Präsentation
Filtern
Dokumenttyp
- Vortrag (420)
- Posterpräsentation (88)
- Beitrag zu einem Tagungsband (9)
Sprache
- Englisch (340)
- Deutsch (176)
- Mehrsprachig (1)
Schlagworte
- Hydrogen (28)
- Safety (26)
- Ageing (21)
- Gefahrgut (21)
- Gefahrguttransport (21)
- Gefahrgutverpackungen (18)
- Transport (18)
- Wasserstoff (18)
- Drop test (16)
- Dangerous Goods Database (14)
- Datenbank GEFAHRGUT (14)
- Lithiumbatterien (13)
- Ring Compression Test (13)
- Spent Nuclear Fuel (13)
- Ageing Management (12)
- Database (12)
- Datenbank (12)
- Fachinformationssystem (12)
- Fire (12)
- H2Safety@BAM (12)
- Kennzeichnung (12)
- Sicherheit (12)
- Umweltgefahr (12)
- Cladding Embrittlement (11)
- IAEA (11)
- LNG (11)
- Compression set (10)
- Dangerous goods packagings (10)
- Degradation (10)
- Extended Storage (10)
- Fibre break (10)
- Metal seal (10)
- BAM List (9)
- BAM-Liste (9)
- Dangerous Goods Quickinfo (9)
- Dangerous goods (9)
- Gefahrgut-Schnellinfo (9)
- Gefahrgutdatenpool (9)
- Informationssystem (9)
- Kurzinfo (9)
- LH2 (9)
- Labelling (9)
- Modul für radioaktive Stoffe (9)
- Multiscale model (9)
- Radioactive Materials Module (9)
- Seal (9)
- Transport Documents Module (9)
- Composite (8)
- Druckbehälter (8)
- Lithium Ion Batteries (8)
- Radioaktive Stoffe (8)
- Reduced volume method (8)
- Wasserstoffspeicher (8)
- Wood (8)
- ADR (7)
- Composite pressure vessels (7)
- Dangerous Goods (7)
- Modul für Beförderungspapier (7)
- Pressure vessel (7)
- Specialised Information System (7)
- Thermal Runaway (7)
- Transport packages (7)
- Umweltgefährdend (7)
- Alterung (6)
- Biodiesel (6)
- Cladding (6)
- Composite pressure vessel (6)
- Fallprüfung (6)
- Integral range (6)
- Interim storage (6)
- Leakage rate (6)
- Lebensdauervorhersage (6)
- Markthochlauf (6)
- Radioactive (6)
- Radioactive material (6)
- Spent nuclear fuel (6)
- Assessment (5)
- Bewertung (5)
- Endlagerbehälter (5)
- Environmentally hazardous substance (5)
- Fire testing (5)
- Impact (5)
- Numerical simulation (5)
- Schallemissionsanalyse (5)
- Sift-proofness (5)
- Specialised information system (5)
- Structural health monitoring (5)
- TAHYA project (5)
- Tank (5)
- Tanks (5)
- Tensile properties (5)
- Transport package (5)
- Transportbehälter (5)
- Acceptance rate (4)
- Bauartprüfung (4)
- Behälter (4)
- Container (4)
- Creep (4)
- Dichtheit (4)
- Drop testing (4)
- Druck-Volumen-Produkt (4)
- Environmentally hazardous (4)
- FAME (4)
- Finite element method (4)
- Fuel rod (4)
- Gefahrgutdatenservice (4)
- HNBR (4)
- Leakage (4)
- Lithium Batterien (4)
- MLI (4)
- Monte-Carlo-Experiment (4)
- Package (4)
- Pressure vessels (4)
- Radioactive waste (4)
- Rail (4)
- Residual stress (4)
- Risikosteuerung (4)
- Road (4)
- Rubber (4)
- Schüttwinkel (4)
- Seals (4)
- Shore hardness (4)
- Smouldering (4)
- Spent fuel (4)
- Structural Health Monitoring (4)
- Transportation (4)
- Vessels (4)
- Zulassung (4)
- Acceleration (3)
- Alternative Antriebe (3)
- Aufprallfundament (3)
- Bags (3)
- Beförderung (3)
- Behälterversagen (3)
- Cargo (3)
- Catastrophe (3)
- Compatibility (3)
- Composite structures (3)
- Composite-Druckgefäße (3)
- Compression stress relaxation (3)
- Convection coefficient (3)
- Dangerous Goods Dataservice (3)
- Delfin (3)
- Discharge (3)
- Disposal (3)
- Endlager (3)
- Environmentally Hazardous (3)
- Experimental investigation (3)
- Extended Interim Storage (3)
- FKM (3)
- Fahrzeugbrand (3)
- Finite element analysis (3)
- Forschung (3)
- Friction (3)
- Fuel cladding (3)
- GD-OES (3)
- GFRP (3)
- Gefahrgutsäcke (3)
- Heizöl (3)
- Heizöllagerbehälter (3)
- Hochaktive wärmeentwickelnde Abfälle (3)
- Impact limiter (3)
- Katastrophe (3)
- Konsequenzbegrenzung (3)
- Lightweight design (3)
- Lithium-Batterien (3)
- Long-term behavior (3)
- Low temperature (3)
- Machine learning (3)
- Metallene Werkstoffe (3)
- Minimum burst ratio (3)
- Modal analysis (3)
- Modalanalyse (3)
- Modul für Beförderungspapiere (3)
- Nuclear fuel (3)
- Polyethylene (3)
- Propane (3)
- Propane gas fire test facility (3)
- Railway (3)
- Recherche (3)
- Regulations (3)
- Representative volume element (3)
- Ring compression test (3)
- Safety assessment (3)
- Simulation (3)
- Sloshing (3)
- Spent Fuel Characterization (3)
- Standards (3)
- Statistische Bewertung (3)
- Staubdichtheit (3)
- Storage (3)
- Structural dynamics (3)
- Thermal testing (3)
- Transport of Dangerous Goods (3)
- Zerstörungsfreie Prüfung (3)
- Zuständige Behörde (3)
- Zwischenlagerung (3)
- Acoustic emission (2)
- Ageing management (2)
- Akzeptanz (2)
- Alternative Kraftstoffe (2)
- Angle of repose (2)
- Approval (2)
- Arrhenius (2)
- Atmospheric (2)
- Back end (2)
- Bar length (2)
- Basic population (2)
- Battery (2)
- Baumusterzulassung (2)
- Behörde (2)
- Berstfestigkeit (2)
- Berstprüfung (2)
- Beständigkeit (2)
- Beständigkeitsbewertungen (2)
- Bewitterung (2)
- Boiling (2)
- Bolt connections (2)
- Brennelementverhalten (2)
- Bubble test (2)
- Burning (2)
- Burst ratio (2)
- CO2 Reduktion (2)
- Cohesive Zone Modelling (2)
- Combustion (2)
- Compatibility evaluations (2)
- Component testing (2)
- Consequence (2)
- Corrosion (2)
- DPC (2)
- Depth-profiling (2)
- Dichtung (2)
- Digital twin (2)
- Distributed fibre optic sensing (2)
- Driving (2)
- Druckgefäße (2)
- Dual Purpose Casks (2)
- EDX (2)
- EPDM (2)
- Energiespeicher (2)
- Environment (2)
- F-N-curve (2)
- FE-Berechnungen (2)
- FEM (2)
- FIB (2)
- FTIR (2)
- Failure analysis (2)
- Fallfundament (2)
- Fallfundamente (2)
- Fallprüfungen (2)
- Faseroptische Sensorik (2)
- Fiber optic sensors (2)
- Final repository Konrad (2)
- Finite-element-analysis (2)
- Fire Reference Test (2)
- Fire test (2)
- Fließfähigkeit (2)
- Flow properties (2)
- Flowability (2)
- Fracture initiation (2)
- Fragmentation (2)
- Full-scale (2)
- Gassensorik (2)
- Gefahrgutverpackung (2)
- Geführte Ultraschallwellen (2)
- Gesetzliche Aufgaben (2)
- Gremienarbeit (2)
- Hausner ratio (2)
- Hausner-Faktor (2)
- Heat flux (2)
- Heat flux sensor (2)
- Heating oil (2)
- Hybrid composite pressure vessel (2)
- Hydrogen safety (2)
- Impact target (2)
- Infrastructure (2)
- Insulation (2)
- Konrad (2)
- Korrosion (2)
- Lagerung (2)
- Lebensdauerüberwachung (2)
- Leckdetektion (2)
- Length of puncture bar (2)
- Liquid cargo (2)
- Liquid cargoes (2)
- Lithium-ion batteries (2)
- Marktüberwachung (2)
- Measurement (2)
- Mechanical assessment (2)
- Messtechnik (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Modelling (2)
- Monte Carlo Simulation (2)
- Monte-Carlo Simulation (2)
- Nageltest (2)
- Normung (2)
- Nuclear Fuel Cladding (2)
- Nuclear fuel cycle (2)
- Numerical Failure Analysis (2)
- O-Ring (2)
- Optische Fasern (2)
- Package design (2)
- Package testing (2)
- Plastic (2)
- Polyethylen (2)
- Pool fire (2)
- Powders (2)
- Pressure wave (2)
- Production scatter (2)
- Propane gas fire (2)
- Prüfstelle (2)
- Pulver (2)
- Puncture bar test (2)
- QI-Digital (2)
- RME (2)
- Radial hydrides (2)
- Radioactive Waste (2)
- Radioaktive Abfälle (2)
- Rail endurance (2)
- Regelwerk (2)
- Risk (2)
- Rubber seal (2)
- SEM (2)
- Sacks (2)
- Schallemission (2)
- Schallemissionsprüfung (2)
- Schädigungsgrad (2)
- Seal performance (2)
- Sealing materials (2)
- Shock absorber (2)
- Sloshing cargoes (2)
- Strahlenschutz (2)
- Structural Health Monitoring (SHM) (2)
- Survival rate (2)
- TAHYA Project (2)
- Target (2)
- Testing (2)
- Thermal Test (2)
- Thermal properties (2)
- Thermisches Durchgehen (2)
- Thermohydraulic (2)
- Tomography (2)
