Wissenschaftliche Artikel der BAM
Filtern
Erscheinungsjahr
Dokumenttyp
- Zeitschriftenartikel (2054) (entfernen)
Sprache
- Englisch (2011)
- Deutsch (40)
- Mehrsprachig (2)
- Portugiesisch (1)
Schlagworte
- Additive manufacturing (64)
- Fluorescence (55)
- SAXS (46)
- Nanoparticles (44)
- Concrete (37)
- MALDI-TOF MS (36)
- Quantum yield (36)
- Corrosion (35)
- Mechanochemistry (29)
- Polylactide (28)
- Ultrasound (28)
- Laser beam welding (26)
- Microstructure (25)
- Nanoparticle (24)
- Raman spectroscopy (24)
- Sensor (24)
- Lifetime (23)
- Mechanical properties (23)
- Quality assurance (23)
- Small-angle X-ray scattering (23)
- Laser-induced periodic surface structures (LIPSS) (22)
- Non-destructive testing (22)
- Additive Manufacturing (21)
- Synthesis (21)
- Dye (20)
- Photophysics (18)
- Imaging (17)
- Machine learning (17)
- Nano (17)
- Computed tomography (16)
- Laser powder bed fusion (16)
- Residual stress (16)
- Reference material (15)
- Thermography (15)
- XPS (15)
- Cancer (14)
- Electrochemistry (14)
- Hydrogen (14)
- Mass spectrometry (14)
- Nanomaterial (14)
- Simulation (14)
- Steel (14)
- Structural health monitoring (14)
- Alkali-activated materials (13)
- Catalysis (13)
- Crystallization (13)
- Fatigue (13)
- NIR (13)
- Photoluminescence (13)
- Scattering (13)
- X-ray computed tomography (13)
- Immunoassay (12)
- LIBS (12)
- Magnetic resonance imaging (12)
- Monitoring (12)
- Polymer (12)
- Polymers (12)
- Welding (12)
- AFM (11)
- Ectoine (11)
- ICP-MS (11)
- In situ (11)
- Leaching (11)
- Luminescence (11)
- Soil (11)
- X-ray diffraction (11)
- X-ray scattering (11)
- Creep (10)
- DNA (10)
- Electron microscopy (10)
- Flame retardant (10)
- Graphene (10)
- Lanthanide (10)
- Microscopy (10)
- NDT (10)
- Residual stresses (10)
- Aging (9)
- Biocides (9)
- Circular economy (9)
- EBSD (9)
- Femtosecond laser (9)
- Friction (9)
- Laser ablation (9)
- Mechanism (9)
- Method (9)
- Particle (9)
- Quantum dots (9)
- Solidification cracking (9)
- Spectroscopy (9)
- Ti-6Al-4V (9)
- Tomography (9)
- X-ray photoelectron spectroscopy (9)
- Bacteria (8)
- Cement (8)
- Cracks (8)
- Degradation (8)
- Distributed acoustic sensing (8)
- Heat treatment (8)
- High entropy alloy (8)
- Microplastics (8)
- Moisture (8)
- Molecularly imprinted polymers (8)
- Nanomaterials (8)
- Phosphorus (8)
- Process monitoring (8)
- Quantification (8)
- Radiation protection (8)
- Reliability (8)
- Reproducibility (8)
- Transmission electron microscopy (8)
- Wear (8)
- XRD (8)
- Air-coupled ultrasound (7)
- Atomic force microscopy (7)
- Bottom ash (7)
- DNA origami (7)
- Durability (7)
- ELISA (7)
- Energy transfer (7)
- Evolution (7)
- Interlaboratory comparison (7)
- MRI (7)
- Mechanical Engineering (7)
- Metals and Alloys (7)
- Metrology (7)
- Nanocomposite (7)
- Neutron diffraction (7)
- Neutron imaging (7)
- Raman (7)
- Reference materials (7)
- SEM (7)
- Sintering (7)
- Standards (7)
- Surface chemistry (7)
- Synchrotron (7)
- Traceability (7)
- Tribology (7)
- Ultrasonic-assisted milling (7)
- XANES (7)
- Affinity chromatography (6)
- Antimicrobial resistance (6)
- Automation (6)
- Biofilm (6)
- Biofilms (6)
- Biomaterials (6)
- CCS (6)
- Calibration (6)
- Characterization (6)
- Coda wave interferometry (6)
- Construction products (6)
- Contrast agent (6)
- Cyclization (6)
- DNA radiation damage (6)
- Density functional theory (6)
- Distributed fiber optic sensing (6)
- EXAFS (6)
- FTIR (6)
- Fiber optics sensors (6)
- Gadolinium (6)
- General Chemistry (6)
- Glass (6)
- Ground vibration (6)
- High-strength steel (6)
- Iron (6)
- Laser metal deposition (6)
- Lithium-ion battery (6)
- MOF (6)
- MOUSE (6)
- Mass Spectrometry (6)
- Microplastic (6)
- Multiplexing (6)
- Mycotoxins (6)
- NEXAFS (6)
- Optical probe (6)
- Oxidation (6)
- PH (6)
- Phase transformation (6)
- Porosity (6)
- Radiography (6)
- Resistance spot welding (6)
- Software (6)
- Structural Health Monitoring (6)
- Struvite (6)
- Surface functionalization (6)
- Synchrotron X-ray diffraction (6)
- Synchrotron radiation (6)
- TED-GC/MS (6)
- TIG welding (6)
- Upconversion nanoparticle (6)
- XRF (6)
- 3D printing (5)
- Analytical Chemistry (5)
- Antikörper (5)
- Artificial neural networks (5)
- BAMline (5)
- Bioinformatics (5)
- Bridge (5)
- Carbon steel (5)
- Catalyst (5)
- Coating (5)
- Composites (5)
- Cone calorimeter (5)
- Core-shell particles (5)
- Corrosion resistance (5)
- Cr(III) (5)
- Creep-resistant steel (5)
- DFT (5)
- Dangerous goods packagings (5)
- Diffraction (5)
- Diffusion (5)
- Dosimetry (5)
- Fatigue strength (5)
- Flow cytometry (5)
- General Materials Science (5)
- Gold (5)
- Graphene oxide (5)
- ICP-OES (5)
- Industry 4.0 (5)
- Infrared thermography (5)
- Iron oxide (5)
- L-PBF (5)
- LA-ICP-MS (5)
- Laser processing (5)
- Ligand (5)
- Low energy electrons (5)
- MIC (5)
- Material moisture (5)
- Mechanics of Materials (5)
- Metabolomics (5)
- Microcracking (5)
- Molecular dynamics (5)
- NMR (5)
- Nitrotyrosine (5)
- Numerical simulation (5)
- Polycondensation (5)
- Polyethylene (5)
- Polymerization (5)
- Porous materials (5)
- Radar (5)
- Radiation damage (5)
- Ring-expansion polymerization (5)
- Ring-opening polymerization (5)
- SWIR (5)
- Sewage sludge (5)
- Silver nanoparticles (5)
- Single particle (5)
- Stainless steel (5)
- Standardization (5)
- Surface integrity (5)
- Texture (5)
- Thermal runaway (5)
- Thick-walled steel (5)
- Toxicity (5)
- Tyrosine (5)
- Validation (5)
- X-ray refraction (5)
- AISI 316L (4)
- Aggregation (4)
- Air pollution (4)
- Alumina (4)
- Antibiotics (4)
- Archaeometry (4)
- Artificial neural network (4)
- BODIPY (4)
- Brightness (4)
- Carbon dioxide (4)
- Carbon nanotubes (4)
- Civil engineering (4)
- Classification (4)
- Complex (4)
- Compressive strength (4)
- Computed Tomography (4)
- Corrosion fatigue (4)
- Crack (4)
- Crystalinity (4)
- DAS (4)
- Damage (4)
- Damage detection (4)
- Data fusion (4)
- Data processing (4)
- Deep learning (4)
- Defects (4)
- Diffusible hydrogen (4)
- Digital image correlation (4)
- Digitalization (4)
- Distributed fiber sensing (4)
- Distributed vibration sensing (4)
- Ectoin (4)
- Electron backscatter diffraction (4)
- Environmental Chemistry (4)
- Escherichia coli (4)
- Fertilizer (4)
- Finite element analysis (4)
- Finite element method (4)
- Food (4)
- Fungi (4)
- Gas chromatography (4)
- Geant4 (4)
- General Medicine (4)
- Geosynthetics (4)
- HPLC (4)
- Halomonas elongata (4)
- Hardness (4)
- Heat accumulation (4)
- High alloyed steel (4)
- Hybrid laser arc welding (4)
- Hybrid laser-arc welding (4)
- Hydrolysis (4)
- Hyperbranched (4)
- IgG (4)
- In situ measurement (4)
- In situ monitoring (4)
- Inconel 718 (4)
- Industrial and Manufacturing Engineering (4)
- Isotope ratio (4)
- Kinetics (4)
- LC-MS/MS (4)
- Lab-on-a-chip (4)
- Laser Powder Bed Fusion (4)
- MALDI TOF MS (4)
- Materials Chemistry (4)
- Measurement uncertainty (4)
- Medium entropy alloy (4)
- Metaproteomics (4)
- Microdosimetry (4)
- Model updating (4)
- Modelling (4)
- Mycotoxin (4)
- Nanocomposites (4)
- Nanostructures (4)
- Neutron scattering (4)
- Nickel (4)
- Nitration (4)
- Nondestructive testing (4)
- Numerical modeling (4)
- Ontology (4)
- Oxygen evolution reaction (4)
- PFAS (4)
- Plastic deformation (4)
- Pollen (4)
- Pollution (4)
- Polyglycerol (4)
- Protein (4)
- Quality control (4)
- Quantitative spectroscopy (4)
- Radical scavenger (4)
- Raman microspectroscopy (4)
- Recycling (4)
- Regulation (4)
- Reinforced concrete (4)
- Residual Stress (4)
- Rheology (4)
- Rubber (4)
- SERS (4)
- Sample preparation (4)
- Scanning electron microscopy (4)
- Selective laser melting (SLM) (4)
- Signal enhancement (4)
- Signal processing (4)
- Small-angle scattering (4)
- Standardisation (4)
- Stress relief cracking (4)
- Surface (4)
- Synergy (4)
- Termites (4)
- Thin films (4)
- Titanium dioxide (4)
- ToF-SIMS (4)
- UV radiation (4)
- Ultrashort laser pulses (4)
- Ultrasonic testing (4)
- VOC (4)
- Virulence (4)
- Zerstörungsfreie Prüfung (4)
- 316L (3)
- AGIL (3)
- Acid resistance (3)
- Adsorption (3)
- Advanced materials (3)
- Allergy (3)
- Alloy 36 (3)
- Aluminium (3)
- Amino acid analysis (3)
- Amyloid (3)
- Analytical methods (3)
- Antibody (3)
- Artificial Intelligence (3)
- Bead (3)
- Benchmarking (3)
- Binder Jetting (3)
- Biosensing (3)
- Bisphenol A (3)
- Boehmite (3)
- Brain (3)
- Building and Construction (3)
- Building materials (3)
- C-F bond activation (3)
- C-OTDR (3)
- CALPHAD (3)
- Carbon (3)
- Cement hydration (3)
- Ceramic (3)
- Ceramics (3)
- Ceramics and Composites (3)
- Certification (3)
- Chemical analysis (3)
- Chromatography (3)
- Cocrystal (3)
- Compatible solute (3)
- Composite (3)
- Compression set (3)
- Condensed Matter Physics (3)
- Copper (3)
- Core-shell (3)
- Corrosion Fatigue (3)
- Corrosion testing (3)
- Crack evolution (3)
- Crack propagation (3)
- Cracking (3)
- Crystal (3)
- Crystal plasticity (3)
- Crystals (3)
- Cytotoxicity (3)
- DED (3)
- DFG SPP 2005 (3)
- DNA damage (3)
- Debye–Waller factor (3)
- Deep penetration (3)
- Defect detection (3)
- Diagnostics (3)
- Differential scanning calorimetry (3)
- Digital detector array (DDA) (3)
- Direct laser writing (3)
- Disinfection (3)
- Distributed sensing (3)
- Double-strand break (DSB) (3)
- Duplex stainless steels (3)
- EPDM (3)
- Ecology (3)
- Electrocatalysis (3)
- Embedded sensors (3)
- Emission test chamber (3)
- Energetic materials (3)
- Energy label (3)
- Epoxy (3)
- Ergot alkaloids (3)
- Excitation power density (3)
- Extracellular matrix (3)
- FAIR (3)
- FEM (3)
- FRET (3)
- Fatigue crack propagation threshold (3)
- Fe-N-C catalysts (3)
- Fire (3)
- Fire resistance (3)
- Fire test (3)
- Flame retardancy (3)
- Flame retardants (3)
- Flexible crystals (3)
- Fluidics (3)
- Fluoride (3)
- Food analysis (3)
- Fracture mechanics (3)
- Fuel cells (3)
- Gadofosveset (3)
- Geant4-DNA (3)
- Geotextiles (3)
- Giant magnetoresistance (3)
- HRMS (3)
- Hausner ratio (3)
- High entropy alloys (3)
- High temperature (3)
- High-density polyethylene (3)
- High-entropy alloys (3)
- High-resolution mass spectrometry (3)
- High-throughput (3)
- Human serum (3)
- Hydration (3)
- Hydrogen embrittlement (3)
- Hydroxyectoine (3)
- Impurities (3)
- Infrared spectroscopy (3)
- Inspection (3)
- Intermodulation AFM (3)
- Internal defects (3)
- Interphase (3)
- Isotope dilution (3)
- Kikuchi patterns (3)
- Lamb waves (3)
- Lanthanides (3)
- Laser powder bed fusion (L-PBF) (3)
- Laser thermography (3)
- Laser-induced X-ray emission (3)
- Liquid metal embrittlement (3)
- Lithium (3)
- MALDI (3)
- Machine Learning (3)
- Magnetic nanoparticles (3)
- Mass Spectroscopy (3)
- Metal phosphonate (3)
- Method development (3)
- Methodology (3)
- Micro-computed tomography (3)
- Microbiologically influenced corrosion (3)
- Microfluidics (3)
- Microwave (3)
- Modeling (3)
- Moisture transport (3)
- Molecular imaging (3)
- Molecular imprinting (3)
- Monoclonal antibody (3)
- Multiple crack propagation (3)
- NAP-XPS (3)
- NMR relaxometry (3)
- Nanopartikel (3)
- Nanoplastics (3)
- Nanostructure (3)
- Nanotechnology (3)
- Neutron tomography (3)
- Niobium carbide (3)
- Nucleation (3)
- Numerical modelling (3)
- Optical spectroscopy (3)
- Osmoadaptation (3)
- Oxygen reduction reaction (3)
- Ozone (3)
- PCA (3)
- PMMA (3)
- Papyrus (3)
- Peptide (3)
- Peptides (3)
- Permeability (3)
- Phase distribution (3)
- Phase-field simulation (3)
- Phenylalanine (3)
- Phonons (3)
- Photocatalysis (3)
- Pitting (3)
- Polycarbonate (3)
- Polyglycolide (3)
- Polyurethane (3)
- Post weld heat treatment (3)
- Post-weld heat treatment (3)
- Precipitation (3)
- Process Analytical Technology (3)
- Process Industry (3)
- Proper generalized decomposition (3)
- Protein A (3)
- Prozessanalytik (3)
- Pseudomonas aeruginosa (3)
- Reconstruction algorithm (3)
- Reference Material (3)
- Resource efficiency (3)
- Roughness (3)
- SSB (3)
- Safety characteristics (3)
- Screening (3)
- Self-assembly (3)
- Sensitization (3)
- Sensors (3)
- Shape memory polymer (3)
- Sift-proofness (3)
- Single particle ICP-MS (3)
- Single-strand break (SSB) (3)
- Small-angle x-ray scattering (3)
- Smart structures (3)
- Solid state NMR (3)
- Solubility (3)
- Spalling (3)
- Strength (3)
- Stress relaxation (3)
- Submerged arc welding (3)
- Super resolution (3)
- Surfaces, Coatings and Films (3)
- Sustainability (3)
- Switch (3)
- TEM (3)
- Temperature (3)
- Tensile properties (3)
- Termite (3)
- Teststreifen (3)
- Thermal desorption (3)
- Thermal expansion (3)
- Thermodynamics (3)
- Thermoelectrics (3)
- Thermoplastics (3)
- Topas (3)
- Toxicology (3)
- Transcriptomics (3)
- Transesterification (3)
- Transformation products (3)
- UL 94 (3)
- Ultrashort pulsed laser (3)
- Uncertainty (3)
- Upconversion (3)
- Upscaling (3)
- Value of information (3)
- Varestraint test (3)
- Viscosity (3)
- Volatile organic compounds (3)
- WAAM (3)
- Weathering (3)
- Weld pool shape (3)
- Wood Protection (3)
- X-ray imaging (3)
- XANES spectroscopy (3)
- XAS (3)
- XCT (3)
- Zinc (3)
- Zirconia (3)
- 2PP (2)
- 3D-printing (2)
- AAA (2)
- AAS (2)
- AISI 304L (2)
- Ab initio (2)
- Absolute isotope ratio (2)
- Accelerated testing (2)
- Acoustic emission (2)
- Acoustic sensing (2)
- Acoustic-flow interaction (2)
- Active thermal imaging (2)
- Additive manufacturing (AM) (2)
- Advanced high strength steels (2)
- Aeroacoustics (2)
- Affinitätschromatographie (2)
- Ageing (2)
- Aggregation induced emission (2)
- Air sampling (2)
- Algorithms (2)
- Alkali silica reaction (2)
- Alkali zinc borate glasses (2)
- Alloy modification (2)
- Aluminum alloys (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Amorphization (2)
- Amorphous carbon (2)
- Amoxicillin (2)
- Amperometry (2)
- Amphiphilicity (2)
- Analysis (2)
- Angle of repose (2)
- Anode (2)
- Anodization (2)
- Aqueous solution (2)
- Aromatic amino acid analysis (2)
- Artificial ageing (2)
- Artificial intelligence (2)
- Assay (2)
- Assessment (2)
- Atherosclerosis (2)
- Atmospheric boundary layer (2)
- Atomic weight (2)
- Atomistic models (2)
- Au (2)
- AuNP (2)
- Austenite-to-martensite transformation (2)
- Automated image analysis (2)
- Automated synthesis (2)
- Axial force (2)
- BESSY (2)
- BOFDA (2)
- Bacterial attachment (2)
- Ball milling (2)
- Barcoding (2)
- Base damage (2)
- Base loss (2)
- Bassanite (2)
- Bauprodukte (2)
- Baustoffrecycling (2)
- Bead-based assay (2)
- Behavior and Systematics (2)
- Benz[a]anthracene (BaA) (2)
- Benzo[a]pyrene (BaP) (2)
- Beta decay (2)
- Betatron (2)
- Beton (2)
- Bio-SAXS (2)
- Bio-weathering (2)
- Bioactive glass (2)
- Bioactivity (2)
- Bioceramics (2)
- Biochemistry (2)
- Bioconjugation (2)
- Biodeterioration (2)
- Biodiesel (2)
- Biomarker (2)
- Biosensor (2)
- Biotechnology (2)
- Biotests (2)
- Bismuth (2)
- Black fungi (2)
- Black yeast (2)
- Bonding Analysis (2)
- Borehole (2)
- Brachytherapy (2)
- Bragg-edge imaging (2)
- Brillouin (2)
- Brillouin distributed sensing (2)
- Broadband dielectric spectroscopy (2)
- Bulge effect (2)
- Bulk metallic glasses (2)
- Bus interior materials (2)
- CCUS (2)
- CO2 (2)
- CONSENS (2)
- Calcined clay (2)
- Calcium carbonate (2)
- Calcium sulfate (2)
- Cancer treatment (2)
- Cannibalism (2)
- Carbide (2)
- Carbon capture and storage (2)
- Carbon fibers (2)
- Carbonation (2)
- Carrier protein (2)
- Cells (2)
- Cellular internalization (2)
- Cellular solids (2)
- Cellulose (2)
- Cement matrix (2)
- Ceramic matrix composites (2)
- Certified reference material (2)
- Charge transfer (2)
- Charring (2)
- Chemical composition (2)
- Chemisorption (2)
- Chemometrics (2)
- Chloride (2)
- Chlorides (2)
- Chlorine (2)
- Civil and Structural Engineering (2)
- Clustered nanoparticles (2)
- Clustering (2)
- Coatings and Films (2)
- Cobalt (2)
- Coda Wave Interferometry (CWI) (2)
- Collagen (2)
- Colourants (2)
- Combustion ion chromatography (CIC) (2)
- Comparability (2)
- Condition monitoring (2)
- Conformation (2)
- Conservation (2)
- Contact resonance (2)
- Convolutional neural network (2)
- Coptic (2)
- Core-shell nanoparticles (2)
- Core−shell particles (2)
- Corrosion protection (2)
- Cosolute (2)
- Coulomb explosion (2)
- CrCoNi (2)
- CrMnFeCoNi (2)
- Crack depth (2)
- Crack detection (2)
- Critical strain (2)
- Crop protection products (2)
- Cross-linking (2)
- Crystal orientation (2)
- Crystal structure (2)
- Crystallographic texture (2)
- Cultural heritage (2)
- Cuprorivaite (2)
- Cyclic (2)
- Cyclic R-curve (2)
- Cyclic loading (2)
- DFT calculation (2)
- DIRECTT (2)
- DMSO (2)
- DOPO (2)
- DSC (2)
- DVS (2)
- Data Fusion (2)
- Data analysis (2)
- Data preparation (2)
- Data science (2)
- Dead Sea Scrolls (2)
- Decision support (2)
- Delamination (2)
- Delta scale (2)
- Density separation (2)
- Densty-based Thermodynamics (2)
- Dentistry (2)
- Depletion force (2)
- Derivatization (2)
- Design of experiment (2)
- Design of experiments (2)
- Destructive testing (2)
- Detection (2)
- Deuterium (2)
- Diagnosis (2)
- Diffraction Enhanced Imaging (2)
- Digestion (2)
- Digital Twins (2)
- Digital image correlation (DIC) (2)
- Digital radiography (2)
- Digitalisation (2)
- Dimerization (2)
- Direct laser interference patterning (DLIP) (2)
- Directed Energy Deposition (2)
- Discotic Liquid Crystals (2)
- Disposal (2)
- Dissolution (2)
- Distortion (2)
- Distributed fiber optic sensors (2)
- Distributed humidity sensing (2)
- Distributed strain sensing (2)
- Dityrosine (2)
- Documentation (2)
- Dothideomycetes (2)
- Dripping (2)
- Drop test (2)
- Dual sensing (2)
- Dynamic Light Scattering (2)
- Dynamic loads (2)
- Dynamic test (2)
- ESEM (2)
- Ecodesign (2)
- Ecotoxicity (2)
- Eddy current testing (2)
- Editorial (2)
- Education (2)
- Egyptian blue (2)
- Elasticity (2)
- Elastomers (2)
- Electrochemical impedance spectroscopy (2)
- Electrochemical methods (2)
- Electromagnetic weld pool support (2)
- Electron backscattered diffraction (2)
- Electron beam melting (2)
- Electron beam-induced fragmentation (2)
- Electronic (2)
- Electronic, Optical and Magnetic Materials (2)
- Element-specific spectroscopy (2)
- Elemental composition (2)
- Embedded humidity sensors (2)
- Emission spectroscopy (2)
- Encapsulation (2)
- Endocrine disruptor (2)
- Endokrine Disruptoren (2)
- Energy deposit (2)
- Energy dispersive diffraction (2)
- Energy efficiency (2)
- Enhancement (2)
- Entomopathogen (2)
- Environment (2)
- Environmental conditions (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Epoxy nanocomposites (2)
- Epoxy resin (2)
- Esterification (2)
- Ettringite (2)
- Europium (2)
- Evaporation (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FPLC (2)
- FTIR spectroscopy (2)
- Fatigue damage (2)
- Fatigue tests (2)
- Fatty acid metabolism (2)
- Fe L3 edge absorption spectra (2)
- Femtosecond laser ablation (2)
- Femtosecond laser processing (2)
- Ferromagnetism (2)
- Ferumoxytol (2)
- Fiber optic sensors (2)
- Fiber orientation (2)
- Fiber-optic sensors (2)
- Finite element simulation (2)
- Fire behaviour (2)
- Fire protection (2)
- Fire statistics (2)
- Flame inhibition (2)
- Flammability (2)
- Flow properties (2)
- Flowability (2)
- Fluoreszenz (2)
- Fluorides (2)
- Foaming (2)
- Force-distance curves (2)
- Formaldehyde (2)
- Forsterite (2)
- Fracture (2)
- Frequency analysis (2)
- Fuel Cells (2)
- Full notch creep test (FNCT) (2)
- Full penetration (2)
- Functionalized graphene (2)
- G5P (2)
- GFRP (2)
- GMA welding (2)
- GVP (2)
- Gap bridgeability (2)
- Gas analysis (2)
- Gas chromatography (GC) (2)
- Gas explosion (2)
- Gas metal arc welding (2)
- Gas tungsten arc welding (GTAW) (2)
- Gel electrolytes (2)
- Gel electrophoresis (2)
- Gel-type electrolytes (2)
- General Earth and Planetary Sciences (2)
- Geology (2)
- Geometrical effect (2)
- Geophysics (2)
- Geothermal (2)
- Geruchsmessung (2)
- Glass powder (2)
- Glass transition (2)
- Glyphosate (2)
- Gold Nanoparticles (2)
- Grain boundaries (2)
- Grain refinement (2)
- Graphitization (2)
- Growth kinetics (2)
- Gut microbiota (2)
- Gypsum (2)
- HAXPES (2)
- HIP (2)
- HPLC-MS/MS (2)
- HTS (2)
- Halophilic bacteria (2)
- Hapten (2)
- Hardmetal (2)
- Health, Toxicology and Mutagenesis (2)
- Heart failure (2)
- Heat control (2)
- Heat transfer (2)
- Helium (2)
- Heterogeneity (2)
- Heterogeneous catalysis (2)
- High Alloyed Steel (2)
- High strength steel (2)
- High strength steels (2)
- High-performance concrete (2)
- High-power laser beam welding (2)
- High-strength structural steel (2)
- Hot cracking (2)
- Hot stamping (2)
- Human behaviour (2)
- Humidity (2)
- Hybrid metrology (2)
- Hybrid mixtures (2)
- Hybridoma (2)
- Hydrazinolysis (2)
- Hydrogen Embrittlement (2)
- Hydrogen assisted cracking (2)
- Hydrogen evolution reaction (2)
- Hydrogen storage (2)
- Hydrogen-assisted cracking (2)
- Hydroxyl radical (2)
- Hydroxyl radicals (2)
- ISO/IEC 27001 (2)
- Image analysis (2)
- Image quality (2)
- Immunoaffinity extraction (2)
- Immunocapture (2)
- Immunogen (2)
- Immunoglobulins (2)
- Immunosensor (2)
- Impact simulation (2)
- Impact target (2)
- Implant test (2)
- In-situ (2)
- In-vivo (2)
- Incineration bottom ash (2)
- Indium phosphide (2)
- Indoor air (2)
- Indoor air quality (2)
- Inflammation (2)
- Information security (2)
- Initial crack size (2)
- Ink analysis (2)
- Insect biotechnology (2)
- Instrumentation (2)
- Inter layer time (2)
- Interface (2)
- Interfacial shear strength (2)
- Intumescence (2)
- Ionic liquid (2)
- Ionization (2)
- Ionizing radiation (2)
- Ionizing radiation damage (2)
- Irradiation (2)
- Isogeometric analysis (2)
- Isotope (2)
- Isotope dilution (ID) (2)
- Isotope ratios (2)
- Joint sparsity (2)
- Keratin (2)
- LC-MS (2)
- LEE (2)
- LIF (2)
- LPBF (2)
- Label (2)
- Lapis lazuli (2)
- Laser (2)
- Laser Doppler vibrometer (2)
- Laser beam melting (2)
- Laser beam melting (LBM) (2)
- Laser energy distribution (2)
- Laser hybrid welding (2)
- Laser scanning microscopy (LSM) (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Lateral flow assay (2)
- Lattice distortion (2)
- Lattice misfit (2)
- Lattice parameters (2)
- Lattice structures (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leaching control mechanisms (2)
- Leaching tests (2)
- Lead borate glasses (2)
- Lead ions (2)
- Leather (2)
- Leichte Gesteinskörnungen (2)
- Lethal dose (2)
- Life cycle assessment (2)
- Life sciences (2)
- Limit of detection (2)
- Lipidomic profile (2)
- Liquid Metal Embrittlement (2)
- Liquid chromatography (LC) (2)
- Liquid phase sintering (2)
- Lithium-ion batteries (2)
- Livermore model (2)
- Local structure (2)
- Lorenz transmission electron microscopy (2)
- Low transformation temperature (LTT) steel (2)
- Low-cost (2)
- Lubricants (2)
- Lysimeter (2)
- MC-ICP-MS (2)
- MCS (2)
- Magnesium (2)
- Magnesium hydroxide (2)
- Magnetic beads (2)
- Magnetic properties (2)
- Magnetism (2)
- Management system standard (2)
- Manuscripts (2)
- Marine littering (2)
- Martensitic stainless steels (2)
- Maschinelles Lernen (2)
- Mass spectrometry (MS) (2)
- Material flow analysis (2)
- Materials (2)
- Materials Characterization (2)
- Materials characterization (2)
- Materials informatics (2)
- Mauerwerkbruch (2)
- Mechanical property (2)
- Medical implants (2)
- Melting experiments (2)
- Mercury (2)
- Mesoporous materials (2)
- Metabolic stress (2)
- Metabolism (2)
- Metal (2)
- Metal fluorides (2)
- Metal-organic-frameworks (2)
- Metallic glasses (2)
- Methane (2)
- Metrologie (2)
- Micro-XRF (2)
- Microarray (2)
- Microbeads (2)
- Microbiome (2)
- Microcolonial fungi (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure Design (2)
- Microstructure characterization (2)
- Mikrofluidik (2)
- Mikroplastik (2)
- Milling (2)
- Mitigation (2)
- Mixed ink (2)
- Mixture toxicity (2)
- Model (2)
- Modular Production (2)
- Modulus (2)
- Molecular Dynamics (2)
- Molecularly Imprinted Polymers (2)
- Monolithic column (2)
- Monte Carlo simulation (2)
- Monte-Carlo simulation (2)
- Monte-Carlo simulations (2)
- Multi-principal element alloys (2)
- Multidisciplinary (2)
- Multiphoton lithography (2)
- Multiplex (2)
- Multivariate data analysis (2)
- NMR spectroscopy (2)
- NP (2)
- Nanoindentation (2)
- Nanomaterial classification (2)
- Nanometrology (2)
- Nanoparticle concentration (2)
- Nanoscience (2)
- Native oxide (2)
- Neural network (2)
- Neural networks (2)
- Neutron radiography (2)
- Ni (2)
- Nickel-base superalloys (2)
- Niobium (2)
- Niobium carbide (NbC) (2)
- Nitrogen (2)
- Nitrogen dioxide (2)
- Nitrogen oxides (2)
- Non-Destructive Testing (2)
- Non-destructive Testing (2)
- Non-equilibrium thermodynamics (2)
- Nontarget analysis (2)
- Nuclear magnetic resonance (2)
- Number density (2)
- Numerical process simulation (2)
- OH radical (2)
- OH radical scavenger (2)
- Offshore (2)
- Online NMR Spectroscopy (2)
- Online NMR spectroscopy (2)
- Online monitoring (2)
- Open Science (2)
- Open data (2)
- Open science (2)
- OpenFOAM (2)
- Optical and Magnetic Materials (2)
- Optical detection (2)
- Optical fiber sensor (2)
- Optical flow (2)
- Optical tomography (2)
- Optimization (2)
- Optimization technique (2)
- Organic Chemistry (2)
- Organic contaminants (2)
- Orientation precision (2)
- Origami (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- Oxygen (2)
- P92 (2)
- PBF-LB/M (2)
- PFEM (2)
- PGAA (2)
- PGM-free catalysts (2)
- PIXE (2)
- POD (2)
- Particle scattering (2)
- Particle scattering simulations (2)
- Particle size (2)
- Particle size distribution (2)
- Particles (2)
- Partikel (2)
- Passivation (2)
- Passive RFID (2)
- Pathogen (2)
- Penelope model (2)
- Peptide library (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Phase diagrams (2)
- Phase transformations (2)
- Phosphates (2)
- Phosphine oxide (2)
- Phosphorus fertilizer (2)
- Phosphorus recovery (2)
- Phosphorylated peptides (2)
- Photodegradation (2)
- Phylogeny (2)
- Physical and Theoretical Chemistry (2)
- Physical and theoretical chemistry (2)
- Physics (2)
- Physisorption (2)
- Pigment analyses (2)
- Pigments (2)
- Pipeline steel (2)
- Pitting corrosion (2)
- Plant Science (2)
- Plasma (2)
- Plasma-transferred arc welding (2)
- Plasmid DNA in water (2)
- Plasticity (2)
- Polarity (2)
- Policy making (2)
- Poly(ester urethane) (2)
- Polycyclic aromatic hydrocarbon (PAH) (2)
- Polymer optical fiber (2)
- Polymer optical fibre (2)
- Polymere (2)
- Polymorphism (2)
- Polysaccharides (2)
- Pore space (2)
- Portland cement (2)
- Post-injection pressure drop (2)
- Powders (2)
- Pre-ignition pressure rise (2)
- Prediction (2)
- Predisposal (2)
- Preferential exclusion (2)
- Preheating (2)
- Probability of detection (2)
- Probe (2)
- Process analytical technology (2)
- Process atmosphere (2)
- Process control (2)
- Production (2)
- Prostate cancer (2)
- Protein G (2)
- Protein nitration (2)
- Protein unfolding (2)
- Proteins (2)
- Proteomics (2)
- Proton conductivity (2)
- Provenance studies (2)
- Purification (2)
- Purity (2)
- Quality (2)
- Quality Control (2)
- Quality Infrastructure (2)
- Quantum dot (2)
- Quasicrystal (2)
- RFID sensors (2)
- ROPPOC (2)
- ROS (2)
- Radiation damage to biomolecules (2)
- Radiation therapy (2)
- Radiationtherapy (2)
- Radioactive decay (2)
- Radioactive waste (2)
- Radiolysis (2)
- Raman microscopy (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Ray tracing (2)
- Reactive oxygen species (2)
- Real-time process monitoring (2)
- Recovery (2)
- Rectangular cross-section (2)
- Red phosphorus (2)
- Reference (2)
- Reference data (2)
- Refill friction stir spot welding (2)
- Refraction (2)
- Regeneration (2)
- Regularization (2)
- Reinforced Concrete (2)
- Remediation (2)
- Renewable Energy (2)
- Renewable Energy, Sustainability and the Environment (2)
- Representative specimens (2)
- Residual stress analysis (2)
- Rice husk ash (2)
- Ring opening polymerization (2)
- Risk assessment (2)
- Road tankers (2)
- SAFT (2)
- SHM (2)
- SSRT (2)
- SZ2080 negative photo-resist (2)
- Safety (2)
- Salt (2)
- Salts (2)
- Sapphire (2)
- Scaffold (2)
- Scanning electron microscopy (SEM) (2)
- Screed (2)
- Secondary building materials (2)
- Secondary ion mass spectrometry (2)
- Secondary raw materials (2)
- Selective Laser Melting (SLM) (2)
- Selective laser melting (2)
- Self-healing (2)
- Self-organization (2)
- Semiconductor (2)
- Sensor requirements (2)
- Sensorpartikel (2)
- Sensors in concrete (2)
- Sequence coverage (2)
- Sequential learning (2)
- Serum (2)
- Sewage sludge ash (2)
- Shell (2)
- Short crack propagation (2)
- Short-range order (2)
- Sialic acid (2)
- Silica (2)
- Silicon (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single crystal (2)
- Single molecule (2)
- Single pass welding (2)
- Single-atom catalysts (2)
- Single-source precursors (2)
- Single-stranded DNA-binding proteins (2)
- Size (2)
- Sliding simulation (2)
- Smart sensors (2)
- Smoke gas emission (2)
- Sol-gel (2)
- Solid-state batteries (2)
- Solutions (pH, salinity, cosolutes) (2)
- Sorption isotherm (2)
- Space (2)
- Spark plasma sintering (2)
- Spectral induced polarization (2)
- Spectroscopic ellipsometry (2)
- Sr isotopes (2)
- Stability (2)
- Stainless Steel (2)
- Steels (2)
- Stimulated Brillouin scattering (2)
- Strain measurement (2)
- Stress corrosion cracking (2)
- Stress intensity factor (2)
- Structural dynamics (2)
- Structural integrity (2)
- Structural sealant glazing (2)
- Structure-property relationship (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sulfur (2)
- Surface analysis (2)
- Surface modification (2)
- Surface plasmon resonance (2)
- Surface roughness (2)
- Surface-enhanced Raman scattering (2)
- Surfaces (2)
- Sustainability and the Environment (2)
- Symbiosis (2)
- Synchrotron X-ray refraction radiography (2)
- Synthetic Training Data (2)
- Synthetic peptides (2)
- Sythesis (2)
- T-SEM (2)
- TOPAS (2)
- TOPAS-nbio (2)
- TXRF (2)
- Technological innovation system (2)
- Tempered martensite-ferritic steel (2)
- Terrorism (2)
- Test strips (2)
- Tetrapyrrolic Fe–N–C powders (2)
- Theory (2)
- Thermal analysis (2)
- Thermal conductivity (2)
- Thermal history (2)
- Thermal treatment (2)
- Thermo-responsiveness (2)
- Thermodynamic modelling (2)
- Thermoplastic polyurethane (2)
- Tin acetates (2)
- Tineola bisselliella (2)
- Titanium (2)
- Titanium alloy (2)
- Titanium alloys (2)
- Tool wear (2)
- Torsion (2)
- Train-induced ground vibration (2)
- Transformation (2)
- Transformation product (2)
- Transition metals (2)
- Transmission electron microscopy (TEM) (2)
- Tribologie (2)
- Triple isotope fractionation (2)
- Triplet-triplet annihilation (2)
- Truss structures (2)
- Tryptophan (2)
- Tubular X-joints (2)
- Tumor (2)
- Tumor metabolism (2)
- Two-photon polymerization (2)
- Ultra thin polymer films (2)
- Ultrafine particles (2)
- Ultraschall (2)
- Ultrashort laser material interaction (2)
- Ultrasonic (2)
- Ultrasonic guided waves (2)
- Ultrasonic imaging (2)
- Upconversion nanoparticles (2)
- Vaporization (2)
- Vehicle-track interaction (2)
- Vickers indentation (2)
- Virology (2)
- Virus (2)
- Virus inhibition (2)
- Volume fraction (2)
- Wasser (2)
- Waste management (2)
- Waste treatment (2)
- Water (2)
- Water analysis (2)
- Weld pool dynamics (2)
- Welding simulation (2)
- Weldments (2)
- Wind energy (2)
- Wind turbine (2)
- Wire arc additive manufacturing (2)
- Wood (2)
- Wood protection (2)
- X-ray (2)
- X-ray Photoelectron Spectroscopy (2)
- X-ray absorption near-edge structure (XANES) spectroscopy (2)
- X-ray absorption spectroscopy (2)
- X-ray backscatter imaging (2)
- X-ray computed tomography (CT) (2)
- X-ray computed tomography (XCT) (2)
- X-ray spectroscopy (2)
- X-ray tomography (2)
- Yb(III) complex (2)
- Young’s modulus (2)
- ZIF (2)
- ZIF-8 (2)
- ZfP (2)
- Zinc coatings (2)
- Zink (2)
- atomic force microscopy (2)
- cocrystal (2)
- in situ (2)
- magnesium (2)
- mass spectrometry (2)
- nanoparticle (2)
- ssDNA (2)
- surface modification (2)
- x-ray diffraction (2)
- µ-CT (2)
- Փ-OTDR (2)
- 'Click' reaction (1)
