Kerntechnische Entsorgung
Filtern
Dokumenttyp
- Vortrag (123)
- Beitrag zu einem Tagungsband (75)
- Posterpräsentation (30)
- Zeitschriftenartikel (21)
- Buchkapitel (7)
- Monografie (1)
- Beitrag zu einem Sammelband (1)
- Amtliche Bekanntmachung (1)
- Forschungsbericht (1)
Sprache
- Englisch (260) (entfernen)
Schlagworte
- Ageing (29)
- Ring Compression Test (18)
- Spent Nuclear Fuel (18)
- Transport (18)
- Drop test (17)
- Metal seal (17)
- Cladding Embrittlement (16)
- Ageing Management (15)
- IAEA (15)
- Compression set (13)
- Radioactive material (13)
- Extended Storage (12)
- Fire (12)
- Spent nuclear fuel (12)
- Transport packages (12)
- Creep (10)
- Wood (10)
- Drop testing (9)
- Leakage rate (9)
- Package (9)
- Transport package (9)
- Seal (8)
- Cladding (7)
- Interim storage (7)
- Fire test (6)
- Long-term behavior (6)
- Radioactive (6)
- Rubber (6)
- Degradation (5)
- EPDM (5)
- Finite element analysis (5)
- HNBR (5)
- Radioactive waste (5)
- Radioaktive Stoffe (5)
- Safety (5)
- Seal performance (5)
- Seals (5)
- Spent fuel (5)
- Storage (5)
- Cohesive Zone Modelling (4)
- Compression stress relaxation (4)
- Container (4)
- Discharge (4)
- Dual purpose cask (4)
- Extended Interim Storage (4)
- Fire testing (4)
- Friction (4)
- Fuel rod (4)
- Full-scale (4)
- Hydrogen (4)
- IAEA Regulations (4)
- Metal seals (4)
- Modelling (4)
- Nuclear fuel (4)
- Numerical simulation (4)
- Package design (4)
- Propane (4)
- Radioactive Waste (4)
- Ring compression test (4)
- Rubber seal (4)
- Smouldering (4)
- Spent Fuel Characterization (4)
- Thermal testing (4)
- Transport cask (4)
- Type-B Package (4)
- Acceleration (3)
- Aging (3)
- Arrhenius (3)
- Assessment (3)
- Back end (3)
- Bar length (3)
- Bolt connections (3)
- Convection coefficient (3)
- Disposal (3)
- Drop tests (3)
- Dual Purpose Casks (3)
- Experimental investigation (3)
- Experimental testing (3)
- FEM (3)
- FKM (3)
- Final repository Konrad (3)
- Fracture Mechanics (3)
- Fracture initiation (3)
- Fuel cladding (3)
- Gefahrgut (3)
- Heat Flux (3)
- Heat flux (3)
- Impact limiter (3)
- Leakage (3)
- Long-term behaviour (3)
- Low temperature (3)
- Measurement (3)
- Nuclear Fuel Cladding (3)
- Nuclear fuel cycle (3)
- Numerical Failure Analysis (3)
- Package testing (3)
- Propane gas fire test facility (3)
- Radioactive waste containers (3)
- Retention (3)
- Simulation (3)
- Stress relaxation (3)
- Target (3)
- Testing (3)
- Thermal Test (3)
- Transport Package (3)
- Transportation (3)
- Welding (3)
- (U)HMWPE (2)
- 1-m-punch-bar-drop-test (2)
- Accident Scenario (2)
- Advanced experimental (2)
- Ageing management (2)
- Ageing mechanisms (2)
- Aging management (2)
- Analysis (2)
- Assessment method (2)
- Battery (2)
- Bolt design (2)
- Brittle Fracture (2)
- Burner (2)
- Calorimeter (2)
- Calorimetric test (2)
- Coefficient of Friction (2)
- Combustion (2)
- Compression Set (2)
- Container for radioactive waste (2)
- Cylindrical Cask (2)
- DLO (2)
- DPC (2)
- Design approval (2)
- Design assessment of RAM packages (2)
- Drop (2)
- Dual Purpose Cask (2)
- Dual purpose casks (2)
- Ductile Cast Iron (2)
- Ductile cast iron (2)
- Dynamic impact tests (2)
- Editorial (2)
- Elastomer (2)
- Elastomers (2)
- Encapsulations for damaged spent nuclear fuel (2)
- Experiment (2)
- Experimental (2)
- Extended interim storage (2)
- Failure analysis (2)
- Finite Element Simulation (2)
- Finite element method (2)
- Fire Qualification (2)
- Fire Test Stand (2)
- Guide (2)
- H2 Fire (2)
- Heat flux sensor (2)
- High level waste (2)
- Hot cell testing (2)
- IAEA Fire (2)