- Transport cask (2)
- Transport of radioactive materials (2)
- Type-B Package (2)
- Vehicle (2)
- Verwaltungsschale (2)
- Wiederkehrende Prüfung (2)
- Zulassungskriterium (2)
- Zuverlässigkeit (2)
- pV-Produkt (2)
- Überdruckverfahren (2)
- (U)HMWPE (1)
- 1-m-punch-bar-drop-test (1)
- 150 Jahre BAM (1)
- ACM (1)
- ACT (1)
- ADR 2019 (1)
- ATR Anerkanntes Technisches Regelwerk (1)
- Abschälprüfung (1)
- Abuse Tests (1)
- Acceleration values (1)
- Accelerometer (1)
- Accelerometers (1)
- Acceptance of a standard (1)
- Accident Conditions of Transport (1)
- Accident Scenario (1)
- Accidential Fire (1)
- Acid Dew and Fog (1)
- Acoustic emission analysis (1)
- Activation energy (1)
- Activity release (1)
- Adhäsionsprüfung (1)
- Adiabatic surface temperature (1)
- Advanced experimental (1)
- Aerial survey (1)
- Aged heating oil with 10% and 20% biodiesel (1)
- Ageing behaviour (1)
- Ageing mechanisms (1)
- Aging (1)
- Aging management (1)
- Aging mechanisms (1)
- Akzeptanzrate (1)
- Alternative Dichtheitsprüfverfahren (1)
- Aluminum seal (1)
- Analysis (1)
- Anderson Darling - GoF Test (1)
- Antragsteller (1)
- Arbeitsbereichs "Themenfeld Energie Gase" (1)
- Arbeitsflussdiagramm (1)
- Assess (1)
- Assessing (1)
- Assessment method (1)
- Atemluftflasche (1)
- Atemschutz (1)
- Auslegungsüberschreitend (1)
- Ausrüstung (1)
- Aussonderugnsrate (1)
- Automatisierung (1)
- Außenbesichtigung (1)
- B10 exposure (1)
- BAM Liste (1)
- BAM TTS (1)
- BAM-GGR (1)
- BAM-GGR 022 (1)
- BAM-GGR 023 (1)
- BAM-Gefahrgutregel (1)
- BGE TECHNOLOGY (1)
- Basic populaiton (1)
- Batch test (1)
- Batch testing (1)
- Batterie-Lagerung (1)
- Batterie-Transport (1)
- Battery Classification (1)
- Battery vehicle (1)
- Beförderung gefährlicher Güter (1)
- Behälteranforderungen (1)
- Behälterkonzepte (1)
- Belastungsversuch (1)
- Bending tests on pipe segments (1)
- Bergungsdruckgefäß (1)
- Berstversuch (1)
- Berufsgenossenschaft (1)
- Beschussprüfung (1)
- Bestrahlung (1)
- Beständigkeit in Biokraftstoffen (1)
- Beständigkeitsbewertung (1)
- Beständigkeitsuntersuchungen (1)
- Betriebsfestigkeit (1)
- Biobrennstoff (1)
- Bioelectrochemical CO2 reduction (1)
- Bioethanol (1)
- Biofuels (1)
- Biogene Brennstoffe (1)
- Bleve (1)
- Bogie´s centre (1)
- Bolt design (1)
- Borderline population (1)
- Braking (1)
- Brandprüfung (1)
- Brandschutzkonzepte (1)
- Brandversuch (1)
- Brandversuche (1)
- Brennelemente (1)
- Brennstoff (1)
- Brittle Fracture (1)
- Brittle failure (1)
- Bubble Test (1)
- Burn-up (1)
- Burst test (1)
- COD AGE (1)
- CSR (1)
- Calorimeter (1)
- Calorimetric test (1)
- Carbon Electrodes (1)
- Carbon Fibre Pressure Vessels (1)
- Carbon fibre (1)
- Catastrophic consequence (1)
- Cell Exchange (1)
- Centre plate (1)
- Chemical resistance (1)
- Cladding alloy (1)
- Clostridium ragsdalei (1)
- Cod-age (1)
- Coefficient of Friction (1)
- Cold (1)
- Combustion Chamber (1)
- Commodities (1)
- Comparative simulations (1)
- Competence Center (1)
- Competence center (1)
- Competence centre H2Safety@BAM (1)
- Competent authority (1)
- Component test (1)
- Composite Overwrapped Pressure Vessel (1)
- Composite Pressure (1)
- Composite material (1)
- Composite-Druckbehälter (1)
- Composite-Druckspeicher (1)
- Composites (1)
- Compressed gas (1)
- Compression Set (1)
- Computation time (1)
- Computational (1)
- Computed tomography (CT) (1)
- Computer Tomography (1)
- Concepts (1)
- Concrete (1)
- Consequence limit (1)
- Consequences (1)
- Container Safety (1)
- Container design testing procedure (1)
- Container for radioactive waste (1)
- Containers (1)
- Containment (1)
- Containment analysis (1)
- Continous monitoring (1)
- Continuous compression stress relaxation (1)
- Convection (1)
- Conveux (1)
- Correlation length (1)
- Correlation width (1)
- Corrugated fibreboard box (1)
- Corrugated fibreboard boxes (1)
- Crash simulation (1)
- Criticality safety analysis (1)
- Cross-cutting activities (1)
- Cross-cutting issues (1)
- Crygenic (1)
- Cryogenic temperatures (1)
- Current results of the DELFIN project (1)
- Cylindrical Cask (1)
- Cyro storage tanks (1)
- DELFIN (1)
- Damage (1)
- Dangerous Goods transport (1)
- Datenintregration (1)
- Defective Lithium batteries (1)
- Defective lithium batteries (1)
- Defekte Lithiumbatterien (1)
- Degree of damage (1)
- Demage (1)
- Design approval (1)
- Design assessment of RAM packages (1)
- Dichtheitsprüfung (1)
- Dichtungen (1)
- Dichtungswerkstoffe (1)
- Diesel fuel (1)
- Digital Twin (1)
- Digital quality infrastructure (1)
- Digitaler Produktpass DPP (1)
- Digitaler Zwilling (1)
- Digitalisierung (1)
- Disposal container (1)
- Distributed acoustic sensing (1)
- Distributed fibre optic sensors (1)
- Distributed strain sensing (1)
- Distribution function (1)
- Dokumentensammlung (1)
- Drop (1)
- Drop Test (1)
- Drop tests (1)
- Drop-test (1)
- Druckbehältern (1)
- Druckgasbehälter (1)
- Druckgaspackungen (1)
- Druckgefäß (1)
- Druckgeräte (1)
- Druckspeicher (1)
- Druckverformungsrest (1)
- Druckverformungsrestprüfung (1)
- Druckwelle (1)
- Dual Purpose Cask (1)
- Dual purpose cask (1)
- Dual purpose casks (1)
- Ductile Cast Iron (1)
- Ductile cast iron (1)
- Dust sensor (1)
- Dynamic Tensile Test (1)
- Dynamic impact tests (1)
- Dynamic loads (1)
- E-bike Akkus (1)
- E10 (Kraftstoff mit bis zu 10% Ethanol) (1)
- ENSA (1)
- Early-life overstress (1)
- Earthquake (1)
- Education (1)
- Eigenspannung (1)
- Elastomer (1)
- Elastomer Seals (1)
- Elastomer seal (1)
- Elastomerdichtung (1)
- Elastomere (1)
- Elastomeric seals (1)
- Elastomers (1)
- Encapsulations for damaged spent nuclear fuel (1)
- Endlager Konrad (1)
- Endlageranforderungen (1)
- Energy (1)
- Energy dissipation (1)
- Energy release (1)
- Energy saving (1)
- Experiment (1)
- Experimental approaches (1)
- Experimental testing (1)
- Explicit transient simulation (1)
- Explosion (1)
- Explosive atmosphere (1)
- Extended interim storage (1)
- FCH JU (1)
- FIBC (1)
- FIRE TESTS BAM TTS TEST FACILITIES (1)
- FKM polymer (1)
- FTIR spectra (1)
- FVK-Tanks (1)
- Failure rate (1)
- Falltest (1)
- Faseroptische Sensoren (1)
- Faserverbund (1)
- Faserverbundbehälter (1)
- Faserverbundwerkstoff (1)
- Faserverbundwerkstoffe (1)
- Feuersicherheit (1)
- Fiber optic sensing (1)
- Fiber optic sensor (1)
- Fiber-reinforced plastics (1)
- Fibre Break (1)
- Fibre Break Accumulation (1)
- Fibre break model (1)
- Fibre breaks (1)
- Fibre misalignment (1)
- Fibre optic acoustic sensing (1)
- Fibre waviness (1)
- Filled tank (1)
- Final Disposal (1)
- Final disposal (1)
- Final disposal cask (1)
- Final disposal container (1)
- Final storage (1)
- Finite Element Mesh Transition (1)
- Finite Element Simulation (1)
- Fire Qualification (1)
- Fire Test Stand (1)
- Fire Testing (1)
- Fire protection systems (1)
- Fire reference (1)
- Flammable lading (1)
- Fluorkautschuk (FKM) (1)
- Flüssigkeitsdruckprüfung (1)
- Focus area energy gases (1)
- Forces (1)
- Foresight Prozess H2 (1)
- Forschungsvorhaben (1)
- Foundation (1)
- Fracture Mechanics (1)
- Frame (1)
- Fre (1)
- Fuel assemblies (1)
- Fuel cladding integrity (1)
- Fuel rod behavior (1)
- Fuel rods (1)
- Fuel with 10 % ethanol (1)
- Fuels (1)
- GAUSSsches Wahrscheinlichkeitsnetz (1)
- GFK (1)
- GPS Scheme (1)
- GRP (1)
- GTR 13 (1)
- Gas Tomography (1)
- Gas behaviour (1)
- Gas cylinders (1)
- Gas flaring (1)
- Gasdruckprüfung (1)
- Gassensoren (1)
- Gasspeicher (1)
- Gefahrgut Transport (1)
- Gefahrgutrecht (1)
- Gefahrgutregel Transport kritische Batterien (1)
