Wissenschaftliche Artikel der BAM
Filtern
Dokumenttyp
Sprache
- Englisch (205)
- Deutsch (12)
- Portugiesisch (1)
Schlagworte
- Concrete (17)
- Alkali-activated materials (15)
- Corrosion (15)
- Flame retardant (9)
- Cement (7)
- Fatigue (6)
- Additive manufacturing (5)
- Durability (5)
- Rheology (5)
- Carbon steel (4)
- Cone calorimeter (4)
- Mechanical properties (4)
- Phosphorus (4)
- Rubber (4)
- Structural health monitoring (4)
- Acid resistance (3)
- Africa (3)
- Carbonation (3)
- Compressive strength (3)
- Corrosion testing (3)
- DFG SPP 2005 (3)
- Fire test (3)
- Flame retardancy (3)
- Graphene (3)
- Ground vibration (3)
- High-density polyethylene (3)
- Hyperbranched (3)
- Impurities (3)
- Lithium-ion battery (3)
- Materials (3)
- Mauerwerkbruch (3)
- Proper generalized decomposition (3)
- Reliability (3)
- Spalling (3)
- Sustainability (3)
- Thermal runaway (3)
- Value of information (3)
- Weathering (3)
- Accelerated testing (2)
- Additive Fertigung (2)
- Alkali silica reaction (2)
- Aluminium (2)
- Aluminum diethylphosphinate (2)
- Aluminum hydroxide (ATH) (2)
- Baustoffrecycling (2)
- Bingham fluid (2)
- Bridge (2)
- Building and Construction (2)
- Bus interior materials (2)
- CCUS (2)
- Calcined clay (2)
- Carbon fibers (2)
- Cement matrix (2)
- Characterization (2)
- Civil and Structural Engineering (2)
- Corrosion resistance (2)
- Crop protection products (2)
- Depletion force (2)
- Dripping (2)
- EPDM (2)
- Electrochemical methods (2)
- Environmental stress cracking (2)
- Environmental stress cracking (ESC) (2)
- Evaporite rock (2)
- Expandable graphite (2)
- Explicit dynamics (2)
- FTIR (2)
- Fire behaviour (2)
- Fire protection (2)
- Fire resistance (2)
- Fire statistics (2)
- Flame retardants (2)
- Flammability (2)
- Full notch creep test (FNCT) (2)
- Gel electrolytes (2)
- Geothermal (2)
- High-performance concrete (2)
- Human behaviour (2)
- Impact simulation (2)
- Isogeometric analysis (2)
- Laser scanning microscopy (LSM) (2)
- Layered double hydroxide (2)
- Layered soil (2)
- Leichte Gesteinskörnungen (2)
- Luminescence (2)
- MIC (2)
- Material moisture (2)
- Microstructure (2)
- Model calibration (2)
- Model updating (2)
- Moisture transport (2)
- Monitoring (2)
- Nanocomposite (2)
- Nanocomposites (2)
- Non-destructive testing (2)
- PFEM (2)
- Polyurethane (2)
- Portland cement (2)
- Random field (2)
- Rapid mass calorimeter (2)
- Rice husk ash (2)
- Risk (2)
- Sensitivity analysis (2)
- Smoke gas emission (2)
- Sr isotopes (2)
- Steel corrosion (2)
- Structural Health Monitoring (2)
- Structural sealant glazing (2)
- Synergy (2)
- Synthesis (2)
- Thermal treatment (2)
- Thermoplastic polyurethane (2)
- Train-induced ground vibration (2)
- UL 94 (2)
- 3-dimensional microscopy (1)
- 3D Druck (1)
- 3D concrete printing (1)
- 3DCP (1)
- 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide; DOPO (1)
- AFm phase (1)
- ASR modelling (1)
- ASR-Sensitive Aggregate (1)
- Accelerated carbonation (1)
- Accelerated concrete prism test (1)
- Acceleration sensors (1)
- Acetylation (1)
- Acid attack (1)
- Acoustic emission (1)
- Acoustic emission monitoring (1)
- Active thermography (1)
- Adaptive importance sampling (1)
- Additive manufacturing of concrete (1)
- Adhesives (1)
- Admixtures (1)
- Agar (1)
- Aging (1)
- Agricultural by-product (1)
- Al/SiO2 composite (1)
- Al2O3 (1)
- Alite (1)
- Alkali aggregate reaction (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali–silica reaction (1)
- Aluminium hydroxide (1)
- Aluminum trihydroxide (ATH) (1)
- Analysis of variance (1)
- Analytical methods (1)
- Analytics (1)
- Angle of repose (1)
- Anode (1)
- Aquifer fluid (1)
- Architecture (1)
- Aromatic (1)
- Artificial ageing (1)
- Artificial weathering (1)
- Asymptotic local approach (1)
- Atmospheric corrosion (1)
- Atmospheric exposure (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Austenitic stainless steel (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated expansion measurement (1)
- Automated operational modal analysis (1)
