Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (192) (entfernen)
Sprache
- Englisch (186)
- Deutsch (5)
- Portugiesisch (1)
Schlagworte
- Concrete (15)
- Corrosion (14)
- Alkali-activated materials (13)
- Flame retardant (9)
- Cement (6)
- Durability (5)
- Additive manufacturing (4)
- Carbon steel (4)
- Cone calorimeter (4)
- Fatigue (4)
- Flame retardancy (4)
- Mechanical properties (4)
- Phosphorus (4)
- Rheology (4)
- Rubber (4)
- Structural health monitoring (4)
- Acid resistance (3)
- Compressive strength (3)
- Corrosion testing (3)
- DFG SPP 2005 (3)
- Fire protection (3)
- Fire resistance (3)
- Fire test (3)
- Graphene (3)
- Ground vibration (3)
- High-density polyethylene (3)
- Hyperbranched (3)
- Impurities (3)
- Lithium-ion battery (3)
- Model updating (3)
- Proper generalized decomposition (3)
- Spalling (3)
- Thermal runaway (3)
- Value of information (3)
- Accelerated testing (2)
- Alkali silica reaction (2)
- Aluminium (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Baustoffrecycling (2)
- Bridge (2)
- Building and Construction (2)
- Bus interior materials (2)
- CCUS (2)
- Calcined clay (2)
- Carbon fibers (2)
- Carbonation (2)
- Cement matrix (2)
- Characterization (2)
- Civil and Structural Engineering (2)
- Corrosion resistance (2)
- Crop protection products (2)
- Depletion force (2)
- Dripping (2)
- EPDM (2)
- Electrochemical methods (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FTIR (2)
- Fire behaviour (2)
- Fire statistics (2)
- Flame retardants (2)
- Flammability (2)
- Full notch creep test (FNCT) (2)
- Gel electrolytes (2)
- Geothermal (2)
- High-performance concrete (2)
- Human behaviour (2)
- Impact simulation (2)
- Intumescent coating (2)
- Isogeometric analysis (2)
- Laser scanning microscopy (LSM) (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leichte Gesteinskörnungen (2)
- Luminescence (2)
- MIC (2)
- Mauerwerkbruch (2)
- Microstructure (2)
- Moisture transport (2)
- Monitoring (2)
- Nanocomposite (2)
- Nanocomposites (2)
- PFEM (2)
- Polymers of Intrinsic Microporosity (2)
- Polyurethane (2)
- Portland cement (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Reliability (2)
- Rice husk ash (2)
- SHM (2)
- Smoke gas emission (2)
- Sr isotopes (2)
- Structural Health Monitoring (2)
- Structural sealant glazing (2)
- Synergy (2)
- Synthesis (2)
- System identification (2)
- Thermal treatment (2)
- Thermoplastic polyurethane (2)
- Train-induced ground vibration (2)
- UL 94 (2)
- Verkehrsinfrastukturen (2)
- Weathering (2)
- 3-dimensional microscopy (1)
- 3DCP (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- AFm phase (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Acetylation (1)
- Acid attack (1)
- Acoustic emission (1)
- Acoustic emission monitoring (1)
- Adaptive importance sampling (1)
- Adhesives (1)
- Agar (1)
- Ageing (1)
- Aging (1)
- Agricultural by-product (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- Alkali aggregate reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali–silica reaction (1)
- Aluminium hydroxide (1)
- Aluminum trihydroxide (ATH) (1)
- Analytical methods (1)
- Angle of repose (1)
- Anode (1)
- Aquifer fluid (1)
- Architecture (1)
- Aromatic (1)
- Artificial ageing (1)
- Asymptotic local approach (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Austenitic stainless steel (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated expansion measurement (1)
- Automated operational modal analysis (1)
- Axle sequence (1)
- Bacterial attachment (1)
- Bauwerksüberwachung (1)
- Bayesian Inference (1)
- Bayesian updating of stress ranges (1)
- Behmite (1)
- Belastungstest (1)
- Bench-scale fire resistance (1)
- Bending (1)
- Beton (1)
- Binary zinc alloys (1)
- Bingham fluid (1)
- Bio-based concrete (1)
- Biocomposites (1)
- Biodegradable (1)
- Biofilm (1)
- Biomaterials (1)
- Bioreceptivity (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bituminous binders (1)
- Blade (1)
- Blended cement (1)
- Boehmite (1)
- Boson peak (1)
- Boundary element (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Building response (1)
