Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
- Zeitschriftenartikel (189) (entfernen)
Sprache
- Englisch (183)
- Deutsch (5)
- Portugiesisch (1)
Schlagworte
- Concrete (15)
- Corrosion (14)
- Alkali-activated materials (13)
- Flame retardant (9)
- Cement (6)
- Durability (5)
- Additive manufacturing (4)
- Carbon steel (4)
- Cone calorimeter (4)
- Fatigue (4)
- Mechanical properties (4)
- Phosphorus (4)
- Rheology (4)
- Rubber (4)
- Structural health monitoring (4)
- Acid resistance (3)
- Compressive strength (3)
- Corrosion testing (3)
- DFG SPP 2005 (3)
- Fire protection (3)
- Fire resistance (3)
- Fire test (3)
- Flame retardancy (3)
- Graphene (3)
- Ground vibration (3)
- High-density polyethylene (3)
- Hyperbranched (3)
- Impurities (3)
- Lithium-ion battery (3)
- Proper generalized decomposition (3)
- Spalling (3)
- Thermal runaway (3)
- Value of information (3)
- Accelerated testing (2)
- Alkali silica reaction (2)
- Aluminium (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Baustoffrecycling (2)
- Bridge (2)
- Building and Construction (2)
- Bus interior materials (2)
- CCUS (2)
- Calcined clay (2)
- Carbon fibers (2)
- Carbonation (2)
- Cement matrix (2)
- Characterization (2)
- Civil and Structural Engineering (2)
- Corrosion resistance (2)
- Crop protection products (2)
- Depletion force (2)
- Dripping (2)
- EPDM (2)
- Electrochemical methods (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FTIR (2)
- Fire behaviour (2)
- Fire statistics (2)
- Flame retardants (2)
- Flammability (2)
- Full notch creep test (FNCT) (2)
- Gel electrolytes (2)
- Geothermal (2)
- High-performance concrete (2)
- Human behaviour (2)
- Impact simulation (2)
- Intumescent coating (2)
- Isogeometric analysis (2)
- Laser scanning microscopy (LSM) (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leichte Gesteinskörnungen (2)
- Luminescence (2)
- MIC (2)
- Mauerwerkbruch (2)
- Microstructure (2)
- Model Updating (2)
- Model updating (2)
- Moisture transport (2)
- Monitoring (2)
- Nanocomposite (2)
- Nanocomposites (2)
- PFEM (2)
- Polymers of Intrinsic Microporosity (2)
- Polyurethane (2)
- Portland cement (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Reliability (2)
- Rice husk ash (2)
- SHM (2)
- Smoke gas emission (2)
- Sr isotopes (2)
- Structural Health Monitoring (2)
- Structural sealant glazing (2)
- Synergy (2)
- Synthesis (2)
- Thermal treatment (2)
- Thermoplastic polyurethane (2)
- Train-induced ground vibration (2)
- UL 94 (2)
- Verkehrsinfrastukturen (2)
- Weathering (2)
- 3-dimensional microscopy (1)
- 3DCP (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- AFm phase (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Acetylation (1)
- Acid attack (1)
- Acoustic emission (1)
- Acoustic emission monitoring (1)
- Adaptive importance sampling (1)
- Adhesives (1)
- Agar (1)
- Ageing (1)
- Aging (1)
- Agricultural by-product (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- Alkali aggregate reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali–silica reaction (1)
- Aluminium hydroxide (1)
- Aluminum trihydroxide (ATH) (1)
- Analytical methods (1)
- Angle of repose (1)
- Anode (1)
- Aquifer fluid (1)
- Architecture (1)
- Aromatic (1)
- Artificial ageing (1)
- Asymptotic local approach (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Austenitic stainless steel (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated expansion measurement (1)
- Automated operational modal analysis (1)
- Axle sequence (1)
- Bacterial attachment (1)
- Bauwerksüberwachung (1)
- Bayesian Inference (1)
- Bayesian updating of stress ranges (1)
- Behmite (1)
- Belastungstest (1)
- Bench-scale fire resistance (1)
- Bending (1)
- Beton (1)
- Binary zinc alloys (1)
- Bingham fluid (1)
- Bio-based concrete (1)
- Biodegradable (1)
- Biofilm (1)
- Biomaterials (1)
- Bioreceptivity (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bituminous binders (1)
- Blade (1)
- Blended cement (1)
- Boehmite (1)
- Boson peak (1)
- Boundary element (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Building response (1)
- Building with earth (1)
- Burning behavior (1)
- Burning behaviour (1)
- CCS (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- Cables (1)
- Calorimetry (1)
- Carbon (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon fibre reinforced (1)
- Carbon fibre reinforced polymer (1)
- Carbonation behaviour (1)
- Casing (1)
- Cathode active material (1)
- Cement hydration (1)
- Cement paste (1)
- Cement suspension (1)
- Ceramics (1)
- Charge density (1)
- Charring (1)
- Chemical admixtures (1)
