Chemie und Prozesstechnik
Filtern
Erscheinungsjahr
- 2019 (235) (entfernen)
Dokumenttyp
- Vortrag (122)
- Beitrag zu einem Tagungsband (42)
- Zeitschriftenartikel (38)
- Posterpräsentation (26)
- Dissertation (2)
- Sonstiges (2)
- Buchkapitel (1)
- Tagungsband (Herausgeberschaft für den kompletten Band) (1)
- Forschungsdatensatz (1)
Sprache
- Englisch (138)
- Deutsch (95)
- Mehrsprachig (1)
- Russisch (1)
Schlagworte
- Ultraschall (19)
- NDT (16)
- Concrete (15)
- Ultrasound (15)
- Zerstörungsfreie Prüfung (15)
- LIBS (10)
- Human Factors (9)
- Beton (8)
- Monitoring (8)
- Additive Fertigung (7)
- Lamb waves (7)
- Rail inspection (7)
- Super resolution (7)
- Thermografie (7)
- Additive manufacturing (6)
- Chloride (6)
- Computed tomography (6)
- Eddy current testing (6)
- Laser thermography (6)
- Luftultraschall (6)
- Reliability (6)
- Simulation (6)
- Thermography (6)
- VCSEL array (6)
- Wirbelstromprüfung (6)
- ZfP (6)
- Feuchte (5)
- Joint sparsity (5)
- Radar (5)
- Scaled Boundary Finite Element Method (5)
- Structural Health Monitoring (5)
- Virtual wave (5)
- X-ray computed tomography (5)
- 1d laser (4)
- Atmospheric pressure plasma (4)
- Bauwesen (4)
- Embedded sensors (4)
- Ferroelectret (4)
- Geführte Wellen (4)
- High-power laser (4)
- Imaging (4)
- Künstliche Bewitterung (4)
- Laser array (4)
- Measurement (4)
- NMR (4)
- Non-Destructive Testing (4)
- Non-destructive testing (4)
- Nondestructive Testing (4)
- Thermoacoustics (4)
- Wirbelstrom (4)
- ZfP 4.0 (4)
- Air-coupled transducers (3)
- Artificial neural networks (3)
- Building materials (3)
- Cement (3)
- Coda wave interferometry (3)
- Concrete bridges (3)
- Datenfusion (3)
- Defect detection (3)
- Enriched finite element method (3)
- Finite element analysis (3)
- Industrielle Radiographie (3)
- Kunststoffe (3)
- Laminography (3)
- Laser Thermography (3)
- MOF (3)
- Mapping (3)
- Material moisture (3)
- Micro hollow cathode discharge (3)
- Multilayered structures (3)
- Neutronensonde (3)
- Nondestructive testing (3)
- Phased Array (3)
- Schädigung (3)
- Structural safety (3)
- Thermoakustik (3)
- Ultrasonic Guided Waves (3)
- Ultrasonic Testing (3)
- X-ray back scattering (3)
- Absorption edge tomography (2)
- Adhesive joint (2)
- Air-coupled (2)
- Air-coupled ultrasound (2)
- Axle Inspection (2)
- BAMline (2)
- Berührungsloser Ultraschall (2)
- Bildqualitätsnachweis (2)
- Brücken (2)
- CFK (2)
- CFRP (2)
- COD-AGE (2)
- Cellular polypropylene (2)
- Civil engineering (2)
- Composite (2)
- Composite-Druckgefäß (2)
- Composites (2)
- Compressed Sensing (2)
- Computed Tomography (2)
- Corresponding relative humidity (2)
- Cracks (2)
- Damage (2)
- Damage assessment (2)
- Delamination (2)
- Dimension reduction (2)
- Education (2)
- Elektretwandler (2)
- Failure Modes and Effects Analysis (2)
- Faserverbundwerkstoff (2)
- Ferroelektret (2)
- Fiber reinforced polymer (2)
- Fluidischer Oszillator (2)
- Focal spot measurement (2)
- Fourier transform (2)
- Frequenzanalyse (2)
- Full Matrix Capture (2)
- Fußboden (2)
- Geführte Ultraschallwellen (2)
- Guided Waves (2)
- HPC (2)
- High speed (2)
- Impact damage (2)
- International Institute of Welding (2)
- Luftgekoppelter Ultraschall (2)
- Mechanical strength (2)
- Messunsicherheit (2)
- Modelling (2)
- Moisture clog (2)
- Moisture transport (2)
- Multi-layered system (2)
- Nonlinear (2)
- POD (2)
- Phased array probes (2)
- Photon counting detector (2)
- Plasma (2)
- Plasma acoustics (2)
- Probability of Detection (2)
- Procedure (2)
- Pulsed thermography (2)
- Quality assurance (2)
- Radiographie (2)
- Radiographische Prüfung (2)
- Railway (2)
- Reassessment (2)
- Reference specimen (2)
- Reinforced concrete (2)
- Richtcharakteristik (2)
- Rissbildung in Stahl (2)
- SBFEM (2)
- Scaled Boundary FEM (2)
- Scaled boundary finite element method (2)
- Schallemission (2)
- Signalmerkmale (2)
- Singular stress (2)
- Spectroscopy (2)
- Sulphate (2)
- Super Resolution (2)
- Survey (2)
- Synchrotron tomography (2)