- Building with earth (1)
- Burning behavior (1)
- Burning behaviour (1)
- CCS (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- Cables (1)
- Calorimetry (1)
- Carbon (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbonation behaviour (1)
- Casing (1)
- Cathode active material (1)
- Cement hydration (1)
- Cement paste (1)
- Cement suspension (1)
- Ceramics (1)
- Charge density (1)
- Charring (1)
- Chemical admixtures (1)
- Chemical synthesis (1)
- Chemisorption (1)
- Chloride (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Coating (1)
- Combined finite-element boundary-element method (1)
- Components of excitation (1)
- Composite material (1)
- Composites (1)
- Composites in fire (1)
- Compressed earth (1)
- Compression tests (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete beam (1)
- Concrete printing (1)
- Concrete repair (1)
- Condensate (1)
- Condensed Matter Physics (1)
- Condensed matter physics (1)
- Cone claorimeter (1)
- Consequences (1)
- Construction and demolition waste (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Covalent Organic frameworks (1)
- Crack (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Critical chloride content (1)
- Crosslinking (1)
- Crystalline admixture (1)
- Crystalline phase identification (1)
- Cyclic weathering (1)
- DGEBA (1)
- DIN tube furnace (1)
- DMDHEU (1)
- DOPO (1)
- Damage Identification (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection (1)
- Damage detection systems (1)
- Damage evolution (1)
- Data infrastructures (1)
- Datenfusion (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Degradation (1)
- Dehydration (1)
- Demolition wastes (1)
- Dendritic (1)
- Denkmalpflege (1)
- Design of experiment (1)
- Destructive testing (1)
- Detection (1)
- Deteriorating structures (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dissolution (1)
- Distributed fiber optic sensing (1)
- Distributed fibre optic sensor (1)
- Domain decomposition methods (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Durability assessment (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic excitation (1)
- Dynamic loads (1)
- EPR (1)
- EVA (1)
- Earth block masonry (1)
- Earth material (1)
- Egress (1)
- Elastomers (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Elevated temperature (1)
- Engineering data (1)
- Engineering egress data (1)
- Environmental Chemistry (1)
- Environmental and Operational Variability (1)
- Environmental influence (1)
- Epoxies (1)
- Erosion (1)
- Estimation (1)
- Ethylene-vinyl acetate (1)
- European project (1)
- Evacuation (1)
- Excitation forces (1)
- Explosion limit (1)
- FAIR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Facade (1)
- Fatigue damage (1)
- Fatigue strength (1)
- Fiber optic sensor (1)
- Fibre bragg grating (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite elements (1)
- Fire (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Flame Retardancy (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible wheelset (1)
- Flow properties (1)
- Flowability (1)
- Flue gas desulfurization gypsum (1)
- Foam (1)
- Foams (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Frost salt attack (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Furniture (1)
- Future‑oriented standards (1)
- GPU Parallel computing (1)
- Gas analysis (1)
- Gas emission (1)
- Gas explosion (1)
- Gel-bound Colorants (1)
- General Materials Science (1)
- Geometric vehicle and track irregularities (1)
- Geopolymers (1)
- Gips (1)
- Glass fiber-reinforced composites (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Green facades (1)
- Green urban construction (1)
- Grinding (1)
- Halogen-free (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner ratio (1)
- Heat of combustion (1)
- Heat release (1)
- Heat transfer (1)
- Heat treatment (1)
- Heavy metal removal (1)
- Heterogeneity (1)
- High density polyethylene (1)
- High heat resistance (1)
- High throughput screening (1)
- High-rise building (1)
- High‐nitrogen steel (1)
- Horizontal wind turbine (1)
