Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
Sprache
- Englisch (68)
Schlagworte
- Laser beam welding (22)
- Microstructure (6)
- Laser metal deposition (5)
- Resistance spot welding (5)
- Solidification cracking (5)
- Hybrid laser arc welding (4)
- Hybrid laser-arc welding (4)
- Mechanical properties (4)
- Thick-walled steel (4)
- Additive manufacturing (3)
- Artificial neural network (3)
- DED (3)
- Deep penetration (3)
- Fatigue tests (3)
- Hardness (3)
- Numerical modeling (3)
- Quality assurance (3)
- Tubular X-joints (3)
- Weld pool shape (3)
- Bulge effect (2)
- Critical strain (2)
- Data preparation (2)
- Directed Energy Deposition (2)
- Full penetration (2)
- Gap bridgeability (2)
- Grain refinement (2)
- High-power laser beam welding (2)
- L-PBF (2)
- Laser energy distribution (2)
- Laser hybrid welding (2)
- Laser-metal-deposition (2)
- Liquid metal embrittlement (2)
- Numerical modelling (2)
- Numerical process simulation (2)
- Numerical simulation (2)
- Optical flow (2)
- Porosity (2)
- Preheating (2)
- Process monitoring (2)
- Ray tracing (2)
- Refill friction stir spot welding (2)
- Single pass welding (2)
- Technical crack detection (2)
- Weld pool dynamics (2)
- Wire arc additive manufacturing (2)
- 9% Ni Steel (1)
- 9%Ni steel (1)
- AC magnetic field (1)
- AGIL (1)
- AHSS (1)
- AM feature integration (1)
- Additive Manufacturing (1)
- Advanced high strength steels (1)
- Advanced high-strength steel (1)
- AlMg0.7SiTiB filler wire (1)
- Aluminum bronze (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Automated arc welding (1)
- Automated manufacturing (1)
- Automotive (1)
- Bead-on-plate welds (1)
- Bending test (1)
- Bulge formation (1)
- Bulging (1)
- Bulging effects (1)
- CFD model (1)
- Carbon dioxide footprint (1)
- Charpy impact toughness (1)
- Cimensional Accuracy (1)
- Circumferential weld (1)
- Clustering (1)
- Columnar crystal growth (1)
- Computer vision (1)
- Condition monitoring (1)
- Convolutional neural network (1)
- Crack (1)
- Critical strain rate (1)
- Cryogenic steel (1)
- Crystal branch development (1)
- DED-EB (1)
- Damage prediction (1)
- Deep learning (1)
- Deep penetration laser beam welding (1)
- Digital Image Correlation (1)
- Digitalization (1)
- Directed energy deposition (1)
- Dissimilar joints (1)
- Distortion (1)
- Dual phase steel (1)
- Duplex AISI 2205 (1)
- Duplex steels (1)
- EBAM (1)
- EBSD (1)
- Edge quality (1)
- Electromagnetic backing (1)
- Electromagnetic stirring (1)
- Electromagnetic weld pool support (1)
- Electromagnetic weld pool support system (1)
- Element transport (1)
- Embedded electronics (1)
- End crater (1)
- Environmental impact categories (1)
- Filler material distribution (1)
- Filler wire (1)
- Filler wire mixing (1)
- Finite Element Method (1)
- Finite element method (FEM) (1)
- Finite element simulation (1)
- Flange width (1)
- Flüssigmetallinduzierte Rissbildung (1)
- Fusion zone size (1)
- Galvanized steel (1)
- General analytical solutions (1)
- Hardly separable problem (1)
- Heat Treatment (1)
- Heat source models (1)
- Heat treatment (1)
- High power laser beam welding (1)
- High process speeds (1)
- High strength steels (1)
- Hochfester Stahl (1)
- Hot cracking (1)
- Hot cracking test (1)
- Hybrid Laser arc Welding (1)
- Impact Absorbed Energy (1)
- Inconel 625 (1)
- Inconel 718 (1)
- Industrial and Manufacturing Engineering (1)
- Instumented indentation test (1)
- Integrated alignment features (1)
- Keyhole collapse (1)
- Lamé curves (1)
- Laser Metal Deposition (LMD) (1)
- Laser Powder Bed Fusion (1)
- Laser Welding (1)
- Laser cutting (1)
- Laser metal deposition (LMD) (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laser welding (1)
- Laser-plasma hybrid (1)
- Life cycle assessment (1)
- Liquid Metal Embrittlement (1)
- Local critical strain (1)
- Local fatigue approaches (1)
- Local fatigue spproaches (1)
- Magnesium Alloy (1)
- Magnesium alloy (1)
- Magnetic bath support (1)
- Magnetic field (1)
- Matching ferritic filler metal (1)
- Mechanical mismatching (1)
- Mechanical property (1)
- Melt pool dynamics (1)
- Metal mixing (1)
- Misalignment of edges (1)
- Model calibration (1)
- Model order reduction (1)
- Multi-materials joining (1)
- Multi-physical modelling (1)
- Multiple reflections (1)
- Ni-based austenitic filler metal (1)
- Nickel (1)
- Notch stress approach (1)
- Novel metrology (1)
- Numerical Simulation (1)
- Numerical welding simulations (1)
- Open science (1)
- Open source (1)
- Oscillating magnetic field (1)
- Oscillating vapor plume (1)
- PBF-LB/M (1)
- Partial penetration (1)
- Path planning (1)
- Penetration depth (1)
- Periodic solidification pattern (1)
- Pipe weld preparation (1)
- Plasma cutting (1)
- Plasma-cut samples (1)
- Plasma-transferred-arc (1)
- Plastic deformation (1)
- Post-weld heat treatment (1)
- Precipitation hardening aluminum alloys (1)
- Process chain (1)
- Proper generalized decomposition (1)
- Pulsed laser beam welding (1)
- Quality monitoring (1)
- Ray teacing (1)
- Ray-tracing methods (1)
- Research data management (1)
- SLM printed plasma torch (1)
- Seam geometry (1)
- Selective Laser Melting (1)
- Selektive-laser-melting (1)
- Ship building (1)
- Shipbuilding steel (1)
- Simulation (1)
- Single-pass welding (1)