- (Quantitative) Structure-Active Relationships (1)
- 1-indanol (1)
- 1-propyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (1)
- 100Cr6 (AISI 52100) steel (1)
- 12%Cr steel (1)
- 150th anniversary (1)
- 150th anniversary of BAM (1)
- 17α-ethinylestradiol (EE2) (1)
- 1H-NMR (1)
- 2,5-dihydroxyacetophenone (1)
- 20 L-sphere (1)
- 20L-sphere (1)
- 2101 duplex stainless steel (1)
- 266nm (1)
- 280 nm (1)
- 2D Materials (1)
- 2D chromatography (1)
- 2D nanomaterial (1)
- 3-dimensional microscopy (1)
- 3D (1)
- 3D Scanning (1)
- 3D deep convolutional neural network (3D DCNN) (1)
- 3D microstructure (1)
- 3D-Mikrofluidik (1)
- 3DCP (1)
- 4-Dimensional scanning transmission (1)
- 4D tomographic data (1)
- 4H–SiC (1)
- 6xHis (1)
- 9% Ni Steel (1)
- 9%Ni steel (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- A key interface (1)
- A-DNA conformation (1)
- AAAA (1)
- ABC (1)
- ABID (1)
- ABS (1)
- AC magnetic field (1)
- ACEnano (1)
- ACEnet (1)
- ADC (1)
- ADMM (1)
- AEMFC (1)
- AF4 (1)
- AFM cantilever vibration (1)
- AFM force spectroscopy (1)
- AFM intermittent contact (1)
- AFm phase (1)
- AGE (1)
- AHSS (1)
- AHTN (1)
- AHTN-COOMe (1)
- AIE (1)
- AIS (1)
- AM feature integration (1)
- ANFO (1)
- API molecule (1)
- ASR (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- ASTM E647 (1)
- ATCUN (1)
- ATZ (1)
- AZ31 (1)
- Aantimicrobial (1)
- Aautomatisation (1)
- Ab initio Simulation (1)
- Ab initio calculations (1)
- Ab initio simulation (1)
- Ab initio thermodynamics (1)
- Abasic site (1)
- Abbildungsverfahren (1)
- Abdichtbauwerk / Verschlussbauwerk (1)
- Aberfan flowslide (1)
- Absolute dose (1)
- Absorption (1)
- Absorption correction (1)
- Abuse testing (1)
- Abwasser (1)
- Academic Software (1)
- Academic genealogy (1)
- Accelerated aging (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Accelerator mass spectrometry (1)
- Accoustic emission (1)
- Accreditation (1)
- Accuracy (1)
- Acetic acid (1)
- Acetylation (1)
- Acid attack (1)
- Acid-leaching (1)
- Acidic oxygen evolution reaction (1)
- Acidity (1)
- Acidobacteria (1)
- Acoustic (1)
- Acoustic emission analysis (1)
- Acoustic emission monitoring (1)
- Acoustic resonance (1)
- Acoustic test (1)
- Acoustical damping (1)
- Acoustics (1)
- Acousto-optic effect (1)
- Acoustoelasticity (1)
- Acrylamide (1)
- Activation energy (1)
- Active polymer (1)
- Active site density (1)
- Active thermography (1)
- Acute myocardial infarction (1)
- Adaptation (1)
- Adaption (1)
- Adaptive importance sampling (1)
- Additive Fertigung (1)
- Additive Manufacture (1)
- Additive Manufacturing (AM) (1)
- Additive manufactured Ni-base superalloys (1)
- Additives (1)
- Adhesives (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Adjuvantien (1)
- Adoption (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Adsorbed water layer thickness (1)
- Adsorbtion (1)
- Adsorption of pyridine (1)
- Adulteration (1)
- Adulteration detection (1)
- Advanced Materials (1)
- Advanced calorimetry (1)
- Advanced high-strength steel (1)
- Advanced manufacturing (1)
- Advanced material (1)
- Advanced nanomaterials (1)
- Aerial robot olfaction (1)
- Aeroallergens (1)
- Aerodynamic levitation (1)
- Aerosol (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosolsensor (1)
- Aerospace applications (1)
- Affinity (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Affinitätsextraktion (1)
- Aflatoxin (1)
- Ag (1)
- Ag nanoparticles (1)
- Ag-LDI-MS (1)
- AgInS (1)
- Agar (1)
- Agarose (1)
- Agarose gel electrophorese (1)
- Age hardening (1)
- Aggregates (1)
- Aggregation-induced emission (1)
- Aggressive environments (1)
- Agricultural by-product (1)
- Agriculture (1)
- Air analysis (1)
- Air conditioner (1)
- Air filter samples (1)
- Air particulate matter (1)
- Air quality monitoring (1)
- Air-based (1)
- Air-conditioning (1)
- Air-coupled transducers (1)
- Airport (1)
- Akaike information criterion picker (1)
- Akkreditierung (1)
- Aktivkohle (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- AlCl (1)
- AlMg0.7SiTiB filler wire (1)
- AlSi10Mg (1)
- AlSi10Mg alloy (1)
- Alanine scan (1)
- Albumin (1)
- Alcium alkali phosphate (1)
- Alexander von Humboldt (1)
- Algal toxins (1)
- Alkali Activated Concrete (1)
- Alkali aggregate reaction (1)
- Alkali aluminosilicate glasses (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated (1)
- Alkali-activated binders (1)
- Alkali-activated building materials (1)
- Alkali-activated slag (1)
- Alkali-silica reaction (1)
- Alkaline brines (1)
- Alkaline earth metal coordination polymers (1)
- Alkalis (1)
- Alkali–silica reaction (1)
- Alkyd resin-based coating (1)
- Allergene (1)
- Allergie (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alpha (1)
- Alpha-tricalcium phosphate (1)
- Altenuene (1)
- Alternaria mycotoxins (1)
- Alternative Energieträger (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminium fluorides (1)
- Aluminium hydroxide (1)
- Aluminium oxide hydroxide (1)
- Aluminium teflates (1)
- Aluminosilicate glasses (1)
- Aluminum (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Aluminum bronze (1)
- Aluminum diethyl phosphinate (1)
- Aluminum oxide (1)
- Aluminum trihydroxide (ATH) (1)
- Alveolar-capillary coculture model (1)
- Alzheimer’s disease (1)
- Al‐Cu‐Li‐alloy (1)
- Al–Si metal matrix composites (1)
- Ambient aerosols (1)
- Ammonium polyphosphate (1)
- Amorphous materials (1)
- Amorphous silica (1)
- Amphiphilic dumbbells (1)
- Amplification (1)
- Amyloid-beta (1)
- Anaerobic pathways (1)
- Analysis technique (1)
- Analytic signal (1)
- Analytical calculation (1)
- Analytical model (1)
- Analytical quality assurance (1)
- Analytical sciences (1)
- Analytical screening techniques (1)
- Analyzer-Based Imaging (1)
- Anatoxin-a (1)
- Anatoxin-a(s) (1)
- Ancestor of opportunistic pathogens & lichens (1)
- Ancient document production (1)
- Aneurysm (1)
- Angiography (1)
- Angiotensin II (1)
- Angle measurement (1)
- Angle wedge (1)
- Anhydrite (1)
- Aniline (1)
- Animal immune system (1)
- Animal slurry (1)
- Anion recognition (1)
- Anisotropic fiber orientation (1)
- Anisotropy (1)
- Annealing (1)
- Anobium punctatum (1)
- Anodic oxidation (1)
- Anomalous Small Angle X-ray Scattering (1)
- Anosteocytic bone (1)
- Antagonism (1)
- Antagonists (1)
- Antenna effect (1)
- Anthropocene (1)
- Anti-corrosion coatings (1)
- Anti-counterfeiting (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial properties (1)
- Antibacterial surfaces (1)
- Antibodies (1)
- Antibody Purification (1)
- Antibody coating (1)
- Antibody drug conjugate (1)
- Antibody identification (1)
- Antibody labeling (1)
- Antibody-gated indicator delivery (1)
- Anticancer (1)
- Antifouling surface (1)
- Antigen (1)
- Antigens (1)
- Antimicrobial coating (1)
- Antimicrobial materials (1)
- Antimicrobial surfaces (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimicrobials (1)
- Antimony (1)
- Antiphase boundary (1)
- Apis mellifera (1)
- App (1)
- Application (1)
- Applications (1)
- Approximant (1)
- Aptamere (1)
- Aqdditive manufacturing (1)
- Aquatic fungi (1)
- Aqueous media (1)
- Aqueous quantum dot (1)
- Aqueous synthesis (1)
- Aquifer fluid (1)
- Arabidopsis (1)
- Archaea (1)
- Architecture (1)
- Argon (1)
- Aromatic (1)
- Aromatic aldehydes (1)
- Array (1)
- Arrhenius (1)
- Arrhenius equation (1)
- Arsenite (1)
- Art restauration (1)
- Arthoniomycetes (1)
- Artificial Intelligence (AI) (1)
- Artificial Neural Networks (1)
- Artificial cells (1)
- Artificial neural network modelling (1)
- Artificial potential field (1)
- Artificial weathering (1)
- Arzneistoffe (1)
- As-built LPBF IN718 alloy (1)
- Ash content (1)
- AshDec (1)
- Aspergillus (1)
- Asphalt (1)
- Asymmetric flow filed-flow fractionation (1)
- Asymmetric supercapacitor (1)
- Asymptotic local approach (1)
- Atherosclerotic plaques (1)
- Atmospheric aerosol (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Atom catalysts (1)
- Atomic Absorption Spectrometry (1)
- Atomic Scale (1)
- Atomic absorption spectrometry (1)
- Atomic and molecular physics, and optics (1)
- Atomic force microscope (1)
- Atomic layer deposition (1)
- Attenuation (1)
- Au nanoparticles (1)
- Aufbereitung (1)
- Augenbohne (1)
- Augmented data (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic stainless steel (1)
- Austenitic stainless steels (1)
- Austenitic steel 316L (1)
- Auswaschung (1)
- Autoantibodies (1)
- Automated Bragg angle determination (1)
- Automated Data Evaluation (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated Purification (1)
- Automated analysis (1)
- Automated expansion measurement (1)
- Automated manufacturing (1)
- Automated operational modal analysis (1)
- Automated scanning systems (1)
- Automatic Segmentation (1)
- Automatic segmentation (1)
- Automotive (1)
- Automotive braking (1)
- Automotive engineering (1)
- Automotive industry (1)
- Autophagy (1)
- Aviation (1)
- Axle (1)
- Axle box measurements (1)
- Axle inspection (1)
- Axle sequence (1)
- Ayesian models (1)
- Aza-BODIPY (1)
- Azide-terminated surfaces (1)
- BAM (1)
- BAM SynthCOND (1)
- BAM SynthMAT (1)
- BAM-P109 (1)
- BCA test (1)
- BDP (1)
- BEMMA (1)
- BLEVE (1)
- BODIPY dyes (1)
- BODIPY probe (1)
- BODIPY-Farbstoffe (1)
- BODIPYs (1)
- BOTDA (1)
- BPA removal (1)
- BPF-LB/M (1)
- BSA (1)
- Bacillus subtilis (1)
- Back-side integration (1)
- Background processing (1)
- Backlight (1)
- Backscattered electrons (1)
- Backscattering (1)
- Bacteria detection (1)
- Bacterial adhesion (1)
- Bacterial cell cycle (1)
- Bacterial lipopolysaccharides (1)
- Bacterial lysates (1)
- Bacterial milking (1)
- Bacterial second messenger (1)
- Bags (1)
- Bainitischer Schmiedestahl (1)
- Banana (1)
- Barriers (1)
- Base isolation (1)
- Basic spatial resolution (1)
- Basidiomycetes (1)
- Batch fermentation (1)
- Batch reactions (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Battery (1)
- Battery Safety (1)
- Battery characterization (1)
- Baustoffe (1)
- Baustoffuntersuchungen (1)
- Bauteilauslegung (1)
- Bauwerksüberwachung (1)
- Bawit (1)
- Bayesian Inference (1)
- Bayesian hierachical modelling (1)
- Bayesian technique (1)
- Bayesian updating of stress ranges (1)
- Bead injections (1)
- Bead-on-plate welds (1)
- Beam oscillation (1)
- Bee diseases (1)
- Bee health (1)
- Behavioural mechanisms (1)
- Behmite (1)
- Belastungstest (1)
- Belastungsversuch (1)
- Bell (1)
- Bell pepper (1)
- Bench-scale fire resistance (1)
- Benchmarking study (1)
- Benchtop NMR (1)
- Bending (1)
- Bending mechanism (1)
- Bending modulus (1)
- Bending test (1)
- Beneficial microbes (1)
- Benzene-1,3,5-tricarboxylic acid (1)
- Benzin (1)
- Benzothiadiazole (1)
- Benzoxadiazole dyes (1)
- Berry phase (1)
- Beschichtung (1)
- Bet v 1 (1)
- Beta elimination (1)
- Beta particle (1)
- Betonbeschichtung (1)
- Betonschwellen (1)
- Betriebsfestigkeit (1)
- Betula pendula (1)
- Bewehrung (1)
- Bewertungsverfahren (1)
- Bifunctional 2D nanomaterials (1)
- Bifunctional MgF2 (1)
- Bildqualität (1)
- Bimetallic noble metal nanoparticles (1)
- Binary gas mixture (1)
- Binary zinc alloys (1)
- Binder (1)
- Binder jetting (1)
- Binders (1)
- Binders/binding (1)
- Binding molecule (1)
- Bingham fluid (1)
- Bio active ceramic (1)
- Bio-based concrete (1)
- Bio-based insulation (1)
- Bio-ceramic engineering (1)
- BioSAXS (1)
- Bioaccumulation (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioanalysis (1)
- Biobased (1)
- Biobased polymers (1)
- Biochip (1)
- Biocidal product (1)
- Biocidal products (1)
- Biocide tolerance (1)
- Bioconjugate (1)
- Biocorrosion (1)
- Biodegradable (1)
- Biodegradable implant (1)
- Biodeterioration and biodegradation (1)
- Biodiesel fuel (1)
- Biodosimetry (1)
- Bioeconomy (1)
- Bioengineering (1)
- Bioerosion (1)
- Biofilm formation (1)
- Biofouling (1)
- Biofuel cells (1)
- Biokorrosion (1)
- Biokunststoff (1)
- Biological & biomedical applications (1)
- Biological pest control (1)
- Biological structure (1)
- Biological techniques (1)
- Biologisches Dosimeter (1)
- Biology (1)
- Biomarkers (1)
- Biomass (1)
- Biomedical engineering (1)
- Biomimetic (1)
- Biomimicry (1)
- Biomolecules (1)
- Biopolymer (1)
- Biopolyol (1)
- Bioreceptivity (1)
- Bioresorbable Biomaterials (1)
- Biosensor development (1)
- Biosensoren (1)
- Biosensors (1)
- Bioseparation (1)
- Biosilicification (1)
- Biosynthesis (1)
- Biotic environment (1)
- Biotic weathering (1)
- Biotoxins (1)
- Biozidprodukte (1)
- Biphasic calcium phosphate (1)
- Biphasic growth (1)
- Bipyramid (1)
- Birch pollen allergen (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bismuth Ferrite (1)
- Bismuth titanates (1)
- Bistable fluidic amplifier (1)
- Bituminous binders (1)
- Bituminous material (1)
- Black phosphorus (1)
- Black writing ink (1)
- Blade (1)
- Blattodea (1)
- Blended cement (1)
- Blended learning (1)
- Blends (1)
- Bloch wall (1)
- Block regularization (1)
- Block-sparsity (1)
- Blockcopolymer (1)
- Blue-green algae (1)
- Boden (1)
- Boehmite nanoparticles (1)
- Boltzmann plot (1)
- Bombs (1)
- Bond energy (1)
- Bone grafting (1)
- Bone porosity (1)
- Bone regeneration (1)
- Bone screws (1)
- Bone substitutes (1)
- Bone tissue engineering (1)
- Borate (1)
- Boron compound (1)
- Boron isotope fractionation (1)
- Boron isotopes (1)
- Boron transport (1)
- Borosilicate Glass (1)
- Borosilicatglas (1)
- Borosilikatglas (1)
- Boson peak (1)
- Bound water (1)
- Boundary element (1)
- Bovine serum albumin (1)
- Bovine serum albumin (BSA) (1)
- Bradford (1)
- Bragg angles (1)
- Bragg peak (1)
- Bragg-edge (1)
- Braking-in-a-turn maneuver (1)
- Brass (1)
- Bravais lattices (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Brillouin distributed fiber optic sensors (1)
- Brillouin sensing (1)
- Brinell hardness (1)
- Broadband dielectric microscopy (1)
- Bromination (1)
- Bromoadenine (1)
- Bronsted acidity (1)
- Brown-rot fungi (1)
- Bruchmechanik (1)
- Bubble test (1)
- Buffer (1)
- Building material (1)
- Building response (1)
- Building with earth (1)
- Built environment (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effects (1)
- Bulk temperature (1)
- Bundesanstalt für Materialforschung und -prüfung (1)
- Buried interfaces (1)
- Burning behavior (1)
- Burning behaviour (1)
- Byproducts (1)
- Bystander effect (1)
- C-C coupling (1)
- C-F activation (1)
- C-di-GMP (1)
- C7H15N2O4P (1)
- CALPHAD database analysis (1)
- CCMat (1)
- CCQM (1)
- CE/MC-ICP-MS (1)
- CEA (1)
- CFD (1)
- CFD model (1)
- CFD simulation (1)
- CGHE (1)
- CHC (1)
- CLP-regulation (1)
- CMT welding (1)
- CNTs (1)
- CO2 + n-alkanes (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- CO2-storage (1)
- COK-12 (1)
- COPV (1)
- COST action CA15114 AMICI (1)
- COVID-19 (1)
- CPC calibration (1)
- CPD (1)
- CRISPR/Cas9 (1)
- CRM (1)
- CRP (1)
- CT simulation (1)
- CUINS2 nanocrystals (1)
- CXC (1)
- CaCl emission bands (1)
- Cables (1)
- Cabon capture and storage (1)
- Cadmium (1)
- Caenorhabdtis elegans (1)
- Caffeine (1)
- Calamistrum (1)
- Calcite (1)
- Calcium (1)
- Calcium alkali orthophosphate materials (1)
- Calcium alkali phosphate (1)
- Calcium alkaline orthophosphates (1)
- Calcium carbide method (1)
- Calcium carbonates (1)
- Calcium phosphate (1)
- Calcium phosphate bone cement (1)
- Calcium silicate (1)
- Calcium silicate hydrate (1)
- Calciumfluorid (1)
- Calibrated fluorescence measurements (1)
- Calibration-free analysis (1)
- Caloric effects (1)
- Calorimetry (1)
- Cancer awareness measure (1)
- Cancer cells (1)
- Cancer risk (1)
- Canine olfactometry (1)
- Canny approach (1)
- Cantilever microprobe (1)
- Capacitive methods (1)
- Capillary (1)
- Capillary waves (1)
- Capnodiales (1)
- Carbamazepine (1)
- Carbohydrates (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Nanotubes (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon cycle (1)
- Carbon dioxide emissions (1)
- Carbon dioxide footprint (1)
- Carbon dioxide reduction (1)
- Carbon dots (1)
- Carbon fiber-reinforced polymer (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbon fibre-reinforced plastic (1)
- Carbon fibres (1)
- Carbon ions (1)
- Carbon materials (1)
- Carbon nanodots (1)
- Carbon nanoparticles (1)
- Carbon storage (1)
- Carbon-based nanomaterials (1)
- Carbonate substrate (1)
- Carbonation behaviour (1)
- Cardiac troponin (1)
- Cardiolipins (1)
- Cardiovascular (1)
- Cargo sloshing (1)
- Carrier (1)
- Carrier load (1)
- Carrier-Material (1)
- Carriers (1)
- Cascade impactor (1)
- Casein standard (1)
- Casing (1)
- Cassical nucleation theory (1)
- Casting (1)
- Castings (1)
- Catalogues (1)
- Catalyst layer (1)
- Catalysts (1)
- Categorisation scheme (1)
- Cathode active material (1)
- Cationic photocuring (1)
- Cconventional method (1)
- Ccs (1)
- Cell (1)
- Cell adhesion (1)
- Cell appendages (1)
- Cell culture media (1)
- Cell proliferation (1)
- Cell size (1)
- Cell studies (1)
- Cell-repellent surfaces (1)
- Cellular structures (1)
- Cellular substructure (1)
- Cellulose ether (1)
- Cellulose nanofibrils (1)
- Cellulose synthase (1)
- Cement admixtures (1)
- Cement clinker remnants (1)
- Cement paste (1)
- Cement suspension (1)
- Center of mass (1)
- Central Asia (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Cermet (1)
- Certified reference materials (1)
- Certified reference nanomaterials (1)
- Chaetothyriales (1)
- Chalcopyrite (1)
- Chance-risk analysis (1)
- Channeling-in (1)
- Characterisation (1)
- Characterisation techniques (1)
- Characterization and analytical techniques (1)
- Characterization of corrosion layers (1)
- Charakterisierung (1)
- Charge density (1)
- Charge-to-size-ratio (1)
- Charged dyes (1)
- Charpy impact toughness (1)
- Chelate (1)
- Chemical Biology (1)
- Chemical Process Control (1)
- Chemical Safety (1)
- Chemical admixtures (1)
- Chemical bonds (1)
- Chemical ecology (1)
- Chemical evolution (1)
- Chemical extraction (1)
- Chemical processes (1)
- Chemical protein modification (1)
- Chemical recycling (1)
- Chemical synthesis (1)
- Chemically Complex Materials (1)
- Chemically complex alloy (1)
- Chemicals classification (1)
- Chemiluminescence (1)
- Chemisches Recycling (1)
- Chemo-mechanical coupling (1)
- Chemodosimeter (1)
- Chemometric tools (1)
- Chemometrie (1)
- Chemputer (1)
- Chicken antibodies (1)
- Chicken manure ash (1)
- Chirality (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Chlorine determination (1)
- Chloroanilines (1)
- Chrystal orientation (1)
- Chunky graphite (1)
- Ciaaw.org (1)
- Cimensional Accuracy (1)
- Circular Bio-based Economy (1)
- Circular Economy (1)
- Circularity (1)
- Circumferential weld (1)
- Citation (1)
- Citizen Science (1)
- Citrullinated (1)
- Civil Engineering (1)
- Classical primary measurement method (CPM) (1)
- Clean steel (1)
- Cleaning (1)
- Clearing (1)
- Cleavage (1)
- Cleridae (1)
- Clerodin (1)
- Click Chemistry (1)
- Click chemistry (1)
- Click reaction (1)
- Climate (1)
- Clinical Biochemistry (1)
- Clinoptilolite (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Closed vessel combustion (1)
- Co (1)
- Co-Cr-alloy (1)
- Co-firings (1)
- Co2-Storage (1)
- Coaggregation (1)
- Coastal protection (1)
- Coatings (1)
- Cobaloxime complex (1)
- Cobalt-chromium alloy (1)
- Cockroach (1)
- Cockroaches (1)
- Cocoa (1)
- Coda (1)
- Coda Wave Interferometry (1)
- Codex (1)
- Coefficient of thermal expansion (1)
- Coexpression (1)
- Coherent optical time domain reflectometry (1)
- Cohesive zone (1)
- Coincidence (1)
- Cold cracking (1)
- Cold cracking safety (1)
- Cold to fast neutron testing (1)
- Coleoptera (1)
- Collaborative trial (1)
- Collection (1)
- Colloidal semiconductor nanocrystals (1)
- Colloids (1)
- Color (1)
- Color X-ray camera (1)
- Colour center (1)
- Colouring (1)
- Column holder (1)
- Column percolation (1)
- Columnar crystal growth (1)
- Combinatorial chemistry (1)
- Combinatorial peptide library (1)
- Combined finite-element boundary-element method (1)
- Combined sewer system (1)
- Combined techniques (1)
- Combustion (1)
- Combustion Ion Chromatography (1)
- Combustion and gasification (1)
- Combustion ion chromatography (1)
- Commercial acoustic devices (1)
- Commercial metal-organic frameworks (1)
- Commercialization (1)
- Compact NMR (1)
- Comparative genomics (1)
- Comparative life cycle assessment (1)
- Comparison (1)
- Comparison of detectors (1)
- Compartmentalization (1)
- Compatibility evaluation (1)
- Complementary methodology and metrology (1)
- Complex Molecular Systems (1)
- Complex systems (1)
- Complex-shape (1)
- Complexation (1)
- Complexity (1)
- Component test (1)
- Component-like test (1)
- Components influence (1)
- Components of excitation (1)
- Composite Overwrapped Pressure Vessels (1)
- Composite material (1)
- Composite overwrapped pressure vessels (1)
- Composite panel (1)
- Composite structures (1)
- Composites in fire (1)
- Compositionally complex alloys (1)
- Compost (1)
- Compound semiconductors (1)
- Compound-independent calibration (1)
- Compressed earth (1)
- Compressed sensing (1)
- Compression mechanical (1)
- Compression strength (1)
- Compression stress relaxation (1)
- Compression testing (1)
- Compression tests (1)
- Compressive test (1)
- Computational Materials Science (1)
- Computational fluid dynamics (1)
- Computations (1)
- Computed radiography (CR) (1)
- Computed tomography (CT) (1)
- Computer Science Applications (1)
- Computer Tomography (1)
- Computer vision (1)
- Computertomographie (1)
- Comressed Sensing (1)
- Concentration (1)
- Concentration step (1)
- Concept (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete and screed (1)
- Concrete beam (1)
- Concrete bridges (1)
- Concrete deterioration (1)
- Concrete drying (1)
- Concrete evaluation (1)
- Concrete printing (1)
- Concrete repair (1)
- Concrete specimens (1)
- Concrete structures (1)
- Concrete testing (1)
- Condensate (1)
- Condensation particle counter (CPC) (1)
- Conditioning films (1)
- Conductive carbon tape (1)
- Conductivity (1)
- Cone claorimeter (1)
- Conference (1)
- Confined catalyst (1)
- Confocal raman imaging (1)
- Conformity assessment (1)
- Conformity assessment body (1)
- Conjugate (1)
- Conjugation density (1)
- Conjugation ratio (1)
- Connectivity (1)
- Consequences (1)
- Conservation of wooden artwork (1)
- Constantinomyces (1)
- Construction (1)
- Construction and demolition waste (1)
- Construction product (1)
- Consumer Products (1)
- Consumer products (1)
- Container inspection (1)
- Contaminated soil (1)
- Contaminated soils (1)
- Contamination (1)
- Continuous Processes (1)
- Continuous Sensor (1)
- Continuous culture (1)
- Continuous processes (1)
- Continuous wavelet transform (1)
- Contour scan strategy (1)
- Contraction (1)
- Control strategy (1)
- Controlled morphology (1)
- Controlled periodic illumination (1)
- Conventional isotope ratio (1)
- Conversion (1)
- Converter material (1)
- Convolutional Neural Network (DCNN) (1)
- Convolutional neural networks (1)
- Convolutional neural networks (CNN) (1)
- Coordination (1)
- Coordination chemistry (1)
- Coordination polymer (1)
- Copolymer sequence (1)
- Copolymerization (1)
- Copper Deposition (1)
- Copper sulfide (1)
- Coprecipitation (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptotermes (1)
- Coputed tomography (1)
- Core microbiome (1)
- Core-shell structures (1)
- Core–shell particles (1)
- Corner echo (1)
- Corona (1)
- Corona virus (1)
- Corophium volutator (1)
- Correlative analysis (1)
- Correlative tomography (1)
- Corresponding relative humidity (1)
- Corrosion costs (1)
- Corrosion investigations (1)
- Corrosion mechanism (1)
- Corrosion monitoring (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Corrugated fibreboard box (1)
- Corrugated fibreboard boxes (1)
- Corundum (1)
- Cost benefit analysis (1)
- Counterions (1)
- Coupling (1)
- Covalent Organic frameworks (1)
- Covalent functionalization (1)
- Coverslip seal (1)
- Covid-19 (1)
- Co−N-Cs (1)
- Cr(III) complex (1)
- Crack Detection (1)
- Crack closure effect (1)
- Crack damage detection (1)
- Crack driving force (1)
- Crack healing (1)
- Crack opening displacement (1)
- Crack-tip constraint (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creep behavior (1)
- Creep damage (1)
- Creep mechanisms (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Creep-resisting materials (1)
- Cribellate spiders (1)
- Critical chloride content (1)
- Critical energy release rate (1)
- Critical raw materials (1)
- Critical strain rate (1)
- Cross section (1)
- Cross-feeding (1)
- Cross-resistance (1)
- Cross-sectioning (1)
- Crosshole (1)
- Crosslinking (1)
- Crosslinking density (1)
- Cryo XPS (1)
- Cryoadsorption (1)
- Cryogenic Vessels (1)
- Cryogenic einvironment (1)
- Cryogenic steel (1)
- Cryogenic temperature (1)
- Crystal branch development (1)
- Crystal growth (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Crystalline admixture (1)
- Crystalline cones (1)
- Crystalline defects (1)
- Crystalline phase identification (1)
- Crystallization sequence (1)
- Crystallography (1)
- Crystalstructure (1)
- Cu catalysts (1)
- Cucurbituril (1)
- Cumin discrimination (1)
- Cumulative energy demand (1)
- Cupriavidus campinensis (1)
- Curie temperature (1)
- Curve fitting (1)
- Cuticular hydrocarbons (1)
- Cutting forces (1)
- Cutting tool (1)
- Cuttlefish (1)
- Cyanide in soil (1)
- Cyanotoxins (1)
- Cyber-Physical Systems (1)
- Cyber-physical system (1)
- Cyclic Voltammetry (1)
- Cyclic musk (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cyclic voltammetry (1)
- Cyclic weathering (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- Cyclometalated iridium (III) complexes (1)
- Cylindrical turning (1)
- Cylindrospermopsin (1)
- Cytocompatibility (1)
- Cytop (1)
- Cytoplasm (1)
- C–C coupling (1)
- DAMP (1)
- DAR (1)
- DCB geometry (1)
- DED-EB (1)
- DED-arc (1)
- DFA (1)
- DFT calculations of Raman spectra (1)
- DFT simulations (1)
- DFT spectrum simulations (1)
- DHAP (1)
- DHN melanin (1)
- DIN tube furnace (1)
- DLO (1)
- DLP (1)
- DLS (1)
- DMA (1)
- DMD (1)
- DMDHEU (1)
- DNA Dosimeter (1)
- DNA base damage (1)
- DNA based data storage (1)
- DNA data storage (1)
- DNA degradation (1)
- DNA long term storage (1)
- DNA melting temperature (1)
- DNA origami nanostructures (1)
- DNA polymerase (1)
- DNA protection (1)
- DNA radiosensitizer (1)
- DNA reference material (1)
- DNA stability (1)
- DNA strand breaks (1)
- DNA strand-break (1)
- DNA transfer (1)
- DNA vortexing (1)
- DNPH (1)
- DPA (1)
- DRIFTS (1)
- DSB (1)
- DSM 5009 (1)
- DSS (1)
- DTAB (1)
- DTGS (1)
- DWV (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection systems (1)
- Damage evolution (1)
- Damage localization (1)
- Damage prediction (1)
- Damage tolerance (1)
- Damage-associated molecular patterns (DAMPs) (1)
- Damages (1)
- Dampfdruck (1)
- Damping factor (1)
- Dangerous substance (1)
- Darkfield imaging (1)
- Darkfield microscopy (1)
- Darr method (1)
- Data (1)
- Data Interoperability (1)
- Data Set (1)
- Data correction (1)
- Data curation (1)
- Data driven design (1)
- Data evaluation methods (1)
- Data fitting (1)
- Data infrastructures (1)
- Data integration (1)
- Data mapping (1)
- Data readiness level (1)
- Data-driven material design (1)
- Data-driven materials design (1)
- Data-driven quality assurance (1)
- Data-integration (1)
- Database (1)
- Datenfusion (1)
- Dauerhaftigkeit (1)
- De novo peptide sequencing (1)
- Debinding (1)
- Debonding (1)
- Debonding Mechanism (1)
- Debye scattering equation (1)
- Debye-Waller factor (1)
- Debye-Waller-Faktor (1)
- Decachlorotetrasilane (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Decline (1)
- Deep Convolutional Neural Network (DCNN) (1)
- Deep Discharge (1)
- Deep learning segmentation (1)
- Deep learning-based tools (1)
- Deep penetration laser beam welding (1)
- Defect population (1)
- Defect reconstruction (1)
- Definition (1)
- Degradation of refrigerants (1)
- Degradation studies (1)
- Degradative processes (1)
- Dehydration (1)
- Dehydroxylation (1)
- Delta isotope standard (1)
- Delta value (1)
- Demolition wastes (1)
- Dendrimer (1)
- Dendrimersomes (1)
- Dendritic (1)
- Dendritic polyglycerol (1)
- Denitrification (1)
- Denkmalpflege (1)
- Denoising Deblurring Sharpening (1)
- Density Functional Theory (1)
- Density data (1)
- Density-based Model (1)
- Dental composite materials (1)
- Dental materials (1)
- Dentin (1)
- Dentine (1)
- Depth profile (1)
- Desert ecology (1)
- Desorption (1)
- Detail detection (1)
- Detection of dangerous materials (1)
- Detectors (1)
- Deteriorating structures (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Deviatoric (1)
- Diagnostic Antibodies (1)
- Diastolic dysfunction (1)
- Diatomic molecule (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Dice score (1)
- Dichtheit (1)
- Dichtungen (1)
- Diclofenac (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Dielectric spectroscopy (1)
- Dielectrics (1)
- Diesel (1)
- Diesel Particulate Filter Materials (1)
- Diesel exhaust (1)
- Dietary adaptation (1)
- Difenoconazole (1)
- Different electrochemical conditions (1)
- Different load cases (1)
- Differential expression (1)
- Differential scanning calorimetry (DSC) (1)
- Difficult-to-copy (1)
- Diffraction contrast neutron imaging (1)
- Diffraction elastic constants (1)
- Diffraction peak width (1)
- Diffraction-elastic constants (1)
- Diffractive gratings (1)
- Diffusion/diffusivity (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Diffusivity (1)
- Diffusons (1)
- Digital Detector Array (DDA) (1)
- Digital Image Correlation (1)
- Digital Transformation (1)
- Digital detector array (1)
- Digital detectors (1)
- Digital holographic cytometry (1)
- Digital immunoassay (1)
- Digital industrial radiology (1)
- Digital radiology (1)
- Digital representations (1)
- Digital transformation (1)
- Digital twin (1)
- Digital twins (1)
- Digital volume correlation (1)
- Digital workflows (1)
- Digitale Radiographie (1)
- Digitale Radiologie (1)
- Digitalisierung der Prozessindustrie (1)
- Digitization of process industry (1)
- Dimensional metrology (1)
- Dimer (1)
- Dip-stick assay (1)
- Dipsersive XAS (1)
- Direct damage (1)
- Direct laser deposition (1)
- Direct laser interference patterning (1)
- Direct material input (1)
- Directed energy deposition (1)
- Directional grain growth (1)
- Disbond (1)
- Discontinuities (1)
- Discrete element method (1)
- Disease (1)
- Disinfection Fuel (1)
- Disinfection by-product (1)
- Dislocation (1)
- Dislocation density (1)
- Dislocations (1)
- Disorganized bone (1)
- Disorientation (1)
- Dispersion (1)
- Dispersion of nanomaterials (1)
- Dispersive XAS (1)
- Dispersive-XAS (1)
- Displacement (1)
- Dissimilar joints (1)
- Dissimilar materials (1)
- Dissimilar metal weld (1)
- Dissociative electron attachment (1)
- Dissociative electron attachment (DEA) (1)
- Dissociative electron transfer (DET) (1)
- Distortion upon baseplate removal (1)
- Distributed Acoustic Sensing (1)
- Distributed Fiber Optic Sensor (1)
- Distributed acoustic sensing (DAS) (1)
- Distributed fibre optic sensor (1)
- Distributed sensor (1)
- Distributed temperature gradient sensing (1)
- Distributed vibrations sensing (DVS) (1)
- Distribution of relaxation times analysis (1)
- Disulfides (1)
- Ditigtal image correlation (1)
- Dityrosine crosslinking (1)
- Diversity (1)
- Docking (1)
- Domain Ontology Development (1)
- Domain decomposition methods (1)
- Domain wall (1)
- Double complex compound (1)
- Double complex salts (1)
- Double notched creep specimen (1)
- Double-multilayer monochromators (1)
- Down Stream Processing (1)
- Downburst (1)
- Downhole (1)
- Downstream Processing (1)
- Downstream processing (1)
- Draft Genome (1)
- Drag resistance (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Drinking water (1)
- Driving rain (1)
- Driving style (1)
- Druckstabilität (1)
- Drug Development (1)
- Drug Discovery (1)
- Drug delivery (1)
- Drug discovery (1)
- Drug-to-antibody ratio (1)