- Axle sequence (1)
- Bacterial attachment (1)
- Bauwerksüberwachung (1)
- Bayesian Inference (1)
- Bayesian updating of measurement uncertainties (1)
- Bayesian updating of stress ranges (1)
- Behmite (1)
- Belastungstest (1)
- Bench-scale fire resistance (1)
- Bending (1)
- Berliner Tuffsteinfassaden (1)
- Beton (1)
- Betondickglasfenster des Glockenturms am Eiermannbau (1)
- Bewehrung (1)
- Bias (1)
- Binary zinc alloys (1)
- Bio-based concrete (1)
- Biodegradable (1)
- Biofilm (1)
- Biomaterials (1)
- Bioreceptivity (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Bituminous binders (1)
- Blade (1)
- Blended cement (1)
- Boehmite (1)
- Boson peak (1)
- Boundary element (1)
- Box-Behnken (1)
- Brick clay (1)
- Bridge Monitoring (1)
- Bridge resonance (1)
- Bridges (1)
- Brücke (1)
- Brückenmonitoring (1)
- Building response (1)
- Building with earth (1)
- Burning behavior (1)
- Burning behaviour (1)
- CCS (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- Cables (1)
- Calorimetry (1)
- Carbon (1)
- Carbon black (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon dioxide emissions (1)
- Carbon emissions (1)
- Carbon fibre reinforced polymer (1)
- Carbonation behaviour (1)
- Casing (1)
- Cathode active material (1)
- Cement hydration (1)
- Cement paste (1)
- Cement suspension (1)
- Ceramics (1)
- Charge density (1)
- Charring (1)
- Chemical admixtures (1)
- Chemical synthesis (1)
- Chemisoprtion (1)
- Chemisorption (1)
- Chloride (1)
- Chloride binding (1)
- Chloride extraction (1)
- Chloride penetration (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Civil Engineering (1)
- Civil engineering (1)
- Clinker substitute (1)
- Coating (1)
- Combined finite-element boundary-element method (1)
- Components of excitation (1)
- Composite material (1)
- Composites (1)
- Compressed earth (1)
- Compression tests (1)
- Concrete 3D-printing (1)
- Concrete Carbonation (1)
- Concrete beam (1)
- Concrete filled tube (CFT) column (1)
- Concrete printing (1)
- Concrete repair (1)
- Condensate (1)
- Condensed Matter Physics (1)
- Cone claorimeter (1)
- Consequences (1)
- Construction (1)
- Control Chart (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Corrosion rate (1)
- Corrosivity category (1)
- Covalent Organic frameworks (1)
- Crack (1)
- Crack Detection (1)
- Crack damage detection (1)
- Crack detection (1)
- Crack formation (1)
- Crack growth (1)
- Crack opening displacement (1)
- Crack pattern (1)
- Crack propagation (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Critical chloride content (1)
- Crosslinking (1)
- Crystalline admixture (1)
- Crystalline phase identification (1)
- Cusum (1)
- Cyclic load (1)
- Cyclic weathering (1)
- DIN tube furnace (1)
- DMDHEU (1)
- DOPO (1)
- Damage Quantification (1)
- Damage analysis (1)
- Damage detection (1)
- Damage detection systems (1)
- Damage evolution (1)
- Damage location (1)
- Data infrastructures (1)
- Datenfusion (1)
- Debonding Mechanism (1)
- Decarbonisation (1)
- Decision analysis (1)
- Decision theory (1)
- Decision tree (1)
- Degradation (1)
- Dehydration (1)
- Demolition wastes (1)
- Dendritic (1)
- Denkmalpflege (1)
- Design of experiment (1)
- Destructive testing (1)
- Detection (1)
- Deteriorating structures (1)
- Developing building materials (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide (1)
- Dibenzo[d,f][1,3,2]dioxaphosphepine 6-oxide; BPPO (1)
- Digital Twins (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital twin (1)
- Digital workflows (1)
- Dissolution (1)
- Distributed fiber optic sensing (1)
- Distributed fibre optic sensor (1)
- Domain decomposition methods (1)
- Drawing layers (1)
- Drehrohrofen (1)
- Drone (1)
- Durability assessment (1)
- Dynamic Bayesian Network (1)
- Dynamic axle loads (1)
- Dynamic loads (1)
- EPR (1)
- EVA (1)
- Earth block masonry (1)
- Earth masonry (1)
- Earth material (1)
- Education (1)
- Egress (1)
- Elastomers (1)
- Electrochemical cells (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Elevated temperature (1)
