Physisches Exemplar in der Bibliothek der BAM vorhanden ("Hardcopy Access")
Filtern
Erscheinungsjahr
- 2008 (6) (entfernen)
Dokumenttyp
Referierte Publikation
- nein (6)
Schlagworte
- Drop tests (2)
- Impact limiter (2)
- Radioactive (2)
- Transport (2)
- Aging (1)
- BAM test centre technical safety (1)
- CASTOR casks (1)
- Cask (1)
- Containment (1)
- Drop testing (1)
Test installations for the examination of CASTOR casks at the BAM test centre technical safety
(2008)
BAM as competent German government institute for the mechanical and thermal testing of radioactive material transport and storage containers, operates unique drop and fire test facilities for experimental investigations on an open-air Test Centre Technical Safety.
To be able to perform even drop tests with full-scale spent fuel or HAW casks (i. e. the German CASTOR cask designs; CASTOR in the meantime in synonym for all other spent fuel cask designs) BAM constructed in 2004 a large drop test facility capable to handle 200 tons test objects, and to drop them onto a steel plate covered unyielding target with a mass of nearly 2600 tons. Drop testing of the 181 ton CONSTOR V/TC, the 127 ton MHI-MSF 69BG, a 1:2 scale model (CASTOR HAW TB2) and of cubic containers for radioactive waste disposal will briefly be presented. The experimental BAM drop testing activities can be supported also by drop testing of smaller packages (up to 2 tons) in an in-house test facility, and by dynamic, guided impact testing inside a new drop test machine. In May 2008 a new modern fire test facility was put into operation. The facility provides two test stands fired with liquid Propane. Testing in every case has to be completed by calculational investigations where BAM operates appropriate computer codes, e. g. ABAQUS, LS-Dyna, ANSYS and other analytical tools.
Safety during whole life time: important aspect in safety assessment of sealed radioactive sources
(2008)
Many sealed sources with long halflife isotopes commonly used in industry or medicine have a long working life, up to several decades. Source integrity must be guaranteed in transport and use at any time. On the one hand, safety during the working life has to be ensured by the source design. Its strain has to be tested. On the other hand, source durability depends on the specific operating conditions. BAM as the competent authority in Germany has to assess the suitability of a source design for safe transport and use also for a longer service life for: (a) sources approved as special form radioactive material according to the regulations for the safe transport of radioactive material, (b) sources in approved devices for licence free use according to the Radiation Protection Ordinance, Para 25, and (c) sources with an extended leak test period according to Radiation Protection Ordinance, Para 66. In all these domains BAM has to assess if design and additional arrangements are qualified and guaranteed to prevent a release of radioactive content under the mechanical, chemical and physical operating conditions of the specified working life of a sealed radioactive source. As a result, limits for the duration of validity of the special form status of a source or a type approval of a device are specified and, in many cases, special additional responsibilities for users, such as periodical control and test measurements, have to be specified in approval certificates as binding conditions to satisfy the required safety standards in regulations. This paper presents BAM's experiences and shows which aspects should be considered in assessment of a lifetime limit of sealed sources.