- Dry contact transducers in boreholes (1)
- Dry reforming of methane (1)
- Dry treatment (1)
- Drywood termite (1)
- Dual phase steel (1)
- Dual-color labeling glycan (1)
- Dual-energy (1)
- Dual-environment (1)
- Ductile cast iron (1)
- Duplex AISI 2205 (1)
- Duplex stainless steel (1)
- Duplex steels (1)
- Durability assessment (1)
- Durchstrahlungsprüfung (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-time (1)
- DySEM (1)
- Dyad (1)
- Dye loading optimisation (1)
- Dye monomers (1)
- Dye release (1)
- Dye-doped fiber (1)
- Dyes (1)
- Dyes and pigments (1)
- Dyes/pigments (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic calibration gas mixtures (1)
- Dynamic fracture mechanics (1)
- Dynamic light scattering (1)
- Dynamic scanning calorimetry (1)
- Dynamic surface leaching test (1)
- Dynamic test method (1)
- Dünnschichttechnik (1)
- E-aldoximes (1)
- E-nose (1)
- E. coli (1)
- EAF slags (1)
- EBAM (1)
- EC definition of a nanomaterial (1)
- EC nanomaterial definition (1)
- EC/MS (1)
- ECR (1)
- EDS (1)
- EDTAD (1)
- EDX (1)
- EFQM Excellence Modell (1)
- EFTEM (1)
- EN 717-3 (1)
- EN AW-2618A (1)
- EP-3533 (1)
- EPMA (1)
- EPR (1)
- EPREL (1)
- EPS (1)
- ESCA (1)
- ESMA (1)
- ESPR (1)
- EU-CLP (1)
- EU-WFD (1)
- EURAS (1)
- EVA (1)
- Early Earth (1)
- Early oxidation (1)
- Early sulfidation (1)
- Earth block masonry (1)
- Earth material (1)
- Earthen building materials (1)
- Earthquake Monitoring (1)
- Earthquake data (1)
- Earthworms (1)
- Eco-efficiency analysis (1)
- Ecological scarcity method (1)
- Ecotoxicity tests (1)
- Ecotoxixity (1)
- Ectoine DNA protection (1)
- Ectoine UV absorption (1)
- Ectoine excretion (1)
- Ectoine hydration (1)
- Ectoine-DNA binding (1)
- Eddy Current (1)
- Eddy-current testing (1)
- Edge quality (1)
- Effect of scanning strategies (1)
- Effective attenuation coefficient (1)
- Effective gas diffusion coefficient (1)
- Effective irradiation dose 0.2-16 [Gy] (1)
- Efficacy (1)
- Effusivity (1)
- Egress (1)
- Egypt (1)
- Elastic (1)
- Elastic Crystal (1)
- Elastic behavior (1)
- Elastic constants (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elastic reverse time migration (1)
- Elastic waves (1)
- Elastin (1)
- Elastin-specific contrast agent ESMA (1)
- Elastin-specific molecular agent (1)
- Elastodynamic Finite Inegration Technique (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electric conductivity (1)
- Electrical conductivity (1)
- Electrical insulators (1)
- Electrics (1)
- Electro-fused zirconia (1)
- Electrochemical (1)
- Electrochemical CO2 conversion (1)
- Electrochemical behavior (1)
- Electrochemical catalysts (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical permeation (1)
- Electrochemical titration (1)
- Electrochemical treatment (1)
- Electrochromism (1)
- Electrodialysis (1)
- Electrolysis (1)
- Electrolyte membrane (1)
- Electromagnetic backing (1)
- Electromagnetic field (1)
- Electromagnetic forces (1)
- Electromagnetic rectification (1)
- Electromagnetic scattering (1)
- Electromagnetic stirring (1)
- Electromagnetic theories (1)
- Electromagnetic weld pool support system (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron beam welding (1)
- Electron beam-induced charging (1)
- Electron irradiation (1)
- Electron irradiation 30 [kV] (1)
- Electron probe microanalysis (1)
- Electron tomography (1)
- Electron transfer (1)
- Electronic Lab Notebook (ELN) (1)
- Electronic skin (1)
- Electronic structure (1)
- Electrons (1)
- Electroosmosis (1)
- Electrophoresis (1)
- Electrospinning (1)
- Electrospun nanocomposite fiber (1)
- Elektrochemie (1)
- Elektrochemilumineszenz (1)
- Elektrolyse (1)
- Elektronenmikroskopie (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Element mass concentration (1)
- Element transport (1)
- Elemental analyser (1)
- Elementanalyse (1)
- Elevated temperature (1)
- Ellipsometrie (1)
- Eluates (1)
- Embedded Sensors (1)
- Embedded electronics (1)
- Embedded transducers (1)
- Embedded ultrasonic sensors (1)
- Emergence (1)
- Emergency (1)
- Emerging Pollutants (1)
- Emerging infectious disease (1)
- Emission (1)
- Emission Anisotropy (1)
- Emission chamber (1)
- Emission test method (1)
- Emission testing (1)
- Emissionen (1)
- Emissivity (1)
- Emisssivity (1)
- Empirical mode decomposition (1)
- Enamel (1)
- Enantiomeric excess ee (1)
- Encapsulation process (1)
- Encoding (1)
- End crater (1)
- Endocrine disruption (1)
- Endokriner Disruptor (1)
- Endurance Limit (1)
- Endurance limit (1)
- Energetic Materials (1)
- Energy Conversion (1)
- Energy Engineering and Power Technology (1)
- Energy consumption (1)
- Energy discrimination (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy dispersive X-ray spectroscopy (EDX) (1)
- Energy labelling (1)
- Energy materials (1)
- Energy-dispersive x-ray spectroscopy (1)
- Engineered barrier (1)
- Engineered barrier system (1)
- Engineered barrier systems (1)
- Engineering (1)
- Engineering data (1)
- Engineering egress data (1)
- Enhanced Imaging (1)
- Enhancement strategy (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Entropy noise (1)
- Environmental Engineering (1)
- Environmental Science (1)
- Environmental analysis (1)
- Environmental assessment (1)
- Environmental evaluation (1)
- Environmental impact (1)
- Environmental impact categories (1)
- Environmental influence (1)
- Environmental pollutants (1)
- Environmental simulations (1)
- Environmental speciation (1)
- Enzyme (1)
- Enzyme activity (1)
- Enzyme-Linked Immunosorbent Assay (1)
- Epimerization (1)
- Epitaxial thin films (1)
- Epoxies (1)
- Epoxy conversion degree (1)
- Equation of state (1)
- Equilibrium relaxation (1)
- Equivalent circuit (1)
- Ergopeptide (1)
- Ermüdung (1)
- Erosion (1)
- Error correction (1)
- Error sources analysis (1)
- Ersatzbaustoff (1)
- Estimation (1)
- Estrogen (1)
- Estrogen receptor (ER) (1)
- Estrogens (1)
- Etherification (1)
- Ethylene-vinyl acetate (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- Eu (1)
- European Metrology Networks (EMNs) (1)
- European Reference Material (1)
- European funding strategies (1)
- European project (1)
- European regulation (1)
- Eurotiomycetes (1)
- Eutectic (1)
- Evacuation (1)
- Evaporite deposits (1)
- Ex vivo (1)
- Ex-situ (1)
- Ex-situ X-ray computed tomography (1)
- Exchange interaction (1)
- Exchange length (1)
- Excimers (1)
- Excitation (1)
- Excitation forces (1)
- Excited states (1)
- Exergie (1)
- Exhaust (1)
- Existing Concrete Structures (1)
- Existing structure (1)
- Existing structures (1)
- Exocytosis (1)
- Expansion (1)
- Experiment (1)
- Experimental (1)
- Experimental and numerical techniques (1)
- Experimental determination (1)
- Experimental procedure (1)
- Expert system (1)
- Explosion limit (1)
- Explosionsschutz (1)
- Explosive welding (1)
- Explosiven (1)
- Explosives (1)
- Explosives detection (1)
- Exposure (1)
- Exposure modeling (1)
- Extended X-ray absorption fine structure (EXAFS) (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extracellular polymeric substances (1)
- Extractable organic fluorine (1)
- Extractable organically bound fluorine (EOF) (1)
- Extraction (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremotolerance (1)
- F pili (1)
- F-N-diagram (1)
- FAIR Data Management (1)
- FAIR data (1)
- FAIR research data management (1)
- FAIRification (1)
- FAME (1)
- FAT class (1)
- FEFF (1)
- FEM Simulation (1)
- FEM simulation (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FIB patterning (1)
- FIB/SEM slice and view (1)
- FLASH effect (1)
- FMEA (1)
- FSDC (1)
- FT-IR (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Fabrication parameters (1)
- Facade (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Factor analysis (1)
- Failure mechanisms (1)
- False-positive results (1)
- Faraday cup aerosol electrometer (1)
- Farben (1)
- Fast scanning calorimetry (1)
- Fatigue Strength (1)
- Fatigue behavior (1)
- Fatigue crack growth (1)
- Fatigue crack propagation (1)
- Fatigue life (1)
- Fatigue limit (1)
- Fatigue properties (1)
- Fe (1)
- Fe-Ni oxides (1)
- Fe3Al (1)
- FeNi (1)
- Feature selection (1)
- Feedstock powder (1)
- Femtosecond laser patterning (1)
- Femtosecond laser-processing (1)
- Fenton (1)
- Fenton Reaction (1)
- Fenton-like reaction (1)
- Fenton’s reagent (1)
- Fermi resonance (1)
- Ferritic spheroidal graphite cast iron (1)
- Ferritic steels (1)
- Ferritic/martensitic steel (1)
- Ferritic–martensitic steel (1)
- Ferroelectret (1)
- Ferroelectric (1)
- Ferroelectricity/ferroelectric materials (1)
- Ferroic cooling (1)
- Ferromagnetic steel (1)
- Ferrous phosphate hydrate (1)
- Festkörperphysik (1)
- Festschrift (1)
- Fetal bovine serum (1)
- Fiber Bragg grating (1)
- Fiber Bragg gratings (1)
- Fiber characterization (1)
- Fiber optic (1)
- Fiber optic sensing (1)
- Fiber optic sensor (1)
- Fiber structuring (1)
- Fiber toxicology (1)
- Fiber-optic sensing (1)
- Fiber-reinforced concrete (1)
- Fiberoptic sensors (1)
- Fibre bragg grating (1)
- Fibre optic sensors (1)
- Field of view (1)
- Field test (1)
- Filler wire (1)
- Filler wire mixing (1)
- Film thickness (1)
- Filter (1)
- Filter effects (1)
- Filtration (1)
- Finish milling (1)
- Finite Element Method (1)
- Finite element (1)
- Finite element (FE) (1)
- Finite element method (FEM) (1)
- Finite elements (1)
- Finite-element analysis (1)
- Finow Canal (1)
- Fire retardancy (1)
- Fire retardant (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Firing (1)
- First derivative (1)
- Fishmeal (1)
- Fixation (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flange width (1)
- Flash DSC (1)
- Flash thermography (1)
- Flask method (1)
- Flat bottom holes (1)
- Flaw detection (1)
- Flexible (1)
- Flexible Magnetic Sensors (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible waveguide (1)
- Flexible wheelset (1)
- Flexural rigidity (1)
- Floor heating (1)
- Flourescence (1)
- Flourescin (1)
- Flow injection immunoassay (1)
- Flow system (1)
- Flow-through columns (1)
- Fluidic devices (1)
- Fluor-Substitution (1)
- Fluorescein (1)
- Fluorescence Polarization (1)
- Fluorescence label (1)
- Fluorescence life time (1)
- Fluorescence spectroscopy (1)
- Fluorescence standard (1)
- Fluorescent dyes (1)
- Fluorescent markers (1)
- Fluorescent microscopy (1)
- Fluorescent optical fiber (1)
- Fluorescent probes (1)
- Fluorescent sensors (1)
- Fluoride catalyst (1)
- Fluorination (1)
- Fluorine coordination (1)
- Fluoroacetic acid (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorophilic interactions (1)
- Flux balance analysis (1)
- Flying line thermography (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Flüssigwasserstoff (1)
- Foam (1)
- Foams (1)
- Folding chirality (1)
- Food Science (1)
- Food fermentation (1)
- Food safety (1)
- Force-distance-curve (1)
- Forest fires (1)
- Formation (1)
- Formation enthalpy (1)
- Formic acid (1)
- Fourier transform spectroscopy (1)
- Fow injection analysis (1)
- Fractals (1)
- Fractography (1)
- Fracture Mechanics (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Fragility (1)
- Fragmentation (1)
- Fragmentation pathway (1)
- Frameshift (1)
- Free electron laser (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Freezing (1)
- Freilandtest (1)
- Freisetzung (1)
- Frequency Drift (1)
- Frequency domain (1)
- Fresnoite (1)
- Friction braking (1)
- Friction stir welding (1)
- Front-runner (1)
- Frost salt attack (1)
- Fs-inscription (1)
- Fuel (1)
- Fuel Technology (1)
- Fuel cell (1)
- Fuel consumption (1)
- Fuel sorption (1)
- Fuell cells (1)
- Full notch creep test (1)
- Full-field phase tomography (1)
- Fullerene (1)
- Fullerite (1)
- Fully aromatic frameworks (1)
- Functional Materials (1)
- Functional determinants (1)
- Functional fatigue (1)
- Functional group quantification (1)
- Functional monomers (1)
- Functional properties (1)
- Functionality (1)
- Functionalization of fullerenes (1)
- Functionally graded porous structure (1)
- Fungal cell-walls (1)
- Fungicide (1)
- Fungus (1)
- Funtional Groups (1)
- Furan derivatives (1)
- Furniture (1)
- Fusarium (1)
- Fusarium mycotoxin (1)
- Fusion zone size (1)
- Future‑oriented standards (1)
- G quadruplex (1)
- G quadruplexes (1)
- GC-MS (1)
- GC/MS (1)
- GC/MS-MS (1)
- GDL (1)
- GF-MAS (1)
- GMAW (1)
- GNBP-2 (1)
- GPR (1)
- GPS data (1)
- GPU Parallel computing (1)
- GUR (1)
- Gadolinium-based contrast agent (1)
- Gadovist (1)
- Galvanic anodes (1)
- Galvanized steel (1)
- Gamma (1)
- Gamma radiation monitoring (1)
- Gamma ray (1)
- Gamma-hydroxybutyric acid (1)
- Gas adsorption (1)
- Gas calibration (1)
- Gas condensing boiler (1)
- Gas dispersion (1)
- Gas distribution mapping (1)
- Gas emission (1)
- Gas evolution (1)
- Gas flow assisted powder deposition (1)
- Gas sensing (1)
- Gas sorption (1)
- Gas tomography (1)
- Gas transport in porous media (1)
- Gas-sensitive micro-drone (1)
- Gasoline (1)
- Gated materials (1)
- Gd-DOTA (1)
- Gefahrgutverpackungen (1)
- Gefährdungs- und Risikobeurteilung (1)
- Gel-bound Colorants (1)
- Gelartige Elektrolyte (1)
- Gemcitabine (1)
- Gene expression (1)
- Gene five protein (1)
- General Chemical Engineering (1)
- General Computer Science (1)
- General Energy (1)
- General Engineering (1)
- General Environmental Science (1)
- General Physics and Astronomy (1)
- General analytical solutions (1)
- Genetics (1)
- Genome (1)
- Genome annotation (1)
- Genome sequence (1)
- Genome sequencing (1)
- Genomics (1)
- Genotoxicity testing (1)
- Geocomposite drain (1)
- Geoenvironmental engineering (1)
- Geographical origins (1)
- Geogrid (1)
- Geological material (1)
- Geometric Phase (1)
- Geometric deep learning (1)
- Geometric phase (1)
- Geometric phase measurement (1)
- Geometric vehicle and track irregularities (1)
- Geometrical deviation (1)
- Geometrical factors (1)
- Geometrical magnification (1)
- Geopolymers (1)
- Geosciences (1)
- Geotextile (1)
- Geothermal environment (1)
- Gepulste Ramanspektrometer (1)
- Germanium chlorides (1)
- Gesteuerte Freisetzung (1)
- Gesteuerte Materialien (1)
- Gesteuerten Nanopartikeln (1)
- Geteilte Infrastruktur (1)
- Ggadolinium (1)
- Giant magneto resistance (1)
- Giant magneto resistance (GMR) (1)
- Gilding (1)
- Gips (1)
- Github (1)
- Glasmonolith (1)
- Glass Support (1)
- Glass fiber reinforced polymer (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass transition temperature (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Gleeble experiments (1)
- Gleisoberbau (1)
- Global ambient vibrations (1)
- Global hydrogen market (1)
- Global radiation (1)
- Globally harmonized system of classification and labelling of chemicals (1)
- Glycerol (1)
- Glycolide (1)
- Gnomonic projections (1)
- Goal-oriented (1)
- Gold nanocluster (1)
- Gold nanoparticles (1)
- Gold-Katalyse (1)
- Governance (1)
- Grafting (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary engineering (1)
- Grain boundary precipitates (1)
- Grain boundary sliding (1)
- Grain growth (1)
- Grain orientation (1)
- Grain structure (1)
- Granite (1)
- Granules (1)
- Graph databases (1)
- Graph learning (1)
- Graphen Oxide (1)
- Graphene Oxide (1)
- Graphene template (1)
- Graphene-based material (GBM) (1)
- Graphene-based polyglycerol sulfates (1)
- Graphical model (1)
- Graphite (1)
- Graphite furnace (1)
- Graphite induced hysteresis (1)
- Grass pollen (1)
- Grating interferometry (1)
- Grating method (1)
- Gravity response (1)
- Green facades (1)
- Green light excitation (1)
- Green urban construction (1)
- Grignard reaction (1)
- Grignard-Reaktion (1)
- Grinding (1)
- Ground Penetrating Radar (1)
- Ground motion detection (1)
- Ground water (1)
- Groundwater (1)
- Group profile (1)
- Grouts (1)
- Growth rate (1)
- Growth-rate homeostasis (1)
- Guanidinium receptors (1)
- Guided Waves (1)
- Guided waves (1)
- Gurson model (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Gyroid lattice (1)
- H2O2 (1)
- HAZ-softening (1)
- HCF (1)
- HEA (1)
- HERFD-XAS (1)
- HF (1)
- HF free Digestion (1)
- HF-shuttle (1)
- HNBR (1)
- HPLC-DAD/FLD (1)
- HPLC/MS/MS technique (1)
- HPSEC (1)
- HR-CS-MAS (1)
- HTMS (1)
- Hackathon (1)
- Hafnium (1)
- Half-Cell Potential Mapping (1)
- Halloysite nanotubes (1)
- Halogen-free (1)
- Halogenation (1)
- Hammer impact (1)
- Hard Carbon (1)
- Hard X-ray photoelectron spectroscopy (HAXPES) (1)
- Hard metal (1)
- Hard metals (1)
- Hard x-ray photoelectron spectroscopy (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Hardly separable problem (1)
- Harmful algal bloom (1)
- Harmful algal blooms (1)
- Harsh environment (1)
- Hartmann effect (1)
- Hastelloy X (1)
- Hausmüllverbrennungsasche (1)
- Hay fever (1)
- Hazard assessment (1)
- Hazardous chemicals (1)
- Haze Samples (1)
- Hazenite (1)
- Health monitoring (1)
- Healthcare (1)
- Heart attack (1)
- Heat Treatment (1)
- Heat capacity (1)
- Heat flow (1)
- Heat maps (1)
- Heat of combustion (1)
- Heat pump (1)
- Heat release (1)
- Heat source models (1)
- Heat-affected zone (1)
- Heat-transfer Measurements (1)
- Heating oil with 10 % FAME (1)
- Heavy chains (1)
- Heavy gas (1)
- Heavy metal removal (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Hemihydrate (1)
- Hepatocellular carcinoma (1)
- Herbaspirillum seropedicae (1)
- Herpotrichiellaceae (1)
- Heterodyning (1)
- Heusler alloys (1)
- HexaHis-Tag (1)
- Hexachlorodisilane (1)
- Hexagonally-arranged nano-protrusions (1)
- Hi-Tension (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- Hierarchically porous (1)
- High - temperature (1)
- High Cycle Fatigue (1)
- High Entropy Alloys (1)
- High density polyethylene (1)
- High ductility (1)
- High energy beam welding (1)
- High energy radiography (1)
- High heat resistance (1)
- High pH (1)
- High power laser beam welding (1)
- High pressure (1)
- High pressure experiments (1)
- High process speeds (1)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (1)
- High temperature corrosion (1)
- High temperature oxidation (1)
- High temperatures (1)
- High throughput screening (1)
- High voltage cable accessories (1)
- High-Entropy Alloys (1)
- High-Speed (1)
- High-Speed Separations (1)
- High-energy X-ray imaging (1)
- High-entropy alloy (1)
- High-fired gypsum (1)
- High-fired gypsum mortar (1)
- High-frequency arc discharge (1)
- High-precision nail penetration (1)
- High-pressure (1)
- High-pressure hydrogen environment (1)
- High-resolution (1)
- High-resolution continuum source graphite furnace atomic absorption spectrometry (1)
- High-resolution continuum source molecular absorption spectrometry (1)
- High-resolution transmission in SEM (TSEM) (1)
- High-rise building (1)
- High-strength filler metals (1)
- High-strength low-alloy steel (1)
- High-strength steel filler metal (1)
- High-strength steels (1)
- High-temperature ceramics (1)
- High-temperature corrosion (1)
- High-temperature polymer electrolyte membrane fuel cell (1)
- High-voltage testing (1)
- Highly reinforced concrete (1)
- Highspeed (1)
- High‐nitrogen steel (1)
- High‐temperature corrosion (1)
- Hilbert transform (1)
- His6 (1)
- His8 (1)
- Histidine (1)
- Hochfester Stahl (1)
- Hofmeister effect (1)
- Hollow Specimen Technique (1)
- Hollow specimen (1)
- Hollow specimen technique (1)
- Holzschutzmittel (1)
- Homogenization (1)
- Homogenization schemes (1)
- Honeybee (1)
- Honeycombing (1)
- Horizontal wind turbine (1)
- Horizontally polarized shear waves (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host guest molecules (1)
- Hot cracking test (1)
- Hot disc method (1)
- Hot electrons (1)
- Hot isostatic pressing (1)
- Hot pressing (1)
- Hot storage (1)
- Hot tensile test (1)
- Hot working tool steel (1)
- Hot-electrons (1)
- Human Plasma (1)
- Human error (1)
- Human factors (1)
- Human fibroblast growth factors (1)
- Human health (1)
- Human leukocyte antigen (HLA) (1)
- Human papillomavirus (1)
- Human serum albumin (1)
- Humic matter (1)
- Humidity sensing (1)
- Humidity sensor (1)
- Hunting phenomenon (1)
- Hybrid Laser arc Welding (1)
- Hybrid Manufacturing (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hybrid composite pressure vessel (1)
- Hybrid manufacturing (1)
- Hybrid monte carlo (1)
- Hybrid repair (1)
- Hydrated DNA (1)
- Hydrated electron (1)
- Hydrated silicate melts (1)
- Hydration shell (1)
- Hydration stoppage (1)
- Hydrocarbons (1)
- Hydrochemical evolution (1)
- Hydrochloric acid (1)
- Hydrodynamic chromatography (HDC) (1)
- Hydrodynamic model (1)
- Hydrofluorination (1)
- Hydrogarnet (1)
- Hydrogel (1)
- Hydrogen Storage (1)
- Hydrogen Transfer Film (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen bonding (1)
- Hydrogen diffusion (1)
- Hydrogen economy (1)
- Hydrogen measurement (1)
- Hydrogen permeation (1)
- Hydrogen policies (1)
- Hydrogen reduction (1)
- Hydrogen safety (1)
- Hydrogen storage tank (1)
- Hydrogen supply (1)
- Hydrogen uptake reproducibility (1)
- Hydrogen-containing gas mixture (1)
- Hydrogenasen (1)
- Hydrogenated nanostructures (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrometallurgie (1)
- Hydrophilicity (1)
- Hydrophobic interaction chromatography (1)
- Hydrothermal Ageging (1)
- Hydrothermal fluid (1)
- Hydrothermal treatment (1)
- Hydrous glass (1)
- Hydroxy warfarin (1)
- Hydroxylellestadite (1)
- Hygienic behavior (1)
- Hygromycin resistance (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hypermutation (1)
- Hyperthermia (1)
- Hystersis (1)
- I-shape sections (1)
- IAPV (1)
- IBESS (1)
- IBESS Approach (1)
- ICP-MS/MS (1)
- ICP-TOFMS (1)
- ICP-ToF-MS (1)
- ID-MS (1)
- IEPE (1)
- ILC (1)
- IMAC purification (1)
- IN 718 (1)
- IN725 (1)
- INCONEL 718 (1)
- IR (1)
- IR spectroscopy (1)
- IR spectroscopy; conductometry (1)
- IRHD microhardness (1)
- ISO 12108 (1)
- ISO 16000-6 (1)
- ISO 22196 (1)
- ISO 9223 (1)
- ISO REMCO (1)
- ISRU (1)
- Icing conditions (1)
- Identification (1)
- Identification and quantification of additives (1)
- Identity (1)
- IgE (1)
- IgG determination (1)
- IgY (1)
- Ignition (1)
- Ignition sources (1)
- Illite (1)
- Image evaluation (1)
- Image processing (1)
- Image reconstruction (1)
- Image registration (1)
- Image segmentation (1)
- Imaging AES (1)
- Imaging SIMS (1)
- Imaging Technique (1)
- Imaging XPS (1)
- Imaging ellipsometry (1)
- Imaging technique (1)
- Imidazole (1)
- Immersion oil (1)
- Immobilisierung (1)
- Immunassay (1)
- Immunglobulin (1)
- Immunglobuline (1)
- Immunity (1)
- Immunoarray (1)
- Immunoassays (1)
- Immunoglobulin E (1)
- Immunohistochemistry (1)
- Immunology (1)
- Immunometric assay (1)
- Immunometric biosensor (1)
- Immunoprecipitation (1)
- Impact (1)
- Impact Absorbed Energy (1)
- Impact Sensitivity (1)
- Impact damage (1)
- Impact echo (1)
- Impact of standards (1)
- Imperceptible electronics (1)
- Implant material (1)
- Implants (1)
- Imprinting (1)
- Impurites (1)
- In situ EXAFS (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ atomic force microscopy (1)
- In situ studies (1)
- In situ synchrotron x-ray diffraction (1)
- In situ tensile test (1)
- In vivo (1)
- In-air ranging (1)
- In-house calibration solution (1)
- In-line Monitoring (1)
- In-process monitoring (1)
- In-situ ED-XRD (1)
- In-situ SAXS/WAXS (1)
- In-situ SEM micro shear deformation (1)
- In-situ analysis (1)
- In-situ diffraction (1)
- In-situ phase analysis (1)
- In-situ polymerization (1)
- In-situ process monitoring (1)
- In-situ scattering (1)
- In-situ tensile test (1)
- In-situ testing (1)
- Inca (1)
- Inclination angle (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Indenter modulus (1)
- Independent test method (1)
- Indicator displacement assay (1)
- Indicators (1)
- Indirect combustion noise (1)
- Indirect damage (1)
- Individual cell tracking (1)
- Indoor mycobiome (1)
- Induced polarization (1)
- Induction heating (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inductively coupled plasma mass spectroscopy (1)
- Inductively‑coupled mass spectrometry (1)
- Industrial CT (1)
- Industrial application (1)
- Industrial applications (1)
- Industrial gypsum (1)
- Industrial leak testing (1)
- Industrial safety (1)
- Industrie 4.0 (1)
- Inelastic Neutron Scattering Spectroscopy (1)
- Inelastic background (1)
- Inert gases (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infectious diseases (1)
- Information Security (1)
- Information Systems (1)
- Information carrier (1)
- Information security management system (ISMS) (1)
- Infraleichtbeton (1)
- Infrared nano AFM (1)
- Infrastructure monitoring (1)
- Infrastruktur (1)
- Inhibition (1)
- Ink (1)
- Ink corrosion (1)
- Inkjet (1)
- Inline Analytics (1)
- Innovation (1)
- Inorganic arsenic (1)
- Inorganic chemical analysis (1)
- Inorganic impurities (1)
- Insecticide (1)
- Inspection design and planning (1)
- Instantaneous wavenumber analysis (1)
- Institutional theory (1)
- Instrumental isotope fractionation (1)
- Instumented indentation test (1)
- Insulation (1)
- Integrated alignment features (1)
- Intellectual property rights (IPR) (1)
- Intelligent control (1)
- Intelligent tribological material characterization (1)
- Intelligente tribologische Werkstoffcharakterisierung (1)
- Inter-comparison (1)
- Inter-laboratory comparison (1)
- Inter-laboratory test (1)
- Inter-layer time (1)
- Interactions (1)
- Intercomparison (1)
- Interface salt-concrete / rock salt (1)
- Interfaces (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial strength (1)
- Interferometric spectroscopy (1)
- Interferometry (1)
- Intergranular strain (1)
- Interlaboratory comparability (1)
- Interlaboratory study (1)
- Interlaboratory test (1)
- Intermittent microplasticity (1)
- Intermixing (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Internal friction (1)
- Internal standard (1)
- Internal stresses (1)
- Internet of Things (1)
- Interoperability (1)
- Interpenetrating polymer network (1)
- Interphase residual stress (1)
- Interpretable machine learning (1)
- Intra-plant isotope variability (1)
- Intrinsic OER activity (1)
- Intrinsic stress (1)
- Intrinsically conducting polymers (1)
- Intumescent additives (1)
- Intumescent coating (1)
- Invar (1)
- Inverse Design (1)
- Inverse Problem (1)
- Inverse analysis (1)
- Inverse design techniques (1)
- Inverted classroom (1)
- IoT (1)
- Ion beam therapy (1)
- Ion mobility spectrometry (1)
- Ion-exchange membranes (1)
- Ionic Liquid Crystals (1)
- Ionic liquids (1)
- Ionic porosity (1)
- Ionic stregth (1)
- Ionisation (1)
- Ionophore (1)
- Ionophore antibiotics (1)
- Iposomes (1)
- Iridium (1)
- Iridium oxide (1)
- Iron aluminide (1)
- Iron carbide (1)
- Iron gall ink (1)
- Iron nanoparticles (1)
- Iron nanophases (1)
- Iron nitride (1)
- Iron oxides (1)
- Iron reducing bacteria (1)
- Iron scrap (1)
- Iron-oxo oligomers (1)
- Irradiation geometry (1)
- Isothermal nucleic acid amplification (1)
- Isotope Dilution (1)
- Isotope Labelling (1)
- Isotope amount ratio (1)
- Isotope delta value (1)
- Isotope dilution analysis (1)
- Isotope dilution mass spectrometry (1)
- Isotope fractionation (1)
- Isotope mixture (1)
- Isotope reference material (1)
- Isotope-labeled (1)
- Isotopic analysis (1)
- Isotopic fractionation (1)
- Isotopologue Distribution (1)
- Issues (1)
- Iterative method (1)
- Iterative real-time optimization (1)
- Iterative reconstruction (1)
- JMAK model (1)
- Jacobsen-Stockmayer theory (1)
- Jahrestag (1)
- Janus dendrimers (1)
- Jet grout (1)
- Job plot (1)
- Joining dissimilar materials (1)
- Joining technology (1)
- Joint grouts (1)
- K-feldspar (1)
- K-nearest neighbor (1)
- KCl (1)
- Kaolinite (1)
- Kernel average misorientation (1)
- Keyhole collapse (1)
- Keyhole dynamics (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Kikuchi diffraction (1)
- Kinetic study (1)
- Kinetics from experiments (1)
- Kitagawa-Takahashi diagram (1)
- Kjeldahl (1)
- Klassifizierung (1)
- Klimaveränderung (1)
- Knock-out mutant (1)
- Knoevenagel condensation (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge Use (1)
- Knowledge and technology transfer (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Knowledge spillovers (1)
- Knudsen Effusion Mass Spectrometry (KEMS) (1)
- Knudsen diffusion (1)
- Koffein (1)
- Kohäsionsenergie (1)
- Kompost (1)
- Korrosion (1)
- Korynetes caeruleus (1)
- Kosmotrope (1)
- Kramers-Kronig detector (1)
- Kreislaufwirtschaft (1)
- Kumulierter Exergieaufwand (1)
- L-PBF IN718 material (1)
- L-lactide (1)
- LA-ICP-MS based immunoassays (1)
- LA/ICP-MS Imaging (1)
- LBM-DEM (1)
- LC-UV (1)
- LC-UV absorbance (1)
- LC/HRMS (1)
- LC/MS-MS (1)
- LCA (1)
- LCC (1)
- LCF (1)
- LET (1)
- LFIA (1)
- LIBS TIG welding (1)
- LL equation (1)
- LLG (1)
- LMD (1)
- LN2 cooling (1)
- LSFD (1)
- LSVEC (1)
- LTCC (1)
- LTT filler metal (1)
- LTT weld filler materials (1)
- Lab-on-a-Chip (1)
- Lab-to-field up-scaling (1)
- Lab-to-field upscaling (1)
- Laboratory 4.0 (1)
- Laboratory breeding (1)
- Laboratory energy-dispersive X-ray diffraction (EDXRD) (1)
- Laccase (1)
- Lache (1)
- Lack-of-fusion (1)
- Lactide (1)
- Lacunae (1)
- Lacunary Keggin ion (1)
- Ladder sequencing (1)
- Laminar burning velocity (LBV) (1)
- Laminate design (1)
- Laminated metallic composites (1)
- Laminates (1)
- Lamé curves (1)
- Landau Lifshitz Gilbert equation (1)
- Landau Lifshitz equation (1)
- Landau de-Gennes analysis (1)
- Landfill capping system (1)
- Landslide propagation modelling (1)
- Langmuir isotherm (1)
- Lanthanoide (1)
- Large Aperture Ultrasonic System (1)
- Large Language model (1)
- Large components (1)
- Large test fecility (1)
- Large volume samplers (1)
- Large-pore (1)
- Large-scale tests (1)
- Lasalocid (1)
- Laser Ablation (1)
- Laser Ablation ICP-MS (1)
- Laser Doppler Vibrometer (1)
- Laser Infrared thermography (1)
- Laser Machining (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser Processing (1)
- Laser Thermography (1)
- Laser Welding (1)
- Laser ablation ICP-MS (1)
- Laser ablation-inductively coupled plasma-mass spectrometry (1)
- Laser ablation-inductively coupled plasma-mass spectroscopy (1)
- Laser cladding (1)
- Laser cleaning (1)
- Laser cutting (1)
- Laser damage (1)
- Laser direct writing (1)
- Laser energy absorption (1)
- Laser excitation (1)
- Laser implantation (1)
- Laser induced breakdown Spectrocopy (LIBS) (1)
- Laser induced breakdown spectroscopy (1)
- Laser induced plasma (1)
- Laser induced plasma deposition (1)
- Laser powder-based directed energy deposition (1)
- Laser powder-bed fusion (1)
- Laser scanner optics (1)
- Laser scanning (1)
- Laser welding (1)
- Laser-based additive manufacturing (1)
- Laser-induced breakdown spectroscopy (1)
- Laser-induced dielectric breakdown (LIDB) (1)
- Laser-induced fluorescence (1)
- Laser-induced forward transfer (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Laser-induced slip casting (1)
- Laser-metal-deposition (1)
- Laser-modified surface (1)
- Lastwechsel (1)
- Lateral dynamic displacement (1)
- Lateral resolution (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structure (1)
- Laves phase (1)
- Layer-by-Layer (1)
- Layer-by-layer deposition (1)
- Layered manganese oxide (1)
- Layers (1)
- Layerwise Slurry Deposition (1)
- Layerwise slurry deposition (1)
- Leaching of waste materials (1)
- Leaching test (1)
- Lead (1)
- Lead identification (1)
- Lead-free ceramics (1)
- Leak (1)
- Leak detection (1)
- Leak-tightness (1)
- Leakage rate (1)
- Leakproofness (1)
- Leakproofness test (1)
- Leather waste (1)
- Lecture films (1)
- Legacy pollution (1)
- Leichtgranulate (1)
- Lewis Acid (1)
- Lewis superacids (1)
- Lewis/Bronsted (1)
- Li dendrites (1)
- Li dendrites penetration mechanisms (1)
- LiFePO4 (1)
- LiYF4 (1)
- Library (1)
- Library and Information Sciences (1)
- Life cycle (1)
- Life history data (1)
- Life science (1)
- Life-cycle assessment (1)
- Life-cycle costing (1)
- Lifetime encoding (1)
- Lifetime-encoded beads (1)
- Ligand analysis (1)
- Ligandsubstitution (1)
- Light chain (1)
- Light chains (1)
- Light curing (1)
