Verlagsliteratur
Filtern
Erscheinungsjahr
- 2024 (274)
- 2023 (584)
- 2022 (675)
- 2021 (683)
- 2020 (725)
- 2019 (658)
- 2018 (690)
- 2017 (678)
- 2016 (658)
- 2015 (655)
- 2014 (712)
- 2013 (755)
- 2012 (806)
- 2011 (658)
- 2010 (679)
- 2009 (485)
- 2008 (522)
- 2007 (403)
- 2006 (438)
- 2005 (428)
- 2004 (406)
- 2003 (438)
- 2002 (399)
- 2001 (234)
- 2000 (238)
- 1999 (186)
- 1998 (107)
- 1997 (95)
- 1996 (134)
- 1995 (116)
- 1994 (61)
- 1993 (45)
- 1992 (38)
- 1991 (36)
- 1990 (33)
- 1989 (35)
- 1988 (33)
- 1987 (23)
- 1986 (21)
- 1985 (152)
- 1984 (74)
- 1983 (177)
- 1982 (150)
- 1981 (162)
- 1980 (153)
- 1979 (135)
- 1978 (137)
- 1977 (157)
- 1976 (143)
- 1975 (168)
- 1974 (135)
- 1973 (4)
- 1972 (9)
- 1971 (10)
- 1970 (16)
- 1969 (94)
- 1968 (65)
- 1967 (59)
- 1966 (67)
- 1965 (58)
- 1964 (65)
- 1963 (50)
- 1962 (63)
- 1961 (80)
- 1960 (53)
- 1959 (67)
- 1958 (88)
- 1957 (79)
- 1956 (68)
- 1955 (69)
- 1954 (45)
- 1953 (17)
- 1952 (13)
- 1951 (8)
- 1950 (17)
- 1944 (20)
- 1942 (22)
- 1941 (20)
- 1940 (7)
- 1939 (33)
- 1938 (14)
- 1935 (3)
- 1934 (17)
- 1933 (15)
- 1930 (1)
- 1916 (1)
- 1903 (1)
- 1902 (1)
- 1901 (1)
- 1900 (1)
- 1899 (1)
- 1898 (1)
Dokumenttyp
- Zeitschriftenartikel (12920)
- Beitrag zu einem Sammelband (2048)
- Beitrag zu einem Tagungsband (2025)
- Buchkapitel (351)
- Sonstiges (159)
- Zeitschriftenheft (Herausgeberschaft für das komplette Heft) (143)
- Forschungsbericht (125)
- Monografie (38)
- Dissertation (27)
- Sammelband (Herausgeberschaft für den kompletten Band) (21)
- Corrigendum (19)
- Handbuch (16)
- Tagungsband (Herausgeberschaft für den kompletten Band) (11)
- Vortrag (3)
- Posterpräsentation (2)
- Habilitation (1)
- Newsletter (1)
Sprache
- Englisch (11543)
- Deutsch (6205)
- Mehrsprachig (85)
- Russisch (22)
- Französisch (20)
- Ungarisch (9)
- Japanisch (5)
- Italienisch (4)
- Polnisch (4)
- Niederländisch (3)
Schlagworte
- Fluorescence (221)
- Concrete (190)
- Corrosion (170)
- Nanoparticles (154)
- Non-destructive testing (133)
- XPS (119)
- Additive manufacturing (118)
- Simulation (118)
- Korrosion (115)
- Quantum yield (107)
Organisationseinheit der BAM
- 6 Materialchemie (906)
- 1 Analytische Chemie; Referenzmaterialien (787)
- 8 Zerstörungsfreie Prüfung (668)
- 7 Bauwerkssicherheit (655)
- 9 Komponentensicherheit (524)
- 5 Werkstofftechnik (447)
- 4 Material und Umwelt (402)
- 6.3 Strukturanalytik (355)
- 8.5 Röntgenbildgebung (240)
- 6.1 Oberflächen- und Dünnschichtanalyse (217)
Paper des Monats
- ja (99)
Eingeladener Vortrag
- nein (3)
The recommendation is based on the coauthors’ work organized by the RILEM TC 256-SPF ‘‘Spalling of concrete due to fire: testing and modelling’’. The Committee has defined two types of screening tests for characterization of concrete propensity to fire spalling: Material screening tests and Product screening tests. Definitions of both types of tests are given in the paper. The following recommendations apply to Material screening tests. The material screening tests described in these recommendations are a set of minimum requirements to test concrete spalling propensity (for example, the minimal specimen size). This document covers the aspects of concrete characterization, specimen geometries, storage conditions, test methods and measured parameters.