- Hot storage (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hydration (1)
- Hydration stoppage (1)
- Hydrogarnet (1)
- Hydrogen (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- IEPE (1)
- ISO 9223 (1)
- Icing conditions (1)
- Identification and quantification of additives (1)
- Ignition (1)
- Illite (1)
- In-situ ED-XRD (1)
- In-situ testing (1)
- Inclination angle (1)
- Industrial by-products (1)
- Infra-lightweight concrete (1)
- Infraleichtbeton (1)
- Interlaboratory test (1)
- Intumescent additives (1)
- Ionic stregth (1)
- Kaolinite (1)
- Knowledge graphs (1)
- Korrosion (1)
- LBM-DEM (1)
- LIBS (1)
- Laminate design (1)
- Laminates (1)
- Large components (1)
- Large-scale tests (1)
- Laser-induced slip casting (1)
- Lateral dynamic displacement (1)
- Leather (1)
- Leather waste (1)
- Leichtgranulate (1)
- LiFePO4 (1)
- Lightweight aggregates (1)
- Limestone powder (1)
- Linear elastic fracture mechanics (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load identification (1)
- Load tests (1)
- Local approaches (1)
- Localized model order reduction (1)
- Low-carbon construction (1)
- Low-frequency shaker (1)
- Lunar regolith (1)
- MCC (1)
- Magnesium chloride brine (1)
- Magnesium hydroxide (1)
- Mapping for unseparable load (1)
- Martensitic steels (1)
- Maschinelles Lernen (1)
- Maschinenfundament (1)
- Mass loss (1)
- Material moisture (1)
- Materials (1)
- Materials Chemistry (1)
- Materials informatics (1)
- Measurement campaigns (1)
- Mechanical Engineering (1)
- Mechanical loading (1)
- Mechanical strength (1)
- Mechanics of Materials (1)
- Mechanistic study (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Metals and Alloys (1)
- Metathesis (1)
- Methyl group rotation (1)
- Micro-CT scanning (1)
- Microbially induced corrosion (1)
- Micromechanical modelling (1)
- Microplastic (1)
- Microscopy (1)
- Middle Pleistocene (1)
- Mitigation (1)
- Mitigation strategies (1)
- Mix-design (1)
- Model Building (1)
- Model Updating (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modern (1)
- Modes of action (1)
- Moisture content (1)
- Molecular mass distribution (1)
- Monitoring strategy (1)
- Monopile support structure (1)
- Mortar method (1)
- Movement characteristics (1)
- Multi-beam track model (1)
- Multilayer graphene (1)
- Multiscale methods (1)
- Multivariate evaluation (1)
- Nanoparticles (1)
- Natural rubber (1)
- Nelson’s method (1)
- Network (1)
- Neutron Scattering (1)
- Neutron scattering (1)
- Nitric acid (1)
- Non-destructive testing (1)
- Nondestructive testing (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Numerische Analysen (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Ontologies (1)
- Operational modal analysis (1)
- Optical backscatter reflectometry (1)
- Optical criterion of brittleness (1)
- Organophosphonate (1)
- Orthotropic steel deck (1)
- Oxyfuel (1)
- PCE (1)
- PLA (1)
- PVD hard coating (1)
- Packaging (1)
- Particle-bed binder jetting (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Permeation measurements (1)
- Phase development (1)
- Phospha-Michael addition (1)
- Phosphine oxide (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Phosphorylated Algae (1)
- Phosphorylated lignin (1)
- Physisoprtion (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polyethylene (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer of intrisic microporosity (1)
- Polymers (1)
- Polyolefins (1)
- Polyphosphoester (1)
- Polysaccharides (1)
- Polyurethane foams (1)
- Pore pressure (1)
- Pore structure (1)
- Porosity (1)
- Porous media (1)
- Portland clinker (1)
- Post-fire testing (1)
- Posterior fatigue reliability (1)
- Potassium ions (1)
- Powders (1)
- Prepregs (1)
- Pressure-sensitive adhesive (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Preventive strategies (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Probability of failure (1)
- Process upscaling (1)
- Proof loading (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Protective coatings (1)
- Provenance (1)
- Provenancing (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Quality (1)