- Chemical synthesis (1)
- Chemisorption (1)
- Chloride (1)
- Chloride binding (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Coating (1)
- Combined finite-element boundary-element method (1)
- Components of excitation (1)
- Composite material (1)
- Composites (1)
- Composites in fire (1)
- Compressed earth (1)
- Compression tests (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete beam (1)
- Concrete printing (1)
- Concrete repair (1)
- Condensate (1)
- Condensed Matter Physics (1)
- Cone claorimeter (1)
- Consequences (1)
- Construction and demolition waste (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Covalent Organic frameworks (1)
- Crack (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Critical chloride content (1)
- Crosslinking (1)
- Crystalline admixture (1)
- Crystalline phase identification (1)
- Cyclic weathering (1)
- DGEBA (1)
- DIN tube furnace (1)
- DMDHEU (1)
- DOPO (1)
- Damage Identification (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection (1)
- Damage detection systems (1)
- Damage evolution (1)
- Data infrastructures (1)
- Datenfusion (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Degradation (1)
- Dehydration (1)
- Demolition wastes (1)
- Dendritic (1)
- Denkmalpflege (1)
- Design of experiment (1)
- Destructive testing (1)
- Detection (1)
- Deteriorating structures (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dissolution (1)
- Distributed fiber optic sensing (1)
- Distributed fibre optic sensor (1)
- Domain decomposition methods (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Durability assessment (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic excitation (1)
- Dynamic loads (1)
- EPR (1)
- EVA (1)
- Earth block masonry (1)
- Earth material (1)
- Egress (1)
- Elastomers (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Elevated temperature (1)
- Engineering data (1)
- Engineering egress data (1)
- Environmental Chemistry (1)
- Environmental and Operational Variability (1)
- Environmental influence (1)
- Epoxies (1)
- Erosion (1)
- Estimation (1)
- Ethylene-vinyl acetate (1)
- European project (1)
- Evacuation (1)
- Excitation forces (1)
- Explosion limit (1)
- FAIR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Facade (1)
- Fatigue damage (1)
- Fatigue strength (1)
- Fiber optic sensor (1)
- Fibre bragg grating (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite elements (1)
- Fire (1)
- Fire retardant interlayers (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible wheelset (1)
- Flow properties (1)
- Flowability (1)
- Flue gas desulfurization gypsum (1)
- Foam (1)
- Foams (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Frost salt attack (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Furniture (1)
- Future‑oriented standards (1)
- GPU Parallel computing (1)
- Gas analysis (1)
- Gas emission (1)
- Gas explosion (1)
- Gel-bound Colorants (1)
- General Materials Science (1)
- Geometric vehicle and track irregularities (1)
- Geopolymers (1)
- Gips (1)
- Glass fiber-reinforced composites (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Green facades (1)
- Green urban construction (1)
- Grinding (1)
- Halogen-free (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner ratio (1)
- Heat of combustion (1)
- Heat release (1)
- Heat transfer (1)
- Heat treatment (1)
- Heavy metal removal (1)
- Heterogeneity (1)
- High density polyethylene (1)
- High heat resistance (1)
- High throughput screening (1)
- High-rise building (1)
- High‐nitrogen steel (1)
- Horizontal wind turbine (1)
- Hot storage (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hydration (1)
- Hydration stoppage (1)
- Hydrogarnet (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- IEPE (1)
- ISO 9223 (1)
- Icing conditions (1)
- Identification and quantification of additives (1)
- Ignition (1)
- Illite (1)
- In-situ ED-XRD (1)
- In-situ testing (1)
- Inclination angle (1)
- Industrial by-products (1)
- Infra-lightweight concrete (1)
- Infraleichtbeton (1)
- Interlaboratory test (1)
- Intumescent additives (1)
- Ionic stregth (1)
- Kaolinite (1)
- Knowledge graphs (1)
- Korrosion (1)
- LBM-DEM (1)
- LIBS (1)
- Laminate design (1)
- Laminates (1)
- Large components (1)
- Large-scale tests (1)
- Laser-induced slip casting (1)
- Lateral dynamic displacement (1)
- Leather (1)
- Leather waste (1)
- Leichtgranulate (1)
- LiFePO4 (1)
- Lightweight aggregates (1)
- Limestone powder (1)
- Linear elastic fracture mechanics (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load identification (1)
- Load tests (1)
- Local approaches (1)