Defects are still common in metal components built with Additive Manufacturing (AM). Process monitoring methods for laser powder bed fusion (PBF-LB/M) are used in industry, but relationships between monitoring data and defect formation are not fully understood yet. Additionally, defects and deformations may develop with a time delay to the laser energy input. Thus, currently, the component quality is only determinable after the finished process.
Here, active laser thermography, a nondestructive testing method, is adapted to PBF-LB/M, using the defocused process laser as heat source. The testing can be performed layer by layer throughout the manufacturing process. We study our proposed testing method along experiments carried out on a custom research PBF-LB/M machine using infrared (IR) cameras.
Our work enables a shift from post-process testing of components towards in-situ testing during the AM process. The actual component quality is evaluated in the process chamber and defects can be detected between layers.
In this work, the thermoelectric material calcium cobaltite Ca3Co4O9 (CCO), a promising p-type conducting thermoelectric oxide with anisotropic properties, was processed by the powder aerosol deposition method (PAD) to form a dense ceramic CCO film with a thickness in the µm range. The prepared films were characterized regarding their microstructure and thermoelectric properties between room temperature and 900 °C. After heat treatment at 900 °C, the CCO PAD film in-plane shows excellent properties in terms of electrical conductivity (280 S/cm at 900 °C) and Seebeck coefficient (220 µV/K at 900 °C). The calculated power factor in-plane (ab) reaches with 1125 µW/(m K2) 40 % of the single crystal value, surpassing the known-properties of CCO bulk ceramics. Examination of the microstructure shows a strong fiber texture of the film as well as a strong coarsening of the grains during the first heat treatment up to 900 °C.
Development and fundamental understanding of precious-group-metal-free electrocatalysts is hampered by limitations in the quantification of the intrinsic activity of different catalytic sites and understanding the different reaction mechanisms. Comparing isomorphic nitrogen-doped carbons, Zn-N-Cs and Fe-N-Cs with the common tetrapyrrolic motif, a catalyst-independent outer-sphere rate-determining step in the alkaline oxygen reduction reaction is observed. Density functional theory (DFT) simulations on tetrapyrrolic model structures indicate the highest occupied molecular orbital (HOMO) level as a good descriptor for the catalytic activity. Contour plots suggest that the electron transfer occurs directly from the tetrapyrrolic coordination site, rather than from the metal center. Metal-free tetrapyrrolic N4 sites are discovered to be highly active oxygen reduction reaction (ORR) active sites in alkaline that reach turnover frequencies (TOF) of 0.33 and 1.84 s−1 at 0.80 and 0.75 VRHE in the order of magnitude of tetrapyrrolic Fe–N4 sites in the acidic ORR. While Zn-coordination lowers the HOMO level and therefore the catalytic activity, Fe-coordination lifts the HOMO level resulting in TOF values of 0.4 and 4 s−1 for tetrapyrrolic Fe–N4 sites at 0.90 and 0.85 VRHE, respectively. At higher mass activities, the peroxide reduction becomes rate-limiting, where highest peroxide production rates are observed for the nitrogen-doped carbon.
