Eigenverlag BAM
Filtern
Dokumenttyp
Sprache
- Englisch (12)
Referierte Publikation
- nein (12)
Schlagworte
- Cement (12) (entfernen)
The paper showed that the STA behave completely different in pastes with LSF and cement, respectively, as well as with or without PCE. While STA can affect plastic viscosity and yield stress in LSF and cement pastes, the addition of PCE causes that the STA have mainly an impact on plastic viscosity, except DGUM and ST-low. The performance of STA in LSF and cementitious systems can vary greatly due to different ionic strengths of the liquid phase. The charges due to modification of the starches have an intense influence on the rheological properties in pastes. The combined use of PCE and STA can lead to a significant increase of the plastic viscosity without a strong effect to the yield stress.
For the evaluation of the effectivity of STA the ionic strength of the liquid phase and the solid volume fraction of the binder have to be taken into account. Further influences can arise from grain size and aggregate content as well as the temperature, which were not discussed in this paper.
Urbanisation, habitat, environment, infrastructure and sustainability are major global challenges of the 21st century. By planning, exploiting of resources, building, and maintaining, civil engineers and relevant adjacent disciplines have been carrying a large responsibility for the existing environmental problems. Civil engineers are responsible for 70% of all material uses in the world, and civil construction has been dominating the growth of the developing world for the next decades, with enormous impact on the global climate as well as the distribution of wealth and quality of living in the world.
Today a variety of sustainable construction concepts have been developed and discussed. Recently a UNEP report was published, which provides a comprehensive overview of the challenges and potentials in the future from a scientific and industrial point of view. Sustainable solutions based on abundantly available resources (pozzolana and clay) or on renewable instead of limited industrial by-products (e.g. agricultural waste ashes) and new construction echnologies do exist. By applying, promoting and developing the implementation of the existing knowledge into real life constructions, civil engineers also hold the key for the mitigation of the global challenges. Using best practice sustainable construction solutions is particularly of highest importance in the developing world, since the implementation at an early stage creates the highest leverage for positive effects.
Why Africa can spearhead innovative and sustainable cement and concrete technologies globally
(2016)
The perception of concrete in the society as well as in the politics is rather negative. This becomes obvious in the fact that the phrase “concrete jungle” has become synonym for hapless living with no perspectives. In politics and research funding, it is also not easy to create a broader audience, since concrete is falsely considered as old-fashioned material that is sufficiently understood today and does not need further considerations, particularly compared to allegedly newer materials. However, particularly since the last two decades the technology has completely changed. Binders of today are no more the same binders as used before, and concrete mixture compositions of today diverge quite significantly from compositions in the past. There is little understanding world-wide about that. This causes that potentials the concrete technology bears are wasted.
In the broadly found opinion that concrete is old-fashioned and ugly, it is ignored that architectural sins are not inherent to the material, which actually is extremely versatile and CO2-friendly compared to all other construction materials available. It is also ignored that 98% of the outer Earth’s crust are made of the elements cement and concrete are made from, and therefore it will be an illusion to believe that the complementary 2% can create materials to develop regions and infrastructures in less developed areas in the world.
For betterment in Africa the infrastructural development should have highest priority, since poor connections between settlements are responsible for enormous Price increases [2], and urban traffic congestion is responsible for an incredible loss of productivity. It is not unrealistic to assume that earners that are dependent on a car get stuck in traffic about 3-4 hours per day in cities like Lagos, Nairobi or Dar es Salaam. However, the traffic congestions do not only affect the car owners negatively but the living of the entire urban population every day.
Besides infrastructure, housing should be the other priority, since a large part of the African population does not live in adequate condition. This is a societal problem, since unequal Distribution of wealth is a major driving force for instability in societies. The latter has a global impact, since 8 many phenomena that can be observed all over the world such as political radicalism, xenophobia, terrorism, and migration can often be linked to instable societies.