- Quantitative moisture measurement (1)
- Railway induced vibration (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Rapid gas decompression (1)
- Reactive fire protection system (1)
- Real scale test (1)
- Recommendations (1)
- Recovery (1)
- Recyclable (1)
- Recycled materials (1)
- Recycling (1)
- Reduced order models (1)
- Reference values (1)
- Referenzbeispiel (1)
- Regulation (1)
- Reinforced concrete (1)
- Reinforcement corrosion (1)
- Relative humidity (1)
- Remote sensing vibrometer (1)
- Renewable energy (1)
- Reproducibility (1)
- Resonance (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Rhenanite (1)
- Rheometry (1)
- Rigid (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Risk (1)
- Risk assessment (1)
- Road pavement (1)
- Room fire (1)
- Rregulations (1)
- Rubber sealing (1)
- Safety (1)
- Sample piece size (1)
- Scattering (1)
- Schnellladung (1)
- Scientific workflows (1)
- Screening test (1)
- Sealing structures (1)
- Self-healing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sift-proofness (1)
- Silica (1)
- Silicone elastomer (1)
- Simulation (1)
- Sintering (1)
- Size effect (1)
- Slag (1)
- Slow crack growth (SCG) (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil (1)
- Soil properties (1)
- Sol-gel (1)
- Solid-state NMR (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Spectral elements (1)
- Stainless steel (1)
- Static axle loads (1)
- Statistical pattern recognition (1)
- Steel (1)
- Steel construction (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steinergänzungsmassen (1)
- Stereophotogrammetry (1)
- Stiffness variation (1)
- Stone Age (1)
- Strain (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress corrosion tests (1)
- Stress intensity factor (1)
- Stress stiffening (1)
- Stress-strain relation (1)
- Structural health monitoring (SHM) (1)
- Structural reliability (1)
- Structural system identification (1)
- Strukturmonitoring (1)
- Strätlingite (1)
- Sulfate attack (1)
- Sulfide (1)
- Sulfur containing polymers (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Surface conditions (1)
- Surface interactions (1)
- Surfaces, Coatings and Films (1)
- Sustainability (1)
- Sustainability and the environment (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- Synergism (1)
- TED-GC/MS (1)
- TGA-FTIR (1)
- TGA-MS (1)
- Tannery industry (1)
- Tapes (1)
- Temperature effect (1)
- Tension members (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Testing (1)
- Testing methods (1)
- Testing procedure (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thermal Analysis (1)
- Thermal Gravimetric Analysis (1)
- Thermal analysis (1)
- Thermal transient problem (1)
- Thermally treated sludge (1)
- Thermodynamic modelling (1)
- Throwing-stick (1)
- Titanium nitride (1)
- Tobermorite (1)
- Tool comparison (1)
- Toxicity (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Train passage (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrasonic testing (1)
- Ultrasound gel (1)
- Uncertainty Quantification (1)
- Utility and decision theory (1)
- Value of action analysis (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Vitrimer (1)
- Vocabulary providers (1)
- Vulcanization (1)
- Waste management (1)
- Waste streams (1)
- Wastewater flame retardants (1)
- Water transport (1)
- Wave propagation (1)
- Wavenumber integrals (1)
- Waxes (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Wellenausbreitung (1)
- Wheelset accelerations (1)
- Whole-chain CCS scenario (1)
- Wildfire (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine tower (1)
- Wire arc additive manufacturing (1)
- Wire break (1)
- Wood (1)
- Wood modification (1)
- Workflow management (1)
- Working life (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- Xpoxy resin (1)
- Yield stress (1)
- ZfP (1)
- Zinc (1)
- Zinc coatings (1)
- Zink phytate (1)
- Znc (1)
- layered soil (1)
- magnesium (1)
- melamine (1)
- mortar method (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- spectral elements (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (192) (entfernen)