- IAEA Regu-lations (2)
- IAEA Thermal Test (2)
- ISO (2)
- Internal gaps (2)
- Internal shock absorber (2)
- Irradiation (2)
- Leakage Rate (2)
- Length of puncture bar (2)
- Load attachment (2)
- Load cycles (2)
- Management (2)
- Manufacturing (2)
- Materials (2)
- Measurement methods (2)
- Mechanical assessment (2)
- Mechanism (2)
- Metallic seal (2)
- New package design (2)
- Non-approved (2)
- Numerical (2)
- Numerical Simulation (2)
- Numerical approach (2)
- Numerical modelling (2)
- O-ring (2)
- Polyethylene (2)
- Propane gas fire (2)
- Puncture bar test (2)
- Quality assurance (2)
- RAM packages (2)
- Radial hydrides (2)
- Radioactive Materials (2)
- Radioaktive (2)
- Reference Test (2)
- Rückbau kerntechnischer Anlagen (2)
- SHPB (2)
- SNF (2)
- SSR-6 (2)
- Safety assessment (2)
- Sea (2)
- Seal Behavior (2)
- Sequential analysis (2)
- Ship (2)
- Shock absorber (2)
- Smoldering (2)
- Special encapsulation (2)
- Spent fuel characterisation (2)
- Spent fuel characterization (2)
- Spent fuel performance (2)
- Stowage (2)
- Surveillance (2)
- Test (2)
- Thermal package testing (2)
- Time-temperature superposition (2)
- Transport Packages (2)
- Transport and storage cask (2)
- Transport of radaioactive materials (2)
- Transport of radioactive materials (2)
- Transport safety (2)
- Transportbehälter (2)
- Trunnion (2)
- Valve (2)
- WAXD (2)
- ACT (1)
- Acceleration values (1)
- Accelerometer (1)
- Accident Conditions of Transport (1)
- Accident Scenarios (1)
- Accurate-Numerical-Methods (1)
- Activation energy (1)
- Activity release (1)
- Adiabatic surface temperature (1)
- Aluminum seal (1)
- Antragsverfahren (1)
- BAM TTS (1)
- BAM-GGR 023 (1)
- Bauartprüfung (1)
- Beförderung (1)
- Brennelementverhalten (1)
- Brittle failure (1)
- Burn-up (1)
- Burning (1)
- CFD (1)
- CSR (1)
- Changes with time (1)
- Chemical processes (1)
- Cladding alloy (1)
- Coefficient of thermal expansion (1)
- Combustion Chamber (1)
- Competent authority (1)
- Component test (1)
- Component tests (1)
- Computational Fluid Dynamics (CFD) (1)
- Concepts (1)
- Concrete (1)
- Container Safety (1)
- Container design testing procedure (1)
- Containment (1)
- Containment analysis (1)
- Content simulation (1)
- Continuous compression stress relaxation (1)
- Convection (1)
- Criticality safety analysis (1)
- Cross-linking (1)
- Crosslinking (1)
- DMA (1)
- Degradative processes (1)
- Disposal container (1)
- Dissolution behaviour (1)
- Dynamic Tensile Test (1)
- ENSA (1)
- Elastomer Seals (1)
- Elastomer seal (1)
- Elastomeric seals (1)
- Electro-Magneto-Mechanical (1)
- Energy release (1)
- European Guide (1)
- Extended storing (1)
- FE-Berechnungen (1)
- FEA (1)
- FTIR (1)
- Failure Mechanism (1)
- Final Disposal (1)
- Final disposal (1)
- Final disposal container (1)
- Final storage (1)
- Finite Element Mesh Transition (1)
- Finite element anaylsis (1)
- Finite-element-analysis (1)
- Fire Reference (1)
- Fire Reference Test (1)
- Fire reference (1)
- Fre (1)
- Fuel assemblies (1)
- Fuel cladding integrity (1)
- Fuel rod behavior (1)
- Fuel rods (1)
- GUR (1)
- Gamma irradiation (1)
- Generalized Newmark-alpha (1)
- Glass transition (1)
- Guidance material (1)
- HLW (1)
- Hardness (1)
- Heat emission (1)
- Helical spring (1)
- Heterogeneous ageing (1)
- High temperature (1)
- High-Order (1)
- High-Order Methods (1)
- Hot cell (1)
- Hydride precipitation (1)
- IAEA fire (1)
- IAEA fire test (1)
- IAEA fire testing (1)
- IAEA regulations (1)
- IRHD (1)
- IRHD micro hardness (1)
- IRHD microhardness (1)
- Impact Limiters (1)
- Impact factor (1)