- Localized model order reduction (1)
- Low-carbon construction (1)
- Low-frequency shaker (1)
- Lunar regolith (1)
- MCC (1)
- Magnesium chloride brine (1)
- Magnesium hydroxide (1)
- Mapping for unseparable load (1)
- Martensitic steels (1)
- Maschinelles Lernen (1)
- Maschinenfundament (1)
- Mass loss (1)
- Material moisture (1)
- Materials (1)
- Materials Chemistry (1)
- Materials informatics (1)
- Measurement campaigns (1)
- Mechanical Engineering (1)
- Mechanical loading (1)
- Mechanical strength (1)
- Mechanics of Materials (1)
- Mechanistic study (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Metals and Alloys (1)
- Metathesis (1)
- Methyl group rotation (1)
- Micro-CT scanning (1)
- Microbially induced corrosion (1)
- Micromechanical modelling (1)
- Microplastic (1)
- Microscopy (1)
- Middle Pleistocene (1)
- Mitigation (1)
- Mitigation strategies (1)
- Mix-design (1)
- Model Building (1)
- Model calibration (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modern (1)
- Moisture content (1)
- Molecular mass distribution (1)
- Monitoring strategy (1)
- Monopile support structure (1)
- Mortar method (1)
- Movement characteristics (1)
- Multi-beam track model (1)
- Multilayer graphene (1)
- Multiscale methods (1)
- Multivariate evaluation (1)
- Nanoparticles (1)
- Natural rubber (1)
- Nelson’s method (1)
- Network (1)
- Neutron Scattering (1)
- Neutron scattering (1)
- Nitric acid (1)
- Non-destructive testing (1)
- Nondestructive testing (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Numerische Analysen (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Ontologies (1)
- Operational Modal Analysis (1)
- Optical backscatter reflectometry (1)
- Optical criterion of brittleness (1)
- Organophosphonate (1)
- Orthotropic steel deck (1)
- Oxyfuel (1)
- PCE (1)
- PVD hard coating (1)
- Packaging (1)
- Particle-bed binder jetting (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Permeation measurements (1)
- Phase development (1)
- Phospha-Michael addition (1)
- Phosphine oxide (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Physisoprtion (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polyethylene (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer of intrisic microporosity (1)
- Polymers (1)
- Polyolefins (1)
- Polyphosphoester (1)
- Polysaccharides (1)
- Polyurethane foams (1)
- Pore pressure (1)
- Pore structure (1)
- Porosity (1)
- Porous media (1)
- Portland clinker (1)
- Post-fire testing (1)
- Posterior fatigue reliability (1)
- Potassium ions (1)
- Powders (1)
- Prepregs (1)
- Pressure-sensitive adhesive (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Preventive strategies (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Probability of failure (1)
- Process upscaling (1)
- Proof loading (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Protective coatings (1)
- Provenance (1)
- Provenancing (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Quality (1)
- Quantitative moisture measurement (1)
- Railway induced vibration (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Reactive fire protection system (1)
- Real scale test (1)
- Recommendations (1)
- Recovery (1)
- Recyclable (1)
- Recycled materials (1)
- Recycling (1)
- Reduced order models (1)
- Reference values (1)
- Referenzbeispiel (1)
- Regulation (1)
- Reinforced concrete (1)
- Reinforcement corrosion (1)
- Relative humidity (1)
- Remote sensing vibrometer (1)
- Reproducibility (1)
- Resonance (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Rhenanite (1)
- Rheometry (1)
- Rigid (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Risk (1)
- Risk assessment (1)
- Road pavement (1)
- Room fire (1)
- Rregulations (1)
- Safety (1)
- Sample piece size (1)
- Scattering (1)
- Schnellladung (1)
- Scientific workflows (1)
- Screening test (1)
- Sealing structures (1)
- Self-healing (1)
- Sensitivity (1)
- Sensitivity analysis (1)
- Sensitivity vectors (1)
- Sift-proofness (1)
- Silica (1)
- Silicone elastomer (1)
- Simulation (1)
- Sintering (1)
- Size effect (1)
- Slag (1)
- Slow crack growth (SCG) (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil (1)
- Soil properties (1)
- Sol-gel (1)
- Solid-state NMR (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Spectral elements (1)
- Stainless steel (1)
- Static axle loads (1)
- Statistical pattern recognition (1)
- Steel (1)
- Steel construction (1)
- Steel corrosion (1)
- Steel corrrosion (1)
- Steinergänzungsmassen (1)
- Stereophotogrammetry (1)
- Stiffness variation (1)
- Stone Age (1)
- Strain (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress corrosion tests (1)