Paper des Monats
- ja (18)
The use of calcined clays as supplementary cementitious materials (SCMs) has been identified as a viable option to decrease the CO2 emissions related to cement production. However, while extensive data is available about kaolinitic clays in this context, other clays such as illitic clays appear to be under-studied. Therefore, in the present study, two illitic clays were compared to two low-grade kaolinitic clays in terms of transformations in the calcination temperature range 650–900 °C, and performance of the calcined clays in blended cement pastes as measured by strength evolution, heat release, hydrated phase formation and portlandite consumption. The illitic clays required a higher calcination temperature for complete dehydroxylation of their illite than what is necessary for dehydroxylation of kaolinite. These higher calcination temperatures also led to particle sintering, significantly decreasing the specific surface area of the illitic clays, particularly for the clay with the higher Fe2O3 content. Nevertheless, while the kaolinitic clays generally exhibited the best performance as SCM, the illitic clay with lower Fe2O3 content performed similar to the kaolinitic clays when calcined at optimum temperature and applied at a moderate substitution rate. These findings demonstrate that several different clays have the potential to be used as SCM and indicate possible routes to identify suitable deposits for this purpose.
There is an ongoing debate on European scale concerning the criticality of phosphorus. In Switzerland and Germany, phosphorus recovery from phosphorus-rich waste streams will become obligatory. Sewage sludge ash is rich in phosphorus and may become an important secondary feedstock. Thermochemical treatment of sewage sludge ash with sodium sulphate under reducing conditions was shown to remove heavy metals from the solid product and produce the fully plant available crystalline phase CaNaPO4. Pilot-scale experiments in a rotary kiln were carried out at temperatures between 750 and 1000 °C and were compared to laboratory-scale experiments with crucibles. Process upscaling was successfully demonstrated but a series of differences were noticed: In comparison to laboratory-scale, solubility of phosphorus in samples from pilot-scale experiments was lower at all chosen treatment temperatures because of shorter retention time and incomplete decomposition of sodium sulphate. X-ray diffraction analysis revealed remaining phase fractions of whitlockite (Ca3-x(Mg,Fe)x(PO4)2) and sodium sulphate from the starting materials in products and thus indicated incomplete reaction. In contrast to the results of laboratory-scale experiments, the crystalline phase CaNaPO4 was clearly absent in the products from the rotary kiln but instead a Mg-bearing phase (Ca,Mg)NaPO4 was formed. Laboratory-scale experiments confirmed (Ca,Mg)NaPO4 is an intermediate phase between whitlockite and CaNaPO4. However, both crystalline phases are characterized by high plant availability. It was shown that heavy metal removal increased at higher temperatures whereas solubility and thus plant availability of phosphorus already reached its maxima at temperatures of 950 °C in pilot-scale and 875 °C in laboratory-scale experiments.
Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway
(2023)
Lithium-based batteries have the potential to undergo thermal runaway (TR), during which mixtures of gases are released. The purpose of this study was to assess the explosibility of the gaseous emission from LIBs of an NMC-based cathode during thermal runaway. In the current project, a series of pouch lithium-based battery cells was exposed to abuse conditions (thermal) to study the total amount of gases released and the composition of the gas mixture. First, the battery cells were placed in a closed vessel, and the pressure and temperature rise inside the vessel were measured. In a second step, the composition of gases was analysed using a Fourier transform Infrared (FTIR) spectrometer.