- Gefahrgutregeln (1)
- Gefahrgutregeln der BAM (1)
- General Provisions (1)
- Glass transition (1)
- Glasübergang (1)
- Graduate School (1)
- Green Deal (1)
- Großer Fallturm Horstwalde (1)
- Guide (1)
- Güter (1)
- H2 (1)
- H2-Tankstelle (1)
- H2Safety@BAM.de (1)
- H2safety (1)
- HDPE (1)
- HLW (1)
- HVO (1)
- Hazmat (1)
- Heat emission (1)
- Heating oil - biodiesel - blend (1)
- Heating oil storage tanks (1)
- Heating oil tanks (1)
- Heating oil with 10 % biodiesel (1)
- Heating oil with 10% biodiesel (1)
- Heating oil with 20% biodiesel (1)
- Heating oil-Biodiesel-Blend (1)
- Heizöl mit 10% Biodiesel (1)
- Heizöl mit 20 % Biodiesel (1)
- Heizöl mit 20% Biodiesel (B20) (1)
- Heizöl-20% Biodiesel-Blend (1)
- Heizöl-FAME-Blends (1)
- Helical spring (1)
- Heterogeneous ageing (1)
- High level waste (1)
- High-resolution absorption isotopic spectrometry (1)
- Horizon 2020 (1)
- Hoses (1)
- Hot cell (1)
- Hot cell testing (1)
- Hydraulischer Lastwechselversuch (1)
- Hydride precipitation (1)
- Hydrogen Storage (1)
- Hydrogen Strategy (1)
- Hydrogen Supply (1)
- Hydrogen market (1)
- Hydrogen refueling station (1)
- Hydrogen release (1)
- IAEA Regu-lations (1)
- IAEA Regulations (1)
- IAEA Thermal Test (1)
- IAEA fire (1)
- IAEA regulations (1)
- ICSMS (1)
- IRHD (1)
- IRHD micro hardness (1)
- ISO (1)
- ISO 16103 (1)
- ISO 3821 (1)
- IT (1)
- Image analysis (1)
- Impact Limiters (1)
- Impakt (1)
- Imperfectly mounted reinforcement cage (1)
- Independent Surveillance (1)
- Industrial leak testing (1)
- Infrastrucute (1)
- Infrastruktur (1)
- Inhaltsstoffe (1)
- Initial testing (1)
- Innendruckprüfung (1)
- Inspection (1)
- Integral Range (1)
- Interaction (1)
- Intermittent compression stress relaxation (1)
- Internal gaps (1)
- Internal shock absorber (1)
- Internationale Endlagerkonzepte (1)
- Internationale Recherche (1)
- Introduction Department 3 (1)
- Ionothermal Template Transformation (1)
- Irradiation (1)
- Isolation (1)
- KONRAD (1)
- Katalysator (1)
- Kernenergienutzung (1)
- Kerntechnische Entsorgung (1)
- Kineatic aspects (1)
- Kinematic (1)
- Kisten aus Wellpappe (1)
- Knowledge gaps (1)
- Kompetenzzentrum H2Safety@BAM (1)
- Konsequenz (1)
- Konzeptentwicklung (1)
- Korrosionsschäden (1)
- Kraftstoffe mit biogenen Anteilen (1)
- Künstliche Intelligenz (1)
- LPG (1)
- Ladungssicherung (1)
- Langsame Berstprüfung (1)
- Large scale fire testing (1)
- Large-scale fire test (1)
- Lastwechselfestigkeit (1)
- Lastwechselprüfung (1)
- Leak (1)
- Leak detection (1)
- Leakage Rate (1)
- Leakproofness (1)
- Leakproofness test (1)
- Leaktightnes (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lebensdauerversuche (1)
- Lebenslaufakte (1)
- Leckagerate (1)
- Leichtbau (1)
- Li-ion batteries (1)
- Li-ion battery (1)
- Lid temperature (1)
- Lifetime (1)
- Limit leakage rates (1)
- Literaturrecherche (1)
- Lithium Ion Cells (1)
- Lithium batteries (1)
- Lithium ion battery (1)
- Lithium isotope (1)
- Lithium-Batteries (1)
- Lithium-Ion Battery Safety and Testing (1)
- Lithium-Ionen-Batterien (1)
- Load attachment (1)
- Load cycles (1)
- Long term investigation (1)
- Long-term behaviour (1)
- Low temperature investigation (1)
- Low-cost (1)
- Lowlevel midlevel radioactive waste (1)
- Länderübersicht (1)
- Löschwasser (1)
- MID IR Spectroscopy (1)
- MNC catalyst (1)
- MRI (1)
- Machine element (1)
- Maintenance (1)
- Management (1)
- Management system (1)
- Maneuvers (1)
- Manufacturing (1)
- Manufacturing tolerances (1)
- Market Rump Up (1)
- Material properties (1)
- Material properties and compatibility (1)
- Materials (1)
- Materials compatibility (1)
- Maximum acceptable consequence (1)
- Maximum service pressure (1)
- Mchanische Sicherheitsprüfung (1)
- Mean burst pressure (1)
- Measurement methods (1)
- Mechanical and thermal behaviour (1)
- Mechanische Sicherheitsprüfung (1)
- Mechanism (1)
- Melt Flow Rate (MFR) (1)
- Metal Seals (1)
- Metal seals (1)
- Metalldichtung (1)
- Metallic seal (1)
- Metals (1)
- Methods (1)
- Metrologie (1)
- Mexico (1)
- Micro-CT (1)
- Microplastic (1)
- Mindedestberstdruck (1)
- Monte-Carlo experiment (1)
- Monte-Carlo-Simulation (1)
- Monte-Carlo-simulation (1)
- Multi-Modal Transportation Test (1)
- Multiscale modelling (1)
- NAMUR Open Architecture (1)
- NCT (1)
- NMR (1)
- NOL Ring test (1)
- NOL ring test (1)
- Natrium-Batterien (1)
- Neutronen Abschirmmaterial (1)
- New package design (1)
- Nicht zulassungspflichtig (1)
- Non-approved (1)
- Non-destructive testing (1)
- Non-sloshing (1)
- Normalverteilung (1)
- Nuclear Fuel (1)
- Numerical Simulation (1)
- Numerical approach (1)
- Numerical modelling (1)
- O-ring (1)
- OT (1)
- Oberflächenkontaminiert (1)
- Oblique testing (1)
- Observing temperatur (1)
- Ofen (1)
- Online-Monitoring (1)
- Open Source (1)
- Operational Technology (1)
- Optical backscatter reflectometry (1)
- Optical fibre (1)
- Ortsbewegliche Druckgeräte (1)
- P15y (1)
- PRV (1)
- PU-Foam (1)
- PUR (1)
- PV-product (1)
- Packages (1)
- Packaging (1)
- Partial crystalline (1)
- Particles (1)
- Passive Smart Dust (1)
- Periodic inspection (1)
- Periodic inspections (1)
- Permeation (1)
- Permeation barriers (1)
- Perturbation (1)
- Pipeline monitoring (1)
- Plastic Instability (1)
- Plate friction (1)
- Point Cloud (1)
- Policies (1)
- Polyethylene grades (1)
- Polyethylenformstoffe (1)
- Polymer 3R (1)
- Polymer in fuels (1)
- Polymere (1)
- Polymere Werkstoffe (1)
- Polymeric materials (1)
- Polymers (1)
- Polymerwerkstoffe (1)
- Polypropylene (1)
- Polyurethane Foam (1)
- Polyurethane Foam, Impact Limiters, PU-Foam (1)
- Popane storage tanks (1)
- Population (1)
- Population density (1)
- Potential effect (1)
- Pprestressed bolt connection (1)
- Pressure Vessel (1)
- Pressure bottle (1)
- Pressure recepacles (1)
- Pressure-volume product (1)
- Pressure-volume-product (1)
- Probabilistik (1)
- Probability of failure (1)
- Process and plant safety (1)
- Processes (1)
- Project QI Digital: Quo vadis Use Case H2 Refuelling Station? (1)
- Projektvorhaben (1)
- Proof test (1)
- Propagation (1)
- Propagation testing (1)
- Prototypen von Lithiumbatterie (1)
- Prüffristenfestlegung (1)
- Prüfung (1)
- Puncture test (1)
- Quality (1)
- Quality Assurance Measures (1)
- Quality Infrastructure (1)
- Quality assurance (1)
- Qualitätsinfrastruktur (1)
- Qualitätsmanagement (1)
- Qualitätssicherung (1)
- Quantitative Risikoanalyse (1)
- Quasistatic (1)
- RAM packages (1)
- RAPEX (1)
- RASEM (1)
- Racetrack specimens (1)
- Radiation (1)
- Radioactive Materials (1)
- Radioactive sources (1)
- Radioactive waste containers (1)
- Radioactve (1)
- Radioaktiv (1)
- Radioaktive (1)
- Radioaktive Materialien (1)
- Radioaktives Material (1)
- Rail damage (1)
- Rail forces (1)
- Rapid partial release (1)
- Rapid phase transition (1)
- Rate-dependent Materials (1)
- Real transport (1)
- Recycling (1)
- Recycling-Kunststoffe (1)
- Reduced Volume Method (1)
- Regelsetzung (1)
- Regelwerksentwicklung (1)
- Regularien (1)
- Reinforced concrete containers (1)
- Reliabillity (1)
- Requirements (1)
- Residual stresses (1)
- Resistance of polymers (1)
- Restberstfestigkeit (1)
- Restlebensdauer (1)
- Retention (1)
- Risiko (1)
- Risikomanagement (1)
- Risk Assessment (1)
- Risk Management Framework (1)
- Risk control (1)
- Routine conditions of transport (1)
- Rückbau (1)
- Rückbau kerntechnischer Anlagen (1)
- Rückverfolgbarkeit (1)
- SCO-III (1)
- SHPB (1)
- SNF (1)
- SNL (1)
- SSR-6 (1)
- Safe (1)
- Safe Transport (1)
- Safe handling (1)