However, the importance of infrastructure has an even wider range. Most African countries go through a change process recently. In order to strengthen very positive perspectives, the focus in politics and research funding is put on issues such as agriculture, energy, and health, which are without doubt extremely important issues. However, it is typically overlooked that all enhancements in these areas can only become effective, when an infrastructure is created to support the implementation of better concepts. Mobility is the key to a prosperous future, and mobility can only be granted by infrastructural construction activities. Hence, compared to many other regions in the world, cement and concrete technologies have a significantly higher relevance in Africa.
The use of starch and its derivatives in concrete as an admixture to modify relevant properties of concrete is on the increase in recent times. It is known to modify the rheology, to affect the hydration kinetics of cement, and influence on initial and final setting time of cement. This paper examines the effect of cassava starch on concrete. shrinkage properties of concrete, with and without starch addition, were studied. Various percentages (0, 0.5, 1.0, 1.5 and 2 %) of starches by weight of cement were added to concrete mixes prepared in the laboratory. Shrinkage tests were conducted for duration of up to one year. The result show that concretes with starch additions exhibit lower shrinkage, which is an indication the addition of starch as admixture in concrete improves the ability of the concrete reduce shrinkage problems.
Interactions between waste paper sludge ashes and superplasticizers based on polycarboxylates
(2016)
In many industrial nations, about two third of the paper demand is covered by recovered paper. A major process step within the treatment of waste paper is the de-inking. It is a floating process yielding paper sludge as a waste product. About 50 % of this residue is used as a fuel. In several cases it is burnt at temperature of about 850 °C and thereafter the accrued ashes are collected in the flue gas filter. During the combustion, kaolinite and calcium oxide generate gehlenite and larnite. Calcite is the main component of waste paper sludge ash (PA).The chemical and mineralogical composition of PA suggests using it as a supplementary cementitious material.
In modern construction materials technology, workability aspects gain importance, since for most modern materials the rheology and compaction ability are relevant for the operation at a hardened state. It was observed that PA significantly increases the water demand of powder systems, which can cause serious problems during the casting of mineral binder systems containing PA. It is therefore obvious that binder systems containing PA might demand for the use of superplasticizers. Superplasticizers are polymers with anionic backbone that cause electrostatic and steric repulsion effects upon adsorption on surfaces of particles and hydration phases.
In this paper interactions between superplasticizers and waste paper sludge ashes are discussed and analysed. Based on observations of changes in the zeta potential and the dispersion of the particle system, the influence of the charge density of superplasticizers is observed and time dependent effects are demonstrated.
South Africa and recently Nigeria are the only net exporter of cement in Africa, yet cements are imported into the country mainly on the basis of price competitiveness. This poses potential for scatter in the properties of the cements in the South African market as pricing seems to be the only determining factor that affects Portland cements imported. A survey of cements of grade 42.5N in the South African cement market was carried out to identify major players in the industry. The identified cements, which included four locally produced and one imported cement were then analysed for both chemical composition and physical properties in line with the Eurocode EN 196. Tests carried out include loss on ignition, chloride content, sulphate content, specific surface (Blaine), standard consistence, initial setting time, final setting time, soundness and flexural and compressive strength at 2, 7 and 28 days. The testing program was initiated as part of on-going Africa-wide cement testing competency program in partnership with BAM and PTB in Germany. The performance of the identified cements from the different local manufacturers and the imported cement were analysed and are presented in this paper. These results reveal some similarities and differences in the properties. Particularly of interest is the marked difference in the 28 days compressive strength of the cements. This paper shows that there is need for further tests across the cement industry as some of the cements failed to meet certain requirement as set by EN 196. The paper also recommends the use of proficiency testing schemes in the cement industry of the country to ensure the cement laboratories are providing results of high quality and at the same time act as a check to make sure these laboratories are not failing to meet standard requirements.
Welcome to the 2nd International Conference on Advances in Cement and Concrete Technology in Africa (ACCTA 2016), January 27– 29, 2016, held at White Sands Hotel, Dar es Salaam, Tanzania.