- Synthetic Aperture Focusing Technique (2)
- Total Focusing Methode (2)
- Training (2)
- VCSEL (2)
- Validation (2)
- Verschlussbauwerk (2)
- Wandlercharakterisierung (2)
- Wasserstoffspeicher (2)
- Wavefield analysis (2)
- Wellenprüfung (2)
- Wind energy (2)
- Wood (2)
- X-Ray tube (2)
- X-ray CT (2)
- X-ray reflectivity (2)
- X-ray refraction (2)
- Zuverlässigkeit (2)
- coda wave interferometry (2)
- 2D model (1)
- 3D Druck (1)
- 3D particle analysis (1)
- 3D printing (1)
- 3D visualization (1)
- 3D-Verformungsmessung (1)
- AET (1)
- ASIC (1)
- Acoustic Emission (1)
- Acoustic Emission (AE) (1)
- Acoustic Emission Monitoring (1)
- Acoustic emitter (1)
- Acoustic sensors (1)
- Acoustic-Structure Interaction (1)
- Acoustic-structure interaction (1)
- Active thermography (1)
- Additive Manufacturing (1)
- Ageing (1)
- Air coupled ultrasound (1)
- Aluminum alloy (1)
- Amplitudenverhältnisse (1)
- Analytical model (1)
- Analyzer-based imaging (1)
- Anisotropic fiber orientation (1)
- Anisotropy estimate (1)
- Arbitrary trajectories (1)
- Array (1)
- Arraysensoren (1)
- Art restauration (1)
- Artificial weathering (1)
- Atomic and molecular mapping (1)
- Ausbildung (1)
- Autocorrelation (1)
- Automobilindustrie (1)
- Autonome Systeme (1)
- Backlighting (1)
- Beam hardening (1)
- Bildqualität (1)
- Blind structured illumination (1)
- Brennfleck (1)
- Brennfleckmessung (1)
- Brückenbauwerke (1)
- Capillary suction (1)
- Cement-based materials (1)
- Chemometics (1)
- Chemometrics (1)
- Chlorid (1)
- Classification (1)
- Codawelleninterferometrie (1)
- Cold to fast neutron testing (1)
- Composite pressure vessel (1)
- Compressed sensing (1)
- Computed Radiography (1)
- Computer-Tomographie (1)
- Computertomografie (1)
- Computertomographie (1)
- Cone Shaped Phased Array (1)
- Corrosion (1)
- Crack (1)
- DGZfP-Richtlinien (1)
- DICONDE (1)
- DIRECTT (1)
- DVC (1)
- Damage characterization (1)
- Damage detection (1)
- Data Analysis (1)
- Data Processing (1)
- Data processing (1)
- Data reconstruction (1)
- Datenanalyse (1)
- Deconvolution (1)
- Deep penetration (1)
- Dickenbestimmung (1)
- Diffraction Enhanced Imaging (1)
- Diffuse dielectric barrier discharges (1)
- Digital Industrial Radiology (1)
- Digital detector array (1)
- Digitale Bildkorrelation (DVC) (1)
- Digitale Radiographie (1)
- Digitaler Filmersatz (1)
- Digitalisierung (1)
- Direktumwandelnde Detektoren (1)
- Distributed fiber optic sensors (1)
- Dual Energy Imaging (1)
- Dual energy (1)
- Dual-Energy (1)
- Dual-energy (1)
- Eddy current (1)
- Eexisting structures (1)
- Eingebettete Sensorik (1)
- Eisenbahnschienen (1)
- Electric impedance (1)
- Electrical impedance (1)
- Electrochemical deposition (ECD) (1)
- Endlager (1)
- Endlagerung (1)
- Energieauflösende Detektoren (1)
- Engineered Barrier System (EBS) (1)
- Evaluation (1)
- Evaporative drying (1)
- Existing bridges (1)
- FEM (1)
- Faseropische Sensorik (1)
- Faseroptische Sensorik (1)
- Faserverbundwerkstoffe (1)
- Faserverstärkter Beton (FRC) (1)
- Fatigue (1)
- Feuchtigkeitsmessung (1)
- Fiber Bragg grating (FBG) (1)
- Fiber optic sensing (1)
- Fiber-reinforced concrete (1)
- Fibre Orientation Analysis (1)
- Fibre-Reinforced Concrete (FRC) (1)
- Filmersatz (1)
- Filtered back projection (1)
- Finite-element analysis (1)
- Fire Performance (1)
- Flat bottom holes (1)
- Flow Chemistry (1)
- Fluidic oscillator (1)
- Fluidische Anregung (1)
- Fluidische Oszillatoren (1)
- Flüssigwasser (1)
- Foundation (1)
- Frequenzmodulation (1)
- GFRP (1)
- GMR (1)
- GMR-Sensoren (1)
- Gas discharges (1)
- General Assembly (1)
- Giant magneto resistance (1)
- Glass paints (1)
- Guided waves (1)
- Guss (1)
- Heat diffusion (1)
- Heißluftquelle (1)
- Heterogeneous material (1)
- High Speed Testing (1)
- High resolution (1)
- Higher order FEM (1)
- Hollow Axle Inspection (1)
- Hydrogen storage (1)
- Hygrometrie (1)
- Image Processing (1)
- Image processing (1)
- Impakt-Schaden (1)
- Implant (1)
- Implants (1)
- In-situ Prüfverfahren (1)
