Rare earth elements separations (1)
- Rat (1)
- Rat/human liver microsomes (1)
- Ratcheting convective cell (1)
- Ratiometric (1)
- Raw material equivalent (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Rayleigh (1)
- Rayleigh Scattering (1)
- Rayleigh scattering (1)
- Re-entrant surface feature (1)
- Re-hydration (1)
- Reaction Monitoring (1)
- Reaction monitoring (1)
- Reaction-to-small-flame (1)
- Reactive fire protection system (1)
- Reactor conditions (1)
- Reactor control (1)
- Ready-to-use (1)
- Real scale test (1)
- Real time growth control (1)
- Real time measurement (1)
- Real use behavior (1)
- Real-time imaging (1)
- Real-time infrared spectroscopy (1)
- Real-time quality control (1)
- Rebound hammer (1)
- Recombinant Antibody (1)
- Recombinant antibody (1)
- Recombinant protein (1)
- Recommendations (1)
- Reconstruction calculation (SAFT) (1)
- Recyclable (1)
- Recycled gypsum (1)
- Recycled materials (1)
- Recycled sources (1)
- Recycling fertilizer (1)
- Redox (1)
- Redox switch (1)
- Reduced order models (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reference Materials (1)
- Reference Method (1)
- Reference isotherm (1)
- Reference measurement (1)
- Reference method (1)
- Reference specimen (1)
- Reference standards (1)
- Reference values (1)
- References (1)
- Referenzmaterialien (1)
- Reflectivity (1)
- Refractive index (1)
- Refracto-vibrometry (1)
- Refractory (1)
- Refractory alloy (1)
- Refractory alloys (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regelsetzung (1)
- Regenerator (1)
- Region of interest (1)
- Regolith (1)
- Regulatory identification of nanomaterials (1)
- Reheating (1)
- Reinforcement corrosion (1)
- Reinheitsbestimmung (1)
- Reinigung (1)
- Relative humidity (1)
- Relaxation analysis (1)
- Relaxation fatigue (1)
- Relaxation times (1)
- Reliability assessment (1)
- Remote sensing vibrometer (1)
- Renal disease (1)
- Renewable copolymers (1)
- Renewable resources (1)
- Repair welding (1)
- Repair-welding (1)
- Repelling surface coatings (1)
- Replication (1)
- Replication crisis (1)
- Reporter (1)
- Representative morphology modeling (1)
- Reproducibility crisis (1)
- Requirements (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Research Software (1)
- Research agenda (1)
- Research and innovation (1)
- Research data management (1)
- Residential application (1)
- Residual strains (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Resilience (1)
- Resins (1)
- Resistance (1)
- Resistance stress (1)
- Resistivity (1)
- Resolution (1)
- Resolution criterion (1)
- Resonance (1)
- Resonance frequency (1)
- Resonance wavelength shift (1)
- Resource-based-view (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Reverse Monte Carlo (1)
- Reverse Monte Carlo (RMC) (1)
- Reverse glass painting (1)
- Reverse microemulsion (1)
- Reverse time migration (1)
- Reversible covalent hydrazine chemistry (RCHC) (1)
- Review (1)
- Rhenanite (1)
- Rheometry (1)
- Rheumatoid arthritis (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhodamine (1)
- Rhodamine B (1)
- Rhodiumcomplexes (1)
- Rice (1)
- Rigid (1)
- Rigid amorphous fraction (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Ring resonator (1)
- Ring-opening Polymerisation (1)
- Ripples (1)
- Risk (1)
- Risk asessment (1)
- River (1)
- River water sulfate (1)
- Road inspection (1)
- Road pavement (1)
- Robocasting (1)
- Robustness (1)
- Rock wool (1)
- Rock-art caves (1)
- Rock-inhabiting fungi (1)
- Rohrleitungen (1)
- Roll-to-Roll Processing (1)
- Rolling resistance (1)
- Room fire (1)
- Room-temperature (1)
- Rosamine (1)
- Rosin (1)
- Roughness analysis (1)
- Round Robin (1)
- Round robin test (1)
- Rregulations (1)
- Rround robin test (1)
- Ruthenium (1)
- Ruthenium(II) complexes (1)
- Röntgenbeugung (1)
- Rückverstromung (1)
- S-N curve (1)
- S-Phase (1)
- S-phase (1)
- SA conjugates (1)
- SA508 (1)
- SAMs (1)
- SANS (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SBA-15 (1)
- SBA-16 (1)
- SDC (1)
- SEC (1)
- SEIRA methodology (1)
- SEM micrography (1)
- SERDS (1)
- SHT (1)
- SI Traceability (1)
- SIDA-LC-MS/MS (1)
- SIMS (1)
- SKPFM (1)
- SNR (1)
- SO2 (1)
- SOM-SM (1)
- SPH (1)
- SPR (1)
- SR-microXRF (1)
- STEM-in-SEM (1)
- STXM (1)
- SVOC (1)
- SWIR thermography (1)
- SYBR Gold (1)
- SYBR gold (1)
- Sabatier (1)
- Safe by design (1)
- Safe-by-design (1)
- Safety distances (1)
- Salicylate (1)
- Salicylic acid (1)
- Salinomycin (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sample loss (1)
- Sample piece size (1)
- Sample pretreatment (1)
- Sample random results (1)
- Samples (1)
- Saxitoxins (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale anchor (1)
- Scale conversion (1)
- Scan strategy influence (1)
- Scandium (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning Probe Microscopy (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning electron microscope (1)
- Scanning laser Doppler vibrometry (1)
- Scanning micro-X-ray fluorescence (1)
- Scanning probe microscopy (1)
- Scanning transmission x- ray microscopy (1)
- Scanning transmission x-ray microscopy (STXM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Schadstoffe (1)
- Schaum (1)
- Schichtdickenmessung (1)
- Schieneninfrastruktur (1)
- Schlangenbohne (1)
- Schlieren Imaging (1)
- Schmiedeteile (1)
- Schnellladung (1)
- Schnelltest (1)
- Schnelltests (1)
- SchwarzP cells (1)
- Scientific publication (1)
- Scientific software (1)
- Scientific workflows (1)
- Scintillator (1)
- Scission (1)
- Screening method (1)
- Screening test (1)
- Scribal corrections (1)
- Seal failure (1)
- Seal force (1)
- Sealing structures (1)
- Seam geometry (1)
- Seasonal energy efficiency ratio (1)
- Seasonal performance factor (1)
- Seawater (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Secondary P-fertilizer (1)
- Secondary hazard (1)
- Secondary metabolites (1)
- Security (1)
- Security applications (1)
- Sediment (1)
- Sedimentation (1)
- Sedimentation box (SB) (1)
- Segmentation (1)
- Segmentations (1)
- Segregation (1)
- Segregation Engineering (1)
- Seismic (1)
- Seismic load (1)
- Seismic migration (1)
- Seismic signal reconstruction (1)
- Seismics (1)
- Seismology (1)
- Selected area XPS (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser beam melting (1)
- Selective oxidation (1)
- Selektive-laser-melting (1)
- Selenium (1)
- Self assembly (1)
- Self-absorption (1)
- Self-assembled monolayers (1)
- Self-assembled monolayers (SAM) (1)
- Self-assembled structures (1)
- Self-driving-labs (SDLs) (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Semi-metallic brake-pad material (1)
- Semiconductor nanocrystals (1)
- Semiconductor quantum dot (1)
- Semitransparent (1)
- Semivolatile organic compounds (1)
- Sensing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sensor Materials (1)
- Sensor array (1)
- Sensor network (1)
- Sensor planning (1)
- Sensor-based sorting (1)
- Sensors Placement (1)
- Sensory particles (1)
- Separability assumption (1)
- Separability condition (1)
- Separate sewer system (1)
- Separation (1)
- Sequence annotation (1)
- Sequence dependence (1)
- Sequence revision (1)
- Sequencing (1)
- Sequencing algorithm (1)
- Sequential spectroscopic data (1)
- Series production (1)
- Sesistance (1)
- Sets of archaeometric data (1)
- Settling velocity (1)
- Setzmaschine (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sex reversal (1)
- Shadowgraphy (1)
- Shape (1)
- Shape memory alloy (1)
- Shape memory polymer composite (1)
- Shape memory properties (1)
- Shape-memory alloys (1)
- Shared infrastruture (1)
- Shear load (1)
- Shear modulus (1)
- Shear testing (1)
- Shear thinning (1)
- Shearing gratings (1)
- Sheep (1)
- Sheep animal model (1)
- Ship building (1)
- Shipbuilding steel (1)
- Short cracks (1)
- Short-beam strength (1)
- Shotcrete (1)
- SiGe (1)
- Sicherheit (1)
- Sicherheitsbewertung (1)
- Siderite (1)
- Signal Features (1)
- Signal features (1)
- Silanes (1)
- Silica and polystyrene nanoparticles (1)
- Silica coating (1)
- Silica diagenesis (1)
- Silica nanoparticles (1)
- Silicate (1)
- Silicate glass-ceramics (1)
- Silicate glasses (1)
- Silicon chlorides (1)
- Silicon isotopes (1)
- Silicon nanowire (1)
- Silicon release (1)
- Silicon stable isotopes (1)
- Silicone elastomer (1)
- Silicone rubber (1)
- Silk (1)
- Silk Road (1)
- Sillver (1)
- Silver (1)
- Silver metallization paste (1)
- Simultaneous temperature and humidity sensing (1)
- Single Cell (1)
- Single asperity (1)
- Single asperity contact (1)
- Single atom catalysts (1)
- Single cell microbiology (1)
- Single crystal Ni-Base superalloys (1)
- Single enhancement (1)
- Single photon and quantum effects (1)
- Single source precursors (1)
- Single-Crystal (1)
- Single-cell analysis (1)
- Single-crystals (1)
- Single-family house energy supply system (1)
- Single-pass welding (1)
- Single-shot XAFS (1)
- Single-sided NMR (1)
- Singlet oxygen (1)
- Sinking velocity (1)
- Sinter retardation (1)
- Sintered Material (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Size exclusion chromatography (1)
- Size measurement (1)
- Size measurements (1)
- Size resolved chemical composition (1)
- Slag (1)
- Slicers (1)
- Sliding (1)
- Sliding wear (1)
- Slip localization (1)
- Slippage of weakly linked layers (1)
- Slope stability (1)
- Slow crack growth (1)
- Slow crack growth (SCG) (1)
- Slurry (1)
- Small angle scattering (1)
- Small molecule detection (1)
- Small-angle X-ray Scattering (1)
- Small-angle neutron scattering (1)
- Small-angle xray scattering (1)
- Small-area XPS (1)
- Small-scale specimens (1)
- Small-spot XPS (1)
- Smart actuators (1)
- Smart label (1)
- Smart materials (1)
- Smart test laboratories (1)
- Smarte Aktoren (1)
- Smarte Sensoren (1)
- Smarter Sensor (1)
- Smartphone readout (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Social (1)
- Social Immunity (1)
- Social acceptance (1)
- Social immunity (1)
- Social insect (1)
- Social insects (1)
- Social sustainability (1)
- Sociality (1)
- Socio-ecological models (1)
- Socio-technical Transition (1)
- Soda lakes (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Sodium Ion Batteries (1)
- Sodium carbonate minerals (1)
- Sodium chloride (1)
- Soft-templated mesoporous films (1)
- Softening temperature (1)
- Software Infrastructure (1)
- Software Licensing (1)
- Software Training (1)
- Software UNIFIT 2022 (1)
- Soil contact (1)
- Soil heterogeneity (1)
- Soil microbial community (1)
- Soil organic matter (1)
- Soil water content (1)
- Soil-building interaction (1)
- Soil-like material (1)
- Sol-Gel-Synthese (1)
- Sol-gel process (1)
- Sol-gel synthesis (1)
- Solar cell (1)
- Solar cells (1)
- Solar concentrator (1)
- Solar energy (1)
- Solid (1)
- Solid acids (1)
- Solid electrolytes (1)
- Solid lubricant (1)
- Solid lubrication (1)
- Solid state (1)
- Solid state NMR spectroscopy (1)
- Solid state cooling (1)
- Solid state emission (1)
- Solid-liquid-extraction (1)
- Solid-phase extraction (SPE) (1)
- Solid-state NMR (1)
- Solidification (1)
- Solitary bees (1)
- Solute excretion (1)
- Solution doping (1)
- Solvent replacement (1)
- Solvent-free (1)
- Solvents (1)
- Solvolyse (1)
- Solvolysis (1)
- Sonden (1)
- Sorghum (1)
- SpICP-MS (1)
- Spannbetonbrücke (1)
- Spannbetonschwelle (1)
- Spannbetonschwellen (1)
- Spatial heterodyne spectrometer (1)
- Special issue (1)
- Specific probe (1)
- Specimen geometry (1)
- Spectoscopic imaging (1)
- Spectral CT (1)
- Spectral elements (1)
- Spectrometer (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopic imaging (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spectrum simulation (1)
- Speed of sound (1)
- Spike protein (1)
- Spill evaporation (1)
- Spin (1)
- Spot-welded joints (1)
- Spray drying (1)
- Sr isotope analysis (1)
- SrF2 (1)
- SrTiO3 (1)
- SsNMR (1)
- Stable crack growth (1)
- Stable isotopes (1)
- Stainless steels (1)
- Staircase method (1)
- Stakeholder (1)
- Standard atomic weight (1)
- Standardization research (1)
- State-of-the-art (1)
- Static axle loads (1)
- Stationäre Phase (1)
- Statistical analysis (1)
- Statistical particle distribution (1)
- Statistical pattern recognition (1)
- Statistics (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Status report (1)
- Steam (1)
- Steel alloy (1)
- Steel and aluminium (1)
- Steel billets (1)
- Steel construction (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steel drum (1)
- Steel fiber reinforced concrete (1)
- Steel fiber reiniforced concrete (1)
- Steel weldment (1)
- Steelmaking residues (1)
- Steinergänzungsmassen (1)
- Stepwise growth (1)
- Stereocomplex (1)
- Stereophotogrammetry (1)
- Stern Geary constant (1)
- Stern-Geary-Konstante (1)
- Stickoxide (1)
- Stiffness (1)
- Stiffness variation (1)
- Stochastic Landau Lifshitz Gilbert equation (1)
- Stochastic Landau Lifshitz equation (1)
- Stochastic modeling (1)
- Stochastic sample functions (1)
- Stoichiometric phases (1)
- Stone Age (1)
- Storage Mechanism (1)
- Stored energy (1)
- Stormwater retention tank (1)
- Straight edge method (1)
- Strain (1)
- Strain and temperature measurements (1)
- Strain difference (1)
- Strain fields prediction (1)
- Strain gauge factor (1)
- Strain measurements of wind turbine support structures (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strand break (1)
- Stranski–Krastanow growth (1)
- Strategic Research Agenda (SRA), (1)
- Strategic alliances (1)
- Strategy and Management (1)
- Stree-strain curve (1)
- Strengthening mechanisms (1)
- Stress (1)
- Stress Coupling (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress conditions (1)
- Stress corrosion tests (1)
- Stress distribution (1)
- Stress reduction (1)
- Stress stiffening (1)
- Stress tolerance (1)
- Stress-protective morphology (1)
- Stress-relief heat-treatments (1)
- Stress-strain behaviour (1)
- Stress-strain relation (1)
- Stressed (1)
- Stretchable electronics (1)
- Stringer (1)
- Strontium isotope (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural Biology (1)
- Structural Materials (1)
- Structural control (1)
- Structural health monitoring (SHM) (1)
- Structural precision (1)
- Structural properties (1)
- Structural relaxation (1)
- Structural reliability (1)
- Structural science (1)
- Structural steel (1)
- Structural stress approach (1)
- Structural system identification (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure factors (1)
- Structure prediction (1)
- Structured cantilever (1)
- Structure–property correlation (1)
- Strukturmonitoring (1)
- Strukturüberwachung (1)
- Strätlingite (1)
- Sub pixel analysis (1)
- Sub-4nm particles (1)
- Sub-aerial biofilms (1)
- Sub-aerial biofilms (SAB) (1)
- Sub-oxide (1)
- Subaerial and subaquatic biofilm (1)
- Subsidence monitoring (1)
- Subsocial (1)
- Substructure failures (1)
- Sugar cane bagasse (1)
- Sulfate attack (1)
- Sulfated materials (1)
- Sulfates (1)
- Sulfide (1)
- Sulfide sensing (1)
- Sulfiding (1)
- Sulfo-NHS (1)
- Sulfur cathodes (1)
- Sulfur containing polymers (1)
- Sulfur isotopes (1)
- Sulphur (1)
- Sulphur isotope (1)
- Sum Parameter (1)
- Sum Parameter Method (1)
- Sum parameter method (1)
- Sun (1)
- Sunscreen (1)
- Super Resolution (1)
- Super martensitic filler material (1)
- Super martensitic stainless steel (1)
- Superalloy single crystals (1)
- Superalloys (1)
- Superconductivity (1)
- Supercritical CO2 (1)
- Superelasticity (1)
- Superior sorbent (1)
- Superlattice extrinsic stacking faults (1)
- Supermartensitic steel (1)
- Superparamagnetic nanoparticles (1)
- Superparamagnetism (1)
- Supersaturation (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Support vector machine (1)
- Supported catalyst (1)
- Suppression (1)
- Supra molecular polymerization (1)
- Supramolecular Chemistry (1)
- Supramolecules (1)
- Surface Chemistry (1)
- Surface Integrity (1)
- Surface area (1)
- Surface charge (1)
- Surface chemical analysis (1)
- Surface chemisttry (1)
- Surface coating (1)
- Surface conditions (1)
- Surface crystallization (1)
- Surface defects (1)
- Surface elasticity (1)
- Surface interactions (1)
- Surface ligand (1)
- Surface migration barriers (1)
- Surface plasmon polaritons (1)
- Surface preparation (1)
- Surface processing (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface relaxivities (1)
- Surface relaxivity (1)
- Surface roughness analysis (1)
- Surface science (1)
- Surface stress (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Surface treatments (1)
- Surface waters (1)
- Surface wave velocity (1)
- Surface-induced Melting (1)
- Surface-initated grafting (1)
- Surrogate citations (1)
- Suspended particulate matter (SPM) (1)
- Suspension growth (1)
- Sustainability assessment (1)
- Sustainable Production (1)
- Sustainable Software Development (1)
- Sustainable Synthesis (1)
- Sustainable building materials (1)
- Sustainable cement (1)
- Sustainable concrete (1)
- Sustainable construction (1)
- Suzuki coupling (1)
- Suzuki-Miyaura coupling (1)
- Swell-capture (1)
- Swelling (1)
- Swirl (1)
- Symbolic computation (1)
- Synchrotron FTIR (1)
- Synchrotron X-ray CT (1)
- Synchrotron X-ray diffraction (SXRD) (1)
- Synchrotron computed tomography (1)
- Synchrotron measurements (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synchrotron x-ray refraction radiography (SXRR) (1)
- Synthetic Aperture Focusing Technique (1)
- Synthetic aperture focusing technique (1)
- Synthetic aperture focusing technique (SAFT) (1)
- Synthetic metabolism (1)
- System identification (1)
- System method (1)
- Systematics (1)
- Systems biology (1)
- T1 precipitate (1)
- TDLAS (1)
- TEKKEN (1)
- TFA (1)
- TG-FTIR (1)
- TGA (1)
- TGA-FTIR (1)
- TGA-MS (1)
- THP(B) (1)
- TKD (1)
- TLR4 activation (1)
- TOF (1)
- TRIS (1)
- TRL (1)
- TTS (1)
- TTS principle (1)
- TXRF-XAS (1)
- Talbot-Lau (1)
- Tank leaching test (1)
- Tanks (1)
- Tannery industry (1)
- Tantalum oxyfluorides (1)
- Tape casting (1)