- Engineering data (1)
- Engineering egress data (1)
- Environmental Chemistry (1)
- Environmental influence (1)
- Epoxies (1)
- Erosion (1)
- Estimation (1)
- Ethylene-vinyl acetate (1)
- European project (1)
- Evacuation (1)
- Excitation forces (1)
- Explosion limit (1)
- FAIR (1)
- FTIR spectroscopy (1)
- FTIR-ATR (1)
- FTIR-ATR Measurements (1)
- Facade (1)
- Fatigue damage (1)
- Fatigue strength (1)
- Fault detectionchanging (1)
- Fiber optic sensor (1)
- Fibre bragg grating (1)
- Fibre pull-out (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite element method (1)
- Finite element model (1)
- Finite elements (1)
- Fire (1)
- Fire after earthquake (1)
- Fire performance (1)
- Fire safety (1)
- Fire spalling (1)
- Fire stability (1)
- Fire tests (1)
- Flame retardance (1)
- Flame retardant; (1)
- Flexible PU foam (1)
- Flexible car body (1)
- Flexible polyurethane foam (1)
- Flexible wheelset (1)
- Flow properties (1)
- Flowability (1)
- Foam (1)
- Foams (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Fracture toughness (1)
- Free polymer (1)
- Freeze-thaw attack (1)
- Frost salt attack (1)
- Fuel sorption (1)
- Full notch creep test (1)
- Furniture (1)
- Future‑oriented standards (1)
- GPU Parallel computing (1)
- Galvanic corrosion (1)
- Gas analysis (1)
- Gas emission (1)
- Gas explosion (1)
- Gel-bound Colorants (1)
- General Materials Science (1)
- Geometric vehicle and track irregularities (1)
- Geopolymers (1)
- Gips (1)
- Glass-fiber-reinforced plastic transport tank (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Gold mit Synchrotronstrahlung (1)
- Green facades (1)
- Green urban construction (1)
- Grinding (1)
- Grout (1)
- Grouted connection (1)
- Grouting (1)
- Halogen-free (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner ratio (1)
- Heat of combustion (1)
- Heat release (1)
- Heat transfer (1)
- Heat treatment (1)
- Heavy metal removal (1)
- Heterogeneity (1)
- High density polyethylene (1)
- High heat resistance (1)
- High throughput screening (1)
- High-Throughput Fire Tests (1)
- High-rise building (1)
- High‐nitrogen steel (1)
- Horizontal wind turbine (1)
- Hot storage (1)
- Hybrid alkaline cement (1)
- Hybrid cements (1)
- Hydration (1)
- Hydration stoppage (1)
- Hydraulic reactivity (1)
- Hydrogarnet (1)
- Hydrogen‐induced stress corrosion cracking (1)
- Hydrothermal treatment (1)
- Hydroxylellestadite (1)
- Hüttensandmehl (1)
- IEPE (1)
- ISO 9223 (1)
- Icing conditions (1)
- Identification and quantification of additives (1)
- Ignition (1)
- Illite (1)
- In-situ ED-XRD (1)
- In-situ testing (1)
- Inclination angle (1)
- Infraleichtbeton (1)
- Inspection planning (1)
- Interlaboratory test (1)
- Intumescent additives (1)
- Intumescent coating (1)
- Intumescent coatings (1)
- Ionic stregth (1)
- Kaiser-Wilhelm-Gedächtniskirche (1)
- Kandelaber des Ensembles am Charlottenburger Tor (1)
- Kaolinite (1)
- Knowledge graphs (1)
- Knudsen effect (1)
- Korrosion (1)
- Kunststoffe (1)
- Künstliche Bewitterung (1)
- LBM-DEM (1)
- LIBS (1)
- Laminates (1)
- Large components (1)
- Large-scale tests (1)
- Laser-induced slip casting (1)
- Lateral dynamic displacement (1)
- Leaching (1)
- Leather (1)
- Leather waste (1)
- Leichtgranulate (1)
- Levelized cost of energy (1)
- LiFePO4 (1)
- Limestone powder (1)
- Linear elastic fracture mechanics (1)
- Linear parameter varying systems (1)
- Lithium (1)
- Lithium aluminosilicates (1)
- Load identification (1)
- Load tests (1)
- Local approaches (1)
- Localized model order reduction (1)
- Low-carbon construction (1)
- Low-frequency shaker (1)
- Lunar regolith (1)
- MCC (1)
- Magnesium chloride brine (1)
- Magnesium hydroxide (1)
- Mapping for unseparable load (1)
- Maritime Atmosphäre (1)
- Maritime atmosphere (1)
- Martensitic steels (1)
- Maschinelles Lernen (1)
- Mass loss (1)
- Material characterization (1)
- Materials Chemistry (1)
- Materials informatics (1)
- Measurement campaigns (1)
- Mechanical Engineering (1)