- Safe transport (1)
- Safety Assessment (1)
- Safety goal (1)
- Salvage pressure receptacle (1)
- Sample Performance Chart (1)
- Sample performance chart (1)
- Sample preparation (1)
- Scale/shift factor and form/stretchFactor of time-temperature relation (1)
- Scatter (1)
- Schadensüberwachung (1)
- Scheme (1)
- Schutzziele (1)
- Schwingungsdynamik (1)
- Schwingungsmonitoring (1)
- Schädigung (1)
- Schüttgüter (1)
- Sea (1)
- Seal Behavior (1)
- Seal behavior (1)
- Sealing (1)
- Second Life (1)
- Securement (1)
- SensRef (1)
- Sensor network (1)
- Sensorik (1)
- Sensors (1)
- Sensors and analytics (1)
- Sequential analysis (1)
- Series production (1)
- Service life (1)
- Ship (1)
- Shore Hardness (1)
- Shore-Härte (1)
- Sicherer Umgang (1)
- Sicherheit von Wasserstofftechnologien (1)
- Sicherheitsanforderungen (1)
- Silver seal (1)
- Simulating (1)
- Simulations (1)
- Skilled workers (1)
- Sloshing affects (1)
- Slug (1)
- Smoldering (1)
- Sodium ion battery (1)
- Sodium-ion-batteries (1)
- Software (1)
- Solid-State Complexes (1)
- Sondervorschrift 674 (1)
- Special encapsulation (1)
- Spent fuel behaviour (1)
- Spent fuel characterisation (1)
- Spent fuel characterization (1)
- Spent fuel performance (1)
- Spruce wood (1)
- Stacking test (1)
- State of Safety (1)
- Statistische Auswertung (1)
- Stichprobenprüfung (1)
- Storage and transportation casks (1)
- Stowage (1)
- Stoßdämpfer (1)
- Strength degradation (1)
- Stress Wave Propagation (1)
- Stress relaxation (1)
- Streuung (1)
- Structural health monitoring (SHM) (1)
- Subway (1)
- Surveillance (1)
- Sustainability (1)
- Sustainable Route (1)
- Swept wavelength interferometry (SWI) (1)
- System Identification (1)
- Säcke (1)
- TAHYA (1)
- Tanker (1)
- Tankers (1)
- Test (1)
- Test Tailoring (1)
- Test rig (1)
- Tests (1)
- The upper consequence limit as a control instrument (1)
- Thermal expansion (1)
- Thermal package testing (1)
- Thermal properties of GFRP (1)
- Thermal radiation (1)
- Thermal remote sensing (1)
- Thermal runaway (1)
- Thermal simulation (1)
- Thermische Belastung (1)
- Thermische Belastungen (1)
- Thermische Betriebsbelastungen (1)
- Thermo-rheologically simple/complex behaviour (1)
- Thin Rod (1)
- Tiefe Temperaturen (1)
- Tiefkalt (1)
- Tightness (1)
- Tilt table (1)
- Time Effect (1)
- Time dependent effect (1)
- Time dependent loading (1)
- Time-temperature superposition (1)
- Time-temperature superposition/equivalent principle (1)
- Transfer (1)
- Transport Documents Modul (1)
- Transport Package (1)
- Transport Packages (1)
- Transport and storage cask (1)
- Transport gefährlicher Güter (1)
- Transport of dangerous goods (1)
- Transport of radaioactive materials (1)
- Transport und Lagerung von Chemikalien (1)
- Transport- und Lagerbehälter (1)
- Transportrecht (1)
- Trunnion (1)
- Trustworthy Hydrogen (1)
- Tube trailer (1)
- Turning maneuvers (1)
- Turns (1)
- Typ-III (1)
- Type A (1)
- Type A package (1)
- Type IV pressure vessel (1)
- Type IV pressure vessels (1)
- UN TDG Lithiumbatterien (1)
- UN-Kennzeichen (1)
- UN-Modellvorschriften (1)
- UV (1)
- UV-Bestrahlungsstärke (1)
- Ultraschall (1)
- Ultrasonic Guided Waves (1)
- Ultrasonic guided waves (1)
- Umformte Flaschen (1)
- Umweltsimulation (1)
- Unmodellvorschriften (1)
- Use-Case Wasserstofftankstelle (1)
- Useable resilience (1)
- VPN (1)
- Vapour (1)
- Variable friction (1)
- Vehicle-track (1)
- Vehicles (1)
- Verflüssigt (1)
- Verpackungen (1)
- Versagenstemperatur (1)
- Versuchsplattform (1)
- Vessel (1)
- Vibration analysis (1)
- Volumenbegrenzung (1)
- WAXD (1)
- Wasserdruckprüfung (1)
- Wasserstoff Café (1)
- Wasserstoffstrategie (1)
- Weibull Distribution (1)
- Weibull parameters (1)
- Weibull-Verteilung (1)
- Welding (1)
- Wheel rail forces (1)
- Wheel-track interaction (1)
- Wood fire (1)
- X-ray imaging (1)
- Zugeigenschaften (1)
- Zulassungen (1)
- Zulassungspflichtige Versandstücke (1)
- Zustimmung (1)
- ageing (1)
- battery ageing (1)
- degradation (1)
- hochradioaktive Abfälle (1)
- leakage (1)
- li-ion batteries (1)
- modulare Pipelineanlage (1)
- railways (1)
- roadways (1)
- rubber (1)
- statistische Bewertung (1)
- turning (1)
- wheel-forces (1)
- zerstörungsfreie Prüfung ZfP (1)
- Überlebenswahrscheinlichkeit (1)
Organisationseinheit der BAM
- 3 Gefahrgutumschließungen; Energiespeicher (517) (entfernen)
Non-Destructive Testing (NDT) of type 4 composite pressure vessels can be seen as key to better understanding the behaviour of the composite structure and the impact of the manufacturing process on its quality. In this presentation, NDT methods used in the “Trustworthy Hydrogen” project are introduced. A brief discussion of the observed phenomena is provided.
Hydrogen Fire Testing
(2024)
In this presentation we present a new hydrogen-based test rig for an ongoing feasibility study of using hydrogen as an energy source for the thermal testing of transport packages containing radioactive materials. The test rig will be capable of combusting hydrogen for a wide range of different burner geometries, mass flows and if necessary hydrogen blends. As this type of fire test according to the IAEA boundary conditions does not yet exist, a large number of preliminary investigations, safety assessments and calculations must be carried out in order to develop a viable concept for hydrogen fires. In the first step of the feasibility study, the temperature, structure, and radiation of various hydrogen flames are surveyed. In future works, the results will make it possible to design burner frames that are suitable for fire reference tests in order to make comparisons with pool and propane fires used in assessment procedures today. In parallel comparative numerical simulations are conducted to model the thermal behaviour of hydrogen flames using the software package Ansys®. On the one hand, the numerical simulations support the experiments by providing an overview of numerous parameters and the measuring range; on the other hand, they will help with the design of the burner frame in future work. This paper gives an overview in the design and capabilities of the test rig. Furthermore, the results of the parameter studies show that burner geometry and mass flow provide a significant design margin for the thermal shape of the hydrogen flames. In addition, the results of the initial numerical calculations will be used to determine the necessary sensors, the positions, and their operating range. Only the optimal interaction allows a controlled system that permits user-defined hydrogen fires.
Introduction and Necessity of the Investigation
The IAEA regulations for the safe transport of radioactive material (IAEA SSR-6) define the safety requirements for different package types and consider different transport conditions. The accident conditions of transport specify different mechanical and thermal tests based on investigations of real accident scenarios.
Considering the rapid development of new boundary conditions of transport such as electric mobility and the use of hydrogen as energy source for trucks and other kind of vehicles, potential effects of battery and hydrogen fires in transport accidents should be investigated. The aim is to evaluate the existing test requirements developed and derived decades ago, whether they are covering the current transport situation.
This concept paper will briefly present the reasons for detailed investigations as bases for a coordinated research project under the roof of the IAEA.