- Stress intensity factor (1)
- Stress stiffening (1)
- Stress-strain relation (1)
- Structural health monitoring (SHM) (1)
- Structural reliability (1)
- Structural system identification (1)
- Strukturmonitoring (1)
- Strätlingite (1)
- Sulfate attack (1)
- Sulfide (1)
- Sulfur containing polymers (1)
- Supplementary cementitious material (1)
- Supplementary cementitous materials (1)
- Surface conditions (1)
- Surface interactions (1)
- Surfaces, Coatings and Films (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- System Identification (1)
- System identification (1)
- TED-GC/MS (1)
- TGA-FTIR (1)
- TGA-MS (1)
- Tannery industry (1)
- Tapes (1)
- Temperature effect (1)
- Tension members (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Testing (1)
- Testing methods (1)
- Testing procedure (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thermal Analysis (1)
- Thermal Gravimetric Analysis (1)
- Thermal analysis (1)
- Thermal transient problem (1)
- Thermodynamic modelling (1)
- Throwing-stick (1)
- Titanium nitride (1)
- Tobermorite (1)
- Tool comparison (1)
- Toxicity (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Train passage (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrasonic testing (1)
- Ultrasound gel (1)
- Uncertainty Quantification (1)
- Utility and decision theory (1)
- Value of action analysis (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Vitrimer (1)
- Vocabulary providers (1)
- Vulcanization (1)
- Waste management (1)
- Water transport (1)
- Wave propagation (1)
- Wavenumber integrals (1)
- Waxes (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Wellenausbreitung (1)
- Wheelset accelerations (1)
- Whole-chain CCS scenario (1)
- Wildfire (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine tower (1)
- Wire arc additive manufacturing (1)
- Wire break (1)
- Wood (1)
- Wood modification (1)
- Workflow management (1)
- Working life (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- Xpoxy resin (1)
- Yield stress (1)
- ZfP (1)
- Zinc (1)
- Zinc coatings (1)
- Znc (1)
- layered soil (1)
- magnesium (1)
- melamine (1)
- mortar method (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- spectral elements (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (189) (entfernen)
Paper des Monats
- ja (16)
The current trend for future flame retardants (FRs) goes to novel efficient halogen-free materials, due to the ban of several halogenated FRs. Among the most promising alternatives are phosphorus-based FRs, and of those, polymeric materials with complex shape have been recently reported. Herein, we present novel halogen-free aromatic and aliphatic hyperbranched polyphosphoesters (hbPPEs), which were synthesized by olefin Metathesis polymerization and investigated them as a FR in epoxy resins. We compare their efficiency (aliphatic vs. aromatic) and further assess the differences between the monomeric compounds and the hbPPEs. The decomposition and vaporizing behavior of a compound is an important factor in its flame-retardant behavior, but also the interaction with the pyrolyzing matrix has a significant influence on the performance. Therefore, the challenge in designing a FR is to optimize the chemical structure and its decomposition pathway to the matrix, with regards to time and temperature. This behavior becomes obvious in this study, and explains the superior gas phase activity of the aliphatic FRs.
Wood products are often treated by different techniques to improve their longevity when used as building materials. Most of the time, the goal is to increase their resistance to weathering effects, deformations in material dimensions or biotic decomposition. These wood treatment techniques have a significant impact on pyrolysis and burning behavior. The general effects of three different common wood treatments on flame retardancy were investigated by comparing treated woods with their untreated counterparts and with other kinds of wood. While the acetylation of beech leads to a slightly increased fire hazard, the thermal treatment of wood and crosslinking of cellulose microfibrils dimethyloldihydroxy-ethyleneurea show a limited flame retarding effect. Switching to woods with a higher lignin content, and thus higher char yield, however, results in a more pronounced improvement in flame retardancy performance. This article delivers a comprehensive and balanced assessment of the general impact of different wood modifications on the fire behavior. Further, it is a valuable benchmark for assessing the flame retardancy effect of other wood modifications.