- Light harvesting (1)
- Light-harvesting (1)
- Lightweight structures (1)
- Lignin (1)
- Lignin modification (1)
- Lignocellulose (1)
- Lignosulfonates (1)
- Limestone powder (1)
- Limit of acceptable consequence (1)
- Limited data (1)
- Lindemann criterion (1)
- Linear array (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Linker (1)
- Lipid Nanodiscs (1)
- Lipidomics (1)
- Lipids (1)
- Liquefied Hydrogen (1)
- Liquefied Natural Gas (1)
- Liquefied hydrogen (1)
- Liquefied natural gas (1)
- Liquid Crystal (1)
- Liquid chromatography (1)
- Liquid crystal (1)
- Liquid-liquid-phase-separation (1)
- Liquid-metal embrittlement (1)
- Literature survey (1)
- Lithium Ion Batteries (1)
- Lithium aluminosilicates (1)
- Litium Ion Cells (1)
- Liver X receptor (1)
- Lluminescence (1)
- Load identification (1)
- Load tests (1)
- Load transfer (1)
- Local Weld Geometry (1)
- Local approaches (1)
- Local corrosion (1)
- Local critical strain (1)
- Local fatigue spproaches (1)
- Local resonance (1)
- Local wavenumber analysis (1)
- Localised corrosion (1)
- Localization (1)
- Localized laser dispersing (1)
- Localized model order reduction (1)
- Localized surface plasmon resonance (1)
- Long term monitoring (1)
- Long-term aging (1)
- Long-term requirements (1)
- Longst luminescence lifetime (1)
- Lonic liquid (1)
- Lorentz force (1)
- Lorentz forces (1)
- Loss (1)
- Low Transformation Temperature filler wire (1)
- Low blow (1)
- Low cycle fatigue (1)
- Low transformation temperature filler wire (1)
- Low-carbon construction (1)
- Low-cycle fatigue (1)
- Low-energy electrons (1)
- Low-frequency shaker (1)
- Low-loading (1)
- Luftgüte (1)
- Luftverschmutzung (1)
- Luminescent lifetime (1)
- Lumineszenz (1)
- Luminol (1)
- Lunar regolith (1)
- Lupolen (1)
- Lymnaea stagnalis (1)
- Lysergic acid hydrazide (1)
- Lysosome (1)
- Lysozyme (1)
- L‐PBF (1)
- M-N-C catalysts (1)
- MALDI-TOF MS/MS (1)
- MALDI-TOF-MS (1)
- MATLAB (1)
- MC-TIMS (1)
- MCA-modeling (1)
- MCC (1)
- MCNP (1)
- MCR (1)
- MDCK cell (1)
- MDFEM (1)
- MEA (1)
- MESG (1)
- MICAP-MS (1)
- MIMO (1)
- MIP (1)
- MLCT (1)
- MLI (1)
- MOF´s (1)
- MOSH/MOAH (1)
- MR Angiography (1)
- MR imaging (1)
- MRT (1)
- MST (1)
- MSWI bottom ash (1)
- MVT (1)
- MW-AES (1)
- MWIR (1)
- MYCN (1)
- Maceration (1)
- Machine learning optimization (1)
- Machine learning segmentation (1)
- Machine vision (1)
- Machining (1)
- Macroion/growth factor assemblies (1)
- Macrophage (1)
- Macrophages (1)
- Macropores (1)
- Macroscopic stress (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnesium alloys (1)
- Magnesium carbonates (1)
- Magnesium chloride brine (1)
- Magnesium-gadolinium alloy (1)
- Magnet coupling (1)
- Magnetic (1)
- Magnetic Methods (1)
- Magnetic Nanoparticles (1)
- Magnetic alloys (1)
- Magnetic anisotropy (1)
- Magnetic bath support (1)
- Magnetic domains (1)
- Magnetic field (1)
- Magnetic flux leakage (1)
- Magnetic interacion (1)
- Magnetic iron oxide nanoparticle clusters (1)
- Magnetic materials (1)
- Magnetic moment (1)
- Magnetic nanocatalyst (1)
- Magnetic sensor system (1)
- Magnetic sensors (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetic thin films (1)
- Magnetization dynamics (1)
- Magneto-structural transition (1)
- Magnetocaloric effect (1)
- Magnetocaloric materials (1)
- Magnetoeleastic couplin (1)
- Magnetomechanical effect (1)
- Magnetpartikel (1)
- Magnéli phase (1)
- Major transition (1)
- Management science and operations research (1)
- Management system standards (1)
- Manuscript studies (1)
- Map production and publishing (1)
- Mapping (1)
- Mapping for unseparable load (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marine corrosion (1)
- Market access (1)
- Market surveillance (1)
- Martensite (1)
- Martensitic steels (1)
- Maskinteknik (1)
- Mass contents (1)
- Mass loss (1)
- Mass transport (1)
- Mass-Spectrometry (1)
- Massenspektrometrie (1)
- Matching ferritic filler metal (1)
- Material Acceleration Platforms (MAPs) (1)
- Material Moisture (1)
- Material cassification (1)
- Material chemistry (1)
- Material defects (1)
- Material discrimination (1)
- Material efficiency (1)
- Material engineering (1)
- Material science (1)
- Material sciences (1)
- Material synthesis (1)
- Materials Modelling (1)
- Materials Properties (1)
- Materials Science (1)
- Materials Testing (1)
- Materials analysis (1)
- Materials by design (1)
- Materials chemistry (1)
- Materials database (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix (1)
- Matrix influence (1)
- Matter reorganization theories (1)
- McSAS3 (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Measurement Uncertainty (1)
- Measurement campaigns (1)
- Measurement uncertainties (1)
- Measurements (1)
- Mechanical Load (1)
- Mechanical activation (1)
- Mechanical alloying (1)
- Mechanical analysis (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical characterization (1)
- Mechanical flexibility (1)
- Mechanical loading (1)
- Mechanical mismatching (1)
- Mechanical modelling (1)
- Mechanical response (1)
- Mechanical strength (1)
- Mechanical stress (1)
- Mechanical treatment (1)
- Mechanical waves (1)
- Mechanically flexible crystals (1)
- Mechanicalproperties (1)
- Mechanisms of pathogenesis (1)
- Mechanistic study (1)
- Mechanochemical pictographs (1)
- Mechanochemical synthesis (1)
- Mechanochemically synthesis (1)
- Mechanosensitive channel (1)
- Medical diagnostics (1)
- Medical imaging (1)
- Medicinal application (1)
- Medicine (1)
- Medium entropy alloys (1)
- MefHySto (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melanised microcolonial fungi (MCF) (1)
- Melt dripping (1)
- Melt pool boundary (1)
- Melt pool depth (1)
- Melt pool dynamics (1)
- Melt pool monitoring (1)
- Mercaptans (1)
- Mercury intrusion porosimetry (1)
- Mercury speciation (1)
- Mesh routing (1)
- Meso Portland cement (1)
- Mesocellular foam (1)
- Mesofluidics (1)
- Mesopores (1)
- Mesoporosity (1)
- Mesoporous SiO2-CaO nanoparticles (1)
- Mesoporous Silica (1)
- Mesoporous iridium oxide films (1)
- Mesoporous particles (1)
- Mesoporous phosphate-based glasses (1)
- Mesoporous silica (1)
- Mesoporöse Träger (1)
- Messsysteme (1)
- Messung (1)
- Meta material (1)
- Meta-Omics (1)
- Meta-analysis (1)
- Metabolic Flux (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metabolization (1)
- Metadata (1)
- Metal Matrix Composite (MMC) (1)
- Metal Organic Frameworks (1)
- Metal additive manufacturing (1)
- Metal carbides (1)
- Metal cluster (1)
- Metal halides (1)
- Metal ions (1)
- Metal magnetic memory (1)
- Metal matrix composite (1)
- Metal matrix composite (MMC) (1)
- Metal matrix composites (1)
- Metal mixing (1)
- Metal nanoparticles (1)
- Metal phosphonates (1)
- Metal recovery (1)
- Metal seals (1)
- Metal toxicity (1)
- Metal uptake (1)
- Metal-organic polyhedra (1)
- Metal-oxides (1)
- Metallic Glass (1)
- Metallic materials (1)
- Metallic matrix pad (1)
- Metallo-supramolecular polyelectrolytes (1)
- Metalloprotein (1)
- Metals (1)
- Metals and alloys (1)
- Metal–organic frameworks (1)
- Metal−organic frameworks (1)
- Metamaterials (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Metathesis (1)
- Metformin (1)
- Methane Oxidation (1)
- Methane removal (1)
- Methane total oxidation (1)
- Methanogen (1)
- Methanogene (1)
- Methanogens (1)
- Methanol oxidation (1)
- Methods of scientific analysis (1)
- Methyl group rotation (1)
- Methylanilines (1)
- Methylmercury (1)
- Metoligotoma (1)
- Metrology in chemistry (1)
- Micelle (1)
- Micro X-ray fluorescence spectroscopy (1)
- Micro heat and power generation (1)
- Micro- and nanocapsules (1)
- Micro-CT (1)
- Micro-CT scanning (1)
- Micro-Raman imaging (1)
- Micro-comuted tomography (µCT) (1)
- Micro-concentrator solar cell (1)
- MicroXRF (1)
- Microalloying influences (1)
- Microarray printing (1)
- Microbe (1)
- Microbe interactions (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial simulation, (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbially induced corrosion (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological Corrosion (1)
- Microbiology (1)
- Microchamber (1)
- Microcracks (1)
- Microcystins (1)
- Microencapsulated thermochromic pigments (1)
- Microfabrication (1)
- Microfluidic (1)
- Microfluidic mixing (1)
- Microfluidic system (1)
- Microfocus X-ray computer tomography (μCT) (1)
- Microhardness (1)
- Micromagnetism (1)
- Micromechanical model (1)
- Micromechanical modelling (1)
- Micromechanics (1)
- Micrometeorites (1)
- Micromonospora aurantiaca (1)
- Microorganism (1)
- Micropatterning (1)
- Microplastic analysis (1)
- Microplastic fibers (1)
- Microplastic pathways (1)
- Microplastic pollution (1)
- Microplastic stress (1)
- Microplastic-induced effects (1)
- Microplastics detection (1)
- Microplatic (1)
- Microporous polymers (1)
- Microscope slides (1)
- Microspheres (1)
- Microstrain distribution (1)
- Microstructure evolution (1)
- Microstructured fibers (1)
- Microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) (1)
- Microwave synthesis (1)
- Microwave-assisted synthesis (1)
- Middle Pleistocene (1)
- Mild steels (1)
- Miller and Urey (1)
- Millipedes (1)
- Mineral (1)
- Mineral identification (1)
- Mineral oil hydrocarobons (1)
- Mineral paragenesis (1)
- Minerals (1)
- Miniaturization (1)
- Minimally-invasive parapatellar approach (1)
- Minimum Waiting Time (1)
- Minimum burst pressure (1)
- Minimum energy performance standards (1)
- Mining head gear (1)
- Misalignment of edges (1)
- Misfitting precipitate (1)
- Missing fragmentation sites (1)
- Missing wedge (1)
- Mitigation strategies (1)
- Mix-design (1)
- Mixed Inks (1)
- Mixed conductors (1)
- Mixed metal oxide (1)
- Mixed surface (1)
- Mixed-ligand MOFs (1)
- Mixing procedure (1)
- Mn-oxides (1)
- MoO3 (1)
- MoS2 (1)
- Mobile analytics (1)
- Mobile phase (1)
- Mobile robot olfaction (1)
- Mobiles LIBS (1)
- Mobility particle size spectrometer (MPPS) (1)
- Modal analysis (1)
- Modal parameters (1)
- Model Predictive Control (1)
- Model aerosols (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modellierung (1)
- Modelling studies (1)
- Modern (1)
- Modification of structural morphology (1)
- Modified U-Net architectures (1)
- Modified mycotoxins (1)
- Modifier adaptation (1)
- Moisture content (1)
- Moisture distribution (1)
- Moisture measurements (1)
- Molar extinction coefficient determination (1)
- Molecular Biology (1)
- Molecular MRI (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular identification (1)
- Molecular imprinted polymers (1)
- Molecular marker (1)
- Molecular mass distribution (1)
- Molecular recognition at interfaces (1)
- Molecular sieves (1)
- Molecular spectra (1)
- Molecular-MRI (1)
- Molecule (1)
- Molten pool (1)
- Monensin (1)
- Monitoring strategy (1)
- Monoclonal Antibodies (1)
- Monoclonal Antibody (1)
- Monoclonal antibodies (1)
- Monoklonal (1)
- Monolith (1)
- Monomer (1)
- Monopile support structure (1)
- Monte Carlo algorithm (1)
- Moon (1)
- Morphological image analysis (1)
- Mortar method (1)
- Mounting media (1)
- Mounting medium (1)
- Movement characteristics (1)
- MscS (1)
- Multi photon lithography (1)
- Multi-Offset Array (1)
- Multi-beam track model (1)
- Multi-collector inductively coupled plasma-mass spectrometry (ICP-MS) (1)
- Multi-dimensional reconstruction (1)
- Multi-element analysis (1)
- Multi-energy CT (1)
- Multi-hop (1)
- Multi-materials joining (1)
- Multi-omics (1)
- Multi-phase materials (1)
- Multi-physical modelling (1)
- Multi-principal element alloy (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multi-sample analysis (1)
- Multi-sensor (1)
- Multi-sensor approach (1)
- Multiaxial deformation (1)
- Multicellularity (1)
- Multidimensional technology adoption (1)
- Multifuncitonal material systems (1)
- Multigene phylogeny (1)
- Multilayer Insulation (1)
- Multilayer graphene (1)
- Multilayercoatings (1)
- Multilayers (1)
- Multilaysers (1)
- Multilocus phylogeny (1)
- Multimodal analysis (1)
- Multiple Displacement Amplification (1)
- Multiple principal element alloy (1)
- Multiple reflections (1)
- Multiple sclerosis (1)
- Multiple-injection sample-standard bracketing (1)
- Multiple-layered scaffold (1)
- Multiplexed assay (1)
- Multiport (1)
- Multiscale methods (1)
- Multivalency (1)
- Multivariat (1)
- Multivariate (1)
- Multivariate analyses (1)
- Multivariate evaluation (1)
- Multivariate methods (1)
- Multi‐component diffusion (1)
- Muon (1)
- Murchison meteorite (1)
- Mushrooms (1)
- Mussel-inspired adhesive systems (1)
- Mussel-inspired adhesives (1)
- Mussel-inspired materials (1)
- MySpot (1)
- Mycoplasma (1)
- Mössbauer (1)
- Mössbauer Spectroscopy (1)
- Mössbauer spectroscopy (1)
- Mössbauer study (1)
- Müllverbrennung (1)
- M−N/Cs (1)
- N2-stripping (1)
- NAT (1)
- NDE (1)
- NGS (1)
- NH3-TPD (1)
- NHS (1)
- NHS-Ester (1)
- NIR Spectroscopy (1)
- NIR dyes (1)
- NIR imaging (1)
- NIR-I (1)
- NIR-II fluorescence (1)
- NIST (1)
- NIST-mAb 8671 (1)
- NMC Cathode (1)
- NMF (1)
- NMR Spectroscopy (1)
- NMR-Spektroskopie (1)
- NSE (1)
- NaI (1)
- Nachrechnung (1)
- Nanaoparticle (1)
- Nanaoparticles (1)
- Nano Particles (1)
- Nano particles (1)
- Nano-carrier (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-materials (1)
- Nano-powder (1)
- NanoCAM (1)
- Nanocarrier (1)
- Nanocasting (1)
- Nanocluster (1)
- Nanoconfinement (1)
- Nanocorrosion of aluminium and silicon (1)
- Nanodosimetry (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanofibers (1)
- Nanoinformatics (1)
- Nanolenses (1)
- Nanomaterial analysis (1)
- Nanomaterial categorisation (1)
- Nanomaterial definition (1)
- Nanomaterial design (1)
- Nanomaterial legislation (1)
- Nanomaterial regulation (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanomechanics (1)
- Nanon (1)
- Nanoparticle characterization (1)
- Nanoparticle dimers (1)
- Nanoparticle synthesis (1)
- Nanopatricle (1)
- Nanophotonics (1)
- Nanoplatform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanoporous carbon (1)
- Nanopowder (1)
- Nanopropous materials (1)
- Nanosafety (1)
- Nanosafety (Safe-by-design) (1)
- Nanosciences (1)
- Nanostructure quantification (1)
- Nanostructured FeOx films (1)
- Nanostructured material (1)
- Nanostructuring (1)
- Nanotoxicology (1)
- Nanotribology (1)
- Nanoviscosity (1)
- Nanowear (1)
- Naphthalene (Nap) (1)
- Narrow line method (1)
- Natrium (1)
- Natural (1)
- Natural abundance of 15N (1)
- Natural gas (1)
- Natural products (1)
- Natural products discovery (1)
- Natural rubber (1)
- Natural silver wires (1)
- Natural stones (1)
- Nb3Sn (1)
- NbC (1)
- Near ambient pressure xray photo electron spectroscopy (1)
- Near-field spectroscopy (1)
- Near-infrared refectography (1)
- Near-surface X-ray diffraction (1)
- Neel wall (1)
- Nelson’s method (1)
- Neoallergen (1)
- Neoepitopes (1)
- Net-ionization reaction (1)
- Network (1)
- Network science (1)
- Networking (1)
- Neurons (1)
- Neuropeptide (1)
- Neurotrophins (1)
- Neutral dyes (1)
- Neutron Bragg edge imaging (1)
- Neutron Diffraction (1)
- Neutron Imaging (1)
- Neutron and X-ray diffraction (1)
- Neutron instrument (1)
- Neutron radiology (1)
- Newton Raphson method (1)
- Next generation sequencing (1)
- Ni alloy (1)
- Ni-Mn-Ga (1)
- Ni-based austenitic filler metal (1)
- Nickel alloys (1)
- Nickel chelate (1)
- Nickel nanoparticles (1)
- Nickel-base alloy (1)
- Nile Red (1)
- Nitric acid (1)
- Nitrification (1)
- Nitrobenzene reduction (1)
- Nitrogen fixation (1)
- Nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (1)
- Nitrogen monoxide (1)
- Nitrogen plasma (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Nneutron imaging (1)
- Nobel-metal free electrocatalysis (1)
- Nodularins (1)
- Noise in image (1)
- Nomenclature (1)
- Non Destructive Testing (1)
- Non linear dynamics (1)
- Non-Destructive Evaluation (1)
- Non-classical crystallization (1)
- Non-destructiv testing (1)
- Non-destructive ambient analysis (1)
- Non-destructive evaluation (1)
- Non-destructive testing in civil engineering (1)
- Non-destructive testing of concrete (1)
- Non-destructuive testing (1)
- Non-ferrous metals (1)
- Non-invasive analysis (1)
- Non-invasive scientific methods (1)
- Non-linear Arrhenius behavior (1)
- Non-linear finite element modelling (1)
- Non-metal determination (1)
- Non-negative matrix factorization (1)
- Non-serrated inhomogeneous flow (1)
- Non-spherical nanoparticles (1)
- Non-synoptic wind event (1)
- Non-targeted analysis (1)
- Non-vitriolic iron-gall inks (1)
- Non-weldable superalloy (1)
- Noncovalent interactions (1)
- Nondestructive testing (NDT) (1)
- Nondestructive testing techniques (1)
- Nonlinear Equation of Motion (1)
- Nonlinear Finite Element Formulations (1)
- Nonlinear behavior (1)
- Nonlinear stress-strain curve (1)
- Nonspecific binding (NSB) (1)
- Nosema (1)
- Nosema ceranae (1)
- Notch (1)
- Notch stress approach (1)
- Notches (1)
- Novel metrology (1)
- Nuclear Energy and Engineering (1)
- Nuclear Magnetic Resonance Spectroscopy (1)
- Nuclear power plant (1)
- Nuclear receptor (1)
- Nuclear waste (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Nucleation tendency (1)
- Nucleic acid tests (1)
- Nucleobase (1)
- Nucleocapsid (1)
- Number-weighted median size (1)
- Numerical Simulation (1)
- Numerical analysis (1)
- Numerical inversion (1)
- Numerical investigation (1)
- Numerical models (1)
- Numerical welding simulations (1)
- Nutrient (1)
- Nydrogen melting (1)
- OBOC library (1)
- OECD (1)
- OER (1)
- OH (1)
- OH Radical (1)
- OH radicals (1)
- OH scavenger (1)
- OH-radical (1)
- OMS (1)
- OOMMF (1)
- OTDR (1)
- Oberflächenschutzsystem (1)
- Object oriented micromagnetic framework (1)
- Obstacles (1)
- Ochratoxin A (1)
- Octachlortrisilane (1)
- Oddy test (1)
- Offshore geomechanics (1)
- Offshore steel grade (1)
- Offshore wind turbine (1)
- Oil (1)
- Oil spills (1)
- Oil-based (1)
- Oligomerization (1)
- Oligonucleotides (1)
- On-chip screening (1)
- On-line CE/MC-ICP-MS (1)
- On-site detection (1)
- One-bead-one-compound library (1)
- Online Monitoring (1)
- Online Process Monitoring (1)
- Online biosensor (1)
- Online detection (1)
- Onsite inspection (1)
- Ontologies (1)
- Ontology Engineering (1)
- Open Circuit Voltage (1)
- Open data on zenodo (1)
- Open source (1)
- Operando (1)
- Ophthalmology (1)
- Optical Tomography (1)
- Optical assay (1)
- Optical backscatter reflectometry (1)
- Optical birefringence (1)
- Optical criterion of brittleness (1)
- Optical frequency-domain reflectometry (1)
- Optical imaging (1)
- Optical microphone (1)
- Optical time domain reflectometry (1)
- Optically active surfaces (1)
- Optically excited lock-in thermography (1)
- Optische Konstanten (1)
- Orbitrap (1)
- Orchestration (1)
- Ordered mesoporous carbon (1)
- Ordered/disordered structures (1)
- Organic Solar Cell (1)
- Organic Synthesis (1)
- Organic calibration solution (1)
- Organic compounds (1)
- Organic crystal (1)
- Organic electronics (1)
- Organic osmolytes (1)
- Organic peroxides (1)
- Organic phosphates (1)
- Organic-inorganic hybrid composites (1)
- Organic–inorganic nanostructures (1)
- Organophosphonate (1)
- Oriented immobilization (1)
- Orowan Mechanism (1)
- Ortho-Phthalaldehyde (1)
- Orthotropic steel deck (1)
- Oscillating ball-on-disc test (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- Oscillation (1)
- Osmia bicornis (1)
- Osmolyte (1)
- Osmophobic effect (1)
- Osmotic minipumps (1)
- Osmotic shock (1)
- Osseointegration (1)
- Osteochondral stifle joint defect (1)
- Osteogenesis (1)
- Outburst floods (1)
- Ovalbumin (1)
- Ovariectomy (1)
- Oven drying (1)
- Overhead transmission line (1)
- Oxidative metabolism (1)
- Oxide melts (1)
- Oxyfuel-Verbrennung (1)
- Oxygen Evolution Reaction (1)
- Oxygen Reduction Reaction (1)
- Oxygen isotope ratios (1)
- Oxygen permability (1)
- Oxygen sensitive (1)
- Oxygenation (1)
- Ozon (1)
- P-efficiency (1)
- P. Fluorescens (1)
- PAHs (1)
- PALM (1)
- PBF-LB/M/316L (1)
- PBFLB/M AlSi10Mg alloy (1)
- PBS (1)
- PCCA+ (1)
- PCE (1)
- PCR (1)
- PDT (1)
- PEM-Wasserelektrolyse (1)
- PET (1)
- PGM-free catalyst (1)
- PIC technology (1)
- PLSR (1)
- PM monitors (1)
- POP (1)
- PQQ (1)
- PS (1)
- PSA (1)
- PTFE (1)
- PUR (1)
- PV module (1)
- PVD hard coating (1)
- PVDF-based membrane (1)
- Pacemaker (1)
- Packaging (1)
- Packing density (1)
- Paints (1)
- Pair distribution function (1)
- Pancharatnam–Berry phase (1)
- Pants (1)
- Papyrology (1)
- Parabolic flight (1)
- Paramagnetism (1)
- Parker method (1)
- Partial discharge (1)
- Partial least square discriminant analysis (PLS-DA) (1)
- Partial least squares regression (1)
- Partial penetration (1)
- Partial pore saturation (1)
- Partial safety factor modification (1)
- Particle architecture (1)
- Particle emission (1)
- Particle emissions (1)
- Particle image velocimetry (1)
- Particle motion trajectory (1)
- Particle size analysis (1)
- Particle size and shape distribution (1)
- Particle synthesis (1)
- Particle transfer (1)
- Particle-bed binder jetting (1)
- Partikelmesstechnik (1)
- Passive sampling (1)
- Patch (1)
- Patents (1)
- Path planning (1)
- Path-based analysis (1)
- Pathogen transmission (1)
- Pattern matching (1)
- Pattern recognition receptor (1)
- Pd(II) (1)
- Peak stress method (1)
- Peak stress method (PSM) (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Peer review (1)
- Pentafluorophosphates (1)
- Pepper (1)
- Peptide aptamers (1)
- Peptide binder (1)
- Peptide folding (1)
- Peptide identification (1)
- Peptide mass fingerprinting (1)
- Peptide probe (1)
- Peptide synthesis (1)
- Peptides and Proteins (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Perfluorinated polymer optical fiber (1)
- Perfluorooctanoic Acid (PFOA) (1)
- Performance (1)
- Periodic solidification pattern (1)
- Perlite (1)
- Permeation measurements (1)
- Permethrin (1)
- Peroxidase (1)
- Peroxy-fuels (1)
- Persistence (1)
- Perturbed-Chain Statistical Association Fluid Theory (1)
- Perzyna viscoplasticity (1)
- Pesticide (1)
- Pesticide parathion-methyl (1)
- Pestizid (1)
- Petroleum (1)
- Pflanzenvirus (1)
- Pflanzenwachstum (1)
- Ph (1)
- Pharmaceutical (1)
- Pharmaceutical Science (1)
- Pharmaceuticals (1)
- Pharmacy (1)
- Pharmazeutika (1)
- Phase Imaging (1)
- Phase boundary (1)
- Phase development (1)
- Phase error (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase formation (1)
- Phase shifter (1)
- Phase specific residual stresses (1)
- Phase stability (1)
- Phase transition (1)
- Phase unwrapping (1)
- Phase-Field Simulations (1)
- Phase-field modelling (1)
- Phase-sensitive (1)
- Phase-sensitive optical time-domain reflectometry (1)
- Phased Array (1)
- Phased array (1)
- Phased array technique (1)
- Phase‐field modeling (1)
- Phenanthrene (1)
- Phenothrin (1)
- Phenotypic diversity (1)
- Phenotypic heterogeneity (1)
- Phenylketonuria (1)
- Phl p 5 (1)
- Phleum pratense (1)
- Phonon interactions (1)
- Phospha-Michael addition (1)
- Phosphate (1)
- Phosphate extractability and availability (1)
- Phosphinate (1)
- Phosphinine (1)
- Phospholipids (1)
- Phosphonate (1)
- Phosphor (1)
- Phosphorescence (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Phosphotyrosine Biomimetics (1)
- Phosphous recovery (1)
- Photo counting (1)
- Photoacoustic characterization (1)
- Photocatalytic reduction (1)
- Photocatalytic surfaces (1)
- Photochemistry (1)
- Photodynamic therapy (1)
- Photoelectrochemistry (1)
- Photoinduced Electron Transfer (1)
- Photoinduced electron transfer (1)
- Photoligation (1)
- Photometric P determination (1)
- Photonendichtewellen-Spektroskopie (1)
- Photonic biosensor (1)
- Photonic devices (1)
- Photonic wire (1)
- Photonics (1)
- Photons (1)
- Photopolymer (1)
- Photoreforming (1)
- Photosensitization (1)
- Photostability (1)
- Photostabilität (1)
- Photoswitchable rotaxane (1)
- Photothermal (1)
- Photothermal Technique (1)
- Photothermal super resolution (1)
- Photothermisch (1)
- Photovoltaics (1)
- Physical aging (1)
- Physical hazards (1)
- Physical properties (1)
- Physical relaxation (1)
- Physical twin (1)
- Physico-chemical characterisation of minerals (1)
- Physics and Astronomy (miscellaneous) (1)
- Physics and society (1)
- Physisoprtion (1)
- Phytolith (1)
- Phytoliths (1)
- Piezoelectric transducer (1)
- Piezoresistive (1)
- Piezoresistive cantilever (1)
- Piezoresponse (1)
- Pink beams (1)
- Pipe weld preparation (1)
- Pipeline (1)
- Pipeline integrity (1)
- Pipeline monitoring (1)
- Pipeline network (1)
- Pipeline vibrations (1)
- Plagioclase (1)
- Planck function (1)
- Plant availability (1)
- Plant pathogen (1)
- Plant virus (1)
- Plant-model mismatch (1)
- Plants (1)
- Plasma Polymerization (1)
- Plasma chemistry (1)
- Plasma cutting (1)
- Plasma deposition (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasma-cut samples (1)
- Plasmid DNA (1)
- Plasmid DNA pUC19 (1)
- Plasmonic heating (1)
- Plasmonic nanofocusing (1)
- Plasmonic photocatalysis (1)
- Plastic debris (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Plastic waste recycling (1)
- Plate girders (1)
- Platinum group metals (1)
- Platinum-free catalyst (1)
- Platinum-ruthenium colloid (1)
- Plume (1)
- Polarised light microscopy (1)
- Polarization (1)
- Polishing (1)
- Pollen extract (1)
- Pollinator (1)
- Pollutant (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polybutylensuccinat (PBS) (1)
- Polycaprolactone (1)
- Polychlorosilanes (1)
- Polyclonal Antibodies (1)
- Polycrystal (1)
- Polycrystalline thin films (1)
- Polycyclic aromatic hydrocarbons (1)
- Polydopamine (1)
- Polyelectrolytes (1)
- Polyelektrolyt (1)
- Polyester (1)
- Polyethylene colonization (1)
- Polyethylene glycol (1)
- Polyethylene terephthalate (1)
- Polyimide-coated optical fibers (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer based Nanocomposites (1)
- Polymer blends (1)
- Polymer composite (1)
- Polymer electrolyte fuel cell (1)
- Polymer electrolyte membrane fuel cell (1)
- Polymer encapsulant (1)
- Polymer matrix composites (1)
- Polymer membranes (1)
- Polymer of intrisic microporosity (1)
- Polymer optical fiber POF (1)
- Polymer optical fibers (1)
- Polymer optical fibres (1)
- Polymer particles (1)
- Polymer-based products (1)
- Polymer-ceramic mixtures (1)
- Polymerase mutant (1)
- Polymers and Plastics (1)
- Polymers and plastics (1)
- Polymers of Intrinsic Microporosity (1)
- Polymethyl methacrylate (1)
- Polymorph (1)
- Polyneoptera (1)
- Polynorbornenes (1)
- Polyolefins (1)
- Polyoxometalates (1)
- Polyoxymethylene (1)
- Polyphosphoester (1)
- Polypropylene (1)
- Polysarcosine (1)
- Polystyrene microparticles (1)
- Polyurethan (1)
- Polyurethane foams (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Pore fluids (1)
- Pore pressure (1)
- Pore size distribution (1)
- Pore space characterization (1)
- Pore structure (1)
- Pore volume distribution (1)
- Pores (1)
- Porous building materials (1)
- Porous carbon (1)
- Porous carbons (1)
- Porous media (1)
- Porous rock (1)
- Porphyrin (1)
- Portable (1)
- Portfolio (1)
- Portland clinker (1)
- Position detection (1)
- Position of carboxylate group (1)
- Positron annihilation spectroscopy (1)
- Post-consumer plastic waste (1)
- Posterior fatigue reliability (1)
- Postfluorination (1)
- Pot experiments (1)
- Potash (1)
- Potassium ions (1)
- Potential drop technique (1)
- Potential toxic elements (1)
- Potentiodynamic measurements (1)
- Pouch cell (1)
- Powder X-ray diffraction (1)
- Powder X-ray diffraction (XRD) (1)
- Powder analysis (1)
- Powder bed (1)
- Powder bed density (1)
- Powder bed fusion Laser beam (1)
- Powder diffraction (1)
- Powder diffraction measurements (1)
- Powder metallurgy (1)
- Powder processing (1)
- Powder removal (1)
- Powder-based processes (1)
- Power density (1)
- Power law and power-law breakdown (1)
- Pphosphates (1)
- Pphotophysics (1)
- Ppreheating temperature (1)
- Prebiotic chemistry (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation hardening aluminum alloys (1)
- Precision agriculture (1)
- Precision farming (1)
- Prediction relative (1)
- Predictive maintenance (1)
- Predictive modelling (1)
- Preferential orientation (1)
- Prehydrated electron (1)
- Preprocessing (1)
- Presolvated electron (1)
- Pressure assisted sintering (1)
- Pressure technique (1)
- Pressure-dependent solubility (1)
- Pressure-sensitive adhesive (1)
- Pressure-volume product (1)
- Pressurised liquid extraction (1)
- Prestressed concrete (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Prevention (1)
- Preventive Innovation (1)
- Preventive strategies (1)
- Primary Battery (1)
- Primary difference measurement method (PDM) (1)
- Primary transfer standards (PTSs) (1)
- Primordial soup (1)
- Principal component analysis (1)
- Principal component analysis (PCA) (1)
- Principal stress components (1)
- Principle component analysis (1)
- Printed Electronics (1)
- Printing (1)
- Priority effect (1)
- Probabilistic assessment (1)
- Probabilistic methods (1)
- Probability of damage indication (1)
- Probability of failure (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process (1)
- Process Analytical Tecnology (1)
- Process Control (1)
- Process Monitoring (1)
- Process chain (1)
- Process industry (1)
- Process intelligence (1)
- Process sensors 4.0 (1)
- Process simulation (1)
- Process upscaling (1)
- Product life cycle (1)
- Proficiency test (1)
- Proficiency testing (1)
- Programmed cell death (1)
- Programming (1)
- Progressive catalyst poisoning (1)
- Proinflammatory cytokines (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Proof loading (1)
- Proofreading deficient (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Properties (1)
- Prostheses (1)
- Protection housing (1)
- Protective coatings (1)
- Protein Purification (1)
- Protein Tyrosine Phosphatases (1)
- Protein analysis (1)
- Protein coating (1)
- Protein conjugation (1)
- Protein content (1)
- Protein degradation (1)
- Protein folding (1)
- Protein hydrolysis (1)
- Protein oligomerization (1)
- Protein oligomers (1)
- Protein protection (1)
- Protein quantification (1)
- Protein structure (1)
- Protein test (1)
- Protein-modification (1)
- Proteine microarray (1)
- Proteinoid (1)
- Protemics (1)
- Proteoglycans (1)
- Proteome (1)
- Proteomic analysis (1)
- Protocol development (1)
- Proton exchange membrane fuel cell (1)
- Protoplasts (1)
- Prouess-Sensoren 4.0 (1)
- Provenance (1)
- Provenancing (1)
- Proximal soil sensing (1)
- Proximate analysis (1)
- Proximity-enhanced reaction (1)
- Prozesskontrolle (1)
- Prozesssensoren (1)
- Pseudo-Voigt fit function (1)
- Pseudo-translationalsublattices (1)
- Pseudomonas veronii (1)
- Pseudosymmetry (1)
- Pt catalysts (1)
- Pt(111) (1)
- Pt(II) (1)
- PtNP (1)
- Ptinidae (1)
- Pt–Si layers (1)
- Public Health, Environmental and Occupational Health (1)
- Public funding (1)
- Publications (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Pull-out composite materials (1)
- Pullulan (1)
- Puls-echo method (1)
- Pulse Laser (1)
- Pulse compression (1)
- Pulse-echo method (1)
- Pulsed laser ablation (1)
- Pulsed laser beam welding (1)
- Pulsed magnetic field (1)
- Pulsed thermography (1)
- Pump-probe experiments (1)
- Pure aluminium (1)
- Push and pull effects (1)
- Push-out test (1)
- Pyrolyse (1)
- Pyrolysis (1)
- Pyrometallurgie (1)
- Python (1)
- QI-FoKuS (1)
- QR code carrier (1)
- QUASES (1)
- Quality assurancemechanism (1)
- Quality infrastructure (1)
- Quality monitoring (1)
- Qualitätskontrolle (1)
- Quanten-Kaskadenlaser (1)
- Quantitative Analysis (1)
- Quantitative NMR (1)
- Quantitative NMR-Spektroskopie (1)
- Quantitative determination (1)
- Quantitative moisture measurement (1)
- Quantitative protein analysis (1)
- Quantum Dot (1)
- Quantum Dot Rod (1)
- Quantum Dots (1)
- Quantum Yield (1)
- Quantum chemistry (1)
- Quantum mechanics (1)
- Quartz (1)
- Quartzite rock (1)
- Quasi-direct damage (1)
- Quellungsmessung (1)