The first ACCTA conference that took place in January 2013 in Johannesburg was a result of an African-European collaborative research project. Due to the success of this conference, it was announced that a triennial international conference is necessary, with the next conference scheduled to take place once again in Johannesburg. Within the organisation of the conference, unfortunately some unforeseeable events arose, which would lead to either a delay of the conference in Johannesburg until 2018 or a change of venue. The great response from the international scientific community supported the option to maintain the originally scheduled date. With the support of the local organisation committee from the University of Dar es Salaam and the contributions from the University of the Witwatersrand and the University of Zagreb the conference was shifted to Dar es Salaam.
Despite the new boundary framework, we are extremely happy that it was possible to arrange an outstanding and excellent scientific programme. Therefore we would like to thank in particular the keynote speakers and all members of the international scientific community, as well as other delegates that supported the conference by their contributions and attendance. This shows us how significantly important the African cement and concrete market is for the entire global community.
Africa can become a spearhead for the future of construction with cement and concrete. The continent exhibits an enormous construction potential and due to the relatively short history of building with these materials, innovations can be adopted and adapted unbiased and without influence of stakeholders, traditions, and complicated networks of regulations. This is a fertile ground for the existing promising generation of engineers and decision makers for re-inventing cement and concrete in the best possible way.
There is no global optimum solution for concrete. The best solution in Africa is not the best solution in Europe or another part of the world, and the best solution in one particular African country is diverging from the best solution in another African country depending upon resources, supply chains, infrastructure, construction needs, traditions, available manpower, skills and technologies. Nevertheless, we can globally support our objectives to build future oriented and sustainable construction solutions by mutually learning from each other. In order to tackle the future challenges and build more sustainably and innovatively with concrete, we need to enhance interdisciplinary and cross-national skills and create networks between experts and decision makers globally.
ACCTA offers this kind of platform, and we are happy to announce that the conference reaches a high impact in the world. Delegates and speakers come from more than 40 countries in the world originating from all continents. Besides the technical content there will be plenary discussions on the most relevant topics of future binder technologies and standards and product safety with outstanding expert panellists.
We want to wish all delegates a successful conference and hope that this book can be a significant contribution for a future oriented and better concrete technology; in Africa and the entire world. Welcome to Dar es Salaam, Tanzania.
Welcome to the second symposium on Knowledge Exchange for Young Scientists (KEYS) in Accra, Ghana 7th – 9th June 2016. This symposium is part of a three phase series organised by BAM, and funded by VolkswagenStiftung. The KEYS symposia series offers a platform whereby young African scientists can get together with peers from Germany as well as with experienced academic engineers, industry specialists and scientists from across the globe for better implementation of research analysis in their respective fields of study. This primarily provides the opportunity to obtain further knowledge in the demand for the home-base innovation and growth of the education sector. It will also provide an opportunity to network with peers and gain relevant and objective knowledge. Therefore, the symposium offers adequate training to young scientists as well as gives an opportunity to network with key players in the cement and concrete industry, which will facilitate the fundamentals of knowledge transfer.
This second symposium focuses on solid waste management and importance of valorisation of suitable by-products for utilisation in the cement and concrete industry. Today, all over the world we can no longer draw on abundant resources, and more frequently, we need to develop innovative concepts for better and more sustainable construction. This change process needs international and interdisciplinary approaches. Hence, the symposium is seen as a spark for the generation of ideas and visions, how concrete construction can become more globally sustainable based on locally tailored concepts. The symposium includes keynote lectures from 9 international keynote speakers and technical papers from 22 young scientists, who were selected out of a high number of applicants based on the excellence of their scientific writing. The presentations of all participants as well as keynote lectures are represented in these proceedings.
