Eigenverlag BAM
Filtern
Erscheinungsjahr
- 2014 (13) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (13) (entfernen)
Referierte Publikation
- ja (13)
Schlagworte
- Bayesian approach (2)
- DIRECTT (2)
- Human factors (2)
- Iterative Rekonstruktion (2)
- NDE reliability (2)
- NDT reliability (2)
- Open space technology (2)
- POD (2)
- Structural health monitoring (2)
- Ultrasonic testing (2)
A flexible, sustainable, one-step thermal decomposition route for the synthesis of hierarchical, heteroatom doped carbon foams is presented. Task-specific semi-organic crystals combine functions for three different purposes: the carbon and heteroatom source, a foaming agent (CO2) and an in situ generable template (NaCl). Insights to the decomposition pathway were gained through FTIR/MS coupled TGA and an ultrafast out-of-furnace heating procedure and the products were analysed with (HR)SEM/TEM, EELS, FTIR, and N2 sorption. The resulting macroporous carbon foams are excellent supports for metallic nanoparticles due to their hierarchical structure, high surface area and tuneable heteroatom contents. This was demonstrated for catalytically active copper or the magnetic CoNi alloy for water purification.
The inspection of the sealing weld is an important phase for the evaluation of the acceptability of final disposal canister, but the weld is only a part of the 3D shielding of copper shell. The main tasks for reliable NDT evaluation requires an extensive evaluation of the parameters which contains typical inspection related items like repeatability, S/N ratio, POD, setting up the equipment for inspection, and all practices for inspections. The other parameters are material parameters, their variation must be taken into account in the evaluation of NDT reliability. Further parameters include human factors, i. e. human inspectors and their interaction with technical systems; their effects were studied on an example of the evaluation of eddy current data. Final parameters are related to evaluation of detected defects, which means sizing and base for acceptance and this can be done in different ways. Some examples are given and results are compared with different methods for instance between radiographic testing and ultrasonic testing by raw data analysis and PA-SAFT results. Also, preliminary curves for the evaluation of metallographic results of 55 defects will be shown by EB weld measurements. Some practical items concerning copper inspections will be also discussed related to acceptability.
Anhand von computertomografischen Messungen und Modellrechnungen werden DIRECTT-Rekonstruktionen im Vergleich mit gefilterten Rückprojektionen bewertet. Dazu wird die Rekonstruktionsqualität mittels einer zirkular erweiterten Modulations-Transfer-Funktion (MTF) und mit integralen Kenngrößen im Radon- und im Ortsraum verglichen. Zur Überprüfung der Rekonstruktionsgenauigkeit experimenteller Daten werden Mustermessungen einfacher Probengeometrien unter definierten physikalischen Bedingungen durchgeführt. Diese beinhalten die Monochromasie, die Unterdrückung von Kantenartefakten und die radiometrische Intensitätsbestimmung. Für die Qualität der Rekonstruktionen mittels DIRECTT erweisen sich sowohl unterschiedliche Rekonstruktionsfilter als auch der Verzicht auf jede Filterung als unerheblich, im Gegensatz zur gefilterten Rückprojektion.
Typische 'Missing Wedge'(MW)-Artefakte in Rekonstruktionen der Computertomografie können mit dem iterativen DIRECTT-Algorithmus (Direkte iterative Rekonstruktion computertomografischer Trajektorien) unterdrückt werden. Die durch fehlende Projektionswinkel bedingten MW-Restriktionen betreffen bisher nur Sonderapplikationen der Röntgen- und Neutronentomografie, müssen in der Nanometer auflösenden Elektronentomografie jedoch als Standard akzeptiert werden. Die MW-Artefakte werden besonders effektiv mit einer spezifischen DIRECTT-Prozedur partiell diskreter Zwischenlösungen beseitigt. Für die Beurteilung der Abbildungsqualität werden Rekonstruktionen von vollständigen und unvollständigen Mess- und Modell-Datensätzen erzeugt und mit Ergebnissen anderer Algorithmen (gefilterte Rückprojektion (FBP) und ART-Methoden) verglichen. Die Fourier-Transformierten der Rekonstruktionen demonstrieren die erfolgreiche Ergänzung der fehlenden Information im MW-Bereich. Die quantitative Bewertung der lokalen Rekonstruktionsqualität mit Methoden der räumlichen Statistik ergibt auch für unterschiedliche Signal-Rausch-Verhältnisse signifikante Vorteile gegenüber FBP und ART.
Algorithms to estimate ultrasonic testing method based on the integrated use of indicators of reliability and accuracy are presented, and built according to the nature of techniques, features of their application and evaluation purposes (comparison of techniques, introduction of new methods, test procedures, etc.). On the basis of the main revision of ISO 5725-1, 5725-2 the estimation of reproducibility and repeatability of measured characteristics determine the design of reflectors and real defects, and thus the reliability of non-destructive testing, including ultrasonic inspection of railways.