- Software (1)
- Solidification (1)
- Stainless steels (1)
- Strain fields prediction (1)
- Strain measurement (1)
- Structural stress approach (1)
- Submerged arc welding (1)
- TIG welding (1)
- Tensile Strength (1)
- Tensile properties (1)
- Tensile resistance spot welding experiment (1)
- Texture (1)
- Thermal analysis (1)
- Thermal cycles (1)
- Thick materials (1)
- Thick plate welding (1)
- Thick-plate welding (1)
- Ti-6Al-4V (1)
- Two-dimensional solidification (1)
- Two-run welding technique (1)
- V-notch impact toughness (1)
- Vaporization (1)
- Weld pool (1)
- Welding (1)
- Welding Simulation (1)
- Welding simulation (1)
- Welding thermal cycle (1)
- Weldx (1)
- Widerstandspunktschweißen (1)
- Wire electron beam additive manufacturing (1)
- Wire feed laser beam welding (1)
- Wire-based additive manufacturing (1)
- Zink (1)
Organisationseinheit der BAM
- 9 Komponentensicherheit (68) (entfernen)
One of the main factors affecting the use of lasers in the industry for welding thick structures is the process accompanying solidification cracks. These cracks mostly occurring along the welding direction in the welding center, and strongly affect the safety of the welded components. In the present study, to obtain a better understanding of the relation between the weld pool geometry, the stress distribution and the solidification cracking, a three-dimensional computational fluid dynamic (CFD) model was combined with a thermo-mechanical model. The CFD model was employed to analyze the flow of the molten metal in the weld pool during the laser beam welding process. The weld pool geometry estimated from the CFD model was used as a heat source in the thermal model to calculate the temperature field and the stress development and distributions. The CFD results showed a bulging region in the middle depth of the weld and two narrowing areas separating the bulging region from the top and bottom surface. The thermo-mechanical simulations showed a concentration of tension stresses, transversally and vertically, directly after the solidification during cooling in the region of the solidification cracking.
Due to rapid, localized heating and cooling, distortions accumulate in additive manufactured laser metal deposition (LMD) components, leading to a loss of dimensional accuracy or even cracking. Numerical welding simulations allow the prediction of these deviations and their optimization before conducting experiments. To assess the viability of the simulation tool for the use in a predictive manner, comprehensive systems as well as to choose the optimal product matches, product analysis methods are needed. Indeed, most of the known methods aim to analyze a product or one product family on the physical level. Different product families, however, may differ largely in terms of the number and nature of components. This fact impedes an efficient comparison and choice of appropriate product family combinations for the production system. A new methodology is proposed to analyze existing products in view of their functional and physical architecture. The aim is to Cluster these products in new assembly oriented product families for the optimization.
Laser-Metal-Deposition (LMD) and Plasma-Transferred-Arc (PTA) are well known Technologies which can be used for cladding purposes. The prime objective in combining LMD and PTA as a Hybrid Metal Deposition-Technology (HMD) is to achieve high Deposition rates at low thermal Impact. Possible applications are coatings for wear protection or repair welding for components made of steel. The two energy sources (laser and Plasma arc) build a Joint process Zone and are configurated to constitute a stable process at laser powers between 0.4-1 kW (defocused) and Plasma currents between 75-200 A. Stainless steel 316L serves as filler material. For this HMD process, a Plasma Cu-nozzle is designed and produced by powder bed based Selective Laser Melting. The potential of the HMD Technology is investigated and discussed considering existing process. This paper demonstrates how the interaction of the two energy sources effects the following application-relevant properties: Deposition rate, powder Efficiency and energy Input.
A transient simulation including the impact of the laser energy, the melting of the metal and the development of the weld pool was conducted to observe the evolution of the vapor capillary and the solidification of the melt in pulsed laser beam welding of AISI 304 steel. The phase field method was implemented to investigate the evolution and behavior of the liquid-gas interface during welding and to describe the condensed and vapor phases. The effects of phase transition, recoil pressure, thermo-capillary and natural convection, vaporization and temperature dependent material properties were taken into account. A Gaussian-like heat source under consideration of the Fresnel absorption model was used to model the energy input of the laser beam. The heat source model was extended by a newly developed empirical approach of describing multiple beam reflections in the keyhole. To validate this new model, the numerical results were compared to experimental data and good agreement regarding the size and shape of the weld pool was observed.