- Quenching and partitioning (1)
- Questionnaire (1)
- Quick-XAS (1)
- R package (1)
- R&D (1)
- R-curve (1)
- RAMAN (1)
- RBD (1)
- RBE (1)
- RDF (1)
- REACH regulation (1)
- RED (1)
- REMPI (1)
- RFID based sensors (1)
- RNA (1)
- RNA interference (1)
- RNA virus (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RT (1)
- RXES (1)
- Racemate (1)
- Radiated wavefield (1)
- Radiation (1)
- Radiation-induced attenuation (1)
- Radical (1)
- Radical Scavenge (1)
- Radical Scavenger (1)
- Radioactive waste disposal (1)
- Radiocarbon (1)
- Radiographic procedures (1)
- Radiographic testing (RT) (1)
- Radioprotector ectoine (1)
- Radiotherapy (1)
- Radon (1)
- Rail vibrations (1)
- Railroad (1)
- Railway (1)
- Railway braking forces (1)
- Railway induced vibration (1)
- Railway measurement campaign (1)
- Railway vibration measurements (1)
- Rainwater (1)
- Raman spectra (1)
- Raman-spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Rapid solidification (1)
- Rapid test (1)
- Rapid tests (1)
- Rare earth elements separations (1)
- Rat (1)
- Rat/human liver microsomes (1)
- Ratcheting convective cell (1)
- Ratiometric (1)
- Raw material equivalent (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Rayleigh (1)
- Rayleigh Scattering (1)
- Rayleigh scattering (1)
- Re-entrant surface feature (1)
- Re-hydration (1)
- Reaction Monitoring (1)
- Reaction monitoring (1)
- Reaction-to-small-flame (1)
- Reactive fire protection system (1)
- Reactor conditions (1)
- Reactor control (1)
- Ready-to-use (1)
- Real scale test (1)
- Real time measurement (1)
- Real use behavior (1)
- Real-time imaging (1)
- Real-time infrared spectroscopy (1)
- Real-time quality control (1)
- Rebound hammer (1)
- Recombinant Antibody (1)
- Recombinant antibody (1)
- Recombinant protein (1)
- Recommendations (1)
- Reconstruction calculation (SAFT) (1)
- Recyclable (1)
- Recycled gypsum (1)
- Recycled materials (1)
- Recycled sources (1)
- Recycling fertilizer (1)
- Redox (1)
- Redox switch (1)
- Reduced order models (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reference Materials (1)
- Reference Method (1)
- Reference isotherm (1)
- Reference measurement (1)
- Reference method (1)
- Reference specimen (1)
- Reference standards (1)
- Reference values (1)
- References (1)
- Referenzmaterialien (1)
- Reflectivity (1)
- Refractive index (1)
- Refracto-vibrometry (1)
- Refractory (1)
- Refractory alloy (1)
- Refractory alloys (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regelsetzung (1)
- Regenerator (1)
- Region of interest (1)
- Regolith (1)
- Regulatory identification of nanomaterials (1)
- Reheating (1)
- Reinforcement corrosion (1)
- Reinheitsbestimmung (1)
- Reinigung (1)
- Relative humidity (1)
- Relaxation analysis (1)
- Relaxation fatigue (1)
- Relaxation times (1)
- Reliability assessment (1)
- Remote sensing vibrometer (1)
- Renal disease (1)
- Renewable copolymers (1)
- Renewable resources (1)
- Repair welding (1)
- Repair-welding (1)
- Repelling surface coatings (1)
- Replication (1)
- Replication crisis (1)
- Reporter (1)
- Representative morphology modeling (1)
- Reproducibility crisis (1)
- Requirements (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Research Software (1)
- Research agenda (1)
- Research and innovation (1)
- Research data management (1)
- Residential application (1)
- Residual strains (1)
- Residual stress in AM (1)
- Residual stress state (1)
- Resilience (1)
- Resins (1)
- Resistance (1)
- Resistance stress (1)
- Resistivity (1)
- Resolution (1)
- Resolution criterion (1)
- Resonance (1)
- Resonance frequency (1)
- Resonance wavelength shift (1)
- Resource-based-view (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Reverse Monte Carlo (1)
- Reverse Monte Carlo (RMC) (1)
- Reverse glass painting (1)
- Reverse microemulsion (1)
- Reverse time migration (1)
- Reversible covalent hydrazine chemistry (RCHC) (1)
- Review (1)
- Rhenanite (1)
- Rheometry (1)
- Rheumatoid arthritis (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhodamine (1)
- Rhodamine B (1)
- Rhodiumcomplexes (1)
- Rice (1)
- Rigid (1)
- Rigid amorphous fraction (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Ring resonator (1)
- Ring-opening Polymerisation (1)
- Ripples (1)
- Risk (1)
- Risk asessment (1)
- River (1)
- River water sulfate (1)
- Road inspection (1)
- Road pavement (1)
- Robocasting (1)
- Robustness (1)
- Rock wool (1)
- Rock-art caves (1)
- Rock-inhabiting fungi (1)
- Rohrleitungen (1)
- Roll-to-Roll Processing (1)
- Rolling resistance (1)
- Room fire (1)
- Room-temperature (1)
- Rosamine (1)
- Rosin (1)
- Roughness analysis (1)
- Round Robin (1)
- Round robin test (1)
- Rregulations (1)
- Rround robin test (1)
- Ruthenium (1)
- Ruthenium(II) complexes (1)
- Röntgenbeugung (1)
- Rückverstromung (1)
- S-N curve (1)
- S-Phase (1)
- S-phase (1)
- SA conjugates (1)
- SA508 (1)
- SAMs (1)
- SANS (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SBA-15 (1)
- SBA-16 (1)
- SDC (1)
- SEC (1)
- SEIRA methodology (1)
- SEM micrography (1)
- SERDS (1)
- SHT (1)
- SI Traceability (1)
- SIDA-LC-MS/MS (1)
- SIMS (1)
- SKPFM (1)
- SNR (1)
- SO2 (1)
- SOM-SM (1)
- SPH (1)
- SPR (1)
- SR-microXRF (1)
- STEM-in-SEM (1)
- STXM (1)
- SVOC (1)
- SWIR thermography (1)
- SYBR Gold (1)
- SYBR gold (1)
- Sabatier (1)
- Safe by design (1)
- Safe-by-design (1)
- Safety distances (1)
- Salicylate (1)
- Salicylic acid (1)
- Salinomycin (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sample loss (1)
- Sample piece size (1)
- Sample pretreatment (1)
- Sample random results (1)
- Samples (1)
- Saxitoxins (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale anchor (1)
- Scale conversion (1)
- Scan strategy influence (1)
- Scandium (1)
- Scanning Auger Spectroscopy (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning Probe Microscopy (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning electron microscope (1)
- Scanning laser Doppler vibrometry (1)
- Scanning micro-X-ray fluorescence (1)
- Scanning probe microscopy (1)
- Scanning transmission x- ray microscopy (1)
- Scanning transmission x-ray microscopy (STXM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Schadstoffe (1)
- Schaum (1)
- Schichtdickenmessung (1)
- Schieneninfrastruktur (1)
- Schlangenbohne (1)
- Schlieren Imaging (1)
- Schmiedeteile (1)
- Schnellladung (1)
- Schnelltest (1)
- Schnelltests (1)
- SchwarzP cells (1)
- Scientific publication (1)
- Scientific software (1)
- Scientific workflows (1)
- Scintillator (1)
- Scission (1)
- Screening method (1)
- Screening test (1)
- Scribal corrections (1)
- Seal failure (1)
- Seal force (1)
- Sealing structures (1)
- Seam geometry (1)
- Seasonal energy efficiency ratio (1)
- Seasonal performance factor (1)
- Seawater (1)
- Second-generation high temperature superconductor technology (1)
- Secondary Ion Mass Spectrometry (1)
- Secondary P-fertilizer (1)
- Secondary hazard (1)
- Secondary metabolites (1)
- Security (1)
- Security applications (1)
- Sediment (1)
- Sedimentation (1)
- Sedimentation box (SB) (1)
- Segmentation (1)
- Segmentations (1)
- Segregation (1)
- Segregation Engineering (1)
- Seismic (1)
- Seismic load (1)
- Seismic migration (1)
- Seismic signal reconstruction (1)
- Seismics (1)
- Seismology (1)
- Selected area XPS (1)
- Selective Electron Beam Melting (1)
- Selective Laser Melting (1)
- Selective laser beam melting (1)
- Selective oxidation (1)
- Selektive-laser-melting (1)
- Selenium (1)
- Self assembly (1)
- Self-absorption (1)
- Self-assembled monolayers (1)
- Self-assembled monolayers (SAM) (1)
- Self-assembled structures (1)
- Self-driving-labs (SDLs) (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Semi-metallic brake-pad material (1)
- Semiconductor nanocrystals (1)
- Semiconductor quantum dot (1)
- Semitransparent (1)
- Semivolatile organic compounds (1)
- Sensing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sensor Materials (1)
- Sensor array (1)
- Sensor network (1)
- Sensor planning (1)
- Sensor-based sorting (1)
- Sensors Placement (1)
- Sensory particles (1)
- Separability assumption (1)
- Separability condition (1)
- Separate sewer system (1)
- Separation (1)
- Sequence annotation (1)
- Sequence dependence (1)
- Sequence revision (1)
- Sequencing (1)
- Sequencing algorithm (1)
- Sequential spectroscopic data (1)
- Series production (1)
- Sesistance (1)
- Sets of archaeometric data (1)
- Settling velocity (1)
- Setzmaschine (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sex reversal (1)
- Shadowgraphy (1)
- Shape (1)
- Shape memory alloy (1)
- Shape memory polymer composite (1)
- Shape memory properties (1)
- Shape-memory alloys (1)
- Shared infrastruture (1)
- Shear load (1)
- Shear modulus (1)
- Shear testing (1)
- Shear thinning (1)
- Shearing gratings (1)
- Sheep (1)
- Sheep animal model (1)
- Ship building (1)
- Shipbuilding steel (1)
- Short cracks (1)
- Short-beam strength (1)
- Shotcrete (1)
- SiGe (1)
- Sicherheit (1)
- Sicherheitsbewertung (1)
- Siderite (1)
- Signal Features (1)
- Signal features (1)
- Silanes (1)
- Silica and polystyrene nanoparticles (1)
- Silica coating (1)
- Silica diagenesis (1)
- Silica nanoparticles (1)
- Silicate (1)
- Silicate glass-ceramics (1)
- Silicate glasses (1)
- Silicon chlorides (1)
- Silicon nanowire (1)
- Silicon release (1)
- Silicon stable isotopes (1)
- Silicone elastomer (1)
- Silicone rubber (1)
- Silk (1)
- Silk Road (1)
- Sillver (1)
- Silver (1)
- Silver metallization paste (1)
- Simultaneous temperature and humidity sensing (1)
- Single Cell (1)
- Single asperity (1)
- Single asperity contact (1)
- Single atom catalysts (1)
- Single cell microbiology (1)
- Single crystal Ni-Base superalloys (1)
- Single enhancement (1)
- Single photon and quantum effects (1)
- Single source precursors (1)
- Single-Crystal (1)
- Single-cell analysis (1)
- Single-crystals (1)
- Single-family house energy supply system (1)
- Single-pass welding (1)
- Single-shot XAFS (1)
- Single-sided NMR (1)
- Singlet oxygen (1)
- Sinking velocity (1)
- Sinter retardation (1)
- Sintered Material (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Size exclusion chromatography (1)
- Size measurement (1)
- Size measurements (1)
- Size resolved chemical composition (1)
- Slag (1)
- Slicers (1)
- Sliding (1)
- Sliding wear (1)
- Slip localization (1)
- Slippage of weakly linked layers (1)
- Slope stability (1)
- Slow crack growth (1)
- Slow crack growth (SCG) (1)
- Slurry (1)
- Small angle scattering (1)
- Small molecule detection (1)
- Small-angle X-ray Scattering (1)
- Small-angle neutron scattering (1)
- Small-angle xray scattering (1)
- Small-area XPS (1)
- Small-scale specimens (1)
- Small-spot XPS (1)
- Smart actuators (1)
- Smart label (1)
- Smart materials (1)
- Smart test laboratories (1)
- Smarte Aktoren (1)
- Smarte Sensoren (1)
- Smarter Sensor (1)
- Smartphone readout (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Social (1)
- Social Immunity (1)
- Social acceptance (1)
- Social immunity (1)
- Social insect (1)
- Social insects (1)
- Social sustainability (1)
- Sociality (1)
- Socio-ecological models (1)
- Socio-technical Transition (1)
- Soda lakes (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Sodium Ion Batteries (1)
- Sodium carbonate minerals (1)
- Sodium chloride (1)
- Soft-templated mesoporous films (1)
- Softening temperature (1)
- Software Infrastructure (1)
- Software Licensing (1)
- Software Training (1)
- Software UNIFIT 2022 (1)
- Soil contact (1)
- Soil heterogeneity (1)
- Soil microbial community (1)
- Soil organic matter (1)
- Soil water content (1)
- Soil-building interaction (1)
- Soil-like material (1)
- Sol-Gel-Synthese (1)
- Sol-gel process (1)
- Sol-gel synthesis (1)
- Solar cell (1)
- Solar cells (1)
- Solar concentrator (1)
- Solar energy (1)
- Solid (1)
- Solid acids (1)
- Solid electrolytes (1)
- Solid lubricant (1)
- Solid lubrication (1)
- Solid state (1)
- Solid state NMR spectroscopy (1)
- Solid state cooling (1)
- Solid state emission (1)
- Solid-liquid-extraction (1)
- Solid-phase extraction (SPE) (1)
- Solid-state NMR (1)
- Solidification (1)
- Solitary bees (1)
- Solute excretion (1)
- Solution doping (1)
- Solvent replacement (1)
- Solvent-free (1)
- Solvents (1)
- Solvolyse (1)
- Solvolysis (1)
- Sonden (1)
- Sorghum (1)
- SpICP-MS (1)
- Spannbetonbrücke (1)
- Spannbetonschwelle (1)
- Spannbetonschwellen (1)
- Spatial heterodyne spectrometer (1)
- Special issue (1)
- Specific probe (1)
- Specimen geometry (1)
- Spectoscopic imaging (1)
- Spectral CT (1)
- Spectral elements (1)
- Spectrometer (1)
- Spectrometry (1)
- Spectroscopic Ellipsometry (1)
- Spectroscopic imaging (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Spectrum simulation (1)
- Speed of sound (1)
- Spike protein (1)
- Spill evaporation (1)
- Spin (1)
- Spot-welded joints (1)
- Spray drying (1)
- Sr isotope analysis (1)
- SrF2 (1)
- SrTiO3 (1)
- SsNMR (1)
- Stable crack growth (1)
- Stable isotopes (1)
- Stainless steels (1)
- Staircase method (1)
- Stakeholder (1)
- Standard atomic weight (1)
- Standardization research (1)
- State-of-the-art (1)
- Static axle loads (1)
- Stationäre Phase (1)
- Statistical analysis (1)
- Statistical particle distribution (1)
- Statistical pattern recognition (1)
- Statistics (1)
- Statistics and Probability (1)
- Statistics, Probability and Uncertainty (1)
- Status report (1)
- Steam (1)
- Steel alloy (1)
- Steel and aluminium (1)
- Steel billets (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steel drum (1)
- Steel fiber reinforced concrete (1)
- Steel fiber reiniforced concrete (1)
- Steel weldment (1)
- Steelmaking residues (1)
- Steinergänzungsmassen (1)
- Stepwise growth (1)
- Stereocomplex (1)
- Stereophotogrammetry (1)
- Stern Geary constant (1)
- Stern-Geary-Konstante (1)
- Stickoxide (1)
- Stiffness (1)
- Stiffness variation (1)
- Stochastic Landau Lifshitz Gilbert equation (1)
- Stochastic Landau Lifshitz equation (1)
- Stochastic modeling (1)
- Stochastic sample functions (1)
- Stoichiometric phases (1)
- Stone Age (1)
- Storage Mechanism (1)
- Stored energy (1)
- Stormwater retention tank (1)
- Straight edge method (1)
- Strain (1)
- Strain and temperature measurements (1)
- Strain difference (1)
- Strain fields prediction (1)
- Strain gauge factor (1)
- Strain measurements of wind turbine support structures (1)
- Strain-free lattice references (1)
- Strain-free lattice spacing (1)
- Strand break (1)
- Stranski–Krastanow growth (1)
- Strategic Research Agenda (SRA), (1)
- Strategic alliances (1)
- Strategy and Management (1)
- Stree-strain curve (1)
- Strengthening mechanisms (1)
- Stress (1)
- Stress Coupling (1)
- Stress balance (1)
- Stress balance condition (1)
- Stress conditions (1)
- Stress corrosion tests (1)
- Stress distribution (1)
- Stress reduction (1)
- Stress stiffening (1)
- Stress tolerance (1)
- Stress-protective morphology (1)
- Stress-relief heat-treatments (1)
- Stress-strain behaviour (1)
- Stress-strain relation (1)
- Stressed (1)
- Stretchable electronics (1)
- Stringer (1)
- Strontium isotope (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural Biology (1)
- Structural Materials (1)
- Structural control (1)
- Structural health monitoring (SHM) (1)
- Structural precision (1)
- Structural properties (1)
- Structural relaxation (1)
- Structural reliability (1)
- Structural science (1)
- Structural steel (1)
- Structural stress approach (1)
- Structural system identification (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure factors (1)
- Structure prediction (1)
- Structured cantilever (1)
- Structure–property correlation (1)
- Strukturmonitoring (1)
- Strukturüberwachung (1)
- Strätlingite (1)
- Sub pixel analysis (1)
- Sub-4nm particles (1)
- Sub-aerial biofilms (1)
- Sub-aerial biofilms (SAB) (1)
- Sub-oxide (1)
- Subaerial and subaquatic biofilm (1)
- Subsidence monitoring (1)
- Subsocial (1)
- Substructure failures (1)
- Sugar cane bagasse (1)
- Sulfate attack (1)
- Sulfated materials (1)
- Sulfates (1)
- Sulfide (1)
- Sulfide sensing (1)
- Sulfiding (1)
- Sulfo-NHS (1)
- Sulfur containing polymers (1)
- Sulfur isotopes (1)
- Sulphur (1)
- Sulphur isotope (1)
- Sum Parameter (1)
- Sum Parameter Method (1)
- Sum parameter method (1)
- Sun (1)
- Sunscreen (1)
- Super Resolution (1)
- Super martensitic filler material (1)
- Super martensitic stainless steel (1)
- Superalloy single crystals (1)
- Superalloys (1)
- Superconductivity (1)
- Supercritical CO2 (1)
- Superelasticity (1)
- Superior sorbent (1)
- Superlattice extrinsic stacking faults (1)
- Supermartensitic steel (1)
- Superparamagnetic nanoparticles (1)
- Superparamagnetism (1)
- Supersaturation (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Support vector machine (1)
- Supported catalyst (1)
- Suppression (1)
- Supra molecular polymerization (1)
- Supramolecular Chemistry (1)
- Supramolecules (1)
- Surface Chemistry (1)
- Surface Integrity (1)
- Surface area (1)
- Surface charge (1)
- Surface chemical analysis (1)
- Surface chemisttry (1)
- Surface coating (1)
- Surface conditions (1)
- Surface crystallization (1)
- Surface defects (1)
- Surface elasticity (1)
- Surface interactions (1)
- Surface ligand (1)
- Surface migration barriers (1)
- Surface plasmon polaritons (1)
- Surface preparation (1)
- Surface processing (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface relaxivities (1)
- Surface relaxivity (1)
- Surface roughness analysis (1)
- Surface science (1)
- Surface stress (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface treatment (1)
- Surface treatments (1)
- Surface waters (1)
- Surface wave velocity (1)
- Surface-induced Melting (1)
- Surface-initated grafting (1)
- Surrogate citations (1)
- Suspended particulate matter (SPM) (1)
- Suspension growth (1)
- Sustainability assessment (1)
- Sustainable Production (1)
- Sustainable Software Development (1)
- Sustainable Synthesis (1)
- Sustainable building materials (1)
- Sustainable cement (1)
- Sustainable concrete (1)
- Sustainable construction (1)
- Suzuki coupling (1)
- Suzuki-Miyaura coupling (1)
- Swell-capture (1)
- Swelling (1)
- Swirl (1)
- Symbolic computation (1)
- Synchrotron FTIR (1)
- Synchrotron X-ray CT (1)
- Synchrotron X-ray diffraction (SXRD) (1)
- Synchrotron computed tomography (1)
- Synchrotron measurements (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synchrotron x-ray refraction radiography (SXRR) (1)
- Synthetic Aperture Focusing Technique (1)
- Synthetic aperture focusing technique (1)
- Synthetic aperture focusing technique (SAFT) (1)
- Synthetic metabolism (1)
- System identification (1)
- System method (1)
- Systematics (1)
- Systems biology (1)
- T1 precipitate (1)
- TDLAS (1)
- TEKKEN (1)
- TFA (1)
- TG-FTIR (1)
- TGA (1)
- TGA-FTIR (1)
- TGA-MS (1)
- THP(B) (1)
- TKD (1)
- TLR4 activation (1)
- TOF (1)
- TRIS (1)
- TRL (1)
- TTS (1)
- TTS principle (1)
- TXRF-XAS (1)
- Talbot-Lau (1)
- Tank leaching test (1)
- Tanks (1)
- Tannery industry (1)
- Tantalum oxyfluorides (1)
- Tape casting (1)
- Tapes (1)
- Target (1)
- Tau (1)
- Taxonomy (1)
- Technical crack detection (1)
- Technical lignin (1)
- Temeprature scaling (1)
- Temperature Control (1)
- Temperature and strain monitoring (1)
- Temperature and strain sensing (1)
- Temperature dependence (1)
- Temperature effect (1)
- Temperature effects (1)
- Temperature measurement (1)
- Temperature sensitivity (1)
- Temperature-dependent neutron transmission (1)
- Temperature-memory effect (1)
- Temperature-memory polymer (1)
- Temperature-programmed desorption (1)
- Temple Scroll (1)
- Tensile Strength (1)
- Tensile Test Ontology (1)
- Tensile loading (1)
- Tensile resistance spot welding experiment (1)
- Tensile strength (1)
- Tensile testing (1)
- Tension members (1)
- Terbium (1)
- Terephthalic acid (1)
- Termite-associated microbes (1)
- Ternary (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Test specimen (1)
- Test strip (1)
- Testing (1)
- Testing laboratories (1)
- Testing methods (1)
- Testing procedure (1)
- Tetracyclin (1)
- Tetramethylammonium hydroxide (1)
- Textil (1)
- Textile (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thawing (1)
- Theranostic (1)
- Theranostics (1)
- Therapeutic Antibodies (1)
- Therapy (1)
- Thermal Analysis (1)
- Thermal Cycling (1)
- Thermal Gravimetric Analysis (1)
- Thermal Process Engineering (1)
- Thermal anhydrite (1)
- Thermal annealing (1)
- Thermal cycles (1)
- Thermal decomposition (1)
- Thermal diffusivity (1)
- Thermal effusivity (1)
- Thermal extraction desorption-gas chromatography/mass spectrometry (TED-GC/MS), monitoring (1)
- Thermal runaways (1)
- Thermal stability (1)
- Thermal transient problem (1)
- Thermal transport (1)
- Thermo physical simulation (1)
- Thermo-mechanical testing (1)
- Thermo-mechanics (1)
- Thermoacoustic emitter (1)
- Thermoanalytics (1)
- Thermoanalytik (1)
- Thermobimetal (1)
- Thermochemical treatment (1)
- Thermochemistry (1)
- Thermochromic properties (1)
- Thermocouple (1)
- Thermodynamic analysis (1)
- Thermodynamic simulation (1)
- Thermoelectric properties (1)
- Thermografie (1)
- Thermographie (1)
- Thermography Computed (1)
- Thermomagnetic generator (1)
- Thermomechanical properties (1)
- Thermoresponsive polymers (1)
- Thermoset (1)
- Thermosets (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick shells (1)
- Thick-plate welding (1)
- Thick-walled (1)
- Thickening (1)
- Thickness (1)
- Thickness measurement (1)
- Thickness resonance (1)
- Thin film characterization (1)
- Thin film systems (1)
- Thin magnetic films (1)
- Thin mesoporous films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Thiols (1)
- Thiourea-formaldehyde (1)
- Tholins (1)
- Three-dimensional data quantification (1)
- Three-dimensional tomographies (1)
- Throwing-stick (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- TiO2 (1)
- Tiatanium (1)
- Tiered (1)
- Timber (1)
- Time of flight (1)
- Time resolution (1)
- Time resolved chemical composition (1)
- Time-lapse X-ray computed tomography (1)
- Time-of-flight measurements (1)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved (1)
- Time-resolved scattering (1)
- Tin catalysts (1)
- Tire wear (1)
- Tissue (1)
- Titan-Halterung (1)
- Titania (1)
- Titania nanoparticles (1)
- Titanium dioxide (1)
- Titanium nitride (1)
- Tobermorite (1)
- Toll-like receptor 4 (1)
- Tomographic reconstruction (1)
- Tomography of wood samples (1)
- Tonalide (1)
- Tool comparison (1)
- Tooth wear (1)
- Topas-MC (1)
- Topas-nBio (1)
- Topical collection: Analytical Methods and Applications in the Materials and Life Sciences (1)
- Topography (1)
- Torah scrolls (1)
- Total Quality Management (1)
- Total cyanide (1)
- Total element determination (1)
- Touch surfaces (1)
- Toughening mechanisms (1)
- Toughness (1)
- Toxicity testing (1)
- Toxikologie (1)
- Toys (1)
- Trace Analysis (1)
- Trace elements (1)
- Traceable nanoparticle size measurements; (1)
- Tracer-based sorting (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Track vibration (1)
- Track-soil interaction (1)
- Train passage (1)
- Train tracking (1)
- Train-induced vibration (1)
- Transducers (1)
- Transfer function (1)
- Transferrin (1)
- Transformation induced plasticity (1)
- Transformation induced plasticity (TRIP) (1)
- Transient signal (1)
- Transition metal (1)
- Transition-metal doped (1)
- Transmission (1)
- Transmission Electron Microscopy (TEM) (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microsocpy (1)
- Transmission function IERF (1)
- Transparency (1)
- Transparent ceramic (1)
- Transpassive dissolution (1)
- Transport limitations (1)
- Transport number (1)
- Transportation energy (1)
- Transverse butt weld (1)
- Trapping (1)
- Treated wood (1)
- Treatment (1)
- Trench (1)
- Trends in extreme events (1)
- Trennung (1)
- Tribo-Analytik (1)
- Tribo-analytics (1)
- Tribochemistry (1)
- Tribofilm (1)
- Trilobite compound eyes (1)
- Tripeptides (1)
- Triple UNet (1)
- Triply Periodical Minimal Surface (1)
- Triply periodic minimal surface structures (1)
- Truffle (1)
- Truffle Aroma (1)
- Trust (1)
- Tryptic digest (1)
- Tuber melanosporum (1)
- Tumble dryer (1)
- Tumor radiation therapy (1)
- Tunable antenna (1)
- Tungsten carbide (WC) (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- Turbulence model (1)
- Turbulent Wind Excitation (1)
- Turning maneuvers (1)
- Tutzing Symposion (1)
- Twisted-slit collimator (1)
- Two-dimensional chromatography (2D-LC) (1)
- Two-dimensional solidification (1)
- Two-photon adsorption (1)
- Two-photon-polymerization (1)
- Two-run welding technique (1)
- Type-I pyrethroids (1)
- UAS (1)
- UCST-type copolymer (1)
- UHMWPE (1)
- UHPC (1)
- UN Test O.2 (1)
- UN-GHS (1)
- UPLC-MS/MS (1)
- USAXS (1)
- UV Vis (1)
- UV absorption (1)
- UV irradiation (1)
- UV photons (1)
- UV protection (1)
- UV-A (1)
- UV-B (1)
- UV-C (1)
- UV-Vis (1)
- UV-blocker addition (1)
- UV-irradiation (1)
- UV-spectrometry (1)
- UV/VIS (1)
- UV–Vis spectroscopy (1)
- Ultra high molecular weight polyethylene (1)
- Ultra sound (1)
- Ultra-high performance concrete (1)
- Ultra-short pulse laser processing (1)
- Ultrafast microscopy (1)
- Ultraschall-Echo-Verfahren (1)
- Ultraschallecho-Verfahren (1)
- Ultrasensitive (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Ultrasonic Assisted Machining (1)
- Ultrasonic Guided Waves (1)
- Ultrasonic echo technique (1)
- Ultrasonic imaging of internal reflectors (1)
- Ultrasonic probe (1)
- Ultrasonic reflection measurement (1)
- Ultrasonic test (1)
- Ultrasonic testing (UT) (1)
- Ultrasonic transducer (1)
- Ultrasonics (1)
- Ultrasound concrete (1)
- Ultrasound gel (1)
- Umweltmessung (1)
- Umweltschadstoffe (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- Uncertainties (1)
- Uncertainty Quantification (1)
- Uncertainty estimation (1)
- Underground (1)
- Unfallszenarien (1)
- Unsharpness (1)
- Unstressed (1)
- Upconverion (1)
- Upconverstion (1)
- Uptake studies (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utility and decision theory (1)
- Utility poles (1)
- V-notch impact toughness (1)
- VAMAS (1)
- VE-tongue (1)
- VMAAS (1)
- VO (1)
- VOC emission (1)
- VOC-Emission (1)
- VPDB (1)
- VRFB (1)
- VSSA (1)
- VVOC (1)
- VVOCs (1)
- Vacuum (1)
- Validate method (1)
- Validation trial (1)
- Value of action analysis (1)
- Van der Waals forces (1)
- Vanadium (1)
- Vanadium oxide catalysts (1)
- Varestraint testing (1)
- Variable frequency drive (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vario EL III (1)
- Varroa destructor (1)
- Vascular endothelial growth factor (1)
- Vegetable edible oil (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Velocities (1)
- Venetzungsdichte (1)
- Verbundwerkstoffe (1)
- Verdampfung (1)
- Verdunstung (1)
- Verkehrsinfrastruktur (1)
- Verkehrslasten (1)
- Verteilte faseroptische Sensoren (1)
- Veterinary drugs (1)
- Vibration (1)
- Vibration sensing (1)
- Vibration signal analysis (1)
- Vigna unguiculata (1)
- Virial coefficients (1)
- Virtual CT (1)
- Virtual wave concept (1)
- Virtual waves (1)
- Virucidality (1)
- Virus detection (1)
- Viruses (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vitrimer (1)
- Vitriolic iron-gall inks (1)
- Vivianite (1)
- Vocabulary providers (1)
- Void nucleation & growth (1)
- Volatile organic compound (1)
- Volatile organic compounds; (1)
- Volcano plot (1)
- Voltage Loss (1)
- Volume changes (1)
- Volumetric uptake (1)
- Vor-Ort-Analytik (1)
- Vorticity noise (1)
- Voxel size (1)
- Vulcanization (1)
- WD-XRF (1)
- WRC 1992 diagram (1)
- WSN (1)
- WWTP (1)
- Wall paintings (1)
- Warfarin (1)
- Wasserstoff (1)
- Wasserstoff-Druckbehälter (1)
- Wasserstoff-Qualität (1)
- Wasserstoffspeicher (1)
- Wasserstoffspeicherung (1)
- Waste chracterization (1)
- Waste heat (1)
- Waste heat conversion (1)
- Waste incineration (1)
- Waste water treatment (1)
- Waste-to-energy (1)
- Waste-water (1)
- Wastewater (1)
- Water Diffusion (1)
- Water contact (1)
- Water content (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water in glass (1)
- Water management (1)
- Water permeability (1)
- Water speciation (1)
- Water splitting (1)
- Water stability (1)
- Water structure (1)
- Water transport (1)
- Water treatment (1)
- Water-based (1)
- Wave propagation (1)
- Wavelet (1)
- Wavenumber integrals (1)
- Waxes (1)
- Wear particles (1)
- Weathering tests (1)
- Web mining (1)
- Weibull distribution (1)
- Weld defects (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Weld metal cracking (1)
- Weld pool (1)
- Weld pool support (1)
- Weldability (1)
- Welded Joints (1)
- Welded joint (1)
- Welded joints (1)
- Welding Simulation (1)
- Welding thermal cycle (1)
- Welds (1)
- Weldx (1)
- Werkstoffdatenbank (1)
- Wet soil (1)
- Wetting (1)
- Wheel-rail friction coefficient (1)
- Wheel-rail tangential forces (1)
- Wheelset accelerations (1)
- White light interference microscopy (1)
- White light interferometry (1)
- White light interferometry microscopy (1)
- White-light Interference Microscopy (1)
- White-rot fungi (1)
- Whole water samples (1)
- Whole-chain CCS scenario (1)
- Wide-range (1)
- Widerstandspunktschweißen (1)
- Wild bees (1)
- Wildfire (1)
- Wind turbine rotor blades (1)
- Wind turbine tower (1)
- Windenergie Anlage Rotorblätter (1)
- Windgeschwindigkeit (1)
- Wipe test (1)
- Wire break (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Wood Modification (1)
- Wood chips (1)
- Wood materials (1)
- Wood modification (1)
- Wood samples (1)
- Wooden toys (1)
- Work function (1)
- Work of adhesion (1)
- Workflow (1)
- Workflow management (1)
- Writing materials (1)
- X-Ray (1)
- X-Ray Fluorescence (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray CT (1)
- X-ray Color Camera (1)
- X-ray Computed Tomography (CT) (1)
- X-ray Diffraction (1)
- X-ray Fluorescence (1)
- X-ray Fluorescence analysis (1)
- X-ray absorption Fine Spectroscopy (1)
- X-ray absorption fine structure (1)
- X-ray absorption near-edge structure (1)
- X-ray and Neutron Diffraction (1)
- X-ray and electron diffraction (1)
- X-ray and neutron diffraction (1)
- X-ray computer tomography (1)
- X-ray dark-field radiography (1)
- X-ray diffraction (XRD) (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray fluorescence analysis (1)
- X-ray fuorescence (1)
- X-ray magnetic circular dichroism (XMCD) (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray micro-computed tomography (1)
- X-ray microdiffraction (1)
- X-ray microscopy (1)
- X-ray microtomography (1)
- X-ray optics (1)
- X-ray reflectivity (1)
- X-ray refraction radiography (1)
- X-ray spectrum (1)
- X-ray tomographic (1)
- XAFS (1)
- XANES X-ray absorption near edge structure spectroscopy (1)
- XANES/EXAFS (1)
- XCT Data Conditioning (1)
- XPCS (1)
- XRF imaging (1)
- Xpoxy resin (1)
- Xray (1)
- Xray photo electron spectrocopy (1)
- YES assay (1)
- Yellowness index (1)
- Yerba mate tea (1)
- Yield stress (1)
- Young's modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Ytterbium (1)
- Yttria stabilized zirconia (1)
- ZCF (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zellulose (1)
- Zenodo (1)
- Zeolite (1)
- Zeolites (1)
- Zeolithe (1)
- Zeonex (1)
- Zero wear (1)
- Zerstörungsfreie Prüfung von Schweißnähten (1)
- Zinc catalyst (1)
- Zinc ferrite (1)
- Zinc oxide (1)
- Zinc phosphate (1)
- Zirconia-toughened alumina (1)
- Zirconium (1)
- Znc (1)
- Zustandsbewertung (1)
- Zuverlässigkeitsanalyse (1)
- Zwitterion (1)
- [MMIM]+[DMP]− (1)
- a-zearalenol (1)
- aRTist (1)
- abasic side (1)
- absolute measurements (1)
- absorption (1)
- amorphous carbon film (1)
- amorphous silica film (1)
- atomic weight (1)
- base loss (1)
- bended arrow of time (1)
- bio-diagnostic (1)
- biodegradable material (1)
- biokompatibel (1)
- biomedical applications (1)
- caffeine (1)
- calibration (1)
- carbon black (1)
- coda wave interferometry (1)
- compost (1)
- confocal (1)
- contact resonance (1)
- corrosion (1)
- cross-reactivity (1)