- Mechanical loading (1)
- Mechanical strength (1)
- Mechanics of Materials (1)
- Mechanistic study (1)
- Melamine cyanurate (1)
- Melamine polyphosphate (1)
- Metals and Alloys (1)
- Metathesis (1)
- Methyl group rotation (1)
- Micro-CT scanning (1)
- Microbially induced corrosion (1)
- Microfine Cement (1)
- Micromechanical modelling (1)
- Microplastic (1)
- Microscopy (1)
- Middle Pleistocene (1)
- Mineralogie (1)
- Mitigation (1)
- Mitigation strategies (1)
- Mix-design (1)
- Modal Analysis (1)
- Model interpolation (1)
- Model order reduction (1)
- Model order reduction (MOR) (1)
- Model reduction (1)
- Model update (1)
- Modell-Update (1)
- Modellierung (1)
- Modern (1)
- Moisture content (1)
- Molecular diffusion (1)
- Molecular mass distribution (1)
- Monitoring strategy (1)
- Monopile support structure (1)
- Mortar method (1)
- Movement characteristics (1)
- Mukuru (1)
- Multi-beam track model (1)
- Multilayer graphene (1)
- Multiscale methods (1)
- Multivariate evaluation (1)
- NDT (1)
- Nanoparticles (1)
- Natural rubber (1)
- Nelson’s method (1)
- Network (1)
- Neutron scattering (1)
- Nitric acid (1)
- Non-destrucive testing (1)
- Nondestructive testing (1)
- Nuclear waste repository (1)
- Nuclear waste storage (1)
- Obstacles (1)
- Offshore (1)
- Offshore foundations (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Offshore wind turbines (1)
- Ontologies (1)
- Optical backscatter reflectometry (1)
- Optical criterion of brittleness (1)
- Organophosphonate (1)
- Orthotropic steel deck (1)
- Oxyfuel (1)
- PCE (1)
- PVD hard coating (1)
- Packaging (1)
- Papierasche (1)
- Particle-bed binder jetting (1)
- Pedestrian dynamics (1)
- Pedestrians with disabilities (1)
- Pergamonmuseums (1)
- Permeation measurements (1)
- Phase development (1)
- Phasenzusammensetzung (1)
- Phospha-Michael addition (1)
- Phosphine oxide (1)
- Phosphorous flame retardant (1)
- Phosphorus availability (1)
- Phosphorus flame retardants (1)
- Phosphorus-containing flame retardant (1)
- Physisoprtion (1)
- Physisorption (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Poly(butadiene terephthalates) (PBT) (1)
- Polyamide 4.6 (1)
- Polyaniline (1)
- Polybutadiene/chloroprene (1)
- Polyethylene (1)
- Polyisocyanurate (1)
- Polyisocyanurate; PIR (1)
- Polymer Fibres (1)
- Polymer of intrisic microporosity (1)
- Polymere (1)
- Polymers (1)
- Polymers of Intrinsic Microporosity (1)
- Polyolefins (1)
- Polyphosphoester (1)
- Polysaccharides (1)
- Polyurethane foams (1)
- Pore pressure (1)
- Pore structure (1)
- Porosity (1)
- Porous media (1)
- Portland clinker (1)
- Posterior fatigue reliability (1)
- Potassium ions (1)
- Powders (1)
- Pressure-sensitive adhesive (1)
- Prestressed concrete bridge (1)
- Prestressing steels (1)
- Preventive strategies (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Probability of failure (1)
- Process monitoring (1)
- Process noise (1)
- Process upscaling (1)
- Proficiency Testing (1)
- Proof loading (1)
- Proper Generalized Decomposition (1)
- Proper generalized decomposition (PGD) (1)
- Protective coatings (1)
- Provenance (1)
- Provenancing (1)
- Pudovik reaction (1)
- Pull-Out Behaviour (1)
- Quality (1)
- Quality Infrastructure (1)
- Quantitative moisture measurement (1)
- Radiografische Untersuchung (1)
- Railway induced vibration (1)
- Raman spectroscopy (1)
- Rammed earth (1)
- Randomly heterogeneous soil (1)
- Reactive fire protection system (1)
- Real scale test (1)
- Recommendations (1)
- Reconstruction of stress resultants (1)
- Recovery (1)
- Recyclable (1)
- Recycled materials (1)
- Recycling (1)
- Reduced order models (1)
- Reference values (1)
- Regulation (1)
- Reinforced concrete (1)
- Reinforcement corrosion (1)
- Relative humidity (1)
- Remote sensing vibrometer (1)
- Repair (1)
- Reproducibility (1)
- Research (1)
- Resonance (1)
- Restauriermörtel (1)
- Resting time (1)
- Restraint (1)
- Rhenanite (1)
- Rheometry (1)
- Rigid (1)
- Rigid foam (1)
- Rigid vehicle model (1)
- Risk assessment (1)
- Road pavement (1)