- In-situ testing (1)
- Industrie 4.0 (1)
- Inline NMR Spectroscopy (1)
- Integrated Processes (1)
- Integrity testing (1)
- Interdigital Transducer (1)
- Inverse analysis (1)
- Irradiation (1)
- Joints (1)
- KDA Training (1)
- Kalziumsilikat (1)
- Keramik (1)
- Kirchhoff (1)
- Klassifizierung (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kontaktloses Impakt-Echo (1)
- Koordinatenmessung (1)
- Korrosion (1)
- Kotakttechnik (1)
- LAUS (Large Apertur Ultrasonic System) (1)
- Laminographie (1)
- Large Aperture Ultrasonic System (LAUS) (1)
- Laser (1)
- Laser Metal Deposition (LMD) (1)
- Laser powder bed fusion (1)
- Laser-Doppler-Vibrometer (1)
- Laser-Thermografie (1)
- Laser-induced breakdown spectroscopy (LIBS) (1)
- Laserthermografie (1)
- Lehrplan (1)
- Lehrplan Universität (1)
- Luftgekoppelt (1)
- MAPOD (1)
- MFC (1)
- MMI (1)
- Machine Learning (1)
- Magnetfeldsensoren (1)
- Magnetoresistive sensor (1)
- Maschinelles Lernen (1)
- Matrix array (1)
- Mechanical properties (1)
- Mechanisierte Schienenprüfung (1)
- Mehrfachreflexion (1)
- Metal Magnetic Memory (1)
- Metal matrix composite (1)
- Metall-Matrix-Komposit (1)
- Metrology (1)
- Microstructural analysis (1)
- Mikro-Computertomographie (1)
- Mikropartikel (1)
- Mobile Plattform (1)
- Mobile system (1)
- Modular Production (1)
- Morsleben Repository (ERAM) (1)
- Multiple Lineare Regression (1)
- Multivariate calibration (1)
- NDE (1)
- NDT 4.0 (1)
- NDT Monitoring (1)
- NMR relaxometry (1)
- Nachrechnung (1)
- Nachrechnungsrichtlinie (1)
- Natural gas (1)
- Neutron Imaging (1)
- Neutron imaging (1)
- Non-invasive glucose sensing (1)
- Nondestructive tesing (1)
- Normung (1)
- Notches (1)
- Nuclear Structures (1)
- Nuklear magnetische Resonanz (1)
- Numerical Modelling (1)
- Numerical modelling (1)
- Numerical simulation (1)
- On-site (1)
- Online monitoring (1)
- Onlinemonitoring (1)
- Ontology (1)
- Opaque materials (1)
- Optical fibers (1)
- PVDF (1)
- Paper watermark (1)
- Part geometry (1)
- Part material (1)
- Partial volume effect (1)
- Partiallly saturated pores (1)
- Partially saturated pores (1)
- Personalzertifizierung (1)
- Personnel Education (1)
- Phased array (1)
- Photon Counting Detectors (1)
- Photon counting detectors (1)
- Photonenzählende Detektoren (1)
- Photoplethysmography (1)
- Photothermal (1)
- Pile (1)
- Pile testing (1)
- Pipeline (1)
- Polyethylen (1)
- Polymer (1)
- Polymere (1)
- Polymers (1)
- Polypropylene Fibres (1)
- Pore size distribution (1)
- Porengrößenverteilung (1)
- Porous building materials (1)
- Porous ceramics (1)
- Porous materials (1)
- Prediction from system parameters (1)
- Pressure Vessels (1)
- Pressure tanks (1)
- Process Analytical Technology (1)
- Projection matrix (1)
- Quantenpunkte (1)
- Quantification (1)
- Quantitative moisture measurement (1)
- Quellfleckgröße (1)
- RFID based sensors (1)
- RTM (1)
- Radiation shielding (1)
- Radiografie (1)
- Radiographic Testing (1)
- Radiographic testing (1)
- Radiography (1)
- Radiography based weld inspection (1)
- Radiology (1)
- Radsatzwellen (1)
- Reaction Monitoring (1)
- Reconstruction (1)
- Refracto-vibrometry (1)
- Refraktovibrometrie (1)
- Relative Luftfeuchte (1)
- Repair patch (1)
- Requirements of Standards (1)
- Residual stress (1)
- Reverse Time Migration (RTM) (1)
- Revision of ISO 24497 (1)
- Riesenmagnetwiderstand (1)
- Roboter (1)
- Röntgenbeugung (1)
- Röntgencomputertomographie (CT) (1)
- Röntgenrefraktion (1)
- Röntgenröhre (1)
- Röntgenröhren (1)
- Röntgenrückstreuung (1)
- Salzbeton (1)
- Sandstein (1)
- Sandstone (1)
- Sandstones (1)
- Saturation (1)
- Scaled boundary finite element method; Stress intensity factors (1)
- Schaden Quantifizierung (1)
- Schichtaufbau (1)
- Schienenprüfung (1)
- Schmiedeteile (1)
- Screed (1)
- Semitransparent (1)
- Sensorik (1)
- Shaker (1)
- Signal Analysis (1)
- Spectral induced polarization (1)
- Stahlbeton (1)
- Stained glass windows (1)
- Stand der Normung (1)
- Stand der Technik (1)