Automated modal analysis for tracking structural change during construction and operation phases
(2019)
The automated modal analysis (AMA) technique has attracted significant interest over the last few years, because it can track variations in modal parameters and has the potential to detect structural changes. In this paper, an improved density-based spatial clustering of applications with noise (DBSCAN) is introduced to clean the abnormal poles in a stabilization diagram. Moreover, the optimal system model order is also discussed to obtain more stable poles. A numerical Simulation and a full-scale experiment of an arch bridge are carried out to validate the effectiveness of the proposed algorithm. Subsequently, the continuous dynamic monitoring system of the bridge and the proposed algorithm are implemented to track the structural changes during the construction phase. Finally, the artificial neural network (ANN) is used to remove the temperature effect on modal frequencies so that a health index can be constructed under operational conditions.
Esta pesquisa avaliou o fenômeno de autocicatrização nas propriedades mecânicas e absorção capilar de concretos estruturais. Foram avaliados dois aditivos cristalizantes em pó, dosados de acordo com o teor recomendado pelos fabricantes. Aditivos cristalizantes aumentam a densidade do gel C-S-H e formam cristais insolúveis, bloqueando fissuras. Três traços de concreto foram produzidos: referência, aditivo-X com 0,8% e aditivo-Y com 2,0% em relação a massa do cimento. Aplicou-se 75% da carga de ruptura aos 3- e 14-dias para gerar microfissuras e comparar com a referência. Posteriormente, a autocicatrização foi avaliada aos 28- e 76-dias. A propriedade de resistência à compressão axial foi determinada aos 28-dias, revelando que os aditivos cristalizantes contribuíram para um aumento médio de 12% desta propriedade. A idade do carregamento dos concretos não apresentou um impacto significativo na resistência à compressão axial, mas apontou resultados significativos entre os tipos de aditivos estudados, conforme ANOVA. As propriedades de absorção de água por capilaridade foram avaliadas aos 28- e 76-dias, indicando uma redução de absorção de água média de 42% devido ao uso dos aditivos cristalizantes. Em conclusão, a incorporação dos aditivos cristalizantes contribuiu de maneira positiva para a autocicatrização dos concretos estudados, indicando uma recuperação parcial das microfissuras.
Numerical models built as virtual-twins of a real structure (digital-twins) are considered the future ofmonitoring systems. Their setup requires the estimation of unknown parameters, which are not directly measurable. Stochastic model identification is then essential, which can be computationally costly and even unfeasible when it comes to real applications. Efficient surrogate models, such as reduced-order method, can be used to overcome this limitation and provide real time model identification. Since their numerical accuracy influences the identification process, the optimal surrogate not only has to be computationally efficient, but also accurate with respect to the identified parameters. This work aims at automatically controlling the Proper Generalized Decomposition (PGD) surrogate’s numerical accuracy for parameter identification. For this purpose, a sequence of Bayesian model identification problems, in which the surrogate’s accuracy is iteratively increased, is solved with a variational Bayesian inference procedure. The effect of the numerical accuracy on the resulting posteriors probability density functions is analyzed through two metrics, the Bayes Factor (BF) and a criterion based on the Kullback-Leibler (KL) divergence. The approach is demonstrated by a simple test example and by two structural problems. The latter aims to identify spatially distributed damage, modeled with a PGD surrogate extended for log-normal random fields, in two different structures: a truss with synthetic data and a small, reinforced bridge with real measurement data. For all examples, the evolution of the KL-based and BF criteria for increased accuracy is shown and their convergence indicates when model refinement no longer affects the identification results.
Using digital twins for decision making is a very promising concept which combines simulation models with corresponding experimental sensor data in order to support maintenance decisions or to investigate the reliability. The quality of the prognosis strongly depends on both the data quality and the quality of the digital twin. The latter comprises both the modeling assumptions as well as the correct parameters of these models. This article discusses the challenges when applying this concept to realmeasurement data for a demonstrator bridge in the lab, including the data management, the iterative development of the simulation model as well as the identification/updating procedure using Bayesian inference with a potentially large number of parameters. The investigated scenarios include both the iterative identification of the structural model parameters as well as scenarios related to a damage identification. In addition, the article aims at providing all models and data in a reproducibleway such that other researcher can use this setup to validate their methodologies.