- crystal structures (1)
- dXCT (1)
- dry friction (1)
- dsDAN monolayer (1)
- dsDNA (1)
- dye (1)
- electrochemical dealloying (1)
- electron microscopy (1)
- embedded (1)
- enzyme reactions (1)
- estrogenic activity (1)
- fertilizer (1)
- flexible plastics (1)
- gesintert (1)
- glass fibre paper (1)
- gold nanoparticles (1)
- graphene (1)
- high entropy alloys (1)
- hydrate (1)
- hydrogen storage (1)
- i-TRIBOMAT (1)
- i.S.Sy.Da.T.A. (1)
- iChip (1)
- immunoassay (1)
- in situ template (NaCl) (1)
- infrared Thermography (1)
- injection moulded (1)
- irreproducibility (1)
- isotope reference material (1)
- lN2 (1)
- lank characterization (1)
- layered soil (1)
- ligand binding assay (1)
- mXRF Micro-X-ray fluorescence spectroscopy (1)
- macroporous carbon (1)
- maghemite (1)
- magnetic nanocatalysts (1)
- magnetic saturation (1)
- materials informatics (1)
- mechanochemical synthesis (1)
- mechanochemistry (1)
- melamine (1)
- microspectroscopy (1)
- microstructural changes (1)
- molecular dynamics (1)
- monoclonal antibody (1)
- mortar method (1)
- multilayer graphene (1)
- nanocomposites (1)
- nanotechnology (1)
- neutron diffraction (1)
- non-specific binding (1)
- nutritional supplements (1)
- openBIS (1)
- optimale Überdeckungshöhe (1)
- oxidation (1)
- oxidation state (1)
- oxidative stress (1)
- pH (1)
- pH Indicator (1)
- pH probe (1)
- pUC19 (1)
- pXRF (1)
- paper retraction (1)
- peer reviewimmunochemistry (1)
- phosphorous flame retardant (1)
- photoluminescence (1)
- polyionic liquids (1)
- pore structure (1)
- progressive hepatolenticular degeneration (1)
- protein binding (1)
- proton conductors (1)
- pyrazinamide (1)
- qPCR (1)
- quality control (1)
- replication (1)
- reproducibility crisis (1)
- research landscape (1)
- reversible addition fragmentation chain transfer (RAFT) polymerization (1)
- rubber (1)
- scanning electron microscopy (1)
- selectivity (1)
- self-replication (1)
- sensing (1)
- serine-protease inhibitor (1)
- silica nanoparticles (1)
- silver nanoparticles (1)
- single molecule spectroscopy (1)
- single-molecule analysis (1)
- sliding simulation (1)
- soil (1)
- spICP-MS (1)
- species-specific isotope information (1)
- spectral elements (1)
- spray (1)
- ssNMR spectroscopy (1)
- structural information (1)
- sulfidation (1)
- surface and in-depth inspection (1)
- surface enhanced Raman scattering (1)
- synchrotron X-ray diffraction (1)
- synthesize heteroatom (1)
- tandard addition (1)
- temeprature dependent exchange length (1)
- temperature (1)
- thermal decomposition (1)
- thermophysical properties (1)
- thrombocyte adhesion (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
- titania nanoparticles (1)
- transmission mode (1)
- underexplored phyla (1)
- upconverting nanoparticles (UCNPs) (1)
- µ-gravity (1)
- µCT (1)
- Überdruckverfahren (1)
- α-1,4- and α-1,6-glucans (1)
- β-Lactam (1)
- γ-H2AX assay (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- μCT-analysis (1)
- ‘Green’ pesticide (1)
- “leaky” mutant (1)
Organisationseinheit der BAM
- 6 Materialchemie (428)
- 1 Analytische Chemie; Referenzmaterialien (352)
- 8 Zerstörungsfreie Prüfung (314)
- 9 Komponentensicherheit (202)
- 5 Werkstofftechnik (196)
- 7 Bauwerkssicherheit (181)
- 4 Material und Umwelt (178)
- 6.3 Strukturanalytik (164)
- 8.5 Röntgenbildgebung (119)
- 6.1 Oberflächen- und Dünnschichtanalyse (97)
Paper des Monats
- ja (68)
A novel distributed acoustic sensing technique is proposed that exploits both phase and amplitude of the Rayleigh backscattered light to quantify the environmental variation. The system employs a wavelength-scanning laser and an imbalanced Mach-Zehnder interferometer to acquire the reflection spectra and the phase of the detected light, respectively. Fading-free and low-frequency measurements are realized via the crosscorrelation of the reflection spectra. The discrete crosscorrelation is used to circumvent the nonlinear frequency sweeping of the laser. Based on the phase of the backscattered light, it is possible to quantify fast environmental variations. The whole system requires no hardware modification of the existing system and its functionality is experimentally validated. The proposed system has the potential to monitor ground motion/movement at very low frequency band like subsidence around mining areas and at high frequency band like earthquakes and vibrations induced by avalanches.
A systematic, nature-inspired chemical engineering approach is employed to solve the issue of flooding in electrochemical devices. The mechanism of passive water transport utilized by lizards living in arid environments is leveraged to design flow-fields with a microchannel structure on their surface, through which capillary pressure rapidly removes the water generated in the electrochemical device. This water management strategy is implemented in proton exchange membrane fuel cells (PEMFCs) with a lunginspired flow-field, which ensures uniform distribution of reactants across the catalyst layer. Jointly, this nature-inspired approach results in flood-free, stable operation at 100% RH and a B60% increase in current (B1.9 A cm-2) and peak power density (B650 mW cm−2) compared to current PEMFCs with a flood-prone, serpentine flow-field (B0.8 A cm-2 and 280 mW cm-2, respectively). This significant advance allows for PEMFC operation at fully humidified conditions.
Two-dimensional covalent organic frameworks (COFs) based on phosphinine and thiophene building blocks have been synthesized with two different side groups. The materials are denoted as CPSF-MeO and CPSF-EtO where CxxF correspond to the covalent framework, whereas P and S are related to heteroatoms phosphorous and sulfur. MeO and EtO indicate the substituents, i.e. methoxy and ethoxy.
Their morphologies were studied by scanning electron microcopy and X-ray scattering. The absence of crystalline reflexes in the X-ray pattern reveal that both materials are amorphous and can be considered as glasses. Furthermore, N2 adsorption measurements indicate substantial Brunauer–Emmett–Teller (BET) surface area values pointing to the formation of three-dimensional pores by stacking of the aromatic 2D layer. An analysis of the porosity of both COFs showed a mean radius of the pores to be of ca. 4 nm, consistent with their chemical structure. The COFs form nanoparticles with a radius of around 100 nm. The thermal behavior of the COFs was further investigated by fast scanning calorimetry. These investigations showed that both COFs undergo a glass transition. The glass transition temperature of CPSF-EtO is found to be ca. 100 K higher than that for CPSF-MeO. This large difference in the glass transition is discussed to be due to a change in the interaction of the COF sheets induced by the longer ethoxy group. It might be assumed that for CPSF-EtO more individual COF sheets assemble to larger stacks than for CPSF-MeO. This agrees with the much larger surface area value found for CPSF-EtO compared to CPSF-MeO. To corroborate the results obtained be fast scanning calorimetry dielectric measurements were conducted which confirm the occurrence of a dynamic glass transition. The estimated temperature dependence of the relaxation rates of the dielectric relaxation and their absolute values agrees well with the data obtained by fast scanning calorimetry. Considering the fragility approach to the glass transition, it was further found that CPSF-MeO is a fragile glass former whereas CPSF-EtO behaves as a strong glass forming material. This difference in the fragility points also to distinct differences in the interaction between the 2D COF molecules in both materials.
The Na salt of chloroacetic acid is condensed in suspension. Furthermore,glycolic acid is condensed in bulk or in concentrated solution by means of SnCl2 or 4-toluene sulfonic acid (TSA) as catalysts. The temperatures are varied from 160 to 200°C and the time from 1 to 5 days. Low molar mass cyclic poly(glycolic acid) (PGA) is detected by means of matrix-assisted laser desorption ionization time-of-flight (MALDI TOF) mass spectrometry in most PGAs. A predominance of certain cycles having an even number of repeat units is observed suggesting a thermodynamically favored formation of extended-ring crystals. Extremely high melting temperatures (up to 237.5°C)and high melting enthalpies are found for polycondensations with TSA in 1,2-dichlorobenzene.
Glycolide was polymerized in bulk with two cyclic catalysts − 2,2-dibutyl-2-stanna-1,3-dithiolane (DSTL) and 2-stanna-1,3-dioxa-4,5,6,7-dibenzepane (SnBiph). The monomer/initiator ratio, temperature (140 – 180 °C) and time (1–––4 days) were varied. The MALDI TOF mass spectra exclusively displayed peaks of cyclic polyglycolide (PGA) and revealed an unusual “saw-tooth pattern” in the mass range below m/z 2 500 suggesting formation of extended ring crystallites. The DSC measurements indicated increasing crystallinity with higher temperature and longer time, and after annealing for 4 d at 160 °C a hitherto unknown and unexpected glass transition was found in the temperature range of 170–185 °C. Linear PGAs prepared by means of metal alkoxides under identical conditions did not show the afore-mentioned features of the cyclic PGAs, neither in the mass spectra nor in the DSC measurements. All PGAs were also characterized by SAXS measurements, which revealed relatively small L-values suggesting formation of thin crystallites in all cases with little influence of the reaction conditions.
We report an analytical methodology for the quantification of sulfur in biological molecules via a speciesunspecific postcolumn isotope dilution (online ID) approach using capillary electrophoresis (CE) coupled online with inductively coupled plasma−mass spectrometry (online ID CE/ICP−MS).
The method was optimized using a mixture of standard compounds including sulfate, methionine, cysteine, cystine, and albumin, yielding compound recoveries between 98 and 105%. The quantity of sulfur is further converted to the quantity of the compounds owing to the prior knowledge of the sulfur content in the molecules. The limit of detection and limit of quantification of sulfur in the compounds were 1.3−2.6 and 4.1−8.4 mg L−1, respectively, with a correlation coefficient of 0.99 within the concentration range of sulfur of 5−100 mg L−1. The capability of the method was extended to quantify albumin in its native matrix (i.e., in serum) using experimentally prepared serum spiked with a pure albumin standard for validation. The relative expanded uncertainty of the method for the quantification of albumin was 6.7% (k = 2). Finally, we tested the applicability of the method on real samples by the analysis of albumin in bovine and human sera. For automated data assessment, a software application (IsoCor) which was developed by us in a previous work was developed further for handling of online ID data. The method has several improvements compared to previously published setups: (i) reduced adsorption of proteins onto the capillary wall owing to a special capillary-coating procedure, (ii) baseline separation of the compounds in less than 30 min via CE, (iii) quantification of several sulfur species within one run by means of the online setup, (iv) SI traceability of the quantification results through online ID, and (v) facilitated data processing of the transient signals using the IsoCor application. Our method can be used as an accurate approach for quantification of proteins and other biological molecules via sulfur analysis in complex matrices for various fields, such as environmental, biological, and pharmaceutical studies as well as clinical diagnosis.
Sulfur is an essential element in living organisms, where it plays important roles in various biological processes, such as protein synthesis, enzyme activity, and antioxidant defense. However, the biological effects of different sulfur species can vary widely, and imbalances in sulfur speciation have been observed in a range of diseases, including cancer, Alzheimer’s disease, and diabetes.1−3 The accurate quantification of sulfur and its species in biological samples requires sensitive and selective analytical techniques. In recent years, separation techniques coupled online with inductively coupled plasma−mass spectrometry (ICP−MS) have emerged as powerful online analytical tools complementary to molecular spectrometric methods for speciation analysis of biological compounds.
External calibration4−9 and isotope dilution (ID)10−15 are common calibration approaches applied for online quantification of sulfur species in complex samples. The ID analysis is advantageous over.
The Large Aperture Ultrasound System (LAUS) developed at BAM is known for its ability to penetrate thick objects, especially concrete structures commonly used in nuclear waste storage and other applications in civil engineering. Although the current system effectively penetrates up to ~9 m, further optimization is imperative to enhance the safety and integrity of disposal structures for radioactive or toxic waste. This study focuses on enhancing the system’s efficiency by optimizing the transducer spacing, ensuring that resolution is not compromised. An array of twelve horizontal shear wave transducers was used to find a balance between penetration depth and resolution. Systematic adjustments of the spacing between transmitter and receiver units were undertaken based on target depth ranges of known reflectors at depth ranges from 5 m to 10 m. The trade-offs between resolution and artifact generation were meticulously assessed. This comprehensive study employs a dual approach using both simulations and measurements to investigate the performance of transducer units spaced at 10 cm, 20 cm, 30 cm, and 40 cm. We found that for depths up to 5 m, a spacing of 10 cm for LAUS transducer units provided the best resolution as confirmed by both simulations and measurements. This optimal distance is particularly effective in achieving clear reflections and a satisfactory signal-to-noise ratio (SNR) in imaging scenarios with materials such as thick concrete structures. However, when targeting depths greater than 10 m, we recommend increasing the distance between the transducers to 20 cm. This increased spacing improves the SNR in comparison to other spacings, as seen in the simulation of a 10 m deep backwall. Our results emphasize the critical role of transducer spacing in achieving the desired SNR and resolution, especially in the context of depth imaging requirements for LAUS applications. In addition to the transducer spacing, different distances between individual sets of measurement positions were tested. Overall, keeping the minimal possible distance between measurement position offsets provides the best imaging results at greater depths. The proposed optimizations for the LAUS in this study are primarily relevant to applications on massive nuclear structures for nuclear waste management. This research highlights the need for better LAUS efficiency in applications such as sealing structures, laying the foundation for future technological advances in this field.
Glycolide was polymerized in bulk by means of four different ROPPOC catalysts: tin(II) 2-ethylhexanoate (SnOct2), dibutyltin bis(pentafluoro-phenoxide) (BuSnOPF),zinc biscaproate (ZnCap), and zinc bis(pentafluoro-phenyl sulfide) (ZnSPF). The temperature was varied between 110 and 180°C and the time between 3 h and 7 days. For the few polyglycolides (PGAs) that were soluble extremely high molecular masses were obtained. The MALDI TOF mass spectra had all a low signal-to-noise ration and displayed the peaks of cyclic PGAs with a“saw-tooth pattern ”indicating formation of extended-ring crystallites in the mass range below m/z 2500. The shape of DSC curves varied considerably with catalyst and reaction conditions, whereas the long-distance values measured by SAXS were small and varied little with the polymeriza-tion conditions.
Plastic pollution is the biggest environmental concern of our time. Breakdown products like micro- and nanoplastics inevitably enter the food chain and pose unprecedented health risks. In this scenario, bio-based and biodegradable plastic alternatives have been given a momentum aiming to bridge a transition towards a more sustainable future. Polyhydroxyalkanoates (PHAs) are one of the few thermoplastic polymers synthesized 100 % via biotechnological routes which fully biodegrade in common natural environments. Poly(hydroxybutyrate-cohydroxyhexanoate) [P(HB-co-HHx)] is a PHA copolymer with great potential for the commodity polymers industry, as its mechanical properties can be tailored through fine-tuning of its molar HHx content. We have recently developed a strategy that enables for reliable tailoring of the monomer content of P(HB-co-HHx).
Nevertheless, there is often a lack of comprehensive investigation of the material properties of PHAs to evaluate whether they actually mimic the functionalities of conventional plastics. We present a detailed study of P(HB-co-HHx) copolymers with low to moderate hydroxyhexanoate content to understand how the HHx monomer content influences the thermal and mechanical properties and to link those to their abiotic degradation. By increasing the HHx fractions in the range of 2 – 14 mol%, we impart an extension of the processing window and application range as the melting temperature (Tm) and glass temperature (Tg) of the copolymers decrease from Tm 165 ◦C to 126 ◦C, Tg 4 ◦C to − 5.9 ◦C, accompanied by reduced crystallinity from 54 % to 20 %.
Elongation at break was increased from 5.7 % up to 703 % at 14 mol% HHx content, confirming that the range examined was sufficiently large to obtain ductile and brittle copolymers, while tensile strength was maintained throughout the studied range. Finally, accelerated abiotic degradation was shown to be slowed down with an increasing HHx fraction decreasing from 70 % to 55 % in 12 h.
Establishing ZIF‐8 as a reference material for hydrogen cryoadsorption: An interlaboratory study
(2024)
AbstractHydrogen storage by cryoadsorption on porous materials has the advantages of low material cost, safety, fast kinetics, and high cyclic stability. The further development of this technology requires reliable data on the H2 uptake of the adsorbents, however, even for activated carbons the values between different laboratories show sometimes large discrepancies. So far no reference material for hydrogen cryoadsorption is available. The metal‐organic framework ZIF‐8 is an ideal material possessing high thermal, chemical, and mechanical stability that reduces degradation during handling and activation. Here, we distributed ZIF‐8 pellets synthesized by extrusion to 9 laboratories equipped with 15 different experimental setups including gravimetric and volumetric analyzers. The gravimetric H2 uptake of the pellets was measured at 77 K and up to 100 bar showing a high reproducibility between the different laboratories, with a small relative standard deviation of 3–4 % between pressures of 10–100 bar. The effect of operating variables like the amount of sample or analysis temperature was evaluated, remarking the calibration of devices and other correction procedures as the most significant deviation sources. Overall, the reproducible hydrogen cryoadsorption measurements indicate the robustness of the ZIF‐8 pellets, which we want to propose as a reference material.
In ultrasonic testing, material and structural properties of a specimen can be derived from the time-of-flight (ToF). Using signal features, such as the first peak or envelope maximum, to calculate the ToF is error-prone in multipath arrangements or dispersive and attenuating materials, which is not the case for the signal onset. Borrowing from seismology, researchers used the Akaike information criterion (AIC) picker to automatically determine onset times. The most commonly used formulation, Maeda's AIC picker, is reassessed and found to be based on inappropriate assumptions for signals often used in ultrasonic testing and dependent on arbitrary parameters. Consequently, an onset picker for ultrasonic through-transmission measurements is proposed, based on a spectral entropy criterion (SEC) to model the signal using the AIC framework. This SEC picker takes into account the spectral properties of the ultrasonic signal and is virtually free of arbitrary parameters. Synthetic and experimental data are used to compare the performance of SEC and AIC pickers. It is shown that the accuracy of onset picking is improved for densely sampled data.
Locating and sizing delaminations is a common inspection task in the maintenance and quality control of construction and rehabilitation. Their detection is an important area of application of nondestructive testing in civil engineering (NDT-CE). To improve this application, NDT test systems and test solutions must be compared, for which specimens containing well-defined delaminations are needed to serve as a reference. Currently, there are no widely accepted procedures available for creating such flaws locally and reproducibly. This study presents procedures for creating artificial delaminations repeatably and as close as possible to natural delaminations. To produce the discontinuities only substances were used which can occur in concrete components and do not affect the application of NDT-CE methods. Ultrasonic pulse-echo (UPE) was used to test the flaws in the specimens. The delaminations were created by applying expansive mortar in prepared through holes. Three specimens with two delaminations each were built and tested using UPE.
AbstractAir‐coupled ultrasonic testing (ACU) is a pioneering technique in non‐destructive testing (NDT). While contact testing and fluid immersion testing are standard methods in many applications, the adoption of ACU is progressing slowly, especially in the low ultrasonic frequency range. A main reason for this development is the difficulty of generating high amplitude ultrasonic bursts with equipment that is robust enough to be applied outside a laboratory environment. This paper presents the fluidic ultrasonic transducer as a solution to this challenge. This novel aeroacoustic source uses the flow instability of a sonic jet in a bistable fluidic switch to generate ultrasonic bursts up to 60 kHz with a mean peak pressure of 320 Pa. The robust design allows operation in adverse environments, independent of the operating fluid. Non‐contact through‐transmission experiments are conducted on four materials and compared with the results of conventional transducers. For the first time, it is shown that the novel fluidic ultrasonic transducer provides a suitable acoustic signal for NDT tasks and has potential of furthering the implementation of ACU in industrial applications.This article is protected by copyright. All rights reserved
The ultrasonic echo technique is widely used in non-destructive testing (NDT) of concrete objects for thickness measurements, geometry determinations and localization of built-in components. To improve ultrasonic imaging of complex concrete structures, we transferred a seismic imaging technique, the Reverse Time Migration (RTM), to NDT in civil engineering. RTM, in contrast to the conventionally used synthetic aperture focusing technique (SAFT) algorithms, considers all wavefield types and thus, can handle complex wave propagations in any direction with no limit on velocity variations and reflector dip. In this paper, we focused on the development, application and evaluation of a two-dimensional elastic RTM algorithm considering horizontally polarized shear (SH) waves only. We applied the elastic SH RTM routine to synthetic ultrasonic echo SH-wave data generated with a concrete model incorporating several steps and circular cavities. As these features can often be found in real-world NDT use cases, their imaging is extremely important. By using elastic SH RTM, we were able to clearly reproduce almost all reflectors inside the concrete model including the vertical step edges and the cross sections of the cavities.We were also capable to show that more features could be mapped compared to SAFT, and that imaging of complex reflectors could be sharpened compared to elastic P-SV (compressional-vertically polarized shear) RTM. Our promising results illustrate that elastic SH RTM has the potential to significantly enhance the reconstruction of challenging concrete structures, representing an important step forward for precise, high-quality ultrasonic NDT in civil engineering.
AbstractThe sustainable and resource-efficient production of wind energy plants requires the use of modern high-strength fine-grain structural steels. This applies to both foundation and erection structures, like mobile or ship cranes. During the assembly of steel structures, unacceptable defects can occasionally be found in the weld area. In most cases, the economical solution would be local thermal gouging of the affected areas and re-welding. Due to the high shrinkage restraint of the joint groove in the overall structure, the superposition of global and local welding-induced stresses may lead to crack formation and component failure, particularly in interaction with the degradation of the microstructure and mechanical properties of high-strength steels during the repair process. However, manufacturers hardly have any information about these issues and there is a lack of recommendations and guidelines to take these safety-relevant aspects into account in adequate repair concepts. The aim of this research is to derive recommendations for repair concepts appropriate to the stresses and materials involved providing a basis for standards and guidelines to avoid cold cracking, damage and expensive reworking especially for high-strength steels. Part 1 of this study involves systematic investigations of influences of shrinkage restraint during repair welding of two high-strength steels S500MLO for offshore application and S960QL for mobile crane structures. The quantification of the shrinkage restraint of repair weld joints was achieved by means of experimental and numerical restraint intensity analysis. In welding experiments with self-restrained slot specimens, restraint intensity and introduction of hydrogen via the welding arc using anti spatter spray were varied systematically to analyse the effect on welding result, residual stresses and cold cracking. It could be shown that increasing restraint intensities result in significantly higher transverse residual stress levels. In the case of hydrogen introduction S500MLO showed no cold cracking independent of the restraint conditions. However, S960QL was found to be considerably cold cracking sensitive if hydrogen is introduced. With increasing restraint intensity length and number of cold cracks increases significantly. Part 2 [1] of this study is focussed on microstructure and residual stresses due to gouging and stress optimization via adequate heat control parameters in repair welding.
The high potential of hydrogen as a key factor on the pathway towards a climate neutral economy, leads to rising demand in technical applications, where gaseous hydrogen is used. For several metals, hydrogen-metal interactions could cause a degradation of the material properties. This is especially valid for low carbon and highstrength structural steels, as they are commonly used in natural gas pipelines and analyzed in this work.
This work provides an insight to the impact of hydrogen on the mechanical properties of an API 5L X65 pipeline steel tested in 60 bar gaseous hydrogen atmosphere. The analyses were performed using the hollow specimen technique with slow strain rate testing (SSRT). The nature of the crack was visualized thereafter utilizing μCT imaging of the sample pressurized with gaseous hydrogen in comparison to one tested in an inert atmosphere.
The combination of the results from non-conventional mechanical testing procedures and nondestructive imaging techniques has shown unambiguously how the exposure to hydrogen under realistic service pressure influences the mechanical properties of the material and the appearance of failure.
Wind turbines are exposed to a high number of load cycles during their service lifetime. Therefore, the fatigue strength verification plays an important role in their design. In general, the nominal stress method is used for the fatigue verification of the most common used butt-welded joints. The Eurocode 3 part 1–9 is the current design standard for this field of application. This paper presents recent results of fatigue tests on small-scaled specimens and large components with transverse butt welds to discuss the validity of the FAT-class. Furthermore, results from numerical simulations for the verification with the effective notch stress and the crack propagation approach are used for comparison. Based on the consistency between the numerical results and the fatigue tests, the influence of the seam geometry on the fatigue resistance was investigated. Finally, a prediction of the fatigue strength of butt-welded joints with plate thicknesses up to 80 mm was carried out.
Esta pesquisa avaliou o fenômeno de autocicatrização nas propriedades mecânicas e absorção capilar de concretos estruturais. Foram avaliados dois aditivos cristalizantes em pó, dosados de acordo com o teor recomendado pelos fabricantes. Aditivos cristalizantes aumentam a densidade do gel C-S-H e formam cristais insolúveis, bloqueando fissuras. Três traços de concreto foram produzidos: referência, aditivo-X com 0,8% e aditivo-Y com 2,0% em relação a massa do cimento. Aplicou-se 75% da carga de ruptura aos 3- e 14-dias para gerar microfissuras e comparar com a referência. Posteriormente, a autocicatrização foi avaliada aos 28- e 76-dias. A propriedade de resistência à compressão axial foi determinada aos 28-dias, revelando que os aditivos cristalizantes contribuíram para um aumento médio de 12% desta propriedade. A idade do carregamento dos concretos não apresentou um impacto significativo na resistência à compressão axial, mas apontou resultados significativos entre os tipos de aditivos estudados, conforme ANOVA. As propriedades de absorção de água por capilaridade foram avaliadas aos 28- e 76-dias, indicando uma redução de absorção de água média de 42% devido ao uso dos aditivos cristalizantes. Em conclusão, a incorporação dos aditivos cristalizantes contribuiu de maneira positiva para a autocicatrização dos concretos estudados, indicando uma recuperação parcial das microfissuras.
AbstractRed mud is the waste of bauxite refinement into alumina, the feedstock for aluminium production1. With about 180 million tonnes produced per year1, red mud has amassed to one of the largest environmentally hazardous waste products, with the staggering amount of 4 billion tonnes accumulated on a global scale1. Here we present how this red mud can be turned into valuable and sustainable feedstock for ironmaking using fossil-free hydrogen-plasma-based reduction, thus mitigating a part of the steel-related carbon dioxide emissions by making it available for the production of several hundred million tonnes of green steel. The process proceeds through rapid liquid-state reduction, chemical partitioning, as well as density-driven and viscosity-driven separation between metal and oxides. We show the underlying chemical reactions, pH-neutralization processes and phase transformations during this surprisingly simple and fast reduction method. The approach establishes a sustainable toxic-waste treatment from aluminium production through using red mud as feedstock to mitigate greenhouse gas emissions from steelmaking.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modeling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.
