Kerntechnische Entsorgung
Filtern
Dokumenttyp
- Vortrag (120)
- Beitrag zu einem Tagungsband (72)
- Posterpräsentation (30)
- Zeitschriftenartikel (21)
- Buchkapitel (7)
- Monografie (1)
- Beitrag zu einem Sammelband (1)
- Amtliche Bekanntmachung (1)
- Forschungsbericht (1)
Sprache
- Englisch (254) (entfernen)
Schlagworte
- Ageing (28)
- Ring Compression Test (18)
- Spent Nuclear Fuel (18)
- Drop test (17)
- Metal seal (17)
- Transport (17)
- Cladding Embrittlement (16)
- Ageing Management (15)
- IAEA (15)
- Compression set (13)
- Radioactive material (13)
- Extended Storage (12)
- Spent nuclear fuel (12)
- Transport packages (12)
- Creep (10)
- Fire (10)
- Wood (10)
- Drop testing (9)
- Leakage rate (9)
- Package (9)
- Transport package (9)
- Seal (8)
- Cladding (7)
- Interim storage (7)
- Fire test (6)
- Long-term behavior (6)
- Radioactive (6)
- Rubber (6)
- Degradation (5)
- EPDM (5)
- Finite element analysis (5)
- HNBR (5)
- Radioactive waste (5)
- Safety (5)
- Seal performance (5)
- Seals (5)
- Spent fuel (5)
- Storage (5)
- Cohesive Zone Modelling (4)
- Compression stress relaxation (4)
- Container (4)
- Discharge (4)
- Dual purpose cask (4)
- Extended Interim Storage (4)
- Fire testing (4)
- Friction (4)
- Fuel rod (4)
- Full-scale (4)
- Metal seals (4)
- Modelling (4)
- Nuclear fuel (4)
- Numerical simulation (4)
- Package design (4)
- Propane (4)
- Radioactive Waste (4)
- Radioaktive Stoffe (4)
- Ring compression test (4)
- Rubber seal (4)
- Smouldering (4)
- Spent Fuel Characterization (4)
- Thermal testing (4)
- Transport cask (4)
- Type-B Package (4)
- Acceleration (3)
- Aging (3)
- Arrhenius (3)
- Assessment (3)
- Back end (3)
- Bar length (3)
- Bolt connections (3)
- Convection coefficient (3)
- Disposal (3)
- Drop tests (3)
- Dual Purpose Casks (3)
- Experimental investigation (3)
- Experimental testing (3)
- FEM (3)
- FKM (3)
- Final repository Konrad (3)
- Fracture Mechanics (3)
- Fracture initiation (3)
- Fuel cladding (3)
- Heat flux (3)
- IAEA Regulations (3)
- Impact limiter (3)
- Leakage (3)
- Long-term behaviour (3)
- Low temperature (3)
- Measurement (3)
- Nuclear Fuel Cladding (3)
- Nuclear fuel cycle (3)
- Numerical Failure Analysis (3)
- Package testing (3)
- Propane gas fire test facility (3)
- Radioactive waste containers (3)
- Retention (3)
- Simulation (3)
- Stress relaxation (3)
- Target (3)
- Testing (3)
- Thermal Test (3)
- Transport Package (3)
- Transportation (3)
- Welding (3)
- (U)HMWPE (2)
- 1-m-punch-bar-drop-test (2)
- Accident Scenario (2)
- Advanced experimental (2)
- Ageing management (2)
- Ageing mechanisms (2)
- Aging management (2)
- Analysis (2)
- Assessment method (2)
- Bolt design (2)
- Brittle Fracture (2)
- Calorimeter (2)
- Calorimetric test (2)
- Coefficient of Friction (2)
- Combustion (2)
- Compression Set (2)
- Container for radioactive waste (2)
- Cylindrical Cask (2)
- DLO (2)
- DPC (2)
- Design approval (2)
- Design assessment of RAM packages (2)
- Drop (2)
- Dual Purpose Cask (2)
- Dual purpose casks (2)
- Ductile Cast Iron (2)
- Ductile cast iron (2)
- Dynamic impact tests (2)
- Editorial (2)
- Elastomer (2)
- Elastomers (2)
- Encapsulations for damaged spent nuclear fuel (2)
- Experiment (2)
- Extended interim storage (2)
- Failure analysis (2)
- Finite Element Simulation (2)
- Finite element method (2)
- Fire Qualification (2)
- Fire Test Stand (2)
- Gefahrgut (2)
- Guide (2)
- H2 Fire (2)
- Heat flux sensor (2)
- High level waste (2)
- Hot cell testing (2)
- Hydrogen (2)
- IAEA Fire (2)
- IAEA Regu-lations (2)
- IAEA Thermal Test (2)
- ISO (2)
- Internal gaps (2)
- Internal shock absorber (2)
- Irradiation (2)
- Leakage Rate (2)
- Length of puncture bar (2)
- Load attachment (2)
- Load cycles (2)
- Management (2)
- Manufacturing (2)
- Materials (2)
- Measurement methods (2)
- Mechanical assessment (2)
- Mechanism (2)
- Metallic seal (2)
- New package design (2)
- Non-approved (2)
- Numerical Simulation (2)
- Numerical approach (2)
- Numerical modelling (2)
- O-ring (2)