- Tapes (1)
- Target (1)
- Tau (1)
- Taxonomy (1)
- Tb3+ (1)
- Technical crack detection (1)
- Technical lignin (1)
- Temeprature scaling (1)
- Temperature Control (1)
- Temperature and strain monitoring (1)
- Temperature and strain sensing (1)
- Temperature dependence (1)
- Temperature effect (1)
- Temperature effects (1)
- Temperature measurement (1)
- Temperature sensitivity (1)
- Temperature-dependent neutron transmission (1)
- Temperature-memory effect (1)
- Temperature-memory polymer (1)
- Temperature-programmed desorption (1)
- Temple Scroll (1)
- Tensile Strength (1)
- Tensile Test Ontology (1)
- Tensile loading (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Tension members (1)
- Terbium (1)
- Terephthalic acid (1)
- Termite-associated microbes (1)
- Ternary (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Test specimen (1)
- Test strip (1)
- Testing (1)
- Testing laboratories (1)
- Testing methods (1)
- Testing procedure (1)
- Tetracyclin (1)
- Tetramethylammonium hydroxide (1)
- Textil (1)
- Textile (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thawing (1)
- Theranostic (1)
- Theranostics (1)
- Therapeutic Antibodies (1)
- Therapy (1)
- Thermal Analysis (1)
- Thermal Cycling (1)
- Thermal Gravimetric Analysis (1)
- Thermal Process Engineering (1)
- Thermal anhydrite (1)
- Thermal annealing (1)
- Thermal cycles (1)
- Thermal decomposition (1)
- Thermal diffusivity (1)
- Thermal effusivity (1)
- Thermal extraction desorption-gas chromatography/mass spectrometry (TED-GC/MS), monitoring (1)
- Thermal runaways (1)
- Thermal stability (1)
- Thermal transient problem (1)
- Thermal transport (1)
- Thermo physical simulation (1)
- Thermo-mechanical testing (1)
- Thermo-mechanics (1)
- Thermoacoustic emitter (1)
- Thermoanalytics (1)
- Thermoanalytik (1)
- Thermobimetal (1)
- Thermochemical treatment (1)
- Thermochemistry (1)
- Thermochromic properties (1)
- Thermocouple (1)
- Thermodynamic analysis (1)
- Thermodynamic simulation (1)
- Thermoelectric properties (1)
- Thermografie (1)
- Thermographie (1)
- Thermography Computed (1)
- Thermomagnetic generator (1)
- Thermomechanical properties (1)
- Thermoresponsive polymers (1)
- Thermoset (1)
- Thermosets (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick shells (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Thickening (1)
- Thickness (1)
- Thickness measurement (1)
- Thickness resonance (1)
- Thin film characterization (1)
- Thin film sensor fabrication (1)
- Thin film systems (1)
- Thin magnetic films (1)
- Thin mesoporous films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Thiols (1)
- Thiourea-formaldehyde (1)
- Tholins (1)
- Three-dimensional data quantification (1)
- Three-dimensional tomographies (1)
- Throwing-stick (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- TiO2 (1)
- Tiatanium (1)
- Tiered (1)
- Timber (1)
- Time of flight (1)
- Time resolution (1)
- Time resolved chemical composition (1)
- Time-lapse X-ray computed tomography (1)
- Time-of-flight measurements (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Time-resolved scattering (1)
- Tin catalysts (1)
- Tire wear (1)
- Tissue (1)
- Titan-Halterung (1)
- Titania (1)
- Titania nanoparticles (1)
- Titanium dioxide (1)
- Titanium nitride (1)
- Tobermorite (1)
- Toll-like receptor 4 (1)
- Tomographic reconstruction (1)
- Tomography of wood samples (1)
- Tonalide (1)
- Tool comparison (1)
- Tooth wear (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topical collection: Analytical Methods and Applications in the Materials and Life Sciences (1)
- Topography (1)
- Torah scrolls (1)
- Total Quality Management (1)
- Total cyanide (1)
- Total element determination (1)
- Touch surfaces (1)
- Toughening mechanisms (1)
- Toughness (1)
- Toxicity testing (1)
- Toxikologie (1)
- Toys (1)
- Trace Analysis (1)
- Trace elements (1)
- Traceable nanoparticle size measurements; (1)
- Tracer-based sorting (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Track vibration (1)
- Track-soil interaction (1)
- Train passage (1)
- Train tracking (1)
- Train-induced vibration (1)
- Transducers (1)
- Transfer function (1)
- Transferrin (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transient signal (1)
- Transition metal (1)
- Transition-metal doped (1)
- Transmission (1)
- Transmission Electron Microscopy (TEM) (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transparency (1)
- Transparent ceramic (1)
- Transpassive dissolution (1)
- Transport limitations (1)
- Transport number (1)
- Transportation energy (1)
- Transverse butt weld (1)
- Trapping (1)
- Treated wood (1)
- Treatment (1)
- Trench (1)
- Trends in extreme events (1)
- Trennung (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribochemistry (1)
- Tribofilm (1)
- Trilobite compound eyes (1)
- Tripeptides (1)
- Triple UNet (1)
- Triply Periodical Minimal Surface (1)
- Triply periodic minimal surface structures (1)
- Truffle (1)
- Truffle Aroma (1)
- Trust (1)
- Tryptic digest (1)
- Tuber melanosporum (1)
- Tumble dryer (1)
- Tumor radiation therapy (1)
- Tunable antenna (1)
- Tungsten carbide (WC) (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- Turbulence model (1)
- Turbulent Wind Excitation (1)
- Turning maneuvers (1)
- Tutzing Symposion (1)
- Twisted-slit collimator (1)
- Two-dimensional chromatography (2D-LC) (1)
- Two-dimensional solidification (1)
- Two-photon adsorption (1)
- Two-photon-polymerization (1)
- Two-run welding technique (1)
- Type-I pyrethroids (1)
- UAS (1)
- UCST-type copolymer (1)
- UHMWPE (1)
- UHPC (1)
- UN Test O.2 (1)
- UN-GHS (1)
- UPLC-MS/MS (1)
- USAXS (1)
- UV Vis (1)
- UV absorption (1)
- UV irradiation (1)
- UV photons (1)
- UV protection (1)
- UV-A (1)
- UV-B (1)
- UV-C (1)
- UV-Vis (1)
- UV-blocker addition (1)
- UV-irradiation (1)
- UV-spectrometry (1)
- UV/VIS (1)
- UV–Vis spectroscopy (1)
- Ultra high molecular weight polyethylene (1)
- Ultra sound (1)
- Ultra-high performance concrete (1)
- Ultra-short pulse laser processing (1)
- Ultrafast microscopy (1)
- Ultraschall-Echo-Verfahren (1)
- Ultraschallecho-Verfahren (1)
- Ultrasensitive (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic Guided Waves (1)
- Ultrasonic echo technique (1)
- Ultrasonic imaging of internal reflectors (1)
- Ultrasonic probe (1)
- Ultrasonic reflection measurement (1)
- Ultrasonic test (1)
- Ultrasonic testing (UT) (1)
- Ultrasonic transducer (1)
- Ultrasonics (1)
- Ultrasound concrete (1)
- Ultrasound gel (1)
- Umweltmessung (1)
- Umweltschadstoffe (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- Uncertainties (1)
- Uncertainty Quantification (1)
- Uncertainty estimation (1)
- Underground (1)
- Unfallszenarien (1)
- Unsharpness (1)
- Unstressed (1)
- Upconverion (1)
- Upconverstion (1)
- Uptake studies (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utility and decision theory (1)
- Utility poles (1)
- V-notch impact toughness (1)
- VAMAS (1)
- VE-tongue (1)
- VMAAS (1)
- VO (1)
- VOC emission (1)
- VOC-Emission (1)
- VPDB (1)
- VRFB (1)
- VSSA (1)
- VVOC (1)
- VVOCs (1)
- Vacuum (1)
- Validate method (1)
- Validation trial (1)
- Value of action analysis (1)
- Van der Waals forces (1)
- Vanadium (1)
- Vanadium oxide catalysts (1)
- Varestraint testing (1)
- Variable frequency drive (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vario EL III (1)
- Varroa destructor (1)
- Vascular endothelial growth factor (1)
- Vegetable edible oil (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Velocities (1)
- Venetzungsdichte (1)
- Verbundwerkstoffe (1)
- Verdampfung (1)
- Verdunstung (1)
- Verkehrsinfrastruktur (1)
- Verkehrslasten (1)
- Verteilte faseroptische Sensoren (1)
- Veterinary drugs (1)
- Vibration (1)
- Vibration sensing (1)
- Vibration signal analysis (1)
- Vigna unguiculata (1)
- Virial coefficients (1)
- Virtual CT (1)
- Virtual wave concept (1)
- Virtual waves (1)
- Virucidality (1)
- Virus detection (1)
- Viruses (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vitrimer (1)
- Vitriolic iron-gall inks (1)
- Vivianite (1)
- Vocabulary providers (1)
- Void nucleation & growth (1)
- Volatile organic compound (1)
- Volatile organic compounds; (1)
- Volcano plot (1)
- Voltage Loss (1)
- Volume changes (1)
- Volumetric uptake (1)
- Vor-Ort-Analytik (1)
- Vorticity noise (1)
- Voxel size (1)
- Vulcanization (1)
- WD-XRF (1)
- WRC 1992 diagram (1)
- WSN (1)
- WWTP (1)
- Wall paintings (1)
- Warfarin (1)
- Wasserstoff (1)
- Wasserstoff-Druckbehälter (1)
- Wasserstoff-Qualität (1)
- Wasserstoffspeicher (1)
- Wasserstoffspeicherung (1)
- Waste chracterization (1)
- Waste heat (1)
- Waste heat conversion (1)
- Waste incineration (1)
- Waste water treatment (1)
- Waste-to-energy (1)
- Waste-water (1)
- Wastewater (1)
- Water Diffusion (1)
- Water contact (1)
- Water content (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water in glass (1)
- Water management (1)
- Water permeability (1)
- Water speciation (1)
- Water splitting (1)
- Water stability (1)
- Water structure (1)
- Water transport (1)
- Water treatment (1)
- Water-based (1)
- Wave propagation (1)
- Wavelet (1)
- Wavenumber integrals (1)
- Waxes (1)
- Wear particles (1)
- Weathering tests (1)
- Web mining (1)
- Weibull distribution (1)
- Weld defects (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Weld metal cracking (1)
- Weld pool (1)
- Weld pool support (1)
- Weldability (1)
- Welded Joints (1)
- Welded joint (1)
- Welded joints (1)
- Welding Simulation (1)
- Welding thermal cycle (1)
- Welds (1)
- Weldx (1)
- Werkstoffdatenbank (1)
- Wet soil (1)
- Wetting (1)
- Wheel-rail friction coefficient (1)
- Wheel-rail tangential forces (1)
- Wheelset accelerations (1)
- White light interference microscopy (1)
- White light interferometry (1)
- White light interferometry microscopy (1)
- White-light Interference Microscopy (1)
- White-rot fungi (1)
- Whole water samples (1)
- Whole-chain CCS scenario (1)
- Wide-range (1)
- Widerstandspunktschweißen (1)
- Wild bees (1)
- Wildfire (1)
- Wind turbine rotor blades (1)
- Wind turbine tower (1)
- Windenergie Anlage Rotorblätter (1)
- Windgeschwindigkeit (1)
- Wipe test (1)
- Wire break (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wood Modification (1)
- Wood chips (1)
- Wood materials (1)
- Wood modification (1)
- Wood samples (1)
- Wooden toys (1)
- Work function (1)
- Work of adhesion (1)
- Workflow (1)
- Workflow management (1)
- Working life (1)
- Writing materials (1)
- X-Ray (1)
- X-Ray Fluorescence (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray CT (1)
- X-ray Color Camera (1)
- X-ray Computed Tomography (CT) (1)
- X-ray Diffraction (1)
- X-ray Fluorescence (1)
- X-ray Fluorescence analysis (1)
- X-ray absorption Fine Spectroscopy (1)
- X-ray absorption fine structure (1)
- X-ray absorption near-edge structure (1)
- X-ray and Neutron Diffraction (1)
- X-ray and electron diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computer tomography (1)
- X-ray dark-field radiography (1)
- X-ray diffraction (XRD) (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray fluorescence analysis (1)
- X-ray fuorescence (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray micro-computed tomography (1)
- X-ray microdiffraction (1)
- X-ray microscopy (1)
- X-ray microtomography (1)
- X-ray optics (1)
- X-ray reflectivity (1)
- X-ray refraction radiography (1)
- X-ray spectrum (1)
- X-ray tomographic (1)
- XAFS (1)
- XANES X-ray absorption near edge structure spectroscopy (1)
- XANES/EXAFS (1)
- XCT Data Conditioning (1)
- XPCS (1)
- XRF imaging (1)
- Xpoxy resin (1)
- Xray (1)
- Xray photo electron spectrocopy (1)
- YES assay (1)
- Yellowness index (1)
- Yerba mate tea (1)
- Yield stress (1)
- Young's modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Ytterbium (1)
- Yttria stabilized zirconia (1)
- ZCF (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zellulose (1)
- Zenodo (1)
- Zeolite (1)
- Zeolites (1)
- Zeolithe (1)
- Zeonex (1)
- Zero wear (1)
- Zerstörungsfreie Prüfung von Schweißnähten (1)
- Zinc catalyst (1)
- Zinc ferrite (1)
- Zinc oxide (1)
- Zinc phosphate (1)
- Zirconia-toughened alumina (1)
- Zirconium (1)
- Znc (1)
- Zustandsbewertung (1)
- Zuverlässigkeitsanalyse (1)
- Zwitterion (1)
- [MMIM]+[DMP]− (1)
- a-zearalenol (1)
- aRTist (1)
- abasic side (1)
- absolute measurements (1)
- absorption (1)
- amorphous carbon film (1)
- amorphous silica film (1)
- atomic weight (1)
- base loss (1)
- bended arrow of time (1)
- bio-diagnostic (1)
- biodegradable material (1)
- biokompatibel (1)
- biomedical applications (1)
- caffeine (1)
- calibration (1)
- carbon black (1)
- coda wave interferometry (1)
- compost (1)
- confocal (1)
- contact resonance (1)
- corrosion (1)
- cross-reactivity (1)
- crystal structures (1)
- dXCT (1)
- dry friction (1)
- dsDAN monolayer (1)
- dsDNA (1)
- dye (1)
- electrochemical dealloying (1)
- electron microscopy (1)
- embedded (1)
- enzyme reactions (1)
- estrogenic activity (1)
- fertilizer (1)
- flexible plastics (1)
- gesintert (1)
- glass fibre paper (1)
- gold nanoparticles (1)
- graphene (1)
- high entropy alloys (1)
- hydrate (1)
- hydrogen storage (1)
- i-TRIBOMAT (1)
- i.S.Sy.Da.T.A. (1)
- iChip (1)
- immunoassay (1)
- in situ template (NaCl) (1)
- infrared Thermography (1)
- injection moulded (1)
- irreproducibility (1)
- isotope reference material (1)
- lN2 (1)
- lank characterization (1)
- layered soil (1)
- ligand binding assay (1)
- mXRF Micro-X-ray fluorescence spectroscopy (1)
- macroporous carbon (1)
- maghemite (1)
- magnetic nanocatalysts (1)
- magnetic saturation (1)
- materials informatics (1)
- mechanochemical synthesis (1)
- mechanochemistry (1)
- melamine (1)
- microspectroscopy (1)
- microstructural changes (1)
- molecular dynamics (1)
- monoclonal antibody (1)
- mortar method (1)
- multilayer graphene (1)
- nanocomposites (1)
- nanotechnology (1)
- neutron diffraction (1)
- non-specific binding (1)
- nutritional supplements (1)
- openBIS (1)
- optimale Überdeckungshöhe (1)
- oxidation (1)
- oxidation state (1)
- oxidative stress (1)
- pH (1)
- pH Indicator (1)
- pH probe (1)
- pUC19 (1)
- pXRF (1)
- paper retraction (1)
- peer reviewimmunochemistry (1)
- phosphorous flame retardant (1)
- photoluminescence (1)
- polyionic liquids (1)
- pore structure (1)
- progressive hepatolenticular degeneration (1)
- protein binding (1)
- proton conductors (1)
- pyrazinamide (1)
- qPCR (1)
- quality control (1)
- replication (1)
- reproducibility crisis (1)
- research landscape (1)
- reversible addition fragmentation chain transfer (RAFT) polymerization (1)
- rubber (1)
- scanning electron microscopy (1)
- selectivity (1)
- self-replication (1)
- sensing (1)
- serine-protease inhibitor (1)
- silica nanoparticles (1)
- silver nanoparticles (1)
- single molecule spectroscopy (1)
- single-molecule analysis (1)
- sliding simulation (1)
- soil (1)
- spICP-MS (1)
- species-specific isotope information (1)
- spectral elements (1)
- spray (1)
- ssNMR spectroscopy (1)
- structural information (1)
- sulfidation (1)
- surface and in-depth inspection (1)
- surface enhanced Raman scattering (1)
- synchrotron X-ray diffraction (1)
- synthesize heteroatom (1)
- tandard addition (1)
- temeprature dependent exchange length (1)
- temperature (1)
- thermal decomposition (1)
- thermophysical properties (1)
- thrombocyte adhesion (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
- titania nanoparticles (1)
- transmission mode (1)
- underexplored phyla (1)
- upconverting nanoparticles (UCNPs) (1)
- µ-gravity (1)
- µCT (1)
- Überdruckverfahren (1)
- α-1,4- and α-1,6-glucans (1)
- β-Lactam (1)
- γ-H2AX assay (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- μCT-analysis (1)
- ‘Green’ pesticide (1)
- “leaky” mutant (1)
Organisationseinheit der BAM
- 6 Materialchemie (428)
- 1 Analytische Chemie; Referenzmaterialien (353)
- 8 Zerstörungsfreie Prüfung (314)
- 9 Komponentensicherheit (202)
- 5 Werkstofftechnik (199)
- 7 Bauwerkssicherheit (182)
- 4 Material und Umwelt (178)
- 6.3 Strukturanalytik (166)
- 8.5 Röntgenbildgebung (119)
- 6.1 Oberflächen- und Dünnschichtanalyse (97)
Paper des Monats
- ja (68)
High-resolution continuum source graphite furnace molecular absorption spectrometry (HR-CS-GF-MAS) was employed for determining adsorbable organic chlorine (AOCl) in water. Organic chlorine was indirectly quantified by monitoring the molecular absorption of the transient aluminum monochloride molecule (AlCl) around a wavelength of 261.42 nm in a graphite furnace. An aluminum solution was used as the molecularforming modifier. A zirconium coated graphite furnace, as well as Sr and Ag solutions were applied as modifiers for a maximal enhancement of the absorption signal. The pyrolysis and vaporization temperatures were 600 °C and 2300 °C, respectively. Non-spectral interferences were observed with F, Br, and I at concentrations higher than 6 mg L-1, 50 mg L-1, and 100 mg L-1, respectively. Calibration curves with NaCl, 4-chlorophenol, and trichlorophenol present the same slope and dynamic range, which indicates the chlorine atom specificity of the method. This method was evaluated and validated using synthetic water samples, following the current standard DIN EN ISO 9562:2004 for the determination of the sum parameter adsorbable organic halides (AOX) for water quality. These samples contain 4-chlorophenol as the chlorinated organic standard in an inorganic chloride matrix. Prior to analysis, organic chlorine was extracted from the inorganic matrix via solid-phase extraction with a recovery rate >95%. There were no statistically significant differences observed between measured and known values and for a t-test a confidence level of 95% was achieved. The limits of detection and characteristic mass were found to be 48 and 22 pg, respectively. The calibration curve was linear in the range 0.1–2.5 ng with a correlation coefficient R2 = 0.9986.