Die Sicherheit von Radsatzwellen beruht gegenwärtig auf zwei Säulen: der Schwingfestigkeitsauslegung und periodischen Inspektionen. Ausgehend von einem Schadensfall, der gebrochenen ICE 3-Welle von Köln, 2008, werden ausgewählte Aspekte dieser beiden Säulen diskutiert und Vorschläge zur weiteren Verbesserung gemacht. Diese betreffen u. a. Fragen einer Betriebszeitbegrenzung, Veränderungen der Schwingfestigkeit während des Betriebs infolge von Korrosion und Steinschlag, den Einfluss von Korrosion auf Schwingrissinitiierung und -fortschritt, den potenziellen Einfluss nichtmetallischer Einschlüsse auf die Schwingfestigkeit, die Möglichkeiten, sie im Rahmen der Qualitätssicherung zu detektieren, sowie Fragen der Bruchmechanik und der Zuverlässigkeit zerstörungsfreier Schwingriss-Prüfverfahren im Rahmen eines Konzepts regelmäßiger Inspektionen.
Faserverbundwerkstoffe (Komposite) zeigen außergewöhnliche Veränderungen ihrer Eigenschaften in Abhängigkeit von der Betriebsdauer. Daraus leitet sich auch die Notwendigkeit ab, eine Methode zu finden, die in der Lage ist, Festigkeiten und Restfestigkeiten von Komposit-Druckbehältern zu ermitteln. Dies kann mittels Lastwechselprüfung oder in anderen Fällen vorzugsweise mittels der langsamen Berstprüfung erfolgen. Für eine aussagekräftige Beschreibung der Festigkeit bedürfen die Ergebnisse beider Prüfverfahren einer statistischen Auswertung. Aber insbesondere die statistische Auswertung der berstbezogenen Festigkeitseigenschaften unterliegt neben der Frage der Stichprobengröße einer großen Unsicherheit mit enormen Folgen. Dies ist die Frage, welche Verteilungsfunktion der Streuung der Festigkeitseigenschaft konservativ zugrundegelegt werden darf. So ist zu untersuchen, ob die Gaußsche Normalverteilung (NV) die wahre Verteilung richtig beschreibt. Es könnten aber auch andere Funktionen, wie z. B. die Weibull-Verteilung notwendig sein, um eine Überschätzung der Überlebenswahrscheinlichkeit bzw. Zuverlässigkeit in dem interessanten Bereich von einem Ausfall pro 104 bis 108 Druckbehältern zu vermeiden.
The tradition of discussing the newest achievements in the consideration of NDE reliability was continued with the 5th European American Workshop on Reliability of NDE (5th EAW) in Berlin in 2013. The Focus of this workshop was to determine the 'delta' between the laboratorylike conditions, in which reliability assessments are usually carried out, and the everyday field conditions. Which obstacles need to be still overcome and how do we get closer with our estimations to the real field reliability? With the joint effort of international researchers and in-field practitioners the up-to-date research was presented and discussed, culminating in a half-a-day long 'Open Space Technology' discussion. This paper presents the main conclusions of the workshop.
Since the beginnings of the European American Workshops (EAW) in 1997, the aim was to gather the experts in NDE reliability and discuss burning topics with the aim of identifying crucial problems and suggesting ways to move forward. This was usually achieved during the so-called break-out sessions, in which predetermined topics were discussed. During the 5th EAW, held in Berlin in 2013, this approach was replaced by an Open Space Technology (OST) approach. The benefit of this approach is seen in the freedom of topic choices, i. e., the topics are not predetermined but rather arise at that moment in that space and by the participants choice. The following topics arose: new reliability methods (Bayesian, MAPOD,
), structural health monitoring, definition of requirements of NDE by customer versus provider, what value of POD is good enough?, human factors, manual versus automated inspection, and basic concepts of reliability of NDE. The participants were encouraged to walk from one session to another and openly express their opinions. These were in the end summarized by a chosen group of moderators and presented in this paper.
The focus of NDT reliability research in the past was in the field of two high risk industries: (atomic) power plants and aircrafts. The responsible organizations have been well aware of the risks and founded projects to understand and optimize critical steps during production, operation and maintenance. But the use of NDT is not limited to these two fields. The risks during operation of chemical plants, trains or windmills are different from the area above but evident. The coverage by legal regulations is relatively low. Instead of this owner responsibility, product liability and financial issues are the driving forces to do inspections and to use non-destructive testing. The different targets and financial issues influence the practice of NDT-inspections. A survey of this practice and its results are shown.