We would like to thank all participants for their valuable contribution to the symposium. We are blessed to receive tremendous input from the distinguished keynote speakers and we thank them for their attendance. Last but not least, we would like to acknowledge the funding body, VolkswagenStiftung, for their support. We hope you enjoy the symposium and find your engagement valuable with the entire team in sustaining your professional development in the global world of cement and concrete.
Welcome to the first symposium on Knowledge Exchange for Young Scientists (KEYS) in Dar es Salaam, Tanzania, 9th – 11th June 2015. This symposium is part of a three phase series organised by BAM, and funded by VolkswagenStiftung. Each symposium will focus on relevant themes in the construction sector and will include adequate training as well as offer an opportunity to participate in informal discussions between key players and young scientists, which will facilitate the fundamentals of knowledge transfer.
Our world of cement and concrete faces tremendous challenges for the future. Without doubt cement-based materials will remain the most widely used construction materials in the world. Concrete can be made available everywhere in the world, and it is more sustainable than other materials. Nevertheless, in order to become even more sustainable, we need to find solutions to reduce CO2 generation for the cement production, to quickly solve problems of housing and infrastructures, and to cope with ever increasing customer needs in terms of performances.
There is no global optimum solution for concrete. Best concrete practices always has to be found locally and regionally based on raw materials, supply chains, and construction needs, but it can be inspired by other regions. In order to tackle the future challenges and build more innovative with concrete, we need to enhance interdisciplinary engineering skills and create networks between future decision makers.
Therefore, the KEYS symposia series offers a platform whereby young African scientists can get together with peers from Germany as well as with experienced academic engineers, industry specialists and scientists from across the globe for better implementation of research analysis in their respective fields of study. This primarily provides the opportunity to obtain further knowledge in the demand for the home-base innovation and growth of the education sector. It will also provide an opportunity to network with their peers and gain relevant and objective knowledge.
The theme for this first symposium is sub-Saharan African standards for cement and concrete research – raw materials, quality control and maintenance of cementitious products. The symposium is divided into 8 sections and includes presentations from 9 international keynote speakers and 22 young scientists, who were selected out of a high number of applicants based on the excellence of their scientific writing.
We would like to thank all participants for their valuable contribution to the symposium. We are blessed to receive tremendous input from the distinguished keynote speakers and we thank them for their attendance. Last but not least, we would like to acknowledge the funding body, VolkwagenStiftung, for their support. We hope you enjoy the symposium and find your engagement valuable with the entire team in sustaining your professional development in the global world of cement and concrete.
Portland cement, as we know it today, has its origin in Great Britain approximately 170 years ago. Since then, concrete technology has spread out to Europe, the United States, and Japan, where it became a key component for rapid industrial development. Europe, the Unites States and many Asian countries today have developed a high level of technology regarding concrete construction.
However, each of them has a unique history and as a result, different “concrete philosophy” depending upon the social, environmental and financial boundary conditions, as well as their evolution throughout the years and local construction traditions. As a result, the word concrete may refer to rather different materials in America, Europe, and Asia.
Apart from South Africa, most sub-Saharan African countries cannot look back on a similarly long cement and concrete history. Cement and concrete are rather new materials and not yet well established. This gives African engineers the unique opportunity to learn from past mistakes and to develop a concrete technology, which refers to the best available practice. However, in many sub-Saharan African countries, standards and regulations are adopted (preferably from Europe or the US) without consideration of the historical background of these standards. Although this practice helps saving resources for the implementation, it does not necessarily yield the best result in the African environment, and also from an economic point of view it might come back disadvantageously due to unnecessary overdesigning.
By comparing the differing states-of-the-art in North America, Europe, and Asia, this paper emphasizes, how regional conditions determine the practice of concrete technology in the sub-Saharan area. It is therefore important for Africa to develop a unique African concrete technology, which is perfectly fitted to the specific local conditions, even if it may vary distinctively from the established practice elsewhere. The paper concludes that African nations should effort into adapting existing principles that have proved to function well rather than adopting existing standards.