L-Lactide (LA) was polymerized with neat tin(II) 2-ethylhexanoate (SnOct2) in toluene at 115 °C at low concentration with variation of the LA/Cat ratio. Cyclic polylactides (cPLAs) with number average molecular weights (Mn) between 7 000 and 17 000 were obtained. MALDI-TOF mass spectrometry also revealed the formation of a few percent of linear chains. Crystalline cPLAs with Mn around 9 000 and 14 000 were annealed at 140 °C in the presence of ScOct2 or dibutyl-2-stanna-1,3-dithiolane (DSTL). Simultaneously, crystallites of extended linear chains and crystallites of extended cycles were formed regardless of the catalyst, indicating that transesterification reaction proceeded different for linear chains and for cycles, governed by thermodynamic control. The formation of extended chain crystallites with low dispersity indicates the existence of symproportionation of short and long chains. A complementary experiment was carried out with a PLA ethyl ester composed mainly of linear chains with a small fraction of cycles
This article presents two case studies for a full-probabilistic assessment of existing concrete bridges combined with the use of the finite element method for the evaluation of the internal forces. Since the structures already exist, additional information about material parameters and loading conditions can be collected. With a sensitivity analysis, the contribution of each parameter to the total uncertainty is examined and the relevance of their actual value and variation is shown. The first case study is a single-span reinforced concrete frame bridge on the German highway A92 constructed in the year 1985. With a span of around 5 m, but a width of 27 m and a skewness of 70 gon, the bridge is modelled as a three-dimensional finite element model. The second case study is a two-span reinforced concrete frame bridge from 1986 with span lengths of about 7,50 m each. The superstructure is a 45 cm thick slab and the base plate has a thickness of 80 cm. The assessment is performed based on the semi-probabilistic safety concept according to the codes first and secondly with a full-probabilistic calculation. In this article the selection of parameters for the relevant input data are presented and discussed. The results of the sensitivity analysis are used for the setup of measurements to acquire important data for the modelling in the critical limit states.
In reliability assessment of existing bridges, collected information about the structure can be utilized to modify partial safety factors and to refine characteristic values individually. In this way, uncertainties covered in initial calculation models and arising from assumptions can be reduced as well as biases identified and corrected. This allows for more realistic assessments and more appropriate decisions on actions to be taken. However, the on-site observation of information is generally associated with certain costs. For this reason, an efficient data-supported reassessment requires that only the individually relevant testing tasks are solved. Additional sensitivity analyses can further be used to specify the requirements on certain inspections, such as the testing result quality to be achieved, in order to avoid too imprecise or too expensive measurements on-site. In this contribution, the methodology for the demand-actuated definition of measurement objectives is demonstrated using the example of non-destructive concrete testing methods and findings from reassessments of two prestressed concrete bridges. Each case study includes the semi-probabilistic identification of structural weak points in ultimate and serviceability limit states, a comparison with respective probabilistic sensitivity analyses, and the subsequent derivation of parameters that are a) measurable and b) highly relevant in the individual reliability analyses.
AbstractIm zweiten Teil dieses Beitrags werden die Grenzzustandsfunktionen für die Nachweise im Grenzzustand der Tragfähigkeit für Biegung mit Normalkraft, Querkraft mit Querkraftbewehrung und Torsion vorgestellt. Die Eingangsgrößen der mechanischen Widerstandsmodelle werden durch zahlreiche Abbildungen illustriert. Auf Grundlage der probabilistischen Modelle aus dem ersten Teil dieses Aufsatzes und der mechanischen Modelle aus diesem zweiten Teil werden die probabilistischen Nachweise geführt. Die Ergebnisse aus der Zuverlässigkeitsanalyse werden mit den semiprobabilistischen Berechnungsergebnissen verglichen. Mittels Parameterstudien wird gezeigt, welche Eingangsgrößen im Standsicherheitsnachweis die größten Einflüsse auf die Bauwerkszuverlässigkeit haben. Die Messung dieser Parameter ist entsprechend besonders nützlich. Auf dieser Basis wird abschließend gezeigt, welche Chancen sich aus der Durchführung von zerstörungsfreien Bauwerksprüfungen für die Nachrechnung ergeben.
