Datei für die Öffentlichkeit verfügbar ("Open Access")
Filtern
Dokumenttyp
Referierte Publikation
- nein (5) (entfernen)
Schlagworte
- Concrete (1)
- Damage detection (1)
- Imaging (1)
- Impulse response function (1)
- Pile integrity (1)
- Reflection seismics (1)
- Reverse Time Migration (1)
- Reverse time migration (1)
- Sine sweep excitation (1)
- Synthetic Aperture Focusing Technique (1)
Organisationseinheit der BAM
To improve ultrasonic imaging of concrete structures, we transferred a seismic migration technique, the Reverse Time Migration (RTM), to non-destructive testing. A 2D elastic RTM algorithm was tested on synthetic ultrasonic echo data. Compared to the typically used synthetic aperture focusing technique (SAFT) as well as our acoustic RTM algorithm, the presented elastic RTM results show an enhancement in imaging vertical reflectors and complex features inside the 2D numerical concrete model.
Defect detection in concrete pile using impulse response measurements with sine sweep excitations
(2015)
For pile integrity inspection, a low cost and portable shaker was used to create the sine sweep signal for pile excitation. The impulse response function, calculated by the deconvolution of pile response from the sine sweep excitation, was proposed to identify the echoes in the piles due to the pile’s impedance changes. The proposed methodology has been evaluated and validated both numerically and experimentally. Based on the results from the simulations and experiments, it was found that the impulse response measurement with sine sweep excitation could be an effective tool to detect the echoes of the pile toe and the defects in the pile.
Ultrasonic echo testing is widely used in non-destructive testing in civil engineering to investigate concrete structures, to measure thickness, and to locate and characterise built-in components or inhomogeneities. Currently, synthetic aperture focusing techniques are mostly used for imaging. These algorithms are highly developed but have some limitations. For example, it is not possible to image the lower boundary of built-in components like tendon ducts or vertical reflectors. We adopted reverse time migration for non-destructive testing in civil engineering in order to improve the imaging of complicated structures in concrete. By using the entire wavefield, including waves reflected more than once, there are fewer limitations compared to synthetic aperture focusing technique algorithms. As a drawback, the required computation is significantly higher than that for the techniques currently used. Simulations for polyamide and concrete structures showed the potential for non-destructive testing. The simulations were followed by experiments at a polyamide specimen. Here, having acquired almost noise-free measurement data to test the algorithm, we were able to determine the shape and size of boreholes with sufficient accuracy. After these successful tests, we performed experiments at a reinforced concrete foundation slab. We obtained information from the data by reverse time migration, which was not accessible by traditional imaging. The imaging of the location and structure of the lower boundary of the concrete foundation slab was improved. Furthermore, vertical reflectors inside the slab were imaged clearly, and more flaws were found. It has been shown that reverse time migration is a step forward in ultrasonic testing in civil engineering.
Das Ultraschall-Echo-Verfahren ist ein klassisches Verfahren in der zerstörungsfreien Prüfung zur Bestimmung der Geometrie von Bauteilen. Die Prüfaufgaben beinhalten unter anderem die korrekte Dickenbestimmung der Baukörper sowie die Lokalisierung von Einbauteilen und Fehlstellen. Stand der Technik bei den Abbildungsverfahren ist die SAFT–Rekonstruktion (Synthetic Aperture Focusing Technique). Diese Verfahrensfamilie hat Schwierigkeiten bei der Darstellung von steilen Grenzflächen und komplizierten Strukturen, wie beispielsweise Stufen oder Unterkanten von Hohlräumen und Hüllrohren. Als Alternative werden seit einiger Zeit geophysikalische Migrationsmethoden evaluiert. Am Beispiel eines Stahlbetonfundamentes mit verschiedenen Bewehrungsgehalten, unterschiedlichen Dicken sowie zwei Pfahlköpfen wurden die Kirchhoff-Migration und die Reverse-Time Migration (RTM) getestet. Die strahlenbasierte Kirchhoff-Migration arbeitet ähnlich wie die SAFT-Rekonstruktion. Die RTM basiert auf der vollständigen Wellengleichung.
In einem ersten Schritt wurden die Methoden an einem synthetischen, auf der akustischen Wellengleichung basierenden zweidimensionalem Modell getestet. Im zweiten Schritt wurden reale Messdaten, die mit Scherwellenprüfköpfen an der Fundamentplatte aufgenommen wurden, bearbeitet. Der Einsatz eines Scannersystems vereinfachte die Messungen. Die Experimente, die in diesem Manuskript vorgestellt werden, sind von bedeutendem Interesse für die Evaluierung geophysikalischer Migrationsmethoden an analogen Modellen.
Ein Vergleich der Migrationsergebnisse mit den bisherigen SAFT-Ergebnissen zeigt insbesondere für die RTM eine deutliche Verbesserung in der Abbildung der Bauteilgeometrie. Vertikale Kanten konnten dargestellt sowie die Lage und Struktur der Rückwände exakter reproduziert werden. Grenzen bestehen noch bei der Darstellung der Pfahlköpfe, da die von dem zylinderförmigen Pfahl kommenden Signale verrauscht sind. Ursachen dafür sind u.a. die Bewehrung, Randeffekte sowie Mehrfachreflexionen an dem Pfahlschaft.