- Polyethylene (2)
- Propane gas fire (2)
- Puncture bar test (2)
- Quality assurance (2)
- RAM packages (2)
- Radial hydrides (2)
- Radioactive Materials (2)
- Radioaktive (2)
- SHPB (2)
- SNF (2)
- SSR-6 (2)
- Safety assessment (2)
- Sea (2)
- Seal Behavior (2)
- Sequential analysis (2)
- Ship (2)
- Shock absorber (2)
- Smoldering (2)
- Special encapsulation (2)
- Spent fuel characterisation (2)
- Spent fuel characterization (2)
- Spent fuel performance (2)
- Stowage (2)
- Surveillance (2)
- Test (2)
- Thermal package testing (2)
- Time-temperature superposition (2)
- Transport Packages (2)
- Transport and storage cask (2)
- Transport of radaioactive materials (2)
- Transport of radioactive materials (2)
- Transport safety (2)
- Transportbehälter (2)
- Trunnion (2)
- Valve (2)
- WAXD (2)
- ACT (1)
- Acceleration values (1)
- Accelerometer (1)
- Accident Conditions of Transport (1)
- Accurate-Numerical-Methods (1)
- Activation energy (1)
- Activity release (1)
- Adiabatic surface temperature (1)
- Aluminum seal (1)
- Antragsverfahren (1)
- BAM TTS (1)
- BAM-GGR 023 (1)
- Battery (1)
- Bauartprüfung (1)
- Beförderung (1)
- Brennelementverhalten (1)
- Brittle failure (1)
- Burn-up (1)
- Burning (1)
- CSR (1)
- Changes with time (1)
- Chemical processes (1)
- Cladding alloy (1)
- Coefficient of thermal expansion (1)
- Combustion Chamber (1)
- Competent authority (1)
- Component test (1)
- Component tests (1)
- Concepts (1)
- Concrete (1)
- Container Safety (1)
- Container design testing procedure (1)
- Containment (1)
- Containment analysis (1)
- Content simulation (1)
- Continuous compression stress relaxation (1)
- Convection (1)
- Criticality safety analysis (1)
- Cross-linking (1)
- Crosslinking (1)
- DMA (1)
- Degradative processes (1)
- Disposal container (1)
- Dissolution behaviour (1)
- Dynamic Tensile Test (1)
- ENSA (1)
- Elastomer Seals (1)
- Elastomer seal (1)
- Elastomeric seals (1)
- Electro-Magneto-Mechanical (1)
- Energy release (1)
- European Guide (1)
- Extended storing (1)
- FE-Berechnungen (1)
- FEA (1)
- FTIR (1)
- Failure Mechanism (1)
- Final Disposal (1)
- Final disposal (1)
- Final disposal container (1)
- Final storage (1)
- Finite Element Mesh Transition (1)
- Finite element anaylsis (1)
- Finite-element-analysis (1)
- Fire Reference (1)
- Fire Reference Test (1)
- Fire reference (1)
- Fre (1)
- Fuel assemblies (1)
- Fuel cladding integrity (1)
- Fuel rod behavior (1)
- Fuel rods (1)
- GUR (1)
- Gamma irradiation (1)
- Generalized Newmark-alpha (1)
- Glass transition (1)
- Guidance material (1)
- HLW (1)
- Hardness (1)
- Heat Flux (1)
- Heat emission (1)
- Helical spring (1)
- Heterogeneous ageing (1)
- High temperature (1)
- High-Order (1)
- High-Order Methods (1)
- Hot cell (1)
- Hydride precipitation (1)
- IAEA fire (1)
- IAEA fire testing (1)
- IAEA regulations (1)
- IRHD (1)
- IRHD micro hardness (1)
- IRHD microhardness (1)
- Impact Limiters (1)
- Impact factor (1)
- Imperfectly mounted reinforcement cage (1)
- Indenter modulus (1)
- Independent Surveillance (1)
- Intermittent compression stress relaxation (1)
- Internal collision (1)
- Intumescent material (1)
- KONRAD (1)
- Kineatic aspects (1)
- Kinematic (1)
- Kinetic study (1)
- Ladungssicherung (1)
- Large objects (1)
- Large scale fire testing (1)
- Large scale testing (1)
- Lastanschlag (1)
- Leak-tightness (1)
- Leaktightnes (1)
- Levitation (1)
- Levitation Device (1)
- Lid temperature (1)
- Lid-system (1)
- Lifetime (1)
- Long term investigation (1)
- Long-term interim storage (1)
- Long-term investigation (1)
- Long-term safety (1)
- Low temperature investigation (1)
- Lowlevel and midlevel radioactive waste (1)
- Lowlevel midlevel radioactive waste (1)
- Lupolen (1)
- MID IR Spectroscopy (1)
- Machine element (1)
- Maintenance (1)
- Management system (1)
- Manufacturing tolerances (1)
- Material properties (1)
- Maxwell equations (1)
- Mechanical and thermal behaviour (1)
- Mechanical testing (1)
- Mechanik (1)
- Metal Seal (1)
- Metal Seals (1)