- Standadization (1)
- Standardisierung (1)
- Standardisierung bei DIN, CEN und ISO (1)
- Standardization (1)
- Standards (1)
- Static Mixing (1)
- Status in Germany (1)
- Stress intensity factors (1)
- Stress singularities (1)
- Stress strain relations (1)
- Streuflussprüfung (1)
- Structural Integrity (1)
- Structural health monitoring (1)
- Structural integrity (1)
- Structure-property relationship (1)
- Structured heating (1)
- Sub-Commission V-A (1)
- Subsurface defects (1)
- Super-resolution imaging (1)
- Surface relaxivity (1)
- Surface roughness analysis (1)
- Synchrotron Radiation (1)
- TFM (1)
- THz-TD-SAFT (1)
- THz-TDS (1)
- THz-Tommographie (1)
- TRISO (1)
- Tauchtechnik (1)
- Thermal Waves (1)
- Thermal wave (1)
- Three-dimensional measurement (1)
- Thymolblau (1)
- Tomographie, (1)
- Tomography of wood samples (1)
- Transportwesen (1)
- UT-Ausbildung (1)
- UV/VIS spectroscopy (1)
- Ultraschallprüfung (1)
- Ultraschallwellen (1)
- Ultrasonic echo (1)
- Ultrasonic guided waves (1)
- Ultrasonic imaging (1)
- Ultrasonic transducers (1)
- Ultrasonic-Echo Borehole Probe (1)
- Uncertainty (1)
- Validation studies (1)
- Verschiebungsfeld (1)
- Vibrational spectroscopy (1)
- Vibrometer (1)
- Virtuelle Welle (1)
- Visibility of Indications (1)
- Vitual computer tomography simulation (1)
- Vor-Ort-Untersuchung (1)
- Vorlaufkeile (1)
- Wandler (1)
- Water layer thickness (1)
- Water transport (1)
- Wavelet transformation (1)
- Wellenausbreitung (1)
- Wirbelstromsenoren (1)
- Wood Materials (1)
- Wood materials (1)
- X-ray (1)
- X-ray Computed Tomography (CT) (1)
- X-ray Computer-tomography simulation (1)
- X-ray Radiography (1)
- X-ray caustics (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- X-ray imaging (1)
- Zeitaufgelöste THz-Spektroskopie (1)
- Zerstörungsfreien Prüfung (1)
- ZfP im Bauwesen (1)
- ZfP-Ausbildung (1)
- Zugprüfungen (1)
- Zustandsüberwachung (1)
- aRTist (1)
- additive manufacturing (1)
- agricultural economy (1)
- embedded sensor (1)
- environment (1)
- fluorescence (1)
- gas analysis (1)
- pH-Monitoring (1)
- spectroscopy (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (235) (entfernen)
Eingeladener Vortrag
- nein (122)
Modern wind turbine rotor blades consist of sandwich shell segments made from glass fiber reinforced polymers. During manufacturing, defects can arise which could lead to failure of the whole component under dynamic mechanical and thermal loads. Hence during operation defects can arise which, if detected, can be repaired locally and in-situ by applying repair patches instead of taking the whole rotor blade down and repair it remotely. This method is much more time and cost effective, since the shut-down time of the energy converter is limited to a minimum. These repair patches can, however, also lead to new defects if not applied optimally. Therefore, it is necessary to control the quality of the repair patches to ensure the best possible restoration of structural integrity of the component. As a rotor blade is an object with a large aspect ratio, X-ray laminography is predestined to provide 3D information of the objective volume. To enhance the amount of information gained from laminographic reconstruction, we use in this study a photon counting and energy discriminating X-ray detector and apply a material decomposition algorithm to the data. By inherently separating the incident spectra within the detection process into two distinct energy bins, the basis material decomposition can provide material resolved images. Choosing glass and epoxy resin as basis materials and numerically solving the inverse dual-energy equation system, the reconstructed laminographic datasets contain highly valuable information about the distribution of the basis materials within the structure. Furthermore, cross- artifacts arising from the limited angle of the projection data can be reduced by this method which allows to investigate structures that were hidden underneath the artefacts.