Brittle Failure Limits of Spent Fuel Claddings Subjected to Long-Term Dry Interim Storage Conditions
(2024)
The mechanical properties of spent fuel claddings can be adversely affected under the conditions of long-term dry interim storage, so that the failure limits may be reached in case of mechanical loads during handling or transport after storage. Pre-storage drying and the early stage of interim storage can expose the cladding to higher temperatures and higher tensile hoop stresses than those associated with in-reactor operation and pool storage. During slow cooling of a cladding tube under internal pressure, radial hydrides may precipitate in zirconium-based cladding alloys. This can lead to embrittlement of the material and sudden failure of the cladding integrity under mechanical stress. In order to prevent brittle failure, numerical methods are being developed to predict the mechanical behaviour and identify limiting conditions. Experimental investigations, numerical analyses and evaluation methods are discussed.
An established experimental method for characterising cladding materials is the Ring Compression Test (RCT). Some test results on irradiated cladding tubes after operation in pressure water reactors are publicly available. However, it is helpful to carry out studies on unirradiated surrogate claddings with similar material properties to reduce the effort associated with irradiated samples in hot cells and to perform material tests with a wider range of parameters. On the basis of such experimental data, load-displacement curves have been numerically analysed for a selection of cladding materials.
Radial hydrides can cause a sample to break suddenly due to fracture even at low deformation. Noticeable load drops in the RCT are caused by unstable crack propagation through the radial hydride network. The failure mechanism is quasi-cleavage in the hydrides and micro-void nucleation, growth, and coalescence in the zirconium matrix, with ductile tearing patches connecting adjacent hydrides. The cohesive zone approach was used to simulate the failure process taking into account the radial hydride morphology.
The developed method can adequately describe both the deformation and failure behaviour of irradiated as well as unirradiated claddings of zirconium-based alloys with radial hydrides under RCT conditions. Limiting conditions can be expressed in terms of fracture energy and cohesive strength.
Distributed fiber optic strain sensing for structural health monitoring of 70 MPa hydrogen vessels
(2024)
We report on the development and testing of 70 MPa hydrogen pressure
vessels with integrated fiber optic sensing fibers for automotive use. The paper deals with the condition monitoring of such composite pressure vessels (CPVs) using the optical backscatter reflectometry (OBR) applied for a distributed fiber optic strain sensing along fully integrated polyimide-coated single-mode glass optical fiber (SM-GOF). The sensing fibers were embedded into the vessel structure by wrapping them over the polymer liner during the manufacturing process of the carbon fiber reinforced polymer (CFRP). Detecting local strain events by the integrated fiber optic sensors can be an opportunity for monitoring the material degradation of CPVs under static and cyclic loading.
Hydrogen pressure vessels are among the most essential components for reliable hydrogen technology. Under current regulations, a mostly conservative strategy is employed, restricting the usage time of hydrogen pressure vessels without providing information on the real remaining lifetime. During the service life, pressure vessels are inspected periodically. However, no established method that can provide continuous monitoring or information on the remaining safe service life of the vessel. In this paper, we propose a sensor network for Structural Health Monitoring (SHM) of hydrogen pressure vessels where data from all sensors are collected and centrally evaluated. Specifically, we integrate three different SHM sensing technologies namely Guided Wave ultrasonics (GW), Acoustic Emission testing (AT), and distributed Fiber Optic Sensing (FOS). This integrated approach offers significantly more information and could therefore enable a transition from costly and time-consuming periodic inspections to more efficient and modern predictive maintenance strategies, including Artificial Intelligence (AI)-based evaluation. This does not only have a positive effect on the operational costs but enhances safety through early identification of critical conditions in the overall system in real-time. We demonstrate an experimental set-up of a lifetime test where a Type IV Composite Overwrapped Pressure Vessel (COPV) is investigated under cyclic loading instrumented with AT, FOS, and GW methods. We acquired data from the sensor network until the pressure vessel failed due to material degradation. The data collected using the three different SHM sensor technologies is planned to be evaluated individually, using data fusion, and AI. In the future, we aim to integrate the measurement setup into a hydrogen refueling station with the data stream implemented into a digital signal processing chain and a digital twin.
Structural health monitoring of hydrogen pressure vessels using distributed fiber optic sensing
(2024)
We report on distributed fiber optic sensing-based monitoring of hydrogen composite overwrapped pressure vessels (COPV) to simultaneously increase the operational lifespan and mitigate maintenance costs. Our approach represents, to the best of our knowledge, the first application of distributed fiber optic sensing for COPV Type IV monitoring, where the sensing fibers are attached to the surface, rather than integrated into the composite material. Specifically, we attach an optical fiber of 50 m to the pressure vessel's surface, covering both the cylindrical and dome sections. We note that our fiber optic sensing technique relies on swept wavelength interferometry providing strain information along the entire length of the optical fiber with high spatial resolution even at the millimeter scale. When the vessel is pressurized, the sensing optical fiber shows a linear strain response to pressure at every position along the fiber. After thousands of load cycles, the vessel finally fails with the optical fiber detecting and precisely localizing the damage in the vessel’s blind dome area. Furthermore, we discuss the potential of state-of-the-art signal processing methods and machine learning for advancing predictive maintenance. This could reduce the number of regular inspections, mitigate premature maintenance costs, and simultaneously increase the vessel’s remaining safe service life. We believe that the structural health monitoring of hydrogen pressure vessels with fiber optic sensors can enhance trust in hydrogen technology contributing to the energy transition in the future.
Packages for the transport of spent nuclear fuel are designed to endure severe accidents. To obtain approval, these transport packages must adhere to the specification-based criteria of the international transport regulations SSR-6 of the International Atomic Energy Agency (IAEA). To ensure compliance with these requirements, specific mechanical and thermal tests need to be addressed with respect to the package type. Typically, SSR-6 prescribes a mechanical test followed by a thermal fire test as part of different testing scenarios. To approve the latter test of the sequence, BAM performs calorimeter tests in advance with so-called fire reference packages for characterizing the actual fire and its impact on the package to be tested. Packages are designed with different geometry sizes depending on their purpose. For previous tests, the implemented test setups in the fire test stand were sufficiently dimensioned and could cover all requirements in this respect. However, to cover additional testing needs in the future, BAM is expanding the test setup for the purpose of testing significantly larger packages.
In previous test setups one ring burner for propane surrounding the test specimen was sufficient. The limiting size in this configuration was the design height of the transport package to be tested. According to the thermal test of the IAEA-Regulations [1], a 30-minute fully engulfing 800°C pool fire or an equally severe fire, e.g., propane gas fire, must be applied to the transport package. Possible adjustments such as nozzle cross-section and propane mass flow can be adjusted to a certain extent. Further modifications, to cover significantly higher and larger packages all-around with a fully engulfing fire, must be accomplished with an additional, second burner ring. Both burner rings had the same dimensions and were mounted on top of each other at different heights to create a significantly larger volume of fire that completely engulfs the package including its impact limiter.
To meet the IAEA regulatory boundary conditions, the enhanced fire test stand with the second burner ring is tested with a large fire reference package and will then be used for real-size transport packages after all parameters are successfully met. This fire reference package represents the external geometry of a generic transport cask for radioactive material and is equipped with numerous temperature sensors to record temperature curves at the interior wall surfaces.
eavy-weight packages for the safe transport of radioactive material are equippedwith impact limiters often built ofwood-filled steel sheet structures to fulfil the requirements of the International Atomic Energy Agency (IAEA) regulations. The requirements definemechanical tests followed by a thermal test, including criteria ensuring the package design’s ability to withstand severe accidents and provide a high level of technical safety. Impact limiters are a package component mainly designed for the packages to withstand severe mechanical accident scenarios. In drop tests the impact limiters absorb the kinetic energy during impact of the package. The package must then - with its pre-damaged impact limiters - endure a thermal test defined precisely in the IAEA regulations as a 30-min fully engulfing 800 °C-fire. After the fire, a wood-filled impact limiter may continue to release thermal energy from an ongoing combustion process, defining relevant package temperatures. The energy flow from a possible burning impact limiter to the package is important for the safety evaluation of transport packages. To investigate the combustion behaviour of densely packed layers of spruce wood, encapsulated in pre-damaged cylindrical metal enclosures, a test set-up has been realised. The set-up consists of a combustion chamber to perform these tests under defined boundary conditions. The temperature development of the test specimens will be observed fromoutside with a thermographic imager, with HD-Cameras, and the mass loss will be measured during the entire test. Airflow conditions in the combustion chamber are analysed using Computational Fluid Dynamics (CFD) calculations in OpenFOAM. The planned combustion test setup is described.
The consideration of ageing mechanisms is with integration into the IAEA-requirements now obligatory for the design of transport packages. For packages intended to be used for shipment after storage the consideration of the effects of ageing mechanisms during storage in safety analyses and the implementation of corresponding instructions for operation and maintenance are required. Therefore, these packages have been maintained during storage in a manner that all requirements specified in the IAEA-requirements and in the applicable certificates of approval have been fulfilled.
BAM is the competent authority in Germany for evaluating the thermal and mechanical design of packages for the transport of radioactive materials. In this context, BAM also evaluates the aging mechanisms and aging effects occurring during the long-term storage period of such transport packages. BAM has developed a guideline for the implementation of ageing assessment and of the measures for ageing management into the approval procedure based on IAEA-requirements.
The goal of the presented paper is to introduce this guideline and the general approach for ageing management requirements and to describe the application to a specific package design. The type and amount of the ageing management not only depend on the use of the packaging, but also on the accessibility of the components that are considered in the ageing assessment. The different operating phases of a packaging are considered for the ageing assessment, such as loading, interim storage or transport.