- Imperfectly mounted reinforcement cage (1)
- Indenter modulus (1)
- Independent Surveillance (1)
- Intermittent compression stress relaxation (1)
- Internal collision (1)
- Intumescent material (1)
- KONRAD (1)
- Kineatic aspects (1)
- Kinematic (1)
- Kinetic study (1)
- Ladungssicherung (1)
- Large objects (1)
- Large scale fire testing (1)
- Large scale testing (1)
- Lastanschlag (1)
- Leak-tightness (1)
- Leaktightnes (1)
- Levitation (1)
- Levitation Device (1)
- Lid temperature (1)
- Lid-system (1)
- Lifetime (1)
- Long term investigation (1)
- Long-term interim storage (1)
- Long-term investigation (1)
- Long-term safety (1)
- Low temperature investigation (1)
- Lowlevel and midlevel radioactive waste (1)
- Lowlevel midlevel radioactive waste (1)
- Lupolen (1)
- MID IR Spectroscopy (1)
- Machine element (1)
- Maintenance (1)
- Management system (1)
- Manufacturing tolerances (1)
- Material properties (1)
- Maxwell equations (1)
- Mechanical and thermal behaviour (1)
- Mechanical testing (1)
- Mechanik (1)
- Metal Seal (1)
- Metal Seals (1)
- Modeling (1)
- Multi-Modal Transportation Test (1)
- NCT (1)
- Nicht zulassungspflichtig (1)
- Not requiring competent authority approval (1)
- Nuclear Fuel (1)
- O Ring (1)
- O-Ring (1)
- O-ring metal seal (1)
- Oxidation (1)
- Oxygen permability (1)
- PU-Foam (1)
- Package safety (1)
- Package types (1)
- Packages (1)
- Partial crystalline (1)
- Periodic inspections (1)
- Physical relaxation (1)
- Plastic Instability (1)
- Polymer Testing (1)
- Polyurethane Foam (1)
- Polyurethane Foam, Impact Limiters, PU-Foam (1)
- Pprestressed bolt connection (1)
- Predisposal (1)
- Pressure build-up (1)
- Processes (1)
- Propane gas (1)
- Prototyp (1)
- Puncture test (1)
- Quality (1)
- Quality Assurance Measures (1)
- Quality management system (1)
- Qualitätsmanagement (1)
- Radial Hydrides (1)
- Radiation (1)
- Radioactive materials (1)
- Radioactive materials transport (1)
- Radioactive waste management (1)
- Radioactve (1)
- Radioaktiv (1)
- Rapid partial release (1)
- Rate-dependent Materials (1)
- Real transport (1)
- Recovery (1)
- Reference (1)
- Reinforced concrete containers (1)
- Relaxation (1)
- Requirements (1)
- Routine conditions of transport (1)
- Rubber seals (1)
- SCO-III (1)
- SNL (1)
- Safety Aspects (1)
- Safety report (1)
- Scale/shift factor and form/stretchFactor of time-temperature relation (1)
- Scission (1)
- Seal behavior (1)
- Seal failure (1)
- Sealed sources (1)
- Sealing (1)
- Sensitivity analysis (1)
- Silver seal (1)
- Similarity (1)
- Slap-down (1)
- Slug (1)
- Spent Fuel (1)
- Spent fuel behaviour (1)
- Spent nuclear fuel management (1)
- Spruce wood (1)
- Stacking test (1)
- Stochastic variation of material properties (1)
- Storage and transportation casks (1)
- Storage system components (1)
- Storing spent fuel (1)
- Strahlenschutz (1)
- Stress Wave Propagation (1)
- TTS (1)
- Tests (1)
- Thermal expansion (1)
- Thermal properties (1)
- Thermal simulation (1)
- Thermik (1)
- Thermo-rheologically simple/complex behaviour (1)
- Thermo-viscoplasticity (1)
- Thin Rod (1)
- Tightness (1)
- Time-temperature superposition principle (1)
- Time-temperature superposition/equivalent principle (1)
- Transport casks (1)
- Transport package for radioactive materials (1)
- Transport packages for radioactive material (1)
- Transportation and storage cask (1)
- Trunnion design (1)
- Ttransport (1)
- Typ (1)
- Typ-B Versandstück (1)
- Type A (1)
- Type A package (1)
- UF6 (1)
- Ultra high molecular weight (1)
- Ultra high molecular weight polyethylene (1)
- Unknown storage duration (1)