The geometry of the melt pool in laser beam welding plays a major role to understand the dynamics of the melt and its solidification behavior. In this study, a butt configuration of 15 mm thick structural steel and transparent quartz glass was used to observe the weld pool geometry by means of high-speed camera and an infrared camera recording. The observations show that the dimensions of the weld pool vary depending on the depth. The areas close to the weld pool surface take a teardrop-shape. A bulge-region and its temporal evolution were observed approximately in the middle of the depth of the weld pool. Additionally, a 3D transient thermal-fluid numerical simulation was performed to obtain the weld pool shape and to understand the formation mechanism of the observed bulging effect. The model takes into account the local temperature field, the effects of phase transition, thermo-capillary convection, natural convection and temperature-dependent material properties up to evaporation temperature. The numerical results showed good accordance and were furthermore used to improve the understanding of the experimentally observed bulging effect.
The hybrid laser arc welding (HLAW) process provides many advantages such as improved gap bridgeability, deep penetration and misalignment of edges, that is why the process is used increasingly in industrial applications e.g. shipbuilding, power plant industry and line-pipe manufacturing. The obvious encountered problem for single pass welding in flat position is the gravity drop-out at low welding velocities. With the usage of an electromagnetic weld pool support system, which is based on generating Lorentz forces within the weld pool, wide seams followed by reduced welding velocities could be achieved in this study leading to the realization of a gap bridgeability up to 1 mm, misalignment of edges up to 2 mm and a single pass weld up to 28 mm thickness with a 20-kW fibre laser. These developments expand the boundaries of the HLAW process for different industrial applications. As a result, less accurate preparation of the edges would be sufficient, which saves time for manufacturing.
The laser hybrid welding process offers many advantages regarding deep penetration, increased welding velocity and with the help of the supplied filler wire an improved bridgeability to gap and misalignment tolerances. High power laser systems with a power of approx. 30 kW are already available on the market. Nevertheless, multi-layer technology with an arc process is still used for welding of plates from a thickness from 20 mm. A potential cause is the process instability with increasing laser power. It is inevitable that gravity drop-out due to the high hydrostatic pressure at increasing wall thickness especially at welding in flat position and with a low welding speed. The surface tension decreases with increasing root width resulting from low welding velocities. To prevent such inadmissible defects of the seam a use of weld pool support is required. Usual weld pool support systems such as ceramic or powder supports require a mechanical detachment which is time-consuming. The electromagnetic weld pool support system described in this work shows an alternative weld pool support which works contactless. It is based on generating Lorentz forces in the weld pool due to oscillating magnetic field and induced eddy currents. This innovative technology offers single pass welds up to 28 mm in flat position and reduced welding velocity with a laser power of just 19 kW. It also leads to improved mechanical-technological properties of the seams because of the slow cooling rate. With usage of an electromagnetic weld pool support the limitation of the hybrid laser arc welding process in the thick sheet metal will be extend.
This paper represents the results for proposed optical flow method based on the Lucas-Kanade (LK) algorithm applied to two different problems. The following observations can be made:
- The estimated strain and displacement for conducted tensile test are generally very close to those measured with conventional DIC-technique.
- The LK technique allows measurement of strain or displacement without special selection of a region of interest.
Using a novel optical measurement technique together with the optical flow algorithm, a twodimensional deformation analysis during welding was conducted. This technique is the first to provide a measurement of the full strain field locally in the immediate vicinity of the solidification front. Additionally, the described procedure of the optical measurement allows the real material-dependent values of critical strain characterizing the transition to hot cracking during laser welding processes to be determined.
The paper deals with the integration of a light emitting diode (LED) into an additive manufactured metal component. Selective laser melting (SLM) and laser metal deposition (LMD) are used. The material used is the chrome-nickel steel 316L. The basic component is manufactured by means of SLM and consists of a solid body and an area with grid structure. The solid body includes a duct in the shape of a groove with a recess for the positioning of the power cable. The LED is embedded in the grid structure via an inlet from the solid body. In further processing, the groove is filled with LMD. Two strategies with different parameter combinations were investigated. It shows that a high energy input near the power cable leads to its destruction. By using multiple parameter combinations during the manufacturing process, this destruction can be prevented. There was a comparison of both strategies with regard to the necessary number of tracks and duration of welding time.
To increase the competitiveness of jacket substructures compared to monopiles a changeover from an individual towards a serial jacket production based on automated manufactured tubular joints combined with standardized pipes has to be achieved. Therefore, this paper addresses fatigue tests of automatically welded tubular X-joints focusing on the location of the technical fatigue crack. The detected location of the technical crack is compared to numerical investigations predicting the most fatigue prone notch considering the structural stress approach as well as the notch stress approach. Besides, the welding process of the automated manufactured tubular X-joints is presented.