Modern wind turbine rotor blades consist of sandwich shell segments made from glass fiber reinforced polymers. During manufacturing, defects can arise which could lead to failure of the whole component under dynamic mechanical and thermal loads. Hence during operation defects can arise which, if detected, can be repaired locally and in-situ by applying repair patches instead of taking the whole rotor blade down and repair it remotely. This method is much more time and cost effective, since the shut-down time of the energy converter is limited to a minimum. These repair patches can, however, also lead to new defects if not applied optimally. Therefore, it is necessary to control the quality of the repair patches to ensure the best possible restoration of structural integrity of the component. As a rotor blade is an object with a large aspect ratio, X-ray laminography is predestined to provide 3D information of the objective volume. To enhance the amount of information gained from laminographic reconstruction, we use in this study a photon counting and energy discriminating X-ray detector and apply a material decomposition algorithm to the data. By inherently separating the incident spectra within the detection process into two distinct energy bins, the basis material decomposition can provide material resolved images. Choosing glass and epoxy resin as basis materials and numerically solving the inverse dual-energy equation system, the reconstructed laminographic datasets contain highly valuable information about the distribution of the basis materials within the structure. Furthermore, cross- artifacts arising from the limited angle of the projection data can be reduced by this method which allows to investigate structures that were hidden underneath the artefacts.
The simulator aRTist combines analytical and Monte Carlo methods to efficiently model the radiographic process of industrial radiology. In this contribution we focus on virtual computer tomography, the simulation of tomographic scans. The possibilities to simulate complex scanning trajectories are shown in combination with the tomographic reconstruction using individual projection matrices.
Virtual CT acquisition and reconstruction of complex and noisy scanning trajectories in aRTist
(2019)
In modern CT imaging, simulation has become an important tool to minimize cost- and time-intensive measurements. It is increasingly used to optimize techniques for complex applications, to support the preparation of written procedures, and for educational purposes. We extended the CT simulation software ‘aRTist’ with a module to set-up arbitrary trajectories including disturbing influences during the scan. Moreover, such geometric deviations can be compensated by the internal reconstruction tool.
Die thermografische ZfP basiert auf der Wechselwirkung von thermischen Wellen mit Inhomogenitäten. Diese Inhomogenitäten hängen mit der Probengeometrie oder der Materialzusammensetzung zusammen. Obwohl die Thermografie für ein breites Spektrum von Inhomogenitäten und Materialien geeignet ist, ist die grundlegende Einschränkung die diffuse Natur der thermischen Wellen und die Notwendigkeit, ihre Wirkung lediglich an der Probenoberfläche radiometrisch messen zu können. Die Ausbreitung der thermischen Wellen von der Wärmequelle über die Inhomogenität zur Detektionsoberfläche führt zu einer Verschlechterung des räumlichen Auflösungsvermögens der thermografischen Technik. Ein neuer konzertierter Ansatz auf Basis einer räumlich strukturierten Erwärmung und einer Joint Sparsity des Signalensembles ermöglicht eine verbesserte Rekonstruktion von Inhomogenitäten.
Im Beitrag wird die Implementierung dieses Ansatzes auf Basis einer strukturierten Beleuchtung mit einem 1D-Laser-Array vorgestellt. Die einzelnen Emitterzellen des Laser-Arrays werden durch ein pseudozufälliges Binärmuster gesteuert und zusätzlich leicht verschoben. Die wiederholte Messung dieser verschiedenen Konfigurationen bei gleichzeitig konstanter Inhomogenität ermöglicht eine Rekonstruktion der Inhomogenität unter Ausnutzung der Joint Sparsity.