A controlled, reproducible, gram-scale method is reported for the covalent functionalization of graphene Sheets by a one-pot nitrene [2+1] cycloaddition reaction under mild conditions. The reaction between commercially available 2,4,6-trichloro-1,3,5-triazine and sodium azide with thermally reduced graphene oxide (TRGO) results in defined dichlorotriazine-functionalized sheets. The different reactivities of the chlorine substituents on the functionalized graphene allow stepwise post-modification by manipulating the temperature.
This new method provides unique access to defined bifunctional 2D nanomaterials, as exemplified by chiral surfaces and multifunctional hybrid architectures.
Predictable Peptide Conjugation Ratios by Activation of Proteins with Succinimidyl Iodoacetate (SIA)
(2017)
The small heterobifunctional linker succinimidyl iodoacetate (SIA) was examined for the preparation of peptide–protein bioconjugates with predicable conjugation ratios. For many conjugation protocols, the protein is either treated with a reductant to cleave disulfide bonds or is reacted with thiolation chemicals, such as Traut’s reagent. Both approaches are difficult to control, need individual optimization and often lead to unsatisfactory results. In another popular approach, a heterobifunctional linker with a N-hydroxysuccinimide (NHS) and a maleimide functionality is applied to the protein. After the activation of some lysine ε-amino groups with the NHS ester functionality, a cysteine-containing peptide is attached to the activated carrier protein via maleimide. Particularly, the maleimide reaction leads to some unwanted byproducts or even cleavage of the linker. Many protocols end up with conjugates with unpredictable and irreproducible conjugation ratios. In addition, the maleimide-thiol addition product should be assumed immunogenic in vivo. To avoid these and other disadvantages of the maleimide approach, we examined the known linker succinimidyl iodoacetate (SIA) in more detail and developed two protocols, which lead to peptide–protein conjugates with predefined average conjugation ratios. This holds potential to eliminate tedious and expensive optimization steps for the synthesis of a bioconjugate of optimal composition.
Hepcidin-25 was identified as the main iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II)-binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1% ammonia. Further, mass spectrometry (tandem mass spectrometry (MS/MS), high-resolution mass spectrometry HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or reference material comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others.
Starch is one of the most common and easily obtained natural polymers, making it attractive as a potential bio-based alternative to synthetic polymers. This study shows that a simple quaternary ammonium salt combined with urea or glycols forms effective modifiers that produce flexible plastics with good mechanical properties that are comparable to some polyolefin plastics. The processing conditions are shown to significantly affect the structure of the polymer which has a concomitant effect upon the mechanical and physical properties of the resulting plastic. Using a glycerol based modifier results in a totally sustainable and biodegradable material which can be injection moulded.
Plants and microorganisms, besides the climate, drive nitrogen (N) cycling in ecosystems. Our objective was to investigate N losses and N acquisition strategies along a unique ecosystem-sequence (ecosequence) ranging from arid shrubland through Mediterranean woodland to temperate rainforest. These ecosystems differ in mean annual precipitation, mean annual temperate, and vegetation cover, but developed on similar granitoid soil parent material, were addressed using a combination of molecular biology and soil biogeochemical tools. Soil N and carbon (C) contents, δ15N signatures, activities of N acquiring extracellular enzymes as well as the abundance of soil bacteria and fungi, and diazotrophs in bulk topsoil and rhizosphere were determined. Relative fungal abundance in the rhizosphere was higher under woodland and forest than under shrubland. This indicates toward plants' higher C investment into fungi in the Mediterranean and temperate rainforest sites than in the arid site. Fungi are likely to decompose lignified forest litter for efficient recycling of litter-derived N and further nutrients. Rhizosphere—a hotspot for the N fixation—was enriched in diazotrophs (factor 8 to 16 in comparison to bulk topsoil) emphasizing the general importance of root/microbe association in N cycle. These results show that the temperate rainforest is an N acquiring ecosystem, whereas N in the arid shrubland is strongly recycled. Simultaneously, the strongest 15N enrichment with decreasing N content with depth was detected in the Mediterranean woodland, indicating that N mineralization and loss is highest (and likely the fastest) in the woodland across the continental transect. Higher relative aminopeptidase activities in the woodland than in the forest enabled a fast N mineralization. Relative aminopeptidase activities were highest in the arid shrubland. The highest absolute chitinase activities were observed in the forest. This likely demonstrates that (a) plants and microorganisms in the arid shrubland invest largely into mobilization and reutilization of organically bound N by exoenzymes, and (b) that the ecosystem N nutrition shifts from a peptide-based N in the arid shrubland to a peptide- and chitin-based N nutrition in the temperate rainforest, where the high N demand is complemented by intensive N fixation in the rhizosphere.
Iron aluminides, already reported in the late 19th century, did not cease to attract the interest of scientists and engineers ever since. Besides good oxidation resistance, low density and resource availability, potentials for hightemperature strengths that compete with high-alloy steels were unlocked by low alloy contents. Still, research on alloy design continues, as alloying usually comes at the price of brittleness in low-temperature regimes. A potential candidate is the quinary Fe–Al–Mo–Ti–B system which is strengthened by solid solution and eutectic borides. It was shown to have good strength and outstanding creep resistance under compressive loading up to elevated temperatures. Although the individual effect of alloy additions is well understood in iron aluminides, little is known about the combined effects of alloying concentrations on microstructure, phase stability and mechanical properties. Therefore a systematic study of two Ti-doped near-Fe3Al alloys with varying contents of Mo (2–4 at.%) and B (0.5–1 at.%) was conducted. In total eight different alloys were fabricated by investment casting into ceramic shell molds. Alloys were characterized and compared by grain size, phase transitions, microstructure evolution as well as elemental compositions and volume fractions of phases. For mechanical characterization, macrohardness and microhardness tests as well as tensile tests at ambient and high tempera tures were conducted. Independent of alloy additions, alloys with 24–25 at.% Al exhibit superior proof strength due to a higher matrix hardness. Decreasing B content generally decreases strength by lower secondary phase fractions which contribute via particle hardening. Reducing Mo content decreases both the solute concentration in the matrix and secondary phase fractions. Surprisingly, strength is similar or even superior to alloys with higher Mo content. Strength relations are discussed with a focus on solid-solution hardening theory and other competing strengthening mechanisms.
In 2018, the production of Municipal SolidWaste (MSW) in EU-28 reached 250.6 Mt, with the adoption of different management strategies, involving recycling (48 wt %), incineration and thermal valorization (29 wt %) and landfilling (23 wt %). This work was based on the analysis of the baseline situation of MSW management in EU-28 in 2018, considering its progress in 2008–2018, and discussed the possible improvement perspectives based on a framework involving incineration and recycling as the only possible alternatives, specifically evaluating the capability of already-existing incineration plants to fulfill the EU needs in the proposed framework. The results of the assessment showed two main crucial issues that could play a pivotal role in the achievement of Circular Economy action plan targets: the need to increase the recycling quotas for specific MSW fractions through the separate collection, and therefore the improvement of definite treatment process chains; the optimization of the recovery of secondary raw materials from incineration bottom ash, involving the Recycling of ferrous and nonferrous metals and the mineral fraction. Both issues need to find an extensive application across all member states to decrease the actual differences in the adoption of sustainable MSW management options.
The main obstacle to bottom ash (BA) being used as a recycling aggregate is the content of salts and potential toxic elements (PTEs), concentrated in a layer that coats BA particles. This work presents a dry treatment for the removal of salts and PTEs from BA particles. Two pilotscale abrasion units (with/without the removal of the fine particles) were fed with different BA samples. The performance of the abrasion tests was assessed through the analyses of particle size and moisture, and that of the column leaching tests at solid-to-liquid ratios between 0.3 and 4.
The results were: the particle-size distribution of the treated materials was homogeneous (25 wt % had dimensions <6.3 mm) and their moisture halved, as well as the electrical conductivity of the leachates. A significant decrease was observed in the leachates of the treated BA for sulphates (44%), chlorides (26%), and PTEs (53% Cr, 60% Cu and 8% Mo). The statistical analysis revealed good correlations between chloride and sulphate concentrations in the leachates with Ba, Cu, Mo, and Sr, illustrating the consistent behavior of the major and minor components of the layer surrounding BA particles. In conclusion, the tested process could be considered as promising for the improvement of BA valorization.
"INFRASTAR aims to develop knowledge, expertise and skills for optimal and reliable management of structures. The generic methodology is applied to bridges and wind turbines in relation to fatigue offering the opportunity to deal with complementary notions (such as old and new asset management, unique and similar structures, wind and traffic actions) while addressing 3 major challenges: 1/ advanced modelling of concrete fatigue behaviour, 2/new non destructive testing methods for early aged damage detection and 3/probabilistic approach of structure reliability under fatigue. Benefit of cross-experience and inter-disciplinary synergies creates new knowledge. INFRASTAR proposes innovative solutions for civil infrastructure asset management so that young scientists acquire a high employment profile in close dialogue between industry and academic partners. Modern engineering methods, including probabilistic approaches, risk and reliability assessment tools, will take into account the effective structural behaviour of existing bridges and wind turbines by exploiting monitored data. Existing methods and current state-of -the art is based on excessive conservatism which produces high costs and hinders sustainability. INFRASTAR improves knowledge for optimising the design of new structures, for more realistic verification of structural safety and more accurate prediction of future lifetime of the existing structures. That is a challenge for a sustainable development because it reduces building material and energy consumption as well as CO2 production. Within the global framework of optimal infrastructure asset management, INFRASTAR will result in a multi-disciplinary body of knowledge covering generic problems from the design stage process of the new civil infrastructures up to recycling after dismantlement. This approach and the proposed methods and tools are new and allow a step forward for innovative and effective process."
Tracking waterborne microplastic (MP) in urban areas is a challenging task because of the various sources and transport pathways involved. Since MP occurs in low concentrations in most wastewater and stormwater streams, large sample volumes need to be captured, prepared, and carefully analyzed. The recent research in urban areas focused mainly on MP emissions at wastewater treatment plants (WWTPs), as obvious entry points into receiving waters. However, important transport pathways under wet-weather conditions are yet not been investigated thoroughly. In addition, the lack of comprehensive and comparable sampling strategies complicated the attempts for a deeper understanding of occurrence and sources. The goal of this paper is to (i) introduce and describe sampling strategies for MP at different locations in a municipal catchment area under dry and wet-weather conditions, (ii) quantify MP emissions from the entire catchment and two other smaller ones within the bigger catchment, and (iii) compare the emissions under dry and wet-weather conditions. WWTP has a high removal rate of MP (>96%), with an estimated emission rate of 189 kg/a or 0.94 g/[population equivalents (PEQ · a)], and polyethylene (PE) as the most abundant MP. The specific dry-weather emissions at a subcatchment were ≈30 g/(PEQ · a) higher than in the influent of WWTP with 23 g/(PEQ · a). Specific wet-weather emissions from large sub-catchment with higher traffic and population densities were 1952 g/(ha · a) higher than the emissions from smaller catchment (796 g/[ha · a]) with less population and traffic. The results suggest that wet-weather transport pathways are likely responsible for 2–4 times more MP emissions into receiving waters compared to dry-weather ones due to tire abrasion entered from streets through gullies. However, more investigations of wet-weather MP need to be carried out considering additional catchment attributes and storm event characteristics.
Phosphotyrosine residues are essential functional switches in health and disease. Thus, phosphotyrosine biomimetics are crucial for the development of chemical tools and drug molecules. We report here the discovery and investigation of pentafluorophosphato amino acids as novel phosphotyrosine biomimetics. A mild acidic pentafluorination protocol was developed and two PF5-amino acids were prepared and employed in peptide synthesis. Their structures, reactivities, and fluorine-specific interactions were studied by NMR and IR spectroscopy, X-ray diffraction, and in bioactivity assays. The mono-anionic PF5 motif displayed an amphiphilic character binding to hydrophobic surfaces, to water molecules, and to protein-binding sites, exploiting charge and H−F-bonding interactions. The novel motifs bind 25- to 30-fold stronger to the phosphotyrosine binding site of the protein tyrosine phosphatase PTP1B than the best current biomimetics, as rationalized by computational methods, including molecular dynamics simulations.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
Background. Currently, there is no reliable nonsurgical treatment for abdominal aortic aneurysm (AAA). This study, therefore, investigates if doxycycline reduces AAA growth and the number of rupture-related deaths in a murine ApoE−/− model of AAA and whether gadofosveset trisodium-based MRI differs between animals with and without doxycycline treatment. Methods. Nine ApoE−/− mice were implanted with osmotic minipumps continuously releasing angiotensin II and treated with doxycycline (30 mg/kg/d) in parallel. After four weeks, MRI was performed at 3T with a clinical dose of the albumin-binding probe gadofosveset (0.03 mmol/kg). Results were compared with previously published wild-type control animals and with previously studied ApoE−/− animals without doxycycline treatment. Differences in mortality were also investigated between these groups. Results. In a previous study, we found that approximately 25% of angiotensin II-infused ApoE−/− mice died, whereas in the present study, only one out of 9 angiotensin II-infused and doxycycline-treated ApoE−/− mice (11.1%) died within 4 weeks. Furthermore, doxycycline-treated ApoE−/− mice showed significantly lower contrast-to-noise (CNR) values in MRI compared to ApoE−/− mice without doxycycline treatment. In vivo measurements of relative signal enhancement (CNR) correlated significantly with ex vivo measurements of albumin staining (R2 = 0.58). In addition, a strong visual colocalization of albumin-positive areas in the fluorescence albumin staining with gadolinium distribution in LA-ICP-MS was shown. However, no significant difference in aneurysm size was observed after doxycycline treatment. Conclusion. The present experimental in vivo study suggests that doxycycline treatment may reduce rupture-related deaths in AAA by slowing endothelial damage without reversing aneurysm growth.