- Robustness (1)
- Rohstoffliches Recycling (1)
- Room fire (1)
- Rregulations (1)
- Safety (1)
- Salinization (1)
- Sample piece size (1)
- Scattering (1)
- Schallemission (1)
- Schallemissionsanalyse (1)
- Schnellladung (1)
- Schriftrollen vom Toten Meer (1)
- Science (1)
- Sciences (1)
- Scientific workflows (1)
- Screening test (1)
- Sealing structures (1)
- Seismically damaged column (1)
- Self-healing (1)
- Sensitivity (1)
- Sensitivity vectors (1)
- Shell Buckling (1)
- Shrinkage Reducing Admixture (1)
- Sift-proofness (1)
- Silica (1)
- Silicone elastomer (1)
- Simulation (1)
- Sintering (1)
- Size effect (1)
- Slag (1)
- Slow crack growth (SCG) (1)
- Smoke (1)
- Smoke suppression (1)
- Smoke toxicity (1)
- Soaking time (1)
- Softening temperature (1)
- Soil (1)
- Soil-Structure-Interaction (1)
- Soil-structure interaction (1)
- Sol-gel (1)
- Solid-state NMR (1)
- Solvent replacement (1)
- Sorption isotherm (1)
- Spannbeton (1)
- Spannstahlbruch (1)
- Spectral elements (1)
- Stahlkorrosion (1)
- Stainless steel (1)
- Static axle loads (1)
- Static load (1)
- Statistical pattern recognition (1)
- Steel (1)
- Steel corrrosion (1)
- Steel fibres (1)
- Steel structures (1)
- Steelmaking slag (1)
- Steinergänzungsmassen (1)
- Stereophotogrammetry (1)
- Stiffness variation (1)
- Stone Age (1)
- Strain (1)
- Strain measurements (1)
- Strain measurements of wind turbine support structures (1)
- Stress corrosion cracking (1)
- Stress corrosion tests (1)
- Stress intensity factor (1)
- Stress stiffening (1)
- Stress-strain relation (1)
- Structural build-up (1)
- Structural health monitoring (SHM) (1)
- Structural integrity management (1)
- Structural reliability (1)
- Structural system identification (1)
- Strukturmonitoring (1)
- Strätlingite (1)
- Subspace-based residual (1)
- Sulfate attack (1)
- Sulfid (1)
- Sulfide (1)
- Sulfur containing polymers (1)
- Superplasticizer (1)
- Supplementary Cementitious Materials (1)
- Supplementary cementitious material (1)
- Supplementary cementitious materials (1)
- Supplementary cementitous materials (1)
- Surface conditions (1)
- Surface interactions (1)
- Surfaces, Coatings and Films (1)
- Sustainable cement (1)
- Sustainable construction (1)
- Swelling (1)
- System identification (1)
- TED-GC/MS (1)
- TGA-FTIR (1)
- TGA-MS (1)
- Tannery industry (1)
- Tapes (1)
- Temperature effect (1)
- Tensile strength (1)
- Tension members (1)
- Ternary zinc alloys (1)
- Test setup (1)
- Test solutions (1)
- Testing (1)
- Testing methods (1)
- Testing procedure (1)
- Textile reinforced concrete (1)
- Textile-reinforced concrete (1)
- Thermal Analysis (1)
- Thermal Gravimetric Analysis (1)
- Thermal analysis (1)
- Thermal transient problem (1)
- Thermodynamic modelling (1)
- Thermodynamik (1)
- Thermografie (1)
- Thixotropy (1)
- Throwing-stick (1)
- Titanium nitride (1)
- Tobermorite (1)
- Tool comparison (1)
- Toxicity (1)
- Track and vehicle irregularities (1)
- Track damage quantification (1)
- Track filtering (1)
- Train passage (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- UV radiation (1)
- UV-irradiation (1)
- Ultrasonic testing (1)
- Ultrasound gel (1)
- Uncertainty Quantification (1)
- Urban planning (1)
- Urbanisation (1)
- Utility and decision theory (1)
- Value of action analysis (1)
- Variational Bayesian Inference (1)
- Variational Bayesian statistics (1)
- Variational inference (1)
- Variational multiscale method (1)
- Vehicle-track-soil interaction (1)
- Vehicle–track interaction (1)
- Versalzung (1)
- Vibration (1)
- Vitrimer (1)
- Vocabulary providers (1)
- Vulcanization (1)
- Waste management (1)
- Water transport (1)
- Wavenumber integrals (1)
- Waxes (1)
- Weld fatigue (1)
- Weld imperfections (1)
- Welded (1)
- Wheelset accelerations (1)
- Whole-chain CCS scenario (1)
- Wildfire (1)
- Wind (1)
- Wind Energy (1)
- Wind Turbines (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine tower (1)
- Wire arc additive manufacturing (1)
- Wire break (1)
- Wood (1)
- Wood modification (1)