Im weitverbreiteten Fall der thermografischen ZfP sollen Defekte im Probeninneren detektiert werden. Da diese eine Inhomogenität darstellen, genügt jegliche Mess- und Datenverarbeitungstechnik, die diese Inhomogenität als Kontrast in der transienten Temperaturverteilung herausarbeitet. Ein üblicher Ansatz ist eine extrem kurze und intensive Blitzlampenbeleuchtung zusammen mit einer nachträglichen Fourier-Transformation zu verwenden. Für die zusätzliche Tiefenbestimmung werden entweder rein phänomenologische Ansätze, semi-analytische Ansätze mit Kalibrationsmessungen oder Fits an analytische bzw. numerische Modelle verwendet. Ein üblicher semi-analytischer Ansatz ist z.B. die Analyse des Abknickens der transienten Abkühlkurve. Problematisch ist das schnelle Abklingen der Amplitude auf Rauschniveau und damit die inhärente Beschränkung der Tiefenreichweite. Eine äquivalente Beschreibung der Wärmeleitung ist über sehr stark gedämpfte thermische Diffusionswellen möglich. Die Eindringtiefe ist dann gleich der thermischen Diffusionslänge. Der semi-analytische Ansatz über normales Least-Squares-Fitting funktioniert für 1D-Schicht-Systeme sehr gut, versagt aber für höherdimensionale Messprobleme. Genau hier setzt eine seit Kurzem bekannte Transformation der diffusen Temperaturentwicklung (bzw. des Realteils der Diffusionswelle) in eine propagierende virtuelle Temperaturwelle an. Dieses sog. Virtual-Wave-Konzept stellt sich selbst als ein weiteres inverses Problem dar. Der Nutzen dieser in einer linearen virtuellen Zeitdomäne propagierenden Welle überkompensiert den numerischen Mehraufwand jedoch deutlich. Zusammen mit neuen Technologien in der Erwärmung durch Hochleistungs-Laser-Arrays und in der Datenakquisition durch kHz-Kameras erlaubt dieser Ansatz eine signifikante Verbesserung der Tiefenreichweite in der Impuls-Thermografie. Im Beitrag werden experimentelle Ergebnisse an einer additiv hergestellten Metallprobe mit überdeckten Schlitzen vorgestellt, die eine Detektion dieser Defekte bis zu einem Seitenverhältnis von Defektbreite/Defekttiefe ~ 0,25 erlauben, also ca. 4 mal tiefer als die übliche Faustformel.
Usability of the written procedures: an eye tracking study Non-destructive evaluation (NDE) is regarded as one of the key elements in ensuring quality of engineering systems and their safe use. A failure of NDE to detect critical defects in safety-relevant components, such as those in the nuclear industry, may lead to catastrophic consequences for the environment and the people. NDE inspection procedure is one of the most important tools in the everyday life of an NDE inspector. Experience and research studies have shown that NDE procedures are not always used as foreseen and may need to be optimized. Both the content and format play an important role in producing reliable procedures. Whereas the content aids in the understanding of the task and in its subsequent correct execution, the format determines the efficiency and frequency of the procedure’s use.
For the purposes of this study, an inspection procedure - designed to be used in the inspection of components used in the final disposal of spent nuclear fuel - was further developed by adopting a user-centered design. This was achieved by following the eye movements during a data evaluation task whilst using the procedure, by interviews and group discussions, accompanied by a review from a human factors’ perspective, the suggestions from relevant literature and by reiterating the entire process once again. This process resulted in identifying shortcomings and in suggesting alterations to the existing procedure. The newly created procedure was empirically tested for its usability using eye tracking. By comparing the old instruction format to the newly developed one, the results showed that appropriately highlighting warnings, exceptions, or reminders, and placing them at a logical position assures that they will be read and identified with ease rather than overlooked. The presentation of the information in a stepwise manner, with one action per step, allows the user to follow more easily the steps that must be carried out to save time and effort.
This study - the first of its kind in the field of non-destructive evaluation - showed that the procedure can be improved by applying human factors principles to the design and by involving the users into the process of procedure development and quality assurance.
Introduction of the speaker – Marija Bertovic
Marija Bertovic has a degree in psychology and a PhD in human factors. Since 2006 she has been working on topics related to human factors in non-destructive testing at the BAM Federal Institute for Materials Research and Testing, German Society for Non-Destructive Testing and as an independent consultant. The focus of her research has been on identifying and studying human factors’ related risks during NDT inspections and suggesting ways of optimizing the inspections and inspection procedures. She is currently a research staff member at BAM responsible for probabilistic safety and reliability analyses AND human factors analyses. She is the chairwoman of the German Society for Non-Destructive Testing’s (DGZfP) subcommittee on human machine interaction and the winner of the DGZfP Science Award in 2018.
Das elektromagnetische Radarverfahren ist mit seiner starken Sensitivität für Wasser längst eine etablierte Methode zur zerstörungsfreien Feuchtemessung. Besonders bei geophysikalischen Aufgabenstellungen erfreut es sich großer Beliebtheit, doch auch an Baustoffen wird es immer häufiger zur Ortung von schadensträchtigem Wasser eingesetzt. Somit liefert die Literatur bereits zahlreiche Signalmerkmale, welche einen Rückschluss auf die Feuchte des untersuchten Mediums zulassen. Die Eignung dieser Signalmerkmale zur Messung an Estrichen wurde in Laborstudien anhand des Austrocknungsprozesses nach der Herstellung untersucht. Hierbei kamen zement- und anhydritgebundene Estriche unterschiedlicher Schichtdicke zum Einsatz, wobei die Darr- und die Calciumcarbid-Methode als Referenzverfahren dienten. In der Auswertung erwiesen sich besonders die klassischen Merkmale aus dem Zeitbereich (Amplitude, Laufzeit) als robuste Methoden zur Feuchtemessung. Bei kleinen Schichtdicken und niedrigen Feuchtegehalten ist die Auswertung der klassischen Merkmale jedoch fehleranfällig, v.a. weil die (automatisierte) Separierung von direkter und Reflexionswelle nicht mehr eindeutig ist. Dies wirkt sich besonders auf die jeweiligen Frequenzanteile aus, die i.d.R. nicht zu den klassischen Feuchte-Merkmalen gehören. In weiterführenden Untersuchungen soll der Mehrwert durch multivariate Datenauswertung und Ansätze des maschinellen Lernens geprüft werden. Übergeordnetes Ziel ist der Einsatz des Radarverfahrens an geschichteten Fußbodenaufbauten zur automatisierten und zerstörungsfreien Lokalisierung von Feuchteschäden.