Abdominal aortic aneurysm (AAA) is a life-threatening vascular disease with an up to 80% mortality in case of rupture. Current biomarkers fail to account for size-independent risk of rupture. By combining the information of different molecular probes, multi-target molecular MRI holds the potential to enable individual characterization of AAA. In this experimental study, we aimed to examine the feasibility of simultaneous imaging of extracellular collagen and inflammation for size-independent prediction of risk of rupture in murine AAA. The study design consisted of: (1) A outcome-based longitudinal study with imaging performed once after one week with follow-up and death as the end-point for assessment of rupture risk. (2) A week-by-week study for the characterization of AAA development with imaging after 1, 2, 3 and 4 weeks. For both studies, the animals were administered a type 1 collagen-targeted gadolinium-based probe (surrogate marker for extracellular matrix (ECM) remodeling) and an iron oxide-based probe (surrogate marker for inflammatory activity), in one imaging session. In vivo measurements of collagen and iron oxide probes showed a significant correlation with ex vivo histology (p < 0.001) and also corresponded well to inductively-coupled plasma-mass spectrometry and laser-ablation inductively-coupled plasma mass spectrometry. Combined evaluation of collagen-related ECM remodeling and inflammatory activity was the most accurate predictor for AAA rupture (sensitivity 80%, specificity 100%, area under the curve 0.85), being superior to information from the individual probes alone. Our study supports the feasibility of a simultaneous assessment of collagen-related extracellular matrix remodeling and inflammatory activity in a murine model of AAA.
Abdominal aortic aneurysm (AAA) remains a fatal disease. Its development encompasses a complex interplay between hemodynamic stimuli on and changes in the arterial wall. Currently available biomarkers fail to predict the risk of AAA rupture independent of aneurysm size. Therefore, novel biomarkers for AAA characterization are needed. In this study, we used a mouse model of AAA to investigate the potential of magnetic resonance imaging (MRI) with an albumin-binding probe to assess changes in vascular permeability at different stages of aneurysm growth. Two imaging studies were performed: a longitudinal study with follow-up and death as endpoint to predict rupture risk and a week-by-week study to characterize AAA development. AAAs, which eventually ruptured, demonstrated a significantly higher in vivo MR signal enhancement from the albumin-binding probe (p = 0.047) and a smaller non-enhancing thrombus area compared to intact AAAs (p = 0.001). The ratio of albumin-binding-probe enhancement of the aneurysm wall to size of non-enhancing-thrombus-area predicted AAA rupture with high sensitivity/specificity (100%/86%). More advanced aneurysms with higher vascular permeability demonstrated an increased uptake of the albumin-binding-probe. These results indicate that MRI with an albumin-binding probe may enable noninvasive assessment of vascular permeability in murine AAAs and prediction of rupture risk.
Background: Prevention of metastatic invasion is one of the main challenges in the treatment of alveolar rhabdomyosarcoma. Still the therapeutic options are limited. Therefore, an anti-tumor screening was initiated focusing on the anti-metastatic and anti-invasion properties of selected medicinal plant extracts and phytoestrogens, already known to be effective in the prevention and treatment of different cancer entities.
Methods: Treatment effects were first evaluated by cell viability, migration, invasion, and colony forming assays on the alveolar rhabdomyosarcoma cell line RH-30 in comparison with healthy primary cells.
Results: Initial anti-tumor screenings of all substances analyzed in this study, identified the plant extract of Vincetoxicum arnottianum (VSM) as the most promising candidate, harboring the highest anti-metastatic potential. Those significant anti-motility properties were proven by a reduced ability for migration (60%), invasion (99%) and colony formation (61%) under 48 h exposure to 25 μg/ml VSM. The restricted motility features were due to an induction of the stabilization of the cytoskeleton – actin fibers were 2.5-fold longer and were spanning the entire cell. Decreased proliferation (PCNA, AMT, GCSH) and altered metastasis (e. g. SGPL1, CXCR4, stathmin) marker expression on transcript and protein level confirmed the significant lowered tumorigenicity under VSM treatment. Finally, significant alterations in the cell metabolism were detected for
25 metabolites, with levels of uracil, N-acetyl serine and propanoyl phosphate harboring the greatest alterations. Compared to the conventional therapy with cisplatin, VSM treated cells demonstrated a similar metabolic shutdown of the primary cell metabolism. Primary control cells were not affected by the VSM treatment.
Conclusions: This study revealed the VSM root extract as a potential, new migrastatic drug candidate for the putative treatment of pediatric alveolar rhabdomyosarcoma with actin filament stabilizing properties and accompanied by a marginal effect on the vitality of primary cells.
Nanotechnology has enabled the discovery of a multitude of novel materials exhibiting unique physicochemical (PChem) properties compared to their bulk analogues. These properties have led to a rapidly increasing range of commercial applications; this, however, may come at a cost, if an association to long-term health and environmental risks is discovered or even just perceived. Many nanomaterials (NMs) have not yet had their potential adverse biological effects fully assessed, due to costs and time constraints associated with the experimental assessment, frequently involving animals. Here, the available NM libraries are analyzed for their suitability for integration with novel nanoinformatics approaches and for the development of NM specific Integrated Approaches to Testing and Assessment (IATA) for human and environmental risk assessment, all within the NanoSolveIT cloud-platform. These established and well-characterized NM libraries (e.g. NanoMILE, NanoSolutions, NANoREG, NanoFASE, caLIBRAte, NanoTEST and the Nanomaterial Registry (>2000 NMs)) contain physicochemical characterization data as well as data for several relevant biological endpoints, assessed in part using harmonized Organisation for Economic Co-operation and Development (OECD) methods and test guidelines.
Integration of such extensive NM information sources with the latest nanoinformatics methods will allow NanoSolveIT to model the relationships between NM structure (morphology), properties and their adverse effects and to predict the effects of other NMs for which less data is available. The project specifically addresses the needs of regulatory agencies and industry to effectively and rapidly evaluate the exposure, NM hazard and risk from nanomaterials and nano-enabled products, enabling implementation of computational ‘safe-by-design’ approaches to facilitate NM commercialization.
The current furfural production yield is low due to the use of non-selective homogeneous catalysts and expensive separation. In this work, partially hydroxylated MgF2 catalysts, synthesized using different water contents, were screened during xylose dehydration in watertoluene at 160 °C. The different Lewis/Brønsted ratios on the MgF2 catalysts showed that under-coordinated Mg can isomerize xylose to xylulose, whilst the surface OH-groups were responsible for the dehydration reactions. The presence of glucose as a co-carbohydrate reduced the furfural selectivity from 86 to 81%, whilst it also led to high 5-hydroxymethylfurfural selectivity. The tests catalyzed by MgF2 in combination with simultaneous N2-stripping showed that a furfural selectivity of 87% could be achieved using low xylose loadings. Moreover, the catalysts regenerated by H2O2 showed high activity during the dehydration tests in watertoluene at 160 °C.
Spectroscopy in Catalysis
(2020)
Knowledge-based catalyst development is always an interaction between preparation, analysis and catalytic testing. Only if these three factors fit together can success be expected. For the analytic side of this triangle, spectroscopic methods play a crucial role. Whereas with diffraction, scattering and microscopy, decisive insights into the structure and morphology of the catalysts can be obtained, spectroscopy produces new knowledge about the chemical nature of the catalyst, e.g., its bonding and valence states.
The properties of the encapsulant are critical to the long-term performance of photovoltaic (PV) modules under the influence of sunlight including UV, elevated temperature, humidity and diffusion of oxygen. Encapsulation process represents a bout 40% of the whole PV module cost. The introduction of new non-EVA encapsulant material type "Low-Cost, High-Performance" should provide a solution to outdoor yellowing degradation problems. The emerging encapsulant materials exhibit a good compatibility with emerging PV solar cells for long term durability. This new generation of encapsulant materials has the advantage to improve e the PV module performances and long term durability for specific climate like desert regions. This scientific contribution presents an overview of the different encapsulant materials currently on the market, the general requirements of the emerging encapsulant materials and characterizations techniques for degradation, diagnostic and reliability lifetime estimation in the framework of Algerian renewable energy strategy.
Photon upconversion upon 1550 nm excitation is of high relevance for applications in the third biological excitation window, for photovoltaics beyond current limitations, and enables appealing options in the field of glass Fiber telecommunications. Trivalent doped erbium ions (Er3+) are the material of choice for 1550 nm excited upconversion, however, they suffer from a low absorption cross-section and a low brightness. Therefore, the ability of Silicon metasurfaces to provide greatly enhanced electrical near-fields is employed to enable efficient photon upconversion even at low external Illumination conditions. Hexagonally shaped β-NaYF4:Er3+ nanoparticles are placed on large-area silicon metasurfaces designed to convert near-infrared (1550 nm) to visible light. More than 2400-fold enhanced photon upconversion luminescence is achieved by using this metasurface instead of a planar substrate.
With the aid of optical simulations based on the finite-element method, this result is attributed to the coupling of the excitation source with metasurface resonances at appropriate incident angles. Analysis of the excitation power density dependence of upconversion luminescence and red-to-green-emission ratios enables the estimation of nanoscale near-field enhancement on the metasurface. The findings permit the significant reduction of required external excitation intensities for photon upconversion of 1550 nm light, opening perspectives in biophotonics, telecommunication, and photovoltaics.
Condensation particle counters (CPCs) are widely used for the measurement of aerosol particle number concentrations in the size range from approximately 3 nm to 3 μm. For an SI-traceable calibration of the size-dependent counting efficiency, which is advisable on a regular basis and required in several applications, Faraday cup aerosol electrometers (FCAEs) are considered to be a suitable SI-traceable reference.While the volumetric aerosol inlet flowrate and the electrical current measurement in FCAEs can be related to respective SI references, inter-comparison exercises for FCAEs are still performed on a regular basis to establish reliable uncertainty budgets and to further investigate the influences of designs and operational parameters on comparability. This is strongly demanded in the international community of metrological institutes and aerosol calibration facilities around the world, which provide CPC calibrations. In the present study, the performance of FCAEs was investigated,using Ag test aerosol particles with a 30 nm particle diameter by varying the inlet flowrates from 0.5 l min−1 to 4 l min−1. From our experimental results, significant deviations were observed in FCAE currents at sample flowrates smaller than 1.5 l min−1. It is recommended that these discrepancies should be quantified before an FCAE is used for CPC calibration at low sample flowrates and small particle sizes in the sub-30 nm size range.
In this paper we propose super resolution measurement and post-processing strategies that can be applied in thermography using laser line scanning. The implementation of these techniques facilitates the separation of two closely spaced defects and avoids the expected deterioration of spatial resolution due to heat diffusion. The experimental studies were performed using a high-power laser as heat source in combination with pulsed thermography measurements (step scanning) or with continuous heating measurements (continuous scanning). Our work shows that laser line step scanning as well as continuous scanning both can be used within our developed super resolution (SR) techniques. Our SR techniques make use of a compressed sensing based algorithm in post- processing, the so-called iterative joint sparsity (IJOSP) approach. The IJOSP method benefits from both - the sparse nature of defects in space as well as from the similarity of each measurement. In addition, we show further methods to improve the reconstruction quality e.g. by simple manipulations in thermal image processing such as by considering the effect of the scanning motion or by using different optimization algorithms within the IJOSP approach. These super resolution image processing methods are discussed so that the advantages and disadvantages of each method can be extracted. Our contribution thus provides new approaches for the implementation of super resolution techniques in laser line scanning thermography and informs about which experimental and post-processing parameters should be chosen to better separate two closely spaced defects.
Laser excited super resolution thermal imaging for nondestructive inspection of internal defects
(2020)
A photothermal super resolution technique is proposed for an improved inspection of internal defects. To evaluate the potential of the laser-based thermographic technique, an additively manufactured stainless steel specimen with closely spaced internal cavities is used. Four different experimental configurations in transmission, reflection, stepwise and continuous scanning are investigated. The applied image post-processing method is based on compressed sensing and makes use of the block sparsity from multiple measurement events. This concerted approach of experimental measurement strategy and numerical optimization enables the resolution of internal defects and outperforms conventional thermographic inspection techniques.
We combine three different approaches to greatly enhance the defect reconstruction ability of active thermographic testing. As experimental approach, laser-based structured illumination is performed in a step-wise manner. As an intermediate signal processing step, the virtual wave concept is used in order to effectively convert the notoriously difficult to solve diffusion-based inverse problem into a somewhat milder wavebased inverse problem. As a final step, a compressed-sensing based optimization procedure is applied which efficiently solves the inverse problem by making advantage of the joint sparsity of multiple blind measurements. To evaluate our proposed processing technique, we investigate an additively manufactured stainless steel sample with eight internal defects. The concerted super resolution approach is compared to conventional thermographic reconstruction techniques and shows an at least four times better spatial resolution.
The embrittlement of metallic alloys by liquid metals leads to catastrophic material failure and severely impacts their structural integrity. The weakening of grain boundaries by the ingress of liquid metal and preceding segregation in the solid are thought to promote early fracture. However, the potential of balancing between the segregation of cohesion-enhancing interstitial solutes and embrittling elements inducing grain boundary decohesion is not understood. Here, we unveil the mechanisms of how boron segregation mitigates the detrimental effects of the prime embrittler, zinc, in a Σ5 [0 0 1] tilt grain boundary in α −Fe (4 at.% Al). Zinc forms nanoscale segregation patterns inducing structurally and compositionally complex grain boundary states. Ab-initio simulations reveal that boron hinders zinc segregation and compensates for the zinc induced loss in grain boundary cohesion. Our work sheds new light on how interstitial solutes intimately modify grain boundaries, thereby opening pathways to use them as dopants for preventing disastrous material failure.
Aiming at the overall negative surface charge of bacteria, a new strategy of antibacterial agents based on large polymer-modified graphene oxide (GO) sheets is assessed. The presented flexible, polycationic Sheets match the size and charge density of the Escherichia coli surface charge density (2 × 1014 cm−2). These matching parameters create an unspecific but very strong bacteria adsorber by multivalent, electrostatic attraction.
Their interaction with bacteria is visualized via atomic force and confocal microscopy and shows that they effectively bind and wrap around E. coli cells, and thereby immobilize them. The incubation of Gram-negative and -positive bacteria (E. coli and methicillin-resistant Staphylococcus aureus, MRSA) with these polycationic sheets leads to the inhibition of proliferation and a reduction of the colony forming bacteria over time.
This new type of antibacterial agent acts in a different mode of Action than classical biocides and could potentially be employed in medicinal, technical, or agriculture applications. The presented microsheets and their unspecific binding of cell interfaces could further be employed as adsorber material for bacterial filtration or immobilization for imaging, analysis, or sensor technologies.
We report on the ferromagnetism of Sn1-xZnxO2 (x < 0.1) hierarchical nanostructures with various morphologies synthesized by a solvothermal route. A room temperature ferromagnetic and paramagnetic response was observed for all compositions, with a maximum in ferromagnetism for x = 0.04. The ferromagnetic behaviour was found to correlate with the presence of zinc on substitutional Sn sites and with a low oxygen vacancy concentration in the samples. The morphology of the nanostructures varied with zinc concentration. The strongest ferromagnetic response was observed in nanostructures with well-formed shapes, having nanoneedles on their surfaces. These nanoneedles consist of (110) and (101) planes, which are understood to be important in stabilizing the ferromagnetic defects. At higher zinc concentration the nanostructures become eroded and agglomerated, a phenomenon accompanied with a strong decrease in their ferromagnetic response. The observed trends are explained in the light of recent computational studies that discuss the relative stability of ferromagnetic defects on various surfaces and the role of oxygen vacancies in degrading ferromagnetism via an increase in free electron concentration.
A systematic study has been carried out to investigate the neutron transmission signal as a function of sample temperature. In particular, the experimentally determined wavelength-dependent neutron attenuation spectra for a martensitic steel at temperatures ranging from 21 to 700°C are compared with simulated data. A theoretical description that includes the Debye–Waller factor in order to describe the temperature influence on the neutron cross sections was implemented in the nxsPlotter software and used for the simulations. The analysis of the attenuation coefficients at varying temperatures shows that the missing contributions due to elastic and inelastic scattering can be clearly distinguished: while the elastically scattered intensities decrease with higher temperatures, the inelastically scattered intensities increase, and the two can be separated from each other by analysing unique sharp features in the form of Bragg edges. This study presents the first systematic approach to quantify this effect and can serve as a basis , for example, to correct measurements taken during in situ heat treatments, in many cases being a prerequisite for obtaining quantifiable results.