The implementation of measures for ageing management is divided into three levels – systemic measures, package design related measures and documentation. The systemic measures are attributed to the general management system and define the whole activities for organization of ageing management like structure, responsibilities, documentation, reports and evaluation. The package design related measures are defined in an ageing management plan. These measures shall ensure that the anticipated changes of the package design under consideration of ageing effects still complies with the design approval specification. Therefore, an ageing surveillance program and, if necessary, a gap analysis program shall be developed. The ageing management documentation ensures the continuous documentation of the compliance of a specific package to the approved package design, comprising mainly records resulting from operation and surveillance.
In 2007 the license for the German Konrad repository for low and intermediate level radioactive waste was finally confirmed. Since then, the site is improved, prepared and equipped for the currently planned start of waste package emplacement in 2029. Bundesanstalt fuer Materialforschung und -pruefung is regularly contracted by the Bundesgesellschaft für Endlagerung as the responsible authority for waste product control, waste container design testing, and waste package acceptance. In this context BAM is mainly responsible for design testing of various container types including the evaluation of quality assurance measures for container manufacturing.
In addition to general requirements concerning container design, the casks have to withstand specific mechanical load scenarios. Drop tests from different heights under consideration of the most damaging drop orientation and a stacking test are two examples for necessary safety demonstrations.
If the containers are made from concrete the reinforcement has the function to absorb tensile forces the concrete is not able to withstand by its own. Because of manufacturing imperfections of cylindrical concrete containers manufactured already decades ago, the reinforcement cages are not always exactly, asymmetrically positioned when they were poured. This inspired BAM to perform various ABAQUS® finite-element (FE) simulations by using the example of a simplified cylindrical container design with generic dimensions. On the basis of the calculated tensile and compressive stress distributions suggestions are derived on how a cylindrical concrete container with an imperfectly placed reinforcement cage has to be oriented for a drop or stacking test to ensure the most damaging test scenario.
Dem AVK-Arbeitskreis Wasserstoff-Drucktanks werden ausgehend von Zielen und Aufgaben der BAM sowie der Fachkompetenz auf dem Gebiet der Sicherheit von Composite-Druckbehältern über die prüftechnische Ausstattung, die angewendeten und weiterentwickelten Prüf- und Untersuchungsmethoden sowie zu Beispielen von Forschungsvorhaben wie DELFIN, COLIBRI und SH2APED berichtet.
Acceptable limits for activity release from transport casks for high-level radioactive material specified in the IAEA regulations must be kept by the integrity of cask body and the cask sealing system. BAM as the German competent authority for mechanical, thermal and containment assessment of packages liable for approval verifies the activity release compliance with the regulatory limits. The specification of conservative package design leakage rates is one of the most important aspects in assessment.
Metal seals of the Helicoflex® Type are usually used to ensure the required package tightness for both, storage, and transport of the cask before and after storage. Due to the long-term use the seal behavior is influenced by temperature and time. The mechanical and thermal loadings associated with the routine, normal and accident conditions of transport specified in the regulations can have a significant effect on the leak tightness of the sealing system. Whereas the safety for application of new, non- aged Helicoflex® seals is verified sufficiently, there are still technical data gaps concerning the efficiency of aged Helicoflex® seals.
BAM performed experiments to learn more about the sealing efficiency of aged Helicoflex® seals with Aluminum and Silver outer jackets. The seals were compressed in test-flanges and for artificial ageing the complete flange systems were stored in an oven for several month at a high temperature. After this ageing procedure the flanges were opened completely, the seals were moved a little to vary the contact area, and the flanges were compressed again. During the compression and decompression tests after the aging, load-deformation characteristics of the seals, and leakage rates were measured.
With these tests a load situation was simulated, which can occur in the regulatory drop test of the cask: Under high impact loads the bolted lid can lift a little for a short moment, allowing a little movement of the seal, so that the contact area can change before compressing again.
Details about test conditions and first results will be presented in the poster.
Packages for the transport of radioactive material are designed to en-dure severe accidents. Packages for the transportation of radioactive material must demonstrate that the package can withstand certain prescribed tests from the IAEA Regulations [1]. In addition to mechanical tests, a thermal test in form of a fire test must be carried out. As packages to be tested at BAM are signifi-cantly larger than previous package designs, BAM has expanded an existing fire test stand. A modular concept is chosen, which means that the arrangement of the burner nozzles can be adapted to the test specimen. The dimensions of the burner rings, the type, the orientation and the number of burner nozzles can be varied depending on the test specimen. In addition, various pumps can be used to set the corresponding mass flow. With the help of a calorimeter test, the fire test stand can be qualified for a specific size of packages regarding the boundary conditions of the IAEA Regulations [1]. Due to the typically wood filled impact limiters in German package designs, a fire test is necessary, as experiments have shown that possible openings that occurred during a mechanical test contributed to the igni-tion of the wood filled impact limiters within the prescribed 30 minutes of the IAEA Regulations [1]. From a series of experiments, two experiments are pre-sented to show the possibilities to obtain different temperatures and temperature rates in the test specimen. In addition to sensor data, the heat flux into the package is calculated to verify that the IAEA boundary conditions are satisfied. In addition to the temperature data, other data such as wind speed and wind direction are also recorded to explain subsequent effects in the measurement data in a comprehen-sible manner.
Germany had been transporting spent fuel to the reprocessing plant in Sellafield and La Hague for decades until around 2005. Resulting from the obligation to take back the vitrified high-level waste from reprocessing six CASTOR® HAW28M filled with 168 canisters with radioactive waste in vitrified form were transported from Sellafield to the interim storage facility Biblis in 2020. Rail wagons were used for the transport to the port in Barrow-in-Furness, where they were loaded into a dedicated seagoing vessel, certified as INF Class 3 according to the INF Code. This was the first time that vitrified high level waste with considerable heat load was transported under a German design approval certificate.
BAM was involved in the authority assessment of the conditions for the sea transport. For the first transport BAM required among others, assessment of temperature distribution during transport, logging of temperatures of cargo bays and graphical imaging of temperatures of the bay with the cask in order to ensure compliance with temperature specifications, e.g. maximal neutron absorber and gasket temperatures. Special interest was taken in the identification of possible events exceeding the specified temperatures considering the different philosophies of IMDG code and its supplement INF code regarding temperature control of hatches. Results show compliance with assumed conditions.
Im Rahmen der von der BAM und anderen Partnern ins Leben gerufenen Initiative „Digitale Qualitätsinfrastruktur“ liegt der Fokus u.a. auf der Entwicklung von neuen Zertifizierungsworkflows. Dabei ist eine besondere Bedeutung dem Zusammenführen von Operational Technology (OT) und Informationstechnik (IT) beizumessen. Zur Datenintegration aus der Sensor-Feldebene einer Versuchs-wasserstofftankstelle wurde eine solche Infrastruktur zunächst in einer Laborumgebung aufgebaut.
The ongoing geo-political conflicts and the increasing need for the implementation of measures to improve the energetic system sustainability are increasing the importance of tanks for storing cryogenic fluids in the energy industry. The most common example of cryogenic tank applications is the transport of natural gas and hydrogen in their liquid form (LNG and LH2 respectively) for which, considering the same transport volume cryogenic storage ensures significantly higher transport capacities with respect storage based solely on overpressure.
A common feature of all cryogenic transported fluids is that their condition must be maintained minimizing heat leaks from the environment as much as possible. This is achieved by the implementation of thermal super Insulations (TSI) systems based on e. g. rock wool, perlites, microspheres, multilayer insulations (MLI), and vacuum which have proven to be effective in applications. However, due to the relatively short period of use in some applications, the small number of documented incidents, and the still few investigations carried out in the field, the exploitation of such systems in the cryogenic fluids transport sector still suffers from insufficient knowledge about the course and consequences of incidents. Accidents involving collisions, fires, and their combination are quite common in the transportation sector and may generate extraordinary loads on the tank and its insulation system, eventually leading to tank failure.
The present study focuses on the behavior of TSI systems in tanks when it is exposed to an external heat source representative of a hydrocarbon fire scenario. This may cause an increase of the heat flux into a tank by several orders of magnitude with respect to normal design conditions, thus inducing severe and in the TSI, causing the rapid release of flammable gas and even resulting in a Boiling Liquide Expanding Vapour Explosion (BLEVE).
To study such scenarios a test rig was developed at BAM that allows testing of TSI at industrial conditions and enables subsequent analysis of TSI samples. This test rig considers the typical double-walled design of tanks for cryogenic fluids with vacuum and an additional insulating material in the interspace. Adjustable electrical heating elements simulate the fire on one side of the double wall. This process allows the implementation of repeatable heat loads of up to 100 kW/m². The other side of the double wall is represented by a fluid-supported heat exchanger, which allows the simulation of cold or cryogenic conditions in the test rig, and to determine the heat flux transmitted through the double wall. Thus, the test rig allows thermal loading and performance analysis of TSI samples at the same time.
In the presentation, the results of diverse tested TSI systems will be presented and discussed. As a result of this study, the list of advantages and disadvantages for the choice of tested TSI expands. Within the test, all samples degraded as a consequence of a hydrocarbon fire-orientated thermal load. Strong differences in the behavior of the tested TSI systems over temperature, location, and time were observed. Additionally, the tested MLI insulations were significantly more resistant to their base materials. These results are relevant for the design, the definition of national and international regulations, the Risk assessment, and the development of safety concepts for cryogenic tanks.
In this lecture, the safety assessment of hydrogen gas storage systems is presented using the example of composite pressure vessels. The main element is a probabilistic approval approach based on five steps. Firstly, the testing and evaluation of properties at the beginning of life are shown. Secondly, methods for artificial aging and the effect on the residual strength are presented. Thirdly, testing against dedicated accidents is introduced. Fourthly, effects on the surveillance of production quality are discussed. Finally, degradation and the end of life are estimated. Background information and examples are given for each step. The assessment presented is a method applicable for many safety-related systems.