Additiv gefertigte Prüfkörper aus Polyamid 12 (Laser Sinter Verfahren) und Acrylnitril-Butadien-Styrol (Fused Layer Modeling Verfahren) wurden über 2000 Stunden künstlich bewittert und ihr Alterungsverhalten untersucht. Die Ergebnisse wurden anschließend mit denen von Prüfkörpern verglichen, welche auf dieselbe Weise künstlich bewittert, aber mittels konventionellem Kunststoff-Spritzguss hergestellt wurden.
Die Erkenntnisse dienen für die Entwicklung einer Strategie für eine Qualitätskontrolle von additiv gefertigten Kunststoffteilen.
For more than 60 years ultrasonic rail inspection is used as non-destructive testing method to ensure the safe operation of rail tracks. Constantly increasing traffic density and heavy loads have been the motor for the development of new test equipment from handheld devices to rail inspection trains. (Krull 2003)Up to the present most of the system solutions feature conventional ultrasonic transducers housed in wheel-type and slide-type probes. Different tasks have to be carried out during an in-service inspection for flaws in the rail head, rail web and rail foot as well as rolling contact fatigue (Heckel 2018). The more tasks the inspection system has to perform, the more probes are needed. Compared against standard ultrasonic testing methods the application of array probes offers advantages and flexibility by the electronic steering possibilities to control the transmitted and received sound fields. This allows to increase functionality by software while decreasing the number of probes needed in hardware in parallel. One drawback in application of phased array probes is that the repetition frequency of the subsequent measurements will be reduced by the number of virtual probe functions each phased array probe has to perform. This may limit the range of use for phased array probes in high speed applications. To overcome these limits special designs for array probes and signal processing are necessary.
For more than 60 years ultrasonic rail inspection is used as non-destructive testing method to ensure the safe operation of rail tracks. Constantly increasing traffic density and heavy loads have been the motor for the development of new test equipment from handheld devices to rail inspection trains. (Krull 2003)Up to the present most of the system solutions feature conventional ultrasonic transducers housed in wheel-type and slide-type probes. Different tasks have to be carried out during an in-service inspection for flaws in the rail head, rail web and rail foot as well as rolling contact fatigue (Heckel 2018). The more tasks the inspection system has to perform, the more probes are needed. Compared against standard ultrasonic testing methods the application of array probes offers advantages and flexibility by the electronic steering possibilities to control the transmitted and received sound fields. This allows to increase functionality by software while decreasing the number of probes needed in hardware in parallel. One drawback in application of phased array probes is that the repetition frequency of the subsequent measurements will be reduced by the number of virtual probe functions each phased array probe has to perform. This may limit the range of use for phased array probes in high speed applications. To overcome these limits special designs for array probes and signal processing are necessary.
Ultrasonic transmission measurements are used to monitor concrete elements mostly on a laboratory scale since decades. Recently, coda wave interferometry, a technique adapted from seismology, has been introduced to civil engineering experiments. It can be used to reveal subtle changes in concrete samples and even large construction elements without having a transducer directly at the location where the change is taking place. The methodology works best with embedded transducers to avoid coupling issues or excessive environmental influence. These transducers can be used for newly built and existing structures. Recently, large concrete beams have been equipped with a network of transducers and loaded until failure. Using code wave interferometry, it was possible to visualize stress fields and damaged areas. This paper gives an overview of the state of the art, recent results achieved at BAM and a task list for further results and development.
Ultrasonic transmission measurements are used to monitor concrete elements mostly on a laboratory scale since decades. Recently, coda wave interferometry, a technique adapted from seismology, has been introduced to civil engineering experiments. It can be used to reveal subtle changes in concrete samples and even large construction elements without having a transducer directly at the location where the change is taking place. The methodology works best with embedded transducers to avoid coupling issues or excessive environmental influence. These transducers can be used for newly built and existing structures. Recently, large concrete beams have been equipped with a network of transducers and loaded until failure. Using code wave interferometry, it was possible to visualize stress fields and damaged areas. This paper gives an overview of the state of the art, recent results achieved at BAM and a task list for further results and development.