- Uranhexaflourid (1)
- Useable resilience (1)
- Very long term storage (1)
- Verzögerungswerte (1)
- Wet Content (1)
- Wood fire (1)
- ZIRLO® (1)
- Zulassung (1)
- Zulassungen (1)
- bended arrow of time (1)
- degradation (1)
- leakage (1)
- radioactive waste (1)
- radioaktives Material (1)
- rubber (1)
- stress relaxation (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (260) (entfernen)
Paper des Monats
- ja (2)
Elastomers show a high versatility which makes them ideal materials for sealing applications in various fields. Especially under changing application conditions the high recovery potential of this class of material is beneficial to compensate temperature or pressure fluctuation, and geometrical changes resulting from mechanical loads in e.g. accident conditions. Out of these reasons elastomers are also used in containers for low and intermediate level radioactive waste and for spent fuel transportation casks. In casks designed for low and intermediate level waste elastomer seals can act as primary seal responsible for the containment function whereas in spent fuel storage and transportation casks (dual purpose casks (DPC)) elastomer seals are used as auxiliary seals to allow leakage rate measurements of metal barrier seals. An inherent prerequisite for this kind of application is the Long time-scale of operation without or with limited possibility of seal replacement. In Germany an interim storage license for DPC`s is typically issued for 40 years, a timeframe which might increase in the future due to challenges of the final repository siting procedure. For low and intermediate level waste, also long time periods are required before final disposal can be achieved. Therefore, the performance of elastomer seals over extended time periods is, as for other applications, of high importance.
A typical approach to ensure long-term functionality is to perform accelerated aging tests to calculate an estimated lifetime by assuming e.g. Arrhenius like equations for the timetemperature relationship. This approach requires a suitable end of life criterion considering the application of interest. This often can represent a challenge on its own.
As BAM is involved in most of the cask licensing procedures and especially responsible for the evaluation of cask-related long-term safety issues we initiated several test programs for investigating the behavior of elastomer seals. Experiments concerning the low temperature performance down to -40 °C and the influence of gamma irradiation have been started first.
Currently the thermal aging behavior of elastomer seals, which is the topic of this contribution, is examined. For our aging investigations we use a broad approach to first determine the property changes in different elastomer materials due to thermo-oxidative aging at elevated temperatures and secondly, we test how the typical methods of lifetime extrapolation can be applied to these results. This Approach enables us to detect and exclude undesired side effects which very often influence lifetime estimations. In this contribution, our recent results are extended. The results show that lifetime estimation based on single material properties can be misleading and therefore a combination of several methods is recommended.
The Bundesanstalt für Materialforschung und –Prüfung (BAM) runs an investigation program on the long-term behavior of multi-component metal seals. Such seals are used in a wide area of applications including transport and storage casks for spent nuclear fuel and high level radioactive waste.