Ring-opening polymerizations (ROPs) of l-lactide (LA) were performed with ethyl l-lactate or 11-bromoundecanol as initiators (In) and tin(II) ethyl hexanoate (SnOct2) as catalyst (Cat) using four different LA/In ratios (20/1, 40/1, 60/1, and 100/1). One series of ROPs was conducted in bulk at 120 °C, yielding PLAs with low dispersities (Ð ~ 1.2–1.4), and a second series was conducted in bulk at 160 °C, yielding higher dispersities (Ð ~ 1.3–1.9). Samples from both series were annealed for 1 or 14 days at 140 °C in the presence of SnOct2. Both polycondensation and disproportionation reactions occurred, so that all four samples tended to form the same type of molar mass distribution below 10,000 Da, regardless of their initially different number average molar masses (Mn). Both initiators gave nearly identical results. The thermodynamic control of all reversible transesterification processes favored the formation of crystallites composed of chains with a Mn around 3500–3700, corresponding to a crystal thickness of 10–13 nm.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
In this work, the electrochemical behavior of 4-phenylurazole (Ph-Ur) was studied and the latter was used as a molecular anchor for the electrochemical bioconjugation of tyrosine (Y). Cyclic voltammetry (CV) and controlled potential coulometry (CPC) allowed the in-situ generation of the PTAD (4-phenyl-3 H-1,2,4-triazole-3,5(4 H)-dione) species from phenylurazole on demand for tyrosine electrolabeling. The chemoselectivity of the reaction was studied with another amino acid (lysine, Lys) and no changes in Lys were observed. To evaluate the performance of tyrosine electrolabeling, coulometric analyses at controlled potentials were performed on solutions of phenylurazole and the phenylurazole-tyrosine mixture in different proportions (2:1, 1:1, and 1:2). The electrolysis of the phenylurazole-tyrosine mixture in the ratio (1:2) produced a charge of 2.07 C, very close to the theoretical value (1.93 C), with high reaction kinetics, a result obtained here for the first time. The products obtained were identified and characterized by liquid chromatography coupled to high-resolution electrospray ionization mass spectrometry (LC-HRMS and LC- HRMS2). Two products were formed from the click reactions, one of which was the majority. Another part of this work was to study the electrochemical degradation of the molecular anchor 4-phenylazole (Ph-Ur). Four stable degradation products of phenylurazole were identified (C7H9N2O, C6H8N, C6H8NO, C14H13N4O2) based on chromatographic profiles and mass spectrometry results. The charge generated during the electrolysis of phenylurazole (two-electron process) (2.85 C) is inconsistent with the theoretical or calculated charge (1.93 C), indicating that secondary/parasitic reactions occurred during the electrolysis of the latter. In conclusion, the electrochemically promoted click phenylurazole-tyrosine reactions give rise to click products with high reaction kinetics and yields in the (1:2) phenylurazole-tyrosine ratios, and the presence of side reactions is likely to affect the yield of the click phenylurazole-tyrosine reaction.
Despite the advances in hardware and software techniques, standard numerical methods fail in providing real-time simulations, especially for complex processes such as additive manufacturing applications. A real-time simulation enables process control through the combination of process monitoring and automated feedback, which increases the flexibility and quality of a process. Typically, before producing a whole additive manufacturing structure, a simplified experiment in the form of a beadon-plate experiment is performed to get a first insight into the process and to set parameters suitably. In this work, a reduced order model for the transient thermal problem of the bead-on-plate weld simulation is developed, allowing an efficient model calibration and control of the process. The proposed approach applies the proper generalized decomposition (PGD) method, a popular model order reduction technique, to decrease the computational effort of each model evaluation required multiple times in parameter estimation, control, and optimization. The welding torch is modeled by a moving heat source, which leads to difficulties separating space and time, a key ingredient in PGD simulations. A novel approach for separating space and time is applied and extended to 3D problems allowing the derivation of an efficient separated representation of the temperature.
The results are verified against a standard finite element model showing excellent agreement. The reduced order model is also leveraged in a Bayesian model parameter estimation setup, speeding up calibrations and ultimately leading to an optimized real-time simulation approach for welding experiment using synthetic as well as real measurement data.
Thermal transient problems, essential for modeling applications like welding and additive metal manufacturing, are characterized by a dynamic evolution of temperature. Accurately simulating these phenomena is often computationally expensive, thus limiting their applications, for example for model parameter estimation or online process control. Model order reduction, a solution to preserve the accuracy while reducing the computation time, is explored. This article addresses challenges in developing reduced order models using the proper generalized decomposition (PGD) for transient thermal problems with a specific treatment of the moving heat source within the reduced model. Factors affecting accuracy, convergence, and computational cost, such as discretization methods (finite element and finite difference), a dimensionless formulation, the size of the heat source, and the inclusion of material parameters as additional PGD variables are examined across progressively complex examples. The results demonstrate the influence of these factors on the PGD model’s performance and emphasize the importance of their consideration when implementing such models. For thermal example, it is demonstrated that a PGD model with a finite difference discretization in time, a dimensionless representation, a mapping for a moving heat source, and a spatial domain non-separation yields the best approximation to the full order model.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as ‘‘electron beam-induced fragmentation’’ or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field 𝐵 = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. 𝐵 = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as “electron beam-induced fragmentation” or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field B = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. B = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
Ergot alkaloids (EAs) formed by Claviceps fungi are one of the most common food contaminants worldwide, affecting cereals such as rye, wheat, and barley. To accurately determine the level of contamination and to monitor EAs maximum levels set by the European Union, the six most common EAs (so-called priority EAs) and their corresponding epimers are quantified using high-performance liquid chromatography coupled with tandem mass spectrometry (HPLC-MS/MS). The quantification of EAs in complex food matrices without appropriate internal tandards is challenging but currently carried out in the standard method EN 7425:2021 due to their commercial unavailability. To address the need for isotopically labeled EAs, we focus on two semi-synthetic approaches for the synthesis of these reference standards. Therefore, we investigate the feasibility of the N6-demethylation of native ergotamine to yield norergotamine, which can subsequently be remethylated with an isotopically labeled methylating reagent, such as iodomethane (13CD3-I), to yield isotopically labeled ergotamine and its C8-epimer ergotaminine. Testing the isotopically labeled ergotamine/-inine against native ergotamine/-inine with HPLC coupled to high-resolution HR-MS/MS proved the structure of ergotamine-13CD3 and ergotaminine-13CD3. Thus, for the first time, we can describe their synthesis from unlabeled, native ergotamine. Furthermore, this approach is promising as a universal way to synthesize other isotopically labeled EAs.
Solvent-free sample preparation offers some advantages over solvent-based techniques, such as improved accuracy, reproducibility and sensitivity, for matrix-assisted laser desorption/ionization (MALDI) analysis. However, little or no information is available on the application of solvent-free techniques for the MALDI analysis of polymer blends. Solvent-free sample preparation by ball milling was applied with varying sample-to-matrix ratios for MALDI time-of-flight mass spectrometry analysis of various polymers, including polystyrenes, poly(methyl methacrylate)s and poly(ethylene glycol)s. The peak intensity ratios were compared with those obtained after using the conventional dried droplet sample preparation method. In addition, solvent-assisted milling was also applied to improve sample homogeneities.
Depending on the sample preparation method used, different peak intensity ratios were found, showing varying degrees of suppression of the signal intensities of higher mass polymers. Ball milling for up to 30 min was required to achieve constant intensity ratios indicating homogeneous mixtures. The use of wet-assisted grinding to improve the homogeneity of the blends was found to be disadvantageous as it caused partial degradation and mass-dependent segregation of the polymers in the vials.The results clearly show that solvent-free sample preparation must be carefully considered when applied to synthetic polymer blends, as it may cause additional problems with regard to homogeneity and stability of the blends.
The plant secondary metabolite families of coumarin and 4-hydroxy coumarin have a broad pharmacological spectrum ranging from antibacterial to anticancer properties. One prominent member of this substance class is the synthetic but naturally inspired anticoagulant drug and rodenticide warfarin (coumadin). A vast number of publications focus on the identification of warfarin and its major cytochrome P450-mediated phase I metabolites by liquid chromatography (LC) with mass spectrometry (MS) and tandem mass spectrometric (MS/MS) detection techniques. For the first time, electron ionization (EI) induced high-resolution quadrupole time-of-flight mass spectrometric (HR-qToF-MS) data of in-liner derivatized warfarin and selected hydroxylated species is provided in this study as an alternative to LC-MS/MS approaches. Furthermore, the characteristic fragments and fragmentation pathways of the analyzed methyl ethers are concluded. The obtained data of analytical standards, specific deuterated and 13C-labeled compounds prove inductive cleavage of the acyl or acetonyl side chain, methyl migration, and H-migration, along with consequential inductive cleavage as predominant fragmentation routes. Based on the HR-spectral data, commonalities and differences between the analyzed compounds and fragment groups were evaluated with future applicability in structure elucidation and spectra prediction of related compounds.
In this study, we demonstrate the applicability of nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) for Ca, Fe, and Se quantification in human serum using isotope dilution (ID) analysis. The matrix tolerance of MICAP-MS in Na matrix was investigated, uncovering that high Na levels can suppress the signal intensity. This suppression is likely due to the plasma loading and the space charge effect. Moreover, 40Ca and 44Ca isotopic fractionation was noted at elevated Na concentration. Nine certified serum samples were analyzed using both external calibration and ID analysis. Overestimation of Cr, Zn, As, and Se was found in the results of external calibration, which might be resulted from C-induced polyatomic interference and signal enhancement, respectively. Further investigations performed with methanol showed a similar enhancement effect for Zn, As, and Se, potentially supporting this assumption. The mass concentrations determined with ID analysis show metrological compatibility with the reference values, indicating that MICAP-MS combined with ID analysis can be a promising method for precise Ca, Fe, and Se determination. Moreover, this combination reduces the influences of matrix effects, broadening the applicability of MICAP-MS for samples with complex matrix.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Powder Bed Fusion – Laser Beam (PBF-LB) of high γ’ strengthened Ni-base superalloys, such as CM247LC, is of great interest for high temperature applications in gas turbines. However, PBF-LB of CM247LC is challenging due to the high cracking susceptibility during PBF-LB processing (solidification cracking) and heat treatment (strain age cracking, mostly caused by residual stresses). This study focuses on understanding the impact of process parameters on microstructure, residual stresses and solidification cracking. Laser power (P), speed (v) and hatch spacing (h) were varied while the layer thickness (t) was fixed. The melt pool size and shape were found to be key factors in minimizing solidification cracking. Narrower and shallower melt pools, achieved using a low line energy density (LED = P/v ≤ 0.1 J/mm), gave low crack densities (0.7 mm/mm2). A tight hatch spacing (h = 0.03 mm) resulted in reduced lack of fusion porosity. Electron backscatter diffraction investigations revealed that parameters giving finer microstructure with 〈100〉crystallographic texture had low crack densities provided they were processed with a low LED. Atom probe tomography elucidated early stages of spinodal decomposition in the as-built condition, where Cr and Al cluster separately. The extent of spinodal decomposition was found to be affected by the LED and the hatch spacing. Samples with low LED and small hatch spacing showed higher degrees of spinodal decomposition. X-ray diffraction residual stress investigations revealed that the residual stress is proportional to the volumetric energy density (VED = P/(v. h. t)). Although low residual stresses can be achieved by using low VED, there is a high risk of lack of fusion. Hence, other parameters such as modified scan strategy, build plate pre-heating and pulsed laser mode, must be further explored to minimize the residual stresses to reduce the strain age cracking susceptibility.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
The ability to controllably move gaseous ions is an essential aspect of ion-based spectrometry (e.g., mass spectrometry and ion mobility spectrometry) as well as materials processing. At higher pressures, ion motion is largely governed by diffusion and multiple collisions with neutral gas molecules. Thus, high-pressure ion optics based on electrostatics require large fields, radio frequency drives, complicated geometries, and/or partially transmissive grids that become contaminated. Here, we demonstrate that low-power standing acoustic waves can be used to guide, block, focus, and separate beams of ions akin to electrostatic ion optics. Ions preferentially travel through the static-pressure regions (“nodes”) while neutral gas does not appear to be impacted by the acoustic field structure and continues along a straight trajectory. This acoustic ion manipulation (AIM) approach has broad implications for ion manipulation techniques at high pressure, while expanding our fundamental understanding of the behavior of ions in gases.
Microbially induced carbonate precipitation (MICP), a widespread phenomenon in nature, is gaining attention as a low-carbon alternative to ordinary Portland cement (OPC) in geotechnical engineering and the construction industry for sustainable development. In the Philippines, however, very few works have been conducted to isolate and identify indigenous, urease-producing (ureolytic) bacteria suitable for MICP. In this study, we isolated seven, ureolytic and potentially useful bacteria for MICP from marine sediments in Iligan City. DNA barcoding using 16s rDNA identified six of them as Pseudomonas stutzeri, Pseudomonas pseudoalcaligenes, Bacillus paralicheniformis, Bacillus altitudinis, Bacillus aryabhattai, and Stutzerimonas stutzeri but the seventh was not identified since it was a bacterial consortium. Bio-cementation assay experiments showed negligible precipitation in the control (without bacteria) at pH 7, 8, and 9. However, precipitates were formed in all seven bacterial isolates, especially between pH 7 and 8 (0.7–4 g). Among the six identified bacterial species, more extensive precipitation (2.3–4 g) and higher final pH were observed in S. stutzeri, and B. aryabhattai, which indicate better urease production and decomposition, higher CO2 generation, and more favorable CaCO3 formation. Characterization of the precipitates by scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS) and attenuated total reflectance Fourier transform spectroscopy (ATR-FTIR) confirmed the formation of three carbonate minerals: calcite, aragonite, and vaterite. Based on these results, all six identified indigenous, ureolytic bacterial species from Iligan City are suitable for MICP provided that the pH is controlled between 7 and 8. To the best of our knowledge, this is the first report of the urease-producing ability and potential for MICP of P. stutzeri, P. pseudoalcaligenes, S. stutzeri, and B. aryabhattai.
In this contribution, we present a physically motivated heat source model for the numerical modeling of laser beam welding processes. Since the calibration of existing heat source models, such as the conic or Goldak model, is difficult, the representation of the heat source using so-called Lamé curves has been established, relying on prior Computational Fluid Dynamics (CFD) simulations.
Lamé curves, which describe the melting isotherm, are used in a subsequent finite-element (FE) simulation to define a moving Dirichlet boundary condition, which prescribes a constant temperature in the melt pool. As an alternative to this approach, we developed a physically motivated heat source model, which prescribes the heat input as a body load directly. The new model also relies on prior CFD simulations to identify the melting isotherm. We demonstrate numerical results of the new heat source model on boundary-value problems from the field of laser beam welding and compare it with the prior CFD simulation and the results of the Lamé curve model and experimental data.
Scattering luminescent materials dispersed in liquid and solid matrices and luminescent powders are increasingly relevant for fundamental research and industry. Examples are luminescent nano- and microparticles and phosphors of different compositions in various matrices or incorporated into ceramics with applications in energy conversion, solid-state lighting, medical diagnostics, and security barcoding. The key parameter to characterize the performance of these materials is the photoluminescence/fluorescence quantum yield (Φf), i.e., the number of emitted photons per number of absorbed photons. To identify and quantify the sources of uncertainty of absolute measurements of Φf of scattering samples, the first interlaboratory comparison (ILC) of three laboratories from academia and industry was performed by following identical measurement protocols. Thereby, two types ofcommercial stand-alone integrating sphere setups with different illumination and detection geometries were utilized for measuring the Φf of transparent and scattering dye solutions and solid phosphors, namely, YAG:Ce optoceramics of varying surface roughness, used as converter materials for blue light emitting diodes. Special emphasis was dedicated to the influence of the measurement geometry, the optical properties of the blank utilized to determine the number of photons of the incident excitation light absorbed by the sample, and the sample-specific surface roughness. While the Φf values of the liquid samples matched between instruments, Φf measurements of the optoceramics with different blanks revealed substantial differences. The ILC results underline the importance of the measurement geometry, sample position, and blank for reliable Φf data of scattering the YAG:Ce optoceramics, with the blank’s optical properties accounting for uncertainties exceeding 20%.
Multilayer Insulation (MLI) is frequently used in vacuum conditions for the thermal insulation of cryogenic storage tanks. The severe consequences of the degradation of such materials in engulfing fire scenarios were recently evidenced by several large-scale experimental tests. In the present study, an innovative modelling approach was developed to assess the performance of heat transfer in polyester-based MLI materials for cryogenic applications under fire conditions. A specific layer-by-layer approach was integrated with an apparent kinetic thermal degradation model based on thermogravimetric analysis results. The modeling results provided a realistic simulation of the experimental data obtained by High-Temperature Thermal Vacuum Chamber tests reproducing fire exposure conditions. The model was then applied to assess the behavior of MLI systems for liquid hydrogen tanks in realistic fire scenarios. The results show that in intense fire scenarios degradation occurs rapidly, compromising the thermal insulation performances of the system within a few minutes.
There is only sparse empirical data on the settling velocity of small, non-buoyant microplastics thus far, although it is an important parameter governing their vertical transport within aquatic environments. This study reports the settling velocities of 4031 exemplary microplastic particles. Focusing on the environmentally most prevalent particle shapes, irregular microplastic fragments of four different polymer types (9–289 µm) as well as five discrete length fractions (50–600 µm) of common nylon and polyester fibers were investigated, respectively. All settling experiments were carried out in quiescent water using a specialized optical imaging setup. The method has been previously validated in order to minimize disruptive factors, e.g. thermal convection or particle interactions, and thus enable the precise measurements of the velocities of individual microplastic particles (0.003–9.094 mm/s). Based on the obtained data, ten existing models for predicting a particle’s terminal settling velocity were assessed. It is concluded that models, which were specifically deduced from empirical data on larger microplastics, fail to provide accurate predictions for small microplastics. Instead, a different approach is highlighted as a viable option for computing settling velocities across the microplastics continuum in terms of size, density and shape.
Iron oxide of various structures is frequently used as food colorant (E 172). The spectrum of colors ranges from yellow over orange, red, and brown to black, depending on the chemical structure of the material. E 172 is mostly sold as solid powder. Recent studies have demonstrated the presence of nanoscaled particles in E 172 samples, often to a very high extent. This makes it necessary to investigate the fate of these particles after oral uptake. In this study, 7 differently structured commercially available E 172 food colorants (2 x Yellow FeO(OH), 2 x Red Fe2O3, 1 x Orange Fe2O3 + FeO(OH) and 2 x Black Fe3O4) were investigated for particle dissolution, ion release, cellular uptake, crossing of the intestinal barrier and toxicological impact on intestinal cells. Dissolution was analyzed in water, cell culture medium and artificial digestion fluids. Small-angle X-ray scattering (SAXS) was employed for determination of the specific surface area of the colorants in the digestion fluids. Cellular uptake, transport and toxicological effects were studied using human differentiated Caco-2 cells as an in vitro model of the intestinal barrier. For all materials, a strong interaction with the intestinal cells was observed, albeit there was only a limited dissolution, and no toxic in vitro effects on human cells were recorded.
The corrosion behavior of galvanized steels and zinc components under atmospheric exposure depends mostly on the corrosion product‐based cover layer formation under the prevailing conditions. The use of agar‐based gel electrolytes makes it possible to use electrochemical methods to obtain a characteristic value from these cover layers that describe their current and future protective capacity. It is shown here that different states of galvanized steel can be distinguished very well under laboratory conditions and that this method is also suitable for use under practical conditions. Based on the characteristic values and assuming future time of wetness, it is very easy to draw up a forecast for the future corrosion rate, which provides plausible values.
The production of plastics is rising since they have been invented. Micro, submicro- and nanoplastics are produced intentionally or generated by environmental processes, and constitute ubiquitous contaminants which are ingested orally by consumers. Reported health concerns include intestinal translocation, inflammatory response, oxidative stress and cytotoxicity. Every digestive milieu in the gastrointestinal tract does have an influence on the properties of particles and can cause changes in their effect on biological systems. In this study, we subjected plastic particles of different materials (polylactic acid, polymethylmethacrylate, melamine formaldehyde) and sizes (micro- to nano-range) to a complex artificial digestion model consisting of three intestinal fluid simulants (saliva, gastric and intestinal juice). We monitored the impact of the digestion process on the particles by performing Dynamic Light Scattering, Scanning Electron Microscopy and Asymmetric Flow Field-Flow Fractionation. An in vitro model of the intestinal epithelial barrier was used to monitor cellular effects and translocation behavior of (un)digested particles. In conclusion, artificial digestion decreased cellular interaction and slightly increased transport of all particles across the intestinal barrier. The interaction with organic matter resulted in clear differences in the agglomeration behavior. Moreover, we provide evidence for polymer-, size- and surface-dependent cellular effects of the test particles.
Chloride binding by the hydrate phases of cementitious materials influences the rate of chloride ingress into these materials and, thus, the time at which chloride reaches the steel reinforcement in concrete structures. Chloride binding isotherms of individual hydrate phases would be required to model chloride ingress but are only scarcely available and partly conflicting. The present study by RILEM TC 283-CAM ‘Chloride transport in alkali-activated materials’ significantly extends the available database and resolves some of the apparent contradictions by determining the chloride binding isotherms of layered double hydroxides (LDH), including AFm phases (monosulfate, strätlingite, hydrotalcite, and meixnerite), and of alkali-activated slags (AAS) produced with four different activators (Na2SiO3, Na2O·1.87SiO2, Na2CO3, and Na2SO4), in NaOH/NaCl solutions at various liquid/solid ratios. Selected solids after chloride binding were analysed by X-ray diffraction, and thermodynamic modelling was applied to simulate the phase changes occurring during chloride binding by the AFm phases. The results of the present study show that the chloride binding isotherms of LDH/AFm phases depend strongly on the liquid/solid ratio during the experiments. This is attributed to kinetic restrictions, which are, however, currently poorly understood. Chloride binding by AAS pastes is only moderately influenced by the employed activator. A steep increase of the chloride binding by AAS occurs at free chloride concentrations above approx. 1.0 M, which is possibly related to chloride binding by the C–(N–)A–S–H gel in the AAS.
Mean-field modeling and phase-field simulation of grain growth under directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> α tⁿ with an exponent n ~ 0.6–0.7. The exponent n exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n ≈ 0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.
The production of plastics is rising since they have been invented. Micro, submicro- and nanoplastics are produced intentionally or generated by environmental processes, and constitute ubiquitous contaminants which are ingested orally by consumers. Reported health concerns include intestinal translocation, inflammatory response, oxidative stress and cytotoxicity. Every digestive milieu in the gastrointestinal tract does have an influence on the properties of particles and can cause changes in their effect on biological systems. In this study, we subjected plastic particles of different materials (polylactic acid, polymethylmethacrylate, melamine formaldehyde) and sizes (micro- to nano-range) to a complex artificial digestion model consisting of three intestinal fluid simulants (saliva, gastric and intestinal juice). We monitored the impact of the digestion process on the particles by performing Dynamic Light Scattering, Scanning Electron Microscopy and Asymmetric Flow Field-Flow Fractionation. An in vitro model of the intestinal epithelial barrier was used to monitor cellular effects and translocation behavior of (un)digested particles. In conclusion, artificial digestion decreased cellular interaction and slightly increased transport of all particles across the intestinal barrier. The interaction with organic matter resulted in clear differences in the agglomeration behavior. Moreover, we provide evidence for polymer-, size- and surface-dependent cellular effects of the test particles.
Heterogeneous sandwich immunoassays are widely used for biomarker detection in bioanalysis and medical diagnostics. The high analyte sensitivity of the current “gold standard” enzyme-linked immunosorbent assay (ELISA) originates from the signal-generating enzymatic amplification step, yielding a high number of optically detectable reporter molecules. For future point-of-care testing (POCT) and point-of-need applications, there is an increasing interest in more simple detection strategies that circumvent time-consuming and temperature-dependent enzymatic reactions. A common concept to aim for detection limits comparable to those of enzymatic amplification reactions is the usage of polymer nanoparticles (NP) stained with a large number of chromophores. We explored different simple NP-based signal amplification strategies for heterogeneous sandwich immunoassays
that rely on an extraction-triggered release step of different types of optically detectable reporters. Therefore, streptavidinfunctionalized polystyrene particles (PSP) are utilized as carriers for (i) the fluorescent dye coumarin 153 (C153) and (ii) hemin (hem) molecules catalyzing the luminol reaction enabling chemiluminescence (CL) detection. Additionally, (iii) NP labeling with hemin-based microperoxidase MP11 was assessed. For each amplification approach, the PSP was first systematically optimized regarding size, loading concentration, and surface chemistry. Then, for an immunoassay for the inflammation marker C- eactive protein (CRP), the analyte sensitivity achievable with optimized PSP
ystems was compared with the established ELISA concept for photometric and CL detection. Careful optimization led to a limit of detection (LOD) of 0.1 ng/mL for MP11-labeled PSP and CL detection, performing similarly well to a photometric ELISA (0.13 ng/mL), which demonstrates the huge potential of our novel assay concept.
The 2023 Nobel Prize in Chemistry was awarded to Aleksey I. Ekimov (prize share 1/3), Louis E. Brus (prize share 1/3), and Moungi G. Bawendi (prize share 1/3) for groundbreaking inventions in the field of nanotechnology, i.e., for the discovery and synthesis of semiconductor nanocrystals, also termed quantum dots, that exhibit size-dependent physicochemical properties enabled by quantum size effects. This feature article summarizes the main milestones of the discoveries and developments of quantum dots that paved the road to their versatile applications in solid-state lighting, display technology, energy conversion, medical diagnostics, bioimaging, and image-guided surgery.
Determination of short carbon fiber orientation in zirconium diboride ceramic matrix composites
(2024)
In fiber-reinforced components, the fiber alignment and orientation have paramount influence on the thermomechanical properties of the resulting composite, for both short and continuous fiber. Here we present the case of an ultra-refractory matrix intended for extreme environment applications, ZrB2, reinforced with 20 vol% and 50 vol% short carbon fibers. In both cases, fibers tend to align perpendicular to the uniaxial pressure applied during shaping and sintering of a pellet, although the fiber tilt across the pellet thickness is difficult to determine. Moreover, for high volume fractions of reinforcement, the spatial distribution of the fibers is heterogeneous and tends to have domains of preferential orientations. We compare the information on the fiber distribution as collected by scanning electron microscopy images, X-ray computed tomography and synchrotron X-ray refraction radiography (SXRR). The three techniques prove to be complementary. Importantly, we demonstrate that SXRR yields the most statistically significant information due to the largest field of view, yet with a sensitivity down to the nanometer, and that can be successfully applied also to heavy matrix materials, such as zirconium boride.
Here, we report a comparative study of different sum parameter analysis methods for the extraction of per- and polyfluoroalkyl substances (PFAS) from manufactured consumer products, which can be measured by combustion ion chromatography (CIC). Therefore, a hydrolysis-based extraction method was further developed, which accounts for the addition of hydrolyzable covalently bound polyfluoroalkylated side-chain polymers (SFPs) to the extractable organic fluorine portion of the mass balance proposed as "hydrolyzable organically bound fluorine" (HOF). To test this hypothesis, the method was applied to 39 different consumer products containing fluoropolymers or monomeric PFAS taken from four different categories: outdoor textiles, paper packaging, carpeting, and permanent baking sheets. We also evaluated the method's efficiency by extracting four synthesized fluorotelomer polyacrylate reference compounds. The total fluorine (TF) and extractable organically bound fluorine (EOF) values were measured through CIC using established protocols. The TF values ranged from sub-ppb to %-levels, depending on the compound class. All samples showed results for hydrolyzed organofluorine (HOF) between 0.03 and 76.3 μg/g, while most EOF values were lower (<LOD to 58.1 μg/g). Moreover, the methods were contrasted with the "total hydrolyzable precursor" (THP) assay analyzed using gas-chromatography coupled mass spectrometry (GC-MS), which yielded concentrations of 6:2–10:2 fluorotelomer alcohols (<LOD-568 μg/g) for textile and paper samples. Furthermore, targeted analytical investigation of 25 compounds via liquid chromatography coupled tandem mass spectrometry (LC-MS/MS) was conducted and accounted for significantly lower sum amounts (<LOD-0.98 μg PFAS/g). To estimate the fluorine mass balance of all methods, the fluorine levels of target analytical data were calculated and compared to the sum parameter values and evaluated. Finally, the efficiency of the extraction method was approximated by the recovery analysis of four selected SFP model compounds compared to their TF values, yielding 36.7–74.0% after extraction and 3.8–36.3% after processing the extract for the HOF sum parameter.
Investigation on the Durability of a Polypropylene Geotextile under Artificial Aging Scenarios
(2024)
Geosynthetics are widely used in various civil engineering applications, such as geotextiles in coastal protection, and display a sustainable alternative to natural mineral materials. However, the full benefits of using geosynthetics can only be gained with a long service lifetime of the products. With the use of added stabilizers to the polymers, service lifetimes can be achieved in the range of 100 years. Therefore, accelerated aging methods are needed for the assessment of the long-term performance of geotextiles. In the present study, the behavior of geosynthetic materials made of polypropylene was investigated under artificial aging conditions involving elevated temperatures ranging from 30 to 80 °C, increased oxygen pressures ranging from 10 to 50 bar in water-filled autoclaves, and UV irradiation under atmospheric conditions. ATR-IR spectroscopy was employed to detect the increase in the carbonyl index over various aging durations, indicating the oxidative degradation of the geotextile. The most pronounced increase was observed in the case of aging through UV irradiation, followed by thermal aging. Elevated pressure, on the other hand, had a lower impact on oxidation. High-temperature size exclusion chromatography was utilized to follow the reduction in molar mass under different degradation conditions, and the results were consistent with those obtained from ATR-IR spectroscopy. In polyolefins such as polypropylene, Hindered Amine Stabilizers (HAS) are used to suppress oxidation caused by UV radiation. The quantitative analysis of HAS was carried out using a UV/Vis method and HPLC. The degradation of UV stabilizers during the aging of geotextiles is responsible for the oxidation and the reduction in the molar mass of polypropylene. From the results, it can be concluded that applications of PP geotextile without soil or sand cover might cause the risk of the formation of microplastic particles. Material selection, design, and maintenance of the construction must follow best practices, including the system’s removal or replacement at end-of-life. Otherwise, a sustainable use of geotextiles in civil engineering is not possible.
The use of ashes from municipal solid waste incineration as secondary building materials is an important pillar for the circular economy in Germany. However, leaching of potential toxic elements from these materials must be at environmentally acceptable levels. Normally, a three-month ageing period immobilizes most hazardous heavy metals, but antimony (Sb) and vanadium (V) showed previously unusual leaching. In order to clarify the mechanisms, we analyzed the Sb and V species in various bottom and fly ashes from municipal waste incineration by XANES spectroscopy. Antimony oxidizes from Sb(+ III) species used as flame retardants in plastics to Sb(+ V) compounds during waste incineration. However, owing to the similarity of different Sb(+ V) compound in the Sb K- and L-edge XANES spectra, it was not possible to accurately identify an exact Sb(+ V) species. Moreover, V is mainly present as oxidation state + V compound in the analyzed ashes. However, the coarse and magnetic fraction of the bottom ashes contain larger amounts of V(+ III) and V(+ IV) compounds which might enter the waste incineration from vanadium carbide containing steel tools. Thus, Sb and V could be critical potential toxic elements in secondary building materials and long-term monitoring of the release should be taken into account in the future.
With 2,2-dibutyl-2-stanna-1,3-dithiolane (DSTL) and 2-stanna-1,3-dioxa-4,5,6,7-dibenzoxepane (SnBiPh) as catalysts ring-expansion polymerizations (REP) were performed either in 2 M solution using three different solvents and two different temperatures or in bulk at 140 and 120 ◦C. A kinetically controlled rapid REP up to weight average molecular masses (Mẃs) above 300 000 was followed by a slower degradation of the molecular masses at 140 ◦C, but not at 120 ◦C Furthermore, a low molecular mass cyclic poly(L-lactide) (cPLA) with a Mn around 16 000 was prepared by polymerization in dilute solution and used as starting material for ring-ring equilibration at 140 ◦C in 2 M solutions. Again, a decrease of the molecular mass was detectable, suggesting that the equilibrium Mn is below 5 000. The degradation of the molecular masses via RRE was surprisingly more effective in solid cyclic PLA than in solution, and a specific transesterification mechanism involving loops on the surface of crystallites is proposed. This degradation favored the formation of extended-ring crystallites, which were detectable by a “saw-tooth pattern” in their MALDI mass spectra.
Four donor-acceptor boron difluoride complexes based on the carbazole electron donor and the [1,3,5,2]oxadiazaborinino[3,4-a][1,8]naphthyridine acceptor were designed, synthesized, and systematically spectroscopically investigated in solutions, in the solid states, and dye-doped polymer films. The dyes exhibit an intense blue to red solid-state emission with photoluminescence quantum yields of up to 56% in pure dye samples and 86% in poly(methyl methacrylate) films. All boron complexes show aggregation-induced emission and reversible mechanofluorochromism. The optical properties of these dyes and their solid state luminescence can be tuned by substitution pattern, i.e., the substituents at the naphthyridine unit. Exchange of CH3- for CF3-groups does not only increase the intramolecular charge transfer character, but also provides a crystallization-induced emission enhancement.
Transparent conductive oxides such as indium tin oxide (ITO) are standards for thin film electrodes, providing a synergy of high optical transparency and electrical conductivity. In an electrolytic environment, the determination of an inert electrochemical potential window is crucial to maintain a stable material performance during device operation. We introduce operando ellipsometry, combining cyclic voltammetry (CV) with spectroscopic ellipsometry, as a versatile tool to monitor the evolution of both complete optical (i.e., complex refractive index) and electrical properties under wet electrochemical operational conditions. In particular, we trace the degradation of ITO electrodes caused by electrochemical reduction in a pH-neutral, water-based electrolyte environment during electrochemical cycling. With the onset of hydrogen evolution at negative bias voltages, indium and tin are irreversibly reduced to the metallic state, causing an advancing darkening, i.e., a gradual loss of transparency, with every CV cycle, while the conductivity is mostly conserved over multiple CV cycles. Post-operando analysis reveals the reductive (loss of oxygen) formation of metallic nanodroplets on the surface. The reductive disruption of the ITO electrode happens at the solid–liquid interface and proceeds gradually from the surface to the bottom of the layer, which is evidenced by cross-sectional transmission electron microscopy imaging and complemented by energy-dispersive X-ray spectroscopy mapping. As long as a continuous part of the ITO layer remains at the bottom, the conductivity is largely retained, allowing repeated CV cycling. We consider operando ellipsometry a sensitive and nondestructive tool to monitor early stage material and property changes, either by tracing failure points, controlling intentional processes, or for sensing purposes, making it suitable for various research fields involving solid–liquid interfaces and electrochemical activity.
AbstractIn this study, we compare the residual stress state in a laser powder bed fusion (PBF‐LB/M) AlSi10Mg alloy in the as‐built (AB) condition with that after two different heat treatments (265 °C for 1 h, HT1; and 300 °C for 2 h, HT2). The bulk residual stress (RS) is determined using synchrotron X‐ray diffraction (SXRD), and near‐surface profiles are determined using laboratory energy‐dispersive X‐ray diffraction (EDXRD). The EDXRD results do not reveal any notable difference between the conditions at a depth of 350 μm, suggesting that the machining process yields a comparable residual stress state in the near‐surface regions. On the other hand, the SXRD results show that HT1 is more effective in relieving the bulk RS. It is observed that HT1 reduces the RS state in both the aluminium matrix and the silicon network. In addtion, HT2 does not have a significant impact on relaxing the RS as‐built state of the matrix, although it does induce a reduction in the RS magnitudes of the Si phase. It is concluded that the heat treatment stress relieving is effective as long as the Si‐network is not disaggregated.