AbstractDer Erhalt der bestehenden Verkehrsinfrastruktur ist eine große Herausforderung, da die Bauwerke fortwährend altern, die Verkehrsbeanspruchung zunehmend steigt und deren umfassender Ersatz mit Blick auf begrenzte Budgets und Ressourcen nicht möglich ist. An Bestandsbauten können tatsächliche Materialkennwerte, Geometrien oder Einwirkungen objektspezifisch erfasst werden. Die Nachrechnung von Bestandsbrücken erfolgt in Deutschland gemäß Nachrechnungsrichtlinie nach Stufen 1 und 2 mit dem semiprobabilistischen Teilsicherheitskonzept. Nur im Ausnahmefall wird eine messbasierte Bewertung oder eine wissenschaftliche Betrachtung gemäß Stufen 3 und 4 durchgeführt. Die Einbeziehung zusätzlicher Informationen aus der Zustandserfassung bietet jedoch viele Vorteile für eine realitätsnahe Bewertung. In probabilistischen Berechnungsmethoden können solche Kenntnisse direkt in der Berechnung berücksichtigt werden. Ziel dieses zweiteiligen Beitrags ist die Vorstellung der Potenziale und Vorteile bei der direkten Berücksichtigung der Ergebnisse von zerstörungsfreien Prüfverfahren bei der Zustandsbewertung von Brückenbauwerken. Das Konzept wird an einer Spannbetonbrücke vorgestellt. Der erste Teil befasst sich mit den Möglichkeiten zur Überführung der Eingangswerte der üblichen semiprobabilistischen Berechnung in stochastische Modelle. Ausgehend von der semiprobabilistischen Nachrechnung nach derzeitigem Regelwerk wird die probabilistische Modellierung aller relevanten Basisvariablen für die Grenzzustände der Tragfähigkeit Biegung, Querkraft und Torsion ausgeführt.
Das Laserstrahl-Lichtbogen-Hybridschweißverfahren kombiniert Laserstrahl- und Lichtbogenschweißverfahren in einem gemeinsamen Schmelzbad. Das Verfahren wurde Ende der 70er Jahre entwickelt, um die Synergieeffekte der Schweißprozesse effektiv zu nutzen. Durch die hohe Strahlungsintensität des Laserstrahls werden hohe Einschweißtiefen erreicht. Es ist möglich, die Anzahl der Schweißlagen zu reduzieren und somit die thermische Belastung des Grundwerkstoffes zu senken, da der Wärmeeintrag verringert wird. Die Überbrückung von Spalten und Kantenversatz kann durch die Zufuhr eines geschmolzenen Zusatzdrahtes durch das MSG-Verfahren erreicht werden. Der Zusatzdraht kann zudem das metallurgische Gefüge positiv beeinflussen. Daher ist das Laser-Hybridschweißverfahren ideal für das einlagige Schweißen von Dickblechen und wird bereits erfolgreich in der Schiffbauindustrie zum Schweißen von Blechen mit einer Dicke von bis zu 15 mm verwendet. Obwohl Hochleistungslaser heutzutage bereits im Multi-Kilowatt-Bereich verfügbar sind, sind sie für den industriellen Einsatz nur auf Stahlbleche mit einer Dicke von max. 15 mm geeignet. Hohe Abkühlgeschwindigkeiten, gravitationsbedingtes Austropfen beim einlagigen Schweißen von Dickblechen, Prozessinstabilitäten bei höheren Laserleistungen und Schweißnahtimperfektionen wie Rissbildung sind einige Faktoren, die den Einsatz von Laser-Hybridschweißtechnologien aktuell begrenzen. Ohne eine Badstütze ist eine Verringerung der Schweißgeschwindigkeit und somit der Abkühlgeschwindigkeit aufgrund unzulässiger Wurzelüberhöhungen oder gravitationsbedingtem Austropfen nicht möglich. Bei herkömmlichen Badstützen ist es allerdings erforderlich, dass sie mechanisch befestigt und die Wurzel entfernt oder nachbearbeitet werden muss. In dieser Arbeit wird als Alternative das innovative Konzept der elektromagnetischen Schweißbadsicherung vorgestellt und die Fähigkeiten dieses Verfahrens erläutert.
