Datei im Netzwerk der BAM verfügbar ("Closed Access")
Filtern
Dokumenttyp
- Vortrag (13)
- Beitrag zu einem Tagungsband (6)
- Zeitschriftenartikel (4)
- Posterpräsentation (2)
Schlagworte
- Impact (25) (entfernen)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (13)
- 7 Bauwerkssicherheit (9)
- 7.2 Ingenieurbau (9)
- 3 Gefahrgutumschließungen; Energiespeicher (6)
- 3.5 Sicherheit von Gasspeichern (6)
- 8.0 Abteilungsleitung und andere (6)
- 3.3 Sicherheit von Transportbehältern (4)
- 8.5 Röntgenbildgebung (4)
- 8.1 Sensorik, mess- und prüftechnische Verfahren (3)
Eingeladener Vortrag
- nein (13)
Reinforced concrete is a widely used material for power generation structures, where load scenarios like impact loadings need to be considered. In this context mechanical splicing systems for the connection of reinforcement bars are of specific interest and impact resistance for the splicing systems has to be verified. High speed tensile tests need to be performed on splicing systems for reinforcement bars to confirm the capability of the coupler to resist impact loading. Furthermore, the ability of the reinforcement steel to dissipate energy by ductile behaviour with pronounced plastic strains should be confirmed by these tests. During the last decades comprehensive experiences were developed at BAM performing high speed tensile tests on reinforcement bars as well as on several splicing systems. For the lack of available standards defining these tests in detail an appropriate test procedure was developed and continuously optimized during this period at BAM. The test procedure is partially based on testing principles adapted from available standards. The main intention behind this test procedure is to perform high-speed tensile tests with a specific constant strain rate generated at the specimen. Furthermore, main objective was to establish a procedure to guarantee the comparability of test results for different diameter of reinforcement as well as for different types of couplers. Besides the pure execution of the high-speed tensile tests, the test specification also declares how to evaluate the measurements and the test results. Finally, some typical results will be presented in this contribution.
As a contribution to the national hydrogen strategy, 3.5 years ago, the Delfin research project started with the aim of developing a cost- and material-optimized hydrogen tank design for automotive application. Under the patronage of the National Organization Hydrogen and Fuel Cell Technology (NOW), a consortium consisting of 9 research institutes, component suppliers, engineering service providers and automobile OEMs is processing a wide range of work packages. The focus of BAM research sets on impact testing and safety-related characterization of pressure vessels of different development stages. Furthermore, the implementation of nondestructive testing methods is applied. The presentation shows an overview of the BAM work packages and an extraction of the results generated so far.
As a contribution to the national hydrogen strategy, 3.5 years ago, the Delfin research project started with the aim of developing a cost- and material-optimized hydrogen tank design for automotive application. Under the patronage of the National Organization Hydrogen and Fuel Cell Technology (NOW), a consortium consisting of 9 research institutes, component suppliers, engineering service providers and automobile OEMs is processing a wide range of work packages. The focus of BAM research sets on impact testing and safety-related characterization of pressure vessels of different development stages. Furthermore, the implementation of nondestructive testing methods is applied. The presentation shows an overview of the BAM work packages and an extraction of the results generated so far.
Hochbeanspruchte Bauteile wie Druckbehälter bergen im Falle eines Versagens ein erhebliches Gefährdungspotential für Mensch und Umgebung. Trotz der Auslegung mit hohen Sicherheitsfaktoren kommt es durch die hauptsächlich bei mobilen Anwendungen eingesetzten Leichtbauwerkstoffe und Materialkombinationen zu komplexen Degradations- und Schädigungsvorgängen, welche unter ungünstigen Umständen zu einem frühzeitigen Versagen führen können. Die hier vorgestellten Untersuchungen beziehen sich auf Typ IV-Gasspeicher, die als Wasserstofftanks in KFZ zur Anwendung kommen. Durch den Einsatz eines Messverfahrens auf Basis einer experimentellen Modalanalyse (EMA) sollen Schädigungs- und Degradationsgrad künftig zerstörungsfrei erfasst und auch einsatzbegleitend überwacht werden können.
Hochbeanspruchte Bauteile wie Druckbehälter bergen im Falle eines Versagens ein erhebliches Gefährdungspotential für Mensch und Umgebung. Trotz der Auslegung mit hohen Sicherheitsfaktoren kommt es durch die hauptsächlich bei mobilen Anwendungen eingesetzten Leichtbauwerkstoffe und Materialkombinationen zu komplexen Degradationsvorgängen, welche unter ungünstigen Umständen zu einem frühzeitigen Versagen führen können. Am Beispiel eines hybriden Typ III-Behälters, bestehend aus Metall und Faser-Verbund-Kunststoffen, wird demonstriert, wie sich Änderungen des lebensdauerbestimmenden Eigenspannungszustandes auf eine sichere Gebrauchsdauer auswirken. Zur Erfassung dieser Eigenspannungsänderungen wird ein zerstörungsfreier Ansatz auf Grundlage einer experimentellen Modalanalyse vorgestellt. Die daraus gewonnen Daten fließen unmittelbar in ein erarbeitetes Betriebsfestigkeitsmodell ein. Abschließend werden die generierten Modellergebnisse mit experimentell ermittelten Lebensdauern verglichen und bewertet.
Planar tomography and numerical analysis for damage characterization of impact loaded RC plates
(2020)
The damage analysis of reinforced concrete (RC) is of high interest for reasons of effective maintenance and structural safe-ty of buildings. The damage structures of RC plates loaded by an impact were investigated, applying X-ray planar tomogra-phy and finite element method (FEM). Planar tomography allows getting three-dimensional information of the RC elements and the damage including crack, spalling and scabbing. The FEM model validated on the tomography data justifies the appli-cation for further predictions of the damage description. In this study, we investigated concrete plates of three different thick-ness subjected to impacts at different low- and medium-velocity, whereby the used impactor had a flat tip, which resulted in small penetrations on the front side and scabbing on the rear side. In order to quantify the damage, the damage volume and its distribution through the plate were computed and the correlations between degree of damage and impact velocity were found out.
Within the presented research project, experimental and numerical investigations were performed to develop a thin-shelled, modular, mobile element system made of a micro-reinforced ultra-high-performance ductile concrete (DUCON®). Material parameters were experimentally determined to adapt the material model within the numerical analysis applying the Drucker-Prager relationship. Afterwards, for validation of the numerical models, quasi-static and high-velocity impact tests were performed on plate-like structures. Finally, a suitable geometry of transportable barrier elements will be designed, which provides a maximum of resistance against impact by a minimum of weight and a maximum of mobility.
Reinforced concrete (RC) is used as structural material in most diverse civil engineering applications. For the variability of its physical properties it is still an engineering challenge to meet all necessary requirements for the prediction of dynamic effects under impact loading. In this paper, investigations are shown within the scope of quantifying and evaluating the damage caused by an impact. The experimental investigations are performed in the field of low- and medium-velocity impact. The chosen flat nose shape results in small penetrations on the top side and scabbing on the bottom side. The plate is scanned with an adapted planar tomographic examination after the impact, and the damage is analysed, afterwards. Cracks and spalling are made visible with a reconstruction. The numerical model validated on the tomographic results justifies the application for further predictions of the damage description.