We found that the amount of released gases was up to 102 ± 4 L, with a clear dependence on the battery capacity. This study showed that the concentration of gaseous emissions such as carbon monoxide (CO), methane (CH4), ethylene (C2H4), ethane (C2H6), and hydrogen cyanide (HCN) increased with higher cell capacity. Of the five studied flammable gases, the maximum concentrations of carbon monoxide (16.85 vol%), methane (7.6 vol%), and ethylene (7.86 vol%) were identified to be within their explosible range. Applying Le Chatelier’s law, a calculated lower explosion limit (LEL) of 7% in volume fraction was obtained for the gas mixture. The upper explosion limit (UEL) of the gas mixture was also found to be 31% in volume. A filter comprising pyrobubbles was used for the removal of the studied gas components released during the thermal abuse. The investigation revealed that the pyrobubbles filter was highly effect in the removal of HCN (up to 94% removal) and CO2 (up to 100% removal). Herein, we report the dependency of the method of thermal runaway trigger on the measured maximum temperature.
ISO 14837-32:2015 and DIN EN 1998-1/NA:2021 as well as prEN 1997-2:2022 allow for us-ing correlations between the results of in-situ soil penetration tests and shear wave velocity (or shear modulus) to determine soil properties to be used in dynamic analyses. While the ISO and prEN standards even provide some recommendations on specific correlations to be used, the DIN standard does not. Due to the statistical nature of such correlations their general applica-bility has to be verified. We collected data sets from test sites from Germany as well as New Zealand at which cone penetration tests (CPT) as well as seismic site investigation methods were conducted. These sites comprise sandy soils as well as clayey soils, mixed soils as well as glacial soils. We compare the results of several correlations between CPT results and shear wave velocity. The accuracy of such correlations is assessed with respect to the accuracy of seismic in-situ tests. It turns out that for clean sands such correlations between CPT and Vs have a similar order of variability as seismic in-situ tests conducted at the same site. The higher the fines portion of the soil, the higher the variability of the statistical correlations, and conse-quently the less the general applicability. For glacial soils and other special soil types usage of statistical correlations to determine dynamic soil properties is not recommended.
The susceptibility of concrete structures due to alkali–silica reaction (ASR) can be assessed by means of ASR concrete prism testing at 60 °C, according to RILEM AAR 4.1. There, expansion of concrete prisms indicates alkali-reactivity of the examined concrete mix. This work applies in situ expansion measurement to accelerated concrete prism testing. Automated measuring facilitates both storage without the usually necessary interruptions for manual measurement and acquisition of quasi-continuousexpansion data. A comparative experimental programme showed that conventional testing resulted in stronger expansion and leaching of alkalis than automated testing. Experimental simulation of interruptions, typically associated with manual measurements in conventional testing, could prove the influence of these cooling–heating cycles. Two phenomenological approaches, frequently used for describing reaction kinetics of ASR by linking it to expansion results from ASR-testing, were validated with continuous expansion data of three types of aggregate. Experimental expansion depicted s-shaped curves similar to them of the modelling approaches. However, strong swelling recorded in the beginning of the test was not covered by the model curves. Auxiliary measurement of acoustic emissions and ultrasonic velocity helped characterising mechanisms such as hydration and cracking, which also influence prism expansion. The proposed modification of the measurement procedure provides an extended basis to analyse expansion mechanisms. Regarding data for validation of ASR-expansion models, continuous expansion results are preferable to conventional test results.
A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate‐resilient energy systems and infrastructures brings with it a long‐term direction, so as a result the long‐term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
Corrosion monitoring of reinforced concrete structures:The DGZfP specification B12 Collaboration
(2023)
Corrosion monitoring of reinforced or prestressed concrete structures has becomeincreasingly important in recent years. Areas of application include componentsthat are no longer accessible after completion or where potential fieldmeasurements cannot be carried out due to existing coatings. Corrosion monitoringcan also be used to monitor the progress of corrosion in corroding systems, e.g. to prove the success of repair measures according to repair principle 8 in accordancewith EN 1504‐9 or repair method 8.3 in accordance with the DIBt repair guideline.It also could be used to prove the functionality of cathodic corrosion protectionsystems in accordance with ISO 12696. Despite the increasing importance ofcorrosion monitoring, no guidelines orrecommendations existed until 2018. Thisgap was closed by the English version of specification B12,“Corrosion Monitoringof Reinforced and Prestressed Concrete Structures,”of the German Society for Non‐Destructive Testing, which was published in 2021. This article introducesspecification B12 by explaining the basicmeasurement principles and illustratingthe potential of corrosion monitoring in new and existing buildings.