Machine learning-assisted equivalent circuit identification for dielectric spectroscopy of polymers
(2024)
Polymers have become indispensable across fields of application, and understanding their structure–property relationships and dynamic behaviour is essential for performance optimization. Polymer membranes, particularly ion exchange membranes, play a crucial role in renewable energy conversion technologies, fuel cells, solar energy conversion, and energy storage. In this context, broadband dielectric spectroscopy (BDS) offers a powerful, non-destructive approach to investigate the electrical response and relaxation dynamics of polymers. These properties are investigated by parametrizing the system’s impedance response in terms of a network of circuit elements, i.e. the electrical equivalent circuit (EEC), whose impedance resembles the one of the system under investigation. However, the determination of the EEC from BDS data is challenging due to system complexity, interdependencies of circuit elements, and researcher biases. In this work, we propose a novel approach that incorporates a convolutional neural network (CNN) model to predict the EEC topology. By reducing user bias and enhancing data analysis, this approach aims to make BDS accessible to both experienced users and those with limited expertise. We show that the combination of machine learning and BDS provides valuable insights into the dynamic behaviour of polymer membranes, thus facilitating the design and characterization of tailored polymers for various applications. We also show that our model outperforms state-of-the-art machine learning methods with a top-5 accuracy of around 80% for predicting the circuit topology and a parameter fitting error as low as 0.05%.
Over the last few years, the Federal Institute for material research (BAM, Berlin) together with the Centre for the Study of Manuscript Cultures (CSMC, University of Hamburg) have initiated a systematic material investigation of black inks produced from Late Antiquity to the Middle Ages (ca. fourth century CE–fourteenth/fifteenth centuries CE), aimed primarily at extending and complementing findings from previous sporadic studies. Part of this systematic investigation has focused on Egyptian Coptic manuscripts, and the present preliminary study is one of its outputs. It centres on a corpus of 45 Coptic manuscripts—43 papyri and 2 ostraca—preserved at the Palau-Ribes and Roca-Puig collections in Barcelona. The manuscripts come from the Monastery of Apa Apollo at Bawit, one of the largest monastic settlements in Egypt between the Late Antiquity and the Early Islamic Period (sixth–eighth centuries CE). The composition of their black inks was investigated in situ using near-infrared reflectography (NIRR) and X-ray fluorescence (XRF). The analyses determined that the manuscripts were written using different types of ink: pure carbon ink; carbon ink containing iron; mixed inks containing carbon, polyphenols and metallic elements; and iron-gall ink. The variety of inks used for the documentary texts seems to reflect the articulate administrative system of the monastery of Bawit. This study reveals that, in contrast to the documents, written mostly with carbon-based inks, literary biblical texts were written with iron-gall ink. The frequent reuse of papyrus paper for certain categories of documents may suggest that carbon-based inks were used for ephemeral manuscripts, since they were easy to erase by abrasion.
Simulation-Assisted Augmentation of Missing Wedge and Region-of-Interest Computed Tomography Data
(2024)
This study reports a strategy to use sophisticated, realistic X-ray Computed Tomography (CT) simulations to reduce Missing Wedge (MW) and Region-of-Interest (RoI) artifacts in FBP (Filtered Back-Projection) reconstructions. A 3D model of the object is used to simulate the projections that include the missing information inside the MW and outside the RoI. Such information augments the experimental projections, thereby drastically improving the reconstruction results. An X-ray CT dataset of a selected object is modified to mimic various degrees of RoI and MW problems. The results are evaluated in comparison to a standard FBP reconstruction of the complete dataset. In all cases, the reconstruction quality is significantly improved. Small inclusions present in the scanned object are better localized and quantified. The proposed method has the potential to improve the results of any CT reconstruction algorithm.
The complex nature of liquid water saturation of polymer electrolyte fuel cell (PEFC) catalyst layers (CLs) greatly affects the device performance. To investigate this problem, we present a method to quantify the presence of liquid water in a PEFC CL using small-angle X-ray scattering (SAXS). This method leverages the differences in electron densities between the solid catalyst matrix and the liquid water filled pores of the CL under both dry and wet conditions. This approach is validated using ex situ wetting experiments, which aid the study of the transient saturation of a CL in a flow cell configuration in situ. The azimuthally integrated scattering data are fitted using 3D morphology models of the CL under dry conditions. Different wetting scenarios are realized in silico, and the corresponding SAXS data are numerically simulated by a direct 3D Fourier transformation. The simulated SAXS profiles of the different wetting scenarios are used to interpret the measured SAXS data which allows the derivation of the most probable wetting mechanism within a flow cell electrode.
The aim of this study is to develop nanometer-thin epoxy-based films on aluminium alloy AA2024-T3 as a model coating system for high resolution corrosion studies. Spin coating was used for the layer-by-layer (LbL) deposition of poly-(ethylenimine) (PEI) and poly([o-cresyl glycidyl ether]-co-formaldehyde) (CNER) bilayers. The film chemistry and the cross-linking process were characterized by means of Fourier-transform infrared spectroscopy (FTIR).
Ellipsometric data confirmed the linear increase of film thickness. The potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) results indicate the improvement of the film barrier properties with increasing film thickness. Mapping of the topography and the volta potential was performed by means of scanning Kelvin probe force microscopy (SKPFM).
The results indicate the presence of a homogeneous film structure, while the intermetallic phases can still be identified below the coating. The SKPFM Analysis confirmed that the model films are suitable for investigation of corrosion processes at the coating/metal interface.
The application of characterization methods with high spatial resolution to the analysis of buried coating/metal interfaces requires the design and use of model systems. Herein, an epoxy-like thin film is used as a model coating resembling the epoxy-based coatings and adhesives widely used in technical applications. Spin coating is used for the deposition of a 30 nm-thin bilayer (BL) composed of poly-(ethylenimine) (PEI) and poly[(o-cresyl glycidyl ether)-co-formaldehyde] (CNER). Fourier-transform infrared spectroscopy (FTIR) results confirm that the exposure of coated AA2024-T3 (AA) samples to the corrosive electrolyte solution does not cause the degradation of the polymer layer. In situ atomic force microscopy (AFM) studies are performed to monitor local corrosion processes at the buried interface of the epoxy-like film and the AA2024-T3 aluminum alloy surface in an aqueous electrolyte solution. Hydrogen evolution due to the reduction of water as the cathodic corrosion reaction leads to local blister formation. Based on the results of the complementary energy-dispersive X-ray spectroscopy (EDX) analysis performed at the same region of interest, most of the hydrogen evolved originates at the vicinity of Mg-containing intermetallic particles.
We introduce herein boron-dipyrromethene (BODIPY) dyes as a new class of fluorophores for the design of reporter dyes for supramolecular host–guest complex formation with cucurbit[7]uril (CB7). The BODIPYs contain a protonatable aniline nitrogen in the meso-position of the BODIPY chromophore, which was functionalized with known binding motifs for CB7. The unprotonated dyes show low fluorescence due to photoinduced electron transfer (PET), whereas the protonated dyes are highly fluorescent. Encapsulation of the binding motif inside CB7 positions the aniline nitrogen at the carbonyl rim of CB7, which affects the pKa value, and leads to a host-induced protonation and thus to a fluorescence increase. The possibility to tune binding affinities and pKa values
is demonstrated and it is shown that, in combination with the beneficial photophysical properties of BODIPYs, several new applications of host–dye reporter pairs can be implemented. This includes indicator displacement assays with favourable absorption and
emission wavelengths in the visible spectral region, fluorescence correlation spectroscopy, and noncovalent surface functionalization
with fluorophores.
Additive manufacturing offers a range of novel applications. However, the manufacturing process is complex and the production of almost defect-free parts with high reliability and durability is still a challenge. Thermography is a valuable tool for process surveillance, especially in metal additive manufacturing processes. The high process temperatures allow one to use cameras usually operating in the visible spectral range. Here, we compare the results of measurements during the manufacturing process of a commercial laser metal deposition setup using a mid wavelength infrared camera with those from a short wavelength infrared camera and those from a visual spectrum high-speed camera with band pass filter in the near infrared range.
Mass spectrometry-based proteomics provides a holistic snapshot of the entire protein set of living cells on a molecular level. Currently, only a few deep learning approaches exist that involve peptide fragmentation spectra, which represent partial sequence information of proteins. Commonly, these approaches lack the ability to characterize less studied or even unknown patterns in spectra because of their use of explicit domain knowledge. Here, to elevate unrestricted learning from spectra, we introduce ‘ad hoc learning of fragmentation’ (AHLF), a deep learning model that is end-to-end trained on 19.2 million spectra from several phosphoproteomic datasets. AHLF is interpretable, and we show that peak-level feature importance values and pairwise interactions between peaks are in line with corresponding peptide fragments. We demonstrate our approach by detecting post-translational modifications, specifically protein phosphorylation based on only the fragmentation spectrum without a database search. AHLF increases the area under the receiver operating characteristic curve (AUC) by an average of 9.4% on recent phosphoproteomic data compared with the current state of the art on this task. Furthermore, use of AHLF in rescoring search results increases the number of phosphopeptide identifications by a margin of up to 15.1% at a constant false discovery rate. To show the broad applicability of AHLF, we use transfer learning to also detect cross-linked peptides, as used in protein structure analysis, with an AUC of up to 94%.
In recent years, thermoextraction/desorption-gas chromatography/mass spectrometry (TED-GC/MS) has been developed as a rapid detection method for the determination of microplastics (MP) mass contents in numerous environmentally relevant matrices and, in particular, for the measurement of polymers in water samples without time-consuming sample preparation. The TED-GC/MS method was applied to investigate a typical European municipal wastewater system for possible MP masses. Such investigations are important in view of the recent revision of the Urban Wastewater Treatment Directive. Four different representative sampling sites were selected: greywater (domestic wastewater without toilet), combined sewer, and influent and effluent of a wastewater treatment plant (WWTP). All samples were collected by fractional filtration. Filtration was carried out over mesh sizes of 500, 100, 50, and in some cases, 5 µm. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were detected in all samples, with the PE fraction dominating in all cases. Styrene-butadiene rubber which serves as an indication of tire abrasion, was only found in the influent of the WWTP. The highest MP mass contents were found in the combined sewer, so MP can become a source of pollution during heavy rain events when the capacity limits of the effluent are reached, and the polluted effluent is released uncontrolled into the environment. Based on the studies, MP retention from the WWTP could be estimated to be approximately 96%. Few trends in polymer type or mass contents were detected within the different fractions of the samples or when comparing samples to each other.
In this study, 19 experiments were conducted with 25 pouch cells of NMC cathode to investigate thermal runaway and the release of gases from lithium-ion batteries (LIBs). Single cells, double cells, and a four-cell battery stack were forced to undergo thermal runaway inside an air-tight reactor vessel with a volume of 100 dm3 . The study involved two series of tests with two types of ignition sources. In the Series 1 tests, a heating plug was used to initiate thermal runaway in LIBs in the ranges of 80–89% and 90–100% SOC. In the Series 2 tests, a heating plate was used to trigger thermal runaway in LIBs in the ranges of 30–50%, 80–89%, and 90–100% SOC. Thermal runaway started at an onset temperature of 344 ± 5 K and 345 K for the Series 1 tests and from 393 ± 36 K to 487 ± 10 K for the Series 2 tests. Peak reaction temperatures ranged between 642 K and 1184 K, while the maximum pressures observed were between 1.2 bar and 7.28 bar. Thermal runaway induced explosion of the cells and lead to a rate of temperature increase greater than 10 K/s. The amounts of gases released from the LIBs were calculated from pressures and temperatures measured in the reactor.
Then, the gas composition was analyzed using a Fourier transform infrared (FTIR) spectrometer. The highest gaseous production was achieved at a range of 90–100% SOC and higher battery capacities 72 L, 1.8 L/Ah (Series 1, battery stack) and 103 L, 3.2 L/Ah (Series 2, 32 Ah cell)). Among the gases analyzed, the concentration of gaseous emissions such as C2H4 , CH4 , and C2H6 increased at a higher cell capacity in both series of tests. The study results revealed characteristic variations of thermal behavior with respect to the type of ignition source used.
Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway
(2023)
Lithium-based batteries have the potential to undergo thermal runaway (TR), during which mixtures of gases are released. The purpose of this study was to assess the explosibility of the gaseous emission from LIBs of an NMC-based cathode during thermal runaway. In the current project, a series of pouch lithium-based battery cells was exposed to abuse conditions (thermal) to study the total amount of gases released and the composition of the gas mixture. First, the battery cells were placed in a closed vessel, and the pressure and temperature rise inside the vessel were measured. In a second step, the composition of gases was analysed using a Fourier transform Infrared (FTIR) spectrometer.
We found that the amount of released gases was up to 102 ± 4 L, with a clear dependence on the battery capacity. This study showed that the concentration of gaseous emissions such as carbon monoxide (CO), methane (CH4), ethylene (C2H4), ethane (C2H6), and hydrogen cyanide (HCN) increased with higher cell capacity. Of the five studied flammable gases, the maximum concentrations of carbon monoxide (16.85 vol%), methane (7.6 vol%), and ethylene (7.86 vol%) were identified to be within their explosible range. Applying Le Chatelier’s law, a calculated lower explosion limit (LEL) of 7% in volume fraction was obtained for the gas mixture. The upper explosion limit (UEL) of the gas mixture was also found to be 31% in volume. A filter comprising pyrobubbles was used for the removal of the studied gas components released during the thermal abuse. The investigation revealed that the pyrobubbles filter was highly effect in the removal of HCN (up to 94% removal) and CO2 (up to 100% removal). Herein, we report the dependency of the method of thermal runaway trigger on the measured maximum temperature.
Currently, corrosion rates (CR) and/or corrosion products (CP) obtained for methanogen-induced microbiologically influenced corrosion (Mi-MIC) on carbon steel are mainly analyzed from static-incubations. By using a multiport-flow-column, much higher CRs (0.72 mm/yr) were observed, indicating static-incubations are not suitable for determining the corrosive potential of Mi-MIC. With the combination of various analytical methods (ToF-SIMS/SEM-EDS/SEM-FIB) and contrary to previously published data, we observed that CPs contained phosphorus, oxygen, magnesium, calcium and iron but lacked carbon-related species (e.g. siderite). Overall, siderite nucleation is disrupted by methanogens, as they convert aqueous bicarbonate into carbon dioxide for methanogenesis resulting in increased localized corrosion.
Currently, sulfate-reducing bacteria (SRB) is regarded as the main culprit of microbiologically influenced corrosion (MIC), mainly due to the low reported corrosion rates of other microorganisms. For example, the highest reported corrosion rate for methanogens is 0.065 mm/yr. However, by investigating methanogen-induced microbiologically influenced corrosion (Mi-MIC) using an in-house developed versatile multiport flow test column, extremely high corrosion rates were observed. We analyzed a large set of carbon steel beads, which were sectionally embedded into the test columns as substrates for iron-utilizing methanogen Methanobacterium IM1. After 14 days of operation using glass beads as fillers for section separation, the highest average corrosion rate of Methanobacterium IM1 was 0.2 mm/yr, which doubled that of Desulfovibrio ferrophilus IS5 and Desulfovibrio alaskensis 16109 investigated at the same conditions. At the most corroded region, nearly 80% of the beads lost 1% of their initial weight (fast-corrosion), resulting in an average corrosion rate of 0.2 mm/yr for Methanobacterium IM1-treated columns. When sand was used as filler material to mimic sediment conditions, average corrosion rates for Methanobacterium IM1 increased to 0.3 mm/yr (maximum 0.52 mm/yr) with over 83% of the beads having corrosion rates above 0.3 mm/yr. Scanning electron images of metal coupons extracted from the column showed methanogenic cells were clustered close to the metal surface. Methanobacterium IM1 is a hydrogenotrophic methanogen with higher affinity to metal than H2. Unlike SRB, Methanobacterium IM1 is not restricted to the availability of sulfate concentration in the environment. Thus, the use of the multiport flow column provided a new insight on the corrosion potential of methanogens, particularly in dynamic conditions, that offers new opportunities for monitoring and development of mitigation strategies. Overall, this study shows under certain conditions methanogenic archaea can cause higher corrosion than SRB, specific quantifications, i.e., maximum, average, and minimum corrosion rates can be determined, and that spatial statistical evaluations of MIC can be carried out.
Objectives: Using a murine model of multiple sclerosis, we previously showed that repeated administration of gadopentetate dimeglumine led to retention of gadolinium (Gd) within cerebellar structures and that this process was enhanced with inflammation. This study aimed to compare the kinetics and retention profiles of Gd in inflamed and healthy brains after application of the macrocyclic Gd-based contrast agent (GBCA) gadobutrol or the linear GBCA gadopentetate. Moreover, potential Gd-induced neurotoxicity was investigated in living hippocampal slices ex vivo.
Materials and Methods: Mice at peak of experimental autoimmune encephalomyelitis (EAE; n = 29) and healthy control mice (HC; n = 24) were exposed to a cumulative dose of 20 mmol/kg bodyweight of either gadopentetate dimeglumine or gadobutrol (8 injections of 2.5 mmol/kg over 10 days). Magnetic resonance imaging (7 T) was performed at baseline as well as at day 1, 10, and 40 post final injection (pfi) of GBCAs. Mice were sacrificed after magnetic resonance imaging and brain and blood Gd content was assessed by laser ablation-inductively coupled plasma (ICP)-mass spectrometry (MS) and ICP-MS, respectively. In addition, using chronic organotypic hippocampal slice cultures, Gd-induced neurotoxicity was addressed in living brain tissue ex vivo, both under control or inflammatory (tumor necrosis factor α [TNF-α] at 50 ng/μL) conditions.