The seal function is mainly based on the compression of the inner helical spring, which generates the necessary seal force to keep the sealing surfaces in close contact. This in turn leads to a plastic deformation of the outer jacket of the seal, comprised of highly ductile aluminum or silver that adapts to the sealing surfaces of cask body and bolted lid, thus providing high Level leak tightness. In Germany, those casks are licensed for Interim storage periods of up to 40 years or more if extended Interim storage would become necessary before a final repository is available. Thus, the sealing performance has to be evaluated, including factors like elevated temperature due to decay heat or mechanical loads due to transport under normal as well as accident conditions. Long-term investigations at BAM have been running over the last nine years to identify and evaluate the seal performance by measuring the remaining seal force, the useable resilience and the leakage rate after various time intervals at temperatures ranging from room temperature up
to 150 °C. It was found that the seal force and useable resilience decrease with time and temperature, caused by creep deformation of the outer jacket. In order to obtain an analytical description for the seal behavior and to achieve more information on the material behavior under application conditions a comprehensive investigation program with Focus on aluminum as outer jacket material was launched. The program includes material investigations such as compression and tension creep tests with representative basic materials. An additional test setup allows for the continuous measurement of the remaining seal force at temperatures of up to 150 °C. Furthermore, seal segments are compressed and stored in heating chambers, thus producing segments at different stages of the aging process. The segments are investigated regarding the development of the contact area width, jacket thickness and microstructural changes. This data will be used to develop material models and an analytical description of the time and temperature dependent long-term sealing behavior. This paper explains the current status of gained test results and modelling approaches and closes with an outlook to the future Project plans.
Elastomers show a high versatility which makes them ideal materials for sealing applications in various fields. Especially under changing application conditions the high recovery potential of this class of material is beneficial to compensate temperature or pressure fluctuation, and geometrical changes resulting from mechanical loads in e.g. accident conditions. Out of these reasons elastomers are also used in containers for low and intermediate level radioactive waste and for spent fuel transportation casks. In cask designed for low and intermediate level waste elastomer seals can act as primary seal responsible for the containment function whereas in spent fuel storage and transportation casks (dual purpose casks (DPC)) elastomer seals are used as auxiliary seals to allow leakage rate measurements of metal barrier seals. An inherent prerequisite for this kind of application is the long time-scale of operation without or with limited possibility of seal replacement. In Germany an interim storage license for DPC`s is typically issued for 40 years, a timeframe which might increase in future due to challenges of the final repository siting procedure. For low and intermediate level waste, also long time periods are required before final disposal can be achieved. Therefore, the performance of elastomer seals over extended time periods is, as for other applications, of high importance.
A typical approach to ensure long-term functionality is to perform accelerated aging tests to calculate an estimated lifetime by assuming e.g. Arrhenius like equations for the time-temperature relationship. This approach requires a suitable end of life criterion considering the application of interest. This often can represent a challenge on its own.
As BAM is involved in most of the cask licensing procedures and especially responsible for the evaluation of cask-related long-term safety issues we initiated several test programs for investigating the behavior of elastomer seals. Experiments concerning the low temperature performance down to -40°C and the influence of gamma irradiation have been started first. Currently the thermal aging behavior of elastomer seals, which is the topic of this contribution, is examined.
For our aging investigations we use a broad approach to first determine the property changes in different elastomer materials due to thermo-oxidative aging at elevated temperatures and secondly we test how the typical methods of lifetime extrapolation can be applied to these results. This approach enables us to detect and exclude undesired side effects which very often influence lifetime estimations. In this contribution, our recent results are discussed.