Auf dem Weg zum einlagigen Schweißen von dickwandigen Bauteilen – Prozesse, Potenziale, Beispiele
(2024)
Bislang kommt das Laserstrahlschweißen bzw. Laserhybridschweißen hauptsächlich bei Dickblechen mit einer Wandstärke von bis zu 15 mm zum Einsatz. Für Anwendungen über 20 mm war dieses Verfahren aufgrund einiger Herausforderungen bisher nur bedingt realisierbar. Die von der Ausgründung WeldNova GmbH der Bundesanstalt für Materialforschung und -prüfung (BAM) entwickelte Schweißbadsicherung ermöglicht nun ein einlagiges Schweißen von bis zu 40 mm Wandstärken mit einer Laserleistung von bis zu 20 kW.
Aschen und Schlacken aus der thermischen Abfallbehandlung stellen mit rund 25% Massenanteil die größte Reststofffraktion dar. In Deutschland fallen pro Jahr rund 6 Millionen Tonnen an. Während sich die Verwertung der metallischen Anteile problemlos gestaltet, werden an die mineralische Fraktion Anforderungen bezüglich der möglichen Freisetzung von Schwermetallen sowie Chlorid und Sulfat gestellt. In der Ersatzbaustoffverordnung sind für Aschen und Schlacken aus der Abfallverbrennung zwei Materialklassen mit unterschiedlich hohen Anforderungen an die Umweltverträglichkeit definiert. Im Rahmen eines Forschungsprojekts wurde untersucht, ob mit Abtrennung der Feinfraktion von 0–2mm die höhere Materialklasse HMVA-1 erreicht werden kann. Im Ergebnis wurde eine Verbesserung des Auslaugverhaltens erzielt, doch nicht in dem Maß, dass eine Qualität nach HMVA-1 erreicht wird. Rostaschen halten aber die Anforderungen zur Deponierung auf einer DK I-Deponie sowie die Anforderungen zur Verwertung gemäß HMVA-2 sicher ein.
Soybean oil takes around half of the vegetable oil resources in the world, increasing in importance constantly. Besides, soy oil plants have experienced numerous accidents due to the coexistence of soy flour and hexane (as a solvent) in the extraction process, thus creating a hazardous environment. This study aims to find the maximum pressure, the maximum rate of pressure rise, and the minimum ignition energy of soy flour−hexane mixtures through specific experiments by varying the concentration of fuels in air and ignition mechanism (chemical igniters or exploding wires). The results have shown that soy flour alone is hard to ignite, whereas adding hexane even in small amounts increases the hazard and the severity of the explosions considerably. Eventually, the substitution of hexane with a greener and safer extraction agent should be of utmost focus.
This research was aimed at comparing the fire characteristics of different types of pepper in the context of explosion prevention. The following characteristics were studied: explosion pressure Pmax and Kst at selected concentrations, ignition temperature of the deposited dust layer from the hot surface, and minimum ignition energy. The comparison of the chemical properties of the used types of pepper was performed using TG/DSC. The results of the measurements suggest that different types of peppers exhibit different explosion characteristics. Each sample reached the maximum value of the explosion pressure and rate of pressure rise at different concentrations. The volume of the explosion chamber used also influenced the explosion characteristics. It is a consequence of the fact that the explosion characteristics strongly depend on the mechanism of action of a particular igniter. The minimum effect on the safety characteristics was observed when measuring the minimum ignition energy and the minimum ignition temperature of the dust layer from the hot surface. The results of the measurements suggest that different types of peppers exhibit different explosion characteristics. This information should then be considered in explosion prevention.