Results: Neuroinflammation promoted a significant decrease in T1 relaxation times after multiple injections of both GBCAs as shown by quantitative T1 mapping of EAE brains compared with HC. This corresponded to higher Gd retention within the EAE brains at 1, 10, and 40 days pfi as determined by laser ablation-ICP-MS. In inflamed cerebellum, in particular in the deep cerebellar nuclei (CN), elevated Gd retention was observed until day 40 after last gadopentetate application (CN: EAE vs HC, 55.06 ± 0.16 μM vs 30.44 ± 4.43 μM). In contrast, gadobutrol application led to a rather diffuse Gd content in the inflamed brains, which strongly diminished until day 40 (CN: EAE vs HC, 0.38 ± 0.08 μM vs 0.17 ± 0.03 μM). The analysis of cytotoxic effects of both GBCAs using living brain tissue revealed an elevated cell death rate after incubation with gadopentetate but not gadobutrol at 50 mM. The cytotoxic effect due to gadopentetate increased in the presence of the inflammatory mediator TNF-α (with vs without TNF-α, 3.15% ± 1.18% vs 2.17% ± 1.14%; P = 0.0345).
Conclusions: In the EAE model, neuroinflammation promoted increased Gd retention in the brain for both GBCAs. Whereas in the inflamed brains, efficient clearance of macrocyclic gadobutrol during the investigated time period was observed, the Gd retention after application of linear gadopentetate persisted over the entire observational period. Gadopentetate but not gadubutrol appeared to be neurotoxic in an ex vivo paradigm of neuronal inflammation.
Several attempts have been made in the past to develop a European harmonized testing and assessment method for façades before the European commission decided to publish a call for tender on the topic. A project consortium from five countries (Sweden, UK, France, Germany and Hungary) applied to the call for tender and was contracted to develop a European approach to assess the fire performance of façades. 24 sub-contractors and 14 stakeholder entities were part of the project. The objective of the European project was to address a request from the Standing Committee of Construction (SCC) to provide EC Member States regulators with a means to regulate the fire performance of façade systems based on a European Approach agreed by SCC. The initial stages of this Project were focused on establishing a Register of the regulatory requirements in all Member States in relation to the fire Performance of façade systems, and to identify those Member States who have regulatory requirements for the fire performance façade systems which go beyond the current EN 13501 (reaction to fire and fire resistance) classification systems and to collate the details of these additional requirements. After having confirmed the regulatory needs a testing and classification methodology based on BS 8414 and DIN 4102-20 was developed to address the identified key performance and classification characteristics.
This paper is a short overview of results the two-year development work, which Final Report published by the European Commission in 2018.
Ergopeptides, like ergocornine and a-ergocryptine, exist in an S- and in an R-configuration. Kinetic experiments imply that certain configurations are preferred depending on the solvent. The experimental methods are explained in this article. Furthermore, computational methods are used to understand this configurational preference. Standard quantum chemical methods can predict the favored configurations by using minimum energy calculations on the potential energy landscape. However, the explicit role of the solvent is not revealed by this type of methods. In order to better understand its influence, classical mechanical molecular simulations are applied. It appears from our research that 'folding' the ergopeptide molecules into an intermediate state (between the S- and the R-configuration) is mechanically hindered for the preferred configurations.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
Dietary supplements high in isolated isoflavones are commercially available for human consumption primarily to alleviate menopausal symptoms in women. The isoflavone composition, quantity and importantly their estrogenic potency are poorly standardised and can vary considerably between different products. The aim of this study was to analyse the isoflavone composition of 11 dietary supplements based on soy or red clover using the HPLC/MS/MS technique. Furthermore, we investigated the transactivational potential of the supplements on the estrogen receptors (ER), ERα and ERβ, performing luciferase reporter gene assays. As expected, we found that the isoflavone composition varies between different products. The measured total isoflavone contents in various supplements were mostly comparable to those claimed by the manufacturers in their product information. However expressing the isoflavone content as isoflavone aglycone equivalents, soy-based supplements had a clearly lower quantity compared to the manufacturer information. All supplements transactivated more or less ERα and ERβ with a preference for ERβ. The transactivational efficiency exceeded partly the maximal 17β-estradiol induced ER activation. While the different soy-based supplements revealed similar transactivation potential to both ERs, red clover-based supplements differed considerably. We conclude that different commercial dietary supplements based on soy or red clover vary in their isoflavone composition and quantity. They are estrogenically active, although especially the red clover-based supplements show considerable differences in their estrogenic potential to ERα and ERβ. Thus, different isoflavone-rich products cannot be necessarily compared regarding possible biological effects.
Lanthanide-based, spectrally shifting, and multi-color luminescent upconverting nanoparticles (UCNPs) have received much attention in the last decades because of their applicability as reporter for bioimaging, super-resolution microscopy, and sensing as well as barcoding and anti-counterfeiting tags. A prerequisite for the broad application of UCNPs in areas such as sensing and encoding are simple, robust, and easily upscalable synthesis protocols that yield large quantities of UCNPs with sizes of 20 nm or more with precisely controlled and tunable physicochemical properties from lowcost reagents with a high reproducibility. In this context, we studied the reproducibility, robustness, and upscalability of the synthesis of β-NaYF4:Yb, Er UCNPs via thermal decomposition. Reaction parameters included solvent, precursor chemical compositions, ratio, and concentration. The resulting UCNPs were then examined regarding their application-relevant physicochemical properties such as size, size distribution, morphology, crystal phase, chemical composition, and photoluminescence.
Based on these screening studies, we propose a small volume and high-concentration synthesis approach that can provide UCNPs with different, yet controlled size, an excellent phase purity and tunable morphology in batch sizes of up to at least 5 g which are well suited for the fabrication of sensors, printable barcodes or authentication and recycling tags.
We present the synthesis and characterization of a family of regioisomerically pure pH-sensitive rosamine fluorophores consisting of xanthene fluorophore cores, which determine the dyes’ photophysical properties such as excitation/emission wavelength, fluorescence quantum yield, and fluorescence lifetime, and differently substituted phenol moieties. The hydroxyl substituent of the phenol moiety introduces a pH sensitivity of the dyes’ fluorescence exploiting a photoinduced electron transfer (PET), that leads to a protonation-induced switching ON of the rosamine emission. Rational tuning of the pKa value of the rosamine fluorescence between 4 to 9 is achieved by altering the substitution pattern and degree of bromination of the phenolic subunits. Additionally, a temperature sensitivity of the fluorescence quantum yield is introduced or suppressed based upon the degree of rigidity of the xanthene scaffold.
Simulation-based digital twins have emerged as a powerful tool for evaluating the mechanical response of bridges. As virtual representations of physical systems, digital twins can provide a wealth of information that complements traditional inspection and monitoring data. By incorporating virtual sensors and predictive maintenance strategies, they have the potential to improve our understanding of the behavior and performance of bridges over time. However, as bridges age and undergo regular loading and extreme events, their tructural characteristics change, often differing from the predictions of their initial design. Digital twins must be continuously adapted to reflect these changes. In this article, we present a Bayesian framework for updating simulation-based digital twins in the context of bridges. Our approach integrates information from measurements to account for inaccuracies in the simulation model and quantify uncertainties. Through its implementation and assessment, this work demonstrates the potential for digital twins to provide a reliable and up-to-date representation of bridge behavior, helping to inform decision-making for maintenance and management.
Research software has become a central asset in academic research. It optimizes existing and enables new research methods, implements and embeds research knowledge, and constitutes an essential research product in itself. Research software must be sustainable in order to understand, replicate, reproduce, and build upon existing research or conduct new research effectively. In other words, software must be available, discoverable, usable, and adaptable to new needs, both now and in the future. Research software therefore requires an environment that supports sustainability.
Hence, a change is needed in the way research software development and maintenance are currently motivated, incentivized, funded, structurally and infrastructurally supported, and legally treated. Failing to do so will threaten the quality and validity of research. In this paper, we identify challenges for research software sustainability in Germany and beyond, in terms of motivation, selection, research software engineering personnel, funding, infrastructure, and legal aspects. Besides researchers, we specifically address political and academic decision-makers to increase awareness of the importance and needs of sustainable research software practices. In particular, we recommend strategies and measures to create an environment for sustainable research software, with the ultimate goal to ensure that software-driven research is valid, reproducible and sustainable, and that software is recognized as a first class citizen in research. This paper is the outcome of two workshops run in Germany in 2019, at deRSE19 - the first International Conference of Research Software Engineers in Germany - and a dedicated DFG-supported follow-up workshop in Berlin.
Supramolecular copolymerization driven by integrative self-sorting of hydrogen-bonded rosettes
(2020)
Molecular recognition to preorganize noncovalently polymerizable supramolecular complexes is a characteristic process of natural supramolecular polymers, and such recognition processes allow for dynamic self-alteration, yielding complex polymer systems with extraordinarily high efficiency in their targeted function. We herein show an example of such molecular recognition-controlled kinetic assembly/disassembly processes within artificial supramolecular polymer systems using six-membered hydrogen-bonded supramolecular complexes (rosettes). Electron-rich and poor monomers are prepared that kinetically coassemble through a temperature-controlled protocol into amorphous coaggregates comprising a diverse mixture of rosettes. Over days, the electrostatic interaction between two monomers induces an integrative self-sorting of rosettes. While the electron-rich monomer inherently forms toroidal homopolymers, the additional electrostatic interaction that can also guide rosette association allows helicoidal growth of supramolecular copolymers that are comprised of an alternating array of two monomers. Upon heating, the helicoidal copolymers undergo a catastrophic transition into amorphous coaggregates via entropy-driven randomization of the monomers in the rosette.
Integrated multi-omics analyses of microbiomes have become increasingly common in recent years as the emerging omics technologies provide an unprecedented opportunity to better understand the structural and functional properties of microbial communities. Consequently, there is a growing need for and interest in the concepts, approaches, considerations, and available tools for investigating diverse environmental and host-associated microbial communities in an integrative manner. In this review, we first provide a general overview of each omics analysis type, including a brief history, typical workflow, primary applications, strengths, and limitations. Then, we inform on both experimental design and bioinformatics analysis considerations in integrated multi-omics analyses, elaborate on the current approaches and commonly used tools, and highlight the current challenges. Finally, we discuss the expected key advances, emerging trends, potential implications on various fields from human health to biotechnology, and future directions.
Iron-based catalysts are employed in CO2-FTS due to their ability to convert CO2 into CO in a first step and their selectivity towards higher hydrocarbons in a second CO hydrogenation step. According to the literature, iron carbides represent the active phase for hydrocarbon formation and are claimed to emerge in the presence of CO. We propose nanostructured FeOx films as model systems to assess information about the complex phase transformations during CO2-FTS. Mesoporous hematite, ferrihydrite, maghemite, maghemite/magnetite films were exposed to CO2-FTS atmospheres at 20 bar and 300°C. Up to three distinct phases were observed depending on the timeon-stream (TOS): a sintered maghemite/magnetite phase, a carbidic core-shell structure, and a low-crystalline, needle-type oxide phase. Our findings indicate that the formation of an intermediary maghemite/magnetite phase, predominant after short TOS (30 h), precedes the evolution of the carbide phase.
Yet, even after prolonged TOS (185 h), no full conversion into a bulk carbide is observed.
This study focuses on the corrosion mechanism of carbon steel exposed to an artificial geothermal brine influenced by carbon dioxide (CO2) gas. The tested brine simulates a geothermal source in Sibayak, Indonesia, containing 1500 mg/L of Cl-, 20 mg/L of SO4 2-, and 15 mg/L of HCO3-with pH 4. To reveal the temperature effect on the corrosion behavior of carbon steel, exposure and electrochemical tests were carried out at 70 °C and 150 °C. Surface analysis of corroded specimens showed localized corrosion at both temperatures, despite the formation of corrosion products on the surface. After 7 days at 150 °C, SEM images showed the formation of an adherent, dense, and crystalline FeCO3 layer. Whereas at 70 °C, the corrosion products consisted of chukanovite (Fe2(OH)2CO3) and siderite (FeCO3), which are less dense and less protective than that at 150 °C.
Control experiments under Ar-environment were used to investigate the corrosive effect of CO2. Free corrosion potential (Ecorr) and electrochemical impedance spectroscopy (EIS) confirm that at both temperatures, the corrosive effect of CO2 was more significant compared to that measured in the Ar-containing solution. In terms of temperature effect, carbon steel remained active at 70 °C, while at 150 °C, it became passive due to the FeCO3 formation. These results suggest that carbon steel is more susceptible to corrosion at the near ground surface of a geothermal well, whereas at a deeper well with a higher temperature, there is a possible risk of scaling (FeCO3 layer). A longer exposure test at 150 °C with a stagnant solution for 28 days, however, showed the unstable FeCO3 layer and therefore a deeper localized corrosion compared to that of seven-day exposed specimens.
Al2O3 has been widely used as a coating in industrial applications due to its excellent chemical and thermal resistance. Considering high temperatures and aggressive mediums exist in geothermal systems, Al2O3 can be a potential coating candidate to protect steels in geothermal applications. In this study, γ-Al2O3 was used as a coating on martensitic steels by applying AlOOH sol followed by a heat treatment at 600 °C. To evaluate the coating application process, one-, two-, and three-layer coatings were tested in the artificial North German Basin (NGB), containing 166 g/L Cl−, at 150 °C and 1 MPa for 168 h. To reveal the stability of the Al2O3 coating in NGB solution, three-layer coatings were used in exposure tests for 24, 168, 672, and 1296 h, followed by surface and cross-section characterization. SEM images show that the Al2O3 coating was stable up to 1296 h of exposure, where the outer layer mostly transformed into boehmite AlOOH with needle-like crystals dominating the surface. Closer analysis of cross-sections showed that the interface between each layer was affected in long-term exposure tests, which caused local delamination after 168 h of exposure. In separate experiments, electrochemical impedance spectroscopy (EIS) was performed at 150 °C to evaluate the changes of coatings within the first 24 h. Results showed that the most significant decrease in the impedance is within 6 h, which can be associated with the electrolyte penetration through the coating, followed by the formation of AlOOH. Here, results of both short-term EIS measurements (up to 24 h) and long-term exposure tests (up to 1296 h) are discussed.
Abstract Investigations on metal halide systems carried out by Knudsen effusion mass spectrometry in the period 1990-2014 are reviewed in the present paper.163 original papers were published focused on metal halides showing still considerable activity in this area. The fundamentals of the Knudsen effusion mass spectrometry method and thermodynamic background of the investigation are briefly reported. Data to the system studied, temperature ranges, Knudsen cell materials, vapor species identified in the equilibrium vapors and the thermodynamic properties obtained in the study are presented. The important issues of metal halide vaporization studies are briefly discussed and commented. The studies of the vaporization of metal halogens by Knudsen effusion mass spectrometry aimed firstly atthe determination of gaseous complexes species in the vapor and determination of its thermodynamic data like sublimation enthalpy etc. and secondly at the determination of negative ions formation and various ion-molecule equilibria reactions of metal halide systems. Many of the studied materials have a crucial role for modern technologies, for example metal halide lamps, hot corrosion caused by halide salts, phosphorus recovery technologies or gas assisted separation of lanthanides. The investigation of such systems gives information on mechanisms of vaporization, volatility of the systems under various conditions (temperature, pressure etc.), reactivity, thermal stability, resistance etc. that could be further applied for various calculations and to predict the behavior of various components under various technological aspects.
A recent approach to measure electron radiation doses in the kGy range is the use of phosphors with an irradiation dose-dependent luminescence decay time. However, the applicability of the previously investigated material NaYF4:Yb3+,Er3+ is limited as it shows pronounced fading. Therefore, in this work, a modified SrF2 synthesis is presented that results in SrF2 nanoparticles codoped with Yb and either Er, Hm, or Tm. To assess their suitability as dosimeter material, dose response, as well as its degree of fading over 50 up to 140 days after irradiation were measured. Fading rates as small as 5% in SrF2:Er,Yb and 4% in SrF2:Ho,Yb were derived, which are comparable to established dosimeter materials. A combination of spectroscopy, diffraction and DFT calculations was used to elucidate the effect of irradiation, pointing towards the formation of a secondary phase of Yb2+ that we predict could be Yb2OF2. This irreversible formation of a secondary phase is considered to be the explanation for the low fading behavior in SrF2-based phosphors compared to NaYF4:Yb, Er, a highly attractive feature for electron beam dosimetry.
Recent studies have confirmed the widening of the weld pool interface, known as a bulge effect, during deep penetration high power laser beam welding. The link between such geometric particularities of the weld pool shape and the hot cracking phenomena is significant. The present work seeks to extend the level of understanding by investigating their relationship. A coupled multiphysics, multiscale numerical framework is developed, comprising a series of subsequent analyses. The study examines the influences of the bulge on the three most dominant effects causing hot cracking, namely the thermal cycles, the mechanical loading, and the local microstructure. The bulge in the weld pool shape forms approximately in the middle of the plate, thus correlating with the location of hot cracking. It increases the hot cracking susceptibility by enhancing the three dominant effects. The numerical results are backed up by experimental data.
The geometry of the melt pool in laser beam welding plays a major role to understand the dynamics of the melt and its solidification behavior. In this study, a butt configuration of 15 mm thick structural steel and transparent quartz glass was used to observe the weld pool geometry by means of high-speed camera and an infrared camera recording. The observations show that the dimensions of the weld pool vary depending on the depth. The areas close to the weld pool surface take a teardrop-shape. A bulge-region and its temporal evolution were observed approximately in the middle of the depth of the weld pool. Additionally, a 3D transient thermal-fluid numerical simulation was performed to obtain the weld pool shape and to understand the formation mechanism of the observed bulging effect. The model takes into account the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature. The numerical results showed good accordance and were furthermore used to improve the understanding of the experimentally observed bulging effect.