- Modeling (1)
- Multi-Modal Transportation Test (1)
- NCT (1)
- Nicht zulassungspflichtig (1)
- Not requiring competent authority approval (1)
- Nuclear Fuel (1)
- O Ring (1)
- O-Ring (1)
- O-ring metal seal (1)
- Oxidation (1)
- Oxygen permability (1)
- PU-Foam (1)
- Package safety (1)
- Package types (1)
- Packages (1)
- Partial crystalline (1)
- Periodic inspections (1)
- Physical relaxation (1)
- Plastic Instability (1)
- Polymer Testing (1)
- Polyurethane Foam (1)
- Polyurethane Foam, Impact Limiters, PU-Foam (1)
- Pprestressed bolt connection (1)
- Predisposal (1)
- Pressure build-up (1)
- Processes (1)
- Propane gas (1)
- Prototyp (1)
- Puncture test (1)
- Quality (1)
- Quality Assurance Measures (1)
- Quality management system (1)
- Qualitätsmanagement (1)
- Radial Hydrides (1)
- Radiation (1)
- Radioactive materials (1)
- Radioactive materials transport (1)
- Radioactive waste management (1)
- Radioactve (1)
- Radioaktiv (1)
- Rapid partial release (1)
- Rate-dependent Materials (1)
- Real transport (1)
- Recovery (1)
- Reference (1)
- Reinforced concrete containers (1)
- Relaxation (1)
- Requirements (1)
- Routine conditions of transport (1)
- Rubber seals (1)
- Rückbau kerntechnischer Anlagen (1)
- SCO-III (1)
- SNL (1)
- Safety report (1)
- Scale/shift factor and form/stretchFactor of time-temperature relation (1)
- Scission (1)
- Seal behavior (1)
- Seal failure (1)
- Sealed sources (1)
- Sealing (1)
- Sensitivity analysis (1)
- Silver seal (1)
- Similarity (1)
- Slap-down (1)
- Slug (1)
- Spent Fuel (1)
- Spent fuel behaviour (1)
- Spent nuclear fuel management (1)
- Spruce wood (1)
- Stacking test (1)
- Stochastic variation of material properties (1)
- Storage and transportation casks (1)
- Storage system components (1)
- Storing spent fuel (1)
- Strahlenschutz (1)
- Stress Wave Propagation (1)
- TTS (1)
- Tests (1)
- Thermal expansion (1)
- Thermal properties (1)
- Thermal simulation (1)
- Thermik (1)
- Thermo-rheologically simple/complex behaviour (1)
- Thermo-viscoplasticity (1)
- Thin Rod (1)
- Tightness (1)
- Time-temperature superposition principle (1)
- Time-temperature superposition/equivalent principle (1)
- Transport casks (1)
- Transport package for radioactive materials (1)
- Transport packages for radioactive material (1)
- Transportation and storage cask (1)
- Trunnion design (1)
- Ttransport (1)
- Typ (1)
- Typ-B Versandstück (1)
- Type A (1)
- Type A package (1)
- UF6 (1)
- Ultra high molecular weight (1)
- Ultra high molecular weight polyethylene (1)
- Unknown storage duration (1)
- Uranhexaflourid (1)
- Useable resilience (1)
- Very long term storage (1)
- Verzögerungswerte (1)
- Wet Content (1)
- Wood fire (1)
- ZIRLO® (1)
- Zulassung (1)
- Zulassungen (1)
- bended arrow of time (1)
- degradation (1)
- leakage (1)
- radioactive waste (1)
- radioaktives Material (1)
- rubber (1)
- stress relaxation (1)
- time-temperature equivalent formulation (1)
- time-temperature superposition principle (1)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (254) (entfernen)
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (120)
The mechanical and thermal loadings associated with the routine, normal and accident conditions of transport can have a significant effect on the leak tightness of the containment system of transport casks for spent fuel and high radioactive waste. The containment systems of such transport casks usually include bolted lids with metallic or elastomeric seals.
Scaled cask models are often used for providing the required mechanical and thermal tests series. Leak tests have been conducted on those models.
It is common practice to use scaled component tests to investigate the influence of deformations or displacements of the lids and the seals on the standard leakage rate as well as to study the temperature and time depending alteration of the seals.
In this paper questions and open points of the transferability of scaled test results to the fullscale design of the containment system will be discussed.