- Workflow management (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- Xpoxy resin (1)
- Yield stress (1)
- Zement (1)
- Zerstörungsfreie Prüfung (1)
- ZfP (1)
- Zinc (1)
- Zinc coatings (1)
- Znc (1)
- hydrothermale Behandlung (1)
- layered soil (1)
- leichte Gesteinskörnung (1)
- magnesium (1)
- melamine (1)
- mortar method (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- poröse Granulate (1)
- spectral elements (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (218) (entfernen)
Paper des Monats
- ja (15)
The microscopic diffusion and the low frequency density of states (VDOS) of PIM-EATB(CH3) are investigated by inelastic and quasi-elastic neutron scattering where also the demethylated counterpart of PIM-EA-TB(H2) is considered. These intrinsic microporous polymers are characterized by large BET surface area values of several hundred m2/g and pore sizes between 0.5 and 2 nm. Detailed comparison is made to the archetype of polymers of intrinsic microporosity, PIM-1, and polynorbornenes also bearing a microporosity. Due to the wavelength of neutrons, the diffusion and vibrations can be addressed on microscopic length and time scales. From the inelastic neutron scattering experiments the low frequency density of states (VDOS) is estimated which shows excess contributions to the Debye-type VDOS known as Boson peak. It was found that the maximum frequency of the Boson peak decreases with increasing microporosity characterized by the BET surface area. However, besides the BET surface area, additional factors such as the backbone stiffness govern the maximum frequency of the Boson peak. Further the mean squared displacement related to microscopic motions was estimated from elastic fixed window scans. At temperatures above 175 K, the mean squared displacement PIM-EA-TB(CH3) is higher than that for the demethylated counterpart PIM-EA-TB(H2). The additional contribution found for PIM-EATB(CH3) is ascribed to the rotation of the methyl group in this polymer because the only difference between the two structures is that PIM-EA-TB(CH3) has methyl groups where PIM-EA-TB(H2) has none. A detailed comparison of the molecular dynamics is also made to that of PIM-1 and the microporous polynorbornene PTCNSi1. The manuscript focuses on the importance of vibrations and the localized molecular mobility characterized by the microscopic diffusion on the gas Transport in polymeric separation membranes. In the frame of the random gate model localized fluctuations can open or close bottlenecks between pores to enable the diffusion of gas molecules.
In this study, multicomponent flame retardant systems, consisting of Ammonium polyphosphate (APP), aluminum trihydroxide (ATH), and polyaniline (PANI), were used in ethylene propylene diene monomer (EPDM) rubber. The multicomponent system was designed to improve flame retardancy and the mechanical properties of the rubber compounds, while simultaneously reducing the amount of filler. PANI was applied at low loadings (7 phr) and combined with the phosphorous APP (21 phr) and the mineral flame retardant ATH (50 phr). A comprehensive study of six EPDM rubbers was carried out by systematically varying the fillers to explain the impact of multicomponent flame retardant systems on mechanical properties. The six EPDM materials were investigated via the UL 94, limiting oxygen index (LOI), FMVSS 302, glow wire tests, and the cone calorimeter, showing that multicomponent flame retardant systems led to improved fire performance.
In cone calorimeter tests the EPDM/APP/ATH/PANI composite reduced the maximum average rate of heat emission (MARHE) to 142 kW·m-2, a value 50% lower than that for the unfilled EPDM rubber. Furthermore, the amount of phosphorus in the residues was quantified and the mode of action of the phosphorous flame retardant APP was explained. The data from the cone calorimeter were used to determine the protective layer effect of the multicomponent flame retardant systems in the EPDM compounds.