A technique for calculating the main solidification parameters for a two-dimensional columnar crystal growth during complete penetration laser beam welding of thin steel sheets was developed. Given that the weld pool interface is described by Lamé curves (superellipses) within the horizontal plane of growth, general analytical solutions were derived for the geometry of the crystal axis and the corresponding growth rate and cross-sectional area of the crystal. A dimensionless analysis was performed to provide insights on the dependence of the solidification parameters on the shape and dimensions of the rear part of the weld pool boundary. The derived solutions were applied for the case of complete penetration laser beam keyhole welding of 2 mm thick 316L austenitic chromium-nickel steel sheets. It was shown that the reconstruction of the weld pool boundary with Lamé curves provides higher accuracy and flexibility compared to results obtained with elliptical functions. The validity of the proposed technique and the derived analytical solutions was backed up by a comparison of the obtained solutions to known analytical solutions and experimentally determined shapes and sizes of the crystals on the top surface of the sheet. The dimensions of the calculated crystal axis correlated well with the experimentally obtained results.
Study on the transition behavior of the bulging effect during deep penetration laser beam welding
(2022)
The present work is devoted to the study of the transition behavior of the recently confirmed widening of the weld pool, known as the bulging effect, during high-power deep penetration laser beam welding of thick unalloyed steel sheets. A three-dimensional transient multi-physics numerical model is developed, allowing for the prediction of the bulge formation and the study of its temporal behavior. The model is generalized to account automatically for the transition from partial to complete penetration. Several experimental measurements and observations, such as drilling period, weld pool length, temperature, efficiency, and metallographic cross-sections are used to verify the model and assure the plausibility of the numerical results. The analysis of the calculated temperature and velocity distributions, as well as the evolution of the keyhole geometry, shows that the formation of a bulging region strongly depends on the penetration depth of the weld. Based on the numerical results, the bulge is found to occur transiently, having its transition from a slight bulge to a fully developed bulging between penetration depths of 6 mm and 9 mm, respectively.
The present work is devoted to the numerical analysis of the high-power laser beam welding of thick sheets at different welding speeds. A three-dimensional transient multi-physics numerical model is developed, allowing for the prediction of the keyhole geometry and the final penetration depth. Two ray tracing algorithms are implemented and compared, namely a standard ray tracing approach and an approach using a virtual mesh refinement for a more accurate calculation of the reflection points. Both algorithms are found to provide sufficient accuracy for the prediction of the keyhole depth during laser beam welding with process speeds of up to 1.5 m/min. However, with the standard algorithm, the penetration depth is underestimated by the model for a process speed of 2.5 m/min due to a trapping effect of the laser energy in the top region. In contrast, the virtually refined ray tracing approach results in high accuracy results for process speeds of both 1.5 m/min and 2.5 m/min. A detailed study on the trapping effect is provided, accompanied by a benchmark including a predefined keyhole geometry with typical characteristics for the high-power laser beam welding of thick plates at high process speed, such as deep keyhole, inclined front keyhole wall, and a hump.
The present work deals with the recently confirmed widening of the weld pool interface, known as a bulging effect, and its relevance in high power laser beam welding. A combined experimental and numerical approach is utilized to study the influence of the bulge on the hot cracking formation and the transport of alloying elements in the molten pool. A technique using a quartz glass, a direct-diode laser illumination, a high-speed camera, and an infrared camera is applied to visualize the weld pool geometry in the longitudinal section. The study examines the relevance of the bulging effect on both, partial and complete penetration, as well as for different sheet thicknesses ranging from 8 mm to 25 mm. The numerical analysis shows that the formation of a bulge region is highly dependent on the penetration depth and occurs more frequently during partial penetration above 6 mm and complete penetration above 8 mm penetration depth, respectively. The location of the bulge correlates strongly with the cracking location. The obtained experimental and numerical results reveal that the bulging effect increases the hot cracking susceptibility and limits the transfer of alloying elements from the top of the weld pool to the weld root.
The contour scan strategies in laser powder bed fusion (LPBF) of Ti-6Al-4V were studied at the coupon level. These scan strategies determined the surface qualities and subsurface residual stresses. The correlations to these properties were identified for an optimization of the LPBF processing. The surface roughness and the residual stresses in build direction were linked: combining high laser power and high scan velocities with at least two contour lines substantially reduced the surface roughness, expressed by the arithmetic mean height, from values as high as 30 μm to 13 μm, while the residual stresses rose from ~340 to about 800 MPa. At this stress level, manufactured rocket fuel injector components evidenced macroscopic cracking. A scan strategy completing the contour region at 100 W and 1050 mm/s is recommended as a compromise between residual stresses (625 MPa) and surface quality (14.2 μm). The LPBF builds were monitored with an in-line twin-photodiode-based melt pool monitoring (MPM) system, which revealed a correlation between the intensity quotient I2/I1, the surface roughness, and the residual stresses. Thus, this MPM system can provide a predictive estimate of the surface quality of the samples and resulting residual stresses in the material generated during LPBF.
An UCST-type copolymer of acrylamide (AAm) and acrylonitrile (AN) (poly(AAm-co-AN)) was prepared by reversible addition fragmentation chain transfer (RAFT) polymerization and its temperature-induced phase transition and aggregation behaviour studied by turbidimetry, static and dynamic light scattering, small angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM) measurements. The phase transition temperature was found to increase with increasing AN content in the copolymer, concentration of the solutions and copolymer chain length. A significant effect was observed onto the phase transition temperature by addition of different electrolytes into the copolymer solution. The copolymer chains were aggregated below the phase transition temperature and disaggregated above it. The size of the aggregates increases with increasing AN contents and concentration of the copolymer solutions below the phase transition temperature. The copolymer chains were expanded and weekly associated in solution above the phase transition temperature. A model is proposed to explain such association–aggregation behaviour of poly(AAm-co-AN) copolymers depending on AN contents and concentration of the copolymer solutions as a function of temperature.
Clean technologies play a crucial role in reducing greenhouse gas emissions and protecting the climate. Hydrogen is a promising energy carrier and fuel that can be used in many applications. We explore the global hydrogen technological innovation system (TIS) by analyzing the three knowledge and technology transfer channels of publications, patents, and standards. Since the adoption of hydrogen technologies requires trust in their safety,this study specifically also focuses on hydrogen safety. Our results show that general and hydrogen safety research has increased significantly while patenting experienced stagnation. An analysis of the non-patent literature in safety patents shows little recognition of scientific publications. Similarly, publications are underrepresented in the analyzed 75 international hydrogen and fuel cell standards. This limited transfer of knowledge from published research to standards points to the necessity for greater involvement of researchers in standardization. We further derive implications for the hydrogen TIS and recommendations for a better and more impactful alignment of the three transfer channels.
Climate change and the pressure to decarbonize, as well as energy security concerns, have drawn the attention of policymakers and the industry to hydrogen energy. To ad-vance the hydrogen economy at a global scale, research and innovation progress is of significant importance, among others. However, previous studies have provided only lim-ited quantitative evidence of the effects of research and innovation on the formation of a global hydrogen market. Instead, they postulate rather than empirically support this rela-tionship. Therefore, this study analyzes the effects of research and innovation measured by scientific publications, patents, and standards on bilateral hydrogen trade flows for 32 countries between 1995 and 2019 in a gravity model of trade, using regression analyses and Poisson Pseudo Maximum Likelihood (PPML) estimation. The main results of the PPML estimation show that research and innovation progress is indeed associated with increased trade, especially with patenting and (international) standardization enhancing hydrogen export volumes. As policy implications, we derive that increased public R&D funding can help increase the competitiveness of hydrogen energy and boost market growth, along with infrastructure support and harmonized standards and regulations.
The global trend towards decarbonization and the demand for energy security have put hydrogen energy into the spotlight of industry, politics, and societies. Numerous governments worldwide are adopting policies and strategies to facilitate the transition towards hydrogen-based economies. To assess the determinants of such transition, this study presents a comparative analysis of the technological innovation systems (TISs) for hydrogen technologies in Germany and South Korea, both recognized as global frontrunners in advancing and implementing hydrogen-based solutions. By providing a multidimensional assessment of pathways to the hydrogen economy, our analysis introduces two novel and crucial elements to the TIS analysis: (i) We integrate the concept of ‘quality infrastructure’ given the relevance of safety and quality assurance for technology adoption and social acceptance, and (ii) we emphasize the social perspective within the hydrogen TIS. To this end, we conducted 24 semi-structured expert interviews, applying qualitative open coding to analyze the data. Our results indicate that the hydrogen TISs in both countries have undergone significant developments across various dimensions. However, several barriers still hinder the further realization of a hydrogen economy. Based on our findings, we propose policy implications that can facilitate informed policy decisions for a successful hydrogen transition.
Irregularities of the track are a main cause of train-induced ground vibration, and track maintenance is of great importance. Although geometric irregularities at the wheel-rail contact are widely used, other types of irregularities, such as stiffness irregularities, irregularities from different track positions and irregularities in the wave propagation, were analysed in the present study. The track behaviour was investigated by a multi-beam-on-soil model. This track model is coupled with a vehicle model to calculate the vehicle–track interaction. The track model was also used for the track filtering, which transfers a track support error to the equivalent rail irregularity or, conversely, the sharp axle pulse on the rail to a smoother pulse on the soil. In the case in which this filtering varies randomly along the track, the pulses of the moving static load induce a certain ground Vibration component (“the scatter of axle pulses”). This effect was calculated by the superposition of axle pulses in the frequency domain and by a stochastic simulation. Simultaneous vehicle, track and soil measurements at a certain site were used to evaluate the different excitation and ground Vibration components. The agreement between calculations and axle-box and soil measurements is good. The ground vibrations calculated from rail irregularities and corresponding dynamic loads, however, clearly underestimate the measured ground vibration amplitudes. Only the static load that is moving over a varying track support stiffness can produce the important mid-frequency ground Vibration component by the scatter of axle pulses.
A simple and fast prediction scheme is presented for train induced ground and building vibrations. Simple models such as (1-dimensional) transfer matrices are used for the vehicle-track-soil interaction and for the building-soil interaction. The wave propagation through layered soils is approximated by a frequency-dependent homogeneous half-space. The prediction is divided into the parts “emission” (excitation by railway traffic), “transmission” (wave propagation through the soil) and “immission” (transfer into a building). The link between the modules is made by the excitation force between emission and transmission, and by the free-field vibration between transmission and immission. All formula for the simple vehicle-track, soil and building models are given in this article. The behaviour of the models is demonstrated by typical examples, that is the mitigation of train vibrations by elastic track elements, the low- and high-frequency cut-offs characteristic for layered soils, and the interacting soil, wall and floor resonances of multi-storey buildings. It is shown that the results of the simple prediction models can well represent the behaviour of the more time-consuming detailed models, the finite-element boundary-element models of the track, the wavenumber integrals for the soil, and the three-dimensional finite-element models of the building. In addition, measurement examples are given for each part of the prediction confirming that the methods provide reasonable results. As the prediction models are fast in calculation, many predictions can be done, for example to assess the environmental effect along a new railway line. The simple models have the additional advantage that the user needs to know only a minimum of parameters. So, the prediction is fast and user-friendly, but also theoretically and experimentally well-founded.
Three measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results.
The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
This contribution presents some principles and some examples of the mitigation of railway-induced ground vibrations. The principles are different for the mitigation measures at the track, in the soil or at the building. Force transfer functions of isolated and un-isolated track-soil systems, reflected and transmitted wave amplitudes at walls and trenches in the soil, and the transfer of the (free-field) vibration amplitudes to the foundation amplitudes of the building are analysed. The mitigation effect can be calculated by exact or simplified formulas. Some examples with 3D (finite-element boundary-element), 2D (beam-on-support), and 1D track models, 2D and 1D soil models, detailed 3D building models and finite or infinite 1D wall-floor models are investigated to find out if simple models can be used for a satisfactory prediction of the mitigation effect. The 1D track examples show that the force transfer of the track without vehicle can be exactly calculated, whereas the total force transfer can be calculated approximately if appropriate wheelset masses per track length are used for the isolated and the un-isolated track. The mitigation effect of a filled trench is calculated by a 2D finite element model and the results compare with simple transmission formula if the stiffness per area rather than the wave impedances are used for the infill material. The base isolation of a building is analysed by a detailed 3D model and the results are similar to the analytic results of a single wall with floors on the soil. Other reduction measures as different floor and column dimensions are usually less effective so that the clearly best mitigation solution at a building is a partly or a complete base isolation.
A complex measuring campaign has been performed including the simultaneous measurement of vehicle, track, and soil vibrations during train runs at 16, 25, 40, 63, 80, 100, 125, 140, 160 km/h, and impulse measurements of the passenger car, three track sections and the soil. A ballast track on the soil surface and on a concrete bridge have been investigated as well as a slab track in a tunnel. The evaluation and comparison of all these data shows a generally good agreement for all components if the strong low- and high-frequency cut-off characteristics of the layered and damped soil are incorporated. There is a strong causal correlation between the vehicle and the soil by the dynamic excitation forces and a weak relation between the track and the soil by the axle-sequence spectrum of the train. However, the similarity between the axle-impulse spectrum observed at the track and the spectra of the ground vibration lead to the special excitation component of “scattered axle impulses” which is pre-dominant at the far-field points of the soil.
The reduction in train-induced ground vibrations by different railway lines and by mitigation measures in the propagation path was analysed in a unified approach by two-dimensional finite element calculations. In general, there was no reduction at low frequencies, and the reduction be-came stronger with increasing frequencies. A maximum reduction of 0.1 at high frequencies was established with an open trench. Reductions between 0.7 and 0.2 have been found for the other sit-uations, filled trenches, walls, plates, and blocks, as well as for railway lines on dams, in cuts and in a tunnel. Bridges can produce amplifications due to their resonance frequencies, but also strong reductions due to massive bridge piers. The influence of some parameters has been analysed, such as the bridge span, the inclination of the dam and the cut, the stiffness of the soil, and the tunnel structure. The dynamic track stiffnesses of a surface, bridge, and tunnel track have been calculated using the 3D finite-element boundary-element method for comparison with corresponding meas-urements.
Ground vibrations near railway lines are generated by the forces that are acting between wheel and rail. It seems to be a straight forward assumption that the vehicle dynamics are important for the level and the frequencies of the excitation forces. Different vehicle dynamics phenomena are analysed for their role in the excitation of ground vibrations: rigid body modes of the bogies, elastic (bending) modes of the car body, and elastic modes of the wheelset. The theoretical analyses use rigid body models, simplified elastic models, and detailed elastic models. Some of these problems are vehicle–track interaction problems where 3D finite‑element boundary‑element models have been used for the track and soil. It is shown that the rigid or flexible vehicle modes are well in the frequency range of ground vibrations (4 to 100 Hz). They have an influence on the excitation force but the additional forces are rather small and can be neglected in ground vibration prediction. The theoretical results are checked by experimental results of a simultaneous measurement of vehicle,
track, and ground vibrations.
The vehicle–track interaction generates forces and consequently vibrations in the environment. The interaction has been analysed by the simultaneous measurements of vehicle, track and ground vibrations during test runs with varied train speeds. The special effects of the passage over a bridge and through a tunnel are studied and compared with the measurements on a conventional ballasted surface line. The maximum amplitudes, narrow band and one-third octave band spectra are presented for the axle-box accelerations and for the track, bridge and ground vibrations. The different frequencies and frequency bands are related to wheel out-of-roundness, track alignment errors, the sleeper passage and the wheelset–track resonance. An axle impulse component has been observed at the track, at the near-field soil and as a scattered version in the far field. Specific results can be found for the bridge track, where clearly speed-dependent bridge resonances occur due to the axle sequence of the train, and for the tunnel track where soft rail pads are responsible for a strong amplification around the wheelset–track resonance. On the other hand, the axle impulses are strongly reduced by the tunnel track, and the scattered axle impulse component is not as relevant as for the surface track. As a consequence, a strong mid-frequency amplitude reduction of the tunnel compared to the surface line has been measured for low and high train speeds by the Federal Institute of Material Research and Testing (BAM) and by other institutes.
The propagation of ground vibrations is theoretically analysed with frequency-wavenumber and simplified methods. Experimental methods are presented which can characterise the site-specific ground vibrations by wave velocities, stiffness and damping. Measurements with hammer and train excitation have been performed at several sites. The one-third octave spectra show the stiffness-dependent amplitudes and the low- and high-frequency filter effects due to the layering and the damping of the soil. Specific train effects, an additional high-frequency filter, the sleeper passage frequency, and an amplified mid-frequency component can be clearly found. The attenuation with distance is analysed in detail where the theoretical exponential and the empirical frequency-dependent power law are considered. Hammer and train excitation show the same site-specific effects which are mainly due to the stronger or weaker damping of the soil. The train attenuation is generally weaker than the hammer attenuation. The attenuation exponent of the power law, which is strongly dependent on the site and the frequency, is reduced for the train vibration by 0.3 to 0.5 in agreement with the theory. Reasons are discussed for the overall power law and for the dominating mid-frequency component.
Measurements on the vehicle-track interaction and the excitation of railway-induced ground vibration
(2017)
Two railway measurement campaigns have been performed in Germany and Switzerland which yield insight in the vehicle-track-soil interaction. The campaign in Germany has included simultaneous measurement of vehicle, track, and soil vibrations during train runs with 16, 25, 40, 63, 80, 100, 125, 140, 160 km/h, and impulse measurements of the passenger car, three track sections and the soil. Two ballast tracks, one on the soil surface and one on a concrete bridge, have been investigated as well as a slab track in a tunnel. Ten different sites in Switzerland have been measured for soil properties and train-induced ground vibrations, which allow to determine the excitation forces of the railway traffic. New axle-box measurements at some of the Swiss sites have been analysed to get further experimental evidence. All these measurements have been evaluated to characterize the excitation processes. Relations between vehicle vibration and ground vibration can be observed. The vehicle vibrations, namely the accelerations of the wheelsets, yield the dynamic forces due to the passage over the irregularities of the vehicle and the track. The ground vibrations are correlated to these dynamic forces to a certain extent. Some mid-frequency ground vibration amplitudes, however, are higher than expected from the dynamic excitation forces. The experimental observations can be explained by an irregular response to the passage of the static loads, that means the passage of the static loads over an irregular ballast or soil. This correct understanding of the excitation processes is important for the prediction as well as for the mitigation of railway induced ground vibrations.