Low temperature performance of rubber seals - Influence of crystallite formation on seal performance
(2018)
Rubbers are widely used as sealing materials in various applications. In many fields the function of seal materials at low temperatures is necessary. Therefore, the understanding of failure mechanisms that lead to leakage at low temperatures is of high importance.
It is known that rubbers possess strongly temperature dependent material properties. At low temperatures high changes in the material properties are observed which can be caused by the rubber-glass transition (abbr. glass transition) or for some rubbers also by partial crystallisation at lower temperatures. During continuous cooling the material changes during rubber-glass transition from rubber-like entropy-elastic behaviour to stiff energy-elastic behaviour. In case of (thermal-) crystallisation the formed crystallites act as additional (physical) crosslinks within the material but the molecules in the amorphous phase can still behave like a rubber. Hence, rubbers are normally used above rubber-glass transition and (thermal-) crystallization temperature but the minimum working temperature limit is heavily depending on the application conditions. Therefore, the lower operation temperature limit of rubber seals is under investigation.
In the past we have investigated material properties and sealing behaviour of rubber seals at low temperatures. As the initial work was dedicated to purely static sealing conditions we started to investigate the effect of a small partial release of rubber seals at low temperatures to study the influence of dynamic events on leak tightness. In addition, other groups report on the influence of counterpart surface and adhesion.
In this contribution we focus on the difference between purely amorphous elastomers and elastomers which become partially crystalline at low temperatures. The influence of partial crystallization on the low temperature performance of rubber seals is discussed.
Numerical approach to determine the correct puncture bar length for the IAEA puncture bar drop test
(2018)
Among other mechanical tests the 1 meter drop onto a steel puncture bar shall be considered for accident safe packages for the transport of radioactive material. According with the IAEA regulations “the bar shall be of solid mild steel of circular section, 15.0 ± 0.5 cm in diameter and 20 cm long, unless a longer bar would cause greater damage…”. The most damaging puncture bar length can be estimated by iterative processes in numerical simulations. On the one hand, a sufficient puncture bar length has to guarantee that shock absorbers or other attachments do not prevent or reduce the local load application to the package, on the other hand, a longer and thus less stiff bar causes a smaller maximum contact force. The contrary influence of increasing puncture bar length and increasing effective drop height shall be taken into account if a shock absorber is directly placed in the target area. The paper presents a numerical approach to identify the bar length that causes maximum damage to the package. Using the example of two typical package masses the sensitivity of contact forces and puncture bar deformations to the initial length are calculated and assessed with regard to the international IAEA package safety requirements.
The containment systems of transport casks for spent fuel and high radioactive waste usually include bolted lids with metallic or elastomeric seals.
The mechanical and thermal loadings associated with the routine, normal and accident conditions of transport can have a significant effect on the leak tightness of such containment system.
Scaled cask models are often used for providing the required mechanical and thermal tests series. Leak tests have been conducted on those models.
It is also common practice to use scaled component tests to investigate the influence of deformations or displacements of the lids and the seals on the standard leakage rate as well as to study the temperature and time depending alteration of the seals.
In this paper questions of the transferability of scaled test results to the full size design of the containment system will be discussed.
Elastomers show a high versatility which makes them ideal materials for sealing applications in various fields. Especially under changing application conditions the high recovery potential of this class of material is beneficial to compensate temperature or pressure fluctuation, and geometrical changes resulting from mechanical loads in e.g. accident conditions. Out of these reasons elastomers are also used in containers for low and intermediate level radioactive waste and for spent fuel transportation casks. In casks designed for low and intermediate level waste elastomer seals can act as primary seal responsible for the containment function whereas in spent fuel storage and transportation casks (dual purpose casks (DPC)) elastomer seals are used as auxiliary seals to allow leakage rate measurements of metal barrier seals. An inherent prerequisite for this kind of application is the Long time-scale of operation without or with limited possibility of seal replacement. In Germany an interim storage license for DPC`s is typically issued for 40 years, a timeframe which might increase in the future due to challenges of the final repository siting procedure. For low and intermediate level waste, also long time periods are required before final disposal can be achieved. Therefore, the performance of elastomer seals over extended time periods is, as for other applications, of high importance.
A typical approach to ensure long-term functionality is to perform accelerated aging tests to calculate an estimated lifetime by assuming e.g. Arrhenius like equations for the timetemperature relationship. This approach requires a suitable end of life criterion considering the application of interest. This often can represent a challenge on its own.
As BAM is involved in most of the cask licensing procedures and especially responsible for the evaluation of cask-related long-term safety issues we initiated several test programs for investigating the behavior of elastomer seals. Experiments concerning the low temperature performance down to -40 °C and the influence of gamma irradiation have been started first.
Currently the thermal aging behavior of elastomer seals, which is the topic of this contribution, is examined. For our aging investigations we use a broad approach to first determine the property changes in different elastomer materials due to thermo-oxidative aging at elevated temperatures and secondly, we test how the typical methods of lifetime extrapolation can be applied to these results. This Approach enables us to detect and exclude undesired side effects which very often influence lifetime estimations. In this contribution, our recent results are extended. The results show that lifetime estimation based on single material properties can be misleading and therefore a combination of several methods is recommended.