Ethylene propylene diene monomer (EPDM) Rubbers with the flame retardants tris(2-ethylhexyl)phosphate, ammonium polyphosphate, polyaniline, and aluminum trihydroxide were prepared and analyzed in this study. The homogenous dispersion of the fillers in the rubber matrix was confirmed by scanning electron microscope. To investigate the interplay of the different flame retardants, the flame retardants were varied systematically. The comprehensive study sought combinations of flame retardants that allow high loadings of flame retardants without deterioration of the physical and mechanical properties of the EPDM rubber. The eight EPDM rubbers were investigated via thermogravimetric analysis and pyrolysis gas chromatography coupled with a mass spectrometer (Py GC/MS) to investigate the potential synergistic effects. In the Py-GC/MS experiments, 27 pyrolysis products were identified. Furthermore, UL 94, limiting oxygen index, FMVSS 302, glow wire tests, and cone calorimeter tests were carried out. In the cone calorimeter test the EPDM rubbers R-1AP and R-1/2P achieved an increase in residue at flameout of 76% and a reduction in total heat evolved of about 35%. Furthermore, the compounds R-1AP and R-1/2P achieved a reduction in MARHE to about 150 kW m−1, a reduction of over 50% compared to the unprotected rubber R.
For the purpose of increasing payload and reduce freight cost, lightweight composite tank containers used for Transportation have been progressively developed during the last years. Compared to conventionally produced cylindrical steel tanks, the fiber-reinforced solutions allow greater flexibility in the tank design. Despite a number of further material-related benefits of fiber-reinforced composites as non-conductive and non-magnetic behavior as well as corrosion resistance and high strength, the optimization of their thermal degradation properties during combustion is still a challenge. To improve the fire performance of lightweight composite containers, special intumescent fire protection coatings can be applied onto the outside tank surface. This paper presents fire tests on glass-fiber-reinforced plastic transport tanks with complex geometries sheltered with different surface-applied fire protection systems. To evaluate the fire resistance of the tank structures, a fiber optic monitoring system was developed. This system is based on distributed temperature measurements using high-Resolution optical backscatter reflectometry and pointwise reference measurements using fiber Bragg gratings. Thereby, all the fiber optic sensors were directly integrated in the composite layer structure of the tanks. The focus of the presented work is on the demonstration of capability of fiber optic monitoring system in such high-temperature application. Moreover, the fiber optic measurements provide new insights into the efficiency of intumescent coating applied for fire protection of fiber-reinforced plastic transport tanks.
The RILEM technical committee TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ conducted a round robin testing programme to determine the validity of various durability testing methods, originally developed for Portland cement based-concretes, for the assessment of the durability of alkali-activated concretes. The outcomes of the round robin tests evaluating sulfate resistance, alkali-silica reaction (ASR) and freeze–thaw resistance are presented in this contribution. Five different alkali-activated concretes, based on ground granulated blast furnace slag, fly ash, or metakaolin were investigated. The extent of sulfate damage to concretes based on slag or fly ash seems to be limited when exposed to an Na2SO4 solution. The mixture based on metakaolin showed an excessive, very early expansion, followed by a dimensionally stable period, which cannot be explained at present. In the slag-based concretes, MgSO4 caused more expansion and visual damage than Na2SO4; however, the expansion limits defined in the respective standards were not exceeded. Both the ASTM C1293 and RILEM AAR-3.1 test methods for the determination of ASR expansion appear to give essentially reliable identification of expansion caused by highly reactive aggregates. Alkali-activated materials in combination with an unreactive or potentially expansive aggregate were in no case seen to cause larger expansions; only the aggregates of known very high reactivity were seen to be problematic. The results of freeze–thaw testing (with/without deicing salts) of alkali-activated concretes suggest an important influence of the curing conditions and experimental conditions on the test outcomes, which need to be understood before the tests can be reliably applied and interpreted.
block and mortar types is analysed with particular regard to the influence of varying relative humidity. The uniaxial compressive strength and deformation characteristics of unstabilised earth blocks and mortars as well as of unstabilised earth block masonry are studied in detail and compared to conventional masonry to evaluate whether the structural design can be made accordingly. An increase of 30 % points in relative humidity leads to a reduction of the masonry´s compressive strength between 33 % and 35 % whereas the Young´s modulus is reduced by 24–29 %. However, the ratio between the Young´s modulus and the characteristic compressive strength of earth block masonry ranges between E33/fk = 283–583 but is largely independent of the relative humidity. The results show that the mechanical properties of the investigated unstabilised earth block masonry are sufficient for load-bearing structures, yielding a masonry compressive strength between 2.3 MPa and 3.7 MPa throughout the range of moisture contents
investigated. In general, the design concept of conventional masonry can be adapted for unstabilised earth masonry provided that the rather low Young´s modulus as well as the moisture dependence of both, compressive strength and Young´s modulus, are sufficiently taken into
account.
