7.6 Korrosion und Korrosionsschutz
Filtern
Dokumenttyp
- Vortrag (35)
- Beitrag zu einem Tagungsband (7)
- Zeitschriftenartikel (4)
Schlagworte
- Korrosion (20)
- Trinkwasser (12)
- Hygiene (8)
- Corrosion (7)
- Crevice corrosion (7)
- Stainless steel (6)
- Additive Fertigung (5)
- Drinking water (5)
- Werkstoffe (5)
- Hygienische Bewertung (4)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (35)
In the late 1980s, a new type of corrosion appeared in drinking water installations where galvanized steel pipes failed forming a deep groove with no corrosion at the other surfaces. The reason was discussed quite fiercely between failure analysts and material suppliers. In the end the discussion lead to the solution: inductive welded pipes of a certain sulphur content were prone to selective corrosion. The history of the arguments is discussed using old communications between Wilhelm Schwenk and Wolfgang Stichel, who later published the results in a paper unfortunately only I german.
Thus the knowledge got lost and new cases based on the same material problems are observed in application of so-called C-Steel piping systems. Failure cases are shown.
In the late 1980s, a new type of corrosion appeared in drinking water installations where galvanized steel pipes failed forming a deep groove with no corrosion at the other surfaces. The reason was discussed quite fiercely between failure analysts and material suppliers. In the end the discussion lead to the solution: inductive welded pipes of a certain sulphur content were prone to selective corrosion. The history of the arguments is discussed using old communications between Wilhelm Schwenk and Wolfgang Stichel, who later published the results in a paper unfortunately only I german.
Thus the knowledge got lost and new cases based on the same material problems are observed in application of so-called C-Steel piping systems. Failure cases are shown.
Kaltwasserzirkulationssysteme haben sich in diversen Bereichen (Kliniken, Hotels, Schiffsbau usw.) etabliert. Die hydraulische Funktionsweise und das Berechnungsverfahren orientieren sich an der bewährten Warmwasser-Zirkulation, dennoch besteht für dieses „neue System“ eine gewisse Einführungsskepsis. Die elementare Anforderung der Trinkwasserverordnung (TrinkwV) besteht darin, dass „Trinkwasser […] so beschaffen sein [muss], dass durch Genuss oder Gebrauch eine Schädigung der menschlichen Gesundheit […] nicht zu besorgen ist.“ Diese Anforderung gilt als erfüllt, wenn mindestens die allgemein anerkannten Regeln der Technik (a.a.R.d.T.) bei Planung, Bau und Betrieb einer Trinkwasser-Installation eingehalten werden, das Trinkwasser den mikrobiologischen, chemischen, radiologischen Anforderungen der TrinkwV entspricht und es rein und genusstauglich ist. Da die Kaltwasserzirkulation aktuell noch dem Stand der Technik zuzuschreiben ist und die Einhaltung chemischer Anforderungen in Bezug auf erhöhte Schwermetallmigration in der Diskussion steht, wurden entsprechende chemische Parameter in Bestandsanlagen untersucht. Die Ergebnisse werden nachfolgend vorgestellt und sollen Betreibern, Fachplanern und ausführenden Fachunternehmen die Vorteile des Systems aufzeigen und Unsicherheiten ausräumen.