Ultrasonic non-destructive testing methods have found various applications in quality assurance and condition assessment of nuclear concrete structures. This includes but is not limited to the localization of construction features (thickness measurements, reinforcement, tendon ducts, and others) and damage detection (e. g. corrosion or cracks). However, there are still limitations, e. g. limited penetration depth and resolution, issues when testing hybrid steel/concrete structures as well as absence of standards and regulations.
This presentation will show progress in some of these issues and will focus on advanced instrumentation and validation of ultrasonic NDT for concrete structures.
Ultrasonic echo testing has been limited to a penetration depth of less than one meter in reinforced concrete. The development of the LAUS (Large Aperture Ultrasonic System), using a large array of ultrasonic transducers and wider offsets between transmitter and receiver, allows to reach up to 5 m in reinforced concrete and 9 m in unreinforced concrete. This capability has been demonstrated by collecting data from an engineered salt concrete barrier in an underground nuclear waste storage facility. Due to an increasingly competitive environment, commercial manufacturers will continue to develop equipment with enhanced penetration and/or increased resolution.
To quantify the capabilities and reliability of ultrasonic tests, validation mockups with engineered flaws are required. EPRI and BAM have built a large-scale mockup at a test site close to Berlin (BAM-TTS, Horstwalde) using a design which is repeated at other places. This presentation will also cover the methods deployed on engineered flaws and the repeatability of the test results.
Ultraschallmessverfahren werden seit Langem erfolgreich für Prüfaufgaben im Bauwesen eingesetzt. Die dauerhafte Überwachung und frühzeitige Erkennung von Schäden an komplexen Neubauten und alternder Infrastruktur kann mittels Ultraschall-Transmissionsmessungen und speziellen Auswertemethoden, wie z. B. Korrelationverfahren und Codawelleninterferometrie, realisiert werden. Für die Dauerüberwachung wurde ein kompaktes System entwickelt, das Ultraschall-Messdaten erfassen und ins Internet auf einen FTP-Server übertragen kann. Es können hierbei alle angeschlossenen Prüfköpfe für jede Messung wahlweise als Sender oder Empfänger geschaltet werden. Es wurden Vorverstärker entwickelt, bei denen die Versorgung mit Strom über die Messleitung erfolgt. Dadurch können die Verstärker nahe am Prüfkopf positioniert werden. Durch Änderungen in den Ultraschall-Signalen können Schädigungen des Bauteils, wie z.B. Risse, in Echtzeit erkannt werden.
Ultraschall-Echoverfahren an Betonbauteilen mit geneigten Rückwänden - Entwicklung von Testkörpern
(2019)
Mit dem Ultraschall-Echoverfahren können geometrische Abmessungen von Betonbauteilen bestimmt werden. Es hat sich gezeigt, dass die Bauteilrückwand bei der Messung an Massivbrücken häufig nicht planparallel zur Messfläche ausgeführt ist. Es wird erwartet, dass der Einfluss einer Neigung der Rückwand gegenüber der Messfläche auf die Messunsicherheit bei der Dickenbestimmung nicht vernachlässigbar ist. In diesem Beitrag werden die fünf konzipierten Betonprobekörper und ausgewählte Messergebnisse zur Bestimmung dieses Einflusses gezeigt.
Explosive spalling is caused by, among others, the thermohydraulic spalling mechanism. During this process, vaporization, dehydration, moisture-transport and condensation processes interact. As a result, a drying and dehydration zone as well as a saturated zone, known as a moisture clog, are observed inside the unilaterally-heated concrete. The presented research is focused on the experimental investigation of the underlying thermohydraulic processes.
To investigate these, a test methodology based on X-ray computed tomography (CT) and nuclear magnetic resonance (NMR) was developed. Thereby, the X-ray CT scans are carried out simultaneously during the application of a defined unilateral-heating regime on a specially-constructed specimen. This miniaturized specimen, equipped with a double-layer casing, reproduces the condition within a planar, unilaterally-heated building component.
A preliminary test methodology and the first experimental results were presented at the 5th International Workshop on Concrete Spalling in Borås, Sweden (2017). The contribution for the upcoming workshop presents an improved version of this test methodology and new results for a high-performance concrete (HPC) mixture exposed to temperatures up to 500 °C. Regarding the CT measurements, a higher time-resolution of 15 min was achieved and a quantification of the moisture changes was implemented. Due to an increase in signal quality of the NMR measurements, a pore-size specific moisture distribution can now be resolved. This allows to conclude about the moisture reconfiguration between small gel pores and larger interhydrate pores. Additionally, the NMR measurement are no longer limited to first 2.5 cm below the heated surface but a one-dimensional moisture distribution can now be estimated over the whole 10 cm long specimen.
The presented results demonstrate that the combination of X-ray CT and NMR measurements enables to image and quantify the thermally-induced moisture transport and reconfiguration from small gel pores up to macro pores. This provides important insights into the thermohydraulic damage mechanism and leads to a better understanding of spalling avoidance strategies, like the addition of polypropylene fibres.