In this lecture, the safety assessment of hydrogen gas storage systems is presented using the example of composite pressure vessels. The main element is a probabilistic approval approach based on five steps. Firstly, the testing and evaluation of properties at the beginning of life are shown. Secondly, methods for artificial aging and the effect on the residual strength are presented. Thirdly, testing against dedicated accidents is introduced. Fourthly, effects on the surveillance of production quality are discussed. Finally, degradation and the end of life are estimated. Background information and examples are given for each step. The assessment presented is a method applicable for many safety-related systems.
In this lecture, the safety assessment of hydrogen gas storage systems is presented using the example of composite pressure vessels. The main element is a probabilistic approval approach based on five steps. Firstly, the testing and evaluation of properties at the beginning of life are shown. Secondly, methods for artificial aging and the effect on the residual strength are presented. Thirdly, testing against dedicated accidents is introduced. Fourthly, effects on the surveillance of production quality are discussed. Finally, degradation and the end of life are estimated. Background information and examples are given for each step. The assessment presented is a method applicable for many safety-related systems.
In this lecture, the safety assessment of hydrogen gas storage systems is presented using the example of composite pressure vessels. The main element is a probabilistic approval approach based on five steps. Firstly, the testing and evaluation of properties at the beginning of life are shown. Secondly, methods for artificial aging and the effect on the residual strength are presented. Thirdly, testing against dedicated accidents is introduced. Fourthly, effects on the surveillance of production quality are discussed. Finally, degradation and the end of life are estimated. Background information and examples are given for each step. The assessment presented is a method applicable for many safety-related systems.
In this presentation safety aspects of hydrogen transportation are discussed. At first, the regulatory background and level of safety are presented. In the second part, the modelling of consequence due to sudden rupture of pressure receptacles is explained. Finally, the results are used to define a limit for consequence to enable an acceptable and safe transport of hydrogen.
Die Umweltwirkungen auf ein Material werden als Überlapp der Funktionskurven von Materialempfindlichkeit und einwirkenden Umweltparametern betrachtet. Wenn entweder die Empfindlichkeit oder die Beanspruchungen Null sind, ergibt sich auch keine Umweltwirkung und bei beidseitig Werten größer Null das jeweilige Produkt der beiden. Die Akkumulation der nicht-reversiblen Effekte über die Zeit und allen Eigenschaftsänderungen entspricht der Alterung des Materials für den jeweiligen Expositionszeitraum.
Die digitale Umweltsimulation gliedert sich hier in drei Teilaspekte. Ein erster, rein materialwissenschaftlicher Teil hat die Aufgabe, alle relevanten Materialempfindlichkeiten experimentell zu quantifizieren. Ein zweiter – unter Umständen numerischer Teil – hat die Aufgabe, das Bauteil und seine Einbaulage zu digitalisieren und aus den makroskopischen Umgebungsbedingungen die relevanten mikroklimatischen Umweltparameter für alle Oberflächen- oder Volumenelemente zu bestimmen. In einem dritten Teil werden die Einwirkungen über den betrachteten Zeitraum berechnet und kumuliert. Dieses Konzept, das auf den so genannten Expositions-Reaktions-Funktionen (ERF) basiert, wird an Beispielen der Photoxidation erläutert. Dieses Vorgehen wurde schon beim ViPQuali-Projekt als Numerische Umweltsimulation umgesetzt.
Überprüft werden muss das Modell unbedingt an einer realitätsnahen Validierungsbeanspruchung. Hier werden die ermittelten ERFs mit über den kompletten Beanspruchungszeitraum geloggten Umweltparametern gekoppelt, um die berechnete mit der experimentell erfahrenen Alterungswirkung zu vergleichen. Nur so kann sichergestellt sein, dass alle für die Anwendungsumgebung relevanten Materialempfindlichkeiten einbezogen wurden.
Evaluation of Heat Fluxes in Fire Reference Test Conducted in BAM Propane Gas Fire Test Facility
(2024)
Packages for the transport of intermediate- and high-level radioactive waste are designed to withstand severe accidents. The International Atomic Energy Agency (IAEA) has established specific mechanical and thermal tests. Packages for the transport of radioactive material must withstand these tests to comply with the Regulations for the Safe Transport of Radioactive Materials IAEA [IAEA (2018)]. A fire reference package was developed with the primary objective to demonstrate that the fire meets the regulatory requirements. Another aim is to characterise the boundary conditions of the actual fire as input parameters for thermo-mechanical simulations. A simple method to characterise the boundary conditions of a real steady state fire with a fire reference package is presented. The thermal test mainly consists of a 30 minute fully engulfing 800°C pool fire or an equally severe fire, such as a propane gas fire. The fire reference tests are performed prior to the actual fire test with the real package. The heat fluxes into the package depend substantially on the fire characteristics and the surface temperature of the package. To investigate local and overall heat fluxes over a wide range of surface temperatures in this test facility a fire reference package was designed for repeated use. The fire reference package presented in this paper represents the outer geometry of a small transport container for radioactive material and is used as a device in civil engineering. It is designed as a closed steel sheet cylinder with a wall thickness of 10 mm, a length of 182 mm and a diameter of 102 mm. The package was instrumented with thermocouples and filled with heat resistant insulation material. Open-air fire tests were performed in a BAM propane gas fire test facility with the fire reference package. The measured temperatures are used to determine the changes of heat fluxes into the fire reference package in relation to the package surface temperature. The calculated heat fluxes allow its fitting to express the thermal exposure as simple mathematical boundary condition. Therefore, in a first approach, fire properties such as adiabatic surface temperature (AST) as proposed by Wickström et al. (2007), convection coefficient and emissivity are determined mathematically fitting the heat flux development presented in this paper. The evaluated results provide an initial picture of local fire characteristics of the conducted propane gas fire and are a further development of previous works from Feldkamp et al. (2020). The results can be used in thermal and thermo-mechanical models to simulate the load on the real transport package in fire. The test shows that the examined propane gas fire covers the IAEA-fire over a wide range of surface temperatures with the chosen test stand parameters.
Biofuels, particularly biodiesel, have gained significant attention as an alternative to traditional fossil fuels in recent years. Unlike diesel, which contains hundreds of compounds, biodiesel only contains a few compounds in the C16-C18 carbon chain. However, the use of biodiesel in automobile and transportation applications can result in problems of degradation or even damage in materials. Among the commonly used polymer materials, fluorocarbon (FKM) shows excellent performance and high stability and compatibility towards oil, diesel, ethanol, and other chemicals. FKM is a family of fluorocarbon-based fluoroelastomer materials, which provide excellent high-temperature and chemical stability compared to other elastomers. As a result, FKM is widely used in chemical processes such as petroleum refining, where it is used for sealings, pumps, and other components.
Der Wasserstofftransport auf der Straße ist wichtig und wird wie der noch geringe Transport auf der Schiene weiter stark zunehmen. Die bisherige Effizienzsteigerungen sind über Werkstoff- und Designänderungen vom Vollstahl über umfangsumwickelte Stahl- bis zu Compositespeichern mit Kunststofflinern erfolgt.
Hinzu kam die auf Basis der BAM-GGR 022 an Vorbedingungen geknüpfte Prüffristverlängerung von 5 auf 10 Jahre. Die wiederkehrende Prüfung von großen Transporteinheiten bedeutet jedes Mal einen Stillstand von gut 8 Wochen. Entsprechend steht mit Blick auf die weitere Effizienzsteigerung die Reduktion des Prüfaufwands im Fokus.
Eine Effizienzsteigerung kann nach aktueller Rechtslage geschehen, indem die hydraulische Prüfung auf eine Gasdruckprüfung umgestellt wird. Dies könnte zukünftig mit geeigneten Arbeitsschutzmaßnahmen pneumatisch durchgeführt werden – auch ohne Rechtsänderung.
Ein deutlich größerer Schritt in Richtung Verbesserung des Aufwands- zu Nutzenverhältnis ließe sich erreichen, indem die zerstörungsfreie Prüfung nicht mehr nur als Arbeitsschutz-motiviertes, begleitendes, sondern als zentrales Prüfverfahren ausgebaut wird. Gerade wenn – wie für die Schallemissionsanalyse erwartet – eine relativ gute Abschätzung des Berstdruckes möglich ist, könnte auf die 100%-Prüfung verzichtet werden und bis zu einem kritischen Alter nur auf Stichprobenprüfung basieren, was allerdings erhebliche Rechtsänderung erfordert und auch neue Werkezuge der Informationsverwaltung.
Als Vorlage für einen praktischen Ansatz zur Rechtsänderungen inkl. Informationsverwaltung wird auf die SV 674 in Verbindung mit 6.2.3.5.3ff ADR/RID verwiesen. Dies kombiniert mit einer digitalen Lebenslaufakte, die auf der digitalen Qualitätssicherung (QI-digital) beruht, wäre ein mächtiges Werkzeug für eine Verbesserung des Aufwands- zu Nutzenverhältnis und so auch eine Lösung des mit der stark steigenden Anzahl der Transporteinheiten absehbaren Kapazitätsproblems in der wiederkehrenden Prüfung.
The subject of permeation of hoses according to ISO 3821 for
hydrogen was discussed for a long time in ISO/TC 44/SC 8. The reason
is a considerable leakage of hydrogen diffused into the hose material
over the end face of the hose. Because of this unsolved, safety-related
problem of hoses sold on the market, measurements should be carried
out in order to be able to better assess the problem. BAM has declared
its attendance to provide a required fast solution to this issue.
