Datei im Netzwerk der BAM verfügbar ("Closed Access")
Filtern
Dokumenttyp
- Vortrag (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- nein (3)
Schlagworte
Organisationseinheit der BAM
- 5 Werkstofftechnik (1)
- 5.6 Glas (1)
Eingeladener Vortrag
- nein (3)
Efficient energy provision using fuel cells requires effective hydrogen storage capacities. Glass is a material of low intrinsic hydrogen permeability and is therefore a promising material for hydrogen storage containers or diffusion barriers. Pioneer work on oxidic glasses seems to indicate a correlation between glass composition and hydrogen permeation, which was mainly derived from the behavior of silica glass. In this study, we focus on the relationship between topologic (free volume; network polymerization) and thermodynamic (configurational entropy) glass parameters. Experiments were performed well below the glass transition temperature, which excludes significant structural relaxation and chemical dissolution of hydrogen. The compositional dependence of seven glasses on the SiO2-NaAlO2 join pointed out that in fully polymerized glasses the H2 permeability cannot be solely derived from the total free volume of the glass structure. Hence, evidence is provided that the size distribution of free volume contributes to hydrogen diffusion and solubility. Additionally, results indicate that hydrogen permeability of the glasses is affected by the configurational heat capacity ΔCp at Tg.
Surface water-induced broadening of crack initiation probability of zinc aluminosilicate glasses
(2017)
The crack generation probability by Vickers indentation of glass surfaces is known to be influenced by the atmospheric conditions under which the Vickers experiment is performed [1]. However, the effect of surface water due to preparation and storage of the glass surfaces prior to the indentation is less understood. Therefore, zinc aluminosilicate glasses of perzinc, peraluminous as well as nominally NBO-free meta-aluminous composition were prepared by melt quenching. Surfaces of cut and polished specimens of these glasses were either stored for seven days under constant atmosphere (50 °C; 55% RH) or etched (HF: 20vol%; 20 min) shortly before indentation. The obtained results show a strong variation of crack initiation behavior depending on chemical composition of the glasses as well as sample preparation. All experiments were performed in dry nitrogen gas to minimize the influence of atmospheric humidity during indentation. While the regular glass surfaces exposed to humid air prior to Vickers indentation show a broad distribution of crack initiation probability, this distribution narrows down if etched glass surfaces are tested. SNMS depth profiling shows a water enriched layer at the surface (150 μm) for the non-etched and stored specimens leading to the conclusion that surface water causes broadening of the crack initiation probability of glass surfaces.
Zinc aluminosilicate glasses are studied by Vickers indentation in order to reveal the effect of non-bridging oxygen (NBO) and incorporation of aluminium in the silica network on micromechanical properties. Therefore glasses of perzinc and peraluminous compositions as well as nominal NBO-free glasses on the meta-aluminous join are prepared by melt quenching.
To investigate the effect of environment on hardness, crack generation and propagation indentation was performed in air and in dry nitrogen atmosphere on HF etched surfaces. For constant silica fractions the increase in the Zn-to-Al ratio led to a characteristic step-like course of the micromechanical properties at the meta-aluminous composition.
The effect of the cation size is verified by comparing the results with those obtained in the calcia-alumina-silica system.