The train passages over intact or damaged slab tracks on different soils have been calculated by two methods. The finite element method (FEM) uses a Winkler soil under the track model by adding a thin “soil layer”. The combined finite element boundary element method has a continuous soil model which is included by the boundary element method. The basic results are the distributions of the track (rail, track plate, and base layer) displacements along the track for a single axle laod. These solutions are superposed to a complete train load and transformed to time histories. The influence of track and soil parameters has been analysed. The main interest is the influence of the track damage. A gap between track plate and base layer of different lengths has been studied for changes in amplitudes and widths of deflection. A best fit to measured track displacements has been found so that the track damage can be identified and quantified. The FEM model with Winkler soil cannot be fitted to the amplitude and width with the same soil parameters. Therefore, the FEBEM model is preferable for these railway track problems.
The interest in repair technologies for polymer composites has increased significantly over the last decades, due to the growing use of these materials in structural applications. In this study, poly (ethylene-co-methacrylic acid) (EMAA) was used as self-healing agent to glass fiber/epoxy composite. Materials with EMAA contents of 2 wt% and 5 wt% were manufactured using Resin Transfer Molding (RTM) and the effects of the healing agent on the properties were investigated using tensile tests and Dynamic Mechanical Analysis (DMA). Results show slight variation of properties, which was more pronounced as the content of EMAA increased. In addition, the healing efficiency was investigated through fatigue tests and the addition of higher content of EMAA increased the number of cycles to failure after the healing activation cycle.
Currently established and projected regulatory frameworks require the classification of materials (whether nano or non-nano) as specified by respective definitions, most of which are based on the size of the constituent particles. This brings up the question if currently available techniques for particle size determination are capable of reliably classifying materials that potentially fall under these definitions.
In this study, a wide variety of characterisation techniques, including counting, fractionating, and spectroscopic techniques, has been applied to the same set of materials under harmonised conditions.
The selected materials comprised well-defined Quality control materials (spherical, monodisperse) as well as industrial materials of complex shapes and considerable polydispersity. As a result, each technique could be evaluated with respect to the determination of the number-weighted median size. Recommendations on the most appropriate and efficient use of techniques for different types of material are given.
Novel agar-based test electrolytes are used to perform electrochemical corrosion investigations on ZnFe and ZnNi binary as well as ZnFeMo ternary zinc coatings. The objectives of the electrochemical investigations include the characterization of the corrosion behavior, the description of the protective effect of the coatings as well as the investigation of the layer formation and degradation under artificial aging. ZnFe and ZnFeMo coatings are applied with varying iron content as well as an additional passivation layer, respectively, to study the effect on corrosion resistance. The results show that the protective effect of the coatings is not negatively influenced by different iron contents or the addition of molybdenum. Additional passivation of the ZnFe-containing coatings by means of a passivating agent leads to a significant improvement in the protective effect. Artificial aging leads to slight degradation of the additional passivation layer whereas coatings without post-treatment enhance their protective effect by the formation of corrosion product layers.
Limitations are encountered regarding the electrolyte when studying atmospheric corrosion reactions on materials that form protective layers on their surface or tend to passivate. For example, the reconstruction of a thin wet film, as well as the interpretation of electrochemical measurements in so-called bulk solutions (a "mass" of electrolyte), often proves to be difficult in view of corrosion behavior under atmospheric conditions. A new approach to this problem in corrosion research includes the use of gel-type electrolytes as an alternative to bulk electrolytes. Gel-type electrolytes form a thin wet film on the surface of the material, whereby the naturally formed protective layer is affected similar to atmospheric conditions and can be examined in an almost non-destructive way. Through electrochemical instrumentation specific values such as polarization resistances and corrosion currents can be determined providing information on kinetics of surface layer formation and stability of surface layers formed under the influence of a thin wet film. Thus, new test methods can be developed that supply a better understanding of corrosion processes in specific atmospheres.
In this article different zinc coatings and aluminium alloys were investigated, their naturally formed protective layers were electrochemically characterized and corrosion relevant values were determined by using a gel pad based on polysaccharide. Corrosion relevant values allowed the differentiation of various coating systems and could describe the current protective effect provided by the coating. It is shown that gel-type electrolytes influence protective layers and coatings considerably less than corresponding bulk electrolytes and that an atmospheric wet film is approached by these test conditions. From the results it is evident that gel-type electrolytes represent a viable and promising field in corrosion research.
The paper presents a new method for the determination and evaluation of tafel factors using gel-type electrolytes and electrochemical frequency modulation technique (EFM). This relatively new electrochemical method offers the possibility to determine both polarization resistances and tafel factors within one measurement and in short measuring intervals. Starting from a comprehensive parameter study it is shown that a direct relationship between the two values exists that can be described mathematically. This contribution presents the determined tafel factors for the system gel-type electrolyte/zinc and discusses their applicability and their limits.
The corrosivity of atmospheres in Europe has changed significantly in recent decades. For the Federal Republic of Germany, no current values for the corrosion rate based on 1‐year atmospheric exposure of standard specimens can be found in the scientific literature after 2000. This paper presents results from a field exposure study in the Berlin metropolitan area and Helgoland in 2016. Based on standard specimens, values for the corrosion rate and the corresponding atmospheric corrosivity category are determined for open exposure and indirect weathering in a ventilated enclosure as sheltering after 1 year of exposure. The results prove that determined corrosivity categories are material‐specific. Sheltered exposure is a typical atmospheric situation for many building components. It allows statements on the effect of the concentration of airborne substances on the corrosivity beyond the normative requirements.
The corrosion resistance of aluminium surfaces is closely linked to the surfacecstate after a grinding process. For years, iron‐containing abrasive materials were suspected to lead to increased corrosion susceptibility after processing of aluminium surfaces. To prove a possible correlation between the iron content of an abrasive and the corrosion behaviour of aluminium components, scientific investigations and experimentally practical corrosion tests are necessary.
For the current investigation, specimens of a technical Al‐Si alloy from the same batch were used. The test specimens were mechanically ground with various resin‐bonded model abrasives containing different iron contents. The performed corrosion tests did not reveal a negative influence of the different iron‐containing abrasives on the corrosion behaviour of the Al–Si alloy.
However, the most sensitive measuring method (electrochemical noise)
showed differences in the surface activity depending on the type of abrasive.
The amount of absorbed energy in the keyhole as well as its spatial and temporal distribution is essential to model the laser beam welding process. The recoil pressure, which develops because of the evaporation process induced by the absorbed laser energy at the keyhole wall, is a key determining factor for the macroscopic flow of the molten metal in the weld pool during high-power laser beam welding. Consequently, a realistic implementation of the effect of laser radiation on the weld metal is crucial to obtain reliable and accurate simulation results. In this paper, we discuss manyfold different improvements on the laser-material interaction, namely, the ray tracing method, in the numerical simulation of the laser beam welding process. The first improvement relates to locating the exact reflection points in the ray tracing method using a so-called cosine condition in the determination algorithm for the intersection of reflected rays and the keyhole surface. A second correction refers to the numerical treatment of the Gaussian distribution of the laser beam, whose beam width is defined by a decay of the laser intensity by a factor of 1/e2, thus ignoring around 14% of the total laser beam energy. In the third step, the changes in the laser radiation distribution in the vertical direction were adapted by using different approximations for the converging and the diverging regions of the laser beam, thus mimicking the beam caustic. Finally, a virtual mesh refinement was adopted in the ray tracing routine. The obtained numerical results were validated with experimental measurements.
The objective of this study was to investigate the influence of externally applied magnetic fields on the weld quality in laser beam welding. The optimization of the process parameters was performed using the results of computer simulations. Welding tests were performed with up to 20 kW laser beam power. It was shown that the AC magnet with 3 kW power supply allows for a prevention of the gravity drop-out for full penetration welding of 20 mm thick stainless steel plates. For partial penetration welding it was shown that an0.5 T DC magnetic field is enough for a suppression of convective flows in the weld pool. Partial penetration welding tests with 4 kW beam power showed that the application of AC magnetic fields can reduce weld porosity by a factor of 10 compared to the reference joints. The weld surface roughness was improved by 50%.
Herein, an improved ray-tracing routine using a virtual mesh refinement approach is adopted in a 3D transientmultiphysics computational fluid Dynamics model for deep penetration wire feed laser beam welding. In a previous study, it was shown that the improved localization of the reflection points of the subrays within the keyhole leads to a more realistic development of the keyhole Depth being validated with experimental results. Another effect investigated in Detail herein is a drastic change in the flow behavior in the weld pool, which promotes the occurrence of a necking area in the solidification line and subsequent bulging under specific circumstances. This has a detrimental effect on the filler material element transport in the weld pool, leading to an inhomogeneous dilution of the added material. The numerical observations are backed up by experimentally obtained data, allowing to provide a clear physics-based explanation of the reduced mixing behavior of the filler wire in the melt pool.
This study presents mechanisms of the evolution of a narrowed region in the weld pool center during deep penetration laser beam welding. In numerous numerical studies presented in this study, it was also found that the local reduction of the weld pool size can cause detrimental effects on the melt flow behavior and the resulting properties of the welds. A particularly large influence of this effect was identified in three aspects. First, the local variation of the solidification sequence of the weld pool causes an increase in the hot-cracking susceptibility due to a locally delayed solidification. Second, it was proven that a change in the local length and width of the weld pool is associated with an adverse impact on the potential flow routes of the molten material that induces stronger local variations of its solidification. Thus, the element mixing, e.g., during the welding with filler materials, is blocked. This leads to a non-homogeneous chemical composition of the final weld and can cause undesired effects on the final material properties. Finally, another observed effect is related to the reduced ability of process pores to reach the top surface. As this type of porosity is usually produced around the keyhole tip, the change of the fluid flow regime above this area plays a significant role in determining the final path of the pores until the premature solidification in the middle of the weld pool captures them. This study summarizes mainly numerical results that were supported by selected experimental validation results.
The allergenic and inflammatory potential of proteins can be enhanced by chemical modification upon exposure to atmospheric or physiological oxidants. The molecular mechanisms and kinetics of such modifications, however, have not yet been fully resolved. We investigated the oligomerization and nitration of the grass pollen allergen Phl p 5 by ozone (O3), nitrogen dioxide (NO2), and peroxynitrite (ONOO–). Within several hours of exposure to atmospherically relevant concentration levels of O3 and NO2, up to 50% of Phl p 5 were converted into protein oligomers, likely by formation of dityrosine cross-links. Assuming that tyrosine residues are the preferential site of nitration, up to 10% of the 12 tyrosine residues per protein monomer were nitrated. For the reaction with peroxynitrite, the largest oligomer mass fractions (up to 50%) were found for equimolar concentrations of peroxynitrite over tyrosine residues. With excess peroxynitrite, the nitration degrees increased up to 40% whereas the oligomer mass fractions decreased to 20%. Our results suggest that protein oligomerization and nitration are competing processes, which is consistent with a two-step mechanism involving a reactive oxygen intermediate (ROI), as observed for other proteins. The modified proteins can promote pro-inflammatory cellular signaling that may contribute to chronic inflammation and allergies in response to air pollution.
A steel pipeline segment of 2.5 m length was subjected to quasi-static four-point bending load in three steps for studying the initial cracking and damage accumulation based on the Acoustic Emission (AE) technique and by the direct current potential drop (DCPD) technique. For the latter, a new post-test analysis method was established.
AE is found more sensitive to crack initiation than DCPD. Formation of mesoscopic and macroscopic cracks as well as their closure and the resulting friction generate weighted peak frequencies below 400 kHz, whereas microscopic cracking produces AE with broad band spectra identifiable by weighted peak frequencies above 400 kHz. Critical states alike the maximum load level and the leak opening were accompanied by peak amplitudes above 85 dBAE. This rather fundamental study provides a data base for possibly developing advanced strategies of detection and alarm systems based on acoustic monitoring of pipelines, or at least, steel structures.
Ferritic spheroidal graphite cast iron (SGI) materials have a remarkable technical poten-tial and economic impact in modern industry. These features are closely related to the question of how the cast materials can be produced without structural defects and graphite degenerations such as for example chunky graphite. Although the chunky graphite degeneration superficially seems to be well known, its metallurgical background is still controversially discussed, appropriate field-tested non-destructive tools for its quantification in castings are lacking and the knowledge on its impact on material properties is fairly limited. Addressing this status, the article is providing a current overview on the subject. Existing theories on formation and growth mechanisms of chunky graphite are briefly reviewed. Furthermore, from a metallurgical point of view, causes for the appearance of chunky graphite as well as preventive measures are concisely summarized. Particular attention is paid to the morphology of chunky graphite and how it can be characterized by destructive and non-destructive techniques. Special emphasis was laid on providing a comprehensive overview on the impact of chunky graphite on strength, ductility, fatigue limit, fatigue crack growth rate as well as fracture tough-ness of ferritic SGI materials based on experimental data. Moreover, conclusions for the assessment of castings affected by chunky graphite are drawn.
Fracture mechanics based component design requires appropriate fracture mechanics toughness data with respect to both, loading rate as well as test temperature. Taking high-rate loading into account such as with accidental scenarios, different standards such as ASTM E 1820 or BS 7448-3 provide some information on dynamic fracture mechanics testing. Nevertheless, the designations differ so that a validation of the own material specific test method used for dynamic R-curve determination is mandatory. In order to address this for ductile cast iron materials an experimental method for the reliable determination of dynamic J-integral crack resistance curves at -40 °C following the multiple specimen approach has been established and validated. The experimental concept offers some additional valuable features. Single values of dynamic crack initiation toughness can be determined using a single specimen technique based on crack sensors. Furthermore, an experimentally independent method is provided according to which CTOD δ5 R-curves can be established. The focus of the present paper is on the validation of the experimental low blow technique using a drop tower test system.
A drop tower test system was developed and set up to perform low blow tests at temperatures down to -40 °C. The system allows for a variation of the impact mass and height and was optimized for testing of ductile cast iron at stress intensity rates from approximately 5∙10⁴ to 3∙10⁵ MPa√ms⁻¹. This range of loading rate is characteristic for instance with crash scenarios of heavy sectioned DCI casks for radioactive materials. In order to address characteristic challenges of impact tests (test duration of microseconds up to milliseconds, inertial effects, signal oscillations), an appropriate full bridge strain gage method for the measurement of force directly on the specimen as well as a non-contact measurement of load line displacement using an optical extensometer have been developed and validated.
The low blow test requires either to prevent bouncing strikes of the hammer by using the stop block technique or to catch the hammer after its first strike. Both options are not part of the experimental concept and setup which have been realized here. The paper describes investigations which have been performed in order to make sure that bouncing strikes of the hammer do not cause additional crack extension in the specimen. This is necessary to ensure a unique relation between the work done and the achieved crack extension. The investigations covered the analysis of limit loads of the specimen with respect to the measured force. The measured stiffness of the specimen was assessed and signals of crack sensors were analyzed. Furthermore, an analysis of the mechanical behavior of the loading system and the specimen by optical observation was performed. Corresponding results are discussed in the paper. It had finally been proven that additional crack extension in the specimen due to bouncing strikes of the hammer is not to be expected under the given conditions of test setup, material and loading. It can be seen as a major experimental advantage that the striker does not have to be catched after the low blow test.
Photopolymer derived carbon grows in popularity, yet the range in available feature sizes is limited. Here we focus on expanding the field to low surface to volume ratio (SVR) structures. We describe a high temperature acrylic photopolymerizable precursor with FTIR and DSC and develop a thermal inert-gas treatment for producing architected carbon in the mm scale with SVR of 1.38 x10-3 μm-1. Based on TGA and MS, we distinguish two thermal regimes with activation energies of ~79 and 169 kJ mol-1, which we reason with mechanisms during the polymer’s morphologic conversion between 300 - 500 °C. The temperature range of the major dimensional shrinkage (300-440 °C, 50%) does not match the range of the largest alteration in elemental composition (440-600 °C, O/C 0.25-0.087%). The insights lead to an optimized thermal treatment with an initial ramp (2 °C min-1 to 350 °C), isothermal hold (14h), post hold ramp (0.5 °C min-1 to 440 °C) and final ramp (10 °C min-1 to 1000 °C). The resulting carbon structures are dimensionally stable, non-porous at the μm scale, and comprise an unprecedented variation in feature sizes (from mm to μm scale). The findings shall advance architected carbon to industrially relevant scales.
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
A self-restraint hot cracking test (free edge test) was used in combination with a novel optical measurement technique to determine the critical straining conditions for solidification cracking for the stainless steel grade 1.4828 (AISI 309). The Lucas-Kanade algorithm for the optical flow (OF) calculation was implemented to obtain the full-field displacement and then the full-field strain.
The use of external laser illumination with appropriate filters allows to obtain good image quality with good contrast. The critical straining conditions required for solidification cracking can be obtained by means the proposed technique in the immediate vicinity of the solidification front. A very good repeatability was demonstrated for the used measurement technique. The critical straining conditions for solidification cracking for the tested steel und under this welding conditions has been detected