The Bundesanstalt für Materialforschung und –Prüfung (BAM) runs an investigation program on the long-term behavior of multi-component metal seals. Such seals are used in a wide area of applications including transport and storage casks for spent nuclear fuel and high level radioactive waste.
The seal function is mainly based on the compression of the inner helical spring, which generates the necessary seal force to keep the sealing surfaces in close contact. This in turn leads to a plastic deformation of the outer jacket of the seal, comprised of highly ductile aluminum or silver that adapts to the sealing surfaces of cask body and bolted lid, thus providing high Level leak tightness. In Germany, those casks are licensed for Interim storage periods of up to 40 years or more if extended Interim storage would become necessary before a final repository is available. Thus, the sealing performance has to be evaluated, including factors like elevated temperature due to decay heat or mechanical loads due to transport under normal as well as accident conditions. Long-term investigations at BAM have been running over the last nine years to identify and evaluate the seal performance by measuring the remaining seal force, the useable resilience and the leakage rate after various time intervals at temperatures ranging from room temperature up
to 150 °C. It was found that the seal force and useable resilience decrease with time and temperature, caused by creep deformation of the outer jacket. In order to obtain an analytical description for the seal behavior and to achieve more information on the material behavior under application conditions a comprehensive investigation program with Focus on aluminum as outer jacket material was launched. The program includes material investigations such as compression and tension creep tests with representative basic materials. An additional test setup allows for the continuous measurement of the remaining seal force at temperatures of up to 150 °C. Furthermore, seal segments are compressed and stored in heating chambers, thus producing segments at different stages of the aging process. The segments are investigated regarding the development of the contact area width, jacket thickness and microstructural changes. This data will be used to develop material models and an analytical description of the time and temperature dependent long-term sealing behavior. This paper explains the current status of gained test results and modelling approaches and closes with an outlook to the future Project plans.
Elastomers show a high versatility which makes them ideal materials for sealing applications in various fields. Especially under changing application conditions the high recovery potential of this class of material is beneficial to compensate temperature or pressure fluctuation, and geometrical changes resulting from mechanical loads in e.g. accident conditions. Out of these reasons elastomers are also used in containers for low and intermediate level radioactive waste and for spent fuel transportation casks. In cask designed for low and intermediate level waste elastomer seals can act as primary seal responsible for the containment function whereas in spent fuel storage and transportation casks (dual purpose casks (DPC)) elastomer seals are used as auxiliary seals to allow leakage rate measurements of metal barrier seals. An inherent prerequisite for this kind of application is the long time-scale of operation without or with limited possibility of seal replacement. In Germany an interim storage license for DPC`s is typically issued for 40 years, a timeframe which might increase in future due to challenges of the final repository siting procedure. For low and intermediate level waste, also long time periods are required before final disposal can be achieved. Therefore, the performance of elastomer seals over extended time periods is, as for other applications, of high importance.
A typical approach to ensure long-term functionality is to perform accelerated aging tests to calculate an estimated lifetime by assuming e.g. Arrhenius like equations for the time-temperature relationship. This approach requires a suitable end of life criterion considering the application of interest. This often can represent a challenge on its own.
As BAM is involved in most of the cask licensing procedures and especially responsible for the evaluation of cask-related long-term safety issues we initiated several test programs for investigating the behavior of elastomer seals. Experiments concerning the low temperature performance down to -40°C and the influence of gamma irradiation have been started first. Currently the thermal aging behavior of elastomer seals, which is the topic of this contribution, is examined.
For our aging investigations we use a broad approach to first determine the property changes in different elastomer materials due to thermo-oxidative aging at elevated temperatures and secondly we test how the typical methods of lifetime extrapolation can be applied to these results. This approach enables us to detect and exclude undesired side effects which very often influence lifetime estimations. In this contribution, our recent results are discussed.