The Bundesanstalt für Materialforschung und –prüfung (BAM) runs an investigation program on the long-term behavior of multi-component metal seals. Such seals are used in a wide area of applications including transport and storage casks for spent nuclear fuel and high level radioactive waste. The seal function is mainly based on the compression of the inner helical spring, which generates the necessary seal force to keep the sealing surfaces in close contact. This in turn leads to a plastic deformation of the outer jacket of the seal, comprised of highly ductile aluminum or silver that adapts to the sealing surfaces of cask body and bolted lid, thus providing high level leak tightness. In Germany, those casks are licensed for interim storage periods of up to 40 years or more if extended interim storage would become necessary before a final repository is available. Thus, the sealing performance has to be evaluated, including factors like elevated temperature due to decay heat or mechanical loads due to transport under normal as well as accident conditions. Long-term investigations at BAM have been running over the last nine years to identify and evaluate the seal performance by measuring the remaining seal force, the useable resilience and the leakage rate after various time intervals at temperatures ranging from room temperature up to 150 °C. It was found that the seal force and useable resilience decrease with time and temperature, caused by creep deformation of the outer jacket. In order to obtain an analytical description for the seal behavior and to achieve more information on the material behavior under application conditions a comprehensive investigation program with focus on aluminum as outer jacket material was launched. The program includes material investigations such as compression and tension creep tests with representative basic materials. An additional test setup allows for the continuous measurement of the remaining seal force at temperatures of up to 150 °C. Furthermore, seal segments are compressed and stored in heating chambers, thus producing segments at different stages of the aging process. The segments are investigated regarding the development of the contact area width, jacket thickness and microstructural changes. This data will be used to develop material models and an analytical description of the time and temperature dependent long-term sealing behavior. This paper explains the current status of gained test results and modelling approaches and closes with an outlook to the future project plans.
In Germany spent nuclear fuel and high level radioactive waste is stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. The used metal seals consist of three components as can be seen in the cross-sectional view in Figure 1. The innermost part is a helical spring that is surrounded by an inner jacket made of stainless steel. The outer jacket that is made of a softer material which in case of assembly in the aforementioned storage containers is silver or aluminum (i.e. Al 99.5). During application the seal is compressed and due to the restoring force of the helical spring, the outer jacket is plastically deformed and adapts to the sealing surface. Hence, leakage paths are closed and the sealing function is generated. In Germany the above-mentioned containers are licensed for up to 40 years of interim storage, which in case extended storage becomes necessary before a final repository is available will have to be extended to even longer periods. Therefore, the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads as well.
At Bundesanstalt für Materialforschung und –prüfung (BAM) long-term investigations are being conducted in which seals are assembled in test flanges and aged at temperatures ranging from room temperature to 150°C for accelerated aging. The aged seals are tested semi-annually (after the first 6 months in which the seals are tested more frequently) regarding the sealing performance, the remaining seal force, and the useable resilience upon decompression. Results of these investigations have been published over the past years (e.g. Grelle, Wolff, Probst, Jaunich, & Völzke, 2017; Völzke, Wolff, Probst, Nagelschmidt, & Schulz, 2014). It was found that the seal force and the useable resilience decrease with time and temperature, which is in agreement with the result of other studies (Sassoulas et al., 2006; Wataru et al., 2016) as well. Geometry change of the outer jacket has been identified as the main reason for this seal behavior. At the prevailing operating temperatures and stresses the aluminum is subjected to creep deformation leading to a thinning of the outer jacket. Since the seal groove depth remains unchanged the helical spring expands, which in turn leads to a decrease of the generated spring and seal force.
Although the main reason for the change of seal parameters over time and temperature is known, a detailed characterization of the seal behavior and a reliable prediction of the parameter development for aging times that exceed the experimental time frame have not been possible, yet.
For deeper understanding of the aging processes, an Investigation program, which is covered in this contribution, is conducted at Bundesanstalt für Materialforschung und –prüfung (BAM) that focusses on the behavior of the aluminum jacket and its influence on the long-term sealing performance. The program investigates properties of material samples as well as the behavior of the seal as a component.
Original sheet material of the same aluminum that is used for manufacturing of the seals is investigated in compression creep tests. For this, a DMA (dynamic mechanical analysis) machine is employed (here used for static tests) that allows for a measurement of the specimens deformation under forces of up to 500 N. The advantage of this method is that the original material can be tested in the same shape as used for the seals which is 0.5 mm thick sheet material. For investigation of tensile creep standard specimens are used, that were machined from surrogate material of the same composition and annealing condition.