AbstractThis research aims to detect and analyze critical internal and surface defects in metal components manufactured by powder bed fusion of metals using a laser beam (PBF‐LB/M). The aim is to assess their impact on the fatigue behavior. Therefore, a combination of methods, including image processing of micro‐computed tomography (CT) scans, fatigue testing, and machine learning, was applied. A workflow was established to contribute to the nondestructive assessment of component quality and mechanical properties. Additionally, this study illustrates the application of machine learning to address a classification problem, specifically the categorization of pores into gas pores and lack of fusion pores. Although it was shown that internal defects exhibited a reduced impact on fatigue behavior compared with surface defects, it was noted that surface defects exert a higher influence on fatigue behavior. A machine learning algorithm was developed to predict the fatigue life using surface defect features as input parameters.
The Great Pacific Garbage Patch, a significant collection of plastic introduced by human activities, provides an ideal environment to study bacterial lifestyles on plastic substrates. We proposed that bacteria colonizing the floating plastic debris would develop strategies to deal with the ultravioletexposed substrate, such as the production of antioxidant pigments. We observed a variety of pigmentation in 67 strains that were directly cultivated from plastic pieces sampled from the Garbage Patch. The genomic analysis of four representative strains, each distinct in taxonomy, revealed multiple pathways for carotenoid production. These pathways include those that produce
less common carotenoids and a cluster of photosynthetic genes. This
cluster appears to originate from a potentially new species of the Rhodobacteraceae family. This represents the first report of an aerobic anoxygenic photoheterotrophic bacterium from plastic biofilms. Spectral analysis showed that the bacteria actively produce carotenoids, such as betacarotene and beta-cryptoxanthin, and bacteriochlorophyll a. Furthermore, we discovered that the genetic ability to synthesize carotenoids is more common in plastic biofilms than in the surrounding water communities. Our findings suggest that plastic biofilms could be an overlooked source of bacteria-produced carotenoids, including rare forms. It also suggests that photoreactive molecules might play a crucial role in bacterial biofilm communities in surface water.
The synergistic behavior of different silicon compounds is investigated in flame retardant biocomposites with aluminum trihydroxide (ATH) as the main flame retardant. The paper shows a new approach towards sustainable biocomposites through the implementation of thermoplastic starch (TPS), leather fibers from industrial waste streams, and non-hazardous flame retardants and synergists. In these multicomponent systems, the different components address different modes of action in the fire scenario. When ATH is partially substituted by glass frits or layered silicates, fire performance is enhanced without changing the total amount of filler in the polymer. In a biocomposite with 25 phr of fiber and 90 phr of ATH, substituting 5 phr of ATH for layered silicates increased the LOI from 31.5 vol % to 34.8 vol %, decreased the peak of heat release by 20%, and increased the UL 94 rating from V-1 to V-0.
Referenzmaterialien sind entscheidend für die Qualitätssicherung von Laboratorien. Diese nutzen Referenzmaterialien unter anderem zur Validierung von Messverfahren und zur Kalibrierung von Geräten. Dabei ist zu beachten, dass zertifizierte Merkmalswerte stets eine gewisse Unsicherheit aufweisen. Die Ermittlung dieser Unsicherheitsbeiträge ist Gegenstand des Artikels. Des Weiteren wird ein Vorgehen beschrieben, wie die Unsicherheit von Messverfahren mit Hilfe eines Referenzmaterials bestimmt werden kann.
The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (Kd), can be considered as one of the most important characteristics for any antibody–antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise and effort that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC50 approaches the Kd value in the case of infinitely small concentrations of the reagents. A two-dimensional dilution of the reagents leads to an asymptotic convergence to Kd. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.
Effects of NBR formulations on properties for high-pressure gas systems were tested. Functionalized silica enhances typical properties to a comparable range like CB. The balance of additives results in suitable RGD performance. Silica filled NBR shows lower H2 uptake compared to non-plasticized CB filled NBR. Morphology of CB filled NBR is less affected by H2 than silica filled grades.