H2Safety@BAM
(2023)
BAM is part of the “Quality Infrastructure Digital” (QI Digital) initiative of the German Federal Ministry for Economic Affairs and Climate Action (BMWK). This initiative aims at coordinating a large cooperation project, “QI Digital” for making German and European quality management systems fit for the digital transformation. It is a fact that the digitization of new products and services is occurring much faster than quality management systems can be accordingly updated. Thus, the digital transformation of quality management is necessary to preserve the competitiveness of the German and European industries that stand for quality and safety in the global market. The Use Case “Reliable Hydrogen Refueling Station” of QI Digital aims at creating new solutions that are transferable to other technical systems and at further developing standards and technical rules as a contribution to technology transfer and innovation.
This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, REPowerEU Plan, Renewable Energy Directive and its Delegated Act, Net Zero Industry Act, etc.
This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture.
This lecture describes the history of hydrogen from the first scientific discoveries in the 18th century to the current technological and political developments for the market ramp-up of hydrogen technologies. The European policy framework for safe hydrogen technologies is explained comprehending the European Green Deal, European Climate Law, European Hydrogen Strategy, Clean Hydrogen Partnership, etc. Safety in hydrogen technologies is governed by international and European regulations and standards. An overview on regulatory bodies, technical committees, regulations, directives, standards, and technical guidelines with special attention on the BAM-GGR 021 is given in this lecture.
Lithium-ion batteries usually consist of numerous individual cells. There is ongoing discussion about enhancing sustainability by considering the replacement of heavily aged or damaged cells. Nevertheless, the planned replacement of individual cells poses significant challenges in ensuring the required reliability and safety of the refurbished device.
Due to their increasing energy density, lithium-ion-batteries (LIBs) play a key role in the traffic energy transition. Regarding their safety behavior, the main challenge of LIB-cells remains the thermal runaway (TR) process. In situ/operando investigations of the TR on commercial cells is possible with radiographic and computer tomographic measurements. Nonetheless, high resolution visualization of the TR persists as a challenge due to the high progression speed of the TR-process itself. Generally, performing abuse tests at cryogenic temperatures allows to slow down or even prevent the TR. Nevertheless, not all abuse methods are suitable for TR investigations at low temperatures. Nail penetration is an appropriate option, however, contains numerous unknown parameters and therefore suffers regarding reproducibility.
Herein, a self-developed high precision nail-penetration-setup is introduced, approaching the necessary mechanically reproducibility with controlled temperatures down to -190°C. The setup allows the preparation of critically abused, however, at cryogenic temperatures stable LIB-cells. These cells were controlled rethermalized to room temperature during synchrotron x-ray computer tomography (SXCT) with a pixel size up to 0.7 μm. During this measurement, the temperature and voltage of the cell is monitored allowing the visualization of the initial internal cell reactions. This study reveals the relation between internal reactions and cell voltage. Finally, the developed set-up enables in-depth analysis of thermal runaway behavior down to material level for various commercial battery cells in the future.
Next to performance features, safety aspects of lithium-ion batteries (LIBs) are a crucial research field. The abuse/misuse of a LIB can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR). Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a TR-propagation. Due to the risk of a TR, special measures need to be applied while handling, storing, and transporting batteries. According to current transport regulations, all different types of lithium-ion and lithium metal cells/batteries (by means of cell format, cathode chemistry, etc.) require the same transport conditions regardless of the intensity of their reaction during abuse tests. To allow more differentiated transport requirements, the United Nations (UN) Subcommittee Transport of Dangerous Goods created an Informal Working Group (IWG) on the topic of a hazard-based classification of LIBs. BAM is one of nine laboratories working on the development of a respective classification scheme including appendant test protocols.
Herein, we discuss the latest results of our safety tests on commercial LIB-cells employing the test protocols developed in the UN-IWG. Single cell tests are analysed regarding different hazardous features during the TR, e.g., cell temperature, flame occurrence, and gas amount. Next to the general occurrence of a propagation, the propagation speed is analysed by propagation tests. In total, the presented results are gathered from over 200 tests. Next to the classification of the tested cells, the data set obtained is analysed in respect to the cells’ key features, such as cell energy, state of charge and cathode type. Generally, the presented results can increase the overall understanding of the TR-mechanism supporting the design of advanced safety measures on cell level in the future.
Lithium-ion batteries (LIBs) are essential for the electrification of vehicles and play an important role for stationary storage units needed for grid-balancing. Research groups all over the world work on the improvement of LIBs regarding an increase in energy density as well as cycle-life and a decrease in costs. Next to these research topics, a continuously uprising and crucial field is safety features of LIBs, which can be implemented at different levels, such as material, cell, battery and system level.
The abuse/misuse of a LIB can cause an internal release of heat which can trigger a chain of exothermic reactions on cell level. Hence, the cell temperature increases dramatically, causing the so-called thermal runaway (TR), possibly leading to flames and/or explosion of the cell. Moreover, the TR of one cell can initiate the TR of adjacent cells leading to a so-called propagation, possibly, causing the TR of the whole battery. Ideally, easily obtainable key features of a certain cell – such as cathode type, cell format, cell energy and state of charge (SOC) - could allow the prediction of its behaviour under abuse conditions. In the present study, we will discuss the latest result of our safety tests on cell level employing an external heater as TR-trigger. Single cell tests will be analysed regarding different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, gas amount and gas composition. Moreover, the possibility of a TR-propagation and the respective propagation speed will be gained from propagation tests utilizing six cells with identical SOC. In total, the study comprises over 200 tests on cell level. The gained data set is analysed in respect to the cell parameters, such as cell format, cell energy, SOC and the cathode type as well as the atmosphere (air vs. N2) present during the test. A special focus is put on the discussion of general conclusions linking cell parameters to TR-effects and propagation behaviour.
The findings regarding common conclusions between key features and TR-effects can enable a rather facile selection process of cells/batteries for certain applications according to specific safety targets. Moreover, it allows to choose cell-specific safety measures, suitable during operation. In further works, the study will be extended to end-of-first life cells yielding important conclusions regarding crucial safety aspects for the implementation of those cells in 2nd-life application. Generally, the presented results can increase the overall understanding of the TR mechanism supporting the design of advanced measures to enhance the safety on cell level in the future.
Lithium-ion battery (LIB) powered devices, such as laptops, mobile phones and power tools are ubiquitous in our daily lives. Moreover, LIBs are essential for the electrification of vehicles, and play an important role for stationary storage units needed for grid-balancing. The improvement of LIBs, in terms of increasing energy density as well as cycle-life and decreasing costs, is tackled by numerous research groups all over the world. In the last years, research regarding safety aspects has steadily gained more interest. The safety of LIBs can be implemented at different levels, such as material, cell, battery and system level.
The abuse/misuse of an LIB can lead to an internal increase in heat which can trigger a chain of exothermic reactions on cell level. Thus, the cell temperature increases dramatically causing the so-called thermal runaway (TR). This process can lead to flames and/or explosion of the cell. Furthermore, the TR of one cell can initiate the TR of adjacent cells causing the so-called propagation, possibly, leading to the TR of the whole battery.
Herein, we will show the latest result of our safety tests on cell level employing an external heater as TR-trigger. Regarding single cell tests, we will compare different hazardous features during the TR, e.g., cell temperature, occurrence of flames, peak pressure, and toxic gases, depending on the cell format, cell energy and the cathode type. The same cell parameters will be used to discuss the results of the propagation tests. Moreover, the influence of the state of charge (SOC) and the present atmosphere (air vs. N2) as well as the repeatability will be discussed. Overall, the study comprises over 180 tests on cell level.
The findings regarding the TR behaviour can be used to create a hazard-classification scheme of LIBs, e.g., allowing the definition of (cell type specific) conditions for a safe transport. Furthermore, the results can increase the general understanding of the TR mechanism promoting the development of advanced measures to enhance the safety on cell level in the future.
Deconvoluting the impact of early-life abuse conditions on the degradation of lithium-ion cells
(2023)
The successful repurposing of degraded lithium-ion (Li-ion) batteries in second-life applications is a vital step towards achieving a circular economy. While reusing aged Li-cells is a promising way of mitigating their overall environmental footprint, it is crucial to anticipate their future safety and performance characteristics . Unfortunately, predicting these properties is a cumbersome task, essentially caused by limited knowledge of the interference of different degradation modes in the cells’ first life.
To still enable estimating of these parameters from a current state, the present study systematically investigates the impacts of abusive conditions in an early phase of the cells’ life on their subsequent degradation behavior. For this purpose, individual Li-cells are initially stressed by different measures such as overcharging, deep-discharging, plating, and deliberate combinations of the aforementioned methods. Electrochemical performance indicators are monitored during subsequent cycling of the cells which provides insights into the interdependencies of different degradation modes induced by specific stress conditions. In this manner, it is clarified whether or not the total degradation can be determined by a convolution or a superposition of individual deterioration effects and, thus, be described as a multidimensional state function.
This knowledge will finally contribute to a better understanding of the performance and safety behavior of degraded Li-ion batteries which can help to successfully implement them into second-life applications.
Understanding the safety characteristics of aged Lithiumion
(Li-ion) batteries is essential for their effective
integration into second-life applications. The SafeLiBatt
project is a research initiative focused on evaluating
safety-related parameters of these batteries.
The presented study elucidates the impact of a cells’
state of health (SOH) on its safety behavior. Four highpower
pouch cells (Li-NMC622) were exposed to elevated
temperatures to achieve accelerated ageing. Subsequent
thermal abuse tests were utilized to assess crucial
parameters related to the thermal runaway (TR).
When compared to their non-aged (begin of life, BOL)
analogs, the aged cells implicated a TR-onset lowered by
about 10 – 20 K.