Furthermore, aluminum seals that are cut into smaller segments are assembled in flanges and placed in heating chambers at temperatures ranging from 23°C to 150°C. After different periods of time from 3 days to 300 days the segments are taken out of the flanges and are investigated, thus giving information on different states of aging. Measurements of the development of the seal contact width and the aluminum jacket thickness are done with an optical microscope. Further investigations on the segments will include metallography and hardness measurements.
From the detailed material and component behavior including the results of the long-term seal force and useable resilience investigations a better understanding of the overall seal behavior can be gained. The aim is to contribute to the development of material models and analytical approaches for the prediction of the sealing behavior in dependence of time and temperature.
In Germany spent nuclear fuel (SNF) and high level radioactive waste (HLW) are stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. Being licensed for up to 40 years of interim storage the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads.
Among other mechanical tests the 1 meter drop onto a steel puncture bar shall be considered for accident safe packages for the transport of radioactive material. According with the IAEA regulations “the bar shall be of solid mild steel of circular section, 15.0 ± 0.5 cm in diameter and 20 cm long, unless a longer bar would cause greater damage…”. The most damaging puncture bar length can be estimated by iterative processes in numerical simulations. On the one hand, a sufficient puncture bar length has to guarantee that shock absorbers or other attachments do not prevent or reduce the local load application to the package, on the other hand, a longer and thus less stiff bar causes a smaller maximum contact force. The contrary influence of increasing puncture bar length and increasing effective drop height shall be taken into account if a shock absorber is directly placed in the target area. The paper presents a numerical approach to identify the bar length that causes maximum damage to the package. Using the example of two typical package masses the sensitivity of contact forces and puncture bar deformations to the initial length are calculated and assessed with regard to the international IAEA package safety requirements.
Component and material investigations on metal seals for high level radioactive waste containers
(2018)
In Germany casks for interim storage of spent nuclear fuel and high level radioactive waste are equipped with Helicoflex® metal seals as main sealing barrier of the double lid system. The long-term behaviour of those seals is investigated at Bundesanstalt für Materialforschung und –prüfung (BAM) in order to evaluate the safety function of the containment at different temperatures over storage periods of 40 years or more in case extended interim storage becomes necessary.
Long-term investigations have been done for ageing times of up to 8.5 years at temperatures ranging from room temperature to 150 °C. It was found that the seal force and useable resilience decrease over time, which is mainly caused by creep deformation of the aluminium (or silver) outer jacket of the seals. This effect becomes stronger with increasing temperature.
The ageing processes of the seal material and the overall seal behaviour is under investigation in order to derive analytical descriptions for the long-term seal performance. Thus, standardized tests on the basic seal materials, with focus on aluminium, and additional investigations on the seals as a component are conducted. The current investigations include compression and tension creep measurements as well as tensile testing. Furthermore, ageing of seal segments provides information on the development of the contact area width, jacket thickness and microstructural changes in dependence of time and temperature. The obtained data are used for the development of material models and an analytical approach to describe and predict the time and temperature dependent sealing behaviour in the long-term.
This presentation focusses on the thermal test of a typical storage container design for the German final storage repository KONRAD. The preparation of the container, the conduction of the fire test itself and results like the temperature evolution and as-sumptions for thermal material properties are shown.
As thermal test final storage containers have to be exposed to a fire of 800 °C (1472 °F) for 1 hour according to the final storage conditions provided by the federal com-pany for radioactive waste disposal (BGE). The here discussed cask contains a steel covered concrete layer of a thickness of 100/150 mm. Heating up concrete is a highly nonlinear process since the vaporization of residual water consumes high amounts of thermal energy and produce vast amounts of steam.
The constantly measured temperatures provide the basis to adjust common models of thermal properties for concrete esp. for FEAs. Finally in a later step this will allow predictions of similar designed container with different sizes.
The presentation provides an overview about the understanding of fuel cladding failure mechanisms dominated by hydride embrittlement during long term dry storage. A currently launched research project focuses on the development of a fracture mechanics approach to describe brittle failure of fuel cladding during long term interim storage (BRUZL)“. Finally, the BAM contribution to the current European Joint Program (EJP) on radioactive waste management is illustrated.