Efficient density evolution during sintering of the as-printed component is vital to reach full densification and required properties of binder jet (BJT) components. However, due to the high porosity and brittle nature of the green compact, analysis of the microstructure development during sintering is very difficult, resulting in lack of understanding of the densification process. Density development from green state (57 ± 1.6 %) up to full density (99 ± 0.3 %) was characterized by high-resolution synchrotron X-Ray computed tomography (SXCT) on BJT 316L samples from ex-situ interrupted sintering tests. Periodicity of density fluctuations along the building direction was revealed for the first time and was related to the layer thickness of ~ 42 μm during printing that decreased down to ~ 33 μm during sintering. Sintering simulations, utilizing a continuum sintering model developed for BJT, allowed to replicate the density evolution during sintering with a mean error of 2 % and its fluctuation evolution from green (1.66 %) to sintered (0.56 %) state. Additionally, simulation of extreme particle size segregation (1 μm to 130 μm) suggested that non-optimized printing could lead to undesirable density fluctuation amplitude rapid increase (~10 %) during sintering. This might trigger the nucleation of defects (e.g., layer delamination, cracking, or excessive residual porosity) during the sintering process.
Effect of high-pressure hydrogen environment on the physical and mechanical properties of elastomers
(2024)
This study presents the influence of high-pressure hydrogen environment on the physical and mechanical properties of two types of cross-linked hydrogenated acrylonitrile butadiene rubbers. Based on the CSA/ANSI standard, static exposures in hydrogen experiments were performed up to 100 MPa at 120 °C. Characterization before and after exposure was conducted by means of density and hardness measurements, dynamic mechanical analysis (DMA), tensile tests, compression set, FT-IR and AFM analyses to assess effects after decompression. While the effect of high-pressure exposure is significant immediately after exposure, most of the physical and mechanical properties recover after 48 hours. FT-IR, AFM, SEM and compression set results indicate, however, permanent effects.
A corrosion study is performed on six variations of titanium grade 5 (Ti6Al4V) samples. Samples are prepared in different conditions by variation of preanodization, postanodization, and picosecond-laser (ps-laser) surface treatment, while polished and anodized samples serve as reference. Microcones and nanosized periodic surface features are successfully produced on Ti6Al4V samples. The morphology and topography of the structures are visualized by scanning electron microscopy and white light interference microscopy. Furthermore, the relative electrochemically active surface area (ECSA) is determined for the ps-laser-treated samples. It is determined that the preanodized and laser-treated sample has 3.5 times larger ECSA than a polished sample, and that the laser-treated sample has 4.1 times larger area. Moreover, Tafel analysis is performed to determine the corrosion properties of the samples. It is shown that the corrosion resistance improves for both laser-structured samples after the anodization. To further study the surface of the samples, electrochemical impedance spectroscopy measurements are conducted. The study indicates that the ps-laser-treated and anodized Ti6Al4V is suitable to be used for the fabrication of bone screws and plates due to its improved corrosion resistance as compared to nonanodized samples.
Climate change and the pressure to decarbonize, as well as energy security concerns, have drawn the attention of policymakers and the industry to hydrogen energy. To ad-vance the hydrogen economy at a global scale, research and innovation progress is of significant importance, among others. However, previous studies have provided only lim-ited quantitative evidence of the effects of research and innovation on the formation of a global hydrogen market. Instead, they postulate rather than empirically support this rela-tionship. Therefore, this study analyzes the effects of research and innovation measured by scientific publications, patents, and standards on bilateral hydrogen trade flows for 32 countries between 1995 and 2019 in a gravity model of trade, using regression analyses and Poisson Pseudo Maximum Likelihood (PPML) estimation. The main results of the PPML estimation show that research and innovation progress is indeed associated with increased trade, especially with patenting and (international) standardization enhancing hydrogen export volumes. As policy implications, we derive that increased public R&D funding can help increase the competitiveness of hydrogen energy and boost market growth, along with infrastructure support and harmonized standards and regulations.
In the past two decades, numerous relaxation or physical aging experiments of metallic glasses have revealed signatures of intermittent atomic-scale processes. Revealed via intensity cross-correlations from coherent scattering using X-ray photon correlation spectroscopy (XPCS), the observed abrupt changes in the time-domain of atomic motion does not fit the picture of gradual slowing down of relaxation times and their origin continues to remain unclear. Using a binary Lennard-Jones model glass subjected to microsecond-long isotherms, we show here that temporally and spatially heterogeneous atomic-cluster activity at different length-scales drive the emergence of highly non-monotonous intensity cross-correlations. The simulated XPCS experiments reveal a variety of time-dependent intensity-cross correlations that, depending on both the structural evolution and the 𝑞-space sampling, give detailed insights into the possible structural origins of intermittent aging measured with XPCS.
Distributed fiber optic sensors for structural health monitoring of composite pressure vessels
(2024)
In diesem Beitrag geben wir einen umfassenden Überblick über unsere Forschung auf dem Gebiet der verteilten faseroptischen Sensorik für die strukturelle Zustandsüberwachung von Wasserstoffdruckbehältern aus Verbundwerkstoffen. Insbesondere zeigen wir, wie die Integration von faseroptischen Sensoren in Druckbehälter aus Verbundwerkstoffen die Sicherheit erhöht und gleichzeitig die Wartungskosten senkt. Die geringe Größe von Lichtwellenleitern ermöglicht ihre Integration in Verbundwerkstoffstrukturen während des Herstellungsprozesses, wodurch eine kontinuierliche Überwachung sowie eine präzise Erkennung und Lokalisierung von Strukturschäden während des Betriebs der Druckbehälter ermöglicht wird. Wir erörtern auch das Potenzial modernster Signalverarbeitungsmethoden und des maschinellen Lernens für die Weiterentwicklung der vorausschauenden Instandhaltung. Die von uns vorgestellten Anwendungen von faseroptischen Sensoren zeigen, dass sie einen wichtigen Beitrag zur Energiewende hin zu erneuerbaren Energien leisten können.
Polymers with intrinsic microporosity (PIMs) are gaining attention as gas separation membranes. Nevertheless, they face limitations due to pronounced physical aging. In this study a covalent organic framework containing λ5-phosphinine moieties, CPSF-EtO were incorporated as a nanofiller (concentration range 0-10 wt%) into a PIM-1 matrix forming dense films with a thickness of ca. 100 μm. The aim of the investigation was to investigate possible enhancements of gas transport properties and mitigating effects on physical aging. The incorporation of the nanofiller occurred on aggregate level with domains up to 100 nm as observed by T-SEM and confirmed by X-ray scattering. Moreover, the X-ray data show that the structure of the microporous network of the PIM-1 matrix is changed by the nanofiller.
As the molecular mobility is fundamental for gas transport as well as for physical aging, the study includes dielectric investigations of pure PIM-1 and PIM-1/CPSF-EtO mixed matrix membranes to establish a correlation between the molecular mobility and the gas transport properties. Using the time-lag method the gas permeability and the permselectivity were determined for N2, O2, CH4 and CO2 for samples with variation in filler content. A significant increase in the permeability of CH4 and CO2 (50 % increase compared to pure PIM-1) was observed for a concentration of 5 wt% of the nanofiller. Furthermore, the most pronounced change in the permselectivity was found for the gas pair CO2/N2 at a filler concentration of 7 wt%.
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a “chaotic” (rough) surface from an aperiodic into a periodic structure.
The Varestraint test and its variant Transvarestraint are one of the most widely used techniques for evaluating a material solidification cracking sensitivity during welding. The result of such tests is a crack length which is proportional to the material’s cracking susceptibility. Nevertheless, the welding and load parameters can unintentionally influence the crack length, which in some cases can distort the material evaluation. An approach is described as to how these effects can be assessed with the aid of a digital crack analysis. The crack lengths are compared position-dependently with their possible propagation due to the weld pool movement during continuous loading. The index derived from this can be used by the operator to evaluate his test parameters. In addition, a comparison of the results of different Varestraint setups is made possible. Alongside experimental results, a numerical sensitivity analysis is presented on how individual welding and loading parameters can affect the crack lengths.
With the reduction of large oil spills because of stricter regulations and safety measures, the question of how to manage smaller oil spills arises. Few on-site analytical tools are available for first responders or other law enforcement personnel to rapidly test for crude oil in the early management of localized polluted areas. The approach reported here relies on well-described computer-assisted multivariate data analysis of the intrinsic fluorescence fingerprints of crude oils to build a multivariate model for the rapid classification of crude oils and the prediction of their properties. Thanks to a dedicated robust portable reader, the method allowed classification and accurate prediction of various properties of crude oil samples like density (according to API, the American Petroleum Institute and viscosity as well as composition parameters such as volume fractions of paraffins or aromatics. In this way, autonomous operation in on-site or in-the-field applications becomes possible based on the direct (undiluted and untreated) measurement of samples and a rapid, tablet-operated readout system to yield a robust and simple analytical test with superior performance. Testing in real-life scenarios allowed the successful classification and prediction of a number of oil spill samples as well as weathered samples that closely resemble samples collected by first responders.
AbstractSince the 1950s, Warfarin has been used globally as both a prescription drug and a rodenticide. Research has shown that warfarin and other rodenticides are present in the environment and food chain. However, emerging contaminants are subject to degradation by biotic and abiotic processes and advanced oxidation processes. In some cases, detecting the parent compound may not be possible due to the formation of structurally changed species. This approach aims to identify hydroxylated transformation products of warfarin in a laboratory setting, even after the parent compound has undergone degradation. Therefore, the Fenton reaction is utilized to insert hydroxylation into the parent compound, warfarin, by hydroxyl and hydroperoxyl radicals generated by Fe2+/Fe3+ redox reaction with hydrogen peroxide. Using multiple reaction monitoring, a GC–MS/MS method, incorporating isotopically labeled reference compounds, is used to quantify the expected derivatized species. The analytes are derivatized using trimethyl-3-trifluoromethyl phenyl ammonium hydroxide, and the derivatization yield of warfarin is determined by using isotopically labeled reference compounds. The method has a linear working range of 30 to 1800 ng/mL, with detection limits ranging from 18.7 to 67.0 ng/mL. The analytes are enriched using a C18-SPE step, and the recovery for each compound is calculated. The Fenton reaction generates all preselected hydroxylated transformation products of warfarin. The method successfully identifies that 4′-Me-O-WAR forms preferentially under the specified experimental conditions. By further optimizing the SPE clean-up procedures, this GC–MS-based method will be suitable for detecting transformation products in more complex matrices, such as environmental water samples. Overall, this study provides a better understanding of warfarin’s degradation and offers a robust analytical tool for investigating its transformation products.
Multiple principal element alloys encompass the well-known high entropy alloys (HEA). The alloy system represents a new class of materials consisting of at least three alloying elements, each containing 5 to 35 at.%. Thus, this alloying concept differs fundamentally from conventional materials such as steel or nickel alloys. For this purpose, the alloying elements are specifically selected, the microstructures are adjusted in a single-phase and, in some cases, multi-phase manner. In particular, conflicting goals, such as the trade-off between strength and ductility in conventional steels, are overcome. However, in the last 20 years, the focus has been on material synthesis. With the increase in available material quantities, the focus is now on processing issues such as joining and welding processes. The weldability of HEAs has received very little attention so far. The experience with dissimilar metal welds is completely lacking but is essential for the application of these materials in combination with conventional materials. The present study presents comprehensive experimental results on the weldability of an equimolar CoCrFeMnNi-HEA in cold-rolled and heat-treated condition, which was joined by tungsten inert gas welding to an austenitic steel AISI 304. The mechanical properties of the dissimilar metal welds were characterized by cross-weld tensile samples, whereas the local deformation in the weld of the different welding zones was measured by digital image correlation. In accordance with the respective initial HEA condition (cold-rolled vs. heat-treated), the local strain behavior was divergent and influenced the global mechanical properties of both DMW types. Nonetheless, the experiments provided proof in principle of the weldability for dissimilar joints of the CoCrFeMnNi-HEA welded to conventional materials like austenitic stainless steels ensuring a corresponding capability for mechanical loading. This allows further considerations on the application of these innovative materials.
The LOBSTER (Deringer et al., 2011;Maintz et al., 2013 ,2016 ;Nelson et al., 2020 ) software aids in extracting quantum-chemical bonding information from materials by projecting the plane-wave based wave functions from density functional theory (DFT) onto an atomic orbital basis. LobsterEnv, a module implemented in pymatgen (Ong et al., 2013) by some of the authors of this package, facilitates the use of quantum-chemical bonding information obtained from LOBSTER calculations to identify neighbors and coordination environments. LobsterPy is a Python package that offers a set of convenient tools to further analyze and summarize the LobsterEnv outputs in the form of JSONs that are easy to interpret and process. These tools enable the estimation of (anti) bonding contributions, generation of textual descriptions, and visualization of LOBSTER computation results. Since its first release, both LobsterPy and LobsterEnv capabilities have been extended significantly. Unlike earlier versions, which could only automatically analyze Crystal Orbital Hamilton Populations (COHPs) (Dronskowski & Blöchl, 1993), both can now also analyze Crystal Orbital Overlap Populations (COOP) (Hughbanks & Hoffmann, 1983) and Crystal Orbital Bond Index (COBI) (Müller et al., 2021). Extracting the information about the most important orbitals contributing to the bonds is optional, and users can enable it as needed. Additionally, bonding-based features for machinelearning (ML) studies can be engineered via the sub-packages “featurize” and “structuregraphs”. Alongside its Python interface, it also provides an easy-to-use command line interface (CLI) that runs automatic analysis of the computations and generates a summary of results and publication-ready figures. LobsterPy has been used to produce the results in Ngo et al. (2023), Chen et al. (2024), Naik et al. (2023), and it is also part of Atomate2 (2023) bonding analysis workflow for generating bonding analysis data in a format compatible with the Materials Project (Jain et al., 2013) API.
Numerical and experimental assessment of liquid metal embrittlement in externally loaded spot welds
(2024)
Zinc-based surface coatings are widely applied with high-strength steels in automotive industry. Some of these base materials show an increased brittle cracking risk during loading. It is necessary to examine electrogalvanized and uncoated samples of a high strength steel susceptible to liquid metal embrittlement during spot welding with applied external load. Therefore, a newly developed tensile test method with a simultaneously applied spot weld is conducted. A fully coupled 3D electrical, thermal, metallurgical and mechanical finite element model depicting the resistant spot welding process combined with the tensile test conducted is mandatory to correct geometric influences of the sample geometry and provides insights into the sample’s time dependent local loading. With increasing external loads, the morphology of the brittle cracks formed is affected more than the crack depth. The validated finite element model applies newly developed damage indicators to predict and explain the liquid metal embrittlement cracking onset and development as well as even ductile failure.
Hydrogen has great potential on the path towards decarbonization of the energy and transport sectors and can mitigate the urgent issue of global warming. It can be sustainably produced through water electrolysis with potentially zero emissions, and efficiently used (e.g., in fuel cell systems). Despite its environmental advantages, hydrogen-metal interactions could result in the degradation of the mechanical properties of several structural materials. In order to determine the magnitude of the material degradation in relation to hydrogen exposure, extensive material testing is required. The standardized procedure for in-situ testing for the quantification of the impact of compressed gaseous hydrogen (CGH2) relies on the utilization of an autoclave around the tested specimen. Such test set-up is complex, expensive, time-consuming and requires special equipment, trained personnel, and strict safety procedures. A relatively recent method to circumvent these issues and provide affordable results consists of using hollow specimens, thus applying the hydrogen pressure inside rather than outside the specimen. It allows to reduce the volume of hydrogen by several orders of magnitude and to perform the tests more efficiently and in a safer manner. This study focuses on evaluating the tensile properties of X65 vintage pipeline steel tested in a high-pressure hydrogen environment using hollow specimens. Tests are performed in 6 MPa H2 and Ar at the nominal strain rate of 10−6 s−1 to evaluate the reduced area at fracture and the elongation loss. The effect of surface finishing on crack initiation and propagation is investigated by comparing two different manufacturing techniques. In this way, this study provides insights into the applicability of a novel, reliable, and safe testing method which can be used to assess the hydrogen-assisted ductility loss in metallic materials.
The processes of hydrogen reduction of silicon and germanium chlorides under the conditions of high-frequency (40.68 MHz) counteracted arc discharge stabilized between two rod electrodes are investigated. The main gas-phase and solid products of plasma-chemical transformations are determined. Thermodynamic analysis of SiCl4 + H2 and GeCl4 + H2 systems for optimal process parameters was carried out. Using the example of hydrogen reduction of SiCl4 by the method of numerical modeling, gas-dynamic and thermal processes for this type of discharge are investigated. The impurity composition of gas-phase and solid reaction products is investigated. The possibility of single-stage production of high-purity Si and Ge mainly in the form of compact ingots, as well as high-purity chlorosilanes and trichlorogermane, is shown.
Luminescence lifetimes are an attractive analytical method for detection due to its high sensitivity and stability. Iridium probes exhibit luminescence with long excited-state lifetimes, which are sensitive to the local environment. Perfluorooctanoic acid (PFOA) is listed as a chemical of high concern regarding its toxicity and is classified as a “forever chemical”. In addition to strict limits on the presence of PFOA in drinking water, environmental contamination from industrial effluent or chemical spills requires rapid, simple, accurate, and cost-effective analysis in order to aid containment. Herein, we report the fabrication and function of a novel and facile luminescence sensor for PFOA based on iridium modified on gold surfaces. These surfaces were modified with lipophilic iridium complexes bearing alkyl chains, namely, IrC6 and IrC12, and Zonyl-FSA surfactant. Upon addition of PFOA, the modified surfaces IrC6-FSA@Au and IrC12-FSA @Au show the largest change in the red luminescence signal with changes in the luminescence lifetime that allow monitoring of PFOA concentrations in aqueous solutions. The platform was tested for the measurement of PFOA in aqueous samples spiked with known concentrations of PFOA and demonstrated the capacity to determine PFOA at concentrations >100 μg/L (240 nM).
The European Commission has recently announced two guiding principles for EU product policy: First, product policy shall ensure that the performance of front-runner products in terms of sustainability becomes the norm, and second, the effectiveness of the current Ecodesign legislative framework is going to be significantly improved. Within this paper, already existing front-runner approaches and recent and ongoing product policy-making processes were reviewed. Based on the results, an EU front-runner approach is outlined. The presented approach (i) refers to performance levels of the best products already available on the market, (ii) aggregates information in existing databases, and (iii) works semi-automated. Together, all three attributes have a high potential to facilitate and accelerate the specification of appropriate minimum requirements for products at the EU level. This way, EU policymakers can deliver on the core objectives of the Ecodesign legislative framework much better. The basic mechanism and its legal entrenchment of the approach are illustrated for the energy efficiency of energy-related products. In addition, the Front-Runner Approach can be applied to any product group in the scope of the upcoming Ecodesign for Sustainable Products Regulation and to a wide range of product-related minimum requirements, such as durability, reparability, or recycled content. The study’s objective is to suggest a tailor-made and dynamic approach to keep the EU product legislation up to date using innovative technology based on the investigation of current regulations and identify the gap. Experiences from three international case studies suggest that a front-runner approach to setting energy-performance standards can drive innovation and reduce energy consumption via promoting energy-efficient products; transparency about available products is one of the key factors and can be established by a database. The EU front-runner approach comprises extending the existing energy label database (or making use of the digital product passport) and introducing a legislative procedure that triggers changes in the energy efficiency requirements in the specific EU regulations if the database shows that a certain threshold value is reached. Challenges such as limited EU staff capacities and opportunities such as increased dynamic are discussed.
A poly(L-lactide) with a trifluoroethyl ester end group and an average degree of polymerization (DP) of 50 was synthesized by ROP of L-lactide initiated with trifluoroethanol. Small-angle X-ray scattering (SAXS) in combination with differential scanning calorimetry (DSC) measurements revealed an average crystal thickness of 13 nm, corresponding to 45 repeat units. This suggests that most crystallites were formed by extended PLA chains, and both flat surfaces were covered by CF3 groups. The crystalline PLAs were annealed at 140 or 160 °C in the presence of two catalysts: tin(II) 2-ethylhexanoate, (SnOct2) or dibutyltin bis(pentafluorophenoxide) (BuSnPhF). The chemical reactions, such as polycondensation and cyclization, proceeded in the solid state and were monitored by matrix-assisted laser desorption/ionization time-offlight (MALDI TOF) mass spectrometry and gel permeation chromatography (GPC) measurements. Under optimal conditions a large fraction of linear chains was transformed into crystallites composed of extended cycles. Additionally, MALDI TOF MS analysis of GPC fractions from samples annealed for 28 or 42 days detected chain elongation of the linear species up to a factor of 20.
The cleaning of aged silk fibers poses a common challenge in the conservation of textiles, since traditional cleaning techniques often yield unsatisfactory results or even harm objects. In this regard, cleaning objects with laser radiation is a promising addition to the range of available methods. Due to it being contactless, even brittle and touch-sensitive objects with disfiguring or harmful soiling could potentially be cleaned and therefore made accessible for research and presentation. Examples of treatment have sometimes shown spectacular results. Still there is some skepticism concerning the safety of this treatment for textile materials, which has been strengthened through previous 532 nm wavelength nanosecond laser cleaning studies on silk fibers. Taking these published results into account, the range of examined laser parameters has been extended in this study, from 532 nm nanosecond laser to 1064 nm nanosecond and even 800 nm femtosecond laser, reevaluating the effect of this treatment on the fibers. The physicochemical processes taking place on the silk fibers when cleaning with lasers are complex and still not fully understood. The aim of this project was therefore to bring more clarification about potential effects of those processes on the condition of silk samples treated with a set of different parameters for wavelength, pulse duration, energy density and number of pulses per spot. It also looks at the influence of the presence of soiling on the results. The analysis of potential effects was then carried out using statistical methods and advanced analytics. Scanning electron microscopy, Fourier-transform infrared spectroscopy and colorimetry technology provided the required insights to better assess the effects. Results show that laser cleaning of silk fibers, like most other conventional cleaning techniques, is not completely without risk, but knowing what the possible effects are helps making decisions on whether the benefits of the technique used justify these risks.
Acceleration sensors are vital for assessing engineering structures by measuring properties like natural frequencies. In practice, engineering structures often have low natural frequencies and face harsh environmental conditions. Understanding sensor behavior on such structures is crucial for reliable masurements. The research focus is on understanding the behavior of acceleration sensors in harsh environmental conditions within the low-frequency acceleration range. The main question is how to distinguish sensor behavior from structural influences to minimize errors in assessing engineering structure conditions. To investigate this, the sensors are tested using a long-stroke calibration unit under varying temperature and humidity conditions. Additionally, a mini-monitoring system configured with four IEPE sensors is applied to a small-scale support structure within a climate chamber. For the evaluation, a signal-energy approach is employed to distinguish sensor behavior from structural behavior. The findings show that IEPE sensors display temperature-dependent nonlinear transmission behavior within the low-frequency acceleration range, with humidity having negligible impact. To ensure accurate engineering structure assessment, it is crucial to separate sensor behavior from structural influences using signal energy in the time domain. This study underscores the need to compensate for systematic effects, preventing the underestimation of vibration energy at low temperatures and overestimation at higher temperatures when using IEPE sensors for engineering structure monitoring.
Here, we show that calcium sulfate dihydrate (gypsum) can be directly, rapidly and reversibly converted to calcium sulfate hemihydrate (bassanite) in high salinity solutions (brines). The optimum conditions for the efficient production of bassanite in a short time (<5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the better-known behaviour of the bassanite phase in low-salt environments. In low-salinity aqueous solutions, bassanite is considered to be metastable with respect to gypsum and anhydrite, and therefore gypsum-to-bassanite conversion does not occur in pure water. Interestingly, the high-salinity transformation of gypsum-to-bassanite has been reported by many authors and used in practice for several decades, although its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures was inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline phase for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Reliable measurement of the size of polydisperse, complex-shaped commercial nanopowders is a difficult but necessary task, e.g., for regulatory requirements and toxicity risk assessment. Suitable methods exist for the accurate characterization of the size of non-aggregated, stabilized, spherical and monodisperse nanoparticles. In contrast, industrial nanoscale powders usually require dedicated sample preparation procedures developed for the analysis method of choice. These nano-powders tend to agglomerate and/or aggregate, a behavior which in combination with an innate broad particle size distribution and irregular shape often significantly alters the achievable accuracy of the measured size parameters. The present study systematically tests two commercially available nanoscale powders using different sample preparation methods for correlative analysis by scanning electron microscopy, dynamic light scattering, Brunauer–Emmet–Teller method and differential mobility analysis. One focus was set on the sample preparation by embedding nanoparticles in carbon-based hot-mounting resin. Literature on this topic is scarce and the accuracy of the data extracted from cross sections of these particles is unclearly stated. In this paper systematic simulations on the deviation of the size parameters of well-defined series of nanoparticles with different shapes from the nominal value were carried out and the contributing factors are discussed.
The global trend towards decarbonization and the demand for energy security have put hydrogen energy into the spotlight of industry, politics, and societies. Numerous governments worldwide are adopting policies and strategies to facilitate the transition towards hydrogen-based economies. To assess the determinants of such transition, this study presents a comparative analysis of the technological innovation systems (TISs) for hydrogen technologies in Germany and South Korea, both recognized as global frontrunners in advancing and implementing hydrogen-based solutions. By providing a multidimensional assessment of pathways to the hydrogen economy, our analysis introduces two novel and crucial elements to the TIS analysis: (i) We integrate the concept of ‘quality infrastructure’ given the relevance of safety and quality assurance for technology adoption and social acceptance, and (ii) we emphasize the social perspective within the hydrogen TIS. To this end, we conducted 24 semi-structured expert interviews, applying qualitative open coding to analyze the data. Our results indicate that the hydrogen TISs in both countries have undergone significant developments across various dimensions. However, several barriers still hinder the further realization of a hydrogen economy. Based on our findings, we propose policy implications that can facilitate informed policy decisions for a successful hydrogen transition.
Simulation-Assisted Augmentation of Missing Wedge and Region-of-Interest Computed Tomography Data
(2024)
This study reports a strategy to use sophisticated, realistic X-ray Computed Tomography (CT) simulations to reduce Missing Wedge (MW) and Region-of-Interest (RoI) artifacts in FBP (Filtered Back-Projection) reconstructions. A 3D model of the object is used to simulate the projections that include the missing information inside the MW and outside the RoI. Such information augments the experimental projections, thereby drastically improving the reconstruction results. An X-ray CT dataset of a selected object is modified to mimic various degrees of RoI and MW problems. The results are evaluated in comparison to a standard FBP reconstruction of the complete dataset. In all cases, the reconstruction quality is significantly improved. Small inclusions present in the scanned object are better localized and quantified. The proposed method has the potential to improve the results of any CT reconstruction algorithm.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.
This study investigates the mechanochemical reactions between AgBr 3-picolylamine and 4-picolylamine. The use of different stoichiometry ratios of the reagents allows [(AgBr)(n-pica)]n and [(AgBr)2(n-pica)]n to be obtained, and we report the new structures of [(AgBr)2(3-pica)]n and [(AgBr)2(4-pica)]n which are characterized by the presence of the following: (a) infinite inorganic chains, (b) silver atom coordinated only by bromide atoms and (c) argentophilic interactions. Furthermore, we studied the interconversion of [(AgBr)(n-pica)]n/[(AgBr)2(n-pica)]n by mechanochemical and thermal properties. The in situ experiments suggest that [(AgBr)(3-pica)]n is kinetically favoured while [(AgBr)2(3-pica)]n is converted into [(AgBr)(3-pica)]n only with a high excess of the ligand. Finally, the liquid nature of the ligands is not sufficient to assist the grinding process, and the complete reaction is observed with the addition of a small quantity of acetonitrile.
Acetogenic bacteria produce CO2-based chemicals in aqueous media by hydrogenotrophic conversion of CO2, but CO is the preferred carbon and electron source. Consequently, coupling CO2 electrolysis with bacterial fermentation within an integrated bio-electrocatalytical system (BES) is promising, if CO2 reduction catalysts are available for the generation of CO in the complex biotic electrolyte. A standard stirred-tank bioreactor was coupled to a zero-gap PEM electrolysis cell for CO2 conversion, allowing voltage control and separation of the anode in one single cell. The cathodic CO2 reduction and the competing hydrogen evolution enabled in-situ feeding of C. ragsdalei with CO and H2. Proof-of-concept was demonstrated in first batch processes with continuous CO2 gassing, as autotrophic growth and acetate formation was observed in the stirred BES in a voltage range of −2.4 to −3.0 V. The setup is suitable also for other bioelectrocatalytic reactions. Increased currents and lower overvoltages are however required. Atomically-dispersed M−N−C catalysts show promise, if degradation throughout autoclaving can be omitted. The development of selective and autoclavable catalysts resistant to contamination and electrode design for the complex electrolyte will enable efficient bioelectrocatalytic power-to-X systems based on the introduced BES.
The ISO 3690 standard “Determination of hydrogen content in arc weld metal” requires a thermal activation of the diffusible hydrogen in a piece of weld metal for the subsequent ex situ concentration measurement by carrier gas hot extraction CGHE or thermal desorption spectroscopy (TCD). Laser-induced breakdown spectroscopy (LIBS) offers a time and spatially resolved, almost non-destructive, in situ measurement of hydrogen at surfaces without sample preparation. We measured hydrogen in steels, which were charged either electrochemically or by high-pressure hydrogen gas, and compared the results. Further, the feasibility of quantitative hydrogen line scan measurements with LIBS was demonstrated by measuring hydrogen at water jet cut surfaces. The hydrogen concentrations measured with the help of LIBS were compared with CGHE measurements. It was observed that hydrogen can be reliably measured with LIBS for concentrations larger than 2 wt.-ppm. The maximum hydrogen concentration achieved using electrochemical charging was 85.1 ppm. The results show that LIBS is a promising technique for time- and spatially resolved measurements of hydrogen in steels.
The usefulness of seven different Tin catalysts, Bismuth subsalicylate and Titan tetra(ethoxide) for the polycondensation of ethyl L-lactate (ELA) was examined at 150 °C/6 d. Dibutyltin bis(phenoxides) proved to be particularly effective. Despite the low reactivity of ELA, weight average molecular masses (Mw) up to 12 500 were found along with partial crystallization. Furthermore, polylactides (PLAs) of similar molecular masses were prepared via ELA-initiated ROPs of L-lactide by means of the four most effective polycondensation catalysts. The crystalline linear PLAs were annealed at 140 or 160 °C in the presence of these catalysts. The consequences of the transesterification reactions in the solid PLAs were studied by means of matrix-assisted laser desorption/ionization (MALDI TOF) mass spectrometry, gel permeation chromatography (GPC) and small-angle X-ray scattering (SAXS). The results indicate that polycondensation and formation of cycles proceed in the solid state via formation of loops on the surface of the crystallites. In summary, five different transesterification reactions are required to explain all results.
Knowledge representation in the Materials Science and Engineering (MSE) domain is a vast and multi-faceted challenge: Overlap, ambiguity, and inconsistency in terminology are common. Invariant (consistent) and variant (context-specific) knowledge are difficult to align cross-domain. Generic top-level semantic terminology often is too abstract, while MSE domain terminology often is too specific. In this paper, an approach how to maintain a comprehensive MSE-centric terminology composing a mid-level ontology–the Platform MaterialDigital Core Ontology (PMDco)–via MSE community-based curation procedures is presented. The illustrated findings show how the PMDco bridges semantic gaps between high-level, MSE-specific, and other science domain semantics. Additionally, it demonstrates how the PMDco lowers development and integration thresholds. Moreover, the research highlights how to fuel it with real-world data sources ranging from manually conducted experiments and simulations with continuously automated industrial applications.
Understanding the susceptibility to spalling of concrete members in case of fire is important to evaluate the residual load-bearing capacity. The investigations of the spalling phenomenon of a concrete mixture using real scale members are necessary but expensive to carry out. Reducing the specimen size leads to an increase of boundary effects that can result in a reduced spalling or absence of spalling. In this study, fire tests were carried out on unrestrained, single-sided exposed, cuboid shaped specimens (0.6 m x 0.6 m x 0.29 m) as well as unrestrained and steel ring restrained cylindrical specimens (Ø = 0.47 m, h = 0.29 m), which induce different boundary conditions. These fire tests were carried out on two ordinary concrete mixtures. The two mixtures differ only in the type of aggregates (quartz gravel and basalt grit) and were used to investigate the influence of the thermal expansion of the aggregate on the spalling behaviour of the concrete. The results show a significant increase of
the spalling depth due to the restrained thermal expansion achieved by the applied steel rings. Additionally, the type of aggregate has a direct influence on the spalling behaviour of a concrete mixture. The reduction of the boundary effects by the steel rings recreate the test conditions in the centre of a large concrete member. Thus, this type of specimen is suitable to determine the susceptibility to spalling of a material (screening-tests) as preliminary investigations to full scale fire tests.
A route to a ZrF4 catalyst active in room temperature Friedel–Crafts and dehydrofluorination reactions was developed via a fluorolytic sol–gel route, which was followed by a postfluorination step using a stream of CHClF2. The behaviour of different Zr(IV) precursors in a sol–gel reaction with anhydrous isopropanol/HF solution was investigated. The subsequent post-fluorination step was optimised in its temperature ramp and confirmed the necessity of a fluorination of the generated xerogels to obtain catalytic activity. The process is discussed in the context of the analysis of the materials using Brunauer–Emmett–Teller analysis (BET), powder X-ray diffraction (XRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The local structure of the amorphous catalyst was elucidated by extended X-ray absorption fine structure spectroscopy (EXAFS).
High-strength steels offer potential for weight optimization due to reduced wall thicknesses in modern constructions. Additive manufacturing processes such as Wire Arc Additive Manufacturing (WAAM) enable the resource-efficient production of structures. In the case of defects occurring in weld seams orWAAM components due to unstable process conditions, the economical solution is local gouging or machining and repair welding. It is important to understand the effects of machining steps on the multiaxial stress state in conjunction with the design-related shrinkage restraints. Research into how welding and slot milling of welds andWAAM structures affects residual stresses is still lacking. For this reason, component-related investigations with high-strength steels with yield strengths ≥790 MPa are carried out in our research. In-situ digital image correlation (DIC) and ex-situ X-ray diffraction (XRD) were used to analyze the stresses and strains induced on specimens during and after milling. The systematic analyses revealed a significant interaction of the stiffness and microstructure of the specimens with the initial residual stresses induced by welding. Subsequent repair welds can result in significantly higher residual stresses.
We present Jobflow, a domain-agnostic Python package for writing computational workflows tailored for high-throughput computing applications. With its simple decorator-based approach, functions and class methods can be transformed into compute jobs that can be stitched together into complex workflows. Jobflow fully supports dynamic workflows where the full acyclic graph of compute jobs is not known until runtime, such as compute jobs that launch
other jobs based on the results of previous steps in the workflow. The results of all Jobflow compute jobs can be easily stored in a variety of filesystem- and cloud-based databases without the data storage process being part of the underlying workflow logic itself. Jobflow has been intentionally designed to be fully independent of the choice of workflow manager used to dispatch the calculations on remote computing resources. At the time of writing, Jobflow
workflows can be executed either locally or across distributed compute environments via an adapter to the FireWorks package, and Jobflow fully supports the integration of additional workflow execution adapters in the future.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
Irradiation assisted stress corrosion cracking (IASCC) is a form of intergranular stress corrosion cracking that occurs in irradiated austenitic alloys. It requires an irradiated microstructure along with high temperature water and stress. The process is ubiquitous in that it occurs in a wide range of austenitic alloys and water chemistries, but only when the alloy is irradiated. Despite evidence of this degradation mode that dates back to the 1960s, the mechanism by which it occurs has remained elusive. Here, using high resolution electron backscattering detection to analyze local stress-strain states, high resolution transmission electron microscopy to identify grain boundary phases at crack tips, and decoupling the roles of stress and grain boundary oxidation, we are able to unfold the complexities of the phenomenon to reveal the mechanism by which IASCC occurs. The significance of the findings impacts the mechanical integrity of core components of both current and advanced nuclear reactor designs worldwide.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.