Alkali-silica reaction (ASR) is a chemical reaction within concrete which can lead over time to cracking and spalling. Due to the complexity of the problem, it still causes damage to concrete constructions worldwide.
The publication aims to illustrate the interdisciplinary research of the German Federal Institute for Materials Research and Testing (BAM) within the last 20 years, considering all aspects of ASR topics from the macro to the micro level. First, methods for characterization and assessment of ASR risks and reaction products used at BAM are explained and classified in the international context. Subsequently the added value of the research approach by combining different, preferably nondestructive, methods across all scales is explained using specific examples from a variety of research projects. Aspects covered range from the development of new test-setups to assess aggregate reactivity, to analysis of microstructure and reaction products using microscopical, spectroscopical and X-ray methods, to the development of a testing methodology for existing concrete pavements including in-depth analysis of the visual damage indicator and the de-icing salt input using innovative testing techniques. Finally, research regarding a novel avoidance strategy that makes use of internal hydrophobization of the concrete mix is presented.
Bitumen is a crucial building material in road construction, which is exposed to continuously higher stresses due to higher traffic loads and changing climatic conditions. Therefore, various additives are increasingly being added to the bitumen complicating the characterisation of the bituminous binder, especially concerning the reuse of reclaimed asphalt.
Therefore, this work aimed to demonstrate that the combination of Fourier transform infrared (FTIR) spectroscopy with attenuated total reflexion (ATR) technique and multivariate evaluation is a very wellsuited method to reliable identify and quantify additives in bituminous binders. For this purpose, various unmodified and modified binders, directly and extracted from laboratory and reclaimed asphalts, were investigated with FTIR-ATR spectroscopy. The determined spectra, pre-processed by standard normal variate (SNV) transformation and the determination of the 1st derivation, were evaluated using factor Analysis (FA), linear discriminant analysis (LDA) and partial least square regression (PLSR). With this multivariate evaluation, first, a significant model with a very high hit rate of over 90% was developed allowing for the identification of styrene-butadiene copolymers (SBC), ethylene-copolymer bitumen (ECB) and different waxes (e.g. amide and Fischer-Tropsch wax) even if the additives do not show any additional peaks or the samples are multi-modified. Second, a quantification of the content is possible for SBC, ECB, and Amide wax with a mean error of RMSE B 0.4 wt% and a
coefficient of determination of R2[90%. Based on these results, FTIR identification and quantification of additives in bituminous binders is a very promising method with a great potential.
During the service life of structural sealant glazing (SSG) facades, the loadbearing capacity of the silicone bonds needs to be guaranteed. Laboratory Tests can assess the durability of SSG-systems based on mechanical characteristics of the bond after simultaneous exposure to both climatic and mechanical loads.
This article studies how the material characteristics of two common structural sealants are affected by laboratory and field exposure. Dynamic mechanical Analysis (DMA) confirms a reduction in the dynamic modulus of exposed Silicone samples. Results from thermogravimetric analysis, Fourier-transform infrared spectroscopy, differential scanning calorimetry, and small-angle X-ray scattering/wide-angle X-ray scattering show differences between the two sealants and indicate no/minor changes in the composition and morphology of the laboratory and field exposed sealants. Mechanical characterization methods, such as DMA, and tensile and shear testing of the structural bond, are shown to be sensitive toward the combined climatic and mechanical loadings, and are hence suitable for studying degradation mechanisms of structural sealants.
Durability Assessment of Structural Sealant Glazing Systems applying a Performance Test Method
(2020)
During the service life of a Structural Sealant Glazing (SSG) facade, its silicone bond is exposed to climatic, chemical, and mechanical loads. While current durability assessment methods schedule separate test programmes for accelerated weathering and fatigue, the presented test applies mechanical loading and weather cycling simultaneously to simulate 50 years of use. Specifically designed medium-scale system specimens resemble a common SSG-bond. Displacement-controlled sinusoidal load cycles in two load directions subject these specimens to tensile, compression and shear loads. Weathering comprises temperature and humidity cycles, UV-radiation, and application of water and detergent. During testing, the forces transmitted by the system specimens are continuously measured for performance assessment. The resulting system response reveals mechanical performance characteristics like elastic moduli and dissipated energies which decrease during exposure, indicating stress relaxation and degradation. Two common structural sealants were tested. After testing, sections of the system specimens were subjected to tensile and shear tests for mechanical characterisation. Strengths and moduli are notably reduced by combined loading compared to those of reference and weathered specimens. Hardness and visual inspections of the bond correlate with the performance and bond characteristics. The approach introduced in this article provides a basis for life cycle assessment of SSG-systems.