The Bundesanstalt für Materialforschung und –prüfung (BAM) runs an investigation program on the long-term behavior of multi-component metal seals. Such seals are used in a wide area of applications including transport and storage casks for spent nuclear fuel and high level radioactive waste. The seal function is mainly based on the compression of the inner helical spring, which generates the necessary seal force to keep the sealing surfaces in close contact. This in turn leads to a plastic deformation of the outer jacket of the seal, comprised of highly ductile aluminum or silver that adapts to the sealing surfaces of cask body and bolted lid, thus providing high level leak tightness. In Germany, those casks are licensed for interim storage periods of up to 40 years or more if extended interim storage would become necessary before a final repository is available. Thus, the sealing performance has to be evaluated, including factors like elevated temperature due to decay heat or mechanical loads due to transport under normal as well as accident conditions. Long-term investigations at BAM have been running over the last nine years to identify and evaluate the seal performance by measuring the remaining seal force, the useable resilience and the leakage rate after various time intervals at temperatures ranging from room temperature up to 150 °C. It was found that the seal force and useable resilience decrease with time and temperature, caused by creep deformation of the outer jacket. In order to obtain an analytical description for the seal behavior and to achieve more information on the material behavior under application conditions a comprehensive investigation program with focus on aluminum as outer jacket material was launched. The program includes material investigations such as compression and tension creep tests with representative basic materials. An additional test setup allows for the continuous measurement of the remaining seal force at temperatures of up to 150 °C. Furthermore, seal segments are compressed and stored in heating chambers, thus producing segments at different stages of the aging process. The segments are investigated regarding the development of the contact area width, jacket thickness and microstructural changes. This data will be used to develop material models and an analytical description of the time and temperature dependent long-term sealing behavior. This paper explains the current status of gained test results and modelling approaches and closes with an outlook to the future project plans.
In Germany spent nuclear fuel and high level radioactive waste is stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. The used metal seals consist of three components as can be seen in the cross-sectional view in Figure 1. The innermost part is a helical spring that is surrounded by an inner jacket made of stainless steel. The outer jacket that is made of a softer material which in case of assembly in the aforementioned storage containers is silver or aluminum (i.e. Al 99.5). During application the seal is compressed and due to the restoring force of the helical spring, the outer jacket is plastically deformed and adapts to the sealing surface. Hence, leakage paths are closed and the sealing function is generated. In Germany the above-mentioned containers are licensed for up to 40 years of interim storage, which in case extended storage becomes necessary before a final repository is available will have to be extended to even longer periods. Therefore, the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads as well.
At Bundesanstalt für Materialforschung und –prüfung (BAM) long-term investigations are being conducted in which seals are assembled in test flanges and aged at temperatures ranging from room temperature to 150°C for accelerated aging. The aged seals are tested semi-annually (after the first 6 months in which the seals are tested more frequently) regarding the sealing performance, the remaining seal force, and the useable resilience upon decompression. Results of these investigations have been published over the past years (e.g. Grelle, Wolff, Probst, Jaunich, & Völzke, 2017; Völzke, Wolff, Probst, Nagelschmidt, & Schulz, 2014). It was found that the seal force and the useable resilience decrease with time and temperature, which is in agreement with the result of other studies (Sassoulas et al., 2006; Wataru et al., 2016) as well. Geometry change of the outer jacket has been identified as the main reason for this seal behavior. At the prevailing operating temperatures and stresses the aluminum is subjected to creep deformation leading to a thinning of the outer jacket. Since the seal groove depth remains unchanged the helical spring expands, which in turn leads to a decrease of the generated spring and seal force.
Although the main reason for the change of seal parameters over time and temperature is known, a detailed characterization of the seal behavior and a reliable prediction of the parameter development for aging times that exceed the experimental time frame have not been possible, yet.
For deeper understanding of the aging processes, an Investigation program, which is covered in this contribution, is conducted at Bundesanstalt für Materialforschung und –prüfung (BAM) that focusses on the behavior of the aluminum jacket and its influence on the long-term sealing performance. The program investigates properties of material samples as well as the behavior of the seal as a component.
Original sheet material of the same aluminum that is used for manufacturing of the seals is investigated in compression creep tests. For this, a DMA (dynamic mechanical analysis) machine is employed (here used for static tests) that allows for a measurement of the specimens deformation under forces of up to 500 N. The advantage of this method is that the original material can be tested in the same shape as used for the seals which is 0.5 mm thick sheet material. For investigation of tensile creep standard specimens are used, that were machined from surrogate material of the same composition and annealing condition.
Furthermore, aluminum seals that are cut into smaller segments are assembled in flanges and placed in heating chambers at temperatures ranging from 23°C to 150°C. After different periods of time from 3 days to 300 days the segments are taken out of the flanges and are investigated, thus giving information on different states of aging. Measurements of the development of the seal contact width and the aluminum jacket thickness are done with an optical microscope. Further investigations on the segments will include metallography and hardness measurements.
From the detailed material and component behavior including the results of the long-term seal force and useable resilience investigations a better understanding of the overall seal behavior can be gained. The aim is to contribute to the development of material models and analytical approaches for the prediction of the sealing behavior in dependence of time and temperature.
In Germany spent nuclear fuel (SNF) and high level radioactive waste (HLW) are stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. Being licensed for up to 40 years of interim storage the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads.