Fire resistance testing of components made of carbon fibre reinforced polymers (CFRP) usually demands intermediate-scale or full-scale testing. A bench-scale test is presented as a practicable and efficient method to assess how different fire protective systems improve the structural integrity of CFRPs during fire. The direct flame of a fully developed fire was applied to one side of the CFRP specimen, which was simultaneously loaded with compressive force. Three different approaches (film, non-woven, and coatings) were applied: paper with a thickness in the range of μm consisting of cellulose nanofibre (CNF)/clay nanocomposite, nonwoven mats with thickness in the range of cm and intumescent coatings with a thickness in the range of mm. The uncoated specimen failed after just 17 s. Protection by these systems provides fire stability, as they multiply the time to failure by as much as up to 43 times. The reduced heating rates of the protected specimens demonstrate the reduced heat penetration, indicating the coatings’ excellent heat shielding properties. Bench-scale fire stability testing is shown to be suitable tool to identify, compare and assess different approaches to fire protection.
Materials that support natural biodiversity on their surfaces can compensate for human activities that have a negative impact on nature and thus contribute to a carbon-neutral and nature-positive world. Specifically designing bioreceptive materials which favor the growth of biofilms on their surface is an approach complementing conventional, macroscopic green façades. But what exactly characterizes a bioreceptive substrate and how do biofilm and substrate interact? How and why does a spontaneous colonization and the formation of biofilms take place? What are biofilms and how can they be established in a laboratory setting? How can this existing knowledge be transferred to the artificial stone concrete so that this material can be tuned to increase (or decrease) its bioreceptivity?
This review paper aims at summarizing the existing state of knowledge on bioreceptive concrete and pointing out inconsistencies and contradictions which can only be removed by more interdisciplinary research in the field.
Flexible polyurethane foams (FPUF) are easy to ignite and exhibit rapid flame spread. In this paper, the fire phenomena of two standard foam formulations containing tris (1,3-dichloro-2-propyl) phosphate (FR-2) and a halogen-freepoly (ethyl ethylene phosphate) (PNX), respectively, as flame retardants are compared. A multimethodological approach is proposed which combines standard fire tests as well as new investigatory approaches. The thermophysical properties of the foams were determined by thermogravimetric analysis (TG), reaction to small flames was studied by means of the limiting oxygen index (LOI) and UL 94 HBF test, and the burning behavior was investigated with the cone calorimeter. Further, temperature development in burning cone calorimeter samples was monitored using thermocouples, and rheological measurements were performed on pyrolyzed material, delivering insight
into the dripping behavior of the foams. This paper gives comprehensive insight into the fire phenomena of flame-retarded FPUFs that are driven by the two-step decomposition behavior of the foams. LOI and UL 94 HBF tests showed a reduced flammability and reduced tendency to drip for the flame-retarded foams. TG and cone calorimeter measurements revealed that the two-step decomposition behavior causes two stages during combustion, namely structural collapse and pool fire. The flame-retardant mode of action was identified to take place primarily during the foam collapse and be based mainly on flame inhibition. However, some condensed-phase action was been measured, leading to significantly increased melt viscosity and improved dripping behavior for foams containing PNX.
Additive manufacturing of concrete structures is a novel and emerging technology. Freecontouring in civil engineering, which allows for entirely new designs, is a significant advantage. Inthe future, lower construction costs are expected with increased construction speeds and decreasingrequired materials and workers. However, architects and civil engineers rely on a certain quality ofexecution to fulfil construction standards. Although several techniques and approaches demonstratethe advantages, quality control during printing is highly challenging and rarely applied. Due to thecontinuous mixing process commonly used in 3D concrete printing, it is impossible to exclude varia-tions in the dry mixture or water content, and a test sample cannot be taken as a representative samplefor the whole structure. Although mortar properties vary only locally, a defect in one layer duringprinting could affect the entire integrity of the whole structure . Therefore, real-time process monitor-ing is required to record and document the printing process.At the Bundesanstalt für Materialforschung und -prüfung (BAM) a new test rig for the additive man-ufacturing of concrete is built. The primary purpose is measuring and monitoring the properties of amortar during the printing process.The following study investigates an approach for calculating yield stress and plastic viscosity based onexperimentally recorded pressure data. The calculations assume that fresh mortar behaves as a Bing-ham fluid and that the Buckingham-Reiner-equation is applicable. A test setup consisting of rigid pipeswith integrated pressure sensors at different positions is utilized.Monitoring the printing process with different sensors is crucial for the quality control of an ongoingprocess.