This study focuses on the corrosion mechanism of carbon steel exposed to an artificial geothermal brine influenced by carbon dioxide (CO2) gas. The tested brine simulates a geothermal source in Sibayak, Indonesia, containing 1500 mg/L of Cl-, 20 mg/L of SO4 2-, and 15 mg/L of HCO3-with pH 4. To reveal the temperature effect on the corrosion behavior of carbon steel, exposure and electrochemical tests were carried out at 70 °C and 150 °C. Surface analysis of corroded specimens showed localized corrosion at both temperatures, despite the formation of corrosion products on the surface. After 7 days at 150 °C, SEM images showed the formation of an adherent, dense, and crystalline FeCO3 layer. Whereas at 70 °C, the corrosion products consisted of chukanovite (Fe2(OH)2CO3) and siderite (FeCO3), which are less dense and less protective than that at 150 °C.
Control experiments under Ar-environment were used to investigate the corrosive effect of CO2. Free corrosion potential (Ecorr) and electrochemical impedance spectroscopy (EIS) confirm that at both temperatures, the corrosive effect of CO2 was more significant compared to that measured in the Ar-containing solution. In terms of temperature effect, carbon steel remained active at 70 °C, while at 150 °C, it became passive due to the FeCO3 formation. These results suggest that carbon steel is more susceptible to corrosion at the near ground surface of a geothermal well, whereas at a deeper well with a higher temperature, there is a possible risk of scaling (FeCO3 layer). A longer exposure test at 150 °C with a stagnant solution for 28 days, however, showed the unstable FeCO3 layer and therefore a deeper localized corrosion compared to that of seven-day exposed specimens.
Hard coated steel components are used in a wide application range, mostly for protective, wear resistant and decorative purposes. Despite of these coatings being regarded as relatively dense, there is always a high risk of localized corrosion when a coated low alloyed steel component encounters a surrounding high humidity atmosphere or even an aqueous medium. An approach to enhance the corrosion properties is the addition of magnesium to physical vapor deposited hard coatings, like TiN. It has been found that there is a remarkable increase in corrosion resistance in dependence of magnesium content of the TiMgN coating and its surface properties. In this work the authors will explain the underlying corrosion protection mechanisms by means of electrochemical and analytical studies. The positive impact of magnesium in the coating relates on its preferred dissolution vs. steel. This causes the potential to shift to more negative direction with respect to the steel substrate and additionally leads to a temporarily passivation of the steel due to alkalization of the surrounding electrolyte by formation of magnesium hydroxide.
For reliability and safety issues of injection wells, corrosion resistance of materials used needs to be determined. Herein, representative low-cost materials, including carbon steel X70/1.8977 and low alloyed steel 1.7225, were embedded in mortar to mimic the realistic casing-mortar interface. Two types of cement were investigated: (1) Dyckerhoff Variodur commercial Portland cement, representing a highly acidic resistant cement and (2) Wollastonite, which can react with CO2 and become stable under a CO2 stream due to the carbonation process. Exposure tests were performed under 10 MPa and at 333 K in artificial aquifer fluid for up to 20 weeks, revealing crevice corrosion and uniform corrosion instead of expected pitting corrosion. To clarify the role of cement, simulated pore water was made by dispersing cement powder in aquifer fluid and used as a solution to expose steels. Surface analysis, accompanied by element mapping on exposed specimens and their crosssections, was carried out to trace the chloride intrusion and corrosion process that followed.