Among other mechanical tests the 1 meter drop onto a steel puncture bar shall be considered for accident safe packages for the transport of radioactive material. According with the IAEA regulations “the bar shall be of solid mild steel of circular section, 15.0 ± 0.5 cm in diameter and 20 cm long, unless a longer bar would cause greater damage…”. The most damaging puncture bar length can be estimated by iterative processes in numerical simulations. On the one hand, a sufficient puncture bar length has to guarantee that shock absorbers or other attachments do not prevent or reduce the local load application to the package, on the other hand, a longer and thus less stiff bar causes a smaller maximum contact force. The contrary influence of increasing puncture bar length and increasing effective drop height shall be taken into account if a shock absorber is directly placed in the target area. The paper presents a numerical approach to identify the bar length that causes maximum damage to the package. Using the example of two typical package masses the sensitivity of contact forces and puncture bar deformations to the initial length are calculated and assessed with regard to the international IAEA package safety requirements.
Component and material investigations on metal seals for high level radioactive waste containers
(2018)
In Germany casks for interim storage of spent nuclear fuel and high level radioactive waste are equipped with Helicoflex® metal seals as main sealing barrier of the double lid system. The long-term behaviour of those seals is investigated at Bundesanstalt für Materialforschung und –prüfung (BAM) in order to evaluate the safety function of the containment at different temperatures over storage periods of 40 years or more in case extended interim storage becomes necessary.
Long-term investigations have been done for ageing times of up to 8.5 years at temperatures ranging from room temperature to 150 °C. It was found that the seal force and useable resilience decrease over time, which is mainly caused by creep deformation of the aluminium (or silver) outer jacket of the seals. This effect becomes stronger with increasing temperature.
The ageing processes of the seal material and the overall seal behaviour is under investigation in order to derive analytical descriptions for the long-term seal performance. Thus, standardized tests on the basic seal materials, with focus on aluminium, and additional investigations on the seals as a component are conducted. The current investigations include compression and tension creep measurements as well as tensile testing. Furthermore, ageing of seal segments provides information on the development of the contact area width, jacket thickness and microstructural changes in dependence of time and temperature. The obtained data are used for the development of material models and an analytical approach to describe and predict the time and temperature dependent sealing behaviour in the long-term.
This presentation focusses on the thermal test of a typical storage container design for the German final storage repository KONRAD. The preparation of the container, the conduction of the fire test itself and results like the temperature evolution and as-sumptions for thermal material properties are shown.
As thermal test final storage containers have to be exposed to a fire of 800 °C (1472 °F) for 1 hour according to the final storage conditions provided by the federal com-pany for radioactive waste disposal (BGE). The here discussed cask contains a steel covered concrete layer of a thickness of 100/150 mm. Heating up concrete is a highly nonlinear process since the vaporization of residual water consumes high amounts of thermal energy and produce vast amounts of steam.
The constantly measured temperatures provide the basis to adjust common models of thermal properties for concrete esp. for FEAs. Finally in a later step this will allow predictions of similar designed container with different sizes.
The presentation provides an overview about the understanding of fuel cladding failure mechanisms dominated by hydride embrittlement during long term dry storage. A currently launched research project focuses on the development of a fracture mechanics approach to describe brittle failure of fuel cladding during long term interim storage (BRUZL)“. Finally, the BAM contribution to the current European Joint Program (EJP) on radioactive waste management is illustrated.
Ongoing R&D work at BAM
(2018)
The presentation provides an update on the German nuclear waste management policy towards final disposal and related reasearch at BAM. Topics include long term investigations of metal seals, investigations of fuel cladding failure mechanisms, and the development of requirements and concepts for high level radioactive waste and spent fuel disposal containers.
The properties of spent nuclear fuel (SNF) rods change significantly during their operation life in the reactor core. Further changes occur after their discharge mainly due to the heating-cooling processes and possible ageing associated with the cumulative effects of radioactive decay induce damage in the fuel. Such changes may affect the response of the SNF rods to mechanical solicitations corresponding to normal and accidental conditions.
Research activities at JRC-KARLSRUHE aim at assessing the integrity of SNF rods and processes which might affect their mechanical properties during their interim storage, transport or other handling operations. JRC Hot Cell facilities have been fully adapted to fulfil the experimental goals. The number of experiments that can be performed, however, is limited and there is an acute need to model them, using this process to validate codes, to deeper understand and to extend the results gained at the JRC beyond the conditions that have been tested. For the experimental campaigns two devices for gravitational impact and 3-point bending tests were developed and installed in a hot cell. Segments of real SNF rods pressurized at their original pressures after discharge have been investigated. The setup is fully operational and new results are reported continuously.
Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood. Mostly this wood is encapsulated by steel sheets. The impact limiters are needed to ensure that the transport casks meet the IAEA safety requirements. According to the IAEA safety requirements a package has to withstand consecutively severe mechanical tests followed by a thermal test. The mechanical tests have to produce maximum damage concerning the thermal test. Following this, the impact limiters may have serious pre-damage when the thermal tests begins. The IAEA safety requirements state that during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally.
Small scale fire tests with wood filled metal drums by BAM and works of the French Institute for Radiological Protection and Nuclear Safety (IRSN) showed that pre-damaged steel encapsulated wooden structures could start smoldering initiated by the thermal test. These processes supply additional energy to the cask which should be considered within the safety assessment of the package.
As not much is known about smoldering processes in encapsulated wooden structures with a reduced oxygen supply the need for a test was identified. To investigate the influence of a smoldering impact limiter concerning the amount of energy supplied to the cask in dependence of the time BAM conducted a large scale impact limiter thermal test. For that, a pre-damaged impact limiter with a diameter of 2,3 m was mounted on a water tank simulating a cask. A complex system of a regulated pump, a heater, a cooler, a slide valve, a flow meter and numerous thermocouples were installed and connected to a control unit to ensure all needed operating conditions.
After a pre-heating compared to typical SNF decay-heat, the 30 min lasting fire phase of the thermal test was started. After that, the expected and initiated smoldering began. The results of the large scale test are presented in this poster. Systematic small scale tests will follow to identify the influence of different parameters, e.g. moisture content and scale effects. The tests took place at BAM Test Site for Technical Safety (TTS) with its various possibilities for mechanical and thermal tests. The results of these tests will have direct influence in the safety assessment of transport cask for the transport of radioactive material.
Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood. Mostly this wood is encapsulated by steel sheets. The impact limiters are needed to ensure that the transport casks meet the IAEA safety requirements. According to the IAEA safety requirements a package has to withstand consecutively severe mechanical tests followed by a thermal test. The mechanical tests have to produce maximum damage concerning the thermal test. Following this, the impact limiters may have serious pre-damage when the thermal tests begins. The IAEA safety requirements state that during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally.
Small scale fire tests with wood filled metal drums by BAM and works of the French Institute for Radiological Protection and Nuclear Safety (IRSN) showed that pre-damaged steel encapsulated wooden structures could start smoldering initiated by the thermal test. These processes supply additional energy to the cask which should be considered within the safety assessment of the package.
As not much is known about smoldering processes in encapsulated wooden structures with a reduced oxygen supply the need for a test was identified. To investigate the influence of a smoldering impact limiter concerning the amount of energy supplied to the cask in dependence of the time BAM conducted a large scale impact limiter thermal test. For that, a pre-damaged impact limiter with a diameter of 2,3 m was mounted on a water tank simulating a cask. A complex system of a regulated pump, a heater, a cooler, a slide valve, a flow meter and numerous thermocouples were installed and connected to a control unit to ensure all needed operating conditions.
After a pre-heating compared to typical SNF decay-heat, the 30 min lasting fire phase of the thermal test was started. After that, the expected and initiated smoldering began. The results of the large scale test are presented in this poster. Systematic small scale tests will follow to identify the influence of different parameters, e.g. moisture content and scale effects. The tests took place at BAM Test Site for Technical Safety (TTS) with its various possibilities for mechanical and thermal tests. The results of these tests will have direct influence in the safety assessment of transport cask for the transport of radioactive material
Packages for the transport of radioactive material are often equipped with impact limiters consisting of wood. Mostly this wood is encapsulated by steel sheets. The impact limiters are needed to ensure that the transport casks meet the IAEA safety requirements. According to the IAEA safety requirements a package has to withstand consecutively severe mechanical tests followed by a thermal test. The mechanical tests have to produce maximum damage concerning the thermal test. Following this, the impact limiters may have serious pre-damage when the thermal tests begins. The IAEA safety requirements state that during and following the fire test, the specimen shall not be artificially cooled and any combustion of materials of the package shall be permitted to proceed naturally.
Small scale fire tests with wood filled metal drums by BAM and works of the French Institute for Radiological Protection and Nuclear Safety (IRSN) showed that pre-damaged steel encapsulated wooden structures could start smoldering initiated by the thermal test. These processes supply additional energy to the cask which should be considered within the safety assessment of the package.
As not much is known about smoldering processes in encapsulated wooden structures with a reduced oxygen supply the need for a test was identified. To investigate the influence of a smoldering impact limiter concerning the amount of energy supplied to the cask in dependence of the time BAM conducted a large scale impact limiter thermal test. For that, a pre-damaged impact limiter with a diameter of 2,3 m was mounted on a water tank simulating a cask. A complex system of a regulated pump, a heater, a cooler, a slide valve, a flow meter and numerous thermocouples were installed and connected to a control unit to ensure all needed operating conditions.
After a pre-heating compared to typical SNF decay-heat, the 30 min lasting fire phase of the thermal test was started. After that, the expected and initiated smoldering began. The results of the large scale test are presented in this poster. Systematic small scale tests will follow to identify the influence of different parameters, e.g. moisture content and scale effects. The tests took place at BAM Test Site for Technical Safety (TTS) with its various possibilities for mechanical and thermal tests. The results of these tests will have direct influence in the safety assessment of transport cask for the transport of radioactive material.
Intermediate level waste often contains residual water or other liquids. The liquids can be decomposed due to radiolysis and can also vaporize especially under fire impact. These pressure generating processes are described. One example for the pressure determination inside a closed cask is discussed using two different approaches: analytical and CFD